Read Me Flags
Read Me Flags
Read Me Flags
http://www.navypaxsail.com/Flags.htm
This program was written to teach the flags of the International Code of Signals, used for
communicating at sea. It has four modes: Flag Quiz, Word Quiz, Show Words, and Flag
Meanings. Flag Quiz is the default when you launch the program. Click on the drop down list to
switch modes. The program keeps separate scores for each of the three quiz modes. In the current
version, there is no end, it just keeps going until you quit.
Flag Quiz is where you should start out if you dont know the individual flags. It will show you the
image of a random flag and ask you to identify it. Just type the letter or number that the flag
represents. To get you started, you can bring up the flag listing by clicking the Flags Help button.
In the box below, you will see the results of your previous answer. Check boxes allow you to
choose which sets of flags are included in the quiz; the default is just the ICS flags.
If you are shown a substitute flag, type <Shift> and the number of the substitute; i.e. !
(<Shift-1>) for the 1st sub, @ (<Shift-2>) for the 2nd sub, etc.
To enter the answer for a NATO signal flag, choose it from the dropdown list, then hit the <Enter>
key or click the Enter button. The easiest way to pick a NATO signal flag is to hit the <Tab> key to
highlight the dropdown list, and then type the first letter of the flag, repeatedly if necessary. When
you have your answer, hit the <Enter> key. For example, to choose Squadron, select the
dropdown list, hit S three times, then <Enter>.
The Stats button shows you which flags you have identified correctly and incorrectly.
Word Quiz shows you a random word and asks you to identify it. Type in the word and press
<Enter>. It will use substitute flags in the word if necessary. Sub flags are used because a set of
flags usually only includes one of each letter and number, so you need a way to repeat a character.
The 1st substitute flag tells you that you need to replace the sub flag with the first flag of the same
class (either letter or number) in the message. The 2nd sub means substitute the second flag, etc. So
for example, to spell the word sailing, you need 2 I flags, but you only have one, so you would
use the 3rd substitute to repeat the third letter in the message.
S
A
I
L
3rd Sub (I)
N
G
Flags.exe
Page 1
2/25/04
Show Words just spells out in code flags whatever you type. It will use substitutes when necessary.
If a letter or number is used more than twice, it will just use multiples of the same flag.
Flag Meanings is the last mode. It will quiz you on the meaning (from NIMA Pub 102) that each
flag has when hoisted by itself. The program will show you a flag; choose its meaning from the
drop down list and press <Enter>. You can bring up a list of meanings in addition to the flag help
that was available in the other modes. Also, rolling the mouse over the image of a flag in the Flag
Listing window will show its meaning.
Keep in mind that those meanings apply only when the flag is hoisted by itself; they dont add
up. J means on fire and carrying dangerous cargo and I means turning to port, but JI
together means are you aground? You need the International Code of Signals book to translate
them all.
John Daley
daleyjf@yahoo.com
Flags.exe
Page 2
2/25/04
ICS Letters
A -
B -
C -
D -
E -
F -
G -
H -
I -
J -
K -
L -
M -
N -
O -
Man overboard.
Flags.exe
Page 3
2/25/04
P -
Q -
R -
S -
T -
U -
V -
I require assistance.
W-
X -
Y -
I am dragging my anchor.
Z -
Substitutes
1st Sub
2nd Sub
3rd Sub
4th Sub
(4th sub isnt used in ICS; only by NATO)
Flags.exe
Page 4
2/25/04
NATO Signals
Corpen
Designation
Division
Emergency
Flotilla
Formation
Interrogative
Negative
Port
Preparative
Screen
Speed
Squadron
Starboard
Station
Subdivision
Turn
Flags.exe
Page 5
2/25/04