Professional Documents
Culture Documents
HD 247 Alarm Valve Model-H
HD 247 Alarm Valve Model-H
MODEL-H
TECHNICAL DATA
MODEL
END CONNECTION
Flange X Flange
Flange X Groove
Groove X Groove
NOMINAL SIZE
MAXIMUM SERVICE
PRESSURE
Vertical
FACTORY
HYDROSTATIC TEST
PRESSURE
35Kg./Sq.Cm. (500PSI)
FRICTIONAL LOSS
200 NB IN TERMS OF
150 NB EQUIVALENT LENGTH 100 NB OF PIPE ( C-120 )
80 NB -
LISTED
3S38
DESCRIPTION
Alarm Valve is a double seated clapper check valve
with grooved seat design, which ensures positive
water flow for alarm operation and is designed for
installation in wet pipe sprinkler system. External
bypass prevents false alarm under all supply pressure
condition. In the event of variable pressure condition,
false alarm is prevented with the provision of retard
chamber, thus the design allows for installation under
both variable and constant supply pressure condition.
7.50 Mtrs.
7 Mtrs.
6.1 Mtrs.
4.7 Mtrs.
FINISH
APPROVAL
ORDERING
INFORMATION
REFERENCE
OPERATION
* For 200 NB, FM approval is rated upto 200 PSI (14 Bar)
WEIGHT IN KG
Valve Size
Groove X Groove
200
65
54.0
150
42
35.8
44.0
28.0
100
27
22.1
17.30
80
18
15.0
12.10
Pipe OD in MM
3 (80 NB)
89
4 (100 NB)
114.3
6 (150 NB)
165.1
6 (150 NB)
168.3
8 (200 NB)
219.1
JUNE, 2014
PAGE 1 OF 16
HD 247
INSTALLATION
1. HD Sprinkler alarm valve, Model-H must be
installed vertically.
2. The alarm valve must be installed in a readily
visible and accessible location and provision to be
made in such a way that alarm line drain is visible
and accessible.
3. Where water pressure fluctuates, the variable
pressure trim with retard chamber must be used.
Under non-fluctuating water pressure condition,
the constant pressure trim, which does not
include retard chamber, may be used.
4. The valve must be installed with trim in accordance
with the trim data. Failure to follow the
appropriate trim connection guidelines may
prevent the device from functioning properly as
well as void listing, approval and the manufacturers
warranty.
5. Care must be exercised while installing the
check valve in the trim to ascertain that they are
located with the arrow mark on the check valve
body and pointed in proper direction.
6. The contraction and expansion associated with
an excessive volume of trapped air could cause
the waterway clapper to cycle open and shut. This
may result in false alarm or an intermittent alarm.
To avoid these, it is recommended to have breather
valve in the system piping network and a vent valve
at the extreme end of the system to bleed-off
the air.
7. The ball valve provided on the alarm line must
be kept open and strapped in set position.
8. Pipe connecting the retard chamber and
sprinkler alarm bell must be supported
properly to avoid loading on the retard chamber.
JUNE, 2014
FALSE ALARM
1. Inspect the valve rubber clapper face. If worn
or damaged, replace it. Be certain that dirt, stone
or any other foreign object have not accumulated
under the clapper face and lodged in the groove
or holes. Clean the clapper face thoroughly. If the
seat ring surface is nicked or scoured, it might be
possible to repair the same using lapping
compound. If not, replace the complete valve or
return it to the manufacturers works for repair.
2. If sprinkler alarm bell is not functioning or the
impeller is jammed, please follow the maintenance
guideline provided in the catalogue for sprinkler
alarm bell.
PAGE 2 OF 16
HD 247
CAUTION
1. The UL Listing,FM Approval and manufacturers
warranty are valid only when the alarm
valve is installed with HD trim set and installed
as per installation guidelines.
2. Pressure relief valve is required with wet pipe
system, when a rise in ambient temperature can
cause system pressure to exceed 17.5 Bar
(250 PSI). A 17.7 Bar relief valve setting should
be used.
3. For proper operation of the wet system and to
minimize unwanted false alarm, it is important to
remove trapped air from the system. The air
trapped in the system may also cause intermittent
operation of the Water Motor Alarm during
sustained flow of water.
JUNE, 2014
PAGE 3 OF 16
HD 247
100
200
300
500
700 1000
2000 3000
5000
0.2
2
0.1
1
0.07
0.05
0.7
0.04
0.5
0.4
0.03
0.3
0.02
0.2
0.01
0.1
200
300
500 700
1000
2000
3000
20000
JUNE, 2014
PAGE 4 OF 16
HD 247
FLANGE X GROOVE
1
1
7
3
11
3
6
GROOVE X GROOVE
9
5
9
12
FLANGE X FLANGE
13
11
10
PART LIST
ITEM
200
NB
150
NB
100
NB
DESCRIPTION
80
NB
200
NB
150
NB
100
NB
80
NB
MATERIAL
SPECIFICATION
NA
NA
NA
NA
DUCTILE IRON
2478
2471
2469
2468
DUCTILE IRON
2485
2482
2480
2479
NA
NA
NA
NA
2600
2600
2600
9102
9101
2636
2628
2635
7
8
DUCTILE IRON
SEAT
BRONZE
2600
CLAPPER BUSH
BRASS
9101
9101
STAINLESS STEEL
2619
2656
RUBBER CLAMP
STAINLESS STEEL
2606
2618
2655
RUBBER SEAT
NEOPRENE RUBBER
2634
2603
2617
2654
CLAPPER
DUCTILE IRON
2638
2608
2258
2658
HINGE PIN
STAINLESS STEEL
2599
2599
2599
2599
BODY BUSH
BRASS
10
9004
9004
9004
8373
STEEL
11
9430
9430
9430
9430
FORGED STEEL
12
2637
2611
2620
2657
COVER GASKET
NEOPRENE RUBBER
13
2631
2604
2615
2651
COVER
DUCTILE IRON
JUNE, 2014
PAGE 5 OF 16
HD 247
GROOVE X GROOVE
FLANGE X GROOVE
17
17
25
NO
14
16
18
15
16
15 NO
14
24
13
FLANGE X FLANGE
2
29
28
30
#
#
22
21
23
NC
12
1
19
2
2
2,29
10
11
28
28
NO
2
29
5
10
27
8
1,28
26
7
1,28
6
19
26
20
#
D
JUNE, 2014
PAGE 6 OF 16
HD 247
CODE
NO.
1
2
3
3
4
4
4
4
5
5
6
6
7
7
8
8
9
9
9
10
11
12
13
14
15
16
17
18
18
18
18
19
20
21
22
23
23
24
24
25
25
26
27
28
29
30
8625
8620
8617
8616
8951
9407
9406
9397
9406
9441
9397
9480
8628
8627
9421
9455
8663
9426
9893
9423
8633
8632
8631
9477
8698
8357
9526
2301
2302
2303
2304
8355
1027
9382
8629
1416
1417
8359
8360
9394
9392
9561
9441
8624
8619
-
JUNE, 2014
DESCRIPTION
HEX NIPPLE
TEE
ELBOW
ELBOW
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
UNION
UNION
SWING CHECK VALVE
SWING CHECK VALVE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
BALL VALVE
REDUCING HEX NIPPLE
REDUCING HEX NIPPLE
REDUCING HEX NIPPLE
BALL VALVE
HEX NIPPLE
ELBOW
PRESSURE GUAGE
ALARM TEST LINE ASSEMBLY
ALARM TEST LINE ASSEMBLY
ALARM TEST LINE ASSEMBLY
ALARM TEST LINE ASSEMBLY
REDUCING BUSH
RESTRICTION NOZZLE ASSEMBLY
Y TYPE STRAINER
PLUG
SPRINKLER ALARM
SPRINKLER ALARM
HEX NIPPLE
HEX NIPPLE
ANGLE VALVE
ANGLE VALVE
PIPE NIPPLE
PIPE NIPPLE
HEX NIPPLE
TEE
PRESSURE SWITCH (OPTIONAL)
SIZE
3/4
3/4
3/4
1/2
3/4 X 150 MM LONG
3/4 X 130 MM LONG
3/4 X 100 MM LONG
1/2 X 100 MM LONG
3/4 X 100 MM LONG
3/4 X 80 MM LONG
1/2 X 100 MM LONG
1/2 X 80 MM LONG
3/4
1/2
3/4
1/2
3/4 X 70MM LONG
3/4 X 60MM LONG
1/2 X 70MM LONG
1/2
3/4 X 1/2
3/4 X 1/4
1/2 X 1/4
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
3/4 X 1/2
HD MAKE
3/4
1/2
HD MAKE TYPE A
HD MAKE TYPE B
2
1-1/4
2
1-1/4
1/2 X 60MM LONG
3/4 X 80MM LONG
1/2
1/2
1/2 END CONNECTION
PAGE 7 OF 16
QUANTITY
PER ALARM VALVE SIZE
200NB 150NB 100NB 80NB
4
4
5
2
3
3
3
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
3
3
3
5
2
2
2
3
1
1
1
1
HD 247
GROOVE X GROOVE
FLANGE X GROOVE
17
17
25
30
NO
14
16
18
15
16
15 NO
14
24
13
FLANGE X FLANGE
22
21
23
19
2
29
28
27
12
NC
2,29
10
1
11
28
28
NO
31
32 #
2
29
5
10
D
D
1,28
26
7
1,28
6
19
26
#
20
#
D
JUNE, 2014
PAGE 8 OF 16
HD 247
CODE
NO.
1
2
3
3
4
4
4
4
5
5
6
6
7
7
8
8
9
9
9
10
11
12
13
14
15
16
17
18
18
18
18
19
20
21
22
23
23
24
24
25
25
26
27
28
29
30
31
32
8625
8620
8617
8616
8951
9407
9406
9397
9406
9441
9397
9480
8628
8627
9421
9455
8663
9426
9893
9423
8633
8632
8631
9477
8698
8357
9526
2301
2302
2303
2304
8355
1027
9382
8629
1416
1417
8359
8360
9394
9392
9561
9441
8624
8619
2300
8625
JUNE, 2014
DESCRIPTION
HEX NIPPLE
TEE
ELBOW
ELBOW
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
UNION
UNION
SWING CHECK VALVE
SWING CHECK VALVE
PIPE NIPPLE
PIPE NIPPLE
PIPE NIPPLE
BALL VALVE
REDUCING HEX NIPPLE
REDUCING HEX NIPPLE
REDUCING HEX NIPPLE
BALL VALVE
HEX NIPPLE
ELBOW
PRESSURE GUAGE
ALARM TEST LINE ASSEMBLY
ALARM TEST LINE ASSEMBLY
ALARM TEST LINE ASSEMBLY
ALARM TEST LINE ASSEMBLY
REDUCING BUSH
RESTRICTION NOZZLE ASSEMBLY
Y TYPE STRAINER
PLUG
SPRINKLER ALARM
SPRINKLER ALARM
HEX NIPPLE
HEX NIPPLE
ANGLE VALVE
ANGLE VALVE
PIPE NIPPLE
PIPE NIPPLE
HEX NIPPLE
TEE
PRESSURE SWITCH (OPTIONAL)
RETARD CHAMBER, MODEL - RC9
HEX NIPPLE
SIZE
3/4
3/4
3/4
1/2
3/4 X 150 MM LONG
3/4 X 130 MM LONG
3/4 X 100 MM LONG
1/2 X 100 MM LONG
3/4 X 100 MM LONG
3/4 X 80 MM LONG
1/2 X 100 MM LONG
1/2 X 80 MM LONG
3/4
1/2
3/4
1/2
3/4 X 70MM LONG
3/4 X 60MM LONG
1/2 X 70MM LONG
1/2
3/4 X 1/2
3/4 X 1/4
1/2 X 1/4
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
3/4 X 1/2
HD MAKE
3/4
1/2
HD MAKE TYPE A
HD MAKE TYPE B
2
1-1/4
2
1-1/4
1/2 X 60MM LONG
3/4 X 80MM LONG
1/2
1/2
1/2 END CONNECTION
HD MAKE
3/4
PAGE 9 OF 16
QUANTITY
PER ALARM VALVE SIZE
200NB 150NB 100NB 80NB
4
4
5
2
3
3
3
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
3
3
3
5
2
2
2
3
1
1
1
1
1
1
1
1
1
1
1
1
HD 247
SYSTEM
SUPPLY
PRESSURE PRESSURE
PG
PG
(TO SYSTEM)
PS
*G
AT
~
TO DRAIN
AC
TO DRAIN
UPSTREAM.
(FROM SUPPLY)
SYSTEM
PRESSURE
(TO SYSTEM)
SUPPLY
PRESSURE
PG
PG
PS
*
*G
AT
RC
~
TO DRAIN
AC
TO DRAIN
UPSTREAM.
(FROM SUPPLY)
AV
ALARM VALVE
OPTIONAL
SPRINKLER ALARM
NO
NORMALLY OPEN
PS
PRESSURE SWITCH
OD
OPEN DRAIN
RC
RETARD CHAMBER
AT
NC
NORMALLY CLOSED
PG
PRESSURE GUAGE
AC
---
NOTE :1) SPRINKLER ALARM CONTROL VALVE MUST BE KEPT NORMALLY OPEN IF THIS VALVE IS KEPT CLOSED
THE SPRINKLER ALARM BELL/ ELECTRIC ALARM WILL NOT SIGNAL.
2) SPRINKLER ALARM TEST VALVE MUST BE KEPT NORMALLY CLOSED CONDITION. VALVE IS OPENED TO
TEST THE SPRINKLER ALARM BELL / ELECTRIC ALARM.
JUNE, 2014
PAGE 10 OF 16
HD 247
SYSTEM
SUPPLY
PRESSURE PRESSURE
PG
PG
(TO SYSTEM)
PS
*
*G
AT
~
TO DRAIN
AC
TO DRAIN
UPSTREAM.
(FROM SUPPLY)
SYSTEM
PRESSURE
SUPPLY
PRESSURE
PG
PG
PS
*
*G
AT
RC
~
TO DRAIN
AC
TO DRAIN
ABBREVIATION & SYMBOLS
NON RETURN VALVE
VALVE
ANGLE VALVE
STRAINER
AV
ALARM VALVE
OPTIONAL
SPRINKLER ALARM
NO
NORMALLY OPEN
PS
PRESSURE SWITCH
OD
OPEN DRAIN
RC
RETARD CHAMBER
AT
NC
NORMALLY CLOSED
PG
PRESSURE GUAGE
AC
---
NOTE :1) SPRINKLER ALARM CONTROL VALVE MUST BE KEPT NORMALLY OPEN IF THIS VALVE IS KEPT CLOSED
THE SPRINKLER ALARM BELL/ ELECTRIC ALARM WILL NOT SIGNAL.
2) SPRINKLER ALARM TEST VALVE MUST BE KEPT NORMALLY CLOSED CONDITION. VALVE IS OPENED TO
TEST THE SPRINKLER ALARM BELL / ELECTRIC ALARM.
JUNE, 2014
PAGE 11 OF 16
HD 247
SYSTEM
SUPPLY
PRESSURE PRESSURE
PG
PG
(TO SYSTEM)
PS
*G
AT
~
TO DRAIN
AC
TO DRAIN
UPSTREAM.
(FROM SUPPLY)
SYSTEM
PRESSURE
(TO SYSTEM)
SUPPLY
PRESSURE
PG
PG
PS
*
*G
AT
RC
~
TO DRAIN
AC
TO DRAIN
UPSTREAM.
(FROM SUPPLY)
AV
ALARM VALVE
OPTIONAL
SPRINKLER ALARM
NO
NORMALLY OPEN
PS
PRESSURE SWITCH
OD
OPEN DRAIN
RC
RETARD CHAMBER
AT
NC
NORMALLY CLOSED
PG
PRESSURE GUAGE
AC
---
NOTE :1) SPRINKLER ALARM CONTROL VALVE MUST BE KEPT NORMALLY OPEN IF THIS VALVE IS KEPT CLOSED
THE SPRINKLER ALARM BELL/ ELECTRIC ALARM WILL NOT SIGNAL.
2) SPRINKLER ALARM TEST VALVE MUST BE KEPT NORMALLY CLOSED CONDITION. VALVE IS OPENED TO
TEST THE SPRINKLER ALARM BELL / ELECTRIC ALARM.
JUNE, 2014
PAGE 12 OF 16
HD 247
80NB
100NB
150NB
200NB
279
312
331
350
457
464
486
527
434
434
434
443
127
140
173
192
201
219
234
269
262
274
315
378
80NB
100NB
150NB
200NB
279
312
331
350
482
488
510
551
588
588
588
597
127
140
173
192
201
219
234
269
262
274
315
378
JUNE, 2014
PAGE 13 OF 16
HD 247
80NB
100NB
150NB
200NB
279
312
331
350
457
464
486
527
434
434
434
443
127
140
173
204
201
219
234
269
275
291.3
316.8
395.2
80NB
100NB
150NB
200NB
279
312
331
350
482
488
510
551
588
588
588
597
127
140
173
204
201
219
234
269
275
291.3
316.8
395.2
JUNE, 2014
PAGE 14 OF 16
HD 247
80NB
100NB
150NB
200NB
279
312
331
350
457
464
486
527
439
443
442
443
127
140
173
204
201
219
234
269
280
300
324
405
80NB
100NB
150NB
200NB
279
312
331
350
482
488
510
551
593
596
596
607
127
140
173
204
201
219
234
269
280
300
324
405
JUNE, 2014
PAGE 15 OF 16
HD 247
LIMITED WARRANTY
HD FIRE PROTECT PVT. LTD. hereby referred to as HD FIRE warrants to the original purchaser of the fire protection products manufactured by HD FIRE and to any other person
to whom such equipment is transferred, that such products will be free from defect in material and workmanship under normal use and care, for two (2) years from the date of
shipment by HD FIRE. Products or Components supplied or used by HD FIRE, but manufactured by others, are warranted only to the extent of the manufacturers warranty.
No warranty is given for product or components which have been subject to misuse, improper installation, corrosion, unauthorized repair, alteration or un-maintained.
HD FIRE shall not be responsible for system design errors or improper installation or inaccurate or incomplete information supplied by buyer or buyers representatives.
HD FIRE will repair or replace defective material free of charge, which is returned to our factory, transportation charge prepaid, provided after our inspection the material is
found to have been defective at the time of initial shipment from our works. HD FIRE shall not be liable for any incidental or consequential loss, damage or expense arising directly
or indirectly from the use of the product including damages for injury to person, damages to property and penalties resulting from any products and components manufactured
by HD FIRE. HD FIRE shall not be liable for any damages or labour charges or expense in making repair or adjustment to the product. HD FIRE shall not be liable for any
damages or charges sustained in the adaptation or use of its engineering data & services. In no event shall HD Fires product liability exceed an amount equal to the sale price.
The foregoing warranty is exclusive and in lieu of all other warranties and representation whether expressed, implied, oral or written, including but not limited
to, any implied warranties or merchantability or fitness for a particular purpose. All such other warranties and representations are hereby cancelled.
NOTICE :
The equipment presented in this bulletin is to be installed in accordance with the latest publication standards of NFPA or other similar organisations and also with
the provision of government codes or ordinances wherever applicable.
The information provided by us are to the best of our knowledge and belief, and are general guidelines only. Site handling and installation control is beyond our reach.
Hence we give no guarantee for result and take no liability for damages, loss or penalties whatsoever, resulting from our suggestion, information, recommendation or
damages due to our product.
Product development is a continuous programme of HD FIRE PROTECT PVT. LTD. and hence the right to modify any specification without prior notice is reserved with
the company.
JUNE, 2014
C-3/6, THE NANDANVAN IND. ESTATE, L.B.S. MARG, THANE 400 604., INDIA.
PHONES : + (91) 22 2583 5434 2582 6958 2582 6793
FAX : +(91) 22 2581 2524 6796 9049
EMAIL : info@hdfire.com WEBSITE : www.hdfire.com
PAGE 16 OF 16
HD 247