Building and Structural Design Codes

TH42086
Building and Stmctural

Design Codes
An international survey
Business
Information
0 British Standards Institution 2000
Except as permitted by Copyright Law no extract may be repro

transmitted in any form or by any means prior permission in writing from BSI. If permission is
a licensing agreement. Details and advice
Chiswick High Road, London W4 4AL.
stored in a retrieval system or

royalty payments or
Whilst every effort is made to ensure the accuracy of information, no responsibility, legal or otherwise is
accepted for any errors, omissions or inaccuracy.
Compliance with a British Standard does not of itself confer immunity from legal obligations.
ISBN 0 580 36642 1
BSI International Survey
Structural Design Codes
CONTENTS
Page
1
1. Preface
2. Introduction
3. Europe
4. List of European Building Research Institutions
5. Current Eurocodes
6. Country Datasheets
Europe
AUSTRIA
BELGIUM
DENMARK
FINLAND
FRANCE
GERMANY
GREECE
ICELAND
3
5
7
10
ITALY
IRELAND
NETHERLANDS
NORWAY
PORTUGAL
SPAIN
SWEDEN
SWITZER~AND
UNITED fiINGDOM
Rest of World
ARGENTINA
ARMENIA
AUSTRALIA
AZERBAIJAN
BAHAMAS
BELARUS
BERMUDA
BOSNIA-HERZEGOVIN A
BRAZIL
BULGARIA
CANADA
CANADA- ALBERTA
CANADA-NEW BRUNSWICK
CROATIA
CHINA
CYPRUS
CZECH REPUBLIC
ESTONIA
EGYPT
FIJI
GEORGIA
HONG KONG
HUNGARY
INDIA
INDONESIA
Appendix 1
0 BSI 2002
ISRAEL
IVORY COAST
JAPAN
KY RGY ZTAN
LATVIA
LITHUANIA
MALTA
MOLDOVA
NEPAL
NEW ZEALAND
POLAND
PHILIPPINES
ROMANIA
RUSSIA
SINGAPORE
SLOVAKIA
SLOVENIA
SOUTH AFRICA
TURKMENISTAN
TURKEY '
UKRAINE
UNITED STATES
URUGUAY
UZBEKISTAN
VANUATU
VIETNAM
List of Worldwide Standards Organihations
July 2002
PREFACE
This is the first Edition of Building and Structural De#ign Codes - An International Survey. It
has been prepared with the help of Standards Bodies, Building Associations, and Government
Ministries around the world.
Building and Design has, traditionally, been a locally controlled and influenced matter. Local
resources and conditions, and the limits these imposkl, have been the primary influence on
structural design codes.
The opening of International markets and the strides bade in innovative designs, have made
Governments increasingly aware of the need to both hake regulations easily available and to
consider relaxing them in order to ease International *ade. It is an area of change as new less
prescriptive codes come in to existence and agreemends between nations are forged.
The publication will be updated quarterly to keep ab east of these changes. Countries not so
far included will be added, as the information be omes available. Developments within
Europe will also be monitored and the information k@t up to date.
The Updates are free for the first year after purchase,of the book. Subsequently they will be
made available to subscribers for an additional fee.
Included for further information is a list of International Standards bodies, and where
available Construction Product Approval bodies.
Any comments and suggestions regarding the survey are always welcome and should be
addressed to
Technical Information Group
BSI Standards
389 Chiswick High Road
London
w 4 4AL
Tel: +44 (0)20 8996 7903
Fax: +44 (0)20 8996 7048
0 BSI 2001
Sep-00
INTRODUCTION
Purpose
This publication aims to provide easy
reference to
International Building
regulations for Structural Designers and
Architects. It is a direct result of enquiries
received from industry regarding the
regulations, legislation, and design
requirements to be met overseas.
Scope
This survey covers National Building

Regulations and design Standards. The
Regulatory body is cited and where
applicable any acceptable Foreign
Standards are also included. It is divided
in to the European Economic Area and the
Rest of the World so that any mutual
agreements may be highlighted.
Sources of Information
Most countries
have
been sent
questionnaires to
their
respective
government
departments
and
the
information received from them has been
used in compiling this document, their
assistance is much appreciated. The
National Standards Bodies have been
instrumental in providing information or
alternatively providing the relevant
approval authority and their help is also
acknowledged.
In the case of those countries were we

have not been able to obtain information,
we have either provided the reason for this
in the notes section, or have not included
them in this edition. Future editions will
have additional countries included as the
information is gathered.
Acceptance of Foreign
Codes and Standards
Design
Many Building Codes include mandatory

Structural Design Standards. Although
0 BSI 2001
there is a current trend towards relaxing

thig status, and many countries, including
the/ UK, are beginning to discuss the
be efits of Performance based Codes to
all w for more innovative designs, this is
still)the exception not the rule.
Availability of Documents
Unless otherwise stated, documents listed
are in the language of the country of
ori$in.
En lish translations of all major foreign
CO es are available through BSI Technical
Inf rmation Group Translations section.
BS are also agents for the U.S.A Codes.
Bdl Technical Information Group

The Technical Information Group runs the
Re$earch Centre within BSI. They provide
research services to businesses and other
org nizations seeking to overcome
Te hnical Barriers to Trade in the UK,
Eurrope, or International arena.
Fod more information contact TIG on
tel:,+44 (0)20 8996 7111
fax: +44 (0)20 8996 7048
r
P
Qu tations
ob1 gation.
are
available
Otber construction
avhilable from TIG.
without
publications
CEIMarking and the Construction Products

Directive (ref TH 42097)
Glqss in Buildings, windows, doors and
furriiture (ref TH 42119)
Flammability Testing of Building Materials
- Am International Survev (ref TH 42126)
Flabmability testing of hdures and fittings
in buildings - An International survey (TH
42127)
Fire protection and suppression in
buivings - An international survey (TH
421/28)
Feb-Ol
EUROPE
Construction Products Directive
Eukocodes
Council Directive 89/106/EEC of 21

December 1988 on the approximation of
laws, regulations and administrative
provisions of the Member States relating
to construction products.
Th6 series of Eurocodes provide

deftnitions of building performance. They
coder all aspects of the Design of
st ctures and contain formulae and data
whch can be used to calculate the key
di ,ensions and other design variables for
a n i proposed construction.
Council Directive 93/68/EEC of 22 July

1993 amending Directive 89/1O6/EEC
(construction products)
The CPD is an attempt by Europe to
ensure the Safety of constructions in all
countries of the European Economic Area.
It lays down six essential performance
requirements:
1.
2.
3.
4.
5.
6.
Mechanical resistance and stability

Safety in the case of fire
Hygiene, health and the environment
Safety in use
Protection against noise
Energy economy and heat retention
The Directive permits two methods of

compliance
a) Manufacture in compliance with
Harmonized European Standards
(relevant national standards or
Euronorms)
b) European Technical Approval.
Th Eurocodes are made available in

ea h member country of CEN, which
includes the EC and E R A member
CO ntries, by each countrys national
sta dards body in the appropriate
lan uage. Each member country has also
pro uced a National Application Document
(N D) in the codes most appropriate to
the giving definitive figures for nationally
reg lated safety values, a schedule of
sudporting national reference standards
and providing guidance on application.
(Sde Table 2 for quick reference to which
ntries have published NADs to which
t:
Stil( in draft form, adoption of the codes as

part of National regulations is not
coTpulsory, but countries are required to
recbgnize structures built to the codes as
hading been adequately designed.
See Table 1 for list of published Eurocode
doduments
At the time of going to press no

Harmonized standards have
been
published.
European Technical Approval is performed
by Notified bodies in the member states. In
the UK this is the British Board of
Agrement. Currently this is the only
straightforward method of complying with
the requirements of the Directive.
is included in the
T h i following countries have also adopted
Eurpcodes:
Czech Republic, Hungary,
Slovakia.
CEi Marking
Within the EU, products which are CE

maked thus demonstrate compliance with
0 BSI 2001
Feb-Ol
countries in the EEA e.g. the UK. However

in most countries it is required. Also as the
CPD allows individual Member States to
require different levels and classes of
performance for products, manufacturers
will also need to ensure that their product
meets the specific national regulatory
requirements of the country concerned.
Other Relevant European Directives

98/37/EC directive of the European
Parliament and of the Council of 22 June
1998 on the approximation of the laws of the
Member States relating to machinery
89/686/EEC Council Directive of 21
December 1989 on the Approximation of the
laws of Member States relating to personal
protective equipment
February 1973 on the harmonization of the
laws of the Member States relating to
electrical equipment designed for the use
within certain voltage limits
December 1988 on the approximation of
laws, regulations and administrative
provisions of the Member States relating to
electromagnetic compatibility.
0 BSI 2001
Feb-Ol
EUROPEAN NETWORK OF BUILDING RESEARCH INSTITUTES

Belgium
WCB-CSTC-BBRI Belgian Building Research Institute
Violetstraat 21-23,
6-1000 Brussel
Belgium
Tel: +32 2 502 66 90 Fax: +32 2 502 81 80
Web: http:lv.ww.bbri.be
Denmark
SBI Danish Building Research Institute
Dr. Neergaards Vej 15, Postbox 119
DK-2970 Horsholm,
Denmark
Tel: +45 42 86 55 33 Fax: +45 42 86 75 35
Web: http:/hnrww.sbi.dklEnglish/English.htrn
Eire
FORBAIRT Construction Industry Division
Glasnevin,
IR-Dublin 9
Ireland
Tel: +353 18 37 01 01 Fax: +353 18 36 81 39
Web: http:/www.forbairt.ie/
Finland
VTT Building Technology
Kernistintie 3, Espoo, PO Box 1800
FIN 02044 VTT,
Finland
Fax: +358 0 456 70 03

Tel: +358 0 45 61
Web: http:llwww.vtt.f~rte/bldtech.html
France
CSTB Centre Scientiique et Technique du Batiment
4 avenue Recteur Poincare, F-75782
PARIS Cedex 16,
France
Tel: +33 1 40 50 28 28 Fax: +33 1 45 25 61 51
Web: http:lwww.cstb.frl
0BSI 2001
sepoo
Germany
BAM BundesansA fur Materialforschungund -PrGfung
Unter den Eichen 87,
D-12205 Belrin 45
Germany
Tel: +49 30 81 04 12 00 Fax: +49 30 81 21 087
Web: http://trappist.kb.bam-berlin.de/bam.html
Iceland
IBRl Icelandic Building Research Institute
Rb-Keldnaholti,
IS-112 Reykjavik
Iceland
Fax: +354 567 8811
Tel: +354 567 6000
Web: http://wwv.randburg.com/is/icebuild.html
Italy
KITE lnstituto Centrale per I'lndustrialiuazione e 18 Technologia Edilizia
Via Lombardia 49,
Frazione Sesta Ulteriano,
20089 San Guiliano Milanese (MI)
I-Milano
Italy
Fax: +39 2 98 28 00 88
Tel: +39 2 98 061
Web: http://dns/unife.it/inter-lab/icite.htm
Netherlands
TNO Building and Construction Research
Lange Kleiweg 5, Rijswijk, PO Box 49
NL-2600 AA Delft,
The Netherlands
Tel: +31 15 84 20 00 Fax: +31 15 84 39 90
Web: http:/www.tno.nl/bouw/home.html
Noway
NBI Nowegian Building Research Institute
Porskningsveien3b,
PO Box 123 Blindern
N-0314 Oslo
Noway
Tel: +47 22 96 55 00 Fax: +47 22 69 94 38
Web: http:/Ewww.byggforsk.no/english.htm
0 BSI 2001
Sep-00
Portugal
LNEC Laboratorio Nacional de Engenharia Civil
Ministerio da Habitacao e Obras Publicas
Portugal
Tel: +351 184821 31 Fax: +351 18497660
Web: http:huww.lnec.pt
Spain
ICCET-CSIC lnstiuto de Ciencias de la Construcc/onEduardo Torroja, Consejo Superior de
lnvestigacionesCientificas
Serrano Glavache s/n Apartado de Correos 19.002
E-28033 Madrid
Spain
I
Tel: +34 1 302 04 0 4 F a : +34 1 302 07 00

Web: http:lhuww.csic.es
Sweden
SP Swedish National Testing and Research Institute
Box 857
S-05115 Boras
Sweden
Tel: +46 33 16 50 00 Fax: +46 33 13 55 02
Web: http:/huww spse
United Kingdom
BRE Building Research Establishment
UK Garston,
Watford WD2 7JR
United Kingdom
Tel: +44 923 89 40 40
Web: http:/wvvw.bre.co.uk/
0 BSI 2001
Fax: +44 923 66 40 10
Sep-00
CURRENT EUROiCODES
TABLE 1
i
EUROCODE 1
BASIS OF DESIGN ANa ACTIONS ON STRUCTURES
e
,
ENV 1991-4
ENV 1991-5
Actions on silos and tank$

Actions induced by craneb and machinery
ENV 1992-5
ENV 1992-6
Marine and maritime struhtures

Massive structures
EUROCODE 3
DESIGN OF STEEL STqCTURES
ENV 1993-1-1
ENV 1993-1-2
ENV 1993-1-3
ENV 1993-1-4
ENV 1993-2
ENV 1993-3-1
ENV 1993-3-2
ENV 1993-4
ENV 1993-5
ENV 1993-6
ENV 1993-7
ENV 1993-8
General rules and rules fqr building

Structural fire design
Cold formed thin gauge dembers and sheeting
The use of stainless steelk
Bridges and plated Structures
Towers, masts
Chimneys
Tanks, silos and pipelined
Piling
Crane structures
Marine and maritime struwures
Agricultural structures
1

-$\'
EUROCODE 4
ENV 1994-1-1
ENV 1994-1-2
ENV 1994-2
EUROCODE 5
DESIGN OF COMPOSITk STEEL & CONCRETE

STRUCTURE S
General rules and rules fhr building
Bridges
DESIGN OF TIMBER ST~UCTURES

1
General rules and rules fhr building

Bridges
ENV 1995-1-1
-ENV 1995-1-2
ENV 1995-2
EUROCODE 6
DESIGN OF MASONRY PTRUCTURES
ENV 1996-1-1
ENV 1996-1-2
ENV 1996-1-3
ENV 1996-1-4
ENV 1996-2
ENV 1996-3
ENV 1996-4
Rules for reinforced and Vnreinforced masonry

Detailed rules for lateral Ibading
Complex shape sections j
Special design aspects I
Simplified and simple rulds
Short life structures
EUROCODE 7
GEOTECHNICAL D E S I ~ N
I ENV 1998-2
~~
ENV 1998-3
ENV 1998-4
ENV 1998-5
I EUROCODE 9
ENV 1999-1-1
ENV 1999-1-2
ENV 1999-2
0 BSI 2001
I Bridges
Towers, masts and chimdeys
Silos, tanks and pipelines!
I Foundations, retaining st+ctures and geotechnical aspects
I DESIGN OF ALUMINIU~STRUCTURES
I
I General rules and rules fdr building

Rules for structures susc$ptible to fatigue
Sep-00
Qn
EUROCODES IN USE IN EC M ~ M B E RSTATES
TABLE 2
8b
Q)
v)
0
0
EUROPE
AUSTRIA
National Regulations
Each of the 9 Federal Regions:Burgenland, Kartnen [ Carinthia ], Niederijsterreich [ Lower Austria ], Oberiisterreich[ Upper Austria ],
Salzburg [ Salzburg l1 Steierrnark [ Styria IITiro1 [ Tyrol ]v, Voralhberg [ Vorarlberg] Wien [Vienna ]
have their own building code.
2000/572/A Guidelines and regulations for highway construction 5.41 (RVS %.41 and RVS 5.42)
2000/567/A Construction Road construction on bridges
Standards
Foundations
OENORM B 4400: 1978
OENORM B 4422-1: 1992
Geotechnical engineering (founqation engineering) - soil classification for civil

engineering purposes and meth s for identification of soil-groups
Geotechnical engineering (foun ation engineering) exploration by test pits and
borings, sampling; recording
Earthwork and foundation enginbering analysis of soil specimen; grain size
distribution
Geotechnical engineering (foundation engineering); soil investigation; plate loading
test
Geotechnical engineering (founqation engineering); analysis of soil specimens;
proctor test
engineering) - Analysis of soil specimen Geotechnical engineering (foun
OENORM B 4433: 1987
Geotechnical
OENORM B 4401-3: 1985

OENORM B 4412: 1974
OENORM B 4417: 1979
OENORM B 4418: 1981
Steel structures
OENORM B 4300 Teil 1:
1994
OENORM B 4300 Teil2:
1994
1994
1994
1994
1978
1979
1978'
1975
OENORM B 4601: 1969
OENORM B 4602: 1975
8"
of base and slope failure
Steel structures - Design and cohstruction Limit states
Steel structures - Workmanship
Steel structures Buckling of ba and skeletal structures Provisions for the joint
application of DIN 18800 Part 2 nd OENORM B 4300-1
Steel structures Buckling of!plE es Provisions for the joint application of DIN 18800
Part 3 and OENORM B 4300-1
Steel structures Fatigue strength
Steel structures; design and caldUlatiOn

Steel structures; calculation of fatigue strength
Steel structures; calculation of swbility, basic cases
Steel structures; specifications for erection and workmanship
Steel construction. supporting
Steel constructions Road
for buildings. Design and construction
Aluminium structures
none
Concrete structures
OENORM B 4200 Teil2 :
1983
1986
1984
1997
1988
0 BSI 2001
Concrete structures; execution principles

Plain concrete structures; design and construction
Reinforced concrete structures; basic rules for design
Precast concrete elements and precast structures for static loadings
Concrete buildings; repair works, reconstruction and strengthening
AUG-01

1987
1996
1996
OENORM B 4200 Teil 10 :
1996
OENORM B 4200 Teil 11:
1991
OENORM B 4700: 1997
Concrete reinforcement
Reinforced concrete structures - Design and detailing (11)
Reinforced concrete structures Design and detailing (I)
Concrete Production, applicability and verification of quality
Lightweight concrete Productiqn and quality control
Reinforced concrete structures EUROCODEsrientatedanalysis, design and

detailing (includes also comgendlum 1997)
Masonry structures
none
Timber structures
OENORM B 4100-2: 1997
OENORM B 4101
OENORM B 4102
OENORM B 4002
Timber structures
Timber stmctures
Timber structures
Highway Bridges
Composlte structures
OENORM B 4502
Composite structures of steel arid concrete; road bridges; design and construction
- Design and qonstruction

- Load bearin structures for rising and similar buildings
- Timber brid$s
- General ruleg for construction
Acceptable Foreign Standards

See Eurocodes
Regulatory Body
Bundesministerium fijr Wirtschaft und ArbeitLandstr. Hauptstr. 55-57
1031 Wien
b t ' rreichisches lnstitut fiir Bautechnik

Sch&kenstraBe 4
A-1010 Wien
tel: +43 1 71102 260

fax: +43 1 714 35 82/71102 399
Tel: +43 1 533 65 50

Fax: +43 1 533 64 23
e-mail: Mail@oib.or.at
Deals with approval of products
EUROCODES Austria
EUROCODE 1
ENV 1991-24
ENV 1991-2-7
ENV 1991-3
ENV 1991-5
ENV 1991: Basls of design and acafons on structures

National Forward published
ENV 1992-1-1
ENV 1992-1-2
ENV 1921-1-3
ENV 1992-14
ENV 1992-1-5
ENV 1992-1-6
ENV 1992-3
ENV 19924
ENV 1992: Deslgn of concrete strdctures

EUROCODE 3
Design of steel structures
ENV 1993-1-1
ENV 1993-1-2
ENV 1993-2

EUROCODE4
ENV 1994-1-2
Design of composite steel and coicrete structures

National Application document published
EUROCODE
5
ENV 19951-1
ENV 19951-2
Design of timber structures

EUROCODE 6
Design of masonry structures

EUROCODE2
ENV 1996-1-1
ENV 1996-1-2
ENV 1996-1-3
ENV 1996-3
EUROCODE 7
ENV 1997-1
ENV 1997-2
ENV 1997-3
National Application dowment published

Geo-technical design
ENV 1998-1-1
ENV 1998-1-2
ENV i ~ ~ a i - 3
ENV 19982
ENV 19984
Design provisions for earthquakes and geotechnlcal aspects

EUROCODE
9
ENV 1999-1-1
ENV 1999-2
Design of aluminium structures

EUROCODE 8
0 BSI 2001
AUG-01
BELGIUM
Law of 20 February 1939 outlines 10 year responsibilityof Architect and Fontractor.
Royal Ordnance of 19 December 1997 regarding the prevention of fires 6nd explosions
Royal Ordnance of 19 August 1998 regarding construction products, imdlementing EC Directive 89/106/EEC
Flemish thermal and ventilation regulation of 29 April 1991
Walloon thermal and ventilation regulationof 30 April 1998
Brussels thermal and ventilation regulation of 3 June 1999
Standards
Structural Design
NBN 803 001: 1988

NBN B 03 101 : 1993
NBN B 03 104 : 1993
NBN 803 105 : 1994
NBN 803-101 : 1993
NBN I S 0 3010 : 1993
NBN ISOITR 9492
NBN I S 0 3898 : 1992
Loading
NBN 803 002-1: 1988
NBN B 03-002-2 1988

NBN B 03-102: 1976
NBN B 03-103 : 1976
NBN IS0 4355 : 1993
General principles on the determinatikn of the safety and serviceability of structures

Actions on structures. Road bridgesj
Actions on structures Railway bridges
Actions on structures Trams
Road Bridges
Bases for design of structures; seismic actions on structures
Thermal Actions
Current Eurocodes preferred
'
Bases for design of structures; Notakns; General symbols
Wind loads on structures. General. b i n d pressure on walls and the overall effects of wind on
I
structures
Action of wind on buildings: dynamic /effects of wind on flexible structures
Forces on structures. Direct effects f permanent loads due to dead weight
Forces on structures. Direct forces. borking loads on buildings
Work in hand. 1993 Draft ]
Bases for design of structures; Determination of snow loads on roofs
Current Eurocode preferred
Earthquake Resistance
Current Eurocodes preferred
Steel structures
NBN B 51-001 H : 1977
NBN B 51-002 H 1988
NBN 852-001 : 1995
Concrete structures
NBN 815-002 : 1999
Steel constructions, elastic calculatio' method

Steel constructions, limit state calcul&on method
Steel bridges
Concrete General
Current Eurocodes preferred for c+ncrete structures
Masonry structures
NBN 824-301 (STS 22) : 1980
NBN 824-401 (STS 22-3): 1981
Timber structures
STS 04 I STS 31

Executionof masonry

(not Standards but documents produged by MVllMCl Ministere des Communications et de
I'lnfrastructure)
I
Current Eurocodes preferred for ti ber structures
1"

Belgian Constructionstandards are not mandatory but are considered (tagether with eg Technical Notes from BBRI) as evidence of
Good Practice. See also Eurocodes
Regulatory Body
Ministere des communications et de I'infrastructure,
rue de la Loi 155.
1040 Bruxelles,
t6I 02-287.31.53,
fax 02-287.31.51.
tel: +32 2 665 77 11

fax: +32 2 a53 07 29
Notes
BENOR Certification mark for Traditional products

ATG lnnovativelnew products
0 BSI 2002
July-2002
E UROCODES - Belgium
EUROCODE
I
ENV 1991-1
ENV 1991-2-1
ENV 1991-2-2
ENV 1991-2-3
ENV 1991-24
ENV 1991-2-5
ENV 1991-2-6
ENV 1991-2-7
ENV 1991-3
ENV 1991-4
ENV 1991-5
Basis of Design and actlons on s

National Forward published 1995
EUROCODE2
ENV 1992-1-2
ENV 1992-1-4
ENV 1992-2
ENV 1992-3
ENV 1992-4
Design of concrete structures

EUROCODE
3
ENV 1993-1-1
ENV 1993-1-1/Al
ENV 1993-1-1lA2
ENV 1993-1-2
ENV 1993-1-3
ENV 1993-14
ENV 1993-1-5
ENV 1993-1-6
ENV 1993-1-7
ENV 1993-2
ENV 1993-3-1
ENV 1993-3-2
ENV 1993-4-1
ENV 1993-4-2
ENV 1993-4-3
ENV 1993-5

EUROCODE
4
ENV 1994-1-1
ENV 1994-1-2
ENV 1994-2
Design of composite steel and codcrete structures

National Application Document published 2001
EUROCODE
5
ENV 1995-1-1
ENV 1995-1-2
ENV 19952
Deslgn of Tlmber structures

EUROCODE
6
ENV 1996-1-1
ENV 1996-1-2
ENV 1996-1-3
ENV 1996-2
ENV 1996-3
Design of Masonry structures

EUROCODE
7
ENV 1997-1
ENV 1997-2
ENV 1997-3
EUROCODE
8
ENV 1998-1-1
ENV 1998-1-2
ENV 1998-1-3
ENV 1998-1-4
ENV 1998-3
ENV 1998-4
ENV 1998-5
Design provisions for earthquakesiand geo-technlcal aspects

EUROCODE 9
ENV 1999-1-1
ENV 1999-1-2
ENV 1999-2
Design of alumlnlum structures

0 BSI 2002
ctures
National Application Document published


National ADDlication Document Dublished 2000
July-2002
DENMARK
Building Regulations BR 95
Standards
DS 409 1998
DS 410: 1998
Code of practice for the safety of stru

Code of practice loads for the design
for the design and construction
These two standards form the

of structures.
Foundatlons
DS 415: 1999
Steel structures
DS 412 : 1998
Code of Practice for foundation Engin ering

This code together with DS 409 and {S 410 forms the basis for the design and construction of
foundation and earthworks.
Code of practice for the structural use of steel
With DS 409 and DS 410 forms the bisis for steel structures.
Concrete Structures
DS 420: 1983
DS 420E: 1985
DS 420rn1.1: 1993
DS 4201~112:
1997
DS 4201Til3: 1998
DS 481: 1999
DS 482: 1999
Concrete materials
Execution of concrete structures
Masonry structures
DS 414: 1998
Code of practice for the structural uselof masonry

with DS 409 and DS 410 forms the bdsis for masonry structures
Timber Structures
DS 413: 1998
DS 483: 1999'
Code of practice for the structural use;oftimber

With DS 409 and DS 410 forms the basis for timber structures
Visual strength grading of timber
Composite structures
DS 451: 1984
DS 451E: 1988
Code of practice for the design and canstruction of composite structures

Covers steel and concrete
Offshore structures
DS 449: 1983
DS 449 E: 1984
DS 449-2: 1983
DS 449-2 E: 1984
Code of practice for the design and

With DS 409, DS 410. DS 412, and D
supported offshore steel structures in
safety, protection against corrosion,
Code of practice for pilesupported o
Supplementary guide.
struction of pile supported offshore structures

415 forms the basis for design and construction of pile
e Danish sector of the North Sea.Loads, materials,
nsportation, installation, and inspection.
hore steel structures Part 2: Annex A-F

See Eurocodes
Regulatory Body
Danish Ministry of Housing and Building
Slotsholmsgade 1
1216 Copenhagen K
Tei: +45 33 92 61 00
Fax: +45 33 92 61 04
www.bm.dk
0 BSI 2000
Sep-00
EUROCODES - Denmark
EUROCODE
1
Basis of Design and actions on

structures
ENV 1991-2-2: .i997

ENV 1991-2-3: 1995
ENV 1991-2-4: 1995
ENV 1991-2-5: 1997
ENV 1991-2-6: 1997
ENV 1991-2-7: 1998
ENV 1991-3: 1995
ENV 1991-4: 1995

EUROCODE 2
ENV 1992-1-1: 1993

ENV 1992-1-2: 1995
ENV 1992-1-3: 1996
ENV 1992-1-4: 1994
ENV 1992-1-5: 1994
ENV 1992-1-6: 1334
ENV 1992-2: 1996
ENV 1992-3: 1999
ENV 1992-4: 1999

EUROCODE
3
ENV 1993-1-1: 1993

ENV 1993-1-2: 1995
ENV 1993-1-3. 1996
ENV 1993-1-4: 1996
ENV 1993-1-5: 1998
ENV 1993-2: 1998
ENV 1993-3-1: 1999
ENV 1993-3-2: 1998
ENV 1993-5: 1999

EUROCODE
4
ENV 1994-1-1: 1994

ENV 1994-1-2: 1994
ENV 1994-2: 1999
Design of composite steel and concrete structures

National Application document
+ Amendment AC1: 1995
EUROCODE
5
ENV 1995-1-1: 1994

ENV 1995-1-2: 1997
ENV 1995-2: !997

EUROCODE
6
ENV 1996-1-1: 1999
ENV 1996-1-2' 1995
ENV 1996-1-3: 1998
ENV 1996-2: 1999
EhV 1996-3: 1999

EUROCODE
7
ENV 1997-1: 1996
EUROCODE
8
Design provisions for earthquake resihtance of structures
ENV 1998-1-1 1994

ENV 1998-1-2: 1994
ENV 1998-1-3: 1995
ENV 1998-1-4: 'i996
ENV 1995-2: 1995
ENV 1998-3: 1997
ENV 1998-4: 1998
ENV 1998-5: 1994

EUROCODE 9
ENV 1999-1-1: 1958

ENV 1999-1-2: 1998
ENV 1999-2L 1998

FINLAND
National Building Code of Finland : 1994
Part B The strength of structures
B l R.1983
B 2 R. 1990 incl amendments)
B 3 R. 1976
B 4 G. 2000 or 2001
B 5 G. 1987
B 6 G. 1989
B 7 G. 1996
B 8 G. 1989
B 9 G 1993
B 10 G. 2000 or 2001
Structural safety and loads (Pbrt 5.6 Wind loads)

Load bearing structures
Foundations
Concrete structures
Structures of lightweight c o n e t e blocks
Lightweight gauge steel struTres
Steel structures
Brick structures
Structures of concrete blocks
Timber structures
I
Standards
Finnish Standards are only cited in Part 84 GBlO G of the Building Code! None are cited in the Regulations. A list of cited
standards is available.

Apart from Eurocodes local authority can accept the use of foreign standards in separate cases.
Regulatory Body
Minisby of the Environment
Housing and Building Department
PO Box 380
FIN40131 Helsinki
Finland
Tal: +358 9 19919655
Fax: +358 9 1991 9631
Web: www.vyh.fi
Notes
Local authorities carry the main responsibility for land-use planning and b ilding supervision.
The Building Act defines the rules for planning and building. The regional and-use plans drawn up by the Regional Councils guide
the master plans and the detailed plans of local authorities.
Adequate documentatlon must be acquired beforehand on the quality and use of structures and building materials and the quality is
controlled by initial tests and productiontests when needed.
1.
2.
3.
Building regulations may also be found in other legal provisions of the local authority such as public health, fire safety bye-laws,
and police orders.
The level of structural safety presaibed conforms to European perfohnance levels.
Guidelines for concrete structures are based on the CEB Model Code and consequently comply with international levels as to
content and ratings.
For
approval and certification:VTT Building Technology
PO Box 18011
(Betonimlehenkuja 3. Espoo)
FIN42044 WT. Finland
Tel: +358 9 456 1
Fax: +3589 456 7006
www.vtt.fi.rte
E-mail: rts@rts.%
Intemet www.rt$.fi
R Regulations are binding

G: Guidelines are voluntary and alternative approaches may be applied If requirements set for building are met.
'
0 BSI 2000
Sep-00
EUROCODES- Finland
EUROCODE 1
ENV 1991-1
ENV 1991-2-2
ENV 1991-2-3
ENV 1991-24
ENV 1991-2-5
ENV 1991-2-6
Basis of Design and actions on structures

idational Forward published
EUROCODE
2
ENV 1992-1-1
ENV 1992-1-2
ENV 1992-1-3
ENV 1992-1-4
ENV 1992-1-5
ENV 1992-1-6

National application Document published
The above parts of Eurocode 2 are not useld In practice but use is permitted
EUROCODE
3
ENV ? 993-1 1
ENV 1393-1-2
ENV 1993-1-3
ENV 1993-1-4
ENV 1993-! 5
ENV 1993-3-1
ENV 1993-3-2

EUROCODE
4
ENV 1994-1-1
ENV 1994-1-2
Design of composite steel and concrete StRUCtUreS

5
EIJROCODE
ENV ? 395-1-1
ENV 1995: -2
6
EUROCODE
ENV 1996-1-1
El:V 1996-1-2

The above parts of Eurocode 6 are not used in practice but use Is permitted
EUROCODE
7
ENV 1937-1
ENV 1997-2
ENV 1997-3
EUROCODE 8
Design provisions for earthquake resistance of structures

No action taken
EuROCODE9

No action taken





I
'
FRANCE
Le Code de la Construction et de I'habitation (3 Volumes)
There are no 'building regulations' as such but laws, decrees and ministdal orders that are legally binding.
Standards
Foundations
DTU P 11-211: 1988 DTU 1311
DTU P 11-711:1988 DTU 13-12
DTU 13.2-Pll-212 1992
Contract bill for superficial foundationb. contract bill of the spedal clauses.
Rules for the calculation of superficia/ foundations.
Deep foundation for building.
Loading
NF P 06-001 1986
NF PO6-004 : 1977
NF P06-005 : 1988
NF P75222. NF EN 12430:
1999
Basis for design of structures. Work1 'g loads for buildings

Basis for design of structures. PermJent and Service Loads due to Gravity
Basis for design of structures Notati ns. General Symbols.
Thermal insulating products for buildl, g applicatlons. Determination of behaviour under point
load.
Rules defining the effects on buildings of snow and wind

on buildings of snow and winds and appendices.
Rules NV 65. Rules defining the eff
DTU P 06-002. NV 65: 1994
Construction of individual houses an of related buildings. 1992 revised. PS-MI 89 Rules. Field
DTU P 06-006, N 84: 1996
"$
REGLES N 84 MODlFlEES 95
of application. Design. Construction

Action de la neige sur les constructions
Selsmlc effects.
NF PO6413,PS 92: 1995
NF P06-014.PS-MI :1995
steel structures
Earthquake resistant construction rul? Earthquake resistant rules

Applicable to buildings, called PS 92.
Earthquake resistant construction NI&. Earthquake resistant
1.
DTU P 22-201, DTU 32.1~1964 Contract bill for metal construction wyrk for building : Structural steelwork. Contract bill of the
spedal clauses
Regulations for the calculation of steel structures (called rules CM 66). (Edition August 1982).
DTU P 22-701, CM 66: 1966
3eme tirage de 1995
NF P22-202-1. DTU 32.2: 1993
NF P22-202-2. DTU 32.2: 1993
Buildingworks. Metal construction. Aluminium alloys framework. Part 1 :Technical

specifications
Building works. Private contracts. Mefal construction. Aluminium Alloys framework. Part 2 :
special clauses
Concrete structures
NF ~ 1 8 2 0 1 ,DTU 21: 1993
DTU 21
DTU P 18702,BAEL 91
DTU P 18703,BPEL 91
NF P10-210-1. DTU 22.1: 1993
NF Pl0-210-2, DTU 22.1: 1993
NF P18-210. DTU 23.1: 1993
Building works. Executionof concrete works. technical specifications

Technical Rules For The Design of R&hrced Concrete Structures According to the Limit States
Method. Rules BAEL 91
Technical Rules for the Design of Prestressed Concrete According to the timlt
States Method. Rules BPEL 91.
Buildingworks. Exterior cladding using large prefabricatedpanels of the solid or ribbed slab type
or ordinary concrete. Part 1 :Techni I spdcations
Buildingworks. Private contracts. Ext rior cladding using large prefabricated panels of the solid
or ribbed slab type or ordinary concre e. Part 2 : Special clauses.
Building works. In situ formed concrete walls. Technlcal specifications
Walls
Pl0-202-1. DTU 20.1:
1994DTU 20-1
P10-202-2. DTU 20.1: 1994
DTU 20-1
P i0-202-3, DTU 20.1 : 1994
DTU 20-1
Execution of work. small masonry unil walls. part 1 :Technical specifications

Execution of work. small masonry unil walls. part 2 :calculation rules and minimum construction
provislons.
Execution of work: small masonry unit walls. part 3 :guideline to choose the type of facade walls
according to the site.
llmber structures
NF P21-203-1, DTU 31.1: 1993
NF P21-203-2. DTU 31.1: 1993
NF P21-204-1, DTU 31.2: 1993
NF P21-204-2. DTU 31.2: 1993
NF P21-2052 DTU 31.3: 1995
0 BSI 2000
;b
Buildingworks. Timber frameworks a d stalrs. Part 1 :Technical specifications.

Building works. Private contracts. Tim er frameworks and stairs. Part 2 : Special clauses.
Buildingworks. Timber frame houses and buildings construction. Part 1 :Technical
specifications
Buildingworks. Private contracts. Timber frame houses and Buildings construction. Part 2 :
special clauses.
Timber structures connected with mete1plate fasteners or gussets. Part 2: Design rules
sep-oo

See Eurocodes
Regulatory Body
Ministre de Ibquipement, des Transports et du Logement (Ministry of Public Works, Transport and Housing)
Notes
Le Code de la Construction et de Ihabitation available from
Deirectiondes journaux Officiels
26 rue Desaix
75727 Paris Cedex 15
CSTB Centre Scientifique et Technique du Batiment
4 Avenue du Recteur Poincare
F-75782 PARIS Cedex 16

France
Tel: +33 I4b 58 79 79

Fax: +33 1 45 79 17 84
Tel: +33 I40 50 28 28
Fax: +33 1 45 25 61 51
http://www.cstb.fr
EUROCODES France
Any Eurocodes with their National application document can be used if reterencedin the contract as an experimental standard.
EUROCODE 1
Basis of design and action on

structures
XP ENV 1991-1,XP PO6-101

ENV 1991-1-1
XP ENV 1991-2-1, XP P 0 6
102-1
XP ENV 1991-2-2, XP P 0 6
102-2
XP ENV 1991-2-3. XP P 0 6
102-3
NF ENV 1991-2-4. NF P06-1024
XP ENV 19913, XP P 06103
FD ENV 1991-4. FD P 06104

National application document published

National application document publlshed
EUROCODE
2
ENV 1992-1-1, P 18-711
ENV 1992-1-2
XP ENV 1992-1-3, XP P la713
XP ENV 1992-1-4. XP P la714
XP ENV iw2-1-5, XP P la715
XP ENV 1992-16, XP P la716
NF ENV 1992-2, NF p i a 7 2 0
National application document expected 2000




National Fotward published
EUROCODE
3
XP ENV 1993-1-2. XP P 22312
XP ENV 1993-1-3. XP P22-313
PR ENV 1993-1-5. P22-315PR
PR ENV 1993-2, P22-3120PR
EUROCODE 4
Design of composite steel and aoncrete structures
XP ENV 1994-1-2. XP P 22-392

PR ENV 1994-2, XP P94-250-1
National Forward publlshed

I

EUROCODE 5
XP ENV 19951-1,XP P 21-711

XP ENV 19951-1, XP P2171l / A l
EUROCODE
6
ENV 19961-1
XP ENV 19961-2, XP P 10-612
EUROCODE
7
XP ENV 1997-1, XP P 94-250-1
EUROCODE
8
ENV iwai-1
XP ENV iggai-2, XP ~06-0312
Design provisions for earthqua$es and geo-technical aspects
,
Modified National Application Document
published


PR NF ENV 199814. PO6

033PR
NF ENV m a 2 , NF ~06-032
ENV 19983
ENV 19984
XP ENV 19985. XP POW35
0 BSI 2000

Sep-00
GERMANY
Each German 'Land' adopts and adapts the Federal Regulations; (MBO (Irlusterbauiordnung Model Building Regulations)
Federal Building Code Baugesetrbuch BauGB in the wording of the Actito Amend the Federal Building Code and to Reorder
Spatial Planning Law [BauROG] as issued on August 18th 1997 (BGBI. I
2081).(Federal Law Gazette I p. 2081,2102) amended
Federal Regional PlanningAct (Raumordnungsgesek (ROG) of 18 Augu t 1997
by Article 3 of the federal law of 15 December 1997 (Federal Law Gazette I p. 2902,2903)
1.
Standards
DIN 1055-100: 2000 DRAFT
Basis of design Part 100: Safety conppt and design rules
Design Loads
DIN 1055 1: 1978

DIN 1055 -1: 2000 DRAFT
DIN 1055 2: 1976

DIN 1055 3 1971
DIN 1055-3: 2000 DRAFT
DIN 1055 4/Al: 1987
DIN 1055 5/Al: 1994
Stored Materials, Building Materials a d Structural Members, Dead load and Angle of Friction
Action on structures Part 1: Densitletand weights of building materials, structural elements
and stored materials
Soil Characteristics; Specific Weight, p g l e of Friction, Cohesion, Angle of Wail Friction.
Design loads for buildings; Live loads.,
Action on structures Part 3: Self weight and imposed load in building
Live loads; Wind loads on structures ubsusceptibleto vibration.
Live Loads; Snow Load and Ice Load.
Building In Earthquake Zones

DIN 4149: 1981
DIN 414911Al: 1992
Design Loads, Dimensioning. Design nd Constructionof ConventionalBuildings

Design Loads, Analysis and Structura Design, usual buildings; amendment 1. map showing
earthquake areas
Steel Structures
DIN 18800-1: 1990
DIN 18800-1IAl: 1996
DIN 18800-2: 1990
DIN 18800-ZAl: 1996
DIN 188003: 1990
DIN 18800-WAl: 1996
DIN 188004: 1990
DIN 18800-7: 1983
Structural steelwork; design and cons ction

Steel structures Part 1: Design and nstruction; Amendment A1
Structural steelwork; analysis of safe against buckling of linear members and frames
Steel structures Stability Part 2 Bu kling of bars and skeletal structures; Amendment A I
Structural steelwork; analysis of safe against budding of plates
Steel structures Stability Part :Buck ing of plates; Amendment AI
Structural steelwork; analysis of safe against buckling of shells
Steel structures; Fabrication,verificati$n of suitability for welding
Aluminium Structures
DIN 4113-1: 1980
DIN 4113-2 : 1993
Aluminium constructions under predominantly static loading; static analysis and structural design
Aluminium constructions under predortrinantly static loading; static analysis, structural design
and execution of welded construction$
Masonry Structures
DIN 1053-1: 1996
DIN 1053-2 : 1996
DIN 1053-3 : 1990
DIN 1053-4 : 1978
DIN 10534: 1999 DRAFT
Masonry
Masonry
Masonry
Masonry
Masonry
- Design and construction
-- Masonry
strength classes o the basis of suitability tests
Relnforced masonry; desig and construction
- Buildings of Prefabricated rickwork Components

- Part 4: Prefabricatedmasodry compound units
limber Structures
DIN 1052-1: 1988 +Al: 1996
DIN 1052-2: 1988+Al: 1996
DIN 1052-3: 1988+A1: 1996
Structural use of timber; design and

Structural we of timber; mechanical
Structural we of timber; buildings in
construction; design and construction
Composite Structures
DIN 18800-5 1999 DRAFT
DIN 18806-1:
Steel structures Part 5: Composite spel and concrete structures; design and construction
Composite steel and concrete structurb; composite columns

See Eurocodes
Regulatory Body
Bundesministerium fiir Verkehr, Bau- und Wohnungswesen
Federal Minisby of Transport, Building and Housing,
Krausenstrasse 17-20,
10117 Berlin
0 BSI 2001
Dqutsches lnstitut fir Bautecknik
Aug-Ol
EUROCODES - Germany
EUROCODE 1
DIN V ENV 1991-1
DIN V ENV 1991-2-1
DIN V ENV 1991-2-2
DIN V ENV 1991-2-3
DIN V ENV 1991-24
DIN V ENV 1991-2-5
DIN V ENV 1991-2-6
DIN V ENV 1991-2-7
DIN V ENV 1991-3
DIN V ENV 19914
DIN V ENV 1991-5

StNctUreS
Conversion onto DIN 1055
National forward publishedwith explications
EUROCODE 2
DIN V ENV 1992-1
DIN V ENV 1992-1-2
DIN V ENV 1992-1-3
DIN V ENV 1992-14
DIN V ENV 1992-1-5
DIN V ENV 1992-1-6
DIN V ENV 1992-2
EUROCODE 3
DIN V ENV 1993-1-1
National forward published
'
National Application Document published 6/95

Technical report published
National Application Document in preparation
NAD published as Guideline 103 of the
Deutschen Ausschusses Mr Stahlbau
NAD published as DIN Technical Report
NAD or Guideline published
NAD or Guideline publlshed
DIN V ENV 1993-1-2

DIN V ENV 1993-1-3
DIN V ENV 1993-14
DIN V ENV 1993-1-5
DIN V ENV 1993-1-6
DIN V ENV 1993-1-7
DIN V ENV 1993-2
DIN V ENV 1993-3
DIN V ENV 19934
DIN V ENV 1993-5
DIN V ENV 1993-6
EUROCODE 4
DIN V ENV 1994-1-1
Design of composite steel and
DIN V ENV 1994-1-2

DIN V ENV 1994-2
EUROCODE 5
DIN V ENV 19951-1
DIN V ENV 19951-2
DIN V ENV 19952
Design of timber structums
EUROCODE 6
DIN V ENV 19961-1
DIN V ENV 19961-2
DIN V ENV 1996-1-3
DIN V EM/ 1996-2
DIN V ENV 1996-3
Design of masonry structure
cone+ structures
NAD published as Guideline 104 of Deutschen

Ausschusses Mr Stahlbau
NAD tor Guideline published

Technical report No 60 published

EUROCODE 7
DIN V ENV 1997-1
DIN V ENV 1997-2
DIN V ENV 1997-3
EUROCODE 8
DIN V ENV 1998-1-1
DIN V ENV 1998-1-2
DIN V ENV 1 W 1 - 3
DIN V ENV 1998-14
DIN V ENV 1998-2
DIN v ENV 1998-3
DIN V ENV 19984
DIN V ENV 1998-5
Design provisions for earthquake residtance of structures

EUROCODE 9
Design of Aluminium structures
National Annex published

No action taken
GREECE
General Building Code and Building Construction Regulations (GOK) Dectee N.1577 18 December 1995
Loading of structures
Royal Decree 10/31-12-1945 (FEK 32 A)
Ministerial Decision D l lE/O/30123/21 10-1991 (FEK 1068JB), as modified by Ministerial
Design and constructlon of
Decision Dllb/12/33-1995 (FEK227 )
concrete structures
Ministerial Decision EDl7a/08/32/FN W30-9-1992 (FEK 613/8), as modified by Ministerial
Earthquake design
Decision D17a/04/46 FN 27W20-6-1 5 (FEK 534/B)
Ministerial Decision ED2a/01/22/8-3-8 (FEK 22618). as modified by Ministerial Decision
Concrete technology
~14/19iwna3-1997(FEK 3 1 ~ ~ )
Steel Structures General rules Ministerial Decree D l lb/031/!3-5-199lj (FEK 383/B) for Eurocode 3 Part 1-1
and rules for building
Ministerial Decree D11b/049/21-8-19$6 (FEK S O W ) for Eurocode 6 Part 1.l
Masonry Structures - Rules for
reinforced and unreinforcad
masonry
Ministerial Decree D l 1b/49/5-7-1= IFEK 383) for Eurocode 2 (Pre cast concrete structures
Pre cast concrete structures
Standards
Loading
See regulations
Earthquake resistant design

See regulations
Steel structures
protective paint systems - Part

protective paint systems - Part
protective paint systems Part
LOT EN IS0 12944-3: 1998

LOT EN IS0 12944-5: 1998
ELOT EN IS0 12944-7: 1998
and aluminium coatings
ELOT EN IS0 14713: 1999

Guidelines (IS0 14713:1999)
Concrete structures
ELOT EN 523: 1998
ELOT EN 524-1: 1998
LOT EN 524-2: 1997
ELOT EN 5 2 4 4 1997
ELOT EN 524-5: 1997
ELOT EN 990: 1996
LOT EN 1504-1: 1998
Steel strip sheaths for prestressing te dons Terminology, requirements. quality control
Steel strip sheaths for prestressing teqdons -Test methods Part 1: Determination of shape and
dimensions
Steel strip sheaths for prestressing teodons Test methods Part 2: Determination of flexural
behaviour
Steel strip sheaths for prestressing teddons Test methods Part 4: Determination of lateral
load resistance
Steel strip sheaths for prestressing teqdons Test methods Part 4: Determination of lateral
load resistance
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated
Crete with open structure
concrete and lightweight aggregate
Products and systems for the protecti n and repair of concrete structures Definitions.
requirements, quality control and eva ation of conformity Part 1: Definitions
Tlmber Structures
ELOT EN 380: 1994
ELOT EN 383:1994
ELOT EN 384: 1995
ELOT EN 392: 1995
ELOT EN 408: 1995
ELOT EN 409 1995
ELOT EN 518: 1995
ELOT EN 595: 1995
ELOT EN 596: 1995
ELOT EN 789: 1996
ELOT EN 1193: 1998
0 BSI 2001
Masonry structures
ELOT EN 1052-1: 1998
ELOT EN 1934:1998
Methods of test for masonry Part 1: Qetenninationof compressive strength

Thermal performanceof buildings Ddtermlnationof thermal resistance by hot box method
using heat flow meter Masonry
Timber structures Test methods G neral principles for static load testing
of embedding strength and foundation values
Timber structures Test methods D~ermination
for dowel type fasteners
Structural timber Determinationof ch racteristic values of mechanical properties and density
Glued laminated timber Shear test ofglue lines
Timber structures Structural timber abd glued laminated timber Determination of some
physical and mechanical properties
Timber structures Test methods Dqkermination of the yield moment of dowel type fasteners
Nails
Structural timber Grading Requireients for visual strength grading standards
Timber structures Test methods Test of trusses for the determination of strength and
deformation behaviour
Timber structures Test methods Soft body impact test of timber framed walls
Timber structures Test methods Dqkermination of mechanical properties of wood based
panels
Timber structures Structural timber apd glued laminated timber Determination of shear
strength and mechanical propertles pdrpendicutar to the grain
Aug-Ol
ELOT EN 1195: 1998

ELOT EN 26891
ELOT EN 28970
Timber structures Test methods Performan e of structural floor decking

Timber structures Joints made with mechani Ifasteners General principles for the
determination of strength and deformation ch cteristics
Timber structures Testing of joints made with mechanical fasteners Requirements for wood
density

All existing Eurocodes have been translated into Greek as ELOT ENV 199X-XX etc. When national regulations do not cover the
design of certain types of structures, then the corresponding Eurocodes apply ( She regulations)
All EN and IS0 documents listed are also acceptable.
Regulatory Body
Ministry of Environment and Public Works
17 Amaliados Street
GR-115 23 Athens
Greece
Tel: +301 643 1461-9
Fax: +301 644 7608
GR 104-32 Athens
Tel: +30 1 523 3184
Fax: +30 1 523 4312
Tel:+30 1 212i04 37
Fax:+30 1 228 31 35
ICELAND
National Regulation
National Building Regulation July 1998
Standards
Loading
IST 12 : 1989
IST 13 : 1989
Loads for the design of structures

( based on Danish Standard 410 )
Design and calculation of load with redpect to earthquakes.
Foundations
IST 15 : 1990 (based on Danish

Standard 415 )
Foundation engineering
IST DS 409: 1982 ( adopted as

IST 1989)
IST 14 : 1989
IST 1989)
IST DS 4; 3 1982 ( adopted as
IST 1989)
IST 1989)
Safety of structures
Structural use of concrete
structural use of steel
Structural use of timber
Structural use of aluminium
General
IST 30 A988
Conditions of contract for building andlworks of civil engineering construction
Acceptable foreign standards
Regulatory Body
- Responsiblefor Housing
Mlnisby of lndusby and Commerce

Amarhvoli
IS 150 Reykjavik. Iceland
Tel: +354 560 9070

Fax: +354 562 1289
E-mail: postur@el.stjr.is
Website: www.stjr.is/fel
Notes
Planning Agency
Laugavegur 166 150 Reykjavik Iceland
Phone: 354-5624100 Fax: -354-5624165
email: postmaster@skipulag.is
Icelandic Building Research Institute(IBRI)
Rb-Keidnaholt
I S 112 Reykjavik
iceland
Tel: +354 570 7300P
Fax: +354 570 7311
Revlslon of the Building standards above Is due to start during 2000.
0 BSI 2000
Sep-OO
IRELAND
Building Regulations 1997
Standards
Foundations
BS 8004: 1986
Code of practice for foundations
Loading
CP 3: Chapter V Part 2: 1972
BS 5080 Part 1: 1974 (1982)
BS 5080: Part 2: 1986
BS 6399: Part 11984
BS 6399: Part 3: 1988
Wind loads
Tensile loading AMD 3821
Method for determining resistance to 10 'ding shear
Code of practice for dead and imposedloads AMD 4949, AMD 5881, AMD 6031
Code of practice for imposed roof loads,
steel StNctUreS
CP 117: Part 1: 1965
BS 449: Part 2: 1969
BS 5950: Part 1: 1985
BS 5950: Part 2: 1985

BS 5950: Part 3-1: 1990
BS 5950: Part 5: 1987
Structural use of steelwork in building we ofpractice for design in simple and continuous
construction: hot rolled sections
Structural use of steelwork in building Specificationfor materials, fabrlcation and erection: hot
rolled sections AMD 6526
Structural use of steelwork in building esign in composite constructionsection Code of
practice for design of floors with profiled steel sheetlng
Structural use of steelwork in building b d e of practice for design of cold formed sections AMD
5957
P
-
CP 118: 1969
The structural use of aluminium
Concrete Structures
IS 326: 1988
Masonry Structures
IS 3251: 1986
BS 5390: 1976 (1984)
BS 5628 Part 1: 1978 (1985)
BS 5628: Part 3: 1985
Timber structures
SR 11: 1988
BS 5268: Part 2: 1989
Code of practice for the structural use of concrete

Code of practice for
4974
Structural timber for domestic constructi n
Structural use of timber Part 2: Code olpractice for permissible stress design, materials and
workmanship

See Eurocodes
Regulatory Body
Department of the Environmentand Local Government
The Custom House
Dublin 1
Tel: +353 1 888 2000
LoCall: 1890 20 20 21
0BSI 2000
Sep-00
Notes
Technical Guidance documents on the National Building Regulations are available from
Government Publications Sale Office,
Sun Alliance House, Molesworth
Street, Dublin 2
Telephone (01) 6613111
Building control is run by local authorities County Councils, County Borough Cwporations, Borough Corporations and Urban
District Councils.
Ireland also has an independent third party Planning Appeals Board An Bord Pleanala
Approval and testing is carried out by
National Standards Authority of Ireland
Glasnevin
Dublin 9
Republic of Ireland
Tel: +353 1 837 0101
Fax: ~ 3 5 31 807 38 38
ELJROCODES - Ireland
EUROCODE
1
ENV 1991-1: 1995
ENV 1991-2-3: 1995
ENV 1991-24: 1995
ENV 1991-2: ,1995
EiW 1991-4: 1905

structures
No National Forwards published
NationalApplication Document published

ELJ;~OCODE
2
ISlEFiV 1992-1-1: 195;
XISIENL' 1992-1-2: 1996
XlSlENV 1992-1-3: 1995
ENV 1992-14
ENV 1992-1-5
ENV 1992-1.6
EUROCODE
3
XlSlENV 1993- :-1 1995
ENV 1993-1-2
EUROCODE
4
ENV 1994-1-1
ENV 1994-1-2: 1998
EUROCODE
5
ENV 1995-1-1: 1995
Design of Timber structures
EUROCODE
6

ENV 1996-1- 1: 1996
EUROCODE
7
Geo-technical deisgn
ENV 1997-1: 1994
EUROCODE
8
Design for provision of earthquakes and geo-technical aspects

ENV 1998-1-1
ENV 198-1-2
ENV 1998-1-3: 1995
ENV 1998-14 1996
ENV 1998-2
ENV 1998-3: 199b
ENV 19984: 1998
ENV 1998-5
EUROCODE
9

No action taken
ITALY
Law N. 1086 Sm Novemberl971: Law for the Design and Execution of sbdctures reinforced and prestressed concrete and metal.
Ministerial Decree 9 Jan 1996 Technical Regulations for the calculation, eltecution, and testing of reinforced and pre-stressed
concrete and metal
Circolare no. 252 15 Oct 1996 Instructionsfor the application of "Technid regulationsfor the calculation, execution, and testing of
reinforced and prestressed concrete and metal"
Law N. 64 2@February 1974: Law for construction with particular reference to Seismic zones
Ministerial Decree 16 Jan 1996 Technical regulations for earthquake resis ent structures
Circolare no 69AA GA 10 aprill996 Instructionsfor the application of" T chnical regulations for eatthquake resistent structures"
MinisterialDecree 16 Jan 1996 Technical regulations about general criteribs for actions on constructions
Circolare no 156/AA GA 4 jull996 Instructionsfor the application of " Tedhnical regulations about general criterias for actions on
constructions"
Other technical regulations about foundations, masonry, pre-casting structures. dams, bridges, a.s.0 are available on request
Standards
Loading
UN1 9053-1:1987
UN1 9053-2:1987
Earthquake resistance
UN1 9742:1990
in situ built. Points position for dimenslonal

situ built. Points position for dimensional
and geometrical measurement in assemblies or construction
Ratcheting evaluation for structural cohponents in elevated temperature service with seismic
loads
Steel structures
CNR UN1 10011:1988
UN1 ENV 1993-1-1: 1994
UN1 8634:1985
UN1 7876:1978
Concrete structures
UN1 ENV 1992-1-1: 1993
Steel structures. Instructions of design' construction, testing and maintenance

Design of steel structures General ru es and rules for buildings
Aluminium alloy structures. Instruction6for design and construction

Aluminium structures. Selection of alu@iniumand aluminium alloys for structures
Design of concrete structures General rules and NI-
for building
Masonry structures
None listed
Timber structures
SS UN1 U40.06.198.0
Solid timber in structural sizes. Detemiination of some physical and mechanical properties

All Eurocodes are used in Italy as voluntary standards.
National forewords are inserted in all the Eurocodes.
EM/ 1992-1-1 and ENV 19991-1 are cited in decrees and so have a legal status, with some modifications.
Regulatory Body
Ministerio dei Lavori Pubblici
Servizio Tecnico Centrale
Tel+39 06 4412 4101
Fax +39 06 4426 7383
Notes
Guidelines for Planning, Execution and Testing of structures against earthbuakes (1998) published by Servizio Tecnico Centrale
OBSI 2002
Jan-2002
NETHERLANDS
Bouwbesluit (building decree) of 1990, published in Law Gazette 1990,
The last amendment was published in Law Gazette 2002,203
Building decree holding technical regulations concerning the constructionof constructionworks and the state of existing
construction works
(This decree is based on the Housing Law but covers all building and structural work.)
Standards
NEN 6700:1991/A1: 1997
Technical principles for building struclures TGB 1990
Loading
NEN 6702:1991/Al: 1997
TGB 1990 Loadings and deformations
NEN 2608:
Glass in building Resistance agains windloading
Geotechnical design
- Requirementsand determination method
NEN 6740:1991/A1:1997
Geotechnics TGB 1990 Basic requirements and loads
NEN 6743:1991
Geotechnics - Calculation methad for bearing capacity of pile foundation Compression piles
NEN 6744:1991
Geotechnics - Calculation methad for shallow foundations
Steel structures
NEN 6072:1991/A1:1997
NEN 6770:1997
NEN 6771:2000
NEN 6772:2000
NEN 6773:2000
NEN 6774:2000
NEN 6786:1998
NEN 6788:1995/A1:1999
Determination by calculation of the fire resistance of building elements. Steel structures

TGB 1990 Steel structures Basic rdquirements and basic rules for calculationof
predominantly statically loaded
TGB 1990 Steel structures - Stabili
TGB 1990 Steel structures and basic rules for calculationand test of
TGB 1990 Steel structures
predoninantly statically loaded thin ga/uge sections and corrugated sheeting.
TGB 1990 Steel structures Requiqements for steel qualities for construction steels in relation
to brittle fracture of pre-dominantly s tically loaded structures
Rules for the design of moveable (mlbile) bridges
Design of steel bridges Basic requirements and simplified rules
NEN 6710:1991/A1:1997
Technical principlesfor building struclures TGB 1990; Aluminium structures. Basic

requirements and basic rules for calcqrlation of predominantlystatically loaded structures
Concrete structures
NEN 6071:1991/A1:1997
NEN 6720 :1995/Al 3997:
NEN 6723:1995
Masonry structures
NEN 6790 :1991/A1 :1997
It
Determinationby calculation of the fir resistance of building elements. Concrete structures.

TGB 199ONBC 1995 Regulations r concrete Structural requirementsand calculation
methods
Concrete bridges Structural requirements and calculation methods
TGB 1990 Masonry structures Basic requirements and determinationmethods
Timber structures
NEN 60731991/A1:1997
NEN 6760:1997
NEN 6762:1997
NEN 6763:1996
NEN 6765:2001
Determinationby calculationof the fir+ resistance of building elements. Timber structures

TGB-1990 Timber structures General principles Requirementsand determination methods
Dowel type fasteeners for use in loadibearing timber structures.
Glue laminated timber Product cha$cteristics and determination methods
Connections for timber structures- Determination of strenth and stiffness.
Roof covering
NEN 6707:1991/A1:1997
Fixed roof coverings. Requirements and determinationmethods

See Eurocodes
Regulatory Body
Ministerie van Volkhuisvesting Ruimtelijke Ordening en Milieubeheer (VRDM)
Ministry of Housing, Spatial Planning, and the Environment
0 BSI 2002
July 2002
BSI international Survey
Notes
Building decree and Building regulations are enforced by the local authorftieswho also deal with permits.
Vereniging van Nederlandse Gemeenten
Nassaulaan 12
Postbus 30435
2500 GK Den Haag
tel: 070 - 373 83 93
fax: 070 - 363 56 82
EUROCODES - Netherlands
EUROCODE
1
ENV 1991-1
ENV 1991-2-1
ENV 1991-2-2
ENV 1991-2-3
ENV 1991-2-4
ENV 1991-2-5
ENV 1991-2-7
ENV 1991-3
ENV 1991-4
ENV 1991-5
ENV 1991: Basis of design and actions oh structures
EUROCODE
2
ENV 1992-1-1
ENV 1992-1-2
ENV 1992-1-3
ENV 1992-1-4
ENV 1992-1-5
ENV 1992-1-6
ENV 1992-2
ENV 1992: Design of concrete structures
EUROCODE
3
ENV 1993-1-1
ENV 1993-1-2
ENV 1993-1-1/Al
ENV 1993-1-1/A
ENV 1993-1-3
EUROCODE
4
ENV 1994-1-1
Design of composite steel and concrete Qtructures
EUROCODE
5
ENV 19951-1
ENV 1995-1-2
EUROCODE
6
ENV 1996-1-1
ENV 1996-1-1
EUROCODE 7
ENV 1997-1ENV 1997-2

ENV 1997-3
Expectedsoon
Expectedsoon
Expected soon
EUROCODE 8
Design provisions for earthquakes and ggotechnlcal aspects
National Application Document Published

NationalApplication Document Published



No action taken
EUROCODE
9

No action taken
0 BSI 2002
July 2002
NORWAY
National Building
Code
Technical Regulations under the Building and PlanningAct 1997

Regulations concerning requirementsbr construction works and products for construction
works.
StandardslRegulations
NS 3481: 1989
Soil investigation and geo-technical d+gn for marine structures
Loading
NS 3479: 1990
Design of structures Design loads

Informationcurrently unvaiiable
Steel structures
NS 470: 1969
NS 3472: 1984
NS 5514: 1978
NS 3471: 1973
Concrete structures
NS 3475: 1975
Masonry structures
NS 3475: 1981
limber structures
NS 3470: 1989
NS 3476: 1988
Rules for the design and fabrication of welded steel structures

Design rules Steel structures
Design rules Cranes and lmng applignces Steel structures
Design rules -Aluminium structures
Design rules Concrete structures
Design rules - Timber structures
Design rules Masonry structures
Composite structures of steel and concrete

See Eurocodes
Regulatory Body
Kommunal-Og Regionaledepartmentet (KRD)
Ministry of Local Government and Regional Development
Notes
National Office of Building Technology and Administration

PO Box 8742 Youngstorget
N-0026 Oslo
Norway
Tel: +47 22 47 56 00
Fax: +47 22 47 56 11
Website: www.bebbygg.no
Norges Byggstandardiserings~~o~egian
Council for Building Standardization
Forskningsveien3 b.
P.0.Box 129 Blindem
N-0314 OSLO
Tel: +47 22 96 59 50
fax +47 22 60 85 70
email: nbr@nbs.no
URL: www.nbs.no
0 BSI 2000
Sep-00
EUROCODES - Norway
EUROCODE
1
ENV 1991: Basis of design and actions on structures

No action taken
ENV 1992: Design of concrete
EUROCODE
2
ENV 1992-1-1
f&&%\yFo%ard published
EUROCODE
3
ENV 1993-1-1
EUROCODE
4
ENV 1994-1-1

EUROCODE
5
ENV 1995-1-1
EUROCODE
6
No action taken
EUROCODE
7
ENV 1997-1
EUROCODE
8
Design provisions for earthquakes and geotechnical aspects

No action taken
EUROCODE
9

No action taken
PORTUGAL
RGEU Regulamentodas Edifica@es Urbanas
The RGEU is divided into three sections:
Documents containing design and execution standards of which )43 are of a general nature, 52 concern the location of
buildings and 11 the execution of the project
Documents listing the technical standards applicable to specific #pes of construction project. such as water supply, waste
water systems, gas, electridty and industrial establishments
Documents containing the technical standards applicable to builqing projects which are carried out in autonomous regions
of Madeira and the Azores
Standards
Loading
Decreto-Le1235183
Potuguese Loading Regulations. Stru@uralSafety and loading regulations for buildings and
bridges
INCES 5
Portuguese Earthquake Resistant regpiations 1987.
steel StNdUreS
Decreto-Lei 211/88
Regulations for steel structures in builbings
Concrete structures
Decreto-Lei 3494C83
Structures of reinforced concrete

See Eurocodes
Regulatory Body
Ministry of Public Works. Planning and Regional Administration
National Laboratory of Civil Engineering
LNEGLaboraMrio Nacional de Engenharia Civil
AV. do Brasil, 101,
1799 Usboa Codex
Tel: +351 1 848 213.
Fax: +351 1 849 7660
Notes
New local and imported construction materials or processes need to be approved by the LNEGLaboraMrio Nacional de Engenharia
Civil (National Laboratory of Civil Engineering),
which undertakes a study and issues a RecWication Document.
AECOPS-Associa@o de Empresas de ConstruHo e Obras Pljbiicas
Rua Duque de Palmela, 20,
1250 Lisboa
Tel: 1-311 0200. Fax: 1-3554810
0 BSI 2000
sep-oo
EUROCODES Portugal
Basis of Design and actions on
structures
ENV 1991-1-1
National Forward published (Portugese)
EUROCODE
2
ENV 1992-1-1: 1993
EUROCODE3
ENV 1993-1-1: 1993
EUROCODE~
ENV 1994-1-1: 1994
Design of composite steel and concrele structures
EUROCODE 5
ENV 19951-1: 1994
EUROCODE
6

No action taken
EUROCODE
7
ENV 1997-1: 1996
Geo-technicai design
EUROCODE
8
Design provisions for earthquake resi$tance of structures

No action taken
EUROCODE
9

No action taken
SPAIN
Bullding Act Act W l 9 9 9 of 5" November 1999'
Real Decreto 1650/1977dei Ministerio de ia Viiienda
NBEAE 88 Actions on structures Decreto 195/1963, Real Decreto 137Uf1988
Ch. 1: General
Ch 2: Gravitational Forces
Ch 3: Superioads of Use
Ch 4: Snow supedoads
Ch 5: Wind Action
Ch 6 Thermic and Rheoiogic Action
Ch 7: Earthquake Actions
Ch 8: Pressures on Cementation soil
Ch 9: Groundthrusts
Plus: Building Engineering standards, ECG: Gravitational Forces, ECR! Retraction Forces, ECS: Seismic Forces. ECT Thermal
Forces, ECV Wind forces
NBE-EA95 Steel structures in construction Real Decreto 1829/1995
NBE-FL-90 Resistantbrick walls Real Decreto 1723/1990
NBE-QB-90 Impermeable bitumen covets Real Decreto 1572/1990
NBE-CA-88Acoustic requirements in buildings Real Decreto 190911981
NBE-CPI-96 Protection against fire Real Decreto 2177/1996
NBE-CT-79 Thermal conditions in buildings Real Decreto 2429/1979
NCSE-94 Seismic resistance Construction Standard: General and building Real Decreto 2543/1994
EHE Instruction for structural concrete Reinforced and prestr6ssed
EF-96 Instructions for design and execution of unidirectional castings of reinforced and prestressed concrete.
Standards
UNE 76207: 1991
Bases for the design of structures NQtations General symbols
Loadlng
See regulations
See regulations
Steel structures
UNE 76101: 1990
Construction of steel structures
Concrete structures
See regulations
limber structures
UNE-EN 26891: 1992
UNE-EN 28970 1992
UNE-EN 380: 1998
UNE-EN 338: 1995
Timber structures Joints made with echanical fasteners. General principles for the
determination of strength and deform tion characteristics (IS0 6891)
Timber structures. Testing of joints m de with mechanical fasteners requirements for wood
density (IS0 8970)
Timber structures -test methods Geheral prindpiesfor static load testing

Structural timber Strength classes

See Eurocodes
Regulatory Body
Ministerio de la Vivienda
Ministerio de Obras Plibllcas y Urbanismo
Notes
'This law authorises the government to approve, by means of a Royal D ee within two years of this act coming Into force. a
Technical Building Code which establishes the requirements to be met by buildings in relation to the basic requirements. Until such
approval the Basic Building Regulations (NBE (Normas BBsicas de la Edi caci6n) shall be used to satisfy such basic requirements.
0 BSI 2000
Sep-00
EUROCODES - Spain
EUROCODE
1
ENV 1991-1-1
ENV 1991-2-2
ENV 1991-2-3
ENV 1991-2-4
ENV 1991-2-5
ENV 1991-2-6
ENV 1991-3
ENV 19914
EUROCODE
2
ENV 1992-1-1
ENV 1992-1-2
ENV 1921-1-3
ENV 1992-1-4
ENV 1992-1-5
ENV 1992-1-6
ENV 1992-2
EUROCOOE
3
ENV 1993-1-1


6!!!%&%%ard
published

EUROCODE
4
ENV 1994-1-1
ENV 1994-1-2

EUROCODE
5
ENV 1935-1-1
ENV 1095-1-2


EUROCODE 6
ENV 1996-1-1
7
EUROCODE
ENV 1997-1
EUROCODE
8
ENV 1998-1-1
ENV 1998-1-2
ENV 1998-2
ENV 1998-5

EUROCODE
9

No action taken
Natiolral Application document published

,
...
Building Regulations, BBR Of the Swedish Board of Housing, Building an Planning (BFS 1993:57 with amendments to BFS
1998:38) contains mandatory provisions and general recommendations p rsuant to the planning and Building Act (1987:10), PBL,
the Planning and Building Decree (1987:383), the Act on Technical requir ments for ConstructionWorks etc (1994:847) and the
Decree on technical requirementsfor ConstructionWorks etc (1994:12151.
Design Regulations, BKR Of the Swedish Board of Housing, Building and/planning(BFS 1993:58 with amendments'toBFS
1998:39) pursuant to the Planningand Building Act (1987:10), PBL, the A@on Technical requirementsfor Construction Works etc
(1994:847) and the Decree on technical Requirements for Constructionbhrks etc (1994:1215)
Section 2: General Regulationsfor loadbearing structures

Section 3: Actions
Section 5: Timber structures
Section 6: Masonry structures
Section 7: Concrete structures
Section 8: Steel structures
Section 9: Aluminium structures
Section 10: Resistancein case of fire
Standards
There are no mandatory standards in Sweden.

See Eurocodes
Regulatory Body
Boverket
Building and Housing Administration
Physical address Drottninggatan18
Postal adress: Box 534
371 23 KARLSKRONA
Tel: +46 45535 30 00
fax:+46 45535 31 00
www. boverketse
Notes
Planning permits from Local authorities
Sweden has a non-mandatory system for technical approvals of building products handled by ackredited approval bodies.
E.g:
SITAC Swedish Institute for Technical Approval
Tel: +46 455 20600
httpYhww.sitac.se
BKR and BBR are available in English at the web-site
www.boverket.se
or from
publikationsservice@boverket.se
0 BSI 2002
July 2002
EUROCODES Sweden
EUROCODE
ENV 1991-1-1
ENV 1991-2-2
ENV 1991-2-3
ENV 1991-2-5
ENV 1991-2-7
ENV 1991-3
ENV 1991-4
EUROCODE
2
ENV 1992-1-1
ENV 1992-1-2
ENV 1922-1-3
ENV 1992-1-4
ENV 1992-1-5
ENV 1992-1-6
ENV 1992-2
ENV 1992-4
ENV 1991: Basis of design and actiOns on structures


structures

NationalApplication document published
EUROCODE
3
ENV 1993-1-1
ENV 1993-1-2
ENV 1993-1-3
ENV 1993-1-4
ENV 1993-1-5
ENV 1993-2
ENV 1993-3-2
ENV 199343

EUROCODE 4
ENV 1994-1-1
ENV 1994-1-2

EUROCODE 5
ENV 19951-1
ENV 19951-2
ENV 19952

EUROCODE 6
ENV 1996-1-1
ENV 1996-1-3

EUROCODE
7
ENV 1997-1
ENV 1997-2
ENV 1997-3
EUROCODE 8
Design provisions for earthquakes dnd geotechnicai aspects

Design of composite steel and concpte structures


No action taken
EUROCODE
9
ENV 19941-1
ENV 1999-2
0 BSI 2002

July 2002
SWITZERLAND
There is no single Building Code in Swikerland but many regulations. The Central Governmentmakes no prescriptions to buildings
not owned by itself. The 25 Cantons co-ordinate the Regulationswith the ;local Municipality.
Standards
Loading
SIA 160: 1989 SN 505160
Actions on structures
Steel structures
SIA 161: 1990 SN 555161
SIA 161/1: 1990 SN 555161-1
Steel structures
Steel structures Quality managemedt, operation. testing, materials
Concrete structures
SIA 162: 1993 SN 562162
SA1 162-1: 1989
Concrete structures
Concrete structures Materials testing
Masonry structures
SIA 177: 1995
Masonry structures
limber Structures
SIA 164: 1992 SN 553164
SIA 164-1: 1986
Timber structures
Timber materials
SIA 162/6: 1999
Steel reinforced concrete

See Eurocodes
Swiss Building standards are not mandatory. Engineers can use any Desi n standards if agreed with the owner of the building. The
owner on the other hand has to make sure, that his work is safe to users tnd the public and has therefore an interest that standards
are used. This is normally documented In the contract agreements. If any gispute arises the law tends to accept standard as "state
of the art". So its good practice to use standards but it is not mandatory.
Regulatory Body
There is no single Regulatory Body in Swikerland.
Notes
Building Standards are taken care of by
Swiss Society of Engineers and Architects
Selnaustrasse 16
Ch 8039 ZOrich
Tel: +41 1 283 15 15

Fax: +41 1 201 63 35
www.sia.ch
a
0 BSI 2000
Sep-00
EUROCOLJES - Switzerland
EUROCODE
1
ENV 1991-1-1
ENV 1991-2-2
ENV 1991-2-3
ENV 1991-2-4
ENV 1991-2-5
ENV 1991-3
ENV 1991-4
EUROCODE
2
ENV 1992-1-1
ENV 1992-1-2
ENV 1921-1-3
ENV 1992-1-4
ENV 1992-1-5
ENV 1992-1-6
ENV 1392-2


structures
EUROCODE 3
ENV 1993-1-1
ENV 1993-1-2
ENV 1993-1-3
ENV 1993-3-2

EUROCODE
4
ENV 1994-1-1
ENV 1994-1-2

EUROCODE
5
ENV 1995-1-1
ENV 1995-1-2

EUROCODE
7
ENV 1997-1
EUROCODE 9


Design of composite steel and concreie structures
EUROCODE
6
ENV 1996-1-1
ENV 1996-1-3
EUROCODE 8
ENV 1991-1-1
ENV 1998-1-2
ENV 1998-1-3
ENV 1998-2





No action taken

BSI International Suwey
UNITED KINGDOM
The Building Regulations: 2000 plus amendments
Approved Document A Structure
Standards
BS 8004:1986
Code of practice for foundations
Loading
BS 6399-1: 1996
BS 6399-2: 1997
BS 6399-3: 1988
CP3CHVPart2:1972
for dead and imposed loads
Loading for buiidings. Code of practi
(proposed for declaration of

obsolescence)
None
Steel structures
BS 449-2: 1969
BS 5950-1: 2000
BS 5950-2: 1992
BS 5950-3: Section 3.1: 1990
BS 5950: Part 4: 1994
BS 5950: Part 5: 1998
BS 5950 Part 6: 1995
BS 5950: Part 7 1992
BS 5950:Part 8:1990
BS 5950:Part 9:1994
tee1 in building. Metric units

Specification for the use of
Code of practice for design in simple and continuous
Structural use of steelwork in
construction: hot rolled sections.
Structural use of steelwork in building.;Specification for materials, fabrication and erection: hotrolled sections
Structural use of Steelwork in building.' Design in composite construction.
Structural use of steelwork in building.ICode of practice for design of composite slabs with
proflledsteel sheeting.
Structural use of steelwork in buildlng.'Code of practice for design of cold formed sections.
Structural use of steelwork in buildingjCodeof practice for design of light gauge profiled steel
sheeting.
Specification for materials and workmenship: cold formed sections. Structural use of steelwork in
building.
Structural use of steelwork in building.'Code of practice for fire resistant design.
Structural use of steelwork in building.,Code of practice for stressed skin design.
BS 8118:Part 1:1991
BS 8118:Part 2:1991
Structural use of aluminium. Code of dractice for design.

CP 118:1969
Concrete structures
BS 8110-1: 1997
BS 8110-2: 1985
BS 8110-3 1985
Masonry structures
BS 5390: 1976
BS 5628:Part 1:1992
BS 5628:Part 22000
BS 5628Part 3~1985

and rectangular columns
reinforced beams
Code of practice for stone masonry

Code of practice for use of masonry
use of unreinforced masonry.

use of reinforced and prestressed masonry
and components, design and workmanship.
Timber structures
BS 5268-2: 1996
BS 52683:1998
BS 52684. I:1978
BS 5268-4.2:1990
BS 5266-5: I989
BS 5268-6.1:1996
BS 5268-7.1 :1989
BS 5268-7.2:1989
BS 526&7.3:1989
BS 5268-7.43989
BS 5268-751990
0 BSI 2001
Structural use of timber. Code of pracdce for permissiblestress design, materials and
workmanship
Structural use of timber.
trussed rafter roofs
timber structures. Recommendationsfor calculating
Structural we of timber. Fire
fire resistance of timber members
Structural use of timber. Fire resistancb of timber structures. Recommendationsfor calculating
fire resistance of timber
Structural use of Umber.
Structural use of Umber.
storeys
Structural use of timber. Recommend4onsfor the calculation basis for span tables. Domestic
floor joists
Structural use of timber. Recomrnendaltions for the calculation basis for span tables. Joists for
flat roofs
Structural use of timber. Recommendflons for the calculation basis for span tables. Ceiling
joists
structural use of timber. Ceiling binde
Structural use of timber. Recommend$ons for the calculation basis for span tables. Domestic
rafters
Aug-Ol
BS 5268-7.6:1990
BS 5268-7.7:1990
Structural use of timber. Recommendation%For the calculation basis for span tables. Purlins
supporting rafters
Structural use of timber. Recommendations f i r the calculation basis for span tables. Purlins
supporting sheeting or decking

See Eurocodes
Regulatory Body
Department of Transport, Local Government and the Regions
Eland House,
Bressenden Place,
London, SWlE 5DU.
Tel: 020 7944 3000
http:/b~.construction.dtIr.gov.uk/bregs/index.htm
Notes
Building control in the UK is run by Local Authorities who enforce the regulations and give planning permission.
The current building regulations are mandatory however there are plans to relax dtructural design to allow for innovative design.
These plans are in the early discussion phase.
EuropeanTechnicai Approval notified bodies in the UK for construction products
British Board of Agrement (BBA)
PO Box 195, B::cknalls Lane, Garston, Watford, WD2 7NG
Tel: 01923 665306

Fax: 01923 665301
E-mail: rnail@bba.star.co.uk
Website: http://wbw.bbacerts.co.uk
WMLAS Limited
St Poter's House, 6-8 High Street, Iver. Buckinghamshire,SLO 9NG
Tel: 01753 737744

Fax: 01753 792321
E-mail: wirnlas@compuserve.com
EUROCODES UK
EUROCODE 1
DD ENV 1991-1
DD ENV 1991-2-1
DD ENV 1991-2-2
DD ENV 1991-2-3
DD ENV 1991-2-4
DD ENV 1991-3
DD ENV 1991: Basis of design and actions on structures
EUROCODE 2
DD ENV 1992-1-1
DD ENV 1992-1-2
DD ENV 1921-1-3
DD ENV 1992-1-4
DD ENV 1992-1-5
DD ENV 1992-4
DD ENV 1992: Design of concdte structures
EUROCODE 3
DD ENV 1993-1-1
DD ENV 1993-1-2
EUROCODE4
DD ENV 1994-1-1
Design of composite steel and 4oncrete structures
EUROCODE
5
DD ENV 19951-1
DD ENV 19951-2
EUROCODE 6
DD ENV 19961-1
DD ENV 1996-1-2
EUROCODE
7
DD ENV 1997-1
EUROCODE
8
DD ENV 1998-1-1
DD ENV 1998-1-2
DD ENV 1998-1-3
DD ENV i w a i - 4
DD ENV 1998-2
Design provisions for earthquab and geotechnical aspects
9
EUROCODE

No actlon taken
0 BSI 2001


National Application dowment published
National Forward publlshed
National Fomard published
Aug-Ol

I
REST OF THE WORLD
ARGENTINA
No national Building Regulation exists. CIRSOC Codes are mandatory r every national public work. Each Province or municpaiity
has the power to make them mandatorywithin their jurisdiction through eir building code.
The Building code and Town Planning Code from the City of Buenos A
r
i
k is the most used code and is followed by many other
cities.
The following are structural design rules produced for CIRSOC
REGLAMENTOCIRSOC 101
REGLAMENTO CIRSOC 102
RECOMENDACIONCIRSOC
102-1
REGLAMENTO INPRESCIRSOC 103
RECOMENDACIONCIRSOC
105
RECOMENDACIONCIRSOC
106
RECOMENDACIONCIRSOC
107
RECOMENDACIONCIRSOC
201-1
REGLAMENTOClRSOC 202
DlSPOSlClONURSOC 251
Structural loading of buildings

Cargas y sobrecargas gravitatorias era el dlculo de estructurasde edificios Edici6n julio
1982
Wind loading
Acd6n del viento sobre las construcdiones Edici6n Diciembre 1984 (incluye separata con FE
DE ERRATAS 1994)
Actions on structures Wind loading
Acd6n dinemica del viento sobre iaslconstrucdones Edicidn Julio 1982
Seismic constructions
Nonnas Argentinas para las Constru*ones sismorresistentes Edici6n Noviembre 1983
Edicibn Agosto 1991
Ice and snow loading
Accidn de la nieve y del hieio sobre Igs construcciones Edici6n Julio 1982 Actualizaci6n 84
(Fe de erratas)
Combination loading
Superposicidn de acdones combi in+%%^ de estados de carga) Edici6n Julio 1982
Dimensioning of safety co-eflicients
Dimensionamiento del coeficiente da seguridad Edici6n Julio 1982 Actuaiizaci6n 34 (Fe de
erratas)
Atmospheric thenai loading
Acci6n tBrmica climdtica sobre las nstrucciones Edici6n Julio 1982
Calculationand execution of steel re' forced concrete
Proyecto dlculo y ejecucibn de es cturas de hormigdn annado y pretensado Edicidn Julio
1982 Actualizaci6n 1984
Steel for reinforced concrete with Bs I= 500 MN/m3 y Bs = WO MN/m 3
Acero para honnigdnannado con B i = 500 MN/m3 y Bs = 600 MN/m 3 Edid6n Julio 1932
Non-reinforced ocncretefor compact structures Dimensioning, manufacture and quality
Honlg6n liviano de estructura comphcta. Dimensionamiento. elaboraci6n y control Edicidn
Matzo 1985
Partially prestressed concrete
Honnig6n pretensado parcial Ediciqn Enero 1986
Steel for structures of reinfoced conclete test methods and acceptability criteria
Acero para estructuras de honnig6n brmado. MBtodosde ensayo y condidonesde aceptaci6n
Edid6n Julio 1982
Steel structures for building Design calculation, manufacture
Proyecto. dlculo y ejecuci6n de es4cturas de acero para edlficios Edicidn Julio 1982
Actualtzaci6n 1984
RECOMENDACIONClRSOC
301-2
RECOMENDACIONCIRSOC
302 1
RECOMENDACIONClRSOC
303
Light steel structures

Estructuraslivianas de acero EdlciUnAgosto 1991
Welded steel structures
Estructurasde acero soidadas Edic)bn Diciembre 1992
Steel structuresfor antenna
Estructurasde acero para antenas Edidbn Diciembre 1991.
Standards
Loading
IRAM 11602
Actions of snow on buildings
See above
Steel structures
See above
0 BSI 2001
Aug-Ol
Concrete structures
IRAM 11705
IRAM 11706
Reinforced and prestressed concrete silos Design for loading

Reinforced and pre-stressed concrete silos Conditions and requirements for construction
Masonry structures
none
Timber structures
None

Generally foreign codes are not acceptable in Argentina.
Any foreign company involved in design projects. which uses their own niational codes must verify them with
CIRSOC.
Regulatory Body
INSTITUTO NACIONAL DE TECNOLOGIA INDUSTRIAL
CIRSOC Centro Argentino de Investigacibn de 10s Reglamentos Naciondlesde Seguridad para las Obras
Balcarce 186 1" piso Of.138,
(1064) Capital Federal
Argentina
Ing. Marta Parmlgiani
Tel: +54 1 1 4349852OlW24
E-mail: cirsoc@mecon.gov.ar
SNIP 11-7-81
SNIP 22-01-96
SNIP 2.01.15-90
SNIP 2.03.04.84
SNIP 111-24-75
Constructionin seismic areas

Geophysics of dangerous natural influences
Engineeringprotection of territories; buildinga, structuresfrom dangerous geological processes.
Basic design rules.
Design manual for concrete and reinforced cdncrete structures for the use oat high and
extremely high temperatures
Industrialfurnaces and stacks
Standards
Loading
SNIP 2.01.07-85
SNIP 2.02.05-87
SNIP 2.06.04-82
SNIP 2.03.01-87
Loads and efects

Foundations for machinery producing impact oad
Loads and effects arising on hydraulic structu es from Seaway, Ice and Vesseis
'
Load bearing structures and unclosures
SNPA 11-2.02-94
Constructionin seismic areas
Steel structures
SNIP 11-23-81
GOST 23682-79
GOST 2404594
GOST 26047-83
SNIP 111 1875
Steel structures
Steel stepped columns for buildings with general purpose travelling electric cranes having loadcarrying capacity up to 50 1. Specifications
for building. Specifications
Metal structures
GOST 22233-93
GOST 24767-81
SNIP 2.03.0695
Extruded profiles of aluminium

Cold bent profiles of aluminium
Specifications
Aluminium structure designs
Concrete structures
GOST 13015.0-83
SNIP 2.03.01-84
SNIP 2.03.02-86
SNIP 2.03.04-84
SNIP 2.03.0485
Precast concrete structures and members

Concrete and reinforced concrete structures
Dense silicate plain concrete and reinforced ncrete structures
Design manual for concrete and reinforced q c r e t e structures for the use at high and extremely
high temperatures
Asbestos -cement structures
~
Masonry structures
SNPA IV-13.01-96
GOST 24992-81
SNIP 11-22-81
Masonry and reinforced masonry structures

Masonry structures. Method of estimating bonbing strength in masonry
Masonry and reinforced masonry structures '
limber structures
GOST 4981-87
SNIP 11-25-80
Wooden joists
Wood structures

With the exception of a few areas covered by international conventions foreign anb internationalstandards are not recognized and
can not be officially used in Armenia unless adopted by the appropriate authority.
At present Eurocodes are not acceptable in Armenia.
Regulatory Body
Ministry of Urban Development
Government House 3, Republic Square
Yerevan 375010
Tel: +3741 580803. Fax:+ 3742523200
Notes
SNIP documents are building regulations and standards from the former USSR. GbST- standards are from the former USSR.
They continue to be used in Armenia both with and without changes.
0 BSI 2002
July 2002

I
AUSTRALIA
Building Code of Australia 1996
Volume 1: Commercial Buildings
Volume 2: Housing Provisions
Standards
Loading
SAA Loading Code Minimum design loads on structures
(In SAA Rul ST/l) Dead and live load? and load combinations
AS 1170.1-1989
AS 1170.2-1989
Wind loads
Snow loads (indudes supplement)
AS 1170.3-1990
Earthquakeloads (indudes supplemenp)
AS 1170.4-1993
Steel structures
SAA Steel Structures Code
AS 3990: 1993
AS 4100 : 1998
ASlNZS 4600:1996
HB 4 8 1999
Mechanical equipment Steelwork

Steel structures (includes supplement) I
Cold-formed steel structures (inlcudes upplement)
Steel structures design handbook for glneral advice.
SAA Alumlnlum Structures Code
Aluminium structures-limit state
ASMZS 1664.1:1997
Aluminium structures-Allowable
ASMZS 1664.2:1997
(includes supplement)
esign (includes supplement)
Concrete structures
Concrete Structures
AS 3600: 1994
Supplement to AS 3600:
1994
Concrete structures
Concrete structures Commentary
Masonry structures
Masonry Structures
AS 3700: 1988
Masonry in buildings
llmber structures
SAA limber Structures Code
AS 1720.1-1997
Timber structures Design methods
limber structures Tlmber properties
AS 1720.2-1990
National Timber Framing Code
AS 1684-1992
Others
SAA CompositeConstructionCode Composite structures
AS 1562.1-1992
Design and installation of sheet roof a wall cladding-Metal
AS 4040.0-1992
Methods of testing sheet roof and wall adding-Introduction. list of methods and general
requirements
AS 4040.1-1992
Methods of testing sheet roof and wall @adding-Resistanceto concenlrated loads
AS 4040.2-1992
Methods of testing sheet roof and wall hladding-Resistance to wind pressures for noncyclone
regions
SAA Code for Flxed platforms, Walkways, Stairways and Ladders
AS 1657-1992
Fixed plaffonns, walkways, stairways ahd ladders Design, construction and installation
Accesslblilty
AS 1428.1-1998
Design for access and mobility-General requirements for access Building#

BCA is a Performancebased Code which is updated every 6 months.
0 BSI 2001
Aug-Ol
Regulatory Body
Australia:. Building Codes Board
GPO Box 9839
Canberra ACT 2601
Australia
Tel: +11 612 6213 7842
Fax: +11 612 6213 7287
www.abcb.gov.au
The Board was established by means of an inter-governmentagreement signed by the Commonwealth, State and
Territory Ministers responsible for building regulatory matters on 1 March, 1994. The ABCB is responsible for
developing Building Code. Local Councils enforce the Code under Local Government Acts.
Notes
Australian Building System Appraisal Council
Administration Secretariat
CIC MBA VIC
East Melbourne Vic 3000
Australia
Tel: +11 61 3 9411 4511
Fax: +11 61 3 9411 4592
Appraises building products and offers technical opinions regarding compliance with BCA.
The Building Code of Australia 1996 and BCA Standards are available ftom
Standards Australia
PO Box 1055, Strathfield, NSW 2135
Tel: +61 2 9746 4777
Fax: +61 .i900 654 94s
Email: sales@standards.Lrirn.au
AZERBAIJAN
Standards
Loading
SNIP 2.06.04-82
SNIP 2.01.07-85
SN 528-80
GOST 27751-88
Loads and effects arising on hydraulicstructuresfrom Seaway, Ice,and Vessels

Loads and effects
Measurement units for use in the condtruction
Reliability of the constructions and the!foundations.Principle rules of the calculations
SN 429-71
SNIP 11-7-81
Direction for disposition of building objkcts and restriction for building floors in earthquake areas
Construction in seismic areas
Steel structures
SNIP 11-23-81
SNIP 2.04.12-86
SN 527 -80
SNIP 111-18-75
Steel structures
Strength analysis of steel pipelines
Instruction for designing technological:steel pipelines
Metal structures
Concrete structures
SNIP 2.03.01-84
SNIP 2.03.02-86
SNIP 2.06.0685
SN 277-80
SN 52580
SN 529-80
SNIP 2.03.04.84
SNIP 2.06.08-87
it
Concrete and reinforced concrete stru ures

Dense silicate plain concrete and rein rced concrete structures
Concrete and reinforced dams
Instruction for production of light concrkte
Instruction for production of polymerisi g concrete
Instruction for production of solid sili e concret
Design manual for concrete and reinf&ced concrete structures for the use oat high and
Concrete and reinforced concrete strubtures for hydraulic facilities
Masonry structures
SNIP 111-2475
SNIP 11-22-81
SNIP 3.03.01 .-87
RSN 14-90
RSN 20-85
RSNl7-81
RSN 18 -83
Industrial furnaces and stacks

Masonry and reinforced masonry
dimension bricks from limestone usin$ composition KH-3
limber structures
SNIP 11-2580
Wood structures

None
There is discussion towards making Eurocodes and US standards acceptdble in the future
Regulatory Body
Gosstroi AzR 85 Salyn Askarova street, 370002
Baku, Azerbaijan Republic,
Tel: + 99412 95 94 51
F a : + 99412 95 10 60/+ 99412 957412
Notes
SNIP Russian regulations
GOST Russian Standards
RSN National regulations
0 BSI 2002
July 2002
BAHAMAS
Buildings RegulationAct, 1971
Bahamas Building Code Part V Engineeringand Construction Requirewen&
Live and Dead Loads
Chapter 20
Excavations, Footings and Foundations
Chapter 21
Reinforced Concrete
Chapter 22
Chapter 23
Steel and Iron
Chapter 24
Wood
Chapter 25
Aluminium
Chapter 26
Reinforced Gypsum Concrete
Chapter 27
Masonry
Standards
See Building Code

The Bahamas has adopted various standards from the United States and Canada to supplement the Bahamas Building Code.
but not to supercede the specific requirements in its own code.
Regulatory Body
The Ministry of Transport 8 Works
John F Kennedy Drive
PO Box N 8156
Nassau
Bahamas
Tel: +242 322 4830
Fax: +242 326 7907
m a i l : comprm@batelnet.bs
0BSI 2000
Sep-00
BELARUS
1.01.01-97 System of technical normalizationand Standardization in conitructlon. National complex of normative technical
documents. Basic principles
Building regulations of the Republic of Belams
development, mles of registration
1.01.04-99 General manual of quality in construction. The basic rules
1.03.01-99 Technical control in construction. Basic principles
5.01.Ol-99 Soil bases and foundations for buildings and structures
Standards
Foundations
CT6 107697
CT6 1164.0-99
Concrete and reinforced concrete conFtructions for foundations

Soil bases and foundations for buildin s and structures. Quality surveillance and takingover of
works. Kinds of the control and stru ,re controllable parameters
ct$
Loading
rOCT 8829-94
Reinforcedconcrete and prefabricat concrete building products. Loading test methods.

Assessment of strength, rigidity a n d s c k resistance
CT6 21.302-99
CT6 21.303-99
requirements of documents
steel Structure8
CT6 4.253-96
rOCT 2404594
TOCT 3024594
CT6 4.221-96
rOCT 22233-93
Quality rating system. Building. Alumi ium Structures

Extruded Sections From Aluminum Alkys For Enclosure Building Structures. General
specifications
Concrete structures
CT6 1178-99
CT6 118599
CT6 1110-98
rOCT 10060.4-95
rOCT 22904-93
TOCT 30062-93
Reinforcedconcrete columns for build ngs and structures. General specifications

Exterior concrete and reinforced conc ,ete panels for buildings and structures. General
specification.
Formwork To Raise Cast-In-Place Cohcrete And Ferroconcrete Constructions. General
specifications
Concretes. Strucfure-mechanicalrapi method for the determination of fmst-reslstance
Reinforcedconcrete structures. Magn tic method of the determination of the thickness of
concrete protection layer and the loca 'on of reinforcement
Reinforcement for reinforced concrete,structures. Eddy current method of strength properties
controi
Masonry structures
None reported
limber structures
CT6 1074-97
CT6 4.208-95
Profiled Details From Wood And WO

Productquality index system. BuildiJ
Nomenclature of indices
Materials For Residential Building. Spedfications

Wooden Laminated Structures And Details.

Regulatory Body
Ministry of Architecture and Constructionof Republic of Beiarus
220048 Minsk
Miassnikova Street, 39
Notes
Construction technical documents and Standards are controlled
by
Strojtechprom
220002 Mlnsk
Kropotkin Street 89
0 BSI 2001
Tel: + 75 17 8 017 227 29 54

Fax: 375 17 220 38 33
Tel: + 75 17 8 017 283 26 19

Fax: $I75 17 28 61 21
CT6: belarussian national Standard
TOCT: GOST (Russian) Standard
Feb-Ol
BERMUDA
Bermuda Building Code 1998 made up of :The Bermuda Commercial Building Code 1998
The Bermuda Residential Building Code 1998
The Bermuda Mechanical Code 1998
The Bermuda Electric Code 1998
Standards
Sbuctural Design
BOCA Ch 5
BOCA Ch 6
General building limitations

Types of construction
BOCA Ch 15
BOCA Ch 16
BOCA Ch 17
BOCA Ch 18
BOCA Ch 19
B O W Ch 20
BOCA Ch 21
BOCA Ch 22
BOCA Ch 23
BOCA Ch 31
BOCA Ch 34
Roofs and roof structures

Structural Loads
Structural Tests and Inspections
Foundations and Retaining walls
Concrete
Lightweight metals
Masonry
Steel
wood
Special construction
Existing structures

BOCA* National Building Code 1996
International Mechanical Code 1996
National Electrical Code 1996
Regulatory Body
Departmentof Planning
30 Parliament Street
Hamilton HM 12
Fax:
297 7756
297 7755
297 7828
297 7634
295 4100
Notes
Building Officials and Code Administrators International Inc
4051W Flossmoor Road

Country Club Hills
Illinois 604785795
Tel: 70W99 2300
Departmentof Health
Old Hospital Building
2"6Floor, 7 Point Finger Road
Paget DV 04
General EnquiriedHealth and Plumbing
236 0224
Inspections:
FaX:
236 4006
0 BSI 2000
Sep-00
BSI International Suwey
BOSNIA HERZEGOVINA
Regulations on quality of weldings for steel constructionsupports (Official'JournalSFRJ 41/64)
Regulation on tolerances of measures and shapes of steel structure supp rts (Official Jopurnal SFRJ 41/64)
Regulation on quality of concrete construction supports (OfficialJournal S RJ 11/87)
Regulations on normative for concrete and precast concrete structure sup rts (Official Journal SFRJ 51/71,15/77)
Regulation on normative for design concrete and precast structure (Offici41Journal 35/70)
Regulation on technik normative for walls (Official Journal 17/70)
Regulation on mandatory certification for facing bricks and clay blocks
Journal SFRJ 24/90)
RegulaUon on mandatory certification clay tiles (Official Journal SFRJ
Standards
Loading
JUS U.C7.110
JUS U.C7.111
JUS U.C7 112
JUS U.C7 113
JUS U.C7 121
JUS U.C7 122
JUS U.C7 123
Bases for design of structures Wind lbads on structures. General principles and the mean
aerodynamic wind pressure
Bases for design of structures Wind {bads on structures Dynamic factor and aerodynamic
wind pressure
Bases for design of structures Wind I ads on structures Wind load on buildings
Bases for design of structures Wind I ads on structures Wind loads on other structures
I
to use and occupancy in residential and public
Bases for design of structures LoadS,due
buildings
Bases for design of structures DeteTination of imposed floor loads in production buildings and
warehouses
Bases for design of structures Adion;due to selfweight of structures non-structural elements
and stored materials used in stuctural besign Density
Information unavailable
Steel structures
JUS U.E7.081
JUS U.E7.086
JUS U.E7.091
JUS UE7.096
JUS U.E7.101
JUS U.E'I.111
JUS U.E7.121
Stability of steel constructions

section
stability of steel constructions
- Axial compressionedsingle members of constant cross

- Effecti e lengths of cornpression members
- Axial1 , compressioned bullt-up steel members of constant cross
- Bend1 g and compression

- Latera buckling of girders
- Stabili of compresslonedmembers in frames
- Buckli g of plates
Concrete structures
JUS U.E3.050
JUS U.Ml.046
JUS U.Ml.047
Prefabricatedconcrete units. Techniql requirements for manufacture and mounting

Testing of bridges with test load
Load test and break test for the buildiig constructions
Masonry structures
JUS U.Nl.100
Timber structures
JUS U.Cg.200
JUS U.C9.200/1
JUS U.Cg.300
Prefabricated elements for buildings

ncrete hollow building blocks Technical requirements
for buildlng blocks Technical require ents and test methods
Structural timber design Solid timber construction and fibre building boards construction
Structural timber design Solid timber nstruction and fibre building boards construction
amendments
Structural timber design glued lamin$ted members -Technical requirements

Eurocodes are not currently acceptable.
Regulatory Body
Information unavailable
Notes
0 BSI 2000
Sep-00
BRAZIL
ABNT AssociaCgo Brasileira de Normas Tknicas I CB-02 Comit6 Brasil& da ConstruMo Civil
Brazilian Association for Technical Standards I Brazilian Comittee for Civll Construction
Standards
Loading
NBR 8681:1984
NBR 8044:1983
NBR 6120:1978
NBR 71W.1982
NBR 71891983
NBR 6123:1987
NBR 116821991
NBR 97823985
Loading and safety on structures

Geotechnical Project
Moveable loads for
Wind loads in buildings
Stability of slopes Procedure
Loadingfor dock works, marines and Auvial structures
None
St-1
StrUdUreS
NBR 8800:1986
NB 143:1967
Concrete structures
NBR 61 182000
NBR 9062:1985
NBR 6122: 1996
Timber structures
NBR 7190:1994
NBR 5629:1996
NBR 10837:1989
NBR 71971989
Design and construction of steel stru ures for buildings Limit states method
Design of steel structures formed by %Id laminated profile Limit sates method'
Part 1 Design and Part 2

Design and construction of
Design and construction of
) concrete
Design and constructionfor timber strbctures
Ties anchored in soils - Procedure
- Limit states method - Tests methods included
Design of structural masonry walls wi concrete blocks

Design of pre stressed concrete stru$res

None. Although US codes have been influential in the Brazillan codes.
Regulatory Body
AssodaHo Brasileira de Normas T h i c a s (ABNT)
Avenida Treze de Maio. 13,
2 P andar Centro
CEP: 20003 900 Rio de Janeiro RJ
Tel: +55 21 210-3122

Fax.: +55 21 220-1762
http$www.abntorg.br
Notes
Planning is ruled by the MunicipalityCodes, and by the CREA (Regional Tuncil for Engineers and Architects)
Product approval is by those OCC ( Organism0 Credenciado para CertifidHo ) named by the government under certain rules.
' Revision NB 143:2000 in circulation for public consultation

a Now under discussion at the committee level
0 BSI 2000
Sep-00
BULGARIA
Law on Territorial and Settlement Structure
Technical Normative Order on Designing, Performingand Inspectingof Qnstruction and Installation Activities
Directive 89/1OWEEC Construction Products Directive
Standards
Foundations
1996
1996
W C 1018882
t;llC 676-85
W C 3214-86
1993
W C 2419-74
1986
W C 2762-83
6AC 9075-89
1990
Loading
1989
SAC 14784: 1979
1989
Masonry structures
1998
Ordinance 1/96 for designing flat fountlation

Norms for designing flat foundations.
Soil mechanics. Method for laboratorydetermination of shear resistance. unconfined test
,
Constructionalsoil. Classification
Construction soils. Physical propertie4 Definitionand symbols
Norms for designing pile foundations 1
I
--
effect. Basic terms. Classificationoft$ aggressive mehia

Norms for designing supportlngwalls '
Norms for design of buildings and equipment In earthquake zones

Norms for designing of masonry structures
steel StNCtUl'eS
1987
W C 163%: 1986
1990
Concrete structures
1999
W C 15559: 1982
1990
SAC 10038-72
Tlmber structures
1990
6AC 16333-86
Norms for designing of steel constru ons

Steel construction General principl for calculation
Norms for designing steel constructiorlsfrom tinesectlon steel profiles
Norms for designing of concrete and r 'nforced concrete structures

Concrete and reinforced concrete s h res. Base for design
Concrete and reinforced concrete stru res, intended for work under impact on raised and high
temperatures
Crushed additive materials for fire resktant concrete
Norms for designing on timber structutes
Aluminium constructions general pritjciples for calculation

Eurocodes are acceptable In Bulgaria.
Their implementationand translation into Bulgarian is currently underway.
Regulatory Body
Ministry of Territorial Developmentand Public Works
1000 Sofia
17-19. Kiril I Metody Str.
Notes
Design and construction control Is carried out by
National Construction Control Directorate within the Ministry of Territorial tbveloprnent and Public Works
1WO Sofia
47, Christ0 Botev Blvd
The establishment of Notified Bodies for Conformity Assessment of cons ction products is underway.
Construction products conformingto existing Bulgarian standard are ass$ by accredited Bularian laboratories.
Their upgrading and harmonizationis forthcoming.
0 BSI 2000
Sep-00
CANADA
National Building Code of Canada 1995.
(a) Part 1 Scope and Definitions;
(b) Part 2 General Requirements;
(c) Part 3 Fire Protection, Occupant Safely and Accessibility;
(d) Part 4 Structural Design;
(e) Part 5 EnvironmentalSeparation:
(9 Part 6 Heating, Ventilating and Air-Conditioning;
(9) Part 7 Plumbing Services;
(h) Part 8 Safely Measures at Construction and Demolition Sites;
(I) Part 9 Housing and Small Buildings.
Part 4 Structural Deslgn

Structural Loads and Procedures.
General
Specified Loads and Effects
Limit States Design
Working Stress Design
Dead Load
Live Loads Due to Use and Occupanuy
Live Loads due to Snow, Ice and Rain
Live Loads due to Wind
Live Loads due to Earthquakes
Other Effects
Foundations
General
Subsurface Investigations, Drawings end Reviews
Materials Used in Foundations
Design Requirements
Excavations
Shallow Foundations
Deep Foundations
Special Foundations
Design Requirements for Structural Materials
Wood
Plain & Reinforced Masonry
Plain, Reinforced and PrestressedCancrete
Steel
Aluminium
Glass
Design requirementsfor Special Struutures
Air-Supported Structures
Parking Structures
Section 4.1
Section 4.1.1
Section 4.1.2
Section 4.1.3
Section 4.1.4
Section 4.1.5
Section 4.1.6
Section 4.1.7
Section 4.1.8
Section 4.1.9
Section 4.1.10
Section 4.2
Section 4.2.1
Section 4.2.2
Section 4.2.3
Section 4.2.4
Section 4.2.5
Section 4.2.6
Section 4.2.7
Section 4.2.8
Section 4.3
Section 4.3.1
Section 4.3.2
Section 4.3.3
Section 4.3.4
Section 4.3.5
Section 4.3.6
Section 4.4
Section 4.4.1
Section 4.4.2
Standards
Hlghway Bridges
CANlCSA S6-88
CANICSA S6Sl 1990
S6.1-M1990
s-1
Design of highway bridges
standard CANICSA S6-88
StNdUreS
CANICSASI6-1-94
PLUS 4001-95
Limit state design of steel structures

ASTM Specifications for steel: ASTM Standards referenced in CSA's CAN/CSA-S16.1-94
Concrete structures
A23.3-94
CANlCSAS269.3-M92 (Rl998)
A23.1-941A23.2-94
PLUS 4002-95
CANSA43SM84 (Rl996)

Concrete formwork
Concrete materials and methods of ncrete constructiodmethods of test for concrete
ASTM specifications for concrete and concrete structures design: ASTM standards referenced in
CSA'S A23.1lA23.2-94
Concrete construction for housing and small buildings
llmber structures
086.1-94
086.lSl-98
Engineering design in wood (Limit states design)

Supplement to 086.1-94
Masonry structures
CAN343WM84 (R1997)
A82.4lA82.51A82.6-M 1978
A371-94
0 BSI 2001
Masonry design for buildings (a:l8)

Structural clay load-bearing wall tilelSbucturalclay non-load-bearing tilelStandard method for
sampling and testing structural clay tile
Masonry construction for buildings
Aug-Ol
Strength design in aluminium (e:5)
CAN341 57-M83

None known
Regulatory Body
Institute for Research in Construction
National Research Council of Canada
Ottawa, Ontario, K1A OR6
Tel.: (613) 993-2607
Fax: (613) 952-7673
Notes
The design and construction of every building shall meet the standards set out in !Parts 3 to 9 of the National Building Code.
Tile provinces have the authority to regulate building construction. However mos provinces use the National Building Code as a
base document in developing provincial building codes. In this way the Building cI
! des across Canada are kept relatively similar in
nature.
A number of organizations, such as CSA', CGA (Certified General Accountants ssociation of Canada) and ULC (Underwriters'
Laboratories of Canada), provide full third-party certification for safety-related pro ucts or systems The NBC does not require full
third-party certification, only that the product or system meets certain minimum re, uirements. Code enforcement officials often rely
on certificationas a guarantee that such is the case.
To provide tbe construction industry with a national evaluation service for innovative materials, products and systems, NRC created
the Canadian Construction Materials Centre.
This service includes the evaluation of new and innovative products for which no btandards exist, and of products where standards
exist but for which no third-party certification program has been established. Mosl provinces and territories use the Centre's
evaluatiorl reports iis a basis for accepting new products
'2SA Internaiional (Canadian Standards Association)
178 Rexdale Boulevard
Torontc. ON
M9W 1H3, CANAGA
Tel: (416) 747-4000 U
Toll Free 1-800-463-6721(US. 8 Canada only)
Fax: (416) 747-4149
General Inquiries Information Centre
Tel: (416) 747-4058
E-maii: infoacsa-international.org
The National Building Code is adopted in the following Provincesmerrit0ries:Yukon, Northwest Territories, Nunavut, Saskatchewan, Manitoba, Nova Scotia, Alberta (some additions), British Columbia (some
additions), Quebec (some additions), Prince Edward Island (major municipalities qdopt the NBC), Newfoundland (municipalities
adopt the NBC), Labrador (municipalities adopt the NBC)
ALBERTA CANADA
9
Alberta Building Code 1997 Part 4 Structural Design

Building Code Regulation 50198
Alberta has adopted the National Building Code 1995 with some addition$
Standards
Steel structures
CANICSA-SIG-1-94
PLUS 4001-95
CSA Sl36-94

ASTM SpeciRcationsfor steel: ASTM ktandards referenced in CSA's CAN/csA-S16.1-94
Cold formed steel structural membed
Concrete Structures
CSA A23.3-94
CANICSAS269.3M92 (R1998)
A23.1-941A23.2-94
PLUS 4002-95
CAN3-A438-M84 (Rl996)

Concrete formwork
Concrete materials and methods of ncrete construction/methods of test for concrete
ASTM specifications for concrete and concrete structures design: ASTM standards referenced in
CSA'S A23.11A23.2-94
Concrete construction for housing and small buildings
limber Structures
CANICSA 086.1-94
086.1 S i-98
CAWCSA 0 177-M89
Engineeringdesign in wood (Limit s t a b design)

Qualification Code for manufacturers of structural glued laminated timber
Masonry Structures
CANS304-M84 (R1997)
CSA S 304.1M84 (Rl994)
A82.4lA82.5lA82.6Ml978
A371-94
Masonry design for buildings (a:l8)

Masonry design for buildings (Limit S tes Design)
Structural clay load-bearing wall tile/S ctural clay non-load-bearingUldStandard method for
Aluminlum Structures
C A N S 157-M83
Strength design in aluminium ( e 3
Glass
CANICGSB 12.20-M89
Structural design of glass for buildings
Air Supported Structures

CAN3 S367-M81
Air supported structures
Parklng Structures
CSA s413-94
Parking structures

None
Regulatory Body
Alberta Municipal Affairs
Safety Services, Building and Fire Safety
705-10808-99 Avenue
Edmonton, Alberta T5K 0 6 5
Canada
Notes
The owner of the building is required to provide written assurances beford construction starts that the appropriate professionals
have been retained for the design and site review of the project.
and erectors
The Alberta Regulation AR 201191 Building Permit (Consolidated up to 3W93) is in place for permit Issuance outside authorized
municipalities.
Alberta Building Code is available from:
Learning Resources Distributing Centre
12360 142 Street, Edmonton, Alberta, T5L 4x9
Tel: (780) 427-5775. Fax: (780) 422-9750
It is also available on CD ROM format through the National Research Council on: 1-800-872-7990
0 BSI 2001
Aug-Ql
kEW BRUNSWICK CANADA

The National Building Code of Canada 1995 is adopted by some municipalities
Standards
Steel Structures
CANlCSA-SlG-1-94
PLUS 4001-95

ASTM Specifications for steel: ASTM $tandards referenced in CSAs CANICSA-Sl6.1-94
Concrete structures
A23.3-94
CNCSAS269.3-M92 (Rl998)
A23.1-941A23.2-94
PLUS 4002-95
CAN3-A438-M84 (Rl996)

Concrete form work
Concrete materials and methods of co Crete constructiodmethodsof test for concrete
ASTM specifications for concrete and ncrete structures design: ASTM standards referenced in
CSAS A23.1lA23.2-94
Concrete construction for housing and1small buildings
Timber structures
086.1-94
086.1 S i-98
Engineering design in wood (Limit stab design)

Masonry structures
CAN3-SSM84 (R1997)
A82.4lA82.5lA82.641978
-71-94
Masonry design for buildings (a:18)

Structural clay load-bearing wall tilelshctural clay non-load-bearingtilelstandardmethod for
Aluminlum Structures
CANS157-M83
Strength design in aluminium (e:5)

NBC of Canada is a performance based code
Regulatory Body
Departmentof Munidpallties and Housing
PO Box 6000
Frederlcton
New Brunswick
E3B 5H1
Canada
Notes
Permits are issued by Inspectorsappointed by the Departmentof Munidpflities and Housing (see above)
Transportation.
For a copy of the Provincial Building Regulation contact:
Centennial Building Room 115
P.O. Box 6000
Fredericton, N.B.
E3B 5Hl
(506) 453-2520 Fax: (506) 3457899
0 BSI 2001
Aug-Ol
CHINA
The compulsory provisions of engineering Construction Standards2000: building Construction
Standards
Loading
GB50009-2002
Loading code for design of building strbctures
6850223-95
GB50011-2001
GB50023-95
685117-88
6850191-93
JGJl16-98
CECS126:2001
Standard for classification of seismic drotection of buildings

Code for seismic design of building
Standard for earthquake-resistanteva ation of buildings
Standard for earthquake-resistant eva ation of industrial constructional structures
Code for design of earthquake-resista t of structural construction
Technical specification for
bearing isolators
Steel structures
GB50017-2002
GB5OOl8-2002
JGJ99-98
JGJ7-91
JGJ 138:200 1
CECSl02:98
CECS77:96
JGJ138:2001
Code for design of steel structures

Technical code for design of cold-form: d thin-wall steel structures
Technical specification for steel struct re of tall buildings
Technical specification for trussed str tures
Technical specification for steel reinfo d concrete composite structures
Technical specification for steel struct re of light-weight buildings with gables frames
Technical code for strengthening steel structures
Technical specification for steel reinfobd concrete composite structures
None
Concrete structures
GB50010-2002
68577-85
GBJl30-90
JGJ3-91
JGJl2-99
JGJlT21-93
JGJlT22-98
JGJfl92-93
JGJ95-95
CECS26:90
CECS28:90
CECS38:92
CECS39:92
CECS5l:93
CECS52:93
CECS58:W
CECS88:97
CECSlO4:98
CECS25:90
Code for design of concrete structureq

Code for design of reinforced concretd silos
Technical code for reinforced concret life-slab structure
Technical specification for reinforced ncrete structure of tall buildings
Specification for design of light weight aggregate concrete structures
Technical specification for V-style re-c wed roof cover
Specification for design of reinforced ncrete shall structures
Technical specification for concrete s ctures pre-stressed with unbounded tendons
Technical specification for concrete s ctures with cold-rolled ribbed steel wires and bars
Technical specification for Reinforced ncrete with coupled steel bars
Technical specification for concrete-fill d steel tubular structures
Technical specification for steel fiber r inforced concrete structures
Specification for design of reinforced ncrete deep beams
Specification for design of reinforced Wncrete continuous beams and frams considering
redistribution of internal forces
Technical specification for column-slat) building assembled by monolithic prestressing
Specification for design of
II
Masonry structures
GB50003-88
JGJ5-80
JGJlT14-95
JGJl37-2001
CECS08:89
CECS20:90
Code for design of masonry structures'

Technical specification for middle-size block buildings
Technical specification for small-sized hollow concrete masonry buildings
Technical code for perforated brick m sonry structures
Technical code for brick silos
Technical specification for masonry c&structed of autoclaved sand-lime bricks
4"
Timber structures
GB50005-2002
Code for design of timber structures

None reported
0 BSI 2002
July 2002
Regulatory Body
Departmentof Standards and Norms
Ministry of Construction
9#, Sanlihe road
Beijing, 100835
Tel:86-I 0-68393043168394385
http1hww.cecs.org.m
Notes
China Association for EngineeringConstruction Standardization(CECS)
9#, Sanlihe road
Beijing, 100835
Tel. 8810-68394012
http1hww.cecs.org.cn
0 BSI 2002
July 2002
CROATIA
Zakon o gradnji ("Narodne novine" br. 52/99, 75/99. 117101)
The Building Act (Official Gazette No. 52/99, No. 75/99)
Bases for Design of structures

Official Gazette 15/90
Regulations for technical normative fqr foundation of buildings

Regulations for technical normative fdr design and constructions of final works in buildings
Official Gazette 3/81,49/82.

29/83, 20/88, 52/90
Technical regulationsfor high-rise building construction in the seismic fields

Regulations for technical normative on loading of structures
Concrete structures
Regulations for technical normative f r concrete and reinforced concrete

Regulations for technical normativeslor design and constructing from processed elements from

Official Joumal No. 15/90
Regulations on the technical requirements of lightweight aggregate concrete and lightweight

aggregate reinforced concrete.
Steel structures.

Official Journal No 61/86
Regulations for technical normative f r structural steel work

Regulationson the technical require ents of bearing steel constructions
Official Journal No. 41/85. 20/88
Regulations on the technical requirenlentsof steel wires, rods and ropes intended for the
prestressingof constructions.
Standards
all of the above mentioned regulations are connected with the old JUS standards; these are
available in the State Office for Standbrdisation and Metrology

Although many of the old JUS standards are being withdrawn and replawd with European standards (where such exist), they
remain integrated as a part of the above mentioned regulations;
Foreign standards are acceptable (but not recommended) if the design 01 the structure is made in accordance with the essential
requirements (six essential requirements from the 89/106/EEC Directive), and at least on the security level regulated with the above
mentioned regulations
Regulatory Body
Ministry of EnvironmentalProtectionand Physical Planning
Building Division
Ulica RepublikeAustrije br. 20
HR-10000 Zagreb
Croatia
Tel: +385 1 37 82 145
Fax:
+385 1 37 82 466
E-mail: graditeljstvo@mzopu.hr
www.mzopu. hr
Notes
Mandatory testing required for
1. Fractionatedstone aggregate for concrete and asphalt,
2. Cement,
3. Fapde bricks and clay blocks,
4. Clay roofing tiles,
5. Concrete aggregates,
6. Hydro insulating materials impregnated with bitumen,
7. Pre-manufactured elements of comb concrete,
8. Concrete tubes for sewage
0 BSI 2002
July 2002
CYPRUS
The Streets and Building Law Chapter 96 Law no 14 of 1959 as well ag the relevant Streets and Buildings Regulations and their
amendments thereafter:
Standards
Concrete Structures
Gout Gazette No 2750 KDP
277192
Gout Gazette No 2867 KDP
54194
Official Gazette No 2760,
23.12.92 304192
Official Gazette No 2194,
27.12.86 284186
Seismic Code for reinforced concrete ktructures

Code for concrete structures (CYS 15p: Part 1 8 2) and CYS 13 on concrete technology
Ready mixed concrete (CYS 111)
Concrete aggregates (CYS 64)
Steel structures
No standards at present
Masonry structures
limber structures
Loading
Established speed of win(- .Jading .- 120 Km per
DUr

British, European and American Standards are acceptable
Regulatory Body
Ministry of Interior
DSeverisAve.
Nicosia, Cyprus
Notes
Established speed of wind loading is 120 Km per hour
No attestation of conformity for CE marking can be canied out at present as no Approval testing Institutions exist.
Competent authoritles:
Materials Laboratory of Ministry of Communications and Works
1483 Nicosia
Cyprus
Mines Services
1422 Nicosia
Cyprus
0 BSI 2001
Aug-Ol
CZECH REPUBLIC
Act No 50111976 Col1on Town 8 Country Planning and on Building Reguldtions (The Building Act)
Decree No 13111998 Col1on Non-Statutory Planning Materials and Plannipg Documentation
Decree No. 13Z1998 Col1 on Detailed Specification of Same Building Act Ftipulations
Decree No 137/1998 Col1 on General TechnicalConstructionrequirement$
Decree No 17411994 Col1on General Technical Requirements Ensuring de Use of Constructions by Persons with Limited Ability of
Movement
Standards
Structural Codes
CSN 73 0031: 1990
CSN 73 0032 : 1978
CSN 73 0035 : 1988
CSN 73 0037 : 1992
CSN 73 0038 : 1987
CSN 73 0040 : 1996
CSN 73 1000 : 1989
Loading
CSN 73 0033 : 1991
CSN 73 0036 :1975
Concrete Structures
CSN 73 1205 : 1982
CSN 73 1201 : 1988
CSN 73 1203 : 1992
CSN 73 1204
Steel Structures
CSN 73 1206 : 1986
CSN 73 1401 : 1995
CSN 73 1402: 1988
CSN 73 1403 :1990
CSN 73 1404 : 1987
CSN 73 1408 : 1989
CSN 73 1500 : 1986
Stone Structures
CSN 73 3251 : 1987
CSN 73 1101 : 1981
wood StNdUreS
CSN 73 1701 : 1984
CSN 73 1590 1986
Basic specifications for calculation Reliabilityof building constructions and foundation soils.
Calculation of building structures load& by dynamic effect of machines
Actions on buildingstmctures
Earth pressure acting on structures
Design and assessment of building s ctures subjected to reconstruction
Loads of technical structuresby techn Iseisrnicity
Foundation of buildings and structure asic design requirements
Basic regulations for loadingand effects Reliability of building structures and foundation soils.
Seismic loads of buildings.
Basic requirements for the design Concrete structures
Design of lightweightaggregate concrete structures
Design of concrete two-way slabs
Composite steel-concrete structuresBbsic design requirements
Design of light gauge cold-formed pro les in steel structures
Designing of hollow sections In steel s&ctures
Design of steel structures of hydraulic pmitructions
Design of steel structures of Industrialbridges
Steel structures Basic requirementsfor calculation
Design of structures of stone
Design of wood structures

StructuralEurocodes
Regulatory Body
Ministry for Regional Development
Department of European and International Law
Staromestske namesti 6
CZ-110 15 Praha 1
Tel: 4 2 0 2 248 61260
F a : 4 2 0 2 248 62374
0BSI 2001
Approtal for materials is carried out by:
CSNl
Tel:O )21802111
Fax: ( 2) 21 802 301
E-mail info@csni.a
Feb-Ol
ESTONIA
There is no complete Estonian Building Code at this time
Standards
Estonian Design N o m (EPN) have been elaborated on the basis of Eurocodes,but deviate from these due to local conditions.
Loading
EPN 1.1.1
EPN 1.2.1
EPN 1.2.3
EPN 1.3.4
EPN 1.2.5
EPN 1.2.6
EPN 1.2.7
EPN 1.3
EPN 1.4
Basis of design
Loads. Introduction (draft)
Construction loads (draft exposed to sbjections)
Imposed loads
Snow load (draft)
Wind loads (draft exposed to objectioms)
Loads in case of fire (draft)
Traffic loads on bridges (draft)
Actions in silos and tanks (draft)
No any regulations
Steel structures
EPN 3.1.1
EPN 3.1.2
EPN 3.1.3
EPN 3.1.4
EPN 3.1.5
EPN 3.4.2
Steel structures. Design of buildings.

Steel Structures. Resistance to fire (d ft)
Design of cold formed steel sbuctur (draft)
Design of stainless steel structures (d ft)
Supplementary requirements for desi n of steel plane plates, having no loads crossing the
surface of a plate (draft)
Liquid retaining steel Structures (draft)
Concrete structures
EPN 2.1.t
EPN 2.1.3
Concrete structures. General guidelin ' and guidelines for design of buildings (draft)
General guidelines for design of p r stJ concrete structures (draft)
Masonry structures
EPN 6.1.1
Masonry structures. General guidehe and guidelines for design of buildings (draft)
limber structures
EPN 5.1.1
EPN 5.2
Timber structures. General guidelinesland guidelines for design of buildings (draft)

Timber bridges (draft)

Unless there is an appropriate Estonian building regulation, the former Sopiet Union's appropriate regulation that was valid on the
01.01.1991 is acceptable.
responsibility, prove compliance with the planning and
The licensed design enterprises are allowed to ignore
erein they are allowed to use any available national or
building law and have approval of appropriate (mostly
international code
Notes
The following products require masndatory assessment of conformity:
Precast concrete products
Concrete and mortars
Cement
Aggregates for concrete and mortar
Reinforcement steel
Masonry products:- calcium silicate bricks; clay bricks; concrete blocks anti bricks; AAC blocks; LWC blocks: intels:
Thermal insulating products
Roof coverings
Approval Body:
Tallinn Technical University;
Centre 'EhltusTEST";
GqUfication Bureau of Technical Research Centre of Rescue Board (safety in case of fire):
OU 'Kserteks" (thermal insulating products)
0 BSI 2000
Sep-00
EGYPT
Egyptian Code to calculate the loads and forces for structure and buldinglworks 1999
Building Code Part 7 1996 The resistance of bearing wails buildings to ea quakes
Egyptian code for basics of design and constructionfor steel structure 1
Egyptian Code of practicefor reinforced concrete structures 1999
Ro& foundation code
Egyptian Code for soil mechanics and basics of constructionfor foundations 1999
Building requirements code for the handicapped 1999
Standards
Loading
Egyptian code of loads and forces 1999
None
steel structures
Egyptian code for design and constructionof steel structure 1999
Alumlnium structures
None
Concrete structures
Egyptian code of prachiefor reinforced and prestressed
concrete strudures 2001
Masonry S t N d U r e S
Egyptian code of masonry structures 2001
Tlmber structures
None
Other
code of foundation and soil mechanics 1999

American and British for items not induded in Egyptian code and standards
Regulatory Body
Ministw of Housina. Utilities 8 Urban Communitlea
Housing8 Buildlng.ResearchCentre
87 El-Tahreer S t Dokki Gta
PO Bo 1770
Tel: +20 3356 722 7617107 7617092

Fax: +20 3351 564
m a i l : hbrc@idsd.gov.eg
e
0 BSI 2002
Jan-2002
FIJI
National Building Code 1990
Standards
Loading
FJS A S 1170.1: 1998
FJS AS 1170-2: 1998
loads and load combinations
Minimum design loads on structures.

FJS ASS 1170.4: 1998
FJS ASS 1170.4 Supp 1: 1998

StWi StNctUreS
Based on the New Zealand standards
FJS ASMZS 1664.1: 1998
FJS A W S 1664.1 Supp 1:
1998
FJS ASINAS 1664-2: 1998
FJS AWNAS 1664-2 Supp 1:
1998
1-
Aluminium structures Limit state desi n

Aluminium structures Limit state desi n Commentary
Aluminium structures - Allowable
Aluminium structures -Allowable
Concrete structures
Based on Australian Standards
Masonry structures
Timber structures

Australian and New Zealand Standards
Regulatory Body
Ministry for Health
PO Box 2223
Suva
Fijl Islands
Tel: +679 306177
Fax: +679 306177
Notes
Trade Standards and Quality Control OfAce
PO Box 2118 Govt Buildings
9 Goodenough S h e
Suva
Fiji Islands
Tel: +679 305 411
Fax: +679 302 617
Fiji Standards relating to buildlng materials are adopted from AusWlIadNew Zealand Standards.
0 BSI 2001
Aug-Ol
The Standards listed are mandatory
Standards
Loading
SNiP 2.01.07-85
GOST 27751-88
Loads and effects

Reliability of the constructions and the'foundations. Principal rules of the calculations
SNIP 11-7-61
Steel structures
SNIP 11-23-81
SNIP 111-16-75
Steel structures
Metal structures
SNIP 2.04.12-86
SN 527-80
Strength Analysis of Steel Pipelines

Specificationsfor the designing steel dipelines P maxlO M Pa
SNIP 2.03.06-85
Concrete structures
SNiP 2.03.01-84
SNiP 2.03.02-86
SNIP 2-03-03-85
SNIP 2.03.04-84
SNiP 2-06-0647
SNIP 3.09.01-85
SNIP 111-1880
SN 27780
SN 52480
GOST 25192-82
GOST 1409845
Concrete and reinforced concrete stru res

Dense silicate plain concrete and rein&ed concrete structures
Wire fabric reinforced concrete
Design manual for concrete and reinfokcedconcrete structures for the use at high and extremely
high temperatures
Concrete and reinforced concrete stru res for hydraulic structures
Fabrication of Precast Reinforced Con ete Structures
Composite steel and reinforced wncr te structures. Requirementsfor design and inspection.
Fabrication Guidelines to Cellular Con rete
Guidelines for Fabrication and Use of f High-Density Silicate Concrete
Concretes. Classification and general echnicai requirements
Welded joints of reinforcementand in rts for reinforced concrete structures -Types. designs,
dimensions
Masonry structures
SNIP 11-22-81
SNIP 111-24-75
SNIP 3.03.01-87
Masonry and reinforced masonry strucjtures

LoadbearingStructures and Enclosurb
Timber structures
SNiP 11-2580
Wood structures

Foreign Standards are not acceptable
Regulatory Body
State Architecture and Construction Inspectorate
Vadza Pshavela Aave 16
Tbilisl
Georgia 380060
a
0 BSI 2001
Aug-Ol
HONG KONG
Law of Hong Kong Chapter 123 Buildings Ordinance
Building (Administration) Regulations
Building (Construction) Regulations
Building (DemolitionWorks) Regulations
Building (Planning) Regulations
Building (Private Streets and Access Roads) Regulations
Building (Refuse Storage Chambers and Chutes) Regulations
Building (Standards of Sanitary Fitments, Plumbing, Drainage Works and Latrines) Regulations
Building Wentilating Systems) Regulations
Building (Oil Storage Installations)Regulations
Building (Enew Efficiency) Regulations
Building (Appeal) Regulations
Technical Memorandumfor Supervision Plans
Standards
Loadlng
Covered by Building (Construction) Regulations

Also see Code of Practice on Wind Effects Hong Kong 1983
Building (Construction)
Regulations do not have
provisions on seismic design
Steel structures
Code of Practice for the Structural use of Steel 1987
Code of Practice for Fire Resisting Construction 1996
No local codes of practice
Concrete structures
Code of Practice for the Structural use of Concrete 1987
Code of Practice for Fire Resisting Construction 1996
Masonry structures
Timber structures
The Building Regulations do not specify any Standards. Designs may be qpproved if they can be shown to achieve the
required performance criteria set out in the Building Regulations
In the majority of cases building structures of reinforced concrete or struct ral steelwork are deemed to satisfy the
performance requirementsof the Regulationsif they are designed in a m dance with the Code of Practice for the
Structural use of Concrete and/or the Code of Practice for the Structural U e of Steel.
Regulatory Body
Buildings Department
1ZF Pioneer Centre
750 Nathan Road, Kowloon
General enquiries Tel: +852 2626 1616
e-mail: bdenq@bd.gcn.gov.hk
Notes
Any person who intends to cany out building works is required by law to a point an Authorized Person, and where
necessary a Registered Structural Engineer to prepare plans for approval om the Building Authority.
Government Publications Centre
Ground Floor.
Lower Block,
Queensway
GovernmentOffices,
66 Queensway,
Wanchal, Hong Kong
Tel: +852 2842 8844.
(Members of the public can also place their order directly through the Internet:
http:/lwww.info.gov. hk/bd/english/documents/index.htrnl)
0 BSI 2002
July 2002
HUNGARY
1. Law No uo(vIII of 1997
On the forming and protection of the constructed environment
2. Government Order No 253/1997. (X11.20)
On the national requirements of building as well as future developments of settlements
3. Order No. gal999 (XI. 5) FVM of the Minister of Agriculture and Coun* Development on the declaring mandatory of certain
national building standards.
1 8 2 give essential requirements for construction works. such as Direct& 89/1OWEEC
3 specifies mandatory standards
Standards
Design of Load bearing structures of buildings
MSZ 15020:1986
Design of load bearing structures of b ildlngs - General Requirements
MSZ 15021-1: 1986

MSZ 15021-2: 1986
Design of load bearing structures of bbldings Design loads for buildings

Design of load bearing structures of buildings Rigidity's requirements.
Steel Structures
MSZ 15024-1: 1985
MSZ 15024-2 1988 "
Designing requirements
MSZ 15028-1: 1976
MSZ 15028-2: 1984
'M
Statical design of load carrying cons ctions of buildings Aluminium construdons

Statical design of aluminium loadbea g structures for buildings Orinclples of strength
calculations
Concrete Structures
MSZ 15022-1: 1986
MSZ 15022-1: 1986 1M (1992)'
MSZ 15022-2: 1986
MSZ 15022-2: 1986 1M (1992)'
MSZ 150223: 1986
MSZ 150224: 1986
MSZ 15022-7 1986
MSZ 15022-7 1986 1M (1992)'
Design of load bearing structures of b' ildings

Design of load bearing structures of b ildlngs
Design of load bearing structures of b ildlngs
Design of load bearing structures of b ildings
concrete prefabricated structures
Design of load bearing structures of buildings
constructions
Design of load bearing structures of buildings
constructions
it:
Masonry Structures
MSZ 04-803-1 : 1989
MSZ 04-803-2: 1989
MSZ 15023: 1987
Wood StNctUreS
MSZ 04-803-6:
1989
MSZ 15025: 1989
- Reinforced concrete structures

- Reinforced concrete Structures
- prestressed concrete Structures
- prestressed concrete Structures

- Concrete structures
- Concrete, reinforced concrete and strained
- Structural regulations for reinforced concrete
- Structural regulations for relnforced concrete
Building structures for building and fi ng Masonry struartres

Building structures for building and fi ng Stone structures and stone sculpture work
Statistical design of load carrying mas nry constructions of buildings
Building structures for building and fiqng Timber structures and load bearing timber structures
StaUcal design of load carrying wooden constructions of buildings
General
MSZ 150282 1984
MSZ 15012-1:1986'
MSZ 15012-21985
Principles of strength calculations

Terminology
Symbols

All Eurocodes are acceptable in Hungary
Regulatory Body
Ministry of Agriculture and Country Development
Officefor Construction
H-1860 Budapest, Pf 1
Contact Kov&cslmre
0 BSI 2000
Sep-00
Notes
Building control is run on a local level
According to the lllingarian regulation innovative products as well as exported praducts require techntcal approvals.
PLC for Quality Control and Innovation in Building
Hungary, Budapest,
Di6szegi ut 37
Fax: 36-1-386-8794
Mandatory requirements
INDIA
National Building Code of India Part VI: Structural Design
Section 1: Loads
Section 2: Foundations
Section 3: Wood
Section 4: Masonry
Section 5: Concrete
Plain and reinforced concrete
- Prestressedconcrete
Sectlon 6 Steel
Section 7: Prefabrication and systems building
Standards
Foundations
IS 1892: 1979
IS 1904: 1983
IS 13063
Loading
IS 875 Part 1: 1987
IS 875 Part 2: 1987
IS 875 Part 3: 1987
IS 875 Part 4: 1987

IS 875 Part 5: 1987
Code of practice for subsurface inves gations for foundations

Code of practice for design and cons d o n of foundations in soils: General requirements
Structural safety of buildings on shallo foundations on rocks Code of practice
Code of Practice for design loads ( o er than earthquake) for buildings and structures.
Dead loads. Unit weights of building aterials and stored materials.
Code of Practice for design loads ( ottler than earthquake) for buildings and structures. Imposed
loads
Code of Practice for design loads ( oqer than earthquake) for buildings and structures. Wind
loads
Code of Practice for design loads ( oqer than earthquake) for buildings and structures. Snow
loads
Code of Practice for design loads ( other than earthquake) for buildings and structures. Special
loads and combinations.
IS 1893 1984
IS 4326 :1993
IS 13827: 1993
IS 13828: 1993
IS 13920: 1993
steel S t N d U r e S *
IS 800 1984 (1991)
IS 801: 1975 (1991)
IS 806 1968 (1991)

IS 808: 1989
IS 811: 1987
Concrete structures
IS 456: 1978
IS 457 1957 (1991)
Code of practice for general constructi n in steel (reaffirmed 1991)

Code of practice for use of cold form light gauge steel structural members in general building
construction
Code of practice for use of steel tubesiin general building construction
Dlmensionsfor hot rolled steel beam,
and angle sections
Cold formed light gauge structural ste
Code of practice for plain and reinfo
concrete
Code of practice for general construTn of plain and reinforced concrete for dams and other
massive structures
IS 1343:1980
IS 2210 1992
IS 2185: Part 1: 1979
IS 2185: Part 2: 1983
IS 2185: Part 3: 1984
IS 6072 1971
IS 6073 1971
IS 7861: Part 1: 1975
IS 7861: Part 2: 1981

IS 8989: 1978 '
limber structures
IS 883: 1994
IS: 1986
Masonry structures
IS 1905: 1987
0 BSI 2001
concreting
Code of practice for extreme weather concreting Recommended practice for cold weather
concreting
Safely code for erection of concrete framed structures
Design of structural timber in building Code of practice

Structural timber in building
Code of practice for structural use of uh-reinforced masonry
Aug-Ol
IS 3935: 1966 (1998)
IS 11384: 1985
Code of practice for composite construction

Code of practice for composite construction in structural steel and concrete

The Building Code of India is not a mandatory code therefore foreign standards which can prove compliance are acceptable.
Regulatory Body
,
Ministry of Urban Development

Government of India
Nirman Bhavan
Maulana &ad RuJd
New-Delhi-110011
Notes
Special Publication 7: 1983 National Building Code of India
Group 1: For architects
Group 2: FOi structural Design Engineers (covers Part VI of the NBC)
Group 3: For construction engineers
Group 4: For building services engineers
Group 5: For plumbing services engineers
Available from
Bureau of Indian Standards
Manak Bhavan
9 Bahadur Shah Zafar Marg
New Delhi 110002
Tel: +91 11 323 0131
Fax: +91 11 323 4062
Building bye-laws are enforced by the concerned municipality/municipalcorporation/developmentauthority of the area in the VariOUS
states of India.
Central Building Research Institute,
Roorkee 247 667
Uttar Pradesh
India
Phone: 91-1332-72243 FAX 91-1332-72272/72543
Email vkm@cscbri.ren.nic.in
www.cbri.org or www.csir.res.in/cbri
Imported cement and steel products must comply with mandatory Indian quality ktandards. The standards include printing of
maximum retail sale price inclusive of all taxes, date of packaging, net quantity ankJ generic or common name of the commodity
besides name and address of importer.
INDONESIA
Not reported by authority
Standards
SNI 03-28451992
Code of design for modular apartment
Loading
SNI 03-1727-1989
SNI 03-2397-1991
Loading speciflcation for houses and uildings, guide for design

Wind resistance simple buildings, Cod for design
SNI 03-1726-1989
Seismic resistance design code for hohses and buildings, Guide
steel structures
SNI 03-17291989
Steel construction for buildings, guide for design
Concrete
SNI 03-1734-1989
SNI 032847-1992
SNI 03-3430-1994
Masonry structures
SNI 03-3431-1994
Stone and building Code for controllihg horizontal displacement by Inclinometer instrument

Not reported by authority
Regulatory Body
Ministry of Settlement and Region Development
0 BSI 2000
I
Sep-00
ISRAEL
All the standards listed below are mandatory, as being referred to by the Design and Building Regulations, published by the Interior
Ministry
Standards
Loading
SI 109 1996
SI 412 -:1992 (1993)
SI 414: 1982 (1984)'')
SI 1227 Part 1 1988 1999
SI 1227 Part 2 1990 ['I
(')
Weight of building materials and structural parts

Loads on structures: Characteristic lodds
Characteristic loads In buildings. Wind loads
Loads on bridges: Highway bridges
Loads and geometrical requirements for bridges: Railway bridges
SI 413: 1995 (1998) (')
Design provisions for earthquake resistanceof buildings
Steel structures
SI 1225 Part 1 - 1998"'
Steel structures code: General
None
Concrete structures
SI 466 Part 1 1987 (1997) ('I

SI 466 Part 2 1979 (1996) U)
SI 466 Part 3 1987 (1995) (')
SI 466 Part 4 1991 (1999)
SI 466 Part 5 1987 (,)
1996)
SI 940 1988 (1993)
Concrete Code: General principles

Reinforced and urbreinforcedconcrete structures
Concrete Code:
Concrete Code:
Prestressedconc ete
Precast concrete lemenk and structures
Concrete Code:
Precast prestress& hollow core slab floors
Concrete Code:
Foundationsfor buildings
Masonry structures
None
limber structures
None

Regulatory Body
Building RegulationCoordination Unit
PO Box 6158, Hakiria. Kaplan 2, Jerusalem 91061
Tel: 972 2 6701450
Fax: 972 2 6701633
.
E-mail: davidp@moin.gav.il
Notes
(1) The standard is under revision. In brackets is written the date when the last correction to the standard was published.
The Israeli standards published by SI1 have a voluntary status. The statusd the standards can be changed to mandatory. either by
decree that they are official standards or by their reference in secondary ldgislation (decrees or regulations)of government
ministries.
0 BSI 2001
Aug-Ol
IVORY COAST
There are no national regulations or codes.
Documents covering Public Works make reference to RBgles del Iart (state of the art). This is not
formalised in any document
French codes are mainly used (see below)
Standards
Loading
Ri?gles Neige et vent
Rules MI 65.Rules defining the effects on buildings of snow and winds and
appendices.
none
steel structures
none
Alumlnlum structures
none
Concrete structures
BAEL 91
Rhgles BP
Technical Rules For The Design of Reihforced Concrete Structures

According to the Limit States Method
Technical Rules for the Design of Prestresshd Conaete. Rules BPEL 91
Masonry structures
none
Tlmber structures
none
Internationaland French Standards are acceptable and widely used in Ivory Coast
Regulatory Body
Notes
The above informaiton was received from the Engineer of Public lkorks at Codlnorm
0 BSI 2002
Jan-2002
JAPAN
The Building Standard Law of Japan (BSL) (Japan's building code)
Standards
Loading
See notes
See notes
Steel structures
See notes
Concrete structures
See notes
Timber structures
See notes

The new Japanese Building law is a Performancebased code therefore
building satisfies the performance criteria for structural safety, fire
mponents can be made to any standards if the completed
Regulatory Body
Housing Bureau
Building Guidance Division
Tel: +81 3 3580 4311
Fax: +81 3 3580 7050
Notes
Information expected from the authority will be included in next update.
0 BSI 2001
Sep-00
KYRGYZ REPUBLIC
SNIP KP 23-02-00
SNIP KP 20-01-00
SNIP KP 2.01.02-94
SNIP 22-01-96 KP
SNIP 11-7-81
SNIP 22-01-96
SNIP 2.01.1590
SNIP 11-23-81
SNIP 111-ia75
SNIP 2.03.06-a5
SNIP 2.03.01-84
SNIP 2.03.02-86
SNIP 2.03.03-85
SNIP 2.03.04.84
SNIP 11-22-81
SNIP 111-24-75
SNIP 11-2580
Building
Wind and ice loading on wires, cables and support air lines
Earthquake resistant construction in s ismlc areas.
Rating of seismic stability in existing b, ildings
Geophysics of dangerous
structures from dangerous geological processes.
Engineering protection of
Basic design rules.
Steel structures
Metal structures
Concrete and reinforced concrete s tures
Dense silicate plain concrete and r e q r c e d concrete structures
Design manual for concrete and reinfdrced concrete structures for the use oat high and
I
Wood structures
Standards
Loading
GOST 7076-87 (CTC3B 492383)
GOST 23337-78 (CTC3B 2600-
80)
Building materials and products. Methpd of thermal conductivity determination

Noise. Methods of noise measuremerit in residential areas and in the rooms of residential, public
and community buildings
See regulations
Steel structures
KMC 21.15.004-96
GOST 23682-79
cranes having loadSpecifications
GOST 2404594
GOST 26047-83
GOST 22233-93
GOST 24767-81
Extruded profiles of aluminium alloys or encosure building structures. General specifications

Cold bent profiles of aluminium and a1 minium alloys for enclosure building structures.
Specifications
Concrete structures
GOST 13015.0-83
Masonry structures
KMC 21.60.01-00
GOST 24992-81
CT C3B 4417-83
Bricks and ceramic stones

Masonry structures. Method of
Masonry structures. Reliability
Timber structures
GOST 4981-87
Wooden joists

Eurocodes are not acceptable in Kyrgystan although there are plans to a e p t British, US and German Standards in the future.
Regulatory Body
State Inspectionfor Standardization and Metrology under the Government of the Kyrgyz Republic
197 Punilov Str
Bishkek
720040 Kyrgystan
Tel: +996 312 22 78 84
Notes
SNIP documents are building regulations and standards from the former USSR. They continue to be used in Kyrgyz Republic both
with and without changes.
GOST standards are from the former USSR. They continue to be used in Kyrgyz Republic both with and without changes.
KMC standards are state standards of Kyrgyz Republic.
0 BSI 2002
July 2002
LATVIA
Building Law 1995
LBN 000
LBN 001
LBN 004-01
LBN 202-01
June the 2gm1992; has amendments)

from March the 1' 1992)
The list of building codes (in force

The basic statute of building
design Draft
document
Provisions for the designing of concre e and reinforced concrete structures (approved by
regulations Nr. 451 of December the 3" 1997 of the CM; in force from May the 1- 1998)
Provisions for the designing of mason and relnforced masonty structures (approved by
regulations Nr. 139 of April the 21- 1 8 of the CM; in force from May the 1" 1998)
Provisions for designing of timber stru res (approved by regulations Nr. 140 of April the 13m
1999 of the CM; in force from July the 1- 1999)
Geotechnics and foundations of cons ction works Draft document
Designing pmvisionsfor pile foundati ns Draft document
Regulationsfor the procedure of the ntrol of production and quality assessment of building
materials and construction products, rovided by enterprises (in force from April the lp 1991)
Regulations for content and drafting nditions of the design of performance of construction
(approved by regulations Nr. 221 of J ne the 25m1997 of the CM; in force from July the 11997)
LBN 203-97
LBN 20597
LBN 206-99
LBN 207-01
LBN 214-01
LBN 302
LBN 310-97
Standards
Loading
See above
See above
Steel structures
See above
See above
Concrete structures
See above
Masonry structures
See above
Timber structures
See above

Structural Eurocodes currently adopted
LVS ENV 1991-2-1: 2000
Basis Of Design And Actions On
LVS ENV 1991-2-7 2000
LVS ENV 1991-3 2000
LVS ENV 1992-2: 2000
Design Of Concrete Structures
LVS ENV 1993-2: 2000
Design Of Steel Structures Bridg
LVS ENV 1994-2: 2000
Design Of Composite Steel 8 Con
LVS ENV 19952 2000
Design Of Timber Structures Bridg
tructures Bridges
In the future it will be possible to design after national Standards of Scandinavian countries in cases where there is neither Latvian
regulations or CEN standards. (See below)
Regulatory Body
Ministry of Environmental Protection and Regional Development (MEPRD)
Peldu Str 25, Riga,
LV-1494,
Latvia
Tel: +371 7026461. +371 7026462
Fax: +371 7820442
Notes
At present many LBNs cite Russian Snip Standards.
Latvia is in the process of changing these. During the transition phase up
Estonia, with the technical assistance of neighbouring Scandinavian cOun
Eurocodes and other European Standards and IS0 standards.
0 BSI 2001
Aug-Ol
LITHUANIA
Technical Regulations:STR 106.01: 1999 Assessment of the construction project and the structur
STR 1 02.04: 1999 Certification of the enterprises responsible for assess$nt of structures
STR 1.02.03: 1997 Certification of design and construction enterprises
STR 1.01.01 : 1996 The system of normative documents applied in the field of construction, their drafting and approval
STR 1.11.Ol :Acceptance procedure for structures
STR 2.01(1): 1999 Essential requirementsfor structures. Mechanical resis ance and stability
STR 2.01.01(6): 1999 Essential requirements. Energy saving and heat co servation
STR 1.01.04: 1999 Construction products. Conformity assessment and C marking
STR 1.03.02: 1999 Conformity declaration for construction products
STR 1.09.01: 1996 State surveillance procedure for specific requirements In constructionfield
Standards
Loading
See Eurocodes
Steel structures
See Eurocodes
See Eurocodes
Concrete structures
LST 1512.1: 1998
LST 1512.2: 1998
LST 1512.3: 1998
LST EN 1504-1: 2000
LST L ENV 136701:2000
Reinforced concrete structures. Nondestructive ethods. Determiningthe concrete cover,

diameter and location of reinforcement bars by eans of magnetic method
Reinforced concrete structures. Nondestructive esting methods. Determining the prestress of
uency
reinforcement bars measuring the fundamental
esting methods. Determination of strength
Reinforced concrete s t ~ c t u r eNondestructive
~.
according to number of steel hammer
Products and systems for the protection and rep lr of concrete structures. Definitions,
requirements, quality control and evaluation of c&formity Definitions
Execution of concrete structures. Part 1: Comma
Masonry structures
See Eurocodes
Timber structures
See Eurocodes
See Eurocodes

The following Eurocodes
Eurocode IBasis of design and action on structures
LST L ENV 1991Eurocode 1: Basis of design and actions on strudtures. Part 1: Basis of design
1:2000
LST L ENV 1991-2Eurocode 1: Basis of design and actions on stru+ures. Part 2-1: Actions on structures.
1:2000
Densities, self-weight and imposed loads
LST L ENV 1991-2Eurocode 1: Basis of design and actions on strudures. Part 2-2: Actions on structures. Actions
2:2000
on structures exposed to fire
LST L ENV 1991-2Eurocode 1: Basis of design and actions on strudures. Part 23: Actions on structures. Snow
32000
loads
LST L ENV 1991-2Eurocode 1: Basis of design and actions on stru&res. Part 24: Actions on structures. Wind
4:2000
actions
LST L ENV 1991
Eurocode 1: Basis of design and actions on structures. Part 3: Traffic loads on bridges
3:2000
Eurocode 1: Basis of design and actions on structures. Part 4: Actions on silos and tanks
LST L ENV 1991
4:2000
Eurocode 2 Design of concrete structures
Eurocode 2: Design of concrete structures. Part 1: General rules and rules for buildings
LST L ENV 1992-11:2000
Eurocode 2: Design of concrete structures. Part 1-2: General rules. Structural fire design
LST L ENV 1992-1-2
+AC:2000
Eurocode 2: Design of concrete structures. Part 1-3: General rules. Precast concrete and structures
LST L ENV 1992-1-3:
2000
elements
0 BSI 2002
Jan-2002
Eurocode 2: Design of concrete structures. Part 1-4: General rules. Lightweight aggregate
concrete with closed structure
Eurocode 2: Design of concrete structures. part 1-5: General rules. Structures with unbonded
LST L ENV 1992-1-5:
2000
and external prestressing tendons
LST L ENV 1992-l-S:2001 Eurocode 2. Design of concrete structures. Part 1-6: General rules. Plain concrete structures
Eurocode 3 Design of steel structures
Eurocode 3: Design of steel structures. Paq 1-1: General rules and rules for buildings
LST L ENV 1993-11+A1+A2:2000
LST L ENV 1993-1-2:2000 Eurocode 3: Design of steel structures. Paq 1-2: General rules. Structural fire design
Eurocode 4 Design of composite steel and concrete structures
LST L ENV 1994-1-1:2000 Eurocode 4. Design of composite steel and concrete structures. Part 1-1: General rules and rules
for buildings
Eurocode 4. Design of composite steel and bncrete structures. Part 1-2: General rules.
LST L ENV 1994-12+AC1: 2000
Structural flre design
Eurocode 5 Design of timber structures
LST L ENV 19951-1:2000 Eurocode 5. Design of timber structures. Pa 1-1: General rules and rules for buildings
LST L ENV 1995-1-2:2000 Eurocode 5. Design of timber structures. P a t 1-2: General rules. Structural fire design
LST L ENV 1992-142000
Eurocode 6 Design gf masonry structures

LST L E N 1996-1-1:2000 Eurocode 6: Design of masonry structures. Tart 1-1: General rules for buildings. Rules for
reinforced and unreinforced masonry
I
LST L ENV 1996-1-2:2000 Eurocode 6 : Design of masonry structures. art 1-2 : General rules. Structural fire design.
LST L ENV 1996-1-3:2000 Eurocode 6 : Design of masonry structures. art 1-3: General rules for buildings. Detailed rules
on lateral loading
LST L ENV 1996-22000
Eurocode 6 : Design of masonry structures. Part 2: Design, selection of materials and execution
of masonry
LST L ENV 1996-3:2000
Eurocode 6 : Design of masonry shctures. Part 3: Simplified calculation methods and simple
rules for masonry structures
Eurocode 7 Geotechnical design
LST L ENV 1997-1:2001
Eurocode 7: Geotechnical design. Part 1:
Eurocode 7: Geotechnicaldesign. Part 2:
LST L ENV 1997-2:2001
Eurocode 7: Geotechnical design. Part 3:
LST L ENV 1997-3:2001
Eurocode 9 Design of aluminium structures

LST L ENV 1999-1-1:2000 Eurocode 9: Design of aluminium structures. Part 1-1: General rules. General rules and rules for
buildings
Regulatory Body
Ministry of Environmental Protection
Notes
Building control is performed by State Territory Planning and Construction inspectorate under Ministry of Environmental
Protection
Certification Centre for Construction Produds
Linkmenu 28
2600 Vilnius
Lithuania
Tel: +370 2 72 80 78
Fax: +370 2 72 80 75
A l i t of regulations and standards covering testing of construction products is available.
BSI international Survey
MALTA
Mandatory Standards
LN 47: 1988 (Ml of 1988)
LN 16: 1981 (M8of 1981)
LN 10: 1986 (M15 of 1986)
LN 60: 1987 (M20 of 1987)
Hot rolled steel bars for the reinforce ent of concrete

Crete
Steel fabric for the reinforcement of
Building and Sanitary pipes in asbest cement
Polyethylenedamp-proof courses for masonry

In Malta warranted architects and Civil Engineers are not bound to apply any particular Standards of Code.
Regulatory Body
Minisby for Environment
Works Division, Project House,
Floriana CMRO2,
MALTA
Phone (00356) 221411
Fax (00356)234145
' URL: http:/~.magnet.mt/home/moe/hdex.html
Notes
It is planned to adopt The Construction Products Directive in 2001
0 BSI 2000
sep-oo
MOLDOVA
SNIP 2.01.07-85
SNIP 11-23-81
SNIP w i a 7 5
SNIP 2.03.06-85
SNIP 2.03.01-84
SNIP 2.03.02-86
SNIP2.03.03-85
SNIP 2.03.04-84
SNIP 2.06.0887
NCM F.03.02-99
SNIP 111-2475
SNIP 11-2580
Loads and effects

Steel structures
Metal structures
Concrete and reinforced concrete stnictures
Dense silicate plain concrete and reinforced concrete structures
Design manual for concrete and reinfdrced concrete structures for the use at high and extremely
high temperatures
ures for hydraulic facilities
Concrete and reinforced concrete s
Design and calculation of masonry T c t u r e s
Wood structures
Standards
Loading
GOST 27751-88
Reliability of the constructions and th$ foundations. Principle rules of the calculations
See regulations
Steel structures
GOST 3024594
GOST 2404594
Steel bent welded closed square and

Steel sheet bent profiles with trapezoi
structures. Specifications.
purpose. Specifications
GOST 22233-93
Extruded profiles of aluminium alloys for enclosure building structures. General specifications
Concrete structures
See regulations
Masonry structures
SP MD 91-26-00598
SP MD 91-026-012-98
SP MD 91-26-013-98
SP MD 91-026-01598
Stones sawn from the rock for the mabonry. Technical spedfication
Stones tom. Technical specification '
Ceramics pieces for town planning an organization of public services. Technical specifications
Brick, ceramics, blocks, and profiles. echnical specification.
Timber structures
See regulations

None
Regulatory Body
Ministry of Environment and Territorial Planning
MD 2005, str. Cosmonautilor, 9
Chisinau,
Moldova
Tel: +373 2 22 86 08
Fax: +373 2 22 07 48
e- mail: dt@mediu.moldova.md
Notes
Moldovastandard
MD 2064, str. Coca, 28.
Chisinau
Moldova
Tel: +373 2 74 85 88
Fax: +373 2 75 05 81
SNIP Russian regulations
GOST Russian Standards
NCM Moldovan Construction regulations
SP MD Moldovan National standards
0 BSI 2002
July 2002
NEPAL
Nepal Building Act 1998
Standards
Loading
NBC 103
NBC 104
NBC 107
NBC 202
Earthquake reslstance
NBC 105
NBC 203
NBC 204
Steel structures
NBC 111
NBC 113
Concrete structures
NBC 110
NBC 201
NBC 205
Masonry structures
NBC 109
Timber structures
NBC 112
Other
NBC 000
NBC 101
NBC 102
NBC 107
NBC 108
Occupancy load
Wind load
Snow load
Mandatory rules of thumb: Load bearihg masonry
Seismic design of buildings in Nepal
Guidelines for earthquake resistant blilding construction Low strength masonry
Guidelines for earthquake resistant bqiiding construction Earthen buildings
Steel
Aluminium
Plain & reinfoced concrete
Mandatory rules of thumb relnfoced
Mandatory rules of thumb reinfoced
ncrete buildling with masonry infill

ncrete buildling without masonry infill
Masonry Unreinforced
Timber
Requirements for state of the art design
Materials specification
Unit weight of material
Fire safety
Site consideration

Indian Standards, British Standards and the US Uniform Building Code are used but in an informal way at a personal level.
Regulatory Body
Ministry of Physical Planning and Works
Depattment of Urban Development and Building Construction
Babamahal
Kathmandu
Tel: +977 1 262927
Fax: +977 1 262439
Mail: dhuh@dhud.wlink.com.np
Notes
The minisby Implementsthese codes throughout Nepal.
0 BSI 2001
Aug-Ol
NEW ZEALAND
Building Regulations 1992 contain the mandatory New Zealand Building Code
Standards
Cited in non-mandatory Approved Document
Loading
NZS 420x1984 8 1992
General structural design and design Ikadings for buildings
NZS 4219: 1983
Steel structures
NZS 3404: Part 1: 1992
Concrete structures
NZS 3101: Part 1: 1995
Timber structures
NZS 3603: 1993
NZS 36O4:1999
ASlNZS 1664.1 :1997
AS/NZ 1664.2: 1997
Masonry structures
NZS 4230: Part 1: 1990
NZS 4230: Part 2: 1990
NZS 4210: 1989
NZS 4229: 1999
Earth Structures
NZS 4297:1998
Specificationfor seismic resistance of engineering systems in buildings

Steel structures standard
The design of concrete structures
Timber structures standard
Timber framed buildings
Aluminium structures-Limitstate desigp

Aluminium structures Allowable stresb design
Code of practice for the design of ma ! nry structures Specifies minimum requirements for the
design of masonry buildings and otheTmasonry structures
Commentary on Part 1.
and workmanship
Code of practice for masonry
engineering design
Concrete masonry buildings not
Engineeringdesign of earth buildings

A number of foreign standards are cited in the Approved Documents.
Regulatory Body
Building Industry Authority
Greenock House
39 The Terrace
PO BOX11-846
Wellington
New Zealand
Telephone: 04471 0794

Toll-frbe: 0800 242 243
Facsi$ile: 04471 0798
Email' bia@bia.govt.nz
www.dia.govt.nz
Notes
voluntary.
The Territorial Authorities administer the Act and Regulationswithin their krritories by:
issuing project information memoranda
approving or refusing building consent applicationswithin prescn ed time limits
granting or refusing waivers or modificationsof the Building Cod
issuing code compliance certificates
issuing compliance schedules and recording building warrants ofjfitness
enforcing the provisions of the Building Act, the Building Regula ons and the New Zealand Building Code
maintaining records of building information and making them av rlable to the public.
Owners have the choice of employing a Building Certifier to check plans a d specifications at building consent stage and perform
inspectionsduring construction.
Accreditations (approval of specific products, systems, or methods)are carried out by the BIA on receipt of an appraisal from a
suitably qualified and independentappraiser.
0 BSI 2002
July 2002
PHILIPPINES
The National Building Code of the Philippines (NBCP) and its lmplementinp Rules and Regulations.
Standards
National Structural Code of the
Philippines (NSCP)
Volume 1 Buildings, Towers, and
Other Vertical Structures
Fourth Edition, 1992
Code of Practice for Structural

Design of Buildings (4sreferral
Code of NBCP)
(Acceptable Reference: Guide on Earthquake

Resistant Design of Buildings by the
Association of Structural Engineers of the
Philippines 1991 ASEP Guide)
Design guide for seismjc design

of buildings as per provisions
of the 1992 NSCP
Structure Design
Requirements
NSCP Vol. 1: Chap. 1:1992

SEP Guide: Part 1, Chap. 31991
Loadings
ASEP Guide Part 1: Chap.21991
Minimum Design Loada and Lateral Forces for Buildings and Other Related
Structures
Lateral Forces
Earthquake Resistance
ASEP Guide: Part 1, Chap. 1:1991
Introductionto Earthqu ke Resistant Design

Recommended Structu I Detailing Practices
Structural Systems
Foundation
Excavations, Foundatiqns and RetainingWalls
Grading and Earthworkk

NSCPVol. 1: Chap. 8:1992
Steel Structures
ASEP Steel Handbook: Part 1:
1994
1994
1994
1994
1994
1994
1994
Steel 8 Metal
Built-up Shapes
Cold-Formed Plate Shapes
Cold-Formed Light Gage Shapes
Rolled Shapes
Metal Decks
Steel Flat Products
Welded Joints
Concrete Structures
NSCP Vol. 1: Chap. 5: 1992
Concrete
Masonry Structures
Masonry
Timber Structures
Wood

A.
B.
C.
D.
E.
F.
Building Code Requirements for Structural Concrete American Concrete Institute (ACI-318)
American Institute of Steel Construction (AISC Manuals)
ASTM Standards
Uniform Building Code (UBC)
British Standards (BS)
Japanese Industry Standards (JIS)
0 BSI 2002
July 2002
Regulatory Body
Department of Public Works And Highways (DPWH)
Bonifacio Drive, Port Area, Manila, Philippines
Tel. No.: (+632)304-3000
FAX NO.: (632)304-3017
Department of Interior and Local Government (DILG)
A. Francisco Gold Condominium 11, EDSA corner Mapagmahal SI.,
Brgy. PiRahan, Diliman, Quezon City, Philippines
Tel.: (+632)920-3513
(632)925-0320to 23
Fax : (632)925-0332
Notes
Building permits are secured prior to construction. Permits are issued by Local Building Officials
(LBOs). LBOs enforce the provisions of the NBCP and its referral $odes. LBOs are under the
administrative supervisions of the Local Authorities who are in tum under the DILG. DPWH develops
the NBCP and its implementing rules and regulations and has appellate jurisdiction over the decisions
of the LBOs made pursuant to the provisions of the NBCP.
0 BSI 2002
July 2002
POLAND
Ustawa Prawo Budowlane (The law on building and

entered into force on 1 Jan. 1995. published in the (XI
Standards
Foundations
PN-811B-03020
PN-80/8-03040
PN-83/B-02482
Actions of Building Structures

PN-82/ 8-02000
PN-82/ 8-02001
PN-82/ 8-02003
Principles of the establishment of values.

Contains 25 terms with their definitio$s related to actions on buildings.
Permanent actions.
Describes NIB for determination of jctions by construction deadweight, ground weight and
actions by Initial construction prestre sing.
Variable actions during construction nd assembling.
Loading
PN-80/ 8-02010
PN-77/ 8-02011
PN-86/ 8-02015
PN-87B-02013
PN-8W 8-02014
Loads on building structures.

loads. Temperature loads.

loads. Atmospheric iceloads
Steel structures
PN-90/B-03200
PN-93/B-03201
PN-B-03202:1996
PK78B-03203
PN-79B-03204
PN-B-03205:1996
PN-B-03206:1996
PN-8yB-03215
PN-B-062003997
PN-63/B-06201
PN-80/B-03203
PN-89/S-10050
PN-82/S-10052
Steel structures. Static calculation anP design rules.
Steel structures. Bridges. Design.
PN-64B-03320
Aluminium structures. Static calculatipn and design
Concrete structures
PN-7VB-06280
PN-89B-03262
PN-87B-03263
Structures of large size precast reinwrcedconcrete elements. Code of practice and

acceptance
Concrete tanks for storing granular aterials and silages. Static calculation and design.
Concrete. reinforced and prestress concrete made of lightweight aggregate copncretes.
Static calculation and design
Concrete, reinforced concrete and prgstressed concrete structures. Static calculation and
I
design
Concrete and reinforced concrete wop. Post-tensioned prestressed concrete structures.
Specifications and acceptance tests
Masonry structures
PN -87/8-03002
PN-67/B-03005
Brickwork and reinforced concrete dmneys. Static calculation and design rules
Masonry structures of brick and othed small sized components with reinforcement. Static
calculation and design.
Timber structures
PN-81B-03150.00
PN-81/B-03150.01
PN-81/&03150.02
PN-81/B-03150.03
Timber and wood based material s

ctures. Static calculation design. General rules

ctures. Static calculation design. Materials
ctures. Static calculation design. Constructions
ctures. Static calculation design. Joints
PN-89/B-03340
PN-82/B-03300
PN-86/B-03301
0 BSI 2000
Composite masonly structures. Statiq calculation and design.

Steelconcrete composite structures. ICompositethick-section beams
Steelconcrete composite structures. 'Static calculation nd design. Composite columns
Sep-00

Foreign structural designs (including Eurocodes) are not acceptable in Poland.
Regulatory Body
Ministershvo Spraw wewnetrznych I Administracji (Ministry of Interior
Departament Budownichva,Architektury, Geodezji I Kartografii (Dept
Cartography)
UI. Wspolna 2/4
00-926 warszawa
Architecture, Geodesy &
Tel: +4a 22 661 80 37

Fax: +4a 22 621 38 72
Director: Stanislaw Zieleniewski
Notes
Building material for sale or use in Poland must carry either "6-certificate or a certificate of approval according to Polish
tsciinical standards.
From:
Polskie Centrum Badan i Certyfikacji, PCBC
ul. Klobucka 23A
02-699 Warszawa
Tel: +48 22 647 10 71
Fax: +4a 22 s42 12 22
ROMANIA
Standards
Actions upon structures
STAS 1010110 : 1975
Classification and combination of actiqns.
STAS 1010110A : 1977

(Together with STAS 1010110
STAS 10101lOB : 1987
Loading
STAS 10101120 : 1990
STAS 10101121 : 1990
STAS 10lOlll : 1978
STAS 1010112 : 1975
STAS lOlOV2Al : 1987

STAS 10101/2A2 : 1978
STAS 10101123 : 1975
STAS 10101123A : 1978
Action of the wind.

Snow loads.
Technical weights and dead loads.
Loads due to the exploitation process:
(Supersedes STAS 506:1971)
Technological loads for non-industrial, industrial and agrozootechnical buildings
Actions due to the exploitation proms$. Loads due to overhead travelling cranes.
Loads due to external temperature.
(Partially supersedes STAS 946:1956]
Loads due to the external temperaturei on non-industrialand industrial structures.
STAS 9165: 1972
STAS 931511: 1980
STAS 1110011: 1977
General Design rules for construction In seismic zones

Equipment for chemical and petrocherhical Industry. Seismic actions
Seismic zones. Zones of Romania
Steel structures
STAS 1010376
STAS 76710-88
STAS 101ONO-78
Steel construction. Basic design

Civil, Industrial 81Agricultural constru on. Steel construction. General quality requirements
Civil, Industrial 8 Agricultural constru on. Design of steel elements
Concrete structures
STAS 10102-75
STAS 1010710-90
STAS 1010711-90
STAS 665711-89
Concrete construction. Reinforced and prestressed concrete. Basic requirements for design and
selection of components
Clvil. Industrial 8 Agricultural construc$on. Design specification for structural elements of
reinforced and prestressed concrete
Civil, Industrial 8 Agricultural construdon. Blocks of reinforced and prestressed concrete.
General design specification.
Concrete prefabricated elements. Relhforcedand prestressed concrete. General quality
requirements.
Masonry structures
STAS 10104-83
Masonry construction. Elementary structural deslgn
limber structures
SR EN 338: 1997
SR EN 380:1996
SR EN 383: 1996
SR EN 408: 1996
SR EN 409: 1996
SR EN 595: 1997
SR EN 596: 1997
SR EN 789: 1998
STAS 8 5 ~ 1
STAS 857-83
Structural Timber Strength classes

Timber Structures Test methods General principles for static load testing
Timber structures Test methods Dekermination of embedding strength and foundation values
Timber structures structural timber apd glued laminated timber Determlnationof some
physical and mechanical properties
Timber structures Test methods Ddtermination of the yield moment of dowel type fasteners
Nails
Timber structures Test methods T q t of trusses for the determination of strength and
deformation behaviour
Timber structures Test methods Soft body impact test of timber framed walls
Timber structures Test methods Dqerminationof mechanical properties of wood based
panels
Timber construction. Design methods
Timber elements and parts for construction. Classification and quality requirements.
Prefabricated structures
STAS 9581-87
Civil. Industrial 8 Agricultural construction. Design with prefabricated parts. Classification.,

Specification, Technical drawlngs

EN adopted standards listed
0 BSI 2000
Sep-00
Regulatory Body
State Inspection in Building Construction, Public Works, Town planning and Territprial Planning
Inspeqia de stat In Construqii, LucrBri Publice, Urbanism gi Amenajarea Teritoriului (ISCLPUAT)
Str. Apolodur nr. 17
Sector 4
BucureSti
Tel: +40 1 336 85 74
Fax: +40 1 336 85 18
Notes
Product certification carried out by:
Romanian Register for Building Construction Machinery and Equipment
Registrul RomBai Maginitor si EchipamentelorTehnologice de Construcfii
Soseaua Pantelimo,, nr. 266
Sector 2
73559 Bucuregti, CP 3-33
tel: +4C 1 255 0'7 341255 04 72
fax: +40 1 255 14 20
RUSSIA
Over 200 building codes and nearly 8000 standards and guidelines make up the Building Regulations in Russia.
Foundations
SNIP 2.01.09-91
SNIP 2.02.01-83
SNIP 2.02.02-85
SNIP 2.02.04.88
TSN 50-301-96
TSN 50-302-96
Buildings and structures on underworking and subsiding soils

Foundation beds for buildings and sWctures
Pile foundations
Beds and foundations on permafrost oil
Design of foundation beds and foundTtions for buildings and structures constructed in areas with
permafrost soil
Construction of foundations for civil b ' ildings and structures located in the Metropolitan area
administered by the city of St PetersbLrg
Loading
SNIP 2.01.07-85
SNIP 2.02.05-87
SNIP 2.06.04-82
SNIP 3.03.01-87
TSN 20-301-97
Loads and effects

Foundations for machinery producing impact load
Loads and effects arising on hydraulidstructures from Seaway, Ice, and Vessels
Loadbearing structures and enclosures
Snow loads-
SNIP 11-7-81
Steel structures
SNIP 11-23-81
Steel structures
Alumini urn structures

SNIP 2.03.06-85
Concrete structures
SN 511-78
SNIP 2.03.01-84
SNIP 2.03.02-86
SNIP 2.03.04-84
the use at high and extremely

high temperatures
Masonry Structures
SNIP 11-22-81
Masonry and reinforced masonry struktures
Timber Structures
SNIP 11-25-80
Wood structures
Other Structures
SN 428-74
SN 497-77
SNIP 2.03.09-85
SNIP 2.06.01-86
Cfl53-101-98
Guidelinesfor the design, installationand maintenance of structural glass shapes.

Interim guidelines for the design, eredtion. and maintenanceof air-supported pneumatic
structures
Asbestos-cement structures
Hydraulic structures Basic design prpvisions
Regulationsfor designing and quality$controlfor steel constructions in buildings
Standards
See above
With the exception of a few areas covered by Internationalconventions I ternational and foreign standards are not recognized and
cannot be officially used in Russia unless adopted by the appropriate aut ority.
Regulatory Body
Gosstroy The State Committee for Construction

Gosstroy VNllNTPl :
Russia, 125047, Moscow, I-st Tverskaya-Yamskaya St.. 6.
Tel: +7095 133-1281/+7095 131-3965 1+7095 133-0771.
http://www.gosstroy.ru
E-mail: director@vniintpi.net.ru
0 BSI 2002
July 2002
Notes
SNIP Regulatory Information Services
Provides information on industry standards, technical regulations, and conformity assessment programs adopted in Russia and CIS
states. They also provide procurement, distribution and translation of the regulatory and technical documentation.
SNIP can be found at
http://www.snip.com/general/index.html
Gosarkhstroynadzor
Federal InspectionAgency for Architecture and Construction
Has offices in every municipality and inspects construction projects from (he design phase through to completion and acceptance for
compliance with building codes and standards and makes sure that the designers and contractors specify and use approved
building products, materials, and equipment.
Gosexpertiza
State InterdepartmentalQuality Assessment Agency
This organization works for the local administrations to provide independent assessment of construction projects for compliance with
national and local regulations.
0 BSI 2002
July 2002
SINGAPORE
Building Control Act (revised edition 30/12/1999)
Building Control Regulations (Revised edition 31.1.2000)
Standards
Loading
Building Control Regulations (based oh BS CP 3)
None
Steel structures
SS2: Part 1: 1999
SS2 Part 2 1999
SS2 Part 3 1987
SS18 Part 1: 1999
SSl8 Part 2: 1970

SS 32 : Part 1 : 1999
SS 32: Part 2 : 1986
SS 427 : 1998
SS 475:- Part 1 :2000
(IS0 6934-1 : 1991)
SS 475:- Part 2 :2000
(IS0 6934-2 : 1991)
SS 475:- Part 3 : 2000
(IS0 6934-3 : 1991)
SS 475:- Part 4 : 2000
(IS0 6934-4 : 1991)
SS 475:- Part 5 : 2000
(IS0 6934-5 : 1991)
Steel for reinforcement of concrete P ain bars (steel grade 300)

Steel for reinforcement of concrete dbbed bars (steel grade 5000)
Hot rolled steel bars for the reinforce ent of concrete
Cold reduced steel wire for the reinfoqamentof concrete and the manufacture of welded fabric
Part 1: Steel grade 5000
Steel for the prestressing of concrete Colddrawn wire

Quenched and tempered wire
Strand
Hot-rolled steel bars with or without subsequent processing
Concrete structures
CP 65 Part 1: 1999
CP 65: Part 2: 1996
CP 73: 1998
CP 81: 1999
Code of practice for structural use of ncrete. Design and construction

Code of practicefor structural use of Tncrete. Special drcumstances
Code of practice for design of concrete structures for retaining aqueous liquids
Code of practicefor concrete slab and'wall panels
Masonry structures
None specified
limber structures
ss CP 7
Code of practice for the structural use of timber
Miscellaneous
CP 11: 1992
CP 24: 1999
CP 57 : 1991
Demolition
Code of practice for energy efficiency ' tandard for building services and equipment
Setting out of building and civil engin ring works

CP 118:
BS 5400
BS 5950:
BS 8002
BS 8118
For aluminium structures

Steel, Concrete and composite bridges
For steel structures
Earth retaining structures
Regulatory Body
Building 8 Construction Authority
Building Control
5 Maxwell Road
# l W O MND Tower Block
Singapore 069110
0 BSI 2001
Aug-Ol
SLOVAKIA
Code No 5011976 Zb. Layout planning and documentation and building oryer
Code No 90/1998 Zz Constructionproducts (This law is based on the Construction Products Directive 89/106/EEC)
Standards
STN 73 0035
STN 73 6203
STN 73 0038
Actions on structures
Actionsonbridges
Design and assessment of building sWctures subjected to reconstruction
Foundations
STN 73 0031
STN 73 0033
STN 73 1000
Reliability of building constructions an foundation soils. Basic specificationsfor calculation

Reliability of structures and subsoils. ask requirements for action and effects
Foundations of buildings and structures. Basic design requirements
Loading
STN 73 0032
STN 73 0037
Calculation of building structures loaded with dynamic effects of machines

Earth pressure acting on structures
STN 73 0036
Seismic loading of building constructiohs
Steel structures
STN 73 1401
STN 73 1500

Steel structures. Basic requirements f i r calculation
STN 73 1590
Aluminium structures. Basic requirements for calculation
Concrete structures
STN 73 1201
Timber structures
STN 73 1701
STN 73 1206
Composite steeVconcretestructures. easic requirements for design

The following Eurocodes are in use in Slovakia:
Eurocode 1 Basis of design and action on structures

STN P ENV 1991-1
STN P ENV 1991-2-1
STN P ENV 1991-2-2
STN P ENV 1991-2-3
STN P ENV 1991-3
STN P ENV 19914

STN P ENV 1992-1-1
STN P ENV 1992-1-3
STN P ENV 1992-14
STN P ENV 1992-1-5
STN P ENV 1992-1-6
STN P ENV 1992-2
Eurocode 3 Design of steel structures

STN 73 1402
STN 73 1403
STN 73 1404
STN 73 6205
STN P ENV 1993-1-1
Design of light gauge cold-formed steel

Design of hollow sections In steel struct
Design of steel hydrotechnicalstructure
Design of steel bridge structures, etc.

STN P ENV 1994-1-1
Eurocode 6 Design of masonry structures

STN 731101
STN P ENV 19961-1
STN P ENV 19961-2
Eurocode 7 Geotechnical Deslgn

STN P ENV 1997-1
0 BSI 2002
July 2002
Eurocode 8 Design provisions for earthquakes and geotechnlcal aspects

STN P ENV 1998-1-1
STN P ENV 1996-1-2
STN P ENV 1998-1-3
STN P ENV 1998-2
STN P ENV 1998-5
Regulatory Body
Ministerstvo *stavby a regioalneho rosvoja Slovenskej republiky (MVRR 6R)
Ministry of Construction and Public Works
Spitalska 8
816 44 Bratislava
Notes
TSUS Civil Eng. Technical and Testing Institute

Studena 3
826 34 Bratislava
Slovakia
To register construction products:Ing. Rudolf Kyska Ph.D, Technical Director
Tel: +421 7 49228 120
Fax: +421 7 4445 3617
e-mail: kyska@tsus.sk
0 BSI 2002
July 2002
SLOVENIA
Zakon o graditvi objektov (Construction Law)
Official Gazette SFRJ no. 34/84 alterations SRS 29/86, SFRJ 83/89, SRSI 5/90, RS 10191
Loading
Rules on technical norms for the loading of loadbearing construction buildngs ((Uradni list SFRJ 52/85)
Rules on technical norms for the basing of buildings (Uradni list SFRJ 154 )
Rules on technical norms for defining the extent of loads on bridges (Ura ni lisr SFRJ 1/90)
Rules on technical norms for building constructions in seismic areas (Uradne list Officia Gazette SFRJ31/8l149/82, 29/83.21/88 in
52/90)
Steel structures
Rules on technical norms for load bearing steel structures (Uradnl list SF ,61/86)
Rules on technical regulations concerning dimension and form tolerances for load bearing steel structures (Uradni list SFRJ, 41/64)
Rules on technical regulations concerning quality of welds for load bearin steel structures (Uradni list SFRJ, 41/64)
Rules on technical regulations concerning lightweight steel constructions i load bearing steel structures (Uradni list SFRJ. 6/65),
Rules on technical regulations concerning inspection and testing of load b ring steel structures (Uradnl list SFRJ, 6/65)
Rules on technical regulations concerning simple building constructions i load bearing steel structures (Uradni list SFRJ, 6/65)
Rules on technical regulations for the actions of wind on loadbearing stee structures (Uradni list SFRJ 41/64)
Concrete structures
Rules on technical norms for concrete and reinforced concrete (Uradni lis SFRJ 11/87)
Rules on technical norms for concrete and reinforced concrete mixed with natural or artificial lightweight aggregate fill(Uradni list
SFRJ 15/90)
Rules on technical norms for the design, production and execution of structures with prefabricatedelements of non-reinforced and
reinforced from autoclaved aerated concrete (Uradni list SFRJ 14/89)
Standards
Timber structures'
SIST EN 380:1996
SIST EN 383: 1996
SIST EN 408 1996
SIST EN 409: 1996
SIST EN 594: 1996
SIST EN 595: 1996
SIST EN 596: 1996
SIST EN 789 1996
SIST EN 1059: 2000
SIST EN 1075: 2000
SIST EN 1193 2000
Timber structures Test methods G 'neral principles for static load testing
Timber structures Test methods D?termination of embedding strength and foundation values
Timber structures Structural timber ahd glued laminated timber Determinationof some
physical and mechanical propertles
Timber structures Test methods D&rminationa of the yield moment of dowel type fasteners
Nails
Timber structures Test methods
behaviour
panels
Timber structures Product requiremepts for prefabricatedtrusses using punched metal plate
fasteners
made with punched metal plate fastener
SIST EN 1194: 2000

SIST EN 1195: 2000
SIST EN 1380: 2000
SIST EN 1381: 2000
SIST EN 1382 2000
SIST EN 1383: 2000
SIST EN 26891: 1997
SIST EN 28970: 1997
density (IS0 8970:1989)
0 BSI 2000
Sep-00

The following Eurocodes are in use in Slovenia
ENV 1991
Basis of design and action on structures
SIST ENV 1991-1: 1998

SIST ENV 1991-2-1: 1998
SIST ENV 1991-2-3: 1998
SIST ENV 1991-2-4: 1998
SIST ENV 1991-3: 1991
ENV 1992
SIST ENV 1992-1-1: 1999
ENV 1993
SIST ENV 1993-1-1: 1996

SIST ENV 1933-1-1/Al:1996
SIST ENV 1993-1-2: 1999
ENV 1994
SIST ENV :994-1-1:1998
ENV 1995
SIST ENV 1995-1-1:1998
ENV 1998

Design for provisions for earthquakes and geotechnical aspects
SIST ENV 1998-1-1:2000

SIST ENV 1998-1-1:1995
SIST ENV 1998-1-2: 1995
SIST ENV 1998-1-3:1995
SIST ENV 1998-1-3:2000
SIST ENV 1998-1-4:2000
SIST ENV 1998-2:1995
SIST ENV 1998-5:1995
Regulatory Body
Ministry of Environment and Physical Planning
Dunuska cesta 48
SI-1000 Ljubljana
tel.: (+ 383) 1 478 7400
Fax: +386 2 478 7422
www.sigov.si/mop/
Notes
National Construction Inspectorate
Parmova 33, 1000 Ljubljana
1386 1 232 32 58
+386 1 231 08 40
Acting Chief Construction Inspector: Angelca Cepelnik
E-m4: angelca.cepeljnik@gov.si
The SIST EN documents are identical to their European counterparts.
SOUTH AFRICA
National Building Regulations Act No 103 of 1977, as amended
National Homebuilders RegistrationCouncil (NHBRC)
Home Building Manual Part 1: 1999 General Requirements
Home Building Manual Part 2 1999 Design Standards
Home Building Manual Part 3: 1999 Construction standards
Standards
Buildings
SABS 0400: 1990
SABS 0401: 1989
Foundations
SABS 0161 : 1980
Loading
SABS 0160 : 1989
Steel structures
SABS 0162 Part 3: 1984
SABS 0162 Part 2 1993
SABS 0162 -Part 1: 1993
Concrete structures
SABS 0100-Part 1: 1992
SABS 0100-Part 2: 1992
Masonry structures
SABS 0164: Part 1: 1980
SABS 0164: Part 2 1992
The application of the National Buildiqg Regulations

The construction of dwelling houses 14 accordance with the National Building Regulations
The design of foundations for buildin@
The general procedures and loadings,to be adopted in the design of buildings
The structural use of steel. Allowable tress design steelwork
The structural use of steel. Limit-sat4 design of cold-formed steelwork
The structural use of steel. Limit-state design of hot-rolled steelwork
The structural use of concrete. Design
The structural use of concrete. Materials and execution of work
The structural use of masonry. Unrein rced masonry walling

The structural use of masonry. Struct&l design and requirements for reinforced and
prestressed masonry
Timber structures
SABS 0163: Part 1: 1994
SABS 0163: Part 2: 1994
The structural use of timber. Limit-sta

The structural use of timber. Allowabl

A competent person such as someone registeredby the Engineering Cou)Icil may opt to use a foreign building design code thus
producing a relational design as defined in the terms of the National Builging Regulations.
Regulatory Body
Department of Trade and industry

Private Bag X84
Pretoria
South Africa
0001
Notes
National Home Builders Registration Council
P 0 Box 461
RANDBURG
2125
Tel: (011) 886 3636
Fax: (011) 781 214
Any innovative designs not referenced in the BuildingRegulations requirejapprovalfrom:Agrhent South Africa
CSlR
P 0 Box 395
PRETORIA
0001
Tel: (012) 841 370W3711
Fax: (012) 841 2539
0 BSI 2000
Construction Technology
Sep-00
TURKEY
Specificationfor structures to be built in disaster areas
Part 3 Earthquake Disaster Prevention
(Issued 2.9.97, Official Gazette No 23098 Effective from 1.1.1998 Amendk on 2.7.98. Official Gazette No 23390)
Standards
TS 1914: 1975 (IS0 2394: 1973
EQW
TS 8024: 1990
TS 9111: 1991
General principles for the verification of the safety of structures
General principles on reliability for s ctures List of equipment Terms

Specificationsfor designing residenti buildings for the disabled
Loading
TS 498.1987
TS 2968 1978 (IS0 2633: 1974
EQV)
TS 6793: 1989 (IS0 2103: 1986
EQV)
TS 7b46: 1989 (IS0 4355: 1981
EQV)
TS IS0 9194
Design loads for buildings

Determination of imposed floor load iri production buildings and warehouses
Loads due to use and occupancy in r+dential and public buildings

Determination of snow loads on roofs
Bases for design of structures; actionq due to the self weight of structures, non-structural
elements and stored materials; dansi*
See above
Steel structures
TS 648: 1980
TS 3357 1979
TS 4561: 1985
TS 11372:1994
Building code for steel structures

Building code for the design
Rules for plastic design of steel stru
Light weight steel structures
Concrete structures
TS 500 1984
TS 3233: 1979
TS 9967: 1992
Bulldlng code requireme

Building code requirements for pre-s
Design constructionand
elements structures and buildings
reinforced and pre-stressed concrete
Masonry structures
TS 2510: 1977
Design and construction methods for masonry
Timber structures
TS 647: 1979
TS EN 380
TS EN 1195
Building code for timber structures

Timber structures; test methods; gen
Timber structures Test methods P
principlesfor static load testing

rmance of structural steel floor decking

The following Eurocodes have been adopted in Turkey
ENV 1991
Basis of deslgn and actlon on s!tructures
TS ENV 1991-1: 1996

TS ENV 1991-3: 1996
TS ENV 19914: 1996
TS ENV 1991-2-1: 1996
TS ENV 1991-2-2: 1996
TS ENV 1991-2-3: 1996
TS ENV 1991-24: 1996
TS ENV 1991-2-6: 1997
ENV 1992
Deslgn of Concrete structures
TS ENV 1992-1-1 : 1996

TS ENV 1992-1-2+AC
TS ENV 1992-1-3: 1996
TS ENV 1992-14: 1996
TS ENV 1992-1-5: 1996
TS ENV 1992-2: 1996
ENV 1993
Deslgn of Steel structures
TS ENV 1993-1-1+Al: 1996

TS ENV 1993-1-2: 1996
TS ENV 1993-1-3: 1996
TS ENV 1993-14: 1996
ENV 1994
0 BSI 2000
Deslgn of composite steel and 4oncrete structures
Sep-00
TS ENV 1994-1-1: 1996

TS ENV 1994-1-2: 1996
ENV 1995
Design of Timber structures
TS ENV 1995-l-l+AC 1996

TS ENV 19951-2 1996
ENV 1996
Design of Masonry structures
TS ENV 1996-1-1: 1996
ENV 1997
Geo-technical Design
TS ENV 1997-1: 1996
ENV 1998
Design provision for earthquake resistance of structures
TS ENV 1998-2: 1996

TS ENV 1998-5: 1996
TS ENV 1998-1-1: 1996
TS ENV 1998-1-2: 1996
TS ENV 1998-1-3: 1996
TS ENV 1998-1-4: 1996
International Standards
IS0 2103: 1986
IS0 2394: 1973
IS0 2633: 1974
IS0 4355: 1981
Loads due to use and occupancy in residentid1and public buildings

General principles on reliability for structures
Determinationof Imposed floor
Bases for design of structures
Regulatory Body
Ministry of Public Works and Settlement
Necatibey Cad No. 63
Kizilay
Ankara
Turkey
Tel: +90 312 231 72 40
Fax: +90 312 418 04 06
TURKMENISTAN
SNIP 2.01.07-85
SNIP 11-7-81
SNIP 11-23-81
SNIP Ill-16-75
SNIP 2-03-01-84
SNIP 2-03-02-86
SNIP 2-03-03-85
SNIP 2-03-04-84
SNIP 2-06-0847
SNIP 11-22-81
SNIP 11-25-80
Loads and effects

Building in seismic zones
Steel structures
Metallic structures
Dense silicate plain concrete and rein rced concrete structures
wire fabric reinforced concrete
concrete structures for use at high temperatures
Deslgn manual for concrete and rein
for hydraulic Structures
Wooden structures
Standards
Loading
See above
See above
Steel structures
See above
Alumlnlum structures
See above
Concrete structures
See above
Masonry structures
See above
Tlmber structures
See above

Regulatory Body
Ministry of Construction and Building Materials of Republic of Turkmenistan
Ashgabad 744000
Alishera NAVO 1 , s
A 6 R224
Notes
Turkmenistandartlari
Republic of Turkmenistan
Ashgabad. 744000
A65l113
0 BSI 2001
Feb-Ol
UKRAINE
SNIP 2.01.07-85
SNIP 11-7-81
SNIP 11-23-81
SNIP ill-18-75
SNIP 2.03.06-85
SNIP 2.03.01-84
SNIP 2.03.02-86
SNIP 2.03.03-65
SNIP 2.03.04-84
SNIP 2.06.0887
SNIP 11-22-81
SNIP 111-2475
SNIP 11-2580
Loads and effects

Construction in Seismic areas
Steel structures
Metal structures
Dense silicate plain concrete and rein?ft rced concrete structures
wire fabric reinforced concrete
Design manual for concrete and reinforced concrete structures for the use at high and extremely
high temperatures
Concrete and reinforced concrete stru@~~res
for hydraulic facilities
Masonry and reinforced masonry strudtures
Wood structures
Standards
Loading
GOST 27751-88
Reliability of the constructlons and the foundations. Principle rules of the calculations
See regulations
Steel structures
ACTY 6 6.2.6-8-95 (GOST
3024594)
ACTY 6 6.2.6-9-95 (GOST
2404594)
Steel bent welded closed square and dectangular profiles for building structures. Specifications.
Steel sheet bent profiles with trapezoiq corrugations for construction purpose. Specifications
ACTY 6 6.2.6-3-95 (GOST
22233-93)
Extruded profilesof aluminium alloys fbr enclosure building structures. General specifications.
Concrete structures
ACTY 6 6.2.6-2-95
Reinforced concrete products. General technical requirements
Masonry structures
ACTY 6 6.2.781-97
ACTY 6 6.2.7-80-98
Brick and ceramic facing stone. Techdcal requirements

Brick and silicate bricks. Technical reqbirements
Tlmber structures
See regulations

Eurocodes are not valid in the Ukraine
Regulatory Body
TEXHI~HMAKOMITET CTAWPTM~A~IT
'SYATU(H0PMYBAHHFI'
Ylcpalna, 03141, ~.Kule-141,
N c 937
'Budtechnorm'
Notes
SNIP: Building regulations and rules of the former USSR. They are legal i Ukraine with some corrections (or without)
GOST: Standards in the former USSR. They are iegai in Ukraine with so4e corrections (or without)
ACTY: Government approved (national) standards
0 BSI 2000
sep-oo
UNITED STATES
International Bulldlng Code: 2000.
This new code supersedes the three former codes. It is effective immediately and only depends on adoption by the State
jurisdictions.
Chapter 16: Structural Design
Chapter 17: Structuraltests and Special Inspections
Chapter 1 8 Soil and Foundations
Chapter 19: Concrete
Chapter 20: Aluminium
Chapter 21: Masonry
Chapter 22: Steel
Chapter 23: Wood
Standards
ASCE 11-90
ASCE 24-98
Guideline for structural condition asse sment of existing buildings

Flood resistancedesign and construc$on standard
Loading
ASCE 7-98
AFBPNASCE 1695
AlSC LRFD (1993)
fad
Minimum design loads for buildings a d other structures

design (LRFD) for engineered wood construction
Standard for load and resistance
Load and resistancefactor design for structural steel buildings, including Supplement No. 1
Janl998
AlSC Seismic (1997)
Seismic Provisions for structuralsteel building including Supplement No 1 1999
AA-94
AA ASM 3580
Steel structures
AlSC ASD (1989)
AlSC HSS (1997)
AlSl(1996), ASCE 6-90
Structuralsteel buildings Allowable s ess design, plastic design

Specification for the Design of steel h llow structural sections
Specificationfor design of cold-form steel structural members
Concrete
ACI 318:1999 and commentary
ACI 318R-99
Aluminium Design manual: Part 1-A uminium structures, allowable stress design: and Part 1-8
Aluminium structures, Load and resi tance factor design of buildings and similar type
Structures
Aluminium sheet metal working In buiiqing construction
BuildingCode Requirements for Strudural Concrete
Masonry structures
ACI 530:99, ASCE 599. TMS
402-99
ACI 530.1-99, ASCE 699. TMS
602-99
Building code requirements for masoniy structures

I
Masonry structures
Timber structures
AFBPA NDS-97
AlTC 104-84
Wood constructionand supplement ,

Typical constructiondetails
ASCE 3-84
Standard for the structuraldesign of c+mposite slabs

None. The IBC is a prescriptive Code.
Regulatory Body
Department of Housing and Urban Development (HUD)s Federal Housind Administration (FHA)
a
0 BSI 2000
Sep-00
Notes
'The InternationalBuilding Code 2000 is a new Code which is designed to replace the three existing codes,namely:
1.Natlonal Bulldlng Code
BOCA The Building Officials and Code Administrators International
2.The Uniform Bulldlng Code
ICBO The InternationalConferenceof Building Officials
3.Standard Building Codes
SBCCl The Southern Building Code Congress International
The process of adoption by each state is in progress.
The lnternabional Building Code is a stand-alone document which coordinateswi all the other 2000 InternationalCodes including:
InternationalPlumbing Code(tm) (IPC). the InternationalPrivate Sewage Disposal Code(tm) (IPSDC) the International Fire Code,
and the InternationalMechanicalCode(tm) (IMC)
to create a set of comprehensive performance-based guidelines for the design an4 installation of building systems.
Regulatory requirements for building are very localized in the US. Local reguiatiods are based on the Model Building Code (lac).
For code compliance contact:ICBO EvaluationService
Tel: (800) 423-6587
Fax: (562)6954694
e-mail: es@icbo.org
AA Aluminium Association
900-1p Street NW, Suite 300
Washington, DC 20006
AFBPA American Forest and Paper Association
1111 1SmStreet. NW Suite 800
AlSl American Iron and Steel Institute
1101 lp Street, NW, Suite 1300
ACI American,ConcreteInstitute
PO Box 9094
Farmington Hills. MI 48333-9094
URUGUAY
lntendencia Municipal de Montevideo
Municipal Digest. Title Ito XIV. Article R 1.625 include refers to building r6guilations
Standards
Loading
Wind actions on structures
UNIT 50
Earthquake reslstance
None
Steel structures
American Standards always
used.
Concrete structures
Execution of reinforced concrete
Project and executionof concrete or rdnforced concrete structures (Public enquiry)
UNIT 104
PU 1050: 2000
Masonry structures
No codes or technical standards
Timber structures
No codes or technical standards

DIN 1045
CIRSOC 201
1984)
ACU 318
Structural use of concrete Design and construction Germany)

Design, calculation and execution of reinforced concr te and pre-stressing concrete structures. (Argentina
Building code. Requirementsfor reinforced concrete (USA)
Regulatory Body
Ministerio de Wienda, Ordenamiento Territorial y Medio Ambiente
Zabala 1432 Montevideo
Uruguay
Tei: +598 2 916 59 26/28
Fax: +598 2 916 59 26/27
0 BSI 2001
Aug-Ol
UZBEKISTAN
SNIP 11-7-81
SNIP 22-01-96
SNIP 2.01.1590
SNIP 11-23-81
SNIP 111-1875
SNIP 2.03.06-85
SNIP 2.03.01-84
SNIP 2.03.02-86
SNIP 2.03.03-85
SNIP 2.03.04.84
SNIP 11-22-81
SNIP 111-24-75
SNIP 11-25-80
KMK 2.01.09-97

Geophysics of dangerous natural influences
Engineeringprotection of territories, buildings\ structures from dangerous geological processes.
Basic design rules.
Steel structures
Metal structures
Concrete and reinforced concrete structures
Dense silicate plain concrete and reinforced doncrete structures
Design manual for concrete and reinforced concrete structures for the use oat high and
Wood structures
Temporary building constructions in gardens and relocatable cabins for builders
Standards
Loading
GOST 23337-78 (CTC3B 260080)
KMK 2.03.10-96
KMK 2.06.04-97
KMK 2.01.07-97
Noise. Methods of noise measurement in residential areas and in the rooms of residential, public
and community buildings
Roofs and a roofing
Loadings and influences on hydraulic engineering tests of a construction (wave, ice and from
Courts)
Loadings and influences
KMK 2.01.OS96
PCTY3 836-97
KMK 2.01.01.94

The Scale for definition of intensity of earthquake in limits from 6 up to 10 points
Building climatic conditions and geophysics
Steel structures
KMC 21.I
5.004-96
GOST 23682-79
GOST 24045-94
GOST 26047-83
KMK 2.03.1 1-96
KMK 2.03.0597
Metal products. General specifications.

Steel stepped columns for buildings with genqral purpose travelling electric cranes having loadcarrying capacity up to 50 t. Specifications
Steel sheet cold-formed sections with trapezdidal corrugations for building. Specifications
Steel building structures. Conventional signs (grades)
Protectionof building designs against corrosibn
Steel designs. Norms of designing
GOST 22233-93
GOST 24767-81
KMK 2.03.0697
Extruded profiles of aluminium alloys for enclqsure building structures. General specifications
Cold bent Drofiles of aluminium and aluminium allovs for enclosure buildina structures.
Specifications
Aluminium structure designs
Concrete structures
GOST 13015.0-83
KMK 2.03.04-98
KMK 2.06.08-97
KMK 2.03.01-96
KMK 2.03.02-96
KMK 2.03.09-98

the Concrete and ferro-concrete designs intended for work in conditions of influence of raised
(increased) and high temperatures
Concrete and ferro-concrete designs of hydrablic engineering constructions
Concrete and ferro-concrete designs
Concrete and ferro-concrete designs from dense silicate concrete
Asbestos- cement designs
Masonry structures
KMC 21.60.01-00
GOST 24992-81
CT C3B 4417-83
KMK 2.03.07-98
Bricks and ceramic stones

Masonry structures. Method of estimating bo
Masonry structures. Reliability of design and
. Stone and designs Masonry structures
Timber structures
GOST 4981-87
KMK 2.03.08.98
Wooden joists
Wooden design structures
Eurocodes are not acceptable in Uzbekistanalthough there are plans to accept dritish, US and German Standards in the future.
0 BSI 2002
July 2002
Regulatory Body
Gosarhitektstroj of Republic of Uzbekistan.
70001 1, Tashkent,. Abaja street, 6,
Tel: + 3712 144-07-00
Notes
SNIP documents are building regulations and standards from the former USSR.GOST- standards are from the former USSR. They
continue to be used in Uzbekistan both with and without changes.
KMC standards are state standards of Uzbekistan Republic.
0 BSI 2002
July 2002
VANUATU
NationalBuilding Code 2000
This is not a law but outlines performance requirements and 'Deemed-to-gatisfy Provisions'.
The code was written in response to the significantthreat of death and de$tructionthat cyclones pose for Vanuatu every summer.
The following Standards are ated in the Code.
Standards
Loading
AS 1170-2
With local applications
Minimum design loads on structures ($AA Loading code) Part 2: Wind loads
NZS 4203 Part 1,2.3
With local applications
General structural design and design Ibading for buildings
Steel structures
NZS 3404
Steel structures standard
ASlNZS
Concrete structures
NZS 3101 PARTS 1&2:1995
NZS 3109:1997
NZS 31241987
The design of concrete structures

Concrete construction
Specification for concrete constructions for minor works
Masonry structures
NZS 4210:1989
NZS 4229:1999
NZS 4230
Timber structures
AS 1720
NZS 3603

Timber structures standard

French, British, Australian and New Zealand are the main foreign Standaas specified in contract documentation.
Regulatory Body
The Building Code was developed by a number of Government Ministries
Notes
Vanuatu is subject to cyclones
0 BSI 2000
Sep-00
VIETNAM
Vietnam construction code
Construction Quality management regulation
Standards
Loadlng
TCVN 2737: 1995
Loads and actions. Design standard [Mandatory Standard)
Earthquakeresistance
Buildingon the earthquake regions Oesign standard (Under the writing process)
Steel structures
TCVN 5575:1991
TCXD 170:1989
Steel structures. Design standard l!jOt!(A4)
Steel structure Technical requlrem~t

for errection and acceptance
None listed
Concrete structures
TCVN 411885
TCVN 4452-87
TCVN 4453:1995
TCVN 5574:1991
TCVN 51241993
TCVN 6285: 1997 (IS0 6935'2)
Maaonary structures
TCVN 5573:1991
TCVN 4085:1985
limber structures
TCVN 46101988
Other
TCVN 4088-97
TCVN 409185
TCVN 4252-86
TCVN 4448-87
TCVN 4449-87
TCVN 445087
TCVN 4451-87
TCVN4454-87
Hydraulic engineering concrete and inforced concrete structures. Design standard

Precastconcrete and reinforced con?rete structures. Code for e x d o n and acceptance
2otr(A4)
Monolithic concrete and reinforced 4ncrete structures. Code for e x d o n and acceptance
50tr(M)
Concrete and reinforcedconaete s ctures. Design standard 96qA4)
Concrete and reinforcedconcrete sqctures. Minimum technical conditions for e x d o n and
acceptance
Steel for the reinforcement of concretb. Ribbed ban. (Mandatory Standard)
Brick and stone and reinforeed brick nd stone structures. Design standard 68qA4)
Mansonary structure Spdcation dr constrctionand acceptance
Timber structure Technical requirementfor design

Climatic data for constntction design
Acceptance of buildings WA5)
Procedurefor design, organization a d execution in conshction
Guide for dkttict center planning
Design standard 25qA4)

If there are no Vietnamese Standards available Standards from the foliowfng country are accepted:
US, Europe, ISO, Australia. UK, France, Germany, Russia
The Ministry of Construction should a h y s be consulted before using fo ign standards for the following mandated a m :
Safety of construction. loadingand actions on structures. and envimnme?t
Regulatory Body
Department of Sdence and Technology
37 Le Dal Hanh. Hanoi, Vietnam
Tel: 844-976075518215662
Fax: 84489780676
Email: dstmoc@hn.vnn.vn
0 BSI 2002
Jan-2002
APPENDIX i
LIST OF WORLD-MDE STANDARlDS ORGANIZATIONS

ALBANIA@PS)
General Directorate of Standardization
Mine Peza Str. Nr 14313
PO Box 98
Tirana
+ 355 42 2 62 55
Tel:
+ 355 42 471 77
Fax:
E-mail: dscQicc. al.eu.org
ALGERIA (IANOR)
Institut alghien de normalisation (IANOR)
5 , rue Abou Hamou Moussa
(es-rue Daguerre)
B.P. 104RP
Alger
Tel:
+2 13 2 64 20 75
Fax:
+2132641761
Email: ianor@,Wssal.dz
ANTIGUA AND BARBUDA (ABBS)
Antigua and Barbuda Bureau of Standards
P.O. Box 1550
Redcliffe Street
St. Johns
Tel: +1268 462 15 42
Fax: +1268 462 16 25
E-mail: abbs@candw.ag
ARGENTINA
Instituto Argentino de Normalizacion
Peru 5521556
1068 Buenos Aires
A U S W I A (SAI)
Standarh Australia International Ltd
286 S w e x St (corner of Bathmt St)
Sydney, NSW 2000
Postal Address
GPO. Bbx 5420
Sydney;-NSW. 2001
Tel:
+612 82 06 60 00
Fax:
+612 82 06 60 01
E m d . , htsect@standards.com.au
A U S T (ON)
OsterreichischesNormungsinstitut
Heinesaasse 38
Postfacl4 130
A-1021Wien
Tel:
+43 1 213 00
+43 1 21 30 06 50
Fax:
Email: elisabethstampfl-blahaaon-normat
AZERBlAIJAN (AZGOST)
Azerbaijan State Standardization and Metrology
Centre
Mardaubv Gardashlary,124
370074d Baku
+99 412 40 51 54
+99 412 40 37 98
E-mail aRundov@azerin.com
Tel:
Fa:
http:llwww.iram.org.arlhome-es.htm
BAWMD)
Directomte of Standards and Metrology
minis try^ of Commerce
P.O. Bod 5479
Bahrain
Tel:+54 11 43 46 06 02
Fax: +54 11 43 46 06 05
E-mail: iram-iso@iram.org.ar
Tel:
+ 973 52 30 30
Fax:
+ 973 53 07 30
Email: bsmdQbaTe1:co. com.bh
ARMENIA(SARM)
Department of Standardization,Metrology and
Certification
Komitas Avenue 4912
BANGLDESH (BSTI)
Bangladesh Standards and Testing Institution
1161A, $ejgaon Industrial Area
Dhaka 1308
375051 Yerevan
Tel: +374 1 23 56 00
Fax: +374 1 28 56 20
Email: sarm@sarm.am
Tel:
+ 880 2 88 14 62
Fax:
+ 880 2 91315 81
Email: bstiQbangla.net
JANUARY 2002
LIST OF WORLD-MDE STMDAR.@S ORGANIZATIONS

BARBADOS (BNSI)
Barbados National Standards Institute
Flodden Culloden Road
St. Michael
Tel:
+1246 426 38 70
Fax:
+1 246 436 14 95
Email: office@bnsi.com.bb
BELARUS (BELST)
Committee for Standardization,Metrology and
Certification
StarovilenskyTrakt 93
Minsk 220053
Tel:
+375 172 37 52 13
+375 172 37 25 88
Emaik belgiss@)ail.belpak.by
Fax:
AND HERZEGOVINA (BASMP)

Standardization,Metrology and
Patents I
71000 darajevo
Tel:
+387 33 65 27 65
Fax:
+387 33 65 27 57
Email: zsmp@bih.net.ba
B O T S ~ A N A(BOBS)
Botswaxpa Bureau of Standards
Plot No. 14391, New Lobatse Road
Gaboro$e West Industrial
Private bag BO 48
Gaborane
Tel:
+267 56 40 44
Fax:
+267 56 40 42
E-mail: infoc@hq.bobstandards.bw
BELGIUM (IBN)
Institut belge de normalisation
AV.de la Brabanqonne 29
B- 1040 Bruxelles
Tel:
+32 2 738 01 11
Fax:
+32 2 733 42 64
Email: voorhof@ibn.be
B
q (AB)
Associ ao Brasileira de Normas T6cnicas
AV.13 e Maio, no 13,28O andar
20003-600 Rio de Janeiro-RJ
3--
Tel:
+552139742300
Fax:
+55 21 22 20 17 62
Email: abnt@abnt.org.br
I
BENIN (DPQC)
Direction de la Promotion de la Qualite et du
Conditionnementdes Produits
MA
Ministere du developpementRural
B.P. 362
Cotonou
Tel:
+229 31 22 89
Fax:
+229 31 53 76
Email: cebenor@intnet.bj
Planning and Research Unit

Brunei Darussalam
Tel:
+673 2 38 10 33
Fax:
+673 2 38 IS 41
Email: modcpru@brunet.bu
BOLIVIA (IBNORCA)
Instituto Bolivian0 de Nonnalizaci6n y Calidad
AV.Camacho Esq. Bueno No 1488
Casilla 5034
La Paz
6th Sept/ember Street

1000 Sdfia
Tel: +5912 241 90 38

Fax: +5912 241 82 62
Email: ibnorcadceibo.enTel:net. bo
Tel:
+359 2 989 8488
Fax:
+359 2 986 1707
E-mail: mail@sasm.orbiTel:.bp;
and Metrology 2 1,
JANUARY 2002
LIST OF WORLD-MDE STANDARlpS ORGANIZATIONS

BURUNDI(BBN0)
Bureau b m d a i s de normalisation et de contr6le de
la qualitk
25, rue de la Victoria
B.P. 3535
Bujumbura
Tel:
Fax:
+257 22 15 77
+257 22 18 15
+56 2 441 03 30
Tel:
Fax: ,+56 2 441 04 27
Emaik inn@enTel:chile.net
BURKINA FASO (FASONORM)

Direction de la Normalisation et de la promotion de
la Qualite
Office National du Commerce Exterieur
B.P. 389
Ouagadougou 1
CHINAi (CSBTS)
China S h e Bureau of Quality & Technical
Superviqion
4, Zhi Chun Road, Haidian District
P.O.Bo% 8010
Beijing LOO088
Tel: +226 33 33 82
Fax: +226 31 14 69
E-mail: fasonorm@fasonet.bf
+ 86 10 62 00 06 75
Tel:
+86 10 62 03 37 37
,Fa:
E-mail: sacs@mail.csbts.cn.net
CAMBODIA ( I S C )
COLOl$lBIA (ICONTEC)
InstitutoiColombiano de N o m T6cnicas y
Certificdcion
Carrera 87 No. 52-95, Edificio ICONTEC
P.0 Box 14237
Bogota
Ministry of Industry, Mines and Energy

Department of Industrial Techniques
Industrial Standards Bureau
45, Norodom Blvd
Phnom Penh
+855 12 92 95 22
Tel:
+855 23 98 23 03
Fax:
Email: isc@bigpond.com.kh
CHILE4(INN)
InstitutoNacional de Normalizaci6n
Matib Cousin0 64-6O piso
Casilla 995 - Correo Central
Santiago
CAMEROON (CCNQ)
Cellule de la Normalisation et de la Qualite
Ministere du developpement industriel et
commercial.
Direction du developpement industriel
Yaounde
Tel:
+237 22 11 20
Fax:
+237 22 95 86
Email: mindic.coop@camnet.cm
+57 1 315 03 77
+57 1 222 14 35
Email: isocol@icontec.org.co
Tel:
Fax:
et de l'artisanat
B.P 474'
Moroni
Tel:
Fax:
+269 74 42 32
.+269 73 01 44
Email: minieco@snpt.km
CANADA (SCC)
Standards Council of Canada
270 Albert Street, Suite 200
Ottawa, Ontario KlP 6N7
CONGC), DEMOCRATIC REPUBLIC OF THE

Office qongolais de Controle (OCC)
98 Aven' e du Port
B.P.880,
KinshasblGombe
+1 613 238 32 22
+1 613 569 78 08
Email: info@scc.ca
Tel:
+ 243 88 051 27
Fax:
+243 12 219 74
Email: occ-dir@ic.cd
Tel:
Fax:
6!l
JANUARY 2002
LIST OF WORXD-WIDE STANDARDS ORGANIZATIONS

COSTA RICA (INTECO)
Instituto de Normas T6cnicas de Costa Rica
Barrio G o d e z Flores
Ciudad Cientifica de la Universidad de Costa Rica
San Pedro de Montes de Oca
San Jose
Tel:
+506 283 45 22
Fax:
+506 283 48 31
Email: cmdriguez@inteco.or.cr
COTE-dIVOIRE (CODINORM)
Cote dIvoire - Normalisation
Angle Bd Botreau RousseYRue du Commerce,
5e Et. Immueble LE GENERAL
Plateau, 01 BP 1872
Abidjan
Tel:
Fax:
CROATIA (DZNM)
State Office for Standardization and Metrology
Ulica gradaVukovata 78
10000 Zagreb
Fax:
,+420 2 21 80 21 11
Tel:
.+420 2 21 80 23 11
Fax:
Email: ! internat.dept@csni.cz
Kollegiv
DK-292 Charlottenlund
+45 39 96 61 01
Tel:
Fax:
+45 39 96 61 02
Email: dansk.standard@ds.dk
+225 20 2155 12
+225 20 21 56 11
Email codinorm@africaonline.co.ci
Tel:
C Z E d REPUBLIC (CSNI)
Czech Sbndards Institute
+385 16106320
+385 1 610 93 20
D O W I C A (DBOS)
Dominiqa Bureau of Standards
28 Kennj=dyAvenue, First Floor
Tel: +O 1767 448 16 85

Fax: +O 1 767 449 92 17
E-mail: standards@cwdom.dm
Email: wed. ravnaTel:ja@dznm.hr
CUBA(Nc)
Oficina Nacional de Normalizacih
Calle E No 261 Entre 11 y 13
Vedado
La Habana 10400
Tel:
+53 7 30 00 22
Fax:
+53 7 33 80 48
Email: ncnorma@ceniai.inf.cu
CYPRUS (CYS)
Cyprus Organization for Standards and Control of
Quality
Ministry of Commerce, Industry and Tourism
Nicosia 1421
Tel:
+ 357 2 86 71 90
Fax:
+357 2 75 41 03
Email: mcicys@cytanet.com.cy
D O W I C A N REPUBLIC
Direccio General de Normas y Sistema
de Calid L
Edificio be Oficinas Gubemamentales
Juan Pablo Duarte, Piso 11
Santo Dbmingo
Tel:
.+l
809 686 22 05
Fax:
+1 809 688 38 43
Email: xligenor@codeTel:.net.&
ECU~OR
@YEN)
InstitutcEcuatorianode Normalizacion
Calle BAuerizo Moreno 454 y
Almagrd, Edificio INEN
PO BOXj 17-01-3999
Quit0
Tel:
+593 22 56 56 26
Fax:
+593 2 56 78 15
Email: hen 1@hen.gov.ec
JANUARY 2002
LIST OF WORLD-WIDE STANDARDS ORGANIZATIONS

EGYPT (EOS)
Egyptian Organization for Standardization and
Quality Control
16 Tadreeb El-Modarrebeen St
El-Ameriya
Cairo
Tel:
Fa:
E-mail:
+202603 1349
+2022593480
+503 226 28 00
Tel:
Fax:
+503 225 62 55
Email: evanegas@conacyt.gob.sv
ESTONIA (ESK)
Eesti Standardikeskus
10, Aru Street
10317 Tsllinn
Tel:
+ 372 605 50 50
Fax:
+372 605 50 70
Email: info@evs.ee
ETHIOPIA (QSAE)
Quality and Standards Authority of Ethiopia
P.O. Box 23 10
Addis Ababa
+ 251 146 05 25
Tel:
+251 1 46 08 80
Fax:
Email: qsae@Tel:ecom.net .et
FIJI (FTSQCO)
Fiji Trade Standards and Quality Control Office
Ministry of Commerce, Business Development and
Investment
Naibati House
P 0 Box 2118
Suva
+358 9 149 93 31
Tel:
+358 9 146 49 25
Fax:
Email: sfs@sfs.fi
moi@idsc.net.eq
EL SALVADOR (CONACYT)
Consejo Nacional de Ciencia y Tecnologia
Colonia Medica
Ave. Dr E. Alvarez y Pje
Dr Guillermo Rodriguez No 5 1- Edificio Espinoza
FINLAND (SFS)
Finnish Standards Association SFS
P.O. Boqr 116
FIN-OOi41 Helsinki
Tel:
+679 30 54 11
Fax:
+679 30 26 17
Email: hwong@govnet.gov.fi
FRANCE (AFNOR)
Associat$on h q a i s e de normalisation
Tour Eutope
F-92049 Paris La Defeme Cedes
Tel: + 33 1 41 62 80 00 /+33 1 41 62 81 95
Fax: +33 149 17 90 00
E-mail: uari@ahor.fr
GE-(Dm
DIN De tsches Institut furNormung
Burg4nstrasse 6
D-1078 Berlin
Postal Avdress
D-10772,Berlin
Tel:
+49 30 26 01-0
+49 30 26 01 12 31
Fax:
Email: :directorate.htemational@dixI.de
GHANA (GSB)
Ghana Sbdards Board
PO Box k 245
Accra
Tel:
Fax:
+233 21 50 00 65
+233 21 50 00 92
Email: 'gsblib@ghana.com
GREEqE (ELOT)
Hellenic;Organizationfor Standardization
3 13, Acdarnon Street
GR-11145 Athens
Tel:
+30 1 21 20 100
Fax:
+30 121 20 131
Email: elotinfo@elot.gr
GREN A(GDBS)
Grenada Bureau of Standards
Lagoor oad
St. Geo&e's
Tel:
+ 1 473 440 58 86
+ 1 473 440 5554
Fax:
Email: gdbs@caribsurf.com
JANUARY 2002
LIST OF WORLD-MDE STANDARDS ORGANIZATIONS
GUATEMALA (COGUANOR)
Comision Guatemalteca de Normas
8a Avenida 10-43, Zona 1
Guatemala
HUNGARY (MSZT)
Magyar Szabvhyiigyi Testulet
mSi ut 25
Pf. 24
H-1450 Budapest 9
Tel:
+502 238 33 30 Ext. 1703
+502 238 330 Ext. 1775
Fax:
Email: mbeteta@mail.mineco.gob.gt
Tel:
+36 1 456 68 00
Fax:
+36 1456 68 23
Email: isolineQmszt.hu
GUINEA(INNM)
Institut national de normalisation et de metrologie
Ministere de la promotion du secteur prive, de
l'industrie et du commerce
B.P. 1639
CO*
I C E L W (STIU)
Icelandid council for Standardization
Laugavegur 178
IS-105Reykjavik
Tel:
+224 41 28 16
Fax:
+224 41 39 90
Email: inm@soTel:fi .net.gn
Tel:
+354 520 7150
Fax:
+354 520 7171
Email: stadlar@stadlar.is
INDIA @Is)
GUYANA (GNBS)
Guyana National Bureau of S t a n d &
Flat 15, Sophia Exhibition Complex
sophia
Greater Georgetown
Tel:
+592 2 590 41
Fax:
+592 2 574 55
Email: gnbsQsdnp.org.gy
HONDURAS (COHCIT)
Consejo Hondureno de Ciencia y Tecnologia
Colonia Alameda
Avenida Julio Lozano Diaz, cas8 No. 1354
Tegucigalpa
Postal Address
Aparatado Postal 4458
Bureau qf Indian Standards

Man& ghavan
9 Bahad$r Shah Zafar Marg
New D e w 110002
Tel:
+91 11 323 79 91
Fax:
+91 1 1 323 93 99
E-mail: bisird@vsnl.net
INDO sIA(BsN)
Badan S dardisasi Nasional
(Nation StandardizationAgency of Indonesia)
manggal wanabakti Blok 4,
4" Floor JI. Jenderal Gatot Subroto, Senayan
Jakarta 110270
+62 21 574 70 43
,+6221 574 70 45
Email: /bsn@bsn.or.id
Tel:
Tel:
+504 232 56 59
Fax:
+504 239 66 09
Email: cincano@cohcit.gob.hn
Fax:
HONG KONG, CHZNA (ITCHKSAR)

Innovation and Technology Commission
36E Immigration Tower
7 Gloucester Road
wan chai
Hong Kong
IRAN,$LAMIC REPUBLIC OF IRAN (ISIRI)

Institute bf Standards and Industrial Research of Iran
P.O. Bod 14155-6139
IR-Tehnan
Tel:
+ 98 261 280 60 31-8
Fax:
Tel:
+852 28 29 48 67
Fax:
+852 28 24 13 02
Email: psib@itc.gov.hk
+98 261 280 50 15

Email: standard@isiri.or.ir
JANUARY 2002
LIST OF WORLD-WDE STANDARDS ORGANIZATIONS
'
IRA0 (COSQC)
Cen&'Org&tion
for Standardizationand
Quality Control
Council of Ministers
P.O.Box 13032
AL-Jaderiya
Iq-Baghdad
JAPAN (JISC)
Japanesk Industrial Standards Committee
Department
d o S&ds
Minisq of International Trade and Industry
1-3-1, &mmigaseki, Chiyoda-ku
Tokyo 100 8901
Tel:
+81 3 35 01 94 71
Fax:
+81 3 35 80 86 37
Email: isojisc@meti.go.jp
'
Tel: +964 1 778 05 95

Fax: +964 1718 73 51
E-mail: cosqc@uruklinlc.net
IRELAND ( N S A I )
National Standards Authority of Ireland
Glasnevin
Dublin-9
Tel:
+353 18073800
+353 1 807 38 38
Fax:
Email: nsai@nsai.ie
Tel:
+962 6 568 01 39
+962 6 568 10 99
Fax:
Email: jism@nic.net.jo
Fax:
KAZAIbSTAN (KAZMEMST)
Commit)ee for Standardization,Metrc.Jgy and
Certification
Pushkin,str166/5
473000 h a n a
Tel: t7 3 17 2 39 50 84
Fax: +7 317 2 39 50 66
E-mail: kazinst@memst.kz
ITALY m n
Ente Nazionale Italian0 di Unificazione
Via Battistotti Sassi 1l/b
1-20133 Milano
KENYA WEBS)
Kenya gureau of Standards
Off MoIfibasaRoad, Behind Belle Vue Cinema
P.O.Box 54974
Nairobi'
+39 2 70 02 41
Tel:
+39 2 70 10 61 49
Fax:
Email: uni@uni.com
Tel:
+ 254 2 50 22 10/19
Fax:
+ 254 2 50 32 93
Email: kebs@users.africaonlhe .Co.ke
JAMAICA (JBS)
Jamaica Bureau of Standards
6 Winchester Road
P.O.Box 1 13
Kingston 10
C o d e for Standardization of the Democratic

People' Republic of Korea
Zung GS Yok Seungli-Street
ISRAEL (Sn)
Standards Institution of Israel
42 Chaim Levanon Street
Tel: Aviv 69977
Tel:
+972 3 646 51 54
+972 3 641 96 83
Email: iso/iec@sii.org.il
JORDAN (JISM)
Jordan Ihstitution for Standards and Metrology
P.O.Bob 941287
Amman 11194
Tel:
+ 1 876 926 31 40-7
Fax:
+1876 929 47 36
E-mail: info@jbs.org.jm
Tel:
Fa:
+85 02 57 15 76
+85 02 381 44 80
JANUARY 2002
-~
~~
LIST OF WORLD-W D E STANDARd)S ORGANIZATIONS

KOREA, REPUBLIC OF (KATS)
Korean Agency for Technology and Standards
Ministry of Commerce, Industry and Energy
2 Joogangg-dong, Kwanchon-city
Kyonggi-do 427-010
Tel:
+82 2 509 73 99
+82 2 503 79 77
Fax:
Email: standard@ats.go.kt
LIBYAey ARAB JAMAHIRWA (LNCSM)

Libyan National Centre of Standardizationand
Metrolagy
Industrial Research Centre Building
P.O.BOK5178
Tripoli '
Tel:
+218 21 369 3074
Fax:
+218 21 369 3071
E-mail: lncsm90@yahoo.com
KUWAIT (KOWSMD)
Public Authority for Industry
Standards and Industrial Services Affairs
Standards and metrology Department
Post Box 4690 Safat
13047 Kuwait
LESOTHO (LSQAS)
Standarb and Quality Assurance Section
Ministry of Industry, Trade and Marketing
PO Box 747
Maseru 100
Tel:
+965 43 1 84 5 1
Fax:
+965 431 81 59
Email: kowsmd@pai.gov.kw
Tel:
+266 31 28 02
Fax: , +266 3 1 03 26
E-mail: lessqa@leo.co.ls
KYRGYZSTAN (KYRGYZST)
State Inspection for Standardizationand
Metrology
197 Panfilova Str
720040 Bishkek
LITW/4NIA (LST)
L i t h q a n StandardizationBoard
T. Kosc uskos g. 30
2600 V i u s
Tel:
+996 31 2 22 78 84
Fax:
+996 31 2 66 13 67
Email: gostQkmc.bishkek.gov. kg
Tel:
+370 2 70 93 60
Fax:
+370 2 22 62 52
Email: , lstboard@lsd.lt
LATVIA (LVS)
Latvian Standards
157, Kr. Valdemara Street
1013 Riga
LUXE~URG
(SEE)
Service , e 1'Energie de 1'Etat (SEE)
Organisline luxemburgeoise de Normalisation
34, avenbe de la Porte-Neuve
BPlO
L-2010 Luxembourg
'
Tel:
+371 7 37 13 08
Fax:
+371 7 37 13 24
Email: Ivs@lvs.lv
Tel:
+352 46 97 46 1
'+352 46 97 46 39
Email: isee.normalisationQeg.etat.lu
Fax:
LEBANON (LIBNOR)
Lebanese Standards Institution
Gedco Centre 3, Bloc B, 10th Floor
Shehab AV,between Mkalles & Hayed
Sin El-Fil-Dekwaneh
Beirut
Postal Address
P.O. Box 55 120
Sin El Fil
Beirut
+961 1 48 59 27
Tel:
+961 1 48 59 29
Fax:
Email: 1ibnorQcnrs.edu.lb
Transfer Center
Edificio Associaqao Comercial de Macau 6Oandar
MO- Mgcau
Tel: +853 781 313
Fax: +453 788 233
E-mail: : cpttm@cpttm.org.mo
JANUARY 2002
LIST OF WORLD-WIDE S T M D m S ORGANIZATIONS
MADAGASCAR (BNM)
Bureau de Normes de Madagascar
B.P. 1316
Antanamrivo 101
MAURITIUS (MSB)
Mauritids Standards Bureau
Villa Lane
Mob
Tel:
Fax:
Tel:
+230 43 33 648
Fax:
+230 43 35 150
Email: msb@intnet.mu
+26120 22 238 60
+26120 22 264 26
MALAWI (MBS)
Malawi Bureau of Standards
PO Box 946
Blantyre
Tel:
+265 67 04 88
Fax:
+265 67 07 56
Email: mbs@malawi.net
MALAYSIA @SM)
Department of StandardsMalaysia
Ministry of Science, Technology & the Environment
of Malaysia
Level 1 & 2, Block C4, Parcel C
Federal Government Administrative Centre
MY-Putrajaya 62502
+ 60 3 55 19 80 33
Tel:
Fax:
+60388885060
Email: central@dsm.gov.my
MExIcp @GN)
Direcci6p General de Normas
Calle Puente de Tecamachalco No 6
Lomas de Tecamachalco
Secci6n Fuentes
Naucalp de Jdrez
53950 exico
Tel:
+52 55 5729 94 80
Fax:
+52 55 57 29 94 84
E-mail: cidgn@economia.gob.mx
MOLDQVA, Rep. of (MOLDST)

Department of Standards, Metrology and Technical
Supervision.
Str. Coca 28
MD-or. Chisinau 2064
Tel:
Fax:
+373 2 74 85 88
+373 2 75 05 81
Email: moldovastandard@smdiUt..mldnet.com
MALTA (MSA)
Malta StandardisationAuthority
206Floor, Evans Building
Merchants Street
VallettaVLT03
Tel:
+356 24 24 20
Fax:
+356 24 24 06
Email: info@msa.org.mt
MALI(MLIDNI)
Direction Nationale des Industries
Boite postale 278
Centre commercial
Rua Famolo Coulibaly, pork 152
Bamako
Tel:
+223 22 06 63
Fax:
+223 22 61 37
Email: dnin@datasch.toolnet.org
MONWLIA (MNCSM)
Mongolib National Centre for Standardization and
Metrology
PO Box 48
Ulaanbdatar-51
+976 11 45 83 49
Tel:
+976 1145 80 32
Fax:
Email: mncsm@magicnet,mn
MORO CO(SNIMA)
Service e normalisation indusmelle marocaine
Ministet.edu commerce, de lindustrie et lartisnat
Angle A h u e A1 Film et rue Dadi Secteur 21 Hay
Riad
10100
bat
Tel:
+ 212 37 71 62 14
Fax:
+2123771 1798
Email: pnima@mcinet.gov.ma
JANUARY 2002
LIST OF WORLD-W D E S T M D D S ORGANIZATIONS
National Institution of Standardizationand Quality

C.P. 2983
Maputo
NICARAGUA (DGCYT)
Direccign General de Ciencia y Tecnologia
Ministefio de Foment0 y Desarollo
Apartaq postal No 8
Managua
+258 1 30 38 22
Tel:
+258 1 30 36 58
Fax:
Email: hnoq@emilmoz.com
+ 505 2 67 01 61 Ext. 1032

Tel:
Fax: +505 2 67 20 19
E-mail &m@mific.gob.ni
MOZAMBIQUE (INNOQ)
NAMIBIA (NSIQO)
Namibia Standards Information and Quality Office
Ministry of Trade and Industry
Goethe Street, Private Bag 13340
Wmdhoek
+264 61 283 71 11
Tel:
+264 61 22 02 27
Fax:
E-mail: ndishishi@mti.gov.na
NEPAL (NBSM)
Nepal Bureau of Standards and Metrology
P.O. Box 985
SUUdhara
Kathmandu
Tel:
+977 1 35 08 18
+977 1 35 06 89
Fax:
Email: nbsm@ccsl.com.np
NETHERLANDS WEN)
Nederlands Nonnalisatie-instituut
Vlinderweg 6
NE2623 AX Delft
Postal Address
PO Box 5059
2600 GB Delft
+31 15 2 69 03 90
Tel:
+31 15 2 69 01 90
Fax:
Email: inf0anen.d
NEW ZEALAND (SNZ)

Standards New Zealand
Radio New Zealand House
155 The Terrace
Wellington 6001
Postal Address
Private Bag 2439
WeUington 6020
NIGER/M (SON)
Standarb Organization of Nigeria
Federal 'Secretariat
Phase I, 9th Floor
Ikoyi
Lagos
Tel:
+234 1 26 96 178
+234 1 26 96 176
Fax:
Emak son@sononhe-ng.org
NORWAY (NSF)
Norges Standardiseringsforbund
Drammqmveien 145 A
Postbob 353 Skoyen
N-0213 Os10
Tel:
+47 22 04 92 00
Fax:
+47 22 04 92 11
Email: firmapost@standard.no
OMAN@GSM)
Direct0 te General for Specifications and
Meas ments
Ministry of Commerce and Industry
P.O. Bok 550 Postal Cose No. 113
Muscat
Tel:
+968 771 32 38
Fax:
+968 771 59 92
Email: dgsm123aomanTel: .net .om
PAKISTAN(PSI)
Pakistad Standards Institution
Block #p7, Pakistan Secretariat
PK-Kadachi-74400
+92 2 1 920 62 6 1
21 920 62 63
Email: psqcadg@super.net.pk
Tel:
Fax:
+64 4 498 59 90
Tel:
+64 4 498 59 94
Fax:
Email: nelson.procter@>tmdards.com
. +92
JANUARY 2002
LIST OF WORLD-WIDE STAN'DARJbS ORGAN'IZATIONS

PALESTINE(PSI)
Palestine Standards Institution
P.O. Box 2258
Alburg Elakhdar Bldg.
Nuzha Street
PS- Ramallah
PHILIBPINES (BPS)
Bureau bf Product Standards
Departnbent of Trade and Industry
361 Sen. Gil J. Puyat Avenue
Makati City
Metro Manila 1200
Tel: +972 2 298 41 44
Tel:
Fax:
Email:
Fax: +972 2 296 44 33

E m d . standards@si.gov.ps
PANAMA (COPANIT)
Comisi6n Panamena de Normas Industriales y
T&cnicas
Edificio Plaza Edison, Tercer Piso
Avenida Ricardo J. Alfaro y Calle El Paical
Apartado Postal 9658
PanamO, 4
Tel:
+5073600600
Fax:
+507 360 07 21
Email: dgnti@mici.gob.pa
PAPUA NEW GUINEA (NISI")
National Institution of Standards and Industrial
Technology
P.O. Box 3042
National Capital District
Boroko
Tel:
+675 323 18 52
Fax:
+675 325 87 93
Email: nisit@datec.com.pg
PARAGUAY (IN")
Instituto Nacional de Tecnologia y Normalizaci6n
u
.
"
AV. Artigas 3973
Casilla de Correo 967
PY-Asunci6n
Tel:
+595 21 29 01 60
Fax:
+595 21 29 08 73
Email: intn@ntn.gov.py
PERU (INDECOPI)
Instituto Nacional de Defensa de la Competencia y
de la Proteccion de la Propiedad InTe1:ectual
Calle la Prosa 138
San Borja
Lima 41
bps@dti.gov .ph
POLAND (PKN)
Polish Committee for Standardization
ul. Swietoknyska 14B
P.O.Bor 41 1
PL-OO-950
Warszawa
Tel: +48 22 556 75 91
Fax: +4t3 22 556 77 86
E-mail: pl.isonb@pkn.com.pl
PORTUGAL (IPQ)
InstitutolPortugu6s de Qualidade
Rua Anhonio Giao, 2
P-2829-513 Caparica
Tel:
+351 1 294 81 00
Fax:
+351 1294 81 01
Email: $q@mail.ipq.pt
QATAR
D e p e t of Standards,Measurements and
Consumer Protection
Ministry:of Finance, Economy and Commerce
P.O.Box 1968
Doha
Tel:
+974 40 85 55
Fax:
4-974 47 88 49
Email: standard@qatar.net.qa
ROMATfJIA(ASRO)
Asociatic de Standardizare din Romania
Str. Mefleleev 2 1-25
70168 V curesti 1
R0-701,8
Bucuresa 1
Tel:
Fax:
Tel:
+51 1224 78 00
Fax:
+51 1224 03 48
Email: farmnategui@indecopi.gob.pe
+63 2 890 49 65
+63 2 890 51 31
+ 40 1 21 1 32 96
+40 1 210 08 33
Email: irs@kappa.ro
JANUARY 2002
LIST OF WORLD-W D E STMDARP)S ORGANIZATIONS

RUSSIAN FEDERATION (COST R)
State Committee of the Russian Federation for
Standardizationand Metrology
Leninslq Prospekt 9
Mosha 117049
Tel:
+7 095 236 40 44
Fax:
+7 095 237 60 32
Email info@gost.ru
SINGAPORE (PSB)
Singapore Productivity and Standards Board
1 Sciedce Park Drive
Singapbre 118221
Tel:
+65 278 66 66
Fax:
+65 776 12 80
Email: cfs@psb.gov.sg
RWANDA (ORN)
Office Rwandais de Normalisation (ORN)
B.P. 6185
RW-Kigali
SL0VAkKI.A (SUTN)
Slovak !Institute for Standardization
PO Bo? 246
Karloveska 63
840 00 Bratislava 4
Tel: +250 829 45

Fax: +250 833 05
E-mail: poin~oc@fwandaTel:1.rwandal.com
+4217 60 29 44 74
Tel:
+4217 65 41 18 88
Fax:
Email: ms post@sutn.gov.sk
SAUDI ARABIA (SASO)

Saudi Arabian Standards Organization
Imam Suad Ibn Abdul-Aziz Ibn Mohammed St
(West End)
P.O.Box 3437
Riyadh 11471
S L O q N I A (SMIS)
S t a n w and Metrology Institute of the Republic of
Slovenih
Smartiqska 140
SI-1000 Ljubljana
Tel:
+966 1452 0000
Fax:
+966 1 452 0086
Email: saso@saso.org.sa
SAINT LUCIA (SLBS)

Saint lucia Bureau of Standards
Heraldine Rock Building ,4mFloor,
John Compton Highway
Castries
Tel:
+ I 758 453 00 49
Fax:
+1758 452 35 61
Email: slbs@candw.lc
SEYCHELLES (SBS)
Seychelles Bureau of Standards
Pointe Lame
Mahe
Postal Address
PO Box 953
Victoria
Mahe
Tel:: +386 1478 30 13

Fax: :+386 1 478 30 94
E-mail sist@sist.si
SOUTH AFRICA (SABS)

South kfiican Bureau of Standards
1 Dr Lategan Road, Groenkloof
Private Bag X 19 1
Pretorih 0001
Tel:
+27 12 428 79 11
Fax:
+27 12 344 15 68
Email: info@sabs.co.za
SPAIN [AENOR)
Asociacirjn Espanola de Normalizaci6n y
Certifichcion
Genova(6,
E-28004 Madrid
+34 91 432 90 00
Tel:
+34 91 310 49 76
Fax:
Email: aenor@aenor.es
Tel:
+248 38 04 00
Fax:
+248 37 51 51
Email: sbsorg@seychelles.net
JANUARY 2002
LlST OF WORLD-W D E STMDARDS ORGANIZATIONS
SRILANKA(SLSI)
Sri Lanka Standards Institution
17 Victoria Place
Off Elvitigala Mawatha
P.O. Box 17
Colombo 08
Tel:
+94 1 67 15 67
Fax:
+94 1 67 15 79
Email: dgslsi@slnet.lk
SWAZILAND (SQAS)
Standardizationand Quality Assurance Section
Ministry of Enterprise and Employment
P.O. Box 45 1
SZ-Mbabane
Tel: +268 404 32 01/2/3/4/5/6

Fax: +268 404 47 11
E-mail: mee@reahetco.sz
S U D d (SSMO)
Sudanege Standards & metrology Organization
PO Boa 13573
SD-Khdrtoum
+249 11 77 74 80
Tel:
+249 11 77 48 52
Fax:
Email: ssmo@sudanmail.net
TANZ,$NIA, UNITED REP. OF (TBS)

Tanzania Bureau of Standards
Ubungo Area
Morogo o Roadsam Nujoma Road
Dares alaam
Postal Address
P.O. Bok 9524
Dar es Salaam
+255 22 245 02 98
Tel:
+255 22 245 09 59
Fax:
Email: tbsinfo@ccmail.co.tz
SWEDEN (SIS)
SIS - Standardiseringen I Sverige
Swedish Standards Institute
Sa& Paulsgatan 6
SE-118 80
Stockholm
THAILAND (TISI)
Thai Inclustrial Standards Institute
Ministq of Industry
Rama vt Street
Bangkok 10400
Tel: +46 8 55 55 20 00
Fax: +46 8 55 55 20 01
E-mail: info@sis.se
Tel:
+66 2 202 34 00-2
Fax:
+ 66 2 247 87 41
Email: thaistan@tisi.go.th
THE F RMER YUGOSLAV REPUBLIC OF
SWITZERLAND (SNV)
Swiss Association for Standardization
Biirglistrasse 29
CE-8400 Zurich
Tel:
+41 52 224 54 54
Fax:
+4152 254 54 74
Email: info@snv.ch
MACEqONIA (ZSM)
Zavod za standardizacijaI metrologija
Ministry of Economy
Samoilova 10
1000 Skopje
Tel:
+389 91 23 91 15
+389 91 11 02 63
Fax:
Email: zsm@zsm.gov.mk
SYRIAN ARAB REPUBLIC (SASMO)

Syrian Arau Organization for Standardizationand
Metrology
P.O. Box 11836
Damascus
Tel:
+963 11 512 82 13
+963 11 512 82 14
Email: sasmo@net.sy
Fax:
TRINIDlAD AND TOBAGO (TTBS)

Trinidad,and Tobago Bureau of Standards
1-2 Centby Drive Trincity Industrial Estate
Tunapupa
Postal Address
P.O. Box 467
Port of Spain
+1 868 662 88 27
+1 868 663 43 35
Email: ttbsacarib-link.net
Tel:
Fax:
JANUARY 2002
LIST OF WORLD-WDE STANDARLN ORGANIZATIONS

TUNISIA ("ORPI)
Institut national de la normalisation et de la proprietd
indwtrielle
B.P. 23
1012 Tunis-Belvbdh-e
Tel:
UNITE ARAB EMIRATES (SSUAE)

Direct0 te of Standardizationand Metrology
Ministry/of Finance and Industry
El FalahIStreet
P.O. Bo%433
Abu DhCbi
+ 216 71 78 59 22
+216 71 78 15 63
Email: inorpi@Email: .ati.tn
Fax:
Tel:
Fax:
+9712 6 74 77 88
+9712 6 77 97 71
Email: standard.mofi@uae.gov.ae
TURKEY (TSE)
Tiirk Standardlari Enstitiisii
Necatibey Cad. 112
Bakanliklar
06100 Ankara
UNITE KINCDOM(BSI)
British
dards Institution
389 Chidwick High Road
GB- Lotdon W4 4AL
+44 181 996 90 00
+44 181 996 74 00
Email: infoabsi-global.com
Tel:
Tel:
+90 312 417 83 80
Fax:
+90 3 12 425 43 99
Email: usm@tse.org.tr
TURKMENISTAN (MSIT)
Major State Inspection "Turkmenistandartlary"
Seydi, 14
744000 Ashgabat
Tel:
+993 1 251 14 94
+993 1 251 04 98
Email: nmsit@online.tm
Fax:
URUG~AY(UNIT)
Instituto/Uruguayode Normas Tbcnicas
Pza Independencia 8 12
Pis02 ,
Montefldeo
Tel:
+598 2 901 20 48
Fax: +598 2 902 16 81
Email: unit-iso@unit.org.uy
Fax:
UCANDA(UNB!3)
Uganda National Bureau of Standards
P.O. Box 6329
Kampala
+256 41 22 23 69
+256 41 28 61 23
Email: unbs@afsat.com
USA (?SI)
Americ National Standards Institute
1819 L$reet,NW
Tel:
+1212 642 49 00
+1212 398 00 23
Email: $nfo@ansi.org
Fax:
Tel:
Fax:
-E
@SW
State Committee of Ukraine for Standardization,
Metrology and Certification
(Derjstandartof Ukraine)
174 Gorkiy Street 03680
GSP,KYIV-680
USA (+ME)
Americ Society of Mechanical Engineers
United Tgineering Center
345 Eastl47th Street
New Yotk, N.Y. 10017-2392
Tel:
'+1 212 605 3333
Metrology
Tel:
+380 44 226 29 71
Fax:
+380 44 226 29 70
Email: dstul@dstul.kiev.ua
Tel:
+998 71 144 48 31
+998 71 144 80 29
E-mail: uzgost@,naytov.com
Fax:
JANUARY 2002
LIST OF WORLD-MDE STANDAR~SORGANIZATIONS
VENEZUELA WONDONORMA)
'
Fondo para la Nonnalizacion y Ce&ficacion de la
Calidad
Avda. An&& Bello-Edf. Torre Fondo C o m b
Piso 11 y 12, Apartado Postal 51116
Caracas 1050 A
WGO LAVIA(SZS)
Savezr$avod za standardizaciju
Kneza iloIa20
Post P&r. 609
W-11000 Beograd
Tel
+381 11 361 31 50
Fax:
+381 11 361 73 41
Email: jus@szs.sv.gov.yu
+58 2 575 41 11
Tel:
+58 2 574 13 12
Fax:
Email: central@fondonorma.org.ve
ZIMBFW (SM)
Standarp Association of Zimbabwe
VET NAM ("CVN)
P.O.BT 2259
Directorate for Standards and Quality

70, Tran Hung Dao Street
Hanoi
Barare!
Tel:
Fax:
Email:
+ 84 4 822 16 14
+84 4 942 24 18
Tel:
+263 4 88 20 1719
+263 4 88 20 20
Fax:
Email. sazinfo@mweb.CO .zw
5 '
qhqtl@hn.vnn.vn
YEMEN (YSMO)
Yemen Standardization,Metrology and Quality
Control Organization
P.O.Box 19213
Sana'a
Tel:
Fax:
+967 120 22 49
+967 120 22 49
JANUARY 2002

Building and Structural Design Codes

Uploaded by

Copyright:

Available Formats

Building and Structural Design Codes

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Building and Structural Design Codes

Uploaded by

Copyright:

Available Formats

TH42086

Building and Stmctural

0 British Standards Institution 2000

Except as permitted by Copyright Law no extract may be repro

stored in a retrieval system or

BSI International Survey

Structural Design Codes

List of Worldwide Standards Organihations

Structural Design Codes

BSI International Survey

Structural Design Codes

BSI International Survey

This survey covers National Building

In the case of those countries were we

Many Building Codes include mandatory

there is a current trend towards relaxing

Bdl Technical Information Group

CEIMarking and the Construction Products

BSI International Survey

Structural Design Codes

Council Directive 89/106/EEC of 21

Th6 series of Eurocodes provide

Council Directive 93/68/EEC of 22 July

Mechanical resistance and stability

The Directive permits two methods of

Th Eurocodes are made available in

Stil( in draft form, adoption of the codes as

At the time of going to press no

Within the EU, products which are CE

BSI International Survey

Structural Design Codes

countries in the EEA e.g. the UK. However

Other Relevant European Directives

BSI International Survey

Structural Design Codes

EUROPEAN NETWORK OF BUILDING RESEARCH INSTITUTES

Fax: +358 0 456 70 03

BSI International Survey

Structural Design Codes

Structural Design Codes

BSI International Survey

Tel: +34 1 302 04 0 4 F a : +34 1 302 07 00

Fax: +44 923 66 40 10

BSI International Survey

Structural Design Codes

BASIS OF DESIGN ANa ACTIONS ON STRUCTURES

Actions on silos and tank$

Marine and maritime struhtures

DESIGN OF STEEL STqCTURES

General rules and rules fqr building

Structural Design Codes

BSI International Survey

DESIGN OF COMPOSITk STEEL & CONCRETE

DESIGN OF TIMBER ST~UCTURES

General rules and rules fhr building

DESIGN OF MASONRY PTRUCTURES

Rules for reinforced and Vnreinforced masonry

I General rules and rules fdr building

Structural Design Codes

BSI International Survey