Mb0047 - Management Information System
Mb0047 - Management Information System
Mb0047 - Management Information System
PROGRAM- MBA
SEMESTER- II
MB0047- MANAGEMENT INFORMATION SYSTEM
Q1. Professor A. Van Cauwenbergh of Antwerp University, in a paper presented at the Tenth
Anniversary Conference of the European Institute for Advanced Studies in Management presented
four revisions to traditional Management Theory. In summary, the revisions are:
(1) The initiative for the renewal and adjustment of the activities of a firm should come from the
different levels in the management hierarchy. Strategy is not a privilege of top management.
(2) Firms, especially big firms, are incoherent systems (goals of the different component systems are
not simply subdivisions of an overall goal; there are individual, conflicting goal as well).
Some of these differences are manifestations of organizational initiative and vitality. Using
information systems and central planning and rule-making to suppress all differences is destructive
to organizations.
(3) the most vital fluid of an enterprise is the aggregate of its entrepreneurial values. The most
fundamental and motivation and control come through these shared values relative to work, quality,
efficiency, etc. Management often neglects these values and assumes that the collection and
dissemination of information will provide sufficient motivation and control.
(4) Enterprises are open systems; their structure and operating processes are determined by their
environment. This means organizations must be designed to continually adjust to the environment.
a. If these revisions are correct, how is planning to be organized?
b. How should the information system support the planning organization?
(Explaining the organizational planning process with diagram-4, Guidelines for planning MIS-2,
Comparing MIS plan and Business Plan (at least two)-2, Explaining significant problem of the Lewis
model-2) 10 marks
Answer.
A.) Organizational planning process with diagram
The overall implementation activity. The system designers are change agents who speed up the process of
implementation. As the project deals with people it has to be dealt with care. The user of the system has a
certain fear complex when a the work culture changes. The foremost fear is the consequences of
changeover from the old to the new system. Care has to be taken to assure the user that these fears are
baseless. The second fear is about the role played by the person in the organisation and how the change
affects him/her. On many occasions, the new role may reduce his importance in the organisation or the
work design may make the new job impersonal. This may reinforce the fear complex and the career
prospects of the user may be affected. Systems designer leads the implementation of the project by a set of
guidelines to ensure success.
B.)
Guidelines for planning MIS
Systems designer leads the implementation of the project by a set of guidelines to ensure success. The
systems designer should:
1. Offer a service for the user and should not allow scope creep by bowing down to their demands. .
2. Remember that the system design is the basic document of reference that connects the user and the
designer in the development of a system. In designing a system, the technical needs and the information
needs are listed separately and clearly. The designer should develop a design relevant to the chosen
technology to meet the information needs.
3. Impress upon the user of the system that the design meets the present and future needs.
4. Remember that it is up to the user to use the information in way he thinks is proper for decision-making.
5. Indicate to the user that the quality of inputs decides the quality of information.
6. Remind the user you are one of the persons in the company and the information is a common resource
hence you are expected to contribute to the development of the MIS.
7. The user commits to the requirements of the system design specifications. The designer should contribute
substantially to the quality of the information and successful implementation.
8. Management has to accept the proposed system
9. Not expect perfect understanding and knowledge from the user as he may not have technical knowledge
regarding system development. The user is often a person with knowledge of business and not on the
technical aspects of the systems development activities. Explain to the user that the change, which is easily
possible in manual system, is not as easy in the computer system as it calls for changes in the programs.
10. Apprise the user that perfect information is non-existent and therefore his role is important in the
organisation to provide accurate reliable information.
11. On a priority, solve the organizational issues before the MIS is developed.
12. Periodically conduct the formal review meetings to know the issues and problems faced by them. It is
through interaction that solutions are found for problems.
13. Train the user in computer application and systems analysis as his understanding of the computerized
information system may differ. Implementation of the MIS in an organisation is a process where change can
occur in a number of ways.
Comparing MIS plan and Business Plan
It is necessary to develop the objectives for the MIS to support the business goals. The MIS goals and
objectives consider management philosophy, policy constraints, business risks, internal and external
environment of the organization. Business plan is general in nature and is available across the departments
to facilitate communication and attain of organizations goals.
MIS plan
1. Management information system
Objectives are consistent with the
Such statements of goals and objectives help the designer implement strategies for the MIS Plan.
Significant problem of the Lewis model
The significant problem in this model is the resistance to change. The resistance can occur due to three
reasons, which are the internal factors, design factors and users attitude. Users resist change as they are
habituated to the system. If they are asked to use another system which they are not familiar with, then
opposition emerges. It is here, that education, training and motivation will help.
Q2. Information Technology and Computers have brought information age. The spread of Internet &
relative ease of access made Information Breach easier. Our future is not secure, if our information is
not secure. Information Resources need to be guarded, protected and controlled. List the
precautionary measures to be considered to prevent cybercrime?
(Listing any 5 measures to prevent cyber crime) 10 marks
Answer.
Measures to prevent cyber crime
Violated computers are often damaged while the hacker either makes off with, or decides to destroy the
data on the hard drive. Business owners especially need to be vigilant to computer crimes. Here's how such
criminal acts can be prevented.
required
information
easily.
Q3. a. While implementing MIS in any organization change can occur in number of ways. List and
explain the steps in the process as suggested by Lewins model.
b. Compare between prototype approach and Life Cycle approach
(Explaining the 3 steps of implementing the process suggested by Lewins model-6, Comparison between
the two approaches at least two points-4) 10 marks
Answer.
A.)
Steps of implementing the MIS process suggested by Lewins model
Implementation of the MIS in an organisation is a process where change can occur in a number of ways.
The Lewin's model suggests three steps in this process.
1. The first step is to communicate openly within the organisation. This makes everyone in the organisation
look forward to the new system or the changes with a sense of pride
2. The second step is to outline a list of activities specifying when they begin and reach the desired level of
stability.
3. The third step is refreezing and reinforcing. This process is often implemented through an external
change agent, such as a consultant playing the role of a catalyst.
Comparison between prototype approach and Life Cycle approach
The differences between the two approaches are given as:
Life cycle thinking is made operational through Life Cycle Management (LCM). LCM is a management
approach that puts the tools and methodologies in the life cycle thinking basket into practice. It is a product
management system that helps enterprises to minimize the environmental and social burdens associated
with their product or product portfolio during its entire life cycle
The prototyping process is initiated by two meetings, one with each group. The purpose and the intended
use situation of the prototype are presented for the group. The purpose of the prototyping process is also
explained, along with a brief description of the principles of prototyping. A mutual understanding and
agreement of the aim of the project is developed based on discussions regarding our respective
expectations. One important issue is that the students are not willing to devote too much time to the
participation in the prototyping. It is agreed upon that the students should use the prototype only in
situations where they find it useful, they will not be ``forced'' to use and evaluate all the services of the
prototype.
2. Necessary to try out the ideas, application and 2. No need to try out the application of the
efficiency of the information as a decision support.
3. Necessary to control the cost of the design and 3. Scope of the design and the application is fully
development before the scope of the system and its determined with clarity and experimentation is not
application is fully determined. Experimentation is necessary
necessary.
Q4. There is an information explosion in todays society. There are lot of advantages of DBMS like
proper maintenance of the data and maintaining security. Explain the process of data transition
using diagram and an example of your own.
(Writing diagram-2, Own example-3, Explaining the process-5) 10 marks
Answer.
Process of data transition
Data that has been processed is referred to as information. Information helps in analysis and decision
making. It is observed that information is obtained from the data but not all data produce useful
information. Information is useful when it is relevant, reliable, accurate, up-to-date, timely, complete,
intelligent, consistent and convenient to the recipient. An information system is designed in a way to
process data to a meaningful form, i.e., to accept input, manipulate it in some way and produce output.
DBMS helps in gathering and providing reports. The set of data that is stored in row and columns to
perform a specific task is referred to as DBMS.
The main function of the information systems is to convert data into information. Figure depicts how data is
converted into information using the intermediate processes. The information systems can perform its
function only with the proper organisation and structure to convert data into information. Data represents a
fact or statement of event without relation to other things.
company's intranet that is extended to users outside the company. It has also been described as a "state of
mind" in which the Internet is perceived as a way to do business with a pre-approved set of companies
(business-to-business - B2B), in isolation from other Internet users. In contrast, business-to-consumer
(B2C) involves known server/s of one or more companies, communicating with unknown consumers.
Q6. Artificial intelligent system functions like a human being and helps a manager in taking quick
decisions. Explain the different applications AI using diagram.
a. Diagram
b. Applications of cognitive science
c. Applications of robotics
d. Applications of natural interface
e. Explaining each type with an example
(Diagram-2, Applications of cognitive science-2, Applications of robotics-2, Applications of natural
interface-2, Explaining each type with an example-2) 10 marks
Answer.
Different applications AI using diagram
The aim of AI is to promote computers that can simulate the ability to think, see, hear, walk, talk and feel.
In other words, simulation of computer functions normally is linked with human intelligence, such as
logical thinking, finding out reasons and solving troubles. AI can be grouped under three major areas
namely cognitive science, robotics and natural interfaces. Cognitive science focuses on researching on how
the human brain does work and how human beings imagine and find out.
Figure: Applications AI