Complete Guide to the ASP

APPLICATION AND EXAMINATION INFORMATION

First Edition | NOVEMBER 2014

Associate Safety
Professional

Advancing the Safety, Health and Environmental

Profession Since 1969

 2014 Board of Certified Safety Professionals,

Champaign, Illinois, USA
All rights reserved.
A BCSP Publication

All or any part of this document may be freely copied and distributed with the following
restrictions: Excerpts, in any form or medium, must include a formal statement acknowledging that
the Board of Certified Safety Professionals is the owner of the copyrighted material excerpted from
this document. Copies and redistributions of this whole document, in any form or medium, must
include the entire copyright notice and the restrictions shown on this page.
The Board of Certified Safety Professionals is committed to impartiality and objectivity in every
aspect of our operation. We have intentionally structured ourselves to segregate responsibilities
in our organization to facilitate this impartiality and objectivity. Any individual who has a
recommendation on how we can improve our implementation of our commitment is encouraged
to contact our Chief Executive Officer with your thought.

The Complete Guide to the ASP

First Edition | November 2014

Table of Contents
INTRODUCTION

CHAPTER 1

CERTIFICATION SUMMARY

CHAPTER 2

APPLICATION INSTRUCTIONS

CHAPTER 3

PREPARING FOR THE EXAMINATION

CHAPTER 4

EXAMINATION OVERVIEW

CHAPTER 5

EXAMINATION SAMPLE ITEMS

CHAPTER 6

AFTER YOU ACHIEVE YOUR CERTIFICATION

CHAPTER 7

NOTE:
For the most current version of this publication please visit www.bcsp.org.
As a candidate or certificant you are solely responsible to keep BCSP informed of
your current mail and email address. If either address changes, you must notify BCSP.
You could lose your credential or eligibility status if you miss important notifications
related to your designation.

Chapter 1
Introduction
The Associate Safety Professional (ASP) Certification

How to Use This Guide

Thank you for your support and acknowledgment of the value

of certification. Whether your career goals include seeking
a new position, moving up in your current organization
or moving to private practice, you can accelerate your
opportunities by achieving the Associate Safety Professional
(ASP) certification. You can improve your chances for success,
being selected for leadership and senior positions, and
increased salary through the ASP credential. BCSP offers you
the opportunity to rise above the competition by adding the
ASP certification to your portfolio.

This guide provides you with in-depth information regarding

the application process, examination process and the rules
and procedures essential in retaining the ASP certification after
you achieve it. Reading and following the suggestions and
rules in this guide will help you navigate your path to the ASP
certification.
Click on My Profile at bcsp.org to create an account and
apply for your desired certification(s). If you need further
assistance you may contact the Certification Services
Department at +1 217-359-9263 or by email at bcsp@bcsp.org.

Purpose of This Guide

The purpose of this guide is to walk you through the process
of applying for and taking the examination leading to the ASP
certification. This guide is the first step to help you achieve the
credential.

Overview of the Certification Process

Schedule
Exam

Apply
Online

Determined
Eligible

Purchase
Exam

Five Year
Recertification

Sit for Exam

Pay Exam Fee

Fail

Pass

Receive
Certification

Maintain
Certification

Annual Renewal Fee

One Year Eligibility

Introduction 1

Certified Safety Professional

has been in operation for more than 40 years with

25,000 CSPs certified

is the premier certification in

the safety profession

covers a wide range of safety, health and environmental

(SH&E) practice disciplines

Associate Safety Professional

demonstrates a broad scope of knowledge of SH&E

practice

serves as one of several approved credentials meeting

requirements for the CSP; recognized as a full
certification as of 2014

Occupational Health and Safety

Technologist

provides practitioners with partial responsibility in SH&E

with a high quality certification

Construction Health and Safety

Technician

offers a certification for individuals who work in a

construction craft or are construction safety specialists

Safety Trained Supervisor

provides a quality certification for work group leaders in

various industries who are responsible for the safety and
health of their workers

is a leading indicator of safety performance

has led to reductions in injuries and workers

compensation claims and has created productivity gains
in participating companies

Safety Trained Supervisor Construction

holds the same requirements and benefits as the Safety

Trained Supervisor certification but provides a quality
certification for work group leaders working specifically
in construction

Certified Environmental, Safety and

Health Trainer

certifies those who have experience and expertise in

developing, designing, and delivering SH&E training

2 Introduction

About BCSP
BCSP is recognized as the leader in high-quality credentialing
for SH&E practitioners. BCSP establishes standards for and
verifies competency in professional safety practice and
evaluates certificants for compliance with recertification
requirements. BCSP also operates technician, technologist,
and supervisory certifications that provide additional career
paths for safety practitioners.
Since 1969, over 40,000 individuals have achieved the CSP,
ASP, OHST, CHST, STS, STSC or CET credential. BCSP is a notfor-profit corporation chartered in Illinois with headquarters in
Champaign.

Career Information
For details on careers in SH&E, download from the BCSP
website:

Career Guide to the Safety Profession (booklet)

Career Paths in Safety (brochure)

For a comprehensive list of accredited U.S. academic

programs, search the BCSP Academic Database. If you have
questions, please email us: bcsp@bcsp.org.

Accreditation and Recognition

BCSPs certifications are accredited by independent, thirdparty organizations (listed below) that evaluate certification
requirements on a regular basis.

American National Standards Institute (ANSI),

www.ansi.org
[ISO/IEC 17024, General Requirements for Bodies
Operating Certification Systems of Persons]

National Commission for Certifying Agencies (NCCA),

www.credentialingexcellence.org

Council of Engineering and Scientific Specialty Boards

(CESB), www.cesb.org

BCSP has been granted special consultative status with the

United Nations Economic and Social Council (ECOSOC) since
2014.

Chapter 2
Certification Summary
Chapter Abstract

Experience Requirement:

This chapter provides general information about the Associate

Safety Professional (ASP) credential. You may download this
chapter as well as other chapters of the Complete Guide to
the ASP from the Board of Certified Safety Professionals (BCSP)
website at www.bcsp.org.

ASP candidates must have one year professional safety

experience to sit for the ASP exam. Professional safety
experience must meet the following criteria to qualify:

** Professional safety must be the primary function of the

position. Collateral duties in safety are not counted.

An overview of the ASP certification is presented along

with qualifications, requirements, time limits, and degree
evaluations.

** The positions primary responsibility must be the

Visit www.bcsp.org for the most current version of this guide.

** Professional safety functions must be at least 50% of

Overview of the ASP Certification

The ASP is a certification awarded by BCSP to individuals who
meet all of the requirements established by the Board. It is one
of several approved credentials that can qualify an individual to
sit for the CSP examination.

The ASP Process

One of the most common questions by potential candidates
is What do I have to do to become an ASP? The process has
several stages, each one building on the other.
1.) Are You Eligible?

Academic Requirement:
All individuals applying for the ASP must have a bachelors
degree or higher in any field from an accredited institution; or
an associate degree in safety, health, or environmental from an
accredited institution.
There is no waiver of the academic requirement and proof
of a minimum qualifying degree must be provided. For
U.S. degrees, BCSP requires the school hold institutional
accreditation recognized by the Council for Higher Education
Accreditation (CHEA) (www.chea.org) and/or the U.S.
Department of Education (www.ed.gov).
Continuing education courses, seminars, and certificate
programs are not a substitute for, and do not receive credit
toward, the academic requirement.
Unaccredited degrees are a growing concern and some
states have laws making it illegal to use unaccredited degrees.
Applicants and certificants cannot use unaccredited degrees
and the use is a violation of the BCSP Code of Ethics.

prevention of harm to people, property, or the

environment, rather than responsibility for responding to
harmful events.
the position duties. BCSP defines full-time as at least 35
hours per week. Part-time safety experience is allowed
if the applicant has the equivalent of at least 900 hours
of professional safety work during any year (75 hours
per month or 18 hours per week) for which experience
credit is sought.

** The position must be at a professional level. This is

determined by evaluating the degree of professional

charge by which there is a reliance of employees,
employers or clients on the persons ability to identify,
evaluate and control hazards through engineering and/
or administrative approaches.

** The position must have breadth of professional safety

duties. This is determined by evaluating the variety of

hazards about which the candidate must advise and the
range of skills involved in recognizing, evaluating, and
controlling hazards.

2.) Submit Your Application

BCSP reviews all application materials to determine
eligibility for the ASP examination. Candidates must meet all
requirements in order to be made eligible to sit for the ASP
examination. More information about the application process
can be found in Chapter 3, Application Instructions.
3.) Purchase Your Exam
Anytime during the one-year eligibility period, candidates may
pay for their examination online or by calling Certification
Services at +1 217-359-9263. The examination authorization
period begins the day a candidate purchases an exam (within
their one-year eligibility period) and ends once he/she has
sat for the examination or on the day their eligibility ends,
whichever comes first.
Active or retired military may qualify for a reimbursement
of the examination fee through the VA. The VA Brochure is
located on the BCSP website for more information.

BCSP requires all degrees from colleges and universities

outside the United States be evaluated for U.S. equivalency.
Information regarding the process for having an international
degree evaluated for BCSP certification is available in Chapter
3, Application Instructions.

Certification Summary 3

4.) Schedule Your Exam

Once BCSP has processed your examination fee, you will
then be able to schedule your examination with Pearson VUE.
Pearson Vue is the official computer-based testing proctor for
all BCSP examinations. More information about scheduling
your examination can be found in Chapter 5, Examination
Overview.
5.) Sit For Your Exam
Candidates eligible for the ASP examination must pass the
examination within their one-year of eligibility.
BCSP allows candidates to extend their eligibility time limit
once during their term and the extension is valid for one year.
Extensions are available for purchase within the last 60 days of
a candidates eligibility period and the candidate cannot have
an outstanding exam authorization.
Those who do not meet this time limit nor purchase the
eligibility extension must reapply as a new candidate and meet
the current application requirements. A detailed outline of
eligibility is provided once an application has been approved.
BCSPs examination provider, Pearson VUE (www.pearsonvue.
com/BCSP), has hundreds of test centers located around
the world and operates every business day. Examinations are
delivered via computer at the test center. Candidates will be
given their examination results at the center immediately after
submitting their exam. Candidates that fail may purchase a
new examination authorization as long as they remain eligible.
For a list of current fees, visit www.bcsp.org/Certifications/
Safety-Certifications-at-a-Glance.
6.) Maintain Certification

Annual Renewal Fees:

After completing all of the requirements, BCSP awards
candidates who pass the ASP exam the ASP credential.
Certificants will need to pay annual renewal fees in order to
maintain certification. A prorated renewal fee will be applied
for the remainder of the year in which the candidate passes
the exam.

Recertification:
ASPs must remain up-to-date with changes in professional
practice by earning 25 Recertification points every five years.
Additional information regarding Recertification can be
found in the Recertification Guide, located at www.bcsp.org/
Recertification.

4 Certification Summary

Chapter 3
Application Instructions
Chapter Abstract

Submitting Transcripts

This chapter provides detailed instructions and information

about how to apply to become an ASP. You may download
this chapter as well as other chapters of the Complete Guide
to the ASP from the Board of Certified Safety Professionals
(BCSP) website at www.bcsp.org.

Information on submitting transcripts will be provided as you

fill out your application online.

Visit www.bcsp.org for the most current version of this guide.

Application Instructions
Individuals who wish to pursue the ASP must create a profile
through My Profile at www.bcsp.org. Once you have created
your profile, you may select the certification application you
are interested in and follow the online instructions. Candidates
for certification apply only once, provided they follow all
policies and stay within their eligibility time limit.
A complete application requires candidates to provide:
1. Contact Information
2. Experience Information
3. Education Information
4. Application Agreement and Validation (acknowledging
truthful information has been provided, informing BCSP
of any criminal convictions or unethical behavior, and
agreeing to adhere to BCSP Code of Ethics)
5. Payment of Application
Do not send resumes, professional papers, continuing
education course certificates, or any other items that are not
specifically requested.
After you submit your application, BCSP Certification Services
will contact you with any questions or once your application
review has been completed.
The application fee is nonrefundable and nontransferable. For
a list of current fees, visit www.bcsp.org/Certifications/SafetyCertifications-at-a-Glance. You will be prompted to include
payment along with your application. Your application will not
be complete until payment for the application fee and any
additional requested materials have been received.

International transcripts must be evaluated by BCSPs

approved third party degree evaluators so that U.S. equivalency
may be determined. The evaluation must be completed by
a member of the National Association of Degree Evaluation
Services (NACES). A list of NACES members can be found at
www.naces.org.
Validation
BCSP requires applicants to disclose criminal convictions,
disciplinary actions, and denial or revoked certifications,
licenses and professional registrations taken against the
applicant by the issuing certification board or agency. BCSP
uses its policy relating to criminal convictions to determine
whether the application can proceed or whether it will be
terminated. In some cases, a BCSP attorney may contact the
applicant to clarify information about the conviction. A copy
of the BCSP criminal conviction policy appears on each BCSP
certification webpage under the Resources tab Policies and
Forms.
Applicants are required to provide disclosure of:
All felony convictions
All misdemeanor convictions within the past five (5)
years (Minor traffic violations and petty offenses DO
NOT have to be reported)
Any record of unethical behavior
Information related to having a professional license
or certification denied, suspended or revoked for
reasons other than not meeting qualifications, failure of
examination, or failure to pay renewal fees
Auditing
BCSP randomly selects 5% of applications for audit. If your
application is selected, you will be required to provide
experience documents and an official university transcript
in a sealed envolope. Acceptable forms of validation
documentation for experience are:
1. A copy of the Experience Form(s) submitted with your
application signed by supervisor or manager of the
company;
2. A letter on company letterhead from employer validating
employment dates, job title and percentage of job duties
which are/were Safety/Health/Environmental;
3. BCSP Experience Validation Form completed by
employer (ONLY IF YOUR APPLICATION IS SELECTED
FOR AUDIT).

Application Instructions 5

Chapter 4
Preparing for the
Examination
Chapter Abstract

Read the items carefully

This chapter provides information about BCSP examinations

and suggestions for preparation. You may download this
chapter as well as other chapters of the Complete Guide to
the ASP from the Board of Certified Safety Professionals (BCSP)
website at www.bcsp.org.

Consider the context

Visit www.bcsp.org for the most current version of this guide.

Preparing for the Examination

You may use various approaches to prepare for the
examination:

Use examination time wisely

Go back to troublesome items
Complete all items

Using Your Authorized Calculator(s)

You may bring two calculators into the secure testing room
as long as they both are among the brands and models listed
below:
Casio models FX-100, 200 or 300 series

Complete Self-Assessment examination

Hewlett Packard models HP 10, 12, or 17 series

Perform individual study

Texas Instruments models TI-30 series

Participate in informal study groups

Attend formal review courses
Some keys to success include:
Knowing your strengths and weaknesses
Having an examination preparation plan
Developing a test-taking strategy
Understanding how to use your calculator

Make sure you know how to use your calculator(s) so you

dont waste valuable time trying to understand how to use
it once the examination clock starts. It is a good idea to
practice working solutions and to be able to recall the correct
calculator procedures.
Remember, solutions to computational items usually are
rounded. You should select the answer closest to the
computed value.

Having an Examination Study Plan

Obtaining Information on the Body of Knowledge

The examination blueprint shows how the items on an

examination are distributed across domains and tasks/
topics. The percentage of items per domain is noted on the
examination blueprint.

Draw on your experience and on professional and study

references in your own library, a company library, or a public
library. BCSP maintains a list of examination references for
each certification at www.bcsp.org/Resources/Review-andStudy-Sources. Examination items are not necessarily taken
directly from these sources. However, BCSP believes these
references represent the breadth and depth of coverage of
safety, health, and environmental practice.

Converting your subject strengths and weaknesses into a

study plan is likely to increase your overall examination score.
Scoring well in one subject area can compensate for a weaker
score in another subject area. However, there may not be
enough items in your strong areas to achieve a passing score.
Note that knowledge and understanding are essential
in passing the examination. Relying only on simulated
examination items is not the best way to increase knowledge
and understanding. Use simulated items to provide insight into
the areas in which you should engage in additional study.

Developing a Test-Taking Strategy

Knowing how to take the examination will help improve your
score. The examination uses multiple-choice items with only
one correct answer and three incorrect answers. Remember,
the goal is to get as many items correct as possible. There is
no penalty for selecting an incorrect answer. However, only
correct answers count toward reaching the passing score.

6 Preparing for the Examination

BCSP-Published Self-Assessment Examination

It is essential for you to compare your knowledge against what
is contained in the examination blueprint. One way to do this
is by using a self-evaluation method. A self-evaluation helps
determine how well you know various subjects.
BCSP publishes a self-assessment examination for all
certifications. The self-assessment examination can help
diagnose how well you know the body of knowledge, as well
as to help refresh your test-taking skills.
The self-assessment examination is based on the blueprint
described in this guide and is half the length of a full
examination. The self-assessment examination includes a
scoring sheet and correct answers. It also includes solutions to
computational items, along with references for each item.

To order a self-assessment examination, please log on to My

Profile at www.bcsp.org to make the purchase.

Other Review and Study Sources

A number of professional membership organizations,
trade organizations, colleges, and universities, and private
companies offer study courses, software, and materials to
assist candidates when preparing for BCSP examinations.
Because candidates for BCSP examinations often ask where to
locate review courses and materials, BCSP maintains an online
list strictly as a courtesy at www.bcsp.org/Resources/Reviewand-Study-Sources.
Beyond the written materials BCSP publishes, BCSP has no
involvement in the development, content, or distribution of
any courses or materials associated with preparing for BCSP
examinations or evaluating readiness. BCSP neither endorses
the providers shown on the online list nor evaluates the
providers or the providers materials for consistency with
BCSP examination blueprints or with any aspect of any BCSP
examination.
Candidates must contact the sources directly about materials,
course schedules, fees, or matters related to satisfaction with
their products or services.

Examination Integrity
A key to a successful and respected credentialing program is
examination security. Without it, a peer-operated credentialing
program has little value. BCSP relies on the ethical behavior of
candidates and certificants to maintain the security of BCSP
examinations.
When those who hold credentials or those who are pursuing
credentials reveal information about the content of BCSP
examinations, they violate the agreement all candidates
accept when they apply for certification and when they
take an examination. Applicants, examination candidates, or
certificants who reveal confidential information about the
content of BCSP examinations through any means also violate
the BCSP Disciplinary Action Policy and the BCSP Code of
Ethics.
BCSP pursues legal actions against organizations, individuals
not seeking certification, and individuals who fraudulently
claim or misrepresent their intent to seek certification, who
reveal information about the content of BCSP examinations.
Penalties include permanently barring individuals from
pursuing the credential and revoking the certifications and
interim designations of those who have status with BCSP, in
addition to other legal remedies.

Preparing for the Examination 7

Chapter 5
Examination Overview
Chapter Abstract

General Description of the ASP Examination

This chapter provides detailed information about the ASP

examination leading to the ASP credential. You may download
this chapter as well as other chapters of the Complete Guide
to the ASP from the Board of Certified Safety Professionals
(BCSP) website at www.bcsp.org.

All candidates for the ASP must pass the ASP examination to
earn the credential.

An overview of the ASP examination is presented along with

its respective examination blueprint. Sample items typical of
the examination can be found in Chapter 6 with solutions and
explanations.
Visit www.bcsp.org for the most current version of this guide.

Computer-Based Testing
The ASP examination uses computer-based testing, with one
item appearing on the screen at a time. You will simply use a
mouse to point to the desired answer and click on it to select
it. Answers can be changed the same way.
You can mark items to return to later or simply skip them and
move to the next item. At the end of the examination, there is
a table of items and answers selected. The table also shows
skipped and marked items. You can return to any item by
simply clicking on the item number.
Prior to beginning the actual examination, there is a
tutorial. Your examination clocks begins when you officially
commence with the examination itself. After completing
the examination, you will log off to formally submit your
examination for scoring. You will receive results before you
leave the testing center facility.
You will have FIVE (5) hours to complete the ASP examination.
Examinations are closed book, and accessing external
reference materials during your examination is not permitted.
For use during the examination, the testing center will provide
you with materials for working out calculations by hand.
Refer to the Pearson VUE Computer-Based Testing Brochure
located at www.bcsp.org for more details and requirements.
Scheduling Your Exam
Once you have purchased your examination, BCSP will send
you information on scheduling your examination with a
Pearson VUE testing center. It is important that when you
schedule, you do so on Pearson VUEs website or by calling
their national number. Local testing centers do not schedule
examinations.
For a complete list of testing center rules and procedures, visit
www.PearsonVUE.com/BCSP.

8 Examination Overview

The ASP examination contains 200 multiple-choice items

with four possible answers and only one correct answer. Data
necessary to answer items are included in the item or in a
scenario shared by several items. Each item is independent
and does not rely on the correct answer to any other item.
Formulas will be embedded into each item that requires one.

ASP Examination Blueprint

BCSP examination blueprints are based on surveys of what
safety professionals do in practice. The ASP examination
is required for candidates to demonstrate knowledge of
professional safety practice at the ASP level.
The top levels, called domains, represent the major functions
performed by safety professionals at the ASP level. Each
domain is divided among several topics. Within each topic are
lists of knowledge areas necessary for carrying out the topic
in that domain. Each domain heading is accompanied by a
percentage label which represents the proportion of the actual
ASP examination devoted to that domain. The following pages
describe the subject matter covered by the ASP examination.

Examination Content Development and Revision

BCSP updates examinations continuously. Most items come
from safety professionals in practice. Before items are
accepted into item banks, they go through rigorous technical,
psychometric, and grammatical editing. Also, 1015% of the
items on BCSP examinations are experimental, and do not
contribute to a candidates pass/fail decision. BCSP analyzes
the performance of these experimental items before including
them as scored items.

How BCSP Establishes the Minimum Passing Score

BCSP uses a criterion-referenced procedure (the modified
Angoff technique) to establish minimum passing scores for
examinations. This procedure ensures that the passing score
is independent of scores for other candidates sitting for the
examination and involves having a panel of experts rate each
examination item with respect to the minimally qualified
candidate. As examinations are modified on a regular basis,
the minimum passing score is adjusted for the difficulty of
items on the examination. Item performance is also evaluated
regularly to ensure that BCSP examinations maintain the
highest testing standards.

ASP EXAMINATION BLUEPRINT

BCSP examination blueprints are based on a peer review process to determine what safety professionals do in
practice. The ASP examination is required for candidates to demonstrate knowledge of professional safety practice at
the Associate Safety Professional (ASP) level. The table beginning below and continuing on the next several pages
describes the subject matter covered by the ASP examination.

Current Examination
Blueprint

The top four levels, called domains, represent major areas of practice that safety professionals at the ASP level must
understand. Within each domain are knowledge topics. For most knowledge topics, there is a list of knowledge areas.
A percentage label accompanies each domain heading in this table. This percentage represents the proportion of the
actual ASP examination devoted to that domain.

ASP Examination
Domain 1
Recognizing Safety, Health, and Environmental Hazards
35.4%
Topic 1
Biological Hazards
Topic 2
Chemical Hazards
Topic 3
Electrical Hazards
Topic 4
Natural Hazards
Topic 5
Radiation Hazards

Knowledge Areas
1. Ionizing radiation
2. Nonionizing radiation

Topic 6
Structural and Mechanical Hazards
Topic 7
Hazards Related to Fires and Explosions
Topic 8
Hazards Related to Human Factors and
Ergonomics

Knowledge Areas
1. Fitness for duty
2. Manual materials handling
3. Organizational, behavioral, and psychological influences
4. Physical and mental stressors
5. Repetitive activities
6. Workplace violence

Examination Overview 9

ASP Examination
Domain 2
Measuring, Evaluating, and Controlling Safety, Health, and Environmental Hazards
30.9%
Topic 1
Measurement and Monitoring

Knowledge Areas
1. Methods and techniques for measurement, sampling, and analysis
2. Uses and limitations of monitoring equipment

Topic 2
Engineering Controls

Knowledge Areas
1. Dust control
2. Equipment and material handling
3. Excavation shoring
4. Facility physical security
5. Fall protection
6. Fire prevention, protection, and suppression
7. Hazardous energy control
8. Human factors and ergonomic design
9. Mechanical and machine guarding
10. Segregation and separation
11. Substitution and selection of alternative design strategies
12. Ventilation

Topic 3
Administrative Controls

Knowledge Areas
1. Accountability
2. Behavior modification
3. Decontamination processes
4. Exposure limitation
5. Fitness for duty
6. Housekeeping
7. Labels
8. Material safety data sheets
9. Safe work permits
10. Training and education
11. Warnings and signs
12. Work zone establishment
13. Written plans, procedures, and work practices

Topic 4
Personal Protective Equipment

Knowledge Areas
1. Assessment of need for personal protective equipment
2. Selection and testing of personal protective equipment
3. Usage of personal protective equipment
4. Maintenance of personal protective equipment

10 Examination Overview

ASP Examination
Domain 3
Safety, Health, and Environmental Training and Management
20.6%
Topic 1
Training and Communication Methods

Knowledge Areas
1. Adult learning techniques
2. ANSI/ASSE Z490.1 (American National Standard: Criteria for Accepted
Practices in Safety, Health, and Environmental Training)
3. Behavior modification
4. Methods of training delivery
5. Methods of training evaluation
6. Presentation tools

Topic 2
Management Processes

Knowledge Areas
1. Emergency/crisis/disaster planning and response
2. Identification of expert resources
3. Incident data collection and analysis
4. Techniques for performing incident investigation and root cause analysis
Knowledge Areas
1. Elements of an inspection and auditing program
2. Reasons to perform inspections and audits
3. Purpose and objective of ISO 19011 (Guidelines for quality and/or
environmental management systems auditing)
Knowledge Areas
1. Conflict resolution
2. Methods of facilitating teams
3. Multidisciplinary teamwork
4. Negotiation procedures

Topic 3
Inspections and Auditing

Topic 4
Group Dynamics

Topic 5
Project Management

Knowledge Areas
1. Evaluation of cost, schedule, performance, and risk
2. Project management terminology
3. Review of specifications and designs against requirements

Topic 6
Risk Management

Knowledge Areas
1. The risk management process
2. Risk analysis methods (e.g., job safety analysis, hazard and operability
analysis, failure mode and effects analysis, fault tree analysis, whatif/checklist analysis, change analysis)

Topic 7
Safety, Health, and Environmental
Management Systems

Knowledge Areas
1. Purpose and objective of ANSI/AIHA Z10 (American National Standard
for Occupational Health and Safety Management Systems)
2. Purpose and objective of the ISO 14000 series of environmental
management system standards
3. Purpose and objective of the OHSAS 18000 series of occupational health
and safety management system standards
4. Purpose and objective of the U.S. Occupational Safety and Health
Administration Voluntary Protection Programs

Examination Overview 11

ASP Examination
Domain 4
Business Principles, Practices, and Metrics in Safety, Health, and Environmental Practice
13.1%
Topic 1
Basic Financial Principles

Knowledge Areas
1. Cost benefit analysis (e.g., calculating, evaluating, and selecting the best
alternative)
2. Definition and use of life cycle cost
3. Definition and use of net present value
4. Definition and use of return on investment

Topic 2
Probability and Statistics

Knowledge Areas
1. Concepts of probability
2. Normal (Gaussian) distribution: description, calculations, and
interpretations
3. Poisson distribution: description, calculations, and interpretations
4. Descriptive statistics: description, calculations, and interpretations (e.g.,
mean, mode, median, standard deviation, standard error of measurement,
variance)
5. Inferential statistics: description, calculations, and interpretations (e.g., ttest, z-test, chi-square test, Pearson product-moment correlation,
Spearmans rank correlation, linear regression techniques, confidence
intervals, control limits)

Topic 3
Performance Metrics and Indicators

Knowledge Areas
1. Lagging indicators (e.g., incidence rates, lost time, direct costs of
incidents)
2. Leading indicators (e.g., inspection frequency, number of safety
interventions, employee performance evaluations, training frequency, near
miss/near hit reporting)
3. Economic effects of losses (e.g., cost per incident)
4. Relationship between cost of losses and the effect on profitability

12 Examination Overview

Board of Certified Safety Professionals

2301 W. Bradley Avenue
Champaign, Illinois 61821
P: +1 217-359-9263 | F: +1 217-359-0055
E: bcsp@bcsp.org | W: www.bcsp.org

New Examination
| EXAM BLUEPRINT
Blueprint
(First Quarter 2015)

This blueprint is for the new version of the ASP Examination that will launch during the first quarter of 2015.
The current ASP Examination Blueprint can be found at www.bcsp.org/CSP.

Domain 1
Mathematics 18%
Topic 1

Chemistry and Industrial Hygiene Calculations

Knowledge of:
1.
2.
3.
4.

Corrosives
Flammables
Toxic materials
Chemical reactions

Topic 2

Electrical Calculations
Knowledge of:
1. Power, impedance, energy, and resistance
2. Arc flash
3. Circuits

Topic 3

Radiation Calculations
Knowledge of:
1. Decay
2. Half-life
3. Source strength

Topic 4

Structural and Mechanical Calculations

Knowledge of:
1. Loading and storage capacity
2. Rigging and load

Topic 5

Engineering Control Calculations

Knowledge of:
1.
2.
3.
4.
5.

Ventilation and system design

Fire suppression and system design
Noise
Climate conditions (e.g., WBGT, wind chill, heat stress)
Fall protection

Topic 6

Physics Calculations
Knowledge of:
1.
2.
3.
4.

Movement (e.g., acceleration, velocity, momentum)

Friction
Kinetic and potential energy
Gas laws
ASP Examination Blueprint 08/2014

ASP Blueprint for Examination Launching 1st Quarter 2015

5/14 13
Examination Overview

| EXAM BLUEPRINT (contd)

Topic 7

Financial Principles
Knowledge of:
1.
2.
3.
4.

Cost benefit analysis (e.g., cost of risk)

Life cycle cost
Net present value
Return on investment

Topic 8

Statistics
Knowledge of:
1.
2.
3.
4.

Descriptive statistics (e.g., central tendency, variability)

Correlational statistics (e.g., Pearsons r, Spearmans rho)
Inferential statistics (e.g., chi-square, t-test)
Probability (e.g., odds of success, Poisson)

Topic 9

Performance Metrics and Indicators

1. Lagging indicators (e.g., incidence rates, lost time, direct costs of incidents)
2. Leading indicators (e.g., inspection frequency, safety interventions, employee performance evaluations, training frequency,
near miss, near hit, and close call reporting)
3. Effects of losses

Domain 2
Safety Management Systems 23%
Topic 1

Risk Management and Hazard Control Process

Knowledge of:
1.
2.
3.
4.
5.
6.

Identification methods
Examine and analyze risks
Selection of control methods (e.g., financial justification, hierarchy of controls)
Implementation of controls
Monitor and reevaluate
Risk transfer (e.g., insurance, incident management)

Topic 2

Management Processes
Knowledge of:
1. Emergency, crisis, disaster response planning, business continuity
2. Incident investigation (e.g., data collection, analysis)
3. Inspections and audits

Topic 3

Project Management
Knowledge of:
1. Evaluation of cost, schedule, performance, and risk
2. Assigning responsibilities and accountability
ASP Examination Blueprint 08/2014

ASP Blueprint for Examination Launching 1st Quarter 2015

14 Examination Overview

5/14

| EXAM BLUEPRINT (contd)

Topic 4

Systems Safety
Knowledge of:
1. Risk analysis methods (e.g., job safety analysis, hazard and operability analysis, failure mode and effects analysis, fault tree
analysis, fishbone, what-if and checklist analysis, change analysis)
2. Process safety management

Topic 5

Fleet Safety
Knowledge of:
1.
2.
3.
4.

Driver Behavior (e.g., defensive driving, distracted driving)

Vehicle inspections
Safety features (e.g., restraint systems, automatic and anti-lock braking systems)
Crash and collision investigation

Topic 6

Safety Programs
Knowledge of:
1.
2.
3.
4.
5.
6.
7.
8.
9.

Hazard Communication and Globally Harmonized System

Workplace Violence
Control of hazardous energy
Excavation, trenching, and shoring
Confined space
Physical security
Fall protection
Wellness programs
Substance abuse

Domain 3
Ergonomics 13%
Topic 1

Human Factors
Knowledge of:
1.
2.
3.
4.
5.
6.

Fitness for duty

Organizational, behavioral, and psychological influences
Stressors
Risk factors (e.g., repetition, force, posture, vibration)
Work design
Aging workforce

Topic 2

Measurement and Monitoring

Knowledge of:
1. Quantitative methods(e.g., Anthropometry, NIOSH lift equation)
2. Qualitative methods (e.g., Rapid Upper Limb Assessment [RULA], Rapid Whole Body Assessment [REBA])
ASP Examination Blueprint 08/2014

ASP Blueprint for Examination Launching 1st Quarter 2015

5/14

Examination Overview 15

| EXAM BLUEPRINT (contd)

Topic 3
Controls

Knowledge of:
1.
2.
3.
4.
5.

Material handling (e.g. manual, powered equipment, lifting devices)

User-centered design
Human-machine interface
Work practice controls (e.g., job rotation, work hardening)
Written plans, procedures, and training

Domain 4
Fire Prevention and Protection 11%
Topic 1

Fire and Explosion Hazards

Knowledge of:
1.
2.
3.
4.
5.
6.

Chemical
Electrical (e.g., Static electricity, serge)
Natural hazards (e.g., lightning, flooding, drought)
Structural (e.g., combustible, non-combustible)
Mechanical (e.g., heat generated by friction)
Hot work (e.g., welding, cutting, brazing)

Topic 2

Fire Controls
Knowledge of:
1.
2.
3.
4.
5.
6.

Fire Science (e.g., combustible dust [fire pentagon], fire triangle, fire tetrahedron)
Detection
Suppression
Segregation and separation (e.g., flammable materials storage, ventilation)
Housekeeping
Grounding and bonding

Topic 3

Fire and Emergency Management

Knowledge of:
1. Written plans, procedures, and work practices (e.g., Incident Command system, fire brigade)
2. Life safety (e.g., Elements of design)

Domain 5
Occupational Health 11%
Topic 1

Biological Hazards and Controls

Knowledge of:
1. Sources (e.g., viral, bacterial, parasitic, fungus)
2. Exposure assessment
3. Control strategies
ASP Examination Blueprint 08/2014

ASP Blueprint for Examination Launching 1st Quarter 2015

16 Examination Overview

5/14

| EXAM BLUEPRINT (contd)

Topic 2

Chemical Hazards and Controls

Knowledge of:
1.
2.
3.
4.
5.
6.

Sources (e.g., assessment, control strategies, symptoms, target organs)

Exposure limits (e.g., PELs, TLVs, STELs, RELs)
Routes of entry (e.g., inhalation, ingestion, absorption, injection)
Acute and chronic exposures
Incompatibilities and reactivity of agents
Nano-technology

Topic 3

Physical Hazards and Controls

Knowledge of:
1.
2.
3.
4.

Noise
Vibration
Radiation
Electrical

Domain 6
Environmental Management 15%
Topic 1

Environmental Hazards
Knowledge of:
1.
2.
3.
4.
5.
6.

Disaster preparedness (e.g., manmade, natural)

Environmental hazards awareness (e.g., biological [mold], chemical, waste, vermin)
Remediation
Water (e.g., storm, waste, permitting)
Air (e.g., quality, IAQ, permitting)
Land and conservation (e.g., solid waste, recycling, sustainability)

Topic 2

Engineering Controls
Knowledge of:
1.
2.
3.
4.
5.
6.
7.
8.

Air Pollution
Segregation and separation
Substitution and selection of alternative design strategies
Hazardous materials containment and design
Water Pollution
Above ground (AST) and underground (UST) storage tanks
Ventilation (e.g., HVAC, local exhaust)
Land Pollution

Topic 3

Administrative Controls and Practices

Knowledge of:
1.
2.
3.
4.
5.
6.

Conservation (e.g., reuse, recycle, reduce)

Housekeeping
Warnings (e.g., signs, signals)
Written plans, procedures, work practices (e.g., decontamination)
Environmental management system standards
Sustainability
ASP Examination Blueprint 08/2014

ASP Blueprint for Examination Launching 1st Quarter 2015

5/14

Examination Overview 17

| EXAM BLUEPRINT (contd)

Topic 4

Hazardous Waste Storage and Disposal

Knowledge of:
1.
2.
3.
4.

Transportation (e.g., placarding, manifesting)

Storage and documentation
Spill prevention, containment, and response
Waste removal, treatment and disposal

Domain 7
Training, Education, and Communication 9%
Topic 1

Training and Education Methods

Knowledge of:
1.
2.
3.
4.
5.

Adult learning theory and techniques

Data collection, needs analysis, and feedback
Behavior and performance modification
Presentation tools (e.g., computer based, group meeting)
Assessing competency

Topic 2

Communication and Group Dynamics

Knowledge of:
1.
2.
3.
4.
5.
6.

Interpersonal communication (e.g., cross generation)

Methods of facilitating teams
Multidisciplinary teamwork
Negotiation strategy
Conflict resolution
Mentoring
ASP Examination Blueprint 08/2014

ASP Blueprint for Examination Launching 1st Quarter 2015

18 Examination Overview

5/14

Chapter 6
Examination Sample
Items
Chapter Abstract
This chapter provides sample examination items and their
solutions for the ASP examination. You may download this
chapter as well as other chapters of the Complete Guide
to the ASP from the Board of Certified Safety Professionals
(BCSP) website at www.bcsp.org.
Visit www.bcsp.org for the most current version of this guide.

Examination Question Samples

The following questions illustrate only the style and format
typical of items on the ASP examination. Not all ASP
examination task areas are represented by these sample items.
Please note it is essential for you to read and understand the
ASP examination blueprint found in Chapter 5 so you have
a complete awareness of the depth and breadth of all of the
subject matter appearing on the actual ASP examination.
1. Isopropyl alcohol has a flammability range between 2%
and 12%, therefor the Upper Explosive limit is:
A. 24% alcohol at sea level.
B. 6% alcohol in air.
C. 24% alcohol at atmosphere.
D. 12% alcohol in air.
2. This hazard control methodology can occur before,
during or after a process, especially in a more dynamic
facility.
A. Safety system review
B. Process Safety Management (PSM)

4. The NIOSH recommended weight limit represents the

maximum weight of a load that may be lifted or lowered
by about what percent of American industrial workers?
A. 90 percent
B. 96 percent
C. 85 percent
D. 98 percent
5. Friction generated fire hazards are best avoided when
using:
A. lubrication.
B. a preventative maintenance program.
C. metals compatible systems.
D. certified maintenance contractors.
6. What program defines the operation, management
and structural components through the life cycle of an
emergency fire incident?
A. Fire brigade
B. Incident command system
C. Emergency response program
D. Business continuity plan
7. Research studies where animals are subjected to a
hazardous concentration of a material and then half of
those animal die from that concentration provide what
determination?
A. LD50

C. Linear probability review

B. Materials half life

D. Engineering systems resolution.

C. 8-hour time weighted allowable exposure

D. Dose-response at 50 percent.

3. Workers should receive training on the which of the

following components regarding workplace violence?
A. Relevant policies, locations of physical defense
equipment, self-defense behaviors, and how to help
during emergencies
B. Relevant policies, diffusing difficult situations,
location of attack alarms and how to respond to
attacks
C. Relevant policies and the local laws and requirements
of civil order (police, military, or civil patrol)
D. Relevant policies, security equipment, diffusion of
threatening situations, and how to summon help

Examination Sample Items 19

8. Gravity settlers, cyclones and electrostatic precipitators

are examples of:
A. water pollution controls.

ANSWERS TO SAMPLE ASP EXAMINATION ITEMS

B. air moisture monitors.

Item
No.

Correct
Answer

Item
No.

C. air particulate controls.

D. water solubility measures.

9. The best practices waste management control hierarchy

include:
A. elimination, control and disposal.
B. recycling, treatment and disposal.
C. prevention, recycling, treatment and disposal.
D. prevention, elimination, incineration, disposal.

20 Examination Sample Items

Correct
Answer

Chapter 7
After You Achieve Your
Certification
Chapter Abstract
This chapter provides detailed information needed after
earning your credential. You may download this chapter as
well as other chapters of the Complete Guide to the ASP from
the Board of Certified Safety Professionals (BCSP) website at
www.bcsp.org.
An overview of the rules and procedures essential in retaining
the ASP credential is presented as well as proper use of the
title. It also defines discipline procedures, contains guidelines
for helping promote the value of the ASP credential, and
provides information on ordering seals, stamps, jewelry,
certificate frames, and other logo products.
Visit www.bcsp.org for the most current version of this guide.

Features and Benefits of Obtaining BCSP Credentials

Wallet Card. Each year when you pay the required annual
renewal fee, a wallet card is made available which shows
you are certified as well as your Recertification date for your
certification. The card identifies you as a title holder for the
calendar year (unless declared invalid).
Wall Certificate. When you achieve the ASP credential, BCSP
issues a wall certificate suitable for framing. Should you lose or
damage your wall certificate, BCSP will replace it for a nominal
fee. Visit My Profile at on the BCSP website to order.
Access to BCSPs Career Center. Many employers post open
job positions seeking qualified safety professionals. With
a BCSP credential, you may post your resume online and
employers have access to view your resume and contact you
if you wish.
BCSP eNewsletter Subscription. As a BCSP certificant, you will
receive the quarterly BCSP eNewsletter. The BCSP eNewsletter
contains information about important changes which may
affect BCSP certifications and designations, information
about certificate holders, and professional safety practice
information. Current issues and back issues are located on the
BCSP website.
BCSP Annual Report. The BCSP Annual Report is another
important publication you will receive electronically. It
contains summarized data about ASPs and the annual audited
financial report and can be found on the BCSP website at
www.bcsp.org/About.
BCSP Directories. BCSP publishes directories of individuals
who currently hold BCSP certifications and designations.
An abbreviated format, containing names, cities, and states,
appears on the BCSP website and allows viewers to confirm if
a person currently holds a BCSP certification or designation.

eSafetySource Registration. BCSP offers the opportunity for

BCSP certification and designation holders to register on
the electronic safety source registry, indicating their areas of
specialization.
Mail Lists. Organizations and companies providing valuable
services to safety professionals may purchase a list of BCSP
certificant names and addresses. Use of the list is restricted
and all list sales are approved by BCSP. Restrictions limit
the sale to uses which are of value in professional safety
practice (i.e. notices of upcoming conferences or professional
publications). Sales are not approved for promotion of general
merchandise or services or for resale or distribution to thirdparty organizations. ASPs may specify at any time that their
names not be included on mail lists by selecting that option in
My Profile online.
Membership Level. Individuals may use the ASP credential to
qualify for the highest level of membership in professional
safety societies. After achieving the ASP credential, check
with the safety and health organizations in which you hold
memberships to see if you qualify for a status change.
Title Protection and Laws Involving the BCSP Credentials.
Some states have enacted title protection laws which restrict
anyone from claiming to hold a BCSP certification without
having duly obtained them from BCSP. Additionally, several
states have enacted laws or regulations which specify
that ASPs may provide loss control services for insurance
companies. Check your state government website for more
details.

Use of the ASP Title

It is important to know how to use your ASP title correctly.
The Associate Safety Professional title and the letters ASP
are registered certification marks issued to BCSP by the U.S.
Patent and Trademark Office. They can only be used when
authorized for a period specifically designated by BCSP. There
are guidelines for displaying your ASP credential properly.
Examples of correct use:
Robert A. Smith, ASP
Robert A. Smith, Associate Safety Professional
The ASP credential is awarded to individuals, not companies,
and should only be used with individual names.
The ASP credential may be used only for the period for which
use is authorized. Use expires if you have not paid the annual
renewal fee or have not met Recertification requirements
for the ASP. Use of these titles beyond the authorized
period (without complying with renewal or Recertification
requirements) constitutes unauthorized use of the credential.

After You Achieve Your Certification 21

You may use these credential on your business cards, resume,

and correspondence or with your signature. You may use your
ASP credential virtually anywhere you use your name.
Example of proper company use:

ABC Safety Company provides the latest safety services.

Employees holding the Associate Safety Professional
(ASP) certification include Robert A. Smith, ASP and
Mary A. Jones, ASP.

Example of improper company use:

ABC Safety Company, providing safety services by

Associate Safety Professionals.

Maintaining Your Certification

In order to retain your certification, you must:

Inform BCSP when your mail or email address

changes

Pay your annual fee

Complete Recertification requirements

Changing Your Name. If you change your name through

marriage or other court proceedings, you may request a name
change by contacting bcsp@bcsp.org. Additionally, you must
provide a copy of the court record or marriage certificate in
order for BCSP to register the change.
Paying Your Annual Renewal Fee. The authority to use the ASP
title is valid for one year. It must be renewed annually. You will
receive a prorated fee for the remainder of the year in which
you pass the examination. Each following year, BCSP will send
you a notice when your annual renewal fee is due. BCSP gives
you several options for paying the fee online via a credit card
or by phone. After receiving your payment, BCSP will send you
a wallet card and a receipt. For a list of current fees, visit www.
bcsp.org/Certifications/Safety-Certifications-at-a-Glance.
Meeting Recertification Requirements. The Recertification
program helps ASPs keep up with changes affecting
professional safety practice. The program complies with
requirements of BCSPs national accrediting organizations.
Every five years (one cycle) you must achieve 25 points.
There are eleven categories of activities, each providing
points toward meeting that goal. Keep in mind, there is no
limit to the number of points in some categories, while other
categories have annual and/or total point limits.
At the end of the five-year period, you must submit the points
you earned during that cycle. Only points earned during a
Recertification cycle count toward that cycle. BCSP randomly
selects 5% of those who submit their points for an audit. While
documentation to prove points is not required with the initial
submission, the audit procedure requires you have proof of
the points claimed. It is important that you keep records to
verify your Recertification activities.
Additional details of the Recertification program appear in the
Recertification Guide. You may download the Recertification
Guide on the BCSP website to help you through the process.
You will want to refer to the website regularly for the most upto-date information.

22 After You Achieve Your Certification

Reinstatement
If you fail to pay your annual renewal fee on time or fail to
achieve the required Recertification points every five years,
BCSP will send you a notice that your credential has been
invalidated and you no longer hold the ASP.
You may seek reinstatement by contacting BCSP.
Reinstatement must be by 12/31 of the same year you are
invalidated. Reinstatement includes paying a reinstatement fee
and complying with the current Recertification requirements.
Otherwise, you will be required to apply as a new candidate
and meet all of the requirements in place at the time of your
application.

Career Interruptions
While holding the ASP credential, you may face situations
which affect your ability to maintain your certification. You
may experience an interruption in your safety career, such as
moving to a job which is not in the safety profession, taking
time out to be a parent, student or soldier, having an extended
health problem, or being unemployed. BCSP has established
some options to help deal with these types of situations.
Leave of Absence and Extensions. You may seek a leave of
absence or an extension if a career interruption will affect your
ability to meet Recertification requirements. Please refer to the
Recertification Guide for detailed information.
Annual Renewal Fee Waiver While Unemployed. If you
become unemployed and are unable to pay your annual
renewal fee, you may request in writing a one-time waiver of
the annual renewal fee.

Retired ASPs
There is not a retired status for the ASP, however, retired ASPs
can list the certification and the dates that they held it behind
their name.
Examples:
Robert A. Smith, Retired, ASP 1981-2012
Robert A. Smith, Retired, Associate Safety Professional
from 1981-2012
ASPs who have retired may not actively use the Associate
Safety Professional credential.

Protecting the ASP Credential and Logo

Because BCSP has registered its logos and titles, it has a solid
position for challenging BCSP title and/or logo infringement.
There are several legal theories and considerations involved.
Registration itself does not provide absolute protection from
others using similar acronyms or titles. BCSP does not have
exclusive use of the acronym. BCSP continually challenges
those uses which can be confusing to the public or for which
there are legal grounds to make such challenges.

Individuals Using the ASP Credential Without Authority

BCSP has established procedures for challenging individuals
known to use the Associate Safety Professional credential
without having obtained it or after they lost it for failure to pay
annual renewal fees or meet Recertification requirements.

In order to establish someone is using the credential without

authority, BCSP must have the original document (or a copy)
showing where the individual is using the title. Most often the
unauthorized use occurs online, on a business card, resume,
business letterhead, brochure or similar publication, or with
a signature. To initiate action against the individual using the
credential without authority, BCSP also needs the individuals
current mailing address.
BCSP relies on those finding potential unauthorized uses to
report them and provide the documentation showing the use
of these titles. BCSP will not disclose the name of the person
or organization reporting potential unauthorized uses.
After receiving documentation of a potential unauthorized use
case, BCSP takes steps to challenge that individual and seeks
to correct any record-keeping error on the part of BCSP. Legal
counsel for BCSP may participate in the procedures.
Those who have used BCSP titles without authority may be
barred from pursuing the ASP certification for five years.
Their names are also published on the BCSP website. Other
penalties may be applied. BCSP reserves the right to use the
courts in protecting use of the ASP credential.

Request Form located on the BCSP web page or contact BCSP

to determine availability of these displays.
Promotional Materials. There is a variety of complimentary
literature about all of the BCSP credentials, qualifications
and procedures, and examinations. Most BCSP publications
are available on the BCSP website as downloadable PDFs.
To request literature, please fill out the Display and Literature
Request Form located on the BCSP web page or contact BCSP.
To encourage individuals to pursue a career in safety, BCSP
offers a PDF of the Career Guide to the Safety Profession,
co-produced with the ASSE Foundation, and a Career Paths in
Safety brochure in PDF and print. These PDFs are available on
the BCSP website.
Presentation Materials. PowerPoint presentations about the
safety profession and the BCSP credentials are located on the
BCSP website at www.bcsp.org.
Mentor Program. Created specifically to recognize certificants
roles in assisting the career development of others, the mentor
program helps bring current credential holders and those
looking to pursue certification together.

BCSPs criminal conviction policy appears on the BCSP

website. It applies to certificate holders. The policy also
covers convictions by other certifications and licensing bodies
for unauthorized use of designations. It requires ASPs to
report new convictions which can result in BCSP disciplinary
proceedings.

The mentor program rewards those who become mentors

and ensures safety professionals who perform quality work
are certified. By having your mentee fill out the Professional
Advancement Mentor Form and submit it by fax or email at
the time that they apply online, BCSP recognizes sponsors
and their work with their peers, colleagues, and other safety
professionals. More information can be found at www.bcsp.
org.

Discipline Procedures

Maintaining Your Mail and Email Address

BCSP authorizes individuals to use the ASP credential when

they meet requirements for achieving and retaining the
credential. BCSP also has a responsibility to withdraw that
authorization when individuals fail to pay annual renewal
fees, fail to meet Recertification requirements, or when they
violate BCSP Disciplinary Action Policy or the BCSP Code of
Ethics. The BCSP Disciplinary Action Policy contains rules on
disciplinary procedures and grounds for action. The complete
BCSP Disciplinary Action Policy are on the BCSP website.

As an ASP, you are solely responsible to keep BCSP informed

of your current mail and email address. If either address
changes, you must notify BCSP. You could losethe ASP
certification if annual renewal notices and other important
information do not reach you.

Criminal Convictions

Appeals
You may appeal decisions related to earning and maintaining
BCSP credentials. Requests for appeal must be submitted to
the Chief Executive Officer in writing and in accordance to the
current appeals policy located online at www.bcsp.org/About.

Promoting the ASP

BCSP uses several methods to promote the ASP credential
and to encourage safety professionals to pursue it. You may
volunteer to assist in these activities. Please contact BCSP
or visit the BCSP website to determine what materials are
available.
Request a Returnable Banner Display. Use of BCSP banner
displays helps promote BCSP and the ASP certification.
They are ideal for meetings, local and regional conferences
or educational programs of local professional groups and
companies. BCSP pays for shipping to and from events. Some
instances may earn Recertification credit for promoting the
ASP. To request a display, fill out the Display and Literature

After You Achieve Your Certification 23

Code of Ethics
This code sets forth the code of ethics and professional standards to be observed by holders of documents of
certification conferred by the Board of Certified Safety Professionals. Certificants shall, in their professional
activities, sustain and advance the integrity, honor, and prestige of the profession by adherence to these standards.
Standards:
1. HOLD paramount the safety and health of
people, the protection of the environment and
protection of property in the performance of
professional duties and exercise their
obligation to advise employers, clients,
employees, the public, and appropriate
authorities of danger and unacceptable risks to
people, the environment, or property.
2. BE honest, fair, and impartial; act with
responsibility and integrity. Adhere to high
standards of ethical conduct with balanced care
for the interests of the public, employers,
clients, employees, colleagues and the
profession. Avoid all conduct or practice that
is likely to discredit the profession or deceive
the public.
3. ISSUE public statements only in an objective
and truthful manner and only when founded
upon knowledge of the facts and competence in
the subject matter.
4. UNDERTAKE assignments only when
qualified by education or experience in the
specific technical fields involved. Accept
responsibility for their continued professional
development by acquiring and maintaining
competence through continuing education,
experience, professional training and keeping
current on relevant legal issues.

5. AVOID deceptive acts that falsify or

misrepresent their academic or professional
qualifications. Not misrepresent or exaggerate
their degree of responsibility in or for the
subject matter of prior assignments.
Presentations incident to the solicitation of
employment shall not misrepresent pertinent
facts concerning employers, employees,
associates, or past accomplishments with the
intent and purpose of enhancing their
qualifications and their work.
6. CONDUCT their professional relations by the
highest standards of integrity and avoid
compromise of their professional judgment by
conflicts of interest. When becoming aware of
professional misconduct by a BCSP certificant,
take steps to bring that misconduct to the
attention of the Board of Certified Safety
Professionals.
7. ACT in a manner free of bias with regard to
religion, ethnicity, gender, age, national origin,
sexual orientation, or disability.
8. SEEK opportunities to be of constructive
service in civic affairs and work for the
advancement of the safety, health and wellbeing of their community and their profession
by sharing their knowledge and skills.

Approved by the BCSP Board of Directors November 2, 2012

Effective January 1, 2013

Notes:

After You Achieve Your Certification 27

Advancing the Safety, Health and Environmental

Professional Since 1969

2301 W. Bradley Avenue, Champaign, IL 61821 USA

P: +1 217-359-9263 | F: +1 217-359-0055
www.bcsp.org
11/14