Industrial Solutions Guide

Industrial Solutions Guide
Amplifiers, Data Converters, Digital Signal Processors, Digital Temperature Sensors,

Interface, Microcontrollers, Power Controllers, Power Management
1Q 2006
Inside
Intelligent Sensors
Motor Control
19
Security
24
Test and Measurement
29
Wireless for Industrial
32
Programmable Logic Control
34
Field Bus Systems
36
Isolation
43
Powering Industrial Designs
45
Selection Tables
48
Application Reports
75
Table of Contents
Intelligent Sensors, Process Control

Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7
Weigh Scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-14
Flow Metering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16
Linear Voltage Differential Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Current Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Motor Control
Asynchronous, DC and Servo Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-23
Security
Sensor
Application
Inputs
Plug-In
Power
LDOs
POWER
MANAGEMENT
SOLUTIONS
DC/DC
Conversion
REF
Pgs 71-73
Surveillance Cameras, Glass Breakage and Smoke Detectors . . . . . . . . . . . . . . . . . . . .24-28

Electronic E-Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Scientific Instrumentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
High-Speed Signal Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

RF Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33

Input/Output Cards, Internal Communication/Interface/Isolation, Core Logic . . . . . . . .34-35
Amp
ADC
Operational, Pg 51
Analog-to-Digital
Logarithmic, Pg 48
Converters
High-Speed, Pgs 52-53
Comparators, Pg 52
High-Speed Buffers, Pg 53
Field Bus Systems

Factory Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36-42
RS-485 Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
PROFIBUS Transceivers/CAN Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
1394/USB/UART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-42
Isolation
Digital Coupler and Isolation Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-44
Difference, Pg 48
ADCs, Pg 56
Instrumentation, Pgs 49-50
Programmable Gain, Pg 55

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-47
Selection Tables
Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-54
Difference/Log/Isolation Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Instrumentation Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-50
Operational Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Comparators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
High-Speed Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-53
High-Speed Amplifiers, Buffers, PWM Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-54
Power Operational Amplifiers, Temp Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
4-20mA Transmitters and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Voltage References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Data Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-63
ADCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-59
Intelligent ADCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
DACs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60-63
Digital Signal Processors (DSPs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Microcontrollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64-65
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65-69
1394, UARTs, USB, PCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68-69
Power and Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-73
Standard Linear and Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
SAR
Sensor Conditioners
4-20mA Transmitters,
Pg 55
SAR ADCs, Pgs 57-59
Intelligent
Isolation Amplifiers, Pg 48
Intelligent ADCs,
Pg 60
INTERFACE Pgs 65-70

LVDS/
MLVDS
RS-485/422
CAN
Application Reports
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Worldwide Technical Support

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Texas Instruments 1Q 2006
Complete Industrial Solutions from TI

Power
Supply Control
Battery
Management
Hot
Swap
Special
Functions
Voltage References, Pg 55
Processors
DSP and
FPGA Power
Outputs
REF
DAC
Amp
Digital-to-Analog
Converters
DSP
Digital
Power
Power Op Amps,
Pg 54
Clocks &
Timers
TMS320C28xTM Digital
Signal Controllers, Pg 63
PWM
Drivers
Microcontrollers
PWM Power Drivers,

Pg 53
DACs, Pg 60
MSP430
Microcontrollers, Pgs 64-65
String
Power and
Control
Power + LogicTM, Pg 70
String DACs, Pgs 60-62
Temperature
Sensors
R-2R
Digital Temperature Sensors, Pg 54
R-2R DACs, Pgs 60-62
Serial Gigabit
Transceiver
USB
PCI
1394
UARTs
GTLP/ VME
Pressure
Pressure sensors convert a physical valueweight, tire

pressure, level, force, and flowinto a differential signal
in the mV/V range and are referred to as metal thick-film,
ceramic or piezo-resistive. The majority of designers use
the cost-effective piezo-sensors (25mbar 25bar).
However, these are very nonlinear, temperature dependent
and have large offset and offset drift. Plus, they require
attention to electronic calibration and compensation.
Transmitter
Sensor Signal Conditioning
EEPROM
ADC
Linearization
Circuit
Int
Temp
Digital Processing
The diagram (at right) shows the functional block diagram

of a pressure signal conditioning system.
Linearization
Circuit
Excitation
Sensor Signal Conditioning performs all necessary

functions to calibrate, compensate for temperature
variance, scale, and linearize the sensor signal.
Look-Up and
Interpolation Logic
0-10V /
4-20mA
Output
Over/Under
Scale Limiter
Non-Linear
Int
Temp
EEPROM
Linearization
DAC
Fault Monitor
Bridge
Analog Processing
Transducer
System Reference
24VDC/2.7V - 5.5V
Supply Voltage
DC/DC
Conversion
Ref
Pressure system functional block diagram.
Calibration parameters are stored in an external nonvolatile memory to

eliminate manual trimming and achieve long-term stability. An evaluation
module, PGA309EVM (see below) includes software and calibration
sheet for easy evaluation of your sensor + PGA309 combination.
2.7
Uncorrected
Bridge Output
2.1
Nonlinaerity (%FSR)
Look-Up and
Interpolation Logic
psi
50
Analog/Digital Processing there are two ways to

convert and linearize the sensor signal. The analog technique
results in an analog solution and provides an analog
output. This technique is inexpensive and fast, but limited
to a maximum of 11- to 16-bit resolution. Digital is more
precise, up to 24 bits, and provides a digital output at
moderate speed.
Interface
RS-485/CAN/
Profibus
SVS
2.4
Micro
Controller
The highly integrated, CMOS PGA309, available in TSSOP-16, is

tailored for bridge pressure sensors and adds to TIs portfolio of highly
flexible, lowest noise amplifier and instrumentation amplifier solutions
that also include the OPAx227, OPAx132, OPA335, OPA735, INA326,
INA327, INA118 and INA122.
1.8
1.5
1.2
0.9
0.6
0.3
Corrected
Bridge Output
0
0.3
0
5
4
6
Bridge Output (mV)
PGA309 bridge pressure nonlinearity correction.
10
Power
Supply
+
The bridge excitation linearization circuit is optimized for

VCC
bridge pressure nonlinearities with a parabolic shape
PRG
(see above). The linearization circuit is digitally
RS232
VIN
programmable, but the pure analog signal conditioning
GND
side is handled by the same process as in TIs wellPC
SDA
known 4-20mA transmitters, such as XTR105, XTR106 or
SCL
XTR108. The heart of the PGA309 is a precision, lowdrift programmable gain instrumentation amplifier using
PGA309
an auto-zero technique and includes a programmable
PC Interface Board
Temperature
fault monitor and over/underscale limiter. It also offers a
Chamber
digital temperature compensation circuit. Calibration is
carried out either via a one-wire digital serial interface Block diagram of the PGA309EVM module.
or through a two-wire industry-standard connection.
Customer
Sensor
VS
PRG
VOUT
PGA309
10nF
GND
EEPROM
PGA309
Sensor Interface Board
40C < Temperature < +125C
Pressure
Input

Complete Voltage-Output, Programmable Bridge
Sensor Signal Conditioner
PGA309
Pressure
Zero-Drift, Low Offset, Single-Supply Op Amps

OPA334, OPA335
Get samples, datasheets, EVMs and app reports at:
www.ti.com/sc/device/OPA334, www.ti.com/sc/device/OPA335

www.ti.com/sc/device/PGA309
Real-world sensors have span and offset errors, ever changing over
temperature. In addition, many bridge pressure sensors have a
nonlinear output with applied pressure. The sensor conditioner,
PGA309 is an ideal choice in combination with low-cost piezo resistive
or ceramic thin-film pressure sensors.
Key Features
Ratiometric or absolute voltage output
Digitally calibrated via single-wire or two-wire interface
Eliminates potentiometer and trimming
Low, time-stable total adjusted error
+2.7V to +5.5V operation
Packaging: small TSSOP-16
The OPA334 and OPA335 CMOS op amps use auto-zeroing techniques

to simultaneously provide very low offset voltage and near-zero drift
over time and temperature. These high-precision amps offer high input
impedance and rail-to-rail output swing. New, OPA333 available 1Q
2006.
Key Features
Low offset voltage: 5V (max)
Zero drift: 0.05V/C (max)
Quiescent current: 285A
Packaging: SOT23-5, SOT23-6, SO-8, MSOP-10 (dual)
Applications
Transducer applications
Electronic scales
Temperature measurement
Applications
Bridge sensors
Remote 4-20mA transmitters
Strain, load, weight scales
Automotive sensors
VEX
R1
+5V
R R
R R
OPA335
VOUT
VS
VEXC
psi
50
Non-Linear
Bridge
Transducer
VREF
Linearization
DAC
Analog Sensor Linearization
Fault
Monitor
R1
Ref
Linearization
Circuit
Auto-Zero
PGA
Over/Under
Scale Limiter
OPA335 5V supply bridge amplifier.

Linear VOUT
Analog Signal Conditioning

Digital Temperature
Compensation
Ext
Temp
DIGITAL CAL
Int
Temp
Ext Temp
Temp
ADC
Control Register
Interface Circuitry
EEPROM
(SOT23-5)
PGA309 functional block diagram.
Pressure
24-Bit, ADC with Excellent AC and DC

Performance
ADS1271
The ADS1271 is a 24-bit, delta-sigma ADC with up to 105kSPS data

rate. It offers the unique combination of excellent DC accuracy and
outstanding AC performance. The high-order, chopper-stabilized
modulator achieves very low drift with low in-band noise. The onboard
decimation filter suppresses modulator and signal out-of-band noise.
The ADS1271 provides a usable signal bandwidth up to 90% of the
Nyquist rate with only 0.005dB of ripple.
Key Features
AC performance:
SNR: 109dB
Bandwidth: 50kHz
THD: 105dB
DC accuracy:
Offset drift: 1.8V/C
Gain drift: 2ppm/C
Only 35mW dissipation in low-power mode
Applications
Ideal for vibration/modal analysis, acoustics,
dynamic strain gages and pressure sensors
AVDD
DVDD
SYNC/ PDWN
MO DE
Control
Logic
CLK
AINP
M odulator
Digital
Filter
Serial
Interface
AINN
ADS1271
AGND
ADS1258
www.ti.com/sc/device/ADS1258

www.ti.com/sc/device/ADS1271
VREFP VREFN
Fastest Cycling/Lowest Latency 24-Bit ADC
DRDY/ FSYNC
SCLK
DOUT
DIN
FORM AT
The ADS1258 is a 16-channel, 24-bit delta-sigma ADC. The flexible

multiplexer with external access allows the inclusion of a common
gain stage prior to the ADC input. On-chip temperature, supply and
reference monitors help to ensure system integrity with very low
conversion latency of any 42s which enables channel cycling at
23.7kSPS.
Key Features
Data rate: 125kSPS
Only 42s latency:
Channel cycle at 23.7kSPS
Measure all 16 inputs in <672s
Performance:
12V RMS noise at 23.7kSPS cycling
Offset drift: 0.02V/C
Gain drift: 0.04ppm/C
Flexible multiplexer structure:
16 single-ended or 8 differential inputs
External access for common gain stage
Auto-scan for low software overhead
Single or dual-supply operation:
Analog: single 5V or 2.5V
Digital: 2.7V to 5V
Applications
High-speed, multiple-sensor data acquisition
Fast scanning of pressure, strain gage, temperature,
+5V
current/voltage inputs
VREFP AVDD
8 Differential
Inputs
or
16 Single-Ended
Inputs
M
U
X
ADS1258
24-Bit,
ADC
DGND
ADS1271 block diagram.
+5V
OPA2335
OPA2335
ADS1258 functional block diagram.
Pressure
Device Recommendations
Device
Description
Key Features
Benefits
Other TI Solutions
Power Management Products

DCP012405B 1W/5V DC/DC Converter
TPS71501
LDO: 24V/1.2V to 15V
Fully Integrated DC/DC Converter in a Miniature

Package, High Isolation and Regulated Output,
Smallest Height in the Industry
Adjustable LDO, Ultra-Low Quiescent Current 3.5A to 50mA Excellent for Low-Power Applications up to 1.2V
TPS54xx SWIFTTM Family,

Highest Efficiency DC/DC
Converter w/Integrated FET
LM317, Lowest Cost
LDO with 37V Input
ADS1218, Core of MSC121x
Family with Additional Flash
Miniature 24V DC/DC Converter with 1500V Galvanic

Isolation, Integrated 5V LDO
Data Converters
ADS1256
24-Bit ADC
24-Bit ADC, Input Buffer, PGA, Digital I/O
ADS1258
MSC121x
24-Bit, 16-Channel ADC

8051-Based MCU with
ADS1218 Converter
Including Flash Memory
24-Bit, 105kSPS ADC
24-Bit ADC, 125kSPS Data Rate

24-Bit ADC, Filters, PGA, Digital I/O, Sensor Excitation,
Burn-Out Current Sources, Offset DACs, Four 16-Bit
DACs, Temperature Sensor
Low Offset Drift: <1.8V/C, Passband Ripple <0.005dB,
THD <105dB
Highest Resolution (23 Bits Noise-Free) and Lowest

Input NoiseUp to 30kSPS
Flexible Multiplexer Structure, On-Chip Temperature
Lowest Noise and Highest Integration in the Market,
Includes All Necessary External Circuitry
All-in-One Solution
24-Bit ADC with DC Accuracy Plus AC
Performance at Highest Speed up to 105kSPS
Small Package, High Initial Accuracy, Low Drift
15ppm/C Stable Reference for Precise Data Conversion
ADS1271
MSC1200, Low-Cost
Version without DACs
PCM4202, PCM4204
References
REF3125/30/ References
33/40
REF3212/20/25 References
30/33/40
Small Package, Excellent Low Drift Performance
REF30xx with Max

50ppm/C Drift
4ppm/C, 100A, 4-Wire Connection, Portable Applications REF31xx
Amplifiers
OPA335
Zero-Drift Op Amp
INA326
High-Precision
Instrumentation Amp
4-20mA Transmitter
Including Sensor Excitation
Programmable
Pressure Sensor
Conditioner
Digital Temp Sensor
Includes All Functions to Generate 4-20mA Output Signal

and Bridge Excitation
Includes Sensor Excitation, Linearization and TemperatureCompensated Conditioning, ADC, DAC, Temp Sensor
Best Long-Term Stability for Industrial Use, Single Supply,

Best in Class, Automotive Temp Range
Low Noise, Excellent Long-Term Stability,
Dual Supply Not Required
Lowest Cost All-in-One Solution (<$1) Up to 36V Supply
Voltage, no Need for DC/DC Converter
Fully Integrated Sensor Conditioning System On a Chip
(SOC), Small Package, Only 16-Bit ASSP on the Market
Integrated Temp Sensor, ADC and SPI Interface

to Convert Valve Temp into Digital Code
High Resolution and Accuracy, Extended Industrial

Temperature Range, SOT-23 package
OPA735, 12V Version with

Improved Noise and Drift
INA337, Automotive Temp
Range, 40C to +125C
XTR110 is Intended for
3-Wire Output
XTR108, Similar but is Targeted
for PT100, Temp Sensors
Included, 4-20mA Transceiver
TMP175
(SMB-Bus Interface)
SN65HVD1176 PROFIBUS Transceiver
Interfaces PROFIBUS Fieldbus to System Controller
SN65HVD251 CAN-Bus Transceiver
Interfaces CAN-Fieldbus to System Controller
Optimized for PROFIBUS, Up to 160 Users per Bus,

Up to 40Mbps
Improved Drop-In Replacement for PCA82C251,
Tolerates 200V Transients
SN65HVD485E,
Low-Cost Version
SNHVD233
(3.3V Version)
Reduces Heat in Sensor System, Reduces Cost of Power

Source and Increases Lifetime
MSP430Cxx without
Flash , Even Lower Power
XTR115
PGA309
TMP121
CMOS 0.05V/C Drift, 5V Offset, RRIO at 3.3VDC,

Single Supply
Single Supply 30nV/ Hz Noise, RRIO, CMOS
Interface
Processor
MSP430F1121 16-Bit MCU with Flash
Lowest Power MCU in the Industry, 6s Wake-Up

Weigh Scales
Electronic weigh scales are found in many industrial applications in

some shape or form and are ubiquitous in todays food industry.
Manufacturers of electronic weigh scales traditionally choose
proprietary ASICs to tailor the performance of their analog front end
for highest accuracy and stability. The diagram below shows an
approach using standard products offering up to 23 noise-free bits of
resolution.
A major challenge in designing weigh scales is the sampling of
multiple load cells while offering extremely low input referred noise
(RTI). The ADS1256 and ADS1232 offer input referred noise of 30nV
and 17nV, respectively. Another important factor is the analog circuitrys
long-term stability with regard to offset drift and gain. Here the accuracy
of the amplified input signal, either single-ended or differential, must
be guaranteed over years of operation. Auto-zero amplifiers, such as
the OPA335 and the INA326 instrumentation amplifier, meet these
stringent requirements by achieving offset drifts of 0.05V/C
(OPA335) and 0.4V/C (INA326).
For an easy-to-use solution, the MSC1210 family offers a complete
data acquisition system on a chip comprised of:
An optimized 8051 core, (3-times faster than standard version at
same power)
A 24-bit, ADC with 22 ENOBs and 75nV (RTI)
A PGA with gain steps from 0 to 128
2kB boot ROM and up to 32kB Flash memory
Keypad
Resistors,
Capacitors
Memory
LCD
Crystal
Load
Load
Cell
Load
Cell
Load
Cell
Cell
Amp
Amp
Analog
Filter
ADC
1
4
2
5
3
6
MSP430
Optional
Battery
Lead Acid
4A-H
LDO
Reg. 3.3V
LDO
Reg. 5V
Basic weigh scale application.
Complete, High-Precision Weigh Scale Solution

ADS1232, ADS1234
Get samples, datasheets and app reports at:
www.ti.com/sc/device/ADS1232, www.ti.com/sc/device/ADS1234
The ADS1232 and ADS1234 are designed as highly integrated deltasigma ADCs for low-level, high-precision measurements, especially for
weigh scale applications. The devices are comprised of a low-drift,
low-noise instrumentation amplifier and a high-order, chopper-stabilized
modulator followed by a digital filter in a monolithic device.
Selectable gains of 1, 2, 64 or 128 allow full-scale differential input
ranges of 2.5V to 19.5mV with a +5V reference. They also include a
low-drift onboard oscillator as well as external crystal oscillator for
the precise output data rate to reject both 50Hz and 60Hz simultaneously.
ADS1232 and ADS1234 output data at 105SPS or 80SPS and are the
ideal choice for weigh scale as well as bridge sensor applications.
Key Features
Complete front-end solution for weigh scales
Very low noise PGA:
Only 17NV input-referred noise with gain of 128
High performance ADC:
23.5 effective bits with gain of 1
Onboard low-drift oscillator with optional external clocking
Excellent 50Hz and 60Hz rejection: 100dB (min)
Packaging:
ADS1232: 24-lead TSSOP
ADS1234: 28-lead TSSOP
Applications
Weigh scales
Bridge sensors
Strain gauges
Pressure sensors
PROFIBUS
ASIC SPC3
Isolation
SN65HVD1176
PROFIBUS
Transceiver
PROFIBUS
CAP
AVDD
REFP REFN DVDD

GAIN [1:0]
AINP1
AINN 1
AINP2
PDWN
A = 1, 2,
64, 128
Input
M ux
AINN 2
AINP3
AINN 3
PGA
DRDY
/ DOUT
ADC
MSP430
SCLK
AINP4
AINN 4
Internal Oscillator
SPEED
External Oscillator
A1/T EM P1 A0 AGND CAP XTAL1
XTAL2 DGND
/ CLKIN
NOTE: A1 for ADS1234, TEM P for ADS1232
ADS1234 Only
Weigh scale application using ADS1232.
Weigh Scales

Device
Description
Key Features
Benefits
Other TI Solutions
Low-Power 150mA,
Low-Dropout (LDO)
Linear Regulator
Regulates 6V to 3.3V and 5V
Small Package
TPS76333
OPA335
Zero-Drift Op Amp
INA326
High-Precision
Instrumentation Amp
Programmable
Pressure Sensor
Conditioner
0.05V/C Drift, 5V Offset, RRIO at 3.3VDC Single Supply Best Long-Term Stability for Industrial Use, No Need for Dual
Supply, Best in Class, Automotive Temp Range
30nV/ Hz Noise, RRIO, Single Supply
Lowest Noise in Industry and Best Long-Term Stability,
No Need for Dual Supply
Includes Sensor Excitation, Linearization and Temperature- Fully Integrated Sensor Conditioning System On a Chip
Compensated Conditioning, ADC, DAC, Temp Sensor
(SOC), Small Package, Only 16-Bit ASSP on the Market,
Included 4-20mA Transceiver
OPA735, 12V Version

of OPA335
Range 40C to +125C
XTR108, Similar but is
Targeted for PT100,
Temp Sensors
24-Bit, 30kSPS
ADC w/Multiplexer
24-bit, 80SPS, ADC
Very Low Noise ADC with Programmable Data Rates

Up to 30kSPS
Very Low Noise PGA, 24-Bit ADC, Onboard Oscillator
Higher Data Rates, Very Low Noise
MSC1210
Complete Front-End Solution for Weight Scales
ADS1244/5
PROFIBUS RS-485
CAN-Bus Transceiver
Optimized for PROFIBUS, 2.1V min., VOD Low Bus Cap.

Improved Signal Fidelity and Enhanced Transmission Reliability SN65HVD05

SNHVD233

TPS76301
Amplifiers
PGA309
Data Converters
ADS1256
ADS1232
Interface
SN65HVD1176
SN65HVD251
Processor
MSP430F413
16-Bit, Ultra-Low-Power 8kB Flash, 256 RAM, Comparator, 96 Segment LCD

controller
Low-Power, Integrated LCD Driver and Flash
MSP430F417
10
Temperature
Temperature is the most frequently measured physical parameter and

can be measured using a diverse array of sensors. All of them infer
temperature by sensing some change in a physical characteristic.
Three of the most common types are Thermocouples, Resistance
Temperature Detectors (RTDs), and NTC-Thermistors.
Voltage
Temperature
Thermistor
Resistance
RTD
Resistance
Thermocouple
Temperature
Temperature
Common types of thermocouples, RTDs and NTC-thermistors.
Thermocouples consist of two dissimilar metal wires welded

together to form two junctions. Temperature differences between the
junctions cause a thermoelectric potential (i.e. a voltage) between the
two wires. By holding the reference junction at a known temperature
and measuring this voltage, the temperature of the sensing junction
can be deduced. Thermocouples have very large operating temperature
ranges and the advantage of very small size. However, they have the
disadvantages of small output voltages, noise susceptibility from the
wire loop, and relatively high drift.
Resistance Temperature Detectors (RTDs) are wire winding or
thin-film serpentines that exhibit changes in resistance with changes
in temperature. While metals such as copper, nickel and nickel-iron are
often used, the most linear, repeatable and stable RTDs are constructed
from platinum. Platinum RTDs, due to their linearity and unmatched
long-term stability, are firmly established as the international temperature
reference transfer standard. Thin-film platinum RTDs offer performance
matching for all but reference grade wire-wounds at improved cost,
size and convenience. Early thin-film platinum RTDs suffered from drift,
because their higher surface-to-volume ratio made them more
sensitive to contamination. Improved film isolation and packaging have

since eliminated these problems making thin-film platinum RTDs the
first choice over wire-wounds and NTC thermistors.
NTC Thermistors are composed of metal oxide ceramics, are low
cost, and the most sensitive temperature sensors. They are also the
most nonlinear and have a negative temperature coefficient.
Thermistors are offered in a wide variety of sizes, base resistance
values, and Resistance vs. Temperature (R-T) curves are available to
facilitate both packaging and output linearization schemes. Often two
thermistors are combined to achieve a more linear output. Common
thermistors have interchangeabilities of 10% to 20%. Tight 1%
interchangeabilities are available but at costs often higher than
platinum RTDs. Common thermistors exhibit good resistance stability
when operated within restricted temperature ranges and moderate
stability (2%/1000 hr at 125C) when operated at wider ranges.
Low-Cost PT100 Linearization Circuit for 0C to 400C
A low-cost RTD measurement circuit with linearization is achieved
with just one dual operational amplifier, OPA2335, and seven resistors.
The first stage linearizes a PT100 sensor over a temperature range
from 0C to 400C, yielding a maximum temperature error of 0.08C.
R1 defines the initial excitation current of the RTD. R3 and R4 set the
gain of the linearization stage to ensure the input of A1 stays within its
common-mode range. Rising temperature increases VO1. A fraction of
VO1 is fed back to the input via R2 for linearization. Resistors, R1 R4,
are calculated so that the maximum excitation current through the RTD
is close to 100V to avoid measurement errors through self-heating.
VS = 5V
R2
R1
3.57k
A2
R3
37.4k
R7
R4
5.05k
14.447k
R6
23.7k
OPA2335 PT100 linearization circuit.

4.5
0.08
0.06
0.04
3.5
3
0.02
VOUT (V)
Thermistor
Low
Short to Medium
100F to +500F
Poor to Fair
Poor
Medium
Fair to Good
Very High
Medium to Fast
Poor
High
Good
Low
Small to Medium
Temperature (C)
Interchangeability
Long-Term Stability
Accuracy
Repeatability
Sensitivity (Output)
Response
Linearity
Self Heating
Point (End) Sensitive
Lead Effect
Size/Packaging
RTD
High
Wide
400F to +1200F
Excellent
Good
High
Excellent
Medium
Medium
Good
Very Low to Low
Fair
Medium
Medium to Small
1/2
OPA2335
1/2
OPA2335
RTD
Thermocouple
Low
Very Wide
450F to +4200F
Good
Poor to Fair
Medium
Poor to Fair
Low
Medium to Fast
Fair
No
Excellent
High
Small to Large
VO1
A1
Comparison of Temperature Sensor Attributes

Criteria
Cost-OEM Quality
Temperature Range
R5
37k
10.928k
0.0
0.02
0.04
0.06
2.5
2
1.5
VOUT1
VOUT2
0.5
0.08
0
0
50
100
250
150
200
Temperature (C)
temp vs. temp.
300
350
400
50
100
150
200
250
Temperature (C)
300
350
VOUT vs. temp.
400
11
Temperature
The second stage performs offset and gain adjustment. Here the linear
slope of VO1 is readjusted to provide a VO2 slope of 10mV/C within an
output range of 0.5V to 4.5V.
excellent accuracy. For detailed information on the calculation of the

resistor values for various temperature ranges, refer to the XTR112
data sheet.
Temperature Measurement of a Remote 3-Wire RTD via a

4-20mA Current Loop
Temperature Measurement with a K-Type Thermocouple Using

Wired Cold-Junction Compensation (CJC)
This circuit measures the temperature of a remote 3-wire RTD using the
4-20mA current transmitter, XTR112. The device provides two matched
current sources for RTD excitation and line-resistance compensation.
Internal linearization circuitry provides 2nd-order correction to the RTD,
thus achieving a 40:1 improvement in linearity. IR1 is the excitation
for the RTD. IR2 is the compensation current flowing through RZ and
RLINE1. By choosing the value of RZ to be equal to the RTD resistance at
minimum temperature, the internal instrumentation amplifier (INA) only
measures the temperature dependent difference in RTD resistance.
This thermocouple measurement circuit uses the auto-zero, singlesupply amplifier, OPA335. A precision voltage reference, REF3040,
provides the 4.096V bridge supply. The forward voltage of diode, D1,
has a negative temperature coefficient of 2mV/C, and provides the
cold-junction compensation via the resistor network R1 to R3. The zero-
On the current-loop side, transistor, Q1, conducts the majority of the

signal-dependent 4-20mA loop current. This isolates most of the power
dissipation from the internal precision circuitry of the XTR112, maintaining
0.1F
R5
31.6k
D1
+5V
0.1F
R2
2.94k
+ +
R2
549
OPA335
R6
200
K-Type
Thermocouple
40.7V/C
R4
6.04k
VO
Zero Adj.
R3
60.4
OPA335 temperature measurement circuit.
VLIN
RLIN1(1)
R8
150k
R1
6.04k
RCM is used to provide an additional voltage drop to bias the inputs of

the XTR112 within the common-mode input range. The 0.01F bypass
capacitor minimizes common-mode noise. RG sets the gain of the INA.
For 2nd-order linearization, a fraction of the INA output voltage is fed
back via the resistors, RLIN1 and RLIN2. Internally, the output voltage is
converted into a current and then added to the return current, IRET, to
yield an output current of IO = 4mA + VIN 40/RG.
4.096V
REF3040
+5V
+
VIN
RLIN2(1)
IO
IR1
IR2
VREG
V+
RG
XTR112
XTR114
(1)
RG
RG
Q1
E
IO
VIN
IRET
EQUAL line resistances here

creates a small common-mode
voltage which is rejected by
XTR112 and XTR114.
2
RZ
IO
1
RCM
(RLINE2)
RTD
Resistance in this line causes a

small common-mode voltage
which is rejected by XTR112 and
XTR114.
NOTE: (1) Provides predictable output current

if any one RTD connection is broken:
(RLINE1)
Q2(1)
2N2222
OPEN RTD
TERMINAL
1
2
3
XTR112
XTR114
IO
IO
1.3mA
27mA
1.3mA
1mA
27mA
1mA
(RLINE3)
3
Temperature measurement of a remotely located RTD.
12
Temperature
adjustment for a defined minimum temperature is achieved via R6,

while R7 and R8 set the gain for the output amplifier. The OPA335
provides a high DC open-loop gain of AOL = 130dB, allowing 16-bit+
accuracy at high gain in low-voltage applications. The auto-zero
operation removes the 1/f noise and provides an initial offset of 5V
(max) as well as an extremely low offset drift over temperature of
0.05V/C (max). Thus the OPA335 ideally suits single-supply, precision
applications where high accuracy, low drift and low noise are imperative.
Autonomous Temperature Measurement System for Multiple
Thermocouples Using MSC1200
This temperature measurement system measures the differential
output voltage of four different types of thermocouples, (TC1TC4), and
one reference temperature using the mixed-signal controller, MSC1200.
The MSC1200 incorporates a ADC with 22-bits of effective resolution, with a versatile input multiplexer, a selectable input buffer, and a
programmable gain amplifier (PGA) with gain adjustments from 1 to
128. The device includes on-chip Flash and SRAM memory and an
improved 8051-CPU, running 3-times faster than the initial standard
version at the same power consumption. An on-chip current digital-toanalog converter, (I-DAC), provides excitation current to the RTDs and
thermistors.
Integrated Current Sources Allow for Sensor Burn-Out Detection

In the case of remotely located thermocouples, input RC low-pass
filters remove differential and common-mode noise, which might have
been picked up by the thermocouple leads running through a noisy
environment. For the various types of thermocouples, different PGA
settings may be required to reduce the analog input impedance. Low
input impedance can cause compensation current to flow through a
thermocouple. These currents disturb electron density (which the
Seebeck effect is based on) thus generating wrong thermo-EMF
readings at the thermocouple output. To provide consistently high input
impedance, the input buffer must be enabled. This however reduces the
input common-mode range to 50mV above analog ground and 1.5V
below the positive analog supply. To ensure that the thermocouple
signals are within that range, each input is biased via a 10k to
100k resistor. The bias voltage is provided by the precision voltage
reference circuit, REF3112, which has an initial error of 0.2% and a
temperature drift of 15ppm/C.
Cold-Junction Compensation
Cold-junction compensation (CJC) is performed by reading the output
voltage across a linearized thermistor circuit via AINCOM.
Multi-channel temperature measurement system.
13
Temperature
The versatility of the input mux allows assigning the positive and
negative inputs of the buffer to any of the analog input pins. Thus, to
measure the reference temperature differentially, one buffer input is
connected to AINCOM, while the other input is connected to the lowend input of any of the thermocouples (AIN1, 3, 5 or 7). However, once
an input has been selected, all subsequent differential measurements of
the reference temperature should be made against the same low-end
input. If the MSC1200 is close to the isothermal block, and based on
the required accuracy, the on-chip temperature sensor could be used
for CJC.
In this application, the temperature to be controlled is set by the DAC.

If the temperature of the TEC rises above the set temperature, TEC
current flows in one direction for cooling. If the temperature falls
below the set-point, the current direction is reversed and the TEC
heats. The dotted line indicates closed-loop thermal feedback from
the TEC to the thermistor, which it is mechanically mounted to, but
electrically isolated from.
Constant Temperature Control for Thermoelectric Coolers with
INA326
The INA326 is a high-performance, low-cost, precision instrumentation
amplifier with rail-to-rail input and output. Its a true single-supply
instrumentation amplifier with very low DC errors and input
common-mode ranges that extend beyond the positive and negative
rail. These features make it suitable for general-purpose to highaccuracy applications.
Constant Temperature Control for Thermoelectric Coolers with

INA330
The INA330 is a precision amplifier designed for thermoelectric cooler
(TEC) control in optical networking and medical analysis applications. It
is optimized for use in 10k thermistor-based temperature controllers.
The INA330 provides thermistor excitation and generates an output
voltage proportional to the difference in resistances applied to the
inputs. It uses only one precision resistor plus the thermistor, thus
providing an alternative to the traditional bridge circuit. This new
topology eliminates the need for two precision resistors while
maintaining excellent accuracy for temperature control applications.
The INA330 offers very low 1/f noise throughout the life of the product. The low offset results in a 0.009C temperature error from 40C
to +85C.
Excellent long-term stability and very low 1/f noise assure low offset
voltage and drift. The INA326 is a two-stage amplifier with each gain
stage set by R1 and R2, respectively. Overall gain is described by the
equation: G = 2 R2/R1.
The INA326 measures the difference between the voltage of the
temperature set-point (R7), and the voltage across the thermistor
(RTHERM). The differential input voltage is amplified by a factor of 100
(G = 2 100k/2k) and fed, via an RC-lowpass filter into the PID
controller. R14, C7 is an output filter that minimizes auto-correction
circuitry noise.
An excitation voltage applied to the inputs, V1 and V2, creates the

currents, I1 and I2, flowing through the thermistor (RTHERM) and the
precision resistor (RSET). An on-chip current-conveyor circuit produces
the output current, IO = I1 I2. The output current, flowing through the
external gain-setting resistor (RG) is buffered internally and appears at
the VO pin. Any bias voltage applied to the other side of RG adds to the
output voltage, so that VO = IO RG + VADJUST. This output voltage
feeds a PID controller, which provides the input voltage to a TEC driver
in bridge-tied-load configuration. The two operational amplifiers (OPA569)
are CMOS, single-supply power amplifiers capable of driving load
currents of up to 2A at 3V supply.
Enable
+5V
+5V(2)
VREF(1)
+5V
C1
VO
V1
V2
TEC DRIVER AMPLIFIER OPTIONS

OPA569
DRV591
DRV593
DRV594
ADS7820
PID
R2
R4
C2
4k
1V(1)
The PID controller shown uses separate adjustment stages, allowing

for optimized adjustment of controller parameters to the closed-loop
system. Once these parameters have been determined, the existing
circuitry consisting of five op amps for PID, summing and loop-gain
adjustment can be converted into a single amplifier PID controller.
R1
3.3V
3.3V
C3
R3
2A Linear Amplifier
3A PWM Power Driver
3A PWM Power Driver
3A PWM Power Driver
Complete multichannel TEC control
Analog Front End includes ADC, DAC and INA
10k
1k
I1
10k
OPA569
TEC
OPA569
OPA348
Cooling
I2
10k
10k
CFILTER
500pF
RG
200k
VREF(1) = +5V
D/A
Converter
VADJUST = 0V to 5V
= 2.5V at 25C Set-Point
INA330 in TEC application.
Temperature
Adjust
NOTES: (1) Ratiometrically derived

voltages.
(2) The INA330 can also use a 3.3V,
supply; however, components must be
chosen appropriate to the smaller
output voltage range.
RSET
10k
10k
10k
VBIAS(1)
2.5V
Thermistor
RSET = 10k
10W
+5V
VREF(1)
+5V
IO = I 1 I 2
INA330
indicates direction of voltage

change for rising temperature at the
thermistor.
14
Temperature
INA326 PID controller.
Digital Temperature Sensors with Two-Wire Interface

TMP75, TMP175
www.ti.com/sc/device/TMP75, www.ti.com/sc/device/TMP175
The TMP75 and TMP175 are two-wire, serial-output temperature

sensors. The devices require no external components and are capable
of reading temperatures with a resolution of 0.0625C. The two-wire
interface is SMBus compatible, which allows the TMP175 to have up
to 27 devices on one bus and the TMP75 eight devices. Both feature
SMBus alert functions and are ideal for extended temperature
measurements found in industrial environments.
Temperature
SDA
SCL
ALERT
Key Features
27 addresses (TMP175)
8 addresses (TMP75)
Digital output: two-wire serial interface
Resolution: 9- to 12-bits, user selectable
Accuracy:
1.5C (max) from 25C to +85C
2.0C (max) from 40C to +125C
Low quiescent current: 50A, 0.1A standby
Wide supply range: 2.7V to 5.5V
Packaging: SO-8, MSOP-8
GND
Diode
Temp.
Sensor
Control
Logic
A/D
Converter
OSC
V+
A0
Serial
Interface
6
Config.
and Temp.
Register
A1
A2
TMP175, TMP75
TMP175 functional block diagram.
Applications
Power-supply temperature monitoring
Computer peripheral thermal protection
Thermostat controls
Environmental monitoring and HVAC
Electromechanical device temperature
15
Flow Metering
The application requirements of flow measurement in industrial

settings varies from low cost to very high precision and fast flow
metering found in petrochemical and pharmaceutical plants. This
section contains explanations of the most common techniques and
offers various solutions for overcoming flow measurement obstacles.
The Magnetic-Inductive Flowmeter

The magnetic-inductive flowmeter consists of a non-ferromagnetic
tube wrapped with a magnetic coil. Electrodes in the tubes inner
isolated surface are in contact with the liquid (must be conductive)
that flows through the tube.
The coils around the pipe generate a magnetic field within the tube.
The magnetic field inducts a voltage in the liquid, which is proportional
to the speed of the liquid in the tube. This voltage is measured via the
electrodes. As the measured voltage is very low, precise low-noise
instrumentation amplifiers, such as the INA103, options are needed at
the amplifier front end. Usually the voltage is digitized with precision
ADCs such as the ADS1252.
The Coriolis Flowmeter

The coriolis flowmeter consists of a tube, which is forced into
oscillation by a low-frequency power driver. Liquid particles flowing
through the tube are deviated by the mechanical oscillation of the
tube. These deviations are different in their signs, depending on their
distance to the position of the power source. Close to the power
source, the particles of the liquid are accelerated. In the area of the
mechanical sensors the particles are decelerated. In the coriolis flow
meter, the mechanical forces (which are decelerating) are
measured/detected by inductive sensor systems. The very low
resulting voltages are amplified by precision amplifiers and then
digitized. The phase difference between the basic oscillation of the
tube and the resulting inductive sensor signal describes the amount of
mass-flow in the tube.
As the detected voltages are very low, a low-noise precision amplifier in
the sensor front-end is required. For digitizing the measurement signal, a
2-channel precision ADC () is needed as the phase-accuracy between
the two channels has a direct impact on the measurements accuracy.
Differences Between the Two Measurement Techniques
INA103
ADS1252
The magnetic inductive system can only measure the liquids speed
through the tube. As the diameter of the tube is known, the volume of
flow can be calculated. The liquid must have minimal electrical
resistance. Non-conductive liquids cant be measured.
The coriolis technique makes it possible to actually measure the amount
of mass flowing through the tube. This technique is more expensive.
Power
Driver
The magnetic-inductive flowmeter.

INA103
ADS1244
INA103
ADS1244
Y-Axis
Flux Density
Z-Axis
Voltage E
Between
The principle of the magnetic flowmeter.
Power
Driver
The coriolis flowmeter.
X-Axis
Magnetic
Flow
Detector Flow
Tube Induced
Induced Motion Twisting
Magnetic
Detector
Tube
Twist
Operational principle of a coriolis mass flowmeter.
16
Flow Metering
Low-Cost Method:
High-Precision Method:
SIFCH1
N
TPS7701 functional block diagram.
SIFCH0
Gal
SIFCOM
Total
VCC
3V
Sx,COMx
MSP430FW427
RST
Ultra-low-power MSP430 requires <10mA for the complete

metering application
Flow
VSS
Scan I/F
No power transformers required for power supply management
SIFCH2
SIFCH1
SIFCH0
Simple capacitor-tapped power supply coupled with an LDO

d
S1
a
a
S1
S1
c
c
S1
S1
a
d
S1
XIN
XOUT
32,768Hz
JTAG
SIFCH3
SIFCH2
SIFCH1
SIFCH0
TimerA5
SIFCOM
TimerA3
Px.x
AMR Ready
b
SIFCOM
S2
S2
S2
S2
S2
S2
Sensor S1
Sensor S2
MSP430FW427 single-chip flow meter.

Clockwise
Anti-clockwise
Quadrature decoding, detect rotation, direction error detection.
Two LC sensors or one GMR sensor are used (S1, S2)

State machine in scan I/F enable to detect rotation, error and distortion
Quadrature decoding example: Generation of an input signal with

the two LC-type sensors, S1 and S2, are used. If the previous position
of the damped plate is known, together with the current state, the
rotation as well as the direction of rotation can be detected. For the
digital signals, a 0 means the sensor is above the undamped part
of the plate and 1 means it is above the damped area, the metal
part. Additional sensors can be used for redundancy, but two sensors
are sufficient to detect rotation and direction.
Small battery meets life-cycle of 2 calibration periods due to scan I/F

Various sensors and physical conditions are handled
Performance for additional functions e.g. automatic meter reading at
low power
Device
Description
Key Features
Benefits
Other TI Solutions
Voltage Reference
Drift = 20ppm/C 4.097V, 0.2%
Very Low Drift, Tiny Package
REF02, REF102
Isolation Converter, +5VIN, 15VOUT

Low Noise, Small Board Data

Low Noise, Small Board Data
DCP10515
DCP10505
Adjustable Output (0.9V-3.3V), 1.5A
Very Easy to Use, Flexible Output
TPS64200
Excellent Performance
Only 7.5mW, Single 5V Supply
Measure Up to 50kHz Bandwidths,
Easy to Synchronize Multiple Converters
Cost Effective and Highest Integration All in a
Single-Chip Solution
ADS8320, ADS8325
ADS1252
PEM4202
Reference
REF3140
Isolation Products
DCV010515D Dual Converter
DCV010505D Dual Converter

TPS54110
SWIFTTM Buck Controller
Data Converters
ADS8321
ADS1251
ADS1271
16-Bit, 100kSPS
24-Bit, 20kSPS
24-Bit, 105kSPS
Power = 2mW, 8-pin, SFDR = 86dB

Small (8-Pin SSOP) and Easy to Use (Read Only Interface)
AC Performance, DC Accuracy
MSC121x
24-Bit ADC, MCU, REF

DAC, PGA
8051 MCU with Integrated 24-Bit Up to 1kSPS ADC,

16-Bit DACs and Precision Reference, Eight Inputs and PGA
MSC1212, MSC1200
17
Linear Voltage Differential Transformer

Hydraulic valves are used to direct the flow of liquid mediums, most
commonly oil, from input ports to output ports. The direction of flow is
determined by the position of a spool, which is driven by a linear force
motor. Valve electronics are split into three core-subsystems:
5V
1.8V 3.3V
1.8V 3.3V
System and Valve Controller
Supply Voltage and Supervision
Isolated
5V DC/DC
Isolated
24V DC/DC
5V
+5V
LVDT Drive and
Analog Supply
+15V
15V
Motor Drive
Supply
24VDC
nom
(15V-35V)
System
Controller
(FPGA or C)
Power Conversion provides galvanic isolation between the valve

power and the external fieldbus and auxiliary 24V supplies. It also
provides regulated supply voltages to the individual functional blocks.
Signal Isolation
Fieldbus XCVR
Motor
Drive
LPF
Fieldbus Interface and Control provides galvanic isolation between

the system controller and the fieldbus signals. The system controller
translates the incoming data from the fieldbus into valve commands
for the DSP, and vice versa, it translates the valve data from the DSP
into fieldbus signals.
LVDT
Drive
LPF
Valve
Controller
and
Conditioner
(DSP)
Temp
Sensor
LVDT
Sense
Valve Mechanics
LVDT
SPOOL
Pressure
XDCR
XDCR
Sense
Linear
Force
Motor
Valve Electronics
Valve Control performs spool positioning, pressure and temperature

measurement. It also indicates alarm conditions.
The valve controller receives a position command from
the fieldbus via the system controller and drives the
linear force motor until the output signal of the
position sensor (LVDT = Linear Variable Differential
Transformer) equals the input value of the position
command. At the same time, pressure and temperature
are monitored. An alarm condition is indicated if one of
these sensors exceeds a pre-determined safety value.
Dual
LDO
Fieldbus
Dual
SVS
Basic hydraulic valve diagram.

R12
CIN
R11
VPWM
C12
R13
C11
CCM
C22
5V
RS
1/4
TLV2474
5V
RGD
RD/2
L2A
L1
RFD
CDIFF
RGI
INA118
(G=10)
C21
VREF
RD/2
L2B
R22
R21
1/4
TLV2474
VADC
RS
1/4
TLV2474
5V
CCM
VICM = 3V
REF3130
1/4
TLV2474
Device
Description
DSP-controlled, single-supply, LVDT conditioner circuit.
Key Features
Benefits
Other TI Solutions
Universal PWM Controller for 24V, Isolated Boost Converter

Miniature 5V DC/DC Converter with 100V Galvanic Isolation,
Integrated 5V LDO
Two Regulated Output Voltages for DSP Split-Supply Systems
with Power-Up Sequencing, 250mA Output Current
Dual Supervisory Circuit for DSP and Processor Supplies
Including POR Generator
Lowest Cost, Small Package

Fully Integrated DC/DC Converter in Miniature
Package, High Isolation and Regulated Output
Industry's Most Integrated Supply Systems, with
Power Good Indicator, UVL and Thermal Shutdown
Requires No External Capacitors,
Temp-Compensated VREF, Small Package
UCC3813, TL5001
DCP020505
(2W, Unregulated)
TPS70851, TPS70251

UCC3823
DCR010505
PWM Controller
1W/5V DC/DC Converter
TPS70751
Dual LDO: 3.3V/1.8V
TPS3305-18
Dual SVS: 3.3V/1.8V
TPS3306-18, TPS3806I33
Amplifiers
OPA4345
TLV2472
INA118
OPA544
PGA309
TMP121
DRV1xx
Quad, Low-Power Op Amp

Dual, Single-Supply,
High O/P Drive
Single/Dual Supply Inst. Amp
Power Amplifier
Programmable Pressure
Sensor Conditioner
Digital Temp Sensor
Used as Active Low-Pass Filter to Convert PWM into Analog Signal Low Power, Low Offset, Small Package, Low Cost
Drives LVDT Sensor with 25mA
No Cross-Over Distortion in BTL Configuration,
Lowest Supply Voltage, Drives Up to 35mA
Senses LVDT Output with High Linearity
High Linearity at Lowest Supply Voltage
Drives Linear Force Motor (10V/1A)
Class AB amp with Current Limit and Thermal Shutdown
Includes Sensor Excitation, Linearization and TemperatureFully Integrated Sensor Conditioning System on a
Compensated Conditioning
Chip (SOC), Small Package
Integrates Diode Temp Sensor, ADC and SPI Interface to
Convert Valve Temp into Digital Code for the DSP
Temp Range, Ultra Small Package
Low-/High-Side Monitoring Fixed/Adjustable Switching Frequency , 1.2A Output, Wide Supply Ideal for Driving Electromechanical Devices
OPA4340, OPA4346
TLC074, TLC084
INA128
OPA548, OPA549, OPA569
TMP175
(SMBus Interface)
DRV590, DRV591
Interface
Interfaces CAN Fieldbus to System Controller
Optimized for Bus, Up to 160 Users Per Bus, Up to

SN65HVD485E
40Mbps, Benchmarked by Siemens as Reference Device
SNHVD233
(3.3V Version)
18
Current Measurement
Current is one of the most common values measured in industrial

applications. The Motor Control chapter (pages 20-23) describes
precise current measurement using delta-sigma modulators and
precision SAR ADCs that also require galvanic isolation. Another
approach to directly measuring current uses instrumentation amplifiers
which allow direct shunt measurements with common-mode voltages
up to 60V.
Current Shunt Monitor with 16V to +80V

Common-Mode Range
INA193, INA194, INA195, INA196, INA197, INA198
Get samples and datasheets at: www.ti.com/sc/device/PARTnumber
(Replace PARTnumber with INA193, INA194, INA195, INA196, INA197
or INA198)
Get samples and datasheets at: www.ti.com/sc/device/INA138,

www.ti.com/sc/device/INA168, www.ti.com/sc/device/INA170
The INA193 - INA198 family of current shunt monitors with voltage

output can sense drops across shunts at common-mode voltages from
16V to +80V, independent of the supply voltage. The devices are
available with three output voltage scales: 20V/V, 50V/V and 100V/V.
The 400kHz bandwidth simplifies use in current control loops.
The INA138 and INA168 are high-side, unipolar, current shunt monitors
with low quiescent current and are available in SOT23-5 packaging.
Input common-mode and power supply voltages are independent and
can range from 2.7V to 36V (IN138) or to 60V (INA168). The devices
convert a differential input voltage to a current output. The current is
converted back to a voltage with an external load resistor that sets any
gain from 1 to over 100.
Key Features
Common-mode voltage range: 16V to +80V
High accuracy: 3% over temp
Bandwidth: up to 400kHz
Quiescent current: 250A
Three transfer functions available: 20V/V, 50V/V, 100V/V
Packaging: SOT23
Key Features
Wide supply range:
INA138: 2.7V to 36V
INA168: 2.7V to 60V
Unidirectional current: INA138/9, INA168/9
Bidirectional current: INA170
Low quiescent current: 25A
Independent supply and common-mode voltages
Wide temp range: 40C to +125C
Packaging: SOT23-5
Applications
Current shunt measurement in automotive, telephones, computers
Portable and battery-backup systems
Power management
Use in PWM current control loops
16-bit, 1 channel, 250mV input range: ADS1202
16-bit, 4 channels, 0 to 5V input range: ADS1204
High-Side Current Shunt Monitors

INA138, INA168, INA170
Applications
Current shunt measurement in automotive, telephones, computers
Portable and battery-backup systems
Power management
Precision current source
IS
RS
VIN+
V+
Negative
and
Positive
Common Mode
Voltage
VIN
VIN+
Load
5k
5k
A1
IS
RS
VIN+
+
A2
Up to 60V
VIN+
VIN
5k
Load
OUT=
5k
ISRSRL
5k
RL
V+
INA19x functional block diagram.
OUT
VO = ISRSRL/5k
GND
RL
INA138, INA168 functional block diagram.
Motor Control
19
Asynchronous, DC and Servo Motors

Digital Motor Control
Reset
Scalar Control: (V/Hz)

Simple to implement: only three sine waves feeding the
motor are required
Position information not required (optional):
Doesnt deliver good dynamic performance
Torque delivery not optimized for all speeds
Vector control, also called Field Oriented Control, allows designers to
fulfill all of the ideal control requirements. Having information on all
system parameters, such as phase current and bus voltage, allows
delivery of the appropriate power at the right moment thanks to
real-time control made possible by DSP integration and MIPS availability.
iQS
Output Logic
PWM Circuits
Output Logic
Compare Unit 2
PWM Circuits
Output Logic
Compare Unit 3
PWM Circuits
Output Logic
GP Timer 2 Compare
Output Logic
VDS
CLK
DIR
CAP1/QEP1
CAP2/QEP2
CAP3/QEP3
Capture Units
TMS320F2810 functional block diagram.
Servo Motor Control Application and

Featured Products
The figure below is an example of a typical motor control circuit. The
IU, IV and IW channels measure the motors currents. The motors
position/speed and load are measured simultaneously by Ax, Bx, etc.
using resolver or analog encoder sensors. Simultaneously sampling at
least two currents or all three currents is important to achieving maximum
accuracy in motor positioning. Good linearity and low offset of the ADC
is mandatory. Channel AN1 measures the differential DC link voltage.
Fast sampling in the range of 2s or less per channel guarantees fast
leakage current detection for IGBT control. AN3 measures the motors
temperature. The level input of the window comparators are connected
to an 8-bit DAC for control purpose.
DC Link
Voltage
R
S
T
IGBTs
Current Sensor IU
Current Sensor IV
Current Sensor IW
Park
Speed
Est
32
i35
iAS
iBS
qAS Flux
iAS Est
iBS
i05
iAS
V06
iBS ADC
Meas
Driver
VDC
AC Motor
ADC
adCIN3
Voltage
Source
Inverter
I1
I2
VBUS
UC
OPA364
AN1
VC
WC
Sign and
Over-Current
Comparators
OPA364
On-Chip Software
TA
TB
TC
Vector control functional block diagram.
IV
3 ADCs
7 S&H
12 Channels
IW
A1/B1
OPA364
22
AN2
Positioning
Sensor1
at Motor
Counters
Flexible
Interface
A2/B2
OPA364
AX/BX
OPA364
22
On-Chip
Hardware
Phase
Voltage
Calc
IU
8-Bit DAC
2.5V
Reference
iBS
V35
adCIN1
i35
Clarke
QEP
Circuit
MUX
Analog
Input
EV
PWM6
T2PWM_T2CMP
GP Timer 2
PWM1
TA
PI
iDS
PWM1
PWM2
PWM3
PWM4
PWM5
PWM6
OPA364
iQS
iDS
Inv
Park VDS
T1PWM_T1CMP
Compare Unit 1
PI
Space TB PWM
Vector
Driver
Gen TC
TCLKINA/TDIRA
ADC Start
GP Timer 1
OPA354
PI
VAS
VQS
GP Timer 1 Compare
DC Link Voltage Sensor
For asynchronous motors, speed regulation is a typical concern. Three

phase inverters with a 6 PWM scheme are widely used for variablespeed drive applications. Depending on the application, a simple V/Hz
open-loop (scalar) control where no feedback is required can be
applied, or a vector control in which current, voltage and speed
information is needed.
2
EV Control Registers/Logic
Data Bus
Todays motor control applications challenge electronic circuitry to

achieve the highest efficiency, lowest power consumption and highest
precision control. There are several motor types in which digital and
analog solutions are increasing performance in motor control applications.
Synchronous motors are also described as BLDC (Brushless DC) or
PMSM (Permanent Magnet Synchronous Motors). The only difference
between them is the shape of the induced voltage, resulting from two
different manners of wiring the stator coils. The back-emf is
trapezoidal in the BLDC motor, and sinusoidal in the PMSM motor.
Digital techniques addressed by the C2000TM DSP controller make it
possible to choose the correct control technique for each motor type.
Processing power can extract the best performance from the machine
and reduce system costs. Options include using sensorless techniques
to reduce sensor cost, or even eliminate it; additionally, complex
algorithms can help simplify the mechanical drive train design, also
lowering system cost.
PIE
OPA364
AN3
ADS7869
Load with
Positioning
Sensor2
ACI
Servo motor control functional block diagram.
20
Motor Control
Current Shunt Modulator
Controller Generation, Fixed Point
ADS1203
TMS320C28xTM
Get samples, datasheets and EVMs at: www.ti.com/sc/device/ADS1203
Get samples, datasheets, tools and app reports at: www.ti.com/c2000
The ADS1203 is a delta-sigma modulator with 95dB dynamic range,

operating from a single +5V supply. The differential inputs are ideal for
direct connection to transducers or low-level signals. It is available in
an 8-lead TSSOP or 16-pin QFN (3x3) package.
The C28xTM controllers are the industrys first 32-bit control-based

DSPs with onboard reprogrammable Flash, factory programmed ROM,
or cost effective RAM-only memory options and performance from 100
to 150 MIPS.
Key Features
Resolution: 16-bits
Input range: 250mV
Linearity: 1LSB (typ)
Internal 2.5V reference
Specifications
32-bit, fixed-point C28x DSP core
Up to 150-MIPS operation
1.8/1.9V core and 3.3V peripherals
Easy-to-use software and development tools speed time-to-market
Family Members
INA139: high-side current-shunt monitor (diff. amplifier),
up to 36V common-mode input
INA169: high-side current-shunt monitor (diff. amplifier),
up to 60V common-mode input
Applications
Digital motor control
Digital power supply
Advanced sensing in industrial, automotive, medical
and consumer markets
Code Security
U p to
U p to
8
40
256 KBytes
KBytes
B
ot
Sectored KBytes
RAM
Flash/ ROM RAM
VIN+
VIN
MDAT
2nd- Order
Modulator
Event
M anager B
M emory Bus
12-Bit ADC
W atchdog
Interrupt M anagement
MCLK
100-150MI PS C28xTM 32-Bit DSP

RC Oscillator
20MHz
VDD
32x32-Bit
M ultiplier
Interface
Circuit
M0
M1
GND
Buffer
Reference
Voltage
2.5V
32-Bit
Timers (3)
Real-Time
JTAG
R-M -W
Atomi c
ALU
Peripheral Bus
XINT F*
Event
M anager A
GPIO
M cBSP
CAN 2.0B
SCI-A
32-Bit
Register
File
SCI-B
SPI
* Available on x2812 controller only.

TMS320F2812 controller block diagram.
Motor Control
21

2+2 Channel Simultaneous Sampling, 16-Bit ADC
Complete Analog Front End
ADS8361
ADS7869
The ADS8361 is a 16-bit, 500kSPS ADC with four fully differential

input channels grouped into two pairs for high-speed, simultaneous
signal acquisition. The device offers a high-speed, dual serial interface
and is available in an SSOP-24 package and specified over the 40C
to +85C operating range.
The ADS7869 is the next-generation successor of the well-known

VECANA01 analog front end and includes three ADCs with a total of
seven S/H capacitors and 12 fully differential input channels. There are
four sign comparators connected to four input channels. The device
offers a very flexible digital interface, featuring three different modes,
starting from serial SPI, adjustable parallel up to the VECANA01compatible mode. For position sensor analysis, two up-down counters
are added on the silicon. This feature ensures that the analog input of
the encoder is held at the same point of time as the counter value.
Key Features
Four fully differential input channels
2s throughput per channel
INL: 3LSB (typ)
Power consumption: 150mW
Internal 2.5V reference
Supply voltage: 2.7V to 5.5V
Pin-compatible upgrade to ADS7861
(12- to 16-bit)
Key Features
Resolution: 12-bits
Sampling rate: 1MSPS
INL: 1LSB (typ)
Family Member
12-bit, 2x2 channel, serial interface: ADS7861
12-bit, 2x2 channel, parallel interface: ADS7862
16-bit, 2x2 channel, serial interface: ADS8361
Two up-down counter modules on-chip

Power consumption: 250mW
Packaging: TQFP-100
IUp
IUn
Offset
A1p
A1n
A2p
A2n
Gain
SH1
Axp
Axn
SH6
IVp
IVn
Offset
Gain
SH3
ADC2
12-Bit
SH7
Gain
SERIAL
DATA A
SERIAL
DATA B
M0
M1
Serial
Interface
A0
IWp
IWn
AN1p
AN1n
AN2p
AN2n
AN3p
AN3n
CDAC
CH B1+
CH B1
ADC3
12-Bit
DAV
Conv
REFOUT
REFIN
Internal
2.5V
Reference
Ref
HOLD1
HOLD2
Conv
Up/Down Counter 1
16-Bit
Up/Down Counter 2
16-Bit
BUSY
CONVST
RST
Control
Logic
DAC6
12-Bit
MUX3
RD
COMP
DAC5
12-Bit
INT
SH5
CLOCK
CS
CLK
Conv
Offset
REFIN
SHA
DAC4
12-Bit
DATA<0.15>
COMP
CDAC
CH B0+
CH B0
DAC3
12-Bit
MUX2
Bxp
Bxn
CH A1+
CH A1
REFOUT
Input
Select
MUX5
SAR
Internal
2.5V
Reference
ADDR<0.5>
Conv
SH4
SHA
FIFO
ADC1
12-Bit
MUX4
B1p
B1n
CH A0+
CH A0
RAM
DAC2
12-Bit
MUX1
SH2
B2p
B2n
DAC1
12-Bit
DAOUT
DAC7
8-Bit
CS
RD
WR
M1
M0
CNTA2
CNTB2
CNTA1
CNTB1
SAR
UCp
UCn
UCOMP
WCOMP
UILIM
VILIM
WILIM
DAIN
22
Motor Control
1.8V, 7MHz, 90dB CMRR Rail-to-Rail I/O Op Amps

OPA363, OPA364
Get samples, datasheets and EVMs at: www.ti.com/sc/device/OPA363 and
www.ti.com/sc/device/OPA364
The OPA363 and OPA364 families are high-performance CMOS op amps

optimized for very low voltage, single-supply operation. Designed to operate
on single supplies from 1.8V (0.9V) to 5.5V (2.25V), these amps are ideal
for sensor amplification and signal conditioning in battery-powered
systems. They are optimized for driving medium speed A/D converters
(up to 100kHz) and offer excellent CMRR without the crossover associated
with traditional complementary input stages. The input common mode range
includes both the negative and positive supplies and the output voltage
swing is within 10mV of the rails. All versions are specified for operation
from 40C to +125C.
V+ = 1.8V
V+ = 1.8V
100
OPA363
OPA364
VIN
ADS8324
1nF
OPA363 functional block diagram.
Key Features
Slew rate: 5V/s
Low offset: 500V (max)
Quiescent current: 750A/channel (max)
Available in single, dual and quad
Packaging: SOT23-5, SO-8, MSOP-8, TSSOP-14, SO-14
Applications
Signal conditioning
Data acquisition
Process control
Test equipment
Active filters
Device
Description
Key Features
Benefits
Other TI Solutions
OPA335
Zero-Drift Op Amp
0.05V/C Drift, 5V Offset, RRIO at 3.3VDC, Single Supply
INA326
30nV/ Hz Noise, RRIO, Single Supply
TMP121
High-Precision
Instrumentation Amp
Digital Temp Sensor
OPA227
Low Noise Amp
Best Long-Term Stability for Industrial Use, No Need for

Dual Supply, Best in Class, Automotive Temp Range
Lowest Noise in the Industry and Best Long-Term
Stability, No Need for Dual Supply
Temperature Range, Ultra Small Package
Very Low Noise, Small Package
OPA735, 12V Version with

Improved Noise and Drift
Range, 40C to +125C
TMP175
(SMB-Bus Interface)
OPA350, OPA725
Optimized for PROFIBUS, Up to 160 Users Per Bus,

Up to 40Mbps
SN65HVD485E,
Low-Cost Version
SNHVD233
(3.3V Version)
Drift = 20ppm/C, 4.097V, 0.2%

Adjustable Output (0.9V to 3.3V), 1.5A

Low Noise, Small Board Area
REF02, REF102
DCP010505
TPS64200
V/F Converter
16-Bit, 5s Settling Time
0-5V Input, 1-4MHz Output

Output = 10V, INL = 0.0015%
Low Cost Direct DC-Link Current Measurement

Small Package
INA19x, INA138
DAC7741
Free Design Software
Design Low Pass Filters, Quick, Easy
Free, www.ti.com/filterpro
Amplifiers
Integrated Diode Temp Sensor, ADC and SPI Interface

to Convert Valve Temp into Digital Code or the DSP
VN = 3nV, CMRR > 120dB, VS = 5 to 36V
Interface

REF3140
DCV010505D
TPS54110
Voltage Reference
Dual Converter
SWIFTTM Buck Converter
Data Converters
ADS1206
DAC7731
Other
FilterProTM
Motor Control
23
TMS320C28x Controller Generation
Device
Boot
MIPS ROM
RAM
12-Bit
#
#
A/D Chs/
Core
Flash/
CAP/ PWM Hi-Res Conversion
WD
Comm Ports
I/O Voltage
ROM Timers QEP Channels PWM Time (ns) EMIF Timer Other SPI SCI CAN Pins (V) Packaging ($U.S.)+
Flash Devices
TMS320F2801-PZA/S/Q
TMS320F2801-GGMA/S/Q
TMS320F2806-PZA/S/Q
TMS320F2808-PZA/S/Q
TMS320F2810-PBKA/S/Q
TMS320F2812-GHHA/S/Q
TMS320F2812-PGFA/S/Q
100
100
100
100
100
100
150
150
150
150
8KB
8KB
8KB
8KB
8KB
8KB
8KB
8KB
8KB
8KB
12KB
12KB
20KB
20KB
36KB
36KB
36KB
36KB
36KB
36KB
32KB
32KB
64KB
64KB
128KB
128KB
128KB
256KB
256KB
256KB
9
9
15
15
15
15
7
7
7
7
2/1
2/1
4/2
4/2
4/2
4/2
6/2
6/2
6/2
6/2
6+2
6+2
12 + 4
12 + 4
12 + 4
12 + 4
16
16
16
16
3
3
4
4
4
4
16Ch/160
16Ch/160
16Ch/160
16Ch/160
16Ch/160
16Ch/160
16Ch/80
16Ch/80
16Ch/80
16Ch/80
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
I2C
I2C
I2C
I2C
I2C
I2C
McBSP
McBSP
McBSP
McBSP
2
2
4
4
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
1
1
1
1
2
2
1
1
1
1
32
32
32
32
32
32
56
56
56
56
1.8
1.8
1.8
1.8
1.8
1.8
1.9
1.9
1.9
1.9
100-LQFP
100-BGA
100-LQFP
100-BGA
100-LQFP
100-BGA
128-LQFP
128-LQFP
179-BGA
176-LQFP
$5.79
$5.79
$8.69
$8.69
$11.52
$11.52
$13.81
$14.73
$15.65
$15.65
150
150
150
8KB
8KB
8KB
40KB
40KB
40KB
7
7
7
6/2
6/2
6/2
16
16
16
16Ch/80
16Ch/80
16Ch/80
Y
Y
Y
Y
Y
McBSP 1
McBSP 1
McBSP 1
2
2
2
1
1
1
56
56
56
1.9
1.9
1.9
128-LQFP
179-BGA
176-LQFP
$ 9.11
$10.63
$10.63
150
150
150
150
8KB
8KB
8KB
8KB
36KB
36KB
36KB
36KB
128KB
256KB
256KB
256KB
7
7
7
7
6/2
6/2
6/2
6/2
16
16
16
16
16Ch/80
16Ch/80
16Ch/80
16Ch/80
Y
Y
Y
Y
Y
Y
McBSP
McBSP
McBSP
McBSP
2
2
2
2
1
1
1
1
56
56
56
56
1.9
1.9
1.9
1.9
128-LQFP
128-LQFP
179-BGA
176-LQFP
$7.05
$8.22
$9.59
$9.59
RAM-Only Devices
TMS320R2811-PBKA/Q
TMS320R2812-GHHA/Q
TMS320R2812-PGFA/Q
ROM Devices
TMS320C2810-PBKA/Q
TMS320C2811-PBKA/Q
TMS320C2812-GHHA/Q
TMS320C2812-PGFA/Q
1
1
1
1
Prices are quoted in U.S. dollars and represent year 2006 suggested resale pricing. All prices are subject to change. Customers are advised to obtain the most current and complete pricing
information from TI prior to placing orders. TI may verify final pricing prior to accepting any order.
Minimum volumes for C281x devices are 10 KU with NRE of $11,000.
A = 40 to 85C; S = 40 to 125C (10% adder over A); Q = 40 to 125C, Q100 qualified (15% adder over S)
All devices are available in PB-Free Green packaging.
24
Security
Surveillance Cameras, Glass Breakage and Smoke Detectors
Surveillance IP Video Node Basics

the-art, Class-D audio amplifier. TI's video surveillance solutions are
primarily based on the high-performance TMS320DM64x digital media
processors, which have on-chip video ports for easy connection to
video devices. The DM64x devices are capable of handling both video
and audio encode/decode for IP-based video surveillance applications.
Cost-competitive video compression/decompression algorithms are
available from TI or through our partner network for JPEG, MPEG2,
MPEG4, H.264, and more. Audio compression/decompression
algorithms are also available.
Digital video surveillance systems include embedded image capture

capabilities which allow video images or extracted information to be
compressed, stored or transmitted over communication networks or
digital data links. The TVP51xx video decoder family offers a
high-performance, low-cost analog video interface supporting
PAL/NTSC/SECAM video systems. Fast lock times and superior analog
processing capabilities make them an ideal fit for any kind of
streaming video applications. A typical audio subsystem consists of an
audio codec and an audio amplifier. The TPA3007D1, based on the
patented filter-free modulation scheme, is a high-efficiency, state-of-
Video Processor
DMX64x
Video
Decoder
Video
TVP5150A
Decoder
TVP5154
Interface
Logic
Video Port
SDRAM
EMIF
Flash
I2C
Video
Decoder
Video
TVP5150A
Decoder
TVP5154
Voice
CODEC
TLV320AIC13
TLV320AIC21
TLV320AIC26
TLV320AIC28
Microphone
AC Line
Earphone
Storage
Device
Host
Computer
PCI
IP Network
Video Port
PoE
Power Source
Equipment
48 VDC
LEGEND
Power
McBSP
EMAC
Ethernet PHY
Transceiver
RJ-45
Amplifier
Data Converter
AC Adapter
Logic
Power Factor Corrector

PWM
Controller
PoE
IEEE 802.3af
Power Solution
MOSFET
Driver
Processor
Other
12-14 VDC
Power Management
+1.1V-1.8V/3.3V
Processor Core
+3.3V/+5V
Analog/Digital
Dual
Output
LDO
DC-DC
Buck
Controller
+5V/1A
LDO
Power
Mux
Supply
Voltage
Supervisor
Battery
Backup
Charger
IP Video Node block diagram.
Security
25
High-Performance Digital Signal Processors
High-Performance Digital Signal Processors
TMS320DM64x
TMS320C6414T, TMS320C6415T

www.ti.com/sc/device/TMS320DM642

www.ti.com/sc/device/TMS320C6414T,
www.ti.com/sc/device/TMS320C6415T
TIs video surveillance solutions are primarily based on the highperformance DM64x DSP-based digital media processors. The DM64x
digital media processors have on-chip video ports for easy connection
to video devices and are capable of handling both video and audio
encode/decode for IP-based video surveillance applications. The single
programmable digital media processor is a cost-effective solution,
because the need for external PCI or EMAC is eliminated.
Key Features
Performance up to 5760MIPS performance at 720MHz
Multiple input/output glueless interfaces for common video and
audio formats
Performance real-time video encoding, decoding, or transcoding
Three dual-channel video ports support simultaneous video input
and output
Advanced connectivity with 10/100 Ethernet MAC and 66MHz PCI
Ready-to-use application software such as MPEG-4, MPEG-2,
MPEG-1, WMV9, H.26L, H.263, H.261, M-JPEG, JPEG2000, JPEG,
H.264 and more.
Applications
Network camera-based surveillance and IP video nodes
Video-on-demand set-top boxes, personal video recorders and
digital media centers
Statistical multiplexer and broadcast encoders
IP-based video conferencing and IP-based videophones
TMS320C64x DSPs offer the highest level of performance to meet

the demands of the digital age. At clock rates up to 1GHz, the C64x
DSPs can process information at a rate of more than 8000MIPS. TIs
C64x DSPs are backed by an extensive selection of optimized
algorithms and industry-leading development tools.
Key Features
Highest in-class performance with production-class devices
available up to 1GHz
TMS320C64x DSPs are 100% code-compatible with
TMS320C6000 DSPs
C64x DSPs offer up to 8000MIPS with costs as low as $20.00
Advanced C Compiler and Assembly optimize efficiency and
performance
Packaging: 23/27mm BGA options
Applications
Statistical multiplexers
Broadcast encoders
Video conferencing
Video surveillance
C64xTM DSP
L1P Cache Direct -M apped
16K Bytes Total
EMI F-A
EMI F-B
C64x DSP Core
Timer 2
TMS320DM642 Digital Media Processor
Timer 1
EMIF64
L1P Cache 16 KBytes
VCXO Interpolated
Control (VVIC)
Data Path 1
A Register File
L1 S1 M1 D1
Control
Registers
In-Circuit
Emulation
Data Path 2
B Register File
OR
M cBSP1
M cBSP0
GPIO[8:0]
D2 M2 S2 L2
GPIO[15:9]
Control
Registers
Instruction Fetch
Control
Logic
Instruction Dispatch
Advanced Instruction
Packet
L2 M emory 1024K Bytes
10-Bit VP1
and
or
McBSP1
or 2 10-Bit VP1
or McASP
20-Bit Video
Port 1 (VP1)
Instruction Decode
UTOPIA
Interrupt Control
or 2 10-Bit VP0
L2 Cache/Memory 256 KBytes
Instruction Dispatch
Enhanced DMA Controller
Instruction Fetch
HPI16 and EMAC/MDIO
10-Bit VP0
and
McBSP0
or McASP
M cBSP2
C64xTM DSP Core
PCI-66 or HPI32
or
20-Bit Video
Port 0 (VP0) or
Timer 0
PLL
Enhanced DM A Controller (64-Channel)
Power Down
Instruction Decode
Advanced
In-Circuit
Emulation
Test
Interrupt
Control
Data Path A
A Register File
L1 S1 M 1 D1
Data Path B
B Register File
D2 M 2 S2 L2
HPI
L1D Cache 16 KBytes

Timer 0
20-Bit Video
Port 2 (VP2)
Timer 1
or 2 10-Bit VP2
Timer 2
GPIO16
OR
L1D Cache 2-Way Set -Associative

16K Bytes Total
PCI
Interrupt
Selector
PLL
(x1, x6, x12)
Power-Down
Logic
Boot
Configuration
IIC0
TMS320DM642 digital media processor block diagram.
TMS320C6415T DSP block diagram.
26
Security
Device
Description
Key Features
Benefits
Op Amp
Class-D Audio Power
Amp
Ideal for Audio Amplification, Low Power Consumption

6.5W into an 8 Load from 12V Supply, 3rd Generation Modulation
Technique, Short Circuit Protected
Cost-Effective Solution with Low Noise and Small SOT-23 Package

Replaces Large LC Filter with Small Ferrite Bead Filter, No Heatsink
Required, Improved Efficiency, Improved SNR
Quad, 30MSPS, 10-Bit ADC, Supports Component YPrPb/RGB,

Programmable Video Output Format, Certified Macrovision Copy Protection
Detection, Built-In Video Processing, VBI Data Processor, I2C Interface
Single 8-Bit ADC, Composite and S-Video Support, Built-In Video
Processing, I2C Interface
Programmable Sampling Rate Up to: Max 26kSPS w/On-Chip IIR/FIR Filter,
Max 104kSPS w/IIR/FIR Bypassed, Built-In Amps for Microphones/Speakers
10 Video Inputs, SCART Support, Includes a 5-line Adaptive Comb Filter

for Best-in-Class Y/C Separation, 4 10-Bit, 30MSPS ADCs for Superior
Noise Performance
2 Video Inputs, 4-line Adaptive Comb Filter, Fast Lock Times, Extremely
Low Power, Low Cost
Directly Connect to McBSP without Logic, Interface with Multiple Analog
I/Os DSP Software, Analog/Digital PGA to Increase Performance
Ability to Perform Video/Audio Encode on Multiple Channels, Direct I/F

to NTSC/PAL Decoder Through Video Ports/Audio Through McBSP
Cost Effective with Single Programmable DSP, No Need for External PCI or
EMAC, Eliminates the Need for External FPGA
Internal PD Detection Signature Output, Internal PD Classification Output,

Programmable Inrush Current Limit, 0.3 Low-Side FET Input, Internal
Thermal Protection and UVLO Compliant to the PoE IEEE 802.3af Standard
Programmable Soft Start with Active Low Shutdown
Individually Manage Power for Up to 8 Ethernet Ports, All Operations of

the TPS2383A are Controlled Through Register Read and Write Operations
Over a Standard (Slave) I2C Serial Interface
Anti-Cross Conduction Circuitry, Allows the Output to Sink Current by
Allowing the Synchronous Rectifier to Turn on w/o the Switch Node Collapsing
Low-Input Voltages (1.8V to 10V), Draws >12A, Allowing Accurate Sensing
of the External 24.9-k Discovery Resistor
Designed to Have a Fast Transient Response and be Stable with 10F
Low ESR Cap at Low Cost
Complete Power Management Solution Designed for TMS320TM DSP
Family, Easy Programmability, Differentiated Features: Accuracy, Fast,
Transient Response, SVS Supervisory, Reset and Enable Pins
On-Chip Sync Rectifier Drives Less Expensive N-Ch MOSFET, Allows
Smaller Input Cap to Reduce Cost, Resistor-Less Current Protection
Reduces External Part Count
Amplifiers
TLV246x
TPA3007D1
Data Converters
TVP5146
TVP5150A
TLV320AIC12
NTSC/PAL/SECAM
4 x10-Bit Digital Video
Decoder w/Macrovision
8-Bit Video Decoder
(PAL, NTSC, SECAM)
Dual-Channel
Voice Codec
Processor
TMS320DM642 Video Processor

TPS2383
UCC1809/
2809/3809
TPS2370
TPS76850
TPS70148
TPS5130
Power Sourcing
Equipment Power
Managers (PSEPM)
Current Mode
PWM Controller
Power Interface Switch
All Detection, Classification, Inrush Current Limiting and Switch FET

Control Necessary for Compliance with IEEE 802.3af Standard
Fast-Transient-Response Low Drop-Out = 230mV at 1A, 2% Tolerance, Open Drain Power Good,
1A LDO
Thermal Shutdown Protection
Dual-Output LDO
1.2V/1.5V/1.8V/2.5V/3.3V Options for Dual-Output Voltages, Selectable
for DSP Systems
Power-Up Sequence for DSP Applications, Power-On Reset with
Delay, Power Good, Two Manual Reset, Thermal Shutdown
Triple Sync Buck
3 Independent Step-Down DC/DCs and 1 LDO, 1.1V-28V Input Range,
Controller with LDO
0.9V to 5.5V Output Range, Sync for High Efficiency, Auto PWM/SKIP
Overvoltage/Current Protection, Short-Circuit Protection
Security
27
Smoke Detector
Smoke detection is a critical application, not only because life can
depend on the reliability of the sensor, but also because false alarms
can be quite costly. There are several ways to detect smoke, but optical
detection is the most common. In order to achieve high reliability, a highly
integrated solution is desirable. Due to laws that require a detector in
every room (e.g. in hotels) cost is also a decisive factor.
In order to achieve low maintenance costs, batteries
must have several years of life which require a
pulsed application with fast wake-up time, fast
processing time and exceptionally low stand-by
current. This makes the ultra-low-power MSP430
microcontroller an ideal choice for this application.
The figure at right, shows the heart of a smoke
detector. A pulsed IR-transmitter and IR-receiver
are located in a non-reflective measurement
chamber which has to be protected against
outside light, only light from the IR-transmitter,
which is reflected by the smoke, can reach the
IR-receiver. Two subsequent measurements are
performed. The first measures the surrounding
light when the IR-transmitter is switched off;
the second measures reflected light when the
IR-transmitter is switched on. This differential
measurement method requires not only a high
dynamic range linearity sensor and circuitry, but
also a high linearity of the system.
Smoke detector block diagram.
Device Type
Microcontroller
Operational Amplifiers
Recommended Device
MSP430F1111A
OPAx340
OPAx336
OPAx381
TLV247x
TLV276x
TLV224x
OPAx379
Device Characteristics
1.8V to 3.6V Lowest-Power controller with Analog Comparator for Dual Slope A/D Conversion
Fast RRIO Transimpedance Amplifier with Trimmed Offset Voltage
Low-Offset, Low-Drift, RRO Amplifier with Only 32A Quiescent Current
Fast, Zero-Drift Transimpedance Amplifier with <1mA Quiescent Current
Fast, Lowest-Drift 0.4V/C, General-Purpose Amplifier with Shutdown
Medium Speed, 1.8V RRIO Amplifier with Shutdown and Fast Turn On/Off Time
1A, 5kHz, RRIO Nanopower Operational Amplifier
1.8V, 2A, 100kHz, RRIO Nanopower Operational Amplifier
New devices appear in bold red.
28
Security
Glass Breakage Detector

The typical acoustic glass breakage sensor works by using a microphone to measure the sound spectrum of pressure differences in the
glass. The first signal wave represents the vibration caused by an
object hitting the glass. This frequency is in the 200kHz range. The
second signal, in the 5kHz frequency range, occurs when the glass
breaks. The figure below shows an implementation using a low

dropout regulator, an amplifier and the MSP430 microcontroller with
an onboard ADC. A fast rail-to-rail amplifier is needed to boost the
transducer signal to the ADC input voltage range. All following stages
are integrated into the MSP430 signal controller.
Glass breakage detector block diagram.
Device Type
Microcontroller
Voltage Regulator
Data Converter
Recommended Device
MSP430F1132
TLV278x
OPAx363
OPA336
OPA348
OPA381
TPS77001
ADS7866
1.8V to 3.6V VCC, industrys lowest-power controller with integrated 10-bit, 200kSPS ADC
Fast 8MHz GBW, 4.3V/s SR, 1.8V, RRIO operational amplifier with shutdown
Fast 7MHz GBW, 6V/s SR, 1.8V, RRIO amplifier with excellent input linearity and shutdown
2.3V to 5.5V single supply, RRO within 3mV, 20A/amp IQ, 125V (max) offset, 1pA bias current
1MHz BW, 2.1V to 5.5V single supply, RRIO, 45A (typ) IQ, 0.5pA bias current
18MHz GBW, extremely high precision, excellent long-term stability, low 1/f noise, 5 decades dynamic range, 800A IQ
Adjustable, 50mA output current voltage regulator with low dropout and low quiescent current
Lower power family at 8-, 10-, 12-bit >200kSPS, 1.2V to 3.6V ADC
29
Electronic E-Meter
Electromechanical meters have been the standard for metering
electricity since billing began. Todays electric companies are
demanding more information from meters in the residential sector,
where metering has typically been limited to kilowatt hours. New
features such as multi-tariff billing, reactive energy measurement
and power quality monitoring are desirable to improve generation,
distribution, customer service and billing. In order to accommodate
the advanced requirements not available in electromechanical meters,
manufacturers have begun adopting all-electronic solutions. New
energy measurement integrated circuits from TI enable accurate,
dependable and robust meters with key features demanded by utility
companies. TI offers the first single-chip IC for electronic meters along
with analog products needed to complete a state-of-the-art e-meter
design while saving the manufacturer valuable design time and cost
of development.
Electronic E-Meter
Industrys First Single-Chip IC for Electronic Energy Meters
Single-chip solution for electronic e-meter application
Single supplier solution
Analog Front End (AFE) with coprocessor integrated in the
ESP430CE1 module.
Ultra-low-power MSP430FE42x for extremely long life cycles
Main CPU can run mainly for communication like ripple control,
tariff switching or sleep
Provides shunts, current transformers (CT) and di/dt sensors like
Rogowski coils
Calculated Results (Cont.)

Status
Waveform samples
Power factor
DC removal
Mains period
RMS, peak values (current/voltage)
Temperature
Line cycle counter
Automatic voltage drop detection level select by software
Tamper detection for single-phase, 2-wire metering
Next-Generation Electronic E-Meter
The MSP430FE42x is designed to meet the requirements of nextgeneration electronic e-meters including the ability to meet different
international standards such as IEC62053-21/22/23 (Europe) and ANSI
C12.XX (U.S.) High integration provides for an easy-to-use solution
with the smallest size and lowest cost.
-45dB
REF32xx
Precision
V-Reference
5V
123.456 kWh
3.3V
LCD
VL1
SN65
HVD
3082
IL1
RS-485
to
modem
MSP430FE427
V+
3.3V
32kHz
Calculated Results
Active, reactive, apparent power
Software programmable metering start current
3V-Li coin
TMP75
Xtal
GRD
Temperature
Compensation
For Xtal
Device
Description
Key Features
Benefits
Other TI Solutions
Single-Chip IC for Electronic E-meter
Easily Integrated Solution in a Small Package and Lowest Cost MSP430FE423/FE25
Microcontroller
MSP430F427
Ultra-Low-Power, 16-Bit RISC CPU
Interface
SN65HVD3082E 5V, Half-Duplex RS-485 Transceiver
SN65LBC184
5V, Half-Duplex RS-485 Transceiver
Ideal for Metering Applications,

Cost-Effective Solution with Low-Power and Slew Rate Control SN65HVD3085E
Low Power Consumption and Slew Rate Control
Ideal for Metering Applications, Integrated
Integrated Transient Voltage Protection for Highest Reliability SN65LBC182
Transient Voltage Protection and Slew Rate Control
Data Converter
ADS8364
6Ch, 16-Bit, 250kHz SAR
High-Speed Simultaneous Sampling ADC for
Fastest Control Loop to Secure Circuit Breaker Shut Off
ADS1204
4ppm/C, 100A, SOT23-6,

Series Voltage Reference
Very Low Drift, High Output Current 10mA, High

Accuracy 0.01%, Low Quiescent Current 100A
Small Package, Excellent Performance, Competitive Price
REF31xx, REF30xx,
REF29xx, REF02,
Rail-to-Rail, 1.8V, High CMRR, GBW 7MHz
Low Noise , No Crossover Distortion at Low Power Ideal for Driving High-Speed and Precision 16-Bit ADCs
OPA2822, OPA350
9 to 12-Bit User Selectable, 1.5C (max) from 25C Low Power, Small Package, High Resolution, Good Accuracy
to +85C, Low Quiescent Current 50A
TMP175, TMP100
Voltage Reference
REF32xx
Amplifier
OPA363
Digital Temperature Sensor

TMP75
Digital Temp Sensor with

Two-Wire Interface
30
Scientific Instrumentation
Scientific Instrumentation
In todays industrial scientific instrumentation applications, such as
gas/liquid chromatography, mass spectrometry and vibration analysis,
the analog signal requires processing with maximum resolution at the
highest speed while achieving optimum signal-to-noise ratio, lowest
ripple and THD. For automatic test equipment (ATE), an excellent DNL
and INL are also expected.
In gas chromatography applications, an ADC converts the signal and
separates the desired frequency product from the mixture. Combining
high resolution (16- to 18-bit range) with the highest speed (MHz
range) while achieving high SNR is the major challenge.
The ADS160x family of 16-bit, high-speed, delta-sigma ADCs was
developed for applications based on Adaptively Randomized Data
Weighted Averaging (DWA) Algorithm architecture and works up to
10MHz (10MHz in 2x mode) bandwidth while achieving SFDR above
100dB.
ADS8381
X
Servo
M otor
DSP
C
18-Bit ADC,
W ide
Dynamic
Range
24-/ 32-bit
Laser
Analog or
Digital
Boost Stage
OPA549
LASER
e.g. Signature
on a Label
DAC7731
16-bit feedback DAC
with 10V output
Servo
M otor
ADS8381
DSP
C
up to 15A peak current

(Audio platform specs)
Audio Pow er Amplifier

to drive the Servo M otor
(Impedance like a speaker)
Analog or
Digital
Boost Stage
(Audio)
OPA549
DACxxxx
DWF1-364838 laser mirror positioning application, test and working principle:

1 mirror for 1 direction.
In applications such as mirror positioning for precision laser beam

control, a very fast, high-resolution control loop is needed to achieve
maximum accuracy and throughput. The ADC needs to have the lowest
latency at maximum resolution to position the laser. The application
below shows the ADS8381 (18-bit, 500kHz)one of the fastest SAR
ADCs availablewith 112dB SFDR and 18-bits NMC.
SPECTRAL RESPONSE
0
fIN = 4.0MHz, 6dBFS

SNR = 86dBFS
SFDR = 105dB
20
Amplitude (dB)
40
60
80
100
120
140
160
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Frequency (MHz)
ADS1610 spectral response.
Recommended high-speed ADC driver circuit using OPA2822.
31
High-Speed Signal Analysis
High-Speed Signal Analysis
ADCs in Video and Imaging
High-speed test and measurement applications are characterized

by the need for high SNR, high sampling rate and other high-speed
characteristics as determined by the system designer. Input signals
may be large bandwidth and thus the input bandwidth of the ADC
becomes critical. At the same time, to support input frequencies
higher than 1/2 the ADCs sampling rate, undersampling is often
applied, requiring the converter to perform well (SNR/SFDR) at
these high input frequencies. Peripheral functions also have a
dramatic impact on signal-chain performance. The amplifier driving
the ADC has a direct impact on SNR/SFDR, thus it must be chosen
carefully to maintain specified system performance. Additionally,
ADC performance is critically impacted by clock jitter; thus, a lowjitter clock source can provide an ideal solution.
The ADS5500s 14-bit resolution provides higher SNR to process highquality images accurately, and simplifies the analog input circuitry by
reducing the need for programmable gain amplifiers. Also, its high
sample rate allows designers to scan images faster or oversample the
input signal, which simplifies analog filter design and lowers system
cost. The ADS5500s low power dissipation extends battery life in
portable systems and provides cost savings due to the lower power
supply and system thermal management requirements.
TMS320DM64x DSP
CCD/CMOS
Sensor
CDC
Analog
Filter
Amp
Correlated
Double
Sampling
Input
Conditioning
Clock
Source
AMP
ADS5500
GC5016
DSP
ADS5500
Digital
Processing
OPA847, OPA695
THS4304
ADS5500 in video and imaging applications.
TMS320C64xTM
TMS320C55xTM
OPA847
OPA695
THS4503
CDC
CDCM7005 CDCV304
CPCP1803 CDCVF2310
ADS5500 in test and measurement applications.
High-Performance ADCs
Device
ADS5444
ADS5440
ADS5500
ADS5424
ADS5541
ADS5423
ADS5520
ADS5521
Resolution (Bits)
13
13
14
14
14
14
12
12
Speed (MSPS)
250
210
125
105
105
80
125
105
SNR (dBc)
68 at 230MHz IF
68 at 230MHz IF
69.5 at 100MHz IF
74 at 50MHz IF
71 at 100MHz IF
74 at 50MHz IF
68.7 at 100MHz IF
69 at 100MHz IF
SFDR (dB)
75 at 230MHz IF
79 at 230MHz IF
82 at 100MHz IF
93 at 50MHZ IF
86 at 100MHz IF
94 at 50MHz IF
82 at 100MHz IF
86 at 100MHz IF
Additional Products
TI Solution
High-Speed Amplifier
Digital-to-Analog Converter
Digital Up/Down Converter
Clock Distribution Circuit
Digital Signal Processors
Device
OPA695
THS9000/THS9001
DAC5686/DAC5687
GC5016
CDCM7005/CDC7005
TMS320C64xTM, TMS320C55xTM
Digital Signal Processor

TMS320C67xTM
THS4509
Ultra-Wideband (1.4GHz), Current-Feedback, 2500V/s Slew Rate (G=+2)
50 to 350MHz Cascadeable Op Amp Optimized for High IF Frequencies
Dual-Channel, 16-Bit, 500MSPS with Selectable 2x to 16x Interpolation Comms DAC
Wideband, Quad, Channels Independently Configurable, Low Power
Low-Phase Noise, Low-Skew Clock Synthesizer and Jitter Cleaner, 3.3V Supply
16-Bit, Fixed-Point DSPs, Up to 1GHz Clock Rates and 8-Giga MACs of Performance,
With the Industrys Best Power-Consumption Benchmarks
32-Bit DSPs With Up to 1G FLOPS of Floating-Point Processing Performance
Ultra-Low Noise, Wideband Amplifier
32
RF Applications
Industrial applications have had to wait many years for the availability
of effective wireless solutions to overcome shop floor communications
obstacles such as expensive cables and wiring costs. To date, efforts
to simplify industrial interface has met with little success especially
with more recent demands for lower power and overall system costs in
applications such as metering, security systems, fire detectors and
HVAC systems.
In response to these market demands, TI has introduced a multiband
radio frequency (RF) transceiver, TRF6903, and transmitter, TRF4903.
These devices can wirelessly transmit and/or receive up to 64kbps of
data for the 315, 433, 868, and 915MHz industrial, scientific and
medical (ISM) bands. The devices can interface easily to a baseband
processor such as TIs MSP430. A synchronized data clock, provided by
the TRF6903 and TRF4903, is programmable for most common data
rates, eases baseband processing and reduces code complexity. The
devices work exceptionally well with various MSP430 microprocessor
family members and has complete EVM kits and software available.
The EVM kits for the TRF6903 and TRF4903 are used to demonstrate a
bidirectional RF link between the two boards and for prototyping by
downloading new software code to the MSP430F449 using a JTAG
connector. The schematic and board layouts can be used as a
reference design if desired. A users guide is included.
System Design Software
EasyRF tools for TRF6903: Calculates values for PLL filter, LNA, PA
matching, crystal switch caps, IF matching and S/H capacitors.
EasyRF for TRF4903: Calculates values for PLL filter, PA matching, and
crystal switch caps.
The TRF6903 and TRF4903 are also single-chip solutions for low-cost
multiband Frequency Shift Keying (FSK) or On/Off Keying (OOK) devices
used to establish a frequency-programmable, half-duplex, bidirectional
RF link. The devices operate down to 2.2V and are designed for low
power consumption with a 0.6A standby current.
For frequency hopping systems, these devices are the fastest and most
efficient hoppers available. The TRF6903 and TRF4903 require no
calibration when switching to a new frequency which makes them
highly efficient at high data rates.
Features
Transceiver (TRF6903) and Transmitter (TRF4903) available
315, 433, 868 and 915MHz operation
Apt for frequency hopping protocols
Clock recovery with training recognition
Standby current: 0.6A (typ)
2.2V to 3.6V operation
Output power: +8dBm (typ)
FSK/OOK modes of operation
Data rates up to 64kbps
Industrial temperature range: 40C to +85C
Tools Available
TRF6900 wireless connection for 315, 433, 868, and 915MHz operation.
To download these tools or for further information on ISM RF, please

visit www.ti.com/ismrf
Free samples
Evaluation modules at $149 each:
MSP-TRF6903-DEMO: Two boards equipped with
TRF6903 and MSP430F449
MSP-TRF4903-DEMO: Two boards equipped with
TRF4903 and MSP430F449.
33
MIX_OUT
IF_IN1,2
CER_DIS LPF_IN
LPF Amplifier
Limiter
Mixer
LPF_OUT
SLC_CAP
Ceramic
Discriminator
10.7MHz Ceramic
or Discrete IF Filter
LEARN / HOLD
RF Applications
LNA
RFIN
Data Slicer
Quadrature
Demodulator
OOK
Switch
RSSI
Bit Synchronizer
and
Data Clock
RX_DATA
DCLK
RSSI_OUT
RX_FLAG
Band-gap
/A
Counter
/Div. CTRL
8
6
DET_OUT
Brownout
Detector
/N Prescaler
32/33
Serial
Interface
CLOCK
DATA
STROBE
STDBY
/B
Counter
MODE
Lock
Detect
LOCK_DETECT
PA_OUT
PA
Output
Divider
1, 2, 3
PFD
CPs
VCO
/Ref
2...255
TX_DATA
XTAL
Switch
VCO_TUNE
CP_OUT
XTAL XTAL_SW
Loop Filter
TRF6903 functional block diagram.
Wireless Communication Devices for Industrial Applications

Device
TRF6903
TRF6901
TRF6900A
TRF5901
TRF4903
TRF4900
TRF4400
1Suggested
Description
RF Transceiver
RF Transceiver
RF Transceiver
RF Transceiver
RF Transmitter
RF Transmitter
RF Transmitter
Frequency
(MHz)
(MHz)
(min)
(max)
315
915
860
930
850
950
902
928
315
915
850
950
420
450
Standards Supported
FSK, OOK
FSK, OOK
FSK, Narrow-Band FM
FSK, Narrow-Band FM
FSK, OOK
FSK, Narrow-Band FM
FSK, Narrow-Band FM
Output Power
(dBm)
8
8
5
5
8
7
7
Operating Voltage
(V)
(V)
(min)
(max)
2.2
3.6
1.8
3.6
2.2
3.6
3
3.6
2.2
3.6
2.2
3.3
2.2
3.6
Current
(A)
0.6
0.6
0.5
0.5
0.6
0.5
0.5
Package
PQFP-48
PQFP-48
PQFP-48
PQFP-48
TSSOP-24
TSSOP-24
TSSOP-24
Price1
$2.85
$2.70
$3.20
$3.20
$2.00
$1.90
$1.90
resale price in U.S. dollars in quantities of 1,000.
34
Input/Output Cards, Internal Communication/Interface/Isolation, Core Logic
Programmable Logic Controls (PLC) are widely used in industrial

applications primarily in the areas of factory and process automation.
PLC systems consist of different subsystems realized either as
complete integrated systems or as base unit plus plug-in cards/
modules for different options.
Industrial Analog I/Os
PLCs and field extension modules control large numbers of electronic
actuators, such as motors, solenoids and electronic ballasts. Due to the
wide range of actuators and their different performance requirements, the
XTR300 provides signals in the form of drive voltage or current with
large voltage offset compliance. Typical voltage ranges are 5V, 10V,
while current ranges include 20mA, 10mA, as well as 0-20mA and
4-20mA.
Analog
Inputs
Peripheral Bus
Motor Control
Industrial
PC
PLC
HMI
Digital
Inputs
Relays,
Switches
V dd
For more exotic output ranges, modification of the reference voltage,

VREF, and the gain resistor, ROS, is possible.
The figure to the right (pg 35) shows a typical application for a singlechannel output of 10V or 20mA, depending on the XTR300s digital
control for either voltage or current mode.
A reference voltage is applied to the control DAC, DAC8531, and to the
XTR300. The microcontroller performs device configuration, error
monitoring and also provides the DAC input code. The analog output of
the DAC8531 feeds the input of the XTR300, which then drives the
load behind the terminal connector.
The multi-channel driver shown below uses a quad DAC, DAC8534, to

control four XTR300 drivers, each providing a different output range.
Other
Peripheral
GND
For most applications the setting of just two resistor values (R1 and
R2), as well as the selection between current or voltage mode, is
sufficient to accommodate a wide range of output signals of up to
25mA or 17.5V.
For a floating load, switch S1 provides the option for establishing

ground referred input signals to the instrumentation amplifier. The LC
and RC networks perform RF- and LF-noise rejection.
Analog
Outputs
Digital
Outputs
Intelligent Sensors
Digital control sets the XTR300 into voltage-output or current-output mode.

Error flags indicate over-temperature, load-error, and common-mode error.
V ss
IMON
Current Copy
CC
V IN
ROS
OPA
V REF
V OUT / I OUT
V SENSE+
Gain
Offset
R2
DRV
XTR300
G1
INA
R1
G2
V SENSE
IAOUT
Error Recog. Configguration
Temp , Overld.
V, I, OD
XTR300 functional block diagram.
In addition to these common ranges, many proprietary signal

interfaces exist, which all have one problem in common; tailoring the
electronic drives design to match the required actuators input.
To ease this design task, TI has developed an industrial analog
current/voltage output driver, the XTR300. This device provides an
operational amplifier working as a signal driver in the forward
direction, and an instrumentation amplifier in the feedback loop.
Quad-channel drive with 4 x XTR300.
*Expected XTR300 release date, 2Q 2006.
35
Input/Output Cards, Internal Communication/Interface/Isolation, Core Logic

*
Single-channel drive with XTR300, VIN = 0 4V, VOUT = 10V or IOUT = 20mA.
*Expected XTR300 release date, 2Q 2006.
Device
Description
Key Features
Benefits
Other TI Solutions
Voltage Reference
Dual Converter
Dual Converter
SWIFT Buck Converter
Drift = 20ppm/C, 4.097V, 0.2%

Adjustable Output (0.9V 3.3V), 1.5A

REF02, REF102
DCP010515
DCP010505
TPS64200
Instrumentation Amp
Isolation Amp
Prog. Gain INA
Low Noise Amp
PWM Driver
Linear Power Amp
Linear Power Amp
I/O Driver
Gain = 1 to 1000, CMRR > 110dB, 8-Pin

Isolation = 2400V, Output = 10V
Gain of 1, 10, 100, 1000, Precision
VN = 3nV, CMRR > 120dB, VS = 536V
3A Max, High Efficiency, Tiny Package
2A, RRIO 300mV to Rail, Adj Current Limit
2.4A, RRO 200mV to Rail, Thermal Protection
10V, 20mA, Input/Output
Very Low Power

No External Components Required
Small Package
Very Low Noise, Small Package
Single 5V Supply, Tiny Package
Unity Gain Stable, 2.7V to 5.5V supply, Shutdown, Small Package
Single 5V, Tiny Package, Complete Solution
Multipurpose I/O Driver for All Industrial I/O Voltage Currents
INA128
ISO122
PGA203
OPA350, OPA725
DRV104
OPA647
OPA549
Single 5V Supply, Power Only 2mW, Single 5V Supply for Bipolar

SPI Compatible Serial Output with Daisy-Chain (TAG) Feature,
Uses Internal and External Reference
High-Speed Parallel Interface, Single 5V Analog Supply,
Low Power, Zero Latency
Excellent Performance, Only 7.5mW, Single 5V Supply
16 SE or 8 Diff, 2.8VRMS at 1.8kSPS, Fixed or Auto Channel Scan
Small Package
Single 5V, Small Package
Excellent Price/Performance Ratio, Double Buffered Input Architecture
Power-On Reset to Zero-Scale, Schmitt-Triggered Inputs
4-Quadrant Multiplying Reference, 10V VREF, 3-Wire Interface
ADS8320
ADS7809
ADS8508/7808
ADS8412,
ADS8402
ADS1252
DAC7741
DAC7641
DAC8532

REF3140
DCV010515D
DCV010505D
TPS54110
Amplifiers
INA118
ISO124
PGA204
OPA227
DRV591
OPA567
OPA569
XTR300
Data Converters
ADS8325
ADS8509
ADS8406
16-Bit, 100kSPS ADC

16-Bit, 250kHz, CMOS
Bipolar ADC
16-Bit, 1.25MSPS
ADS1251
ADS1258
DAC7731
DAC7631
DAC8534
DAC8554
DAC8811
24-Bit, 20kSPS ADC

16-Channel, 24-Bit ADC
16-Bit, 5s Settling Time
16-Bit, 10s Settling time
Quad, 16-Bit DAC
16-Bit, Quad Channel
16-Bit, Multiplying
Power = 2mW, 8-Pin, SFDR = 86dB, Power = 82mW

250kHz Sampling Rate, 2.0LSB Max INL,
1LSB Max DNL, 16-Bit No Missing Code
Pseudo-Bipolar, Differential Input, VREF to VREF
90dB SNR, 95dB THD at 100kHz Input
Power = 155mW, 8-Pin, SFDR = 100dB,
125kSPS, Auto-scan Rate: 23.7kSPS, 24-Bit NMC
Output = 10V, INL = 0.0015%
Power < 2mW, Output = 2.5V
Low Power, 16-Bit Swing DAC
Power Supply +2.7V to +5.5V
0.5LSB DNL, 1LSB INL, Serial Input
PCI-PCI Bridge
RS-485
M-LVDS Transceiver
Half-Duplex Transceiver
Gigabit Ethernet TRX
66MHz, 32-Bit
Failsafe, Extended Common Mode, RX EQ
100Mbps, 8-Pin Package
5V Supply, MSOP-8, 10Mbps
10-Bit Interface, 1 1.6Gbps Serial
Only RX with EQ in Industry

First M-LVDS Complete Transceiver
Thermal Shutdown Protection, Low Supply Current
Power < 200mW
PCI2250
SN65HVD23
SN65MLVD202A
TLK1501, TLK1201
Active Filter
Analog Mux
Free Design Software
Low-, High- or Band-Pass Filter

Analog Input = 15V
Design Low Pass Filters, Quick, Easy
Fully Integrated Active Filter
Free, www.ti.com/filterpro
RC Filter
Interface
PCI2050B
SN65HVD24
SN65MLVD200A
SN65HVD485E
TLK2201
Other
UAF42
MPC50x
FilterProTM
Preview devices are listed in bold blue.
36
Field Bus Systems
Factory Communications
Industrial Automation is the computerization of manufacturing and process

steps, which workers cant carry out as fast, as precise or as often as a
machine. Traditionally Industrial Automation has been separated into two
major categories: Factory Automation and Process Automation.
simply all-digital, serial, two-way communication systems that serve

as a Local Area Networks (LAN) for factory/plant instrumentation
monitoring and device control.
Controller
Bus Interface
Isolation
S1 S2 S3
Acid Alkali
3 Axis Robots
Heating
B
W eights
Conveyor Belts
Scales
Batch
pH
setting Reactor
Storage
Tank
Transceiver
Transceiver
Transceiver
Transceiver
Bus
Interface
Bus
Interface
Bus
Interface
Bus
Interface
Sensor
Recycled
W aste
Process Automation.
Factory Automation senses and drives physical quantities such as pressure,

temperature, flow, force vibration, mass and density. Applications typically
require 10-12 bits of resolution and communicate at rates between 50 and
400kbps. However, there are several technologies that communicate at much
faster signaling rates, such as PROFIBUS DP running at 12Mbps.
Process Automation performs compositional measurements such as
conductivity, pH and chemical analysis in addition to physical quantities as in
Factory Automation. Applications typically require 16-bits of resolution and
communication rates between 10 and 50kbps.
Nodes in Industrial Automation environments are grouped into three

distinct families: controllers, sensors and actuator. As the name
suggests, controllers are used to manage variables such as
temperature based on pre-determined values and information provided
by sensors. If the difference between a predetermined and sensed
value exceeds a certain limit, the controller tries to manipulate the
variable through an actuator such as a cooler. The number of nodes
and the distance separating these nodes can vary greatly, which creates
the need for specialized communications called industrial networks.
In the 1940s, process instrumentation used 3 to 15psi pressure signals
for monitoring control devices. By the 1960s, the first standardized
communication method was introducedthe 4-20mA technique of
pure analog current-loop signaling. By the nature of the technology,
every node requires its own set of cabling between the controller and
itself, which creates a maze of cables, yet it is still used extensively in
industrial networks. In the 1970s, industrial applications began using
programmable logic controllers (PLCs) and digital computers. By the
mid 1980s, industrys quest for a standardized all-digital field-bus
became a reality. However, major industrial companies and countries,
mainly Germany, France and the U.S., did not let go of their de facto
standards, so multiple competing standards came into use such as
PROFIBUS, InterBus, DeviceNet and others. These field-buses are
Field Bus
Cooling
Process Control Facility
Factory Automation.
Transceiver
Device
Configuration
Motor
Starter
Motor
Controller
Process automation system.
Requirements in Industrial Environments

Many hazards threaten the various electrical devices and it is difficult to
encase or protect interface cabling. Both device and network must be
able to maintain operation even under the most undesirable
conditions. Common hazards include:
Power surges (e.g. of nearby motors)
Ground potential differences (e.g. due to equalizing currents)
Electrostatic Discharge (ESD)
Excessive number of nodes (e.g. in flow control many sensors and
actuator)
Long cable lengths in large factories
In order to maintain operation under such circumstances, devices need
the following properties:
Immunity to power surges (transient suppression)
Wide common-mode range
High ESD protection
Low unit load, allowing for many nodes
High output drive, high sensitivity, receiver equalization,
pre-emphasis
Download Interface
Selection Guide at:
interface.ti.com
Field Bus Systems
37
5V, RS-485 Transceivers with Integrated

Transient Suppression
Extended Common Mode Transceivers with

Optional Receiver Equalization
SN65LBC184, SN65LBC182
SN65HVD2x

www.ti.com/sc/device/SN65LBC184,
www.ti.com/sc/device/SN65LBC182

www.ti.com/sc/device/SN65HVD20
The SN65LBC184 differential data line transceiver is available in the

trade-standard footprint of the SN75176 with built-in protection
against high-energy noise transients. This feature provides a substantial
increase in reliability for better immunity to noise surges coupled to
the data cable over most existing devices. Use of these circuits provides
a reliable low-cost, direct-coupled (with no isolation transformer) data
line interface without requiring any external components. The
SN65LBC184 can withstand over-voltage transients of 400W peak (typical). The conventional combination wave called out in IEC 61000-4-5
simulates the over-voltage transient and models a unidirectional surge
caused by inductive switching and secondary lightning transients.
Key Features (LBC184)
Integrated transient voltage suppression
Standard RS-485 common-mode voltage range: 7V to 12V
JEDEC and IEC ESD protection:
30kV IEC 61000-4-2, contact discharge
15kV IEC 61000-4-2, air-gap discharge
15kV EIA/JEDEC, human body model
Up to 128 nodes on a bus (1/4 unit-load)
The SN65HVD2x device series offers a very wide input voltage operating
range. The RS-485 standard requires functionality at DC-levels at the
receiver input between 7V and +12V (7V plus swing of up to 5V).
These devices nearly triple this requirement and are fully functional
between 20V and +25V, while surviving 27V and transients up to 60V.
Key Features
Common-mode voltage range (20V to +25V) more than doubles
TIA/EIA-485 requirement
Best-in-class ESD protection in the industry: 16kV HBM
Up to 256 nodes on a bus (HVD21, 22 and 24) (1/8 unit-load)
Optional receiver equalization (HVD23 and HVD24)
1.2V
Common-Mode
Voltage
11V
Common-Mode
10V
5V
Voltage
2.7V
Common-Mode
Voltage
7V ground
6V 7V
noise shift
200mV
+200mV
200mV
4
D
Receiver
Sensitivity
Levels
25V
Common-Mode
Voltage
24V 23V
+200mV
200mV
Common-Mode
Voltage
2.7V
18V
Common-Mode
>20V ground
Voltage
noise shift
19V 20V
Receiver
Sensitivity
Levels
RS-485 standard operation.
HVD2x with
extended VICR
DE
+200mV
RS-485 Standard
+200mV
200mV
Receiver
Sensitivity
Levels
Receiver
Sensitivity
Levels
HVD2xs wide common-mode voltage range.

+25 V
20 V
SN65HVD2x
2
RE
R
A
7 B BUS
20 V 15 V 10 V 5 V
0 V
5V
10 V
15 V
20 V
25 V
Functional logic diagram (positive logic).

SN65HVD2x extended common-mode voltage range.
V
VP
1/2 VP
1.2 s
50s
Surge waveform combination wave.
Numbers
SN65HVD20
SN65HVD21
SN65HVD22
SN65HVD23
SN65HVD24
Cable Length and

Signaling Rate
Up to 50m at 25Mbps
Up to 150m at 5Mbps (with Slew Rate Limit)
Up to 1200m at 500kbps (with Slew Rate Limit)
Up to 160m at 25Mbps (with Receiver Equalization)
Up to 500m at 3Mbps (with Receiver Equalization)
Number of Nodes
Up to 64
Up to 256
Up to 256
Up to 64
Up to 256
38
Field Bus Systems
PROFIBUS Transceiver
3.3V and 5V CAN Transceivers
SN65HVD1176
SN65HVD23x, SN65HVD251

www.ti.com/sc/device/SN65HVD1176

www.ti.com/sc/device/PARTnumber
(Replace PARTnumber with SN65HVD230, SN65HVD231, SN65HVD232,
SN65HVD233, SN65HVD234, SN65HVD235 or SN65HVD251)
PROFIBUS is the most frequently used process-automation bus in

Europe, and is growing in use in other regions. Despite this fact, the
selection of suitable transceivers is very limited. In fact, for many
years, TIs SN65ALS1176 has been the only device approved by the
PROFIBUS User Organization. The reason for this is that a high output
drive is required (minimum 2.1V differential) and at the same time, the
bus-capacitance must not exceed 10pF. These requirements actually
oppose each other and the combination is hard to achieve. The
SN65HVD1176 fulfills all PROFIBUS requirements, plus offers very
good noise rejection to common-mode noise and has significantly
improved timing parameters.
Key Features
Standard RS-485 common-mode voltage range: 7V to 12V
High ESD protection of 10kV HBM
Up to 160 nodes on a bus (1/5 unit-load)
High output drive: differential output exceeds 2.1V
VCC
RE
DE
GND
HVD1176 functional block diagram.
The SN65HVD251 (5V) and SN65HVD23x (3.3V) families of CAN

transceivers are intended for use in harsh environment applications.
They feature cross-wire, loss-of-ground, over-voltage and overtemperature protection, wide common-mode range and can withstand
common-mode transients of 200V. The SN65HVD230/1/2 operate over
a 2V to 7V CMR on the bus, and can withstand common-mode
transients of 25V. SN65HVD233/4/5 and SN65HVD251 operate over
a 7V to 12V CMR and will withstand transients of 100V and 50V,
respectively.
Key Features (SN65HVD251)
Drop-in improved replacements for the PCA82C250 and PCA82C251
Bus-fault protection of 36V
Bus-pin ESD protection exceeds 14kV HBM
High input impedance allows up to 120 SN65HVD251 nodes
Meets or exceeds the requirements of ISO 11898
Applications
CAN data buses:
DeviceNet data buses
Smart distributed systems (SDS)
SAE J1939 standard data bus interface
NMEA 2000 standard data bus interface
ISO 11783 standard data bus interface
VCC
VREF
D
RS
CANH
CANL
Functional diagram (positive logic).
ISO 11898 Specification
Implementation
Application Specific Layer

Data-Link
Layer
DSP or MCU
Embedded
Stand-Alone
CAN Controller
Logic Link Control

Medium Access Control
Physical Signaling
Physical
Layer
SN65HVD251
Physical Medium Attachment

Medium Dependent Interface
CAN Bus-Line
Field Bus Systems
39
High-Performance 1394-1995 Link Layer for
Industrial and Bridge Applications
USB-to-Serial Bridge
TUSB3410
TSB42AC3

www.ti.com/sc/device/TUSB3410

www.ti.com/sc/device/TSB42AC3
The TSB42AC3 is a 1394-1995 general-purpose link layer ideal for a

wide range of applications. The TSB42AC3 provides a high-performance
interface with the capability of transferring data between the 32-bit
host controller and the 1394 PHY-link interface. The 1394 PHY-link
interface provides the connection to the 1394 device. The LLC provides
the control for transmitting and receiving 1394 packet data between
the FIFO and PHY-link interface at rates of 50 (backplane only), 100,
200 and 400Mbit/s.
Key Features
Generic 32-bit, 50MHz host bus interface
Programmable 10K byte total for asynchronous, isochronous and
general FIFO
Separate ACK FIFO register decreases SCK-tracking burden on the host
Additional programmable status output to pins
Completely software compatible with the TSB12LV01B
IEEE 1149.1 JTAG interface to support board level scan testing
Host
Processor
I
n
t
e
r
f
a
c
e
CRC
Cycle
Monitor
GRF
Receiver
Configuration Registers (CFR)
TSB42AC3 functional block diagram.
8052 Core
24 MHz
USB
TxR
16K x 8
RAM
2K x 8
SRAM
P
h
y
s
i
c
a
l
I
n
t
e
r
f
a
c
e
8
2 x 16-Bit
Timers
10K x 8
ROM
LINK CORE
Cycle
Timer
ITF
Clock
Oscillator
DP,
DM
ACK
ATF
12 MHz
Transmitter
H
o
s
t
Key Features
Built-in, two-channel DMA controller for USB/UART bulk I/O
Enhanced UART features including programmable software/
hardware flow control and automatic RS-485 bus transceiver
control, with and without echo
PLL
and
Dividers
Applications
Motor/motion/process control
Industrial imaging
FIFO
The TUSB3410 provides an easy way to move your UART device to a

fast, flexible USB interface by bridging between a USB port and an
enhanced UART serial port. The TUSB3410 contains all the necessary
logic to communicate with the host computer using the USB bus. The
TUSB3410 can be used to build an interface between a legacy serial
peripheral device and a PC with USB ports, such as a legacy-free PC.
An evaluation module can jump-start your USB development, or you
can use it as a complete USB-to-RS-232 converter.
4
P3
(4, 3, 1, 0)
Port 3
8
8
I2C
Controller
I2C Bus
8
DMA-1
DMA-3
8
CPU-I/F
Susp./Res.
USB
SIE
Serial
Bus
RTS
CTS
DTR
DSR
8
8
UBM
USB Buffer
Manager
UART-1
SIN
SOUT
TDM
Control
Logic
IR
Encoder
M
U
X
M
U
X
IR
Encoder
SOUT/
IR_SOUT
SIN/
IR_SIN
The TUSB3410 can support a total of three input and three output
(interrupt, bulk) endpoints.
40
Field Bus Systems
USB-Based Controller with MCU GPIO
Quad UART with 64-Byte FIFO
TUSB3210
TL16C754B

www.ti.com/sc/device/TUSB3210

www.ti.com/sc/device/TL16C754B
The TUSB3210 is a USB-based controller with a general-purpose,

industry-standard 8052 MCU and a 32 GPIO. It contains 8K x 8 RAM
space for application development. The TUSB3210 is programmable,
making it flexible enough to use for a variety of general USB I/O
applications.
Texas Instruments wide portfolio of space-saving, performanceenhancing UARTs are pin-for-pin compatible with many leading UART
manufacturers devices.
Key Features
Supports 12Mbps USB data rate (full speed)
Supports USB suspend/resume and remote wake-up operation
Integrated 8052 microcontroller
Applications
Industrial automation controls
Base stations
Cell phones
PCs
12 MHz
Clock
Oscillator
PLL
and
Dividers
Reset,
Interrupt
and WDT
8052
Core
Key Features
3.3V and 5V operating voltages available
64-byte programmable trigger-level FIFO buffering
Up to 3.2Mbps data transfer rate
Bus
Interface
USB-0
6K x 8
ROM
USB
TxR
Modem Control Signals

Control Signals
Status Signals
RSTI
2x16-Bit
Timers
Control and
Status Block
Divisor
Control Signals
8K x 8
RAM [1]
Port 0
P0.[7:0]
Port 1
P1.[7:0]
Port 2
P2.[7:0]
Port 3
P3.[7:0]
Status Signals
Baud Rate
Generator
UART_CLK
8
512 x 8
SRAM
Receiver
FIFO 64-Byte
Receiver
Block Logic
Vote
Logic
RX
Logic
USB
SIE
8
CPU - I/F
Suspend/
Resume
UBM
USB Buffer
Manager
I 2C
Controller
I2C Bus
TDM
Control
Logic
Transmitter
FIFO 64-Byte
Transmitter
Block Logic
TX
TX
Channel A
Channel B
Channel C
Channel D
TL16C754B functional block diagram.
TUSB3210 functional block diagram.
USB Port Transient Suppressors

SN65220, SN65240
www.ti.com/sc/device/SN65220, www.ti.com/sc/device/SN65240
The SN65220 is a single transient voltage suppressor and the

SN65240 is a dual transient voltage suppressor designed to provide
electrical transient protection to full-speed USB ports.
Key Features
Designed to protect USB host, hub or peripheral ports
Packaging: Tiny WCSP Chip-Scale
SN65220
or 1/2 SNx240
USB 1.1 Host

or Hub-Port
Transceiver
15k
27
D+
D+
27
15k
GND
15k
27
USB 1.1
Downstream
Transceiver
GND
SN65220
or 1/2 SNx240
SN65220
or 1/2 SNx240
B
D
27
D
15k
SN65220 functional block diagram.
RX
Field Bus Systems
41
Dual Channel 16-Byte FIFOs UART
Dual Channel 64-Byte FIFOs UART
TL16C2550
TL16C752B

www.ti.com/sc/device/TL16C2550

www.ti.com/sc/device/TL16C752B
The TL16C2550 is a dual universal asynchronous receiver and transmitter

(UART). It incorporates the functionality of two TL16C550D UARTs,
each UART having its own register set and FIFOs. The two UARTs
share only the data bus interface and clock source, otherwise they
operate independently. Another name for the UART function is
Asynchronous Communications Element (ACE), and these terms will be
used interchangeably.
The TL16C752B is a dual universal asynchronous receiver/transmitter

(UART) with 64-byte FIFOs, automatic hardware/software flow control,
and data rates up to 3Mbps. The TL16C752B offers enhanced
features. It has a transmission control register (TCR) that stores receiver
FIFO threshold levels to start/stop transmission during hardware and
software flow control. With the FIFO RDY register, the software gets
the status of TXRDY/RXRDY for all four ports in one access. On-chip
status registers provide the user with error indications, operational
status, and modem interface control. System interrupts may be tailored
to meet user requirements. An internal loopback capability allows
onboard diagnostics. The TL16C752B is available in a 48-pin PT (LQFP)
package.
Key Features
Up to 1.5Mbps (5V), 1.25Mbps (3.3V) and 1Mbps (2.5V) operation
Programmable auto-RTS and auto-CTS
Programmable baud rate generator
Packaging: 5mm x 5mm 32-pin QFN (RHB) and 48-pin QFP
Key Features
TI patented programmable auto-RTS and auto-CTS
XON/XOFF software flow control
Up to 3Mbps baud rate at 3.3V
Programmable and selectable transmit and receive FIFO trigger
levels
Applications
Point-of-sale terminals
Gaming terminals
Portable applications
Router control
Cellular data
UART Channel A
A2-A0
D7-D0
CSA
CSB
IOR
IOW
INTA
INTB
16 Byte Tx FIFO
Data
Bus
Interface
DSRA, RIA, CDA

64 Byte Rx FIFO
Rx
RTSA
RXA
UART Channel A
UART Channel B
RESET
UART Regs
16 Byte Tx FIFO
TXB
Tx
CTSB
OPB, DTRB
BAUD
Rate
Gen
XTAL1
TXA
CTSA
OPA, DTRA
UART Regs
BAUD
Rate
Gen
TXRDYA
TXRDYB
RXRDYA
RXRDYB
XTAL2
Tx
Applications
Telecommunication routers
Handheld terminals
Mobile computing
Factory automation
Crystal
OSC
Buffer
TL16C2550 functional block diagram.
64 Byte Rx FIFO
DSRB, RIB, CDB

Rx
RTSB
RXB
VCC
GND
A2-A0
D7-D0
CSA
CSB
IOR
IOW
INTA
INTB
64 Byte Tx FIFO
Data
Bus
Interface
DSRA, RIA, CDA

64 Byte Rx FIFO
Rx
RTSA
RXA
Tx
CTSB
UART Channel B
64 Byte Tx FIFO
TXB
OPB, DTRB
UART Regs
RESET
BAUD
Rate
Gen
XTAL2
TXA
CTSA
OPA, DTRA
UART Regs
BAUD
Rate
Gen
TXRDYA
TXRDYB
RXRDYA
RXRDYB
XTAL1
Tx
Crystal
OSC
Buffer
64 Byte Rx FIFO
DSRB, RIB, CDB

Rx
RTSB
RXB
VCC
GND
TL16C752B functional block diagram.
42
Field Bus Systems
Package(s)
32-QFN, 44-PLCC,
48-TQFP
32-QFN, 44-PLCC
Description
Dual UART with Programmable Auto-RTS and Auto-CTS
Price1
Call
Dual UART with Programmable Auto-RTS and Auto-CTS
Call
Single UART
Single UART with Parallel Port
Dual UART with Parallel Port
Single UART with Hardware Auto Flow Control
$1.50
$2.50
$2.55
$1.75
$1.75
0 to 70
0 to 70, 40 to 85
40-DIP, 44-PLCC
68-PLCC
68-PLCC
40-DIP, 44-PLCC
48-LQFP, 48-TQFP
32-QFN,
48-LQFP, 48-TQFP
68-PLCC
68-PLCC, 80-TQFP
Dual UART with Parallel Port, Recommend TL16C552A

Dual UART with Parallel Port
$3.90
$3.85
0 to 70, 40 to 85
68-PLCC, 80-LQFP
Quad UART, Recommend TL16C554A
$6.05
16-Byte
0 to 70, 40 to 85
68-PLCC, 80-LQFP
Quad UART with Hardware Auto Flow Control
$6.00
16-, 64-Byte
0 to 70, 40 to 85
44-PLCC, 64-LQFP
$3.70
TL16C752B
64-Byte
3.3
0 to 70, 40 to 85
48-LQFP, 48-TQFP
TL16C752C
64-Byte
2.5/3.3/5
0 to 70, 40 to 85
32-QFN, 48-TQFP
TL16C754B
64-Byte
3.3/5
0 to 70, 40 to 85
68-PLCC, 80-LQFP
TL16C754C
64-Byte
2.5/3.3/5
0 to 70, 40 to 85
80-LQFP
TL16PC564B/BLV
TL16PIR552
1
2
16-, 64-Byte
16-Byte
3.3/5
5
0 to 70
0 to 70
100-BGA, 100-LQFP
80-QFP

Lower Power Modes
Dual UART with Hardware Auto Flow Control
Lower Power Modes
Lower Power Modes, RS-485 and IrDA interface
Lower Power Modes
Lower Power Modes
Single UART with PCMCIA Interface
Dual UART with Selectable IR & 1284 Modes
Device
TL16C2550
Channel(s)
2
FIFOs
16-Byte
Voltage(V)
2.5/3.3/5
Characterized Temp (C)

0 to 70, 40 to 85
TL16C2552
16-Byte
2.5/3.3/5
0 to 70, 40 to 85
TL16C450
TL16C451
TL16C452
TL16C550C
1
1
2
1
None
None
None
16-Byte
5
5
5
3.3/5
0 to 70
0 to 70
0 to 70
0 to 70, 40 to 85
TL16C550D
16-Byte
2.5/3.3/5
0 to 70, 40 to 85
TL16C552
TL16C552A
2
2
16-Byte
16-Byte
5
5
TL16C554
16-Byte
TL16C554A
TL16C750
1Suggested
$3.10
Call
$8.35
Call
$5.90/$6.10
$6.10
Preview devices appear in bold blue.
43
Digital Coupler and Isolation Amplifiers
There are many applications where it is desirable, even essential, that

a sensor not have a direct (galvanic) electrical connection with the
system to which it is supplying data in order to avoid either dangerous
voltages or currents from one half of the system from damaging the
other half. Such a system is said to be "isolated", and the area which
passes a signal without galvanic connections is known as an "isolation
barrier".
Isolation
Applications for Isolation Amplifiers
Sensor is at a high potential relative to other circuitry (or may
become so under fault conditions)
Sensor may not carry dangerous voltages, irrespective of faults
in other circuitry (e.g. patient monitoring and intrinsically safe
equipment for use with explosive gases)
To break ground loops
Isolation barrier protection works in both directions, and may be

needed in either half of the system, sometimes both. Common
applications requiring isolation protection are those where sensors
may accidentally encounter high voltages, and the system it is driving
must be protected. Or a sensor may need to be isolated from
accidental high voltages arising downstream in order to protect its
environment: examples include prevention of explosive gas ignition
caused by sparks at sensor locations or protecting patients from
electric shock by ECG, EEG and EMG test and monitoring equipment.
The ECG application may require isolation barriers in both directions:
the patient must be protected from the very high voltages (>7.5kV)
applied by the defibrillator, and the technician handling the device
must be protected from unexpected feedback.
Isolation Amplifier Design

Obstacles in isolation amplifier design include offset, drift, gain
accuracy, and nonlinearity or distortion. The high-performance isolation
amplifier applies either linear optocouplers (LOCs), or modulators with
digital capacitive isolation, either of which is implemented differentially
to increase linearity over a large signal range. Isolation amps use
dual-feedback circuit topology to significantly reduce distortion.
While feedback across the barrier corrects for these errors, it only does
so as long as the circuit on each side of the barrier is an exact match.
This is difficult to achieve as the circuits are not on the same piece of
silicon. In integrated circuit isolation amplifiers, the output and
feedback demodulator are made from adjacent die from the same
silicon wafer, allowing for better matching than discrete designs.
+15V
10V
REF102
R1
27k
Isothermal Block
with 1N4148
+15V
R2 1M
Thermocouple
R3
100 R
+15V 15V +15V 15V
R4
RG
INA128
R5
50
6
In ISO124
V OUT
Gnd
15V
100
Zero Adjust
Isolated temperature measurement with dual supplies.

Isolated temperature measurement with single supply.
VEXC
R1
EEPROM
SCL
VIN2
VSA
Bridge
Sensor
C1
R2
C2
VREG
VREF
SDA
VSO
C3
PGA309
VIN1
GNDA
VO
GNDD
R3
R4
C4
VS
R6
In XTR115
IOUT
IREF
+VS1
4-20mA
RCV420
GND
Pressure measurement with digital calibration via isolated 4-20mA current loop.
+VS2 VS2
In
ISO
124
VOUT
VS1
44
Isolation
Digital Coupler and Isolation Amplifiers
Galvanic Isolation Solutions

System designers must contend with poor power quality, ground faults,
and lightning strikes interfering with or disrupting system performance.
Additionally, the distance between the nodes on a network can be
substantial and often AC outlets from different ground domains power
the nodes. The potential difference between these ground domains
may include a dc bias, 50 or 60Hz AC harmonics, and various transient
noise components.
If these grounds are connected together by a cable logic ground or
shielding, a ground loop can exist and current will flow into the cable.
Ground-loop currents can have severe effects on a network, including
the degradation of data, excessive EMI, component damage, and when
the potential difference is large enough, a human electrical hazard.
New techniques that use magnetic coupling for isolation may still
share the deficiencies of the older solutions such as the absence of a
fail-safe output, an inability to operate with DC-only signals and a
restricted operating temperature range. Additionally, new concerns
associated with the inductors susceptibility to external magnetic fields
and curtailed operating life under high voltage conditions may arise.
TI isolation solutions are designed to eliminate problems associated
with existing isolation technologies. Problems such as high power
consumption, no fail-safe output, low signaling rates and high
pulse-width distortion are common. When using optocouplers, the low
efficiency with which the electro-optical conversion occurs is especially
problematic as the amount of current required to turn on the
phototransistor increases with the age of the part. This is due to the
LEDs reduction of light emission over time, which is accelerated by
high operating temperatures.
3.3V High-Speed Digital Isolators

ISO721
Get samples, datasheets and app reports at: www.ti.com/sc/device/ISO721
The ISO721 digital isolator is a logic input and output buffer separated
by a silicon oxide (SiO2) insulation barrier that provides galvanic
isolation of up to 4000V. Used in conjunction with isolated power
supplies, the device prevents noise currents on a data bus or other
circuits from entering the local ground and interfering with or
damaging sensitive circuitry.
A binary input signal is conditioned, translated to a balanced signal,
then differentiated by the capacitive isolation barrier. Across the
isolation barrier, a differential comparator receives the logic transition
information, then sets or resets a flip-flop and the output circuit
accordingly. A periodic update pulse is sent across the barrier to
ensure the proper dc level of the output. If this dc-refresh pulse is not
received for more than 4s, the input is assumed to be unpowered or
not functional, and the fail-safe circuit drives the output to a logic
high state.
Key Features
4000V isolation
Fail-safe output
Signaling rate up to 100Mbps
UL 1577, IEC 60747-5-2 (VDE 0884, Rev. 2), IEC 61010-1
and CSA Approved
25kV/s transient immunity
DC Channel
Isolation
Barrier
Filter
The ISO721 and ISO722 provide isolation solutions solving all of these
problems. Other isolation products currently in development at TI
include multi-channel isolators, isolated CAN and RS-485 transceivers,
isolated op amps, isolated data converters and an isolated gate
controller interface.
OSC
+
PWM
PWD
VREF
POR
Carrier
Detect
BIAS
POR
Data MUX
IN
Input
+
Filter
AC Detect
VREF
3-State
Output
Buffer
(722 Only)
EN
OUT
AC Channel
ISO721 functional block diagram.
45
Power Management Solutions (Continued)

Application-Specific
Multi-Output
Solutions
Linear Regulators (LDO)
System
Voltages
Step-Up DC/DC
Converters
Audio Supply
Photoflash
Capacitor Chargers
Inductorless
DC/DC Regulators
(Charge Pumps)
Noise-Sensitive
RF Circuitry
Photo Flash
White LED Drivers
Battery Management
LED Light
Application-Specific
Multi-Output
Solutions
LCD Color
Display
DC
Inputs
Memory
Linear Regulators
Battery Charge
Management
Step-Down
DC/DC Converters
Lithium-Ion
Protection and
Authentication
for Batteries
Supervisory
Circuits
(Voltage
Supervisors)
I 2C
DSP,
C
Reset
Rechargeable
Battery
Power Management Solutions

Battery Chargers
Device
bq2002
bq2057
bq24100
bq24200
bq24010
bq24020
bq24030
bq25010
Description
NiMH/NiCd Charger for Current-Limited Power Supplies
1- to 2-Cell Linear Li-Ion Charge Controller in MSOP
1- to 3-Cell Li-Ion Fully Integrated Switch-Mode Charger in QFN
1-Cell Li-Ion Fully Integrated Charger for Current-Limited Power Supplies
1-Cell Li-Ion Fully Integrated Charger in QFN
1-Cell Li-Ion Fully Integrated Charger for AC/DC Adapter and USB in QFN
1-Cell Li-Ion Charger for AC/DC Adapter and USB with Dynamic Power Path
Management in QFN
Single-Chip Li-Ion Charger with Adjustable DC/DC Converter in QFN
Battery Fuel Gauges

bq26220
bq27000
bq27200
bq20z80
Description
10mA, 1.2A Micro-Power LDO in SC-70
50mA, 3.2A Micro-Power LDO in SC-70
100mA, Low-Cost LDO in SOT-23
150mA, Low-Noise, Low-VIN LDO in SOT-23
200mA, Low-Noise, High PSRR LDO in SOT-23 and WCSP
200mA, Ultra-Low Noise, High PSRR LDO in WCSP
250mA, Dual Output, Ultra-Low Noise, High PSRR LDO in WCSP
400mA, Cap-Free, Reverse-Leakage Protection LDO in SOT-23 and QFN
500mA, Low-Noise, High PSRR LDO in SOT-223
1A, Low-Noise, High PSRR LDO in SOT-223
LED Backlight and Camera Flash Solutions
USB
Battery
Fuel Gauges
Device
TPS79718
TPS71533
TPS76301
TPS72118
TPS79301
TPS79901
TPS71157
TPS73601
TPS79501
TPS79601
1- to 2-Cell Li-Ion Battery Monitor with HDQ Interface

1- to 2-Cell Li-Ion Battery Fuel Gauge with HDQ in QFN and WCSP
1- to 2-Cell Li-Ion Battery Fuel Gauge with I2C in QFN and WCSP
2- to 4-Cell Li-Ion SMBus Battery Fuel Gauge with Impedance TrackTM
Technology
2- to 4-Cell Li-Ion SMBus Battery Fuel Gauge
TPS61041
TPS61042
TPS61060
250mA Switch Boost Converter, up to 28V in SOT-23

500mA Switch, Current-Regulated Boost Converter in QFN
375mA Switch, Current-Regulated, Synchronous Boost Converter in
QFN and WCSP
REG71055 Low-Cost Charge Pump for Up to 3 Parallel White LED in ThinSOT-23
TPS60230 5-Channel, Current-Regulated White LED Charge Pump in QFN
TPS60231 3-Channel, Current Regulated White LED Charge Pump in QFN
TPS65552A Xenon FLASH Charger for Digital Still Cameras with Integrated IGBT Driver
TPS61020 1.5A Switch Boost Converter in QFN for White LED FLASH
DC/DC Boost (Step-Up) Solutions

TPS61041
TPS61040
TPS61070
TPS61010
TPS61020
TPS61030
250mA Switch Boost Converter, Up to 28V in SOT-23

400mA Switch Boost Converter, Up to 28V in SOT-23
600mA Switch Boost Converter in ThinSOT-23 for
1- and 2-Cell Alkaline Applications
1A Switch Boost Converter
1.5A Switch Boost Converter in QFN
4A Switch Boost Converter in QFN
Display Power Solutions

TPS61045
TPS65110
TPS65120
TPS65130
TPS65100
375mA Switch Boost Converter, Up to 28V in QFN

3-Channel Small Form-Factor LTPS Display Power Supply in QFN
4-Channel Small Form-Factor TFT Display Power Supply in QFN
2-Channel, Positive/Negative Power Supply for OLED Displays in QFN
4-Channel Large Form-Factor TFT Display Power Supply
Supply Voltage Supervisors
Battery Authentication and Protection
TPS3836E18
TPS3808G01
TPS3801-01
TPS3110E12
TPS3806I33
bq26150
Complete Power Management Units
bq2084
CRC-Based Battery Authentication IC
DC/DC Buck (Step-Down) Solutions for Core and I/O

TPS62200
TPS62220
TPS62300
TPS62050
TPS62040
TPS64200
TPS62110
TPS63700
300mA, 1MHz Step-Down Converter with 12A Quiescent Current in SOT-23

400mA, 1.25MHz Step-Down Converter with 15A Quiescent Current in
ThinSOT-23
500mA, 3MHz High-Accuracy Step-Down Converter with 1H inductor in
WCSP and QFN
800mA, 10V VIN Step-Down Converter with 12A Quiescent Current in QFN-10
1.2A, 1.25MHz Step-Down Converter with 18A Quiescent Current in QFN-10
3A Step-Down Controller in SOT-23
Adjustable, 17VIN and 1.5AOUT Step-Down DC/DC Converter in 4x4 QFN
Adjustable, Up to 15VOUT, Inverting DC/DC Converter in 3x3 QFN
TPS65010
250nA, Supply Voltage Supervisor in SOT-23

2.4A, Programmable Delay Supply Voltage Supervisor in SOT-23
9A, Ultra-Small Supply Voltage Supervisor in SC-70
1.2A, Dual Supply Voltage Supervisor in SOT-23
3A, Dual Supply Voltage Supervisor in SOT-23
1-Cell Li-Ion Charger, 1.2A and 400mA Step-Down Converter,
2 LDO with I2C in QFN
46
Power
Switches
USB
ExpressCard USB Peripheral
PCMCIA
Backplane
Fusion Digital Power Solutions

Power
Factor
Correction
AC Line
PWM
Controllers
MOSFET
Drivers
Hot Swap
and
Power-over-Ethernet
Non-Isolated
Plug-in
Module
POLA
System Voltage
DC/DC
Controller
48V
Isolated
Plug-in
Module
48V or 24V
DC Input
Hard Drive
DC/DC
Converter
Low
Dropout
Regulator
Supply
Voltage
Supervisor
Memory
System Power Solutions for Industrial Applications

Device
Description
DC/DC Controllers
TPS40057
TPS40061
TPS40100
TPS40200
TPS43000
UC3572
Wide Input (8V-40V) Up to 1MHz Frequency Synchronous Buck Controller, Source/Sink with Prebias
Wide Input (10V-55V) Up to 1MHz Frequency Synchronous Buck Controller, Source/Sink
Midrange Input (4.5V-18V) Synchronous Buck Controller with Advanced Sequencing and Output Margining
8-Pin SO, 4.5-52V Cost Optimized Buck
Multi-Topology (Buck, Boost, Sepic) High Frequency DC/DC Controller
Negative Output Flyback Pulse Width Modulator
DC/DC Converters
TPS54110
TPS54310
TPS54350
TPS54610
3V to 6V Input, 1.5A Output Synchronous-Buck PWM Switcher

3V to 6V Input, 3A Output Synchronous-Buck PWM Switcher with Integrated FETs
4.5V to 20V Input, 3A Output Synchronous-Buck PWM Switcher with Integrated FET
3V to 6V Input, 6A Output Synchronous-Buck PWM Switcher with Integrated FETs
PWM Controllers
UCC38C42
UCC3809
UCC3813
BiCMOS Low-Power Current Mode PWM Controller

Economy Primary Side Controller
Low Power Economy BiCMOS Current Mode PWM
MOSFET Drivers
UCC27323
UCC27423
Dual 4A Peak, High-Speed Low-Side Power MOSFET Drivers

Dual 4A, High-Speed Low-Side MOSFET Drivers with Enable
Hot Swap Controllers

TPS2490/1
TPS2393
TPS2391
+9V to +80V Positive High-Voltage Power-Limiting Hot Swap Controller

Full Featured 48V Hot Swap Power Manager
Simple 48V Hot Swap Controller
Power-over-Ethernet (PoE)
TPS2375
TPS23750
TPS2384
IEEE 802.3af PoE Powered Device Controllers

IEEE 802.3af PD Controller with Integrated DC/DC
Quad Ethernet Power Sourcing Equipment Power Manager
47
How to Power Your Industrial Application
(5) Not Sure Which Architecture Will Fit?
TI offers extensive online information on powering industrial designs.
The Power Supply Topology poster, available at:

http://focus.ti.com/lit/ml/sluw001a/sluw001a.pdf, provides typical
power supply devices for each topology. The Power Management
Applications Solutions brochure, available at:
http://focus.ti.com/lit/ml/slub007/slub007.pdf, lists relevant
application notes.
(1) Controllers for Typical Industrial Power Supplies

The TPS40054/55/57 and TPS40060/61 are families of synchronous
buck controllers with input voltage ranges of 8V to 40V and 10V to 55V,
respectively. Learn more about these products at:
www.ti.com/sc/device/tps40054
(2) Controllers for Economic Power Supply Design
The TPS40200 offer an industrial input voltage range from 4.5V to 52V.
Their flexible PWM control architecture allows cost-optimized power
supplies for a variety of industrial control solutions. More details at:
www.ti.com/sc/device/tps40200
(3) Select an Appropriate Device Using TIs PQS Tool
Visit power.ti.com, click on the Power Quick Search tool and enter
the desired input and output voltage(s). This tool provides recommendations
from our many product portfolios, including DC/DC controllers, DC/DC
converters, low-dropout linear regulators, PWM controllers and
complete module solutions.
(6) Power Management Selection Guide

This guide provides an overview of TIs
extensive power supply product portfolio.
You can download the guide at:
http://power.ti.com/selectionguide
(7) Powering Xilinx and Altera FPGAs
(4) Reference Design Resources

Our reference design home page features solutions including schematics
and detailed bills of materials. Go to power.ti.com, select Design
Resources and then Reference Designs.
TI offers a variety of ready-to-use solutions to

power core and I/O voltages for Altera and
Xilinx FPGAs. Web pages for Altera
(www.ti.com/alterafpga) and Xilinx
(www.ti.com/xilinxfpga) feature
Power Management Reference Guides,
along with downloadable schematics and
bills of material for each design.
48
Selection Tables
Amplifiers
Difference Amplifiers Selection Guide
Device
Gain
Offset
(V)
(max)
Offset
Drift CMRR
(V/C) (dB)
(max) (min)
1
1, 2
1, 2
1, 2
1, 2
1
1
1
0.2
1
1
10, 0.1
1-1000
1
1
2, 0.5
500
250
450
250
1000
750
750
500
1.5 (typ)
5
5
3
103
5
20
20
I2
I2
1, 2
1, 2
1
2, 0.5
1000
1000
I2
I2
I2
1
1
1
1
0.1-100
1
EI2
EI2
EI2
EI2
EI2
I2
1
1
1
1
1
1
200A/V
1-100
200A/V
1-100
100V/V
1-100
Spec
Temp
Range
Ch.
High-Speed, Single Supply

Micropower, High-Precision
High-Precision, Fast
High-Precision, G = 10 or 0.01
Resistor Programmable Gain
Micropower, High-Precision
High-Speed, Precision, G = 1
High-Speed, G = 2 or 0.5
EI2
I2
I2
I2
I2
I2
I2
I2
Low Distortion: 0.0005%

Low Distortion, G = 0.5 or 2
Description
BW
(MHz)
(typ)
Output Voltage
Swing (V) (min)
Power
Supply
(V)
IQ
(mA)
(max)
Package(s)
Price1
86
76
80
86
76
86
80
86
1.5
0.3
1.5
0.15
0.5
0.7
3.1
4
(V+) 0.1 to (V) +0.048

(V+) 1 to (V) + 0.5
(V+) 1.5 to (V) + 1
(V+) 1 to (V) + 0.5
(V+) 1 to (V) + 0.5
(V+) 0.2 to (V) + 0.2
(V+) 2 to (V) + 2
(V+) 2 to (V) + 2
1.8 to 5.5
+2.7 to +36
2.25 to 18
2.25 to 18
1.35 to 18
+2.7 to +20
4 to 18
4 to 18
1.4
0.185
1.2
1.2
0.7
0.65
2.9
2.9
MSOP-8
DIP, SO
SOIC-8/-14
SOIC-8/-14
SOIC-8
MSOP-8
SOIC-8
SOIC-8
$1.60
$1.05
$1.05
$1.05
$1.50
$1.20
$1.05
$1.05
23
23
74
74
3.1
4
(V+) 2 to (V) + 2
(V+) 2 to (V) + 2
4 to 18
4 to 18
2.9
SOIC-8/-14
SOIC-8/-14
$1.05
$1.05
1000
5000
5000
20
1003
1003
86
70
70
0.2
0.55
0.1
(V+) 5 to (V) + 5
(V+) 1 to (V) + 0.1 5
(V+) 1 to (V) + 0.2 5
5 to 18
1.35 to 18
1.35 to 18
0.7
0.3
SOIC-8
SOIC-8
SOIC-8
$2.70
$1.70
$2.10
1000
1000
1000
1000
2000
1000
13
1
13
1
1
1
100
100
100
100
100
100
0.8
4.4
0.8
4.4
0.4
0.4
0 to (V+) 0.8
0 to (V+) 0.9
0 to (V+) 0.8
0 to (V+) 0.9
0.4 (V+) 0.1
0 to (V+) 0.9
+2.7 to 36
+2.7 to 40
+2.7 to 60
+2.7 to 60
+2.7 to 13.5
+2.7 to 60
0.045
0.125
0.045
0.125
0.9
0.125
SOT23-5
SOT23-5
SOT23-5
SOT23-5
SOT23-5
MSOP-8
$0.99
$0.99
$1.25
$1.25
$0.80
$1.25
General Purpose
INA159
INA132
INA133
INA143
INA145
INA152
INA154
INA157
Audio
INA134
INA137
High Common-Mode Voltage

INA117
INA146
INA148
200V CM Range
100V CM Range, Prog. Gain
200V CM Range, 1M Input
High-Side Current Shunt Monitors

INA138
INA139
INA168
INA169
INA19x
INA170
36V (max)
High-Speed, 40V (max)
60V (max)
High-Speed, 60V (max)
16V to 36V CM Range
High-Side, Bi-Directional
1Suggested resale price in U.S. dollars in quantities of 1,000. 2I = 40C to +85C. EI
= 40C to +125C. 3Denotes single supply.
New products are listed in bold red.
Logarithmic Amplifiers Selection Guide
Device
LOG101
LOG102
LOG104
LOG112
LOG21123
LOG114
1Suggested
Spec2
Temp
Range
C3
C
C3
C3
C3
C3
Input
Current
Scale
Range
Factor
(nA)
(V/decade) (min)
1
0.1
1
1
0.5
0.1
0.5
0.1
0.5
0.1
0.375
0.1
Input
Current
Range
(mA)
(max)
3.5
1
3.5
3.5
3.5
3.5
Conformity
Error
(Initial 5
Decades)
(%)
(max)
0.2
0.3
0.2
0.2
0.2
0.2
Conformity
Error
(Initial 5
Decades)
(%/C)
(typ/temp)
0.0001
0.0002
0.0001
0.00001
0.00001
0.001
Offset
Voltage
(Input
Amplifiers)
(mV)
(max)
1.5
1.5
1.5
1.5
1.5
4
VS
(V)
(min)
4.5
4.5
4.5
4.5
4.5
2.25
VS
(V)
(max)
18
18
18
18
18
5
IQ
Per
Ch.
(mA)
(max)
1.5
2
1.5
1.75
1.75
15
Reference
Type
External
External
External
2.5V Internal
2.5V Internal
2.5V Internal
Auxiliary
Op Amps
1
1
2
resale price in U.S. dollars in quantities of 1,000. 2C = 0C to 70C; C3 = 5C to 75C. 3Dual LOG112.
Package(s)
SO-8
SO-14
SO-8
SO-14
SO-16
QFN-16
Price1
$6.95
$7.25
$6.95
$7.90
$11.35
$8.90
Isolation Amplifiers Selection Guide
Device
ISO120
ISO121
ISO122
ISO124
Description
1500-Vrms Isolation, Buffer
Spec2
Temp
Range
WI
I2
I2
I2
Isolation
Voltage Cont
Peak (DC)
(V)
2121
4950
2121
2121
Isolation
Voltage Pulse/
Test Peak
(V)
2500
5600
2400
2400
Isolation
Mode
Rejection DC
(dB) (typ)
160
160
140
1500
2400
Input
Gain
Offset Voltage
Nonlinearity Drift (V/C)
(%) (max)
(max)
0.01
150
0.01
0.02
200
0.01
SmallSignal
Bandwidth
(kHz) (typ)
60
60
50
50
Package(s)
DIP-24
CERDIP-16
DIP-16, SOIC-28
DIP-16, SOIC-28
Price1
$68.20
$66.35
$9.40
$7.20
DIP-12, SO-12
$7.47
Digital Couplers
ISO150
1Suggested
Dual, Bi-Directional Digital Coupler
resale price in U.S. dollars in quantities of 1,000. 2WI = 55C to +125C; I2 = 25C to +85C; I = 40C to +85C.
Selection Tables
Amplifiers
49
Single-Supply Instrumentation Amplifiers Selection Guide
Device Description
Spec2
Temp
Range
Gain
Non
Linearity
(%)
(max)
Input
Bias
Current
(nA)
(max)
Offset
at
G = 100
(V)
(max)
Offset
Drift
(V/C)
(max)
CMRR
BW
at
at
G = 100 G = 100
(dB)
(kHz)
(min)
(min)
Noise
at
1kHz
(nV/ Hz)
(typ)
Power
Supply
(V)
IQ
per
Amp
(mA)
(max)
Package(s)
Price1
Single-Supply, Low Power IQ < 525A per Instrumentation Amp

INA321
INA2321
INA322
INA2322
INA122
INA332
INA2332
INA126
INA2126
INA118
INA331
INA2331
INA125
RRO, SHDN, Low Offset, Gain Error

Dual INA321
RRO, SHDN, Low Cost
Dual INA322
power, RRO, CM to Ground
RRO, Wide BW, SHDN
Dual INA332
power, < 1V VSAT, Low Cost
Dual INA126
Precision, Low Drift, Low Power4
RRO, Wide BW, SHDN
Dual INA331
Internal Ref, Sleep Mode4
WI
WI
WI
WI
I
WI
WI
I
I
I
WI
WI
I
5 to 10000
5 to 10000
5 to 10000
5 to 10000
5 to 10000
5 to 1000
5 to 1000
5 to 10000
5 to 10000
1 to 10000
5 to 1000
5 to 1000
4 to 10000
0.01
0.01
0.01
0.01
0.012
0.01
0.01
0.012
0.012
0.002
0.01
0.01
0.01
0.01
0.01
0.01
0.01
25
0.01
0.01
25
25
5
0.01
0.01
25
1000
1000
10000
10000
250
10000
10000
250
250
55
500
1000
250
73
73
7
7
3
73
73
3
3
0.7
53
53
2
90
90
60
60
90
60
60
83
83
107
90
80
100
50
50
50
50
5
500
500
9
9
70
2000
2000
4.5
100
100
100
100
60
100
100
35
35
10
46
46
38
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.2 to 36
2.7 to 5.5
2.7 to 5.5
2.7 to 36
2.7 to 36
2.7 to 36
2.7 to 5.5
2.7 to 5.5
2.7 to 36
0.06
0.06
0.06
0.06
0.085
0.1
0.1
0.2
0.2
0.385
0.5
0.5
0.525
MSOP-8
TSSOP-14
MSOP-8
TSSOP-14
SOIC-8
MSOP-8
MSOP-8
SO/MSOP-8
SO/MSOP-16
SOIC-8
MSOP-8
TSSOP-14
SOIC-16
$1.10
$1.75
$0.95
$1.50
$2.10
$0.85
$1.35
$1.05
$1.70
$4.15
$1.10
$1.80
$2.05
$1.10
$0.95
$1.10
$1.75
$0.95
$1.50
$1.10
$1.80
$0.88
$1.35
Single-Supply, Low Input Bias Current IB < 100pA

INA155 Low Offset, RRO, SR = 6.5V/s
INA156 Low Offset, RRO, Low Cost,
SR = 6.5V/s
INA321 RRO, SHDN, Low Offset, Gain Error
INA2321 Dual INA321
INA322 RRO, SHDN, Low Cost
INA2322 Dual INA322
INA331 RRO, Wide BW, SHDN
INA2331 Dual INA331
INA332 RRO, Wide BW, SHDN
INA2332 Dual INA332
WI
WI
10, 50
10, 50
0.015
0.015
0.01
0.01
1000
8000
53
53
86
86
110
110
40
40
2.7 to 5.5
2.7 to 5.5
2.1
2.1
WI
WI
WI
WI
WI
WI
WI
WI
5 to 10000
5 to 10000
5 to 10000
5 to 10000
5 to 1000
5 to 1000
5 to 1000
5 to 1000
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
1000
1000
10000
10000
500
1000
10000
10000
73
73
7
7
53
53
73
73
90
90
60
60
90
80
60
60
50
50
50
50
2000
2000
500
500
100
100
100
100
46
46
100
100
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
0.06
0.06
0.06
0.06
0.5
0.5
0.1
0.1
MSOP-8
SOIC-8,
MSOP-8
MSOP-8
TSSOP-14
MSOP-8
TSSOP-14
MSOP-8
TSSOP-14
MSOP-8
TSSOP-14
0.002
0.01
5
2
55
100
0.7
0.4
107
100
70
1
10
33
2.7 to 36
2.7 to 5.5
0.385
3.4
SOIC-8
MSOP-8
$4.15
$1.80
0.01
100
0.4
100
33
2.7 to 5.5
3.4
MSOP-10
$1.95
0.01
100
0.4
106
33
2.7 to 5.5
3.4
MSOP-8
$1.80
0.01
100
0.4
106
33
2.7 to 5.5
3.4
MSOP-10
$1.95
0.012
0.01
0.012
0.012
IB (nA)
25
25
25
25
2.2 to 36
2.7 to 36
2.7 to 36
2.7 to 36
0.085
0.525
0.2
0.2
SOIC-8
SOIC-16
SO/MSOP-8
SO/MSOP-16
$2.10
$2.05
$1.05
$1.70
2.7 to 5.5
3.6
MSOP-10
$1.55
Single-Supply, Precision VOS < 300A, Low VOS Drift

INA118 Precision, Low Drift, Low Power4
INA326 RRIO, Auto Zero,
CM > Supply, Low Drift
INA327 RRIO, Auto Zero, SHDN,
CM > Supply, Low Drift
INA337 RRIO, Auto Zero, Low Drift,
CM > Supply
INA338 RRIO, Auto Zero, Low Drift,
CM > Supply, SHDN
INA122 power, RRO, CM to Ground
INA125 Internal Ref, Sleep Mode4
INA126 power, < 1V VSAT, Low Cost
INA2126 Dual INA126
I
I
I
EI
EI
I
I
I
I
1 to 10000
0.1 to
10000
0.1 to
10000
0.1 to
10000
0.1 to
10000
5 to 10000
4 to 10000
5 to 10000
5 to 10000
Signal Amplifiers for Temperature Control

INA330 Optimized for Precision 10K
Thermistor Applications
1Suggested
250
3
250
2
250
3
250
3
Temp Error5
3
0.2
0.009C3
90
100
83
83
5
60
4.5
38
9
35
9
35
1/F Noise
1
0.0001
C pp
resale price in U.S. dollars in quantities of 1,000. 2WI = 55C to +125C; I = 40C to +85C; EI = 40C to +125C. 3Typical. 4Internal +40-V input protection. 540C to +85C.
50
Selection Tables
Amplifiers
Dual-Supply Instrumentation Amplifiers Selection Guide
Device
Description
Spec2
Temp
Range
Gain
Input
Offset
Non
Bias
at
Offset
Linearity Current G = 100 Drift
(%)
(nA)
(V) (V/C)
(max)
(max)
(max) (max)
CMRR
BW Noise
at
at
at
G = 100 G = 100 1kHz
(dB)
(kHz) (nV/ Hz)
(min) (min) (typ)
IQ
per
Amp
(mA)
(max)
Power
Supply
(V)
Package(s)
Price1
Dual-Supply, Low Power IQ < 850A per Instrumentation Amp

INA122
INA1263
INA118
INA121
INA125
INA1283
INA129
INA1413

Precision, Low Drift
Low Bias, Precision
Precision, Low Noise, Low Drift4
Precision, Low Noise, Low Drift
AD620 Second Source4
Precision, Low Noise, Low Drift,
Pin Compatible with AD62124
I
I
I
I
I
I
I
5 to 10000
5 to 10000
1 to 10000
1 to 10000
4 to 10000
1 to 10000
1 to 10000
0.012
0.012
0.002
0.005
0.01
0.002
0.002
25
25
5
0.05
25
5
5
250
250
55
500
250
60
60
3
3
0.7
5
2
0.7
0.7
90
83
107
100
100
120
120
5
9
70
50
4.5
200
200
60
35
10
20
38
8
8
1.3 to 18
1.35 to 18
1.35 to 184
2.25 to 184
1.35 to 18
2.25 to 18
2.25 to +18
0.085 DIP-8, SOIC-8 $2.10

0.2 DIP/SO/MSOP-8 $1.05
0.385
SOIC-8
$4.15
0.525
SO-8
$2.50
0.525
SOIC-16
$2.05
0.8
SOIC-8
$3.05
0.8
SOIC-8
$3.05
10, 100
0.002
50
0.7
110
200
2.25 to +18
0.8
SOIC-8
$3.05
1,10,100,
200, 500
1 to 10000
1 to 10000
1 to 10000
0.01
0.05
280
2.5
106
470
10
6 to 18
4.5
CDIP-16
$7.00
0.005
0.005
0.01
0.05
0.02
0.0001
500
520
5000
5
6
40
100
106
80
50
450
70
20
10
28
2.25 to 184
6 to 18
4.5 to 18
0.525
4.5
1.4
SO-8
SO-16
SO-16
$2.50
$4.20
$4.20
SO-16
SO-16
PDIP-8
SOIC-8
SOIC-8
SOIC-8
SOIC-8
$4.20
$4.20
$3.80
$3.55
$4.15
$3.05
$3.05
Dual-Supply, Low Input Bias Current IB < 100pA

INA110
Fast Settle, Low Noise, Wide BW
INA121
INA111
INA116
Precision
Fast Settle, Low Noise, Wide BW
Ultra Low IB 3 fA (typ), with Buffered
Guard Drive Pins4
I
I
I
Dual-Supply, Precision VOS < 300A, Low VOS Drift

I
I
I
I
I
I
I
1 to 10000
1 to 10000
100
10, 100
1 to 10000
1 to 10000
1 to 10000
0.002
0.002
0.002
0.002
0.002
0.002
0.002
2
2
2
5
5
5
5
50
50
50
50
55
60
60
0.25
0.25
0.25
0.7
0.7
0.7
0.7
110
120
110
110
107
120
120
10
10
70
200
70
200
200
11
11
12
8
10
8
8
2.25 to 18
2.25 to 18
2.25 to 18
2.25 to 184
1.35 to 184
2.25 to 18
2.25 to 18
3
3
3
0.8
0.385
0.8
0.8
INA122
INA125
INA1263
INA101
Precision, Low Drift4

Precision, Low Drift, with Gain Sense Pins4
Low Noise, Low Drift4
Precision, Low Noise, Pin Com. w/AD6212
Precision, Low Drift
Precision, Low Noise, Low Drift4
Precision, Low Noise, Low Drift,
AD620 Second Source4
Low Noise, Wide BW, Gain Sense Pins
I
I
I
C
5 to 10000
4 to 10000
5 to 10000
1 to 10000
0.012
0.01
0.012
0.007
25
25
25
30
250
250
250
259
3
2
3
23
90
100
83
100
5
4.5
9
25000
60
38
35
13
1.3 to 18
1.35 to 18
1.35 to 18
5 to 18
INA110
Fast Settle, Low Noise, Low Bias, Wide BW
1,10,100,
200, 500
0.01
0.05
280
2.5
106
470
10
6 to 18
0.085
SOIC-8
0.525
SOIC-16
0.2
SO/MSOP-8
8.5 T0-100, CDIP-14,
PDIP-14, SO-16
4.5
CDIP-16
1, 100
0.00065
12000
255
1.25
100
800
9 to 25
13
SO-16
$5.00
1 to 10000
0.00065
12000
300
1.25
100
800
4.5 to 18
12
SOIC-14
$2.50
2000
0.005
12000
300
2.55
100
450
1.3
4.5 to 18
12
SO-14 Narrow
$5.95
1 to 10000
0.00065
12000
300
1.25
100
800
1.3
4.5 to 18
12
SO-16
$2.50
INA114
INA115
INA131
INA1413
INA118
INA1283
INA129
$2.10
$2.05
$1.05
$7.90
$7.00
Dual-Supply, Lowest Noise

INA103
INA163
INA166
INA217
Precision, Fast Settle, Low Drift, Audio,

Mic Pre Amp, THD+N = 0.0009%
Precision, Fast Settle, Low Drift,
Audio, Mic Pre Amp, THD+N = 0.002%
Precision, Fast Settle, Low Drift,
Audio, Mic Pre Amp, THD+N = 0.09%
Precision, Low Drift, Audio, Mic Pre Amp,
THD+N = 0.09%, SSM2017 Replacement
1Suggested
resale price in U.S. dollars in quantities of 1,000. 2I = 40C to +85C; C = 0C to 70C. 3Parts also available in dual version. 4Internal +40-V input protection. 5Typical.
Selection Tables
Amplifiers
51
Operational Amplifiers Selection Guide

Device
Description
S, D,
T, Q2
Offset
(mV)
(max)
Drift
(V/C)
(typ)
IB
(pA)
(max)
Noise
1kHz
(nV/ Hz)
GBW
(MHz)
(typ)
SR
(V/s)
(typ)
VIN
Low
(min)
VIN
High
(max)
SOIC
SOIC
QFN
MSOP
S, D, Q
S, D, Q
S, D, Q
S, D, Q
0.075
0.075
0.02
0.1
0.1
0.1
0.1
0.5
10nA
10nA
1nA
25nA
3
3
8
25
33
8
1
0.35
10
2.3
0.8
0.2
(V) +2
(V) +2
(V) +2
(V) 0.1
(V+) 2
(V+) 2
(V+) 2
(V+) 1
SOT23
SOIC
S, D, Q
S, D, Q
1.5
0.25
0.3
0.4
5nA
20nA
51
45
0.22
0.035
0.12
(V)
(V+) (V) +0.03 (V+) 0.07 2.7 to 6.0
0.01 (V) 0.2 (V+) 1 (V) +0.1 (V+) 0.1 2.7 to 36
0.035
0.03
$0.60
$1.15
0.5
2
0.5
3
1
2.5
2
2
2.5
2
10
100
50
100
20
5.6
8
8
45
16
16
8
8
1
1
55
20
20
3.5
2
(V) +4
(V) +2.5
(V) +2.5
(V) +3
(V) +2
7.5
5
4.8
0.27
0.65
$12.25
$0.95
$1.45
$0.60
$1.40
Package
Options
VOUT
Low
VOUT
High
VSUP
IQ / Amp
(mA)
(max) Price1
Bipolar InputLow Offset, Low Drift

OPA228
OPA227
OPA277
OPA234
Very Low Noise, G>5

Very Low Noise Bipolar
Lowest Offset/Drift
Single Supply,
General Purpose
TLV2451 Good Speed/Power
OPA241 Low Power, Single Supply
(V) +2 (V+) 2 2.5 to 18 3.8

(V) +2 (V+) 2 2.5 to 18 3.8
(V) +0.5 (V+) 1.2 2 to 18 0.825
(V) +0.1 (V+) 1
2.7 to 36
0.3
$1.10
$1.65
$0.85
$1.30
FET-InputLow Noise, Wide Bandwidth

OPA627
OPA134
OPA132
OPA137
OPA130
DiFET, Lowest THD+N

0.00008% THD+N, Audio
0.00008% THD+N, Precision
Lost Cost FET, SOT23
Low Power, FET
SOIC
SOIC
SOIC
SOIC
SOIC
S
S, D, Q
S, D, Q
S, D, Q
S, D, Q
(V+) 4
(V+) 2.5
(V+) 2.5
(V+)
(V+) 2
(V) +3.5
(V) +0.5
(V) +0.5
(V) +0.5
(V) +1.2
(V+) 3.5
(V+) 0.5
(V+) 0.5
(V+) 1.2
(V+) 1.5
4.5 to 18
2.5 to 18
2.5 to 18
2.5 to 18
2.5 to 18
CMOSLow Input Bias Current (IB), Rail-to-Rail In and Out

OPA355 High-Speed, RRO
OPA365 Outstanding ADC Driver
Low THD+N
OPA350 Excellent ADC
Driver Amp, Low Offset
OPA725/6 Low-Noise, High-Speed
OPA727 e-trimTM, Low Offset,Drift
TLC081 Low Cost, Shutdown
TLV2781 1.8V, 8MHz, Shutdown
OPA743 12V, RRIO, SOT23
OPA364 1.8V, High CMRR,
Low Offset
OPA340 Low Offset,
Excellent Swing
TLC2272 Dual or Quad, RRIO
TLC220x SS, Low Noise
OPA348 Lowest Power 1MHz Amp
OPA703/4 RRIO, SOT23/G>5
TLV2761 1.8V power
OPA347 High Speed/Power,
Dual in WCSP
TLC2252 Dual or Quad, RRO,
Low Power
OPA336 power, Low Offset
OPA379 power, Low Noise
OPA349 Excellent Speed,
Power, 1.8V
TLV2401 Ultra-Low Power
SOT23
SOT23
S, D, T
S, D, Q
9
0.5
7
4
50
10
5.8
5
200
50
300
25
(V) 0.2 (V+) 1 (V) 0.1 (V+) 1.5 2.5 to 5.5

(V) 0.2 (V+) +0.2 (V) +0.01 (V+) 0.01 2.2 to 5.5
11
5
$1.90
MSOP
S, D, Q
0.5
10
38
22
(V) 0.1 (V+) +0.1 (V) +0.05 (V+) 0.05 2.5 to 5.5
7.5
$1.30
SOT23
QFN
MSOP
SOT23
SOT23
SOT23
S,D
S
S, D, Q
S, D, Q
S, D, Q
S, D, Q
3
0.15
1.9
3
1.5
0.5
4
0.3
1.2
8
8
2
200
100
50
15
10
10
15
6
8.5
18
30
17
20
20
10
8
7
7
30
30
16
4.3
10
5
(V)
(V)
(V)
(V) 0.2
(V) 0.1
(V) 0.1
4 to 12
4 to 12
4.5 to 16
1.8 to 3.6
3.5 to 12
1.8 to 5.5
6.2
4.3
2.5
0.82
1.5
0.75
$0.90
$1.45
$0.50
$0.65
$0.95
$0.60
SOT23
S, D, Q
0.5
2.5
10
25
5.5
(V) 0.3 (V+) +0.3 (V) +0.005 (V+) 0.005 2.5 to 5.5
0.95
$0.80
TSSOP
SOIC
SC-70
SOT23
SOT23
WCSP,
SC-70
TSSOP
D, Q
S, D
S, D, Q
S, D, Q
S, D, Q
S, D, Q
0.95
0.2
5
0.75
3.5
6
2
0.5
2
4
9
2
60
10
10
10
15
10
9
8
35
45
95
60
2.18
1.8
1
1
0.5
0.35
3.6
2.5
0.5
0.6
0.2
0.17
(V)
(V)
(V) 0.2
(V) 0.3
(V) 0.2
(V) 0.2
1.5
1.5
0.065
0.2
0.028
0.034
$0.65
$1.75
$0.45
$1.30
$0.65
$0.48
D, Q
1.5
0.5
60
19
0.2
0.12
(V)
4.4 to 16
0.07
$0.65
SOT23
SC-70
SC-70
S, D, Q
S, D, Q
S, D, Q
0.125
1.5
10
1.5
2
15
10
25
10
40
80
300
0.1
0.09
0.07
0.03 (V) 0.2 (V+) 1 (V) +0.1 (V+) 0.1 2.3 to 5.5
0.015 (V) 0.2 (V+) +0.2 (V) +0.01 (V+) 0.01 1.8 to 5.5
0.02 (V) 0.2 (V+) +0.2 (V) +0.3 (V+) 0.3 1.8 to 5.5
0.032
0.005
0.002
$0.40
$0.75
SOT23
S, D, Q
1.2
300
500
0.005
0.002 (V) 0.1 (V+) +0.2 (V) +0.15 (V+) 0.05
2.5 to 16
0.95A
$0.80
50
50
500
200
200
50
5.8
10
12
1.4Vp-p
150
1Vp-p
90
18
4.7
2
1.6
0.35
80
(V) (V+) 1.8
12
(V) (V+) 1.8
2.5
(V) (V+) 2.3
1.6 (V) 0.1 (V+) 1.5
1.5 (V) 0.1 (V+) 1.5
0.05 (V) 0.1 (V+) +0.1
2.7 to 5.5
2.7 to 5.5
4.0 to 6.0
2.7 to 5.5
2.7 to 12
1.8 to 5.5
9.5
1
1.5
0.3
0.75
0.02
$1.95
$1.45
$1.35
$1.00
$1.25
(V+) 2.5
(V+) 2.5
(V+) 1.5
(V+) +0.2
(V+) +0.1
(V+) +0.1
(V+) 1.5
(V+) 2.3
(V+) +0.2
(V+) +12.3
(V+) +0.2
(V+) +0.2
(V) +0.1 (V+) 0.1

(V) +0.1 (V+) 0.1
(V) +0.25 (V+) 0.9
(V) +0.07 (V+) 0.02
(V) +0.075 (V+) 0.075
(V) +0.02 (V+) 0.02
(V) +0.15 (V+) 0.01 4.4 to 16

(V) +0.05 (V+) 0.3 4.6 to 16
(V) +0.018 (V+) 0.018 2.5 to 5.5
(V) +0.045 (V+) 0.05 4 to 12
(V) +0.01 (V+) 0.01 1.8 to 3.6
(V) +0.005 (V+) 0.005 2.3 to 5.5
(V+) 1 (V) +0.15 (V+) 0.1
Auto-Zero AutocalibrationHighest Precision, Lowest Drift

OPA380
OPA381
TLC450x
OPA335
OPA734/5
OPA333
High Speed Trans. Amp

Low Power Precision TIA
SS, Auto Cal
5V Auto-Zero
12V Auto-Zero
power Auto-Zero
1Suggested
2S
MSOP
QFN
SOIC
SOT23
SOT23
SC-70
S,D
S
S, D
S, D
S,D
S, D

= single; D = dual; T = triple; Q = quad.
0.025
0.025
0.08
0.005
0.005
0.01
0.1
0.1
1
0.02
0.05
0.05
(V)
(V+) 0.4
(V)
(V+) 0.4
(V) +0.1 (V+) 0.1
(V) +0.015 (V+) 0.015
(V) +0.02 (V+) 0.02
(V) +0.01 (V+) 0.01
New products are listed in bold red. Preview products are listed in bold blue.
52
Selection Tables
Amplifiers
Comparators Selection Guide

Device
Description
Ch.
Output
tRESP
IQ Per Ch.
Current
Low-to(mA), (max) (mA) (min) High (s)
VS
(V)
(min)
VS
(V) VOS (25C)
(max) (mV) (max)
Output type
Package(s)
Price1
High Speed
TLV3501
TL714
TL3016
TL3116
TL712
Ultra High-Speed, Rail-Rail

1, 2
High-Speed, 10mV (typ) Hysteresis 1
High-Speed, Low Offset
1
Ultra Fast, Low Power, Precision 1
Single, High-Speed
1
5
12
12.5
14.7
20
16
16
0.0045
0.006
0.0078
0.0099
0.025
2.7
4.75
5
5
4.75
5.5
5.25
10
10
5.25
6.5
10
3
3
5
Push-Pull
Push-Pull
Open-Drain/Collector
Open-Drain/Collector
Push-Pull
SOT23, SOIC
PDIP, SOIC
SOIC, TSSOP
SOIC, TSSOP
PDIP, SOIC, SOP
$1.50
$2.16
$0.95
$0.95
$0.83
0.0008
0.0012
36
<0.1
2.5
1.8
16
5.5
5
15
Push-Pull
Push-Pull
MSOP, PDIP, SOIC, SOT23, TSSOP

SOT23, SOIC, TSSOP
$0.60
$0.42
0.0017
0.0019
55
36
2.5
2.5
16
16
5
5
Open Drain/Collector
Push-Pull
MSOP, PDIP, SOIC, TSSOP

MSOP, PDIP, SOIC, TSSOP
$0.90
$0.90
Low Power IQ <0.5mA

TLV370x Nanopower, Push-Pull, RRIO
TLV349x Low Voltage, Speed/Power
1, 2, 4
1, 2
Combination Comparators and Op Amps

TLV230x Sub-power, RRIO
TLV270x Sub-power, RRIO
2
2, 4
Comparator with On-Chip Voltage Reference

TLV3011 power Open-Drain
with Built-in 1.242V Ref
TLV3012 power Push-Pull
with Built-in 1.242V Ref
1Suggested
0.003
1.8
5.5
15
Open Drain/Collector
SC70, SOT23
$0.75
0.005
0.5
1.8
5.5
12
Push-Pull
SC70, SOT23
$0.75
High-Speed Amplifiers Selection Guide
Device
Ch.
SHDN
Supply
Voltage
(V)
ACL
(min)
BW
at ACL
(MHz)
(typ)
BW
GBW
G = +2 Product
(MHz) (MHz)
(typ)
(typ)
Slew
Rate
(V/s)
Settling
THD
Time
2Vpp
0.1% G = 1.1MHz
(ns) (typ) (dB) (typ)
Differential
VN
VOS
Gain Phase (nV/ Hz) (mV)
(%)
()
(typ)
(max)
Package(s)
Price1
SOIC, MSOP PowerPADTM

SOIC, MSOP PowerPAD,
Leadless MSOP PowerPAD
$3.50
$4.70
$4.00
Fully Differential
THS4130/31
THS4150/51
1
1
Y
Y
5, 5, 15
5, 5, 15
1
1
150
150
90
81
90
100
52
650
78
53
97
84
1.3
7.6
2
7
THS4502/03
5, 5
370
175
300
2800
6.3
100
THS4504/05
5, 5
260
110
210
1800
20
100
1
2
4
1
2
3
1
2
1
2
1
Y
Y
Y
Y
Y
Y
2.5 to 5.5
2.5 to 5.5
2.5 to 5.5
2.5 to 5.5
2.5 to 5.5
2.5 to 5.5
2.5 to 5.5
2.5 to 5.5
2.5 to 5.5
2.5 to 5.5
2.7 to 3.3
1
1
1
1
1
1
1
1
1
1
1
250
250
250
450
450
450
450
450
250
250
75
90
90
90
100
100
100
100
100
90
90
100
100
100
200
200
200
200
200
100
100
80
150
150
150
300
300
300
300
300
150
150
55
30
30
30
30
30
30
30
30
30
30
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.3
0.09
0.09
0.09
0.05
0.05
0.05
0.05
0.05
0.09
0.09
0.7
6.5
6.5
6.5
5.8
5.8
5.8
5.8
5.8
6.5
6.5
5.8
8
8
8
9
9
9
9
9
8
8
6
SOT23, SOIC PowerPAD

SOIC PowerPAD, MSOP
SOIC, TSSOP
SOT23, SOIC
MSOP
SOIC
SOT23, SOIC
SOIC, MSOP
SOT23, SOIC PowerPAD
MSOP
SC-70
$0.75
$1.20
$1.80
$0.90
$1.50
$1.90
$0.90
$1.50
$0.75
$1.20
$0.45
1
1
1
5
5
5, 5, 15
1
7
1
500
350
150
200
300
90
230
1600
90
290
700
52
10
78
80
80
97
0.02
0.05
7
4.8
2
1.8
1.8
SOT23, SOIC
SOT23, SOIC
SOIC, MSOP PowerPAD
$3.35
$3.80
$3.50
$1.75
CMOS Amplifiers
OPA354
OPA2354
OPA4354
OPA355
OPA2355
OPA3355
OPA356
OPA2356
OPA357
OPA2357
OPA358
FET-Input
OPA656
OPA657
THS4131
1Suggested
Selection Tables
53
Amplifiers
High-Speed Amplifiers Selection Guide (Continued)
Device
Ch.
SHDN
Supply
Voltage
(V)
ACL
(min)
BW
at ACL
(MHz)
(typ)
BW
GBW
G = +2 Product
(MHz) (MHz)
(typ)
(typ)
5, 5
5
5
5
5
5, 5
5, 15
5, 15
5, 15
5, 15
5, 5, 15
1
1
3
7
12
1
2
1
1
1
1
800
400
500
500
600
230
100
290
70
175
1400
240
56
65
110
100
50
38
390
280
200
800
1750
3900
125
200
100
100
400
240
400
1000
625
950
70
100
310
240
230
1000
18
15
7.5
15
20
40
60
37
60
43
25
84
94
72
80
82
64
110
0.01
0.003
0.001
0.02
0.015
0.006
0.01
0.01
0.007
0.03
0.008
0.012
0.02
0.025
0.01
0.01
0.05
0.004
0.75
2.7
2
1.2
0.85
1
1.6
6
10
7
3
Slew
Rate
(V/s)
Settling
THD
Time
2Vpp
0.1% G = 1.1MHz
(ns) (typ) (dB) (typ)
Differential
VN
VOS
Gain Phase (nV/ Hz) (mV)
(%)
()
(typ)
(max)
Package(s)
Price1
1
1.2
1.2
0.5
0.5
1
2
6
10
4.5
10
SOP,SOIC
SOT23, SO
SOT23, SO
SOT23, SOIC
SOT23, SOIC
SOIC
SOIC, MSOP PowerPADTM
SOIC, MSOP PowerPAD
SOIC, MSOP PowerPAD
SOIC, MSOP PowerPAD
SOIC, MSOP PowerPAD
$0.90
$1.55
$1.60
$1.70
$2.00
$1.55
$2.00
$2.30
$1.10
$1.80
$2.85
Voltage Feedback
OPA820
OPA842
OPA843
OPA846
OPA847
OPA2613
THS4031/32
THS4011/12
THS4051/52
THS4081/82
THS4271
1, 2, 4
1
1
1, 2
1
2
1, 2
1, 2
1, 2
1, 2
1
N
N
N
Y
Voltage-Limiting Amplifiers
OPA698
OPA699
1
1
N
N
5, 5
5, 5
1
4
450
260
215
250
1000
1100
1400
93
0.012
0.012
0.008
0.008
5.6
4.1
5
5
SOIC
SOIC
$2.00
$2.05
Y
Y
Y
Y
N
Y
Y
N
5, 5
5, 5
5, 5
5, 5
5
5, 15
5, 15
5, 15
1
1
1
1
1
1
1
1
280
1700
210
200
1500
235
100
130
255
1400
160
150
690
210
90
2100
4300
820
540
1700
5000
1300
1500
13
42
27
11
93
86
77
84
72
78
53
0.07
0.04
0.04
0.06
0.03
0.013
0.01
0.007
0.02
0.007
0.02
0.03
0.015
0.02
0.03
0.018
1.7
3
3.7
4.4
4.1
2
6
2
2.5
3
0.35
3.5
3
3
8
8
SOT23, SOIC
SOT23, SOIC
SOT23, SOIC
SOT23, SOIC
SOT23, SOIC
SOIC, SOIC PowerPAD
SOIC, MSOP PowerPAD
SOIC, MSOP PowerPAD
$1.55
$1.35
$1.35
$1.20
$1.25
$3.60
$1.85
$2.25
Current Feedback
OPA691
1, 2, 3
OPA695
1
OPA684
1, 2, 3, 4
OPA683
1, 2
OPA694
1
THS3091/95 1, 2
THS3110/12 1, 2
THS3120/22 1, 2
1Suggested
High-Speed Buffer Amplifiers Selection Guide
Device
BUF162
BUF634
OPA633
1Suggested
Spec2
Temp
Range
I
I
VS 15
(V)
N
Yes
VS 5
(V)
5
Yes
Yes
Yes
VS +5
(V)
Yes
Yes
ACL Min
Stable
Gain
(V/V)
1
1
BW
at ACL
(MHz)
1600
180
Slew
Rate
(V/s)
9000
2000
Settling
Time
0.01%
(ns) (typ)
200
IQ
(mA)
(typ)
5.8
250
THD
(FC =
1MHz)
(dB) (typ)
80
Diff
Gain
(%)
0.06
0.4
Diff
Phase
()
0.02
0.1
260
2500
50
100
0.1
resale price in U.S. dollars in quantities of 1,000. 2I = 40C to +85C; C = 0C to 70C.
VOS
(mV)
max
30
100
IB
(A)
max
7
20
15
35
Package(s)
SOIC, MSOP, PowerPAD
DIP, SOIC, TO220-5,
DDPak-5
DIP
Price1
$1.60
$3.05
$5.45
For a complete product listing visit amplifier.ti.com
PWM Power Drivers Selection Guide

Device
Temp
Range2
Output
Current
(A) (min)
Saturation
Voltage
(V) (max)
IQ
(mA) (max)
VS
(V) (min)
VS
(V) (max)
Duty Cycle
(%) (min)
Duty Cycle
(%) (max)
Package(s)
Price1
I
WI
I
I
1.9
2
3
1.2
1
2.2
0.6
0.65
5
9
0.8
1
9
8
8
8
60
60
32
32
10
10
10
10
90
90
90
90
TO-220, DDPAK
TO-220, DDPAK
SO-8, SO-8 PowerPAD
14-lead PowerPAD
$3.85
$3.85
$1.60
$1.60
Single Switch
DRV101
DRV102
DRV103
DRV104
1Suggested
resale price in U.S. dollars in quantities of 1,000. 2I = 40C to +85C; WI = 55C to +125C.
54
Selection Tables
Amplifiers
Power Operational Amplifiers Selection Guide

Device
OPA445/B
OPA452
OPA453
OPA541
OPA544
OPA2544
OPA547
OPA548
OPA549
OPA551
OPA552
OPA561
OPA569
TLV411x
1Suggested
Spec2
Temp Range
I2
EI
EI
I2
I
I
I
I
I
EI
EI
EI
I
EI
IOUT
(A)
0.015
0.05
0.05
10
2
2
0.5
3
8
0.2
0.2
1.2
2
0.3
VS
(V)
10 to 40
20 to 80
20 to 80
10 to 40
20 to 70
20 to 70
8 to 60
8 to 60
8 to 60
8 to 60
8 to 60
7 to 16
2.7 to 5.5
2.5 to 6
Bandwidth
(MHz)
2
1.8
7.5
Full Power 55kHz
1.4
1.4
1
1
0.9
3
12
17
1.2
2.7
Slew Rate
IQ
(V/s)
(mA) (max)
15
4.7
7.2
5.5
23
5.5
10
20
8
12
8
12
6
10
10
17
9
26
15
7
24
7
50
50
1.2
6
1.6
1
VOS
(mV) (max)
5-3
3
3
1
5
5
5
10
5
3
3
20
2
3.5
VO Drift
(V/C) (max)
10
5
5
30
10
10
25
30
20
7
7
50
1.3 (typ)
3
IB
(nA) (max)
0.05
0.1
0.1
0.05
0.1
0.1
500
500
500
0.1
0.1
0.1
10A
0.05
Package(s)
TO-99, DIP-8, SO-8
TO220-7, DDPak-7
TO220-7, DDPak-7
TO-3, ZIP
TO220-5, DDPak-5
ZIP11
TO220-7, DDPak-7
TO220-7, DDPak-7
ZIP11
DIP-8, SO-8, DDPak-7
DIP-8, SO-8, DDPak-7
HTSSOP-20
SO-20 PowerPADTM
PDIP, MSOP, SOIC
Price1
$4.75
$2.55
$2.55
$11.10
$6.88
$12.00
$4.35
$6.00
$12.00
$2.40
$1.75
$2.65
$3.10
$0.75
resale price in U.S. dollars in quantities of 1,000. 2I2 = 25C to +85C; I = 40C to +85C; EI = 40C to +125C.
Digital Temperature Sensors Selection Guide

Device
TMP100
TMP101
TMP175
TMP75
TMP121
TMP122
TMP123
TMP124
TMP125
TMP141
TMP300
Supply
Voltage
(V)
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
2.7 to 5.5
1.8 to 18
TMP301
1.8 to 18
1Suggested
Interface
2-Wire
2-Wire
2-Wire
2-Wire
SPI
SPI
SPI
SPI
SPI
SensorPath
Analog and
Comparator Outputs
Comparator Output
25 to 85C
Accuracy
(C max)2
2
2
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2
2
Quiescent
Current
(A) max
45
45
50
50
50
50
50
50
50
170
100
Resolution
(Bits)
9 to 12
9 to 12
12
12
12
9 to 12
12
12
10
10
50
Programmable
Temp Alert
Resistor Prog. with

5C/10C Hysteresis
Resistor Prog. with
5C/10C Hysteresis
resale price in U.S. dollars in quantities of 1,000. 2All digital temp sensors have a 0.5C typical accuracy.
Max Operating
Temp
(C)
150
150
127
127
150
150
150
150
125
127
150
Package
SOT23
SOT23
SO-8
SO-8
SOT23
SOT23
SOT23
SO-8
SOT23-6
SOT23
SC-70
Price1
$0.75
$0.80
$0.85
$0.70
$0.90
$0.99
$0.90
$0.70
$0.80
$0.65
$0.70
150
SC-70
$0.70
Preview products are listed in bold blue.
Selection Tables
55
Amplifiers/Voltage References
4-20mA Transmitters and Receivers Selection Guide
Device
Description
Full-Scale
Input Range
Output
Range
(mA)
Additional
Power
Available
(V at mA)
Package(s)
Price1
11.6 to 40
7.5 to 36
7.5 to 36
7.5 to 36
5mV to 1V
40A to 200A
40A to 200A
40A to 200A
4-20mA
4-20mA
4-20mA
4-20mA
DIP-14, SOIC-16
SOIC-8
SOIC-8
MSOP-8, DFN 8
$8.70
$1.05
$1.05
$0.90
VREF = 10V
13.5 to 40
0V to 5V,
0V to 10V
4-20mA, 0-20mA,
0-25mA
DIP-16, SOIC-16
$7.10
VREF = 10V
40V
4-20mA
0V to 5V
DIP-16
$3.55
Two 800A
Two 250A
Two 100A
7.5 to 36
7.5 to 36
7.5 to 36
5mV to 1V
5mV to 1V
5mV to 1V
4-20mA
4-20mA
4-20mA
5.1 at 1
5.1 at 1
5.1 at 1
DIP-14, SOIC-14
SOIC-14
SOIC-14
$4.00
$4.00
$4.00
5V and 2.5V
7.5 to 36
5mV to 1V
4-20mA
5.1 at 1
DIP-14, SOIC-14
$4.00
5mV to 320mV
4-20mA
5.1 at 2.1
SSOP-24
$3.35
0.1V to
4.9V
at VS=+5V
17.5V, 20mA
TSSOP-16
$3.40
5 x 5 QFN
Sensor
Excitation
Loop
Voltage
(V)
Two 1mA
VREF = 2.5V
VREF = 4.096V
VREF = 5.0V
2-Wire General Purpose

XTR101
XTR115
XTR116
XTR117
IA with Current Excitation

IIN to IOUT Converter, External Resistor Scales VIN to IIN
3-Wire General Purpose

XTR110
Selectable Input/Output Ranges
4-20mA Current Loop Receiver

RCV420
4-20mA Input, 0V to 5V Output
2-Wire RTD Conditioner with Linearization

XTR105
XTR112
XTR114
100 RTD Conditioner

High-Resistance RTD Conditioner
High-Resistance RTD Conditioner
2-Wire Bridge Sensor Conditioner with Linearization

XTR106
Bridge Conditioner
2-Wire RTD Conditioner with Digital Calibration for Linearization, Span and Offset
XTR108
100 to 1k RTD Conditioner, 6-Channel Input

Mux, Extra Op Amp Can Convert to Voltage Sensor
Excitation, Calibration Stored in External EEPROM
Two 500A
7.5 to 24
Bridge Conditioner with Digital Calibration for Linearization, Span and Offset Over Temperature
PGA309
Complete Digitally Calibrated Bridge Sensor

Conditioner, Voltage Output, Calibration Stored in
External EEPROM, One-Wire/Two-Wire Interface
Output Driver for Industrial and Process Control Loops
User Selects V or I
XTR300
1Suggested
VEXC = VS,
2.5V, 4.096V
N/A
1mV/V to
245mV/V
17.5V
17V
Voltage References Selection Guide
Device
REF32xx
Description
Precision, power
REF31xx
Precision, power
REF30xx
power, Bandgap
REF02B
Low Drift, Low Noise,

Buried Zener
REF102A Low Drift, Low Noise,
Buried Zener
REF102B Low Drift, Low Noise,
Buried Zener
REF1112 Nanopower 1.25V Shunt
REF102C Ultra-Low Drift, Low
Noise, Buried Zener
Current References
REF200 Dual Current Reference
with Current Mirror
1Suggested
Initial
Accuracy
(%) max
0.2
Drift
(ppm/C)
max
7
Long-Term
Stability
(ppm/1000hr)
(typ)
55
Noise
0.1 to 10Hz
(Vp-p)
(typ)
17 to 53
IQ
max
(mA)
0.12
Temperature
Range
(C)
40 to +125
Output
Current
(mA)
10
Package(s)
SOT23-6
Price1
$1.70
0.2
15
24
15 to 30
0.1
40 to +125
10
SOT23-3
$1.10
0.2
50
24
20 to 45
0.05
40 to +125
25
SOT23-3
$0.60
0.13
10
50
1.4
25 to +85
+21, 0.5
PDIP-8, SOIC-8
$2.65
10
0.1
10
20
1.4
25 to +85
+10, 5
PDIP-8, SOIC-8
$1.75
10
0.05
20
1.4
25 to +85
+10, 5
PDIP-8, SOIC-8
$4.40
1.25
10
0.2
0.025
30
2.5
60
20
25
5
0.0012
1.4
40 to +125
25 to +85
1A to 5mA
+10, 5
SOT-23
PDIP-8, SOIC-8
$0.85
$5.10
Two 100A
1A
25 (typ)
1Ap-p
25 to +85
50A to
400A3
PDIP-8, SOIC-8
$2.60
Output (V)
1.25, 2.048, 2.5
3.0, 3.3, 4.096
1.25, 2.048, 2.5
3.0, 3.3, 4.096
1.25, 2.048, 2.5,
3.0, 3.3, 4.096
5
56
Selection Tables
Data Converters
ADCs Selection Guide

Res.
Device
(Bits)
ADS1258
24
ADS1271
24
ADS1252
24
ADS1255
24
ADS1256
24
ADS1251
24
ADS1253
24
ADS1254
24
ADS1210/11 24
Sample
Rate
(kSPS)
125
105
41
30
30
20
20
20
16
Number of
Input
Channels
16 SE/8 Diff
1 Diff
1 SE/1 Diff
2 SE/1 Diff
8 SE/4 Diff
1 SE/1 Diff
4 SE/4 Diff
4 SE/4 Diff
1/4 SE/1/4 Diff
Interface
Serial, SPI
Serial, SPI
Serial
Serial, SPI
Serial, SPI
Serial
Serial
Serial
Serial, SPI
Input Voltage
(V)
5
2.5
5
PGA (1-64), 5V
PGA (1-64), 5V
5
5
5
PGA (1-16), 5
VREF
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Int/Ext
Linearity
(%)
0.001
0.0015
0.0015
0.001
0.001
0.0015
0.0015
0.0015
0.0015
NMC
(Bits)
24
24
24
24
24
24
24
24
24
Power
(mW)
44
35-100
40
35
35
7.5
7.5
4
27.5
ADS1216
ADS1217
ADS1218
ADS1222
ADS1224
ADS1232
ADS1234
ADS1244
ADS1245
ADS1240
ADS1241
ADS1242
ADS1243
ADS1212/13
24
24
24
24
24
24
24
24
24
24
24
24
24
22
0.78
0.78
0.78
0.24
0.24
0.8
0.8
0.015
0.015
0.015
0.015
0.015
0.015
6.25
8 SE/4 Diff
8 SE/4 Diff
8 SE/4 Diff
2 SE/2 Diff
4 SE/4 Diff
2 SE/2 Diff
4 SE/4 Diff
1 SE/1 Diff
1 SE/1 Diff
4 SE/2 Diff
8 SE/4 Diff
4 SE/2 Diff
8 SE/4 Diff
1/4 SE/1/4 Diff
Serial, SPI
Serial, SPI
Serial, SPI
Serial
Serial
Serial
Serial
Serial
Serial
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
PGA (1-128), 2.5

PGA (1-128), 5
PGA (1-128), 2.5
5
5
PGA (1-128), 2.5
PGA (1-128), 2.5
5
2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-16), 5
Int/Ext
Int/Ext
Int/Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Int/Ext
0.0015
0.0012
0.0015
0.0015
0.0015
0.0015
0.0015
0.0008
0.0015
0.0015
0.0015
0.0015
0.0015
0.0015
24
24
24
24
24
24
24
24
24
24
24
24
24
22
0.6
0.8
0.8
0.5
0.5
3
3
0.3
0.5
0.6
0.5
0.6
0.6
1.4
ADS1250
ADS1100
ADS1110
ADS1112
TLC7135
ADS1000
ADS1010
ADS1012
20
16
16
16
14
12
12
12
25
0.128
0.24
0.24
3
0.128
0.25
0.24
1 SE/1 Diff
1 SE/1 Diff
1 SE/1 Diff
3 SE/2 Diff
1 SE/1 Diff
1 SE/1 Diff
1 SE/1 Diff
3 SE/1 Diff
Serial, SPI
Serial, I2C
Serial, I2C
Serial, I2C
MUX BCD
Serial, I2C
Serial, I2C
Serial, I2C
PGA (1-8), 4
PGA (1-8), VDD
PGA (1-8), 2.048
PGA (1-8), 2.048
VREF
PGA(1-8), VDD
PGA(1-8), 2.048
PGA(1-8), 2.048
Ext
Ext
Int
Int
Ext
Ext
Int
Int
0.003
0.0125
0.01
0.01
0.005
0.0125
0.01
0.01
20
16
16
16
4.5 Dig
12
12
12
75
0.3
0.7
0.7
5
0.3
0.7
0.7
Package(s)
QFN-48
TSSOP-16
SOIC-8
SSOP-20
SSOP-28
SOIC-8
SSOP-16
SSOP-20
PDIP-18/24, SOIC-18/24,
SSOP-28
TQFP-48
TQFP-48
TQFP-48
TSSOP-14
TSSOP-20
TSSOP-24
TSSOP-28
MSOP-10
MSOP-10
SSOP-24
SSOP-28
TSSOP-16
TSSOP-20
PDIP-18/24, SOIC-18/24,
SSOP-28
SOIC-16
SOT23-6
SOT23-6
MSOP-10, SON-10
PDIP-28, SOIC-28
SOT23-6
SOT23-6
MSOP-10, SON-10
Ext
Ext
Ext
Ext
0.025
0.025
0.025
0.025
20
20
20
20
170
80
55
110
SOIC-24
SOIC-28, TQFP-32
QFN-48
QFN-48
Price1
$8.95
$5.90
$5.60
$8.25
$8.95
$5.60
$6.70
$6.70
$10.25/
$10.90
$5.00
$5.00
$5.50
$2.95
$3.25
$3.90
$4.50
$2.95
$3.10
$3.80
$4.20
$3.60
$3.95
$7.70/
$9.00
$6.95
$1.80
$1.95
$2.65
$1.95
$0.99
$1.10
$1.45
$23.00
$12.10
$18.00
$32.00
Delta-Sigma () ADCs for Measuring Low-Level Currents (Photodiodes)

DDC101
DDC112
DDC114
DDC118
1Suggested
20
20
20
20
10
3
3
3
1
2
4
8
Serial
Serial
Serial
Serial
500pC
50-1000pC
12-350pC
12-350pC
Wide Bandwidth Delta-Sigma () ADCs Selection Guide

Device
ADS1271
ADS1625
ADS1626
ADS1610
ADS1605
ADS1606
ADS1602
ADS1601
1Suggested
(Bits)
24
18
18
16
16
16
16
16
Sample
Rate
(kSPS)
105
1.25MSPS
1.25MSPS
10MSPS
5MSPS
5MSPS
2.5MSPS
1.25MSPS
Bandwidth
(kHz)
51
615
615
4900
2450
2450
1230
615
Number of
Input
Channels
1 Diff
1 Diff
1 Diff
1 Diff
1 Diff
1 Diff
1 Diff
1 Diff
Interface
Serial
P18
P18 w/FIFO
P16
P16
P16 w/FIFO
Serial
Serial
Input Voltage
(V)
2.5
3.75
3.75
3
3.75
3.75
3
3
SNR
(dB)
109
93
93
84
88
88
91
92
THD
(dB)
105
103
103
96
101
101
103
105
Power
(mW)
35-100
520
520
1000
570
570
550
350
Package
TSSOP-16
TQFP-64
TQFP-64
TQFP-64
TQFP-64
TQFP-64
TQFP-48
TQFP-48
Price1
$5.90
$37.60
$39.60
$32.05
$33.75
$23.00
$14.00
Selection Tables
57
Data Converters
SAR ADCs Selection Guide

Device
ADS8380
ADS8382
ADS8381
ADS8383
ADS8411
ADS8412
ADS8401
ADS8402
ADS8405
ADS8406
ADS8371
ADS8370
ADS8372
ADS8322
ADS8323
ADS8361
ADS8509
ADS8505
ADS8342
ADS7811
ADS7815
ADS8364
TLC4541
TLC4545
ADS7805
ADS7809
ADS8320
ADS8321
ADS8325
ADS8341
ADS8343
ADS8344
ADS8345
ADS7807
ADS7813
ADS7825
ADS7891
ADS7890
TLC3541
TLC3544
TLC3545
TLC3548
TLC3574
TLC3578
ADS8324
ADS7871
ADS7881
ADS7869
ADS7886
ADS7810
ADS7818
1Suggested
Res.
(Bits)
18
18
18
18
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
14
14
14
14
14
14
14
14
14
14
12
12
12
12
12
Sample
Rate
(kSPS)
600
600
580
500
2000
2000
1250
1250
1250
1250
750
600
600
500
500
500
250
250
250
250
250
250
200
200
100
100
100
100
100
100
100
100
100
40
40
40
3000
1250
200
200
200
200
200
200
50
40
4000
1000
1000
800
500
Number
of Input
Channels
Interface
1 SE, 1 PDiff
Serial, SPI
1 Diff
Serial, SPI
1 SE, 1 PDiff P8/P16/P18
1 SE, 1 PDiff P8/P16/P18
1 SE, 1 PDiff
P8/P16
1 Diff
P8/P16
1 SE, 1 PDiff
P8/P16
1 Diff
P8/P16
1 SE, 1 PDiff
P8/P16
1 Diff
P8/P16
1 SE, 1 PDiff
P8/P16
1 SE, 1 PDiff
Serial, SPI
1 Diff
Serial, SPI
1 PDiff
P8/P16
1 Diff
P8/P16
2 x 2 Diff
Serial, SPI
1 SE
Serial, SPI
1 SE
P16
SE
P8/P16
1 SE
P16
1 SE
P16
1 x 6 Diff
P16
1 SE
Serial, SPI
1 PDiff
Serial, SPI
1 SE
P8/P16
1 SE
Serial, SPI
1 PDiff
Serial, SPI
1 Diff
Serial, SPI
1 PDiff
Serial, SPI
4 SE/2 Diff
Serial, SPI
4 SE/2 Diff
Serial, SPI
8 SE/4 Diff
Serial, SPI
8 SE/4 Diff
Serial, SPI
1 SE
Serial, SPI/P8
1 SE
Serial, SPI
4 SE
Serial, SPI/P8
1 SE
P8/P14
1 SE
Serial, SPI
1 SE
Serial, SPI
4 SE/2 Diff
Serial, SPI
1 Diff
Serial, SPI
8 SE/4 Diff
Serial, SPI
4 SE
Serial, SPI
8 SE
Serial, SPI
1 Diff
Serial, SPI
8 SE/4 Diff
Serial, SPI
1 SE
P8/P12
12 Diff
Serial, SPI/P12
1 SE, 1 PDiff
Serial, SPI
1 SE
P12
1 PDiff
Serial, SPI
Input Voltage
(V)
VREF
VREF (4.2V) at VREF/2
VREF
VREF
VREF
VREF
VREF
VREF
VREF
5
2.5V at 2.5
2.5V at +2.5
+4, 5, 10; 3.3, 5, 10
10
2.5
2.5
2.5
2.5V at +2.5
VREF
VREF
10
+4, 10, 3.3, 5, 10
VREF
VREF at +VREF
VREF
VREF
VREF at VREF
VREF
VREF at VREF
4, 5, 10
+4, 10, 3.3, 5, 10
10
2.5
2.5
VREF
4
VREF
4
10
10
VREF at +VREF
PGA (1, 2, 4, 8, 10, 16, 20)
2.5
2.5 at +2.5
VDD (2.35V to 5.25V)
10
5
VREF
Int/Ext
Int/Ext
Ext
Ext
Int
Int
Int
Int
Int/Ext
Int/Ext
Ext
Int/Ext
Int/Ext
Int/Ext
Int/Ext
Int/Ext
Int/Ext
Int/Ext
Ext
Int/Ext
Int/Ext
Int/Ext
Ext
Ext
Int/Ext
Int/Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Int/Ext
Int/Ext
Int/Ext
Int
Int
Ext
Int/Ext
Ext
Int/Ext
Ext
Ext
Ext
Int
Int
Int/Ext
Ext (VDD)
Int/Ext
Int
Linearity
(%)
0.0015
0.0012
0.0015
0.0026
0.0038
0.0038
0.0053
0.0053
0.003
0.003
0.0023
0.0015
0.0012
0.009
0.009
0.00375
0.003
0.0045
0.006
0.006
0.006
0.0045
0.0038
0.0038
0.0045
0.0045
0.012
0.012
0.006
0.006
0.006
0.006
0.006
0.0022
0.003
0.003
0.009
0.009
0.006
0.006
0.006
0.006
0.006
0.006
0.012
0.03
0.024
0.048
0.036
0.018
0.024
NMC
18
18
16
18
16
16
16
16
16
16
16
16
16
15
15
14
16
16
16
15
15
14
16
16
16
16
15
15
16
15
15
15
15
16
16
16
14
14
14
14
14
14
14
14
14
13
12
11
12
12
12
SINAD
(dB)
91
96
93
85
87
90
85
88
85
90
87
90
94
83
83
83
86
86
85
87
84
82.5
84.5
84.5
86
88
84
84
91
86
86
86
85
88
89
83
78
78
81.5
81
81.5
81
79
79
78
71.5
70
71
70
Power
(mW)
115
115
115
110
155
155
155
155
155
155
130
110
110
85
85
150
70
70
200
200
200
413
17.5
17.5
81.5
81.5
1.95
5.5
2.25
3.6
3.6
3.6
3.6
28
35
50
90
90
17.5
20
17.5
20
29
29
2.5
6
110
175
17.5
225
11
Package(s)
6 X 6 QFN-28
6 X 6 QFN-28
TQFP-48
TQFP-48
TQFP-48
TQFP-48
TQFP-48
TQFP-48
TQFP-48
TQFP-48
TQFP-48
6 X 6 QFN-28
6 X 6 QFN-28
TQFP-32
TQFP-32
SSOP-24
SOIC-20, SSOP-28
SOIC-28, SSOP-28
TQFP-48
SOIC-28
SOIC-28
TQFP-64
SOIC-8, VSSOP-8
SOIC-8, VSSOP-8
PDIP-28, SOIC-28
SOIC-20
VSSOP-8
VSSOP-8
VSSOP-8, QFN-8
SSOP-16
SSOP-16
SSOP-20
SSOP-20
PDIP-28, SOIC-28
PDIP-16, SOIC-16
PDIP-28, SOIC-28
TQFP-48
TQFP-48
SOIC-8, VSSOP-8
SOIC-20, TSSOP-20
SOIC-8, VSSOP-8
SOIC-24, TSSOP-24
SOIC-24, TSSOP-24
SOIC-24, TSSOP-24
VSSOP-8
SSOP-28
TQFP-48
TQFP-100
SOT23-6, SC-70
SOIC-28
PDIP-8, VSSOP-8
Price1
$16.50
$16.95
$16.65
$15.75
$22.00
$23.05
$12.55
$13.15
$14.10
$14.70
$12.00
$12.50
$13.00
$7.10
$7.10
$10.35
$12.95
$12.95
$11.30
$36.15
$21.30
$18.10
$6.85
$6.85
$21.80
$21.80
$5.15
$5.15
$5.90
$7.40
$7.45
$8.00
$8.00
$27.40
$21.30
$29.55
$10.50
$10.50
$5.00
$6.00
$5.00
$6.40
$6.85
$8.65
$4.15
$5.00
$7.35
$14.60
$2.25
$27.80
$2.50
58
Selection Tables
Data Converters
SAR ADCs Selection Guide (Continued)

Device
ADS7834
ADS7835
ADS7852
ADS7861
ADS7862
ADS7864
TLC2551
TLC2552
TLC2554
TLC2555
TLC2558
ADS7800
ADS8508
ADS8504
ADS7866
ADS7816
Res.
(Bits)
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Sample
Rate
(kSPS)
500
500
500
500
500
500
400
400
400
400
400
333
250
250
200
200
Number
of Input
Channels
1 PDiff
1 Diff
8 SE
2 x 2 Diff
2 x 2 Diff
3 x 2 Diff
1 SE
2 SE
4 SE
1 PDiff
8 SE
1 SE
1 SE
1 SE
1 SE/1 PDiff
1 PDiff
Interface
Serial, SPI
Serial, SPI
P12
Serial, SPI
P12
P12
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
P8/P12
Serial, SPI
P8/P16
Serial, SPI
Serial, SPI
Input Voltage
(V)
2.5
2.5
5
2.5 at +2.5
2.5 at +2.5
2.5 at +2.5
VREF
VREF
4
VREF
4
5, 10
+4, 10, 3.3, 5, 10
10
VDD (1.2V to 3.6V)
VREF
VREF
Int
Int
Int/Ext
Int/Ext
Int/Ext
Int/Ext
Ext
Ext
Int/Ext
Ext
Int/Ext
Int
Int/Ext
Int/Ext
Ext
Ext
Linearity
(%)
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.012
0.011
0.011
0.024
0.024
NMC
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
SINAD
(dB)
70
72
72
70
71
71
72
72
71
72
71
72
73
72
70
72
Power
(mW)
11
17.5
13
25
25
52.5
15
15
9.5
15
9.5
135
70
70
0.25
1.9
ADS7817
ADS7841
ADS7842
ADS7844
TLC2574
TLC2578
TLV2541
TLV2542
TLV2544
TLV2545
TLV2548
TLV2553
TLV2556
ADS7829
AMC7823
AMC7820
ADS7804
ADS7808
ADS7822
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
200
200
200
200
200
200
200
200
200
200
200
200
200
125
200
100
100
100
75
1 Diff
4 SE/2 Diff
4 SE
8 SE/4 Diff
4 SE
8 SE
1 SE
2 SE
4 SE
1 PDiff
8 SE
11 SE
11 SE
1 PDiff
8 SE I/O DAS
8 DAS
1 SE
1 SE
1 PDiff
Serial, SPI
Serial, SPI
P12
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
P8/P16
Serial, SPI
Serial, SPI
VREF at +VREF
VREF, VREF at VREF
VREF
VREF, VREF at VREF
10
10
VREF
VREF
+2, 4
+5.5 (VREF = VDD)
+2, 4
VREF
VREF
VREF
5
5
10
+4, 10 , 3.3, 5, 10
VREF
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Int/Ext
Ext
Int/Ext
Ext
Int/Ext
Ext
Int/Ext
Int
Int/Ext
Int/Ext
Ext
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.018
0.024
0.024
0.011
0.011
0.018
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
71
72
72
72
79
79
72
72
70
72
70
71
74
72 (typ)
72
73
71
2.3
0.84
0.84
0.84
29
29
2.8
2.8
3.3
2.8
3.3
2.43
2.43
0.6
100
40
81.5
81.5
0.6
TLC2543
12
66
11 SE
Serial, SPI
VREF
Ext
0.024
12
TLV2543
12
66
11 SE
Serial, SPI
VREF
Ext
0.024
12
3.3
ADS7823
ADS7828
ADS7870
ADS7806
ADS7812
ADS7824
ADS1286
TLV1570
TLV1571
12
12
12
12
12
12
12
10
10
50
50
50
40
40
40
37
1250
1250
1 SE
8 SE/4 Diff
8 SE
1 SE
1 SE
4 SE
1 PDiff
8 SE
1 SE
Serial, I2C
Serial, I2C
Serial, SPI
Serial, SPI/P8
Serial, SPI
Serial, SPI/P8
Serial, SPI
Serial, SPI
Serial, SPI
VREF
VREF
PGA(1, 2, 4, 8, 10, 16, 20)
+4, 5, 10
+4, 10, 3.3, 5, 10
10
VREF
2V, VREF
VREF
Ext
Int/Ext
Int
Int/Ext
Int/Ext
Int/Ext
Ext
Int/Ext
Ext
0.024
0.024
0.06
0.011
0.012
0.012
0.024
0.1
0.1
12
12
12
12
12
12
12
10
10
71
71
72
73
74
73
72
60
60
0.75
0.675
4.6
28
35
50
1
9
12
1Suggested
Package(s)
VSSOP-8
VSSOP-8
TQFP-32
SSOP-24
TQFP-32
TQFP-48
SOIC-8, VSSOP-8
SOIC-8, VSSOP-8
SOIC-16, TSSOP-16
SOIC-8, VSSOP-8
SOIC-20, TSSOP-20
CDIP SB-24, PDIP-24
SSOP-28, SOIC-20
SSOP-28, SOIC-28
SOT23-6
PDIP-8, SOIC-8,
VSSOP-8
SOIC-8, VSSOP-8
SSOP-16
SSOP-28
SSOP-20
SOIC-20, TSSOP-20
SOIC-24, TSSOP-24
SOIC-8, VSSOP-8
SOIC-8, VSSOP-8
SOIC-16, TSSOP-16
SOIC-8, VSSOP-8
SOIC-20, TSSOP-20
SOIC-20, TSSOP-20
SOIC-20, TSSOP-20
QFN-8
QFN-40
TQFP-48
PDIP-28, SOIC-28
SOIC-20
PDIP-8, SOIC-8,
VSSOP-8,
CDIP-20, PDIP-20,
PLCC-20, SOIC-20,
SSOP-20
PDIP-20, SOIC-20,
SSOP-20
VSSOP-8
TSSOP-16
SSOP-28
PDIP-28, SOIC-28
PDIP-16, SOIC-16
PDIP-28, SOIC-28
PDIP-8, SOIC-8
SOIC-20, TSSOP-20
SOIC-24, TSSOP-24
Price1
$2.45
$2.75
$3.40
$4.05
$5.70
$6.65
$3.95
$3.95
$5.30
$3.95
$5.30
$30.50
$8.90
$8.90
$2.15
$1.95
$1.95
$2.50
$3.10
$2.90
$5.30
$5.80
$3.85
$3.85
$4.20
$3.85
$4.85
$3.40
$3.55
$1.50
$9.75
$3.75
$14.05
$10.85
$1.55
$4.45
$4.45
$2.85
$3.35
$4.15
$12.75
$11.80
$13.10
$2.80
$3.80
$3.70
Selection Tables
59
Data Converters
SAR ADCs Selection Guide (Continued)
Device
TLV1572
TLV1578
ADS7887
TLC1514
TLC1518
ADS7867
ADS7826
TLV1504
TLV1508
TLC1550
TLC1551
TLV1544
TLV1548
Res.
(Bits)
10
10
10
10
10
10
10
10
10
10
10
10
10
Sample
Rate
(kSPS)
1250
1250
1000
400
400
200
200
200
200
164
164
85
85
Number
of Input
Channels
1 SE
8 SE
1 SE, 1 PDiff
4 SE/3 Diff
8 SE/7 Diff
1 SE, 1 PDiff
1 PDiff
4 SE
8 SE
1 SE
1 SE
4 SE
8 SE
Interface
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
P10
P10
Serial, SPI
Serial, SPI
Input Voltage
(V)
VREF
VREF
VDD (2.35V to 5.25V)
+5.5 (VREF = VDD)
+5.5 (VREF = VDD)
VDD (1.2V to 3.6V)
VREF
+2, 4
+2, 4
VREF
VREF
VREF
VREF
VREF
Ext
Ext
Ext (VDD)
Int/Ext
Int/Ext
Ext
Ext
Int/Ext
Int/Ext
Ext
Ext
Ext
Ext
Linearity
(%)
0.1
0.1
0.073
0.012
0.012
0.05
0.0048
0.05
0.05
0.05
0.1
0.1
0.1
NMC
10
10
10
10
10
10
10
10
10
10
10
10
10
SINAD
(dB)
60
60
61
60
60
61
62
60
60
Power
(mW)
8.1
12
17.5
10
10
0.25
0.6
3.3
3.3
10
10
1.05
1.05
TLC1542
10
38
11 SE
Serial, SPI
VREF
Ext
0.05
10
TLC1543
10
38
11 SE
Serial, SPI
VREF
Ext
0.1
10
TLC1549
TLV1543
10
10
38
38
1 SE
11 SE
Serial, SPI
Serial, SPI
VREF
VREF
Ext
Ext
0.1
0.1
10
10
4
2.64
TLV1549
TLC1541
10
10
38
32
1 SE
11 SE
Serial, SPI
Serial, SPI
VREF
VREF
Ext
Ext
0.1
0.1
10
10
1.32
6
TLV571
ADS7888
TLC0820A
8
8
8
1250
1000
392
1 SE
1 SE, 1 PDiff
1 SE
P8
Serial, SPI
P8
VREF
VDD (2.35V to 5.25V)
VREF
Ext
Ext (VDD)
Ext
0.5
0.2
0.2
8
8
8
49
49
12
17.5
37.5
ADS7827
ADS7868
TLC545
ADS7830
TLV0831
TLC548
TLV0832
TLV0834
8
8
8
8
8
8
8
8
250
200
76
75
49
45.5
44.7
41
1 PDiff
1 SE, 1 PDiff
19 SE
8 SE/4 Diff
1 SE
1 SE
2 SE/1 Diff
4 SE/2 Diff
Serial, SPI
Serial, SPI
Serial, SPI
Serial, I2C
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
VREF
VDD (1.2V to 3.6V)
VREF
VREF
+3.6 (VREF = VDD)
VREF
VREF
VREF
Ext
Ext
Ext
Int/Ext
Ext
Ext
Ext
Ext
0.2
0.1
0.2
0.19
0.2
0.2
0.2
0.2
8
8
8
8
8
8
8
8
48
50
50
0.6
0.25
6
0.675
0.66
9
5
0.66
TLC541
40
11 SE
Serial, SPI
VREF
Ext
0.2
TLC549
TLV0838
8
8
40
37.9
1 SE
8 SE/4 Diff
Serial, SPI
Serial, SPI
VREF
VREF
Ext
Ext
0.2
0.2
8
8
9
0.66
TLC0831
TLC542
8
8
31
25
1 Diff
11 SE
Serial, SPI
Serial, SPI
VREF
VREF
Ext
Ext
0.2
0.2
8
8
3
6
TLC0832
TLC0834
TLC0838
8
8
8
22
20
20
2 SE/1 Diff
4 SE/2 Diff
8 SE/4 Diff
Serial, SPI
Serial, SPI
Serial, SPI
VREF
VREF
VREF
Ext
Ext
Ext
0.2
0.2
0.2
8
8
8
12.5
3
3
1Suggested
Package(s)
SOIC-8
TSSOP-32
SOT23-6, SC-70
SOIC-16, TSSOP-16
SOIC-20, TSSOP-20
SOT23-6
QFN-8
SOIC-16, TSSOP-16
SOIC-20, TSSOP-20
PLCC-28, SOIC-24
PLCC-28, SOIC-24
SOIC-16, TSSOP-16
CDIP-20, LCCC-20,
SSOP-20
CDIP-20, LCCC-20,
PDIP-20, PLCC-20,
SOIC-20
PLCC-20, SOIC-20,
SSOP-20
PDIP-8, SOIC-8
CDIP-20, LCCC-20,
PDIP-20, PLCC-20,
SOIC-20, SSOP-20
PDIP-8, SOIC-8
PDIP-20, PLCC-20,
SOIC-20
SOIC-24, TSSOP-24
SOT23-6, SC-70
PLCC-20, SOIC-20,
SSOP-20
QFN-8
SOT23-6
PDIP-28, PLCC-28
TSSOP-16
PDIP-8, SOIC-8
PDIP-8, SOIC-8
PDIP-8, SOIC-8
PDIP-14, SOIC-14,
TSSOP-14
PDIP-20, PLCC-20,
SOIC-20
PDIP-8, SOIC-8
PDIP-20, SOIC-20,
TSSOP-20
PDIP-8, SOIC-8
PDIP-20, PLCC-20,
SOIC-20
PDIP-8, SOIC-8
PDIP-14, SOIC-14
PDIP-20, SOIC-20,
TSSOP-20
Price1
$3.30
$3.85
$1.65
$2.90
$3.45
$1.55
$1.25
$2.65
$3.15
$3.90
$3.35
$1.95
$2.30
$2.50
$1.90
$1.71
$2.15
$1.85
$3.20
$2.35
$1.25
$1.90
$1.00
$1.35
$3.10
$1.40
$1.40
$1.20
$1.40
$1.45
$1.50
$0.95
$1.45
$1.40
$1.50
$1.40
$1.45
$1.45
60
Selection Tables
Data Converters
8051-Based Intelligent ADC Selection Guide

Device
MSC1200Y3
MSC1201Y3
MSC1210Y5
MSC1211Y2
MSC1211Y5
MSC1213Y2
MSC1213Y5
MSC1202Y3
1Suggested
ADC
Res.
(Bits)
24
24
24
24
24
24
24
16
Sample
Rate
(kSPS)
1
1
1
1
1
1
1
2
Number of
Input
Channels
8 Diff/8 SE
6 Diff/6 SE
8 Diff/8 SE
8 Diff/8 SE
8 Diff/8 SE
8 Diff/8 SE
8 Diff/8 SE
6 Diff/6 SE
Input Voltage
(V)
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
PGA (1-128), 2.5
VREF
Int
Int
Int
Int
Int
Int
Int
Int
CPU
Core
8051
8051
8051
8051
8051
8051
8051
8051
Program
Memory
(kB)
8
8
32
4
32
4
32
8
Program
Memory
Type
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
SRAM
(kB)
0.1
0.1
1.2
1.2
1.2
1.2
1.2
0.2
Power
(mW/V)
3/2.7-5.25
3/2.7-5.25
4/2.7-5.25
4/2.7-5.25
4/2.7-5.25
4/2.7-5.25
4/2.7-5.25
3/2.7-5.25
DAC Output
(Bits)
8-Bit IDAC
8-Bit IDAC
16-Bit PWM
4 x 16-Bit I/VDAC
4 x 16-Bit I/VDAC
2 x 16-Bit I/VDAC
2 x 16-Bit I/VDAC
8-Bit IDAC
Price1
$6.45
$5.95
$12.00
$17.50
$20.95
$12.65
$15.95
$4.95
DACs Selection GuideNumber of

Device
DAC1220
DAC1221
1Suggested
Res.
(Bits)
20
16
Settling Time
(ms)
10
2
Number of Output
DACs
1
1
Interface
Serial, SPI
Serial, SPI
Output
(V)
5
2.5
VREF
Ext
Ext
Linearity
(%)
0.0015
0.0015
Monotonic
(Bits)
20
16
Power
(mW)
2.5
1.2
Package
SSOP-16
SSOP-16
Price1
$6.65
$5.25
String and R-2R DACs Selection Guide

Device
DAC7654
DAC7664
DAC7634
DAC7641
DAC7642
DAC7643
DAC7644
DAC7734
DAC712
DAC714
DAC715
DAC716
DAC7631
DAC7632
DAC7744
DAC8501
DAC8531
DAC8532
DAC8544
DAC8534
DAC8541
DAC8554
DAC8571
DAC8574
DAC7731
DAC7742
DAC7741
1Suggested
Architecture
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
String
String
String
String
String
String
String
String
String
R-2R
R-2R
R-2R
Res.
(Bits)
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
Settling
Time
(s)
12
12
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
10
10
10
10
10
5
5
5
Number of
Output
DACs
4
4
4
1
2
2
4
4
1
1
1
1
1
2
4
1
1
2
4
4
1
4
1
4
1
1
1
Interface
Serial, SPI
P16
Serial, SPI
P16
P16
P16
P16
Serial, SPI
P16
Serial, SPI
P16
Serial, SPI
Serial, SPI
Serial, SPI
P16
Serial, SPI
Serial, SPI
Serial, SPI
Parallel
Serial, SPI
P16
Serial, SPI
Serial, I2C
Serial, I2C
Serial, SPI
P16
P16
Output
(V)
2.5
2.5
+VREF, VREF
+VREF, VREF
+VREF, VREF
+VREF, VREF
+VREF, VREF
+VREF, VREF
10
10
+10
+10
+VREF, VREF
+VREF, VREF
+VREF, VREF
VREF /MDAC
+VREF
+VREF
+VREF
+VREF
+VREF
+VREF
+VREF
+VREF
+10, 10
+10, 10
+10, 10
VREF
Int
Int
Ext
Ext
Ext
Ext
Ext
Ext
Int
Int
Int
Int
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
ext
Ext
Ext
Int/Ext
Int/Ext
Int/Ext
Linearity
(%)
0.0015
0.0015
0.0015
0.0015
0.0015
0.0015
0.0015
0.0015
0.003
0.0015
0.003
0.003
0.0015
0.0015
0.0015
0.0987
0.0987
0.0987
0.025
0.0987
0.096
0.0122
0.0987
0.0987
0.0015
0.0015
0.0015
Monotonic
(Bits)
16
16
15
15
15
15
15
16
15
16
16
16
15
15
16
16
16
16
16
16
16
16
16
16
16
16
16
Power
(mW)
(typ)
18
18
7.5
1.8
2.5
2.5
7.5
50
525
525
525
525
1.8
2.5
50
0.72
0.72
1.35
4.75
2.7
0.72
1
0.42
2.7
100
100
100
Package(s)
LQFP-64
LQFP-64
SSOP-48
TQFP-32
LQFP-32
LQFP-32
SSOP-48
SSOP-48
SOIC-28
SOIC-16
SOIC-28
SOIC-16
SSOP-20
LQFP-32
SSOP-48
VSSOP-8
VSSOP-8, QFN 3 x 3
VSSOP-8
QFN 5 x 5
TSSOP-16
TQFP-32
MSOP-8, SON-8
MSOP-8
TSSOP-16
SSOP-24
LQFP-48
LQFP-48
Price1
$21.80
$20.75
$19.95
$6.30
$10.55
$10.55
$19.95
$31.45
$14.50
$14.50
$15.85
$15.85
$5.85
$10.45
$31.45
$3.00
$3.00
$5.35
$9.75
$9.75
$3.00
$3.45
$2.95
$10.25
$8.20
$8.70
$8.30
Selection Tables
61
Data Converters
String and R-2R DACs Selection Guide (Continued)
Settling
Time
(s)
0.5
1.0
1.0
1.0
1.0
0.5
10
10
10
10
10
7
7
10
10
Number of
Output
DACs
1
4
1
1
4
1
1
1
1
4
4
1
2
1
4
VREF
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Int
Int
Ext
Ext
Monotonic
(Bits)
16
16
16
16
14
14
12
12
12
12
12
12
12
12
12
Power
(mW)
(typ)
0.025
0.0275
0.015
0.015
0.0275
0.025
0.7
0.5
0.7
3
3
2.5
3.75
1.8
20
Device
DAC8811
DAC8814
DAC8830
DAC8831
DAC8803
DAC8801
DAC7512
DAC7513
DAC7571
DAC7573
DAC7574
DAC7611
DAC7612
DAC7613
DAC7614
Architecture
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
String
String
String
String
String
R-2R
R-2R
R-2R
R-2R
DAC7615
R-2R
12
10
Serial, SPI
+VREF, VREF
Ext
0.012
12
20
DAC7616
DAC7617
DAC7621
DAC7624
DAC7625
DAC7714
DAC7715
DAC7724
DAC7725
DAC7551
DAC7552
DAC7553
DAC7554
DAC7558
DAC811
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
R-2R
String
String
String
String
String
R-2R
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
10
10
7
10
10
10
10
10
10
5
5
5
5
5
4
4
4
1
4
4
4
4
4
4
1
2
2
4
8
1
Serial, SPI
Serial, SPI
P12
P12
P12
Serial, SPI
Serial, SPI
P12
P12
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
P12
+VREF, VREF
+VREF, VREF
4.096
+VREF, VREF
+VREF, VREF
+VREF, VREF
+VREF, VREF
+VREF, VREF
+VREF, VREF
+VREF
+VREF
+VREF
+VREF
+VREF
+10, 5, 10
Ext
Ext
Int
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Int
0.012
0.012
0.012
0.012
0.012
0.012
0.012
0.012
0.012
0.012
0.024
0.024
0.0244
0.012
0.006
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
3
3
2.5
20
20
45
45
45
45
0.27
0.675
0.675
3.5
4.5
625
DAC813
TLV5614
TLV5616
R-2R
String
String
12
12
12
4
3
3
1
4
1
P12
Serial, SPI
Serial, SPI
+10, 5, 10
+VREF
+VREF
Int/Ext
Ext
Ext
0.006
0.1
0.1
12
12
12
270
3.6
0.9
TLV5618A
String
12
2.5
Serial, SPI
+VREF
Ext
0.08
12
1.8
DAC7545
DAC7541
DAC8043
TLV5610
TLV5613
TLV5619
TLV5630
TLV5633
TLV5636
TLV5638
R-2R
R-2R
R-2R
String
String
String
String
String
String
String
12
12
12
12
12
12
12
12
12
12
2
1
1
1
1
1
1
1
1
1
1
1
1
8
1
1
8
1
1
2
P12
P12
Serial, SPI
Serial, SPI
P8
P12
Serial, SPI
P8
Serial, SPI
Serial, SPI
VREF/MDAC
VREF/MDAC
VREF/MDAC
+VREF
+VREF
+VREF
+VREF
+2, 4
+2, 4
+2, 4
Ext
Ext
Ext
Ext
Ext
Ext
Int/Ext
Int/Ext
Int/Ext
Int/Ext
0.012
0.012
0.012
0.4
0.1
0.08
0.4
0.08
0.1
0.1
12
12
12
12
12
12
12
12
12
12
30
30
2.5
18
1.2
4.3
18
2.7
4.5
4.5
1Suggested
Interface
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, I2C
Serial, I2C
Serial, I2C
Serial, SPI
Serial, SPI
P12
Serial, SPI
Output
(V)
VREF/MDAC
VREF/MDAC
+VREF
+VREF
VREF/MDAC
VREF/MDAC
VCC
+VREF
+VREF
+VREF
+VREF
4.096
4.096
+VREF, VREF
+VREF, VREF
Linearity
(%)
0.0015
0.0015
0.0015
0.0015
0.0061
0.0061
0.38
0.38
0.096
0.096
0.096
0.012
0.012
0.012
0.012
Res.
(Bits)
16
16
16
16
14
14
12
12
12
12
12
12
12
12
12
Package(s)
MSOP-8, SON-8
SSOP-28
SOIC-8
SOIC-14
SSOP-28
MSOP-8, SON-8
VSSOP-8, SOT23-6
VSSOP-8, SSOP-8
SOP-6, SOT23-6
TSSOP-16
MSOP-10
PDIP-8, SOIC-8
SOIC-8
SSOP-24
PDIP-16, SOIC-16,
SSOP-20
PDIP-16, SOIC-16,
SSOP-20
SOIC-16, SSOP-20
SOIC-16, SSOP-20
SSOP-20
PDIP-28, SOIC-28
PDIP-28, SOIC-28
SOIC-16
SOIC-16
PLCC-28, SOIC-28
PLCC-28, SOIC-28
SON-12
QFN-16
QFN-16
MSOP-10
QFN-32
CDIP SB-28, PDIP-28,
SOIC-28
PDIP-28, SOIC-28
SOIC-16, TSSOP-16
VSSOP-8, PDIP-8,
SOIC-8
CDIP-8, PDIP-8,
SOIC-8, LCCC-20
SOIC-20
PDIP-18, SOP-18
SOIC-8
SOIC-20, TSSOP-20
SOIC-20, TSSOP-20
SOIC-20, TSSOP-20
SOIC-20, TSSOP-20
SOIC-20, TSSOP-20
SOIC-8, VSSOP-8
SOIC-8, CDIP-8,
LCCC-20
Price1
$8.50
$19.27
$7.95
$7.95
$14.40
$5.50
$1.45
$1.45
$1.55
$6.15
$6.15
$2.55
$2.70
$2.50
$6.70
$6.70
$5.40
$5.40
$2.75
$10.25
$10.25
$11.45
$11.45
$11.85
$11.85
$1.40
$2.35
$2.35
$5.60
$10.40
$11.00
$12.60
$7.45
$2.60
$4.75
$5.25
$6.70
$5.25
$8.50
$2.60
$2.60
$8.85
$4.70
$3.65
$3.25
62
Selection Tables
Data Converters
String and R-2R DACs Selection Guide (Continued)

Settling
Time
(s)
1
0.8
0.8
0.8
0.2
0.2
12.5
Number of
Output
DACs
1
2
2
2
1
1
1
VREF
Int/Ext
Ext
Ext
Ext
Ext
Ext
Ext
Monotonic
(Bits)
12
12
12
12
12
12
10
Power
(mW)
(typ)
2.7
1
1
1
0.0275
0.0275
0.75
Device
TLV5639
DAC7800
DAC7801
DAC7802
DAC7811
DAC7821
TLC5615
Architecture
String
R-2R
R-2R
R-2R
R-2R
R-2R
String
DAC6571
DAC6573
DAC6574
TLV5604
TLV5606
TLV5617A
TLV5608
TLV5631
TLV5637
TLC5620
TLC5628
TLV5620
TLV5621
TLV5628
DAC5571
DAC5573
DAC5574
TLC7225
TLC7226
TLV5623
TLV5625
TLV5627
TLV5624
TLV5629
TLV5632
TLV5626
TLC7524
String
String
String
String
String
String
String
String
String
String
String
R-2R
R-2R
String
String
String
String
R-2R
R-2R
String
String
String
String
String
String
String
R-2R
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
9
9
9
3
3
2.5
1
1
0.8
10
10
10
10
10
8
8
8
5
5
3
3
2.5
1
1
1
0.8
0.1
1
4
4
4
1
2
8
8
2
4
8
4
4
8
1
4
4
4
4
1
2
4
1
8
8
2
1
Serial, I2C
Serial, I2C
Serial, I2C
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, I2C
Serial, I2C
Serial, I2C
P8
P8
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
Serial, SPI
P8
VDD
+VREF
+VREF
+VREF
+VREF
+VREF
+VREF
+VREF
+2, 4
+VREF
+VREF
+VREF
+VREF
+VREF
VDD
+VREF
+VREF
+VREF
VREF
+VREF
+VREF
+VREF
+2, 4
Ext
+2, 4
+2, 4
1mA
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Int/Ext
Int/Ext
Ext
Ext
Ext
Ext
Ext
Int
Ext
Ext
Ext
Ext
Ext
Ext
Ext
Int/Ext
Ext
Int/Ext
Int/Ext
Ext
0.195
0.195
0.195
0.05
0.15
0.1
0.4
0.4
0.1
0.4
0.4
0.2
0.4
0.4
0.195
0.195
0.195
0.4
0.4
0.2
0.2
0.2
0.2
0.4
0.4
0.4
0.2
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
0.5
1.5
1.5
3
0.9
1.8
18
18
4.2
8
15
6
3.6
12
0.5
1.5
1.5
75
90
2.1
2.4
3
0.9
18
18
4.2
5
TLC7528
R-2R
0.1
P8
1mA
Ext
0.2
7.5
R-2R
0.1
P8
2mA
Ext
0.2
20
TLC7628
1Suggested
Interface
P12
Serial, SPI
P12
P12
Serial, SPI
P12
Serial, SPI
Output
(V)
+2, 4
1mA
1mA
1mA
VREF/MDAC
VREF/MDAC
+VREF
Linearity
(%)
0.1
0.012
0.012
0.012
0.0120
0.0120
0.1
Res.
(Bits)
12
12
12
12
12
12
10
Package(s)
SOIC-20, TSSOP-20
PDIP-16, SOIC-16
PDIP-24, SOIC-24
PDIP-24, SOIC-24
MSOP-10, SON-8
QFN-20, TSSOP-20
PDIP-8, SOIC-8,
VSSOP-8
SOP-6
TSSOP-16
VSSOP-10
SOIC-16, TSSOP-16
SOIC-8, VSSOP-8
SOIC-8
SOIC-20, TSSOP-20
SOIC-20, TSSOP-20
SOIC-8
PDIP-14, SOIC-14
PDIP-16, SOIC-16
PDIP-14, SOIC-14
SOIC-14
PDIP-16, SOIC-16
SOP-6
TSSOP-16
VSSOP-10
SOIC-24
PDIP-20, SOIC-20
SOIC-8, VSSOP-8
SOIC-8
SOIC-16, TSSOP-16
SOIC-8, VSSOP-8
SOIC-20, TSSOP-20
SOIC-20, TSSOP-20
SOIC-8
PDIP-16, PLCC-20,
SOIC-16, TSSOP-16
PDIP-20, PLCC-20,
SOIC-20, TSSOP-20
SOIC-20, PDIP-20
Price1
$3.45
$13.55
$17.95
$14.00
$3.15
$3.15
$1.90
$1.40
$3.05
$3.05
$3.70
$1.30
$2.25
$4.90
$5.60
$3.20
$1.50
$2.45
$1.00
$1.65
$2.20
$0.90
$2.55
$2.55
$2.35
$2.15
$0.99
$1.70
$2.05
$1.60
$3.15
$3.35
$1.90
$1.45
$1.55
$1.45
Preview products are listed in bold blue.
Selection Tables
63
Data Converters/Digital Signal Controllers

High-Speed DACs Selection Guide
Res.
(Bits)
14
14
16
12
12
10
10
14
12
10
10
12
14
14
14
12
12
Device
DAC904
THS5671A
DAC5687
DAC902
THS5661A
DAC900
THS5651A
DAC2904
DAC2902
DAC2900
DAC5652
DAC5662
DAC5672
DAC5675A
DAC5686
DAC2932
DAC5674
1Suggested
Supply
(V)
3.0 to 5.0
3.0 to 5.0
1.8/3.3
3.0 to 5.0
3.0 to 5.0
3.0 to 5.0
3.0 to 5.0
3.3 to 5.0
3.3 to 5.0
3.3 to 5.0
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.3
1.8/3.3
2.7 to 3.3
1.8/3.3
Update Rate
(MSPS)
165
125
500
165
125
165
125
125
125
125
200
200
200
400
500
40
400
Settling Time
(ns)
30
35
12
30
35
30
35
30
30
30
20
20
20
12
12
25
20
Number of
DACs
1
1
2
1
1
1
1
2
2
2
1
2
2
1
2
2
1
Power Typ
(mW)
170
175
750 to 1400
170
175
170
175
310
310
310
290
330
330
660
400
29
420
DNL
max (LSB)
1.75
3.5
3
1.75
2.0
0.5
0.5
2.5
1
0.5
2
3
2
9
0.5
2
INL
max (LSB)
2.5
7
6
2.5
4
1
1
3
1
1
2
4
4
12
2
3.5
Package(s)
28-SOP, 28-TSSOP
28-SOP, 28-TSSOP
100-HTQFP
28-SOP, 28-TSSOP
28-SOP, 28-TSSOP
28-SOP, 28-TSSOP
28-SOP, 28-TSSOP
48-TQFP
48-TQFP
48-TQFP
48-TQFP
48-TQFP
48-TQFP
48-HTQFP
100-HTQFP
48-TQFP
48-HTQFP
Price1
$7.35
$7.35
$22.50
$5.95
$6.60
$4.20
$4.50
$12.00
$10.70
$6.00
$7.60
$10.70
$13.25
$25.00
$19.75
$8.35
$15.00
TMS320C28x Controller Generation
Device
Boot
MIPS ROM
RAM
12-Bit
#
#
A/D Chs/
Core
Flash/
CAP/ PWM Hi-Res Conversion
WD
Comm Ports
I/O Voltage
ROM Timers QEP Channels PWM Time (ns) EMIF Timer Other SPI SCI CAN Pins (V) Packaging ($U.S.)+
Flash Devices
TMS320F2801-PZA/S/Q
TMS320F2806-PZA/S/Q
TMS320F2808-PZA/S/Q
TMS320F2812-GHHA/S/Q
TMS320F2812-PGFA/S/Q
100
100
100
100
100
100
150
150
150
150
8KB
8KB
8KB
8KB
8KB
8KB
8KB
8KB
8KB
8KB
12KB
12KB
20KB
20KB
36KB
36KB
36KB
36KB
36KB
36KB
32KB
32KB
64KB
64KB
128KB
128KB
128KB
256KB
256KB
256KB
9
9
15
15
15
15
7
7
7
7
2/1
2/1
4/2
4/2
4/2
4/2
6/2
6/2
6/2
6/2
6+2
6+2
12 + 4
12 + 4
12 + 4
12 + 4
16
16
16
16
3
3
4
4
4
4
16Ch/160
16Ch/160
16Ch/160
16Ch/160
16Ch/160
16Ch/160
16Ch/80
16Ch/80
16Ch/80
16Ch/80
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
I2C
I2C
I2C
I2C
I2C
I2C
McBSP
McBSP
McBSP
McBSP
2
2
4
4
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
1
1
1
1
2
2
1
1
1
1
32
32
32
32
32
32
56
56
56
56
1.8
1.8
1.8
1.8
1.8
1.8
1.9
1.9
1.9
1.9
100-LQFP
100-BGA
100-LQFP
100-BGA
100-LQFP
100-BGA
128-LQFP
128-LQFP
179-BGA
176-LQFP
150
150
150
8KB
8KB
8KB
40KB
40KB
40KB
7
7
7
6/2
6/2
6/2
16
16
16
16Ch/80
16Ch/80
16Ch/80
Y
Y
Y
Y
Y
McBSP 1
McBSP 1
McBSP 1
2
2
2
1
1
1
56
56
56
1.9
1.9
1.9
128-LQFP $9.11
179-BGA $10.63
176-LQFP $10.63
150
150
150
150
8KB
8KB
8KB
8KB
36KB
36KB
36KB
36KB
128KB
256KB
256KB
256KB
7
7
7
7
6/2
6/2
6/2
6/2
16
16
16
16
16Ch/80
16Ch/80
16Ch/80
16Ch/80
Y
Y
Y
Y
Y
Y
McBSP
McBSP
McBSP
McBSP
2
2
2
2
1
1
1
1
56
56
56
56
1.9
1.9
1.9
1.9
128-LQFP
128-LQFP
179-BGA
176-LQFP
$5.79
$5.79
$8.69
$8.69
$11.52
$11.52
$13.81
$14.73
$15.65
$15.65
RAM-Only Devices
TMS320R2811-PBKA/Q
TMS320R2812-GHHA/Q
TMS320R2812-PGFA/Q
ROM Devices
TMS320C2810-PBKA/Q
TMS320C2811-PBKA/Q
TMS320C2812-GHHA/Q
TMS320C2812-PGFA/Q
1
1
1
1
$7.05
$8.22
$9.59
$9.59
Prices are quoted in U.S. dollars and represent year 2006 suggested resale pricing. All prices are subject to change. Customers are advised to obtain the most current and complete pricing
information from TI prior to placing orders. TI may verify final pricing prior to accepting any order.
Minimum volumes for C281x devices are 10 KU with NRE of $11,000.
A = 40 to 85C; S = 40 to 125C (10% adder over A); Q = 40 to 125C, Q100 qualified (15% adder over S)
All devices are available in PB-Free Green packaging.
64
Selection Tables
Microcontrollers
MSP430 Ultra-Low-Power Microcontrollers Selection Guide

Prgm.
(kB)
Device
SRAM
I/O
Timer
A B
DMA USART
SPI,
I2C
SVS
BOR
MPY
Comp
A
Temp
Sensor
ADC
Ch/Res
DAC
Ch/Res
Package(s)
Price1
$0.99
$1.35
$2.00
$2.25
$2.40
$2.50
$2.15
$2.30
$2.00
$2.30
$3.00
$3.60
$5.05
$5.75
$6.05
$4.60
$5.30
$5.60
$4.95
$5.55
$5.85
$6.75
$7.45
$7.95
$8.25
$8.65
$8.95
$0.55
$0.70
$0.99
$1.15
$1.49
$1.65
$0.90
$0.99
$1.35
$1.70
$2.75
$3.15
$3.55
Flash/ROM-Based x1xx Family with 16-Bit Watchdog (VCC 1.8V to 3.6V)

MSP430F1101A
128
14
Slope
MSP430C1101
MSP430F1111A
1
2
128
128
14
14
3
3
Slope
Slope
MSP430C1111
MSP430F1121A
2
4
128
256
14
14
3
3
Slope
Slope
MSP430C1121
MSP430F1122
MSP430F1132
MSP430F1222
MSP430F1232
MSP430F122
MSP430F123
MSP430C1331
MSP430C1351
MSP430F133
MSP430F135
MSP430F147
MSP430F148
MSP430F149
MSP430F1471
MSP430F1481
MSP430F1491
MSP430F155
MSP430F156
MSP430F157
MSP430F167
MSP430F168
MSP430F169
MSP430F1610
MSP430F1611
MSP430F1612
4
4
8
4
8
4
8
8
16
8
16
32
48
60
32
48
60
16
24
32
32
48
60
32
48
55
256
256
256
256
256
256
256
256
512
256
512
1024
2048
2048
1024
2048
2048
512
1024
1024
1024
2048
2048
5120
10240
5120
14
14
14
22
22
22
22
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
7
7
7
7
7
7
3
3
3
7
7
7
7
7
7
1
1
1
1
1
1
1
1
2
2
2
2
2
2
1
1
1
2
2
2
2
2
2
Slope
5/10
5/10
8/10
8/10
Slope
Slope
Slope
Slope
8/12
8/12
8/12
8/12
8/12
Slope
Slope
Slope
8/12
8/12
8/12
8/12
8/12
8/12
8/12
8/12
8/12
2/12
2/12
2/12
2/12
2/12
2/12
2/12
2/12
2/12
20-SOIC, 20-TSSOP
20-TVSOP, 24-QFN
20-SOP, 20-TSSOP, 24-QFN
20-SOIC, 20-TSSOP
20-TVSOP, 24-QFN
20-SOIC, 20-TSSOP
20-TVSOP, 24-QFN
20-SOIC, 20-TSSOP, 32-QFN
64-TQFP, 64-QFN
64-TQFP, 64-QFN
64-LQFP, 64-TQFP, 64-QFN
64-LQFP, 64-QFN
64-LQFP, 64-QFN
64-LQFP, 64-QFN
64-LQFP
64-LQFP
64-LQFP
64-LQFP
64-LQFP
64-LQFP
64-LQFP
64-LQFP
64-LQFP
Slope
Slope
1/10
1/10
1/16
1/16
Slope
Slope
Slope
Slope
1/10
1/10
1/10
2/Amp
2/Amp
2/Amp
14-TSSOP, 14-PDIP, 16-QFN

20-TSSOP, 20-SOIC, 24-QFN
38-TSOP, 40-QFN
38-TSOP, 40-QFN
38-TSOP, 40-QFN
2
2
2
2
2
2
$0.60
$1.35
$1.10
$1.70
Flash-Based F2xx Family with 16 MIPS and 16-Bit Watchdog (VCC 1.8-3.6V)
MSP430F2001
MSP430F2011
MSP430F2002
MSP430F2012
MSP430F2003
MSP430F2013
MSP430F2101
MSP430F2111
MSP430F2121
MSP430F2131
MSP430F2234
MSP430F2254
MSP430F2274
1Suggested
1
2
1
2
1
2
1
2
4
8
8
16
32
128
128
128
128
128
128
128
128
256
256
512
512
1024
10
10
10
10
10
10
16
16
16
16
32
32
32
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
resale price in U.S. dollars in quantities of 1,000. 2Comparator A+.
Selection Tables
65
Microcontrollers/Interface
MSP430 Ultra-Low-Power Microcontrollers Selection Guide (Continued)
Prgm.
(kB)
Device
SRAM
(B)
I/O
Timer USART,
LCD
A B USCI2 Segments DMA SVS BOR
MPY
Comp Temp
A Sensor
ADC
Ch/Res
DAC
Ch/Res
Package(s)
Price1
64-LQFP, 64-QFN
64-LQFP, 64-QFN
64-LQFP, 64-QFN
64-LQFP, 64-QFN
64-LQFP
64-LQFP
64-LQFP
64-LQFP
64-LQFP
48-SSOP, 48-QFN
48-SSOP, 48-QFN
48-SSOP, 48-QFN
64-LQFP
64-LQFP
64-LQFP
64-LQFP
80-LQFP, 100-LQFP
80-LQFP, 100-LQFP
80-LQFP, 100-LQFP
80-LQFP
80-LQFP
80-LQFP
100-LQFP
100-LQFP
100-LQFP
100-LQFP
100-LQFP
100-LQFP
100-LQFP
$2.60/1.90
$2.95/2.10
$3.40
$3.90
$3.75
$4.05
$4.45
$3.10
$3.45
$3.80
$4.50
$4.95
$5.40
$4.85
$5.45
$5.95
$4.45
$4.70
$4.90
$6.50
$7.35
$7.95
$5.75
$6.50
$7.05
9.45
9.35
10.35
$9.95
Flash/ROM-Based x4xx Family with LCD Driver and 16-bit Watchdog (VCC 1.8V - 3.6V) (Continued)
MSP430F412/C412
MSP430F413/C413
MSP430F415
MSP430F417
MSP430FW423
MSP430FW425
MSP430FW427
MSP430F4250
MSP430F4260
MSP430F4270
MSP430F423
MSP430F425
MSP430F427
MSP430FE423
MSP430FE425
MSP430FE427
MSP430F435
MSP430F436
MSP430F437
MSP430FG437
MSP430FG438
MSP430FG439
MSP430F447
MSP430F448
MSP430F449
MSP430FG4616
MSP430FG4617
MSP430FG4618
MSP430FG4619
1Suggested
4
8
16
32
8
16
32
16
24
32
8
16
32
8
16
32
16
24
32
32
48
60
32
48
60
92
92
116
120
256
256
512
1024
256
512
1024
256
256
256
256
512
1024
256
512
1024
512
1024
1024
1024
2048
2048
1024
2048
2048
4096
8192
8192
4096
48
48
48
48
48
48
48
32
32
32
14
14
14
14
14
14
48
48
48
48
48
48
48
48
48
80
80
80
80
3
3
3, 5
3, 5
3, 5
3, 5
3, 5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
7
7
7
7
7
7
7
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1, 2
2, 2
2, 2
2, 2
96
96
96
96
96
96
96
56
56
56
128
128
128
128
128
128
128/160
128/160
128/160
128
128
128
128
128
128
160
160
160
160
Slope
Slope
Slope
Slope
Slope Flow-meter
Slope Flow-meter
Slope Flow-meter
1/16
1/12
1/16
1/12
1/16
1/12
3/16
3/16
3/16
3/16
E-meter
3/16
E-meter
3/16
E-meter
8/12
8/12
8/12
12/12
2/12
12/12
2/12
12/12
2/12
8/12
8/12
8/12
12/12
2/12
12/12
2/12
12/12
2/12
12/12
2/12
resale price in U.S. dollars in quantities of 1,000. 2Includes UART, IrDA, SPI and I2C.
Preview products appear in bold blue.
CAN Selection Guide

Supply
Voltage
(V)
5
5
5
5
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
Device
SN65HVD251
SN65HVD1040
SN65HVD1050
SN65LBC031
SN65HVD230
SN65HVD231
SN65HVD232
SN65HVD230Q
SN65HVD231Q
SN65HVD232Q
SN65HVD233
SN65HVD234
SN65HVD235
1Suggested
resale price in U.S. dollars in quantities of 1,000. All devices have a signaling rate of 1Mbps except LBC031.
Transient Pulse
Description
Protection (V)
Standby, improved drop-in for PCA82C250/1 200 to 200
Improved drop-in replacement for TJA1040 200 to 200
Improved drop-in replacement for TJA1050 200 to 200
500Kbps
150 to 100
Standby mode
25 to 25
Sleep mode
25 to 25
Cost effective
25 to 25
Automotive temp, standby mode
25 to 25
Automotive temp, sleep mode
25 to 25
Automotive temp, cost effective
25 to 25
Standby mode, diagnostic loop-back
100 to 100
Standby mode, sleep mode
100 to 100
Standby mode, autobaud loop-back
100 to 100
ICC
max
(mA)
65
70
70
20
17
17
17
17
17
17
6
6
6
ESD
(kV)
14
6
6
2
16
16
16
15
15
15
16
16
16
Bus Fault
Protection
(V)
36
27 to 40
27 to 40
5 to 20
4 to 16
4 to 16
4 to 16
7 to 16
7 to 16
7 to 16
36
36
36
Footprint
PCA82C250
TJA1040
TJA1050
SN75LBC031
PCA82C250
PCA82C250
SN65HVD232
PCA82C250
PCA82C250
SN65HVD232
Temp Range
(C)
40 to 125
40 to 125
40 to 125
40 to 125
40 to 85
40 to 85
40 to 85
40 to 125
40 to 125
40 to 125
40 to 125
40 to 125
40 to 125
Package(s)
8-PDIP, 8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
8-SOIC
Price1
$0.90
$1.50
$1.35
$1.35
$1.30
$1.55
$1.55
$1.50
$1.50
$1.45
$1.50
Preview products appear in bold blue.
66
Selection Tables
Interface
RS-485 Selection Guide
3/3
3/3
Triple
Full-Duplex
1/1
Half-Duplex
No. of
Dr/Rx
4/0
Quad-Drivers
4/0
3/3
Quad-Receivers
0/4
1Suggested
Supply
(V)
Enables
DE, RE
3.3
DE, RE
DE, RE
3 to 5
DE, RE
5
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
5
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
DE, RE
No
No
No
3.3
DE, RE
DE, RE
DE, RE
No
No
No
No
No
DE, RE
DE, RE
DE, RE
DE, RE
5
DE, RE
DE, RE
5
Separate DIR
DE, Triple RE
Complementary
Complementary
Pairwise
Pairwise
Complementary
Complementary
Pairwise
Pairwise
Pairwise
Device
SN65HVD12
SN65HVD11
SN65HVD10
SN65HVD08
SN65HVD3082E
SN65HVD3085E
SN65HVD3088E
SN65HVD485E
SN65HVD1176
SN65HVD22
SN65HVD21
SN65HVD20
SN65HVD23
SN65HVD24
SN65HVD07
SN65HVD06
SN65HVD05
SN65LBC176
SN65LBC176A
SN65LBC184
SN65LBC182
SN65ALS176
SN65176B
SN65HVD30
SN65HVD31
SN65HVD32
SN65HVD33
SN65HVD34
SN65HVD35
SN65HVD50
SN65HVD51
SN65HVD52
SN65LBC179
SN65LBC179A
SN65HVD53
SN65HVD54
SN65HVD55
SN65LBC180
SN65LBC180A
SN65ALS180
SN65LBC170
SN65LBC171
SN65LBC172
SN65LBC172A
SN65LBC174A
SN65LBC174A
SN65LBC173
SN65LBC173A
SN65LBC175
SN65LBC175A
SN65175
Features
3.3V Supply Low-Speed Slew-Rate Control
3.3V Supply Low-Speed Slew-Rate Control
3.3V Supply High-Speed Signaling
Wide Supply Range: 3 to 5.5V
Low Power Mode, Optimized for Low-Speed
Low Power Mode, Optimized for Mid-Speed
Low Power Mode, Optimized for High-Speed
Half Duplex Transceiver
PROFIBUS Transceiver, EN 50170
20V to 25V Common Mode Operation
20V to 25V Common Mode, 5Mbps
20V to 25V Common Mode, 25Mbps
Receiver Equalization, 160 Meters at 25 Mbps
Receiver Equalization, 500 Meters at 3 Mbps
Strong Driver Outputs Low Signal Rate
Strong Driver Outputs Mid Signal Rate
Strong Driver Outputs Fast Signal Rate
Low Power
Low Power, Fast Signaling, ESD Protection
Transient Protection, IEC Air, Contact, Surge
IEC ESD Protection, Air and Contact Tests
Fast Signaling, Skew: 15ns
Cost Effective
3.3V Supply, no Enables, 25Mbps
3.3V Supply, with Enables, 25Mbps
Strong Bus Outputs, no Enables, 25Mbps
Low Power, without Enable
High Signaling Rate, High ESD w/o Enables
Strong Bus Outputs, with Enables, 25Mbps
Low Power, with Enables
High Signaling Rate, High ESD with Enables
High Signaling Rate, with Enables
FAST-20 SCSI, Skew: 3ns
FAST-20 SCSI, Skew: 3ns
Low Power
High Signaling Rate, High ESD
Low Power
High Signaling Rate, High ESD
Low Power
High Signaling Rate, High ESD, Low Power
Low Power
High Signaling Rate, High ESD, Low Power
Standard
Signaling
Rate
(Mbps)
1
10
25
10
0.2
1
10
10
40
0.5
5
25
25
3
1
10
40
10
30
0.25
0.25
35
10
25
5
1
25
5
1
25
5
1
10
30
25
5
1
10
30
25
30
30
10
30
10
30
10
50
10
50
10
ESD
(kV)
15
15
15
15
15
15
15
15
10
16
16
16
16
16
16
16
16
2
12
30
15
2
2
15
15
15
15
15
15
15
15
15
2
10
15
15
15
2
10
2
12
12
2
13
2
13
2
6
2
6
2
Receiver
Fail-Safe
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Open
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Open
Open
Open
Open
Open
None
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Open
Open
Short, Open, Idle
Short, Open, Idle
Short, Open, Idle
Open
Open
Open
Open
Open
Open
Short, Open, Idle
Open
Short, Open, Idle
None
Nodes
256
256
64
256
256
256
256
64
160
256
256
64
64
256
256
256
64
32
32
128
128
32
32
64
256
256
64
256
256
64
256
256
32
32
64
256
256
32
32
32
32
32
32
32
32
32
32
32
32
32
32
Package(s)
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC, 8-MSOP
8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
8-SOIC
8-PDIP, 8-SOIC, 8-SOP
8-SOIC
8-SOIC
8-SOIC
14-SOIC
14-SOIC
14-SOIC
8-SOIC
8-SOIC
8-SOIC
8-PDIP, 8-SOIC
8-PDIP, 8-SOIC
14-SOIC
14-SOIC
14-SOIC
14-PDIP, 14-SOIC, 16-QFN
14-PDIP, 14-SOIC
14-SOIC
20-SOIC, 16-SSOP
20-SOIC, 20-SSOP
16-PDIP, 20-SOIC
16-PDIP, 16-SOIC, 20-SOIC
16-PDIP, 20-SOIC
16-PDIP, 16-SOIC, 20-SOIC
16-PDIP, 16-SOIC
16-PDIP, 16-SOIC
16-PDIP, 16-SOIC
16-PDIP, 16-SOIC
16-PDIP, 16-SOIC, 16-SOP
Price1
$1.75
$1.80
$1.85
$1.90
$0.90
$0.90
$1.00
$0.70
$1.55
$1.65
$1.65
$1.65
$1.80
$1.80
$1.50
$1.55
$1.60
$0.90
$1.20
$1.30
$1.05
$1.26
$0.44
Preview
Preview
Preview
$1.70
$1.70
$1.70
Preview
Preview
Preview
$0.85
$1.10
$1.60
$1.60
$1.60
$1.05
$1.35
$1.71
$4.10
$4.10
$1.80
$2.40
$1.90
$2.50
$1.15
$1.50
$1.10
$1.40
$2.70
Selection Tables
67
Interface
RS-232 Selection Guide
Device
TL145406
GD75232
MAX3243
MAX202
MAX207
MAX211
MAX222
SN65C3243
SN75185
SN75C185
SN75C3234
SN75LBC187
SN75LP1185
SN75LPE185
SN75LV4737A
LT1030
MC1488
SN55188
SN75188
SN75C188
SN75C198
SN75154
SN75C1154
SN75LBC241
GD75323
MAX3238
SN65C3238
SN75196
SN75C3238
SN75LP196
SN65C23243
SN752232
SN75C23243
UC5171
UC5172
1Suggested
Description
Triple RS-232 Drivers/Receivers
Multiple RS-232 Drivers and Receivers
3V to 5.5V Multichannel RS-232 Line
Driver/Receiver with 15kV ESD (HBM) Protection
5V Dual RS-232 Line Driver/Receiver with 15kV
ESD Protection
5V Multichannel RS-232 Line Driver/Receiver with
15kV ESD Protection
5V Multichannel RS-232 Line Driver/Receiver with
15kV ESD Protection
5V Dual RS-232 Line Driver/Receiver with
15kV ESD Protection
3V to 5.5V Multichannel RS-232 Line Driver/Receiver
Low-Power Multiple Drivers and Receivers
Multichannel EIA-232 Driver/Receiver with Charge Pump
Low-Power Multiple RS-232 Drivers and Receivers
Low-Power Multiple Drivers and Receivers
Quad Low-Power Line Driver
Quad Line Driver
Quad Line Driver
Quad Line Driver
Quad Differential Line Receiver
Quad Low-Power Drivers/Receivers
Low-Power LinBiCMOSTM Multiple Drivers and Receivers
Multiple RS-232 Driver and Receiver
Low-Power Multiple RS-232 Drivers and Receivers
3V to 5.5V Dual RS-232 Port
Dual RS-232 Port
3V to 5.5V Dual RS-232 Port
Octal Line Driver with TTL Mode Selection
Octal Line Driver with Long Line Drive
Drivers
per
Pkg.
3
3
3
Receivers
per
Pkg.
3
5
5
Supply
Voltage(s)
(V)
12, 5
12, 5
3.3, 5
ICC
(mA)
(max)
20
20
1
Footprint
MC14506
GD75232
MAX3243
Package(s)
PDIP, SOIC
PDIP, SOIC, SSOP, TSSOP
SOIC, SSOP, TSSOP
Price1
$0.94
$0.22
$0.99
15
MAX202
SOIC, TSSOP
$0.58
20
MAX207
SOIC, SSOP
$1.08
20
MAX211
SOIC, SSOP
$1.08
10
MAX222
SOIC
$1.26
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
8
8
5
5
5
5
5
5
5
5
0
0
0
0
0
0
4
4
5
3
3
3
3
3
3
10
10
10
0
0
3.3 or 5
12, 5
12, 5
3.3 to 5
5
5, 12
5, 12
3 or 5
5
9
9
9
12
12
5 or 12
12, 5
5
12, 5
3.3, 5
3.3 or 5
12, 5
3.3 or 5
5, 12
3.3, 5
5
3.3, 5
9 to 15
9 to 15
1
30
0.75
1
30
1
1
1
1
25
MAX3234
SN75185
SN75C185
MAX3243
SN75LBC187
SN75LP185
SN75LP185
MAX3243
LT1030
MC1488
MC1488
MC1488
MC1488
SN75154
MAX241
GD75323
MAX3238
MAX3238
SN75196
MAX3238
SN75LP185
SOIC, SSOP, TSSOP

PDIP, SOIC
PDIP, SOIC
SOIC, SSOP, TSSOP
SSOP
PDIP, SOIC, SSOP
SOIC, SSOP, TSSOP
PDIP, SOIC
PDIP
CDIP, CFP, LCCC
PDIP, SOIC, SOP
PDIP, SOIC, SOP, SSOP
PDIP, SOIC
PDIP, SOIC, SOP
PDIP, SOIC, SOP
SOIC
SOIC
SSOP, TSSOP
SOIC, SSOP, TSSOP
PDIP, SOIC
SOIC, SSOP, TSSOP
SSOP, TSSOP
SSOP, TSSOP
SSOP, TSSOP
PLCC
PDIP, PLCC
$3.46
$0.43
$0.90
$2.02
$3.60
$1.53
$1.62
$2.61
$0.81
$0.20
$1.97
$0.18
$0.31
$2.25
$0.41
$0.76
$1.73
$0.22
$1.13
$3.24
$0.41
$2.81
$1.53
$4.32
$0.81
$3.42
$6.33
$3.25
25
0.16
0.32
35
8
32
2
2
20
2
1
0.02
50
0.02
42
25
New products appear in bold red.
68
Selection Tables
Interface
1394b Media Summary

Device
UTP-5
POF/HPCF
50m GOF
STP (beta)
STP (DS)
Reach
100m
100m
100m
4.5m
4.5m
s100
X
X
s200
s400
X
X
X
X
s800
X
X
X
s1600
X
X
X
s3200
X
X
Higher speeds and greater distances provide increased versatility for industrial and automated systems requiring high bandwidth real-time data.
1394 Link-Layer Controllers Selection Guide

Device
TSB12C01A
TSB12LV01B
TSB12LV21B
TSB12LV26
TSB12LV32
TSB42AA4
TSB42AB4
TSB42AC3
TSB82AA2
1Suggested
Supply Voltage Speed Max

(V)
(Mbps)
5
100
3.3
400
3.3
400
3.3
400
3.3
400
3.3
400
3.3
400
3.3
400
3.3
800
FIFO
(kb)
2
2
4
9
4
8
8
10
Pin/
Package
100-LQFP
100-TQFP
176-LQFP
100-TQFP
100-LQFP
128-TQFP
128-TQFP
100-TQFP
11
144-LQFP
Description
High-Performance 5V Link Layer with 32-Bit Host I/F, 2kb FIFOs
High-Performance 1394 3.3V Link Layer for Telecom, Embedded & Industrial App., 32-Bit I/F, 2kb FIFO
PCILynx - PCI to 1394 3.3V Link Layer with 32-Bit PCI I/F, 4kb FIFOs
OHCI-Lynx PCI-Based IEEE 1394 Host Controller
General-Purpose Link Layer Controller (GP2Lynx)
1394 Link Layer Controller with DTCP Content Protection for Consumer Electronics Applications
1394 Link Layer Controller for Consumer Electronics Applications No Content Protection
High-Performance Link Layer with 32-Bit I/F. May Be Cycle Master; Has 10kb FIFO and JTAG Support.
PHY-Link Timing Compliant with 1394a-2000 for Industrial and Bridge Applications.
High-Performance 1394b 3.3V OHCI 1.1+ Compliant Link Layer Controller
Price1
$11.75
$8.90
$9.60
$3.95
$5.15
$9.20
$10.95
$6.50
$7.80
1394 Integrated Devices Selection Guide

Device
TSB43AA22
TSB43AA82A
TSB43AB21A
TSB43AB22A
TSB43AB23
TSB43CA42
TSB43CA43A
TSB43CB43A
1Suggested
Supply Voltage
(V)
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
Speed Max
(Mbps)
400
400
400
400
400
400
400
400
FIFO
(kb)
8
4.7
9
9
9
16
16.5
16.5
Package(s)
128-TQFP
144-LQFP
128-TQFP
128-TQFP
144-LQFP, 128-TQFP
176-LQFP
176-LQFP
176-LQFP
Description
1394a Serial Layer Controller +400Mbps, 2-Port Physical Layer
2-Port High Performance Integrated Physical and Link Layer Chip for PC Peripherals
OHCI 1.1, 1394a Link Layer Controller Integrated with 1394a, 400Mbps, 1-Port Physical Layer (PHY)
OHCI 1.1, 1394a Link Layer Controller Integrated with 1394a, 400Mbps, 2-Port Physical Layer (PHY)
OHCI 1.1, 1394a Link Layer Controller Integrated with a 1394a, 400Mbps, 3-Port Physical Layer (PHY)
iceLynx Micro 2-port IEEE 1394a-2000 CES
iceLynx Micro-5C with Streaming Audio and Content Protection
iceLynx Micro with Streaming Audio
Price1
$7.20
$8.30
$4.35
$4.55
$4.90
$10.60
$12.60
$11.40
1394 Physical-Layer Controllers Selection Guide

Device
TSB14AA1A
TSB14C01A
TSB17BA1
TSB41AB1
TSB41AB2
TSB41AB3A
TSB41BA3A
TSB41LV04A
TSB41LV06A
TSB81BA3
1Suggested
Supply Voltage
(V)
3.3
5
3.3
3.3
3.3
3.3
3.3
3.3
3.3
1.8, 3.3
Speed Max
(Mbps)
100
100
100
400
400
400
400
400
400
800
FIFO
(kb)
1
1
1
1
2
3
3
4
6
3
Package(s)
48-TQFP
64-LQFP
24-TSSOP
48-HTQFP, 64-HTQFP
64-HTQFP
80-HTQFP
80-HTQFP
80-HTQFP
100-HTQFP
80-HTQFP
Description
IEEE 1394-1995, 3.3V, 1-Port, 50/100Mbps, Backplane PHY
IEEE 1394-1995, 5V, 1-Port, 50/100Mbps Backplane Physical Layer Controller
1394b-2002 Compliant Cat5 Cable Transceiver for up to 100 Meters
IEEE 1394a One-Port Cable Transceiver/Arbiter
IEEE 1394a Two-Port Cable Transceiver/Arbiter
IEEE 1394a Three-Port Cable Transceiver/Arbiter
1394b-2002 3-Port Physical Layer Device
IEEE 1394a Four-Port Cable Transceiver/Arbiter
IEEE 1394a Six-Port Cable Transceiver/Arbiter
IEEE P1394b s800 Three-Port Cable Transceiver/Arbiter
Price1
$5.90
$5.45
$2.50
$1.50
$1.85
$3.00
$6.50
$6.50
$6.40
$7.80
Selection Tables
69
Interface
UARTs Selection Guide
FIFOs
Device
Channels (Bytes)
TL16C450
1
0
TL16C451
1
0
TL16C452
2
0
TL16C550C
1
16
TL16C550D
1
16
TL16C552/552A
2
16
TL16C554/554A
4
16
TL16C750
1
16 or 64
TL16C752B
2
64
TL16C754B
4
64
TL16PC564B/BLV
1
64
TL16PIR552
2
16
TIR1000
0
None
TUSB3410
0
None
1Suggested
Baud Rate
max (Mbps)
0.256
0.256
0.256
1
1
1
1
1
3
5V-3, 3.3V-2
1
1
0.115
0.922
Voltage (V)
Package(s)
5
40-PDIP, 44-PLCC
5
68-PLCC
5
68-PLCC
5, 3.3
48-LQFP, 40-PDIP, 44-PLCC, 48-TQFP
5, 3.3, 2.5
5
68-PLCC
5
80-LQFP, 68-PLCC
5, 3.3
64-LQFP, 44-PLCC
3.3
48-LQFP
5, 3.3
80-LQFP, 68-PLCC
5, 3.3
100-BGA, 100-LQFP
5
80-QFP
2.7 to 5.5
8-OP, 8-TSSOP
3.3
32-LQFP
Description
Single UART without FIFO
Single UART with Parallel Port and without FIFO
Dual UART with Parallel Port and without FIFO
Single UART with 16-Byte FIFOs and Auto Flow Control
Single UART with 16-Byte FIFOs and Auto Flow Control
Dual UART with 16-Byte FIFOs and Parallel Port
Quad UART with 16-Byte FIFOs
Single UART with 64-Byte FIFOs, Auto Flow Control, Low-Power Modes
Dual UART with 64-Byte FIFO
Quad UART with 64-Byte FIFO
Single UART with 64-Byte FIFOs, PCMCIA Interface
Dual UART with 16-Byte FIFOs, Selectable IR and 1284 Modes
Standalone IrDA Encoder and Decoder
RS232/IrDA Serial-to-USB Converter
Price1
$1.50
$2.50
$2.55
$1.75
$1.75
$3.90 /$3.85
$6.05/$6.00
$3.70
$3.10
$8.35
$5.90/$3.10
$6.10
$1.15
$2.50
USB Hub Controllers Selection Guide

Device
TUSB2036
TUSB2046B
TUSB2077A
TUSB2136
TUSB5052
1Suggested
Speed
Full (1.1)
Full (1.1)
Full (1.1)
Full (1.1)
Full (1.1)
I2C
No
No
No
Yes
Yes
Ports
2
4
7
2
5
Voltage
(V)
3.3
3.3
3.3
3.3
3.3
Package
32-LQFP
32-LQFP
48-LQFP
64-LQFP
100-LQFP
Description
2/3-Port Hub for USB with Optional Serial EEPROM Interface
4-Port Hub for USB with Optional Serial EEPROM Interface Supporting Windows 95/DOS Mode
7-Port USB Hub with Optional Serial EEPROM Interface
2-Port Hub with Integrated General-Purpose Function Controller
5-Port Hub with Integrated Bridge to Two Serial Ports
Price1
$1.15
$1.20
$1.95
$3.25
$5.10
Package
64-LQFP
32-LQFP
80-TQFP
Price1
$2.50
$2.25
$2.80
USB Peripherals Selection Guide

Device
TUSB3210
TUSB3410
TUSB6250
1Suggested
Speed
Full
Full
Full, high
Voltage
(V)
3.3
3.3
3.3
Remote
Wakeup
Yes
Yes
Yes
Description
USB Full-Speed General-Purpose Device Controller
RS232/IrDA Serial-to-USB Converter
USB 2.0 High-Speed ATA/ATAPI Bridge Solution
PCI Bridges Selection Guide

Device
HPC3130
HPC3130A
PCI2040
PCI2060
PCI2050B
PCI2250
1Suggested
Intel
Compatible
Part Number
21150bc
21152ab
Speed
(MHz)
33
66
Expansion
Interface
(Bits)
32
64
66
66
33
32
32
32
Hot
Swap
MicroStar BGA Voltage(s)

Packaging
(V)
No
3.3
No
3.3
Friendly
Yes
3.3, 5
Package(s)
128-LQFP, 120-QFP
128-LQFP, 144-LQFP, 120-QFP
144-BGA, 144-LQFP
Friendly
Friendly
Friendly
257-BGA
257-BGA, 208-LQFP, 208-QFP
176-LQFP, 160-QFP
Yes
Yes
No
3.3, 5
3.3, 5
3.3, 5
Description
Hot Plug Controller
Hot Plug Controller
PCI-to-DSP Bridge Controller, Compliant to
Compact PCI Hot Swap Specification 1.0
Asynchronous 32-Bit, 66MHz PCI-to-PCI Bridge
PCI-to-PCI Bridge
32-Bit, 33MHz PCI-to-PCI Bridge, Compact PCI
Hot-Swap Friendly, 4-Master
Price1
$10.95
$10.95
$10.55
$9.50
$9.50
$6.10
70
Selection Tables
Interface/Power and Control
PCI CardBus Controllers Selection Guide

Device
PCI1510
PCI1520
PCI1620
PCI4510
PCI4520
PCI6420
PCI6620
PCI7410
PCI7420
Voltage
(V)
3.3
3.3
1.8, 3.3, 5
3.3
3.3
3.3
3.3
3.3
3.3
D3
Cold Wake
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Integrated
1394
No
No
No
Yes
Yes
No
No
Yes
Yes
Integrated
ZV
No
No
No
No
No
No
No
No
No
Package(s)
144-BGA, 144-LQFP
209-BGA, 208-LQFP
209-BGA, 208-LQFP
209-BGA, 208-LQFP
257-BGA
288-BGA
288-BGA
209-BGA, 208-LQFP
288-BGA
PCI7510
PCI7610
3.3
3.3
Yes
Yes
Yes
Yes
No
No
209-BGA, 208-LQFP
209-BGA, 208-LQFP
PCI7620
3.3
Yes
Yes
No
288-BGA
1Suggested
Description
Single Slot PC CardBus Controller
PC Card Controller
PC Card, Flash Media, and Smart Card Controller
PC Card and Integrated 1394a-2000 OHCI Two-Port-PHY/Link-Layer Controller
Two Slot PC Card and Integrated 1394a-2000 OHCI Two-Port-PHY/Link-Layer Controller
Integrated 2-Slot PC Card and Dedicated Flash Media Controller
Integrated 2-Slot PC Card with Smart Card and Dedicated Flash Media Controller
PC Card, Flash Media, Integrated 1394a-2000 OHCI 2-Port PHY/Link-Layer Controller
Integrated 2-Slot PC Card, Dedicated Flash Media Socket & 1394a-2000
OHCI 2-Port-PHY/Link-Layer Controller
Integrated PC Card, Smart Card and 1394 Controller
Integrated PC Card, Smart Card, Flash Media ,1394a-2000 OHCI 2-Port-PHY/
Link-Layer Controller
Integrated 2-Slot PC Card with Smart C, Flash Media, 1394a-2000 OHCI
2-Port-PHY/Link-Layer Controller
Price1
$3.60
$4.35
$7.35
$8.00
$9.15
$9.50
$10.50
$11.00
$12.00
$11.00
$12.00
$13.00
Power+ Logic: 8-Bit Devices with Integrated Control Logic and FETs (TC = 40C to +125C)
Device
TPIC6259
TPIC6273
TPIC6595
TPIC6596
TPIC6A2591
TPIC6A5951
TPIC6A5961
TPIC6B2592
TPIC6B2732
TPIC6B5952
TPIC6B5962
TPIC6C5952
TPIC6C5962
1Short-circuit
Description
Addressable Latch
D-Type Latch
Shift Register
Shift Register
Addressable Latch
Shift Register
Shift Register
Addressable Latch
D-Type Latch
Shift Register
Shift Register
Shift Register
Shift Register
VDS max
(V)
45
45
45
45
50
50
50
50
50
50
50
33
33
ICC typ
(A)
15
15
15
15
500
500
500
20
20
20
20
20
20
IO
(A)
0.25
0.25
0.25
0.25
0.35
0.35
0.35
0.15
0.15
0.15
0.15
0.1
0.1
IPEAK
(A)
0.75
0.75
0.75
0.75
1.1
1.1
1.1
0.5
0.5
0.5
0.5
0.25
0.25
rDS(on) typ
()
1.3
1.3
1.3
1.3
1
1
1
5
5
5
5
7
7
EAS max
(mJ)
75
75
75
75
75
75
75
30
30
30
30
30
30
tPLH typ
(ns)
625
625
650
650
125
125
125
150
150
150
150
80
80
ESD max
(kV)
3
3
3
3
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Package(s)
20/SOP (DW), DIP (N)
20/DIP (NE), 24/SOP (DW)
16/SOP (D), DIP (N)
16/SOP (D), DIP (N)
and current-limit protection. 2Current-limit capability.
PWM Power Supply Control (Single Output) Selection Guide

Typical
Power
Max
Level
Practical
Device
(W)
Frequency
Peak Current Mode Controllers
UCC38C40
10 to 250
1MHz
UCC38C41
10 to 250
1MHz
UCC38C42
10 to 250
1MHz
UCC38C43
10 to 250
1MHz
UCC38C44
10 to 250
1MHz
UCC38C45
10 to 250
1MHz
1Suggested
StartUp
Current
50A
50A
50A
50A
50A
50A
Operating
Current
Supply
Voltage
(V)
UVLO:
On/Off
(V)
2.3mA
2.3mA
2.3mA
2.3mA
2.3mA
2.3mA
6.6 to 20
6.6 to 20
9 to 20
7.6 to 20
9 to 20
7.6 to 20
7.0/6.6
7.0/6.6
14.5/9
8.4/7.6
14.5/9
8.4/7.6
VREF
(V)
VREF
Tol.
(%)
Max
Duty
Cycle
(%)
5
5
5
5
5
5
2
2
2
2
2
2
100
50
100
100
50
50
E/A
Voltage
FeedForward
Internal
Drive
(Sink/Source)
(A)
Package(s)
Price1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1/1
1/1
1/1
1/1
1/1
1/1
SOIC-8, PDIP-8, MSOP-8

$0.95
$0.95
$0.95
$0.95
$0.95
$0.95
Selection Tables
71
Power Management
Switching DC/DC Controllers Selection Guide
VO
VO
VREF
VIN
(V)
(V)
Tol
Device
(V)
(max) (min) (%)
General-Purpose DC/DC Controllers
TPS40007 2.25 to 5.5
4
0.7
1.5
TPS40021 2.25 to 5.5
4
0.7
1
Driver Output
Current Current
(A)
(A)2
Protection3
Multiple
Outputs
Frequency
(kHz)
300
Program up
to 1MHz
Program up
to 1MHz
Program up
to 1MHz
Program up
to 1MHz
450
1
2
15
25
No
No
TPS40057
8 to 40
35
0.7
20
No
TPS40061
10 to 55
40
0.7
10
No
TPS40071
4.25 to 28
23
0.7
20
No
TPS51020
4.25 to 28
24
0.85
20
OPC OVP UVLO PG
Application4
Light
Source Source/ Prebias
Load
Only
Sink Operation PGD DDR Efficient
$0.99
$1.15
$1.35
$1.40
$1.35
$3.15
$1.20
DC/DC Controllers with Light Load Efficiency

TPS51116
3 to 28
3.4
1.5
0.8
Comments
10
1+2
Up to 500
Sync Switcher w/3A Tracking LDO
Other Topology DC/DC Controllers

TPS6420x
UC3572
1.8 to 6.5
4.75 to 30
6.5
0
1.2
48
Price1
Comments
0.5
3
5
No
No
300
Simple, Hysteretic High-Efficiency Controller in SOT-23

Simple Inverting PWM Controller
$0.55
$1.05
1Suggested
resale price in U.S. dollars in quantities of 1,000. 2Current levels of this magnitude can be supported.
= over-current protection, OVP= over-voltage protection, UVLO = under-voltage lockout, PG = power good.
4The controller of choice for most applications will be the source/sink version, which has two-quadrant
operation and will source or sink output current. PGD = Predictive Gate DriveTM technology included; DDR = supports DDR memory.
3OCP
DC/DC Converter (Integrated FETs) Selection Guide

Device
Buck (Step Down)
TPS62200/1/2/3/4/5/6
TPS62000/1/2/3/4/5/6/7/8
TPS62051/2/3/4/5
TPS62040/2/3/4/6
TPS62110/1/2
TPS54310/1/2/3/4/5/6
TPS54610/1/2/3/4/5/6
TPS54810
TPS54910
TPS799xx
Inverter
TPS6755
TL497A
1Suggested
VIN (V)
Output Current (A)
VOUT (V)
Package(s)
Price1
2.5 to 6.0
2.0 to 5.5
2.7 to 10
2.5 to 6.0
3.1 to 17
3.0 to 6.0
3.0 to 6.0
4.0 to 6.0
3.0 to 4.0
1.2 to 3.3
0.3
0.6
0.8
1.2
1.5
3
6
8
9
0.2
Adj.,1.5, 1.8, 3.3, 1.6, 2.5, 2.6

Adj., 0.9, 1.0,1.2, 1.5, 1.8, 2.5, 3.3, 1.9
Adj., 1.5, 1.8, 3.3
Adj. 1.5, 1.6, 1.8, 3.3
Adj., 3.3, 5
Adj., 0.9, 1.2, 1.5, 1.8, 2.5, 3.3
Adj., 0.9, 1.2, 1.5, 1.8, 2.5, 3.3
Adj. to 0.9
Adj. to 0.9
Adj tp 6.5
SOT 23-5
MSOP-10
MSOP-10
MSOP-10, QFN-10
QFN-16
HTSSOP-20
HTSSOP-28
HTSSOP-28
HTSSOP-28
SOT23-5
$1.35
$1.60
$1.85
$2.20
$2.50
$2.95
$3.90
$4.20
$4.40
0.35
2.7 to 9.0
4.5 to 12
0.2
0.5
Adj. from -1.25 to - 9.3

Adj. from -1.2 to -25
SOIC-8
TSSOP-14
$1.25
$0.86
72
Selection Tables
Power Management
Low Dropout Regulators (LDOs) Selection Guide

Output Options
Iq
(A)
Voltage (V)
Packages
Adj.
Min VIN
Max VIN
Accuracy (%)
SC70
SOT23
MSOP
SO8
SOT223
TO220
QFN
DDPAK
IO
(mA)
Device
VDO
@ IO
(mV)
Features2
CO3
Comments
Price1
PG
/EN, BP
EN, BP
EN
EN, BP
0.47F C
0.47F C
0.1F C
No Cap
1F C
No Cap
MSP430; Lowest Iq
VIN Up to 24V
Low Noise, VIN Down to 1.8V
Low Noise
RF Low Noise, High PSRR
Reverse Leakage Protection
$0.34
$0.34
$0.41
$0.95
$0.40
$0.45
/EN, SVS
EN, BP
10F C
No Cap
Low Noise
$0.60
$0.65
EN, BP
EN, BP
EN, BP
2.2F C
No Cap
No Cap

Capacitor Free, DMOS
$0.65
$1.05
$0.85
EN, BP
EN, PG
/EN,SVS
EN, SVS
EN, BP
EN
2.2F C
No Cap
10F T
No Cap
1F C
22F T
100F T

Capacitor Free, DMOS
Fast Transient Response
VIN Down to 1.8V, Low Noise
Fast LDO with Reverse Leak
$1.05
$2.50
$1.05
$1.10
$1.35
$2.57
$3.00
EN, BP
/EN
2.2F C
4.7F T
Low Noise, High PSRR

Duty Cycled Short
$1.05
$1.86
Positive Voltage, Single-Output Devices

TPS797xx
TPS715xx/A
TPS722xx
REG101
TPS792xx
TPS731xx
10
50
50
100
100
150
105
415
50
60
38
30
1.2
3.2
80
400
185
400
TPS771xx
TPS732xx
150
250
75
40
90
400
TPS794xx
REG102
TPS736xx
250
250
400
145
150
75
172
400
300
TPS795xx
REG103
TPS777xx
TPS725xx
TPS786xx
UCCx83-x
UCx85-x
500
500
750
1000
1500
3000
5000
105
115
260
170
390
400
350
265
500
85
75
310
400
8mA
1.8, 3.0, 3.3

2.5, 3.0, 3.3, 5
1.5, 1.6, 1.8
2.5, 2.8, 2.85, 3.0, 3.3, 5
2.5, 2.8, 3.0
1.5, 1.8, 2.5, 3.0,
3.3, 5.0, EEProm4
1.5, 1.8, 2.7, 2.8, 3.3, 5
1.5, 1.8, 2.5, 3.0
3.3, 5.0, EEProm4
1.8, 2.5, 2.8, 3.0, 3.3
2.5, 2.8, 2.85, 3.0, 3.3, 5
1.5, 1.8, 2.5, 3.0
3.3, EEProm4
1.6, 1.8, 2.5, 3.0, 3.3
2.5, 2.7, 3.0, 3.3, 5
1.5, 1.8, 2.5, 3.3
1.5, 1.6, 1.8, 2.5
1.8, 2.5, 2.8, 3.0, 3.3
3.3, 5
1.5, 2.1, 2.5
5.5
24
5.5
10
5.5
5.5
4
4
3
1.5
1.2 15
1.2 2.5
2.5 5.5
1.2 5.5
1.2 5.5
1.8
2.5
1.8
2.6
2.7
1.7
1.5 5.5
1.2 5.5
2.7 10 2
1.7 5.5 1
1.2 5.5
2.5 5.5
1.2 5.5
2.7 5.5 2
1.8 10 2
1.7 5.5 1
1.2 5.5
2.5 5.5
1.5 5.5
1.2 5.5
1.2 5.5
1.2 8.5
1.2 6
2.7
2.1
2.7
1.8
2.7
1.8
1.7
5.5
15
10
6
5.5
9
7.5
3
2
2
2
3
2.5
1
Negative Voltage, Single-Output Devices

TPS723xx
UCC384-x
200
500
280
150
130
200
2.5
12.0, 5.0
1.2 to 9 10 2.7 2
1.25 to 1 15 3.5 3
1Suggested
resale price in U.S. dollars in quantities of 1,000. 2PG = Power Good; EN = Active High Enable; /EN = Active Low Enable; SVS Supply Voltage Supervisor; BP = Bypass Pin for noise
reduction capacitor. 3C = Ceramic; T = Tantalum; No Cap = Capacitor Free LDO. 4TIs TPS73xxx series of LDOs are EEProm programmable at the factory, allowing production of custom fixed
voltages (as well as custom current limits), minimum quantities apply. Please contact TI.
Dual-Output LDOs Selection Guide

Output Options
Device
TPS707xx
VDO1 VDO2
IO1 IO2 at IO1 at IO2
(mA) (mA) (mV) (mV)
250 150 83
TPS708xx
250 150
83
95
TPS701xx
500 250
170
95
TPS702xx
500 250
170
95
TPS767D3xx 1000 1000
230
170
2500
2800
1000
1000
185
185
TPPM0110
TPPM0111
TPS703xx
1500 300 1000

1500 300 1000
2000 1000 160
TPS704xx
2000 1000
1Suggested
160
IQ at
IO
(A)
95
Features
Voltage
Accuracy PWP Min Max
(V)
Adj.
(%) Package VO VO /EN PG SVS Seq
3.3/2.5, 3.3/1.8,
2
1.2 5
3.3/1.5, 3.3/1.2
3.3/2.5, 3.3/1.8,
2
1.2 5
3.3/1.5, 3.3/1.2
3.3/2.5, 3.3/1.8,
2
1.2 5
3.3/1.5, 3.3/1.2
3.3/2.5, 3.3/1.8,
2
1.2 5
3.3/1.5, 3.3/1.2
3.3/2.5
1.2 5
3.3/1.8
3.3/1.8
2
1.8 3.3
3.3/1.5
2
1.5 3.3
3.3/2.5, 3.3/1.8,
2
1.2 5
3.3/1.5, 3.3/1.2
3.3/2.5, 3.3/1.8,
2
1.2 5
3.3/1.5, 3.3/1.2
Low Min Max

Noise VIN VIN
2.7 5.5
CO2
10F T
2.7
5.5
10F T
2.7
5.5
10F T
2.7
5.5
10F T
2.7
10
10F T
4.7
4.7
2.7
5.3
5.3
5.5
100F T
100F T
22F T
2.7
5.5
22F T
Description
Dual-Output LDO with
Sequencing
Independent Enable
Sequencing
Independent Enable
Dual-Output FAST LDO
with Integrated SVS
Outputs Track within 2V
Outputs Track within 2V
Sequencing
Independent Enable
Price1
$1.20
$1.20
$1.50
$1.50
$2.00
$1.60
$1.60
$2.35
$2.35
resale price in U.S. dollars in quantities of 1,000. 2T = Tanalum.
Selection Tables
73
Power Management
Plug-In Power Solutions Selection Guide

Input Bus
Voltage (V)
Device
POUT
or IOUT
Isolated
Outputs
VO Range
(V)
VO
Adjustable
Price1
15A
22A
30A
6A
10A
3A
60A
15A
22A
30A
6A
10A
30A
2.25A
30A
16A
6A
10A
12A
18A
26A
50A
6A
10A
12W
1.5A
3A
6A
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
0.8 to 2.5
0.8 to 2.5
0.8 to 2.5
0.8 to 2.5
0.7 to 2.5
0.9 to 3.6
0.8 to 3.6
0.8 to 3.6
0.8 to 3.6
0.8 to 3.6
0.8 to 3.6
0.8 to 3.6
0.7 to 3.6
0.9 to 5.5
0.7 to 3.6
0.7 to 5.5
0.7 to 5.5
0.7 to 5.5
0.8 to 1.8/1.2 to 5.5
0.8 to 1.8/1.2 to 5.5
0.8 to 1.8/1.2 to 5.5
0.8 to 5.5
0.8 to 1.8/1.2 to 5.5
0.8 to 1.8/1.2 to 5.5
5 to 15
2.5 to 12/12 to 22
2.5 to 12/12 to 22
2.5 to 12/12 to 22
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
$11.60
$18.15
$25.00
$6.90
$9.80
$4.50
$35.00
$11.60
$18.15
$25.00
$6.90
$9.80
$18.00
$4.28
$18.00
$12.60
$7.90
$10.80
$11.60
$18.15
$25.00
$35.00
$6.90
$9.80
$8.00
$8.00
$11.00
$15.00
3.3V/5V Input 12W Adjustable Plus-to-Minus Voltage Converter

3V to 5V Input, 6W Positive to Negative (Buck-Boost) ISR
Wide-Input, Wide-Output 1.5A Positive to Negative (Buck-Boost) ISR
Wide-Input, Wide-Output 15W Positive to Negative (Buck-Boost) ISR
Wide-Input, Wide-Output 25W Positive to Negative (Buck-Boost) ISR
12W
6W
1.5A
15W
25W
No
No
No
No
No
1.2 to 6.5
3.3 to 15
3 to 15
3 to 15
3 to 15
Yes
Yes
Yes
Yes
Yes
$26.25
$8.00
$8.00
$11.00
$15.00
5 to 12/15VOUT 9W Dual Output Adjustable ISR

10A 12V Input Adjustable Dual Output ISR
9W
10A
No
No
8 to 20
1.3 to 3.6
Yes
Yes
$10.80
$27.40
1W Unregulated Isolated DC/DC Converter with Sychronization

2W Unregulated Isolated DC/DC Converter with Sychronization
1W Regulated Isolated DC/DC Converter with Sychronization
2W Regulated Isolated DC/DC Converter with Sychronization
1W Unregulated Isolated DC/DC Converter with 1500V Isolation
20W, 24V Input Isolated DC/DC Converter
10W, 24V Input Isolated DC/DC Converter
20A, 18V to 60V Input Isolated POL Converter with Track I/O
30W, 18V to 60V Input Isolated POL Converter with Track I/O
10W, 48V Input Isolated DC/DC Converter - Industry Std Footprint
1W
2W
1W
2W
1W
20W
10W
65W
30W
10W
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
5, 12, 15
3.3, 5, 7, 9, 12, 15
3.3, 5
5
5, 12, 15
1.7 to 16.5
1.5 to 12
1.8 to 3.6
3.3, 5, 12
3.3, 5, 12
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
$5.35
$6.95
$5.95
$7.30
$8.50
$32.45
$26.90
$62.00
$25.00
$20.00
1W Unregulated Dual Isolated DC/DC Converter with Sychronization

2W Unregulated Dual Isolated DC/DC Converter with Sychronization
1W Unregulated Dual Isolated DC/DC Converter with 1500V Isolation
1W
2W
1W
Yes
Yes
Yes
5, 12, 15
5, 12, 15
5, 12, 15
No
No
No
$5.90
$6.95
$9.05
Description
Non-Isolated Single Positive Output

PTH03010W
PTH03020W
PTH03030W
PTH03050W
PTH03060W
PTH04000W
PTH04040W
PTH05010W
PTH05020W
PTH05030W
PTH05050W
PTH05060W
PTH05T210W
PTH08080W
PTH08T210W
PTH08T220W
PTH08T230W
PTH08T240W
PTH12010L/W
PTH12020L/W
PTH12030L/W
PTH12040W
PTH12050L/W
PTH12060L/W
PTN04050C
PTN78000W/H
PTN78060W/H
PTN78020W/H
3.3
3.3
3.3
3.3
3.3
3.3/5
3.3/5
5
5
5
5
5
5
5/12
12
5/12
5/12
5/12
12
12
12
12
12
12
3.3/5
VO + 2 to 36
VO + 2 to 36
VO + 2 to 36
3.3V Input 15A POL with Auto-Track Sequencing

3V to 5.5V Input 3A POL with Auto-Track Sequencing
3V to 5.5V Input 60A POL with Auto-Track Sequencing
5V Input 15A POL with Auto-Track Sequencing
5V Input, 30A T2 2nd Gen PTH POL with TurboTrans
5V to 18V Input, 2.25A POL
5.5 to 14V Input, 30A T2 2nd Gen PTH POL with TurboTrans
3V/5V Input, 12W Output Step-Up (Boost) ISR
Wide-Input, Wide-Output 1.5A Positive Step-Down ISR
Wide-Input, Wide-Output 3A Positive Step-Down ISR
Wide-Input, Wide-Output 6A Positive Step-Down ISR
Non-Isolated Single Negative Output

PT6910
PTN04050A
PTN78000A
PTN78060A
PTN78020A
3.3/5
3.3/5
7 to 29
9 to 29
9 to 29
Non-Isolated Multiple Output

PT5060
PT6980
5
12
Isolated Single Output

DCP01_B
DCP02
DCR01
DCR02
DCV01
PT4140
PT4240
PTB78520W
PTB78560A/B/C
PTMA
5, 24
5, 12, 24
5, 12, 24
12, 24
5, 24
24
24
18 to 60
18 to 60
48
Isolated Multiple Output

DCP01_DB
DCP02_D
DCV01_D
1Suggested
5, 15, 24
5, 15, 24
5, 15, 24
74
Standard Linear and Logic
Standard Linear and Logic Selection Guide

Amplifiers and Comparators
I2C Interface
RS-232 Interface
Translation
LM224K
LM248
LM258
LM2902K
LM2904
LM318
LM324K
LMV321
LMV324
LMV341
LMV342 (Preview)
LMV344 (Preview)
LMV358
LMV710
LMV711
LMV821
LMV822
LMV824
LMV931
LMV932
LMV934 (Preview)
LMV981
LMV982
LT1013DI
LT1014DI
MC33078
OP27
TL031I
TL032I
TL034I
TL051I
TL052I
TL054I
TL5580I
TSM104W
TSM104WA
PCA8550
PCA9306
PCF8574
PCF8574A
PCF8575
PCF8575C
MAX202
MAX207
MAX208
MAX211
MAX211E
MAX222
MAX232
MAX3221
MAX3222
MAX3223
MAX3232
MAX3238
MAX3238-Q1
MAX3243
MAX3243E
SN65C1154
SN65C1406
SN65C23243
SN65C3221
SN65C3222
SN65C3223
SN65C3232
SN65C3238
SN65C3243
SN74ALVC164245
SN74AVC16T245
SN74AVC1T45
SN74AVC20T245
SN74AVC24T245
SN74AVC2T45
SN74AVC32T245
SN74AVC4T245
SN74AVC8T245
SN74AVCA164245
SN74AVCAH164245
SN74AVCB164245
SN74AVCB324245
SN74AVCBH164245
SN74AVCBH324245
SN74AVCH20T245
SN74AVCH32T245
SN74AVCH8T245
SN74LVC1T45
SN74LVC2T45
SN74LVC4245A
SN74LVCC3245A
SN74LVCC4245A
Analog Switches
MAX4594
MAX4595
MAX4596
MAX4597
TS5A23166
TS5A3159
Power Management
LM237
LM337
LM4040
LM4041
LP2981
LP2985
MC33063A
MC79L12
MC79L12A
MC79L15
MC79L15A
TL2842
TL2843
TL2844
TL2845
TL431B
TL432B
TL497A
TL594
TL750L10
TL750L12
TL751L10
TL751L12
TL780-12
TL780-15
TLV1117
TLVH431B
TLVH432B
UA723
UA7810
UA7812
UA7815
UA7824
UA78L09A
UA78L10A
UA78L12A
UA78M09
UA78M10
UA78M12
RS-485 Interface
SN65175
SN65176B
SN65ALS176
SN65ALS180
Application Reports
75
To access any of the following application reports, type the

URL www-s.ti.com/sc/techlit/litnumber and replace lit number
with the number in the Lit Number column.
Title
Lit Number
Instrumentation Amplifiers
Programmable-Gain Instrumentation Amplifiers

AC Coupling Instrumentation and Difference Amplifiers
Boost Instrument Amp CMR with Common-Mode Driven Supplies
Increasing INA117 Differential Input Range
Input Filtering the INA117 200V Difference Amplifier
Level Shifting Signals with Differential Amplifiers
sboa024
sboa003
sboa014
sboa001
sboa016
sboa038
Isolation Analog Amplifiers
Simple Output Filter Eliminates Amp Output Ripple, Keeps Full Bandwidth
Single-Supply Operation of Isolation Amplifiers
Isolation Amps Hike Accuracy and Reliability
sboa012
sboa004
sboa064
High-Voltage Signal Conditioning for Low Voltage ADCs

High-Voltage Signal Conditioning for Differential ADCs
Make a 10V to +10V Adjustable Precision Voltage Source
200V Difference Amplifier with Common-Mode Voltage Monitor
Boost Amplifier Output Swing with Simple Modification
Extending the Common-Mode Range of Difference Amplifiers
Simple Circuit Delivers 38Vp-p at 5A from 28V Unipolar Supply
Pressure Transducer to ADC Application
Amplifiers & Bits: Introduction to Selecting Amps for Data Converters (Rev. B)
Precision Absolute Value Circuits
Signal Conditioning Piezoelectric Sensors (Rev. A)
Boost Instrument Amp CMR with Common-Mode Driven Supplies
Comparison of Noise Perf. of FET Transimpedence Amp/Switched Integrator
DC Motor Speed Controller: Control a DC Motor w/o Tachometer Feedback
Diode-Based Temperature Measurement
Level Shifting Signals with Differential Amplifiers
Operational Amplifier Macromodels: A Comparison
Single-Supply, Low-Power Measurements of Bridge Networks
Thermistor Temperature Transducer to ADC Application
Signal Conditioning Wheatstone Resistive Bridge Sensors
3V Accelerometer Featuring TLV2772 Application Brief
Low-Power Signal Conditioning for a Pressure Sensor
sboa097
sboa096
sboa052
sboa005
sboa009
sboa008
sboa037
sloa056
sloa035b
sboa068
sloa033a
sboa014
sboa034
sboa043
sboa019
sboa038
sboa027
sboa018
sloa052
sloa034
slva050
slaa034
Sensors, Sensors Conditioning, 4-20mA Transmitters
Implementing a 4mA to 20mA Current Loop on TI DSPs

20mA to 0-20mA Converter & Current Summing Current-to-Current Converters
0-20mA Receiver using RCV42
Four-Wire RTD Current-Loop Transmitter
IC Building Blocks Form Complete Isolated 4-20mA Current-Loop
Input Overload Protection for the RCV420 4-20mA Current-Loop Receiver
Single Supply 4-20mA Current Loop Receiver
Use Low-Impedance Bridges on 4-20mA Current Loop
Build a 3-Phase Sine Wave Generator with the UAF42
Design a 60Hz Notch Filter with the UAF42
Photodiode Monitoring with Op Amps
Interfacing the MSP430 and TMP100 I2C Temperature Sensor
szza045
sboa053
sbva004
sbfa007
sboa017
sbva003
sboa023
sboa025
sbfa013
sbfa012
sboa035
slaa151
Title
Lit Number
LVDS Outputs on the ADS527x

Measuring Temperature with the ADS1216, ADS1217, or ADS1218 (Rev. A)
Interfacing the ADS1202 Modltr w/ a Pulse Transformer in Galvanically Iso.
Combining ADS1202 w/ FPGA Digital Filter for Current Meas. in Motor Cntrl App
ADS1240/41 App-Note: Accessing the Onboard Temp Diode in the ADS1240/41
Pressure Transducer to ADC Application
Complete Temp Data Acquisition System From a Single +5V Supply
Voltage Ref. Scaling Techniques Increase Converter and Resolution Accuracy
Thermistor Temperature Transducer to ADC Application
sbaa118
sbaa073a
sbaa096
sbaa094
sbaa083
sloa056
sbaa050
sbaa008
sloa052
Digital-to-Analog Converters
SPI-Based Data Acquisition/Monitor Using the TLC2551 Serial ADC (Rev. A)

MSC1210: Incorp. the MSC1210 into Electronic Weight Scale Systems (Rev. A)
Measuring Temperature with the ADS1216, ADS1217, or ADS1218 (Rev. A)
Using the MSC121x as a High-Precision Intelligent Temperature Sensor
slaa108a
sbaa092a
sbaa073a
sbaa100
Interface
Comparing Bus Solutions (Rev. A)

Signaling Rate versus Transfer Rate
Introduction to the Controller Area Network (CAN)
A System Evaluation of CAN Transceivers
M-LVDS Signaling Rate Versus Distance
RS-485 for E-Meter Applications (Rev. A)
Use Receiver Equalization to Extend RS-485 Data Communications
RS-485 at 230-kbps over Uncontrolled Interconnect
The RS-485 Unit Load and Maximum Number of Bus Connections
RS-485 for Digital Motor Control Applications
slla067a
slla098
sloa101
slla109
slla127
slla112a
slla169
slla167
slla166
slla143
Control and Monitoring-Power and Logic
Linear Products Brush Motor Control

TPIC6C596 Power+LogicTM Shift Register Application
TPIC6595 Power+LogicTM 8-Bit Shift Reg. with Low-Side Power
DMOS Switches (Rev. A)
slit110
slia082
slpa004a
RF
Implementing a Bi-directional Frequency Hopping

swra041
Application with TRF6903 and MSP430
Implementing a Bi-directional Wireless UART Application w/TRF6903 & MSP430 swra039
Designing with the TRF6900 Single-Chip RF Transceiver (Rev. D)
swra033d
Designing Switching Voltage Regulators with the TL494 (Rev. C)
slva001c
Power Management-Voltage References and Shunts
Improved Voltage Reference Filter has Several Advantages

Low Power Operation of REF102 10.0V Precision Voltage Reference
Diode-Based Temperature Measurement
sbva010
sbva008
sboa019
Power Management Special Functions
Closed Loop Temperature Regulation Using the UC3638 H-Bridge Motor (Rev. A) slua202a
DN-50 Simple Tech. for Isolating and Correcting Common App. Problems
slua182
U-102 UC1637/2637/3637 Switched Mode Controller for DC Motor Drive
slua137
U-112 A High Precision PWM Transconductance Amplifier for Microstepping slua073
U-115 New Integ. Circuit Produces Robust, Noise Immune Sys. for Brushless slua106
U-120 A Simple. Approach to DC Motor Modeling for Dynamic Stability Analysis slua076
U-130 Dedicated ICs Simplify Brushless DC Servo Amplifier Design
slua083
UC3717 and L-C Filter Reduce EMI and Chopping Losses in Step Motor
slua141
Solenoid/Valve Power Drivers, TEC & Pump Laser Bias
PWM Power Driver Modulation Schemes

Thermo-Electric Cooler Control using a TMS320F2812 DSP and
DRV592 Power Amplifier
sloa092
spra873
Data Converters-Analog Monitor and Control Circuitry
AMC7820REF: A Reference Design for DWDM Pump Lasers
sbaa072
Analog-to-Digital Converters
Data Converters for Industrial Power Measurements

Using Ceramic Resonators with the ADS1255/6
Standard Procedure Direct Meas. Sub-picosecond RMS Jitter High-Speed ADC
High-Voltage Signal Conditioning for Differential ADCs
sbaa117
sbaa104
slwa036
sboa096
TI Worldwide Technical Support

Internet
TI Semiconductor Product Information Center
Home Page
support.ti.com
TI Semiconductor KnowledgeBase Home Page
support.ti.com/sc/knowledgebase
Product Information Centers

Americas
Phone
Fax
Internet
+1(972) 644-5580
+1(972)927-6377
support.ti.com/sc/pic/americas.htm
Europe, Middle East, and Africa

Phone
Belgium (English)
+32 (0) 27 45 54 32
Finland (English)
+358 (0) 9 25173948
France
+33 (0) 1 30 70 11 64
Germany
+49 (0) 8161 80 33 11
Israel (English)
180 949 0107
Italy
800 79 11 37
Netherlands (English) +31 (0) 546 87 95 45
Russia
+7 (0) 95 363 4824
Spain
+34 902 35 40 28
Sweden (English)
+46 (0) 8587 555 22
United Kingdom
+44 (0) 1604 66 33 99
Fax
+49 (0) 8161 80 2045
Internet
support.ti.com/sc/pic/euro.htm
Japan
Fax
International
Domestic
Internet
International
Domestic
+81-3-3344-5317
0120-81-0036
support.ti.com/sc/pic/japan.htm
www.tij.co.jp/pic
Asia
Phone
International
+886-2-23786800
Domestic
Toll Free Number
Australia
1-800-999-084
China
800-820-8682
Hong Kong
800-96-5941
India
+91-80-51381665 (Toll)
Indonesia
001-803-8861-1006
Korea
080-551-2804
Malaysia
1-800-80-3973
New Zealand 0800-446-934
Philippines
1-800-765-7404
Singapore
800-886-1028
Taiwan
0800-006800
Thailand
001-800-886-0010
Fax
+886-2-2378-6808
Email
tiasia@ti.com or ti-china@ti.com
Internet
support.ti.com/sc/pic/asia.htm
Safe Harbor Statement

This publication may contain forward-looking statements that
involve a number of risks and uncertainties. These forwardlooking statements are intended to qualify for the safe harbor from
liability established by the Private Securities Litigation Reform Act
of 1995. These forward-looking statements generally can be
identified by phrases such as TI or its management believes,
expects, anticipates, foresees, forecasts, estimates or
other words or phrases of similar import. Similarly, such statements herein that describe the companys products, business
strategy, outlook, objectives, plans, intentions or goals also are
forward-looking statements. All such forward-looking statements are subject to certain risks and uncertainties that could
cause actual results to differ materially from those in forwardlooking statements. Please refer to TIs most recent Form 10-K for
more information on the risks and uncertainties that could materially affect future results of operations. We disclaim any intention
or obligation to update any forward-looking statements as a result
of developments occurring after the date of this publication.
Important Notice: The products and services of Texas
Instruments Incorporated and its subsidiaries described herein
are sold subject to TIs standard terms and conditions of sale.
Customers are advised to obtain the most current and complete
information about TI products and services before placing orders.
TI assumes no liability for applications assistance, customers
applications or product designs, software performance, or
infringement of patents. The publication of information regarding
any other companys products or services does not constitute TIs
approval, warranty or endorsement thereof.
Technology for Innovators, the black/red banner, C2000, C28x, C64x,

EasyRF, FilterPro, Fusion Digital Power, Impedence Track,
LinBICMOS, MicroStar BGA, OHCI-Lynx, PCILynx, Power+Logic,
PowerPAD, SWIFT, TMS320, TMS320C28x, TMS320C55x,
TMS320C6000, TMS320C64x and TMS320C67x are trademarks of
Important
Texas Instruments. All other trademarks are the property of their
Notice:
The owners.
respective
products
and Texas Instruments Incorporated
2006
services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TIs standard terms and conditions ofD120905
sale. Customers are Printed in U.S.A. by Colonial Press International,
D091905
Miami, Florida, on recycled paper
Texas Instruments Incorporated

14950 FAA BLVD
Fort Worth, Texas 76155-9951
Address service requested
PRSRT STD
U.S. POSTAGE
PAID
DALLAS, TEXAS
PERMIT NO. 2758
SLAB039C
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TIs terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2006, Texas Instruments Incorporated

Industrial Solutions Guide

Uploaded by

Copyright:

Available Formats

Industrial Solutions Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Industrial Solutions Guide

Uploaded by

Copyright:

Available Formats

Industrial Solutions Guide

Amplifiers, Data Converters, Digital Signal Processors, Digital Temperature Sensors,

Test and Measurement

Wireless for Industrial

Programmable Logic Control

Field Bus Systems

Powering Industrial Designs