Slab 039 C

Industrial Solutions Guide
Amplifiers, Data Converters, Digital Signal Processors, Digital Temperature Sensors, Interface, Microcontrollers, Power Controllers, Power Management 1Q 2006
Inside
4 19 24 29 32 34 36 43 45 48 75
Intelligent Sensors Motor Control Security Test and Measurement Wireless for Industrial Programmable Logic Control Field Bus Systems Isolation Powering Industrial Designs Selection Tables Application Reports

Table of Contents
Intelligent Sensors, Process Control
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7 Weigh Scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-14 Flow Metering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16 Linear Voltage Differential Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Current Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Sensor Application Inputs
Plug-In Power
LDOs
DC/DC Conversion
Motor Control
Asynchronous, DC and Servo Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-23
Security
Surveillance Cameras, Glass Breakage and Smoke Detectors . . . . . . . . . . . . . . . . . . . .24-28
POWER MANAGEMENT SOLUTIONS

Pgs 71-73
REF
Test and Measurement

Electronic E-Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Scientific Instrumentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 High-Speed Signal Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Amp
ADC
Wireless for Industrial

RF Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33
Programmable Logic Control

Input/Output Cards, Internal Communication/Interface/Isolation, Core Logic . . . . . . . .34-35
Operational, Pg 51 Analog-to-Digital Logarithmic, Pg 48 Converters High-Speed, Pgs 52-53 Comparators, Pg 52 High-Speed Buffers, Pg 53
Field Bus Systems

Factory Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36-42 RS-485 Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 PROFIBUS Transceivers/CAN Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 1394/USB/UART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-42
Difference, Pg 48 ADCs, Pg 56 Instrumentation, Pgs 49-50 Programmable Gain, Pg 55
Isolation
Digital Coupler and Isolation Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-44
Powering Industrial Designs

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-47
Selection Tables
Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-54 Difference/Log/Isolation Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Instrumentation Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-50 Operational Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Comparators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 High-Speed Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-53 High-Speed Amplifiers, Buffers, PWM Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-54 Power Operational Amplifiers, Temp Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 4-20mA Transmitters and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Voltage References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Data Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-63 ADCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-59 Intelligent ADCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 DACs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60-63 Digital Signal Processors (DSPs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 Microcontrollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64-65 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65-69 1394, UARTs, USB, PCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68-69 Power and Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-73 Standard Linear and Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
SAR
Sensor Conditioners 4-20mA Transmitters, Pg 55
SAR ADCs, Pgs 57-59
Intelligent
Isolation Amplifiers, Pg 48
Intelligent ADCs, Pg 60
INTERFACE Pgs 65-70

LVDS/ MLVDS RS-485/422 CAN
Application Reports
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Worldwide Technical Support

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Texas Instruments 1Q 2006
Complete Industrial Solutions from TI

Power Supply Control
Battery Management
Hot Swap
Special Functions
DSP and FPGA Power
Digital Power
Outputs
Voltage References, Pg 55
REF
Processors
DAC
Amp
Digital-to-Analog Converters
DSP Clocks & Timers
Power Op Amps, Pg 54
TMS320C28xTM Digital Signal Controllers, Pg 63
DACs, Pg 60
PWM Drivers
Microcontrollers
PWM Power Drivers, Pg 53
MSP430 Microcontrollers, Pgs 64-65

Power and Control String
Power + LogicTM, Pg 70
String DACs, Pgs 60-62
Temperature Sensors
Digital Temperature Sensors, Pg 54
R-2R
R-2R DACs, Pgs 60-62
Serial Gigabit Transceiver
USB
PCI
1394
UARTs
GTLP/ VME

Pressure
Transmitter Sensor Signal Conditioning
Pressure sensors convert a physical valueweight, tire pressure, level, force, and flowinto a differential signal in the mV/V range and are referred to as metal thick-film, ceramic or piezo-resistive. The majority of designers use the cost-effective piezo-sensors (25mbar 25bar). However, these are very nonlinear, temperature dependent and have large offset and offset drift. Plus, they require attention to electronic calibration and compensation. The diagram (at right) shows the functional block diagram of a pressure signal conditioning system. Sensor Signal Conditioning performs all necessary functions to calibrate, compensate for temperature variance, scale, and linearize the sensor signal. Analog/Digital Processing there are two ways to convert and linearize the sensor signal. The analog technique results in an analog solution and provides an analog output. This technique is inexpensive and fast, but limited to a maximum of 11- to 16-bit resolution. Digital is more precise, up to 24 bits, and provides a digital output at moderate speed.
2.7 2.4 2.1 Nonlinaerity (%FSR) 1.8 1.5 1.2 0.9 0.6 0.3 0 0.3 0 1 2 3 5 4 6 Bridge Output (mV) 7 8 Corrected Bridge Output
EEPROM ADC
Micro Controller
Interface RS-485/CAN/ Profibus
T Linearization Circuit psi 50 + Excitation Linearization Circuit
SVS Look-Up and Interpolation Logic Int Temp
P 0
Digital Processing
Look-Up and Interpolation Logic
Int Temp
Fault Monitor
Linearization DAC
EEPROM
Non-Linear Bridge Transducer
Over/Under Scale Limiter Analog Processing
0-10V / 4-20mA Output
System Reference
24VDC/2.7V - 5.5V Supply Voltage DC/DC Conversion
Ref
Pressure system functional block diagram.
Uncorrected Bridge Output
Calibration parameters are stored in an external nonvolatile memory to eliminate manual trimming and achieve long-term stability. An evaluation module, PGA309EVM (see below) includes software and calibration sheet for easy evaluation of your sensor + PGA309 combination. The highly integrated, CMOS PGA309, available in TSSOP-16, is tailored for bridge pressure sensors and adds to TIs portfolio of highly flexible, lowest noise amplifier and instrumentation amplifier solutions that also include the OPAx227, OPAx132, OPA335, OPA735, INA326, INA327, INA118 and INA122.
10 Power Supply + VS PRG VOUT 10nF GND

PGA309
PGA309 bridge pressure nonlinearity correction.
The bridge excitation linearization circuit is optimized for VCC bridge pressure nonlinearities with a parabolic shape PRG (see above). The linearization circuit is digitally RS232 VIN programmable, but the pure analog signal conditioning GND side is handled by the same process as in TIs wellPC SDA known 4-20mA transmitters, such as XTR105, XTR106 or SCL XTR108. The heart of the PGA309 is a precision, lowdrift programmable gain instrumentation amplifier using PGA309 an auto-zero technique and includes a programmable PC Interface Board Temperature fault monitor and over/underscale limiter. It also offers a Chamber digital temperature compensation circuit. Calibration is carried out either via a one-wire digital serial interface Block diagram of the PGA309EVM module. or through a two-wire industry-standard connection. Industrial Solutions Guide
Customer Sensor
EEPROM
PGA309 Sensor Interface Board 40C < Temperature < +125C Pressure Input

Pressure
Complete Voltage-Output, Programmable Bridge Sensor Signal Conditioner
PGA309
Get samples, datasheets, EVMs and app reports at: www.ti.com/sc/device/PGA309
Zero-Drift, Low Offset, Single-Supply Op Amps

OPA334, OPA335
Get samples, datasheets, EVMs and app reports at: www.ti.com/sc/device/OPA334, www.ti.com/sc/device/OPA335
Real-world sensors have span and offset errors, ever changing over temperature. In addition, many bridge pressure sensors have a nonlinear output with applied pressure. The sensor conditioner, PGA309 is an ideal choice in combination with low-cost piezo resistive or ceramic thin-film pressure sensors. Key Features Ratiometric or absolute voltage output Digitally calibrated via single-wire or two-wire interface Eliminates potentiometer and trimming Low, time-stable total adjusted error +2.7V to +5.5V operation Packaging: small TSSOP-16 Applications Bridge sensors Remote 4-20mA transmitters Strain, load, weight scales Automotive sensors
The OPA334 and OPA335 CMOS op amps use auto-zeroing techniques to simultaneously provide very low offset voltage and near-zero drift over time and temperature. These high-precision amps offer high input impedance and rail-to-rail output swing. New, OPA333 available 1Q 2006. Key Features Low offset voltage: 5V (max) Zero drift: 0.05V/C (max) Quiescent current: 285A Packaging: SOT23-5, SOT23-6, SO-8, MSOP-10 (dual) Applications Transducer applications Electronic scales Temperature measurement
VEX R1 +5V R R R R OPA335
VOUT
VS
VEXC
psi
Linearization Circuit
Ref Linearization DAC
R1 VREF
50
Non-Linear Bridge Transducer
Analog Sensor Linearization
OPA335 5V supply bridge amplifier.

Linear VOUT
Fault Monitor
Auto-Zero PGA
Over/Under Scale Limiter Analog Signal Conditioning
Digital Temperature Compensation Ext Temp
DIGITAL CAL Int Temp Temp ADC Control Register Interface Circuitry EEPROM (SOT23-5)
Ext Temp
PGA309 functional block diagram.

Pressure
Fastest Cycling/Lowest Latency 24-Bit ADC
ADS1258
Get samples, datasheets, EVMs and app reports at: www.ti.com/sc/device/ADS1258
24-Bit, ADC with Excellent AC and DC Performance

ADS1271
Get samples, datasheets, EVMs and app reports at: www.ti.com/sc/device/ADS1271
The ADS1271 is a 24-bit, delta-sigma ADC with up to 105kSPS data rate. It offers the unique combination of excellent DC accuracy and outstanding AC performance. The high-order, chopper-stabilized modulator achieves very low drift with low in-band noise. The onboard decimation filter suppresses modulator and signal out-of-band noise. The ADS1271 provides a usable signal bandwidth up to 90% of the Nyquist rate with only 0.005dB of ripple. Key Features AC performance: SNR: 109dB Bandwidth: 50kHz THD: 105dB DC accuracy: Offset drift: 1.8V/C Gain drift: 2ppm/C Only 35mW dissipation in low-power mode Applications Ideal for vibration/modal analysis, acoustics, dynamic strain gages and pressure sensors
VREFP VREFN AVDD Control Logic DVDD SYNC/ PDWN MO DE CLK AINP AINN ADS1271 AGND DGND DRDY/ FSYNC SCLK DOUT DIN FORM AT
The ADS1258 is a 16-channel, 24-bit delta-sigma ADC. The flexible multiplexer with external access allows the inclusion of a common gain stage prior to the ADC input. On-chip temperature, supply and reference monitors help to ensure system integrity with very low conversion latency of any 42s which enables channel cycling at 23.7kSPS. Key Features Data rate: 125kSPS Only 42s latency: Channel cycle at 23.7kSPS Measure all 16 inputs in <672s Performance: 12V RMS noise at 23.7kSPS cycling Offset drift: 0.02V/C Gain drift: 0.04ppm/C Flexible multiplexer structure: 16 single-ended or 8 differential inputs External access for common gain stage Auto-scan for low software overhead Single or dual-supply operation: Analog: single 5V or 2.5V Digital: 2.7V to 5V Applications High-speed, multiple-sensor data acquisition Fast scanning of pressure, strain gage, temperature, +5V current/voltage inputs
VREFP AVDD ADS1258
M odulator
Digital Filter
Serial Interface
8 Differential Inputs or 16 Single-Ended Inputs
M U X
ADC
24-Bit,
ADS1271 block diagram.
+5V
OPA2335
OPA2335
ADS1258 functional block diagram.

Pressure
Device Recommendations
Device Description Key Features Miniature 24V DC/DC Converter with 1500V Galvanic Isolation, Integrated 5V LDO Benefits Other TI Solutions TPS54xx SWIFTTM Family, Highest Efficiency DC/DC Converter w/Integrated FET LM317, Lowest Cost LDO with 37V Input ADS1218, Core of MSC121x Family with Additional Flash MSC1200, Low-Cost Version without DACs PCM4202, PCM4204
Power Management Products

DCP012405B 1W/5V DC/DC Converter Fully Integrated DC/DC Converter in a Miniature Package, High Isolation and Regulated Output, Smallest Height in the Industry Adjustable LDO, Ultra-Low Quiescent Current 3.5A to 50mA Excellent for Low-Power Applications up to 1.2V
TPS71501
LDO: 24V/1.2V to 15V
Data Converters
ADS1256 ADS1258 MSC121x 24-Bit ADC 24-Bit, 16-Channel ADC 8051-Based MCU with ADS1218 Converter Including Flash Memory 24-Bit, 105kSPS ADC 24-Bit ADC, Input Buffer, PGA, Digital I/O 24-Bit ADC, 125kSPS Data Rate 24-Bit ADC, Filters, PGA, Digital I/O, Sensor Excitation, Burn-Out Current Sources, Offset DACs, Four 16-Bit DACs, Temperature Sensor Low Offset Drift: <1.8V/C, Passband Ripple <0.005dB, THD <105dB Small Package, High Initial Accuracy, Low Drift Small Package, Excellent Low Drift Performance Highest Resolution (23 Bits Noise-Free) and Lowest Input NoiseUp to 30kSPS Flexible Multiplexer Structure, On-Chip Temperature Lowest Noise and Highest Integration in the Market, Includes All Necessary External Circuitry All-in-One Solution 24-Bit ADC with DC Accuracy Plus AC Performance at Highest Speed up to 105kSPS 15ppm/C Stable Reference for Precise Data Conversion
ADS1271
References
REF3125/30/ References 33/40 REF3212/20/25 References 30/33/40 REF30xx with Max 50ppm/C Drift 4ppm/C, 100A, 4-Wire Connection, Portable Applications REF31xx
Amplifiers
OPA335 INA326 XTR115 PGA309 Zero-Drift Op Amp High-Precision Instrumentation Amp 4-20mA Transmitter Including Sensor Excitation Programmable Pressure Sensor Conditioner Digital Temp Sensor CMOS 0.05V/C Drift, 5V Offset, RRIO at 3.3VDC, Single Supply Single Supply 30nV/ Hz Noise, RRIO, CMOS Includes All Functions to Generate 4-20mA Output Signal and Bridge Excitation Includes Sensor Excitation, Linearization and TemperatureCompensated Conditioning, ADC, DAC, Temp Sensor Integrated Temp Sensor, ADC and SPI Interface to Convert Valve Temp into Digital Code Interfaces PROFIBUS Fieldbus to System Controller Interfaces CAN-Fieldbus to System Controller Best Long-Term Stability for Industrial Use, Single Supply, Best in Class, Automotive Temp Range Low Noise, Excellent Long-Term Stability, Dual Supply Not Required Lowest Cost All-in-One Solution (<$1) Up to 36V Supply Voltage, no Need for DC/DC Converter Fully Integrated Sensor Conditioning System On a Chip (SOC), Small Package, Only 16-Bit ASSP on the Market High Resolution and Accuracy, Extended Industrial Temperature Range, SOT-23 package Optimized for PROFIBUS, Up to 160 Users per Bus, Up to 40Mbps Improved Drop-In Replacement for PCA82C251, Tolerates 200V Transients Reduces Heat in Sensor System, Reduces Cost of Power Source and Increases Lifetime OPA735, 12V Version with Improved Noise and Drift INA337, Automotive Temp Range, 40C to +125C XTR110 is Intended for 3-Wire Output XTR108, Similar but is Targeted for PT100, Temp Sensors Included, 4-20mA Transceiver TMP175 (SMB-Bus Interface) SN65HVD485E, Low-Cost Version SNHVD233 (3.3V Version) MSP430Cxx without Flash , Even Lower Power
TMP121
Interface
SN65HVD1176 PROFIBUS Transceiver SN65HVD251 CAN-Bus Transceiver
Processor
MSP430F1121 16-Bit MCU with Flash Lowest Power MCU in the Industry, 6s Wake-Up

Weigh Scales
Complete, High-Precision Weigh Scale Solution
ADS1232, ADS1234
Get samples, datasheets and app reports at: www.ti.com/sc/device/ADS1232, www.ti.com/sc/device/ADS1234
Electronic weigh scales are found in many industrial applications in some shape or form and are ubiquitous in todays food industry. Manufacturers of electronic weigh scales traditionally choose proprietary ASICs to tailor the performance of their analog front end for highest accuracy and stability. The diagram below shows an approach using standard products offering up to 23 noise-free bits of resolution. A major challenge in designing weigh scales is the sampling of multiple load cells while offering extremely low input referred noise (RTI). The ADS1256 and ADS1232 offer input referred noise of 30nV and 17nV, respectively. Another important factor is the analog circuitrys long-term stability with regard to offset drift and gain. Here the accuracy of the amplified input signal, either single-ended or differential, must be guaranteed over years of operation. Auto-zero amplifiers, such as the OPA335 and the INA326 instrumentation amplifier, meet these stringent requirements by achieving offset drifts of 0.05V/C (OPA335) and 0.4V/C (INA326). For an easy-to-use solution, the MSC1210 family offers a complete data acquisition system on a chip comprised of: An optimized 8051 core, (3-times faster than standard version at same power) A 24-bit, ADC with 22 ENOBs and 75nV (RTI) A PGA with gain steps from 0 to 128 2kB boot ROM and up to 32kB Flash memory
Resistors, Capacitors Memory Crystal
Load Load Cell Load Cell Load Cell
The ADS1232 and ADS1234 are designed as highly integrated deltasigma ADCs for low-level, high-precision measurements, especially for weigh scale applications. The devices are comprised of a low-drift, low-noise instrumentation amplifier and a high-order, chopper-stabilized modulator followed by a digital filter in a monolithic device. Selectable gains of 1, 2, 64 or 128 allow full-scale differential input ranges of 2.5V to 19.5mV with a +5V reference. They also include a low-drift onboard oscillator as well as external crystal oscillator for the precise output data rate to reject both 50Hz and 60Hz simultaneously. ADS1232 and ADS1234 output data at 105SPS or 80SPS and are the ideal choice for weigh scale as well as bridge sensor applications. Key Features Complete front-end solution for weigh scales Very low noise PGA: Only 17NV input-referred noise with gain of 128 High performance ADC: 23.5 effective bits with gain of 1 Onboard low-drift oscillator with optional external clocking Excellent 50Hz and 60Hz rejection: 100dB (min) Packaging: ADS1232: 24-lead TSSOP ADS1234: 28-lead TSSOP Applications Weigh scales Bridge sensors Strain gauges Pressure sensors
AVDD CAP REFP REFN DVDD GAIN [1:0] AINP1 AINN 1 AINP2 AINN 2 AINP3 AINN 3 AINP4 AINN 4 Input M ux A = 1, 2, 64, 128 PGA
ADC
Keypad LCD
1 4 7 2 5 8 3 6 9
Cell
Amp Optional Battery Lead Acid 4A-H
Amp
Analog Filter
ADC
MSP430
LDO Reg. 3.3V LDO Reg. 5V
PROFIBUS ASIC SPC3 Isolation SN65HVD1176 PROFIBUS Transceiver PROFIBUS
PDWN DRDY / DOUT

MSP430
Basic weigh scale application.
SCLK Internal Oscillator External Oscillator A1/T EM P1 A0 AGND CAP XTAL1 XTAL2 DGND / CLKIN NOTE: A1 for ADS1234, TEM P for ADS1232 SPEED
ADS1234 Only
Weigh scale application using ADS1232.

Weigh Scales
Device TPS76301 Description Low-Power 150mA, Low-Dropout (LDO) Linear Regulator Zero-Drift Op Amp High-Precision Instrumentation Amp Programmable Pressure Sensor Conditioner 24-Bit, 30kSPS ADC w/Multiplexer 24-bit, 80SPS, ADC PROFIBUS RS-485 CAN-Bus Transceiver Key Features Regulates 6V to 3.3V and 5V Benefits Small Package Other TI Solutions TPS76333
Amplifiers
OPA335 INA326 PGA309 0.05V/C Drift, 5V Offset, RRIO at 3.3VDC Single Supply Best Long-Term Stability for Industrial Use, No Need for Dual Supply, Best in Class, Automotive Temp Range 30nV/ Hz Noise, RRIO, Single Supply Lowest Noise in Industry and Best Long-Term Stability, No Need for Dual Supply Includes Sensor Excitation, Linearization and Temperature- Fully Integrated Sensor Conditioning System On a Chip Compensated Conditioning, ADC, DAC, Temp Sensor (SOC), Small Package, Only 16-Bit ASSP on the Market, Included 4-20mA Transceiver Very Low Noise ADC with Programmable Data Rates Up to 30kSPS Very Low Noise PGA, 24-Bit ADC, Onboard Oscillator Optimized for PROFIBUS, 2.1V min., VOD Low Bus Cap. Interfaces CAN-Fieldbus to System Controller Higher Data Rates, Very Low Noise Complete Front-End Solution for Weight Scales OPA735, 12V Version of OPA335 INA337, Automotive Temp Range 40C to +125C XTR108, Similar but is Targeted for PT100, Temp Sensors MSC1210 ADS1244/5
Data Converters
ADS1256 ADS1232
Interface
SN65HVD1176 SN65HVD251 Improved Signal Fidelity and Enhanced Transmission Reliability SN65HVD05 Improved Drop-In Replacement for PCA82C251, SNHVD233 Tolerates 200V Transients Low-Power, Integrated LCD Driver and Flash MSP430F417
Processor
MSP430F413 16-Bit, Ultra-Low-Power 8kB Flash, 256 RAM, Comparator, 96 Segment LCD controller
10

Temperature
sensitive to contamination. Improved film isolation and packaging have since eliminated these problems making thin-film platinum RTDs the first choice over wire-wounds and NTC thermistors. NTC Thermistors are composed of metal oxide ceramics, are low cost, and the most sensitive temperature sensors. They are also the most nonlinear and have a negative temperature coefficient. Thermistors are offered in a wide variety of sizes, base resistance values, and Resistance vs. Temperature (R-T) curves are available to facilitate both packaging and output linearization schemes. Often two thermistors are combined to achieve a more linear output. Common thermistors have interchangeabilities of 10% to 20%. Tight 1% interchangeabilities are available but at costs often higher than platinum RTDs. Common thermistors exhibit good resistance stability when operated within restricted temperature ranges and moderate stability (2%/1000 hr at 125C) when operated at wider ranges. Low-Cost PT100 Linearization Circuit for 0C to 400C A low-cost RTD measurement circuit with linearization is achieved with just one dual operational amplifier, OPA2335, and seven resistors. The first stage linearizes a PT100 sensor over a temperature range from 0C to 400C, yielding a maximum temperature error of 0.08C. R1 defines the initial excitation current of the RTD. R3 and R4 set the gain of the linearization stage to ensure the input of A1 stays within its common-mode range. Rising temperature increases VO1. A fraction of VO1 is fed back to the input via R2 for linearization. Resistors, R1 R4, are calculated so that the maximum excitation current through the RTD is close to 100V to avoid measurement errors through self-heating.
VS = 5V R2 R1 3.57k 10.928k VO1 A2 R5 37k 1/2 OPA2335
Temperature is the most frequently measured physical parameter and can be measured using a diverse array of sensors. All of them infer temperature by sensing some change in a physical characteristic. Three of the most common types are Thermocouples, Resistance Temperature Detectors (RTDs), and NTC-Thermistors.
Thermocouple RTD Thermistor
Resistance
Temperature
Temperature
Resistance
Voltage
Temperature
Common types of thermocouples, RTDs and NTC-thermistors.
Thermocouples consist of two dissimilar metal wires welded together to form two junctions. Temperature differences between the junctions cause a thermoelectric potential (i.e. a voltage) between the two wires. By holding the reference junction at a known temperature and measuring this voltage, the temperature of the sensing junction can be deduced. Thermocouples have very large operating temperature ranges and the advantage of very small size. However, they have the disadvantages of small output voltages, noise susceptibility from the wire loop, and relatively high drift. Resistance Temperature Detectors (RTDs) are wire winding or thin-film serpentines that exhibit changes in resistance with changes in temperature. While metals such as copper, nickel and nickel-iron are often used, the most linear, repeatable and stable RTDs are constructed from platinum. Platinum RTDs, due to their linearity and unmatched long-term stability, are firmly established as the international temperature reference transfer standard. Thin-film platinum RTDs offer performance matching for all but reference grade wire-wounds at improved cost, size and convenience. Early thin-film platinum RTDs suffered from drift, because their higher surface-to-volume ratio made them more
A1 1/2 OPA2335 R3 37.4k R4 5.05k
RTD
Comparison of Temperature Sensor Attributes

Criteria Cost-OEM Quality Temperature Range Interchangeability Long-Term Stability Accuracy Repeatability Sensitivity (Output) Response Linearity Self Heating Point (End) Sensitive Lead Effect Size/Packaging Thermocouple Low Very Wide 450F to +4200F Good Poor to Fair Medium Poor to Fair Low Medium to Fast Fair No Excellent High Small to Large RTD High Wide 400F to +1200F Excellent Good High Excellent Medium Medium Good Very Low to Low Fair Medium Medium to Small Thermistor Low Short to Medium 100F to +500F Poor to Fair Poor Medium Fair to Good Very High Medium to Fast Poor High Good Low Small to Medium
R7 14.447k R6 23.7k
OPA2335 PT100 linearization circuit.

0.08 0.06 Temperature (C) 0.04 VOUT (V) 0.02 0.0 0.02 0.04 0.06 0.08 0 50 100 250 150 200 Temperature (C) 300 350 400 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 50 100 150 200 250 Temperature (C) 300 350 400 VOUT1 VOUT2
temp vs. temp.
VOUT vs. temp.

Temperature
The second stage performs offset and gain adjustment. Here the linear slope of VO1 is readjusted to provide a VO2 slope of 10mV/C within an output range of 0.5V to 4.5V. Temperature Measurement of a Remote 3-Wire RTD via a 4-20mA Current Loop This circuit measures the temperature of a remote 3-wire RTD using the 4-20mA current transmitter, XTR112. The device provides two matched current sources for RTD excitation and line-resistance compensation. Internal linearization circuitry provides 2nd-order correction to the RTD, thus achieving a 40:1 improvement in linearity. IR1 is the excitation for the RTD. IR2 is the compensation current flowing through RZ and RLINE1. By choosing the value of RZ to be equal to the RTD resistance at minimum temperature, the internal instrumentation amplifier (INA) only measures the temperature dependent difference in RTD resistance. RCM is used to provide an additional voltage drop to bias the inputs of the XTR112 within the common-mode input range. The 0.01F bypass capacitor minimizes common-mode noise. RG sets the gain of the INA. For 2nd-order linearization, a fraction of the INA output voltage is fed back via the resistors, RLIN1 and RLIN2. Internally, the output voltage is converted into a current and then added to the return current, IRET, to yield an output current of IO = 4mA + VIN 40/RG. On the current-loop side, transistor, Q1, conducts the majority of the signal-dependent 4-20mA loop current. This isolates most of the power dissipation from the internal precision circuitry of the XTR112, maintaining excellent accuracy. For detailed information on the calculation of the resistor values for various temperature ranges, refer to the XTR112 data sheet. Temperature Measurement with a K-Type Thermocouple Using Wired Cold-Junction Compensation (CJC)
11
This thermocouple measurement circuit uses the auto-zero, singlesupply amplifier, OPA335. A precision voltage reference, REF3040, provides the 4.096V bridge supply. The forward voltage of diode, D1, has a negative temperature coefficient of 2mV/C, and provides the cold-junction compensation via the resistor network R1 to R3. The zero4.096V +5V 0.1F + R1 6.04k R5 31.6k R8 150k REF3040
D1
+5V 0.1F +
R2 2.94k
R2 549 OPA335 Zero Adj. VO
+ + K-Type Thermocouple 40.7V/C
R6 200 R4 6.04k R3 60.4
OPA335 temperature measurement circuit.
VLIN RLIN1(1) RLIN2(1)

+ VIN
IO IR1 IR2 VREG
V+
RG RG
(1)
XTR112 XTR114 RG
VIN
Q1
E IO
EQUAL line resistances here creates a small common-mode voltage which is rejected by XTR112 and XTR114. 2
IRET RZ IO
1 RCM
(RLINE2)
(RLINE1)
NOTE: (1) Provides predictable output current if any one RTD connection is broken: XTR112 XTR114 IO 1mA 27mA 1mA Q2(1) 2N2222 OPEN RTD TERMINAL 1 2 3
RTD
IO 1.3mA 27mA 1.3mA
Resistance in this line causes a small common-mode voltage which is rejected by XTR112 and XTR114.
(RLINE3) 3
Temperature measurement of a remotely located RTD.
12

Temperature
Integrated Current Sources Allow for Sensor Burn-Out Detection In the case of remotely located thermocouples, input RC low-pass filters remove differential and common-mode noise, which might have been picked up by the thermocouple leads running through a noisy environment. For the various types of thermocouples, different PGA settings may be required to reduce the analog input impedance. Low input impedance can cause compensation current to flow through a thermocouple. These currents disturb electron density (which the Seebeck effect is based on) thus generating wrong thermo-EMF readings at the thermocouple output. To provide consistently high input impedance, the input buffer must be enabled. This however reduces the input common-mode range to 50mV above analog ground and 1.5V below the positive analog supply. To ensure that the thermocouple signals are within that range, each input is biased via a 10k to 100k resistor. The bias voltage is provided by the precision voltage reference circuit, REF3112, which has an initial error of 0.2% and a temperature drift of 15ppm/C. Cold-Junction Compensation Cold-junction compensation (CJC) is performed by reading the output voltage across a linearized thermistor circuit via AINCOM.
adjustment for a defined minimum temperature is achieved via R6, while R7 and R8 set the gain for the output amplifier. The OPA335 provides a high DC open-loop gain of AOL = 130dB, allowing 16-bit+ accuracy at high gain in low-voltage applications. The auto-zero operation removes the 1/f noise and provides an initial offset of 5V (max) as well as an extremely low offset drift over temperature of 0.05V/C (max). Thus the OPA335 ideally suits single-supply, precision applications where high accuracy, low drift and low noise are imperative. Autonomous Temperature Measurement System for Multiple Thermocouples Using MSC1200 This temperature measurement system measures the differential output voltage of four different types of thermocouples, (TC1TC4), and one reference temperature using the mixed-signal controller, MSC1200. The MSC1200 incorporates a ADC with 22-bits of effective resolution, with a versatile input multiplexer, a selectable input buffer, and a programmable gain amplifier (PGA) with gain adjustments from 1 to 128. The device includes on-chip Flash and SRAM memory and an improved 8051-CPU, running 3-times faster than the initial standard version at the same power consumption. An on-chip current digital-toanalog converter, (I-DAC), provides excitation current to the RTDs and thermistors.
Multi-channel temperature measurement system.

Temperature
The versatility of the input mux allows assigning the positive and negative inputs of the buffer to any of the analog input pins. Thus, to measure the reference temperature differentially, one buffer input is connected to AINCOM, while the other input is connected to the lowend input of any of the thermocouples (AIN1, 3, 5 or 7). However, once an input has been selected, all subsequent differential measurements of the reference temperature should be made against the same low-end input. If the MSC1200 is close to the isothermal block, and based on the required accuracy, the on-chip temperature sensor could be used for CJC. Constant Temperature Control for Thermoelectric Coolers with INA330 The INA330 is a precision amplifier designed for thermoelectric cooler (TEC) control in optical networking and medical analysis applications. It is optimized for use in 10k thermistor-based temperature controllers. The INA330 provides thermistor excitation and generates an output voltage proportional to the difference in resistances applied to the inputs. It uses only one precision resistor plus the thermistor, thus providing an alternative to the traditional bridge circuit. This new topology eliminates the need for two precision resistors while maintaining excellent accuracy for temperature control applications. The INA330 offers very low 1/f noise throughout the life of the product. The low offset results in a 0.009C temperature error from 40C to +85C. An excitation voltage applied to the inputs, V1 and V2, creates the currents, I1 and I2, flowing through the thermistor (RTHERM) and the precision resistor (RSET). An on-chip current-conveyor circuit produces the output current, IO = I1 I2. The output current, flowing through the external gain-setting resistor (RG) is buffered internally and appears at the VO pin. Any bias voltage applied to the other side of RG adds to the output voltage, so that VO = IO RG + VADJUST. This output voltage feeds a PID controller, which provides the input voltage to a TEC driver in bridge-tied-load configuration. The two operational amplifiers (OPA569) are CMOS, single-supply power amplifiers capable of driving load currents of up to 2A at 3V supply.
+5V(2) Enable +5V C1 R2 PID C2 R4
13
In this application, the temperature to be controlled is set by the DAC. If the temperature of the TEC rises above the set temperature, TEC current flows in one direction for cooling. If the temperature falls below the set-point, the current direction is reversed and the TEC heats. The dotted line indicates closed-loop thermal feedback from the TEC to the thermistor, which it is mechanically mounted to, but electrically isolated from. Constant Temperature Control for Thermoelectric Coolers with INA326 The INA326 is a high-performance, low-cost, precision instrumentation amplifier with rail-to-rail input and output. Its a true single-supply instrumentation amplifier with very low DC errors and input common-mode ranges that extend beyond the positive and negative rail. These features make it suitable for general-purpose to highaccuracy applications. Excellent long-term stability and very low 1/f noise assure low offset voltage and drift. The INA326 is a two-stage amplifier with each gain stage set by R1 and R2, respectively. Overall gain is described by the equation: G = 2 R2/R1. The INA326 measures the difference between the voltage of the temperature set-point (R7), and the voltage across the thermistor (RTHERM). The differential input voltage is amplified by a factor of 100 (G = 2 100k/2k) and fed, via an RC-lowpass filter into the PID controller. R14, C7 is an output filter that minimizes auto-correction circuitry noise. The PID controller shown uses separate adjustment stages, allowing for optimized adjustment of controller parameters to the closed-loop system. Once these parameters have been determined, the existing circuitry consisting of five op amps for PID, summing and loop-gain adjustment can be converted into a single amplifier PID controller.
TEC DRIVER AMPLIFIER OPTIONS OPA569 DRV591 DRV593 DRV594 ADS7820 2A Linear Amplifier 3A PWM Power Driver 3A PWM Power Driver 3A PWM Power Driver Complete multichannel TEC control Analog Front End includes ADC, DAC and INA 3.3V 10k 10W
VREF(1) +5V
4k 1V(1) 1k INA330 I1 VBIAS(1) 2.5V Thermistor RSET = 10k I2 RSET 10k 10k IO = I 1 I 2 VREF(1) +5V +5V V1 VO
V2
R1
R3
C3
3.3V
10k +
OPA348
10k
10k
OPA569
TEC
OPA569
Cooling
10k
CFILTER 500pF
RG 200k
VREF(1) = +5V
D/A Converter VADJUST = 0V to 5V = 2.5V at 25C Set-Point
Temperature Adjust
NOTES: (1) Ratiometrically derived voltages. (2) The INA330 can also use a 3.3V, supply; however, components must be chosen appropriate to the smaller output voltage range. indicates direction of voltage change for rising temperature at the thermistor.
INA330 in TEC application.
14

Temperature
INA326 PID controller.
Digital Temperature Sensors with Two-Wire Interface

TMP75, TMP175
Get samples, datasheets and app reports at: www.ti.com/sc/device/TMP75, www.ti.com/sc/device/TMP175
Temperature 1 Diode Temp. Sensor Control Logic 8
The TMP75 and TMP175 are two-wire, serial-output temperature sensors. The devices require no external components and are capable of reading temperatures with a resolution of 0.0625C. The two-wire interface is SMBus compatible, which allows the TMP175 to have up to 27 devices on one bus and the TMP75 eight devices. Both feature SMBus alert functions and are ideal for extended temperature measurements found in industrial environments. Key Features 27 addresses (TMP175) 8 addresses (TMP75) Digital output: two-wire serial interface Resolution: 9- to 12-bits, user selectable Accuracy: 1.5C (max) from 25C to +85C 2.0C (max) from 40C to +125C Low quiescent current: 50A, 0.1A standby Wide supply range: 2.7V to 5.5V Packaging: SO-8, MSOP-8 Applications Power-supply temperature monitoring Computer peripheral thermal protection Thermostat controls Environmental monitoring and HVAC Electromechanical device temperature Industrial Solutions Guide
SDA
V+
SCL
2 A/D Converter Serial Interface
A0
ALERT
A1
GND
OSC
Config. and Temp. Register
A2
TMP175, TMP75
TMP175 functional block diagram.

Flow Metering
The application requirements of flow measurement in industrial settings varies from low cost to very high precision and fast flow metering found in petrochemical and pharmaceutical plants. This section contains explanations of the most common techniques and offers various solutions for overcoming flow measurement obstacles.
15
The Coriolis Flowmeter

The coriolis flowmeter consists of a tube, which is forced into oscillation by a low-frequency power driver. Liquid particles flowing through the tube are deviated by the mechanical oscillation of the tube. These deviations are different in their signs, depending on their distance to the position of the power source. Close to the power source, the particles of the liquid are accelerated. In the area of the mechanical sensors the particles are decelerated. In the coriolis flow meter, the mechanical forces (which are decelerating) are measured/detected by inductive sensor systems. The very low resulting voltages are amplified by precision amplifiers and then digitized. The phase difference between the basic oscillation of the tube and the resulting inductive sensor signal describes the amount of mass-flow in the tube. As the detected voltages are very low, a low-noise precision amplifier in the sensor front-end is required. For digitizing the measurement signal, a 2-channel precision ADC () is needed as the phase-accuracy between the two channels has a direct impact on the measurements accuracy. Differences Between the Two Measurement Techniques
The Magnetic-Inductive Flowmeter

The magnetic-inductive flowmeter consists of a non-ferromagnetic tube wrapped with a magnetic coil. Electrodes in the tubes inner isolated surface are in contact with the liquid (must be conductive) that flows through the tube. The coils around the pipe generate a magnetic field within the tube. The magnetic field inducts a voltage in the liquid, which is proportional to the speed of the liquid in the tube. This voltage is measured via the electrodes. As the measured voltage is very low, precise low-noise instrumentation amplifiers, such as the INA103, options are needed at the amplifier front end. Usually the voltage is digitized with precision ADCs such as the ADS1252.
INA103
ADS1252
The magnetic inductive system can only measure the liquids speed through the tube. As the diameter of the tube is known, the volume of flow can be calculated. The liquid must have minimal electrical resistance. Non-conductive liquids cant be measured. The coriolis technique makes it possible to actually measure the amount of mass flowing through the tube. This technique is more expensive.
Power Driver
The magnetic-inductive flowmeter.

INA103 ADS1244
Y-Axis Flux Density
Z-Axis Voltage E Between
Power Driver INA103 ADS1244
The coriolis flowmeter.
The principle of the magnetic flowmeter.
X-Axis
Magnetic Flow Detector Flow Tube Induced Induced Motion Twisting
Magnetic Detector
Tube Twist
Operational principle of a coriolis mass flowmeter.
16

Flow Metering
High-Precision Method:
Low-Cost Method:
SIFCH1 N S SIFCH0
Gal Total
N SIFCOM 3V
TPS7701 functional block diagram.
VCC RST
Sx,COMx MSP430FW427 XIN XOUT
Ultra-low-power MSP430 requires <10mA for the complete metering application No power transformers required for power supply management Simple capacitor-tapped power supply coupled with an LDO
d S2
Sensor S1 Sensor S2
Flow
VSS
32,768Hz
Scan I/F SIFCH2 SIFCH1 SIFCH0 SIFCH3 SIFCH2 SIFCH1 SIFCH0 SIFCOM
JTAG Px.x TimerA5 TimerA3 AMR Ready
S1
a a S2
S1
b b S2
S1
c c S2
S1
d d S2
S1
a d S2
S1
b b
SIFCOM
MSP430FW427 single-chip flow meter.

Clockwise Anti-clockwise
Quadrature decoding, detect rotation, direction error detection.
Two LC sensors or one GMR sensor are used (S1, S2) State machine in scan I/F enable to detect rotation, error and distortion
Quadrature decoding example: Generation of an input signal with the two LC-type sensors, S1 and S2, are used. If the previous position of the damped plate is known, together with the current state, the rotation as well as the direction of rotation can be detected. For the digital signals, a 0 means the sensor is above the undamped part of the plate and 1 means it is above the damped area, the metal part. Additional sensors can be used for redundancy, but two sensors are sufficient to detect rotation and direction.
Small battery meets life-cycle of 2 calibration periods due to scan I/F Various sensors and physical conditions are handled Performance for additional functions e.g. automatic meter reading at low power
Device Description Voltage Reference Key Features Drift = 20ppm/C 4.097V, 0.2% Isolation Converter, +5VIN, 15VOUT Isolation Converter, +5VIN, 5VOUT Adjustable Output (0.9V-3.3V), 1.5A Power = 2mW, 8-pin, SFDR = 86dB Small (8-Pin SSOP) and Easy to Use (Read Only Interface) AC Performance, DC Accuracy 8051 MCU with Integrated 24-Bit Up to 1kSPS ADC, 16-Bit DACs and Precision Reference, Eight Inputs and PGA Benefits Very Low Drift, Tiny Package Low Noise, Small Board Data Low Noise, Small Board Data Very Easy to Use, Flexible Output Excellent Performance Only 7.5mW, Single 5V Supply Measure Up to 50kHz Bandwidths, Easy to Synchronize Multiple Converters Cost Effective and Highest Integration All in a Single-Chip Solution Other TI Solutions REF02, REF102 DCP10515 DCP10505 TPS64200 ADS8320, ADS8325 ADS1252 PEM4202 MSC1212, MSC1200
Reference
REF3140
Isolation Products
DCV010515D Dual Converter DCV010505D Dual Converter

TPS54110 ADS8321 ADS1251 ADS1271 MSC121x SWIFTTM Buck Controller 16-Bit, 100kSPS 24-Bit, 20kSPS 24-Bit, 105kSPS 24-Bit ADC, MCU, REF DAC, PGA
Data Converters

Linear Voltage Differential Transformer
Hydraulic valves are used to direct the flow of liquid mediums, most commonly oil, from input ports to output ports. The direction of flow is determined by the position of a spool, which is driven by a linear force motor. Valve electronics are split into three core-subsystems: Power Conversion provides galvanic isolation between the valve power and the external fieldbus and auxiliary 24V supplies. It also provides regulated supply voltages to the individual functional blocks. Fieldbus Interface and Control provides galvanic isolation between the system controller and the fieldbus signals. The system controller translates the incoming data from the fieldbus into valve commands for the DSP, and vice versa, it translates the valve data from the DSP into fieldbus signals. Valve Control performs spool positioning, pressure and temperature measurement. It also indicates alarm conditions. The valve controller receives a position command from the fieldbus via the system controller and drives the linear force motor until the output signal of the position sensor (LVDT = Linear Variable Differential Transformer) equals the input value of the position command. At the same time, pressure and temperature are monitored. An alarm condition is indicated if one of these sensors exceeds a pre-determined safety value.
R12
5V Dual SVS Dual LDO Isolated 5V DC/DC Isolated 24V DC/DC 24VDC nom (15V-35V) Fieldbus
17
1.8V 3.3V 1.8V 3.3V System and Valve Controller Supply Voltage and Supervision
5V +5V LVDT Drive and Analog Supply
+15V 15V Motor Drive Supply
System Controller (FPGA or C)
Signal Isolation
Fieldbus XCVR
LPF
Motor Drive LVDT Drive
LPF Valve Controller and Conditioner (DSP) LVDT Sense
Temp Sensor LVDT
Valve Mechanics
SPOOL XDCR Sense Pressure XDCR T A P B
Linear Force Motor
Valve Electronics
Basic hydraulic valve diagram.
CIN VPWM
R11
R13
C11
1/4 TLV2474
CCM RS
5V
C22 5V
C12
RGD L1 RFD
1/4 TLV2474
L2A CDIFF L2B RS
RD/2 RGI INA118 (G=10) VREF
R21
R22
1/4 TLV2474
RD/2
C21
VADC
5V CCM VICM = 3V REF3130
1/4 TLV2474
Device UCC3823 DCR010505 TPS70751 TPS3305-18 Description PWM Controller 1W/5V DC/DC Converter Dual LDO: 3.3V/1.8V Dual SVS: 3.3V/1.8V Key Features
DSP-controlled, single-supply, LVDT conditioner circuit.

Benefits Lowest Cost, Small Package Fully Integrated DC/DC Converter in Miniature Package, High Isolation and Regulated Output Industry's Most Integrated Supply Systems, with Power Good Indicator, UVL and Thermal Shutdown Requires No External Capacitors, Temp-Compensated VREF, Small Package Other TI Solutions UCC3813, TL5001 DCP020505 (2W, Unregulated) TPS70851, TPS70251 TPS3306-18, TPS3806I33

Universal PWM Controller for 24V, Isolated Boost Converter Miniature 5V DC/DC Converter with 100V Galvanic Isolation, Integrated 5V LDO Two Regulated Output Voltages for DSP Split-Supply Systems with Power-Up Sequencing, 250mA Output Current Dual Supervisory Circuit for DSP and Processor Supplies Including POR Generator
Amplifiers
OPA4345 TLV2472 INA118 OPA544 PGA309 TMP121 DRV1xx Quad, Low-Power Op Amp Dual, Single-Supply, High O/P Drive Single/Dual Supply Inst. Amp Power Amplifier Programmable Pressure Sensor Conditioner Digital Temp Sensor Used as Active Low-Pass Filter to Convert PWM into Analog Signal Low Power, Low Offset, Small Package, Low Cost Drives LVDT Sensor with 25mA No Cross-Over Distortion in BTL Configuration, Lowest Supply Voltage, Drives Up to 35mA Senses LVDT Output with High Linearity High Linearity at Lowest Supply Voltage Drives Linear Force Motor (10V/1A) Class AB amp with Current Limit and Thermal Shutdown Includes Sensor Excitation, Linearization and TemperatureFully Integrated Sensor Conditioning System on a Compensated Conditioning Chip (SOC), Small Package Integrates Diode Temp Sensor, ADC and SPI Interface to High Resolution and Accuracy, Extended Industrial Convert Valve Temp into Digital Code for the DSP Temp Range, Ultra Small Package Low-/High-Side Monitoring Fixed/Adjustable Switching Frequency , 1.2A Output, Wide Supply Ideal for Driving Electromechanical Devices Interfaces PROFIBUS Fieldbus to System Controller Interfaces CAN Fieldbus to System Controller OPA4340, OPA4346 TLC074, TLC084 INA128 OPA548, OPA549, OPA569 TMP175 (SMBus Interface) DRV590, DRV591
Interface
SN65HVD1176 PROFIBUS Transceiver SN65HVD251 CAN-Bus Transceiver Optimized for Bus, Up to 160 Users Per Bus, Up to SN65HVD485E 40Mbps, Benchmarked by Siemens as Reference Device Improved Drop-In Replacement for PCA82C251, SNHVD233 Tolerates 200V Transients (3.3V Version)
18

Current Measurement
Current Shunt Monitor with 16V to +80V Common-Mode Range
INA193, INA194, INA195, INA196, INA197, INA198
Get samples and datasheets at: www.ti.com/sc/device/PARTnumber (Replace PARTnumber with INA193, INA194, INA195, INA196, INA197 or INA198)
Current is one of the most common values measured in industrial applications. The Motor Control chapter (pages 20-23) describes precise current measurement using delta-sigma modulators and precision SAR ADCs that also require galvanic isolation. Another approach to directly measuring current uses instrumentation amplifiers which allow direct shunt measurements with common-mode voltages up to 60V.
High-Side Current Shunt Monitors

INA138, INA168, INA170
Get samples and datasheets at: www.ti.com/sc/device/INA138, www.ti.com/sc/device/INA168, www.ti.com/sc/device/INA170
The INA193 - INA198 family of current shunt monitors with voltage output can sense drops across shunts at common-mode voltages from 16V to +80V, independent of the supply voltage. The devices are available with three output voltage scales: 20V/V, 50V/V and 100V/V. The 400kHz bandwidth simplifies use in current control loops. Key Features Common-mode voltage range: 16V to +80V High accuracy: 3% over temp Bandwidth: up to 400kHz Quiescent current: 250A Three transfer functions available: 20V/V, 50V/V, 100V/V Packaging: SOT23 Applications Current shunt measurement in automotive, telephones, computers Portable and battery-backup systems Power management Use in PWM current control loops 16-bit, 1 channel, 250mV input range: ADS1202 16-bit, 1 channel, 250mV input range: ADS1203 16-bit, 4 channels, 0 to 5V input range: ADS1204
RS VIN+ V+ Negative and Positive Common Mode Voltage VIN+ 5k VIN 5k Load IS
The INA138 and INA168 are high-side, unipolar, current shunt monitors with low quiescent current and are available in SOT23-5 packaging. Input common-mode and power supply voltages are independent and can range from 2.7V to 36V (IN138) or to 60V (INA168). The devices convert a differential input voltage to a current output. The current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Key Features Wide supply range: INA138: 2.7V to 36V INA168: 2.7V to 60V Unidirectional current: INA138/9, INA168/9 Bidirectional current: INA170 Low quiescent current: 25A Independent supply and common-mode voltages Wide temp range: 40C to +125C Packaging: SOT23-5 Applications Current shunt measurement in automotive, telephones, computers Portable and battery-backup systems Power management Precision current source
RS VIN+ IS
A1 +
A2
Up to 60V
VIN+ 5k VIN 5k
RL
Load
OUT=
ISRSRL 5k
V+
+
INA19x functional block diagram.
OUT GND RL
VO = ISRSRL/5k
INA138, INA168 functional block diagram.
Motor Control
Asynchronous, DC and Servo Motors
Digital Motor Control
Todays motor control applications challenge electronic circuitry to achieve the highest efficiency, lowest power consumption and highest precision control. There are several motor types in which digital and analog solutions are increasing performance in motor control applications. Synchronous motors are also described as BLDC (Brushless DC) or PMSM (Permanent Magnet Synchronous Motors). The only difference between them is the shape of the induced voltage, resulting from two different manners of wiring the stator coils. The back-emf is trapezoidal in the BLDC motor, and sinusoidal in the PMSM motor. Digital techniques addressed by the C2000TM DSP controller make it possible to choose the correct control technique for each motor type. Processing power can extract the best performance from the machine and reduce system costs. Options include using sensorless techniques to reduce sensor cost, or even eliminate it; additionally, complex algorithms can help simplify the mechanical drive train design, also lowering system cost. For asynchronous motors, speed regulation is a typical concern. Three phase inverters with a 6 PWM scheme are widely used for variablespeed drive applications. Depending on the application, a simple V/Hz open-loop (scalar) control where no feedback is required can be applied, or a vector control in which current, voltage and speed information is needed. Scalar Control: (V/Hz) Simple to implement: only three sine waves feeding the motor are required Position information not required (optional): Doesnt deliver good dynamic performance Torque delivery not optimized for all speeds Vector control, also called Field Oriented Control, allows designers to fulfill all of the ideal control requirements. Having information on all system parameters, such as phase current and bus voltage, allows delivery of the appropriate power at the right moment thanks to real-time control made possible by DSP integration and MIPS availability.
PI iQS iDS PI iDS PWM6 i35 Park iAS iBS qAS Flux iAS Est iBS i05 Clarke i35 iBS ADC Meas Driver VDC ADC adCIN3 adCIN1 iQS PI VDS Inv Park VDS Space TB PWM Vector Driver Gen TC EV Voltage Source Inverter I1 I2 VBUS
OPA364 OPA364 OPA354 Analog Input
19
Reset
PIE 2 TCLKINA/TDIRA ADC Start T1PWM_T1CMP
EV Control Registers/Logic GP Timer 1 Compare GP Timer 1
Output Logic
Compare Unit 1 Compare Unit 2 Compare Unit 3 Data Bus GP Timer 2 Compare GP Timer 2
PWM Circuits PWM Circuits PWM Circuits
Output Logic Output Logic Output Logic
PWM1 PWM2 PWM3 PWM4 PWM5 PWM6
Output Logic
T2PWM_T2CMP
CLK DIR MUX
QEP Circuit
Capture Units
CAP1/QEP1 CAP2/QEP2 CAP3/QEP3
TMS320F2810 functional block diagram.
Servo Motor Control Application and Featured Products

The figure below is an example of a typical motor control circuit. The IU, IV and IW channels measure the motors currents. The motors position/speed and load are measured simultaneously by Ax, Bx, etc. using resolver or analog encoder sensors. Simultaneously sampling at least two currents or all three currents is important to achieving maximum accuracy in motor positioning. Good linearity and low offset of the ADC is mandatory. Channel AN1 measures the differential DC link voltage. Fast sampling in the range of 2s or less per channel guarantees fast leakage current detection for IGBT control. AN3 measures the motors temperature. The level input of the window comparators are connected to an 8-bit DAC for control purpose.
DC Link Voltage DC Link Voltage Sensor
IGBTs
Current Sensor IU Current Sensor IV Current Sensor IW
R S T
VQS
VAS
TA
PWM1
32 AC Motor
UC
VC
WC
IU
IV
IW
AN1
Sign and Over-Current Comparators
3 ADCs 7 S&H 12 Channels
A1/B1
OPA364 22 Positioning Sensor1 at Motor
8-Bit DAC OPA364 AN2 2.5V Reference Counters Flexible Interface A2/B2 OPA364
iAS iBS V35 V06 Phase Voltage Calc TA TB TC
Speed Est
On-Chip Hardware ACI
22 OPA364 AN3
ADS7869
AX/BX
OPA364
Load with Positioning Sensor2
On-Chip Software
Vector control functional block diagram.
Servo motor control functional block diagram.
20
Motor Control
Controller Generation, Fixed Point
TMS320C28xTM
Get samples, datasheets, tools and app reports at: www.ti.com/c2000
Current Shunt Modulator

ADS1203
Get samples, datasheets and EVMs at: www.ti.com/sc/device/ADS1203
The ADS1203 is a delta-sigma modulator with 95dB dynamic range, operating from a single +5V supply. The differential inputs are ideal for direct connection to transducers or low-level signals. It is available in an 8-lead TSSOP or 16-pin QFN (3x3) package. Key Features Resolution: 16-bits Input range: 250mV Linearity: 1LSB (typ) Internal 2.5V reference Family Members 16-bit, 1 channel, 250mV input range: ADS1202 16-bit, 1 channel, 250mV input range: ADS1203 16-bit, 4 channels, 0 to 5V input range: ADS1204 16-bit, 2 channels, 0 to 5V input range: ADS1205 16-bit, 1 channel, 100mV input range: ADS1208 INA139: high-side current-shunt monitor (diff. amplifier), up to 36V common-mode input INA169: high-side current-shunt monitor (diff. amplifier), up to 60V common-mode input
The C28xTM controllers are the industrys first 32-bit control-based DSPs with onboard reprogrammable Flash, factory programmed ROM, or cost effective RAM-only memory options and performance from 100 to 150 MIPS. Specifications 32-bit, fixed-point C28x DSP core Up to 150-MIPS operation 1.8/1.9V core and 3.3V peripherals Easy-to-use software and development tools speed time-to-market Applications Digital motor control Digital power supply Advanced sensing in industrial, automotive, medical and consumer markets
Code Security U p to U p to 8 40 256 KBytes KBytes Bot Sectored KBytes RAM Flash/ ROM RAM XINT F* M emory Bus
Event M anager A Event M anager B 12-Bit ADC W atchdog Peripheral Bus GPIO
VIN+ VIN
2nd- Order Modulator
MDAT MCLK
Interrupt M anagement
100-150MI PS C28xTM 32-Bit DSP

RC Oscillator 20MHz Interface Circuit M0 M1 Buffer Reference Voltage 2.5V
32x32-Bit M ultiplier 32-Bit Timers (3) Real-Time JTAG
M cBSP CAN 2.0B SCI-A
VDD GND
R-M -W Atomi c ALU 32-Bit Register File
SCI-B SPI
* Available on x2812 controller only.
ADS1203 functional block diagram. TMS320F2812 controller block diagram.
Motor Control
2+2 Channel Simultaneous Sampling, 16-Bit ADC
ADS8361
21
Complete Analog Front End

ADS7869
The ADS8361 is a 16-bit, 500kSPS ADC with four fully differential input channels grouped into two pairs for high-speed, simultaneous signal acquisition. The device offers a high-speed, dual serial interface and is available in an SSOP-24 package and specified over the 40C to +85C operating range. Key Features Four fully differential input channels 2s throughput per channel INL: 3LSB (typ) Power consumption: 150mW Internal 2.5V reference Supply voltage: 2.7V to 5.5V Pin-compatible upgrade to ADS7861 (12- to 16-bit) Family Member 12-bit, 2x2 channel, serial interface: ADS7861 12-bit, 2x2 channel, parallel interface: ADS7862 12-bit, 3x2 channel, parallel interface: ADS7864 16-bit, 2x2 channel, serial interface: ADS8361 16-bit, 6x1 channel, parallel interface: ADS8364
The ADS7869 is the next-generation successor of the well-known VECANA01 analog front end and includes three ADCs with a total of seven S/H capacitors and 12 fully differential input channels. There are four sign comparators connected to four input channels. The device offers a very flexible digital interface, featuring three different modes, starting from serial SPI, adjustable parallel up to the VECANA01compatible mode. For position sensor analysis, two up-down counters are added on the silicon. This feature ensures that the analog input of the encoder is held at the same point of time as the counter value. Key Features Resolution: 12-bits Sampling rate: 1MSPS INL: 1LSB (typ) Two up-down counter modules on-chip Power consumption: 250mW Packaging: TQFP-100
IUp IUn A1p A1n A2p A2n
Offset SH1 MUX1 SH2 MUX4 ADC1 12-Bit Gain
DAC1 12-Bit DAC2 12-Bit
RAM FIFO
ADDR<0.5> Conv Input Select
Axp Axn IVp IVn B1p B1n B2p B2n
SH6
Offset SH3 MUX2 SH4 ADC2 12-Bit MUX5 Gain
DAC3 12-Bit DAC4 12-Bit DATA<0.15>
CH A0+ CH A0 SHA CDAC CH A1+ CH A1 REFIN REFOUT CH B0+ CH B0 Internal 2.5V Reference
SAR COMP SERIAL DATA A SERIAL DATA B M0 M1 Serial Interface A0 CLOCK CS RD SHA CDAC COMP BUSY CONVST
Bxp Bxn
SH7
Conv DAC5 12-Bit DAC6 12-Bit Control Logic
CLK RST
Offset Gain IWp IWn AN1p AN1n AN2p AN2n AN3p AN3n
INT SH5 MUX3 Conv Internal 2.5V Reference HOLD1 HOLD2 Conv Up/Down Counter 1 16-Bit ADC3 12-Bit DAV
REFOUT
REFIN
Ref
Up/Down Counter 2 16-Bit
CS RD WR M1 M0 CNTA2 CNTB2 CNTA1 CNTB1
DAOUT
DAC7 8-Bit
CH B1+ CH B1
SAR
UCp UCn UCOMP
WCOMP
UILIM
VILIM
WILIM DAIN
22
Motor Control
1.8V, 7MHz, 90dB CMRR Rail-to-Rail I/O Op Amps

OPA363, OPA364
Get samples, datasheets and EVMs at: www.ti.com/sc/device/OPA363 and www.ti.com/sc/device/OPA364
The OPA363 and OPA364 families are high-performance CMOS op amps optimized for very low voltage, single-supply operation. Designed to operate on single supplies from 1.8V (0.9V) to 5.5V (2.25V), these amps are ideal for sensor amplification and signal conditioning in battery-powered systems. They are optimized for driving medium speed A/D converters (up to 100kHz) and offer excellent CMRR without the crossover associated with traditional complementary input stages. The input common mode range includes both the negative and positive supplies and the output voltage swing is within 10mV of the rails. All versions are specified for operation from 40C to +125C. Key Features Slew rate: 5V/s Low offset: 500V (max) Quiescent current: 750A/channel (max) Available in single, dual and quad Packaging: SOT23-5, SO-8, MSOP-8, TSSOP-14, SO-14 Applications Signal conditioning Data acquisition Process control Test equipment Active filters
V+ = 1.8V V+ = 1.8V
100
OPA363 OPA364
ADS8324 1nF
VIN
OPA363 functional block diagram.
Device Description Zero-Drift Op Amp High-Precision Instrumentation Amp Digital Temp Sensor Low Noise Amp Key Features 0.05V/C Drift, 5V Offset, RRIO at 3.3VDC, Single Supply 30nV/ Hz Noise, RRIO, Single Supply Integrated Diode Temp Sensor, ADC and SPI Interface to Convert Valve Temp into Digital Code or the DSP VN = 3nV, CMRR > 120dB, VS = 5 to 36V Interfaces PROFIBUS Fieldbus to System Controller Interfaces CAN-Fieldbus to System Controller Benefits Best Long-Term Stability for Industrial Use, No Need for Dual Supply, Best in Class, Automotive Temp Range Lowest Noise in the Industry and Best Long-Term Stability, No Need for Dual Supply High Resolution and Accuracy, Extended Industrial Temperature Range, Ultra Small Package Very Low Noise, Small Package Optimized for PROFIBUS, Up to 160 Users Per Bus, Up to 40Mbps Improved Drop-In Replacement for PCA82C251, Tolerates 200V Transients Very Low Drift, Tiny Package Low Noise, Small Board Area Very Easy to Use, Flexible Output Low Cost Direct DC-Link Current Measurement Small Package Free, www.ti.com/filterpro Other TI Solutions OPA735, 12V Version with Improved Noise and Drift INA337, Automotive Temp Range, 40C to +125C TMP175 (SMB-Bus Interface) OPA350, OPA725 SN65HVD485E, Low-Cost Version SNHVD233 (3.3V Version) REF02, REF102 DCP010505 TPS64200 INA19x, INA138 DAC7741
Amplifiers
OPA335 INA326 TMP121 OPA227
Interface
SN65HVD1176 PROFIBUS Transceiver SN65HVD251 CAN-Bus Transceiver

REF3140 DCV010505D TPS54110 ADS1206 DAC7731 Voltage Reference Dual Converter SWIFTTM Buck Converter V/F Converter 16-Bit, 5s Settling Time Free Design Software Drift = 20ppm/C, 4.097V, 0.2% Isolation Converter, +5VIN, 5VOUT Adjustable Output (0.9V to 3.3V), 1.5A 0-5V Input, 1-4MHz Output Output = 10V, INL = 0.0015% Design Low Pass Filters, Quick, Easy
Data Converters
Other
FilterProTM
Motor Control
TMS320C28x Controller Generation
Boot MIPS ROM 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB
23
Device
RAM 12KB 12KB 20KB 20KB 36KB 36KB 36KB 36KB 36KB 36KB 40KB 40KB 40KB 36KB 36KB 36KB 36KB
12-Bit # # A/D Chs/ Core Flash/ CAP/ PWM Hi-Res Conversion WD Comm Ports I/O Voltage ROM Timers QEP Channels PWM Time (ns) EMIF Timer Other SPI SCI CAN Pins (V) Packaging ($U.S.)+ 32KB 32KB 64KB 64KB 128KB 128KB 128KB 256KB 256KB 256KB 128KB 256KB 256KB 256KB 9 9 15 15 15 15 7 7 7 7 7 7 7 7 7 7 7 2/1 2/1 4/2 4/2 4/2 4/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6+2 6+2 12 + 4 12 + 4 12 + 4 12 + 4 16 16 16 16 16 16 16 16 16 16 16 3 3 4 4 4 4 16Ch/160 16Ch/160 16Ch/160 16Ch/160 16Ch/160 16Ch/160 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y I2C I2C I2C I2C I2C I2C McBSP McBSP McBSP McBSP 2 2 4 4 4 4 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 32 32 32 32 32 32 56 56 56 56 56 56 56 56 56 56 56 1.8 1.8 1.8 1.8 1.8 1.8 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 100-LQFP 100-BGA 100-LQFP 100-BGA 100-LQFP 100-BGA 128-LQFP 128-LQFP 179-BGA 176-LQFP 128-LQFP 179-BGA 176-LQFP 128-LQFP 128-LQFP 179-BGA 176-LQFP $5.79 $5.79 $8.69 $8.69 $11.52 $11.52 $13.81 $14.73 $15.65 $15.65 $ 9.11 $10.63 $10.63 $7.05 $8.22 $9.59 $9.59
Flash Devices
TMS320F2801-PZA/S/Q TMS320F2801-GGMA/S/Q TMS320F2806-PZA/S/Q TMS320F2806-GGMA/S/Q TMS320F2808-PZA/S/Q TMS320F2808-GGMA/S/Q TMS320F2810-PBKA/S/Q TMS320F2811-PBKA/S/Q TMS320F2812-GHHA/S/Q TMS320F2812-PGFA/S/Q
RAM-Only Devices
TMS320R2811-PBKA/Q TMS320R2812-GHHA/Q TMS320R2812-PGFA/Q McBSP 1 McBSP 1 McBSP 1 McBSP McBSP McBSP McBSP 1 1 1 1
ROM Devices
TMS320C2810-PBKA/Q TMS320C2811-PBKA/Q TMS320C2812-GHHA/Q TMS320C2812-PGFA/Q
+
Prices are quoted in U.S. dollars and represent year 2006 suggested resale pricing. All prices are subject to change. Customers are advised to obtain the most current and complete pricing information from TI prior to placing orders. TI may verify final pricing prior to accepting any order. Minimum volumes for C281x devices are 10 KU with NRE of $11,000. A = 40 to 85C; S = 40 to 125C (10% adder over A); Q = 40 to 125C, Q100 qualified (15% adder over S) All devices are available in PB-Free Green packaging.
24
Security
Surveillance Cameras, Glass Breakage and Smoke Detectors
Surveillance IP Video Node Basics

Digital video surveillance systems include embedded image capture capabilities which allow video images or extracted information to be compressed, stored or transmitted over communication networks or digital data links. The TVP51xx video decoder family offers a high-performance, low-cost analog video interface supporting PAL/NTSC/SECAM video systems. Fast lock times and superior analog processing capabilities make them an ideal fit for any kind of streaming video applications. A typical audio subsystem consists of an audio codec and an audio amplifier. The TPA3007D1, based on the patented filter-free modulation scheme, is a high-efficiency, state-ofthe-art, Class-D audio amplifier. TI's video surveillance solutions are primarily based on the high-performance TMS320DM64x digital media processors, which have on-chip video ports for easy connection to video devices. The DM64x devices are capable of handling both video and audio encode/decode for IP-based video surveillance applications. Cost-competitive video compression/decompression algorithms are available from TI or through our partner network for JPEG, MPEG2, MPEG4, H.264, and more. Audio compression/decompression algorithms are also available.
Video Processor DMX64x Video Decoder Video TVP5150A Decoder TVP5154
Interface Logic
Storage Device
Video Port SDRAM EMIF I2C Flash
Video Decoder Video TVP5150A Decoder TVP5154
PCI Video Port
Host Computer
IP Network
Microphone
Voice CODEC TLV320AIC13 TLV320AIC21 TLV320AIC26 TLV320AIC28 AC Line
PoE Power Source Equipment 48 VDC McBSP EMAC

RJ-45
Ethernet PHY Transceiver LEGEND Power Amplifier Data Converter
Earphone
AC Adapter Power Factor Corrector PWM Controller MOSFET Driver PoE IEEE 802.3af Power Solution Logic Processor Other
12-14 VDC Power Management

+1.1V-1.8V/3.3V Processor Core +3.3V/+5V Analog/Digital +5V/1A
Dual Output LDO
DC-DC Buck Controller
LDO
Power Mux
Supply Voltage Supervisor
Battery Backup Charger
IP Video Node block diagram.
Security
High-Performance Digital Signal Processors
TMS320DM64x
Get samples, datasheets and app reports at: www.ti.com/sc/device/TMS320DM642
25
High-Performance Digital Signal Processors

TMS320C6414T, TMS320C6415T
Get samples, datasheets and app reports at: www.ti.com/sc/device/TMS320C6414T, www.ti.com/sc/device/TMS320C6415T
TIs video surveillance solutions are primarily based on the highperformance DM64x DSP-based digital media processors. The DM64x digital media processors have on-chip video ports for easy connection to video devices and are capable of handling both video and audio encode/decode for IP-based video surveillance applications. The single programmable digital media processor is a cost-effective solution, because the need for external PCI or EMAC is eliminated. Key Features Performance up to 5760MIPS performance at 720MHz Multiple input/output glueless interfaces for common video and audio formats Performance real-time video encoding, decoding, or transcoding Three dual-channel video ports support simultaneous video input and output Advanced connectivity with 10/100 Ethernet MAC and 66MHz PCI Ready-to-use application software such as MPEG-4, MPEG-2, MPEG-1, WMV9, H.26L, H.263, H.261, M-JPEG, JPEG2000, JPEG, H.264 and more. Applications Network camera-based surveillance and IP video nodes Video-on-demand set-top boxes, personal video recorders and digital media centers Statistical multiplexer and broadcast encoders IP-based video conferencing and IP-based videophones
TMS320C64x DSPs offer the highest level of performance to meet the demands of the digital age. At clock rates up to 1GHz, the C64x DSPs can process information at a rate of more than 8000MIPS. TIs C64x DSPs are backed by an extensive selection of optimized algorithms and industry-leading development tools. Key Features Highest in-class performance with production-class devices available up to 1GHz TMS320C64x DSPs are 100% code-compatible with TMS320C6000 DSPs C64x DSPs offer up to 8000MIPS with costs as low as $20.00 Advanced C Compiler and Assembly optimize efficiency and performance Packaging: 23/27mm BGA options Applications Statistical multiplexers Broadcast encoders Video conferencing Video surveillance
C64xTM DSP
EMI F-A EMI F-B Timer 2 C64x DSP Core Instruction Fetch Enhanced DM A Controller (64-Channel) Instruction Dispatch Advanced Instruction Packet L2 M emory 1024K Bytes Instruction Decode Test Data Path A A Register File Control Registers Control Logic Advanced In-Circuit Emulation Interrupt Control Data Path B B Register File L1P Cache Direct -M apped 16K Bytes Total
TMS320DM642 Digital Media Processor EMIF64

VCXO Interpolated Control (VVIC)
Timer 1
Power Down PLL
Timer 0 M cBSP2 UTOPIA OR M cBSP1 M cBSP0 GPIO[8:0] GPIO[15:9]

Interrupt Control
L1P Cache 16 KBytes

C64xTM DSP Core Instruction Fetch Instruction Dispatch Instruction Decode Data Path 1 A Register File Control Registers In-Circuit Emulation Data Path 2 B Register File
PCI-66 or HPI32 or
HPI16 and EMAC/MDIO
20-Bit Video Port 0 (VP0) or

or 2 10-Bit VP0
10-Bit VP0 and McBSP0 or McASP
L1 S1 M1 D1
D2 M2 S2 L2
L1 S1 M 1 D1
D2 M 2 S2 L2
10-Bit VP1 and or McBSP1 or 2 10-Bit VP1 or McASP 20-Bit Video Port 1 (VP1)
L1D Cache 16 KBytes Timer 0
HPI OR PCI Interrupt Selector PLL (x1, x6, x12) Power-Down Logic Boot Configuration L1D Cache 2-Way Set -Associative 16K Bytes Total
20-Bit Video Port 2 (VP2)

or 2 10-Bit VP2
Timer 1 Timer 2 GPIO16 IIC0
TMS320DM642 digital media processor block diagram.
TMS320C6415T DSP block diagram.
L2 Cache/Memory 256 KBytes
Enhanced DMA Controller
26
Security
Description Op Amp Class-D Audio Power Amp NTSC/PAL/SECAM 4 x10-Bit Digital Video Decoder w/Macrovision 8-Bit Video Decoder (PAL, NTSC, SECAM) Dual-Channel Voice Codec Key Features Ideal for Audio Amplification, Low Power Consumption 6.5W into an 8 Load from 12V Supply, 3rd Generation Modulation Technique, Short Circuit Protected Quad, 30MSPS, 10-Bit ADC, Supports Component YPrPb/RGB, Programmable Video Output Format, Certified Macrovision Copy Protection Detection, Built-In Video Processing, VBI Data Processor, I2C Interface Single 8-Bit ADC, Composite and S-Video Support, Built-In Video Processing, I2C Interface Programmable Sampling Rate Up to: Max 26kSPS w/On-Chip IIR/FIR Filter, Max 104kSPS w/IIR/FIR Bypassed, Built-In Amps for Microphones/Speakers Ability to Perform Video/Audio Encode on Multiple Channels, Direct I/F to NTSC/PAL Decoder Through Video Ports/Audio Through McBSP Internal PD Detection Signature Output, Internal PD Classification Output, Programmable Inrush Current Limit, 0.3 Low-Side FET Input, Internal Thermal Protection and UVLO Compliant to the PoE IEEE 802.3af Standard Programmable Soft Start with Active Low Shutdown Benefits Cost-Effective Solution with Low Noise and Small SOT-23 Package Replaces Large LC Filter with Small Ferrite Bead Filter, No Heatsink Required, Improved Efficiency, Improved SNR 10 Video Inputs, SCART Support, Includes a 5-line Adaptive Comb Filter for Best-in-Class Y/C Separation, 4 10-Bit, 30MSPS ADCs for Superior Noise Performance 2 Video Inputs, 4-line Adaptive Comb Filter, Fast Lock Times, Extremely Low Power, Low Cost Directly Connect to McBSP without Logic, Interface with Multiple Analog I/Os DSP Software, Analog/Digital PGA to Increase Performance Cost Effective with Single Programmable DSP, No Need for External PCI or EMAC, Eliminates the Need for External FPGA Individually Manage Power for Up to 8 Ethernet Ports, All Operations of the TPS2383A are Controlled Through Register Read and Write Operations Over a Standard (Slave) I2C Serial Interface Anti-Cross Conduction Circuitry, Allows the Output to Sink Current by Allowing the Synchronous Rectifier to Turn on w/o the Switch Node Collapsing Low-Input Voltages (1.8V to 10V), Draws >12A, Allowing Accurate Sensing of the External 24.9-k Discovery Resistor Designed to Have a Fast Transient Response and be Stable with 10F Low ESR Cap at Low Cost Complete Power Management Solution Designed for TMS320TM DSP Family, Easy Programmability, Differentiated Features: Accuracy, Fast, Transient Response, SVS Supervisory, Reset and Enable Pins On-Chip Sync Rectifier Drives Less Expensive N-Ch MOSFET, Allows Smaller Input Cap to Reduce Cost, Resistor-Less Current Protection Reduces External Part Count
Device
Amplifiers
TLV246x TPA3007D1
Data Converters
TVP5146
TVP5150A TLV320AIC12
Processor
TMS320DM642 Video Processor

TPS2383 Power Sourcing Equipment Power Managers (PSEPM) Current Mode PWM Controller Power Interface Switch
UCC1809/ 2809/3809 TPS2370 TPS76850 TPS70148
TPS5130
All Detection, Classification, Inrush Current Limiting and Switch FET Control Necessary for Compliance with IEEE 802.3af Standard Fast-Transient-Response Low Drop-Out = 230mV at 1A, 2% Tolerance, Open Drain Power Good, 1A LDO Thermal Shutdown Protection Dual-Output LDO 1.2V/1.5V/1.8V/2.5V/3.3V Options for Dual-Output Voltages, Selectable for DSP Systems Power-Up Sequence for DSP Applications, Power-On Reset with Delay, Power Good, Two Manual Reset, Thermal Shutdown Triple Sync Buck 3 Independent Step-Down DC/DCs and 1 LDO, 1.1V-28V Input Range, Controller with LDO 0.9V to 5.5V Output Range, Sync for High Efficiency, Auto PWM/SKIP Overvoltage/Current Protection, Short-Circuit Protection
Security
Smoke Detector
Smoke detection is a critical application, not only because life can depend on the reliability of the sensor, but also because false alarms can be quite costly. There are several ways to detect smoke, but optical detection is the most common. In order to achieve high reliability, a highly integrated solution is desirable. Due to laws that require a detector in every room (e.g. in hotels) cost is also a decisive factor. In order to achieve low maintenance costs, batteries must have several years of life which require a pulsed application with fast wake-up time, fast processing time and exceptionally low stand-by current. This makes the ultra-low-power MSP430 microcontroller an ideal choice for this application. The figure at right, shows the heart of a smoke detector. A pulsed IR-transmitter and IR-receiver are located in a non-reflective measurement chamber which has to be protected against outside light, only light from the IR-transmitter, which is reflected by the smoke, can reach the IR-receiver. Two subsequent measurements are performed. The first measures the surrounding light when the IR-transmitter is switched off; the second measures reflected light when the IR-transmitter is switched on. This differential measurement method requires not only a high dynamic range linearity sensor and circuitry, but also a high linearity of the system.
27
Smoke detector block diagram.
Device Type Microcontroller Operational Amplifiers Recommended Device MSP430F1111A OPAx340 OPAx336 OPAx381 TLV247x TLV276x TLV224x OPAx379 Device Characteristics 1.8V to 3.6V Lowest-Power controller with Analog Comparator for Dual Slope A/D Conversion Fast RRIO Transimpedance Amplifier with Trimmed Offset Voltage Low-Offset, Low-Drift, RRO Amplifier with Only 32A Quiescent Current Fast, Zero-Drift Transimpedance Amplifier with <1mA Quiescent Current Fast, Lowest-Drift 0.4V/C, General-Purpose Amplifier with Shutdown Medium Speed, 1.8V RRIO Amplifier with Shutdown and Fast Turn On/Off Time 1A, 5kHz, RRIO Nanopower Operational Amplifier 1.8V, 2A, 100kHz, RRIO Nanopower Operational Amplifier
New devices appear in bold red.
28
Security
breaks. The figure below shows an implementation using a low dropout regulator, an amplifier and the MSP430 microcontroller with an onboard ADC. A fast rail-to-rail amplifier is needed to boost the transducer signal to the ADC input voltage range. All following stages are integrated into the MSP430 signal controller.
Glass Breakage Detector

The typical acoustic glass breakage sensor works by using a microphone to measure the sound spectrum of pressure differences in the glass. The first signal wave represents the vibration caused by an object hitting the glass. This frequency is in the 200kHz range. The second signal, in the 5kHz frequency range, occurs when the glass
Glass breakage detector block diagram.
Device Type Microcontroller Operational Amplifiers Recommended Device MSP430F1132 TLV278x OPAx363 OPA336 OPA348 OPA381 TPS77001 ADS7866 Device Characteristics 1.8V to 3.6V VCC, industrys lowest-power controller with integrated 10-bit, 200kSPS ADC Fast 8MHz GBW, 4.3V/s SR, 1.8V, RRIO operational amplifier with shutdown Fast 7MHz GBW, 6V/s SR, 1.8V, RRIO amplifier with excellent input linearity and shutdown 2.3V to 5.5V single supply, RRO within 3mV, 20A/amp IQ, 125V (max) offset, 1pA bias current 1MHz BW, 2.1V to 5.5V single supply, RRIO, 45A (typ) IQ, 0.5pA bias current 18MHz GBW, extremely high precision, excellent long-term stability, low 1/f noise, 5 decades dynamic range, 800A IQ Adjustable, 50mA output current voltage regulator with low dropout and low quiescent current Lower power family at 8-, 10-, 12-bit >200kSPS, 1.2V to 3.6V ADC
Voltage Regulator Data Converter

Electronic E-Meter
Electromechanical meters have been the standard for metering electricity since billing began. Todays electric companies are demanding more information from meters in the residential sector, where metering has typically been limited to kilowatt hours. New features such as multi-tariff billing, reactive energy measurement and power quality monitoring are desirable to improve generation, distribution, customer service and billing. In order to accommodate the advanced requirements not available in electromechanical meters, manufacturers have begun adopting all-electronic solutions. New energy measurement integrated circuits from TI enable accurate, dependable and robust meters with key features demanded by utility companies. TI offers the first single-chip IC for electronic meters along with analog products needed to complete a state-of-the-art e-meter design while saving the manufacturer valuable design time and cost of development. Calculated Results (Cont.) Status Waveform samples Power factor DC removal Mains period RMS, peak values (current/voltage) Temperature Line cycle counter Automatic voltage drop detection level select by software Tamper detection for single-phase, 2-wire metering Next-Generation Electronic E-Meter The MSP430FE42x is designed to meet the requirements of nextgeneration electronic e-meters including the ability to meet different international standards such as IEC62053-21/22/23 (Europe) and ANSI C12.XX (U.S.) High integration provides for an easy-to-use solution with the smallest size and lowest cost.
29
Electronic E-Meter
Industrys First Single-Chip IC for Electronic Energy Meters Single-chip solution for electronic e-meter application Single supplier solution Analog Front End (AFE) with coprocessor integrated in the ESP430CE1 module. Ultra-low-power MSP430FE42x for extremely long life cycles Main CPU can run mainly for communication like ripple control, tariff switching or sleep Provides shunts, current transformers (CT) and di/dt sensors like Rogowski coils Calculated Results Active, reactive, apparent power Software programmable metering start current
-45dB
REF32xx Precision V-Reference
123.456 kWh 3.3V
5V
LCD SN65 HVD 3082 RS-485 to modem
VL1 IL1 V+ 3.3V 32kHz 3V-Li coin TMP75 Xtal
MSP430FE427
GRD
Temperature Compensation For Xtal
Device MSP430F427 Description Ultra-Low-Power, 16-Bit RISC CPU Key Features Single-Chip IC for Electronic E-meter Benefits Other TI Solutions
Microcontroller
Easily Integrated Solution in a Small Package and Lowest Cost MSP430FE423/FE25
Interface
SN65HVD3082E 5V, Half-Duplex RS-485 Transceiver SN65LBC184 5V, Half-Duplex RS-485 Transceiver Ideal for Metering Applications, Cost-Effective Solution with Low-Power and Slew Rate Control SN65HVD3085E Low Power Consumption and Slew Rate Control Ideal for Metering Applications, Integrated Integrated Transient Voltage Protection for Highest Reliability SN65LBC182 Transient Voltage Protection and Slew Rate Control High-Speed Simultaneous Sampling ADC for Very Low Drift, High Output Current 10mA, High Accuracy 0.01%, Low Quiescent Current 100A Fastest Control Loop to Secure Circuit Breaker Shut Off Small Package, Excellent Performance, Competitive Price ADS1204 REF31xx, REF30xx, REF29xx, REF02, OPA2822, OPA350 TMP175, TMP100
Data Converter
ADS8364 REF32xx 6Ch, 16-Bit, 250kHz SAR 4ppm/C, 100A, SOT23-6, Series Voltage Reference Rail-to-Rail, 1.8V, High CMRR, GBW 7MHz Digital Temp Sensor with Two-Wire Interface
Voltage Reference
Amplifier
OPA363 TMP75 Low Noise , No Crossover Distortion at Low Power Ideal for Driving High-Speed and Precision 16-Bit ADCs 9 to 12-Bit User Selectable, 1.5C (max) from 25C Low Power, Small Package, High Resolution, Good Accuracy to +85C, Low Quiescent Current 50A
Digital Temperature Sensor
30

Scientific Instrumentation
ADS8381 X Servo M otor
18-Bit ADC, W ide Dynamic Range
Scientific Instrumentation
In todays industrial scientific instrumentation applications, such as gas/liquid chromatography, mass spectrometry and vibration analysis, the analog signal requires processing with maximum resolution at the highest speed while achieving optimum signal-to-noise ratio, lowest ripple and THD. For automatic test equipment (ATE), an excellent DNL and INL are also expected. In gas chromatography applications, an ADC converts the signal and separates the desired frequency product from the mixture. Combining high resolution (16- to 18-bit range) with the highest speed (MHz range) while achieving high SNR is the major challenge. The ADS160x family of 16-bit, high-speed, delta-sigma ADCs was developed for applications based on Adaptively Randomized Data Weighted Averaging (DWA) Algorithm architecture and works up to 10MHz (10MHz in 2x mode) bandwidth while achieving SFDR above 100dB. In applications such as mirror positioning for precision laser beam control, a very fast, high-resolution control loop is needed to achieve maximum accuracy and throughput. The ADC needs to have the lowest latency at maximum resolution to position the laser. The application below shows the ADS8381 (18-bit, 500kHz)one of the fastest SAR ADCs availablewith 112dB SFDR and 18-bits NMC.
Amplitude (dB)
DSP C
24-/ 32-bit
Laser OPA549 LASER

e.g. Signature on a Label
Analog or Digital Boost Stage
DAC7731
16-bit feedback DAC with 10V output
Y
up to 15A peak current (Audio platform specs)
Servo M otor
ADS8381
DSP C
Audio Pow er Amplifier to drive the Servo M otor (Impedance like a speaker)
OPA549
Analog or Digital Boost Stage (Audio)
DACxxxx
DWF1-364838 laser mirror positioning application, test and working principle: 1 mirror for 1 direction.
SPECTRAL RESPONSE 0 20 40 60 80 100 120 140 160 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency (MHz) fIN = 4.0MHz, 6dBFS SNR = 86dBFS SFDR = 105dB
ADS1610 spectral response.
Recommended high-speed ADC driver circuit using OPA2822.

High-Speed Signal Analysis
High-Speed Signal Analysis
High-speed test and measurement applications are characterized by the need for high SNR, high sampling rate and other high-speed characteristics as determined by the system designer. Input signals may be large bandwidth and thus the input bandwidth of the ADC becomes critical. At the same time, to support input frequencies higher than 1/2 the ADCs sampling rate, undersampling is often applied, requiring the converter to perform well (SNR/SFDR) at these high input frequencies. Peripheral functions also have a dramatic impact on signal-chain performance. The amplifier driving the ADC has a direct impact on SNR/SFDR, thus it must be chosen carefully to maintain specified system performance. Additionally, ADC performance is critically impacted by clock jitter; thus, a lowjitter clock source can provide an ideal solution. ADCs in Video and Imaging The ADS5500s 14-bit resolution provides higher SNR to process highquality images accurately, and simplifies the analog input circuitry by reducing the need for programmable gain amplifiers. Also, its high sample rate allows designers to scan images faster or oversample the input signal, which simplifies analog filter design and lowers system cost. The ADS5500s low power dissipation extends battery life in portable systems and provides cost savings due to the lower power supply and system thermal management requirements.
TMS320DM64x DSP
31
CCD/CMOS Sensor
CDC Correlated Double Sampling
Analog Filter
Amp
ADS5500
Digital Processing
OPA847, OPA695 THS4304
Input Conditioning
AMP
ADS5500
GC5016
DSP TMS320C64xTM TMS320C55xTM
ADS5500 in video and imaging applications.
Clock Source
OPA847 OPA695 THS4503 CDC
CDCM7005 CDCV304 CPCP1803 CDCVF2310
ADS5500 in test and measurement applications.
High-Performance ADCs
Device ADS5444 ADS5440 ADS5500 ADS5424 ADS5541 ADS5423 ADS5520 ADS5521 Resolution (Bits) 13 13 14 14 14 14 12 12 Speed (MSPS) 250 210 125 105 105 80 125 105 SNR (dBc) 68 at 230MHz IF 68 at 230MHz IF 69.5 at 100MHz IF 74 at 50MHz IF 71 at 100MHz IF 74 at 50MHz IF 68.7 at 100MHz IF 69 at 100MHz IF SFDR (dB) 75 at 230MHz IF 79 at 230MHz IF 82 at 100MHz IF 93 at 50MHZ IF 86 at 100MHz IF 94 at 50MHz IF 82 at 100MHz IF 86 at 100MHz IF
Additional Products
TI Solution High-Speed Amplifier High-Speed Amplifier Digital-to-Analog Converter Digital Up/Down Converter Clock Distribution Circuit Digital Signal Processors Digital Signal Processor High-Speed Amplifier Device OPA695 THS9000/THS9001 DAC5686/DAC5687 GC5016 CDCM7005/CDC7005 TMS320C64xTM, TMS320C55xTM TMS320C67xTM THS4509 Device Characteristics Ultra-Wideband (1.4GHz), Current-Feedback, 2500V/s Slew Rate (G=+2) 50 to 350MHz Cascadeable Op Amp Optimized for High IF Frequencies Dual-Channel, 16-Bit, 500MSPS with Selectable 2x to 16x Interpolation Comms DAC Wideband, Quad, Channels Independently Configurable, Low Power Low-Phase Noise, Low-Skew Clock Synthesizer and Jitter Cleaner, 3.3V Supply 16-Bit, Fixed-Point DSPs, Up to 1GHz Clock Rates and 8-Giga MACs of Performance, With the Industrys Best Power-Consumption Benchmarks 32-Bit DSPs With Up to 1G FLOPS of Floating-Point Processing Performance Ultra-Low Noise, Wideband Amplifier
32

RF Applications
The EVM kits for the TRF6903 and TRF4903 are used to demonstrate a bidirectional RF link between the two boards and for prototyping by downloading new software code to the MSP430F449 using a JTAG connector. The schematic and board layouts can be used as a reference design if desired. A users guide is included. System Design Software EasyRF tools for TRF6903: Calculates values for PLL filter, LNA, PA matching, crystal switch caps, IF matching and S/H capacitors. EasyRF for TRF4903: Calculates values for PLL filter, PA matching, and crystal switch caps.
Industrial applications have had to wait many years for the availability of effective wireless solutions to overcome shop floor communications obstacles such as expensive cables and wiring costs. To date, efforts to simplify industrial interface has met with little success especially with more recent demands for lower power and overall system costs in applications such as metering, security systems, fire detectors and HVAC systems. In response to these market demands, TI has introduced a multiband radio frequency (RF) transceiver, TRF6903, and transmitter, TRF4903. These devices can wirelessly transmit and/or receive up to 64kbps of data for the 315, 433, 868, and 915MHz industrial, scientific and medical (ISM) bands. The devices can interface easily to a baseband processor such as TIs MSP430. A synchronized data clock, provided by the TRF6903 and TRF4903, is programmable for most common data rates, eases baseband processing and reduces code complexity. The devices work exceptionally well with various MSP430 microprocessor family members and has complete EVM kits and software available. The TRF6903 and TRF4903 are also single-chip solutions for low-cost multiband Frequency Shift Keying (FSK) or On/Off Keying (OOK) devices used to establish a frequency-programmable, half-duplex, bidirectional RF link. The devices operate down to 2.2V and are designed for low power consumption with a 0.6A standby current. For frequency hopping systems, these devices are the fastest and most efficient hoppers available. The TRF6903 and TRF4903 require no calibration when switching to a new frequency which makes them highly efficient at high data rates. Features Transceiver (TRF6903) and Transmitter (TRF4903) available 315, 433, 868 and 915MHz operation Apt for frequency hopping protocols Clock recovery with training recognition Standby current: 0.6A (typ) 2.2V to 3.6V operation Output power: +8dBm (typ) FSK/OOK modes of operation Data rates up to 64kbps Industrial temperature range: 40C to +85C Tools Available Free samples Evaluation modules at $149 each: MSP-TRF6903-DEMO: Two boards equipped with TRF6903 and MSP430F449 MSP-TRF4903-DEMO: Two boards equipped with TRF4903 and MSP430F449.
TRF6900 wireless connection for 315, 433, 868, and 915MHz operation.
To download these tools or for further information on ISM RF, please visit www.ti.com/ismrf

RF Applications
SLC_CAP 10.7MHz Ceramic or Discrete IF Filter MIX_OUT Mixer RFIN LNA Data Slicer Quadrature Demodulator OOK Switch Bit Synchronizer and Data Clock RX_DATA DCLK RSSI_OUT RX_FLAG Band-gap /A Counter /Div. CTRL 8 6 DET_OUT Brownout Detector /N Prescaler 32/33 Serial Interface CLOCK DATA STROBE STDBY MODE Ceramic Discriminator IF_IN1,2 CER_DIS LPF_IN LPF_OUT LPF Amplifier LEARN / HOLD
33
Limiter
RSSI
/B Counter
Lock Detect LOCK_DETECT PA_OUT PA Output Divider 1, 2, 3 VCO VCO_TUNE CP_OUT PFD CPs
/Ref 2...255 XTAL Switch XTAL XTAL_SW
TX_DATA
Loop Filter
TRF6903 functional block diagram.
Wireless Communication Devices for Industrial Applications

Device TRF6903 TRF6901 TRF6900A TRF5901 TRF4903 TRF4900 TRF4400
1Suggested
Description RF Transceiver RF Transceiver RF Transceiver RF Transceiver RF Transmitter RF Transmitter RF Transmitter
Frequency (MHz) (MHz) (min) (max) 315 915 860 930 850 950 902 928 315 915 850 950 420 450
Standards Supported FSK, OOK FSK, OOK FSK, Narrow-Band FM FSK, Narrow-Band FM FSK, OOK FSK, Narrow-Band FM FSK, Narrow-Band FM
Output Power (dBm) 8 8 5 5 8 7 7
Operating Voltage (V) (V) (min) (max) 2.2 3.6 1.8 3.6 2.2 3.6 3 3.6 2.2 3.6 2.2 3.3 2.2 3.6
Current (A) 0.6 0.6 0.5 0.5 0.6 0.5 0.5
Package PQFP-48 PQFP-48 PQFP-48 PQFP-48 TSSOP-24 TSSOP-24 TSSOP-24
Price1 $2.85 $2.70 $3.20 $3.20 $2.00 $1.90 $1.90
resale price in U.S. dollars in quantities of 1,000.
34

Input/Output Cards, Internal Communication/Interface/Isolation, Core Logic
Digital control sets the XTR300 into voltage-output or current-output mode. Error flags indicate over-temperature, load-error, and common-mode error. For most applications the setting of just two resistor values (R1 and R2), as well as the selection between current or voltage mode, is sufficient to accommodate a wide range of output signals of up to 25mA or 17.5V. For more exotic output ranges, modification of the reference voltage, VREF, and the gain resistor, ROS, is possible. The figure to the right (pg 35) shows a typical application for a singlechannel output of 10V or 20mA, depending on the XTR300s digital control for either voltage or current mode. A reference voltage is applied to the control DAC, DAC8531, and to the XTR300. The microcontroller performs device configuration, error monitoring and also provides the DAC input code. The analog output of the DAC8531 feeds the input of the XTR300, which then drives the load behind the terminal connector. For a floating load, switch S1 provides the option for establishing ground referred input signals to the instrumentation amplifier. The LC and RC networks perform RF- and LF-noise rejection. The multi-channel driver shown below uses a quad DAC, DAC8534, to control four XTR300 drivers, each providing a different output range.
Programmable Logic Controls (PLC) are widely used in industrial applications primarily in the areas of factory and process automation. PLC systems consist of different subsystems realized either as complete integrated systems or as base unit plus plug-in cards/ modules for different options. Industrial Analog I/Os PLCs and field extension modules control large numbers of electronic actuators, such as motors, solenoids and electronic ballasts. Due to the wide range of actuators and their different performance requirements, the XTR300 provides signals in the form of drive voltage or current with large voltage offset compliance. Typical voltage ranges are 5V, 10V, while current ranges include 20mA, 10mA, as well as 0-20mA and 4-20mA.
Analog Inputs Peripheral Bus Motor Control Industrial PC PLC Digital Inputs Analog Outputs Digital Outputs Intelligent Sensors Relays, Switches Other Peripheral
HMI
V dd
GND
V ss
IMON
Current Copy
CC V IN ROS V REF Gain Offset R2 XTR300 INA IAOUT Error Recog. Configguration Temp , Overld. V, I, OD
=
OPA
DRV V OUT / I OUT V SENSE+ G1 G2 V SENSE R1
XTR300 functional block diagram.
In addition to these common ranges, many proprietary signal interfaces exist, which all have one problem in common; tailoring the electronic drives design to match the required actuators input. To ease this design task, TI has developed an industrial analog current/voltage output driver, the XTR300. This device provides an operational amplifier working as a signal driver in the forward direction, and an instrumentation amplifier in the feedback loop.
Quad-channel drive with 4 x XTR300.
*Expected XTR300 release date, 2Q 2006.

Input/Output Cards, Internal Communication/Interface/Isolation, Core Logic
*
35
Single-channel drive with XTR300, VIN = 0 4V, VOUT = 10V or IOUT = 20mA.
*Expected XTR300 release date, 2Q 2006.
Device REF3140 DCV010515D DCV010505D TPS54110 Description Voltage Reference Dual Converter Dual Converter SWIFT Buck Converter Instrumentation Amp Isolation Amp Prog. Gain INA Low Noise Amp PWM Driver Linear Power Amp Linear Power Amp I/O Driver 16-Bit, 100kSPS ADC 16-Bit, 250kHz, CMOS Bipolar ADC 16-Bit, 1.25MSPS 24-Bit, 20kSPS ADC 16-Channel, 24-Bit ADC 16-Bit, 5s Settling Time 16-Bit, 10s Settling time Quad, 16-Bit DAC 16-Bit, Quad Channel 16-Bit, Multiplying PCI-PCI Bridge RS-485 M-LVDS Transceiver Half-Duplex Transceiver Gigabit Ethernet TRX Active Filter Analog Mux Free Design Software Key Features Drift = 20ppm/C, 4.097V, 0.2% Isolation Converter, +5VIN, 15VOUT Isolation Converter, +5VIN, 5VOUT Adjustable Output (0.9V 3.3V), 1.5A Gain = 1 to 1000, CMRR > 110dB, 8-Pin Isolation = 2400V, Output = 10V Gain of 1, 10, 100, 1000, Precision VN = 3nV, CMRR > 120dB, VS = 536V 3A Max, High Efficiency, Tiny Package 2A, RRIO 300mV to Rail, Adj Current Limit 2.4A, RRO 200mV to Rail, Thermal Protection 10V, 20mA, Input/Output Power = 2mW, 8-Pin, SFDR = 86dB, Power = 82mW 250kHz Sampling Rate, 2.0LSB Max INL, 1LSB Max DNL, 16-Bit No Missing Code Pseudo-Bipolar, Differential Input, VREF to VREF 90dB SNR, 95dB THD at 100kHz Input Power = 155mW, 8-Pin, SFDR = 100dB, 125kSPS, Auto-scan Rate: 23.7kSPS, 24-Bit NMC Output = 10V, INL = 0.0015% Power < 2mW, Output = 2.5V Low Power, 16-Bit Swing DAC Power Supply +2.7V to +5.5V 0.5LSB DNL, 1LSB INL, Serial Input 66MHz, 32-Bit Failsafe, Extended Common Mode, RX EQ 100Mbps, 8-Pin Package 5V Supply, MSOP-8, 10Mbps 10-Bit Interface, 1 1.6Gbps Serial Low-, High- or Band-Pass Filter Analog Input = 15V Design Low Pass Filters, Quick, Easy Benefits Very Low Drift, Tiny Package Low Noise, Small Board Area Low Noise, Small Board Area Very Easy to Use, Flexible Output Very Low Power No External Components Required Small Package Very Low Noise, Small Package Single 5V Supply, Tiny Package Unity Gain Stable, 2.7V to 5.5V supply, Shutdown, Small Package Single 5V, Tiny Package, Complete Solution Multipurpose I/O Driver for All Industrial I/O Voltage Currents Single 5V Supply, Power Only 2mW, Single 5V Supply for Bipolar SPI Compatible Serial Output with Daisy-Chain (TAG) Feature, Uses Internal and External Reference High-Speed Parallel Interface, Single 5V Analog Supply, Low Power, Zero Latency Excellent Performance, Only 7.5mW, Single 5V Supply 16 SE or 8 Diff, 2.8VRMS at 1.8kSPS, Fixed or Auto Channel Scan Small Package Single 5V, Small Package Excellent Price/Performance Ratio, Double Buffered Input Architecture Power-On Reset to Zero-Scale, Schmitt-Triggered Inputs 4-Quadrant Multiplying Reference, 10V VREF, 3-Wire Interface Only RX with EQ in Industry First M-LVDS Complete Transceiver Thermal Shutdown Protection, Low Supply Current Power < 200mW Fully Integrated Active Filter Free, www.ti.com/filterpro Other TI Solutions REF02, REF102 DCP010515 DCP010505 TPS64200 INA128 ISO122 PGA203 OPA350, OPA725 DRV104 OPA647 OPA549 ADS8320 ADS7809 ADS8508/7808 ADS8412, ADS8402 ADS1252 DAC7741 DAC7641 DAC8532 PCI2250 SN65HVD23 SN65MLVD202A TLK1501, TLK1201 RC Filter
Preview devices are listed in bold blue.
Amplifiers
INA118 ISO124 PGA204 OPA227 DRV591 OPA567 OPA569 XTR300 ADS8325 ADS8509 ADS8406 ADS1251 ADS1258 DAC7731 DAC7631 DAC8534 DAC8554 DAC8811
Data Converters
Interface
PCI2050B SN65HVD24 SN65MLVD200A SN65HVD485E TLK2201
Other
UAF42 MPC50x FilterProTM
36
Field Bus Systems

Factory Communications
simply all-digital, serial, two-way communication systems that serve as a Local Area Networks (LAN) for factory/plant instrumentation monitoring and device control.
Controller
Industrial Automation is the computerization of manufacturing and process steps, which workers cant carry out as fast, as precise or as often as a machine. Traditionally Industrial Automation has been separated into two major categories: Factory Automation and Process Automation.
Bus Interface
Isolation
S1 S2 S3 3 Axis Robots
Acid Alkali Heating
Transceiver Transceiver Bus Interface
Field Bus Transceiver Bus Interface Transceiver Bus Interface Sensor
Transceiver Bus Interface
Batch pH setting Reactor
W eights
Conveyor Belts
Scales
Storage Tank
Cooling
Process Control Facility
Recycled W aste
Device Configuration
Motor Starter
Motor Controller
Factory Automation.
Process Automation.
Process automation system.
Factory Automation senses and drives physical quantities such as pressure, temperature, flow, force vibration, mass and density. Applications typically require 10-12 bits of resolution and communicate at rates between 50 and 400kbps. However, there are several technologies that communicate at much faster signaling rates, such as PROFIBUS DP running at 12Mbps. Process Automation performs compositional measurements such as conductivity, pH and chemical analysis in addition to physical quantities as in Factory Automation. Applications typically require 16-bits of resolution and communication rates between 10 and 50kbps.
Requirements in Industrial Environments Many hazards threaten the various electrical devices and it is difficult to encase or protect interface cabling. Both device and network must be able to maintain operation even under the most undesirable conditions. Common hazards include: Power surges (e.g. of nearby motors) Ground potential differences (e.g. due to equalizing currents) Electrostatic Discharge (ESD) Excessive number of nodes (e.g. in flow control many sensors and actuator) Long cable lengths in large factories In order to maintain operation under such circumstances, devices need the following properties: Immunity to power surges (transient suppression) Wide common-mode range High ESD protection Low unit load, allowing for many nodes High output drive, high sensitivity, receiver equalization, pre-emphasis
Nodes in Industrial Automation environments are grouped into three distinct families: controllers, sensors and actuator. As the name suggests, controllers are used to manage variables such as temperature based on pre-determined values and information provided by sensors. If the difference between a predetermined and sensed value exceeds a certain limit, the controller tries to manipulate the variable through an actuator such as a cooler. The number of nodes and the distance separating these nodes can vary greatly, which creates the need for specialized communications called industrial networks. In the 1940s, process instrumentation used 3 to 15psi pressure signals for monitoring control devices. By the 1960s, the first standardized communication method was introducedthe 4-20mA technique of pure analog current-loop signaling. By the nature of the technology, every node requires its own set of cabling between the controller and itself, which creates a maze of cables, yet it is still used extensively in industrial networks. In the 1970s, industrial applications began using programmable logic controllers (PLCs) and digital computers. By the mid 1980s, industrys quest for a standardized all-digital field-bus became a reality. However, major industrial companies and countries, mainly Germany, France and the U.S., did not let go of their de facto standards, so multiple competing standards came into use such as PROFIBUS, InterBus, DeviceNet and others. These field-buses are Industrial Solutions Guide
Download Interface Selection Guide at:
interface.ti.com
Field Bus Systems

5V, RS-485 Transceivers with Integrated Transient Suppression
SN65LBC184, SN65LBC182
Get samples, datasheets and app reports at: www.ti.com/sc/device/SN65LBC184, www.ti.com/sc/device/SN65LBC182
37
Extended Common Mode Transceivers with Optional Receiver Equalization

SN65HVD2x
Get samples, datasheets and app reports at: www.ti.com/sc/device/SN65HVD20
The SN65LBC184 differential data line transceiver is available in the trade-standard footprint of the SN75176 with built-in protection against high-energy noise transients. This feature provides a substantial increase in reliability for better immunity to noise surges coupled to the data cable over most existing devices. Use of these circuits provides a reliable low-cost, direct-coupled (with no isolation transformer) data line interface without requiring any external components. The SN65LBC184 can withstand over-voltage transients of 400W peak (typical). The conventional combination wave called out in IEC 61000-4-5 simulates the over-voltage transient and models a unidirectional surge caused by inductive switching and secondary lightning transients. Key Features (LBC184) Integrated transient voltage suppression Standard RS-485 common-mode voltage range: 7V to 12V JEDEC and IEC ESD protection: 30kV IEC 61000-4-2, contact discharge 15kV IEC 61000-4-2, air-gap discharge 15kV EIA/JEDEC, human body model Up to 128 nodes on a bus (1/4 unit-load)
The SN65HVD2x device series offers a very wide input voltage operating range. The RS-485 standard requires functionality at DC-levels at the receiver input between 7V and +12V (7V plus swing of up to 5V). These devices nearly triple this requirement and are fully functional between 20V and +25V, while surviving 27V and transients up to 60V. Key Features Common-mode voltage range (20V to +25V) more than doubles TIA/EIA-485 requirement Best-in-class ESD protection in the industry: 16kV HBM Up to 256 nodes on a bus (HVD21, 22 and 24) (1/8 unit-load) Optional receiver equalization (HVD23 and HVD24)
1.2V
RS-485 Standard
Common-Mode Voltage 11V Common-Mode 10V 5V Voltage 2.7V Common-Mode Voltage 7V ground 6V 7V noise shift
+200mV 200mV
Receiver Sensitivity Levels Receiver Sensitivity Levels
+200mV 200mV
RS-485 standard operation.

25V
HVD2x with extended VICR
Common-Mode Voltage 24V 23V
+200mV 200mV
Receiver Sensitivity Levels
DE
4 D
Common-Mode Voltage 2.7V 18V Common-Mode >20V ground Voltage noise shift 19V 20V
+200mV 200mV
Receiver Sensitivity Levels
HVD2xs wide common-mode voltage range.

20 V SN65HVD2x +25 V
2 RE R 1 6 A 7 B BUS
20 V 15 V 10 V 5 V 0 V 5V 10 V 15 V 20 V 25 V
Functional logic diagram (positive logic). SN65HVD2x extended common-mode voltage range.
V VP 1/2 VP 1.2 s t
Numbers SN65HVD20 SN65HVD21 SN65HVD22 SN65HVD23 SN65HVD24 Cable Length and Signaling Rate Up to 50m at 25Mbps Up to 150m at 5Mbps (with Slew Rate Limit) Up to 1200m at 500kbps (with Slew Rate Limit) Up to 160m at 25Mbps (with Receiver Equalization) Up to 500m at 3Mbps (with Receiver Equalization) Number of Nodes Up to 64 Up to 256 Up to 256 Up to 64 Up to 256
50s
Surge waveform combination wave.
38
Field Bus Systems

3.3V and 5V CAN Transceivers
SN65HVD23x, SN65HVD251
Get samples, datasheets, EVMs and app reports at: www.ti.com/sc/device/PARTnumber (Replace PARTnumber with SN65HVD230, SN65HVD231, SN65HVD232, SN65HVD233, SN65HVD234, SN65HVD235 or SN65HVD251)
PROFIBUS Transceiver
SN65HVD1176
Get samples, datasheets and app reports at: www.ti.com/sc/device/SN65HVD1176
PROFIBUS is the most frequently used process-automation bus in Europe, and is growing in use in other regions. Despite this fact, the selection of suitable transceivers is very limited. In fact, for many years, TIs SN65ALS1176 has been the only device approved by the PROFIBUS User Organization. The reason for this is that a high output drive is required (minimum 2.1V differential) and at the same time, the bus-capacitance must not exceed 10pF. These requirements actually oppose each other and the combination is hard to achieve. The SN65HVD1176 fulfills all PROFIBUS requirements, plus offers very good noise rejection to common-mode noise and has significantly improved timing parameters. Key Features Standard RS-485 common-mode voltage range: 7V to 12V High ESD protection of 10kV HBM Up to 160 nodes on a bus (1/5 unit-load) High output drive: differential output exceeds 2.1V
The SN65HVD251 (5V) and SN65HVD23x (3.3V) families of CAN transceivers are intended for use in harsh environment applications. They feature cross-wire, loss-of-ground, over-voltage and overtemperature protection, wide common-mode range and can withstand common-mode transients of 200V. The SN65HVD230/1/2 operate over a 2V to 7V CMR on the bus, and can withstand common-mode transients of 25V. SN65HVD233/4/5 and SN65HVD251 operate over a 7V to 12V CMR and will withstand transients of 100V and 50V, respectively. Key Features (SN65HVD251) Drop-in improved replacements for the PCA82C250 and PCA82C251 Bus-fault protection of 36V Bus-pin ESD protection exceeds 14kV HBM High input impedance allows up to 120 SN65HVD251 nodes Meets or exceeds the requirements of ISO 11898 Applications CAN data buses: DeviceNet data buses Smart distributed systems (SDS) SAE J1939 standard data bus interface NMEA 2000 standard data bus interface ISO 11783 standard data bus interface
VCC VREF
R RE DE D
VCC B A GND
HVD1176 functional block diagram.
D RS R CANH CANL
Functional diagram (positive logic).
ISO 11898 Specification

Application Specific Layer
Data-Link Layer Logic Link Control Medium Access Control Physical Signaling Physical Layer Physical Medium Attachment Medium Dependent Interface
Implementation DSP or MCU Embedded Stand-Alone CAN Controller
SN65HVD251
CAN Bus-Line
Field Bus Systems

High-Performance 1394-1995 Link Layer for Industrial and Bridge Applications
TSB42AC3
Get samples, datasheets, EVMs and app reports at: www.ti.com/sc/device/TSB42AC3
39
USB-to-Serial Bridge
TUSB3410
Get samples, datasheets, EVMs and app reports at: www.ti.com/sc/device/TUSB3410
The TSB42AC3 is a 1394-1995 general-purpose link layer ideal for a wide range of applications. The TSB42AC3 provides a high-performance interface with the capability of transferring data between the 32-bit host controller and the 1394 PHY-link interface. The 1394 PHY-link interface provides the connection to the 1394 device. The LLC provides the control for transmitting and receiving 1394 packet data between the FIFO and PHY-link interface at rates of 50 (backplane only), 100, 200 and 400Mbit/s. Key Features Generic 32-bit, 50MHz host bus interface Programmable 10K byte total for asynchronous, isochronous and general FIFO Separate ACK FIFO register decreases SCK-tracking burden on the host Additional programmable status output to pins Completely software compatible with the TSB12LV01B IEEE 1149.1 JTAG interface to support board level scan testing Applications Motor/motion/process control Industrial imaging
FIFO LINK CORE Transmitter ACK H o s t Host Processor I n t e r f a c e ATF P h y s i c a l I n t e r f a c e Serial Bus
The TUSB3410 provides an easy way to move your UART device to a fast, flexible USB interface by bridging between a USB port and an enhanced UART serial port. The TUSB3410 contains all the necessary logic to communicate with the host computer using the USB bus. The TUSB3410 can be used to build an interface between a legacy serial peripheral device and a PC with USB ports, such as a legacy-free PC. An evaluation module can jump-start your USB development, or you can use it as a complete USB-to-RS-232 converter. Key Features Built-in, two-channel DMA controller for USB/UART bulk I/O Enhanced UART features including programmable software/ hardware flow control and automatic RS-485 bus transceiver control, with and without echo
12 MHz Clock Oscillator PLL and Dividers 24 MHz 8052 Core
8 DP, DM USB TxR 10K x 8 ROM 16K x 8 RAM 2K x 8 SRAM 8 8
8 2 x 16-Bit Timers 8 Port 3 8 8 4 P3 (4, 3, 1, 0)
I2C Controller DMA-1 DMA-3
I2C Bus
8 CPU-I/F Susp./Res. USB SIE 8 8 UBM USB Buffer Manager 8 SIN
Cycle Timer CRC
UART-1
RTS CTS DTR DSR SOUT
ITF
Cycle Monitor
TDM Control Logic
IR Encoder
GRF
Receiver
M U X
SOUT/ IR_SOUT
Configuration Registers (CFR)
M U X
IR Encoder
SIN/ IR_SIN
TSB42AC3 functional block diagram.
The TUSB3410 can support a total of three input and three output (interrupt, bulk) endpoints.
40
Field Bus Systems

Quad UART with 64-Byte FIFO
TL16C754B
Get samples, datasheets and app reports at: www.ti.com/sc/device/TL16C754B
USB-Based Controller with MCU GPIO

TUSB3210
Get samples, datasheets, EVMs and app reports at: www.ti.com/sc/device/TUSB3210
The TUSB3210 is a USB-based controller with a general-purpose, industry-standard 8052 MCU and a 32 GPIO. It contains 8K x 8 RAM space for application development. The TUSB3210 is programmable, making it flexible enough to use for a variety of general USB I/O applications. Key Features Supports 12Mbps USB data rate (full speed) Supports USB suspend/resume and remote wake-up operation Integrated 8052 microcontroller
12 MHz Clock Oscillator
Texas Instruments wide portfolio of space-saving, performanceenhancing UARTs are pin-for-pin compatible with many leading UART manufacturers devices. Key Features 3.3V and 5V operating voltages available 64-byte programmable trigger-level FIFO buffering Up to 3.2Mbps data transfer rate Applications Industrial automation controls Base stations Cell phones PCs
PLL and Dividers
8052 Core
Reset, Interrupt and WDT
RSTI
Bus Interface
USB-0 USB TxR 6K x 8 ROM 8 8 2x16-Bit Timers Port 0 8 Port 1 8 512 x 8 SRAM Port 2 8 Port 3 Logic CPU - I/F Suspend/ Resume USB SIE 8 UBM USB Buffer Manager I 2C Controller I2C Bus 8 8 P2.[7:0] P3.[7:0] 8 P1.[7:0] P0.[7:0]
Modem Control Signals Control Signals Status Signals Control and Status Block Divisor Control Signals Status Signals UART_CLK Receiver FIFO 64-Byte Receiver Block Logic Vote Logic RX RX Baud Rate Generator
8K x 8 RAM [1]
Transmitter FIFO 64-Byte

Channel A Channel B Channel C Channel D
Transmitter Block Logic
TX TX
TDM Control Logic
TL16C754B functional block diagram.
TUSB3210 functional block diagram.
USB Port Transient Suppressors

SN65220, SN65240
Get samples, datasheets and app reports at: www.ti.com/sc/device/SN65220, www.ti.com/sc/device/SN65240
USB 1.1 Host or Hub-Port Transceiver 27 A 15k GND GND SN65220 or 1/2 SNx240 SN65220 or 1/2 SNx240 27 D+ D+ A 27 SN65220 or 1/2 SNx240
15k
USB 1.1 Downstream Transceiver
The SN65220 is a single transient voltage suppressor and the SN65240 is a dual transient voltage suppressor designed to provide electrical transient protection to full-speed USB ports. Key Features Designed to protect USB host, hub or peripheral ports Packaging: Tiny WCSP Chip-Scale
15k 27
B D D
15k
SN65220 functional block diagram.
Field Bus Systems

Dual Channel 16-Byte FIFOs UART
TL16C2550
Get samples, datasheets and app reports at: www.ti.com/sc/device/TL16C2550
41
Dual Channel 64-Byte FIFOs UART

TL16C752B
Get samples, datasheets and app reports at: www.ti.com/sc/device/TL16C752B
The TL16C2550 is a dual universal asynchronous receiver and transmitter (UART). It incorporates the functionality of two TL16C550D UARTs, each UART having its own register set and FIFOs. The two UARTs share only the data bus interface and clock source, otherwise they operate independently. Another name for the UART function is Asynchronous Communications Element (ACE), and these terms will be used interchangeably. Key Features Up to 1.5Mbps (5V), 1.25Mbps (3.3V) and 1Mbps (2.5V) operation Programmable auto-RTS and auto-CTS Programmable baud rate generator Packaging: 5mm x 5mm 32-pin QFN (RHB) and 48-pin QFP Applications Point-of-sale terminals Gaming terminals Portable applications Router control Cellular data
The TL16C752B is a dual universal asynchronous receiver/transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 3Mbps. The TL16C752B offers enhanced features. It has a transmission control register (TCR) that stores receiver FIFO threshold levels to start/stop transmission during hardware and software flow control. With the FIFO RDY register, the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows onboard diagnostics. The TL16C752B is available in a 48-pin PT (LQFP) package. Key Features TI patented programmable auto-RTS and auto-CTS XON/XOFF software flow control Up to 3Mbps baud rate at 3.3V Programmable and selectable transmit and receive FIFO trigger levels Applications Telecommunication routers Handheld terminals Mobile computing Factory automation
UART Channel A A2-A0 D7-D0 CSA CSB IOR IOW INTA INTB TXRDYA TXRDYB RXRDYA RXRDYB RESET BAUD Rate Gen XTAL1 XTAL2 Crystal OSC Buffer 16 Byte Tx FIFO UART Regs Data Bus Interface BAUD Rate Gen 64 Byte Rx FIFO Rx Tx TXA CTSA OPA, DTRA DSRA, RIA, CDA RTSA RXA
UART Channel A UART Channel B 16 Byte Tx FIFO UART Regs 64 Byte Rx FIFO Rx Tx TXB CTSB OPB, DTRB DSRB, RIB, CDB RTSB RXB A2-A0 D7-D0 CSA CSB IOR IOW INTA INTB TXRDYA TXRDYB RXRDYA RXRDYB RESET BAUD Rate Gen XTAL1 XTAL2 Crystal OSC Buffer 64 Byte Tx FIFO UART Regs Data Bus Interface BAUD Rate Gen 64 Byte Rx FIFO Rx Tx TXA CTSA OPA, DTRA DSRA, RIA, CDA RTSA RXA
UART Channel B 64 Byte Tx FIFO UART Regs 64 Byte Rx FIFO Rx Tx
VCC GND
TXB CTSB OPB, DTRB DSRB, RIB, CDB RTSB RXB
TL16C2550 functional block diagram.
VCC GND
TL16C752B functional block diagram.
42
Field Bus Systems

Channel(s) 2 2 1 1 2 1 1 2 2 4 4 1 2 2 4 4 1 2 FIFOs 16-Byte 16-Byte None None None 16-Byte 16-Byte 16-Byte 16-Byte 16-Byte 16-Byte 16-, 64-Byte 64-Byte 64-Byte 64-Byte 64-Byte 16-, 64-Byte 16-Byte Voltage(V) 2.5/3.3/5 2.5/3.3/5 5 5 5 3.3/5 2.5/3.3/5 5 5 5 5 5 3.3 2.5/3.3/5 3.3/5 2.5/3.3/5 3.3/5 5 Characterized Temp (C) 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70 0 to 70 0 to 70 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70, 40 to 85 0 to 70 0 to 70 Package(s) 32-QFN, 44-PLCC, 48-TQFP 32-QFN, 44-PLCC 40-DIP, 44-PLCC 68-PLCC 68-PLCC 40-DIP, 44-PLCC 48-LQFP, 48-TQFP 32-QFN, 48-LQFP, 48-TQFP 68-PLCC 68-PLCC, 80-TQFP 68-PLCC, 80-LQFP 68-PLCC, 80-LQFP 44-PLCC, 64-LQFP 48-LQFP, 48-TQFP 32-QFN, 48-TQFP 68-PLCC, 80-LQFP 80-LQFP 100-BGA, 100-LQFP 80-QFP Description Dual UART with Programmable Auto-RTS and Auto-CTS Dual UART with Programmable Auto-RTS and Auto-CTS Single UART Single UART with Parallel Port Dual UART with Parallel Port Single UART with Hardware Auto Flow Control Single UART with Hardware Auto Flow Control Dual UART with Parallel Port, Recommend TL16C552A Dual UART with Parallel Port Quad UART, Recommend TL16C554A Quad UART with Hardware Auto Flow Control Single UART with Hardware Auto Flow Control Lower Power Modes Dual UART with Hardware Auto Flow Control Lower Power Modes Dual UART with Hardware Auto Flow Control Lower Power Modes, RS-485 and IrDA interface Dual UART with Hardware Auto Flow Control Lower Power Modes Dual UART with Hardware Auto Flow Control Lower Power Modes Single UART with PCMCIA Interface Dual UART with Selectable IR & 1284 Modes Price1 Call Call $1.50 $2.50 $2.55 $1.75 $1.75 $3.90 $3.85 $6.05 $6.00 $3.70 $3.10 Call $8.35 Call $5.90/$6.10 $6.10
Device TL16C2550 TL16C2552 TL16C450 TL16C451 TL16C452 TL16C550C TL16C550D TL16C552 TL16C552A TL16C554 TL16C554A TL16C750 TL16C752B TL16C752C TL16C754B TL16C754C
TL16PC564B/BLV TL16PIR552
1Suggested
Preview devices appear in bold blue.
Isolation
Digital Coupler and Isolation Amplifiers
There are many applications where it is desirable, even essential, that a sensor not have a direct (galvanic) electrical connection with the system to which it is supplying data in order to avoid either dangerous voltages or currents from one half of the system from damaging the other half. Such a system is said to be "isolated", and the area which passes a signal without galvanic connections is known as an "isolation barrier". Isolation barrier protection works in both directions, and may be needed in either half of the system, sometimes both. Common applications requiring isolation protection are those where sensors may accidentally encounter high voltages, and the system it is driving must be protected. Or a sensor may need to be isolated from accidental high voltages arising downstream in order to protect its environment: examples include prevention of explosive gas ignition caused by sparks at sensor locations or protecting patients from electric shock by ECG, EEG and EMG test and monitoring equipment. The ECG application may require isolation barriers in both directions: the patient must be protected from the very high voltages (>7.5kV) applied by the defibrillator, and the technician handling the device must be protected from unexpected feedback. Applications for Isolation Amplifiers Sensor is at a high potential relative to other circuitry (or may become so under fault conditions) Sensor may not carry dangerous voltages, irrespective of faults in other circuitry (e.g. patient monitoring and intrinsically safe equipment for use with explosive gases) To break ground loops Isolation Amplifier Design
43
Obstacles in isolation amplifier design include offset, drift, gain accuracy, and nonlinearity or distortion. The high-performance isolation amplifier applies either linear optocouplers (LOCs), or modulators with digital capacitive isolation, either of which is implemented differentially to increase linearity over a large signal range. Isolation amps use dual-feedback circuit topology to significantly reduce distortion. While feedback across the barrier corrects for these errors, it only does so as long as the circuit on each side of the barrier is an exact match. This is difficult to achieve as the circuits are not on the same piece of silicon. In integrated circuit isolation amplifiers, the output and feedback demodulator are made from adjacent die from the same silicon wafer, allowing for better matching than discrete designs.
10V REF102 Isothermal Block with 1N4148 R1 27k R2 1M R4
+15V +15V 15V +15V 15V +15V In ISO124 Gnd V OUT
RG R5 50
INA128
15V
Thermocouple
R3 100 R
100 Zero Adjust
Isolated temperature measurement with dual supplies. Isolated temperature measurement with single supply.
VEXC R1 C1 VIN2 VSA R2 C2 VSO C3 PGA309 VIN1 GNDA
SDA EEPROM SCL VO GNDD R3 R4 C4 R6
VREG VREF
VS In XTR115 IOUT IREF
4-20mA
+VS1
Bridge Sensor
RCV420
In ISO 124
+VS2 VS2 VOUT
GND
Pressure measurement with digital calibration via isolated 4-20mA current loop.
VS1
44
Isolation
Digital Coupler and Isolation Amplifiers
3.3V High-Speed Digital Isolators
ISO721
Get samples, datasheets and app reports at: www.ti.com/sc/device/ISO721
Galvanic Isolation Solutions

System designers must contend with poor power quality, ground faults, and lightning strikes interfering with or disrupting system performance. Additionally, the distance between the nodes on a network can be substantial and often AC outlets from different ground domains power the nodes. The potential difference between these ground domains may include a dc bias, 50 or 60Hz AC harmonics, and various transient noise components. If these grounds are connected together by a cable logic ground or shielding, a ground loop can exist and current will flow into the cable. Ground-loop currents can have severe effects on a network, including the degradation of data, excessive EMI, component damage, and when the potential difference is large enough, a human electrical hazard. New techniques that use magnetic coupling for isolation may still share the deficiencies of the older solutions such as the absence of a fail-safe output, an inability to operate with DC-only signals and a restricted operating temperature range. Additionally, new concerns associated with the inductors susceptibility to external magnetic fields and curtailed operating life under high voltage conditions may arise. TI isolation solutions are designed to eliminate problems associated with existing isolation technologies. Problems such as high power consumption, no fail-safe output, low signaling rates and high pulse-width distortion are common. When using optocouplers, the low efficiency with which the electro-optical conversion occurs is especially problematic as the amount of current required to turn on the phototransistor increases with the age of the part. This is due to the LEDs reduction of light emission over time, which is accelerated by high operating temperatures. The ISO721 and ISO722 provide isolation solutions solving all of these problems. Other isolation products currently in development at TI include multi-channel isolators, isolated CAN and RS-485 transceivers, isolated op amps, isolated data converters and an isolated gate controller interface.
The ISO721 digital isolator is a logic input and output buffer separated by a silicon oxide (SiO2) insulation barrier that provides galvanic isolation of up to 4000V. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. A binary input signal is conditioned, translated to a balanced signal, then differentiated by the capacitive isolation barrier. Across the isolation barrier, a differential comparator receives the logic transition information, then sets or resets a flip-flop and the output circuit accordingly. A periodic update pulse is sent across the barrier to ensure the proper dc level of the output. If this dc-refresh pulse is not received for more than 4s, the input is assumed to be unpowered or not functional, and the fail-safe circuit drives the output to a logic high state. Key Features 4000V isolation Fail-safe output Signaling rate up to 100Mbps UL 1577, IEC 60747-5-2 (VDE 0884, Rev. 2), IEC 61010-1 and CSA Approved 25kV/s transient immunity
DC Channel
Isolation Barrier Filter
OSC + PWM
PWD VREF Carrier Detect BIAS POR Data MUX (722 Only) EN OUT
POR
IN
Input + Filter AC Channel
AC Detect VREF 3-State Output Buffer
ISO721 functional block diagram.

Power Management Solutions (Continued)
Application-Specific Multi-Output Solutions Step-Up DC/DC Converters Audio Supply Inductorless DC/DC Regulators (Charge Pumps) Noise-Sensitive RF Circuitry Battery Management Photoflash Capacitor Chargers Photo Flash System Voltages
45
Linear Regulators (LDO)

Device TPS79718 TPS71533 TPS76301 TPS72118 TPS79301 TPS79901 TPS71157 TPS73601 TPS79501 TPS79601 TPS61041 TPS61042 TPS61060 Description 10mA, 1.2A Micro-Power LDO in SC-70 50mA, 3.2A Micro-Power LDO in SC-70 100mA, Low-Cost LDO in SOT-23 150mA, Low-Noise, Low-VIN LDO in SOT-23 200mA, Low-Noise, High PSRR LDO in SOT-23 and WCSP 200mA, Ultra-Low Noise, High PSRR LDO in WCSP 250mA, Dual Output, Ultra-Low Noise, High PSRR LDO in WCSP 400mA, Cap-Free, Reverse-Leakage Protection LDO in SOT-23 and QFN 500mA, Low-Noise, High PSRR LDO in SOT-223 1A, Low-Noise, High PSRR LDO in SOT-223
White LED Drivers
LED Light
Application-Specific Multi-Output Solutions
LCD Color Display
DC Inputs Linear Regulators Battery Charge Management USB Step-Down DC/DC Converters Lithium-Ion Protection and Authentication for Batteries Supervisory Circuits (Voltage Supervisors) Memory
LED Backlight and Camera Flash Solutions

250mA Switch Boost Converter, up to 28V in SOT-23 500mA Switch, Current-Regulated Boost Converter in QFN 375mA Switch, Current-Regulated, Synchronous Boost Converter in QFN and WCSP REG71055 Low-Cost Charge Pump for Up to 3 Parallel White LED in ThinSOT-23 TPS60230 5-Channel, Current-Regulated White LED Charge Pump in QFN TPS60231 3-Channel, Current Regulated White LED Charge Pump in QFN TPS65552A Xenon FLASH Charger for Digital Still Cameras with Integrated IGBT Driver TPS61020 1.5A Switch Boost Converter in QFN for White LED FLASH
Battery Fuel Gauges Rechargeable Battery
I 2C
DSP, C
Reset
Power Management Solutions

Battery Chargers
Device bq2002 bq2057 bq24100 bq24200 bq24010 bq24020 bq24030 bq25010 bq26220 bq27000 bq27200 bq20z80 bq2084 bq26150 TPS62200 TPS62220 TPS62300 TPS62050 TPS62040 TPS64200 TPS62110 TPS63700 Description NiMH/NiCd Charger for Current-Limited Power Supplies 1- to 2-Cell Linear Li-Ion Charge Controller in MSOP 1- to 3-Cell Li-Ion Fully Integrated Switch-Mode Charger in QFN 1-Cell Li-Ion Fully Integrated Charger for Current-Limited Power Supplies 1-Cell Li-Ion Fully Integrated Charger in QFN 1-Cell Li-Ion Fully Integrated Charger for AC/DC Adapter and USB in QFN 1-Cell Li-Ion Charger for AC/DC Adapter and USB with Dynamic Power Path Management in QFN Single-Chip Li-Ion Charger with Adjustable DC/DC Converter in QFN 1- to 2-Cell Li-Ion Battery Monitor with HDQ Interface 1- to 2-Cell Li-Ion Battery Fuel Gauge with HDQ in QFN and WCSP 1- to 2-Cell Li-Ion Battery Fuel Gauge with I2C in QFN and WCSP 2- to 4-Cell Li-Ion SMBus Battery Fuel Gauge with Impedance TrackTM Technology 2- to 4-Cell Li-Ion SMBus Battery Fuel Gauge CRC-Based Battery Authentication IC 300mA, 1MHz Step-Down Converter with 12A Quiescent Current in SOT-23 400mA, 1.25MHz Step-Down Converter with 15A Quiescent Current in ThinSOT-23 500mA, 3MHz High-Accuracy Step-Down Converter with 1H inductor in WCSP and QFN 800mA, 10V VIN Step-Down Converter with 12A Quiescent Current in QFN-10 1.2A, 1.25MHz Step-Down Converter with 18A Quiescent Current in QFN-10 3A Step-Down Controller in SOT-23 Adjustable, 17VIN and 1.5AOUT Step-Down DC/DC Converter in 4x4 QFN Adjustable, Up to 15VOUT, Inverting DC/DC Converter in 3x3 QFN
DC/DC Boost (Step-Up) Solutions

TPS61041 TPS61040 TPS61070 TPS61010 TPS61020 TPS61030 TPS61045 TPS65110 TPS65120 TPS65130 TPS65100 TPS3836E18 TPS3808G01 TPS3801-01 TPS3110E12 TPS3806I33 TPS65010 250mA Switch Boost Converter, Up to 28V in SOT-23 400mA Switch Boost Converter, Up to 28V in SOT-23 600mA Switch Boost Converter in ThinSOT-23 for 1- and 2-Cell Alkaline Applications 1A Switch Boost Converter 1.5A Switch Boost Converter in QFN 4A Switch Boost Converter in QFN 375mA Switch Boost Converter, Up to 28V in QFN 3-Channel Small Form-Factor LTPS Display Power Supply in QFN 4-Channel Small Form-Factor TFT Display Power Supply in QFN 2-Channel, Positive/Negative Power Supply for OLED Displays in QFN 4-Channel Large Form-Factor TFT Display Power Supply 250nA, Supply Voltage Supervisor in SOT-23 2.4A, Programmable Delay Supply Voltage Supervisor in SOT-23 9A, Ultra-Small Supply Voltage Supervisor in SC-70 1.2A, Dual Supply Voltage Supervisor in SOT-23 3A, Dual Supply Voltage Supervisor in SOT-23 1-Cell Li-Ion Charger, 1.2A and 400mA Step-Down Converter, 2 LDO with I2C in QFN
Display Power Solutions
Battery Fuel Gauges
Supply Voltage Supervisors
Battery Authentication and Protection DC/DC Buck (Step-Down) Solutions for Core and I/O
Complete Power Management Units
46
Backplane Power Switches USB ExpressCard USB Peripheral PCMCIA Hot Swap and Power-over-Ethernet Non-Isolated Plug-in Module POLA DC/DC Controller
Fusion Digital Power Solutions Power Factor Correction PWM Controllers MOSFET Drivers
System Voltage
AC Line
48V
48V or 24V DC Input
Isolated Plug-in Module
Hard Drive DC/DC Converter Low Dropout Regulator Supply Voltage Supervisor
Memory
System Power Solutions for Industrial Applications

Device TPS40057 TPS40061 TPS40100 TPS40200 TPS43000 UC3572 TPS54110 TPS54310 TPS54350 TPS54610 UCC38C42 UCC3809 UCC3813 Description Wide Input (8V-40V) Up to 1MHz Frequency Synchronous Buck Controller, Source/Sink with Prebias Wide Input (10V-55V) Up to 1MHz Frequency Synchronous Buck Controller, Source/Sink Midrange Input (4.5V-18V) Synchronous Buck Controller with Advanced Sequencing and Output Margining 8-Pin SO, 4.5-52V Cost Optimized Buck Multi-Topology (Buck, Boost, Sepic) High Frequency DC/DC Controller Negative Output Flyback Pulse Width Modulator 3V to 6V Input, 1.5A Output Synchronous-Buck PWM Switcher 3V to 6V Input, 3A Output Synchronous-Buck PWM Switcher with Integrated FETs 4.5V to 20V Input, 3A Output Synchronous-Buck PWM Switcher with Integrated FET 3V to 6V Input, 6A Output Synchronous-Buck PWM Switcher with Integrated FETs BiCMOS Low-Power Current Mode PWM Controller Economy Primary Side Controller Low Power Economy BiCMOS Current Mode PWM Dual 4A Peak, High-Speed Low-Side Power MOSFET Drivers Dual 4A, High-Speed Low-Side MOSFET Drivers with Enable +9V to +80V Positive High-Voltage Power-Limiting Hot Swap Controller Full Featured 48V Hot Swap Power Manager Simple 48V Hot Swap Controller IEEE 802.3af PoE Powered Device Controllers IEEE 802.3af PD Controller with Integrated DC/DC Quad Ethernet Power Sourcing Equipment Power Manager
DC/DC Controllers
DC/DC Converters
PWM Controllers
MOSFET Drivers
UCC27323 UCC27423 TPS2490/1 TPS2393 TPS2391 TPS2375 TPS23750 TPS2384
Hot Swap Controllers
Power-over-Ethernet (PoE)

How to Power Your Industrial Application
TI offers extensive online information on powering industrial designs. (1) Controllers for Typical Industrial Power Supplies The TPS40054/55/57 and TPS40060/61 are families of synchronous buck controllers with input voltage ranges of 8V to 40V and 10V to 55V, respectively. Learn more about these products at: www.ti.com/sc/device/tps40054 (2) Controllers for Economic Power Supply Design The TPS40200 offer an industrial input voltage range from 4.5V to 52V. Their flexible PWM control architecture allows cost-optimized power supplies for a variety of industrial control solutions. More details at: www.ti.com/sc/device/tps40200 (3) Select an Appropriate Device Using TIs PQS Tool Visit power.ti.com, click on the Power Quick Search tool and enter the desired input and output voltage(s). This tool provides recommendations from our many product portfolios, including DC/DC controllers, DC/DC converters, low-dropout linear regulators, PWM controllers and complete module solutions. (6) Power Management Selection Guide This guide provides an overview of TIs extensive power supply product portfolio. You can download the guide at: http://power.ti.com/selectionguide (5) Not Sure Which Architecture Will Fit? The Power Supply Topology poster, available at: http://focus.ti.com/lit/ml/sluw001a/sluw001a.pdf, provides typical power supply devices for each topology. The Power Management Applications Solutions brochure, available at: http://focus.ti.com/lit/ml/slub007/slub007.pdf, lists relevant application notes.
47
(7) Powering Xilinx and Altera FPGAs TI offers a variety of ready-to-use solutions to power core and I/O voltages for Altera and Xilinx FPGAs. Web pages for Altera (www.ti.com/alterafpga) and Xilinx (www.ti.com/xilinxfpga) feature Power Management Reference Guides, along with downloadable schematics and bills of material for each design.
(4) Reference Design Resources Our reference design home page features solutions including schematics and detailed bills of materials. Go to power.ti.com, select Design Resources and then Reference Designs.
48
Selection Tables
Amplifiers
Offset Drift CMRR (V/C) (dB) (max) (min) 1.5 (typ) 5 5 3 103 5 20 20 23 23 20 1003 1003 13 1 13 1 1 1 86 76 80 86 76 86 80 86 74 74 86 70 70 100 100 100 100 100 100
Difference Amplifiers Selection Guide

Spec Temp Range EI2 I2 I2 I2 I2 I2 I2 I2 I2 I2 I2 I2 I2 EI2 EI2 EI2 EI2 EI2 I2 Offset (V) (max) 500 250 450 250 1000 750 750 500 1000 1000 1000 5000 5000 1000 1000 1000 1000 2000 1000 BW (MHz) (typ) 1.5 0.3 1.5 0.15 0.5 0.7 3.1 4 3.1 4 0.2 0.55 0.1 0.8 4.4 0.8 4.4 0.4 0.4 Output Voltage Swing (V) (min) (V+) 0.1 to (V) +0.048 (V+) 1 to (V) + 0.5 (V+) 1.5 to (V) + 1 (V+) 1 to (V) + 0.5 (V+) 1 to (V) + 0.5 (V+) 0.2 to (V) + 0.2 (V+) 2 to (V) + 2 (V+) 2 to (V) + 2 (V+) 2 to (V) + 2 (V+) 2 to (V) + 2 (V+) 5 to (V) + 5 (V+) 1 to (V) + 0.1 5 (V+) 1 to (V) + 0.2 5 0 to (V+) 0.8 0 to (V+) 0.9 0 to (V+) 0.8 0 to (V+) 0.9 0.4 (V+) 0.1 0 to (V+) 0.9 Power Supply (V) 1.8 to 5.5 +2.7 to +36 2.25 to 18 2.25 to 18 1.35 to 18 +2.7 to +20 4 to 18 4 to 18 4 to 18 4 to 18 5 to 18 1.35 to 18 1.35 to 18 +2.7 to 36 +2.7 to 40 +2.7 to 60 +2.7 to 60 +2.7 to 13.5 +2.7 to 60 IQ (mA) (max) 1.4 0.185 1.2 1.2 0.7 0.65 2.9 2.9 2.9 0.7 0.3 0.045 0.125 0.045 0.125 0.9 0.125
Device INA159 INA132 INA133 INA143 INA145 INA152 INA154 INA157
Description High-Speed, Single Supply Micropower, High-Precision High-Precision, Fast High-Precision, G = 10 or 0.01 Resistor Programmable Gain Micropower, High-Precision High-Speed, Precision, G = 1 High-Speed, G = 2 or 0.5 Low Distortion: 0.0005% Low Distortion, G = 0.5 or 2 200V CM Range 100V CM Range, Prog. Gain 200V CM Range, 1M Input 36V (max) High-Speed, 40V (max) 60V (max) High-Speed, 60V (max) 16V to 36V CM Range High-Side, Bi-Directional
Ch. 1 1, 2 1, 2 1, 2 1, 2 1 1 1 1, 2 1, 2 1 1 1 1 1 1 1 1 1
Gain 0.2 1 1 10, 0.1 1-1000 1 1 2, 0.5 1 2, 0.5 1 0.1-100 1 200A/V 1-100 200A/V 1-100 100V/V 1-100
Package(s) MSOP-8 DIP, SO SOIC-8/-14 SOIC-8/-14 SOIC-8 MSOP-8 SOIC-8 SOIC-8 SOIC-8/-14 SOIC-8/-14 SOIC-8 SOIC-8 SOIC-8 SOT23-5 SOT23-5 SOT23-5 SOT23-5 SOT23-5 MSOP-8
Price1 $1.60 $1.05 $1.05 $1.05 $1.50 $1.20 $1.05 $1.05 $1.05 $1.05 $2.70 $1.70 $2.10 $0.99 $0.99 $1.25 $1.25 $0.80 $1.25
General Purpose
Audio
INA134 INA137 INA117 INA146 INA148 INA138 INA139 INA168 INA169 INA19x INA170
High Common-Mode Voltage
High-Side Current Shunt Monitors
1Suggested resale price in U.S. dollars in quantities of 1,000. 2I = 40C to +85C. EI
= 40C to +125C. 3Denotes single supply.
New products are listed in bold red.
Logarithmic Amplifiers Selection Guide

Input Current Scale Range Factor (nA) (V/decade) (min) 1 0.1 1 1 0.5 0.1 0.5 0.1 0.5 0.1 0.375 0.1 Input Current Range (mA) (max) 3.5 1 3.5 3.5 3.5 3.5 Conformity Error (Initial 5 Decades) (%) (max) 0.2 0.3 0.2 0.2 0.2 0.2 Conformity Error (Initial 5 Decades) (%/C) (typ/temp) 0.0001 0.0002 0.0001 0.00001 0.00001 0.001 Offset Voltage (Input Amplifiers) (mV) (max) 1.5 1.5 1.5 1.5 1.5 4 IQ Per Ch. (mA) (max) 1.5 2 1.5 1.75 1.75 15
Device LOG101 LOG102 LOG104 LOG112 LOG21123 LOG114

1Suggested
Spec2 Temp Range C3 C C3 C3 C3 C3
VS (V) (min) 4.5 4.5 4.5 4.5 4.5 2.25
VS (V) (max) 18 18 18 18 18 5
Reference Type External External External 2.5V Internal 2.5V Internal 2.5V Internal
Auxiliary Op Amps 2 1 1 2
Package(s) SO-8 SO-14 SO-8 SO-14 SO-16 QFN-16
Price1 $6.95 $7.25 $6.95 $7.90 $11.35 $8.90
resale price in U.S. dollars in quantities of 1,000. 2C = 0C to 70C; C3 = 5C to 75C. 3Dual LOG112.
Isolation Amplifiers Selection Guide

Spec2 Temp Range WI I2 I2 I2 I Isolation Voltage Cont Peak (DC) (V) 2121 4950 2121 2121 1500 Isolation Voltage Pulse/ Test Peak (V) 2500 5600 2400 2400 2400 Isolation Mode Rejection DC (dB) (typ) 160 160 140 Input Gain Offset Voltage Nonlinearity Drift (V/C) (%) (max) (max) 0.01 150 0.01 0.02 200 0.01 SmallSignal Bandwidth (kHz) (typ) 60 60 50 50
Device ISO120 ISO121 ISO122 ISO124 ISO150

1Suggested
Description 1500-Vrms Isolation, Buffer 3500-Vrms Isolation, Buffer 1500-Vrms Isolation, Buffer 1500-Vrms Isolation, Buffer Dual, Bi-Directional Digital Coupler
Package(s) DIP-24 CERDIP-16 DIP-16, SOIC-28 DIP-16, SOIC-28 DIP-12, SO-12
Price1 $68.20 $66.35 $9.40 $7.20 $7.47
Digital Couplers
resale price in U.S. dollars in quantities of 1,000. 2WI = 55C to +125C; I2 = 25C to +85C; I = 40C to +85C.
Selection Tables
Amplifiers
Single-Supply Instrumentation Amplifiers Selection Guide
Spec2 Temp Range WI WI WI WI I WI WI I I I WI WI I WI WI WI WI WI WI WI WI WI WI I I I EI EI I I I I I Non Linearity (%) (max) 0.01 0.01 0.01 0.01 0.012 0.01 0.01 0.012 0.012 0.002 0.01 0.01 0.01 0.015 0.015 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.002 0.01 0.01 0.01 0.01 0.012 0.01 0.012 0.012 IB (nA) Input Bias Current (nA) (max) 0.01 0.01 0.01 0.01 25 0.01 0.01 25 25 5 0.01 0.01 25 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 5 2 2 2 2 25 25 25 25 Offset at G = 100 (V) (max) 1000 1000 10000 10000 250 10000 10000 250 250 55 500 1000 250 1000 8000 1000 1000 10000 10000 500 1000 10000 10000 55 100 100 100 100 Offset Drift (V/C) (max) 73 73 7 7 3 73 73 3 3 0.7 53 53 2 53 53 73 73 7 7 53 53 73 73 0.7 0.4 0.4 0.4 0.4 CMRR BW at at G = 100 G = 100 (dB) (kHz) (min) (min) 90 90 60 60 90 60 60 83 83 107 90 80 100 86 86 90 90 60 60 90 80 60 60 107 100 100 106 106 90 100 83 83 50 50 50 50 5 500 500 9 9 70 2000 2000 4.5 110 110 50 50 50 50 2000 2000 500 500 70 1 1 1 1 Noise at 1kHz (nV/ Hz) (typ) 100 100 100 100 60 100 100 35 35 10 46 46 38 40 40 100 100 100 100 46 46 100 100 10 33 33 33 33 Power Supply (V) 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.2 to 36 2.7 to 5.5 2.7 to 5.5 2.7 to 36 2.7 to 36 2.7 to 36 2.7 to 5.5 2.7 to 5.5 2.7 to 36 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 36 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.2 to 36 2.7 to 36 2.7 to 36 2.7 to 36 2.7 to 5.5 IQ per Amp (mA) (max) 0.06 0.06 0.06 0.06 0.085 0.1 0.1 0.2 0.2 0.385 0.5 0.5 0.525 2.1 2.1 0.06 0.06 0.06 0.06 0.5 0.5 0.1 0.1 0.385 3.4 3.4 3.4 3.4 0.085 0.525 0.2 0.2 3.6
49
Device Description INA321 INA2321 INA322 INA2322 INA122 INA332 INA2332 INA126 INA2126 INA118 INA331 INA2331 INA125 RRO, SHDN, Low Offset, Gain Error Dual INA321 RRO, SHDN, Low Cost Dual INA322 power, RRO, CM to Ground RRO, Wide BW, SHDN Dual INA332 power, < 1V VSAT, Low Cost Dual INA126 Precision, Low Drift, Low Power4 RRO, Wide BW, SHDN Dual INA331 Internal Ref, Sleep Mode4
Gain 5 to 10000 5 to 10000 5 to 10000 5 to 10000 5 to 10000 5 to 1000 5 to 1000 5 to 10000 5 to 10000 1 to 10000 5 to 1000 5 to 1000 4 to 10000 10, 50 10, 50 5 to 10000 5 to 10000 5 to 10000 5 to 10000 5 to 1000 5 to 1000 5 to 1000 5 to 1000 1 to 10000 0.1 to 10000 0.1 to 10000 0.1 to 10000 0.1 to 10000 5 to 10000 4 to 10000 5 to 10000 5 to 10000
Package(s) MSOP-8 TSSOP-14 MSOP-8 TSSOP-14 SOIC-8 MSOP-8 MSOP-8 SO/MSOP-8 SO/MSOP-16 SOIC-8 MSOP-8 TSSOP-14 SOIC-16 MSOP-8 SOIC-8, MSOP-8 MSOP-8 TSSOP-14 MSOP-8 TSSOP-14 MSOP-8 TSSOP-14 MSOP-8 TSSOP-14 SOIC-8 MSOP-8 MSOP-10 MSOP-8 MSOP-10 SOIC-8 SOIC-16 SO/MSOP-8 SO/MSOP-16 MSOP-10
Price1 $1.10 $1.75 $0.95 $1.50 $2.10 $0.85 $1.35 $1.05 $1.70 $4.15 $1.10 $1.80 $2.05 $1.10 $0.95 $1.10 $1.75 $0.95 $1.50 $1.10 $1.80 $0.88 $1.35 $4.15 $1.80 $1.95 $1.80 $1.95 $2.10 $2.05 $1.05 $1.70 $1.55
Single-Supply, Low Power IQ < 525A per Instrumentation Amp
Single-Supply, Low Input Bias Current IB < 100pA

INA155 Low Offset, RRO, SR = 6.5V/s INA156 Low Offset, RRO, Low Cost, SR = 6.5V/s INA321 RRO, SHDN, Low Offset, Gain Error INA2321 Dual INA321 INA322 RRO, SHDN, Low Cost INA2322 Dual INA322 INA331 RRO, Wide BW, SHDN INA2331 Dual INA331 INA332 RRO, Wide BW, SHDN INA2332 Dual INA332 INA118 Precision, Low Drift, Low Power4 INA326 RRIO, Auto Zero, CM > Supply, Low Drift INA327 RRIO, Auto Zero, SHDN, CM > Supply, Low Drift INA337 RRIO, Auto Zero, Low Drift, CM > Supply INA338 RRIO, Auto Zero, Low Drift, CM > Supply, SHDN INA122 power, RRO, CM to Ground INA125 Internal Ref, Sleep Mode4 INA126 power, < 1V VSAT, Low Cost INA2126 Dual INA126 INA330 Optimized for Precision 10K Thermistor Applications
1Suggested
Single-Supply, Precision VOS < 300A, Low VOS Drift
Signal Amplifiers for Temperature Control
250 3 250 2 250 3 250 3 Temp Error5 3 0.2 0.009C3
5 60 4.5 38 9 35 9 35 1/F Noise 1 0.0001 C pp
resale price in U.S. dollars in quantities of 1,000. 2WI = 55C to +125C; I = 40C to +85C; EI = 40C to +125C. 3Typical. 4Internal +40-V input protection. 540C to +85C.
50
Selection Tables
Amplifiers
Input Offset Non Bias at Offset Linearity Current G = 100 Drift (%) (nA) (V) (V/C) (max) (max) (max) (max) 0.012 0.012 0.002 0.005 0.01 0.002 0.002 0.002 25 25 5 0.05 25 5 5 5 250 250 55 500 250 60 60 50 3 3 0.7 5 2 0.7 0.7 0.7 CMRR BW Noise at at at G = 100 G = 100 1kHz (dB) (kHz) (nV/ Hz) (min) (min) (typ) 90 83 107 100 100 120 120 110 5 9 70 50 4.5 200 200 200 60 35 10 20 38 8 8 8 IQ per Amp (mA) (max)
Dual-Supply Instrumentation Amplifiers Selection Guide

Spec2 Temp Range I I I I I I I I Power Supply (V) 1.3 to 18 1.35 to 18 1.35 to 184 2.25 to 184 1.35 to 18 2.25 to 18 2.25 to +18 2.25 to +18
Device INA122 INA1263 INA118 INA121 INA125 INA1283 INA129 INA1413
Description power, RRO, CM to Ground power, < 1V VSAT, Low Cost Precision, Low Drift Low Bias, Precision Internal Ref, Sleep Mode4 Precision, Low Noise, Low Drift4 Precision, Low Noise, Low Drift AD620 Second Source4 Precision, Low Noise, Low Drift, Pin Compatible with AD62124 Fast Settle, Low Noise, Wide BW Precision Fast Settle, Low Noise, Wide BW Ultra Low IB 3 fA (typ), with Buffered Guard Drive Pins4 Precision, Low Drift4 Precision, Low Drift, with Gain Sense Pins4 Low Noise, Low Drift4 Precision, Low Noise, Pin Com. w/AD6212 Precision, Low Drift Precision, Low Noise, Low Drift4 Precision, Low Noise, Low Drift, AD620 Second Source4 power, RRO, CM to Ground Internal Ref, Sleep Mode4 power, < 1V VSAT, Low Cost Low Noise, Wide BW, Gain Sense Pins Fast Settle, Low Noise, Low Bias, Wide BW
Gain 5 to 10000 5 to 10000 1 to 10000 1 to 10000 4 to 10000 1 to 10000 1 to 10000 10, 100
Package(s)
Price1
Dual-Supply, Low Power IQ < 850A per Instrumentation Amp

0.085 DIP-8, SOIC-8 $2.10 0.2 DIP/SO/MSOP-8 $1.05 0.385 SOIC-8 $4.15 0.525 SO-8 $2.50 0.525 SOIC-16 $2.05 0.8 SOIC-8 $3.05 0.8 SOIC-8 $3.05 0.8 SOIC-8 $3.05
Dual-Supply, Low Input Bias Current IB < 100pA

INA110 INA121 INA111 INA116 C I I I 1,10,100, 200, 500 1 to 10000 1 to 10000 1 to 10000 0.01 0.005 0.005 0.01 0.05 0.05 0.02 0.0001 280 500 520 5000 2.5 5 6 40 106 100 106 80 470 50 450 70 10 20 10 28 6 to 18 2.25 to 184 6 to 18 4.5 to 18 4.5 0.525 4.5 1.4 CDIP-16 SO-8 SO-16 SO-16 $7.00 $2.50 $4.20 $4.20
Dual-Supply, Precision VOS < 300A, Low VOS Drift

INA114 INA115 INA131 INA1413 INA118 INA1283 INA129 INA122 INA125 INA1263 INA101 INA110 I I I I I I I I I I C C 1 to 10000 1 to 10000 100 10, 100 1 to 10000 1 to 10000 1 to 10000 5 to 10000 4 to 10000 5 to 10000 1 to 10000 1,10,100, 200, 500 1, 100 1 to 10000 2000 1 to 10000 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.012 0.01 0.012 0.007 0.01 2 2 2 5 5 5 5 25 25 25 30 0.05 50 50 50 50 55 60 60 250 250 250 259 280 0.25 0.25 0.25 0.7 0.7 0.7 0.7 3 2 3 23 2.5 110 120 110 110 107 120 120 90 100 83 100 106 10 10 70 200 70 200 200 5 4.5 9 25000 470 11 11 12 8 10 8 8 60 38 35 13 10 2.25 to 18 2.25 to 18 2.25 to 18 2.25 to 184 1.35 to 184 2.25 to 18 2.25 to 18 1.3 to 18 1.35 to 18 1.35 to 18 5 to 18 6 to 18 3 3 3 0.8 0.385 0.8 0.8 SO-16 SO-16 PDIP-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 $4.20 $4.20 $3.80 $3.55 $4.15 $3.05 $3.05 $2.10 $2.05 $1.05 $7.90 $7.00
0.085 SOIC-8 0.525 SOIC-16 0.2 SO/MSOP-8 8.5 T0-100, CDIP-14, PDIP-14, SO-16 4.5 CDIP-16
Dual-Supply, Lowest Noise

INA103 INA163 INA166 INA217 Precision, Fast Settle, Low Drift, Audio, Mic Pre Amp, THD+N = 0.0009% Precision, Fast Settle, Low Drift, Audio, Mic Pre Amp, THD+N = 0.002% Precision, Fast Settle, Low Drift, Audio, Mic Pre Amp, THD+N = 0.09% Precision, Low Drift, Audio, Mic Pre Amp, THD+N = 0.09%, SSM2017 Replacement C I I I 0.00065 0.00065 0.005 0.00065 12000 12000 12000 12000 255 300 300 300 1.25 1.25 2.55 1.25 100 100 100 100 800 800 450 800 1 1 1.3 1.3 9 to 25 4.5 to 18 4.5 to 18 4.5 to 18 13 12 12 12 SO-16 SOIC-14 SO-14 Narrow SO-16 $5.00 $2.50 $5.95 $2.50
1Suggested
resale price in U.S. dollars in quantities of 1,000. 2I = 40C to +85C; C = 0C to 70C. 3Parts also available in dual version. 4Internal +40-V input protection. 5Typical.
Selection Tables
Amplifiers
Operational Amplifiers Selection Guide
Device OPA228 OPA227 OPA277 OPA234 Description Package Options SOIC SOIC QFN MSOP SOT23 SOIC SOIC SOIC SOIC SOIC SOIC SOT23 SOT23 MSOP SOT23 QFN MSOP SOT23 SOT23 SOT23 SOT23 TSSOP SOIC SC-70 SOT23 SOT23 WCSP, SC-70 TSSOP SOT23 SC-70 SC-70 SOT23 MSOP QFN SOIC SOT23 SOT23 SC-70 S, D, T, Q2 S, D, Q S, D, Q S, D, Q S, D, Q S, D, Q S, D, Q S S, D, Q S, D, Q S, D, Q S, D, Q S, D, T S, D, Q S, D, Q S,D S S, D, Q S, D, Q S, D, Q S, D, Q S, D, Q D, Q S, D S, D, Q S, D, Q S, D, Q S, D, Q D, Q S, D, Q S, D, Q S, D, Q S, D, Q S,D S S, D S, D S,D S, D Offset (mV) (max) 0.075 0.075 0.02 0.1 1.5 0.25 0.5 2 0.5 3 1 9 0.5 0.5 3 0.15 1.9 3 1.5 0.5 0.5 0.95 0.2 5 0.75 3.5 6 1.5 0.125 1.5 10 1.2 0.025 0.025 0.08 0.005 0.005 0.01 Drift (V/C) (typ) 0.1 0.1 0.1 0.5 0.3 0.4 2.5 2 2 2.5 2 7 4 4 4 0.3 1.2 8 8 2 2.5 2 0.5 2 4 9 2 0.5 1.5 2 15 3 0.1 0.1 1 0.02 0.05 0.05 IB (pA) (max) 10nA 10nA 1nA 25nA 5nA 20nA 10 100 50 100 20 50 10 10 200 100 50 15 10 10 10 60 10 10 10 15 10 60 10 25 10 300 50 50 500 200 200 50 Noise 1kHz (nV/ Hz) 3 3 8 25 51 45 5.6 8 8 45 16 5.8 5 8 15 6 8.5 18 30 17 25 9 8 35 45 95 60 19 40 80 300 500 5.8 10 12 1.4Vp-p 150 1Vp-p GBW (MHz) (typ) 33 8 1 0.35 0.22 0.035 16 8 8 1 1 200 50 38 20 20 10 8 7 7 5.5 2.18 1.8 1 1 0.5 0.35 0.2 0.1 0.09 0.07 0.005 90 18 4.7 2 1.6 0.35 SR (V/s) (typ) 10 2.3 0.8 0.2 VIN Low (min) (V) +2 (V) +2 (V) +2 (V) 0.1 VIN High (max) (V+) 2 (V+) 2 (V+) 2 (V+) 1 VOUT Low VOUT High VSUP
51
IQ / Amp (mA) (max) Price1 $1.10 $1.65 $0.85 $1.30 $0.60 $1.15 $12.25 $0.95 $1.45 $0.60 $1.40 $1.90 $1.30 $0.90 $1.45 $0.50 $0.65 $0.95 $0.60 $0.80 $0.65 $1.75 $0.45 $1.30 $0.65 $0.48 $0.65 $0.40 $0.75 $0.80 $1.95 $1.45 $1.35 $1.00 $1.25
Bipolar InputLow Offset, Low Drift

Very Low Noise, G>5 Very Low Noise Bipolar Lowest Offset/Drift Single Supply, General Purpose TLV2451 Good Speed/Power OPA241 Low Power, Single Supply OPA627 OPA134 OPA132 OPA137 OPA130 DiFET, Lowest THD+N 0.00008% THD+N, Audio 0.00008% THD+N, Precision Lost Cost FET, SOT23 Low Power, FET (V) +2 (V+) 2 2.5 to 18 3.8 (V) +2 (V+) 2 2.5 to 18 3.8 (V) +0.5 (V+) 1.2 2 to 18 0.825 (V) +0.1 (V+) 1 2.7 to 36 0.3 0.035 0.03 7.5 5 4.8 0.27 0.65 11 5 7.5 6.2 4.3 2.5 0.82 1.5 0.75 0.95 1.5 1.5 0.065 0.2 0.028 0.034 0.07 0.032 0.005 0.002 0.95A 9.5 1 1.5 0.3 0.75 0.02
0.12 (V) (V+) (V) +0.03 (V+) 0.07 2.7 to 6.0 0.01 (V) 0.2 (V+) 1 (V) +0.1 (V+) 0.1 2.7 to 36 55 20 20 3.5 2 300 25 22 30 30 16 4.3 10 5 6 3.6 2.5 0.5 0.6 0.2 0.17 0.12 (V) +4 (V) +2.5 (V) +2.5 (V) +3 (V) +2 (V+) 4 (V+) 2.5 (V+) 2.5 (V+) (V+) 2 (V) +3.5 (V) +0.5 (V) +0.5 (V) +0.5 (V) +1.2 (V+) 3.5 (V+) 0.5 (V+) 0.5 (V+) 1.2 (V+) 1.5 4.5 to 18 2.5 to 18 2.5 to 18 2.5 to 18 2.5 to 18
FET-InputLow Noise, Wide Bandwidth
CMOSLow Input Bias Current (IB), Rail-to-Rail In and Out

OPA355 High-Speed, RRO OPA365 Outstanding ADC Driver Low THD+N OPA350 Excellent ADC Driver Amp, Low Offset OPA725/6 Low-Noise, High-Speed OPA727 e-trimTM, Low Offset,Drift TLC081 Low Cost, Shutdown TLV2781 1.8V, 8MHz, Shutdown OPA743 12V, RRIO, SOT23 OPA364 1.8V, High CMRR, Low Offset OPA340 Low Offset, Excellent Swing TLC2272 Dual or Quad, RRIO TLC220x SS, Low Noise OPA348 Lowest Power 1MHz Amp OPA703/4 RRIO, SOT23/G>5 TLV2761 1.8V power OPA347 High Speed/Power, Dual in WCSP TLC2252 Dual or Quad, RRO, Low Power OPA336 power, Low Offset OPA379 power, Low Noise OPA349 Excellent Speed, Power, 1.8V TLV2401 Ultra-Low Power OPA380 OPA381 TLC450x OPA335 OPA734/5 OPA333
1Suggested 2S
(V) 0.2 (V+) 1 (V) 0.1 (V+) 1.5 2.5 to 5.5 (V) 0.2 (V+) +0.2 (V) +0.01 (V+) 0.01 2.2 to 5.5 (V) 0.1 (V+) +0.1 (V) +0.05 (V+) 0.05 2.5 to 5.5 (V) (V) (V) (V) 0.2 (V) 0.1 (V) 0.1 (V+) 2.5 (V+) 2.5 (V+) 1.5 (V+) +0.2 (V+) +0.1 (V+) +0.1 (V) +0.1 (V+) 0.1 (V) +0.1 (V+) 0.1 (V) +0.25 (V+) 0.9 (V) +0.07 (V+) 0.02 (V) +0.075 (V+) 0.075 (V) +0.02 (V+) 0.02 4 to 12 4 to 12 4.5 to 16 1.8 to 3.6 3.5 to 12 1.8 to 5.5
(V) 0.3 (V+) +0.3 (V) +0.005 (V+) 0.005 2.5 to 5.5 (V) (V) (V) 0.2 (V) 0.3 (V) 0.2 (V) 0.2 (V) (V+) 1.5 (V+) 2.3 (V+) +0.2 (V+) +12.3 (V+) +0.2 (V+) +0.2 (V) +0.15 (V+) 0.01 4.4 to 16 (V) +0.05 (V+) 0.3 4.6 to 16 (V) +0.018 (V+) 0.018 2.5 to 5.5 (V) +0.045 (V+) 0.05 4 to 12 (V) +0.01 (V+) 0.01 1.8 to 3.6 (V) +0.005 (V+) 0.005 2.3 to 5.5 4.4 to 16
(V+) 1 (V) +0.15 (V+) 0.1
0.03 (V) 0.2 (V+) 1 (V) +0.1 (V+) 0.1 2.3 to 5.5 0.015 (V) 0.2 (V+) +0.2 (V) +0.01 (V+) 0.01 1.8 to 5.5 0.02 (V) 0.2 (V+) +0.2 (V) +0.3 (V+) 0.3 1.8 to 5.5 0.002 (V) 0.1 (V+) +0.2 (V) +0.15 (V+) 0.05 80 (V) (V+) 1.8 12 (V) (V+) 1.8 2.5 (V) (V+) 2.3 1.6 (V) 0.1 (V+) 1.5 1.5 (V) 0.1 (V+) 1.5 0.05 (V) 0.1 (V+) +0.1 (V) (V+) 0.4 (V) (V+) 0.4 (V) +0.1 (V+) 0.1 (V) +0.015 (V+) 0.015 (V) +0.02 (V+) 0.02 (V) +0.01 (V+) 0.01 2.5 to 16 2.7 to 5.5 2.7 to 5.5 4.0 to 6.0 2.7 to 5.5 2.7 to 12 1.8 to 5.5
Auto-Zero AutocalibrationHighest Precision, Lowest Drift

High Speed Trans. Amp Low Power Precision TIA SS, Auto Cal 5V Auto-Zero 12V Auto-Zero power Auto-Zero
resale price in U.S. dollars in quantities of 1,000. = single; D = dual; T = triple; Q = quad.
New products are listed in bold red. Preview products are listed in bold blue.
52
Selection Tables
Amplifiers
Output tRESP IQ Per Ch. Current Low-to(mA), (max) (mA) (min) High (s) 5 12 12.5 14.7 20 0.0008 0.0012 0.0017 0.0019 0.003 0.005 16 16 5 0.5 0.0045 0.006 0.0078 0.0099 0.025 36 <0.1 55 36 6 6 VS (V) (min) 2.7 4.75 5 5 4.75 2.5 1.8 2.5 2.5 1.8 1.8 VS (V) VOS (25C) (max) (mV) (max) 5.5 5.25 10 10 5.25 16 5.5 16 16 5.5 5.5 6.5 10 3 3 5 5 15 5 5 15 12
Comparators Selection Guide

Device TLV3501 TL714 TL3016 TL3116 TL712 Description Ch. Output type Push-Pull Push-Pull Open-Drain/Collector Open-Drain/Collector Push-Pull Push-Pull Push-Pull Open Drain/Collector Push-Pull Open Drain/Collector Push-Pull Package(s) SOT23, SOIC PDIP, SOIC SOIC, TSSOP SOIC, TSSOP PDIP, SOIC, SOP MSOP, PDIP, SOIC, SOT23, TSSOP SOT23, SOIC, TSSOP MSOP, PDIP, SOIC, TSSOP MSOP, PDIP, SOIC, TSSOP SC70, SOT23 SC70, SOT23 Price1 $1.50 $2.16 $0.95 $0.95 $0.83 $0.60 $0.42 $0.90 $0.90 $0.75 $0.75
High Speed
Ultra High-Speed, Rail-Rail 1, 2 High-Speed, 10mV (typ) Hysteresis 1 High-Speed, Low Offset 1 Ultra Fast, Low Power, Precision 1 Single, High-Speed 1 1, 2, 4 1, 2 2 2, 4 1 1
Low Power IQ <0.5mA

TLV370x Nanopower, Push-Pull, RRIO TLV349x Low Voltage, Speed/Power TLV230x Sub-power, RRIO TLV270x Sub-power, RRIO TLV3011 power Open-Drain with Built-in 1.242V Ref TLV3012 power Push-Pull with Built-in 1.242V Ref
1Suggested
Combination Comparators and Op Amps
Comparator with On-Chip Voltage Reference
High-Speed Amplifiers Selection Guide

Supply Voltage (V) 5, 5, 15 5, 5, 15 5, 5 5, 5 ACL (min) 1 1 1 1 BW at ACL (MHz) (typ) 150 150 370 260 BW GBW G = +2 Product (MHz) (MHz) (typ) (typ) 90 81 175 110 90 100 300 210 Slew Rate (V/s) 52 650 2800 1800 Settling THD Time 2Vpp 0.1% G = 1.1MHz (ns) (typ) (dB) (typ) 78 53 6.3 20 97 84 100 100 Differential VN VOS Gain Phase (nV/ Hz) (mV) (%) () (typ) (max) 1.3 7.6 6 8 2 7 7 7
Device THS4130/31 THS4150/51 THS4502/03 THS4504/05
Ch. 1 1 1 1
SHDN Y Y Y Y
Package(s) SOIC, MSOP PowerPADTM SOIC, MSOP PowerPAD, Leadless MSOP PowerPAD SOIC, MSOP PowerPAD, Leadless MSOP PowerPAD SOIC, MSOP PowerPAD, Leadless MSOP PowerPAD SOT23, SOIC PowerPAD SOIC PowerPAD, MSOP SOIC, TSSOP SOT23, SOIC MSOP SOIC SOT23, SOIC SOIC, MSOP SOT23, SOIC PowerPAD MSOP SC-70 SOT23, SOIC SOT23, SOIC SOIC, MSOP PowerPAD
Price1 $3.50 $4.70 $4.00 $1.75
Fully Differential
CMOS Amplifiers
OPA354 OPA2354 OPA4354 OPA355 OPA2355 OPA3355 OPA356 OPA2356 OPA357 OPA2357 OPA358 1 2 4 1 2 3 1 2 1 2 1 1 1 1 Y Y Y Y Y Y N 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 2.5 to 5.5 2.7 to 3.3 5 5 5, 5, 15 1 1 1 1 1 1 1 1 1 1 1 1 7 1 250 250 250 450 450 450 450 450 250 250 75 500 350 150 90 90 90 100 100 100 100 100 90 90 200 300 90 100 100 100 200 200 200 200 200 100 100 80 230 1600 90 150 150 150 300 300 300 300 300 150 150 55 290 700 52 30 30 30 30 30 30 30 30 30 30 10 78 80 80 97 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.3 0.02 0.09 0.09 0.09 0.05 0.05 0.05 0.05 0.05 0.09 0.09 0.7 0.05 6.5 6.5 6.5 5.8 5.8 5.8 5.8 5.8 6.5 6.5 5.8 7 4.8 2 8 8 8 9 9 9 9 9 8 8 6 1.8 1.8 $0.75 $1.20 $1.80 $0.90 $1.50 $1.90 $0.90 $1.50 $0.75 $1.20 $0.45 $3.35 $3.80 $3.50
FET-Input
OPA656 OPA657 THS4131
1Suggested
Selection Tables
Amplifiers
High-Speed Amplifiers Selection Guide (Continued)
Supply Voltage (V) 5, 5 5 5 5 5 5, 5 5, 15 5, 15 5, 15 5, 15 5, 5, 15 5, 5 5, 5 5, 5 5, 5 5, 5 5, 5 5 5, 15 5, 15 5, 15 ACL (min) 1 1 3 7 12 1 2 1 1 1 1 1 4 1 1 1 1 1 1 1 1 BW at ACL (MHz) (typ) 800 400 500 500 600 230 100 290 70 175 1400 450 260 280 1700 210 200 1500 235 100 130 BW GBW G = +2 Product (MHz) (MHz) (typ) (typ) 240 56 65 110 100 50 38 390 215 255 1400 160 150 690 210 90 280 200 800 1750 3900 125 200 100 100 400 250 1000 Slew Rate (V/s) 240 400 1000 625 950 70 100 310 240 230 1000 1100 1400 2100 4300 820 540 1700 5000 1300 1500 Settling THD Time 2Vpp 0.1% G = 1.1MHz (ns) (typ) (dB) (typ) 18 15 7.5 15 20 40 60 37 60 43 25 8 13 42 27 11 84 94 72 80 82 64 110 93 93 86 77 84 72 78 53 Differential VN VOS Gain Phase (nV/ Hz) (mV) (%) () (typ) (max) 0.01 0.003 0.001 0.02 0.015 0.006 0.01 0.01 0.007 0.012 0.012 0.07 0.04 0.04 0.06 0.03 0.013 0.01 0.007 0.03 0.008 0.012 0.02 0.025 0.01 0.01 0.05 0.004 0.008 0.008 0.02 0.007 0.02 0.03 0.015 0.02 0.03 0.018 0.75 2.7 2 1.2 0.85 1 1.6 6 10 7 3 5.6 4.1 1.7 3 3.7 4.4 4.1 2 6 2 1 1.2 1.2 0.5 0.5 1 2 6 10 4.5 10 5 5 2.5 3 0.35 3.5 3 3 8 8
53
Device OPA820 OPA842 OPA843 OPA846 OPA847 OPA2613 THS4031/32 THS4011/12 THS4051/52 THS4081/82 THS4271 OPA698 OPA699
Ch. 1, 2, 4 1 1 1, 2 1 2 1, 2 1, 2 1, 2 1, 2 1 1 1
SHDN N N N N N Y N N Y Y Y Y N Y Y N
Package(s) SOP,SOIC SOT23, SO SOT23, SO SOT23, SOIC SOT23, SOIC SOIC SOIC, MSOP PowerPADTM SOIC, MSOP PowerPAD SOIC, MSOP PowerPAD SOIC, MSOP PowerPAD SOIC, MSOP PowerPAD SOIC SOIC SOT23, SOIC SOT23, SOIC SOT23, SOIC SOT23, SOIC SOT23, SOIC SOIC, SOIC PowerPAD SOIC, MSOP PowerPAD SOIC, MSOP PowerPAD
Price1 $0.90 $1.55 $1.60 $1.70 $2.00 $1.55 $2.00 $2.30 $1.10 $1.80 $2.85 $2.00 $2.05 $1.55 $1.35 $1.35 $1.20 $1.25 $3.60 $1.85 $2.25
Voltage Feedback
Voltage-Limiting Amplifiers
Current Feedback
OPA691 1, 2, 3 OPA695 1 OPA684 1, 2, 3, 4 OPA683 1, 2 OPA694 1 THS3091/95 1, 2 THS3110/12 1, 2 THS3120/22 1, 2
1Suggested
High-Speed Buffer Amplifiers Selection Guide

Spec2 Temp Range I I C VS 15 (V) N Yes Yes VS 5 (V) 5 Yes Yes VS +5 (V) Yes Yes ACL Min Stable Gain (V/V) 1 1 1 BW at ACL (MHz) 1600 180 260 Slew Rate (V/s) 9000 2000 2500 Settling Time 0.01% (ns) (typ) 200 50 IQ (mA) (typ) 5.8 250 100 THD (FC = 1MHz) (dB) (typ) 80 Diff Gain (%) 0.06 0.4 Diff Phase () 0.02 0.1 0.1 VOS (mV) max 30 100 15 IB (A) max 7 20 35
Device BUF162 BUF634 OPA633

1Suggested
Package(s) SOIC, MSOP, PowerPAD DIP, SOIC, TO220-5, DDPak-5 DIP
Price1 $1.60 $3.05 $5.45
resale price in U.S. dollars in quantities of 1,000. 2I = 40C to +85C; C = 0C to 70C.
For a complete product listing visit amplifier.ti.com
PWM Power Drivers Selection Guide

Device Temp Range2 I WI I I Output Current (A) (min) 1.9 2 3 1.2 Saturation Voltage (V) (max) 1 2.2 0.6 0.65 IQ (mA) (max) 5 9 0.8 1 VS (V) (min) 9 8 8 8 VS (V) (max) 60 60 32 32 Duty Cycle (%) (min) 10 10 10 10 Duty Cycle (%) (max) 90 90 90 90 Package(s) TO-220, DDPAK TO-220, DDPAK SO-8, SO-8 PowerPAD 14-lead PowerPAD Price1 $3.85 $3.85 $1.60 $1.60
Single Switch
DRV101 DRV102 DRV103 DRV104
1Suggested
resale price in U.S. dollars in quantities of 1,000. 2I = 40C to +85C; WI = 55C to +125C.
54
Selection Tables
Amplifiers
Spec2 Temp Range I2 EI EI I2 I I I I I EI EI EI I EI IOUT (A) 0.015 0.05 0.05 10 2 2 0.5 3 8 0.2 0.2 1.2 2 0.3 VS (V) 10 to 40 20 to 80 20 to 80 10 to 40 20 to 70 20 to 70 8 to 60 8 to 60 8 to 60 8 to 60 8 to 60 7 to 16 2.7 to 5.5 2.5 to 6 Bandwidth (MHz) 2 1.8 7.5 Full Power 55kHz 1.4 1.4 1 1 0.9 3 12 17 1.2 2.7 Slew Rate IQ (V/s) (mA) (max) 15 4.7 7.2 5.5 23 5.5 10 20 8 12 8 12 6 10 10 17 9 26 15 7 24 7 50 50 1.2 6 1.6 1 VOS (mV) (max) 5-3 3 3 1 5 5 5 10 5 3 3 20 2 3.5 VO Drift (V/C) (max) 10 5 5 30 10 10 25 30 20 7 7 50 1.3 (typ) 3 IB (nA) (max) 0.05 0.1 0.1 0.05 0.1 0.1 500 500 500 0.1 0.1 0.1 10A 0.05
Power Operational Amplifiers Selection Guide

Device OPA445/B OPA452 OPA453 OPA541 OPA544 OPA2544 OPA547 OPA548 OPA549 OPA551 OPA552 OPA561 OPA569 TLV411x
1Suggested
Package(s) TO-99, DIP-8, SO-8 TO220-7, DDPak-7 TO220-7, DDPak-7 TO-3, ZIP TO220-5, DDPak-5 ZIP11 TO220-7, DDPak-7 TO220-7, DDPak-7 ZIP11 DIP-8, SO-8, DDPak-7 DIP-8, SO-8, DDPak-7 HTSSOP-20 SO-20 PowerPADTM PDIP, MSOP, SOIC
Price1 $4.75 $2.55 $2.55 $11.10 $6.88 $12.00 $4.35 $6.00 $12.00 $2.40 $1.75 $2.65 $3.10 $0.75
resale price in U.S. dollars in quantities of 1,000. 2I2 = 25C to +85C; I = 40C to +85C; EI = 40C to +125C.
Digital Temperature Sensors Selection Guide

Device TMP100 TMP101 TMP175 TMP75 TMP121 TMP122 TMP123 TMP124 TMP125 TMP141 TMP300 TMP301
1Suggested
Supply Voltage (V) 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 1.8 to 18 1.8 to 18
Interface 2-Wire 2-Wire 2-Wire 2-Wire SPI SPI SPI SPI SPI SensorPath Analog and Comparator Outputs Comparator Output
25 to 85C Accuracy (C max)2 2 2 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2 2 2
Quiescent Current (A) max 45 45 50 50 50 50 50 50 50 170 100 50
Resolution (Bits) 9 to 12 9 to 12 12 12 12 9 to 12 12 12 10 10
Programmable Temp Alert Resistor Prog. with 5C/10C Hysteresis Resistor Prog. with 5C/10C Hysteresis
Max Operating Temp (C) 150 150 127 127 150 150 150 150 125 127 150 150
Package SOT23 SOT23 SO-8 SO-8 SOT23 SOT23 SOT23 SO-8 SOT23-6 SOT23 SC-70 SC-70
Price1 $0.75 $0.80 $0.85 $0.70 $0.90 $0.99 $0.90 $0.70 $0.80 $0.65 $0.70 $0.70
resale price in U.S. dollars in quantities of 1,000. 2All digital temp sensors have a 0.5C typical accuracy.
Preview products are listed in bold blue.
Selection Tables
Amplifiers/Voltage References
4-20mA Transmitters and Receivers Selection Guide
Sensor Excitation Two 1mA VREF = 2.5V VREF = 4.096V VREF = 5.0V VREF = 10V Loop Voltage (V) 11.6 to 40 7.5 to 36 7.5 to 36 7.5 to 36 13.5 to 40 Full-Scale Input Range 5mV to 1V 40A to 200A 40A to 200A 40A to 200A 0V to 5V, 0V to 10V 4-20mA 5mV to 1V 5mV to 1V 5mV to 1V 5mV to 1V 5mV to 320mV Output Range (mA) 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA, 0-20mA, 0-25mA 0V to 5V 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA Additional Power Available (V at mA)
55
Device XTR101 XTR115 XTR116 XTR117 XTR110
Description IA with Current Excitation IIN to IOUT Converter, External Resistor Scales VIN to IIN IIN to IOUT Converter, External Resistor Scales VIN to IIN IIN to IOUT Converter, External Resistor Scales VIN to IIN Selectable Input/Output Ranges
Package(s) DIP-14, SOIC-16 SOIC-8 SOIC-8 MSOP-8, DFN 8 DIP-16, SOIC-16
Price1 $8.70 $1.05 $1.05 $0.90 $7.10
2-Wire General Purpose
3-Wire General Purpose
4-20mA Current Loop Receiver

RCV420 XTR105 XTR112 XTR114 XTR106 XTR108 4-20mA Input, 0V to 5V Output 100 RTD Conditioner High-Resistance RTD Conditioner High-Resistance RTD Conditioner Bridge Conditioner 100 to 1k RTD Conditioner, 6-Channel Input Mux, Extra Op Amp Can Convert to Voltage Sensor Excitation, Calibration Stored in External EEPROM Complete Digitally Calibrated Bridge Sensor Conditioner, Voltage Output, Calibration Stored in External EEPROM, One-Wire/Two-Wire Interface Output Driver for Industrial and Process Control Loops User Selects V or I
VREF = 10V Two 800A Two 250A Two 100A 5V and 2.5V Two 500A
40V 7.5 to 36 7.5 to 36 7.5 to 36 7.5 to 36 7.5 to 24
5.1 at 1 5.1 at 1 5.1 at 1 5.1 at 1 5.1 at 2.1
DIP-16 DIP-14, SOIC-14 SOIC-14 SOIC-14 DIP-14, SOIC-14 SSOP-24
$3.55 $4.00 $4.00 $4.00 $4.00 $3.35
2-Wire RTD Conditioner with Linearization
2-Wire Bridge Sensor Conditioner with Linearization 2-Wire RTD Conditioner with Digital Calibration for Linearization, Span and Offset
Bridge Conditioner with Digital Calibration for Linearization, Span and Offset Over Temperature
PGA309 VEXC = VS, 2.5V, 4.096V N/A 1mV/V to 245mV/V 17V 0.1V to 4.9V at VS=+5V 17.5V, 20mA TSSOP-16 $3.40
XTR300
1Suggested
17.5V
5 x 5 QFN
Voltage References Selection Guide

Initial Accuracy (%) max 0.2 0.2 0.2 0.13 0.1 0.05 0.2 0.025 Drift (ppm/C) max 7 15 50 10 10 5 30 2.5 Long-Term Stability (ppm/1000hr) (typ) 55 24 24 50 20 20 60 20 Noise 0.1 to 10Hz (Vp-p) (typ) 17 to 53 15 to 30 20 to 45 4 5 5 25 5 IQ max (mA) 0.12 0.1 0.05 1.4 1.4 1.4 0.0012 1.4 Temperature Range (C) 40 to +125 40 to +125 40 to +125 25 to +85 25 to +85 25 to +85 40 to +125 25 to +85 Output Current (mA) 10 10 25 +21, 0.5 +10, 5 +10, 5 1A to 5mA +10, 5
Device REF32xx REF31xx REF30xx REF02B
Description Precision, power Precision, power power, Bandgap
Low Drift, Low Noise, Buried Zener REF102A Low Drift, Low Noise, Buried Zener REF102B Low Drift, Low Noise, Buried Zener REF1112 Nanopower 1.25V Shunt REF102C Ultra-Low Drift, Low Noise, Buried Zener Current References REF200 Dual Current Reference with Current Mirror
1Suggested
Output (V) 1.25, 2.048, 2.5 3.0, 3.3, 4.096 1.25, 2.048, 2.5 3.0, 3.3, 4.096 1.25, 2.048, 2.5, 3.0, 3.3, 4.096 5 10 10 1.25 10
Package(s) SOT23-6 SOT23-3 SOT23-3 PDIP-8, SOIC-8 PDIP-8, SOIC-8 PDIP-8, SOIC-8 SOT-23 PDIP-8, SOIC-8
Price1 $1.70 $1.10 $0.60 $2.65 $1.75 $4.40 $0.85 $5.10
Two 100A
1A
25 (typ)
1Ap-p
25 to +85
50A to 400A3
PDIP-8, SOIC-8
$2.60
56
Selection Tables
Data Converters
Sample Rate (kSPS) 125 105 41 30 30 20 20 20 16 0.78 0.78 0.78 0.24 0.24 0.8 0.8 0.015 0.015 0.015 0.015 0.015 0.015 6.25 25 0.128 0.24 0.24 3 0.128 0.25 0.24 10 3 3 3 Number of Input Channels 16 SE/8 Diff 1 Diff 1 SE/1 Diff 2 SE/1 Diff 8 SE/4 Diff 1 SE/1 Diff 4 SE/4 Diff 4 SE/4 Diff 1/4 SE/1/4 Diff 8 SE/4 Diff 8 SE/4 Diff 8 SE/4 Diff 2 SE/2 Diff 4 SE/4 Diff 2 SE/2 Diff 4 SE/4 Diff 1 SE/1 Diff 1 SE/1 Diff 4 SE/2 Diff 8 SE/4 Diff 4 SE/2 Diff 8 SE/4 Diff 1/4 SE/1/4 Diff 1 SE/1 Diff 1 SE/1 Diff 1 SE/1 Diff 3 SE/2 Diff 1 SE/1 Diff 1 SE/1 Diff 1 SE/1 Diff 3 SE/1 Diff 1 2 4 8
ADCs Selection Guide

Res. Device (Bits) ADS1258 24 ADS1271 24 ADS1252 24 ADS1255 24 ADS1256 24 ADS1251 24 ADS1253 24 ADS1254 24 ADS1210/11 24 ADS1216 ADS1217 ADS1218 ADS1222 ADS1224 ADS1232 ADS1234 ADS1244 ADS1245 ADS1240 ADS1241 ADS1242 ADS1243 ADS1212/13 ADS1250 ADS1100 ADS1110 ADS1112 TLC7135 ADS1000 ADS1010 ADS1012 DDC101 DDC112 DDC114 DDC118
1Suggested
Interface Serial, SPI Serial, SPI Serial Serial, SPI Serial, SPI Serial Serial Serial Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial Serial Serial Serial Serial Serial Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, I2C Serial, I2C Serial, I2C MUX BCD Serial, I2C Serial, I2C Serial, I2C Serial Serial Serial Serial
Input Voltage (V) 5 2.5 5 PGA (1-64), 5V PGA (1-64), 5V 5 5 5 PGA (1-16), 5 PGA (1-128), 2.5 PGA (1-128), 5 PGA (1-128), 2.5 5 5 PGA (1-128), 2.5 PGA (1-128), 2.5 5 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-16), 5 PGA (1-8), 4 PGA (1-8), VDD PGA (1-8), 2.048 PGA (1-8), 2.048 VREF PGA(1-8), VDD PGA(1-8), 2.048 PGA(1-8), 2.048 500pC 50-1000pC 12-350pC 12-350pC
VREF Ext Ext Ext Ext Ext Ext Ext Ext Int/Ext Int/Ext Int/Ext Int/Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Int/Ext Ext Ext Int Int Ext Ext Int Int Ext Ext Ext Ext
Linearity (%) 0.001 0.0015 0.0015 0.001 0.001 0.0015 0.0015 0.0015 0.0015 0.0015 0.0012 0.0015 0.0015 0.0015 0.0015 0.0015 0.0008 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.003 0.0125 0.01 0.01 0.005 0.0125 0.01 0.01 0.025 0.025 0.025 0.025
NMC (Bits) 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 22 20 16 16 16 4.5 Dig 12 12 12 20 20 20 20
Power (mW) 44 35-100 40 35 35 7.5 7.5 4 27.5 0.6 0.8 0.8 0.5 0.5 3 3 0.3 0.5 0.6 0.5 0.6 0.6 1.4 75 0.3 0.7 0.7 5 0.3 0.7 0.7 170 80 55 110
24 24 24 24 24 24 24 24 24 24 24 24 24 22 20 16 16 16 14 12 12 12 20 20 20 20
Package(s) QFN-48 TSSOP-16 SOIC-8 SSOP-20 SSOP-28 SOIC-8 SSOP-16 SSOP-20 PDIP-18/24, SOIC-18/24, SSOP-28 TQFP-48 TQFP-48 TQFP-48 TSSOP-14 TSSOP-20 TSSOP-24 TSSOP-28 MSOP-10 MSOP-10 SSOP-24 SSOP-28 TSSOP-16 TSSOP-20 PDIP-18/24, SOIC-18/24, SSOP-28 SOIC-16 SOT23-6 SOT23-6 MSOP-10, SON-10 PDIP-28, SOIC-28 SOT23-6 SOT23-6 MSOP-10, SON-10 SOIC-24 SOIC-28, TQFP-32 QFN-48 QFN-48
Price1 $8.95 $5.90 $5.60 $8.25 $8.95 $5.60 $6.70 $6.70 $10.25/ $10.90 $5.00 $5.00 $5.50 $2.95 $3.25 $3.90 $4.50 $2.95 $3.10 $3.80 $4.20 $3.60 $3.95 $7.70/ $9.00 $6.95 $1.80 $1.95 $2.65 $1.95 $0.99 $1.10 $1.45 $23.00 $12.10 $18.00 $32.00
Delta-Sigma () ADCs for Measuring Low-Level Currents (Photodiodes)
Wide Bandwidth Delta-Sigma () ADCs Selection Guide

Device ADS1271 ADS1625 ADS1626 ADS1610 ADS1605 ADS1606 ADS1602 ADS1601
1Suggested
(Bits) 24 18 18 16 16 16 16 16
Sample Rate (kSPS) 105 1.25MSPS 1.25MSPS 10MSPS 5MSPS 5MSPS 2.5MSPS 1.25MSPS
Bandwidth (kHz) 51 615 615 4900 2450 2450 1230 615
Number of Input Channels 1 Diff 1 Diff 1 Diff 1 Diff 1 Diff 1 Diff 1 Diff 1 Diff
Interface Serial P18 P18 w/FIFO P16 P16 P16 w/FIFO Serial Serial
Input Voltage (V) 2.5 3.75 3.75 3 3.75 3.75 3 3
SNR (dB) 109 93 93 84 88 88 91 92
THD (dB) 105 103 103 96 101 101 103 105
Power (mW) 35-100 520 520 1000 570 570 550 350
Package TSSOP-16 TQFP-64 TQFP-64 TQFP-64 TQFP-64 TQFP-64 TQFP-48 TQFP-48
Price1 $5.90 $37.60 $39.60 $32.05 $33.75 $23.00 $14.00
Selection Tables
Data Converters
SAR ADCs Selection Guide
Device ADS8380 ADS8382 ADS8381 ADS8383 ADS8411 ADS8412 ADS8401 ADS8402 ADS8405 ADS8406 ADS8371 ADS8370 ADS8372 ADS8322 ADS8323 ADS8361 ADS8509 ADS8505 ADS8342 ADS7811 ADS7815 ADS8364 TLC4541 TLC4545 ADS7805 ADS7809 ADS8320 ADS8321 ADS8325 ADS8341 ADS8343 ADS8344 ADS8345 ADS7807 ADS7813 ADS7825 ADS7891 ADS7890 TLC3541 TLC3544 TLC3545 TLC3548 TLC3574 TLC3578 ADS8324 ADS7871 ADS7881 ADS7869 ADS7886 ADS7810 ADS7818
1Suggested
57
Res. (Bits) 18 18 18 18 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 14 14 14 14 14 14 14 14 14 14 12 12 12 12 12
Sample Rate (kSPS) 600 600 580 500 2000 2000 1250 1250 1250 1250 750 600 600 500 500 500 250 250 250 250 250 250 200 200 100 100 100 100 100 100 100 100 100 40 40 40 3000 1250 200 200 200 200 200 200 50 40 4000 1000 1000 800 500
Number of Input Channels Interface 1 SE, 1 PDiff Serial, SPI 1 Diff Serial, SPI 1 SE, 1 PDiff P8/P16/P18 1 SE, 1 PDiff P8/P16/P18 1 SE, 1 PDiff P8/P16 1 Diff P8/P16 1 SE, 1 PDiff P8/P16 1 Diff P8/P16 1 SE, 1 PDiff P8/P16 1 Diff P8/P16 1 SE, 1 PDiff P8/P16 1 SE, 1 PDiff Serial, SPI 1 Diff Serial, SPI 1 PDiff P8/P16 1 Diff P8/P16 2 x 2 Diff Serial, SPI 1 SE Serial, SPI 1 SE P16 SE P8/P16 1 SE P16 1 SE P16 1 x 6 Diff P16 1 SE Serial, SPI 1 PDiff Serial, SPI 1 SE P8/P16 1 SE Serial, SPI 1 PDiff Serial, SPI 1 Diff Serial, SPI 1 PDiff Serial, SPI 4 SE/2 Diff Serial, SPI 4 SE/2 Diff Serial, SPI 8 SE/4 Diff Serial, SPI 8 SE/4 Diff Serial, SPI 1 SE Serial, SPI/P8 1 SE Serial, SPI 4 SE Serial, SPI/P8 1 SE P8/P14 1 SE Serial, SPI 1 SE Serial, SPI 4 SE/2 Diff Serial, SPI 1 Diff Serial, SPI 8 SE/4 Diff Serial, SPI 4 SE Serial, SPI 8 SE Serial, SPI 1 Diff Serial, SPI 8 SE/4 Diff Serial, SPI 1 SE P8/P12 12 Diff Serial, SPI/P12 1 SE, 1 PDiff Serial, SPI 1 SE P12 1 PDiff Serial, SPI
Input Voltage (V) VREF VREF (4.2V) at VREF/2 VREF VREF VREF VREF (4.2V) at VREF/2 VREF VREF (4.2V) at VREF/2 VREF VREF (4.2V) at VREF/2 VREF VREF VREF (4.2V) at VREF/2 5 2.5V at 2.5 2.5V at +2.5 +4, 5, 10; 3.3, 5, 10 10 2.5 2.5 2.5 2.5V at +2.5 VREF VREF 10 +4, 10, 3.3, 5, 10 VREF VREF at +VREF VREF VREF VREF at VREF VREF VREF at VREF 4, 5, 10 +4, 10, 3.3, 5, 10 10 2.5 2.5 VREF 4 VREF 4 10 10 VREF at +VREF PGA (1, 2, 4, 8, 10, 16, 20) 2.5 2.5 at +2.5 VDD (2.35V to 5.25V) 10 5
VREF Int/Ext Int/Ext Ext Ext Int Int Int Int Int/Ext Int/Ext Ext Int/Ext Int/Ext Int/Ext Int/Ext Int/Ext Int/Ext Int/Ext Ext Int/Ext Int/Ext Int/Ext Ext Ext Int/Ext Int/Ext Ext Ext Ext Ext Ext Ext Ext Int/Ext Int/Ext Int/Ext Int Int Ext Int/Ext Ext Int/Ext Ext Ext Ext Int Int Int/Ext Ext (VDD) Int/Ext Int
Linearity (%) 0.0015 0.0012 0.0015 0.0026 0.0038 0.0038 0.0053 0.0053 0.003 0.003 0.0023 0.0015 0.0012 0.009 0.009 0.00375 0.003 0.0045 0.006 0.006 0.006 0.0045 0.0038 0.0038 0.0045 0.0045 0.012 0.012 0.006 0.006 0.006 0.006 0.006 0.0022 0.003 0.003 0.009 0.009 0.006 0.006 0.006 0.006 0.006 0.006 0.012 0.03 0.024 0.048 0.036 0.018 0.024
NMC 18 18 16 18 16 16 16 16 16 16 16 16 16 15 15 14 16 16 16 15 15 14 16 16 16 16 15 15 16 15 15 15 15 16 16 16 14 14 14 14 14 14 14 14 14 13 12 11 12 12 12
SINAD (dB) 91 96 93 85 87 90 85 88 85 90 87 90 94 83 83 83 86 86 85 87 84 82.5 84.5 84.5 86 88 84 84 91 86 86 86 85 88 89 83 78 78 81.5 81 81.5 81 79 79 78 71.5 70 71 70
Power (mW) 115 115 115 110 155 155 155 155 155 155 130 110 110 85 85 150 70 70 200 200 200 413 17.5 17.5 81.5 81.5 1.95 5.5 2.25 3.6 3.6 3.6 3.6 28 35 50 90 90 17.5 20 17.5 20 29 29 2.5 6 110 175 17.5 225 11
Package(s) 6 X 6 QFN-28 6 X 6 QFN-28 TQFP-48 TQFP-48 TQFP-48 TQFP-48 TQFP-48 TQFP-48 TQFP-48 TQFP-48 TQFP-48 6 X 6 QFN-28 6 X 6 QFN-28 TQFP-32 TQFP-32 SSOP-24 SOIC-20, SSOP-28 SOIC-28, SSOP-28 TQFP-48 SOIC-28 SOIC-28 TQFP-64 SOIC-8, VSSOP-8 SOIC-8, VSSOP-8 PDIP-28, SOIC-28 SOIC-20 VSSOP-8 VSSOP-8 VSSOP-8, QFN-8 SSOP-16 SSOP-16 SSOP-20 SSOP-20 PDIP-28, SOIC-28 PDIP-16, SOIC-16 PDIP-28, SOIC-28 TQFP-48 TQFP-48 SOIC-8, VSSOP-8 SOIC-20, TSSOP-20 SOIC-8, VSSOP-8 SOIC-24, TSSOP-24 SOIC-24, TSSOP-24 SOIC-24, TSSOP-24 VSSOP-8 SSOP-28 TQFP-48 TQFP-100 SOT23-6, SC-70 SOIC-28 PDIP-8, VSSOP-8
Price1 $16.50 $16.95 $16.65 $15.75 $22.00 $23.05 $12.55 $13.15 $14.10 $14.70 $12.00 $12.50 $13.00 $7.10 $7.10 $10.35 $12.95 $12.95 $11.30 $36.15 $21.30 $18.10 $6.85 $6.85 $21.80 $21.80 $5.15 $5.15 $5.90 $7.40 $7.45 $8.00 $8.00 $27.40 $21.30 $29.55 $10.50 $10.50 $5.00 $6.00 $5.00 $6.40 $6.85 $8.65 $4.15 $5.00 $7.35 $14.60 $2.25 $27.80 $2.50
58
Selection Tables
Data Converters
Sample Rate (kSPS) 500 500 500 500 500 500 400 400 400 400 400 333 250 250 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 125 200 100 100 100 75 66 Number of Input Channels 1 PDiff 1 Diff 8 SE 2 x 2 Diff 2 x 2 Diff 3 x 2 Diff 1 SE 2 SE 4 SE 1 PDiff 8 SE 1 SE 1 SE 1 SE 1 SE/1 PDiff 1 PDiff 1 Diff 4 SE/2 Diff 4 SE 8 SE/4 Diff 4 SE 8 SE 1 SE 2 SE 4 SE 1 PDiff 8 SE 11 SE 11 SE 1 PDiff 8 SE I/O DAS 8 DAS 1 SE 1 SE 1 PDiff 11 SE
SAR ADCs Selection Guide (Continued)

Device ADS7834 ADS7835 ADS7852 ADS7861 ADS7862 ADS7864 TLC2551 TLC2552 TLC2554 TLC2555 TLC2558 ADS7800 ADS8508 ADS8504 ADS7866 ADS7816 ADS7817 ADS7841 ADS7842 ADS7844 TLC2574 TLC2578 TLV2541 TLV2542 TLV2544 TLV2545 TLV2548 TLV2553 TLV2556 ADS7829 AMC7823 AMC7820 ADS7804 ADS7808 ADS7822 TLC2543 Res. (Bits) 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Interface Serial, SPI Serial, SPI P12 Serial, SPI P12 P12 Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI P8/P12 Serial, SPI P8/P16 Serial, SPI Serial, SPI Serial, SPI Serial, SPI P12 Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI P8/P16 Serial, SPI Serial, SPI Serial, SPI Input Voltage (V) 2.5 2.5 5 2.5 at +2.5 2.5 at +2.5 2.5 at +2.5 VREF VREF 4 VREF 4 5, 10 +4, 10, 3.3, 5, 10 10 VDD (1.2V to 3.6V) VREF VREF at +VREF VREF, VREF at VREF VREF VREF, VREF at VREF 10 10 VREF VREF +2, 4 +5.5 (VREF = VDD) +2, 4 VREF VREF VREF 5 5 10 +4, 10 , 3.3, 5, 10 VREF VREF VREF Int Int Int/Ext Int/Ext Int/Ext Int/Ext Ext Ext Int/Ext Ext Int/Ext Int Int/Ext Int/Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Int/Ext Ext Int/Ext Ext Int/Ext Ext Int/Ext Int Int/Ext Int/Ext Ext Ext Linearity (%) 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.012 0.011 0.011 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.018 0.024 0.024 0.011 0.011 0.018 0.024 NMC 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 SINAD (dB) 70 72 72 70 71 71 72 72 71 72 71 72 73 72 70 72 71 72 72 72 79 79 72 72 70 72 70 71 74 72 (typ) 72 73 71 Power (mW) 11 17.5 13 25 25 52.5 15 15 9.5 15 9.5 135 70 70 0.25 1.9 2.3 0.84 0.84 0.84 29 29 2.8 2.8 3.3 2.8 3.3 2.43 2.43 0.6 100 40 81.5 81.5 0.6 5 Package(s) VSSOP-8 VSSOP-8 TQFP-32 SSOP-24 TQFP-32 TQFP-48 SOIC-8, VSSOP-8 SOIC-8, VSSOP-8 SOIC-16, TSSOP-16 SOIC-8, VSSOP-8 SOIC-20, TSSOP-20 CDIP SB-24, PDIP-24 SSOP-28, SOIC-20 SSOP-28, SOIC-28 SOT23-6 PDIP-8, SOIC-8, VSSOP-8 SOIC-8, VSSOP-8 SSOP-16 SSOP-28 SSOP-20 SOIC-20, TSSOP-20 SOIC-24, TSSOP-24 SOIC-8, VSSOP-8 SOIC-8, VSSOP-8 SOIC-16, TSSOP-16 SOIC-8, VSSOP-8 SOIC-20, TSSOP-20 SOIC-20, TSSOP-20 SOIC-20, TSSOP-20 QFN-8 QFN-40 TQFP-48 PDIP-28, SOIC-28 SOIC-20 PDIP-8, SOIC-8, VSSOP-8, CDIP-20, PDIP-20, PLCC-20, SOIC-20, SSOP-20 PDIP-20, SOIC-20, SSOP-20 VSSOP-8 TSSOP-16 SSOP-28 PDIP-28, SOIC-28 PDIP-16, SOIC-16 PDIP-28, SOIC-28 PDIP-8, SOIC-8 SOIC-20, TSSOP-20 SOIC-24, TSSOP-24 Price1 $2.45 $2.75 $3.40 $4.05 $5.70 $6.65 $3.95 $3.95 $5.30 $3.95 $5.30 $30.50 $8.90 $8.90 $2.15 $1.95 $1.95 $2.50 $3.10 $2.90 $5.30 $5.80 $3.85 $3.85 $4.20 $3.85 $4.85 $3.40 $3.55 $1.50 $9.75 $3.75 $14.05 $10.85 $1.55 $4.45
TLV2543 ADS7823 ADS7828 ADS7870 ADS7806 ADS7812 ADS7824 ADS1286 TLV1570 TLV1571
1Suggested
12 12 12 12 12 12 12 12 10 10
66 50 50 50 40 40 40 37 1250 1250
11 SE 1 SE 8 SE/4 Diff 8 SE 1 SE 1 SE 4 SE 1 PDiff 8 SE 1 SE
Serial, SPI Serial, I2C Serial, I2C Serial, SPI Serial, SPI/P8 Serial, SPI Serial, SPI/P8 Serial, SPI Serial, SPI Serial, SPI
VREF VREF VREF PGA(1, 2, 4, 8, 10, 16, 20) +4, 5, 10 +4, 10, 3.3, 5, 10 10 VREF 2V, VREF VREF
Ext Ext Int/Ext Int Int/Ext Int/Ext Int/Ext Ext Int/Ext Ext
0.024 0.024 0.024 0.06 0.011 0.012 0.012 0.024 0.1 0.1
12 12 12 12 12 12 12 12 10 10
71 71 72 73 74 73 72 60 60
3.3 0.75 0.675 4.6 28 35 50 1 9 12
$4.45 $2.85 $3.35 $4.15 $12.75 $11.80 $13.10 $2.80 $3.80 $3.70
Selection Tables
Data Converters
SAR ADCs Selection Guide (Continued)
Device TLV1572 TLV1578 ADS7887 TLC1514 TLC1518 ADS7867 ADS7826 TLV1504 TLV1508 TLC1550 TLC1551 TLV1544 TLV1548 TLC1542 Res. (Bits) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Sample Rate (kSPS) 1250 1250 1000 400 400 200 200 200 200 164 164 85 85 38 Number of Input Channels 1 SE 8 SE 1 SE, 1 PDiff 4 SE/3 Diff 8 SE/7 Diff 1 SE, 1 PDiff 1 PDiff 4 SE 8 SE 1 SE 1 SE 4 SE 8 SE 11 SE Interface Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI P10 P10 Serial, SPI Serial, SPI Serial, SPI Input Voltage (V) VREF VREF VDD (2.35V to 5.25V) +5.5 (VREF = VDD) +5.5 (VREF = VDD) VDD (1.2V to 3.6V) VREF +2, 4 +2, 4 VREF VREF VREF VREF VREF VREF Ext Ext Ext (VDD) Int/Ext Int/Ext Ext Ext Int/Ext Int/Ext Ext Ext Ext Ext Ext Linearity (%) 0.1 0.1 0.073 0.012 0.012 0.05 0.0048 0.05 0.05 0.05 0.1 0.1 0.1 0.05 NMC 10 10 10 10 10 10 10 10 10 10 10 10 10 10 SINAD (dB) 60 60 61 60 60 61 62 60 60 Power (mW) 8.1 12 17.5 10 10 0.25 0.6 3.3 3.3 10 10 1.05 1.05 4 Package(s) SOIC-8 TSSOP-32 SOT23-6, SC-70 SOIC-16, TSSOP-16 SOIC-20, TSSOP-20 SOT23-6 QFN-8 SOIC-16, TSSOP-16 SOIC-20, TSSOP-20 PLCC-28, SOIC-24 PLCC-28, SOIC-24 SOIC-16, TSSOP-16 CDIP-20, LCCC-20, SSOP-20 CDIP-20, LCCC-20, PDIP-20, PLCC-20, SOIC-20 PLCC-20, SOIC-20, SSOP-20 PDIP-8, SOIC-8 CDIP-20, LCCC-20, PDIP-20, PLCC-20, SOIC-20, SSOP-20 PDIP-8, SOIC-8 PDIP-20, PLCC-20, SOIC-20 SOIC-24, TSSOP-24 SOT23-6, SC-70 PLCC-20, SOIC-20, SSOP-20 QFN-8 SOT23-6 PDIP-28, PLCC-28 TSSOP-16 PDIP-8, SOIC-8 PDIP-8, SOIC-8 PDIP-8, SOIC-8 PDIP-14, SOIC-14, TSSOP-14 PDIP-20, PLCC-20, SOIC-20 PDIP-8, SOIC-8 PDIP-20, SOIC-20, TSSOP-20 PDIP-8, SOIC-8 PDIP-20, PLCC-20, SOIC-20 PDIP-8, SOIC-8 PDIP-14, SOIC-14 PDIP-20, SOIC-20, TSSOP-20 Price1 $3.30 $3.85 $1.65 $2.90 $3.45 $1.55 $1.25 $2.65 $3.15 $3.90 $3.35 $1.95 $2.30 $2.50
59
TLC1543 TLC1549 TLV1543
10 10 10
38 38 38
11 SE 1 SE 11 SE
Serial, SPI Serial, SPI Serial, SPI
VREF VREF VREF
Ext Ext Ext
0.1 0.1 0.1
10 10 10
4 4 2.64
$1.90 $1.71 $2.15
TLV1549 TLC1541 TLV571 ADS7888 TLC0820A ADS7827 ADS7868 TLC545 ADS7830 TLV0831 TLC548 TLV0832 TLV0834 TLC541 TLC549 TLV0838 TLC0831 TLC542 TLC0832 TLC0834 TLC0838
1Suggested
10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
38 32 1250 1000 392 250 200 76 75 49 45.5 44.7 41 40 40 37.9 31 25 22 20 20
1 SE 11 SE 1 SE 1 SE, 1 PDiff 1 SE 1 PDiff 1 SE, 1 PDiff 19 SE 8 SE/4 Diff 1 SE 1 SE 2 SE/1 Diff 4 SE/2 Diff 11 SE 1 SE 8 SE/4 Diff 1 Diff 11 SE 2 SE/1 Diff 4 SE/2 Diff 8 SE/4 Diff
Serial, SPI Serial, SPI P8 Serial, SPI P8 Serial, SPI Serial, SPI Serial, SPI Serial, I2C Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI
VREF VREF VREF VDD (2.35V to 5.25V) VREF VREF VDD (1.2V to 3.6V) VREF VREF +3.6 (VREF = VDD) VREF VREF VREF VREF VREF VREF VREF VREF VREF VREF VREF
Ext Ext Ext Ext (VDD) Ext Ext Ext Ext Int/Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext
0.1 0.1 0.5 0.2 0.2 0.2 0.1 0.2 0.19 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
49 49 48 50 50
1.32 6 12 17.5 37.5 0.6 0.25 6 0.675 0.66 9 5 0.66 6 9 0.66 3 6 12.5 3 3
$1.85 $3.20 $2.35 $1.25 $1.90 $1.00 $1.35 $3.10 $1.40 $1.40 $1.20 $1.40 $1.45 $1.50 $0.95 $1.45 $1.40 $1.50 $1.40 $1.45 $1.45
60
Selection Tables
Data Converters
ADC Res. (Bits) 24 24 24 24 24 24 24 16 Sample Rate (kSPS) 1 1 1 1 1 1 1 2 Number of Input Channels 8 Diff/8 SE 6 Diff/6 SE 8 Diff/8 SE 8 Diff/8 SE 8 Diff/8 SE 8 Diff/8 SE 8 Diff/8 SE 6 Diff/6 SE Program Memory (kB) 8 8 32 4 32 4 32 8 Program Memory Type Flash Flash Flash Flash Flash Flash Flash Flash
8051-Based Intelligent ADC Selection Guide

Device MSC1200Y3 MSC1201Y3 MSC1210Y5 MSC1211Y2 MSC1211Y5 MSC1213Y2 MSC1213Y5 MSC1202Y3
1Suggested
Input Voltage (V) PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5 PGA (1-128), 2.5
VREF Int Int Int Int Int Int Int Int
CPU Core 8051 8051 8051 8051 8051 8051 8051 8051
SRAM (kB) 0.1 0.1 1.2 1.2 1.2 1.2 1.2 0.2
Power (mW/V) 3/2.7-5.25 3/2.7-5.25 4/2.7-5.25 4/2.7-5.25 4/2.7-5.25 4/2.7-5.25 4/2.7-5.25 3/2.7-5.25
DAC Output (Bits) 8-Bit IDAC 8-Bit IDAC 16-Bit PWM 4 x 16-Bit I/VDAC 4 x 16-Bit I/VDAC 2 x 16-Bit I/VDAC 2 x 16-Bit I/VDAC 8-Bit IDAC
Price1 $6.45 $5.95 $12.00 $17.50 $20.95 $12.65 $15.95 $4.95
DACs Selection GuideNumber of

Device DAC1220 DAC1221
1Suggested
Res. (Bits) 20 16
Settling Time (ms) 10 2
Number of Output DACs 1 1
Interface Serial, SPI Serial, SPI
Output (V) 5 2.5
VREF Ext Ext
Linearity (%) 0.0015 0.0015
Monotonic (Bits) 20 16
Power (mW) 2.5 1.2
Package SSOP-16 SSOP-16
Price1 $6.65 $5.25
String and R-2R DACs Selection Guide

Device DAC7654 DAC7664 DAC7634 DAC7641 DAC7642 DAC7643 DAC7644 DAC7734 DAC712 DAC714 DAC715 DAC716 DAC7631 DAC7632 DAC7744 DAC8501 DAC8531 DAC8532 DAC8544 DAC8534 DAC8541 DAC8554 DAC8571 DAC8574 DAC7731 DAC7742 DAC7741
1Suggested
Architecture R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R String String String String String String String String String R-2R R-2R R-2R
Res. (Bits) 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
Settling Time (s) 12 12 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 10 10 10 10 10 5 5 5
Number of Output DACs 4 4 4 1 2 2 4 4 1 1 1 1 1 2 4 1 1 2 4 4 1 4 1 4 1 1 1
Interface Serial, SPI P16 Serial, SPI P16 P16 P16 P16 Serial, SPI P16 Serial, SPI P16 Serial, SPI Serial, SPI Serial, SPI P16 Serial, SPI Serial, SPI Serial, SPI Parallel Serial, SPI P16 Serial, SPI Serial, I2C Serial, I2C Serial, SPI P16 P16
Output (V) 2.5 2.5 +VREF, VREF +VREF, VREF +VREF, VREF +VREF, VREF +VREF, VREF +VREF, VREF 10 10 +10 +10 +VREF, VREF +VREF, VREF +VREF, VREF VREF /MDAC +VREF +VREF +VREF +VREF +VREF +VREF +VREF +VREF +10, 10 +10, 10 +10, 10
VREF Int Int Ext Ext Ext Ext Ext Ext Int Int Int Int Ext Ext Ext Ext Ext Ext Ext Ext Ext ext Ext Ext Int/Ext Int/Ext Int/Ext
Linearity (%) 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.003 0.0015 0.003 0.003 0.0015 0.0015 0.0015 0.0987 0.0987 0.0987 0.025 0.0987 0.096 0.0122 0.0987 0.0987 0.0015 0.0015 0.0015
Monotonic (Bits) 16 16 15 15 15 15 15 16 15 16 16 16 15 15 16 16 16 16 16 16 16 16 16 16 16 16 16
Power (mW) (typ) 18 18 7.5 1.8 2.5 2.5 7.5 50 525 525 525 525 1.8 2.5 50 0.72 0.72 1.35 4.75 2.7 0.72 1 0.42 2.7 100 100 100
Package(s) LQFP-64 LQFP-64 SSOP-48 TQFP-32 LQFP-32 LQFP-32 SSOP-48 SSOP-48 SOIC-28 SOIC-16 SOIC-28 SOIC-16 SSOP-20 LQFP-32 SSOP-48 VSSOP-8 VSSOP-8, QFN 3 x 3 VSSOP-8 QFN 5 x 5 TSSOP-16 TQFP-32 MSOP-8, SON-8 MSOP-8 TSSOP-16 SSOP-24 LQFP-48 LQFP-48
Price1 $21.80 $20.75 $19.95 $6.30 $10.55 $10.55 $19.95 $31.45 $14.50 $14.50 $15.85 $15.85 $5.85 $10.45 $31.45 $3.00 $3.00 $5.35 $9.75 $9.75 $3.00 $3.45 $2.95 $10.25 $8.20 $8.70 $8.30
Selection Tables
Data Converters
String and R-2R DACs Selection Guide (Continued)
Device DAC8811 DAC8814 DAC8830 DAC8831 DAC8803 DAC8801 DAC7512 DAC7513 DAC7571 DAC7573 DAC7574 DAC7611 DAC7612 DAC7613 DAC7614 DAC7615 DAC7616 DAC7617 DAC7621 DAC7624 DAC7625 DAC7714 DAC7715 DAC7724 DAC7725 DAC7551 DAC7552 DAC7553 DAC7554 DAC7558 DAC811 DAC813 TLV5614 TLV5616 TLV5618A DAC7545 DAC7541 DAC8043 TLV5610 TLV5613 TLV5619 TLV5630 TLV5633 TLV5636 TLV5638
1Suggested
61
Architecture R-2R R-2R R-2R R-2R R-2R R-2R String String String String String R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R R-2R String String String String String R-2R R-2R String String String R-2R R-2R R-2R String String String String String String String
Res. (Bits) 16 16 16 16 14 14 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Settling Time (s) 0.5 1.0 1.0 1.0 1.0 0.5 10 10 10 10 10 7 7 10 10 10 10 10 7 10 10 10 10 10 10 5 5 5 5 5 4 4 3 3 2.5 2 1 1 1 1 1 1 1 1 1
Number of Output DACs 1 4 1 1 4 1 1 1 1 4 4 1 2 1 4 4 4 4 1 4 4 4 4 4 4 1 2 2 4 8 1 1 4 1 2 1 1 1 8 1 1 8 1 1 2
Interface Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, I2C Serial, I2C Serial, I2C Serial, SPI Serial, SPI P12 Serial, SPI Serial, SPI Serial, SPI Serial, SPI P12 P12 P12 Serial, SPI Serial, SPI P12 P12 Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI P12 P12 Serial, SPI Serial, SPI Serial, SPI P12 P12 Serial, SPI Serial, SPI P8 P12 Serial, SPI P8 Serial, SPI Serial, SPI
Output (V) VREF/MDAC VREF/MDAC +VREF +VREF VREF/MDAC VREF/MDAC VCC +VREF +VREF +VREF +VREF 4.096 4.096 +VREF, VREF +VREF, VREF +VREF, VREF +VREF, VREF +VREF, VREF 4.096 +VREF, VREF +VREF, VREF +VREF, VREF +VREF, VREF +VREF, VREF +VREF, VREF +VREF +VREF +VREF +VREF +VREF +10, 5, 10 +10, 5, 10 +VREF +VREF +VREF VREF/MDAC VREF/MDAC VREF/MDAC +VREF +VREF +VREF +VREF +2, 4 +2, 4 +2, 4
VREF Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Int Int Ext Ext Ext Ext Ext Int Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Int Int/Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Int/Ext Int/Ext Int/Ext Int/Ext
Linearity (%) 0.0015 0.0015 0.0015 0.0015 0.0061 0.0061 0.38 0.38 0.096 0.096 0.096 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.024 0.024 0.0244 0.012 0.006 0.006 0.1 0.1 0.08 0.012 0.012 0.012 0.4 0.1 0.08 0.4 0.08 0.1 0.1
Monotonic (Bits) 16 16 16 16 14 14 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Power (mW) (typ) 0.025 0.0275 0.015 0.015 0.0275 0.025 0.7 0.5 0.7 3 3 2.5 3.75 1.8 20 20 3 3 2.5 20 20 45 45 45 45 0.27 0.675 0.675 3.5 4.5 625 270 3.6 0.9 1.8 30 30 2.5 18 1.2 4.3 18 2.7 4.5 4.5
Package(s) MSOP-8, SON-8 SSOP-28 SOIC-8 SOIC-14 SSOP-28 MSOP-8, SON-8 VSSOP-8, SOT23-6 VSSOP-8, SSOP-8 SOP-6, SOT23-6 TSSOP-16 MSOP-10 PDIP-8, SOIC-8 SOIC-8 SSOP-24 PDIP-16, SOIC-16, SSOP-20 PDIP-16, SOIC-16, SSOP-20 SOIC-16, SSOP-20 SOIC-16, SSOP-20 SSOP-20 PDIP-28, SOIC-28 PDIP-28, SOIC-28 SOIC-16 SOIC-16 PLCC-28, SOIC-28 PLCC-28, SOIC-28 SON-12 QFN-16 QFN-16 MSOP-10 QFN-32 CDIP SB-28, PDIP-28, SOIC-28 PDIP-28, SOIC-28 SOIC-16, TSSOP-16 VSSOP-8, PDIP-8, SOIC-8 CDIP-8, PDIP-8, SOIC-8, LCCC-20 SOIC-20 PDIP-18, SOP-18 SOIC-8 SOIC-20, TSSOP-20 SOIC-20, TSSOP-20 SOIC-20, TSSOP-20 SOIC-20, TSSOP-20 SOIC-20, TSSOP-20 SOIC-8, VSSOP-8 SOIC-8, CDIP-8, LCCC-20
Price1 $8.50 $19.27 $7.95 $7.95 $14.40 $5.50 $1.45 $1.45 $1.55 $6.15 $6.15 $2.55 $2.70 $2.50 $6.70 $6.70 $5.40 $5.40 $2.75 $10.25 $10.25 $11.45 $11.45 $11.85 $11.85 $1.40 $2.35 $2.35 $5.60 $10.40 $11.00 $12.60 $7.45 $2.60 $4.75 $5.25 $6.70 $5.25 $8.50 $2.60 $2.60 $8.85 $4.70 $3.65 $3.25
62
Selection Tables
Data Converters
Settling Time (s) 1 0.8 0.8 0.8 0.2 0.2 12.5 9 9 9 3 3 2.5 1 1 0.8 10 10 10 10 10 8 8 8 5 5 3 3 2.5 1 1 1 0.8 0.1 0.1 0.1 Number of Output DACs 1 2 2 2 1 1 1 1 4 4 4 1 2 8 8 2 4 8 4 4 8 1 4 4 4 4 1 2 4 1 8 8 2 1 2 2 Power (mW) (typ) 2.7 1 1 1 0.0275 0.0275 0.75 0.5 1.5 1.5 3 0.9 1.8 18 18 4.2 8 15 6 3.6 12 0.5 1.5 1.5 75 90 2.1 2.4 3 0.9 18 18 4.2 5 7.5 20
String and R-2R DACs Selection Guide (Continued)

Device TLV5639 DAC7800 DAC7801 DAC7802 DAC7811 DAC7821 TLC5615 DAC6571 DAC6573 DAC6574 TLV5604 TLV5606 TLV5617A TLV5608 TLV5631 TLV5637 TLC5620 TLC5628 TLV5620 TLV5621 TLV5628 DAC5571 DAC5573 DAC5574 TLC7225 TLC7226 TLV5623 TLV5625 TLV5627 TLV5624 TLV5629 TLV5632 TLV5626 TLC7524 TLC7528 TLC7628
1Suggested
Architecture String R-2R R-2R R-2R R-2R R-2R String String String String String String String String String String String String R-2R R-2R String String String String R-2R R-2R String String String String String String String R-2R R-2R R-2R
Res. (Bits) 12 12 12 12 12 12 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Interface P12 Serial, SPI P12 P12 Serial, SPI P12 Serial, SPI Serial, I2C Serial, I2C Serial, I2C Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, I2C Serial, I2C Serial, I2C P8 P8 Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI Serial, SPI P8 P8 P8
Output (V) +2, 4 1mA 1mA 1mA VREF/MDAC VREF/MDAC +VREF VDD +VREF +VREF +VREF +VREF +VREF +VREF +VREF +2, 4 +VREF +VREF +VREF +VREF +VREF VDD +VREF +VREF +VREF VREF +VREF +VREF +VREF +2, 4 Ext +2, 4 +2, 4 1mA 1mA 2mA
VREF Int/Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Ext Int/Ext Int/Ext Ext Ext Ext Ext Ext Int Ext Ext Ext Ext Ext Ext Ext Int/Ext Ext Int/Ext Int/Ext Ext Ext Ext
Linearity (%) 0.1 0.012 0.012 0.012 0.0120 0.0120 0.1 0.195 0.195 0.195 0.05 0.15 0.1 0.4 0.4 0.1 0.4 0.4 0.2 0.4 0.4 0.195 0.195 0.195 0.4 0.4 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.2 0.2 0.2
Monotonic (Bits) 12 12 12 12 12 12 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Package(s) SOIC-20, TSSOP-20 PDIP-16, SOIC-16 PDIP-24, SOIC-24 PDIP-24, SOIC-24 MSOP-10, SON-8 QFN-20, TSSOP-20 PDIP-8, SOIC-8, VSSOP-8 SOP-6 TSSOP-16 VSSOP-10 SOIC-16, TSSOP-16 SOIC-8, VSSOP-8 SOIC-8 SOIC-20, TSSOP-20 SOIC-20, TSSOP-20 SOIC-8 PDIP-14, SOIC-14 PDIP-16, SOIC-16 PDIP-14, SOIC-14 SOIC-14 PDIP-16, SOIC-16 SOP-6 TSSOP-16 VSSOP-10 SOIC-24 PDIP-20, SOIC-20 SOIC-8, VSSOP-8 SOIC-8 SOIC-16, TSSOP-16 SOIC-8, VSSOP-8 SOIC-20, TSSOP-20 SOIC-20, TSSOP-20 SOIC-8 PDIP-16, PLCC-20, SOIC-16, TSSOP-16 PDIP-20, PLCC-20, SOIC-20, TSSOP-20 SOIC-20, PDIP-20
Price1 $3.45 $13.55 $17.95 $14.00 $3.15 $3.15 $1.90 $1.40 $3.05 $3.05 $3.70 $1.30 $2.25 $4.90 $5.60 $3.20 $1.50 $2.45 $1.00 $1.65 $2.20 $0.90 $2.55 $2.55 $2.35 $2.15 $0.99 $1.70 $2.05 $1.60 $3.15 $3.35 $1.90 $1.45 $1.55 $1.45
Preview products are listed in bold blue.
Selection Tables
Data Converters/Digital Signal Controllers
High-Speed DACs Selection Guide
Device DAC904 THS5671A DAC5687 DAC902 THS5661A DAC900 THS5651A DAC2904 DAC2902 DAC2900 DAC5652 DAC5662 DAC5672 DAC5675A DAC5686 DAC2932 DAC5674
1Suggested
63
Res. (Bits) 14 14 16 12 12 10 10 14 12 10 10 12 14 14 14 12 12
Supply (V) 3.0 to 5.0 3.0 to 5.0 1.8/3.3 3.0 to 5.0 3.0 to 5.0 3.0 to 5.0 3.0 to 5.0 3.3 to 5.0 3.3 to 5.0 3.3 to 5.0 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 3.3 1.8/3.3 2.7 to 3.3 1.8/3.3
Update Rate (MSPS) 165 125 500 165 125 165 125 125 125 125 200 200 200 400 500 40 400
Settling Time (ns) 30 35 12 30 35 30 35 30 30 30 20 20 20 12 12 25 20
Number of DACs 1 1 2 1 1 1 1 2 2 2 1 2 2 1 2 2 1
Power Typ (mW) 170 175 750 to 1400 170 175 170 175 310 310 310 290 330 330 660 400 29 420
DNL max (LSB) 1.75 3.5 3 1.75 2.0 0.5 0.5 2.5 1 0.5 2 3 2 9 0.5 2
INL max (LSB) 2.5 7 6 2.5 4 1 1 3 1 1 2 4 4 12 2 3.5
Package(s) 28-SOP, 28-TSSOP 28-SOP, 28-TSSOP 100-HTQFP 28-SOP, 28-TSSOP 28-SOP, 28-TSSOP 28-SOP, 28-TSSOP 28-SOP, 28-TSSOP 48-TQFP 48-TQFP 48-TQFP 48-TQFP 48-TQFP 48-TQFP 48-HTQFP 100-HTQFP 48-TQFP 48-HTQFP
Price1 $7.35 $7.35 $22.50 $5.95 $6.60 $4.20 $4.50 $12.00 $10.70 $6.00 $7.60 $10.70 $13.25 $25.00 $19.75 $8.35 $15.00
TMS320C28x Controller Generation

Boot MIPS ROM 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 8KB 12-Bit # # A/D Chs/ Core Flash/ CAP/ PWM Hi-Res Conversion WD Comm Ports I/O Voltage ROM Timers QEP Channels PWM Time (ns) EMIF Timer Other SPI SCI CAN Pins (V) Packaging ($U.S.)+ 32KB 32KB 64KB 64KB 128KB 128KB 128KB 256KB 256KB 256KB 128KB 256KB 256KB 256KB 9 9 15 15 15 15 7 7 7 7 7 7 7 7 7 7 7 2/1 2/1 4/2 4/2 4/2 4/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6/2 6+2 6+2 12 + 4 12 + 4 12 + 4 12 + 4 16 16 16 16 16 16 16 16 16 16 16 3 3 4 4 4 4 16Ch/160 16Ch/160 16Ch/160 16Ch/160 16Ch/160 16Ch/160 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 16Ch/80 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y I2C I2C I2C I2C I2C I2C McBSP McBSP McBSP McBSP 2 2 4 4 4 4 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 32 32 32 32 32 32 56 56 56 56 56 56 56 56 56 56 56 1.8 1.8 1.8 1.8 1.8 1.8 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 100-LQFP 100-BGA 100-LQFP 100-BGA 100-LQFP 100-BGA 128-LQFP 128-LQFP 179-BGA 176-LQFP $5.79 $5.79 $8.69 $8.69 $11.52 $11.52 $13.81 $14.73 $15.65 $15.65
Device
RAM 12KB 12KB 20KB 20KB 36KB 36KB 36KB 36KB 36KB 36KB 40KB 40KB 40KB 36KB 36KB 36KB 36KB
Flash Devices
TMS320F2801-PZA/S/Q TMS320F2801-GGMA/S/Q TMS320F2806-PZA/S/Q TMS320F2806-GGMA/S/Q TMS320F2808-PZA/S/Q TMS320F2808-GGMA/S/Q TMS320F2810-PBKA/S/Q TMS320F2811-PBKA/S/Q TMS320F2812-GHHA/S/Q TMS320F2812-PGFA/S/Q
RAM-Only Devices
TMS320R2811-PBKA/Q TMS320R2812-GHHA/Q TMS320R2812-PGFA/Q McBSP 1 McBSP 1 McBSP 1 McBSP McBSP McBSP McBSP 1 1 1 1 128-LQFP $9.11 179-BGA $10.63 176-LQFP $10.63 128-LQFP 128-LQFP 179-BGA 176-LQFP $7.05 $8.22 $9.59 $9.59
ROM Devices
TMS320C2810-PBKA/Q TMS320C2811-PBKA/Q TMS320C2812-GHHA/Q TMS320C2812-PGFA/Q
+
Prices are quoted in U.S. dollars and represent year 2006 suggested resale pricing. All prices are subject to change. Customers are advised to obtain the most current and complete pricing information from TI prior to placing orders. TI may verify final pricing prior to accepting any order. Minimum volumes for C281x devices are 10 KU with NRE of $11,000. A = 40 to 85C; S = 40 to 125C (10% adder over A); Q = 40 to 125C, Q100 qualified (15% adder over S) All devices are available in PB-Free Green packaging.
64
Selection Tables
Microcontrollers
Prgm. (kB) 1 1 2 2 4 4 4 8 4 8 4 8 8 16 8 16 32 48 60 32 48 60 16 24 32 32 48 60 32 48 55 1 2 1 2 1 2 1 2 4 8 8 16 32 Timer A B 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 7 7 7 7 7 7 3 3 3 7 7 7 7 7 7 3 3 3 SPI, I2C

MSP430 Ultra-Low-Power Microcontrollers Selection Guide

Device MSP430F1101A MSP430C1101 MSP430F1111A MSP430C1111 MSP430F1121A MSP430C1121 MSP430F1122 MSP430F1132 MSP430F1222 MSP430F1232 MSP430F122 MSP430F123 MSP430C1331 MSP430C1351 MSP430F133 MSP430F135 MSP430F147 MSP430F148 MSP430F149 MSP430F1471 MSP430F1481 MSP430F1491 MSP430F155 MSP430F156 MSP430F157 MSP430F167 MSP430F168 MSP430F169 MSP430F1610 MSP430F1611 MSP430F1612 MSP430F2001 MSP430F2011 MSP430F2002 MSP430F2012 MSP430F2003 MSP430F2013 MSP430F2101 MSP430F2111 MSP430F2121 MSP430F2131 MSP430F2234 MSP430F2254 MSP430F2274
1Suggested
SRAM 128 128 128 128 256 256 256 256 256 256 256 256 256 512 256 512 1024 2048 2048 1024 2048 2048 512 1024 1024 1024 2048 2048 5120 10240 5120 128 128 128 128 128 128 128 128 256 256 512 512 1024
I/O 14 14 14 14 14 14 14 14 22 22 22 22 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 10 10 10 10 10 10 16 16 16 16 32 32 32
DMA USART

SVS

BOR

MPY

Comp A

Temp Sensor

ADC Ch/Res Slope Slope Slope Slope Slope Slope 5/10 5/10 8/10 8/10 Slope Slope Slope Slope 8/12 8/12 8/12 8/12 8/12 Slope Slope Slope 8/12 8/12 8/12 8/12 8/12 8/12 8/12 8/12 8/12 Slope Slope 1/10 1/10 1/16 1/16 Slope Slope Slope Slope 1/10 1/10 1/10
DAC Ch/Res 2/12 2/12 2/12 2/12 2/12 2/12 2/12 2/12 2/12 2/Amp 2/Amp 2/Amp
Package(s) 20-SOIC, 20-TSSOP 20-TVSOP, 24-QFN 20-SOP, 20-TSSOP, 24-QFN 20-SOIC, 20-TSSOP 20-TVSOP, 24-QFN 20-SOP, 20-TSSOP, 24-QFN 20-SOIC, 20-TSSOP 20-TVSOP, 24-QFN 20-SOP, 20-TSSOP, 24-QFN 20-SOIC, 20-TSSOP, 32-QFN 20-SOIC, 20-TSSOP, 32-QFN 28-SOIC, 28-TSSOP, 32-QFN 28-SOIC, 28-TSSOP, 32-QFN 28-SOIC, 28-TSSOP, 32-QFN 28-SOIC, 28-TSSOP, 32-QFN 64-TQFP, 64-QFN 64-TQFP, 64-QFN 64-LQFP, 64-TQFP, 64-QFN 64-LQFP, 64-TQFP, 64-QFN 64-LQFP, 64-TQFP, 64-QFN 64-LQFP, 64-TQFP, 64-QFN 64-LQFP, 64-TQFP, 64-QFN 64-LQFP, 64-QFN 64-LQFP, 64-QFN 64-LQFP, 64-QFN 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 14-TSSOP, 14-PDIP, 16-QFN 14-TSSOP, 14-PDIP, 16-QFN 14-TSSOP, 14-PDIP, 16-QFN 14-TSSOP, 14-PDIP, 16-QFN 14-TSSOP, 14-PDIP, 16-QFN 14-TSSOP, 14-PDIP, 16-QFN 20-TSSOP, 20-SOIC, 24-QFN 20-TSSOP, 20-SOIC, 24-QFN 20-TSSOP, 20-SOIC, 24-QFN 20-TSSOP, 20-SOIC, 24-QFN 38-TSOP, 40-QFN 38-TSOP, 40-QFN 38-TSOP, 40-QFN
Price1 $0.99 $0.60 $1.35 $1.10 $1.70 $1.35 $2.00 $2.25 $2.40 $2.50 $2.15 $2.30 $2.00 $2.30 $3.00 $3.60 $5.05 $5.75 $6.05 $4.60 $5.30 $5.60 $4.95 $5.55 $5.85 $6.75 $7.45 $7.95 $8.25 $8.65 $8.95 $0.55 $0.70 $0.99 $1.15 $1.49 $1.65 $0.90 $0.99 $1.35 $1.70 $2.75 $3.15 $3.55
Flash/ROM-Based x1xx Family with 16-Bit Watchdog (VCC 1.8V to 3.6V)

1 1 1 1 1 1 1 1 2 2 2 2 2 2 1 1 1 2 2 2 2 2 2

2 2
Flash-Based F2xx Family with 16 MIPS and 16-Bit Watchdog (VCC 1.8-3.6V)

2 2 2 2
resale price in U.S. dollars in quantities of 1,000. 2Comparator A+.
Selection Tables
Microcontrollers/Interface
MSP430 Ultra-Low-Power Microcontrollers Selection Guide (Continued)
Device MSP430F412/C412 MSP430F413/C413 MSP430F415 MSP430F417 MSP430FW423 MSP430FW425 MSP430FW427 MSP430F4250 MSP430F4260 MSP430F4270 MSP430F423 MSP430F425 MSP430F427 MSP430FE423 MSP430FE425 MSP430FE427 MSP430F435 MSP430F436 MSP430F437 MSP430FG437 MSP430FG438 MSP430FG439 MSP430F447 MSP430F448 MSP430F449 MSP430FG4616 MSP430FG4617 MSP430FG4618 MSP430FG4619
1Suggested
65
Prgm. (kB) 4 8 16 32 8 16 32 16 24 32 8 16 32 8 16 32 16 24 32 32 48 60 32 48 60 92 92 116 120
SRAM (B) 256 256 512 1024 256 512 1024 256 256 256 256 512 1024 256 512 1024 512 1024 1024 1024 2048 2048 1024 2048 2048 4096 8192 8192 4096
I/O 48 48 48 48 48 48 48 32 32 32 14 14 14 14 14 14 48 48 48 48 48 48 48 48 48 80 80 80 80
Timer USART, LCD A B USCI2 Segments DMA SVS BOR 3 3 3, 5 3, 5 3, 5 3, 5 3, 5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 7 7 7 7 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1, 2 2, 2 2, 2 2, 2 96 96 96 96 96 96 96 56 56 56 128 128 128 128 128 128 128/160 128/160 128/160 128 128 128 128 128 128 160 160 160 160

MPY

Comp Temp A Sensor

ADC Ch/Res
DAC Ch/Res
Package(s) 64-LQFP, 64-QFN 64-LQFP, 64-QFN 64-LQFP, 64-QFN 64-LQFP, 64-QFN 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 48-SSOP, 48-QFN 48-SSOP, 48-QFN 48-SSOP, 48-QFN 64-LQFP 64-LQFP 64-LQFP 64-LQFP 80-LQFP, 100-LQFP 80-LQFP, 100-LQFP 80-LQFP, 100-LQFP 80-LQFP 80-LQFP 80-LQFP 100-LQFP 100-LQFP 100-LQFP 100-LQFP 100-LQFP 100-LQFP 100-LQFP
Price1 $2.60/1.90 $2.95/2.10 $3.40 $3.90 $3.75 $4.05 $4.45 $3.10 $3.45 $3.80 $4.50 $4.95 $5.40 $4.85 $5.45 $5.95 $4.45 $4.70 $4.90 $6.50 $7.35 $7.95 $5.75 $6.50 $7.05 9.45 9.35 10.35 $9.95
Flash/ROM-Based x4xx Family with LCD Driver and 16-bit Watchdog (VCC 1.8V - 3.6V) (Continued)

Slope Slope Slope Slope Slope Flow-meter Slope Flow-meter Slope Flow-meter 1/16 1/12 1/16 1/12 1/16 1/12 3/16 3/16 3/16 3/16 E-meter 3/16 E-meter 3/16 E-meter 8/12 8/12 8/12 12/12 2/12 12/12 2/12 12/12 2/12 8/12 8/12 8/12 12/12 2/12 12/12 2/12 12/12 2/12 12/12 2/12
resale price in U.S. dollars in quantities of 1,000. 2Includes UART, IrDA, SPI and I2C.
Preview products appear in bold blue.
CAN Selection Guide

Supply Voltage (V) 5 5 5 5 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
1Suggested
Device SN65HVD251 SN65HVD1040 SN65HVD1050 SN65LBC031 SN65HVD230 SN65HVD231 SN65HVD232 SN65HVD230Q SN65HVD231Q SN65HVD232Q SN65HVD233 SN65HVD234 SN65HVD235
Transient Pulse Description Protection (V) Standby, improved drop-in for PCA82C250/1 200 to 200 Improved drop-in replacement for TJA1040 200 to 200 Improved drop-in replacement for TJA1050 200 to 200 500Kbps 150 to 100 Standby mode 25 to 25 Sleep mode 25 to 25 Cost effective 25 to 25 Automotive temp, standby mode 25 to 25 Automotive temp, sleep mode 25 to 25 Automotive temp, cost effective 25 to 25 Standby mode, diagnostic loop-back 100 to 100 Standby mode, sleep mode 100 to 100 Standby mode, autobaud loop-back 100 to 100
ICC max (mA) 65 70 70 20 17 17 17 17 17 17 6 6 6
ESD (kV) 14 6 6 2 16 16 16 15 15 15 16 16 16
Bus Fault Protection (V) 36 27 to 40 27 to 40 5 to 20 4 to 16 4 to 16 4 to 16 7 to 16 7 to 16 7 to 16 36 36 36
Footprint PCA82C250 TJA1040 TJA1050 SN75LBC031 PCA82C250 PCA82C250 SN65HVD232 PCA82C250 PCA82C250 SN65HVD232
Temp Range (C) 40 to 125 40 to 125 40 to 125 40 to 125 40 to 85 40 to 85 40 to 85 40 to 125 40 to 125 40 to 125 40 to 125 40 to 125 40 to 125
Package(s) 8-PDIP, 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Price1 $0.90 $1.50 $1.35 $1.35 $1.30 $1.55 $1.55 $1.50 $1.50 $1.45 $1.50
resale price in U.S. dollars in quantities of 1,000. All devices have a signaling rate of 1Mbps except LBC031.
Preview products appear in bold blue.
66
Selection Tables
Interface
Signaling Rate (Mbps) 1 10 25 10 0.2 1 10 10 40 0.5 5 25 25 3 1 10 40 10 30 0.25 0.25 35 10 25 5 1 25 5 1 25 5 1 10 30 25 5 1 10 30 25 30 30 10 30 10 30 10 50 10 50 10
RS-485 Selection Guide

No. of Dr/Rx Supply (V) Enables DE, RE 3.3 DE, RE DE, RE 3 to 5 DE, RE 5 DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE 5 DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE DE, RE No No No 3.3 DE, RE DE, RE DE, RE No No No No No DE, RE DE, RE DE, RE DE, RE 5 DE, RE DE, RE 5 Separate DIR DE, Triple RE Complementary Complementary Pairwise Pairwise Complementary Complementary Pairwise Pairwise Pairwise Device SN65HVD12 SN65HVD11 SN65HVD10 SN65HVD08 SN65HVD3082E SN65HVD3085E SN65HVD3088E SN65HVD485E SN65HVD1176 SN65HVD22 SN65HVD21 SN65HVD20 SN65HVD23 SN65HVD24 SN65HVD07 SN65HVD06 SN65HVD05 SN65LBC176 SN65LBC176A SN65LBC184 SN65LBC182 SN65ALS176 SN65176B SN65HVD30 SN65HVD31 SN65HVD32 SN65HVD33 SN65HVD34 SN65HVD35 SN65HVD50 SN65HVD51 SN65HVD52 SN65LBC179 SN65LBC179A SN65HVD53 SN65HVD54 SN65HVD55 SN65LBC180 SN65LBC180A SN65ALS180 SN65LBC170 SN65LBC171 SN65LBC172 SN65LBC172A SN65LBC174A SN65LBC174A SN65LBC173 SN65LBC173A SN65LBC175 SN65LBC175A SN65175 Features 3.3V Supply Low-Speed Slew-Rate Control 3.3V Supply Low-Speed Slew-Rate Control 3.3V Supply High-Speed Signaling Wide Supply Range: 3 to 5.5V Low Power Mode, Optimized for Low-Speed Low Power Mode, Optimized for Mid-Speed Low Power Mode, Optimized for High-Speed Half Duplex Transceiver PROFIBUS Transceiver, EN 50170 20V to 25V Common Mode Operation 20V to 25V Common Mode, 5Mbps 20V to 25V Common Mode, 25Mbps Receiver Equalization, 160 Meters at 25 Mbps Receiver Equalization, 500 Meters at 3 Mbps Strong Driver Outputs Low Signal Rate Strong Driver Outputs Mid Signal Rate Strong Driver Outputs Fast Signal Rate Low Power Low Power, Fast Signaling, ESD Protection Transient Protection, IEC Air, Contact, Surge IEC ESD Protection, Air and Contact Tests Fast Signaling, Skew: 15ns Cost Effective 3.3V Supply, no Enables, 25Mbps 3.3V Supply, no Enables, 5Mbps 3.3V Supply, no Enables, 1Mbps 3.3V Supply, with Enables, 25Mbps 3.3V Supply, with Enables, 5Mbps 3.3V Supply, with Enables, 1Mbps Strong Bus Outputs, no Enables, 25Mbps Strong Bus Outputs, no Enables, 5Mbps Strong Bus Outputs, no Enables, 1Mbps Low Power, without Enable High Signaling Rate, High ESD w/o Enables Strong Bus Outputs, with Enables, 25Mbps Strong Bus Outputs, with Enables, 5Mbps Strong Bus Outputs, with Enables, 1Mbps Low Power, with Enables High Signaling Rate, High ESD with Enables High Signaling Rate, with Enables FAST-20 SCSI, Skew: 3ns FAST-20 SCSI, Skew: 3ns Low Power High Signaling Rate, High ESD Low Power High Signaling Rate, High ESD Low Power High Signaling Rate, High ESD, Low Power Low Power High Signaling Rate, High ESD, Low Power Standard ESD (kV) 15 15 15 15 15 15 15 15 10 16 16 16 16 16 16 16 16 2 12 30 15 2 2 15 15 15 15 15 15 15 15 15 2 10 15 15 15 2 10 2 12 12 2 13 2 13 2 6 2 6 2 Receiver Fail-Safe Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Open Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Open Open Open Open Open None Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Short, Open, Idle Open Open Short, Open, Idle Short, Open, Idle Short, Open, Idle Open Open Open Open Open Open Short, Open, Idle Open Short, Open, Idle None Nodes 256 256 64 256 256 256 256 64 160 256 256 64 64 256 256 256 64 32 32 128 128 32 32 64 256 256 64 256 256 64 256 256 32 32 64 256 256 32 32 32 32 32 32 32 32 32 32 32 32 32 32 Package(s) 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC, 8-MSOP 8-PDIP, 8-SOIC, 8-MSOP 8-PDIP, 8-SOIC, 8-MSOP 8-PDIP, 8-SOIC, 8-MSOP 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 8-SOIC 8-PDIP, 8-SOIC, 8-SOP 8-SOIC 8-SOIC 8-SOIC 14-SOIC 14-SOIC 14-SOIC 8-SOIC 8-SOIC 8-SOIC 8-PDIP, 8-SOIC 8-PDIP, 8-SOIC 14-SOIC 14-SOIC 14-SOIC 14-PDIP, 14-SOIC, 16-QFN 14-PDIP, 14-SOIC 14-SOIC 20-SOIC, 16-SSOP 20-SOIC, 20-SSOP 16-PDIP, 20-SOIC 16-PDIP, 16-SOIC, 20-SOIC 16-PDIP, 20-SOIC 16-PDIP, 16-SOIC, 20-SOIC 16-PDIP, 16-SOIC 16-PDIP, 16-SOIC 16-PDIP, 16-SOIC 16-PDIP, 16-SOIC 16-PDIP, 16-SOIC, 16-SOP Price1 $1.75 $1.80 $1.85 $1.90 $0.90 $0.90 $1.00 $0.70 $1.55 $1.65 $1.65 $1.65 $1.80 $1.80 $1.50 $1.55 $1.60 $0.90 $1.20 $1.30 $1.05 $1.26 $0.44 Preview Preview Preview $1.70 $1.70 $1.70 Preview Preview Preview $0.85 $1.10 $1.60 $1.60 $1.60 $1.05 $1.35 $1.71 $4.10 $4.10 $1.80 $2.40 $1.90 $2.50 $1.15 $1.50 $1.10 $1.40 $2.70
1/1 4/0 Quad-Drivers Quad-Receivers 4/0 0/4 3/3

1Suggested
Triple
3/3
3/3
Full-Duplex
Half-Duplex
Selection Tables
Interface
RS-232 Selection Guide
Device TL145406 GD75232 MAX3243 MAX202 MAX207 MAX211 MAX222 SN65C3243 SN75185 SN75C185 SN75C3234 SN75LBC187 SN75LP1185 SN75LPE185 SN75LV4737A LT1030 MC1488 SN55188 SN75188 SN75C188 SN75C198 SN75154 SN75C1154 SN75LBC241 GD75323 MAX3238 SN65C3238 SN75196 SN75C3238 SN75LP196 SN65C23243 SN752232 SN75C23243 UC5171 UC5172
1Suggested
67
Description Triple RS-232 Drivers/Receivers Multiple RS-232 Drivers and Receivers 3V to 5.5V Multichannel RS-232 Line Driver/Receiver with 15kV ESD (HBM) Protection 5V Dual RS-232 Line Driver/Receiver with 15kV ESD Protection 5V Multichannel RS-232 Line Driver/Receiver with 15kV ESD Protection 5V Multichannel RS-232 Line Driver/Receiver with 15kV ESD Protection 5V Dual RS-232 Line Driver/Receiver with 15kV ESD Protection 3V to 5.5V Multichannel RS-232 Line Driver/Receiver Multiple RS-232 Drivers and Receivers Low-Power Multiple Drivers and Receivers 3V to 5.5V Multichannel RS-232 Line Driver/Receiver Multichannel EIA-232 Driver/Receiver with Charge Pump Low-Power Multiple RS-232 Drivers and Receivers Low-Power Multiple Drivers and Receivers 3V to 5.5V Multichannel RS-232 Line Driver/Receiver Quad Low-Power Line Driver Quad Line Driver Quad Line Driver Quad Line Driver Quad Low-Power Line Driver Quad Low-Power Line Driver Quad Differential Line Receiver Quad Low-Power Drivers/Receivers Low-Power LinBiCMOSTM Multiple Drivers and Receivers Multiple RS-232 Drivers and Receivers 3V to 5.5V Multichannel RS-232 Line Driver/Receiver 3V to 5.5V Multichannel RS-232 Line Driver/Receiver Multiple RS-232 Driver and Receiver 3V to 5.5V Multichannel RS-232 Line Driver/Receiver Low-Power Multiple RS-232 Drivers and Receivers 3V to 5.5V Dual RS-232 Port Dual RS-232 Port 3V to 5.5V Dual RS-232 Port Octal Line Driver with TTL Mode Selection Octal Line Driver with Long Line Drive
Drivers per Pkg. 3 3 3 2 5 4 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 8 8
Receivers per Pkg. 3 5 5 2 3 5 2 5 5 5 5 5 5 5 5 0 0 0 0 0 0 4 4 5 3 3 3 3 3 3 10 10 10 0 0
Supply Voltage(s) (V) 12, 5 12, 5 3.3, 5 5 5 5 5 3.3 or 5 12, 5 12, 5 3.3 to 5 5 5, 12 5, 12 3 or 5 5 9 9 9 12 12 5 or 12 12, 5 5 12, 5 3.3, 5 3.3 or 5 12, 5 3.3 or 5 5, 12 3.3, 5 5 3.3, 5 9 to 15 9 to 15
ICC (mA) (max) 20 20 1 15 20 20 10 1 30 0.75 1 30 1 1 1 1 25 25 0.16 0.32 35 8 32 2 2 20 2 1 0.02 50 0.02 42 25
Footprint MC14506 GD75232 MAX3243 MAX202 MAX207 MAX211 MAX222 MAX3234 SN75185 SN75C185 MAX3243 SN75LBC187 SN75LP185 SN75LP185 MAX3243 LT1030 MC1488 MC1488 MC1488 MC1488 SN75154 MAX241 GD75323 MAX3238 MAX3238 SN75196 MAX3238 SN75LP185
Package(s) PDIP, SOIC PDIP, SOIC, SSOP, TSSOP SOIC, SSOP, TSSOP SOIC, TSSOP SOIC, SSOP SOIC, SSOP SOIC SOIC, SSOP, TSSOP PDIP, SOIC PDIP, SOIC SOIC, SSOP, TSSOP SSOP PDIP, SOIC, SSOP PDIP, SOIC, SSOP, TSSOP SOIC, SSOP, TSSOP PDIP, SOIC PDIP CDIP, CFP, LCCC PDIP, SOIC, SOP PDIP, SOIC, SOP, SSOP PDIP, SOIC PDIP, SOIC, SOP PDIP, SOIC, SOP SOIC SOIC SSOP, TSSOP SOIC, SSOP, TSSOP PDIP, SOIC SOIC, SSOP, TSSOP PDIP, SOIC, SSOP, TSSOP SSOP, TSSOP SSOP, TSSOP SSOP, TSSOP PLCC PDIP, PLCC
Price1 $0.94 $0.22 $0.99 $0.58 $1.08 $1.08 $1.26 $3.46 $0.43 $0.90 $2.02 $3.60 $1.53 $1.62 $2.61 $0.81 $0.20 $1.97 $0.18 $0.31 $2.25 $0.41 $0.76 $1.73 $0.22 $1.13 $3.24 $0.41 $2.81 $1.53 $4.32 $0.81 $3.42 $6.33 $3.25
New products appear in bold red.
68
Selection Tables
Interface
Reach 100m 100m 100m 4.5m 4.5m s100 X X X s200 X X s400 X X X X s800 X X X s1600 X X X s3200 X X
1394b Media Summary

Device UTP-5 POF/HPCF 50m GOF STP (beta) STP (DS)
Higher speeds and greater distances provide increased versatility for industrial and automated systems requiring high bandwidth real-time data.
1394 Link-Layer Controllers Selection Guide

Device TSB12C01A TSB12LV01B TSB12LV21B TSB12LV26 TSB12LV32 TSB42AA4 TSB42AB4 TSB42AC3 TSB82AA2
1Suggested
Supply Voltage Speed Max (V) (Mbps) 5 100 3.3 400 3.3 400 3.3 400 3.3 400 3.3 400 3.3 400 3.3 400 3.3 800
FIFO (kb) 2 2 4 9 4 8 8 10 11
Pin/ Package 100-LQFP 100-TQFP 176-LQFP 100-TQFP 100-LQFP 128-TQFP 128-TQFP 100-TQFP 144-LQFP
Description High-Performance 5V Link Layer with 32-Bit Host I/F, 2kb FIFOs High-Performance 1394 3.3V Link Layer for Telecom, Embedded & Industrial App., 32-Bit I/F, 2kb FIFO PCILynx - PCI to 1394 3.3V Link Layer with 32-Bit PCI I/F, 4kb FIFOs OHCI-Lynx PCI-Based IEEE 1394 Host Controller General-Purpose Link Layer Controller (GP2Lynx) 1394 Link Layer Controller with DTCP Content Protection for Consumer Electronics Applications 1394 Link Layer Controller for Consumer Electronics Applications No Content Protection High-Performance Link Layer with 32-Bit I/F. May Be Cycle Master; Has 10kb FIFO and JTAG Support. PHY-Link Timing Compliant with 1394a-2000 for Industrial and Bridge Applications. High-Performance 1394b 3.3V OHCI 1.1+ Compliant Link Layer Controller
Price1 $11.75 $8.90 $9.60 $3.95 $5.15 $9.20 $10.95 $6.50 $7.80
1394 Integrated Devices Selection Guide

Device TSB43AA22 TSB43AA82A TSB43AB21A TSB43AB22A TSB43AB23 TSB43CA42 TSB43CA43A TSB43CB43A
1Suggested
Supply Voltage (V) 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
Speed Max (Mbps) 400 400 400 400 400 400 400 400
FIFO (kb) 8 4.7 9 9 9 16 16.5 16.5
Package(s) 128-TQFP 144-LQFP 128-TQFP 128-TQFP 144-LQFP, 128-TQFP 176-LQFP 176-LQFP 176-LQFP
Description 1394a Serial Layer Controller +400Mbps, 2-Port Physical Layer 2-Port High Performance Integrated Physical and Link Layer Chip for PC Peripherals OHCI 1.1, 1394a Link Layer Controller Integrated with 1394a, 400Mbps, 1-Port Physical Layer (PHY) OHCI 1.1, 1394a Link Layer Controller Integrated with 1394a, 400Mbps, 2-Port Physical Layer (PHY) OHCI 1.1, 1394a Link Layer Controller Integrated with a 1394a, 400Mbps, 3-Port Physical Layer (PHY) iceLynx Micro 2-port IEEE 1394a-2000 CES iceLynx Micro-5C with Streaming Audio and Content Protection iceLynx Micro with Streaming Audio
Price1 $7.20 $8.30 $4.35 $4.55 $4.90 $10.60 $12.60 $11.40
1394 Physical-Layer Controllers Selection Guide

Device TSB14AA1A TSB14C01A TSB17BA1 TSB41AB1 TSB41AB2 TSB41AB3A TSB41BA3A TSB41LV04A TSB41LV06A TSB81BA3
1Suggested
Supply Voltage (V) 3.3 5 3.3 3.3 3.3 3.3 3.3 3.3 3.3 1.8, 3.3
Speed Max (Mbps) 100 100 100 400 400 400 400 400 400 800
FIFO (kb) 1 1 1 1 2 3 3 4 6 3
Package(s) 48-TQFP 64-LQFP 24-TSSOP 48-HTQFP, 64-HTQFP 64-HTQFP 80-HTQFP 80-HTQFP 80-HTQFP 100-HTQFP 80-HTQFP
Description IEEE 1394-1995, 3.3V, 1-Port, 50/100Mbps, Backplane PHY IEEE 1394-1995, 5V, 1-Port, 50/100Mbps Backplane Physical Layer Controller 1394b-2002 Compliant Cat5 Cable Transceiver for up to 100 Meters IEEE 1394a One-Port Cable Transceiver/Arbiter IEEE 1394a Two-Port Cable Transceiver/Arbiter IEEE 1394a Three-Port Cable Transceiver/Arbiter 1394b-2002 3-Port Physical Layer Device IEEE 1394a Four-Port Cable Transceiver/Arbiter IEEE 1394a Six-Port Cable Transceiver/Arbiter IEEE P1394b s800 Three-Port Cable Transceiver/Arbiter
Price1 $5.90 $5.45 $2.50 $1.50 $1.85 $3.00 $6.50 $6.50 $6.40 $7.80
Selection Tables
Interface
UARTs Selection Guide
FIFOs Device Channels (Bytes) TL16C450 1 0 TL16C451 1 0 TL16C452 2 0 TL16C550C 1 16 TL16C550D 1 16 TL16C552/552A 2 16 TL16C554/554A 4 16 TL16C750 1 16 or 64 TL16C752B 2 64 TL16C754B 4 64 TL16PC564B/BLV 1 64 TL16PIR552 2 16 TIR1000 0 None TUSB3410 0 None
1Suggested
69
Baud Rate max (Mbps) 0.256 0.256 0.256 1 1 1 1 1 3 5V-3, 3.3V-2 1 1 0.115 0.922
Voltage (V) Package(s) 5 40-PDIP, 44-PLCC 5 68-PLCC 5 68-PLCC 5, 3.3 48-LQFP, 40-PDIP, 44-PLCC, 48-TQFP 5, 3.3, 2.5 48-LQFP, 48-TQFP, 32-QFN 5 68-PLCC 5 80-LQFP, 68-PLCC 5, 3.3 64-LQFP, 44-PLCC 3.3 48-LQFP 5, 3.3 80-LQFP, 68-PLCC 5, 3.3 100-BGA, 100-LQFP 5 80-QFP 2.7 to 5.5 8-OP, 8-TSSOP 3.3 32-LQFP
Description Single UART without FIFO Single UART with Parallel Port and without FIFO Dual UART with Parallel Port and without FIFO Single UART with 16-Byte FIFOs and Auto Flow Control Single UART with 16-Byte FIFOs and Auto Flow Control Dual UART with 16-Byte FIFOs and Parallel Port Quad UART with 16-Byte FIFOs Single UART with 64-Byte FIFOs, Auto Flow Control, Low-Power Modes Dual UART with 64-Byte FIFO Quad UART with 64-Byte FIFO Single UART with 64-Byte FIFOs, PCMCIA Interface Dual UART with 16-Byte FIFOs, Selectable IR and 1284 Modes Standalone IrDA Encoder and Decoder RS232/IrDA Serial-to-USB Converter
Price1 $1.50 $2.50 $2.55 $1.75 $1.75 $3.90 /$3.85 $6.05/$6.00 $3.70 $3.10 $8.35 $5.90/$3.10 $6.10 $1.15 $2.50
USB Hub Controllers Selection Guide

Device TUSB2036 TUSB2046B TUSB2077A TUSB2136 TUSB5052
1Suggested
Speed Full (1.1) Full (1.1) Full (1.1) Full (1.1) Full (1.1)
Ports 2 4 7 2 5
I2C No No No Yes Yes
Voltage (V) 3.3 3.3 3.3 3.3 3.3
Package 32-LQFP 32-LQFP 48-LQFP 64-LQFP 100-LQFP
Description 2/3-Port Hub for USB with Optional Serial EEPROM Interface 4-Port Hub for USB with Optional Serial EEPROM Interface Supporting Windows 95/DOS Mode 7-Port USB Hub with Optional Serial EEPROM Interface 2-Port Hub with Integrated General-Purpose Function Controller 5-Port Hub with Integrated Bridge to Two Serial Ports
Price1 $1.15 $1.20 $1.95 $3.25 $5.10
USB Peripherals Selection Guide

Device TUSB3210 TUSB3410 TUSB6250
1Suggested
Speed Full Full Full, high
Voltage (V) 3.3 3.3 3.3
Remote Wakeup Yes Yes Yes
Package 64-LQFP 32-LQFP 80-TQFP
Description USB Full-Speed General-Purpose Device Controller RS232/IrDA Serial-to-USB Converter USB 2.0 High-Speed ATA/ATAPI Bridge Solution
Price1 $2.50 $2.25 $2.80
PCI Bridges Selection Guide

Device HPC3130 HPC3130A PCI2040 PCI2060 PCI2050B PCI2250
1Suggested
Intel Compatible Part Number
Speed (MHz) 33 66
Expansion Interface (Bits) 32 64
MicroStar BGA Voltage(s) Packaging (V) No 3.3 No 3.3 Friendly Yes 3.3, 5 Friendly Friendly Friendly Yes Yes No 3.3, 5 3.3, 5 3.3, 5
Hot Swap
Package(s) 128-LQFP, 120-QFP 128-LQFP, 144-LQFP, 120-QFP 144-BGA, 144-LQFP 257-BGA 257-BGA, 208-LQFP, 208-QFP 176-LQFP, 160-QFP
21150bc 21152ab
66 66 33
32 32 32
Description Hot Plug Controller Hot Plug Controller PCI-to-DSP Bridge Controller, Compliant to Compact PCI Hot Swap Specification 1.0 Asynchronous 32-Bit, 66MHz PCI-to-PCI Bridge PCI-to-PCI Bridge 32-Bit, 33MHz PCI-to-PCI Bridge, Compact PCI Hot-Swap Friendly, 4-Master
Price1 $10.95 $10.95 $10.55 $9.50 $9.50 $6.10
70
Selection Tables
Interface/Power and Control
Voltage (V) 3.3 3.3 1.8, 3.3, 5 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 D3 Cold Wake Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Integrated 1394 No No No Yes Yes No No Yes Yes Yes Yes Yes Integrated ZV No No No No No No No No No No No No
PCI CardBus Controllers Selection Guide

Device PCI1510 PCI1520 PCI1620 PCI4510 PCI4520 PCI6420 PCI6620 PCI7410 PCI7420 PCI7510 PCI7610 PCI7620
1Suggested
Package(s) 144-BGA, 144-LQFP 209-BGA, 208-LQFP 209-BGA, 208-LQFP 209-BGA, 208-LQFP 257-BGA 288-BGA 288-BGA 209-BGA, 208-LQFP 288-BGA 209-BGA, 208-LQFP 209-BGA, 208-LQFP 288-BGA
Description Single Slot PC CardBus Controller PC Card Controller PC Card, Flash Media, and Smart Card Controller PC Card and Integrated 1394a-2000 OHCI Two-Port-PHY/Link-Layer Controller Two Slot PC Card and Integrated 1394a-2000 OHCI Two-Port-PHY/Link-Layer Controller Integrated 2-Slot PC Card and Dedicated Flash Media Controller Integrated 2-Slot PC Card with Smart Card and Dedicated Flash Media Controller PC Card, Flash Media, Integrated 1394a-2000 OHCI 2-Port PHY/Link-Layer Controller Integrated 2-Slot PC Card, Dedicated Flash Media Socket & 1394a-2000 OHCI 2-Port-PHY/Link-Layer Controller Integrated PC Card, Smart Card and 1394 Controller Integrated PC Card, Smart Card, Flash Media ,1394a-2000 OHCI 2-Port-PHY/ Link-Layer Controller Integrated 2-Slot PC Card with Smart C, Flash Media, 1394a-2000 OHCI 2-Port-PHY/Link-Layer Controller
Price1 $3.60 $4.35 $7.35 $8.00 $9.15 $9.50 $10.50 $11.00 $12.00 $11.00 $12.00 $13.00
Power+ Logic: 8-Bit Devices with Integrated Control Logic and FETs (TC = 40C to +125C)
Device TPIC6259 TPIC6273 TPIC6595 TPIC6596 TPIC6A2591 TPIC6A5951 TPIC6A5961 TPIC6B2592 TPIC6B2732 TPIC6B5952 TPIC6B5962 TPIC6C5952 TPIC6C5962
1Short-circuit
Description Addressable Latch D-Type Latch Shift Register Shift Register Addressable Latch Shift Register Shift Register Addressable Latch D-Type Latch Shift Register Shift Register Shift Register Shift Register
VDS max (V) 45 45 45 45 50 50 50 50 50 50 50 33 33
ICC typ (A) 15 15 15 15 500 500 500 20 20 20 20 20 20
IO (A) 0.25 0.25 0.25 0.25 0.35 0.35 0.35 0.15 0.15 0.15 0.15 0.1 0.1
IPEAK (A) 0.75 0.75 0.75 0.75 1.1 1.1 1.1 0.5 0.5 0.5 0.5 0.25 0.25
rDS(on) typ () 1.3 1.3 1.3 1.3 1 1 1 5 5 5 5 7 7
EAS max (mJ) 75 75 75 75 75 75 75 30 30 30 30 30 30
tPLH typ (ns) 625 625 650 650 125 125 125 150 150 150 150 80 80
ESD max (kV) 3 3 3 3 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Package(s) 20/SOP (DW), DIP (N) 20/SOP (DW), DIP (N) 20/SOP (DW), DIP (N) 20/SOP (DW), DIP (N) 20/DIP (NE), 24/SOP (DW) 20/DIP (NE), 24/SOP (DW) 20/DIP (NE), 24/SOP (DW) 20/SOP (DW), DIP (N) 20/SOP (DW), DIP (N) 20/SOP (DW), DIP (N) 20/SOP (DW), DIP (N) 16/SOP (D), DIP (N) 16/SOP (D), DIP (N)
and current-limit protection. 2Current-limit capability.
PWM Power Supply Control (Single Output) Selection Guide

Typical Power Max Level Practical Device (W) Frequency Peak Current Mode Controllers UCC38C40 10 to 250 1MHz UCC38C41 10 to 250 1MHz UCC38C42 10 to 250 1MHz UCC38C43 10 to 250 1MHz UCC38C44 10 to 250 1MHz UCC38C45 10 to 250 1MHz
1Suggested
StartUp Current 50A 50A 50A 50A 50A 50A
Operating Current 2.3mA 2.3mA 2.3mA 2.3mA 2.3mA 2.3mA
Supply Voltage (V) 6.6 to 20 6.6 to 20 9 to 20 7.6 to 20 9 to 20 7.6 to 20
UVLO: On/Off (V) 7.0/6.6 7.0/6.6 14.5/9 8.4/7.6 14.5/9 8.4/7.6
VREF (V) 5 5 5 5 5 5
VREF Tol. (%) 2 2 2 2 2 2
Max Duty Cycle (%) 100 50 100 100 50 50
E/A Yes Yes Yes Yes Yes Yes
Voltage FeedForward Yes Yes Yes Yes Yes Yes
Internal Drive (Sink/Source) (A) 1/1 1/1 1/1 1/1 1/1 1/1
Package(s) SOIC-8, PDIP-8, MSOP-8 SOIC-8, PDIP-8, MSOP-8 SOIC-8, PDIP-8, MSOP-8 SOIC-8, PDIP-8, MSOP-8 SOIC-8, PDIP-8, MSOP-8 SOIC-8, PDIP-8, MSOP-8
Price1 $0.95 $0.95 $0.95 $0.95 $0.95 $0.95
Selection Tables
Power Management
Switching DC/DC Controllers Selection Guide
VO VO VREF VIN (V) (V) Tol Device (V) (max) (min) (%) General-Purpose DC/DC Controllers TPS40007 2.25 to 5.5 4 0.7 1.5 TPS40021 2.25 to 5.5 4 0.7 1 TPS40057 TPS40061 TPS40071 TPS51020 TPS51116 TPS6420x UC3572
1Suggested 3OCP
71
Driver Output Current Current (A) (A)2 1 2 1 1 1 2 0.8 0.5 15 25 20 10 20 20 10 3 5
Protection3 Multiple Outputs No No No No No 2 1+2 No No Frequency (kHz) 300 Program up to 1MHz Program up to 1MHz Program up to 1MHz Program up to 1MHz 450 Up to 500 300 OPC OVP UVLO PG

Application4 Light Source Source/ Prebias Load Only Sink Operation PGD DDR Efficient

Price1 $0.99 $1.15 $1.35 $1.40 $1.35 $3.15 $1.20 $0.55 $1.05
8 to 40 10 to 55 4.25 to 28 4.25 to 28 3 to 28 1.8 to 6.5 4.75 to 30
35 40 23 24 3.4 6.5 0
0.7 0.7 0.7 0.85 1.5 1.2 48
1 1 1 1 1 2
Comments
DC/DC Controllers with Light Load Efficiency Other Topology DC/DC Controllers

Sync Switcher w/3A Tracking LDO

Comments
Simple, Hysteretic High-Efficiency Controller in SOT-23 Simple Inverting PWM Controller
resale price in U.S. dollars in quantities of 1,000. 2Current levels of this magnitude can be supported. = over-current protection, OVP= over-voltage protection, UVLO = under-voltage lockout, PG = power good. 4The controller of choice for most applications will be the source/sink version, which has two-quadrant operation and will source or sink output current. PGD = Predictive Gate DriveTM technology included; DDR = supports DDR memory.
DC/DC Converter (Integrated FETs) Selection Guide

Device Buck (Step Down) TPS62200/1/2/3/4/5/6 TPS62000/1/2/3/4/5/6/7/8 TPS62051/2/3/4/5 TPS62040/2/3/4/6 TPS62110/1/2 TPS54310/1/2/3/4/5/6 TPS54610/1/2/3/4/5/6 TPS54810 TPS54910 TPS799xx Inverter TPS6755 TL497A
1Suggested
VIN (V) 2.5 to 6.0 2.0 to 5.5 2.7 to 10 2.5 to 6.0 3.1 to 17 3.0 to 6.0 3.0 to 6.0 4.0 to 6.0 3.0 to 4.0 1.2 to 3.3 2.7 to 9.0 4.5 to 12
Output Current (A) 0.3 0.6 0.8 1.2 1.5 3 6 8 9 0.2 0.2 0.5
VOUT (V) Adj.,1.5, 1.8, 3.3, 1.6, 2.5, 2.6 Adj., 0.9, 1.0,1.2, 1.5, 1.8, 2.5, 3.3, 1.9 Adj., 1.5, 1.8, 3.3 Adj. 1.5, 1.6, 1.8, 3.3 Adj., 3.3, 5 Adj., 0.9, 1.2, 1.5, 1.8, 2.5, 3.3 Adj., 0.9, 1.2, 1.5, 1.8, 2.5, 3.3 Adj. to 0.9 Adj. to 0.9 Adj tp 6.5 Adj. from -1.25 to - 9.3 Adj. from -1.2 to -25
Package(s) SOT 23-5 MSOP-10 MSOP-10 MSOP-10, QFN-10 QFN-16 HTSSOP-20 HTSSOP-28 HTSSOP-28 HTSSOP-28 SOT23-5 SOIC-8 TSSOP-14
Price1 $1.35 $1.60 $1.85 $2.20 $2.50 $2.95 $3.90 $4.20 $4.40 0.35 $1.25 $0.86
72
Selection Tables
Power Management
Min VIN Max VIN Accuracy (%) SC70 SOT23 MSOP SO8 SOT223 TO220 QFN DDPAK Output Options IO (mA) 10 50 50 100 100 150 150 250 250 250 400 500 500 750 1000 1500 3000 5000 200 500 VDO @ IO (mV) 105 415 50 60 38 30 75 40 145 150 75 105 115 260 170 390 400 350 280 150 Iq (A) 1.2 3.2 80 400 185 400 90 400 172 400 300 265 500 85 75 310 400 8mA 130 200 Packages
Low Dropout Regulators (LDOs) Selection Guide
Device TPS797xx TPS715xx/A TPS722xx REG101 TPS792xx TPS731xx TPS771xx TPS732xx TPS794xx REG102 TPS736xx TPS795xx REG103 TPS777xx TPS725xx TPS786xx UCCx83-x UCx85-x TPS723xx UCC384-x
1Suggested
Voltage (V) 1.8, 3.0, 3.3 2.5, 3.0, 3.3, 5 1.5, 1.6, 1.8 2.5, 2.8, 2.85, 3.0, 3.3, 5 2.5, 2.8, 3.0 1.5, 1.8, 2.5, 3.0, 3.3, 5.0, EEProm4 1.5, 1.8, 2.7, 2.8, 3.3, 5 1.5, 1.8, 2.5, 3.0 3.3, 5.0, EEProm4 1.8, 2.5, 2.8, 3.0, 3.3 2.5, 2.8, 2.85, 3.0, 3.3, 5 1.5, 1.8, 2.5, 3.0 3.3, EEProm4 1.6, 1.8, 2.5, 3.0, 3.3 2.5, 2.7, 3.0, 3.3, 5 1.5, 1.8, 2.5, 3.3 1.5, 1.6, 1.8, 2.5 1.8, 2.5, 2.8, 3.0, 3.3 3.3, 5 1.5, 2.1, 2.5 2.5 12.0, 5.0
Adj. 1.2 15 1.2 2.5 2.5 5.5 1.2 5.5 1.2 5.5 1.5 5.5 1.2 5.5 1.2 5.5 2.5 5.5 1.2 5.5 1.2 5.5 2.5 5.5 1.5 5.5 1.2 5.5 1.2 5.5 1.2 8.5 1.2 6
Features2 PG
CO3 0.47F C 0.47F C 0.1F C No Cap 1F C No Cap 10F C No Cap 2.2F C No Cap No Cap 2.2F C No Cap 10F T No Cap 1F C 22F T 100F T 2.2F C 4.7F T
Comments MSP430; Lowest Iq VIN Up to 24V Low Noise, VIN Down to 1.8V Low Noise RF Low Noise, High PSRR Reverse Leakage Protection Low Noise Reverse Leakage Protection RF Low Noise, High PSRR Capacitor Free, DMOS Reverse Leakage Protection RF Low Noise, High PSRR Capacitor Free, DMOS Fast Transient Response VIN Down to 1.8V, Low Noise RF Low Noise, High PSRR Reverse Leakage Protection Fast LDO with Reverse Leak Low Noise, High PSRR Duty Cycled Short
Price1 $0.34 $0.34 $0.41 $0.95 $0.40 $0.45 $0.60 $0.65 $0.65 $1.05 $0.85 $1.05 $2.50 $1.05 $1.10 $1.35 $2.57 $3.00 $1.05 $1.86
Positive Voltage, Single-Output Devices

1.8 2.5 1.8 2.6 2.7 1.7 5.5 24 5.5 10 5.5 5.5 4 4 3 1.5 2 1

/EN, BP EN, BP EN EN, BP /EN, SVS EN, BP EN, BP EN, BP EN, BP EN, BP EN, PG /EN,SVS EN, SVS EN, BP EN
2.7 10 2 1.7 5.5 1 2.7 5.5 2 1.8 10 2 1.7 5.5 1 2.7 2.1 2.7 1.8 2.7 1.8 1.7 5.5 15 10 6 5.5 9 7.5 3 2 2 2 3 2.5 1
Negative Voltage, Single-Output Devices

1.2 to 9 10 2.7 2 1.25 to 1 15 3.5 3 EN, BP /EN
resale price in U.S. dollars in quantities of 1,000. 2PG = Power Good; EN = Active High Enable; /EN = Active Low Enable; SVS Supply Voltage Supervisor; BP = Bypass Pin for noise reduction capacitor. 3C = Ceramic; T = Tantalum; No Cap = Capacitor Free LDO. 4TIs TPS73xxx series of LDOs are EEProm programmable at the factory, allowing production of custom fixed voltages (as well as custom current limits), minimum quantities apply. Please contact TI.
Dual-Output LDOs Selection Guide

Output Options VDO1 VDO2 IO1 IO2 at IO1 at IO2 (mA) (mA) (mV) (mV) 250 150 83 250 150 500 250 500 250 83 170 170 230 2500 2800 IQ at IO (A) 95 95 95 95 170 1000 1000 185 185 Features Low Min Max Noise VIN VIN 2.7 5.5

Device TPS707xx TPS708xx TPS701xx TPS702xx
TPS767D3xx 1000 1000 TPPM0110 TPPM0111 TPS703xx TPS704xx

1Suggested
1500 300 1000 1500 300 1000 2000 1000 160 2000 1000 160
Voltage Accuracy PWP Min Max (V) Adj. (%) Package VO VO /EN PG SVS Seq 3.3/2.5, 3.3/1.8, 2 1.2 5 3.3/1.5, 3.3/1.2 3.3/2.5, 3.3/1.8, 2 1.2 5 3.3/1.5, 3.3/1.2 3.3/2.5, 3.3/1.8, 2 1.2 5 3.3/1.5, 3.3/1.2 3.3/2.5, 3.3/1.8, 2 1.2 5 3.3/1.5, 3.3/1.2 3.3/2.5 2 1.2 5 3.3/1.8 3.3/1.8 2 1.8 3.3 3.3/1.5 2 1.5 3.3 3.3/2.5, 3.3/1.8, 2 1.2 5 3.3/1.5, 3.3/1.2 3.3/2.5, 3.3/1.8, 2 1.2 5 3.3/1.5, 3.3/1.2
CO2 10F T 10F T 10F T 10F T 10F T 100F T 100F T 22F T 22F T
2.7 2.7 2.7 2.7 4.7 4.7 2.7 2.7
5.5 5.5 5.5 10 5.3 5.3 5.5 5.5
Description Dual-Output LDO with Sequencing Dual-Output LDO with Independent Enable Dual-Output LDO with Sequencing Dual-Output LDO with Independent Enable Dual-Output FAST LDO with Integrated SVS Outputs Track within 2V Outputs Track within 2V Dual-Output LDO with Sequencing Dual-Output LDO with Independent Enable
Price1 $1.20 $1.20 $1.50 $1.50 $2.00 $1.60 $1.60 $2.35 $2.35
resale price in U.S. dollars in quantities of 1,000. 2T = Tanalum.
Selection Tables
Power Management
Plug-In Power Solutions Selection Guide
Device PTH03010W PTH03020W PTH03030W PTH03050W PTH03060W PTH04000W PTH04040W PTH05010W PTH05020W PTH05030W PTH05050W PTH05060W PTH05T210W PTH08080W PTH08T210W PTH08T220W PTH08T230W PTH08T240W PTH12010L/W PTH12020L/W PTH12030L/W PTH12040W PTH12050L/W PTH12060L/W PTN04050C PTN78000W/H PTN78060W/H PTN78020W/H PT6910 PTN04050A PTN78000A PTN78060A PTN78020A PT5060 PT6980 DCP01_B DCP02 DCR01 DCR02 DCV01 PT4140 PT4240 PTB78520W PTB78560A/B/C PTMA DCP01_DB DCP02_D DCV01_D
1Suggested
73
Input Bus Voltage (V) 3.3 3.3 3.3 3.3 3.3 3.3/5 3.3/5 5 5 5 5 5 5 5/12 12 5/12 5/12 5/12 12 12 12 12 12 12 3.3/5 VO + 2 to 36 VO + 2 to 36 VO + 2 to 36 3.3/5 3.3/5 7 to 29 9 to 29 9 to 29 5 12 5, 24 5, 12, 24 5, 12, 24 12, 24 5, 24 24 24 18 to 60 18 to 60 48 5, 15, 24 5, 15, 24 5, 15, 24
Description 3.3V Input 15A POL with Auto-Track Sequencing 3.3V Input 22A POL with Auto-Track Sequencing 3.3V Input 30A POL with Auto-Track Sequencing 3.3V Input 6A POL with Auto-Track Sequencing 3.3V Input 10A POL with Auto-Track Sequencing 3V to 5.5V Input 3A POL with Auto-Track Sequencing 3V to 5.5V Input 60A POL with Auto-Track Sequencing 5V Input 15A POL with Auto-Track Sequencing 5V Input 22A POL with Auto-Track Sequencing 5V Input 30A POL with Auto-Track Sequencing 5V Input 6A POL with Auto-Track Sequencing 5V Input 10A POL with Auto-Track Sequencing 5V Input, 30A T2 2nd Gen PTH POL with TurboTrans 5V to 18V Input, 2.25A POL 5.5 to 14V Input, 30A T2 2nd Gen PTH POL with TurboTrans 4.5 to 14V Input, 16A T2 2nd Gen PTH POL with TurboTrans 4.5 to 14V Input, 6A T2 2nd Gen PTH POL with TurboTrans 4.5 to 14V Input, 10A T2 2nd Gen PTH POL with TurboTrans 12V Input 12A POL with Auto-Track Sequencing 12V Input 18A POL with Auto-Track Sequencing 12V Input 26A POL with Auto-Track Sequencing 12V Input 50A POL with Auto-Track Sequencing 12V Input 6A POL with Auto-Track Sequencing 12V Input 10A POL with Auto-Track Sequencing 3V/5V Input, 12W Output Step-Up (Boost) ISR Wide-Input, Wide-Output 1.5A Positive Step-Down ISR Wide-Input, Wide-Output 3A Positive Step-Down ISR Wide-Input, Wide-Output 6A Positive Step-Down ISR 3.3V/5V Input 12W Adjustable Plus-to-Minus Voltage Converter 3V to 5V Input, 6W Positive to Negative (Buck-Boost) ISR Wide-Input, Wide-Output 1.5A Positive to Negative (Buck-Boost) ISR Wide-Input, Wide-Output 15W Positive to Negative (Buck-Boost) ISR Wide-Input, Wide-Output 25W Positive to Negative (Buck-Boost) ISR 5 to 12/15VOUT 9W Dual Output Adjustable ISR 10A 12V Input Adjustable Dual Output ISR 1W Unregulated Isolated DC/DC Converter with Sychronization 2W Unregulated Isolated DC/DC Converter with Sychronization 1W Regulated Isolated DC/DC Converter with Sychronization 2W Regulated Isolated DC/DC Converter with Sychronization 1W Unregulated Isolated DC/DC Converter with 1500V Isolation 20W, 24V Input Isolated DC/DC Converter 10W, 24V Input Isolated DC/DC Converter 20A, 18V to 60V Input Isolated POL Converter with Track I/O 30W, 18V to 60V Input Isolated POL Converter with Track I/O 10W, 48V Input Isolated DC/DC Converter - Industry Std Footprint 1W Unregulated Dual Isolated DC/DC Converter with Sychronization 2W Unregulated Dual Isolated DC/DC Converter with Sychronization 1W Unregulated Dual Isolated DC/DC Converter with 1500V Isolation
POUT or IOUT 15A 22A 30A 6A 10A 3A 60A 15A 22A 30A 6A 10A 30A 2.25A 30A 16A 6A 10A 12A 18A 26A 50A 6A 10A 12W 1.5A 3A 6A 12W 6W 1.5A 15W 25W 9W 10A 1W 2W 1W 2W 1W 20W 10W 65W 30W 10W 1W 2W 1W
Isolated Outputs No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
VO Range (V) 0.8 to 2.5 0.8 to 2.5 0.8 to 2.5 0.8 to 2.5 0.7 to 2.5 0.9 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.7 to 3.6 0.9 to 5.5 0.7 to 3.6 0.7 to 5.5 0.7 to 5.5 0.7 to 5.5 0.8 to 1.8/1.2 to 5.5 0.8 to 1.8/1.2 to 5.5 0.8 to 1.8/1.2 to 5.5 0.8 to 5.5 0.8 to 1.8/1.2 to 5.5 0.8 to 1.8/1.2 to 5.5 5 to 15 2.5 to 12/12 to 22 2.5 to 12/12 to 22 2.5 to 12/12 to 22 1.2 to 6.5 3.3 to 15 3 to 15 3 to 15 3 to 15 8 to 20 1.3 to 3.6 5, 12, 15 3.3, 5, 7, 9, 12, 15 3.3, 5 5 5, 12, 15 1.7 to 16.5 1.5 to 12 1.8 to 3.6 3.3, 5, 12 3.3, 5, 12 5, 12, 15 5, 12, 15 5, 12, 15
VO Adjustable Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No No Yes Yes Yes Yes Yes No No No
Price1 $11.60 $18.15 $25.00 $6.90 $9.80 $4.50 $35.00 $11.60 $18.15 $25.00 $6.90 $9.80 $18.00 $4.28 $18.00 $12.60 $7.90 $10.80 $11.60 $18.15 $25.00 $35.00 $6.90 $9.80 $8.00 $8.00 $11.00 $15.00 $26.25 $8.00 $8.00 $11.00 $15.00 $10.80 $27.40 $5.35 $6.95 $5.95 $7.30 $8.50 $32.45 $26.90 $62.00 $25.00 $20.00 $5.90 $6.95 $9.05
Non-Isolated Single Positive Output
Non-Isolated Single Negative Output
Non-Isolated Multiple Output
Isolated Single Output
Isolated Multiple Output
74
Standard Linear and Logic
Standard Linear and Logic Selection Guide

Amplifiers and Comparators
LM224K LM248 LM258 LM2902K LM2904 LM318 LM324K LMV321 LMV324 LMV341 LMV342 (Preview) LMV344 (Preview) LMV358 LMV710 LMV711 LMV821 LMV822 LMV824 LMV931 LMV932 LMV934 (Preview) LMV981 LMV982 LT1013DI LT1014DI MC33078 OP27 TL031I TL032I TL034I TL051I TL052I TL054I TL5580I TSM104W TSM104WA
I2C Interface
PCA8550 PCA9306 PCF8574 PCF8574A PCF8575 PCF8575C
RS-232 Interface
MAX202 MAX207 MAX208 MAX211 MAX211E MAX222 MAX232 MAX3221 MAX3222 MAX3223 MAX3232 MAX3238 MAX3238-Q1 MAX3243 MAX3243E SN65C1154 SN65C1406 SN65C23243 SN65C3221 SN65C3222 SN65C3223 SN65C3232 SN65C3238 SN65C3243
Translation
SN74ALVC164245 SN74AVC16T245 SN74AVC1T45 SN74AVC20T245 SN74AVC24T245 SN74AVC2T45 SN74AVC32T245 SN74AVC4T245 SN74AVC8T245 SN74AVCA164245 SN74AVCAH164245 SN74AVCB164245 SN74AVCB324245 SN74AVCBH164245 SN74AVCBH324245 SN74AVCH20T245 SN74AVCH32T245 SN74AVCH8T245 SN74LVC1T45 SN74LVC2T45 SN74LVC4245A SN74LVCC3245A SN74LVCC4245A
Power Management
LM237 LM337 LM4040 LM4041 LP2981 LP2985 MC33063A MC79L12 MC79L12A MC79L15 MC79L15A TL2842 TL2843 TL2844 TL2845 TL431B TL432B TL497A TL594 TL750L10 TL750L12 TL751L10 TL751L12 TL780-12 TL780-15 TLV1117 TLVH431B TLVH432B UA723 UA7810 UA7812 UA7815 UA7824 UA78L09A UA78L10A UA78L12A UA78M09 UA78M10 UA78M12
RS-485 Interface
SN65175 SN65176B SN65ALS176 SN65ALS180
Analog Switches
MAX4594 MAX4595 MAX4596 MAX4597 TS5A23166 TS5A3159
Application Reports
To access any of the following application reports, type the URL www-s.ti.com/sc/techlit/litnumber and replace lit number with the number in the Lit Number column. Title
Instrumentation Amplifiers
75
Title
Lit Number
sbaa118 sbaa073a sbaa096 sbaa094 sbaa083 sloa056 sbaa050 sbaa008 sloa052 slaa108a sbaa092a sbaa073a sbaa100 slla067a slla098 sloa101 slla109 slla127 slla112a slla169 slla167 slla166 slla143 slit110 slia082 slpa004a
Lit Number
sboa024 sboa003 sboa014 sboa001 sboa016 sboa038 sboa012 sboa004 sboa064 sboa097 sboa096 sboa052 sboa005 sboa009 sboa008 sboa037 sloa056 sloa035b sboa068 sloa033a sboa014 sboa034 sboa043 sboa019 sboa038 sboa027 sboa018 sloa052 sloa034 slva050 slaa034 szza045 sboa053 sbva004 sbfa007 sboa017 sbva003 sboa023 sboa025 sbfa013 sbfa012 sboa035 slaa151 sloa092 spra873
Programmable-Gain Instrumentation Amplifiers AC Coupling Instrumentation and Difference Amplifiers Boost Instrument Amp CMR with Common-Mode Driven Supplies Increasing INA117 Differential Input Range Input Filtering the INA117 200V Difference Amplifier Level Shifting Signals with Differential Amplifiers
Isolation Analog Amplifiers
LVDS Outputs on the ADS527x Measuring Temperature with the ADS1216, ADS1217, or ADS1218 (Rev. A) Interfacing the ADS1202 Modltr w/ a Pulse Transformer in Galvanically Iso. Combining ADS1202 w/ FPGA Digital Filter for Current Meas. in Motor Cntrl App ADS1240/41 App-Note: Accessing the Onboard Temp Diode in the ADS1240/41 Pressure Transducer to ADC Application Complete Temp Data Acquisition System From a Single +5V Supply Voltage Ref. Scaling Techniques Increase Converter and Resolution Accuracy Thermistor Temperature Transducer to ADC Application
Digital-to-Analog Converters
Simple Output Filter Eliminates Amp Output Ripple, Keeps Full Bandwidth Single-Supply Operation of Isolation Amplifiers Isolation Amps Hike Accuracy and Reliability
Operational Amplifiers
SPI-Based Data Acquisition/Monitor Using the TLC2551 Serial ADC (Rev. A) MSC1210: Incorp. the MSC1210 into Electronic Weight Scale Systems (Rev. A) Measuring Temperature with the ADS1216, ADS1217, or ADS1218 (Rev. A) Using the MSC121x as a High-Precision Intelligent Temperature Sensor
Interface
High-Voltage Signal Conditioning for Low Voltage ADCs High-Voltage Signal Conditioning for Differential ADCs Make a 10V to +10V Adjustable Precision Voltage Source 200V Difference Amplifier with Common-Mode Voltage Monitor Boost Amplifier Output Swing with Simple Modification Extending the Common-Mode Range of Difference Amplifiers Simple Circuit Delivers 38Vp-p at 5A from 28V Unipolar Supply Pressure Transducer to ADC Application Amplifiers & Bits: Introduction to Selecting Amps for Data Converters (Rev. B) Precision Absolute Value Circuits Signal Conditioning Piezoelectric Sensors (Rev. A) Boost Instrument Amp CMR with Common-Mode Driven Supplies Comparison of Noise Perf. of FET Transimpedence Amp/Switched Integrator DC Motor Speed Controller: Control a DC Motor w/o Tachometer Feedback Diode-Based Temperature Measurement Level Shifting Signals with Differential Amplifiers Operational Amplifier Macromodels: A Comparison Single-Supply, Low-Power Measurements of Bridge Networks Thermistor Temperature Transducer to ADC Application Signal Conditioning Wheatstone Resistive Bridge Sensors 3V Accelerometer Featuring TLV2772 Application Brief Low-Power Signal Conditioning for a Pressure Sensor
Sensors, Sensors Conditioning, 4-20mA Transmitters
Comparing Bus Solutions (Rev. A) Signaling Rate versus Transfer Rate Introduction to the Controller Area Network (CAN) A System Evaluation of CAN Transceivers M-LVDS Signaling Rate Versus Distance RS-485 for E-Meter Applications (Rev. A) Use Receiver Equalization to Extend RS-485 Data Communications RS-485 at 230-kbps over Uncontrolled Interconnect The RS-485 Unit Load and Maximum Number of Bus Connections RS-485 for Digital Motor Control Applications
Control and Monitoring-Power and Logic
Linear Products Brush Motor Control TPIC6C596 Power+LogicTM Shift Register Application TPIC6595 Power+LogicTM 8-Bit Shift Reg. with Low-Side Power DMOS Switches (Rev. A)
RF
Implementing a Bi-directional Frequency Hopping swra041 Application with TRF6903 and MSP430 Implementing a Bi-directional Wireless UART Application w/TRF6903 & MSP430 swra039 Designing with the TRF6900 Single-Chip RF Transceiver (Rev. D) swra033d Designing Switching Voltage Regulators with the TL494 (Rev. C) slva001c
Power Management-Voltage References and Shunts
Implementing a 4mA to 20mA Current Loop on TI DSPs 20mA to 0-20mA Converter & Current Summing Current-to-Current Converters 0-20mA Receiver using RCV42 Four-Wire RTD Current-Loop Transmitter IC Building Blocks Form Complete Isolated 4-20mA Current-Loop Input Overload Protection for the RCV420 4-20mA Current-Loop Receiver Single Supply 4-20mA Current Loop Receiver Use Low-Impedance Bridges on 4-20mA Current Loop Build a 3-Phase Sine Wave Generator with the UAF42 Design a 60Hz Notch Filter with the UAF42 Photodiode Monitoring with Op Amps Interfacing the MSP430 and TMP100 I2C Temperature Sensor
Solenoid/Valve Power Drivers, TEC & Pump Laser Bias
Improved Voltage Reference Filter has Several Advantages Low Power Operation of REF102 10.0V Precision Voltage Reference Diode-Based Temperature Measurement
Power Management Special Functions
sbva010 sbva008 sboa019
Closed Loop Temperature Regulation Using the UC3638 H-Bridge Motor (Rev. A) slua202a DN-50 Simple Tech. for Isolating and Correcting Common App. Problems slua182 U-102 UC1637/2637/3637 Switched Mode Controller for DC Motor Drive slua137 U-112 A High Precision PWM Transconductance Amplifier for Microstepping slua073 U-115 New Integ. Circuit Produces Robust, Noise Immune Sys. for Brushless slua106 U-120 A Simple. Approach to DC Motor Modeling for Dynamic Stability Analysis slua076 U-130 Dedicated ICs Simplify Brushless DC Servo Amplifier Design slua083 UC3717 and L-C Filter Reduce EMI and Chopping Losses in Step Motor slua141
PWM Power Driver Modulation Schemes Thermo-Electric Cooler Control using a TMS320F2812 DSP and DRV592 Power Amplifier
Data Converters-Analog Monitor and Control Circuitry
AMC7820REF: A Reference Design for DWDM Pump Lasers

Analog-to-Digital Converters
sbaa072 sbaa117 sbaa104 slwa036 sboa096
Data Converters for Industrial Power Measurements Using Ceramic Resonators with the ADS1255/6 Standard Procedure Direct Meas. Sub-picosecond RMS Jitter High-Speed ADC High-Voltage Signal Conditioning for Differential ADCs
TI Worldwide Technical Support

Internet
TI Semiconductor Product Information Center Home Page support.ti.com TI Semiconductor KnowledgeBase Home Page support.ti.com/sc/knowledgebase Japan Fax International Domestic Internet International Domestic
+81-3-3344-5317 0120-81-0036 support.ti.com/sc/pic/japan.htm www.tij.co.jp/pic
Product Information Centers

Americas Phone Fax Internet +1(972) 644-5580 +1(972)927-6377 support.ti.com/sc/pic/americas.htm
Europe, Middle East, and Africa Phone Belgium (English) +32 (0) 27 45 54 32 Finland (English) +358 (0) 9 25173948 France +33 (0) 1 30 70 11 64 Germany +49 (0) 8161 80 33 11 Israel (English) 180 949 0107 Italy 800 79 11 37 Netherlands (English) +31 (0) 546 87 95 45 Russia +7 (0) 95 363 4824 Spain +34 902 35 40 28 Sweden (English) +46 (0) 8587 555 22 United Kingdom +44 (0) 1604 66 33 99 Fax +49 (0) 8161 80 2045 Internet support.ti.com/sc/pic/euro.htm
Technology for Innovators, the black/red banner, C2000, C28x, C64x, EasyRF, FilterPro, Fusion Digital Power, Impedence Track, LinBICMOS, MicroStar BGA, OHCI-Lynx, PCILynx, Power+Logic, PowerPAD, SWIFT, TMS320, TMS320C28x, TMS320C55x, TMS320C6000, TMS320C64x and TMS320C67x are trademarks of Important Instruments. All other trademarks are the property of their Texas Notice: The owners. respective products 2006 Texas Instruments Incorporated and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TIs standard terms and conditions of sale. Customers are Printed in U.S.A. by Colonial Press International, D120905
Asia Phone International +886-2-23786800 Domestic Toll Free Number Australia 1-800-999-084 China 800-820-8682 Hong Kong 800-96-5941 India +91-80-51381665 (Toll) Indonesia 001-803-8861-1006 Korea 080-551-2804 Malaysia 1-800-80-3973 New Zealand 0800-446-934 Philippines 1-800-765-7404 Singapore 800-886-1028 Taiwan 0800-006800 Thailand 001-800-886-0010 Fax +886-2-2378-6808 Email tiasia@ti.com or ti-china@ti.com Internet support.ti.com/sc/pic/asia.htm
Safe Harbor Statement This publication may contain forward-looking statements that involve a number of risks and uncertainties. These forwardlooking statements are intended to qualify for the safe harbor from liability established by the Private Securities Litigation Reform Act of 1995. These forward-looking statements generally can be identified by phrases such as TI or its management believes, expects, anticipates, foresees, forecasts, estimates or other words or phrases of similar import. Similarly, such statements herein that describe the companys products, business strategy, outlook, objectives, plans, intentions or goals also are forward-looking statements. All such forward-looking statements are subject to certain risks and uncertainties that could cause actual results to differ materially from those in forwardlooking statements. Please refer to TIs most recent Form 10-K for more information on the risks and uncertainties that could materially affect future results of operations. We disclaim any intention or obligation to update any forward-looking statements as a result of developments occurring after the date of this publication. Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TIs standard terms and conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customers applications or product designs, software performance, or infringement of patents. The publication of information regarding any other companys products or services does not constitute TIs approval, warranty or endorsement thereof.
D091905 Florida, on recycled paper Miami,
Texas Instruments Incorporated 14950 FAA BLVD Fort Worth, Texas 76155-9951 Address service requested
PRSRT STD U.S. POSTAGE
PAID
DALLAS, TEXAS PERMIT NO. 2758
SLAB039C
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless

Slab 039 C

Uploaded by

Copyright:

Available Formats

Slab 039 C

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Slab 039 C

Uploaded by

Copyright:

Available Formats

Industrial Solutions Guide

Industrial Solutions Guide

Sensor Application Inputs

POWER MANAGEMENT SOLUTIONS

Test and Measurement

Wireless for Industrial

Programmable Logic Control

Field Bus Systems

Difference, Pg 48 ADCs, Pg 56 Instrumentation, Pgs 49-50 Programmable Gain, Pg 55

Powering Industrial Designs

Sensor Conditioners 4-20mA Transmitters, Pg 55

SAR ADCs, Pgs 57-59

INTERFACE Pgs 65-70

Worldwide Technical Support

Industrial Solutions Guide

Texas Instruments 1Q 2006

Industrial Solutions Guide

Complete Industrial Solutions from TI

DSP and FPGA Power

TMS320C28xTM Digital Signal Controllers, Pg 63

PWM Power Drivers, Pg 53

MSP430 Microcontrollers, Pgs 64-65

String DACs, Pgs 60-62

Digital Temperature Sensors, Pg 54

R-2R DACs, Pgs 60-62

Serial Gigabit Transceiver

Texas Instruments 1Q 2006

Industrial Solutions Guide

Intelligent Sensors, Process Control

Interface RS-485/CAN/ Profibus

T Linearization Circuit psi 50 + Excitation Linearization Circuit

SVS Look-Up and Interpolation Logic Int Temp

Look-Up and Interpolation Logic

Non-Linear Bridge Transducer

Over/Under Scale Limiter Analog Processing

0-10V / 4-20mA Output

24VDC/2.7V - 5.5V Supply Voltage DC/DC Conversion

Pressure system functional block diagram.

Uncorrected Bridge Output

10 Power Supply + VS PRG VOUT 10nF GND

PGA309 bridge pressure nonlinearity correction.

Texas Instruments 1Q 2006

Intelligent Sensors, Process Control

Zero-Drift, Low Offset, Single-Supply Op Amps

Ref Linearization DAC

Non-Linear Bridge Transducer

Analog Sensor Linearization

OPA335 5V supply bridge amplifier.

Over/Under Scale Limiter Analog Signal Conditioning

Digital Temperature Compensation Ext Temp

PGA309 functional block diagram.

Texas Instruments 1Q 2006

Industrial Solutions Guide

Intelligent Sensors, Process Control

24-Bit, ADC with Excellent AC and DC Performance

8 Differential Inputs or 16 Single-Ended Inputs

ADS1271 block diagram.

ADS1258 functional block diagram.

Industrial Solutions Guide