Technical Q & A

*
Linked Lists
o How do you reverse a singly linked list? How do you reverse a doubly linked
list? Write a C program to do the same.
Updated!
o Given only a pointer to a node to be deleted in a singly linked list, how do you
delete it? Updated!
o How do you sort a linked list? Write a C program to sort a linked list.
o How to declare a structure of a linked list?
o Write a C program to implement a Generic Linked List.
o How do you reverse a linked list without using any C pointers? Updated!
o How would you detect a loop in a linked list? Write a C program to detect a loop
in a linked list.
o How do you find the middle of a linked list? Write a C program to return the
middle of a linked list
o If you are using C language to implement the heterogeneous linked list, what
pointer type will you use?
o How to compare two linked lists? Write a C program to compare two linked lists.
o How to create a copy of a linked list? Write a C program to create a copy of a
linked list.
o Write a C program to free the nodes of a linked list Updated!
o Can we do a Binary search on a linked list?
o Write a C program to return the nth node from the end of a linked list. New!
o How would you find out if one of the pointers in a linked list is corrupted or not?
New!
* Write your own ....
o Write your own C program to implement the atoi() function Updated!
o Implement the memmove() function. What is the difference between the
memmove() and memcpy() function? Updated!
o Write C code to implement the strstr() (search for a substring) function.
o Write your own printf() function in C
o Implement the strcpy() function. Updated!
o Implement the strcmp(str1, str2) function. Updated!
o Implement the substr() function in C.
o Write your own copy() function
o Write C programs to implement the toupper() and the isupper() functions
Updated!
o Write a C program to implement your own strdup() function.
o Write a C program to implement the strlen() function
* Programs
o Write a C program to swap two variables without using a temporary variable
o What is the 8 queens problem? Write a C program to solve it.
o Write a C program to print a square matrix helically.
o Write a C program to reverse a string Updated!

o Write a C program to reverse the words in a sentence in place. Updated!
o Write a C program generate permutations.
o Write a C program for calculating the factorial of a number
o Write a C program to calculate pow(x,n)?
o Write a C program which does wildcard pattern matching algorithm
o How do you calculate the maximum subarray of a list of numbers?
o How to generate fibonacci numbers? How to find out if a given number is a
fibonacci number or not? Write C programs to do both.
o Solve the Rat In A Maze problem using backtracking.
o What Little-Endian and Big-Endian? How can I determine whether a machine's
byte order is big-endian or little endian? How
can we convert from one to another?
o Write C code to solve the Tower of Hanoi problem.
o Write C code to return a string from a function Updated!
o Write a C program which produces its own source code as its output
o Write a C progam to convert from decimal to any base (binary, hex, oct etc...)
o Write C code to check if an integer is a power of 2 or not in a single line?
o Write a C program to find the GCD of two numbers. Updated!
o Finding a duplicated integer problem *
o Write code to remove duplicates in a sorted array. Updated!
o Find the maximum of three integers using the ternary operator.
o How do you initialize a pointer inside a function?
o Write C code to dynamically allocate one, two and three dimensional arrays
(using malloc()) New!
o How would you find the size of structure without using sizeof()?
o Write a C program to multiply two matrices.
o Write a C program to check for palindromes.
o Write a C program to convert a decimal number into a binary number.
o Write C code to implement the Binary Search algorithm.
o Wite code to evaluate a polynomial.
o Write code to add two polynomials
o Write a program to add two long positive numbers (each represented by linked
lists).
o How do you compare floating point numbers? Updated!
o What's a good way to implement complex numbers in C?
o How can I display a percentage-done indication on the screen?
o Write a program to check if a given year is a leap year or not?
o Is there something we can do in C but not in C++?
o How to swap the two nibbles in a byte ?
o How to scan a string till we hit a new line using scanf()?
o Write pseudocode to compare versions (like 115.10.1 vs 115.11.5).
o How do you get the line numbers in C?
o How to fast multiply a number by 7?
o Write a simple piece of code to split a string at equal intervals
o Is there a way to multiply matrices in lesser than o(n^3) time complexity?
o How do you find out if a machine is 32 bit or 64 bit? *
o Write a program to have the output go two places at once (to the screen and to a
file also)
o Write code to round numbers
o How can we sum the digits of a given number in single statement?
o Given two strings A and B, how would you find out if the characters in B were a
subset of the characters in A?
o Write a program to merge two arrays in sorted order, so that if an integer is in
both the arrays, it gets added into the final array only once. *
o Write a program to check if the stack grows up or down
o How to add two numbers without using the plus operator?
o How to generate prime numbers? How to generate the next prime after a given
prime?
o Write a program to print numbers from 1 to 100 without using loops!
o Write your own trim() or squeeze() function to remove the spaces from a string.
New!
o Write your own random number generator function in C.*
o Write your own sqrt() function in C*
* Trees
o Write a C program to find the depth or height of a tree.
o Write a C program to determine the number of elements (or size) in a tree.
o Write a C program to delete a tree (i.e, free up its nodes)
o Write C code to determine if two trees are identical
o Write a C program to find the mininum value in a binary search tree.
o Write a C program to compute the maximum depth in a tree?
o Write a C program to create a mirror copy of a tree (left nodes become right and
right nodes become left)!
o Write C code to return a pointer to the nth node of an inorder traversal of a BST.
New!
o Write C code to implement the preorder(), inorder() and postorder() traversals.
Whats their time complexities? Updated!
o Write a C program to create a copy of a tree
o Write C code to check if a given binary tree is a binary search tree or not?
o Write C code to implement level order traversal of a tree. New!
o Write a C program to delete a node from a Binary Search Tree?
o Write C code to search for a value in a binary search tree (BST).
o Write C code to count the number of leaves in a tree
o Write C code for iterative preorder, inorder and postorder tree traversals New!
o Can you construct a tree using postorder and preorder traversal?
o Construct a tree given its inorder and preorder traversal strings. Similarly
construct a tree given its inorder and post order
traversal strings. Updated!
o Find the closest ancestor of two nodes in a tree. New!
o Given an expression tree, evaluate the expression and obtain a paranthesized
form of the expression.
o How do you convert a tree into an array?
o What is an AVL tree? Updated!
o How many different trees can be constructed using n nodes?
o A full N-ary tree has M non-leaf nodes, how many leaf nodes does it have?
o Implement Breadth First Search (BFS) and Depth First Search (DFS) Updated!
o Write pseudocode to add a new node to a Binary Search Tree (BST) Updated!
o What is a threaded binary tree?
* Bit Fiddling
o Write a C program to count bits set in an integer? Updated!
o What purpose do the bitwise and, or, xor and the shift operators serve?
o How to reverse the bits in an interger?
o Check if the 20th bit of a 32 bit integer is on or off?
o How to reverse the odd bits of an integer?
o How would you count the number of bits set in a floating point number?*
* Sorting Techniques
o What is heap sort?
o What is the difference between Merge Sort and Quick sort?
o Give pseudocode for the mergesort algorithm
o Implement the bubble sort algorithm. How can it be improved? Write the code
for selection sort, quick sort, insertion sort.
* C Pointers
o What does *p++ do? Does it increment p or the value pointed by p?
o What is a NULL pointer? How is it different from an unitialized pointer? How is
a NULL pointer defined?
o What is a null pointer assignment error?
o Does an array always get converted to a pointer? What is the difference between
arr and &arr? How does one declare a
pointer to an entire array?
o Is the cast to malloc() required at all?
o What does malloc() , calloc(), realloc(), free() do? What are the common
problems with malloc()? Is there a way to find out how much memory a pointer was
allocated?
o What's the difference between const char *p, char * const p and const char *
const p? Updated!
o What is a void pointer? Why can't we perform arithmetic on a void * pointer?
o What do Segmentation fault, access violation, core dump and Bus error mean?
o What is the difference between an array of pointers and a pointer to an array?
o What is a memory leak?
o What are brk() and sbrk() used for? How are they different from malloc()?
o What is a dangling pointer? What are reference counters with respect to pointers?
o What do pointers contain?
o Is *(*(p+i)+j) is equivalent to p[i][j]? Is num[i] == i[num] == *(num + i) == *(i +
num)?
o What operations are valid on pointers? When does one get the Illegal use of
pointer in function error?
o What are near, far and huge pointers? New!
o What is the difference between malloc() and calloc()? New!
o Why is sizeof() an operator and not a function? New!
o What is an opaque pointer?
* C Functions
o How to declare a pointer to a function?
o Does extern in a function declaration mean anything?
o How can I return multiple values from a function?
o Does C support function overloading?
o What is the purpose of a function prototype?
o What are inline functions?
o How to declare an array of N pointers to functions returning pointers to functions
returning pointers to characters?
o Can we declare a function that can return a pointer to a function of the same type?
o How can I write a function that takes a variable number of arguments? What are
the limitations with this? What is vprintf()?
o With respect to function parameter passing, what is the difference between callby-value and call-by-reference? Which
method does C use? Updated!
o If I have the name of a function in the form of a string, how can I invoke that
function? New!
o What does the error, invalid redeclaration of a function mean?
o How can I pass the variable argument list passed to one function to another
function.
o How do I pass a variable number of function pointers to a variable argument
(va_arg) function?
o Will C allow passing more or less arguments than required to a function.
* C Statements
o Whats short-circuiting in C expressions?
o Whats wrong with the expression a[i]=i++; ? Whats a sequence point? Updated!
o Does the ?: (ternary operator) return a lvalue? How can I assign a value to the
output of the ternary operator?
o Is 5[array] the same as array[5]?
o What are #pragmas?
o What is the difference between if(0 == x) and if(x == 0)?
o Should we use goto or not?
o Is ++i really faster than i = i + 1?
o What do lvalue and rvalue mean?
o What does the term cast refer to? Why is it used?
o What is the difference between a statement and a block?
o Can comments be nested in C?
o What is type checking?
o Why can't you nest structure definitions?
o What is a forward reference?
o What is the difference between the & and && operators and the | and || operators?
o Is C case sensitive (ie: does C differentiate between upper and lower case
letters)?
o Can goto be used to jump across functions?
o Whats wrong with #define myptr int *?
o What purpose do #if, #else, #elif, #endif, #ifdef, #ifndef serve?
o Can we use variables inside a switch statement? Can we use floating point
numbers? Can we use expressions?

o What is more efficient? A switch() or an if() else()?
o What is the difference between a deep copy and a shallow copy?
* C Arrays
o How to write functions which accept two-dimensional arrays when the width is
not known before hand?
o Is char a[3] = "abc"; legal? What does it mean?
o If a is an array, is a++ valid?
* C Variables
o What is the difference between the declaration and the definition of a variable?
o Do Global variables start out as zero?
o Does C have boolean variable type?
o Where may variables be defined in C?
o To what does the term storage class refer? What are auto, static, extern, volatile,
const classes?
o What does the typedef keyword do?
o What is the difference between constants defined through #define and the
constant keyword?
o What are Trigraph characters?
o How are floating point numbers stored? Whats the IEEE format? Updated!
* C Structures
o Can structures be assigned to variables and passed to and from functions?
o Can we directly compare two structures using the == operator? Updated!
o Can we pass constant values to functions which accept structure arguments?
o How does one use fread() and fwrite()? Can we read/write structures to/from
files?
o Why do structures get padded? Why does sizeof() return a larger size?
o Can we determine the offset of a field within a structure and directly access that
element?
o What are bit fields in structures? Updated!
o What is a union? Where does one use unions? What are the limitations of
unions? New!
* C Macros
o How should we write a multi-statement macro?
o How can I write a macro which takes a variable number of arguments?
o What is the token pasting operator and stringizing operator in C?
o Define a macro called SQR which squares a number. Updated!
* C Headers
o What should go in header files? How to prevent a header file being included
twice? Whats wrong with including more headers?
o Is there a limit on the number of characters in the name of a header file?
* C File operations
o How do stat(), fstat(), vstat() work? How to check whether a file exists?
o How can I insert or delete a line (or record) in the middle of a file?
o How can I recover the file name using its file descriptor?
o How can I delete a file? How do I copy files? How can I read a directory in a C
program?
o Whats the use of fopen(), fclose(), fprintf(), getc(), putc(), getw(), putw(), fscanf
(), feof(), ftell(), fseek(), rewind(), fread(), fwrite
(), fgets(), fputs(), freopen(), fflush(),
ungetc()?
o How to check if a file is a binary file or an ascii file? New!
* C Declarations and Definitions
o What is the difference between char *a and char a[]? Updated!
o How can I declare an array with only one element and still access elements
beyond the first element (in a valid fashion)?
o What is the difference between enumeration variables and the preprocessor
#defines?
* C Functions - built-in
o Whats the difference between gets() and fgets()? Whats the correct way to use
fgets() when reading a file?
o How can I have a variable field width with printf?
o How can I specify a variable width in a scanf() format string?
o How can I convert numbers to strings (the opposite of atoi)?
o Why should one use strncpy() and not strcpy()? What are the problems with
strncpy()?
o How does the function strtok() work?
o Why do we get the floating point formats not linked error?
o Why do some people put void cast before each call to printf()?
o What is assert() and when would I use it?
o What do memcpy(), memchr(), memcmp(), memset(), strdup(), strncat(), strcmp
(), strncmp(), strcpy(), strncpy(), strlen(),
strchr(), strchr(), strpbrk(), strspn(), strcspn
(), strtok() do? Updated!
o What does alloca() do?
o Can you compare two strings like string1==string2? Why do we need strcmp()?
o What does printf() return? New!
o What do setjmp() and longjump() functions do? New!
* C Functions - The main function
o Whats the prototype of main()? Can main() return a structure?
o Is exit(status) equivalent to returning the same status from main()?
o Can main() be called recursively?
o How to print the arguments recieved by main()?
* OS Concepts
o What do the system calls fork(), vfork(), exec(), wait(), waitpid() do? Whats a
Zombie process? Whats the difference
between fork() and vfork()?
o How does freopen() work? *
o What are threads? What is a lightweight process? What is a heavyweight
process? How different is a thread from a process? *
o How are signals handled? *
o What is a deadlock? *
o What are semaphores? *
o What is meant by context switching in an OS?*
o What is Belady's anomaly?
Edited by Foxit Reader

Copyright(C) by Foxit Corporation,2005-2009
For Evaluation Only.
o What is thrashing?*
o What are short-, long- and medium-term scheduling?
o What are turnaround time and response time?
o What is the Translation Lookaside Buffer (TLB)?
o What is cycle stealing?
o What is a reentrant program?
o When is a system in safe state?
o What is busy waiting?
o What is pages replacement? What are local and global page replacements?*
o What is meant by latency, transfer and seek time with respect to disk I/O?
o What are monitors? How are they different from semaphores?*
o In the context of memory management, what are placement and replacement
algorithms?
o What is paging? What are demand- and pre-paging?*
o What is mounting?
o What do you mean by dispatch latency?
o What is multi-processing? What is multi-tasking? What is multi-threading? What
is multi-programming?*
o What is compaction?
o What is memory-mapped I/O? How is it different frim I/O mapped I/O?
o List out some reasons for process termination.
* General Concepts
o What is the difference between statically linked libraries and dynamically
linked libraries (dll)? Updated!
o What are the most common causes of bugs in C?
o What is hashing?
o What do you mean by Predefined?
o What is data structure?
o What are the time complexities of some famous algorithms?
o What is row major and column major form of storage in matrices?
o Explain the BigOh notation. Updated!
o Give the most important types of algorithms.
o What is marshalling and demarshalling? New!
o What is the difference between the stack and the heap? Where are the different
types of variables of a program stored in
memory? New!
o Describe the memory map of a C program.
o What is infix, prefix, postfix? How can you convert from one representation to
another? How do you evaluate these expressions?
o How can we detect and prevent integer overflow and underflow?*
* Compiling and Linking
o How to list all the predefined identifiers?
o How the compiler make difference between C and C++?
o What are the general steps in compilation?
o What are the different types of linkages? New!
o What do you mean by scope and duration? New!
1.How do you reverse a singly linked list? How do you reverse a doubly linked list?
Write a C program to do the same.

This is THE most frequently asked interview question. The most!.
Singly linked lists
Here are a few C programs to reverse a singly linked list.
Method1 (Iterative)
#include <stdio.h>
// Variables
typedef struct node
{
int value;
struct node *next;
}mynode;
// Globals (not required, though).
mynode *head, *tail, *temp;
// Functions
void add(int value);
void iterative_reverse();
void print_list();
// The main() function
int main()
{
head=(mynode *)0;
// Construct the linked list.
add(1);
add(2);
add(3);
//Print it
print_list();
// Reverse it.
iterative_reverse();
//Print it again
print_list();
return(0);
}
// The reverse function
void iterative_reverse()
{
mynode *p, *q, *r;
if(head == (mynode *)0)
{
return;
}
p = head;
q = p->next;
p->next = (mynode *)0;
while (q != (mynode *)0)
{
r = q->next;
q->next = p;
p = q;
q = r;
}
head = p;
}
// Function to add new nodes to the linked list
void add(int value)
{
temp = (mynode *) malloc(sizeof(struct node));
temp->next=(mynode *)0;
temp->value=value;
if(head==(mynode *)0)
{
head=temp;
tail=temp;
}
else
{
tail->next=temp;
tail=temp;
}
}
// Function to print the linked list.
void print_list()
{
printf("\n\n");
for(temp=head; temp!=(mynode *)0; temp=temp->next)

{
printf("[%d]->",(temp->value));
}
printf("[NULL]\n\n");
}
Method2 (Recursive, without using any temporary variable)
#include <stdio.h>
// Variables
typedef struct node
{
int value;
struct node *next;
}mynode;
// Globals.
mynode *head, *tail, *temp;
// Functions
void add(int value);
mynode* reverse_recurse(mynode *root);
void print_list();
// The main() function
int main()
{
head=(mynode *)0;
add(1);
add(2);
add(3);
//Print it
print_list();
// Reverse it.
if(head != (mynode *)0)
{
temp = reverse_recurse(head);
temp->next = (mynode *)0;
}
//Print it again
print_list();
return(0);
}
// Reverse the linked list recursively
//
// This function uses the power of the stack to make this
// *magical* assignment
//
// node->next->next=node;
//
// :)
mynode* reverse_recurse(mynode *root)
{
if(root->next!=(mynode *)0)
{
reverse_recurse(root->next);
root->next->next=root;
return(root);
}
else
{
head=root;
}
}
// Function to add new nodes to the linked list.
void add(int value)
{
temp->next=(mynode *)0;
temp->value=value;
if(head==(mynode *)0)
{
head=temp;
tail=temp;
}
else
{
tail->next=temp;
tail=temp;
}
}
void print_list()
{
printf("\n\n");
{
}
}
Method3 (Recursive, but without ANY global variables. Slightly messy!)
#include <stdio.h>
// Variables
typedef struct node
{
int value;
struct node *next;
}mynode;
// Functions
void add(mynode **head, mynode **tail, int value);
mynode* reverse_recurse(mynode *current, mynode *next);
void print_list(mynode *);
int main()
{
mynode *head, *tail;
head=(mynode *)0;
add(&head, &tail, 1);
//Print it
print_list(head);
// Reverse it.
head = reverse_recurse(head, (mynode *)0);
//Print it again
print_list(head);
getch();
return(0);
}
// Reverse the linked list recursively

mynode* reverse_recurse(mynode *current, mynode *next)
{
mynode *ret;
if(current==(mynode *)0)
{
return((mynode *)0);
}
ret = (mynode *)0;
if (current->next != (mynode *)0)
{
ret = reverse_recurse(current->next, current);
}
else
{
ret = current;
}
current->next = next;
return ret;
}
// Function to add new nodes to the linked list.
// Takes pointers to pointers to maintain the
// *actual* head and tail pointers (which are local to main()).
void add(mynode **head, mynode **tail, int value)
{
mynode *temp1, *temp2;
temp1 = (mynode *) malloc(sizeof(struct node));
temp1->next=(mynode *)0;
temp1->value=value;
if(*head==(mynode *)0)
{
*head=temp1;
*tail=temp1;
}
else
{
for(temp2 = *head; temp2->next!= (mynode *)0; temp2=temp2->next);
temp2->next = temp1;
*tail=temp1;
}
}
void print_list(mynode *head)
{
mynode *temp;
printf("\n\n");
{
}
}
Doubly linked lists
This is really easy, just keep swapping the prev and next pointers and at the end swap the
head and the tail:)
#include<stdio.h>
#include<ctype.h>
typedef struct node
{
int value;
struct node *next;
struct node *prev;
}mynode ;
void add_node(int value);
void print_list();
void reverse();
int main()
{
head=NULL;
tail=NULL;
add_node(1);
add_node(2);
add_node(3);
add_node(4);
add_node(5);
print_list();
reverse();
print_list();
return(1);
}
void add_node(int value)
{
mynode *temp, *cur;
temp = (mynode *)malloc(sizeof(mynode));
temp->next=NULL;
temp->prev=NULL;
if(head == NULL)
{
printf("\nAdding a head pointer\n");
head=temp;
tail=temp;
temp->value=value;
}
else
{
for(cur=head;cur->next!=NULL;cur=cur->next);
cur->next=temp;
temp->prev=cur;
temp->value=value;
tail=temp;
}
}
void print_list()
{
mynode *temp;
printf("\n--------------------------------\n");
for(temp=head;temp!=NULL;temp=temp->next)
{
printf("\n[%d]\n",temp->value);
}
}
void reverse()
{
mynode *cur, *temp, *save_next;
if(head==tail)return;
if(head==NULL || tail==NULL)

return;
for(cur=head;cur!=NULL;)
{
printf("\ncur->value : [%d]\n",cur->value);
temp=cur->next;
save_next=cur->next;
cur->next=cur->prev;
cur->prev=temp;
cur=save_next;
}
temp=head;
head=tail;
tail=temp;
}
2.Given only a pointer to a node to be deleted in a singly linked list, how do you
delete it?
This is a very good interview question
The solution to this is to copy the data from the next node into this node and delete the
next node!. Ofcourse this wont work if the node to be deleted is the last node. Mark it as
dummy in that case. If you have a Circular linked list, then this might be all the more
interesting. Try writing your own C program to solve this problem. Having a doubly
linked list is always better.
3.How do you sort a linked list? Write a C program to sort a linked list.
This is a very popular interview question, which most people go wrong. The ideal
solution to this problem is to keep the linked list sorted as you build it. This really saves a
lot of time which would have been required to sort it.
However....
Method1 (Usual method)
The general idea is to decide upon a sorting algorithm (say bubble sort). Then, one needs
to come up with different scenarios to swap two nodes in the linked list when they are not
in the required order. The different scenarios would be something like
1. When the nodes being compared are not adjacent and one of them is the first node.
2. When the nodes being compared are not adjacent and none of them is the first node
3. When the nodes being compared are adjacent and one of them is the first node.
4. When the nodes being compared are adjacent and none of them is the first node.
One example bubble sort for a linked list goes like this
for(i = 1; i < n; i++)

{
p1 = head;
p2 = head->next;
p3 = p2->next;
for(j = 1; j <= (n - i); j++)
{
if(p2->value < p3->value)
{
p2->next = p3->next;
p3->next = p2;
p1->next = p3;
p1
= p3;
p3
= p2->next;
}
else
{
p1 = p2;
p2 = p3;
p3 = p3->next;
}
}
}
As you can see, the code becomes quite messy because of the pointer logic. Thats why I
have not elaborated too much on the code, nor on variations such as soring a doubly
linked list. You have to do it yourself once to understand it.
Method1 (Divide and Conquer using merge sort)
The pseudocode for this method is
typedef struct node
{
int value;
struct node *next;
}mynode;
int size;
mynode *mergesort(mynode *list, int size);
void display(mynode *list);
mynode *mergesort(mynode *list, int size)
{
int size1, size2;

mynode *tempnode1, *tempnode2, *tempnode3;

if( size<=2 )
{
if(size==1)
{
// Nothing to sort!
return(list);
}
else
{
if(list->value < list->next->value
{
// These 2 nodes are already in right order, no need to sort
return(list);
}
else
{
// Need to swap these 2 nodes
/* Here we have 2 nodes
*
*node 1 -> node2 -> NULL
*
* This should be converted to
*
* node2 -> node1 -> NULL
*
*/
tempnode1 = list;
tempnode2 = list->next;
tempnode2->next = tempnode1;
tempnode1->next = NULL;
return(tempnode2);
}
}
}
else
{
// The size of the linked list is more than 2.
// Need to split this linked list, sort the
// left and right sub-linked lists and merge.
// Split.
// tempnode1 will have the first half of the linked list of size "size1".
// tempnode2 will have the second half of the linked list of size "size2".
<CODE TO SPLIT THE LINKED LIST INTO TWO>
// Sort the two halves recursively

tempnode1 = mergesort(tempnode1, size1);

tempnode2 = mergesort(tempnode2, size2);
// Now merge the sorted lists back, let tempnode3 point to that new list.
<CODE TO MERGE THE 2 LINKED LISTS BACK INTO A SINGLE
SORTED LINKED LIST>
return(tempnode3);
}
}
The code to merge the two already sorted sub-linked lists into a sorted linked list could be
something like this..
mynode * merge(mynode *a, mynode *b)
{
mynode *i, *j, *k, *c;
i = a;
j = b;
c = getNewNode();
k = getNewNode();
while(i != NULL && j != NULL)
{
if( i -> value < j -> value )
{
k -> next = i;
i = i -> next;
}
else
{
k -> next = j;
j = j -> next;
}
}
if( i != NULL)
k -> next = i ;
else
k -> next = j;
return( c -> next );
}

4.How to declare a structure of a linked list?

The right way of declaring a structure for a linked list in a C program is
struct node
{
int value;
struct node *next;
};
typedef struct node *mynode;
Note that the following are not correct
typedef struct
{
int value;
mynode next;
} *mynode;
The typedef is not defined at the point where the "next" field is declared.
struct node
{
int value;
struct node next;
};
typedef struct node mynode;
You can only have pointer to structures, not the structure itself as its recursive!
5.Write a C program to implement a Generic Linked List.
Here is a C program which implements a generic linked list. This is also one of the very
popular interview questions thrown around. The crux of the solution is to use the void C
pointer to make it generic. Also notice how we use function pointers to pass the address
of different functions to print the different generic data.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
typedef struct list
{
void *data;
struct list *next;
} List;
struct check
{
int i;
char c;
double d;
}chk[] = { { 1, 'a', 1.1 },{ 2, 'b', 2.2 }, { 3, 'c', 3.3 } };
void insert(List **, void *, unsigned int);
void print(List *, void (*)(void *));
void printstr(void *);
void printint(void *);
void printchar(void *);
void printcomp(void *);
List *list1, *list2, *list3, *list4;
int main(void)
{
char c[] = { 'a', 'b', 'c', 'd' };
int i[] = { 1, 2, 3, 4 };
char *str[] = { "hello1", "hello2", "hello3", "hello4" };
list1 = list2 = list3 = list4 = NULL;
insert(&list1, &c[0], sizeof(char));
insert(&list2, &i[0], sizeof(int));
insert(&list3, str[0], strlen(str[0])+1);
insert(&list4, &chk[0], sizeof chk[0]);
printf("Printing characters:");
print(list1, printchar);

printf(" : done\n\n");
printf("Printing integers:");
print(list2, printint);
printf("Printing strings:");
print(list3, printstr);
printf("Printing composite:");
print(list4, printcomp);
printf(" : done\n");
return 0;
}
void insert( List **p, void *data, unsigned int n )
{
List *temp;
int i;
/* Error check is ignored */
temp = malloc( sizeof ( List ) );
temp -> data = malloc( n );
for (i = 0; i < n; i++)
*( char * ) ( temp -> data + i ) = *( char * ) ( data + i );
temp -> next = *p;
inserting at head
*p = temp;
}
void print( List *p, void ( *f ) ( void * ) )
{
while ( p )
{
( *f ) ( p -> data );
p = p -> next;
}
}
void printstr( void *str )
{
printf( " \"%s\"", ( char * ) str );
}
void printint( void *n )
{

printf( " %d", *( int * ) n );

}
void printchar( void *c )
{
printf( " %c", *( char * ) c );
}
void printcomp( void *comp )
{
struct check temp = *( struct check * )comp;
printf( " '%d:%c:%f ", temp.i, temp.c, temp.d );
}
6.How do you reverse a linked list without using any C pointers?
One way is to reverse the data in the nodes without changing the pointers themselves.
One can also create a new linked list which is the reverse of the original linked list. A
simple C program can do that for you. Please note that you would still use the "next"
pointer fields to traverse through the linked list (So in effect, you are using the pointers,
but you are not changing them when reversing the linked list).
7.How would you detect a loop in a linked list? Write a C program to detect a loop
in a linked list.
This is also one of the classic interview questions
There are multiple answers to this problem. Here are a few C programs to attack this
problem.
Brute force method
Have a double loop, where you check the node pointed to by the outer loop, with every
node of the inner loop.
typedef struct node
{
void *data;
struct node *next;
}mynode;
mynode * find_loop( NODE * head )
{
mynode *current = head;
while( current -> next != NULL )
{
mynode *temp = head;
while( temp -> next != NULL && temp != current )

{
if( current -> next == temp )
{
printf("\nFound a loop.");
return current;
}
temp = temp -> next;
}
current = current -> next;
}
return NULL;
}
Visited flag
Have a visited flag in each node of the linked list. Flag it as visited when you reach the
node. When you reach a node and the flag is already flagged as visited, then you know
there is a loop in the linked list.
Fastest method
Have 2 pointers to start of the linked list. Increment one pointer by 1 node and the other
by 2 nodes. If there's a loop, the 2nd pointer will meet the 1st pointer somewhere. If it
does, then you know there's one.
Here is some code
p = head;
q = head -> next;
while( p != NULL && q != NULL )
{
if( p == q )
{
//Loop detected!
exit( 0 );
}
p = p -> next;
q = ( q -> next ) ? ( q -> next -> next ) : q -> next;
}
// No loop.
8.How do you find the middle of a linked list? Write a C program to return the
middle of a linked list
Another popular interview question
Here are a few C program snippets to give you an idea of the possible solutions.
Method1

p = head;
q = head;
if( q -> next -> next != NULL)
{
p = p -> next;
q = q -> next -> next;
}
printf("The middle element is %d",p->data);
Here p moves one step, where as q moves two steps, when q reaches end, p will be at the
middle of the linked list.
Method2
struct node *middle(struct node *head)
{
struct node *middle=NULL;
int i;
for( i = 1 ; head ; head = head -> next , i++)
{
if( i == 1 )
middle = head ;
else if ( ( i % 2 ) == 1 )
middle = middle -> next ;
}
return middle;
}
In a similar way, we can find the 1/3 th node of linked list by changing ( i % 2 == 1 ) to ( i
% 3 == 1 ) and in the same way we can find nth node of list by changing ( i % 2 == 1 ) to
( i % n == 1 ) but make sure ur ( n <= i ).
9.If you are using C language to implement the heterogeneous linked list, what
pointer type will you use?
The heterogeneous linked list contains different data types in its nodes and we
need a link, pointer to connect them. It is not possible to use ordinary pointers for this. So
we go for void pointer. Void pointer is capable of storing pointer to any type as it is a
generic pointer type.
Check out the C program to implement a Generic linked list in the same FAQ.
10.How to compare two linked lists? Write a C program to compare two linked lists.
Here is a simple C program to accomplish the same.
int compare_linked_lists( struct node *q, struct node *r )

{
static int flag ;
if ( ( q == NULL ) && ( r == NULL ) )
{
flag=1;
}
else
{
if ( q == NULL || r == NULL )
{
flag = 0 ;
}
if ( q -> data != r -> data )
{
flag = 0;
}
else
{
compare_linked_lists ( q -> link , r -> link ) ;
}
}
return ( flag ) ;
}
Another way is to do it on similar lines as strcmp() compares two strings, character by
character (here each node is like a character).
11.How to create a copy of a linked list? Write a C program to create a copy of a
linked list.
Check out this C program which creates an exact copy of a linked list.
copy_linked_lists ( struct node *q , struct node **s )
{
if ( q != NULL )
{
*s = malloc ( sizeof ( struct node ) ) ;
( *s ) -> data = q -> data ;
( *s ) -> link = NULL ;
copy_linked_list ( q -> link , & ( ( *s ) -> link ) );
}
}
12.Write a C program to free the nodes of a linked list
Before looking at the answer, try writing a simple C program (with a for loop) to do this.

Quite a few people get this wrong.

This is the wrong way to do it:
struct list *listptr, *nextptr ;
for( listptr = head ; listptr != NULL ; listptr = listptr -> next )
{
free( listptr ) ;
}
If you are thinking why the above piece of code is wrong, note that once you free
the listptr node, you cannot do something like listptr = listptr->next!. Since listptr is
already freed, using it to get listptr->next is illegal and can cause unpredictable results
This is the right way to do it:
struct list *listptr, *nextptr;
for( listptr = head ; listptr != NULL ; listptr = nextptr )
{
nextptr = listptr -> next ;
free( listptr ) ;
}
13.Can we do a Binary search on a linked list
Great C datastructure question!
The answer is ofcourse, you can write a C program to do this. But, the question is, do you
really think it will be as efficient as a C program which does a binary search on an array?
Think hard, real hard.
Do you know what exactly makes the binary search on an array so fast and efficient? Its
the ability to access any element in the array in constant time. This is what makes it so
fast. You can get to the middle of the array just by saying array[middle]!. Now, can you
do the same with a linked list? The answer is No. You will have to write your own,
possibly inefficient algorithm to get the value of the middle node of a linked list. In a
linked list, you loosse the ability to get the value of any node in a constant time.
One solution to the inefficiency of getting the middle of the linked list during a binary
search is to have the first node contain one additional pointer that points to the node in the
middle. Decide at the first node if you need to check the first or the second half of the
linked list. Continue doing that with each half-list.
14.Write a C program to return the nth node from the end of a linked list.
Here is a solution which is often called as the solution that uses frames.
Suppose one needs to get to the 6th node from the end in this LL. First, just keep on
incrementing the first pointer (ptr1) till the number of increments cross n (which is 6 in
this case)
STEP 1 : 1(ptr1,ptr2) -> 2 -> 3 -> 4 -> 5 -> 6 -> 7 -> 8 -> 9 -> 10
STEP 2 : 1(ptr2) -> 2 -> 3 -> 4 -> 5 -> 6(ptr1) -> 7 -> 8 -> 9 -> 10
Now, start the second pointer (ptr2) and keep on incrementing it till the first pointer (ptr1)
reaches the end of the LL.
STEP 3 : 1 -> 2 -> 3 -> 4(ptr2) -> 5 -> 6 -> 7 -> 8 -> 9 -> 10 (ptr1)
So here you have!, the 6th node from the end pointed to by ptr2!
Here is some C code..
struct node
{
int data;
struct node *next;
}mynode;
mynode * nthNode(mynode *head, int n /*pass 0 for last node*/)
{
mynode *ptr1,*ptr2 ;
int count ;
if( !head )
{
return( NULL ) ;
}
ptr1 = head ;
ptr2 = head ;
count = 0 ;
while( count < n )
{
count++ ;
if ( ( ptr1 = ptr1 -> next ) == NULL )
{
//Length of the linked list less than n. Error.
return( NULL );
}
}
while( ( ptr1 = ptr1 -> next ) != NULL )
{
ptr2 = ptr2 -> next ;

}
return( ptr2 );
}
15.How would you find out if one of the pointers in a linked list is corrupted or not?
This is a really good interview question. The reason is that linked lists are
used in a wide variety of scenarios and being able to detect and correct pointer
corruptions might be a very valuable tool. For example, data blocks associated with files
in a file system are usually stored as linked lists. Each data block points to the next data
block. A single corrupt pointer can cause the entire file to be lost!Discover and fix bugs
when they corrupt the linked list and not when effect becomes visible in some other part
of the program. Perform frequent consistency checks (to see if the linked list is indeed
holding the data that you inserted into it).
It is good programming practice to set the pointer value to NULL immediately

after freeing the memory pointed at by the pointer. This will help in debugging,
because it will tell you that the object was freed somewhere beforehand. Keep
track of how many objects are pointing to a object using reference counts if
required.
Use a good debugger to see how the datastructures are getting corrupted and trace
down the problem. Debuggers like ddd on linux and memory profilers like Purify,
Electric fence are good starting points. These tools should help you track down
heap corruption issues easily.
Avoid global variables when traversing and manipulating linked lists. Imagine
what would happen if a function which is only supposed to traverse a linked list
using a global head pointer accidently sets the head pointer to NULL!.
Its a good idea to check the addNode() and the deleteNode() routines and test
them for all types of scenarios. This should include tests for inserting/deleting
nodes at the front/middle/end of the linked list, working with an empty linked list,
running out of memory when using malloc() when allocating memory for new
nodes, writing through NULL pointers, writing more data into the node fields then
they can hold (resulting in corrupting the (probably adjacent) "prev" and "next"
pointer fields), make sure bug fixes and enhancements to the linked list code are
reviewed and well tested (a lot of bugs come from quick and dirty bug fixing), log
and handle all possible errors (this will help you a lot while debugging), add
multiple levels of logging so that you can dig through the logs. The list is
endless...
Each node can have an extra field associated with it. This field indicates the
number of nodes after this node in the linked list. This extra field needs to be kept
up-to-date when we inserte or delete nodes in the linked list (It might become
slightly complicated when insertion or deletion happens not at end, but anywhere
in the linked list). Then, if for any node, p->field > 0 and p->next == NULL, it

surely points to a pointer corruption.
You could also keep the count of the total number of nodes in a linked list and use
it to check if the list is indeed having those many nodes or not.
The problem in detecting such pointer corruptions in C is that its only the programmer
who knows that the pointer is corrupted. The program has no way of knowing that
something is wrong. So the best way to fix these errors is check your logic and test your
code to the maximum possible extent. I am not aware of ways in C to recover the lost
nodes of a corrupted linked list.
I have a hunch that interviewers who ask this question are probably hinting at something
called Smart Pointers in C++. Smart pointers are particularly useful in the face of
exceptions as they ensure proper destruction of dynamically allocated objects. They can
also be used to keep track of dynamically allocated objects shared by multiple owners.
This topic is out of scope here, but you can find lots of material on the Internet for Smart
Pointers.
If you have better answers to this question, let me know!
16.Write your own C program to implement the atoi() function
The prototype of the atoi() function is ...
int atoi(const char *string);
Here is a C program which explains a different way of coding the atoi() function in the C
language.
#include<stdioi.h>
int myatoi( const char *string );
int main( int argc, char* argv[] )
{
printf("\n%d\n", myatoi("1998"));
getch();
return(0);
}
int myatoi( const char *string )
{
int i;
i = 0;
while( *string )
{
i = ( i << 3 ) + ( i << 1 ) + ( *string - '0' );
string++;
// Dont increment i!

}
return( i );
}
Try working it out with a small string like "1998", you will find out it does work!.
Ofcourse, there is also the trivial method ....
"1998" == 8 + (10 * 9) + (100 * 9) + (1 * 1000) = 1998
This can be done either by going from right to left or left to right in the string
One solution is given below
int myatoi(const char* string)
{
int value = 0;
if ( string )
{
while ( *string && ( *string <= '9' && *string >= '0' ) )
{
value = ( value * 10 ) + ( *string - '0' ) ;
string++;
}
}
return value;
}
Note that these functions have no error handling incorporated in them (what happens if
someone passes non-numeric data (say "1A998"), or negative numeric strings (say
"-1998")). I leave it up to you to add these cases. The essense is to understand the core
logic first.
17.Implement the memmove() function. What is the difference between the
memmove() and memcpy() function?
One more most frequently asked interview question!.
memmove() offers guaranteed behavior if the source and destination arguments overlap.
memcpy() makes no such guarantee, and may therefore be more efficient to implement.
It's always safer to use memmove().
Note that the prototype of memmove() is ...
void *memmove(void *dest, const void *src, size_t count);
Here is an implementation..
#include <stdio.h>
#include <string.h>
void *mymemmove(void *dest, const void *src, size_t count);
int main(int argc, char* argv[])
{
char *p1, *p2;
char *p3, *p4;

int size;
printf("\n--------------------------------\n");
------------*
* CASE 1 : From (SRC) < To (DEST)
*
* +--+---------------------+--+
*||||
* +--+---------------------+--+
*^^
*||
* From To
*
* --------------------------------------- */
p1 = (char *) malloc(12);
memset(p1,12,'\0');
size=10;
strcpy(p1,"ABCDEFGHI");
p2 = p1 + 2;
printf("\n--------------------------------\n");
printf("\nFrom (before) = [%s]",p1);
printf("\nTo (before) = [%s]",p2);
mymemmove(p2,p1,size);
printf("\n\nFrom (after) = [%s]",p1);
printf("\nTo (after) = [%s]",p2);
printf("\n--------------------------------\n");
/* ---------------------------------------*
* CASE 2 : From (SRC) > To (DEST)
*
* +--+---------------------+--+
*||||
* +--+---------------------+--+
*^^
*||
* To From
*
* --------------------------------------- */
memset(p3,12,'\0');
p4 = p3 + 2;
strcpy(p4, "ABCDEFGHI");
mymemmove(p3, p4, size);
printf("\n--------------------------------\n");
/* ---------------------------------------*
* CASE 3 : No overlap
*
* --------------------------------------- */
memset(p1,30,'\0');
size=10;
strcpy(p1,"ABCDEFGHI");
p2 = p1 + 15;
printf("\n--------------------------------\n");
mymemmove(p2,p1,size);
printf("\n--------------------------------\n");
printf("\n\n");
return 0;
}
void *mymemmove(void *to, const void *from, size_t size)

{
unsigned char *p1;
const unsigned char *p2;
p1 = (unsigned char *) to;
p2 = (const unsigned char *) from;
p2 = p2 + size;
// Check if there is an overlap or not.
while (p2 != from && --p2 != to);
if (p2 != from)
{
// Overlap detected!
p2 = (const unsigned char *) from;
p2 = p2 + size;
p1 = p1 + size;
while (size-- != 0)
{
*--p1 = *--p2;
}
}
else
{
// No overlap OR they overlap as CASE 2 above.
// memcopy() would have done this directly.
while (size-- != 0)
{
*p1++ = *p2++;
}
}
return(to);
}
And here is the output
-------------------------------From (before) = [ABCDEFGHI]
To (before) = [CDEFGHI]
From (after) = [ABABCDEFGHI]

To (after) = [ABCDEFGHI]
To (before) = [ABCDEFGHI]
From (after) = [CDEFGHI]
To (before) = [FE&:F]
From (after) = [ABCDEFGHI]
-------------------------------So then, whats the difference between the implementation of memmove() and memcpy().
Its just that memcpy() will not care if the memories overlap and will either copy from left
to right or right to left without checking which method to used depending on the type of
the overlap. Also note that the C code proves that the results are the same irrespective of
the Endian-ness of the machine.
18.Write C code to implement the strstr() (search for a substring) function.
This is also one of the most frequently asked interview questions.
Its asked almost 99% of the times. Here are a few C programs to implement your own
strstr() function.
There are a number of ways to find a string inside another string. Its important to be
aware of these algorithms than to memorize them. Some of the fastest algorithms are
quite tough to understand!.
Method1
The first method is the classic Brute force method. The Brute Force algorithm
checks, at all positions in the text between 0 and (n-m), if an occurrence of the pattern
starts at that position or not. Then, after each successfull or unsuccessful attempt, it shifts
the pattern exactly one position to the right. The time complexity of this searching phase
is O(mn). The expected number of text character comparisons is 2n.
Here 'n' is the size of the string in which the substring of size 'm' is being searched
for.
Here is some code (which works!)
#include<stdio.h>
void BruteForce(char *x /* pattern */, int m /* length of the pattern */, char *y /* actual
string being searched */, int n /* length of this string */)

{
int i, j;
printf("\nstring :[%s]""\nlength :[%d]" "\npattern :[%s]""\nlength :[%d]\n\n",
y,n,x,m);
/* Searching */
for (j = 0; j <= (n - m); ++j)
{
for (i = 0; i < m && x[i] == y[i + j]; ++i);
if (i >= m) {printf("\nMatch found at\n\n->[%d]\n->[%s]\n",j,y+j);}
}
}
int main()
{
char *string = "hereroheroero";
char *pattern = "hero";
BF(pattern,strlen(pattern),string,strlen(string));
printf("\n\n");
return(0);
}
This is how the comparison happens visually
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
|||| ----> Match!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
Method2
The second method is called the Rabin-Karp method.
Instead of checking at each position of the text if the pattern occurs or not, it is better to
check first if the contents of the current string "window" looks like the pattern or not. In
order to check the resemblance between these two patterns, a hashing function is used.
Hashing a string involves computing a numerical value from the value of its characters
using a hash function.
The Rabin-Karp method uses the rule that if two strings are equal, their hash values must
also be equal. Note that the converse of this statement is not always true, but a good hash
function tries to reduce the number of such hash collisions. Rabin-Karp computes hash
value of the pattern, and then goes through the string computing hash values of all of its
substrings and checking if the pattern's hash value is equal to the substring hash value,
and advancing by 1 character every time. If the two hash values are the same, then the
algorithm verifies if the two string really are equal, rather than this being a fluke of the
hashing scheme. It uses regular string comparison for this final check. Rabin-Karp is an
algorithm of choice for multiple pattern search. If we want to find any of a large number,
say k, fixed length patterns in a text, a variant Rabin-Karp that uses a hash table to check
whether the hash of a given string belongs to a set of hash values of patterns we are
looking for. Other algorithms can search for a single pattern in time order O(n), hence
they will search for k patterns in time order O(n*k). The variant Rabin-Karp will still
work in time order O(n) in the best and average case because a hash table allows to check
whether or not substring hash equals any of the pattern hashes in time order of O(1).
Here is some code (not working though!)
#include<stdio.h>
hashing_function()
{
// A hashing function to compute the hash values of the strings.
....
}
void KarpRabinR(char *x, int m, char *y, int n)
{
int hx, hy, i, j;

printf("\nstring :[%s]""\nlength :[%d]""\npattern :[%s]""\nlength :[%d]\n\n",
y,n,x,m);
/* Preprocessing phase */
Do preprocessing here..
/* Searching */
j = 0;
while (j <= n-m)
{
if (hx == hy && memcmp(x, y + j, m) == 0)
{
// Hashes match and so do the actual strings!
printf("\nMatch found at : [%d]\n",j);
}
hy = hashing_function(y[j], y[j + m], hy);
++j;
}
}
int main()
{
char *string="hereroheroero";
char *pattern="hero";
KarpRabin(pattern,strlen(pattern),string,strlen(string));
printf("\n\n");
return(0);
}
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
|||| ----> Hash values match, so do the strings!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
Method3
The Knuth-Morris-Pratt or the Morris-Pratt algorithms are extensions of the basic
Brute Force algorithm. They use precomputed data to skip forward not by 1 character,
but by as many as possible for the search to succeed.
Here is some code
void preComputeData( char *x, int m, int Next[] )
{
int i, j;
i = 0;
j = Next[0] = -1;
while ( i < m )
{
while ( j > -1 && x[i] != x[j] )
j = Next[j];
Next[++i] = ++j;
}
}
void MorrisPrat(char *x, int m, char *y, int n)
{
int i, j, Next[1000];
/* Preprocessing */
preComputeData( x, m, Next );
/* Searching */
i = j = 0;
while (j < n)
{
while (i > -1 && x[i] != y[j])
i = Next[i];
i++;
j++;
if (i >= m)
{
printf("\nMatch found at : [%d]\n",j - i);
i = Next[i];
}
}
}
int main()
{
char *string="hereroheroero";
char *pattern="hero";
MorrisPrat(pattern,strlen(pattern),string,strlen(string));
printf("\n\n");
return(0);
}
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
!
hero
hereroheroero
|||| ----> Match found!
hero
hereroheroero
!
hero
Method4
The Boyer Moore algorithm is the fastest string searching algorithm. Most editors
use this algorithm.
It compares the pattern with the actual string from right to left. Most other algorithms
compare from left to right. If the character that is compared with the rightmost pattern
symbol does not occur in the pattern at all, then the pattern can be shifted by m positions
behind this text symbol.
The following example illustrates this situation.
Example:
0 1 2 3 4 5 6 7 8 9 ...
abbadabacba
||
babac|
<------ |
|
babac
The comparison of "d" with "c" at position 4 does not match. "d" does not occur in the
pattern. Therefore, the pattern cannot match at any of the positions 0,1,2,3,4, since all
corresponding windows contain a "d". The pattern can be shifted to position 5. The best
case for the Boyer-Moore algorithm happens if, at each search attempt the first compared
character does not occur in the pattern. Then the algorithm requires only O(n/m)
comparisons .
Bad character heuristics
This method is called bad character heuristics. It can also be applied if the bad character
(the character that causes a mismatch), occurs somewhere else in the pattern. Then the
pattern can be shifted so that it is aligned to this text symbol. The next example illustrates
this situation.
Example:
0 1 2 3 4 5 6 7 8 9 ...
abbababacba
|
babac
<---|
babac
Comparison between "b" and "c" causes a mismatch. The character "b" occurs in the
pattern at positions 0 and 2. The pattern can be shifted so that the rightmost "b" in the
pattern is aligned to "b".
Good suffix heuristics
Sometimes the bad character heuristics fails. In the following situation the comparison
between "a" and "b" causes a mismatch. An alignment of the rightmost occurence of the
pattern symbol a with the text symbol a would produce a negative shift. Instead, a shift by
1 would be possible. However, in this case it is better to derive the maximum possible
shift distance from the structure of the pattern. This method is called good suffix
heuristics.
Example:
0 1 2 3 4 5 6 7 8 9 ...
abaababacba
|||
cabab
<---|||
cabab
The suffix "ab" has matched. The pattern can be shifted until the next occurence of ab in
the pattern is aligned to the text symbols ab, i.e. to position 2.
In the following situation the suffix "ab" has matched. There is no other occurence of
"ab" in the pattern.Therefore, the pattern can be shifted behind "ab", i.e. to position 5.
Example:
0 1 2 3 4 5 6 7 8 9 ...
abcababacba
|||
cbaab
cbaab
In the following situation the suffix "bab" has matched. There is no other occurence of
"bab" in the pattern. But in this case the pattern cannot be shifted to position 5 as before,
but only to position 3, since a prefix of the pattern "ab" matches the end of "bab". We
refer to this situation as case 2 of the good suffix heuristics.
Example:

0 1 2 3 4 5 6 7 8 9 ...
aabababacba
||||
abbab
abbab
The pattern is shifted by the longest of the two distances that are given by the bad
character and the good suffix heuristics.
The Boyer-Moore algorithm uses two different heuristics for determining the maximum
possible shift distance in case of a mismatch: the "bad character" and the "good suffix"
heuristics. Both heuristics can lead to a shift distance of m. For the bad character
heuristics this is the case, if the first comparison causes a mismatch and the
corresponding text symbol does not occur in the pattern at all. For the good suffix
heuristics this is the case, if only the first comparison was a match, but that symbol does
not occur elsewhere in the pattern.
A lot of these algorithms have been explained here <http://www-igm.univmlv.fr/~lecroq/string/node1.html> with good visualizations. Remember, again that its
sufficient to know the basic Brute force algorithm and be aware of the other methods. No
one expects you to know every possible algorithm on earth.
19.Write your own printf() function in C
This is again one of the most frequently asked interview questions. Here is a C program
which implements a basic version of printf(). This is a really, really simplified version of
printf(). Note carefully how floating point and other compilcated support has been left
out. Also, note how we use low level puts() and putchar(). Dont make a fool of yourself
by using printf() within the implementation of printf()!
#include<stdio.h>
#include<stdarg.h>
main()
{
void myprintf(char *,...);
char * convert(unsigned int, int);
int i=65;
char str[]="This is my string";
myprintf("\nMessage = %s%d%x",str,i,i);
}
void myprintf(char * frmt,...)
{
char *p;

int i;
unsigned u;
char *s;
va_list argp;
va_start(argp, fmt);
p=fmt;
for(p=fmt; *p!='\0';p++)
{
if(*p=='%')
{
putchar(*p);
continue;
}
p++;
switch(*p)
{
case 'c' :
i=va_arg(argp,int);
putchar(i);
break;
case 'd' :
i=va_arg(argp,int);
if(i<0)
{
i=-i;
putchar('-');
}
puts(convert(i,10));
break;
case 'o':
i=va_arg(argp,unsigned int);
puts(convert(i,8));
break;
case 's':
s=va_arg(argp,char *);

puts(s);
break;
case 'u':
u=va_arg(argp,argp, unsigned int);
puts(convert(u,10));
break;
case 'x':
u=va_arg(argp,argp, unsigned int);
puts(convert(u,16));
break;
case '%':
putchar('%');
break;
}
}
va_end(argp);
}
char *convert(unsigned int, int)
{
static char buf[33];
char *ptr;
ptr = &buf[ sizeof ( buff ) - 1 ];
*ptr = '\0' ;
do
{
*--ptr = "0123456789abcdef"[ num % base ] ;
num /= base;
}while ( num != 0 );
return( ptr );
}
20.Implement the strcpy() function.
Here are some C programs which implement the strcpy() function. This is one of the most
frequently asked C interview questions.
Method1

char *mystrcpy( char *dst, const char *src )

{
char *ptr;
ptr = dst;
while( *dst++ = *src++ ) ;
return ( ptr );
}
The strcpy function copies src, including the terminating null character, to the location
specified by dst. No overflow checking is performed when strings are copied or
appended. The behavior of strcpy is undefined if the source and destination strings
overlap. It returns the destination string. No return value is reserved to indicate an error.
Note that the prototype of strcpy as per the C standards is
char *strcpy(char *dst, const char *src);
Notice the const for the source, which signifies that the function must not change the
source string in anyway!.
Method2
char *my_strcpy(char dest[], const char source[])
{
int i = 0;
while (source[i] != '\0')
{
dest[i] = source[i];
i++;
}
dest[i] = '\0';
return(dest);
}
Simple, isn't it?
21.Implement the strcmp(str1, str2) function.
There are many ways one can implement the strcmp() function. Note that strcmp
(str1,str2) returns a -ve number if str1 is alphabetically above str2, 0 if both are equal and
+ve if str2 is alphabetically above str1.
Here are some C programs which implement the strcmp() function. This is also
one of the most frequently asked interview questions. The prototype of strcmp() is
int strcmp( const char *string1, const char *string2 );
Here is some C code..

#include <stdio.h>
int mystrcmp(const char *s1, const char *s2);
int main()
{
printf("\nstrcmp() = [%d]\n", mystrcmp("A","A"));
printf("\nstrcmp() = [%d]\n", mystrcmp("A","B"));
printf("\nstrcmp() = [%d]\n", mystrcmp("B","A"));
return(0);
}
int mystrcmp(const char *s1, const char *s2)
{
while (*s1==*s2)
{
if(*s1=='\0')
return(0);
s1++;
s2++;
}
return(*s1-*s2);
}
And here is the output...
strcmp() = [0]
strcmp() = [-1]
strcmp() = [1]
22.Implement the substr() function in C.
Here is a C program which implements the substr() function in C.
int main()
{
char str1[] = "India";
char str2[25];
substr(str2, str1, 1, 3);
printf("\nstr2 : [%s]", str2);
return(0);
}
substr(char *dest, char *src, int position, int length)
{
dest[0]='\0';
strncat(dest, (src + position), length);
}
23.Write your own copy() function
Here is some C code that simulates a file copy action.
#include <stdio.h>
/* standard I/O routines. */
#define MAX_LINE_LEN 1000 /* maximum line length supported. */

void main(int argc, char* argv[])
{
char* file_path_from;
char* file_path_to;
FILE* f_from;
FILE* f_to;
char buf[MAX_LINE_LEN+1];
file_path_from = "<something>";
file_path_to = "<something_else>";
f_from = fopen(file_path_from, "r");
if (!f_from)
{
exit(1);
}
f_to = fopen(file_path_to, "w+");
if (!f_to) {exit(1);}
/* Copy source to target, line by line. */
while (fgets(buf, MAX_LINE_LEN+1, f_from))
{
if (fputs(buf, f_to) == EOF)
{
exit(1);
}
}
if (!feof(f_from))
{
exit(1);
}
if (fclose(f_from) == EOF)
{
exit(1);
}
if (fclose(f_to) == EOF)
{
exit(1);
}
return(0);
}

24.Write C programs to implement the toupper() and the isupper() functions

toUpper()
int toUpper(int ch)
{
if(ch>='a' && c<='z')
return('A' + ch - 'a');
else
return(ch);
}
isUpper()
int isUpper(int ch)
{
if(ch>='A' && ch <='Z')
return(1); //Yes, its upper!
else
return(0); // No, its lower!
}
Its important to know that the upper and lower case alphabets have corresponding integer
values.
A-Z - 65-90
a-z - 97-122
Another way to do this conversion is to maintain a correspondance between the upper and
lower case alphabets. The program below does that. This frees us from the fact that these
alphabets have a corresponding integer values. I dont know what one should do for nonenglish alphabets. Do other languages have upper and lower case letters in the first
place :) !
#include <string.h>
#define UPPER "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
#define LOWER "abcdefghijklmnopqrstuvwxyz"
int toUpper(int c)
{
const char *upper;
const char *const lower = LOWER;
// Get the position of the lower case alphabet in the LOWER string using the
strchr() function ..
upper = ( ((CHAR_MAX >= c)&&(c > '\0')) ? strchr(lower, c) : NULL);
// Now return the corresponding alphabet at that position in the UPPER string ..
return((upper != NULL)?UPPER[upper - lower] : c);
}
Note that these routines dont have much error handling incorporated in them. Its really
easy to add error handling to these routines or just leave it out (as I like it). This site
consciously leaves out error handling for most of the programs to prevent unwanted
clutter and present the core logic first.
25.Write a C program to implement your own strdup() function.
Here is a C program to implement the strdup() function.
char *mystrdup(char *s)
{
char *result = (char*)malloc(strlen(s) + 1);
if (result == (char*)0)
{
return (char*)0;
}
strcpy(result, s);
return result;
}
26.Write a C program to implement the strlen() function
The prototype of the strlen() function is...
size_t strlen(const char *string);
Here is some C code which implements the strlen() function....

int my_strlen(char *string)
{
int length;
for (length = 0; *string != '\0', string++)
{
length++;
}
return(length);
}
Also, see another example
int my_strlen(char *s)
{
char *p=s;
while(*p!='\0')
p++;
return(p-s);
}
27.Write a C program to swap two variables without using a temporary variable
This questions is asked almost always in every interview.
The best way to swap two variables is to use a temporary variable.
int a,b,t;
t = a;
a = b;
b = t;
There is no way better than this as you will find out soon. There are a few slick
expressions that do swap variables without using temporary storage. But they come with
their own set of problems.
Method1 (The XOR trick)

a ^= b ^= a ^= b;
Although the code above works fine for most of the cases, it tries to modify variable 'a'
two times between sequence points, so the behavior is undefined. What this means is it
wont work in all the cases. This will also not work for floating-point values. Also, think
of a scenario where you have written your code like this
swap(int *a, int *b)
{
*a ^= *b ^= *a ^= *b;
}
Now, if suppose, by mistake, your code passes the pointer to the same variable to this
function. Guess what happens? Since Xor'ing an element with itself sets the variable to
zero, this routine will end up setting the variable to zero (ideally it should have swapped
the variable with itself). This scenario is quite possible in sorting algorithms which
sometimes try to swap a variable with itself (maybe due to some small, but not so fatal
coding error). One solution to this problem is to check if the numbers to be swapped are
already equal to each other.
swap(int *a, int *b)
{
if(*a!=*b)
{
*a ^= *b ^= *a ^= *b;
}
}
Method2
This method is also quite popular
a=a+b;
b=a-b;
a=a-b;
But, note that here also, if a and b are big and their addition is bigger than the size of an
int, even this might end up giving you wrong results.

Method3
One can also swap two variables using a macro. However, it would be required to pass
the type of the variable to the macro. Also, there is an interesting problem using macros.
Suppose you have a swap macro which looks something like this
#define swap(type,a,b) type temp;temp=a;a=b;b=temp;
Now, think what happens if you pass in something like this
swap(int,temp,a) //You have a variable called "temp" (which is quite possible).
This is how it gets replaced by the macro
int temp;
temp=temp;
temp=b;
=temp;
Which means it sets the value of "b" to both the variables!. It never swapped them! Scary,
isn't it?
So the moral of the story is, dont try to be smart when writing code to swap variables.
Use a temporary variable. Its not only fool proof, but also easier to understand and
maintain.
29.Write a C program to print a square matrix helically.
Here is a C program to print a matrix helically. Printing a matrix helically means printing
it in this spiral fashion
>-----------+
|
+---->--+ |
|
| |
| |
| <---+ |
|
+-----------+
This is a simple program to print a matrix helically.
#include<stdio.h>

/* HELICAL MATRIX */
int main()
{
int arr[][4] = {
{1,2,3,4},
{5,6,7,8},
{9,10,11,12},
{13, 14, 15, 16}
};
int i, j, k,middle,size;
printf("\n\n");
size = 4;
for(i=size-1, j=0; i>0; i--, j++)
{
for(k=j; k<i; k++)
printf("%d ", arr[j][k]);
for(k=j; k<i; k++)
printf("%d ", arr[k][i]);
for(k=i; k>j; k--)
printf("%d ", arr[i][k]);
for(k=i; k>j; k--)
printf("%d ", arr[k][j]);
}
middle = (size-1)/2;
if (size % 2 == 1) printf("%d", arr[middle][middle]);
printf("\n\n");
return 1;

}
30.Write a C program to reverse a string
There are a number of ways one can reverse strings. Here are a few of them. These should
be enough to impress the interviewer! The methods span from recursive to non-recursive
(iterative).
Also note that there is a similar question about reversing the words in a sentence, but still
keeping the words in place. That is
I am a good boy
would become
boy good a am I
This is dealt with in another question. Here I only concentrate on reversing strings. That
is
I am a good boy
would become
yob doog a ma I
Here are some sample C programs to do the same
Method1 (Recursive)
#include <stdio.h>
static char str[]="STRING TO REVERSE";
int main(int argc, char *argv)
{
printf("\nOriginal string : [%s]", str);
// Call the recursion function
reverse(0);
printf("\nReversed string : [%s]", str);
return(0);
}
int reverse(int pos)
{
// Here I am calculating strlen(str) everytime.

// This can be avoided by doing this computation
// earlier and storing it somewhere for later use.
if(pos< (strlen(str)/2) )
{
char ch;
// Swap str[pos] and str[strlen(str)-pos-1]
ch = str[pos];
str[pos]=str[strlen(str)-pos-1];
str[strlen(str)-pos-1]=ch;
// Now recurse!
reverse(pos+1);
}
}
Method2
#include <stdio.h>
#include <malloc.h>
#include <string.h>
void ReverseStr ( char *buff, int start, int end )
{
char tmp ;
if ( start >= end )
{
printf ( "\n%s\n", buff );
return;
}
tmp = *(buff + start);
*(buff + start) = *(buff + end);

*(buff + end) = tmp ;
ReverseStr (buff, ++start, --end );
}
int main()
{
char buffer[]="This is Test";
ReverseStr(buffer,0,strlen(buffer)-1);
return 0;
}
Method3
public static String reverse(String s)
{
int N = s.length();
if (N <= 1)
return s;
String left = s.substring(0, N/2);
String right = s.substring(N/2, N);
return reverse(right) + reverse(left);
}
Method4
for(int i = 0, j = reversed.Length - 1; i < j; i++, j--)
{
char temp = reversed[i];
reversed[i] = reversed[j];
reversed[j] = temp;
}
return new String(reversed);

Method5
{
int N = s.length();
String reverse = "";
for (int i = 0; i < N; i++)
reverse = s.charAt(i) + reverse;
return reverse;
}
Method6
{
int N = s.length();
char[] a = new char[N];
for (int i = 0; i < N; i++)
a[i] = s.charAt(N-i-1);
String reverse = new String(a);
return reverse;
}
Isn't that enough?
31.Write a C program to reverse the words in a sentence in place.
That is, given a sentence like this
I am a good boy
The in place reverse would be
boy good a am I
Method1
First reverse the whole string and then individually reverse the words
I am a good boy
<------------->
yob doog a ma I
<-> <--> <-> <-> <->
boy good a am I
Here is some C code to do the same ....
/*
Algorithm..
1. Reverse whole sentence first.
2. Reverse each word individually.
All the reversing happens in-place.
*/
#include <stdio.h>
void rev( char *l, char *r ) ;
int main( int argc, char *argv[] )
{
char buf[] = "the world will go on forever";
char *end, *x, *y;
// Reverse the whole sentence first..
for( end = buf ; *end ; end++ ) ;
rev( buf , end - 1 ) ;
// Now swap each word within sentence...
x = buf-1;
y = buf;
while( x++ < end )
{
if( *x == '\0' || *x == ' ' )

{
rev( y , x - 1 ) ;
y=x+1;
}
}
// Now print the final string....
printf("%s\n",buf ) ;
return( 0 ) ;
}
// Function to reverse a string in place...
void rev( char *l , char *r )
{
char t;
while ( l < r )
{
t
= *l ;
*l++ = *r ;
*r-- = t;
}
}
Method2
Another way to do it is, allocate as much memory as the input for the final output. Start
from the right of the string and copy the words one by one to the output.
Input : I am a good boy
<-<------<---------
<-----------<-------------Output : boy
: boy good
: boy good a
: boy good a am
: boy good a am I
The only problem to this solution is the extra space required for the output and one has to
write this code really well as we are traversing the string in the reverse direction and there
is no null at the start of the string to know we have reached the start of the string!. One
can use the strtok() function to breakup the string into multiple words and rearrange them
in the reverse order later.
Method3
Create a linked list like
+---+ +----------+ +----+ +----------+
+---+ +----------+
| I | -> | <spaces> | -> | am | -> | <spaces> | -> | a | -> | <spaces> | --+

+---+ +----------+ +----+ +----------+
+---+ +----------+ |
|
|
+-------------------------------------------------------------------------+
|
|
+------+ +----------+ +-----+ +------+
+---> | good | -> | <spaces> | -> | boy | -> | NULL |

+------+ +----------+ +-----+
+------+
Now its a simple question of reversing the linked list!. There are plenty of algorithms to
reverse a linked list easily. This also keeps track of the number of spaces between the
words. Note that the linked list algorithm, though inefficient, handles multiple spaces
between the words really well.
I really dont know what is the use of reversing a string or a sentence like this!, but its still
asked. Can someone tell me a really practical application of this? Please!
32.Write a C program generate permutations.
Iterative C program
#include <stdio.h>
#define SIZE 3
int main( char *argv [] , int argc )
{
char list[3] = { 'a' , 'b' , 'c' };
int i , j , k ;
for( i = 0 ; i < SIZE ; i++ )
for( j = 0 ; j < SIZE ; j++ )
for( k = 0 ; k < SIZE ; k++ )
if( i != j && j != k && i != k )
printf("%c%c%c\n", list[i],list[j],list[k] );
return ( 0 ) ;
}
Recursive C program
#include <stdio.h>
#define N 5
int main( char *argv[] , int argc )
{
char list[5] = { 'a' , 'b' , 'c' , 'd' , 'e' };
permute( list , 0 , N );
return( 0 );
}
void permute( char list[] , int k , int m )
{
int i;
char temp;
if( k == m )
{
/* PRINT A FROM k to m! */
for( i = 0 ; i < N ; i++ )
{
printf("%c",list[ i ] );
}
printf("\n");
}
else
{
for( i = k ; i < m ; i++ )
{
/* swap(a[i],a[m-1]); */
temp = list[ i ] ;
list[i] = list[ m - 1] ;
list[ m - 1 ] = temp ;
permute( list , k , m -1 ) ;
/* swap(a[m-1],a[i]); */
temp = list[ m -1] ;
list[ m - 1 ] = list[ i ];
list[ i ] = temp;
}
}
}
33.Write a C program for calculating the factorial of a number
Here is a recursive C program
fact( int n )
{
int fact ;
if ( n == 1 )
return ( 1 ) ;
else
fact = n * fact ( n - 1 ) ;
return ( fact ) ;
}
Please note that there is no error handling added to this function (to check if n is negative
or 0. Or if n is too large for the system to handle). This is true for most of the answers in
this website. Too much error handling and standard compliance results in a lot of clutter
making it difficult to concentrate on the crux of the solution. You must ofcourse add as
much error handling and comply to the standards of your compiler when you actually
write the code to implement these algorithms.
34.Write a C program to calculate pow(x,n)?
There are again different methods to do this in C
Brute force C program
int pow( int x , int y )
{
if( y == 1)
return x ;
return x * pow ( x , y - 1 ) ;
}
Divide and Conquer C program
#include <stdio.h>
int main( int argc , char *argv[] )
{
printf("\n[%d]\n",pow(5,4));
}
int pow(int x, int n)
{
if ( n == 0 )
return ( 1 ) ;
else if ( n % 2 == 0 )
{
return ( pow ( x , n / 2 ) * pow ( x , ( n / 2 ) ) ) ;
}
else
{
return ( x * pow ( x , n / 2 ) * pow ( x , ( n / 2 ) ) ) ;
}
}
Also, the code above can be optimized still by calculating pow(z, (n/2)) only one time
(instead of twice) and using its value in the two return() expressions above.
35.Write a C program which does wildcard pattern matching algorithm
Here is an example C program...
#include<stdio.h>
#define TRUE 1
#define FALSE 0
int wildcard( char *string , char *pattern ) ;
int main( )
{
char *string = "hereheroherr" ;
char *pattern = "*hero*" ;
if ( wildcard ( string , pattern ) == TRUE )
{
printf("\nMatch Found!\n");
}
else
{
printf("\nMatch not found!\n");
}
return( 0 ) ;
}
int wildcard(char *string, char *pattern)
{
while( *string )
{
switch( *pattern )
{
case '*':
do
{
++pattern;
}while ( *pattern == '*' ) ;
if( !*pattern )
return ( TRUE ) ;
while(*string)
{
if ( wildcard ( pattern , string++) == TRUE )
return( TRUE );
}
return( FALSE ) ;
default :
if( *string != *pattern )
return(FALSE);
break;
}
++pattern;
++string;
}
while ( *pattern == '* ')
++pattern ;
return !*pattern ;
}
36.How do you calculate the maximum subarray of a list of numbers?
This is a very popular question
You are given a large array X of integers (both positive and negative) and you need to
find the maximum sum found in any contiguous subarray of X.
Example X = [11, -12, 15, -3, 8, -9, 1, 8, 10, -2]
Answer is 30.
There are various methods to solve this problem, some are listed below
Brute force
maxSum = 0
for L = 1 to N
{
for R = L to N
{
sum = 0
for i = L to R
{
sum = sum + X[i]

}
maxSum = max(maxSum, sum)
}
}
O(N^3)
Quadratic
Note that sum of [L..R] can be calculated from sum of [L..R-1] very easily.
maxSum = 0
for L = 1 to N
{
sum = 0
for R = L to N
{
sum = sum + X[R]
maxSum = max(maxSum, sum)
}
}
Using divide-and-conquer
O(N log(N))
maxSum(L, R)
{
if L > R then
return 0
if L = R then
return max ( 0, X[ L ] )
M=(L+R)/2
sum = 0 ; maxToLeft = 0
for i = M downto L do
{
sum = sum + X[ i ]
maxToLeft = max ( maxToLeft, sum )
}
sum = 0; maxToRight = 0
for i = M to R do
{
sum = sum + X[i]
maxToRight = max ( maxToRight , sum )
}
maxCrossing = maxLeft + maxRight;
maxInA = maxSum( L , M )
maxInB = maxSum( M+1 , R )
return max ( maxCrossing , maxInA , maxInB )
}
Here is working C code for all the above cases
#include<stdio.h>
#define N 10
int maxSubSum(int left, int right);
int list[N] = {11, -12, 15, -3, 8, -9, 1, 8, 10, -2};
int main()
{
int i , j , k ;
int maxSum , sum ;
/*---------------------------------------
* CUBIC - O(n*n*n)
*---------------------------------------*/
maxSum = 0;
for( i = 0 ; i < N ; i++ )
{
for( j = i ; j < N ; j++ )
{
sum = 0 ;
for( k = i ; k < j ; k++ )
{
sum = sum + list[k];
}
maxSum = ( maxSum > sum ) ? maxSum : sum ;
}
}
printf("\nmaxSum = [%d]\n", maxSum);
/*------------------------------------* Quadratic - O(n*n)
* ------------------------------------ */
maxSum = 0;
for( i = 0 ; i < N ; i++ )
{
sum=0;
for( j = i ; j < N ; j++ )
{
sum = sum + list[j];
maxSum = ( maxSum > sum ) ? maxSum : sum;
}
}
printf("\nmaxSum = [%d]\n", maxSum);
/*---------------------------------------* Divide and Conquer - O(nlog(n))
* -------------------------------------- */
printf("\nmaxSum : [%d]\n", maxSubSum(0,9));
return ( 0 ) ;
}
int maxSubSum(int left, int right)
{
int mid , sum , maxToLeft , maxToRight , maxCrossing , maxInA , maxInB ;
int i ;
if ( left > right )
{
return 0;
}
if ( left == right )
{
return ( ( 0 > list[ left ] ) ? 0 : list[left] ) ;
}
mid = (left + right)/2;
sum=0;
maxToLeft=0;
for( i = mid ; i >= left ; i-- )
{
sum = sum + list[i] ;
maxToLeft = ( maxToLeft > sum ) ? maxToLeft : sum ;

}
sum=0;
maxToRight=0;
for( i = mid + 1 ; i <= right ; i++ )
{
sum = sum + list[i];
maxToRight = ( maxToRight > sum ) ? maxToRight : sum ;
}
maxCrossing = maxToLeft + maxToRight ;
maxInA = maxSubSum ( left , mid ) ;
maxInB = maxSubSum ( mid + 1, right ) ;
return( ( ( maxCrossing > maxInA ) ? maxCrossing:maxInA ) > maxInB ?
( ( maxCrossing > maxInA ) ?maxCrossing:maxInA ) : maxInB ) ;
}
Note that, if the array has all negative numbers, then this code will return 0. This is wrong
because it should return the maximum sum, which is the least negative integer in the
array. This happens because we are setting maxSum to 0 initially. A small change in this
code can be used to handle such cases.
37. How to generate fibonacci numbers? How to find out if a given number is a
fibonacci number or not? Write C programs to do both.
Lets first refresh ourselves with the Fibonacci sequence
1, 1, 2, 3, 5, 8, 13, 21, 34, 55, .....
Fibonacci numbers obey the following rule
F(n) = F(n-1) + F(n-2)
Here is an iterative way to generate fibonacci numbers and also return the nth number.
int fib( int n )
{
int f[n+1];
f[1] = f[2] = 1;
printf("\nf[1] = %d", f[1]);
printf("\nf[2] = %d", f[2]);
for ( int i = 3 ; i <= n ; i++ )
{
f[i] = f[i-1] + f[i-2];
printf("\nf[%d] = [%d]",i,f[i]);
}
return f[n];
}
Here is a recursive way to generate fibonacci numbers.
int fib(int n)
{
if ( n <= 2 )
return 1;
else
return fib(n-1) + fib(n-2);
}
Here is an iterative way to just compute and return the nth number (without storing the
previous numbers).
int fib(int n)
{
int a = 1, b = 1;
for ( int i = 3 ; i <= n ; i++ )
{
int c = a + b;
a = b;
b = c;
}
return a;
}
There are a few slick ways to generate fibonacci numbers, a few of them are listed below
Method1
If you know some basic math, its easy to see that
n
[11]
= [ F(n+1) F(n) ]
[10]
[ F(n) F(n-1) ]
or
(f(n) f(n+1)) [ 0 1 ] = (f(n+1) f(n+2))
[11]
or
n
(f(0) f(1)) [ 0 1 ] = (f(n) f(n+1))
[11]
The n-th power of the 2 by 2 matrix can be computed efficiently in O(log n) time. This
implies an O(log n) algorithm for computing the n-th Fibonacci number.
Here is the pseudocode for this
int Matrix[2][2] = {{1,0}{0,1}}
int fib(int n)
{
matrixpower( n - 1 ) ;
return Matrix[0][0] ;
}
void matrixpower(int n)
{
if ( n > 1 )
{
matrixpower( n / 2 ) ;
Matrix = Matrix * Matrix ;
}
if (n is odd)
{
Matrix = Matrix * {{1,1}{1,0}}
}
}
And here is a program in C which calculates fib(n)
#include<stdio.h>
int M[2][2]={{1,0},{0,1}};
int A[2][2]={{1,1},{1,0}};
int C[2][2]={{0,0},{0,0}}; // Temporary matrix used for multiplication.
void matMul(int n);
void mulM(int m);
int main()
{
int n;
n=6;
matMul( n - 1 ) ;
// The nth fibonacci will be stored in M[0][0]
printf("\n%dth Fibonaci number : [%d]\n\n", n, M[0][0]);
return ( 0 );
}
// Recursive function with divide and conquer strategy
void matMul ( int n )
{
if ( n > 1 )
{
matMul ( n / 2 ) ;
mulM ( 0 ) ;
// M * M
}
if( n % 2 != 0 )
{
mulM ( 1 ) ;
// M * {{1,1}{1,0}}
}
}
// Function which does some basic matrix multiplication.
void mulM(int m)
{
int i,j,k;
if ( m == 0 )
{
// C = M * M
for( i = 0 ; i < 2 ; i++ )
for( j = 0 ; j < 2 ; j++ )
{
C[i][j] = 0 ;
for( k = 0 ; k < 2 ; k++ )
C[i][j] += M[i][k] * M[k][j] ;
}
}
else
{
// C = M * {{1,1}{1,0}}
for( i = 0 ; i < 2 ; i++ )
for(j=0;j<2;j++)
{
C[i][j]=0;
for( k = 0 ; k < 2 ; k++ )
C[i][j] += A[i][k] * M[k][j] ;
}
}
// Copy back the temporary matrix in the original matrix M
for( i = 0 ; i < 2 ; i++ )
for( j = 0 ; j < 2 ; j++ )
{
M[i][j] = C[i][j] ;
}
}
Method2
f ( n ) = ( 1 / sqrt ( 5 ) ) * ( ( ( 1 + sqrt ( 5 ) ) / 2 ) ^ n - ( ( 1 - sqrt ( 5 ) ) / 2 ) ^ n )
So now, how does one find out if a number is a fibonacci or not?.
The cumbersome way is to generate fibonacci numbers till this number and see if this
number is one of them. But there is another slick way to check if a number is a fibonacci
number or not.
N is a Fibonacci number if and only if ( 5 * N * N + 4 ) or ( 5 * N * N - 4 ) is a
perfect square!
Dont believe me?
3 is a Fibonacci number since (5*3*3 + 4) is 49 which is 7*7
5 is a Fibonacci number since (5*5*5 - 4) is 121 which is 11*11
4 is not a Fibonacci number since neither (5*4*4 + 4) = 84 nor (5*4*4 - 4) = 76 are

perfect squares.
To check if a number is a perfect square or not, one can take the square root, round it to
the nearest integer and then square the result. If this is the same as the original whole
number then the original was a perfect square.
39.What Little-Endian and Big-Endian? How can I determine whether a machine's
byte order is big-endian or little endian? How can we convert from one to another?
First of all, Do you know what Little-Endian and Big-Endian mean?
Little Endian means that the lower order byte of the number is stored in memory at the
lowest address, and the higher order byte is stored at the highest address. That is, the little
end comes first.
For example, a 4 byte, 32-bit integer
Byte3 Byte2 Byte1 Byte0 will be arranged in memory as follows:
Base_Address+0 Byte0
Intel processors use "Little Endian" byte order.
"Big Endian" means that the higher order byte of the number is stored in memory at the
lowest address, and the lower order byte at the highest address. The big end comes first.
Motorola, Solaris processors use "Big Endian" byte order.
In "Little Endian" form, code which picks up a 1, 2, 4, or longer byte number proceed in
the same way for all formats. They first pick up the lowest order byte at offset 0 and
proceed from there. Also, because of the 1:1 relationship between address offset and byte
number (offset 0 is byte 0), multiple precision mathematic routines are easy to code. In
"Big Endian" form, since the high-order byte comes first, the code can test whether the
number is positive or negative by looking at the byte at offset zero. Its not required to
know how long the number is, nor does the code have to skip over any bytes to find the
byte containing the sign information. The numbers are also stored in the order in which
they are printed out, so binary to decimal routines are particularly efficient.
Here is some code to determine what is the type of your machine

int num = 1;
if ( * ( char * ) &num == 1 )
{
printf("\nLittle-Endian\n");
}
else
{
printf("Big-Endian\n");
}
And here is some code to convert from one Endian to another.
int myreversefunc( int num )
{
int byte0, byte1, byte2, byte3;
byte0 = ( num & x000000FF ) >> 0 ;
byte1 = ( num & x0000FF00 ) >> 8 ;
byte2 = ( num & x00FF0000 ) >> 16 ;
byte3 = ( num & xFF000000 ) >> 24 ;
return ( ( byte0 << 24 ) | ( byte1 << 16 ) | ( byte2 << 8 ) | ( byte3 << 0 ) ) ;
}
40.Write C code to solve the Tower of Hanoi problem.
Here is an example C program to solve the Tower Of Hanoi problem...
main()
{
towers_of_hanio( n , 'L' , 'R' , 'C' ) ;
}
towers_of_hanio ( int n , char from , char to , char temp )
{
if ( n > 0 )
{
tower_of_hanio ( n-1, from , temp , to ) ;
printf("\nMove disk %d from %c to %c\n", n, from, to);
tower_of_hanio ( n-1, temp , to , from ) ;
}
}
41.Write C code to return a string from a function
This is one of the most popular interview questions
This C program wont work!
char *myfunction( int n )
{
char buffer[20];
sprintf(buffer, "%d", n);
return retbuf;
}
This wont work either!
char *myfunc1( )
{
char temp[] = "string";
return temp;
}
char *myfunc2( )
{
char temp[] = { 's', 't', 'r', 'i', 'n', 'g', '\0' };
return temp;

}
int main( )
{
puts ( myfunc1( ) ) ;
puts ( myfunc2( ) );
}
The returned pointer should be to a static buffer (like static char buffer[20];), or to a
buffer passed in by the caller function, or to memory obtained using malloc(), but not to a
local array.
This will work
char *myfunc( )
{
char *temp = "string";
return temp;
}
int main()
{
puts ( someFun ( ) ) ;
}
So will this
calling_function ( )
{
char *string;
return_string( &string );
printf(?\n[%s]\n?, string);
}
boolean return_string (char **mode_string /* Pointer to a pointer! */ )
{
*string = (char *) malloc ( 100 * sizeof ( char ) ) ;

DISCARD strcpy ( (char *) *string , ( char * ) ? Something ? ) ;
}
42.Write a C program which produces its own source code as its output
This is one of the most famous interview questions
One of the famous C programs is...
char *s = "char *s = %c%s%c ; main( ) { printf ( s , 34 , s , 34 ) ; } " ; main( ){ printf
( s ,34 , s , 34 ) ; }
So how does it work?
It's not difficult to understand this program. In the following statement,
printf ( f , 34 , f , 34 ,10 ) ;
the parameter "f" not only acts as the format string, but also as a value for the %s
specifier. The ASCII value of double quotes is 34, and that of new-line is 10. With these
fact ready, the solution is just a matter of tracing the program.
43.Write a C progam to convert from decimal to any base (binary, hex, oct etc...)
Here is some really cool C code
#include <stdio.h>
int main()
{
decimal_to_anybase( 10, 2 );
decimal_to_anybase( 255, 16 );
getch();
}
decimal_to_anybase ( int n , int base )
{
int i , m , digits[1000] , flag ;
i=0;

printf("\n\n[%d] converted to base [%d] : ", n, base);

while ( n )
{
m = n % base ;
digits[ i ] = "0123456789abcdefghijklmnopqrstuvwxyz" [ m ] ;
n = n / base ;
i++ ;
}
//Eliminate any leading zeroes
for( i-- ; i >= 0 ; i-- )
{
if ( !flag && digits[i] != '0' )
flag=1;
if ( flag )
printf("%c",digits[i]);
}
}
44.Write C code to check if an integer is a power of 2 or not in a single line?
Even this is one of the most frequently asked interview questions. I really dont know
whats so great in it. Nevertheless, here is a C program
Method1
if ( ! ( num & ( num - 1 ) ) && num )
{
// Power of 2!
}
Method2
if ( ( ( ~i + 1 ) & i ) == i )
{
//Power of 2!
}
I leave it up to you to find out how these statements work.
45.Write a C program to find the GCD of two numbers
int gcd(int a, int b)
{
int temp;
while(b)
{
temp = a % b ;
a = b;
b = temp;
}
return(a);
}
// Recursive algorithm
int gcd_recurse( int a , int b )
{
int temp;
temp = a % b ;
if (temp == 0)
{
return ( b ) ;
}
else
{
return ( gcd_recurse ( b, temp ) ) ;
}
}
And here is the output ...
Iterative
---------------GCD( 6, 4) = [2]
GCD( 4, 6) = [2]
GCD( 3,17) = [1]
GCD(17, 3) = [1]
GCD( 1, 6) = [1]
GCD(10, 1) = [1]
GCD(10, 6) = [2]
46.Finding a duplicated integer problem
This questions will be answered soon
48.Find the maximum of three integers using the ternary operator.
Here is how you do it
max = ( ( a > b ) ? ( ( a > c ) ? a : c ) : ( ( b > c ) ? b : c ) ) ;
Here is another way
max = ( ( a > b ) ? a : b ) > c ? ( ( a > b ) ? a : b ) : c ;
Here is some code to find the max of 4 numbers...
Method1
#include <stdio.h>
#include <stdlib.h>
#define max2( x , y ) ( ( x ) > ( y ) ? ( x ) : ( y ) )
#define max4( a , b , c , d ) max2( max2( ( a ) , ( b ) ) , max2( ( c ) , ( d ) ) )
int main ( void )
{

printf ( "Max: %d\n", max4(10,20,30,40));

printf ( "Max: %d\n", max4(10,0,3,4));
return EXIT_SUCCESS;
}
Method2
#include <stdio.h>
#include <stdlib.h>
int retMax( int i1, int i2 , int i3 , int i4 )
{
return( ( ( i1 > i2 ) ? i1 : i2 ) > ( ( i3 > i4 ) ? i3 : i4 ) ? ( ( i1 > i2 ) ? i1 : i2 ) : ( ( i3
> i4 ) ? i3 : i4 ) ) ;
}
int main()
{
int val = 0 ;
val = retMax(10, 200, 10, 530);
val = retMax(9, 2, 5, 7);
return 0;
}
49.How do you initialize a pointer inside a function?
This is one of the very popular interview questions, so take a good look at it!.
myfunction( int *ptr )
{
int myvar = 100;
ptr = &myvar;
}
main( )
{

int *myptr ;
myfunction ( myptr ) ;
//Use pointer myptr.
}
Do you think this works? It does not!.
Arguments in C are passed by value. The called function changed the passed copy of the
pointer, and not the actual pointer.
There are two ways around this problem
Method1
Pass in the address of the pointer to the function (the function needs to accept a pointerto-a-pointer).
calling_function()
{
char *string;
return_string(/* Pass the address of the pointer */&string);
printf(?\n[%s]\n?, string);
}
boolean return_string( char **mode_string /*Pointer to a pointer! */ )
{
*string = (char * ) malloc(100 * sizeof( char ) ) ; // Allocate memory to the pointer
passed, not its copy.
DISCARD strcpy( (char * ) *string , ( char * ) ? Something ? ) ;
}
Method2
Make the function return the pointer.
char *myfunc( )
{
char *temp = "string";
return temp;

}
int main()
{
puts( myfunc( ) );
}
50.Write C code to dynamically allocate one, two and three dimensional arrays
(using malloc())
Its pretty simple to do this in the C language if you know how to use C pointers. Here are
some example C code snipptes....
One dimensional array
int *myarray = malloc(no_of_elements * sizeof(int));
//Access elements as myarray[i]
Two dimensional array
Method1
int **myarray = ( int ** ) malloc( no_of_rows * sizeof( int * ) ) ;
for( i = 0 ; i < no_of_rows ; i++ )
{
myarray[i] = malloc( no_of_columns * sizeof( int ) );
}
// Access elements as myarray[i][j]
Method2 (keep the array's contents contiguous)
int **myarray = ( int ** ) malloc( no_of_rows * sizeof( int * ) );
myarray[0] = malloc(no_of_rows * no_of_columns * sizeof( int ) );
for( i = 1; i < no_of_rows ; i++)
myarray[i] = myarray[0] + ( i * no_of_columns ) ;
// Access elements as myarray[i][j]
Method3
int *myarray = malloc( no_of_rows * no_of_columns * sizeof( int ) ) ;

// Access elements using myarray[ i * no_of_columns + j ].

Three dimensional array
#define MAXX 3
#define MAXY 4
#define MAXZ 5
main()
{
int ***p,i,j;
p=( int *** ) malloc( MAXX * sizeof( int *** ) );
for(i=0;i<MAXX;i++)
{
p[i]=( int ** )malloc( MAXY * sizeof( int * ) );
for( j=0 ; j < MAXY ; j++ )
p[i][j]=( int * ) malloc( MAXZ * sizeof( int ) );
}
for(k=0;k<MAXZ;k++)
for(i=0;i<MAXX;i++)
for(j=0;j<MAXY;j++)
p[i][j][k]= < something > ;
}
51.How would you find the size of structure without using sizeof()?
Try using pointers
struct MyStruct
{
int i;
int j;
};

int main()
{
struct MyStruct *p = 0;
int size = ( ( char * ) ( p + 1 ) ) - ( ( char * ) p ) ;
printf("\nSIZE : [%d]\nSIZE : [%d]\n", size);
return 0;
}
52.Write a C program to multiply two matrices.
Are you sure you know this? A lot of people think they already know this, but guess
what? So take a good look at this C program. Its asked in most of the interviews as a
warm up question.
// Matrix A (m*n)
// Matrix B (n*k)
// Matrix C (m*k)
for(i=0; i<m; i++)
{
for(j=0;j<k;j++)
{
c[i][j] = 0 ;
for( l = 0 ; l < n ; l++ )
c[i][j] += a[i][l] * b[l][j];
}
}
53.Write a C program to check for palindromes.
An example of a palidrome is "avon sees nova"
There a number of ways in which we can find out if a string is a palidrome or not. Here
are a few sample C programs...
Method1
#include <stdio.h>

#include <string.h>
#include <stdlib.h>
#include <ctype.h>
void isPalindrome(char *string);
int main()
{
isPalindrome("avon sees nova");
isPalindrome("a");
isPalindrome("avon sies nova");
isPalindrome("aa");
isPalindrome("abc");
isPalindrome("aba");
isPalindrome("3a2");
exit(0);
}
void isPalindrome( char *string )
{
char *start , *end ;
if( string )
{
start = string;
end = string + strlen(string) - 1;
while( ( *start == *end ) && ( start != end ) )
{
if ( start < end )
start++;
if ( end > start )
end--;
}
if( *start != *end )
{
printf("\n[%s] - This is not a palidrome!\n", string);
}
else
{
printf("\n[%s] - This is a palidrome!\n", string);
}
}
printf("\n\n");
}
Method2
boolean palindrome( char string[] )
{
int count, countback, end, N;
N = strlen ( string ) ;
end = N-1 ;
for( ( count = 0, count <= end ) ; count <= ( end / 2 ) ; ++count ,--countback )
{
if ( string[count] != string[countback] )
{
return( FALSE );
}
}
return(TRUE);

}
54.Write a C program to convert a decimal number into a binary number.
99% of the people who attend interviews can't answer this question, believe me!. Here is
a recursive C program which does this....
#include<stdio.h>
void generatebits(int num);
void generatebits(int num)
{
int temp;
if ( num )
{
temp = num % 2;
generatebits( num >>= 1 ) ;
printf("%d",temp);
}
}
int main()
{
int num;
printf("\nEnter a number\n");
scanf("%d", &num);
printf("\n\n");
generatebits(num);
getch( );
return(0);
}
The reason we have shown a recursive algorithm is that, because of the magic of
recursion, we dont have to reverse the bits generated to produce the final output. One can
always write an iterative algorithm to accomplish the same, but it would require you to
first store the bits as they are generated and then reverse them before producing the final
output.
55.Write C code to implement the Binary Search algorithm.
Here is a C function
int binarySearch( int arr[] , int size , int item )
{
int left , right , middle ;
left = 0;
right = size-1;
while( left <= right )
{
middle = ( ( left + right ) / 2 ) ;
if( item == arr[middle] )
{
return( middle );
}
if( item > arr[middle] )
{
left = middle+1;
}
else
{
right = middle-1;
}
}
return(-1);
}
Note that the Binary Search algorithm has a prerequisite that the array passed to it must
be already sorted in ascending order. This will not work on an unsorted array. The
complexity of this algorithm is O(log(n)).
56.Wite code to evaluate a polynomial.
typedef struct node
{
float cf;
float px;
float py;
struct node *next;
}mynode;
float evaluate(mynode *head)
{
float x,y,sum;
sum = 0;
mynode *poly;
for( poly = head -> next ; poly != head ; poly = poly -> next )
{
sum = sum + poly -> cf * pow( x , poly -> px ) * pow( y, poly -> py ) ;
}
return( sum ) ;
}
57.Write code to add two polynomials
Here is some pseudocode
mynode *polynomial_add(mynode *h1, mynode *h2, mynode *h3)
{
mynode *p1, *p2;
int x1, x2, y1, y2, cf1, cf2, cf;
p1 = h1->next;
while(p1!=h1)
{
x1 = p1->px;
y1 = p1->py;
cf1 = p1->cf;
// Search for this term in the second polynomial
p2 = h2->next;
while(p2 != h2)
{
x2 = p2->px;
y2 = p2->py;
cf2 = p2->cf;
if(x1 == x2 && y1 == y2)
break;
p2 = p2->next;
}
if(p2 != h2)
{
// We found something in the second polynomial.
cf = cf1 + cf2;
p2->flag = 1;
if( cf != 0 ){ h3 = addNode( cf , x1 , y1 , h3 ) ; }
}
else
{
h3=addNode(cf,x1,y1,h3);
}

p1 = p1->next;
}//while
// Add the remaining elements of the second polynomail to the result
while(p2 != h2)
{
if(p2->flag==0)
{
h3=addNode(p2->cf, p2->px, p2->py, h3);
}
p2=p2->next;
}
return(h3);
}
58.Write a program to add two long positive numbers (each represented by linked
lists).
Check out this simple implementation
mynode *long_add(mynode *h1, mynode *h2, mynode *h3)
{
mynode *c, *c1, *c2;
int sum, carry, digit;
carry = 0;
c1 = h1->next;
c2 = h2->next;
while(c1 != h1 && c2 != h2)
{
sum = c1 -> value + c2 -> value + carry ;
digit = sum % 10 ;
carry = sum / 10 ;
h3 = insertNode( digit , h3 );
c1 = c1 -> next ;
c2 = c2 -> next ;
}
if ( c1 != h1 )
{
c = c1;
h = h1;
}
else
{
c = c2;
h = h2;
}
while ( c != h )
{
sum = c -> value + carry ;
digit = sum % 10 ;
carry = sum / 10 ;
h3 = insertNode( digit , h3 );
c = c -> next ;
}
if ( carry == 1 )
{
h3 = insertNode( carry , h3 ) ;
}
return( h3 ) ;

}
59.How do you compare floating point numbers?
This is Wrong!.
double a, b;
if( a == b )
{
...
}
The above code might not work always. Thats because of the way floating point numbers
are stored.
A good way of comparing two floating point numbers is to have a accuracy threshold
which is relative to the magnitude of the two floating point numbers being compared.
#include <math.h>
if ( fabs ( a - b ) <= accurary_threshold * fabs ( a ) )
There is a lot of material on the net to know how floating point numbers can be
compared. Got for it if you really want to understand.
Another way which might work is something like this. I have not tested it!
int compareFloats ( float f1 , float f2 )
{
char *b1, *b2 ;
int i ;
b1 = ( char * ) &f1 ;
b2 = ( char * ) &f2 ;
/* Assuming sizeof(float) is 4 bytes) */
for ( i = 0 ; i < 4 ; i++, b1++, b2++ )
{
if ( *b1 != *b2 )
{
return(NOT_EQUAL); /* You must have defined this before */

}
}
return(EQUAL);
}
60.What's a good way to implement complex numbers in C?
Use structures and some routines to manipulate them.
61.How can I display a percentage-done indication on the screen?
The character '\r' is a carriage return without the usual line feed, this helps to overwrite
the current line. The character '\b' acts as a backspace, and will move the cursor one
position to the left.
62.Write a program to check if a given year is a leap year or not?
Use this if ( ) condition to check if a year is a leap year or not
if ( year % 4 == 0 && ( year % 100 != 0 || year % 400 == 0 ) )
63.Is there something we can do in C but not in C++?
I have a really funny answer
Declare variable names that are keywords in C++ but not C.
#include <stdio.h>
int main( void )
{
int old , new = 3 ;
return 0;
}
This will compile in C, but not in C++!
64.How to swap the two nibbles in a byte ?
Try this
#include <stdio.h>
unsigned char swap_nibbles(unsigned char c)
{
unsigned char temp1, temp2;

temp1 = c & 0x0F;
temp2 = c & 0xF0;
temp1 = temp1 << 4;
temp2 = temp2 >> 4;
return( temp2 | temp1 ) ; //adding the bits
}
int main(void)
{
char ch = 0x34 ;
printf("\nThe exchanged value is %x",swap_nibbles(ch));
return 0;
}
65.How to scan a string till we hit a new line using scanf()?
Use
scanf("%[^\n]", address);
66.Write pseudocode to compare versions (like 115.10.1 vs 115.11.5).
This question is also quite popular, because it has real practical uses, specially during
patching when version comparison is required
The pseudocode is something like
while( both version strings are not NULL )
{
// Extract the next version segment from Version string1.
// Extract the next version segment from Version string2.
// Compare these segments, if they are equal, continue
// to check the next version segments.
// If they are not equal, return appropriate code depending
// on which segment is greater.
}
And here is some code in PL-SQL
--------------------------------------------------------------------compare_versions()
Function to compare releases. Very useful when comparing file versions!
This function compare two versions in pl-sql language. This function can compare
Versions like 115.10.1 vs. 115.10.2 (and say 115.10.2 is greater), 115.10.1 vs. 115.10
(and say
115.10.1 is greater), 115.10 vs. 115.10 (and say both are equal)
--------------------------------------------------------------------function compare_releases(release_1 in varchar2, release_2 in varchar2)
return boolean is
release_1_str varchar2(132);
release_2_str varchar2(132);
release_1_ver number;
release_2_ver number;
ret_status boolean := TRUE;
begin
release_1_str := release_1 || '.';
release_2_str := release_2 || '.';
while release_1_str is not null or release_2_str is not null loop
-- Parse out a current version segment from release_1
if (release_1_str is null) then
release_1_ver := 0;
else
release_1_ver := nvl(to_number(substr(release_1_str,1, instr(release_1_str,'.')-1)),1);
release_1_str := substr(release_1_str,instr(release_1_str,'.')+1);
end if;
-- Next parse out a version segment from release_2
if (release_2_str is null) then
release_2_ver := 0;
else
release_2_ver := nvl(to_number(substr(release_2_str,1, instr(release_2_str,'.')-1)),1);
release_2_str := substr(release_2_str,instr(release_2_str,'.')+1);
end if;
if (release_1_ver > release_2_ver) then
ret_status := FALSE;
exit;
elsif (release_1_ver < release_2_ver) then
exit;
end if;
-- Otherwise continue to loop.
end loop;
return(ret_status);
end compare_releases;
67.How do you get the line numbers in C?
Use the following Macros
__FILE__ Source file name (string constant) format "patx.c"
__LINE__ Current source line number (integer)
__DATE__ Date compiled (string constant)format "Dec 14 1985"
__TIME__ Time compiled (string constant) format "15:24:26"
__TIMESTAMP__ Compile date/time (string constant)format "Tue Nov 19 11:39:12
1997"
Usage example

static char stamp[] = "***\nmodule " __FILE__ "\ncompiled " __TIMESTAMP__

"\n***";
...
int main()
{
...
if ( (fp = fopen(fl,"r")) == NULL )
{
printf( "open failed, line %d\n%s\n",__LINE__, stamp );
exit( 4 );
}
...
}
And the output is something like
*** open failed, line 67
******
module myfile.c
compiled Mon Jan 15 11:15:56 1999
***
68.How to fast multiply a number by 7?
Try
( num << 3 - num )
This is same as
num * 8 - num = num * ( 8 - 1 ) = num * 7
69.Write a simple piece of code to split a string at equal intervals
Suppose you have a big string
This is a big string which I want to split at equal intervals, without caring about the
words.

Now, to split this string say into smaller strings of 20 characters each, try this
#define maxLineSize 20
split( char *string )
{
int i, length;
char dest[maxLineSize + 1];
i = 0;
length = strlen(string);
while( ( i + maxLineSize ) <= length )
{
strncpy( dest , ( string + i ) , maxLineSize ) ;
dest[maxLineSize - 1] = '\0' ;
i = i + strlen( dest ) - 1 ;
printf("\nChunk : [%s]\n", dest);
}
strcpy( dest , ( string + i ) ) ;
printf("\nChunk : [%s]\n", dest);
}
71.How do you find out if a machine is 32 bit or 64 bit?
72.Write a program to have the output go two places at once (to the screen and to a
file also)
You can write a wrapper function for printf() which prints twice.
myprintf( ... )
{
// printf( ) ;
-> To screen.
// write_to_file( ) ; -> To file.

}

A command in shell, called tee does have this functionality!

73.Write code to round numbers
Use something like
( int ) ( num < 0 ? ( num - 0.5 ) : ( num + 0.5 ) )
74.How can we sum the digits of a given number in single statement?

Try something like this
# include<stdio.h>
void main()
{
int num=123456;
int sum=0;
for( ; num > 0 ; sum += num % 10 , num /= 10 ) ; // This is the "single line".
printf("\nsum = [%d]\n", sum);
}
If there is a simpler way to do this, let me know!
75.Given two strings A and B, how would you find out if the characters in B were a
subset of the characters in A?
Try this out
isSubset( char *a , char *b )
{
int letterPresent[256];
int i;
for( i = 0 ; i < 256 ; i++ )
letterPresent[i]=0;
for( i = 0 ; a[i] != '\0' ; i++ )
letterPresent[ a[i] ]++;

for( i = 0 ; b[i] != '\0' ; i++ )

if( letterPresent[ b[i] ] )
return( FALSE );
return( TRUE );
}
76.Write a program to merge two arrays in sorted order, so that if an integer is in
both the arrays, it gets added into the final array only once.
This questions will be answered soon :)
77.Write a program to check if the stack grows up or down
Try noting down the address of a local variable. Call another function with a local
variable declared in it and check the address of that local variable and compare!.
#include <stdio.h>
#include <stdlib.h>
void stack( int *local1 );
int main( )
{
int local1;
stack( &local1 );
exit( 0 );
}
void stack( int *local1 )
{
int local2;
printf("\nAddress of first local : [%u]", local1);
printf("\nAddress of second local : [%u]", &local2);
if( local1 < &local2 )
{
printf("\nStack is growing downwards.\n");

}
else
{
printf("\nStack is growing upwards.\n");
}
printf("\n\n");
}
78.How to add two numbers without using the plus operator?
Actually,
SUM = A XOR B
CARRY = A AND B
On a wicked note, you can add two numbers wihtout using the + operator as follows
a-(-b)
79.How to generate prime numbers? How to generate the next prime after a given
prime?
This is a very vast subject. There are numerous methods to generate primes or to find out
if a given number is a prime number or not. Here are a few of them. I strongly
recommend you to search on the Internet for more elaborate information.
Brute Force
Test each number starting with 2 and continuing up to the number of primes we want to
generate. We divide each numbr by all divisors upto the square root of that number. If no
factors are found, its a prime.
Using only primes as divisors
Test each candidate only with numbers that have been already proven to be prime. To do
so, keep a list of already found primes (probably using an array, a file or bit fields).
Test with odd candidates only
We need not test even candidates at all. We could make 2 a special case and just print it,
not include it in the list of primes and start our candidate search with 3 and increment by
2 instead of one everytime.
Table method
Suppose we want to find all the primes between 1 and 64. We write out a table of these

numbers, and proceed as follows. 2 is the first integer greater than 1, so its obviously
prime. We now cross out all multiples of two. The next number we haven't crossed out is
3. We circle it and cross out all its multiples. The next non-crossed number is 5, sp we
circle it and cross all its mutiples. We only have to do this for all numbers less than the
square root of our upper limit, since any composite in the table must have atleast one
factor less than the square root of the upper limit. Whats left after this process of
elimination is all the prime numbers between 1 and 64.
80.Write a program to print numbers from 1 to 100 without using loops!
Another "Yeah, I am a jerk, kick me! kind of a question. I simply dont know why they ask
these questions.
Nevertheless, for the benefit of mankind...
Method1 (Using recursion)
void printUp(int startNumber, int endNumber)
{
if ( startNumber > endNumber )
return;
printf("[%d]\n", startNumber++);
printUp( startNumber , endNumber ) ;
}
Method2 (Using goto)
void printUp(int startNumber, int endNumber)
{
start:
if ( startNumber > endNumber )
{
goto end;
}
else
{
printf("[%d]\n", startNumber++);
goto start;
}
end:
return;
}
81.Write your own trim() or squeeze() function to remove the spaces from a string.
Here is one version...
#include <stdio.h>
char *trim( char *s ) ;
int main( int argc , char *argv[] )
{
char str1[] = " Hello I am Good " ;
printf("\n\nBefore trimming : [%s]", str1);
printf("\n\nAfter trimming : [%s]", trim(str1));
getch( ) ;
}
// The trim() function...
char *trim( char *s )
{
char *p, *ps;
for ( ps = p = s ; *s != '\0' ; s++ )
{
if ( !isspace( *s ) )
{
*p++ = *s ;
}
}

*p = '\0' ;
return( ps ) ;
}
Before trimming : [ Hello I am Good ]
After trimming : [HelloIamGood]
82.Write your own random number generator function in C.
83.Write your own sqrt() function in C
TREES:
84.Write a C program to find the depth or height of a tree.
Here is some C code to get the height of the three
tree_height( mynode *p )
{
if ( p == NULL )
return( 0 );
if( p -> left )
{
h1=tree_height( p -> left ) ;
}
if ( p => right )
{
h2=tree_height( p -> right ) ;
}
return ( max ( h1 , h2 ) + 1 );
}
The degree of the leaf is zero. The degree of a tree is the max of its element degrees. A
binary tree of height n, h > 0, has at least h and at most (2^h -1) elements in it. The height
of a binary tree that contains n, n>0, elements is at most n and atleast log(n+1) to the base
2.
Log(n+1) to the base 2 = h
n = (2^h - 1)
85.Write a C program to determine the number of elements (or size) in a tree.
Try this C program
int tree_size( struct node* node )
{
if ( node == NULL )
{
return(0);
}
else
{
return ( tree_size ( node -> left ) + tree_size( node -> right ) + 1 ) ;
}
}
86.Write a C program to delete a tree (i.e, free up its nodes)
Free up the nodes using Postorder traversal!.
87.Write C code to determine if two trees are identical
Here is a C program using recursion
int identical( struct node* a , struct node* b )
{
if ( a == NULL && b == NULL )
{
return ( true );
}
else if ( a != NULL && b != NULL )
{
return( a -> data == b -> data && identical( a -> left , b -> left ) &&
identical( a -> right, b -> right ) );
}
else return(false);
}
88.Write a C program to find the mininum value in a binary search tree.
Here is some sample C code. The idea is to keep on moving till you hit the left most node
in the tree
int minValue(struct node* node)
{
struct node *current = node ;
while ( current -> left != NULL )
{
current = current -> left ;
}
return( current -> data );
}
On similar lines, to find the maximum value, keep on moving till you hit the right most
node of the tree.
89.Write a C program to compute the maximum depth in a tree?
Here is some C code...
int maxDepth( struct node* node )
{
if ( node == NULL )
{

return ( 0 );
}
else
{
int leftDepth = maxDepth ( node -> left );
int rightDepth = maxDepth ( node -> right );
if ( leftDepth > rightDepth )
return ( leftDepth + 1 );
else
return ( rightDepth + 1 );
}
}
90.Write a C program to create a mirror copy of a tree (left nodes become right and
right nodes become left)!
This C code will create a new mirror copy tree.
mynode *copy( mynode *root )
{
mynode *temp;
if( root == NULL)
return ( NULL );
temp = ( mynode * ) malloc( sizeof ( mynode ) );
temp -> value = root -> value ;
temp -> left = copy( root -> right );
temp -> right = copy( root -> left ) ;
return ( temp );
}
This code will will only print the mirror of the tree
void tree_mirror(struct node* node)

{
struct node *temp;
if ( node == NULL )
{
return;
}
else
{
tree_mirror ( node -> left );
tree_mirror ( node -> right );
// Swap the pointers in this node
temp = node -> left;
node -> left = node -> right ;
node -> right = temp ;
}
}
91.Write C code to return a pointer to the nth node of an inorder traversal of a BST.
Here is a C program. Study it carefully, it has some Gotchas!
typedef struct node
{
int value;
struct node *left;
struct node *right;
}mynode;
mynode *root;
static ctr;
void nthnode( mynode *root , int n , mynode **nthnode /* POINTER TO A POINTER!
*/ ) ;
int main( )
{
mynode *temp;
root = NULL;
// Construct the tree
add(19);
add(20);
...
add(11);
// Plain Old Inorder traversal
// Just to see if the next function is really returning the nth node?
inorder(root);
// Get the pointer to the nth Inorder node
nthinorder( root , 6 , &temp );
printf("\n[%d]\n, temp -> value ) ;
return ( 0 );
}
// Get the pointer to the nth inorder node in "nthnode"
void nthinorder( mynode *root , int n , mynode **nthnode )
{
static whichnode;
static found;
if( !found )
{
if ( root )
{
nthinorder ( root -> left , n , nthnode ) ;
if ( ++whichnode == n )
{
printf("\nFound %dth node\n", n);
found = 1;
*nthnode = root ; // Store the pointer to the nth node.
}
nthinorder( root -> right , n , nthnode ) ;
}
}
}
inorder( mynode *root )
{
// Plain old inorder traversal
}
// Function to add a new value to a Binary Search Tree
add(int value)
{
mynode *temp , *prev , *cur ;
temp = malloc ( sizeof ( mynode ) ) ;
temp -> value = value ;
temp -> left = NULL;
temp -> right = NULL;
if ( root == NULL )
{
root = temp ;
}
else
{
prev = NULL ;
cur = root ;
while ( cur )
{
prev = cur;
cur = ( value < cur -> value ) ? cur -> left : cur -> right ;
}
if ( value > prev -> value )
prev -> right = temp;
else
prev->left = temp;
}
}
There seems to be an easier way to do this, or so they say. Suppose each node also has a
weight associated with it. This weight is the number of nodes below it and including
itself. So, the root will have the highest weight (weight of its left subtree + weight of its
right subtree + 1). Using this data, we can easily find the nth inorder node.
Note that for any node, the (weight of the leftsubtree of a node + 1) is its inorder rankin
the tree!. Thats simply because of how the inorder traversal works (left->root->right). So
calculate the rank of each node and you can get to the nth inorder node easily. But frankly
speaking, I really dont know how this method is any simpler than the one I have presented
above. I see more work to be done here (calculate thw weights, then calculate the ranks
and then get to the nth node!).
Also, if (n > weight(root)), we can error out saying that this tree does not have the nth
node you are looking for.
92.Write C code to implement the preorder(), inorder() and postorder() traversals.
Whats their time complexities?
Here are the C program snippets to implement these traversals...
Preorder
preorder ( mynode *root )
{
if ( root )
{
printf("Value : [%d]", root->value);
preorder ( root -> left ) ;
preorder ( root -> right ) ;
}
}
Postorder
postorder( mynode *root )
{
if ( root )
{
postorder ( root -> left ) ;
postorder ( root -> right ) ;
}
}
Inorder
inorder ( mynode *root )
{
if ( root )
{
inorder ( root -> left ) ;
inorder ( root -> right ) ;
}

}
Time complexity of traversals is O(n).
93.Write a C program to create a copy of a tree
Here is a C program which does that...
mynode *copy ( mynode *root )
{
mynode *temp;
if ( root == NULL )
return ( NULL ) ;
temp = ( mynode * ) malloc ( sizeof ( mynode ) ) ;
temp -> value = root -> value ;
temp -> left = copy ( root -> left ) ;
temp -> right = copy ( root -> right ) ;
return ( temp ) ;
}
94.Write C code to check if a given binary tree is a binary search tree or not?
Here is a C program which checks if a given tree is a Binary Search Tree or not...
int isThisABST ( struct node* mynode )
{
if ( mynode == NULL )
return ( true ) ;
if ( node -> left != NULL && maxValue( mynode -> left ) > mynode -> data )
return ( false );
if ( node -> right != NULL && minValue ( mynode -> right ) <= mynode ->
data )
return ( false );
if ( !isThisABST ( node -> left ) || !isThisABST ( node -> right ) )
return ( false );
return ( true );
}
95.Write C code to implement level order traversal of a tree.
If this is the tree,
1
2
5 6
3
7 8
its level order traversal would be

1235678
You need to use a queue to do this kind of a traversal
Let t be the tree root.
while ( t != null )
{
visit t and put its children on a FIFO queue;
remove a node from the FIFO queue and
call it t;
// Remove returns null when queue is empty
}
Pseduocode
Level_order_traversal( p )
{
while(p)
{
Visit ( p ) ;
If ( p -> left )
Q.Add ( p -> left ) ;
If ( p -> right )
Q.Add ( p -> right );

Delete ( p );
}
}
Here is some C code (working :))..
#include <stdio.h>
typedef struct node
{
int value;
struct node *right;
struct node *left;
}mynode;
mynode *root;
add_node( int value );
void levelOrderTraversal ( mynode *root );
int main ( int argc , char* argv[] )
{
root = NULL;
add_node(5);
add_node(1);
add_node(-20);
add_node(100);
add_node(23);
add_node(67);
add_node(13);
printf("\n\n\nLEVEL ORDER TRAVERSAL\n\n");
levelOrderTraversal ( root ) ;
getch( );
}
// Function to add a new node...
add_node ( int value )
{
mynode *prev, *cur, *temp;
temp -> value = value;
if ( root == NULL )
{
printf("\nCreating the root..\n");
root = temp;
return;
}
prev = NULL ;
cur = root ;
while ( cur != NULL )
{
prev = cur ;
}
if ( value < prev -> value )
prev -> left = temp;
else
}
// Level order traversal..
void levelOrderTraversal( mynode *root )
{
mynode *queue[100] = { (mynode *)0 } ; // Important to initialize!
int size = 0;
int queue_pointer = 0;
while ( root )
{
printf("[%d] ", root -> value ) ;
if ( root -> left )
{
queue[size++] = root -> left ;
}
if ( root -> right )
{
queue[size++] = root -> right ;
}
root = queue[queue_pointer++];
}
}
96.Write a C program to delete a node from a Binary Search Tree?
The node to be deleted might be in the following states
* The node does not exist in the tree - In this case you have nothing to delete.
* The node to be deleted has no children - The memory occupied by this node must be
freed and either the left link or the right link of the parent of this node must be set to
NULL.
* The node to be deleted has exactly one child - We have to adjust the pointer of the
parent of the node to be deleted such that after deletion it points to the child of the node
being deleted.
* The node to be deleted has two children - We need to find the inorder successor of
the node to be deleted. The data of the inorder successor must be copied into the node to
be deleted and a pointer should be setup to the inorder successor. This inorder successor
would have one or zero children. This node should be deleted using the same procedure
as for deleting a one child or a zero child node. Thus the whole logic of deleting a node
with two children is to locate the inorder successor, copy its data and reduce the problem
to a simple deletion of a node with one or zero children.
Here is some C code for these two situations
Situation 1
100 (parent)
50 (cur == psuc)
20
80 (suc)
90
85 95
Situation 2
100 (parent)
50 (cur)
20
90
80
70 (suc)
75
72 76
node *delete(int item, mynode *head)
{
mynode *cur, *parent, *suc, *psuc, q;
if ( head -> lef t== NULL )
{
printf("\nEmpty tree!\n");
return ( head );
}
parent = head ;
cur = head -> left ;
while ( cur != NULL && item != cur -> value )
{
parent = cur;
cur = ( item < cur -> next ) ? cur -> left : cur -> right ;
}
if ( cur == NULL )
{
printf("\nItem to be deleted not found!\n");
return ( head ) ;
}
// Item found, now delete it
if ( cur -> left == NULL )
q = cur -> right ;
else if ( cur -> right == NULL )
q = cur -> left ;
else
{
// Obtain the inorder successor and its parent
psuc = cur ;
cur = cur -> left ;
while ( suc -> left != NULL )
{
psuc = suc ;
suc = suc->left ;
}
if ( cur == psuc )
{
// Situation 1
suc->left = cur->right ;
}
else
{
// Situation 2
suc -> left = cur -> left ;
psuc -> left = suc -> right ;
suc -> right = cur -> right ;
}
q = suc ;
}
// Attach q to the parent node
if ( parent -> left == cur )
parent -> left = q ;
else
parent -> rlink = q ;
freeNode( cur );
return( head );
}
97.Write C code to search for a value in a binary search tree (BST).
Here are a few C programs....
mynode *search ( int value , mynode *root )
{
while ( root != NULL && value != root -> value )

{
root = ( value < root -> value ) ? root -> left : root -> right ;
}
return ( root ) ;
}
Here is another way to do the same
mynode *recursive_search ( int item , mynode *root )
{
if ( root == NULL || item == root -> value )
{
return ( root ) ;
}
if ( item < root -> info )
{
return ( recursive_search ( item , root -> left ) ) ;
}
else
{
return ( recursive_search ( item , root -> right ) ) ;
}
}
98.Write C code to count the number of leaves in a tree
Here is a C program to do the same...
void count_leaf ( mynode *root )
{
if ( root != NULL )
{
count_leaf ( root -> left ) ;
if ( root -> left == NULL && root -> right == NULL )
{
// This is a leaf!
count++;
}
count_leaf ( root -> right ) ;
}
}
99.Write C code for iterative preorder, inorder and postorder tree traversals
Here is a complete C program which prints a BST using both recursion and iteration. The
best way to understand these algorithms is to get a pen and a paper and trace out the
traversals (with the stack or the queue) alongside. Dont even try to memorize these
algorithms!
#include <stdio.h>
typedef struct node
{
int value;
struct node *right;
struct node *left;
}mynode;
mynode *root;
add_node ( int value ) ;
void postorder ( mynode *root );
void inorder ( mynode *root );
void preorder ( mynode *root );
void iterativePreorder ( mynode *root );
void iterativeInorder ( mynode *root );
void iterativePostorder ( mynode *root );

int main ( int argc , char* argv[] )
{
root = NULL ;
add_node(5);
add_node(1);
add_node(-20);
add_node(100);
add_node(23);
add_node(67);
add_node(13);
printf("\nPreorder (R) : ");
preorder(root);
printf("\nPreorder (I) : ");
iterativePreorder ( root ) ;
printf("\n\nPostorder (R) : ");

postorder(root);
printf("\nPostorder (R) : ");
iterativePostorder ( root ) ;
printf("\n\nInorder (R)
: ");
inorder(root);
printf("\nInorder (I)
: ");
iterativeInorder ( root ) ;
}
// Function to add a new node to the BST
add_node(int value)
{
temp = ( mynode * ) malloc( sizeof ( mynode ) ) ;
temp -> right = NULL ;
if ( root == NULL )
{
root = temp;
return;
}
prev = NULL;
cur = root;
while ( cur != NULL )
{
prev = cur ;
}
else
}
// Recursive Preorder
void preorder ( mynode *root )

{
if ( root )
{
printf("[%d] ", root->value);
preorder ( root -> left );
preorder ( root -> right );
}
}
// Iterative Preorder
void iterativePreorder(mynode *root)
{
mynode *save[100];
int top = 0;
if ( root == NULL )
{
return;
}
save[top++] = root;
while ( top != 0 )
{
root = save[--top];
if ( root -> right != NULL )
save[top++] = root -> right ;
if ( root -> left != NULL )
save[top++] = root->left;
}
}
// Recursive Postorder
void postorder ( mynode *root )
{
if ( root )
{
postorder ( root -> left );
postorder ( root -> right );
printf("[%d] ", root -> value );
}
}
// Iterative Postorder
void iterativePostorder ( mynode *root )
{
struct
{
mynode *node;
unsigned vleft :1; // Visited left?
unsigned vright :1; // Visited right?
}save[100];
int top = 0;
save[top++].node = root ;
while ( top != 0 )
{
/* Move to the left subtree if present and not visited */
if ( root -> left != NULL && !save[top].vleft )
{
save[top].vleft = 1;
save[top++].node = root;
root = root -> left ;
continue;
}
/* Move to the right subtree if present and not visited */
if( root -> right != NULL && !save[top].vright )
{
save[top].vright = 1;
save[top++].node = root;
root = root -> right ;
continue;
}
/* Clean up the stack */
save[top].vleft = 0;
save[top].vright = 0;
/* Move up */
root = save[--top].node;
}
}
// Recursive Inorder
void inorder ( mynode *root )
{
if ( root )
{
inorder ( root -> left );

inorder ( root -> right );
}
}
// Iterative Inorder..
void iterativeInorder ( mynode *root )
{
mynode *save[100];
int top = 0;
while( root != NULL )
{
while (root != NULL)
{
if (root->right != NULL)
{
save[top++] = root->right;
}
save[top++] = root;
root = root->left;
}
root = save[--top];
while(top != 0 && root->right == NULL)
{
root = save[--top];
}

root = (top != 0) ? save[--top] : (mynode *) NULL;
}
}
Creating the root..
Preorder (R)
: [5] [1] [-20] [100] [23] [13] [67]
Preorder (I) : [5] [1] [-20] [100] [23] [13] [67]
Postorder (R) : [-20] [1] [13] [67] [23] [100] [5]

Postorder (R) : [-20] [1] [13] [67] [23] [100] [5]
Inorder (R)
Inorder (I)
: [-20] [1] [5] [13] [23] [67] [100]

: [-20] [1] [5] [13] [23] [67] [100]
100.Can you construct a tree using postorder and preorder traversal?

No
Consider 2 trees below
Tree1
a
b
Tree 2
a
b
preorder = ab
postorder = ba
Preorder and postorder do not uniquely define a binary tree. Nor do preorder and level
order (same example). Nor do postorder and level order.
101.Construct a tree given its inorder and preorder traversal strings. Similarly
construct a tree given its inorder and post order traversal strings.
For Inorder And Preorder traversals
inorder = g d h b e i a f j c
preorder = a b d g h e i c f j
Scan the preorder left to right using the inorder sequence to separate left and right
subtrees. For example, "a" is the root of the tree; "gdhbei" are in the left subtree; "fjc" are
in the right subtree. "b" is the next root; "gdh" are in the left subtree; "ei" are in the right
subtree. "d" is the next root; "g" is in the left subtree; "h" is in the right subtree.
For Inorder and Postorder traversals
Scan postorder from right to left using inorder to separate left and right subtrees.
inorder = g d h b e i a f j c
post order = g h d i e b j f c a
Tree root is "a"; "gdhbei" are in left subtree; "fjc" are in right subtree.
For Inorder and Levelorder traversals
Scan level order from left to right using inorder to separate left and right subtrees.
inorder
=gdhbeiafjc
level order = a b c d e f g h i j
Tree root is "a"; "gdhbei" are in left subtree; "fjc" are in right subtree.
Here is some working code which creates a tree out of the Inorder and Postorder
traversals. Note that here the tree has been represented as an array. This really simplifies
the whole implementation.
Converting a tree to an array is very easy
Suppose we have a tree like this
A
B
DE
FG
The array representation would be

a[1] a[2] a[3] a[4] a[5] a[6] a[7]
A
B C
F G
That is, for every node at position j in the array, its left child will be stored at position
(2*j) and right child at (2*j + 1). The root starts at position 1.
// CONSTRUCTING A TREE GIVEN THE INORDER AND PREORDER SEQUENCE
#include<stdio.h>
#include<string.h>
#include<ctype.h>
/*------------------------------------------------------------* Algorithm
*
* Inorder And Preorder
* inorder = g d h b e i a f j c
* preorder = a b d g h e i c f j
* Scan the preorder left to right using the inorder to separate left
* and right subtrees. a is the root of the tree; gdhbei are in the
* left subtree; fjc are in the right subtree.
*------------------------------------------------------------*/
static char io[]="gdhbeiafjc";
static char po[]="abdgheicfj";
static char t[100][100]={'\0'}; //This is where the final tree will be stored
static int hpos=0;
void copy_str( char dest[], char src[], int pos, int start, int end );
void print_t( );
{
int i,j,k;
char *pos;
int posn;
// Start the tree with the root and its
// left and right elements to start off

for( i = 0 ; i < strlen ( io ) ; i++ )
{
if ( io[i] == po[0] )
{
copy_str(t[1],io,1,i,i);
// We have the root here
copy_str(t[2],io,2,0,i-1);
// Its left subtree
copy_str(t[3],io,3,i+1,strlen(io)); // Its right subtree

print_t();
}
}
// Now construct the remaining tree
for( i = 1 ; i < strlen ( po ) ; i++ )
{
for ( j = 1 ; j <= hpos ; j++ )
{
if ( ( pos = strchr ( ( const char * ) t[j] , po[i] ) ) != ( char * )0 &&
strlen ( t[j] ) != 1 )
{
for ( k = 0 ; k < strlen ( t[j] ) ; k++ )
{
if ( t[j][k] == po[i] )
{
posn=k;
break;
}
}
printf("\nSplitting [%s] for po[%d]=[%c] at %d..\n", t[j],
i,po[i],posn);
copy_str(t[2*j],t[j],2*j,0,posn-1);
copy_str(t[2*j+1],t[j],2*j+1,posn+1,strlen(t[j]));
copy_str(t[j],t[j],j,posn,posn);
print_t();
}
}
}
}
// This function is used to split a string into three seperate strings
// This is used to create a root, its left subtree and its right subtree
void copy_str( char dest[] , char src[] , int pos , int start , int end )
{
char mysrc[100] ;
strcpy(mysrc,src);
dest[0]='\0';
strncat( dest , mysrc + start , end - start + 1 );
if ( pos > hpos ) hpos = pos
}
void print_t(
{
nt i;
for ( i = 1 ; i <= hpos ; i++ )
{
printf("\nt[%d] = [%s]", i, t[i]);
}
printf("\n");
}
102.Find the closest ancestor of two nodes in a tree.
Here is some working C code...
#include <stdio.h>
typedef struct node
{
int value;
struct node *right;
struct node *left;
}mynode;
mynode *root;
mynode *add_node(int value);
void levelOrderTraversal(mynode *root);
mynode *closestAncestor(mynode* root, mynode* p, mynode* q);
{
mynode *node_pointers[7] , *temp ;
root = NULL;
// Create the BST.
// Store the node pointers to use later...
node_pointers[0] = add_node(5);
node_pointers[2] = add_node(-20);

levelOrderTraversal(root);
// Calculate the closest ancestors of a few nodes..
temp = closestAncestor(root, node_pointers[5], node_pointers[6]);
printf("\nClosest ancestor of [%d] and [%d] is [%d]\n\n",node_pointers[5]>value,node_pointers[6]->value , temp->value);
temp = closestAncestor ( root, node_pointers[2], node_pointers[6]);
printf("\n\nClosest ancestor of [%d] and [%d] is [%d]\n\n", node_pointers[2]>value,node_pointers[6]->value,
temp->value);
printf("\n\nClosest ancestor of [%d] and [%d] is [%d]\n\n",node_pointers[4]>value,node_pointers[5]->value,temp->value);
printf("\n\nClosest ancestor of [%d] and [%d] is [%d]\n\n",node_pointers[1]>value,node_pointers[3]->value, temp->value);
printf("\n\nClosest ancestor of [%d] and [%d] is [%d]\n\n",node_pointers[2]>value,node_pointers[6]->value,
temp->value);
}
// Function to add a new node to the tree..
mynode *add_node ( int value )
{

if( root == NULL )

{
root = temp;
return;
}
prev=NULL;
cur=root;
while( cur != NULL )
{
prev=cur;
}
else
prev->right=temp;
return(temp);
}
103.Given an expression tree, evaluate the expression and obtain a paranthesized
form of the expression.
The code below prints the paranthesized form of a tree.
infix_exp(p)
{
if(p)
{
printf("(");
infix_exp(p->left);
printf(p->data);
infix_exp(p->right);
printf(")");
}
}
creating a binary tree for a postfix expression
mynode *create_tree(char postfix[])
{
mynode *temp, *st[100];
int i,k;
char symbol;
for(i=k=0; (symbol = postfix[i])!='\0'; i++)
{
temp->value = symbol;
temp->left = temp->right = NULL;
if( isalnum ( symbol ) )
st[k++] = temp;
else
{
temp->right = st[--k];
temp->left = st[--k];
st[k++]
}
}
return(st[--k]);
}
= temp;

Evaluate a tree
float eval(mynode *root)
{
float num;
switch(root->value)
{
case '+' :
return(eval(root->left) + eval(root->right));
break;
case '-' :
return(eval(root->left) - eval(root->right));
break;
case '/' :
return(eval(root->left) / eval(root->right));
break;
case '*' :
return(eval(root->left) * eval(root->right));
break;
case '$' :
return(eval(root->left) $ eval(root->right));
break;
default :
if(isalpha(root->value))
{
printf("%c = ", root->value);
scanf("%f", &num);
return(num);
}
else
{
return(root->value - '0');
}
}
}
void levelOrderTraversal(mynode *root)
{
mynode *queue[100] = {(mynode *)0};
int size = 0;
while(root)
{
if(root->left)
{
queue[size++] = root->left;
}
if(root->right)
{
queue[size++] = root->right;
}
}
}
// Function to find the closest ancestor...

mynode *closestAncestor(mynode* root, mynode* p, mynode* q)
{
mynode *l, *r, *tmp;
if(root == NULL)
{
return(NULL);
}
if(root->left==p || root->right==p || root->left==q || root->right==q)
{
return(root);
}
else
{
l = closestAncestor(root->left, p, q);
r = closestAncestor(root->right, p, q);
if(l!=NULL && r!=NULL)
{
return(root);
}
else
{
tmp = (l!=NULL) ? l : r;
return(tmp);
}
}
}
Here is the tree for you to visualize...

5 (node=0)
1 (node=1)
100 (node=3)
-20 (node=2)
23 (node=4)
13 (node=5)
67 (node=6)
Here is the output...

LEVEL ORDER TRAVERSAL
[5] [1] [100] [-20] [23] [13] [67]
Closest ancestor of [67] and [13] is [23]
Closest ancestor of [-20] and [13] is [5]
Closest ancestor of [-20] and [13] is [5]
104.How do you convert a tree into an array?
The conversion is based on these rules
If i > 1, i/2 is the parent
If 2*i > n, then there is no left child, else 2*i is the left child.
If (2*i + 1) > n, then there is no right child, else (2*i + 1) is the right child.
Converting a tree to an array is very easy
Suppose we have a tree like this
A
B
DE
FG
The array representation would be

a[1] a[2] a[3] a[4] a[5] a[6] a[7]
A
B C
F G
That is, for every node at position i in the array, its left child will be stored at position
(2*i) and right child at (2*i + 1). The root starts at position 1.
105.What is an AVL tree?

AVL trees are self-adjusting, height-balanced binary search trees and are named after the
inventors: Adelson-Velskii and Landis. A balanced binary search tree has O(log n) height
and hence O(log n) worst case search and insertion times. However, ordinary binary
search trees have a bad worst case. When sorted data is inserted, the binary search tree is
very unbalanced, essentially more of a linear list, with O(n) height and thus O(n) worst
case insertion and lookup times. AVL trees overcome this problem.
An AVL tree is a binary search tree in which every node is height balanced, that is, the
difference in the heights of its two subtrees is at most 1. The balance factor of a node is
the height of its right subtree minus the height of its left subtree (right minus left!). An
equivalent definition, then, for an AVL tree is that it is a binary search tree in which each
node has a balance factor of -1, 0, or +1. Note that a balance factor of -1 means that the
subtree is left-heavy, and a balance factor of +1 means that the subtree is right-heavy.
Each node is associated with a Balancing factor.
Balance factor of each node = height of right subtree at that node - height of left subtree at
that node.
Please be aware that we are talking about the height of the subtrees and not the weigths of
the subtrees. This is a very important point. We are talking about the height!.
Here is some recursive, working! C code that sets the Balance factor for all nodes starting
from the root....
#include <stdio.h>
typedef struct node
{
int value;
int visited;
int bf;
struct node *right;
struct node *left;
}mynode;
mynode *root;
int setbf(mynode *p);

// The main function
{
root = NULL;
// Construct the tree..
add_node(5);
add_node(1);
add_node(-20);
add_node(100);
add_node(23);
add_node(67);
add_node(13);
// Set the balance factors
setbf(root);
getch();
}
// Function to add a new node to the tree...
mynode *add_node(int value)
{
temp = (mynode *) malloc(sizeof(mynode));
temp->value = value;
temp->visited = 0;
temp->bf = 0;
temp->right = NULL;
temp->left = NULL;
if(root==NULL)
{
//printf("\nCreating the root..\n");
root = temp;
return;
}
prev=NULL;
cur=root;
while(cur!=NULL)
{
prev=cur;
cur=(value<cur->value)?cur->left:cur->right;
}
if(value < prev->value)
prev->left=temp;
else
prev->right=temp;
return(temp);
}
// Recursive function to set the balancing factor
// of each node starting from the root!
int setbf(mynode *p)
{
int templ, tempr;
int count;
count = 1;
if(p == NULL)
{
return(0);
}
else
{
templ = setbf(p->left);
tempr = setbf(p->right);
if(templ < tempr)
count = count + tempr;
else
count = count + templ;
}
// Set the nodes balancing factor.
printf("\nNode = [%3d], Left sub-tree height = [%1d], Right sub-tree height = [%
1d], BF = [%1d]\n",
p->value, templ, tempr, (tempr - templ));
p->bf = tempr - templ;
return(count);
}
{
mynode *queue[100] = {(mynode *)0};
int size = 0;
while(root)
{
printf("\n[%3d] (BF : %3d) ", root->value, root->bf);
if(root->left)
{
}
if(root->right)
{
}
}
}
Node = [-20], Left sub-tree height = [0], Right sub-tree height = [0], BF = [0]
Node = [ 1], Left sub-tree height = [1], Right sub-tree height = [0], BF = [-1]
Node = [ 13], Left sub-tree height = [0], Right sub-tree height = [0], BF = [0]
Node = [100], Left sub-tree height = [2], Right sub-tree height = [0], BF = [-2]
LEVEL ORDER TRAVERSAL
[ 5] (BF : 1)
[ 1] (BF : -1)
[100] (BF : -2)
[-20] (BF : 0)
[ 23] (BF : 0)
[ 13] (BF : 0)
[ 67] (BF : 0)
Here is the tree which we were dealing with above
5
1
100
-20
23
13
67
After insertion, the tree might have to be readjusted as needed in order to maintain it as an
AVL tree. A node with balance factor -2 or 2 is considered unbalanced and requires
rebalancing the tree. The balance factor is either stored directly at each node or computed
from the heights of the subtrees, possibly stored at nodes. If, due to an instertion or
deletion, the tree becomes unbalanced, a corresponding left rotation or a right rotation is
performed on that tree at a particular node. A balance factor > 1 requires a left rotation
(i.e. the right subtree is heavier than the left subtree) and a balance factor < -1 requires a
right rotation (i.e. the left subtree is heavier than the right subtree).
Here is some pseudo code to demonstrate the two types of rotations...
Left rotation
BEFORE
0 (par)
0
0 (p)
0
0 (tmp)
0 0
0 0
(a) (b)
Here we left rotate the tree around node p

tmp
= p->right;
p->right = tmp->left;
tmp->left = p;
if(par)
{
if(p is the left child of par)
{
par->left=tmp;
}
else
{
par->right=tmp;
}
}
else
{
root=tmp;
}
// Reclaculate the balance factors
setbf(root);
AFTER
0 (par)
0
0
(tmp)
0
(p)
(b)
0
(a)
Right rotation
BEFORE
0 (par)
0
0 (p)
0 (tmp)
0
0
0
(a) (b)
Here we right rotate the tree around node p
tmp
= p->left;
p->left
= tmp->right;
tmp->right = p;
if(par)
{
if(p is the left child of par)
{
par->left=tmp;
}
else
{
par->right=tmp;
}
}
else
{
root=tmp;
}
// Recalculate the balancing factors...
setbf(root);
AFTER
0 (par)
0
0 (tmp)

(a)
(p)
0
(b)
0
106.How many different trees can be constructed using n nodes?

Good question!
Its
2^n - n
So, if there are 10 nodes, you will have (1024 - 10) = 1014 different trees!! Confirm it
yourself with a small number if you dont believe the formula.
107.A full N-ary tree has M non-leaf nodes, how many leaf nodes does it have?
Use Geometric progression.
M + (N ^ (n-1)) = (1 - (N ^ n)) / (1 - N)
Here (N ^ (n-1)) is the number of leaf-nodes.
Solving for this leads to the answer
Leaf nodes = M * (N - 1) + 1
Suppose you have a 3-ary tree
A
B
E F G H I J K L M
So, here M=4 and N=3. So using the formula above,
Leaf nodes = M * (N - 1) + 1 = 4 * (3 - 1) + 1 = 9
108.Implement Breadth First Search (BFS) and Depth First Search (DFS)
Depth first search (DFS)
Depth First Search (DFS) is a generalization of the preorder traversal. Starting at some
arbitrarily chosen vertex v, we mark v so that we know we've visited it, process v, and
then recursively traverse all unmarked vertices adjacent to v (v will be a different vertex
with every new method call). When we visit a vertex in which all of its neighbors have
been visited, we return to its calling vertex, and visit one of its unvisited neighbors,
repeating the recursion in the same manner. We continue until we have visited all of the
starting vertex's neighbors, which means that we're done. The recursion (stack) guides us
through the graph.
public void depthFirstSearch(Vertex v)
{
v.visited = true;
// print the node
for(each vertex w adjacent to v)
{
if(!w.visited)
{
depthFirstSearch(w);
}
}
}
Here is some working C code for a DFS on a BST..
#include <stdio.h>
typedef struct node
{
int value;
int visited;
struct node *right;
struct node *left;
}mynode;
mynode *root;
void treeDFS(mynode *root);
{
root = NULL;
// Construct the tree..
add_node(5);
add_node(1);
add_node(-20);
add_node(100);
add_node(23);
add_node(67);
add_node(13);
// Do a DFS..
printf("\n\nDFS : ");
treeDFS(root);
getch();
}
// Function to add a new node to the tree...
mynode *add_node(int value)
{
temp->visited = 0;
temp->right = NULL;
temp->left = NULL;
if(root==NULL)
{
root = temp;
return;
}
prev=NULL;
cur=root;
while(cur!=NULL)
{
prev=cur;
}
prev->left=temp;
else
prev->right=temp;
return(temp);
}
// DFS..
void treeDFS(mynode *root)
{
root->visited = 1;
if (root->left)
{
if(root->left->visited==0)
{
treeDFS(root->left);
}
}
if (root->right)
{
if(root->right->visited==0)
{
treeDFS(root->right);
}
}
}
Breadth First Search
Breadth First Search (BFS) searches the graph one level (one edge away from the starting
vertex) at a time. In this respect, it is very similar to the level order traversal that we
discussed for trees. Starting at some arbitrarily chosen vertex v, we mark v so that we
know we've visited it, process v, and then visit and process all of v's neighbors. Now that
we've visited and processed all of v's neighbors, we need to visit and process all of v's
neighbors neighbors. So we go to the first neighbor we visited and visit all of its
neighbors, then the second neighbor we visited, and so on. We continue this process until
we've visited all vertices in the graph. We don't use recursion in a BFS because we don't
want to traverse recursively. We want to traverse one level at a time. So imagine that you
visit a vertex v, and then you visit all of v's neighbors w. Now you need to visit each w's
neighbors. How are you going to remember all of your w's so that you can go back and
visit their neighbors? You're already marked and processed all of the w's. How are you
going to find each w's neighbors if you don't remember where the w's are? After all,
you're not using recursion, so there's no stack to keep track of them. To perform a BFS,
we use a queue. Every time we visit vertex w's neighbors, we dequeue w and enqueue w's
neighbors. In this way, we can keep track of which neighbors belong to which vertex.
This is the same technique that we saw for the level-order traversal of a tree. The only
new trick is that we need to makr the verticies, so we don't visit them more than once -and this isn't even new, since this technique was used for the blobs problem during our
discussion of recursion.
public void breadthFirstSearch(vertex v)
{
Queue q = new Queue();
v.visited = true;
q.enQueue(v);
while( !q.isEmpty() )
{
Vertex w = (Vertex)q.deQueue();
// Print the node.
for(each vertex x adjacent to w)
{
if( !x.visited )
{
x.visited = true;
q.enQueue(x);
}
}
}
}
BFS traversal can be used to produce a tree from a graph.
Here is some C code which does a BFS (level order traversal) on a BST...
#include <stdio.h>
typedef struct node
{
int value;
struct node *right;
struct node *left;
}mynode;
mynode *root;
add_node(int value);
{
root = NULL;
add_node(5);
add_node(1);
add_node(-20);
add_node(100);
add_node(23);
add_node(67);
add_node(13);
getch();
}
add_node(int value)
{
temp
= (mynode *) malloc(sizeof(mynode));
temp->right = NULL;
temp->left = NULL;
if(root==NULL)
{
root = temp;
return;
}
prev=NULL;
cur=root;
while(cur!=NULL)
{
prev=cur;
cur = (value<cur->value)?cur->left : cur->right;
}
prev->left=temp;
else
prev->right=temp;
}
{
mynode *queue[100] = {(mynode *)0}; // Important to initialize!
int size = 0;
while(root)
{
if(root->left)
{
}
if(root->right)
{
}
}
}
109.Write pseudocode to add a new node to a Binary Search Tree (BST)
Here is a C code to construct a BST right from scratch...
#include <stdio.h>
typedef struct node
{
int value;
struct node *right;
struct node *left;
}mynode;
mynode *root;
add_node(int value);
void postorder(mynode *root);
void inorder(mynode *root);
void preorder(mynode *root);
{
root = NULL;
add_node(5);
add_node(1);
add_node(-20);
add_node(100);
add_node(23);
add_node(67);
add_node(13);
printf("\nPreorder
: ");
preorder(root);
printf("\n\nPostorder : ");
postorder(root);
printf("\n\nInorder : ");
inorder(root);
return(0);
}
add_node(int value)
{
temp->right = NULL;
temp->left = NULL;
if(root==NULL)
{
root = temp;
return;
}
prev=NULL;
cur=root;
while(cur!=NULL)
{
prev=cur;
}
prev->left=temp;
else
prev->right=temp;
}
void preorder(mynode *root)
{
if(root)
{
preorder(root->left);
preorder(root->right);
}
}
void postorder(mynode *root)
{
if(root)
{
postorder(root->left);
postorder(root->right);
}
}
void inorder(mynode *root)
{
if(root)
{
inorder(root->left);
inorder(root->right);
}
}
110.What is a threaded binary tree?
Since traversing the three is the most frequent operation, a method must be devised to
improve the speed. This is where Threaded tree comes into picture. If the right link of a
node in a tree is NULL, it can be replaced by the address of its inorder successor. An
extra field called the rthread is used. If rthread is equal to 1, then it means that the right
link of the node points to the inorder success. If its equal to 0, then the right link
represents an ordinary link connecting the right subtree.
struct node
{
int value;
struct node *left;
struct node *right;
int rthread;
}
Function to find the inorder successor
mynode *inorder_successor(mynode *x)
{
mynode *temp;
temp = x->right;
if(x->rthread==1)
return(temp);
while(temp->left!=NULL)
temp = temp->left;
return(temp);
}
Function to traverse the threaded tree in inorder
void inorder(mynode *head)
{
mynode *temp;
if(head->left==head)
{
printf("\nTree is empty!\n");
return;
}
temp = head;
for(;;)
{
temp = inorder_successor(temp);
if(temp==head)
return;
printf("%d ", temp->value);
}
}
Inserting toward the left of a node in a threaded binary tree.
void insert(int item, mynode *x)
{
mynode *temp;
temp = getnode();
temp->value = item;
x->left = temp;
temp->left=NULL;
temp->right=x;
temp->rthread=1;
}
Function to insert towards the right of a node in a threaded binary tree.
void insert_right(int item, mynode *x)
{
mynode *temp, r;
temp=getnode();
temp->info=item;
r=x->right;
x->right=temp;
x->rthread=0;
temp->left=NULL;
temp->right=r;
temp->rthread=1;
}
Function to find the inorder predecessor (for a left threaded binary three)
mynode *inorder_predecessor(mynode *x)
{
mynode *temp;
temp = x->left;
if(x->lthread==1)
return(temp);
while(temp->right!=NULL)
temp=temp->right;
return(temp);
}
Bit Fiddling:
111.Write a C program to count bits set in an integer?
This is one of the most frequently asked interview questions of all times...
There are a number of ways to count the number of bits set in an integer. Here are some C
programs to do the same.
Method1
This is the most basic way of doing it.
#include<stdio.h>
int main()
{
unsinged int num=10;
int ctr=0;
for(;num!=0;num>>=1)
{
if(num&1)
{
ctr++;
}
}
printf("\n Number of bits set in [%d] = [%d]\n", num, ctr);
return(0);
}
Method2
This is a faster way of doing the same thing. Here the control goes into the while loop
only as many times as the number of bits set to 1 in the integer!.
#include<stdio.h>
int main()
{
int num=10;
int ctr=0;
while(num)
{
ctr++;
num = num & (num - 1); // This clears the least significant bit set.
}
printf("\n Number of bits set in [%d] = [%d]\n", num, ctr);
return(0);
}
Method3
This method is very popular because it uses a lookup table. This speeds up the
computation. What it does is it keeps a table which hardcodes the number of bits set in
each integer from 0 to 256.
For example
0 - 0 Bit(s) set.
1 - 1 Bit(s) set.
2 - 1 Bit(s) set.
3 - 2 Bit(s) set.
...
So here is the code...
const unsigned char LookupTable[]
= { 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8
};
unsigned int num;

unsigned int ctr; // Number of bits set.
ctr = LookupTable[num & 0xff] + LookupTable[(num >> 8) & 0xff] + LookupTable
[(num >> 16) & 0xff] +
LoopupTable[num >> 24];
112.What purpose do the bitwise and, or, xor and the shift operators serve?
The AND operator
Truth Table
----------0 AND 0 = 0
0 AND 1 = 0
1 AND 0 = 0
1 AND 1 = 1
x AND 0 = 0
x AND 1 = x
We use bitwise "and" to test if certain bit(s) are one or not. And'ing a value against a

pattern with ones only in the bit positions you are interested in will give zero if none of
them are on, nonzero if one or more is on. We can also use bitwise "and" to turn off (set
to zero) any desired bit(s). If you "and" a pattern against a variable, bit positions in the
pattern that are ones will leave the target bit unchanged, and bit positions in the pattern
that are zeros will set the target bit to zero.
The OR operator
Truth Table
----------0 OR 0 = 0
0 OR 1 = 1
1 OR 0 = 1
1 OR 1 = 1
x OR 0 = x
x OR 1 = 1
Use bitwise "or" to turn on (set to one) desired bit(s).
The XOR operator
0 XOR 0 = 0
0 XOR 1 = 1
1 XOR 0 = 1
1 XOR 1 = 0
x XOR 0 = x
x XOR 1 = ~x
Use bitwise "exclusive or" to flip or reverse the setting of desired bit(s) (make it a one if
it was zero or make it zero if it was one).
The >>, <<, >>=, <<= operators
Operators >> and << can be used to shift the bits of an operand to the right or left a
desired number of positions. The number of positions to be shifted can be specified as a
constant, in a variable or as an expression. Bits shifted out are lost. For left shifts, bit
positions vacated by shifting always filled with zeros. For right shifts, bit positions
vacated by shifting filled with zeros for unsigned data type and with copy of the highest
(sign) bit for signed data type. The right shift operator can be used to achieve quick
multiplication by a power of 2. Similarly the right shift operator can be used to do a quick
division by power of 2 (unsigned types only). The operators >> and <<, dont change the
operand at all. However, the operators >>= and <=< also change the operand after doing
the shift operations.
x << y - Gives value x shifted left y bits (Bits positions vacated by shift are filled with
zeros).
x <<= y - Shifts variable x left y bits (Bits positions vacated by shift are filled with zeros).
A left shift of n bits multiplies by 2 raise to n.
x >> y - Gives value x shifted right y bits.
x >>= y - Shifts variable x right y bits.
For the right shift, All bits of operand participate in the shift. For unsigned data type,
bits positions vacated by shift are filled with zeros. For signed data type, bits positions
vacated by shift are filled with the original highest bit (sign bit). Right shifting n bits
divides by 2 raise to n. Shifting signed values may fail because for negative values the
result never
gets past -1:
-5 >> 3 is -1 and not 0 like -5/8.
Good interview question
A simple C command line utility takes a series of command line options. The options are
given to the utility like this : <utility_name> options=[no]option1,[no]options2,[no]
option3?... Write C code using bitwise operators to use these flags in the code.
//Each option will have a bit reserved in the global_options_bits integer. The
global_options_bits
// integer will have a bit set or not set depending on how the option was specified by the
user.
// For example, if the user said nooption1, the bit for OPTION1 in global_options_bits
// will be 0. Likewise, if the user specified option3, the bit for OPTION3 in
global_options_bits
// will be set to 1.
#define OPTION1 "option1" // For strcmp() with the passed arguments.
#define OPTION1_BITPOS (0x00000001) // Bit reserved for this option.
#define OPTION2 "option2"
#define OPTION2_BITPOS (0x00000002)

#define OPTION3 "option3"
#define OPTION3_BITPOS (0x00000004)
//Required to do the bit operations.

#define ALL_BITPOS (0x0001ffff)
// Assume you have already parsed the command line option and that
// parsed_argument_without_no has option1 or option2 or option3 (depending on what
has
// been provided at the command line) and the variable negate_argument says if the
// option was negated or not (i.e, if it was option1 or nooption1)
if (strcmp((char *) parsed_argument_without_no, (char *) OPTION1) == 0)

{
// Copy the global_options_bits to a temporary variable.
tmp_action= global_options_bits;
if (negate_argument)
{
// Setting the bit for this particular option to 0 as the option has
// been negated.
action_mask= ~(OPTION1_BITPOS) & ALL_BITPOS;
tmp_action= tmp_action & action_mask;
}
else
{
//Setting the bit for this particular option to 1.
action_mask= (OPTION1_BITPOS);
tmp_action= tmp_action | action_mask;

}
// Copy back the final bits to the global_options_bits variable
global_options_bits= tmp_action;
}
else if (strcmp((char *) parsed_argument_without_no, (char *) OPTION2) == 0)
{
//Similar code for OPTION2
}
else if (strcmp((char *) parsed_argument_without_no, (char *) OPTION3) == 0)
{
//Similar code for OPTION3
}
//Now someone who wishes to check if a particular option was set or not can use the
// following type of code anywhere else in the code.
if(((global_options_bits & OPTION1_BITPOS) == OPTION1_BITPOS)
{
//Do processing for the case where OPTION1 was active.
}
else
{
//Do processing for the case where OPTION1 was NOT active.
}
113.How to reverse the bits in an interger?
Here are some ways to reverse the bits in an integer.
Method1
unsigned int num;
// Reverse the bits in this number.
unsigned int temp = num;
// temp will have the reversed bits of num.
int i;
for (i = (sizeof(num)*8-1); i; i--)
{
temp = temp | (num & 1);
temp <<= 1;
num >>= 1;
}
temp = temp | (num & 1);
Method2
In this method, we use a lookup table.
const unsigned char ReverseLookupTable[] =
{
0x00, 0x80, 0x40, 0xC0, 0x20, 0xA0, 0x60, 0xE0, 0x10, 0x90, 0x50, 0xD0, 0x30,
0xB0, 0x70, 0xF0,
0xB8, 0x78, 0xF8,
0xB4, 0x74, 0xF4,
0x0C, 0x8C, 0x4C, 0xCC, 0x2C, 0xAC, 0x6C, 0xEC, 0x1C, 0x9C, 0x5C, 0xDC,
0x3C, 0xBC, 0x7C, 0xFC,
0xB2, 0x72, 0xF2,
0x0A, 0x8A, 0x4A, 0xCA, 0x2A, 0xAA, 0x6A, 0xEA, 0x1A, 0x9A, 0x5A, 0xDA,
0x3A, 0xBA, 0x7A, 0xFA,
0xB6, 0x76, 0xF6,
0x0E, 0x8E, 0x4E, 0xCE, 0x2E, 0xAE, 0x6E, 0xEE, 0x1E, 0x9E, 0x5E, 0xDE, 0x3E,
0xBE, 0x7E, 0xFE,
0xB1, 0x71, 0xF1,
0xB9, 0x79, 0xF9,
0xB5, 0x75, 0xF5,
0x0D, 0x8D, 0x4D, 0xCD, 0x2D, 0xAD, 0x6D, 0xED, 0x1D, 0x9D, 0x5D, 0xDD,
0x3D, 0xBD, 0x7D, 0xFD,
0xB3, 0x73, 0xF3,
0x0B, 0x8B, 0x4B, 0xCB, 0x2B, 0xAB, 0x6B, 0xEB, 0x1B, 0x9B, 0x5B, 0xDB,
0x3B, 0xBB, 0x7B, 0xFB,
0xB7, 0x77, 0xF7,
0x0F, 0x8F, 0x4F, 0xCF, 0x2F, 0xAF, 0x6F, 0xEF, 0x1F, 0x9F, 0x5F, 0xDF, 0x3F,
0xBF, 0x7F, 0xFF
};
unsigned int num; // Reverse the bits in this number.

unsigned int temp; // Store the reversed result in this.
temp = (ReverseLookupTable[num & 0xff] << 24) | (ReverseLookupTable[(num >> 8) &
0xff] << 16) |
(ReverseLookupTable[(num >> 16) & 0xff] << 8) | (ReverseLookupTable[(num >>
24) & 0xff] );
114.Check if the 20th bit of a 32 bit integer is on or off?
AND it with x00001000 and check if its equal to x00001000
if ( ( num & x00001000 ) == x00001000 )
Note that the digits represented here are in hex.
0
^
|
x0000 0000 0000 0000 0001 0000 0000 0000 = 32 bits
^
0th bit
|
20th bit
32nd bit
115.How to reverse the odd bits of an integer?

XOR each of its 4 hex parts with 0101.
116.How would you count the number of bits set in a floating point number?
This questions will be answered soon :)
Sorting Techniques
117.What is heap sort?
A Heap is an almost complete binary tree.In this tree, if the maximum level is i, then,
upto the (i-1)th level should be complete. At level i, the number of nodes can be less than
or equal to 2î. If the number of nodes is less than 2î, then the nodes in that level should
be completely filled, only from left to right.
The property of an ascending heap is that, the root is the lowest and given any other node
i, that node should be less than its left child and its right child. In a descending heap, the
root should be the highest and given any other node i, that node should be greater than its
left child and right child.
To sort the elements, one should create the heap first. Once the heap is created, the root
has the highest value. Now we need to sort the elements in ascending order. The root can
not be exchanged with the nth element so that the item in the nth position is sorted. Now,
sort the remaining (n-1) elements. This can be achieved by reconstructing the heap for (n1) elements.
A highly simplified pseudocode is given below
heapsort()
{
n = array(); // Convert the tree into an array.
makeheap(n); // Construct the initial heap.
for(i=n; i>=2; i--)
{
swap(s[1],s[i]);
heapsize--;
keepheap(i);
}
}
makeheap(n)
{
heapsize=n;
for(i=n/2; i>=1; i--)
keepheap(i);
}
keepheap(i)
{
l = 2*i;
r = 2*i + 1;
p = s[l];
q = s[r];
t = s[i];
if(l<=heapsize && p->value > t->value)
largest = l;
else
largest = i;
m = s[largest];
if(r<=heapsize && q->value > m->value)
largest = r;
if(largest != i)
{
swap(s[i], s[largest]);
keepheap(largest);
}
}
118.What is the difference between Merge Sort and Quick sort?
Both Merge-sort and Quick-sort have same time complexity i.e. O(nlogn). In merge sort
the file a[1:n] was divided at its midpoint into sub-arrays which are independently sorted
and later merged. Whereas, in quick sort the division into two sub-arrays is made so that
the sorted sub-arrays do not need to be merged latter.
119.Give pseudocode for the mergesort algorithm
Mergesort(a, left, right)
{
if(left<right)
{
I=(left+right)/2;
Mergesort(a,left, I);
Mergesort(a,I+1,right);
Merge(a,b,left,I,right);
Copy(b,a,left,right);
}
}
The merge would be something liks this
merge(int a[], int b[], int c[], int m, int n)
{
int i, j, k;
i = 0;
j = 0;
k = 0;
while(i<=m && j<=n)
{
if(a[i] < a[j])
{
c[k]=a[i];
i = i+1;
}
else
{
c[k]=a[j];
j=j+1;
}
k=k+1;
}
while(i<=m)
c[k++]=a[i++];
while(j<=n)
c[k++]=a[j++];
}
120.Implement the bubble sort algorithm. How can it be improved? Write the code
for selection sort, quick sort, insertion sort.
Here is the Bubble sort algorithm
void bubble_sort(int a[], int n)
{
int i, j, temp;
for(j = 1; j < n; j++)
{
for(i = 0; i < (n - j); i++)
{
if(a[i] >= a[i + 1])
{
//Swap a[i], a[i+1]
}
}
}
}
To improvise this basic algorithm, keep track of whether a particular pass results in any
swap or not. If not, you can break out without wasting more cycles.
void bubble_sort(int a[], int n)
{
int i, j, temp;
int flag;
for(j = 1; j < n; j++)
{
flag = 0;
for(i = 0; i < (n - j); i++)
{
if(a[i] >= a[i + 1])
{
//Swap a[i], a[i+1]
flag = 1;
}
}
if(flag==0)break;
}
}
This is the selection sort algorithm
void selection_sort(int a[], int n)
{
int i, j, small, pos, temp;
for(i = 0; i < (n - 1); i++)

{
small = a[i];
pos = i;
for(j = i + 1; j < n; j++)
{
if(a[j] < small)
{
small = a[j];
pos = j;
}
}
temp = a[pos];
a[pos] = a[i];
a[i] = temp;
}
}
Here is the Quick sort algorithm
int partition(int a[], int low, int high)
{
int i, j, temp, key;
key = a[low];
i = low + 1;
j = high;
while(1)
{
while(i < high && key >= a[i])
i++;
while(key < a[j])
j--;
if(i < j)
{
temp = a[i];
a[i] = a[j];
a[j] = temp;
}
else
{
temp = a[low];
a[low] = a[j];
a[j] = temp;
return(j);
}
}
}
void quicksort(int a[], int low, int high)
{
int j;
if(low < high)
{
j = partition(a, low, high);
quicksort(a, low, j - 1);
quicksort(a, j + 1, high);
}
}
int main()
{
// Populate the array a
quicksort(a, 0, n - 1);
}
Here is the Insertion sort algorithm
void insertion_sort(int a[], int n)
{
int i, j, item;
for(i = 0; i < n; i++)
{
item = a[i];
j
= i - 1;
while(j >=0 && item < a[j])

{
a[j + 1] = a[j];
j--;
}
a[j + 1] = item;
}
}
C Pointers
121.What does *p++ do? Does it increment p or the value pointed by p?
The postfix "++" operator has higher precedence than prefix "*" operator. Thus, *p++ is
same as *(p++); it increments the pointer p, and returns the value which p pointed to
before p was incremented. If you want to increment the value pointed to by p, try (*p)++.
122.What is a NULL pointer? How is it different from an unitialized pointer? How
is a NULL pointer defined?

A null pointer simply means "I am not allocated yet!" and "I am not pointing to anything
yet!".
The C language definition states that for every available pointer type, there is a special
value which is called the null pointer. It is guaranteed to compare unequal to a pointer to
any object or function.
A null pointer is very different from an uninitialized pointer. A null pointer does not point
to any object or function; but an uninitialized pointer can point anywhere.
There is usually a null pointer for each type of a pointer, and the internal values of these
null pointers for different pointer types may be different, its up to the compiler. The &
operator will never yield a null pointer, nor will a successful call to malloc() (malloc()
does return a null pointer when it fails).
execl("/bin/ls", "ls", "-l", (char *)0);
In this call to execl(), the last argument has been explicitly casted to force the 0 to be
treated as a pointer.
Also, if ptr is a pointer then
if( ptr ) { }
and
if( !ptr ) { }
are perfectly valid.
How is NULL defined?, you may ask.
ANSI C allows the following definition
#define NULL ((void *)0)
NULL and 0 are interchangeable in pointer contexts.
Make sure you are able to distinguish between the following : the null pointer, the
internal representation of a null pointer, the null pointer constant (i.e, 0), the NULL
macro, the ASCII null character (NUL), the null string ("").
123.What is a null pointer assignment error?
This error means that the program has written, through a null (probably because its an
uninitialized) pointer, to a location thats invalid.
More to come....
124.Does an array always get converted to a pointer? What is the difference between
arr and &arr? How does one declare a pointer to an entire array?

Well, not always.

In C, the array and pointer arithmetic is such that a pointer can be used to access an array
or to simulate an array. What this means is whenever an array appears in an expression,
the compiler automatically generates a pointer to the array's first element (i.e, &a[0]).
There are three exceptions to this rule
1. When the array is the operand of the sizeof() operator.
2. When using the & operator.
3. When the array is a string literal initializer for a character array.
Also, on a side note, the rule by which arrays decay into pointers is not applied
recursively!. An array of arrays (i.e. a two-dimensional array in C) decays into a pointer to
an array, not a pointer to a pointer.
If you are passing a two-dimensional array to a function:
int myarray[NO_OF_ROWS][NO_OF_COLUMNS];
myfunc(myarray);
then, the function's declaration must match:
void myfunc(int myarray[][NO_OF_COLUMNS])
or
void myfunc(int (*myarray)[NO_OF_COLUMNS])

Since the called function does not allocate space for the array, it does not need to know
the overall size, so the number of rows, NO_OF_ROWS, can be omitted. The width of
the array is still important, so the column dimension
NO_OF_COLUMNS must be present.
An array is never passed to a function, but a pointer to the first element of the array is
passed to the function. Arrays are automatically allocated memory. They can't be
relocated or resized later. Pointers must be assigned to allocated memory (by using (say)
malloc), but pointers can be reassigned and made to point to other memory chunks.
So, whats the difference between func(arr) and func(&arr)?
In C, &arr yields a pointer to the entire array. On the other hand, a simple reference to arr
returns a pointer to the first element of the array arr. Pointers to arrays (as in &arr) when
subscripted or incremented, step over entire arrays, and are useful only when operating on
arrays of arrays. Declaring a pointer to an entire array can be done like int (*arr)[N];,
where N is the size of the array.
Also, note that sizeof() will not report the size of an array when the array is a parameter to
a function, simply because the compiler pretends that the array parameter was declared as
a

pointer and sizeof reports the size of the pointer.

125.Is the cast to malloc() required at all?
Before ANSI C introduced the void * generic pointer, these casts were required because
older compilers used to return a char pointer.
int *myarray;
myarray = (int *)malloc(no_of_elements * sizeof(int));
But, under ANSI Standard C, these casts are no longer necessary as a void pointer can be
assigned to any pointer. These casts are still required with C++, however.
126.What does malloc() , calloc(), realloc(), free() do? What are the common
problems with malloc()? Is there a way to find out how much memory a pointer was
allocated?
malloc() is used to allocate memory. Its a memory manager.
calloc(m, n) is also used to allocate memory, just like malloc(). But in addition, it also
zero fills the allocated memory area. The zero fill is all-bits-zero. calloc(m.n) is
essentially equivalent to
p = malloc(m * n);
memset(p, 0, m * n);
The malloc() function allocates raw memory given a size in bytes. On the other hand,
calloc() clears the requested memory to zeros before return a pointer to it. (It can also
compute the request size given the size of the base data structure and the number of them
desired.)
The most common source of problems with malloc() are
1. Writing more data to a malloc'ed region than it was allocated to hold.
2. malloc(strlen(string)) instead of (strlen(string) + 1).
3. Using pointers to memory that has been freed.
4. Freeing pointers twice.
5. Freeing pointers not obtained from malloc.
6. Trying to realloc a null pointer.
How does free() work?
Any memory allocated using malloc() realloc() must be freed using free(). In general, for
every call to malloc(), there should be a corresponding call to free(). When you call free(),
the memory pointed to by the passed pointer is freed. However, the value of the pointer in

the caller remains unchanged. Its a good practice to set the pointer to NULL after freeing
it to prevent accidental usage. The malloc()/free() implementation keeps track of the size
of each block as it is allocated, so it is not required to remind it of the size when freeing it
using free(). You can't use dynamically-allocated memory after you free it.
Is there a way to know how big an allocated block is?
Unfortunately there is no standard or portable way to know how big an allocated block is
using the pointer to the block!. God knows why this was left out in C.
Is this a valid expression?
pointer = realloc(0, sizeof(int));
Yes, it is!
127.What's the difference between const char *p, char * const p and const char *
const p?
const char *p
- This is a pointer to a constant char. One cannot change the value
pointed at by p, but can change the pointer p itself.

*p = 'A' is illegal.
p = "Hello" is legal.
Note that even char const *p is the same!
const * char p - This is a constant pointer to (non-const) char. One cannot change
the pointer p, but can change the value pointed at by p.
*p = 'A' is legal.
p = "Hello" is illegal.
const char * const p - This is a constant pointer to constant char! One cannot
change the value pointed to by p nor the pointer.
*p = 'A' is illegal.
p = "Hello" is also illegal.
To interpret these declarations, let us first consider the general form of declaration:
[qualifier] [storage-class] type [*[*]..] [qualifier] ident ;
or
[storage-class] [qualifier] type [*[*]..] [qualifier] ident ;

where,
qualifier:
volatile
storage-class:
auto
type:
void
const
extern
char
double
short
signed
typedef-name
static
register
int
long
unsigned
float
enum-specifier
struct-or-union-specifier
Both the forms are equivalent. Keywords in the brackets are optional. The simplest tip
here is to notice the relative position of the `const' keyword with respect to the asterisk
(*).
Note the following points:
* If the `const' keyword is to the left of the asterisk, and is the only such keyword in the
declaration, then object pointed by the pointer is constant, however, the pointer itself is
variable. For example:
const char * pcc;
char const * pcc;
* If the `const' keyword is to the right of the asterisk, and is the only such keyword in
the declaration, then the object pointed by the pointer is variable, but the pointer is
constant; i.e., the pointer, once initialized, will always point to the same object through
out it's scope. For example:
char * const cpc;
* If the `const' keyword is on both sides of the asterisk, the both the pointer and the
pointed object are constant. For example:
const char * const cpcc;
char const * const cpcc2;
One can also follow the "nearness" principle; i.e.,
* If the `const' keyword is nearest to the `type', then the object is constant. For
example:
char const * pcc;
* If the `const' keyword is nearest to the identifier, then the pointer is constant. For
example:
char * const cpc;

* If the `const' keyword is nearest, both to the identifier and the type, then both the
pointer and the object are constant. For example:
const char * const cpcc;
char const * const cpcc2;
However, the first method seems more reliable...
128.What is a void pointer? Why can't we perform arithmetic on a void * pointer?
The void data type is used when no other data type is appropriate. A void pointer is a
pointer that may point to any kind of object at all. It is used when a pointer must be
specified but its type is unknown.
The compiler doesn't know the size of the pointed-to objects incase of a void * pointer.
Before performing arithmetic, convert the pointer either to char * or to the pointer type
you're trying to manipulate
129.What do Segmentation fault, access violation, core dump and Bus error mean?
The segmentation fault, core dump, bus error kind of errors usually mean that the
program tried to access memory it shouldn't have.
Probable causes are overflow of local arrays; improper use of null pointers; corruption of
the malloc() data structures; mismatched function arguments (specially variable argument
functions like sprintf(), fprintf(), scanf(), printf()).
For example, the following code is a sure shot way of inviting a segmentation fault in
your program:
sprintf(buffer, "%s %d", "Hello");
So whats the difference between a bus error and a segmentation fault?
A bus error is a fatal failure in the execution of a machine language instruction resulting
from the processor
detecting an anomalous condition on its bus.
Such conditions include:
- Invalid address alignment (accessing a multi-byte number at an odd address).
- Accessing a memory location outside its address space.
- Accessing a physical address that does not correspond to any device.
- Out-of-bounds array references.
- References through uninitialized or mangled pointers.

A bus error triggers a processor-level exception, which Unix translates into a "SIGBUS"
signal,which if not caught, will terminate the current process. It looks like a SIGSEGV,
but the difference between the two is that SIGSEGV indicates an invalid access to valid
memory, while SIGBUS indicates an access to an invalid address.
Bus errors mean different thing on different machines. On systems such as Sparcs a bus
error occurs when you access memory that is not positioned correctly.
Maybe an example will help to understand how a bus error occurs
#include < stdlib.h>
#include < stdio.h>
int main(void)
{
char *c;
long int *i;
c = (char *) malloc(sizeof(char));
c++;
i = (long int *)c;
printf("%ld", *i);
return 0;
}
On Sparc machines long ints have to be at addresses that are multiples of four (because
they are four bytes long), while chars do not (they are only one byte long so they can be
put anywhere). The example code uses the char to create an invalid address, and assigns
the long int to the invalid address. This causes a bus error when the long int is
dereferenced.
A segfault occurs when a process tries to access memory that it is not allowed to, such as
the memory at address 0 (where NULL usually points). It is easy to get a segfault, such as
the following example, which dereferences NULL.
#include < stdio.h>
int main(void)
{
char *p;

p = NULL;
putchar(*p);
return 0;
}
130.What is the difference between an array of pointers and a pointer to an array?
This is an array of pointers
int *p[10];
This is a pointer to a 10 element array
int (*p)[10];
131.What is a memory leak?
Its an scenario where the program has lost a reference to an area in the memory. Its a
programming term describing the loss of memory. This happens when the program
allocates some memory but fails to return it to the system
132.What are brk() and sbrk() used for? How are they different from malloc()?
brk() and sbrk() are the only calls of memory management in UNIX. For one value of the
address, beyond the last logical data page of the process, the MMU generates a
segmentation violation interrupt and UNIX kills the process. This address is known as the
break address of a process. Addition of a logical page to the data space implies raising of
the break address (by a multiple of a page size). Removal of an entry from the page
translation table automatically lowers the break address.
brk()and sbrk() are systems calls for this process
char *brk(char *new_break);
char *sbrk(displacement)
Both calls return the old break address to the process. In brk(), the new break address
desired needs to be specified as the parameter. In sbrk(), the displacement (+ve or -ve) is
the difference between the new and the old break address. sbrk() is very similar to malloc
() when it allocates memory (+ve displacement).
malloc() is really a memory manager and not a memory allocator since, brk/sbrk only can
do memory allocations under UNIX. malloc() keeps track of occupied and free peices of
memory. Each malloc request is expected to give consecutive bytes and hence malloc
selects the smallest free pieces that satisfy a request. When free is called, any consecutive
free pieces are coalesced into a large free piece. These is done to avoid fragmentation.
realloc() can be used only with a preallocated/malloced/realloced memory. realloc() will
automatically allocate new memory and transfer maximum possible contents if the new

space is not available. Hence the returned value of realloc must always be stored back
into the old pointer itself.
133.What is a dangling pointer? What are reference counters with respect to
pointers?
A pointer which points to an object that no longer exists. Its a pointer referring to an area
of memory that has been deallocated. Dereferencing such a pointer usually produces
garbage.
Using reference counters which keep track of how many pointers are pointing to this
memory location can prevent such issues. The reference counts are incremented when a
new pointer starts to point to the memory location and decremented when they no longer
need to point to that memory. When the reference count reaches zero, the memory can be
safely freed. Also, once freed, the corresponding pointer must be set to NULL.
134.What do pointers contain?
Since addresses are always whole numbers, pointers always contain whole numbers.
135.Is *(*(p+i)+j) is equivalent to p[i][j]? Is num[i] == i[num] == *(num + i) == *(i +
num)?
Yes
*(*(p+i)+j) == p[i][j].
So is
num[i] == i[num] == *(num + i) == *(i + num)
136.What operations are valid on pointers? When does one get the Illegal use of
pointer in function error?
This is what is Valid
px<py
px>=py
px==py
px!=py
px==NULL
px=px+n
px=px-n
px-py

Everything else is invalid (multiplication, division, addition of two pointers)!

Something like
j = j * 2;
k = k / 2;
where j and k are pointers will give this error
Illegal use of pointer in function main
137.What are near, far and huge pointers?
While working under DOS only 1 mb of memory is accessible. Any of these
memory locations are accessed using CPU registers. Under DOS, the CPU registers are
only 16 bits long. Therefore, the minimum value present in a CPU register could be 0,
and maximum 65,535. Then how do we access memory locations beyond 65535th byte?
By using two registers (segment and offset) in conjunction. For this the total memory (1
mb) is divided into a number of units each comprising 65,536 (64 kb) locations. Each
such unit is called a segment. Each segment always begins at a location number which is
exactly divisible by 16. The segment register contains the address where a segment
begins, whereas the offset register contains the offset of the data/code from where the
segment begins. For example, let us consider the first byte in B block of video memory.
The segment address of video memory is B0000h (20-bit address), whereas the offset
value of the first byte in the upper 32K block of this segment is 8000h. Since 8000h is a
16-bit address it can be easily placed in the offset register, but how do we store the 20-bit
address B0000h in a 16-bit segment register? For this out of B0000h only first four hex
digits (16 bits) are stored in segment register. We can afford to do this because a segment
address is always a multiple of 16 and hence always contains a 0 as the last digit.
Therefore, the first byte in the upper 32K chunk of B block of video memory is referred
using segment:offset format as B000h:8000h. Thus, the offset register works relative to
segment register. Using both these, we can point to a specific location anywhere in the 1
mb address space.
Suppose we want to write a character À' at location B000:8000. We must convert
this address into a form which C understands. This is done by simply writing the segment
and offset addresses side by side to obtain a 32 bit address. In our example this address
would be 0xB0008000. Now whether C would support this 32 bit address or not depends
upon the memory model in use. For example, if we are using a large data model
(compact, large, huge) the above address is acceptable. This is because in these models all
pointers to data are 32 bits long. As against this, if we are using a small data model (tiny,
small, medium) the above address won't work since in these models each pointer is 16
bits long.
What if we are working in small data model and still want to access the first byte
of the upper 32K chunk of B block of video memory? In such cases both Microsoft C and
Turbo C provide a keyword called far, which is used as shown below,
char far *s = 0XB0008000;

A far pointer is always treated as 32 bit pointer and contains both a segment
address and an offset.
A huge pointer is also 32 bits long, again containing a segment address and an
offset. However, there are a few differences between a far pointer and a huge pointer.
A near pointer is only 16 bits long, it uses the contents of CS register (if the
pointer is pointing to code) or contents of DS register (if the pointer is pointing to data)
for the segment part, whereas the offset part is stored in the 16-bit near pointer. Using
near pointer limits your data/code to current 64 kb segment.
A far pointer (32 bit) contains the segment as well as the offset. By using far
pointers we can have multiple code segments, which in turn allow you to have programs
longer than 64 kb. Likewise, with far data pointers we can address more than 64 kb worth
of data. However, while using far pointers some problems may crop up as is illustrated by
the following program.
main( )
{
char far *a = OX00000120;
char far *b = OX00100020;
char far *c = OX00120000;
if ( a == b )
printf ( "Hello" ) ;
if ( a == c )
printf ( "Hi" ) ;
if ( b == c )
printf ( "Hello Hi" ) ;
if ( a > b && a > c && b > c )
printf ( "Bye" ) ;
}
Note that all the 32 bit addresses stored in variables a, b, and c refer to the same memory
location. This deduces from the method of obtaining the 20-bit physical address from the
segment:offset pair. This is shown below.
00000 segment address left shifted by 4 bits
0120 offset address

-------00120 resultant 20 bit address

0020 offset address
0000 offset address
Now if a, b and c refer to same location in memory we expect the first three ifs to be
satisfied. However this doesn't happen. This is because while comparing the far pointers
using == (and !=) the full 32-bit value is used and since the 32-bit values are different the
ifs fail. The last if however gets satisfied, because while comparing using > (and >=, <,
<= ) only the offset value is used for comparison. And the offset values of a, b and c are
such that the last condition is satisfied.
These limitations are overcome if we use huge pointer instead of far pointers.
Unlike far pointers huge pointers are `normalized' to avoid these problems. What is a
normalized pointer? It is a 32- bit pointer which has as much of its value in the segment
address as possible. Since a segment can start every 16 bytes, this means that the offset
will only have a value from 0 to F.
How do we normalize a pointer? Simple. Convert it to its 20-bit address then use
the the left 16 bits for the segment address and the right 4 bits for the offset address. For
example, given the pointer 500D:9407, we convert it to the absolute address 594D7,
which we then normalize to 594D:0007.
Huge pointers are always kept normalized. As a result, for any given memory
address there is only one possible huge address - segment:offset pair for it. Run the above
program using huge instead of far and now you would find that the first three ifs are
satisfied, whereas the fourth fails. This is more logical than the result obtained while
using far. But then there is a price to be paid for using huge pointers. Huge pointer
arithmetic is done with calls to special subroutines. Because of this, huge pointer
arithmetic is significantly slower than that of far or near pointers. The information
presented is specific to DOS operating system only.
138.What is the difference between malloc() and calloc()?
First lets look at the prototypes of these two popular functions..

#include <stdlib.h>
void *calloc(size_t n, size_t size);
void *malloc(size_t size);
The two functions malloc() and calloc() are functionally same in that they both allocate
memory from a storage pool (generally called heap). Actually, the right thing to say is that
these two functions are memory managers and not memory allocators. Memory allocation
is done by OS specific routines (like brk() and sbrk()). But lets not get into that for now...
Here are some differences between these two functions..
* malloc() takes one argument, whereas calloc() takes two.
* calloc() initializes all the bits in the allocated space to zero (this is all-bits-zero!,
where as malloc() does not do this.
* A call to calloc() is equivalent to a call to malloc() followed by one to memset().
calloc(m, n)
is essentially equivalent to
p = malloc(m * n);
memset(p, 0, m * n);
Using calloc(), we can carry out the functionality in a faster way than a combination
of malloc() and memset() probably would. You will agree that one libray call is faster
than two calls. Additionally, if provided by the native CPU, calloc() could be
implementated by the CPU's "allocate-and-initialize-to-zero" instruction.
* The reason for providing the "n" argument is that sometimes it is required to allocate
a number ("n") of uniform objects of a particular size ("size"). Database application, for
instance, will have such requirements. Proper planning for the values of "n" and "size"
can lead to good memory utilization.
139.Why is sizeof() an operator and not a function?
sizeof() is a compile time operator. To calculate the size of an object, we need the type
information. This type information is available only at compile time. At the end of the
compilation phase, the resulting object code doesn't have (or not required to have) the
type information. Of course, type information can be stored to access it at run-time, but
this results in bigger object code and less performance. And most of the time, we don't
need it. All the runtime environments that support run time type identification (RTTI)
will retain type information even after compilation phase. But, if something can be done
in compilation time itself, why do it at run time?
On a side note, something like this is illegal...

printf("%u\n", sizeof(main));
This asks for the size of the main function, which is actually illegal:
6.5.3.4 The sizeof operator
The sizeof operator shall not be applied to an expression that has function type....
140.What is an opaque pointer?
A pointer is said to be opaque if the definition of the type to which it points to is
not included in the current translation unit. A translation unit is the result of merging an
implementation file with all its headers and header files.
C Functions
141.How to declare a pointer to a function?
Use something like this
int myfunc(); // The function.
int (*fp)(); // Pointer to that function.
fp = myfunc; // Assigning the address of the function to the pointer.
(*fp)();
fp();
// Calling the function.

// Another way to call the function.
So then, what are function pointers, huh?

In simple words, a function pointer is a pointer variable which holds the address of a
function and can be used to invoke that function indirectly. Function pointers are useful
when you want to invoke seperate functions based on different scenarios. In that case, you
just pass in the pointer to the function you want to be invoked. Function pointers are used
extensively when writing code with call back scenarios.
For example, when writing code involving a XML parser, you pass in the pointers to your
event handling functions and whenever there is a specific event, the XML parser calls
your functions through their pointers. This function whose pointer is passed is generally
called as the call back function.
Here is an implementation of a Generic linked list which uses function pointers really
well...
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
typedef struct list {

void *data;
struct list *next;
} List;
struct check {
int i;
char c;
double d;
} chk[] = {
{ 1, 'a', 1.1 },
{ 2, 'b', 2.2 },
{ 3, 'c', 3.3 }
};
// See how the print() function takes in a pointer to a function!
void print(List *, void (*)(void *));
void insert(List **, void *, unsigned int);
void printstr(void *);
void printint(void *);
void printchar(void *);
void printcomp(void *);
List *list1, *list2, *list3, *list4;
int main(void)
{
char c[]
int i[]
= { 'a', 'b', 'c', 'd' };

= { 1, 2, 3, 4 };
char *str[] = { "hello1", "hello2", "hello3", "hello4" };

list1 = list2 = list3 = list4 = NULL;

printf("Printing characters:");
print(list1, printchar);
printf("Printing integers:");
print(list2, printint);
printf("Printing strings:");
print(list3, printstr);
printf("Printing composite:");
print(list4, printcomp);
printf(" : done\n");
return 0;
}
void insert(List **p, void *data, unsigned int n)
{
List *temp;
int i;
/* Error check is ignored */
temp = malloc(sizeof(List));
temp->data = malloc(n);
for (i = 0; i < n; i++)
*(char *)(temp->data + i) = *(char *)(data + i);
temp->next = *p;
*p = temp;
}
void print(List *p, void (*f)(void *))
{
while (p)
{
(*f)(p->data);
p = p->next;
}
}
void printstr(void *str)
{
printf(" \"%s\"", (char *)str);
}
void printint(void *n)
{

printf(" %d", *(int *)n);

}
void printchar(void *c)
{
printf(" %c", *(char *)c);
}
void printcomp(void *comp)
{
struct check temp = *(struct check *)comp;
printf(" '%d:%c:%f", temp.i, temp.c, temp.d);
}
142.Does extern in a function declaration mean anything?
The extern in a function's declaration is sometimes used to indicate that the function's
definition is in some other source file, but there is no difference between
extern int function_name();
and
int function_name();
143.How can I return multiple values from a function?
You can pass pointers to locations which the function being called can populate, or have
the function return a structure containing the desired values, or use global variables.
144.Does C support function overloading?
Function overload is not present in C. In C, either use different names or pass a union of
supported types (with additional identifier that give hints of the type to be used).
Most people think its supported because they might unknowingly be using a C++
compiler to compile their C code and C+= does have function overloading.
145.What is the purpose of a function prototype?
A function prototype tells the compiler to expect a given function to be used in a given
way. That is, it tells the compiler the nature of the parameters passed to the function (the
quantity, type and order) and the nature of the value returned by the function.
146.What are inline functions?

Before reading the answer, please be aware that inline functions are non-standard C. They
are provided as compiler extensions. But, nevertheless, one should know what they are
used for.
The inline comment is a request to the compiler to copy the code into the object at every
place the function is called. That is, the function is expanded at each point of call. Most
of the advantage of inline functions comes from avoiding the overhead of calling an
actual function. Such overhead includes saving registers, setting up stack frames, and so
on. But with large functions the overhead becomes less important. Inlining tends to blow
up the size of code, because the function is expanded at each point of call.
int myfunc(int a)
{
...
}
inline int myfunc(int a)
{
...
}
Inlined functions are not the fastest, but they are the kind of better than macros (which
people use normally to write small functions).
#define myfunc(a) \
{\
...
}
The problem with macros is that the code is literally copied into the location it was called
from. So if the user passes a "double" instead of an "int" then problems could occur.
However, if this senerio happens with an inline function the compiler will complain about
incompatible types. This will save you debugging time stage.
Good time to use inline functions is
1. There is a time criticle function.
2. That is called often.
3. Its small. Remember that inline functions take more space than normal functions.
Some typical reasons why inlining is sometimes not done are:

1. The function calls itself, that is, is recursive.

2. The function contains loops such as for(;;) or while().
3. The function size is too large.
147.How to declare an array of N pointers to functions returning pointers to
functions returning pointers to characters?
Declare it this way
char *(*(*a[N])())();
Even this seems to be correct
(char*(*fun_ptr)())(*func[n])();
148.Can we declare a function that can return a pointer to a function of the same
type?
We cannot do it directly. Either have the function return a generic function pointer, with
casts to adjust the types as the pointers are passed around; or have it return a structure
containing only a pointer to a function returning that structure.
149.How can I write a function that takes a variable number of arguments? What
are the limitations with this? What is vprintf()?
The header stdarg.h provides this functionality. All functions like printf(), scanf() etc use
this functionality.
The program below uses a var_arg type of function to count the overall length of strings
passed to the function.
#include <stdarg.h>
int myfunction(char *first_argument,...)
{
int length;
va_list argp;
va_start(argp, first);
char *p;
length = strlen(first_argument);
while((p = va_arg(argp, char *)) != NULL)
{

length = length + strlen(p);

}
va_end(argp);
return(length);
}
int main()
{
int length;
length = myfunction("Hello","Hi","Hey!",(char *)NULL);
return(0);
}
How can I find how many arguments a function was passed?
Any function which takes a variable number of arguments must be able to
determine from the arguments themselves, how many of them there have been passed.
printf() and some similar functions achieve this by looking for the format string. This is
also why these functions fail badly if the format string does not match the argument list.
Another common technique, applicable when the arguments are all of the same type, is to
use a sentinel value (often 0, -1, or an appropriately-cast null pointer) at the end of the
list. Also, one can pass an explicit count of the number of variable arguments. Some older
compilers did provided a nargs() function, but it was never portable.
Is this allowed?
int f(...)
{
...
}
No! Standard C requires at least one fixed argument, in part so that you can hand it to
va_start().
So how do I get floating point numbers passed as arguments?
Arguments of type float are always promoted to type double, and types char and short int
are promoted to int. Therefore, it is never correct to invoke
va_arg(argp, float);
instead you should always use

va_arg(argp, double)
Similarly, use
va_arg(argp, int)
to retrieve arguments which were originally char, short, or int.
How can I create a function which takes a variable number of arguments and passes
them to some other function (which takes a variable number of arguments)?
You should provide a version of that other function which accepts a va_list type of
pointer.
So how can I call a function with an argument list built up at run time?
There is no portable way to do this. Instead of an actual argument list, you might want to
pass an array of generic (void *) pointers. The called function can then step through the
array, much like main() steps through char *argv[].
What is the use of vprintf(), vfprintf() and vsprintf()?
Below, the myerror() function prints an error message, preceded by the string "error: "
and terminated with a newline:
#include <stdio.h>
#include <stdarg.h>
void myerror(char *fmt, ...)
{
va_list argp;
fprintf(stderr, "error: ");
va_start(argp, fmt);
vfprintf(stderr, fmt, argp);
va_end(argp);
fprintf(stderr, "\n");
}
150.With respect to function parameter passing, what is the difference between callby-value and call-by-reference? Which method does C use?
In the case of call-by-reference, a pointer reference to a variable is passed into a function

instead of the actual value. The function's operations will effect the variable in a global as
well as local sense. Call-by-value (C's method of parameter passing), by contrast, passes a
copy of the variable's value into the function. Any changes to the variable made by
function have only a local effect and do not alter the state of the variable passed into the
function.
Does C really have pass by reference?
No.
C uses pass by value, but it can pretend doing pass by reference, by having functions that
have pointer arguments and by using the & operator when calling the function. This way,
the compiler will simulate this feature (like when you pass an array to a function, it
actually passes a pointer instead). C does not have something like the formal pass by
reference or C++ reference parameters.
How will you decide whether to use pass by reference, by pointer and by value?
The selection of the argument passing depends on the situation.
* A function uses passed data without modifying it:
o If the data object is small, such as a built-in data type or a small structure then
pass it by value.
o If the data object is an array, use a pointer because that is the only choice. Make
the pointer a pointer to const.
o If the data object is a good-sized structure, use a const pointer or a const reference
to increase program efficiency. You save the time and space needed to copy a structure or
a class design, make the pointer or reference const.
o If the data object is a class object, use a const reference. The semantics of class
design often require using a reference. The standard way to pass class object arguments is
by reference.
* A function modifies data in the calling function:
o If the data object is a built-in data type, use a pointer. If you spot a code like fixit
(&x), where x is an int, its clear that this function intends to modify x.
o If the data object is an array, use the only choice, a pointer.
o If the data object is a structure, use a reference or a pointer.
o If the data object is a class object, use a reference.
151.If I have the name of a function in the form of a string, how can I invoke that
function?
Keep a table of names and their function pointers:

int myfunc1(), myfunc2();

struct
{
char *name;
int (*func_ptr)();
} func_table[] = {"myfunc1", myfunc1,"myfunc2", myfunc2,};
Search the table for the name, and call via the associated function pointer.
152.What does the error, invalid redeclaration of a function mean?
If there is no declaration in scope then it is assumed to be declared as returning an int and
without any argument type information. This can lead to discrepancies if the function is
later declared or defined. Such functions must be declared before they are called. Also
check if there is another function in some header file with the same name.
153.How can I pass the variable argument list passed to one function to another
function.
Good question
Something like this wont work
#include <stdarg.h>
main()
{
display("Hello", 4, 12, 13, 14, 44);
}
display(char *s,...)
{
show(s,...);
}
show(char *t,...)
{
va_list ptr;
int a;

va_start(ptr,t);
a = va_arg(ptr, int);
printf("%f", a);
}
This is the right way of doing it
#include <stdarg.h>
main()
{
display("Hello", 4, 12, 13, 14, 44);
}
{
va_list ptr;
va_start(ptr, s);
show(s,ptr);
}
show(char *t, va_list ptr1)
{
int a, n, i;
a=va_arg(ptr1, int);
for(i=0; i<a; i++)
{
n=va_arg(ptr1, int);
printf("\n%d", n);
}
}
154.How do I pass a variable number of function pointers to a variable argument
(va_arg) function?

Glad that you thought about doing something like this!

Here is some code
#include <stdarg.h>
main()
{
int (*p1)();
int (*p2)();
int fun1(), fun2();
p1 = fun1;
p2 = fun2;
display("Bye", p1, p2);
}
{
int (*pp1)(), (*pp2)();
va_list ptr;
typedef int (*f)(); //This typedef is very important.
va_start(ptr,s);
pp1 = va_arg(ptr, f); // va_arg(ptr, int (*)()); would NOT have worked!
pp2 = va_arg(ptr, f);
(*pp1)();
(*pp2)();
}
fun1()
{
printf("\nHello!\n");
}

fun2()
{
printf("\nHi!\n");
}
155.Will C allow passing more or less arguments than required to a function.
It wont if the prototpe is around. It will ideally scream out with an error like
Too many arguments or Too few arguments
But if the prototype is not around, the behavior is undefined.
Try this out
#include <stdio.h>
/*
int foo(int a);
int foo2(int a, int b);
*/
int main(int a)
{
int (*fp)(int a);
a = foo();
a = foo2(1);
exit(0);
}
int foo(int a)
{
return(a);
}
int foo2(int a, int b)
{

return(a+b);
}
C Statements
156.Whats short-circuiting in C expressions?
What this means is that the right hand side of the expression is not evaluated if the left
hand side determines the outcome. That is if the left hand side is true for || or false for
&&, the right hand side is not evaluated.
157.Whats wrong with the expression a[i]=i++; ? Whats a sequence point?
Although its surprising that an expression like i=i+1; is completely valid, something like
a[i]=i++; is not. This is because all accesses to an element must be to change the value of
that variable. In the statement a[i]=i++; , the access to i is not for itself, but for a[i] and so
its invalid. On similar lines, i=i++; or i=++i; are invalid. If you want to increment the
value of i, use i=i+1; or i+=1; or i++; or ++i; and not some combination.
A sequence point is a state in time (just after the evaluation of a full expression, or
at the ||, &&, ?:, or comma operators, or just before a call to a function) at which there are
no side effects.
The ANSI/ISO C Standard states that
Between the previous and next sequence point an object shall have its stored
value modified at most once by the evaluation of an expression. Furthermore,
the prior value shall be accessed only to determine the value to be stored.
At each sequence point, the side effects of all previous expressions will be completed.
This is why you cannot rely on expressions such as a[i] = i++;, because there is no
sequence point specified for the assignment, increment or index operators, you don't
know when the effect of the increment on i occurs.
The sequence points laid down in the Standard are the following:
* The point of calling a function, after evaluating its arguments.
* The end of the first operand of the && operator.
* The end of the first operand of the || operator.
* The end of the first operand of the ?: conditional operator.
* The end of the each operand of the comma operator.
* Completing the evaluation of a full expression. They are the following:
o Evaluating the initializer of an auto object.
o The expression in an ?ordinary? statement?an expression followed by semicolon.

o The controlling expressions in do, while, if, switch or for statements.
o The other two expressions in a for statement.
o The expression in a return statement.
158.Does the ?: (ternary operator) return a lvalue? How can I assign a value to the
output of the ternary operator?
No, it does not return an "lvalue"
Try doing something like this if you want to assign a value to the output of this operator
*((mycondition) ? &var1 : &var2) = myexpression;
159.Is 5[array] the same as array[5]?
Yes!
Since array subscripting is commutative in C. That is
array[n] == *((array)+(n)) == *((n)+(array)) == n[array]
But frankly, this feature is of no use to anyone. Anyone asking this question is more or
less a fool trying to be cool.
160.What are #pragmas?
The directive provides a single, well-defined "escape hatch" which can be used for all
sorts of (nonportable) implementation-specific controls and extensions: source listing
control, structure packing, warning suppression (like lint's old /* NOTREACHED */
comments), etc.
For example
#pragma once
inside a header file is an extension implemented by some preprocessors to help make
header files idempotent (to prevent a header file from included twice).
161.What is the difference between if(0 == x) and if(x == 0)?
Nothing!. But, it's a good trick to prevent the common error of writing
if(x = 0)
The error above is the source of a lot of serious bugs and is very difficult to catch. If you
cultivate the habit of writing the constant before the ==, the compiler will complain if you
accidentally type
if(0 = x)

Of course, the trick only helps when comparing to a constant.

162.Should we use goto or not?
You should use gotos wherever it suits your needs really well. There is nothing wrong in
using them. Really.
There are cases where each function must have a single exit point. In these cases, it
makes much sense to use gotos.
myfunction()
{
if(error_condition1)
{
// Do some processing.
goto failure;
}
if(error_condition2)
{
// Do some processing.
goto failure;
}
success:
return(TRUE);
failure:
// Do some cleanup.
return(FALSE);
}
Also, a lot of coding problems lend very well to the use of gotos. The only argument
against gotos is that it can make the code a little un-readable. But if its commented
properly, it works quite fine.
163. Is ++i really faster than i = i + 1?
Anyone asking this question does not really know what he is talking about.

Any good compiler will and should generate identical code for ++i, i += 1, and i = i + 1.
Compilers are meant to optimize code. The programmer should not be bother about such
things. Also, it depends on the processor and compiler you are using. One needs to check
the compiler's assembly language output, to see which one of the different approcahes are
better, if at all.
Note that speed comes Good, well written algorithms and not from such silly tricks.
164.What do lvalue and rvalue mean?
An lvalue is an expression that could appear on the left-hand sign of an assignment (An
object that has a location). An rvalue is any expression that has a value (and that can
appear on the right-hand sign of an assignment).
The lvalue refers to the left-hand side of an assignment expression. It must always
evaluate to a memory location. The rvalue represents the right-hand side of an assignment
expression; it may have any meaningful combination of variables and constants.
165.What does the term cast refer to? Why is it used?
Casting is a mechanism built into C that allows the programmer to force the conversion
of data types. This may be needed because most C functions are very particular about the
data types they process. A programmer may wish to override the default way the C
compiler promotes data types.
166.What is the difference between a statement and a block?
A statement is a single C expression terminated with a semicolon. A block is a
series of statements, the group of which is enclosed in curly-braces.
167.Can comments be nested in C?
No
168.What is type checking?
The process by which the C compiler ensures that functions and operators use data of the
appropriate type(s). This form of check helps ensure the semantic correctness of the
program.
169.Why can't you nest structure definitions?
This is a trick question!
You can nest structure definitions.
struct salary
{
char empname[20];

struct
{
int dearness;
}
allowance;
}employee;
170.What is a forward reference?
It is a reference to a variable or function before it is defined to the compiler. The
cardinal rule of structured languages is that everything must be defined before it can be
used. There are rare occasions where this is not possible. It is possible (and sometimes
necessary) to define two functions in terms of each other. One will obey the cardinal rule
while the other will need a forward declaration of the former in order to know of the
former's existence.
171.What is the difference between the & and && operators and the | and ||
operators?
& and | are bitwise AND and OR operators respectively. They are usually used to
manipulate the contents of a variable on the bit level. && and || are logical AND and OR
operators respectively. They are usually used in conditionals
172.Is C case sensitive (ie: does C differentiate between upper and lower case
letters)?
Yes, ofcourse!
173.Can goto be used to jump across functions?
No!
This wont work
main()
{
int i=1;
while (i<=5)
{
printf("%d",i);
if (i>2)

goto here;
i++;
}
}
fun()
{
here:
printf("PP");
}
174.Whats wrong with #define myptr int *?
#define myptr int *
myptr p, q;
Only p will be a pointer to an int, and q will just be an int!.
175.What purpose do #if, #else, #elif, #endif, #ifdef, #ifndef serve?
The following preprocessor directives are used for conditional compilation. Conditional
compilation allows statements to be included or omitted based on conditions at compile
time.
#if
#else
#elif
#endif
#ifdef
#ifndef
In the following example, the printf statements are compiled when the symbol DEBUG is
defined, but not compiled otherwise
/* remove to suppress debug printf's*/
#define DEBUG
...
x = ....
#ifdef DEBUG
printf( "x=%d\n" );
#endif...
y = ....;
#ifdef DEBUG
printf( "y=%d\n" );
#endif...
#if, #else, #elif statements
#if directive
* #if is followed by a intger constant expression.
* If the expression is not zero, the statement(s) following the #if are compiled,
otherwise they are ignored.
* #if statements are bounded by a matching #endif, #else or #elif
* Macros, if any, are expanded, and any undefined tokens are replaced with 0 before
the constant expression is evaluated
* Relational operators and integer operators may be used
Expression examples
#if 1
#if 0
#if ABE == 3
#if ZOO < 12
#if ZIP == 'g'
#if (ABE + 2 - 3 * ZIP) > (ZIP - 2)
In most uses, expression is simple relational, often equality test
#if SPARKY == '7'
#else directive
* #else marks the beginning of statement(s) to be compiled if the preceding #if or #elif
expression is zero (false)
* Statements following #else are bounded by matching #endif
Examples
#if OS = 'A'
system( "clear" );
#else
system( "cls" );
#endif
#elif directive
* #elif adds an else-if branch to a previous #if
* A series of #elif's provides a case-select type of structure
* Statement(s) following the #elif are compiled if the expression is not zero, ignored
otherwise
* Expression is evaluated just like for #if
Examples
#if TST == 1
z = fn1( y );
#elif TST == 2
z = fn2( y, x );
#elif TST == 3
z = fn3( y, z, w );
#endif
...
#if ZIP == 'g'
rc = gzip( fn );
#elif ZIP == 'q'
rc = qzip( fn );
#else
rc = zip( fn );
#endif
#ifdef and #ifndef directives

Testing for defined macros with #ifdef, #ifndef, and defined()
* #ifdef is used to include or omit statements from compilation depending of whether a
macro name is defined or not.
* Often used to allow the same source module to be compiled in different
environments (UNIX/ DOS/MVS), or with different options (development/production).
* #ifndef similar, but includes code when macro name is not defined.
Examples
#ifdef TESTENV
printf( "%d ", i );
#endif
#ifndef DOS
#define LOGFL "/tmp/loga.b";
#else
#define LOGFL "c:\\tmp\\log.b";
#endif
defined() operator
* defined(mac), operator is used with #if and #elif and gives 1 (true) if macro name
mac is defined, 0 (false) otherwise.
* Equivalent to using #ifdef and #ifndef, but many shops prefer #if with defined(mac)
or !defined(mac)
Examples
#if defined(TESTENV)
printf( "%d ", i );
#endif
#if !defined(DOS)
#define LOGFL "/tmp/loga.b";
#else
#define LOGFL "c:\\tmp\\log.b";

#endif
Nesting conditional statements
Conditional compilation structures may be nested:
#if defined(UNIX)
#if LOGGING == 'y'
#define LOGFL "/tmp/err.log"
#else
#define LOGFL "/dev/null"
#endif
#elif defined( MVS )
#if LOGGING == 'y'
#define LOGFL "TAP.AVS.LOG"
#else
#define LOGFL "NULLFILE"
#endif
#elif defined( DOS )
#if LOGGING == 'y'
#define LOGFL "C:\\tmp\\err.log"
#else
#define LOGFL "nul"
#endif
#endif
176.Can we use variables inside a switch statement? Can we use floating point
numbers? Can we use expressions?
No
The only things that case be used inside a switch statement are constants or enums.
Anything else will give you a
constant expression required

error. That is something like this is not valid

switch(i)
{
case 1:
// Something;
break;
case j:
// Something;
break;
}
So is this. You cannot switch() on strings
switch(i)
{
case "string1" :
// Something;
break;
case "string2" :
// Something;
break;
}
This is valid, however
switch( i )
{
case 1:
// Something;
break;
case 1*2+4:

// Something;
break;
}
This is also valid, where t is an enum
switch( i )
{
case 1:
// Something;
break;
case t:
// Something;
break;
}
Also note that the default case does not require a break; if and only if its at the end of the
switch() statement. Otherwise, even the default case requires a break;
177.What is more efficient? A switch() or an if() else()?
Both are equally efficient. Usually the compiler implements them using jump
instructions. But each of them has their own unique advantages.
178.What is the difference between a deep copy and a shallow copy?
Deep copy involves using the contents of one object to create another instance of
the same class. In a deep copy, the two objects may contain ht same information but the
target object will have its own buffers and resources. the destruction of either object will
not affect the remaining object. The overloaded assignment operator would create a deep
copy of objects.
Shallow copy involves copying the contents of one object into another instance of the
same class thus creating a mirror image. Owing to straight copying of references and
pointers, the two objects will share the same externally contained contents of the other
object to be unpredictable.
Using a copy constructor we simply copy the data values member by member. This
method of copying is called shallow copy. If the object is a simple class, comprised of
built in types and no pointers this would be acceptable. This function would use the
values and the objects and its behavior would not be altered with a shallow copy, only the
addresses of pointers that are members are copied and not the value the address is

pointing to. The data values of the object would then be inadvertently altered by the
function. When the function goes out of scope, the copy of the object with all its data is
popped off the stack. If the object has any pointers a deep copy needs to be executed.
With the deep copy of an object, memory is allocated for the object in free store and the
elements pointed to are copied. A deep copy is used for objects that are returned from a
function.
C Arrays
179.How to write functions which accept two-dimensional arrays when the width is
not known before hand?
Try something like
myfunc(&myarray[0][0], NO_OF_ROWS, NO_OF_COLUMNS);
void myfunc(int *array_pointer, int no_of_rows, int no_of_columns)
{
// myarray[i][j] is accessed as array_pointer[i * no_of_columns + j]
}
180.Is char a[3] = "abc"; legal? What does it mean?
It declares an array of size three, initialized with the three characters 'a', 'b', and 'c',
without the usual terminating '\0' character. The array is therefore not a true C string and
cannot be used with strcpy, printf %s, etc. But its legal.
181.If a is an array, is a++ valid?
No
You will get an error like
Error message : Lvalue required in function main.
Doing a++ is asking the compiler to change the base address of the array. This the only
thing that the compiler remembers about an array once its declared and it wont allow you
to change the base address. If it allows, it would be unable to remember the beginning of
the array.
C Variables
182.What is the difference between the declaration and the definition of a variable?
The definition is the one that actually allocates space, and provides an
initialization value, if any.
There can be many declarations, but there must be exactly one definition. A definition
tells the compiler to set aside storage for the variable. A declaration makes the variable

known to parts of the program that may wish to use it. A variable might be defined and
declared in the same statement.
183.Do Global variables start out as zero?
Glad you asked!
Uninitialized variables declared with the "static" keyword are initialized to zero. Such
variables are implicitly initialized to the null pointer if they are pointers, and to 0.0F if
they are floating point numbers.
Local variables start out containing garbage, unless they are explicitly initialized.
Memory obtained with malloc() and realloc() is likely to contain junk, and must be
initialized. Memory obtained with calloc() is all-bits-0, but this is not necessarily useful
for pointer or floating-point values (This is in contrast to Global pointers and Global
floating point numbers, which start as zeroes of the right type).
184.Does C have boolean variable type?
No, C does not have a boolean variable type. One can use ints, chars, #defines or enums
to achieve the same in C.
#define TRUE 1
#define FALSE 0
enum bool {false, true};
An enum may be good if the debugger shows the names of enum constants when
examining variables.
185.Where may variables be defined in C?
Outside a function definition (global scope, from the point of definition
downward in the source code). Inside a block before any statements other than variable
declarations (local scope with respect to the block).
186.To what does the term storage class refer? What are auto, static, extern, volatile,
const classes?
This is a part of a variable declaration that tells the compiler how to interpret the
variable's symbol. It does not in itself allocate storage, but it usually tells the compiler
how the variable should be stored. Storage class specifiers help you to specify the type of
storage used for data objects. Only one storage class specifier is permitted in a declaration
this makes sense, as there is only one way of storing things and if you omit the storage
class specifier in a declaration, a default is chosen. The default depends on whether the
declaration is made outside a function (external declarations) or inside a function (internal
declarations). For external declarations the default storage class specifier will be extern
and for internal declarations it will be auto. The only exception to this rule is the
declaration of functions, whose default storage class specifier is always extern.

Here are C's storage classes and what they signify:

* auto - local variables.
* static - variables are defined in a nonvolatile region of memory such that they retain
their contents though out the program's execution.
* register - asks the compiler to devote a processor register to this variable in order to
speed the program's execution. The compiler may not comply and the variable looses it
contents and identity when the function it which it is defined terminates.
* extern - tells the compiler that the variable is defined in another module.
In C, const and volatile are type qualifiers. The const and volatile type qualifiers are
completely independent. A common misconception is to imagine that somehow const is
the opposite of volatile and vice versa. This is wrong. The keywords const and volatile
can be applied to any declaration, including those of structures, unions, enumerated types
or typedef names. Applying them to a declaration is called qualifying the
declaration?that's why const and volatile are called type qualifiers, rather than type
specifiers.
* const means that something is not modifiable, so a data object that is declared with
const as a part of its type specification must not be assigned to in any way during the run
of a program. The main intention of introducing const objects was to allow them to be put
into read-only store, and to permit compilers to do extra consistency checking in a
program. Unless you defeat the intent by doing naughty things with pointers, a compiler
is able to check that const objects are not modified explicitly by the user. It is very likely
that the definition of the object will contain an initializer (otherwise, since you can't
assign to it, how would it ever get a value?), but this is not always the case. For example,
if you were accessing a hardware port at a fixed memory address and promised only to
read from it, then it would be declared to be const but not initialized.
* volatile tells the compiler that other programs will be modifying this variable in
addition to the program being compiled. For example, an I/O device might need write
directly into a program or data space. Meanwhile, the program itself may never directly
access the memory area in question. In such a case, we would not want the compiler to
optimize-out this data area that never seems to be used by the program, yet must exist for
the program to function correctly in a larger context. It tells the compiler that the object is
subject to sudden change for reasons which cannot be predicted from a study of the
program itself, and forces every reference to such an object to be a genuine reference.
* const volatile - Both constant and volatile.
187.What does the typedef keyword do?
This keyword provides a short-hand way to write variable declarations. It is not a true
data typing mechanism, rather, it is syntactic "sugar coating".
For example:
typedef struct node

{
int value;
struct node *next;
}mynode;
This can later be used to declare variables like this
mynode *ptr1;
and not by the lengthy expression
struct node *ptr1;
There are three main reasons for using typedefs:
* It makes the writing of complicated declarations a lot easier. This helps in
eliminating a lot of clutter in the code.
* It helps in achieving portability in programs. That is, if we use typedefs for data types
that are machine dependent, only the typedefs need to change when the program is ported
to a new platform.
* It helps in providing better documentation for a program. For example, a node of a
doubly linked list is better understood as ptrToList than just a pointer to a complicated
structure.
188.What is the difference between constants defined through #define and the
constant keyword?
A constant is similar to a variable in the sense that it represents a memory location (or
simply, a value). It is different from a normal variable, in that it cannot change it's value
in the proram - it must stay for ever stay constant. In general, constants are a useful
because they can prevent program bugs and logical errors(errors are explained later).
Unintended modifications are prevented from occurring. The compiler will catch attempts
to reassign new values to constants.
Constants may be defined using the preprocessor directive #define. They may also be
defined using the const keyword.
So whats the difference between these two?
#define ABC 5
and
const int abc = 5;

There are two main advantages of the second one over the first technique. First, the type
of the constant is defined. "pi" is float. This allows for some type checking by the
compiler. Second, these constants are variables with a definite scope. The scope of a
variable relates to parts of your program in which it is defined.
There is also one good use of the important use of the const keyword. Suppose you want
to make use of some structure data in some function. You will pass a pointer to that
structure as argument to that function. But to make sure that your structure is readonly
inside the function you can declare the structure argument as const in function prototype.
This will prevent any accidental modification of the structure values inside the function.
189.What are Trigraph characters?
These are used when you keyboard does not support some special characters
??=
??(
??)
??<
??>
??!
??/
??'
??-
190.How are floating point numbers stored? Whats the IEEE format?
IEEE Standard 754 floating point is the most common representation today for real
numbers on computers, including Intel-based PC's, Macintoshes, and most Unix
platforms.
IEEE floating point numbers have three basic components: the sign, the exponent, and the
mantissa. The mantissa is composed of the fraction and an implicit leading digit
(explained below). The exponent base(2) is implicit and need not be stored.
The following figure shows the layout for single (32-bit) and double (64-bit) precision
floating-point values. The number of bits for each field are shown (bit ranges are in
square brackets):
Sign Exponent Fraction Bias
-------------------------------------------------Single Precision 1 [31] 8 [30-23] 23 [22-00] 127

Double Precision 1 [63] 11 [62-52] 52 [51-00] 1023

The sign bit is as simple as it gets. 0 denotes a positive number; 1 denotes a negative
number. Flipping the value of this bit flips the sign of the number.
The exponent field needs to represent both positive and negative exponents. To do this, a
bias is added to the actual exponent in order to get the stored exponent. For IEEE singleprecision floats, this value is 127. Thus, an exponent of zero means that 127 is stored in
the exponent field. A stored value of 200 indicates an exponent of (200-127), or 73. For
reasons discussed later, exponents of -127 (all 0s) and +128 (all 1s) are reserved for
special numbers. For double precision, the exponent field is 11 bits, and has a bias of
1023.
The mantissa, also known as the significand, represents the precision bits of the number.
It is composed of an implicit leading bit and the fraction bits. To find out the value of the
implicit leading bit, consider that any number can be expressed in scientific notation in
many different ways. For example, the number five can be represented as any of these:
5.00 100
0.05 10 ^ 2
5000 10 ^ -3
In order to maximize the quantity of representable numbers, floating-point numbers are
typically stored in normalized form. This basically puts the radix point after the first nonzero digit. In normalized form, five is represented as 5.0 100. A nice little optimization
is available to us in base two, since the only possible non-zero digit is 1. Thus, we can
just assume a leading digit of 1, and don't need to represent it explicitly. As a result, the
mantissa has effectively 24 bits of resolution, by way of 23 fraction bits.
So, to sum up:
1. The sign bit is 0 for positive, 1 for negative.
2. The exponent's base is two.
3. The exponent field contains 127 plus the true exponent for single-precision,
or 1023 plus the true exponent for double precision.
4. The first bit of the mantissa is typically assumed to be 1.f, where f is the
field of fraction bits.
C Structures
191.Can structures be assigned to variables and passed to and from functions?
Yes, they can!
But note that when structures are passed, returned or assigned, the copying is done only at

one level (The data pointed to by any pointer fields is not copied!.
192.Can we directly compare two structures using the == operator?
No, you cannot!
The only way to compare two structures is to write your own function that compares the
structures field by field. Also, the comparison should be only on fields that contain data
(You would not want to compare the next fields of each structure!).
A byte by byte comparison (say using memcmp()) will also fail. This is because the
comparison might fonder on random bits present in unused "holes" in the structure
(padding used to keep the alignment of the later fields correct). So a memcmp() of the
two structure will almost never work. Also, any strings inside the strucutres must be
compared using strcmp() for similar reasons.
There is also a very good reason why structures can be compared directly - unions!. It is
because of unions that structures cannot be compared for equality. The possibility that a
structure might contain a union makes it hard to compare such structures; the compiler
can't tell what the union currently contains and so wouldn't know how to compare the
structures. This sounds a bit hard to swallow and isn't 100% true, most structures don't
contain unions, but there is also a philosophical issue at stake about just what is meant by
"equality" when applied to structures. Anyhow, the union business gives the Standard a
good excuse to avoid the issue by not supporting structure comparison.
If your structures dont have stuff like floating point numbers, pointers, unions etc..., then
you could possibly do a memset() before using the structure variables..
memset (&myStruct, 0, sizeof(myStruct));
This will set the whole structure (including the padding) to all-bits-zero. We can then do
a memcmp() on two such structures.
memcmp (&s1,&s2,sizeof(s1));
But this is very risky and can end up being a major bug in your code!. So try not to do this
kind of memcmp() operations on structures variables as far as possible!
193.Can we pass constant values to functions which accept structure arguments?
If you are trying to do something like this
myfunction((struct mystruct){10,20});
then, it wont work!. Use a temporary structure variable.
194.How does one use fread() and fwrite()? Can we read/write structures to/from
files?
Its easy to write a structure into a file using fwrite()

fwrite(&somestruct, sizeof somestruct, 1, fp);

A similat fread() invocation can read it back in. But, data files so written will not be
portable (specially if they contain floating point numbers). Also that if the structure has
any pointers, only the pointer values will be written, and they are most unlikely to be
valid when read back in. One must use the "rb/wb" flag when opening the files.
A more portable solution is to write code to write and read a structure, field-by-field, in a
portable (perhaps ASCII) way!. This is simpler to port and maintain.
195.Why do structures get padded? Why does sizeof() return a larger size?
Padding enables the CPU to access the members faster. If they are not aligned (say to
word boundaries), then accessing them might take up more time. So the padding results in
faster access. This is also required to ensure that alignment properties are preserved when
an array of contiguous structures is allocated. Even if the structure is not part of an array,
the end padding remains, so that sizeof() can always return a consistent size.
196.Can we determine the offset of a field within a structure and directly access that
element?
The offsetof() macro(<stddef.h>) does exactly this.
A probable implementation of the macro is
#define offsetof(type, mem) ((size_t)((char *)&((type *)0)->mem - (char *)(type *)0))
This can be used as follows. The offset of field a in struct mystruct is
offset_of_a = offsetof(struct mystruct, a)
If structpointer is a pointer to an instance of this structure, and field a is an int, its value
can be set indirectly with
*(int *)((char *)structpointer + offset_of_a) = some_value;
197.What are bit fields in structures?
To avoid wastage of memory in structures, a group of bits can be packed together into an
integer and its called a bit field.
struct tag-name
{
data-type name1:bit-length;
data-type name2:bit-length;
...
...

data-type nameN:bit-length;
}
A real example
struct student;
{
char name[30];
unsigned sex:1;
unsigned age:5;
unsigned rollno:7;
unsigned branch:2;
};
struct student a[100];
scanf("%d", &sex);
a[i].sex=sex;
There are some limitations with respect to these bit fields, however:
1. Cannot scanf() directly into bit fields.
2. Pointers cannot be used on bit fields to access them.
3. Cannot have an array of bit fields.
The main use of bitfields is either to allow tight packing of data or to be able to specify
the fields within some externally produced data files. C gives no guarantee of the ordering
of fields within machine words, so if you do use them for the latter reason, you program
will not only be non-portable, it will be compiler-dependent too. The Standard says that
fields are packed into ?storage units?, which are typically machine words. The packing
order, and whether or not a bitfield may cross a storage unit boundary, are
implementation defined. To force alignment to a storage unit boundary, a zero width field
is used before the one that you want to have aligned. Be careful using them. It can require
a surprising amount of run-time code to manipulate these things and you can end up using
more space than they save. Bit fields do not have addresses?you can't have pointers to
them or arrays of them.
198.What is a union? Where does one use unions? What are the limitations of
unions?
A union is a variable type that can contain many different variables (like a structure), but

only actually holds one of them at a time (not like a structure). This can save memory if
you have a group of data where only one of the types is used at a time. The size of a union
is equal to the size of it's largest data member. The C compiler allocates just enough
space for the largest member. This is because only one member can be used at a time, so
the size of the largest, is the most you will need. Here is an example:
union person
{
int age;
char name[100];
}person1;
The union above could be used to either store the age or it could be used to hold the name
of the person. There are cases when you would want one or the other, but not both (This
is a bad example, but you get the point). To access the fields of a union, use the dot
operator(.) just as you would for a structure. When a value is assigned to one member, the
other member(s) get whipped out since they share the same memory. Using the example
above, the precise time can be accessed like this:
person1.age;
In larger programs it may be difficult to keep track of which field is the currently used
field. This is usually handled by using another variable to keep track of that. For example,
you might use an integer called field. When field equals one, the age is used. If field is
two, then name is used. The C compiler does no more than work out what the biggest
member in a union can be and allocates enough storage (appropriately aligned if
neccessary). In particular, no checking is done to make sure that the right sort of use is
made of the members. That is your task, and you'll soon find out if you get it wrong. The
members of a union all start at the same address?there is guaranteed to be no padding in
front of any of them.
ANSI Standard C allows an initializer for the first member of a union. There is no
standard way of initializing any other member (nor, under a pre-ANSI compiler, is there
generally any way of initializing a union at all).
It is because of unions that structures cannot be compared for equality. The possibility
that a structure might contain a union makes it hard to compare such structures; the
compiler can't tell what the union currently contains and so wouldn't know how to
compare the structures. This sounds a bit hard to swallow and isn't 100% true, most
structures don't contain unions, but there is also a philosophical issue at stake about just
what is meant by "equality" when applied to structures. Anyhow, the union business gives
the Standard a good excuse to avoid the issue by not supporting structure comparison.
C Macros
199.How should we write a multi-statement macro?

This is the correct way to write a multi statement macro.

#define MYMACRO(argument1, argument2) do { \
stament1; \
stament2; \
} while(1) /* no trailing semicolon */
200.How can I write a macro which takes a variable number of arguments?
One can define the macro with a single, parenthesized "argument" which in the macro
expansion becomes the entire argument list, parentheses and all, for a function such as
printf():
#define DEBUG(args) (printf("DEBUG: "), printf args)
if(n != 0) DEBUG(("n is %d\n", n));
The caller must always remember to use the extra parentheses. Other possible solutions
are to use different macros depending on the number of arguments. C9X will introduce
formal support for function-like macros with variable-length argument lists. The
notation ... will appear at the end of the macro "prototype" (just as it does for varargs
functions).
201.What is the token pasting operator and stringizing operator in C?
Token pasting operator
ANSI has introduced a well-defined token-pasting operator, ##, which can be used like
this:
#define f(g,g2) g##g2
main()
{
int var12=100;
printf("%d",f(var,12));
}
O/P
100
Stringizing operator
#define sum(xy) printf(#xy " = %f\n",xy);
main()
{
sum(a+b); // As good as printf("a+b = %f\n", a+b);
}
So what does the message "warning: macro replacement within a string literal" mean?
#define TRACE(var, fmt) printf("TRACE: var = fmt\n", var)
TRACE(i, %d);
gets expanded as
printf("TRACE: i = %d\n", i);
In other words, macro parameters were expanded even inside string literals and character
constants. Macro expansion is *not* defined in this way by K&R or by Standard C. When
you do want to turn macro arguments into
strings, you can use the new # preprocessing operator, along with string literal
concatenation:
#define TRACE(var, fmt) printf("TRACE: " #var " = " #fmt "\n", var)
See and try to understand this special application of the strigizing operator!
#define Str(x) #x
#define Xstr(x) Str(x)
#define OP plus
char *opname = Xstr(OP); //This code sets opname to "plus" rather than "OP".
Here are some more examples
Example1
Define a macro DEBUG such that the following program
int main()
{
int x=4;
float a = 3.14;
char ch = 'A';
DEBUG(x, %d);
DEBUG(a, %f);
DEBUG(ch, %c);
}
outputs
DEBUG: x=4
DEBUG: y=3.140000
DEBUG: ch=A
The macro would be
#define DEBUG(var, fmt) printf("DEBUG:" #var "=" #fmt "\n", var);
Example2
Write a macro PRINT for the following program
int main()
{
int x=4, y=4, z=5;
int a=1, b=2, c=3;
PRINT(x,y,z);
PRINT(a,b,c);
}
such that it outputs
x=4 y=4 z=5
a=1 b=2 c=3
Here is a macro that will do this
#define PRINT(v1,v2,v3) printf("\n" #v1 "=%d" #v2 "=%d" #v3 "=%d", v1, v2, v3);
202.Define a macro called SQR which squares a number.
This is the wrong way of doing it.
#define SQR(x) x*x
Thats because, something like

#include stdio.h>
#define SQR(x) x*x
int main()
{
int i;
i = 64/SQR(4);
printf("[%d]",i);
return(0);
}
will produce an output of 64, because of how macros work (The macro call square(4) will
substituted by 4*4 so the expression becomes i = 64/4*4 . Since / and * has equal priority
the expression will be evaluated as (64/4)*4 i.e. 16*4 = 64).
This is the right way of doing it.
#define SQR(x) ((x)*(x))
But, if x is an expression with side effects, the macro evaluates them twice. The
following is one way to do it while evaluating x only once.
#include <math.h>
#define SQR(x) pow((x),2.0)
C Headers
203.What should go in header files? How to prevent a header file being included
twice? Whats wrong with including more headers?
Generally, a header (.h) file should have (A header file need not have a .h extension, its
just a convention):
1. Macro definitions (preprocessor #defines).
2. Structure, union, and enumeration declarations.
3. Any typedef declarations.
4. External function declarations.
5. Global variable declarations.

Put declarations / definitions in header files if they will be shared between several other
files. If some of the definitions / declarations should be kept private to some .c file, don;t
add it to the header files.
How does one prevent a header file from included twice?. Including header files twice
can lead to multiple-definition errors.
There are two methods to prevent a header file from included twice
Method1
#ifndef HEADER_FILE
#define HEADER_FILE
...header file contents...
#endif
Method2
A line like
#pragma once
inside a header file is an extension implemented by some preprocessors to help make
header files idempotent (to prevent a header file from included twice).
So, what's the difference between #include <> and #include "" ?
The <> syntax is typically used with Standard or system-supplied headers, while "" is
typically used for a program's own header files. Headers named with <> syntax are
searched for in one or more standard places. Header files named with font
class=announcelink>"" syntax are first searched for in the "current directory," then (if not
found) in the same standard places.
What happens if you include unwanted headers?
You will end up increasing the size of your executables!
204.Is there a limit on the number of characters in the name of a header file?
The limitation is only that identifiers be significant in the first six characters, not that they
be restricted to six characters in length.
C File operations
205.How do stat(), fstat(), vstat() work? How to check whether a file exists?
The functions stat(), fstat(), lstat() are used to get the file status.
Here are their prototypes
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
int stat(const char *file_name, struct stat *buf);
int fstat(int file_desc, struct stat *buf);
int lstat(const char *file_name, struct stat *buf);
These functions return information about the specified file. You do not need any access
rights to the file to get this information but you need search rights to all directories named
in the path leading to the file.
stat
stats the file pointed to by file_name and fills in buf.
lstat
identical to stat, except in the case of a symbolic link,

where the link itself is stat-ed, not the file that it refers to.
fstat
identical to stat, only the open file pointed to by file_desc

is stated in place of file_name.
They all return a stat structure, which contains the following fields:
struct stat {
dev_t
st_dev;
ino_t
st_ino;
mode_t
/* device */
/* inode */
st_mode;
/* protection */
nlink_t
st_nlink;
/* number of hard links */
uid_t
st_uid;
/* user ID of owner */
gid_t
st_gid;
/* group ID of owner */
dev_t
st_rdev;
off_t
st_size;
/* device type (if inode device) */

/* total size, in bytes */
unsigned long st_blksize; /* blocksize for filesystem I/O */

unsigned long st_blocks; /* number of blocks allocated */
time_t
st_atime;
time_t
st_mtime;
/* time of last access */

/* time of last modification */
time_t
st_ctime;
/* time of last change */
};
On success, zero is returned. On error, -1 is returned, and errno is set appropriately.
Here is a small piece of code which returns the size of a file by accessing the st_size
member of the stat structure.
boolean get_file_size(char *file_path,int *file_size)
{
struct stat stat_buffer;
if (stat((char *)file_path, &stat_buffer)!=0)
return(FALSE);
*file_size = stat_buffer.st_size;
return(TRUE);
}
So how do we check if a file exists or not?
Use functions like stat() as used above to find out if a file exits or not. Also, one can use
fopen(). When using fopen(), just open for reading and close immediately. If the file does
not exists, fopen() will given an error.
206.How can I insert or delete a line (or record) in the middle of a file?
The only way is to rewrite the file.
207.How can I recover the file name using its file descriptor?
Have a wrapper around fopen() to remember the names of files as you open them.
208.How can I delete a file? How do I copy files? How can I read a directory in a C
program?
Deleting a file
The Standard C Library function is remove(). If thats not there, use unlink().
Copying a file
Directly use system() to invoke the operating system's copy() utility, or open the source
and destination files, read characters or blocks of characters from the source file, and
write them to the destination file.
How to read directories?
Use the opendir() and readdir() functions, which are part of the POSIX standard and are
available on most Unix variants.
209.Whats the use of fopen(), fclose(), fprintf(), getc(), putc(), getw(), putw(), fscanf
(), feof(), ftell(), fseek(), rewind(), fread(), fwrite(), fgets(), fputs(), freopen(), fflush(),
ungetc()?
Whew!, thats a huge list.
fopen()
This function is used to open a stream.
FILE *fp;
fp = fopen("filename","mode");
fp = fopen("data","r");
fp = fopen("results","w");
Modes
"r"
-> Open for reading.
"w"
-> Open for writing.
"a"
-> Open for appending.
"r+" -> Both reading and writing.

"w+" -> Both reading and writing, create new file if it exists,
"a+" -> Open for both reading and appending.
fopen()
fclose() is used to close a stream .
fclose(fp);
putc(), getc(), putw(), getw(), fgetc(), getchar(), putchar(), fputs()
These functions are used to read/write different types of data to the stream.
putc(ch,fp);
c=getc(fp);
putw(integer, fp);
integer=getw(fp);
fprintf(), fscanf()
Read/Write formatted data from/to the stream.

fprintf(fp,"control string",list);
fscanf(fp,"control string", list);
foef()
Check the status of a stream
if(feof(fp)!=0)
ftell(), fseek(), rewind(), fgetpos(), fsetpos()
Reposition the file pointer of a stream
n=ftell(fp); //Relative offset (in bytes) of the current position.
rewind(fp);
fseek(fp, offset, position);
Position can be
0->start of file
1->current position
2->end of file
fseek(fp,0L,0); // Same as rewind.
fseek(fp,0L,1); // Stay at current position.
fseek(fp,0L,2); // Past end of file.
fseek(fp,m,0); // Move to (m+1) byte.
fseek(fp,m,1) // Go forward m bytes.
fseek(fp,-m,1); // Go backward m bytes from current position.
fseek(fp,-m,2); // Go backward from end of file.
fread(), fwrite()
Binary stream input/output.
fwrite(&customer, sizeof(record),1,fp);
fread(&customer,sizeof(record),1,fp);
Here is a simple piece of code which reads from a file
#include <stdio.h>
#include <conio.h>
int main()
{
FILE *f;
char buffer[1000];
f=fopen("E:\\Misc\\__Temp\\FileDrag\\Main.cpp","r");
if(f)
{
printf("\nOpenened the file!\n");
while(fgets(buffer,1000,f))
{
printf("(%d)-> %s\n",strlen(buffer),buffer);
}
}
fclose(f);
getch();
return(0);
}
210.How to check if a file is a binary file or an ascii file?
Here is some sample C code. The idea is to check the bytes in the file to see if they are
ASCII or not...
#include <stdio.h>
int main(int argc, char *argv[])
{
unsigned char ch;
FILE *file;
int binaryFile = FALSE;
file = fopen(<FILE_PATH>, "rb");
// Open in Binary mode for the first
time.
while((fread(&ch, 1, 1, file) == 1) && (binaryFile == FALSE))
{
if(ch < 9 || ch == 11 || (ch > 13 && ch < 32) || ch == 255)
{
binaryFile = 1;
}
}
fclose(file);
if(binaryFile)
file = fopen(<FILE_PATH>, "rb");
else
file = fopen(<FILE_PATH>, "r");
if(binaryFile)
{
while(fread(&ch, 1, 1, file) == 1)
{
// Do whatever you want here with the binary file byte...
}
}
else
{
while(fread(&ch, 1, 1, file) == 1)
{
// This is ASCII data, can easily print it!
putchar(ch);
}

}
fclose(file);
return(0);
}
C Declarations and Definitions
211.What is the difference between char *a and char a[]?
There is a lot of difference!
char a[] = "string";
char *a = "string";
The declaration char a[] asks for space for 7 characters and see that its known by the
name "a". In contrast, the declaration char *a, asks for a place that holds a pointer, to be
known by the name "a". This pointer "a" can point anywhere. In this case its pointing to
an anonymous array of 7 characters, which does have any name in particular. Its just
present in memory with a pointer keeping track of its location.
char a[] = "string";
+----+----+----+----+----+----+------+
a: | s | t | r | i | n | g | '\0' |
+----+----+----+----+----+----+------+
a[0] a[1] a[2] a[3] a[4] a[5] a[6]
char *a = "string";
+-----+
+---+---+---+---+---+---+------+
| a: | *======> | s | t | r | i | n | g | '\0' |
+-----+
+---+---+---+---+---+---+------+
Pointer
Anonymous array
It is curcial to know that a[3] generates different code depending on whether a is an array
or a pointer. When the compiler sees the expression a[3] and if a is an array, it starts at
the location "a", goes three elements past it, and returns the character there. When it sees
the expression a[3] and if a is a pointer, it starts at the location "a", gets the pointer value
there, adds 3 to the pointer value, and gets the character pointed to by that value.
If a is an array, a[3] is three places past a. If a is a pointer, then a[3] is three places past
the memory location pointed to by a. In the example above, both a[3] and a[3] return the
same character, but the way they do it is different!
Doing something like this would be illegal.
char *p = "hello, world!";
p[0] = 'H';
212.How can I declare an array with only one element and still access elements
beyond the first element (in a valid fashion)?
This is a trick question :
There is a way to do this. Using structures.
struct mystruct {
int value;
int length;
char string[1];
};
Now, when allocating memory to the structure using malloc(), allocate more memory
than what the structure would normally require!. This way, you can access beyond string
[0] (till the extra amount of memory you have allocated, ofcourse).
But remember, compilers which check for array bounds carefully might throw warnings.
Also, you need to have a length field in the structure to keep a count of how big your one
element array really is :).
A cleaner way of doing this is to have a pointer instead of the one element array and
allocate memory for it seperately after allocating memory for the structure.
struct mystruct
{
int value;
char *string; // Need to allocate memory using malloc() after allocating memory
for the strucure.
};
213.What is the difference between enumeration variables and the preprocessor
#defines?
Functionality
Enumerations
#defines
Numeric values assigned automatically?
YES
NO
Can the debugger display the symbolic values?
YES
NO
Obey block scope?

Control over the size of the variables?
YES
NO
NO
NO
C Functions - built-in
214.Whats the difference between gets() and fgets()? Whats the correct way to use
fgets() when reading a file?
Unlike fgets(), gets() cannot be told the size of the buffer it's to read into, so it cannot be
prevented from overflowing that buffer. As a general rule, always use fgets(). fgets() also
takes in the size of the buffer, so that the end of the array cannot be overwritten.
fgets(buffer, sizeof(buffer), stdin);
if((p = strchr(buffer, '\n')) != NULL)
{
*p = '\0';
}
Also, fgets() does not delete the trailing "\n", as gets().
So whats the right way to use fgets() when reading a file?
while(!feof(inp_file_ptr))
{
fgets(buffer, MAX_LINE_SIZE, inp_file_ptr);
fputs(buffer, out_file_ptr);
}
The code above will copy the last line twice! This is because, in C, end-of-file is only
indicated after an input routine has tried to read, and failed. We should just check the
return value of the input routine (in this case, fgets() will return NULL on end-of-file);
often, you don't need to use feof() at all.
This is the right way to do it
while(fgets(buffer, MAX_LINE_SIZE, inp_file_ptr))
{
fputs(buffer, out_file_ptr);

}
215.How can I have a variable field width with printf?
Use something like
printf("%*d", width, x);
Here is a C program...
#include <stdio.h>
#include <string.h>
#define WIDTH 5
int main ( void )
{
char str1[] = "Good Boy";
char str2[] = "The earth is round";
int width = strlen ( str1 ) + WIDTH;
int prec = strlen ( str2 ) + WIDTH;
printf ( "%*.*s\n", width, prec, str1 );
return 0;
}
216.How can I specify a variable width in a scanf() format string?
You cant!.
An asterisk in a scanf() format string means to suppress assignment. You may be able to
use ANSI stringizing and string concatenation to accomplish about the same thing, or you
can construct the scanf format string at run time.
217.How can I convert numbers to strings (the opposite of atoi)?
Use sprintf()
Note!, since sprintf() is also a variable argument function, it fails badly if passed with
wrong arguments or if some of the arguments are missed causing segmentation faults. So
be very careful when using sprintf() and pass the right number and type of arguments to
it!
218.Why should one use strncpy() and not strcpy()? What are the problems with
strncpy()?

strcpy() is the cause of many bugs. Thats because programmers almost always end up
copying more data into a buffer than it can hold. To prevent this problem, strncpy()
comes in handy as you can specify the exact number of bytes to be copied.
But there are problems with strncpy() also. strncpy() does not always place a '\0'
terminator in the destination string. (Funnily, it pads short strings with multiple \0's, out
to the specified length). We must often append a '\0' to the destination string by hand.
You can get around the problem by using strncat() instead of strncpy(): if the destination
string starts out empty, strncat() does what you probably wanted strncpy() to do. Another
possibility is sprintf(dest, "%.*s", n, source). When arbitrary bytes (as opposed to strings)
are being copied, memcpy() is usually a more appropriate function to use than strncpy().
219.How does the function strtok() work?
strtok() is the only standard function available for "tokenizing" strings.
The strtok() function can be used to parse a string into tokens. The first call to strtok()
should have the string as its first argument. Subsequent calls should have the first
argument set to NULL. Each call returns a pointer to the next token, or NULL when no
more tokens are found. If a token ends with a delimiter, this delimiting character is
overwritten with a "\0" and a pointer to the next character is saved for the next call to
strtok(). The delimiter string delim may be different for each call.
The strtok_r() function works the same as the strtok() function, but instead of using a
static buffer it uses a pointer to a user allocated char* pointer. This pointer must be the
same while parsing the same string.
An example
main()
{
char str[]="This is a test";
char *ptr[10];
char *p;
int i=1;
int j;
p=strtok(str," ");
if(p!=NULL)
{
ptr[0]=p;
while(1)

{
p=strtok(NULL, " ");
if(p==NULL)
break;
else
{
ptr[i] = p;
i++;
}
}
}
for(j=0;j<i;j++)
{
printf("\n%s\n", ptr[i]);
}
}
220.Why do we get the floating point formats not linked error?
Some compilers leave out certain floating point support if it looks like it will not be
needed. In particular, the non-floating-point versions of printf() and scanf() save space by
not including code to handle %e, %f, and %g. It happens that Borland's heuristics for
determining whether the program uses floating point are insufficient, and the programmer
must sometimes insert a dummy call to a floating-point library function (such as sqrt();
any will do) to force loading of floating-point support.
221.Why do some people put void cast before each call to printf()?
printf() returns a value. Some compilers (and specially lint) will warn about return values
not used by the program. An explicit cast to (void) is a way of telling lint that you have
decided to ignore the return value from this specific function call. It's also common to use
void casts on calls to strcpy() and strcat(), since the return value is never used for
anything useful.
222.What is assert() and when would I use it?
An assertion is a macro, defined in <assert.h>, for testing assumptions. An assertion is an

assumption made by the programmer. If its violated, it would be caught by this macro.
For example
int i,j;
for(i=0;i<=10;i++)
{
j += 5;
assert(i<5);
}
Runtime error: Abnormal program termination.
assert failed (i<5), <file name>,<line number>
If anytime during the execution, i gets a value of 0, then the program would break into the
assertion since the assumption that the programmer made was wrong.
223.What do memcpy(), memchr(), memcmp(), memset(), strdup(), strncat(), strcmp
(), strncmp(), strcpy(), strncpy(), strlen(), strchr(), strchr(), strpbrk(), strspn(),
strcspn(), strtok() do?
Here are the prototypes...
void *memchr(const void *s, int c, size_t n);
int memcmp(const void *s1, const void *s2, size_t n);
void *memcpy(void * restrict s1, const void * restrict s2, size_t n);
void *memmove(void *s1, const void *s2, size_t n);
void *memset(void *s, int c, size_t n);
char *strcat(char *restrict s1, const char *restrict s2);
char *strchr(const char *s, int c);
int strcmp(const char *s1, const char *s2);
char *strcpy(char *restrict s1, const char *restrict s2);
size_t strcspn(const char *s1, const char *s2);
char *strdup(const char *s1);
size_t strlen(const char *s);
char *strncat(char *restrict s1, const char *restrict s2, size_t n);

int strncmp(const char *s1, const char *s2, size_t n);

char *strncpy(char *restrict s1, const char *restrict s2, size_t n);
char *strpbrk(const char *s1, const char *s2);
char *strrchr(const char *s, int c);
size_t strspn(const char *s1, const char *s2);
char *strstr(const char *s1, const char *s2);
char *strtok(char *restrict s1, const char *restrict s2);
The memchr() function shall locate the first occurrence of c (converted to an unsigned
char) in the initial n bytes (each interpreted as unsigned char) of the object pointed to by
s. The memchr() function shall return a pointer to the located byte, or a null pointer if the
byte does not occur in the object.
The memcmp() function shall compare the first n bytes (each interpreted as unsigned
char) of the object pointed to by s1 to the first n bytes of the object pointed to by s2. The
sign of a non-zero return value shall be determined by the sign of the difference between
the values of the first pair of bytes (both interpreted as type unsigned char) that differ in
the objects being compared. The memcmp() function shall return an integer greater than,
equal to, or less than 0, if the object pointed to by s1 is greater than, equal to, or less than
the object pointed to by s2, respectively.
The memcpy() function shall copy n bytes from the object pointed to by s2 into the object
pointed to by s1. If copying takes place between objects that overlap, the behavior is
undefined. The memcpy() function returns s1; no value is reserved to indicate an error.
The memmove() function shall copy n bytes from the object pointed to by s2 into the
object pointed to by s1. Copying takes place as if the n bytes from the object pointed to by
s2 are first copied into a temporary of n bytes that does not overlap the objects pointed to
by s1 and s2, and then the n bytes from the temporary array are copied into the object
pointed to by s1. The memmove() function returns s1; no value is reserved to indicate an
error.
The memset() function shall copy c (converted to an unsigned char) into each of the first
n bytes of the object pointed to by s. The memset() function returns s; no value is
reserved to indicate an error.
The strcat() function shall append a copy of the string pointed to by s2 (including the
terminating null byte) to the end of the string pointed to by s1. The initial byte of s2
overwrites the null byte at the end of s1. If copying takes place between objects that
overlap, the behavior is undefined. The strcat() function shall return s1; no return value is
The strchr() function shall locate the first occurrence of c (converted to a char) in the
string pointed to by s. The terminating null byte is considered to be part of the string.
Upon completion, strchr() shall return a pointer to the byte, or a null pointer if the byte

was not found.

The strcmp() function shall compare the string pointed to by s1 to the string pointed to by
s2. The sign of a non-zero return value shall be determined by the sign of the difference
between the values of the first pair of bytes (both interpreted as type unsigned char) that
differ in the strings being compared. Upon completion, strcmp() shall return an integer
greater than, equal to, or less than 0, if the string pointed to by s1 is greater than, equal to,
or less than the string pointed to by s2, respectively.
The strcpy() function shall copy the string pointed to by s2 (including the terminating
null byte) into the array pointed to by s1. If copying takes place between objects that
overlap, the behavior is undefined. The strcpy() function returns s1; no value is reserved
to indicate an error.
The strcspn() function shall compute the length (in bytes) of the maximum initial
segment of the string pointed to by s1 which consists entirely of bytes not from the string
pointed to by s2. The strcspn() function shall return the length of the computed segment
of the string pointed to by s1; no return value is reserved to indicate an error.
The strdup() function shall return a pointer to a new string, which is a duplicate of the
string pointed to by s1, if memory can be successfully allocated for the new string. The
returned pointer can be passed to free(). A null pointer is returned if the new string cannot
be created. The function may set errno to ENOMEM if the allocation failed.
The strlen() function shall compute the number of bytes in the string to which s points,
not including the terminating null byte. The strlen() function shall return the length of s;
no return value shall be reserved to indicate an error.
The strncat() function shall append not more than n bytes (a null byte and bytes that
follow it are not appended) from the array pointed to by s2 to the end of the string pointed
to by s1. The initial byte of s2 overwrites the null byte at the end of s1. A terminating null
byte is always appended to the result. If copying takes place between objects that overlap,
the behavior is undefined. The strncat() function shall return s1; no return value shall be
The strncmp() function shall compare not more than n bytes (bytes that follow a null byte
are not compared) from the array pointed to by s1 to the array pointed to by s2. The sign
of a non-zero return value is determined by the sign of the difference between the values
of the first pair of bytes (both interpreted as type unsigned char) that differ in the strings
being compared. Upon successful completion, strncmp() shall return an integer greater
than, equal to, or less than 0, if the possibly null-terminated array pointed to by s1 is
greater than, equal to, or less than the possibly null-terminated array pointed to by s2
respectively.
The strncpy() function shall copy not more than n bytes (bytes that follow a null byte are
not copied) from the array pointed to by s2 to the array pointed to by s1. If copying takes
place between objects that overlap, the behavior is undefined. If the array pointed to by s2
is a string that is shorter than n bytes, null bytes shall be appended to the copy in the array
pointed to by s1, until n bytes in all are written. The strncpy() function shall return s1; no

return value is reserved to indicate an error.

The strpbrk() function shall locate the first occurrence in the string pointed to by s1 of
any byte from the string pointed to by s2. Upon successful completion, strpbrk() shall
return a pointer to the byte or a null pointer if no byte from s2 occurs in s1.
The strrchr() function shall locate the last occurrence of c (converted to a char) in the
string pointed to by s. The terminating null byte is considered to be part of the string.
Upon successful completion, strrchr() shall return a pointer to the byte or a null pointer if
c does not occur in the string.
The strspn() function shall compute the length (in bytes) of the maximum initial segment
of the string pointed to by s1 which consists entirely of bytes from the string pointed to by
s2. The strspn() function shall return the computed length; no return value is reserved to
indicate an error.
The strstr() function shall locate the first occurrence in the string pointed to by s1 of the
sequence of bytes (excluding the terminating null byte) in the string pointed to by s2.
Upon successful completion, strstr() shall return a pointer to the located string or a null
pointer if the string is not found. If s2 points to a string with zero length, the function
shall return s1.
A sequence of calls to strtok() breaks the string pointed to by s1 into a sequence of
tokens, each of which is delimited by a byte from the string pointed to by s2. The first call
in the sequence has s1 as its first argument, and is followed by calls with a null pointer as
their first argument. The separator string pointed to by s2 may be different from call to
call. The first call in the sequence searches the string pointed to by s1 for the first byte
that is not contained in the current separator string pointed to by s2. If no such byte is
found, then there are no tokens in the string pointed to by s1 and strtok() shall return a
null pointer. If such a byte is found, it is the start of the first token. The strtok() function
then searches from there for a byte that is contained in the current separator string. If no
such byte is found, the current token extends to the end of the string pointed to by s1, and
subsequent searches for a token shall return a null pointer. If such a byte is found, it is
overwritten by a null byte, which terminates the current token. The strtok() function saves
a pointer to the following byte, from which the next search for a token shall start. Each
subsequent call, with a null pointer as the value of the first argument, starts searching
from the saved pointer and behaves as described above. Upon successful completion,
strtok() shall return a pointer to the first byte of a token. Otherwise, if there is no token,
strtok() shall return a null pointer.
224.What does alloca() do?
alloca() allocates memory which is automatically freed when the function which called
alloca() returns. However, note that alloca() is not portable and its usage is not
recommended.
225.Can you compare two strings like string1==string2? Why do we need strcmp()?
Do you think this will work?

if(string1 == string2)
{
}
No!, strings in C cannot be compared like that!.
The == operator will end up comparing two pointers (that is, if they have the same
address). It wont compare the contents of those locations. In C, strings are represented as
arrays of characters, and the language never manipulates (assigns, compares, etc.) arrays
as a whole.
The correct way to compare strings is to use strcmp()
if(strcmp(string1, string2) == 0)
{
}
226.What does printf() return?
Upon a successful return, the printf() function returns the number of characters printed
(not including the trailing '\0' used to end output to strings). If the output was truncated
due to this limit then the return value is the number of characters (not including the
trailing '\0') which would have been written to the final string if enough space had been
available. Thus, a return value of size or more means that the output was truncated. If an
output error is encountered, a negative value is returned.
There is a very funny yet interesting interview question around this....
Look at the code below.
void main()
{
if(X)
{
printf("Hello");
}
else
{
printf(" World");
}

}
What should X be replaced with inorder to get the output as "Hello World"?
And here comes the answer....
#include <stdio.h>
int main()
{
if(!printf("Hello"))
{
printf("Hello");
}
else
{
printf(" World");
}
}
Kind of stupid isn't it? But they do ask these type of questions. Believe me!
227.What do setjmp() and longjump() functions do?
It is not possible to jump from one function to another by means of a goto and a label,
since labels have only function scope. However, the macro setjmp and function longjmp
provide an alternative, known as a non-local goto, or a non-local jump. The header file
<setjmp.h> declares something called a jmp_buf, which is used by the cooperating macro
and function to store the information necessary to make the jump. The declarations are as
follows:
#include <setjmp.h>
int setjmp(jmp_buf env);
void longjmp(jmp_buf env, int val);
The setjmp macro is used to initialise the jmp_buf and returns zero on its initial call.
Then, it returns again, later, with a non-zero value, when the corresponding longjmp call
is made! The non-zero value is whatever value was supplied to the call of longjmp.
This is best explained by way of an example:
#include <stdio.h>
#include <stdlib.h>
#include <setjmp.h>
void func(void);
jmp_buf place;
main()
{
int retval;
/*
* First call returns 0,
* a later longjmp will return non-zero.
*/
if(setjmp(place)) != 0)
{
printf("Returned using longjmp\n");
exit(EXIT_SUCCESS);
}
/*
* This call will never return - it
* 'jumps' back above.
*/
func();
printf("What! func returned!\n");
}
void func(void)
{
/*
* Return to main.
* Looks like a second return from setjmp,
* returning 4!
*/
longjmp(place, 4);
printf("What! longjmp returned!\n");
}
The val argument to longjmp is the value seen in the second and subsequent ?returns?
from setjmp. It should normally be something other than 0; if you attempt to return 0 via
longjmp, it will be changed to 1. It is therefore possible to tell whether the setjmp was
called directly, or whether it was reached by calling longjmp. If there has been no call to
setjmp before calling longjmp, the effect of longjmp is undefined, almost certainly
causing the program to crash. The longjmp function is never expected to return, in the
normal sense, to the instructions immediately following the call. All accessible objects on
?return? from setjmp have the values that they had when longjmp was called, except for
objects of automatic storage class that do not have volatile type; if they have been
changed between the setjmp and longjmp calls, their values are indeterminate.
The longjmp function executes correctly in the contexts of interrupts, signals and any of
their associated functions. If longjmp is invoked from a function called as a result of a
signal arriving while handling another signal, the behaviour is undefined.
It's a serious error to longjmp to a function which is no longer active (i.e. it has already
returned or another longjump call has transferred to a setjmp occurring earlier in a set of
nested calls).
The Standard insists that, apart from appearing as the only expression in an expression
statement, setjmp may only be used as the entire controlling expression in an if, switch,
do, while, or for statement. A slight extension to that rule is that as long as it is the whole
controlling expression (as above) the setjmp call may be the subject of the ! operator, or
may be directly compared with an integral constant expression using one of the relational
or equality operators. No more complex expressions may be employed.
Examples are:
setjmp(place);
/* expression statement */
if(setjmp(place)) ...
/* whole controlling expression */
if(!setjmp(place)) ...
if(setjmp(place) < 4) ...

if(setjmp(place)<;4 && 1!=2) ... /* forbidden */

C Functions - The main function
228.Whats the prototype of main()? Can main() return a structure?
The right declaration of main() is
int main(void)
or
int main(int argc, char *argv[])
or
int main(int argc, char *argv[], char *env[]) //Compiler dependent, non-standard C.
In C, main() cannot return anything other than an int.Something like
void main()
is illegal. There are only three valid return values from main() - 0, EXIT_SUCCESS, and
EXIT_FAILURE, the latter two are defined in <stdlib.h>.
Something like this can cause unpredicted behavior
struct mystruct
{
int value;
struct mystruct *next;
}
main(argc, argv)
{ ... }
Here the missing semicolon after the structure declaration causes main to be misdeclared.
229.Is exit(status) equivalent to returning the same status from main()?
No.
The two forms are not equivalent in a recursive call to main().
230.Can main() be called recursively?
Yes
main()
{
main();

}
But this will go on till a point where you get a
Runtime error : Stack overflow.
231.How to print the arguments recieved by main()?
Here is some code
main(int argc, char*argv[])
{
int i;
for(i=0; i<argc; i++)
{
printf("\n[%s]\n", argv[i]);
}
}
OS Concepts
232.What do the system calls fork(), vfork(), exec(), wait(), waitpid() do? Whats a
Zombie process? Whats the difference between fork() and vfork()?
The system call fork() is used to create new processes. It does not take any arguments and
returns a process ID. The purpose of fork() is to create a new process, which becomes the
child process of the caller (which is called the parent). After a new child process is
created, both processes will execute the next instruction following the fork() system call.
We can distinguish the parent from the child by testing the returned value of fork():
If fork() returns a negative value, the creation of a child process was unsuccessful. A call
to fork() returns a zero to the newly created child process and the same call to fork()
returns a positive value (the process ID of the child process) to the parent. The returned
process ID is of type pid_t defined in sys/types.h. Normally, the process ID is an integer.
Moreover, a process can use function getpid() to retrieve the process ID assigned to this
process. Unix will make an exact copy of the parent's address space and give it to the
child. Therefore, the parent and child processes will have separate address spaces. Both
processes start their execution right after the system call fork(). Since both processes have
identical but separate address spaces, those variables initialized before the fork() call have
the same values in both address spaces. Since every process has its own address space,
any modifications will be independent of the others. In other words, if the parent changes
the value of its variable, the modification will only affect the variable in the parent
process's address space. Other address spaces created by fork() calls will not be affected
even though they have identical variable names.

Trick question!
How many processes are forked by the below program
main()
{
fork();
fork();
}
Answer is 2 raise to n, when n is the number of calls to fork (2 in this case).
Each process has certain information associated with it including:
The UID (numeric user identity)
The GID (numeric group identity)
A process ID number used to identify the process
A parent process ID
The execution status, e.g. active, runnable, waiting for input etc.
Environment variables and values.
The current directory.
Where the process currently resides in memory
The relative process priority see nice(1)
Where it gets standard input from
Where it sends standard output to
Any other files currently open
Certain process resources are unique to the individual process. A few among these are:
* Stack Space: which is where local variables, function calls, etc. are stored.
* Environment Space: which is used for storage of specific environment variables.
* Program Pointer (counter) : PC.
* File Descriptors
* Variables
Undex unix, each sub directory under /proc corresponds to a running process (PID #). A
ps provide detailed information about processes running
A typical output of ps looks as follows:
PID
TTY
STAT
TIME
COMMAND
-------------------------------------------------------------------8811
SW
0:00
(login)
3466
SW
0:00
(bash)
8777
SW
0:00
(startx)
1262
.
p7
.
R
.
0:00
ps
The columns refer to the following:

PID
- The process id's (PID).
TTY
- The terminal the process was started from.
STAT
- The current status of all the processes. Info about the process status
can be broken into more than 1 field. The first of these fields can
contain the following entries:
R
- Runnable.
- Sleeping.
- Un-interuptable sleep.
- Stopped or Traced.
- Zombie Process.
The second field can contain the following entry:

W
- If the process has no residual pages.
And the third field:

N
- If the process has a positive nice value.
TIME - The CPU time used by the process so far.

COMMAND - The actual command.
The init process is the very first process run upon startup. It starts additional processes.

When it runs it reads a file called /etc/inittab which specifies init how to set up the
system, what processes it should start with respect to specific runlevels. One crucial
process which it starts is the getty program. A getty process is usually started for each
terminal upon which a user can log into the system. The getty program produces the
login: prompt on each terminal and then waits for activity. Once a getty process detects
activity (at a user attempts to log in to the system), the getty program passes control over
to the login program.
There are two command to set a process's priority nice and renice.
One can start a process using the system() function call
#include <stdio.h>
#include <stdlib.h>
int main()
{
printf("Running ls.....\n");
system("ls -lrt");
printf("Done.\n");
exit(0);
}
The exec() system call
The exec() functions replace a current process with another created according to the
arguments given.
The syntax of these functions is as follows:
#include <unistd.h>
char *env[];
int execl(const char *path, const char *arg0, ..., (char *)0);
int execv(const char *path, const char *argv[]);
int execlp(const char *path, const char *arg0, ..., (char *)0);
int execvp(const char *path, const char *argv[]);
int execle(const char *path, const char *arg0, ... , (char *)0, const char *env[]);
int execve(const char *path, const char *argv[], const char *env[]);
The program given by the path argument is used as the program to execute in place of
what is currently running. In the case of the execl() the new program is passed arguments
arg0, arg1, arg2,... up to a null pointer. By convention, the first argument supplied (i.e.
arg0) should point to the file name of the file being executed. In the case of the execv()
programs the arguments can be given in the form of a pointer to an array of strings, i.e.
the argv array. The new program starts with the given arguments appearing in the argv
array passed to main. Again, by convention, the first argument listed should point to the
file name of the file being executed. The function name suffixed with a p (execlp() and
execvp())differ in that they will search the PATH environment variable to find the new
program executable file. If the executable is not on the path, and absolute file name,
including directories, will need to be passed to the function as a parameter. The global
variable environ is available to pass a value for the new program environment. In
addition, an additional argument to the exec() functions execle() and execve() is available
for passing an array of strings to be used as the new program environment.
Examples to run the ls command using exec are:
const char *argv[] = ("ls", "-lrt", 0);
const char *env[] = {"PATH=/bin:/usr/bin", "TERM=console", 0};
execl("/bin/ls", "ls", "-lrt", 0);
execv("/bin/ls", argv);
execlp("ls", "ls", "-lrt", 0);
execle("/bin/ls", "ls", "-lrt", 0, env);
execvp("ls", argv);
execve("/bin/ls", argv, env);
A simple call to fork() would be something like this
#include <unistd.h>
#include <stdio.h>
int main()
{
pid_t pid;
pid=fork();
switch(pid)
{

case -1:
exit(1);
// fork() error.
case 0:
// Child process, can call exec here.

break;
default:
// Parent.
break;
}
exit(0);
}
The call wait() can be used to determine when a child process has completed it's job and
finished. We can arrange for the parent process to wait untill the child finishes before
continuing by calling wait(). wait() causes a parent process to pause untill one of the child
processes dies or is stopped. The call returns the PID of the child process for which status
information is available. This will usually be a child process which has terminated. The
status information allows the parent process to determine the exit status of the child
process, the value returned from main or passed to exit. If it is not a null pointer the status
information will be written to the location pointed to by stat_loc. We can interrogate the
status information using macros defined in sys/wait.h.
Macro
Definition
----------------------------------------------------------------------------------WIFEXITED(stat_val);
Nonzero if the child is terminated normally
WEXITSTATUS(stat_val); If WIFEXITED is nonzero, this returns child exit code.

WIFSIGNALLED(stat_val); Nonzero if the child is terminated on an uncaught signal.
WTERMSIG(stat_val);
If WIFSIGNALLED is nonzero, this returns a signal number.
WIFSTOPPED(stat_val); Nonzero if the child stopped on a signal.

WSTOPSIG(stat_val);
If WIFSTOPPED is nonzero, this returns a signal number.
An example code which used wait() is shown below

#include <sys/wait.h>
#include <unistd.h>
int main(void){
pid_t child_pid;
int *status=NULL;
if( fork ( ) )
{
/* wait for child, getting PID */
child_pid=wait(status);
printf("I'm the parent.\n");
printf("My child's PID was: %d\n",child_pid);
}
else
{
printf("I'm the child.\n");
}
return 0;
}
Or a more detailed program
#include <unistd.h>
#include <stdio.h>
int main()
{
pid_t pid;
int exit_code;
pid = fork();
switch(pid)
{
case -1:
exit(1);
case 0:
exit_code = 11; //Set the child exit process
break;
default:
exit_code = 0;
break;
}
if (pid)
{
// This is the parent process
int status;
pid_t child_pid;
child_pid = wait(&status);
printf("Child process finished with PID [%d]\n", child_pid);
if (WIFEXITED(status))
{
printf("Child exited with code [%d]\n", WEXITSTATUS(status));
}
else
{
printf("Child terminated abnormally.\n");
}
}
exit(exit_code);
}

So now, whats a Zombie process?

When using fork() to create child processes it is important to keep track of these
processes. For instance, when a child process terminates, an association with the parent
survives untill the parent either terminates normally or calls wait(). The child process
entry in the process table is not freed up immediately. Although it is no longer active, the
child process is still in the system because it's exit code needs to be stored in the even the
parent process calls wait(). The child process is at that point referred to as a zombie
process. Note, if the parent terminates abnormally then the child process gets the process
with PID 1, (init) as parent. (such a child process is often referred to as an orphan). The
child process is now a zombie. It is no longer running, it's origional parent process is
gone, and it has been inherited by init. It will remain in the process table as a zombie
untill the next time the table is processed. If the process table is long this may take a
while. till init cleans them up. As a general rule, program wisely and try to avoid zombie
processes. When zobbies accumulate they eat up valuable resources.
The waitpid() system call is another call that can be used to wait for child processes. This
system call however can be used to wait for a specific process to terminate.
pit_t waitpid(pid_t pid, int *status, int options);
The pid argument specifies the PID of the particular child process to wait for. If it is a -1
then waitpid() will return information to the child process. Status information will be
written to the location pointed to by status. The options argument enables us to change
the behavior of waitpid(). A very usefull oprion is WNOHANG which prevents the call to
waitpid() from suspending the execution of the caller. We can it to find out whether any
child process has terminated and, if not, to continue.
Synchronous and asynchronous process execution
In some cases, for example if the child process is a server or "daemon" ( a process
expected to run all the time in the background to deliver services such as mail
forwarding) the parent process would not wait for the child to finish. In other cases, e.g.
running an interactive command where it is not good design for the parent's and child's
output to be mixed up into the same output stream, the parent process, e.g. a shell
program, would normally wait for the child to exit before continuing. If you run a shell
command with an ampersand as it's last argument, e.g. sleep 60 & the parent shell doesn't
wait for this child process to finish.
So whats the difference between fork() and vfork()?
The system call vfork(), is a low overhead version of fork(), as fork() involves copying
the entire address space of the process and is therefore quite expensive. The basic
difference between the two is that when a new process is created with vfork(), the parent
process is temporarily suspended, and the child process might borrow the parent's address
space. This strange state of affairs continues until the child process either exits, or calls
execve(), at which point the parent process continues. This means that the child process
of a vfork() must be careful to avoid unexpectedly modifying variables of the parent
process. In particular, the child process must not return from the function containing the
vfork() call, and it must not call exit() (if it needs to exit, it should use _exit(); actually,
this is also true for the child of a normal fork()).
However, since vfork() was created, the implementation of fork() has improved , most
notably with the introduction of `copy-on-write', where the copying of the process address
space is transparently faked by allowing both processes to refer to the same physical
memory until either of them modify it. This largely removes the justification for vfork();
indeed, a large proportion of systems now lack the original functionality of vfork()
completely. For compatibility, though, there may still be a vfork() call present, that
simply calls fork() without attempting to emulate all of the vfork() semantics.
233.How does freopen() work?
234.What are threads? What is a lightweight process? What is a heavyweight
process? How different is a thread from a process?
235.How are signals handled?
This questions will be answered soon :
236.What is a deadlock?
237.What are semaphores?
238.What is meant by context switching in an OS?
239.What is Belady's anomaly?
Usually, on increasing the number of frames allocated to a process' virtual memory, the
process execution is faster, because fewer page faults occur. Sometimes, the reverse
happens, i.e., the execution time increases even when more frames are allocated to the
process. This is known as the Belady's Anomaly. This is true for certain page reference
patterns. This is also called the FIFO anomaly.
240.What is thrashing?
241.What are short-, long- and medium-term scheduling?

Long term scheduler determines which programs are admitted to the system for
processing. It controls the degree of multiprogramming. Once admitted, a job becomes a
process.
Medium term scheduling is part of the swapping function. This relates to processes that
are in a blocked or suspended state. They are swapped out of main-memory until they are
ready to execute. The swapping-in decision is based on memory-management criteria.
Short term scheduler, also know as a dispatcher executes most frequently, and makes
the finest-grained decision of which process should execute next. This scheduler is
invoked whenever an event occurs. It may lead to interruption of one process by
preemption.
242.What are turnaround time and response time?
Turnaround time is the interval between the submission of a job and its completion.
Response time is the interval between submission of a request, and the first response to
that request.
243.What is the Translation Lookaside Buffer (TLB)?
In a cached system, the base addresses of the last few referenced pages is maintained in
registers called the TLB that aids in faster lookup. TLB contains those page-table entries
that have been most recently used. Normally, each virtual memory reference causes 2
physical memory accesses-- one to fetch appropriate page-table entry, and one to fetch the
desired data. Using TLB in-between, this is reduced to just one physical memory access
in cases of TLB-hit.
244.What is cycle stealing?
We encounter cycle stealing in the context of Direct Memory Access (DMA). Either the
DMA controller can use the data bus when the CPU does not need it, or it may force the
CPU to temporarily suspend operation. The latter technique is called cycle stealing. Note
that cycle stealing can be done only at specific break points in an instruction cycle.
245.What is a reentrant program?
Re-entrancy is a useful, memory-saving technique for multiprogrammed timesharing
systems. A Reentrant Procedure is one in which multiple users can share a single copy of
a program during the same period.
Reentrancy has 2 key aspects:
* The program code cannot modify itself.
* The local data for each user process must be stored separately.
Thus, the permanent part is the code, and the temporary part is the pointer back to the
calling program and local variables used by that program. Each execution instance is
called activation. It executes the code in the permanent part, but has its own copy of local
variables/parameters. The temporary part associated with each activation is the activation

record. Generally, the activation record is kept on the stack.

Note: A reentrant procedure can be interrupted and called by an interrupting program,
and still execute correctly on returning to the procedure.
246.When is a system in safe state?
The set of dispatchable processes is in a safe state if there exist at least one temporal
order in which all processes can be run to completion without resulting in a deadlock
247.What is busy waiting?
The repeated execution of a loop of code while waiting for an event to occur is called
busy-waiting. The CPU is not engaged in any real productive activity during this period,
and the process does not progress toward completion
248.What is pages replacement? What are local and global page replacements?
249.What is meant by latency, transfer and seek time with respect to disk I/O?
Seek time is the time required to move the disk arm to the required track. Rotational
delay or latency is the time to move the required sector to the disk head. Sums of seek
time (if any) and the latency is the access time, for accessing a particular track in a
particular sector. Time taken to actually transfer a span of data is transfer time.
250.What are monitors? How are they different from semaphores?
251.In the context of memory management, what are placement and replacement
algorithms?
Placement algorithms determine where in the available main-memory to load the
incoming process. Common methods are first-fit, next-fit, and best-fit.
Replacement algorithms are used when memory is full, and one process (or part of a
process) needs to be swapped out to accommodate the new incoming process. The
replacement algorithm determines which are the partitions (memory portions occupied by
the processes) to be swapped out.
252.What is paging? What are demand- and pre-paging?
253.What is mounting?
Mounting is the mechanism by which two different file systems can be combined
together. This is one of the services provided by the operating system, which allows the
user to work with two different file systems, and some of the secondary devices.

254.What do you mean by dispatch latency?

The time taken by the dispatcher to stop one process and start running another process is
known as the dispatch latency.
255.What is multi-processing? What is multi-tasking? What is multi-threading?
What is multi-programming?
256.What is compaction?
Compaction refers to the mechanism of shuffling the memory portions such that all the
free portions of the memory can be aligned (or merged) together in a single large block.
OS to overcome the problem of fragmentation, either internal or external, performs this
mechanism, frequently. Compaction is possible only if relocation is dynamic and done at
run-time, and if relocation is static and done at assembly or load-time compaction is not
possible.
257.What is memory-mapped I/O? How is it different frim I/O mapped I/O?
Memory-mapped I/O, meaning that the communication between the I/O devices and the
processor is done through physical memory locations in the address space. Each I/O
device will occupy some locations in the I/O address space. I.e., it will respond when
those addresses are placed on the bus. The processor can write those locations to send
commands and information to the I/O device and read those locations to get information
and status from the I/O device. Memory-mapped I/O makes it easy to write device drivers
in a high-level language as long as the high-level language can load and store from
arbitrary addresses.
258.List out some reasons for process termination.
* Normal completion
* Time limit exceeded
* Memory unavailable
* Bounds violation
* Protection error
* Arithmetic error
* Time overrun
* I/O failure
* Invalid instruction
* Privileged instruction

* Data misuse
* Operator or OS intervention
* Parent termination.
General Concepts
259.What is the difference between statically linked libraries and dynamically
linked libraries (dll)?
Static linking means all the referenced code is included in the binary produced. When
linking statically, the linker finds the bits that the program modules need, and physically
copies them into the executable output file that it generates.
Incase of dynamic linking, the binary simply contains a pointer to the needed routine,
which will be loaded by the OS as needed. An important benefit is that libraries can be
updated to fix bugs or security problems and the binaries that use them are immediately
using the fixed code. It also saves disk space, saves memory usage, saves launch time,
improve multi-tasking efficiency. But, deployment of dynamically-linked executable
generally requires coordination across hosts of shared-object libraries, installation
locations, installation environment settings, settings for compile-, link-, and use-time
environment variables Dynamic linking often precludes relocations backward across OS
versions.
On Linux, static libraries have names like libname.a, while shared libraries are called
libname.so.x.y.z where x.y.z is some form of version number. Shared libraries often also
have links pointing to them, which are important, and (on a.out configurations) associated
.sa files. The standard libraries come in both shared and static formats. You can find out
what shared libraries a program requires by using ldd (List Dynamic Dependencies)
Dynamic linking allows an exe or dll to use required information at run time to call a
DLL function. In static linking, the linker gets all the referenced functions from the static
link library and places it with your code into your executable. Using DLLs instead of
static link libraries makes the size of the executable file smaller. Dynamic linking is faster
than static linking.
260.What are the most common causes of bugs in C?
Murphy's law states that "If something can go wrong, it will. So is the case with
programming. Here are a few things than can go wrong when coding in C.
* Typing if(x=0) instead of if(x==0). Use if(0==x) instead.
* Using strcpy() instead of strncpy() and copying more memory than the buffer can
hold.
* Dereferencing null pointers.
* Improper malloc(), free() usage. Assuming malloc'ed memory contains 0, assuming
freed storage persists even after freeing it, freeing something twice, corrupting the malloc
() data structures.
* Uninitialized local variables.
* Integer overflow.
* Mismatch between printf() format and arguments, especially trying to print long ints
using %d. Problems with wrong arguments to sprintf() leading to core dumps.
* Array out of bounds problems, especially of small, temporary buffers.
* Leaving files opened.
* Undefined evaluation order, undefined statements.
* Omitted declaration of external functions, especially those which return something
other than int, or have
"narrow" or variable arguments.
* Floating point problems.
* Missing function prototypes.
Ofcourse, there is the mother of all things that can go wrong - Your logic!.
261.What is hashing?
Hashing is the process of mapping strings to integers, in a relatively small range.
A hash function maps a string (or some other data structure) to a bounded number (called
the hash bucket) which can more easily be used as an index in an array, or for performing
repeated comparisons.
A mapping from a potentially huge set of strings to a small set of integers will not be
unique. Any algorithm using hashing therefore has to deal with the possibility of
collisions.
Here are some common methods used to create hashing functions
Direct method
Subtraction method
Modulo-Division method
Digit-Extraction method
Mid-Square method
Folding method
Pseudo-random method
Here is a simple implementation of a hashing scheme in C

#include <stdio.h>
#define HASHSIZE 197
typedef struct node
{
int value;
struct node *next;
}mynode;
typedef struct hashtable
{
mynode *llist;
}HT;
HT myHashTable[HASHSIZE];
int main()
{
initialize();
add(2);
add(2500);
add(199);
display_hash();
getch();
return(0);
}
int initialize()
{
int i;
for(i=0;i<HASHSIZE;i++)
myHashTable[i].llist=NULL;
return(1);
}
int add(int value)
{
int hashkey;
int i;
mynode *tempnode1, *tempnode2, *tempnode3;
hashkey=value%HASHSIZE;
printf("\nHashkey : [%d]\n", hashkey);
if(myHashTable[hashkey].llist==NULL)
{
//This hash bucket is empty, add the first element!
tempnode1 = malloc(sizeof(mynode));
tempnode1->value=value;
tempnode1->next=NULL;
myHashTable[hashkey].llist=tempnode1;
}
else
{
//This hash bucket already has some items. Add to it at the end.
//Check if this element is already there?
for(tempnode1=myHashTable[hashkey].llist;
tempnode1!=NULL;
tempnode3=tmpnode1,tempnode1=tempnode1->next)
{
if(tempnode1->value==value)
{
printf("\nThis value [%d] already exists in the Hash!\n",
value);
return(1);
}
}
tempnode2 = malloc(sizeof(mynode));
tempnode2->value = value;
tempnode2->next=NULL;
tempnode3->next=tempnode2;
}
return(1);
}
int display_hash()
{
int i;
mynode *tempnode;
for(i=0;i<HASHSIZE;i++)
{
if(myHashTable[i].llist==NULL)
{
printf("\nmyHashTable[%d].llist -> (empty)\n",i);
}
else
{
printf("\nmyHashTable[%d].llist -> ",i);
for(tempnode=myHashTable[i].
llist;tempnode!=NULL;tempnode=tempnode->next)
{
printf("[%d] -> ",tempnode->value);
}
printf("(end)\n");
}
if(i%20==0)
getch();
}
return(0);
}
And here is the output
Hashkey : [2]
Hashkey : [136]
Hashkey : [2]
Hashkey : [2]
This value [2] already exists in the Hash!
myHashTable[0].llist -> (empty)
myHashTable[2].llist -> [2] -> [199] -> (end)


myHashTable[136].llist -> [2500] -> (end)
262.What do you mean by Predefined?
It means already written, compiled and linked together with our program at the time of
linking.
263.What is data structure?
A data structure is a way of organizing data that considers not only the items stored, but
also their relationship to each other. Advance knowledge about the relationship between
data items allows designing of efficient algorithms for the manipulation of data.
264.What are the time complexities of some famous algorithms?
Here you are
Binary search
Finding max & min for a given set of numbers
O(logn)
:
O(3n/2-2)
Merge Sort
O(nlogn)
Insertion Sort
O(n*n)
Quick Sort
O(nlogn)
Selection Sort
O(n*n)
265.What is row major and column major form of storage in matrices?

This is row major representation
If this is your matrix
abcd
efgh
ijkl
Convert into 1D array by collecting elements by rows. Within a row elements are
collected from left to right.
Rows are collected from top to bottom. So, x[i][j] is mapped to position
i*no_of_columns + j.
This is column major representation
On similar lines, in column major representation, we store elements column wise. Here, x
[i][j] is mapped to
position i + j * no_of_rows.
266.Explain the BigOh notation.
Time complexity
The Big Oh for the function f(n) states that
f(n)=O(g(n)); iff there exist positive constants c and d such that: f(n) <=c*g(n) for all
n,n>=d.
Here are some examples...
1
logn
n
->Constant
->Logarithmic
->Linear
nlogn ->nlogn
n*n
->quadratic
n*n*n ->cubic
2^n
->exponential
n!
->Factorial
We also have a few other notations...

Omega notation
f(n)=Omega(g(n)), iff positive constants c and d exist such as f(n)>=cg(n) for all n, n>=d.
Theta notation
f(n)=Theta(g(n)), iff positive constants c1 and c2 and an d exists such that c1g(n)<=f(n)
<=c2g(n) for all n, n>=d.
Little Oh(o)
f(n)=og(n), iff f(n)=Og(n) and f(n)!=Omega(g(n)).
Then there is also something called Space complexity...
Fixed part : This is the independent of the instance characteristics. This typically
includes the instruction space (i.e. space for the code), space for simple variables and
fixed-size component variables, space for constants, and so on.
Variable part: A variable part that consists of the space needed by the component
variables whose size depends on the particular problem instance being solved,
dynamically allocated space (to the extent that this space depends on the instance
characteristics); and the recursion stack space (in so far as this space depends on the
instance characteristics).
A complete description of these concepts is out of the scope of this website. There are
plenty of books and millions of pages on the Internet. Help yourself!
267.Give the most important types of algorithms.
There are five important basic designs for algorithms.
They are:
* Divide and conquer : For a function to compute on n inputs the divide and conquer
strategy suggests the inputs into a k distinct subsets, 1<k<=n, yielding k sub-problems.
These sub-problems must be solved and then a method must be found to combine the
sub-solutions into a solution of the whole. An example for this approach is "binary
search" algorithm. The time complexity of binary search algorithm is O(log n).
* The greedy method : The greedy method suggests that one can devise an algorithm
that works in stages, considering one input at a time. At each stage, a decision is made
regarding whether a particular input is an optimal solution. An example for solution using
greedy method is "knapsack problem". Greedy algorithms attempt not only to find a
solution, but to find the ideal solution to any given problem.
* Dynamic programming : Dynamic Programming is an algorithm design method

that can be used when the solution to a problem can be viewed as the result of a sequence
of decisions. An example for algorithm using dynamic programming is "multistage
graphs". This class remembers older results and attempts to use this to speed the process
of finding new results.
* Back-tracking : Here if we reach a dead-end, we use the stack to pop-off the dead
end and try something else we had not tried before. The famous 8-queens problem uses
back tracking. Backtracking algorithms test for a solution, if one is found the algorithm
has solved, if not it recurs once and tests again, continuing until a solution is found.
* Branch and bound : Branch and bound algorithms form a tree of subproblems to the
primary problem, following each branch until it is either solved or lumped in with another
branch.
268.What is marshalling and demarshalling?
When objects in memory are to be passed across a network to another host or persisted to
storage, their in-memory representation must be converted to a suitable out-of-memory
format. This process is called marshalling, and converting back to an in memory
representation is called demarshalling. During marshalling, the objects must be
respresented with enough information that the destination host can understand the type of
object being created. The objects? state data must be converted to the appropriate format.
Complex object trees that refer to each other via object references (or pointers) need to
refer to each other via some form of ID that is independent of any memory model. During
demarshalling, the destination host must reverse all that and must also validate that the
objects it receives are consistent with the expected object type (i.e. it validate that it
doesn?t get a string where it expects a number).
269.What is the difference between the stack and the heap? Where are the different
types of variables of a program stored in memory?
When a program is loaded into memory, it is organized into three areas of memory, called
segments: the text segment, stack segment, and the heap segment. The text segment
(sometimes also called the code segment) is where the compiled code of the program
itself resides. This is the machine language representation of the program steps to be
carried out, including all functions making up the program, both user defined and system.
The remaining two areas of system memory is where storage may be allocated by the
compiler for data storage. The stack is where memory is allocated for automatic variables
within functions. A stack is a Last In First Out (LIFO) storage device where new storage
is allocated and deallocated at only one "end", called the Top of the stack. When a
program begins executing in the function main(), space is allocated on the stack for all
variables declared within main(). If main() calls a function, func(), additional storage is
allocated for the variables in func() at the top of the stack. Notice that the parameters
passed by main() to func() are also stored on the stack. If func() were to call any
additional functions, storage would be allocated at the new Top of stack. When func()
returns, storage for its local variables is deallocated, and the Top of the stack returns to its
old position. If main() were to call another function, storage would be allocated for that
function at the Top. The memory allocated in the stack area is used and reused during
program execution. It should be clear that memory allocated in this area will contain
garbage values left over from previous usage.
The heap segment provides more stable storage of data for a program; memory allocated
in the heap remains in existence for the duration of a program. Therefore, global variables
(storage class external), and static variables are allocated on the heap. The memory
allocated in the heap area, if initialized to zero at program start, remains zero until the
program makes use of it. Thus, the heap area need not contain garbage.
270.Describe the memory map of a C program.
This is a quite popular question. But I have never understood what exactly is the purpose
of asking this question. The memory map of a C program depends heavily on the
compiler used.
Nevertheless, here is a simple explanation..
During the execution of a C program, the program is loaded into main memory. This area
is called permanent storage area. The memory for Global variables and static variables is
also allocated in the permanent storage area. All the automatic variables are stored in
another area called the stack. The free memory area available between these two is called
the heap. This is the memory region available for dynamic memory allocation during the
execution of a program.
+-----------------------+
|
| Automatic Variables | --> Stack

|
+-----------------------+
|
Free Memory
| --> Heap
+-----------------------+
|
| Global Variables
|
| |
| --+--> Permanent storage area
+-----------------------+ |
|
|
| |
Program (Text)
| --+
+-----------------------+
271.What is infix, prefix, postfix? How can you convert from one representation to
another? How do you evaluate these expressions?
There are three different ways in which an expression like a+b can be represented.
Prefix (Polish)
+ab
Postfix (Suffix or reverse polish)
ab+
Infix
a+b
Note than an infix expression can have parathesis, but postfix and prefix expressions are
paranthesis free expressions.
Conversion from infix to postfix
Suppose this is the infix expresssion
((A + (B - C) * D) ^ E + F)
To convert it to postfix, we add an extra special value ] at the end of the infix string and
push [ onto the stack.
((A + (B - C) * D) ^ E + F)]
--------->
We move from left to right in the infix expression. We keep on pushing elements onto the
stack till we reach a operand. Once we reach an operand, we add it to the output. If we
reach a ) symbol, we pop elements off the stack till we reach a corresponding { symbol. If
we reach an operator, we pop off any operators on the stack which are of higher
precedence than this one and push this operator onto the stack.
As an example
Expresssion
Stack
Output
---------------------------------------------------------------------------((A + (B - C) * D) ^ E + F)]
^
((A + (B - C) * D) ^ E + F)]
[((
^
((A + (B - C) * D) ^ E + F)]
[((+
[((+(-
ABC
^
((A + (B - C) * D) ^ E + F)]
^
((A + (B - C) * D) ^ E + F)]
[(
ABC-D*+
[(
ABC-D*+E^F+
ABC-D*+E^F+
^
((A + (B - C) * D) ^ E + F)]
^
((A + (B - C) * D) ^ E + F)]
^
Is there a way to find out if the converted postfix expression is valid or not
Yes. We need to associate a rank for each symbol of the expression. The rank of an
operator is -1 and the rank of an operand is +1. The total rank of an expression can be
determined as follows:
- If an operand is placed in the post fix expression, increment the rank by 1.
- If an operator is placed in the post fix expression, decrement the rank by 1.
At any point of time, while converting an infix expression to a postfix expression, the
rank of the expression can be greater than or equal to one. If the rank is anytime less than
one, the expression is invalid. Once the entire expression is converted, the rank must be
equal to 1. Else the expression is invalid.
Conversion from infix to prefix
This is very similar to the method mentioned above, except the fact that we add the
special value [ at the start of the expression and ] to the stack and we move through the
infix expression from right to left. Also at the end, reverse the output expression got to
get the prefix expression.
Evaluation of a postfix expression
Here is the pseudocode. As we scan from left to right

* If we encounter an operand, push it onto the stack.
* If we encounter an operator, pop 2 operand from the stack. The first one popped is
called operand2 and the second one is called operand1.
* Perform Result=operand1 operator operand2.
* Push the result onto the stack.
* Repeat the above steps till the end of the input.
Convert from postfix expression to infix
This is the same as postfix evaluation, the only difference being that we wont evaluate the
expression, but just present the answer. The scanning is done from left to right.
ABC-D*+
A(B-C)D*+
A((B-C)*D)+
A+((B-C)*D)
Convert from postfix expression to infix
The scanning is done from right to left and is similar to what we did above.
+A*-BCD
Reverse it
DCB-*A+
D(B-C)*A+
((B-C)*D)A+
A+((B-C)*D)
272.How can we detect and prevent integer overflow and underflow?
Compiling and Linking
274.How to list all the predefined identifiers?
gcc provides a -dM option which works with -E.
275.How the compiler make difference between C and C++?

Most compilers recognized the file type by looking at the file extension.
You might also be able to force the compiler to ignore the file type by supplying compiler
switch. In MS VC++ 6, for example, the MSCRT defines a macro, __cplusplus. If you
undefine that macro, then the compiler will treat your code as C code. You don't define
the __cplusplus macro. It is defined by the compiler when compiling a C++ source. In
MSVC6 there's a switch for the compiler, /Tc, that forces a C compilation instead of C++.
276.What are the general steps in compilation?
1. Lexical analysis.
2. Syntactic analysis.
3. Sematic analysis.
4. Pre-optimization of internal representation.
5. Code generation.
6. Post optimization.
277.What are the different types of linkages?
Linkage is used to determine what makes the same name declared in different scopes
refer to the same thing. An object only ever has one name, but in many cases we would
like to be able to refer to the same object from different scopes. A typical example is the
wish to be able to call printf() from several different places in a program, even if those
places are not all in the same source file.
The Standard warns that declarations which refer to the same thing must all have
compatible type, or the behaviour of the program will be undefined. Except for the use of
the storage class specifier, the declarations must be identical.
The three different types of linkage are:
* external linkage
* internal linkage
* no linkage
In an entire program, built up perhaps from a number of source files and libraries, if a
name has external linkage, then every instance of a that name refers to the same object
throughout the program. For something which has internal linkage, it is only within a
given source code file that instances of the same name will refer to the same thing.
Finally, names with no linkage refer to separate things.
Linkage and definitions
Every data object or function that is actually used in a program (except as the operand of
a sizeof operator) must have one and only one corresponding definition. This "exactly
one" rule means that for objects with external linkage there must be exactly one definition
in the whole program; for things with internal linkage (confined to one source code file)
there must be exactly one definition in the file where it is declared; for things with no
linkage, whose declaration is always a definition, there is exactly one definition as well.
The three types of accessibility that you will want of data objects or functions are:
* Throughout the entire program,
* Restricted to one source file,
* Restricted to one function (or perhaps a single compound statement).
For the three cases above, you will want external linkage, internal linkage, and no linkage
respectively. The external linkage declarations would be prefixed with extern, the internal
linkage declarations with static.
#include <stdio.h>
// External linkage.
extern int var1;
// Definitions with external linkage.
extern int var2 = 0;
// Internal linkage:
static int var3;
// Function with external linkage
void f1(int a){}
// Function can only be invoked by name from within this file.
static int f2(int a1, int a2)
{
return(a1 * a2);
}
278.What do you mean by scope and duration?
The duration of an object describes whether its storage is allocated once only, at program
start-up, or is more transient in its nature, being allocated and freed as necessary.
There are only two types of duration of objects: static duration and automatic duration.
Static duration means that the object has its storage allocated permanently, automatic
means that the storage is allocated and freed as necessary.
It's easy to tell which is which: you only get automatic duration if
* The declaration is inside a function.
* And the declaration does not contain the static or extern keywords.
* And the declaration is not the declaration of a function.
The scope of the names of objects defines when and where a given name has a particular
meaning. The different types of scope are the following:
* function scope
* file scope
* block scope
* function prototype scope
The easiest is function scope. This only applies to labels, whose names are visible
throughout the function where they are declared, irrespective of the block structure. No
two labels in the same function may have the same name, but because the name only has
function scope, the same name can be used for labels in every function. Labels are not
objects?they have no storage associated with them and the concepts of linkage and
duration have no meaning for them. Any name declared outside a function has file scope,
which means that the name is usable at any point from the declaration on to the end of the
source code file containing the declaration. Of course it is possible for these names to be
temporarily hidden by declarations within compound statements. As we know, function
definitions must be outside other functions, so the name introduced by any function
definition will always have file scope. A name declared inside a compound statement, or
as a formal parameter to a function, has block scope and is usable up to the end of the
associated } which closes the compound statement. Any declaration of a name within a
compound statement hides any outer declaration of the same name until the end of the
compound statement. A special and rather trivial example of scope is function prototype
scope where a declaration of a name extends only to the end of the function prototype.
The scope of a name is completely independent of any storage class specifier that may be
used in its declaration.
279.
280.

Technical Q & A

Uploaded by

Copyright:

Available Formats

Technical Q & A

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Technical Q & A

Uploaded by

Copyright:

Available Formats

*

o Write a C program to reverse a string Updated!

numbers? Can we use expressions?

Edited by Foxit Reader

Write a C program to do the same.

for(temp=head; temp!=(mynode *)0; temp=temp->next)

// Reverse the linked list recursively

Edited by Foxit Reader

Edited by Foxit Reader

Edited by Foxit Reader

mynode *tempnode1, *tempnode2, *tempnode3;

Edited by Foxit Reader

tempnode1 = mergesort(tempnode1, size1);

Edited by Foxit Reader

4.How to declare a structure of a linked list?

Edited by Foxit Reader

Edited by Foxit Reader

printf( " %d", *( int * ) n );

Edited by Foxit Reader

Edited by Foxit Reader

int compare_linked_lists( struct node *q, struct node *r )

Edited by Foxit Reader

Quite a few people get this wrong.

ptr2 = ptr2 -> next ;

It is good programming practice to set the pointer value to NULL immediately

Edited by Foxit Reader

surely points to a pointer corruption.

Edited by Foxit Reader

char *p3, *p4;

void *mymemmove(void *to, const void *from, size_t size)

From (after) = [ABABCDEFGHI]

string being searched */, int n /* length of this string */)

int hx, hy, i, j;

Edited by Foxit Reader

Edited by Foxit Reader

Edited by Foxit Reader

Edited by Foxit Reader

char *mystrcpy( char *dst, const char *src )

Edited by Foxit Reader

/* standard I/O routines. */

#define MAX_LINE_LEN 1000 /* maximum line length supported. */

Edited by Foxit Reader

24.Write C programs to implement the toupper() and the isupper() functions

Here is some C code which implements the strlen() function....

Method1 (The XOR trick)

Edited by Foxit Reader

Edited by Foxit Reader

Edited by Foxit Reader

// Here I am calculating strlen(str) everytime.

*(buff + start) = *(buff + end);

return new String(reversed);

if( *x == '\0' || *x == ' ' )

| I | -> | <spaces> | -> | am | -> | <spaces> | -> | a | -> | <spaces> | --+

+------+ +----------+ +-----+ +------+

+---> | good | -> | <spaces> | -> | boy | -> | NULL |

sum = sum + X[i]

maxToLeft = ( maxToLeft > sum ) ? maxToLeft : sum ;

Edited by Foxit Reader

Here is some code to determine what is the type of your machine

Edited by Foxit Reader

mynode tempnode1, tempnode2, *tempnode3;

printf( " %d", ( int ) n );

int compare_linked_lists( struct node q, struct node r )

char p3, p4;

void mymemmove(void to, const void *from, size_t size)

string being searched /, int n / length of this string */)

char mystrcpy( char dst, const char *src )

(buff + start) = (buff + end);

if( x == '\0' || x == ' ' )

string = (char ) malloc ( 100 * sizeof ( char ) ) ;

static char stamp[] = "***\nmodule " FILE "\ncompiled " TIMESTAMP

if (strcmp((char ) parsed_argument_without_no, (char ) OPTION1) == 0)