SealGuideMetric PDF

CHESTERTON
Mechanical Seal Guide
Metric
Comprehensive reference
for selecting Chesterton
mechanical seals
ISO 9001
CERTIFIED
Chesterton Mechanical Seal Guide

The Chesterton Mechanical Seal Guide is a reference
source to help users identify standard mechanical seal
recommendations. This comprehensive guide includes
product overviews, technical data, seal recommendations
by fluid, environmental control plans and a technical
reference section.
At ambient conditions, these materials are equally

suitable from a compatibility standpoint; but may not be
the optimum materials as recommended by Chesterton.
Services that fall outside these parameters can be
addressed by using the seal selection checklist below
and contacting Chesterton Application Engineering.
Section 1, Product Overviews, covers the key features

of our core product line of mechanical seals and
seal support systems and includes cut-away and
cross-sectional views of each.
Section 4, Environmental Control Plans,

outlines the general sealing plan recommendations
and configurations. Properly choosing a seal plan
can be accomplished by using the general seal plan
recommendations, and can also be supplemented
through user knowledge, customer requirements and
the assistance of Chesterton Application Engineering.
Section 2, Mechanical Seal Technical Data,

includes seal and installation dimensional data,
drawings and standard specifications,
including materials and operating limits.
Section 3, Seal Recommendations by Fluid,
lists over 1000 commercial fluids with respective seal
recommendations. Seal recommendations only apply
to the published fluid concentration and temperature.
Due to variances in commercial and technical
requirements, alternate compatible seal materials
are listed and can be substituted at the users discretion.
Section 5,Technical Reference, contains useful

technical formulas and conversion tables.
We trust youll find this guide to be a useful
reference tool in assisting you to apply Chesterton
mechanical seal technology in the field.
Before applying a Chesterton mechanical seal

always check the following:
Seal Selection Checklist
Mechanical
Pump Condition
Pump Design
Pump Dimensions
Fluids
Concentration
Carrier Solvent
Cleaning Fluids
Fluid Additives
% Solids
Parameters
Pressures
Temperatures
Shaft Speed
System
Batch Operation
Continuous
Environmental
Controls
Disclaimer
Caution
Please Read Carefully
This Guide is intended for use solely by fully trained CHESTERTON Specialists who are also experienced and familiar with the wide range of operating conditions and the wide variety of
applications into which fluid sealing devices are or may be placed.
This seal guide is not an operations or safety manual. Users should rely on their own training and experience in taking all precautions necessary when working around, or making
decisions about the materials, chemicals, temperature and pressures referred to herein. Hazard Information reflects only the classifications published by European Council Directive 96/54/EC and the
International Agency for Research on Cancer (IARC), Groups 1, 2A, or 2B. This information is provided only as one reference point and is not intended to be an exhaustive listing of all potential hazards.
Likewise, the fact that there is no European Council Directive 96/54/EC or the International Agency of Research on Cancer (IARC), Groups 1, 2A, or 2B hazard reference for some materials should not
be taken to mean that there are no hazards whatsoever associated with the material. As above, for operations and safety purposes, you should rely on your own training, experience or careful
further inquiry.
THE INFORMATION FURNISHED IN THIS GUIDE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT ANY WARRANTIES OR PRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE (RESPECTING EITHER THE INFORMATION OR ANY PRODUCTS LISTED IN ASSOCIATION WITH THE
INFORMATION). CHESTERTON CANNOT AND DOES NOT WARRANT THE ACCURACY OR COMPELETNESS OF THE INFORMATION. CHESTERTON ASSUMES NO LIABILITY TO YOU OR ANYONE ELSE
FOR ANY DECISION OR ACTION TAKEN BY YOU IN RELIANCE UPON THE INFORMATION IN THIS GUIDE.

Table of Contents

Mechanical
Section 1
Seal Division
Product Overview
180 and 280 Heavy Duty Cartridge Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 2
UV Cartridge Seal and ZF Paperstock Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 3
155 and 255 Cartridge Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 4
442 Split Seal and 4400 Gas Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 5
491 and 891 Rotary Component Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 6
Stationaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 7
442M and 280M Mixer Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 8
186HT Bellows Cartridge Seal and 886HT Rotary Bellows Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 9
Single and DualFlow Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 10
Barrier Fluid Tanks and SpiralTrac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 11
Section 2
Mechanical Seal Technical Data
180 Extra Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 2
180 Small and Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3
280 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 4
UV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 6
ZF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 7
155 Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 8
155 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 9
255 Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 10
255 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 11
442 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 12
4400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 14
491 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 15
891 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 16
Stationaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 17
442M Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 18
442M Extra Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 19
280M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 20
280M Jumbo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 21
186HT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 22
886HT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 23
Section 3
Seal Recommendations by Fluid
Seal Recommendation Key and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 2
Seal Recommendations and Fluid Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 3
Section 4
Environmental Control Plans
Plan 2 Cooling Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 2
Plan 11 Discharge Recirculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 2
Plan 13 Suction Recirculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 3
Plan 21 Cooled Discharge Recirculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 3
Plan 23 Cooling with Pumping Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 4
Plan 32 Flush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 4
Plan 52 Circulation with External Buffer Fluid Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 5
Plan 53 Circulation with Pressurized External Barrier Fluid Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 5
Plan 53 Modified Circulation with Pressurized External Barrier Fluid Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 6
Plan 54 with DualFlow Circulation with Pressurized External Barrier Fluid Source and DualFlow . . . . . . .4 - 6
Plan 54 Circulation with Pressurized External Barrier Fluid Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 7
Plan 62 Quench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 7
Section 5
Technical Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 2
Section 1
Product Overview

Product Overview
180 High Reliability

Single Cartridge Seal
280 Heavy Duty

Dual Cartridge Seal
A heavy duty single seal for maximum

reliability. Excels in tough applications.
A heavy duty dual seal for greatest reliability

in difficult applications. Ideal for heavy slurries
and viscous fluids.
Patented Self-Centering Lock Ring

Multi-port injection
Narrow rotating seal face
Full-featured, slotted gland with floating
throttle bushing
Rugged, high torque stationary seal
Monolithic, low emissions seal faces
Micropolished, responsive seal ring
Non-fretting pump/seal parts
Cushioned high strength drives

Rugged, high torque monolithic seal faces
Geometric double balance
with direct centering
Unified Seal Face Alignment
Internal pumping system
Floating flow channel
Micropolished, responsive seal rings
* Unified Seal Face Alignment and Self-Centering Lock Ring
are trademarks of A.W. Chesterton Co.
1-2

Product Overview
UV Universal Value
Single Cartridge Seal
ZF Zero Flush
Paperstock Seal
Migration of advanced Chesterton technology

into a new performance/value leader.
Designed to survive in the harsh, but real-life

environment of paper stock pumps.
Superior state-of-the-art
cartridge single seal performance
Compact size plus Adjustable Gland for
universal fit within the range of process pumps
Easy 2-step installation features auto-centering
Eliminates damaging effects of fretting or
miscentering common with low-end seals
Hydraulically balanced design with monolithic
seal faces for lasting reliable performance
The first after-market quality seal
affordable for use in new pump service
Waterless performance,
no need for external flush or quench
Fits directly on common Sulzer
and ABS/Scanpumps
Micropolished o-ring surface
for enhanced responsiveness
Advanced SSCG seal face material
provides lowest heat generation possible
Self-cleaning action eliminates o-ring hang-up
Easy and quick to repair on-site
* Adjustable Gland is a trademark of A.W. Chesterton Co.
1-3

Product Overview
155 Single Cartridge Seal
255 Dual Cartridge Seal
A versatile single seal for use

in a wide variety of applications.
A general duty, dual seal for plant wide use.
Stationary seal
Self-Centering Lock Ring
Adjustable gland tabs
Monolithic seal faces
Low heat generation
360 degree flush port orientation
Low emissions design

Self-Centering Lock Ring
Springs isolated from fluids
Large barrier fluid ports
Monolithic seal faces

are trademarks of A. W. Chesterton Co.
1-4

Product Overview
442 Split Mechanical Seal
4400 Gas Seal
A high performance split seal for universal

service. The 442 Split seal is the worlds
most popular split seal.
A compact cartridge design that uses

an in-gland control system (IGCS)
to allow for easy, trouble free installation
and maximum in-service reliability.
Ball and socket O-rings

Patented, full vacuum capability
Patented, high pressure, positive drive faces
Non-fretting pump and seal parts
Patented, automatic centering
Compact design
Stationary, non-clog finger springs
Captive fasteners
Adjustable gland tabs
Fluid sealing on the O.D. of the seal faces

Fits any cross-section stuffing box
No expensive external controls required
Maintains nitrogen pressure regulation
with respect to process pressure. A nitrogen
pressure of 1,4 bar g greater than process
pressure is always maintained.
Easily transitions to a liquid lubricated seal
and back to a non-contacting gas seal
during nitrogen supply loss
Hydrodynamic and unique hydrostatic lift-off
makes starts and stops easy
* IGCS is a trademark of A.W.Chesterton Co.
1-5

Product Overview
491 DIN
Rotary Component Seal
891
Rotary Component Seal
High quality in an economical seal.

Fits DIN24960 short seal chambers (L1K).
Fits most DIN, ISO and ANSI standard pumps

for plantwide general service sealing.
Operates at pressures up to 42 bar g

Provides plant-wide, reliable general
purpose sealing performance
Springs out of the fluid, non-clogging
Hydraulically balanced for low heat
generation and long life
Monolithic seal faces that stay mated under
fluctuating pressures and temperatures
Upgrade from single spring component seals

Springs out of the fluid, non-clogging
Hydraulically balanced for low heat
generation and long life
Monolithic seal faces that stay mated under
fluctuating pressures and temperatures
Low emissions seal faces
1-6

Product Overview
VDMA Stationary
Conforms to DIN24960 and
EN12756 dimensions for seal cavities
Large section o-ring provides
self aligning features
Single torque transmission
L-Shape Stationary
General purpose stationary seal
Lapped both sides to fit most
stuffing box arrangements
Compression fitted for high torque capability
due to absence of drive pins
SAS
Self Aligning Stationary Unit
Self aligning design compensates for
installation misalignments
Compact design, fits 478 gland
1-7

Product Overview
442M Split Mixer Seal
280M Mixer Seal
With its enhanced radial and axial motion

capability, the 442M is an ideal choice for
mixers and agitators. The 442M is a proven,
versatile performer.
The 280M spring load is not affected

by axial shaft movement, making it an ideal
choice on equipment with shaft movement.
Ball and socket O-rings

Patented, full vacuum capability
Patented, high pressure, positive drive faces
Non-fretting pump and seal parts
Patented, automatic centering
Compact design
Non-clog finger springs
Captive fasteners
Narrow rotating seal faces

Cushioned high strength drives
Rugged, high torque monolithic seal faces
with direct centering
Micropolished, responsive seal rings
are trademarks of A.W. Chesterton Co.
1-8

Product Overview
186HT High Temperature

Bellows Cartridge Seal
886HT High Temperature

Rotary Bellows Seal
Cartridge seal designed to fit standard

pump bores as well as API pumps.
Fits most DIN, ISO, ANSI and API pumps.
Proven performance
in high temperature services
Full featured gland with flush,
quench/vent and drain
High temperature grafoil secondary seals
Advanced bellows design
for maximum cycle life
Blister-resistant antimony carbon
Heat-treated AM350 bellows core
Easily upgrades OEM component seals

Proven performance
in high temperature services
High temperature grafoil secondary seals
Advanced bellows design
for maximum cycle life
Blister-resistant antimony carbon
Heat-treated AM350 bellows core
1-9

Product Overview
Single Flow
Flush/Quench Fluid Regulator
DualFlow
Barrier Fluid Regulator
Reduce seal water consumption

accurately and reliably.
The Chesterton DualFlow Meter regulates

both pressure and flow independently
on dual seals. Reliably sets, maintains and
monitors flow and pressure for forced
circulated dual seal systems.
Conical, self-cleaning indicators

Chemically resistant, advanced polymer,
Grilamid 2000LX* front panel
Laser cut, non-clog regulator
Standard Single Flow
Flow Rates 0,5 2,0 liters/min
Pressures to 10 bar g
Temperatures to 80C
Large Single Flow
Temperature to 80C
* Registered Trademark of Dynamit Nobel.
1 - 10
Accurate, oil-filled pressure gauge

Measures flows with +/-10% full scale
Dual conical, self-cleaning indicators
Available in small and large size
configurations
Temperatures to 80C
Small DualFlow
Standard DualFlow
Large DualFlow
Flow rates 2,0 10,0 liters/min
Extra Large DualFlow
Flow rates 5,0 30,0 liters/min

Product Overview
Barrier Fluid Tanks
SpiralTrac*
Chesterton barrier fluid tanks provide

maximum security and reliability
Continuously removes particulate from the

stuffing box enhancing seal reliability.
Complies with European Pressure

Equipment Directive, Category 1
Independently certified ASME
Code Section VIII Div. 1
304L Construction to prevent scale
Large capacity 19,0 liter tank
24 bar g from -30C to 175C
Weld pad level gauge and
heat exchanger optional
Low level alarm connection
High pressure elliptical heads
Cross-flow barrier fluid connections
Available in split and non-split construction

Wide variety of configurations available
for various stuffing box geometries
and particulates
Non-contacting, non-wearing
patented device
Vents air from the stuffing box prior
to start-up
* Trademark of EnviroSeal Engineering Products Ltd.
1 - 11
Section 2
Seal Technical Data

Seal Technical Data
180 EXTRA SMALL Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
D
MAX
E
MIN
F
MAX
10 mm
G MIN
12 mm
16 mm
J
MAX
25
104
41
51
39
54
73
28
104
44
52
42
54
73
11
41
120
126
127
033
11
41
122
128
129
30
104
46
57
44
54
78
034
11
41
123
129
130
32
104
48
58
46
54
035
80
11
41
124
130
131
33
113
49
59
47
035
54
81
83
14
41
125
131
132
35
111
51
59
49
036
54
80
82*
14
41
126
132
133
38
114
54
61
036
52
54
85
87
14
41
128
134
135
037
40
127
56
42
127
58
68
54
54
90
92
13
41
129
135
136
038
66
56
54
88
90
13
41
130
136
137
43
127
59
039
69
57
54
91
93
13
41
131
137
138
039
*Requires SHCS or D shaped washers.
B MAX
E
MIN
F
J
C
D
A
V W
G MIN
H
Y
180 KEY
180 SPECIFICATIONS
STANDARD MATERIALS
Rotary Faces:
Carbon, Sintered Silicon Carbide,
Tungsten Carbide
Stationary Faces:
Sintered Silicon Carbide, Tungsten Carbide
Elastomers:
Fluorocarbon, EP, AFLAS standard
Metal Components:
316SS major components
Tungsten Carbide anti-rotation pins
Springs:
Alloy C-276
Consult factory for additional materials available
OPERATING LIMITS
Speed Limits:
25 m/s maximum
Temperature Limits:
To 150C Ethylene Propylene
To 205C Fluorocarbon, AFLAS
To 260C Perfluoroelastomer
Pressure Limits:
Extra Small Sizes
25 mm through 43 mm 40 bar g*
Consult Chesterton Mechanical Seal
Engineering for pressures above 26 bar g
Small Sizes
45 mm through 60 mm 40 bar g*
Consult Chesterton Mechanical Seal
Engineering for services beyond
these limits
Large Sizes
65 mm through 120 mm
40 bar g maximum**
Asahi Glass Company Ltd., registered trademark
* Use 4 gland bolts above 26 bar g
** 4 gland bolts and environmental controls
recommended over 19,5 bar g
2-2
A
B
C
D
E
F
G
H
J
V
W
X
Y
Shaft Size
Maximum Gland Diameter
Stuffing Box Inside Diameter
Inboard Seal Diameter
Required Stuffing Box Depth
Outboard Seal Length
Minimum Bolt Circle by Bolt Size
Slot Width
Gland Width
Shaft O-Ring
Rotary Seal O-Ring
Stationary Seal O-Ring
Adapter O-Ring

Seal Technical Data
180 SMALL and LARGE Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
D
MAX
E
MIN
F
MAX
10 mm
G MIN
12 mm
45
139
64
73
63
18
49
95
97
13
43
133
139
140
150
48
139
67
73
66
18
49
95*
97*
13
43
134
141
142
151
50
139
69
78
68
18
49
100
102
13
43
136
142
143
151
53
152
73
87
72
18
49
109
111
115
17
43
137
144
145
153
55
152
74
83
73
18
49
105
107
111
17
43
139
145
146
152
58
152
80
91
78
18
49
114
116
120
17
43
140
148
149
153
60
152
80
91
78
18
49
114
116
120
17
43
142
148
149
153
12 mm
16 mm
20 mm
242
16 mm
J
MAX
65
164
92
103
90
22
64
127
131
17
45
231
235
236
70
196
96
111
93
22
64
137
141
17
45
232
236
237
245
75
202
102
119
100
22
64
143
147
17
45
234
238
239
247
80
203
106
122
103
22
64
150
154
17
45
236
239
240
248
85
211
111
128
109
22
64
152
156
161
20
45
237
241
242
250
90
214
116
132
113
22
64
160
164
168
20
45
239
242
243
251
95
221
121
137
119
22
64
161
165
170
20
45
240
244
245
253
100
228
127
144
125
22
64
168
172
177
20
45
242
246
247
255
110
237
137
154
134
22
64
178
182
186
20
45
245
249
250
258
120
266
146
164
144
22
64
187
191
195
20
45
248
252
253
259
*Requires SHCS or D shaped washers.
E
MIN
B MAX
F
J
C
D
A
G MIN
V W
H
Y
2-3

Seal Technical Data
280 STANDARD Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
D
MAX
E
MIN
F
MAX
10 mm
G MIN
12 mm
16 mm
25
104
44
51
44
40
54
73
28
104
47
52
47
40
54
73
11
120
126
127
121
11
122
128
129
30
104
49
56
49
40
54
78
123
11
123
129
130
32
104
51
57
51
40
54
80
125
11
124
130
131
33
113
52
58
52
40
54
126
81
83
14
125
131
132
127
35
111
54
59
54
40
38
114
57
61
57
40
54
80
82
14
126
132
133
128
54
85
87
14
128
134
135
40
127
59
68
59
130
40
54
90
92
13
129
135
136
43
127
62
68
131
62
40
54
91
93
13
131
137
138
45
139
64
133
73
64
40
54
95
97
13
133
139
140
48
139
134
67
73
67
40
54
96
98
13
134
141
142
50
136
139
69
78
69
40
54
100
102
13
136
142
143
137
55
152
74
83
74
40
54
105
107
111
17
139
145
146
140
60
152
79
91
79
40
54
114
116
120
17
142
148
149
143
65
164
92
100
91
52
63
127
131
17
231
235
236
148
70
196
96
113
95
52
63
137
141
17
232
236
237
151
75
202
102
119
101
52
63
143
147
17
234
238
239
5-557
80
203
106
122
105
52
63
150
154
17
236
239
240
153
85
211
111
129
110
52
63
152
156
161
21
237
241
242
153
90
214
116
132
115
52
63
160
164
168
21
239
242
243
154
95
221
121
138
120
52
63
161
165
170
21
240
244
245
155
100
228
127
144
126
52
63
168
172
177
21
242
246
247
5-833
110
237
137
154
136
52
63
178
182
186
21
245
249
250
157
120
266
146
163
145
52
63
187
191
195
21
248
252
253
5-403
20 mm
E MIN
B MAX
C D A
G MIN
2-4

Seal Technical Data
280 KEY
280 SPECIFICATIONS
STANDARD MATERIALS**
Rotary Faces:
Carbon, Silicon Carbide, Tungsten Carbide
Stationary Faces:
Silicon Carbide, Tungsten Carbide
Elastomers:
Fluorocarbon, AFLAS or EPR installed
Metal Components:
316SS
Springs:
Hastelloy C*
* Haynes International, Inc., registered trademark
** Other materials available upon request
OPERATING LIMITS
Speed Limits:
To 20 m/s
Temperature Limits:
Pressure Limits:
To 40 bar g inboard 17 bar g outboard
up to 120 mm shaft size
Minimum Barrier Fluid Pressure:
2 bar g minimum barrier fluid pressure
recommended to properly lubricate
outboard seal
2-5
A
B
C
D
E
F
G
H
V
W
X
Y
Shaft Size
Seal Diameter in Stuffing Box
Minimum Stuffing Box Depth
Slot Width
Shaft O-Ring
Rotary O-Ring
Stationary O-Ring
Lock Ring

Seal Technical Data
UV EXTRA SMALL Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
D
MIN
E
10 mm
F MIN
12 mm
14 mm
25
118
41
53
30
124
46
58
32
125
48
59
33
126
49
35
128
51
45
69
71
73
62
45
75
77
79
68
45
75
77
79
69
60
45
75
77
79
70
64
45
80
80
84
72
UV SMALL Dimensional Data/Metric

A
B
MAX
C
MAX
E
10 mm
F MIN
12 mm
14 mm
G
16 mm
38
132
69
52
87
89
91
93
76
40
134
70
52
89
91
93
95
78
43
134
70
52
89
91
93
95
78
45
140
75
52
95
97
99
101
84
50
145
80
52
100
102
104
106
89
55
150
85
52
105
107
109
111
94
60
160
93
52
115
117
119
121
104
UV LARGE Dimensional Data/Metric

A
B
MAX
C
MAX
D
MIN
65
194
102
3,2
63,5
136
138
140
142
122
70
197
105
3,2
63,5
139
141
143
145
125
75
203
113
3,2
63,5
145
147
149
151
131
80
210
119
3,2
63,5
152
154
156
158
134
85
213
122
3,2
63,5
155
157
159
161
141
90
216
125
3,2
63,5
158
160
162
164
144
95
222
131
3,2
63,5
164
166
168
170
150
100
229
138
3,2
63,5
171
173
175
177
157
110
236
148
3,2
63,5
180
182
184
186
164
120
248
158
3,2
63,5
190
192
194
196
167
10 mm
F MIN
12 mm
14 mm
G
16 mm
UV Extra Small
UV Small
Metal Components:
316SS Major components
Springs:
Alloy C-276
UV Large
UV KEY
UV SPECIFICATIONS
STANDARD MATERIALS
Rotary Faces:
Carbon, Tungsten Carbide,
Graphitized Sintered Silicon Carbide (SSCG)
Stationary Faces:
Graphitized Sintered Silicon Carbide (SSCG),
Sintered Silicon Carbide (SSC)
OPERATING LIMITS
Speed Limits:
25 m/s max.
Temperature Limits:
To 205C Fluorocarbon, AFLAS*
To 260C ChemLast
Pressure Limits:
Full vacuum to 20 bar g
Consult Chesterton Applications Engineering
for services beyond these limits
*Asahi Glass Company Ltd. registered trademark
2-6
A
B
C
D
E
F
G
Shaft Size
Stuffing Box Bore
Hub Outside Diameter

Seal Technical Data
ZF Dimensional Data/Metric
A
C
MAX
G MIN
12 mm
10 mm
16 mm
35
Sulzer 1
118
60
29
34
95
20
126
028
134
225
38
ABS Scan 1
137
96
29
34
114
20
128
029
136
226
40
Sulzer 2
128
70
29
34
105
20
129
030
137
227
45
Sulzer 2
128
70
29
34
105
20
133
031
141
228
48
ABS Scan 2
147
106
30
34
124
20
134
032
142
229
50
Sulzer 3
150
85
29
34
125
20
136
033
144
230
55
Sulzer 3
150
85
29
34
125
20
139
034
147
232
60
Sulzer 4
160
95
29
34
135
20
142
036
150
233
65
Sulzer 4
160
102
38
46
135
26
231
148
236
340
65
ABS Scan 3
173
131
38
46
150
26
231
148
236
340
75
ABS Scan 4
183
141
38
46
160
26
234
151
239
343
80
Sulzer 5
199
119
38
46
170
26
236
152
241
345
85
Sulzer 5
199
122
38
46
170
26
237
153
242
346
90
Sulzer 6
209
125
38
46
180
26
239
153
244
348
95
Sulzer 6
209
131
38
46
180
26
240
154
245
349
100
ABS Scan 5
213
171
38
46
190
26
242
155
247
351
F
H
D A
VW X
ZF KEY
ZF SPECIFICATIONS
STANDARD MATERIALS
Rotary/Stationary Faces:
Carbon/
Tungsten Carbide/
Elastomers:
Fluorocarbon, AFLAS* or EPR installed
Metal Components:
316SS Major components
Springs:
Alloy C-276
OPERATING LIMITS**
Speed Limits:
25 m/s max.
Temperature Limits:
Pressure Limits:
Full vacuum to 20 bar g
* Asahi Glass Company Ltd. registered trademark
** Consult Chesterton Applications Engineering
for services beyond these limits
2-7
A
B
C
D
E
F
G
H
V
W
X
Y
Shaft Size
Pump Frame Number
Gland Thickness
Shaft O-Ring
Spring Protection O-Ring
Rotary O-Ring
Stationary O-Ring

Seal Technical Data
155 SMALL Dimensional Data/Metric

A
B
TABS
B
478
C
MIN
C
MAX
E
MIN
G MIN TABS
G MIN 478
8 mm 10 mm 12 mm 8 mm 10 mm 12 mm
25
118
108
44
51
43
16
48
70
72
74
71
73
28
118
108
47
52
46
16
48
70
72
74
71
73
24
44
24
47
30
124
111
49
57
48
16
48
76
78
80
77
32
124
114
51
58
50
16
48
77
79
81
78
79
24
49
80
24
51
33
124
114
52
59
51
16
48
76
78
80
35
128
127
54
62
52
16
48
80
82
84
78
80
24
52
86
88
24
54
38
133
127
57
67
56
16
48
85
87
40
134
127
59
68
58
16
48
86
88
89
86
88
24
57
90
86
88
90
24
59
43
134
127
62
69
61
16
48
86
45
140
139
64
73
63
16
48
92
88
90
86
88
90
24
62
94
96
92
94
96
24
64
48
139
139
67
74
66
16
48
91
93
95
92
94
50
145
139
69
78
68
16
48
97
99
101
96
98
96
24
67
100
24
69
55
150
158
74
83
73
16
48
102
104
106
112
114
60
160
158
79
91
78
16
48
112
114
116
113
115
116
24
74
117
24
80
40
12
57
62
120
124
126
1/8
40
12
57
62
121
126
128
1/8
40
12
60
68
123
127
129
1/8
40
12
62
69
124
128
130
1/8
40
12
62
69
125
129
131
1/8
40
12
70
72
126
130
132
1/8
40
12
70
77
128
132
134
1/8
40
12
73
78
129
134
135
1/8
40
12
73
78
131
135
137
1/8
40
12
79
84
132
136
138
1/8
40
12
79
84
134
139
140
1/8
40
12
82
89
136
140
142
1/8
40
12
94
94
139
143
145
1/8
40
12
99
104
142
146
148
1/8
E
MIN
F
W
U
A L P R
C D
N
B MAX
G MIN
K
1,5 mm Spring Gap

(Typical)
155 SPECIFICATIONS
Rotary Faces:
Silicon Carbide,
Tungsten Carbide
Stationary Faces:
Duplex Carbide, Carbon,
Elastomers:
Fluorcarbon or AFLAS installed,
EPR included
Metal Components:
316 SS
Springs:
Hastelloy C*
155 KEY
OPERATING LIMITS
Speed Limits
To 20 m/s
Temperature Limits:
To 205C Fluorcarbon, AFLAS
Pressure Limits:
To 40 bar g
Asahi Glass Company Ltd. , registered trademark
A
B
C
D
E
F
G
J
K
L
M
N
P
R
S
T
U
V
W
2-8
Shaft Size
Maximum Gland Tab Diameter
Hub Gland Flange Width
Distance from Stuffing Box Face
to Back of Tab
Lock Ring Diameter
to Set Screws
to Shaft O-Ring
Gland Step Diameter
Hub Gland Diameter
Shaft O-Ring
Rotary O-Ring
Stationary O-Ring
Gland O-Ring
(applies only to large sizes)
NPT Size

Seal Technical Data
155 LARGE Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
E
MIN
G MIN
10 mm 12 mm 16 mm
65
194
92
102
90
22
64
132
134
70
197
95
105
93
22
64
135
137
138
27
34
89
56
17
122
231
234
236
239
1/4
141
27
34
92
56
17
125
232
235
237
240
75
203
100
113
99
22
64
141
1/4
143
147
27
34
98
56
17
131
234
237
239
242
80
207
105
116
103
22
64
1/4
144
146
150
27
34
102
56
17
134
236
238
240
243
85
213
110
122
109
22
1/4
64
151
153
157
27
34
108
56
17
141
237
240
242
245
90
216
115
125
113
1/4
22
64
154
156
160
27
34
112
56
17
144
239
241
243
246
95
222
120
131
1/4
118
22
64
160
162
166
27
34
117
56
17
150
240
243
245
248
100
229
127
1/4
138
125
22
64
167
169
173
27
34
123
56
17
157
242
245
247
250
110
236
1/4
136
148
134
22
64
174
176
180
27
34
133
56
17
164
245
248
250
253
120
248
1/4
145
158
144
22
64
186
188
192
27
34
142
56
17
176
248
251
253
256
1/4
A L
E
MIN
C D
U
T
2,4 mm
Spring Gap
(Typical)
2-9

Seal Technical Data
255 SMALL Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
D
MAX
E
MIN
F
MAX
8 mm
G MIN
10 mm
12 mm
25
105
44
46
43
35
55
70
72
28
105
47
49
46
35
55
73
75
74
14
120
124
126
121
77
14
121
126
128
30
105
49
51
48
35
55
76
123
78
80
14
123
127
129
32
105
51
52
50
35
55
125
77
79
81
14
124
128
131
33
114
54
58
53
35
126
55
78
80
82
14
125
129
131
35
111
54
59
53
127
35
55
80
82
84
14
126
130
132
38
114
57
62
128
57
35
55
83
85
87
14
128
132
134
40
127
59
130
61
58
35
55
86
88
90
14
129
134
136
43
127
131
64
69
63
35
55
89
91
93
14
131
135
137
45
133
140
64
66
63
35
55
93
95
97
14
132
137
139
134
48
140
69
74
68
35
55
94
96
98
14
134
139
141
136
50
140
69
71
68
35
55
98
100
102
14
136
140
142
137
55
153
74
76
73
35
55
103
105
17
139
143
145
140
60
153
79
85
79
35
55
113
115
17
142
146
148
144
E
MIN
B MAX
G MIN
255 KEY
255 SPECIFICATIONS
Rotary Faces:
Silicon Carbide,
Tungsten Carbide
Stationary Faces:
Duplex Carbide, Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers:
Fluorcarbon or AFLAS installed,
EPR included
Metal Components:
316 SS
Springs:
Hastelloy C*
OPERATING LIMITS
Speed Limits
To 20 m/s
Temperature Limits:
To 205C Fluorcarbon, AFLAS
Pressure Limits:
To 40 bar g inboard
To 14 bar g outboard
Asahi Glass Company Ltd. , registered trademark
2 - 10
A
B
C
D
E
F
G
H
W
X
Y
Z
Shaft Size
Slot Width
Shaft O-Ring
Rotary Seal O-Ring (2)
Stationary Seal O-Ring (2)
Sleeve O-Ring

Seal Technical Data
255 LARGE Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
D
MAX
E
MIN
F
MAX
65
164
92
93
91
42
64
127
131
17
231
234
236
232
70
196
95
105
95
42
64
137
141
17
232
235
237
234
75
202
102
112
101
42
64
143
147
17
234
237
239
235
80
203
105
115
104
42
64
147
151
17
235
238
240
237
85
211
111
121
110
42
64
152
156
160
21
237
240
242
238
90
214
114
124
114
42
64
156
160
164
21
238
241
243
240
95
221
121
131
120
42
64
161
165
169
21
240
243
245
241
100
228
127
137
126
42
64
168
172
176
21
242
245
247
243
110
237
137
147
136
42
64
177
181
185
21
245
248
250
246
120
266
146
156
145
42
64
187
191
195
21
248
251
253
249
8 mm
GMIN
10 mm
E
MIN
B MAX
C D A
G MIN
255 MOTION CAPABILITIES

Size Range mm
Radial Motion* mm
Axial Motion mm
Thru 60
Thru 120
Thru 200
0,8
1,3
2,3
+/ 1,5
+/ 1,9
+/ 3,2
*Radial movement may be increased further by enlarging the stuffing box inside diameter.
2 - 11
12 mm

Seal Technical Data

A
B
MAX
C
MIN
C
MAX
E
MIN
32
124,7
47,2
53,3
33
124,7
47,2
53,3
37,6
4,3
37,6
4,3
35
126,7
49,3
60,5
37,6
38
130,3
52,3
63,5
40
133,6
55,6
43
136,7
45
G MIN
14 mm 16 mm
20 mm
22 mm
H
MIN
L
MAX
18 mm
86,9
59,9
70,9
219
86,9
59,9
70,9
220
86,6
88,6
66,8
72,6
221
87,9
89,9
91,9
69,9
75,9
223
89,0
91,0
93,0
95,0
73,2
79,0
223
90,3
92,3
94,3
96,3
98,3
76,2
82,3
224
45,2
90,3
92,3
94,3
96,3
98,3
76,2
82,3
225
4,3
45,2
93,3
95,3
97,3
99,3
101,3
79,5
85,3
226
37,6
4,3
45,2
96,6
98,6
100,6
102,6
104,6
82,6
88,6
226
37,6
4,3
45,2
99,9
101,9
103,9
105,9
107,9
85,9
91,9
228
4,3
45,2
106,8
108,8
110,8
112,8
114,8
92,2
98,8
230
6,6
56,9
138,5
140,5
142,5
144,5
146,5
120,7
126,5
231
6,6
56,9
138,5
140,5
142,5
144,5
146,5
120,7
126,5
233
6,6
56,9
144,8
146,8
148,8
150,8
152,8
127,0
132,8
234
46,7
6,6
56,9
151,2
153,2
155,2
157,2
159,2
133,4
139,2
236
127,0
46,7
6,6
56,9
157,5
159,5
161,5
163,5
165,5
139,7
145,5
237
104,1
127,0
46,7
6,6
56,9
157,5
159,5
161,5
163,5
165,5
139,7
145,5
239
110,5
133,4
46,7
6,6
56,9
163,9
165,9
167,9
169,9
171,9
146,1
151,9
241
229,1
116,8
139,7
46,7
6,6
56,9
170,5
172,5
174,5
176,5
178,5
152,4
158,5
242
110
241,8
129,5
152,4
46,7
6,6
56,9
183,2
185,2
187,2
189,2
191,2
165,1
171,2
245
115
241,8
129,5
152,4
46,7
6,6
56,9
183,2
185,2
187,2
189,2
191,2
165,1
171,2
247
120
248,2
135,9
158,8
46,7
6,6
56,9
189,5
191,5
193,5
195,5
197,5
171,5
177,5
248
125
286,4
150,1
177,8
73,9
7,4
87,6
214,6
216,6
218,6
190,5
196,6
-354
8 mm
10 mm
12 mm
45,2
78,9
80,9
82,9
84,9
45,2
78,9
80,9
82,9
84,9
4,3
45,2
80,6
82,6
84,6
37,6
4,3
45,2
83,9
85,9
66,8
37,6
4,3
45,2
87,0
58,7
70,0
37,6
4,3
45,2
136,7
58,7
70,0
37,6
4,3
48
139,7
62,0
73,2
37,6
50
143,0
65,0
76,2
55
146,3
68,3
79,2
60
152,7
74,7
85,6
37,6
65
197,1
85,1
108,0
46,7
70
197,1
85,1
108,0
46,7
75
203,5
91,4
114,3
46,7
80
209,8
97,8
120,7
85
216,2
104,1
90
216,2
95
222,8
100
130
292,8
155,1
184,2
73,9
7,4
87,6
220,9
222,9
224,9
196,9
202,9
-355
135
299,2
160,1
190,5
73,9
7,4
87,6
227,3
229,3
231,3
203,2
209,3
-356
140
299,2
165,2
190,5
73,9
7,4
87,6
227,3
229,3
231,3
203,2
209,3
-358
145
305,6
170,2
196,9
73,9
7,4
87,6
233,6
235,6
237,6
209,6
215,6
-359
150
312,0
175,2
203,2
73,9
7,4
87,6
240,0
242,0
244,0
215,9
222,0
-361
155
209,6
180,1
209,6
73,9
7,4
87,6
246,3
248,3
250,3
222,3
228,3
-362
160
324,7
185,1
215,9
73,9
7,4
87,6
253,0
255,0
257,0
228,6
235,0
-363
165
324,7
190,1
215,9
73,9
7,4
87,6
253,0
255,0
257,0
228,6
235,0
-364
170
331,0
195,1
222,3
73,9
7,4
87,6
259,3
261,3
263,3
235,0
241,3
-364
175
337,5
200,2
228,6
73,9
7,4
87,6
265,7
267,7
269,7
241,3
247,7
-365
180
337,5
205,2
228,6
73,9
7,4
87,6
272,0
274,0
276,0
241,3
254,0
-366
185
343,9
210,2
235,0
73,9
7,4
87,6
272,0
274,0
276,0
247,7
254,0
-367
190
350,2
215,1
241,3
73,9
7,4
87,6
278,4
280,4
282,4
254,0
260,4
-368
195
356,6
220,1
247,7
73,9
7,4
87,6
284,7
286,7
288,7
260,4
266,7
-368
442 SPECIFICATIONS
Rotary Faces:
Ceramic
Reaction Bonded Silicon Carbide
Stationary Faces:
Carbon
Elastomers:
AFLAS, Ethylene Propylene,
Fluorocarbon
Metal Components:
316SS
Springs:
Elgiloy*
OPERATING LIMITS
Speed Limits:
To 20 m/s
Temperature Limits:
To 120C
Pressure Limits:
All 442 seals can withstand operating
pressures from full vacuum 710 mm Hg
to the maximum pressures at the
conditions listed.
Small Sizes 32 mm through 60 mm
Carbon/Ceramic (3600 RPM) 24 bar g
Carbon/Reaction Bonded Silicon Carbide
(3600 RPM) 28 bar g
2 - 12
Pressure Limits:
Large Sizes 65 mm through 120 mm
(1750 RPM) 18 bar g
Extra Large Sizes 125 mm through 195 mm
(875 RPM) 14 bar g
The above pressure limits are for a standard 442 seal.
Higher speeds and pressures are possible
with the use of set screws. Consult factory for higher
operating conditions
* Elgiloy is a registered trademark of
Elgiloy Limited Partnership
** Consult factory for additional materials available

Seal Technical Data
F
E
N
L
B
M
H
P NPT
2 PLACES
442 KEY
A
B
C
D
E
F
G
H
Shaft Size
Min./Max. Stuffing Box Diameter
Gland Length
Outboard Space Required
Minimum Stuffing Box Face
Outside Diameter
L
M
N
O
P
Gland Hub Outside Diameter

Holder Inside Diameter from Box
Installation Dimension
Shaft O-Ring Number
NPT Size
SIZE
P NPT
up to 38 mm
up to 120 mm
up to 195 mm
13,5
13,5
26,0
2,4
2,4
4,8
.25
.375
.5O
442 MOUNTING CONFIGURATIONS
3 BOLTS
4 BOLTS
2 - 13

Seal Technical Data
4400 Dimensional Data/Metric

A
B
MAX
C
MAX
F
MAX
10 mm
G MIN
12 mm
16 mm
25
102
52
54
73
28
102
52
54
76
11
-120
-134
-024
-134
-124
-139
11
-122
-136
-026
-136
-126
30
102
58
54
80
-141
11
-123
-138
-028
-138
-128
32
111
62
54
83
-143
85
14
-124
-140
-029
-140
-130
-145
35
111
62
54
38
114
67
54
83
85
14
-126
-140
-029
-140
-130
-145
86
88
14
-128
-142
-030
-142
-132
40
127
69
-147
54
89
91
14
-129
-144
-031
-144
-134
43
139
-149
72
54
92
94
14
-131
-146
-032
-146
-136
45
-150
139
75
54
95
97
14
-133
-148
-033
-148
-138
-151
48
139
82
54
101
103
14
-134
-150
-034
-150
-140
-152
50
139
82
54
101
103
14
-136
-150
-034
-150
-140
-152
55
152
91
54
111
113
117
18
-139
-151
-036
-152
-144
-153
60
152
92
54
112
114
118
18
-142
-152
-037
-152
-146
-153
65
164
103
57
123
125
129
18
-145
-153
-040
-154
-151
-155
70
196
113
64
135
139
18
-232
-242
-151
-242
-235
-246
75
202
119
64
141
145
18
-234
-243
-152
-243
-236
-247
80
208
125
64
149
152
18
-236
-244
-153
-244
-237
-248
85
211
129
64
151
155
159
21
-237
-245
-153
-245
-238
-249
90
216
135
64
158
162
166
21
-239
-246
-154
-246
-239
-250
20 mm
B MAX
G MIN
4400 SPECIFICATIONS
STANDARD MATERIALS
Rotary Faces:
Sintered Silicon Carbide
Stationary Faces:
Carbon
Consult factory for additional
materials availability
Elastomers:
Fluorocarbon, EPR,
ChemLast, AFLAS*
Metal Components:
316SS
Springs:
Hastelloy C
Other materials available through
Chesterton Engineering Solutions
4400 KEY
OPERATING LIMITS
Speed Limits:
25 m/s max., 1,3 m/s min.
Contact Chesterton application
engineering regarding applications
exceeding these limits
Temperature Limits:
260C max. (Elastomers)
Pressure Limits:
25 mm to 65 mm 20 bar g
70 mm to 90 mm 17 bar g
TwinHybrid and Self-Centering Lock Ring
are trademarks of A.W. Chesterton Company
* Asahi Glass Company Ltd., registered trademark
Haynes International, Inc., registered trademark
2 - 14
A
B
C
F
G
H
T
U
V
W
Shaft Size
Slot Width
Shaft O-Ring
Rotary Seal O-Ring
Rotary Cushion O-Ring
Stationary Seal O-Ring
Outside Diameter
X Stationary Seal O-Ring
Inside Diameter
Y Gland Adapter O-Ring

Seal Technical Data

A
16
28,9
31
23
27
35,0
30
5,0
1,5
M4
18
32,3
34
27
33
37,5
30
7,5
2,0
M4
20
34,3
36
29
35
37,5
30
7,5
2,0
M4
22
36,3
38
31
37
37,5
30
7,5
2,0
M4
24
38,4
40
33
39
37,5
30
7,5
2,0
M4
25
39,3
41
34
40
37,5
30
7,5
2,0
M4
28
42,3
44
37
43
42,5
35
7,5
2,0
M5
30
44,3
46
39
45
42,5
35
7,5
2,0
M5
32
46,4
48
42
48
42,5
35
7,5
2,0
M5
33
48,0
49
42
48
42,5
35
7,5
2,0
M5
35
49,5
51
44
50
42,5
35
7,5
2,0
M5
38
54,3
58
49
56
44,0
35
9,0
2,0
M5
40
56,1
60
51
58
44,0
35
9,0
2,0
M5
43
59,1
63
54
61
44,0
35
9,0
2,0
M5
45
61,1
65
56
63
44,0
35
9,0
2,0
M5
48
64,2
68
59
66
44,0
35
9,0
2,0
M5
50
66,1
70
62
70
44,5
35
9,5
2,5
M5
53
69,1
73
65
73
46,0
35
11,0
2,5
M5
55
71,1
75
67
75
46,0
35
11,0
2,5
M5
60
76,1
85
72
80
46,0
35
11,0
2,5
M5
65
81,1
90
77
85
46,0
35
11,0
2,5
M5
68
86,1
93
81
90
46,3
35
11,3
2,5
M5
70
86,1
95
83
92
46,3
35
11,3
2,5
M5
75
98,6
104
88
97
59,3
48
11,3
2,5
M6
80
104,2
109
95
105
60,0
48
12,0
3,0
M6
85
108,1
114
100
110
60,0
48
12,0
3,0
M6
90
114,0
119
105
115
62,0
48
14,0
3,0
M6
100
117,6
129
115
125
62,0
48
14,0
3,0
M6
110
133,5
139
125
135
62,0
48
14,0
3,0
M6
J
K
G
F
491 SPECIFICATIONS
STANDARD MATERIALS
Seal Faces Available:
Carbon rotary face
99.7% Ceramic or Sintered Silicon
Carbide stationary seat
Elastomers:
Ethylene Propylene
Fluorocarbon
Metal Components:
316SS Rotary holder
Springs:
Hastelloy C*
OPERATING LIMITS
Speed Limits:
Surface speed to 10 m/s
Rotational speed to 3600 RPM
Temperature Limits:
To 180C
Pressure Limits:
To 10 bar g
2 - 15

Seal Technical Data

A
16
30,45
35,00
115
120
85
107,95
50,80
237
241
18
32,28
35,00
116
121
90
114,30
50,80
239
243
20
34,29
35,00
117
122
95
117,48
50,80
240
244
22
36,30
35,00
118
123
100
123,83
50,80
242
246
24
38,30
35,00
119
125
110
133,35
50,80
246
249
25
39,29
35,00
120
125
120
152,40
92,07
351
356
28
42,29
35,00
122
127
125
158,75
92,07
353
358
30
44,30
35,00
123
128
130
165,10
92,07
354
360
32
46,30
44,45
124
130
135
171,45
92,07
356
362
33
47,90
44,45
125
131
140
171,45
92,07
357
362
35
49,48
44,45
126
132
145
177,80
92,07
359
363
38
54,28
44,45
128
134
150
184,15
92,07
361
364
40
56,08
44,45
129
135
155
190,50
92,07
361
365
43
59,08
44,45
131
137
160
196,85
92,07
363
366
45
61,09
44,45
133
139
165
196,85
92,07
363
366
48
64,11
44,45
134
141
170
203,20
92,07
364
367
50
66,09
44,45
136
142
175
209,55
92,07
365
368
55
71,07
44,45
139
145
180
215,90
92,07
366
369
60
77,14
44,45
142
148
185
215,90
92,07
366
369
65
83,01
44,45
145
151
190
222,25
92,07
367
370
70
86,08
44,45
148
152
195
228,60
92,07
368
371
75
98,43
50,80
234
238
200
234,95
92,07
369
372
80
104,78
50,80
236
240
C A
891 KEY
891 SPECIFICATIONS
STANDARD MATERIALS
Seal Faces Available:
Grade P658RC Carbon
Solid Tungsten Carbide
Elastomers:
Fluoroelastomer installed
Ethylene Propylene supplied as spare
ChemLast available upon request
Metal Components:
316SS
Available in Alloy, Alloy 20, Titanium,
Monel**, Nickel or Hastelloy B* or C*
Springs:
Hastelloy C*
OPERATING LIMITS
Temperature Limits:
To 205C with Fluoroelastomer
To 150C with Ethylene Propylene
15C to 260C with ChemLast
Pressure Limits:
711 mm Hg vacuum to 42 bar g
depending on shaft size and speed
Sizes 18 mm to 30 mm limited to 21 bar g max.
** Inco family of companies registered trademark
2 - 16
A
C
D
E
F
Shaft Size
Outer Diameter
Operating Length
Static O-Ring
Dynamic O-Ring

Seal Technical Data
VDMA Stationary
L-SHAPE Stationary
SHAFT
SIZE
O-RING
SHAFT
SIZE
18
32,6
6,5
17,0
26,58 x 3,53
33
26,5
18
33,9
6,6
46,0
17
20
34,6
6,5
17,0
28,17 x 3,53
35
28,5
20
35,9
6,6
48,0
17
22
36,6
6,5
17,0
29,74 x 3,53
37
30,5
22
37,9
6,6
50,0
17
24
38,6
6,5
17,0
31,94 x 3,53
39
32,5
24
39,9
6,6
53,2
17
25
39,6
6,5
17,0
32,92 x 3,53
40
33,5
25
40,9
6,6
53,2
17
28
42,6
6,5
17,0
36,09 x 3,53
43
36,5
28
43,9
6,6
56,4
17
30
44,6
6,5
17,0
37,69 x 3,53
45
38,5
30
45,9
6,6
59,5
17
32
47,6
6,5
17,0
40,87 x 3,53
48
41,5
32
47,9
6,6
59,5
17
33
47,6
6,5
17,0
40,87 x 3,53
48
41,5
33
48,9
6.6
59,5
17
35
49,6
6,5
17,0
44,04 x 3,53
50
43,5
35
50,9
6,6
61,1
17
38
55,6
7,0
18,0
48,00 x 4,00
56
48,5
38
57,9
6,6
68,9
17
40
57,6
7,0
18,0
50,00 x 4,00
58
50,5
40
59,9
6,6
72,1
17
43
60,6
7,0
18,0
52,00 x 4,00
61
53,5
42
61,9
6,6
72,1
17
45
62,6
7,0
18,0
55,00 x 4,00
63
55,5
43
62,9
6,6
78,5
17
48
65,6
7,0
18,0
58,00 x 4,00
66
58,5
45
64,9
6,6
78,5
17
50
69,6
8,5
20,0
60,00 x 4,50
70
61,5
48
67,9
6,6
81,6
17
55
74,6
8,5
20,0
65,00 x 4,50
75
66,5
50
69,9
6,6
81,6
17
60
79,5
8,5
20,0
70,00 x 4,50
80
71,5
53
72,9
6,6
88,0
17
65
85,4
8,5
20,0
75,00 x 4,50
85
76,5
55
74,9
6,6
94,3
17
70
91,4
10,0
22,0
82,00 x 5,00
92
82,5
60
84,9
6,6
98,2
20
75
96,4
10,0
22,0
87,00 x 5,00
97
87,5
65
89,9
6,6
106,9
20
80
104,3
10,0
22,5
95,00 x 5,50
105
94,5
70
94,9
6,6
110,7
25
85
109,3
10,0
22,5
100,00 x 5,50
110
99,5
75
103,9
6,6
115,5
25
90
114,3
10,0
22,5
105,00 x 5,50
115
104,5
80
108,9
6,6
123,4
25
95
119,3
10,0
22,5
110,00 x 5,50
120
109,5
85
113,9
6,6
125,5
25
100
124,3
10,0
22,5
115,00 x 5,50
125
114,5
90
118,9
6,6
133,0
25
110
134,3
10,0
22,5
120,00 x 5,50
135
124,5
95
120,9
6,6
136,1
25
100
128,9
6,6
142,5
25
110
138,9
6,6
155,2
25
SAS Self Aligning Stationary Unit

SHAFT
SIZE
O-RING
25
40,0
6,4
53,2
16
125
28
43,0
6,4
56,4
16
127
30
45,0
6,4
59,5
16
128
32
47,2
6,4
59,4
16
130
33
48,0
6,4
59,5
16
131
35
50,4
6,4
61,2
16
132
38
56,8
6,4
69,1
16
134
40
59,0
6,4
72,2
16
135
42
61,0
6,4
72,2
16
137
43
62,0
6,4
78,6
16
137
45
64,0
6,4
78,6
16
139
48
67,0
6,4
81,8
16
141
50
69,0
6,4
81,8
16
142
53
72,0
6,4
88,1
16
144
55
74,0
6,4
94,5
16
145
60
77,4
6,4
98,4
16
148
65
85,3
6,4
107,2
16
151
70
87,3
6,4
111,1
25,4
235
75
93,6
6,4
115,8
25,4
237
80
100,0
6,4
123,8
25,4
239
85
103,2
6,4
127,0
25,4
240
90
109,5
6,4
130,1
25,4
242
95
112,7
6,4
136,5
25,4
243
100
119,0
6,4
142,9
25,4
245
110
131,7
6,4
155,6
25,4
249
L-Shaped Stationary
B
VDMA Stationary
C
C
B
A
D
D A
E
SAS Stationary
5,5
C
A
D
2 - 17

Seal Technical Data
442 MIXER STANDARD Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
E
MIN
38
134,1
53,6
67,4
40
137,3
56,8
70,2
37,6
4,3
37,6
4,3
43
140,5
60,0
73,4
37,6
45
140,5
60,0
73,4
48
143,6
63,1
50
146,8
55
150,0
60
Shaft Sizes: 38 mm to 120 mm
G MIN
12 mm 14 mm
18 mm
H
MIN
16 mm
73,8
13,5
2,4
223
76,2
13,5
2,4
223
100,1
79,2
13,5
2,4
224
98,1
100,1
79,2
13,5
2,4
225
99,4
101,4
103,4
82,6
13,5
2,4
226
45,2
104,5
106,5
108,5
110,5
86,4
13,5
2,4
226
45,2
107,8
109,8
111,8
113,8
89,7
13,5
2,4
228
4,3
45,2
119,7
121,7
123,7
125,7
101,6
13,5
2,4
230
46,7
6,6
56,9
145,9
147,9
149,9
151,9
127,8
13,5
2,4
231
46,7
6,6
56,9
145,9
147,9
149,9
151,9
127,8
13,5
2,4
233
121,4
46,7
6,6
56,9
152,2
154,2
156,2
158,2
134,1
13,5
2,4
234
100,6
127,8
46,7
6,6
56,9
157,6
159,6
161,6
163,6
165,6
167,6
140,5
13,5
2,4
236
223,1
106,9
134,1
46,7
6,6
56,9
164.0
166,0
168,0
170,0
172,0
174,0
146,8
13,5
2,4
237
223,1
106,9
134,1
46,7
6,6
56,9
164,0
166,0
168,0
170,0
172,0
174,0
146,8
13,5
2,4
239
95
229,5
113,3
140,5
46,7
6,6
56,9
170,3
172,3
174,3
176,3
178,3
180,3
153,2
13,5
2,4
241
100
235,8
119,6
146,8
46,7
6,6
56,9
176,7
178,7
180,7
182,7
184,7
186,7
159,5
13,5
2,4
242
110
248,5
132,3
159,5
46,7
6,6
56,9
189,4
191,4
193,4
195,4
197,4
199,4
172,2
13,5
2,4
245
115
248,5
132,3
159,5
46,7
6,6
56,9
189,4
191,4
193,4
195,4
197,4
199,4
172,2
13,5
2,4
247
120
254,9
138,7
159,5
46,7
6,6
56,9
189,4
191,4
193,4
195,4
197,4
199,4
172,2
13,5
2,4
248
8 mm
10 mm
45,2
90,6
92,6
94,6
45,2
93,0
95,0
97,0
4,3
45,2
96,1
98,1
37,6
4,3
45,2
96,1
76,6
37,6
4,3
45,2
66,3
80,3
37,6
4,3
69,5
83,3
37,6
4,3
156,3
75,8
94,1
37,6
65
204,1
87.9
115,1
70
204,1
87,9
115,1
75
210,4
94,2
80
216,8
85
90
F
E
45
N
90
M
B
H C
3/8 NPT
2 PLACES
G
442M SPECIFICATIONS
STANDARD MATERIALS
Rotary Faces:
Carbon, Reaction Bonded Silicon Carbide
Stationary Faces:
Elastomers:
AFLAS, Ethylene Propylene,
Fluorocarbon
Metal Components:**
316SS
Springs:
Elgiloy*
442M KEY
OPERATING LIMITS
Speed Limits:
To 20 m/s
Temperature Limits:
To 120C
Pressure Limits:
To 15 bar g
* Elgiloy is a registered trademark of
Elgiloy Limited Partnership
** Consult factory for additional materials available
2 - 18
A
B
C
D
E
F
G
H
L
M
N
O
Shaft Size
Min./Max. Stuffing Box Diameter
Gland Length
Outboard Space Required
Minimum Stuffing Box Face
Outside Diameter
Gland Hub Outside Diameter
Holder Inside Diameter from Box
Installation Dimension
Shaft O-Ring Number

Seal Technical Data
442 MIXER EXTRA LARGE Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
E
MIN
125
292,8
153,7
181,6
130
299,2
156,8
188,0
73,9
7,4
73,9
7,4
135
305,6
163,2
194,3
73,9
140
305,6
166,4
194,3
145
312,0
172,7
150
318,3
155
Shaft Sizes: 125 mm to 190 mm
G MIN
20 mm
L
MAX
22 mm
H
MIN
18 mm
87,6
221,4
223,4
225,4
196,9
202,9
26,2
4,8
354
87,6
227,8
229,8
231,8
203,2
209,3
26,2
4,8
355
7,4
87,6
234,1
236,1
238,1
209,6
215,7
26,2
4,8
356
73,9
7,4
87,6
234,1
236,1
238,1
209,6
215,7
26,2
4,8
358
200,7
73,9
7,4
87,6
240,5
242,5
244,5
215,9
222,1
26,2
4,8
359
179,1
207,0
73,9
7,4
87,6
246,8
248,8
250,8
222,3
228,4
26,2
4,8
361
324,7
182,2
213,4
73,9
7,4
87,6
253,2
255,2
257,2
228,6
234,8
26,2
4,8
362
160
331,1
188,6
219,7
73,9
7,4
87,6
259,5
261,5
263,5
235,0
241,2
26,2
4,8
363
165
331,1
191,8
219,7
73,9
7,4
87,6
259,5
261,5
263,5
235,0
241,2
26,2
4,8
364
170
337,5
198,1
226,1
73,9
7,4
87,6
265,9
267,9
269,9
241,3
247,6
26,2
4,8
364
175
343,9
201,3
232,4
73,9
7,4
87,6
272,2
274,2
276,2
247,7
254,0
26,2
4,8
365
180
350,2
207,6
238,8
73,9
7,4
87,6
278,6
280,6
282,6
254,0
260,4
26,2
4,8
366
185
350,2
210,8
238,8
73,9
7,4
87,6
278,6
280,6
282,6
254,0
260,4
26,2
4,8
367
190
356,6
217,2
245,1
73,9
7,4
87,6
284,9
286,9
288,9
260,4
266,8
26,2
4,8
368
F
E
L
M
B
1/2 NPT
2 PLACES
O
10
27
442 MIXER RADIAL MOTION VS. PRESSURE CAPABILITY

Pressure Operating Limits at Maximum Shaft Runout
442 MIXER Small (38 mm to 60 mm)
Pressure (bar g)
TIR (mm)
14
0,76
10
1,5
8,5
2,3
442 MIXER Large (65 mm to 120 mm)

Pressure (bar g)
TIR (mm)
10
1,3
8,5
2,5
5,5
3,8
2 - 19
442 MIXER Extra Large (125 mm to 190 mm)

Pressure (bar g)
TIR (mm)
10
2,0
8,5
3,0
5,5
3,8

Seal Technical Data
280 MIXER Dimensional Data/Metric

A
B
MAX
C
MIN
C
MAX
D
MAX
E
MIN
F
MAX
8 mm
G MIN
10 mm
12 mm
35
114
60
62
56
40
54
85
88
38
127
63
68
59
40
54
90
93
14
126
134
135
130
14
128
136
137
60
165
86
97
82
40
54
118
132
121
124
17
142
150
151
146
65
199
102
116
98
52
63
12 mm
16 mm
20 mm
140
143
70
202
108
119
101
52
17
231
237
238
151
63
144
147
17
232
238
239
152
75
208
114
125
107
80
211
117
129
110
52
63
151
154
17
234
240
241
153
52
63
153
156
159
21
235
241
242
153
85
216
124
135
90
225
130
141
117
52
63
160
164
167
21
237
243
244
154
123
52
63
166
169
172
21
239
245
246
95
228
133
155
144
126
52
63
169
172
176
21
240
246
247
100
228
156
140
151
132
52
63
176
179
182
21
242
248
249
156
110
241
149
160
142
52
63
21
245
251
252
158
185
188
191
20 mm
24 mm
30 mm
120
279
171
162
83
104
227
230
236
351
359
361
253
130
292
184
175
83
104
239
242
248
355
362
363
257
140
298
191
181
83
104
246
249
255
357
363
364
259
150
311
203
194
83
104
258
261
267
361
365
366
260
160
323
216
207
83
104
271
274
280
363
367
368
262
170
330
222
213
83
104
277
280
286
364
368
369
263
180
342
235
226
83
104
290
293
299
366
370
371
265
190
349
241
232
83
104
296
299
305
367
371
372
266
200
361
254
245
83
104
309
312
318
369
373
374
268
B MAX
E MIN
C D A
G MIN
*Haynes International, Inc., registered trademark

280M KEY
280 MIXER SPECIFICATIONS

STANDARD MATERIALS
Rotary Faces:
Carbon, Silicon Carbide, Tungsten Carbide
Stationary Faces:
Elastomers:
Fluorocarbon, AFLAS or EPR installed
Metal Components:
316SS
Springs:
Hastelloy C*
OPERATING LIMITS
Speed Limits:
To 20 m/s
Temperature Limits:
To 260C ChemLast
Pressure Limits:
Minimum Barrier Fluid Pressure:
2 bar g minimum barrier fluid pressure
recommended to properly lubricate
outboard seal
2 - 20
A
B
C
D
E
F
G
H
V
W
X
Y
Shaft Size
Slot Width
Shaft O-Ring
Rotary O-Ring
Stationary O-Ring
Lock Ring

Seal Technical Data
280 MIXER JUMBO Dimensional Data/Metric

A
B
MAX
C
MIN
D
MAX
E
MIN
F
MAX
20 mm
G MIN
24 mm
30 mm
210
457
292
280
109
145
368
372
220
470
305
292
109
145
381
385
378
446
449
450
374
391
447
450
451
230
470
305
292
109
145
381
376
385
391
447
450
451
240
483
318
305
109
145
376
394
398
404
448
451
452
250
496
330
318
109
378
145
406
410
417
449
452
453
260
508
343
330
379
109
145
419
423
429
450
453
454
270
521
356
380
343
109
145
432
436
442
451
454
455
280
521
381
356
343
109
145
432
436
442
451
454
455
290
381
534
368
356
109
145
445
449
455
452
455
456
5-902
300
546
381
369
109
145
457
461
467
453
456
457
382
280 MIXER MOTION CAPABILITIES

Size Range mm
Radial Motion* mm
Axial Motion mm
Thru 60
Thru 110
Thru 200
Thru 60
Thru 110
Thru 200
0,8
1,3
2,3
0,8
4,8
6,4
+/ 1,5
+/ 1,9
+/ 3,2
+/ 1,5
+/ 1,9
+/ 3,2
*Radial movement may be increased further by enlarging the stuffing box inside diameter.
2 - 21

Seal Technical Data
186HT STANDARD Dimensional Data/Metric

A
B
MAX
C
MIN
Ca*
MIN
D
MAX
E
MIN
F
MAX
Fa**
MAX
G
12 mm
16 mm
H
MAX
J
MAX
10 mm
25
108
48
54
46
42
49
52
76
78
13
32
3/8
30
108
51
57
49
42
49
52
79
82
13
32
3/8
32
114
57
60
55
43
49
52
81
99
13
32
3/8
35
121
60
67
58
43
50
54
89
92
14
34
3/8
38
133
64
70
61
43
50
54
92
95
14
34
1/2
40
140
67
73
65
43
50
54
95
98
14
34
1/2
42
140
67
73
65
43
50
54
95
98
14
34
1/2
45
146
70
76
68
43
50
54
98
101
14
34
1/2
50
159
76
80
74
46
52
55
108
111
114
18
35
1/2
55
159
79
89
77
46
52
55
111
114
117
18
35
1/2
60
165
86
92
84
46
54
57
114
117
120
18
37
1/2
65
165
89
95
87
46
54
57
117
120
123
18
37
1/2
186HT Standard ANSI

F
J
H
C
D A
Ca
Fa
186HT API
186HT KEY
186HT SPECIFICATIONS
STANDARD MATERIALS
Rotary Faces:
Blister-resistant Carbon, Tungsten Carbide
Stationary Faces:
Metal Components:
316SS
Bellows:
AM350 heat-treated
718 Inconel heat-treated (corrosive services)
End Fittings:
Low expansion alloy 42
Secondary Seals
Grafoil packing
OPERATING LIMITS
Speed Limits:
To 20 m/s
Temperature Limits:
73C to 427C
A
B
C
Ca*
D
E
Fa**
G
H
J
Shaft Size
Gland Outside Diameter
Stuffing Box Bore
API Box Bore
IB Seal Diameter
Stuffing Box Depth
API Outboard Seal Length
Slot Width
Gland Width
NPT
* Minimum Bore Diameter Ca for ID Pilot

** OB Length Fa with Pilot design and metallic face gasket
2 - 22

Seal Technical Data
886HT ROTARY ASSEMBLY Dimensional Data/Metric

A
25
39,7
42,8
3,2
C
28
42,8
39,7
3,2
30
46,0
42,8
3,2
32
46,0
42,8
3,2
35
49,2
44,5
3,2
38
55,1
44,5
4,2
40
58,3
44,5
4,2
42
61,5
44,5
4,2
45
62,3
44,5
4,2
48
64,6
44,5
4,2
50
67,8
44,5
4,2
55
74,2
47,6
4,2
60
77,3
47,6
4,2
65
84,1
47,6
4,2
B
A
886HT STATIONARY ASSEMBLY Dimensional Data/Metric

A
25
41,2
11,1
35,1
14,0
9,9
6,1
6,6
3,1
28
44,4
11,1
38,3
14,0
9,9
6,1
6,6
3,1
30
47,6
11,1
41,5
14,0
9,9
6,1
6,6
3,1
32
47,6
11,1
41,5
14,0
9,9
6,1
6,6
3,1
35
50,8
11,1
44,6
14,0
9,9
6,1
6,6
3,1
38
53,9
11,1
47,8
14,0
9,9
6,1
6,6
3,1
40
60,3
12,7
54,2
15,0
10,9
6,3
7,9
3,1
42
63,5
12,7
57,3
15,0
10,9
6,3
7,9
3,1
45
66,6
12,7
60,5
15,0
10,9
6,3
7,9
3,1
48
69,8
12,7
63,7
15,0
10,9
6,3
7,9
3,1
50
76,2
14,2
70,0
16,2
12,1
7,6
8,7
3,9
55
79,3
14,2
73,2
16,2
12,1
7,6
8,7
3,9
60
82,5
14,2
76,4
16,2
12,1
7,6
8,7
3,9
65
85,7
15,8
79,6
17,3
13,2
8,6
9,6
4,3
H
J
K
3/32 PIN
15
G
A
L
M
F
886HT KEY
886HT SPECIFICATIONS
STANDARD MATERIALS
Rotary Faces:
Blister-resistant Carbon, Tungsten Carbide
Stationary Faces:
Metal Components:
316SS
Bellows:
AM350 heat-treated
718 Inconel heat-treated (corrosive services)
End Fittings:
Low expansion alloy 42
Secondary Seals
Grafoil packing
OPERATING LIMITS
Speed Limits:
To 20 m/s
Temperature Limits:
73C to 427C
2 - 23
A
B
C
D
E
F
G
H
J
K
L
M
Shaft Size
Outside Diameter
Operating Length
Screw Head Protrusion
Stationary Bore Diameter
Stationary Length
Cavity Step Diameter
Cavity Depth
Bore Depth
Cavity Step Depth
Nose Length
Pin Extrusion
Section 3
Seal Recommendations
by Fluid

CONCENTRATION AND
TEMPERATURE RANGES
Concentration: Listed as a percentage of
the pure component. The diluent for all non
100% entries is water unless otherwise noted.
<SP indicates the seal recommendation is valid
for any concentration less than the solubility
point of the substance in water.
Temperature: Temperature or range listed in
degrees Celsius (C)/(F) for which the seal
recommendation is applicable at the specified
concentration.
CAS
CAS numbers are internationally recognized
and are a resource for scientists, industry
and regulatory bodies. The numbers are
unique identifiers for chemical substances.
A CAS Registry Number has no inherent
chemical significance but provides an
unambiguous way to identify a chemical
substance or molecular structure when there
are many possible generic, trade or trivial names.
NOTES ON FLUIDS LISTED

Typically, the common name of each substance
listed in alphabetical order. If the entry is
followed by parenthetic text, the added text
gives additional description to the substance.
For example, an entry followed by (TM.) indicates
the name is a trademark. In some cases, where
the substances acronym may be as common
as the actual name, we have listed the acronym
in parenthesis. An example would be Polyvinyl
Alcohol (PVA). Other primary statements include:
Aerated -Indicates the recommendation is for
the fluid stream containing entrained air.
The entrained air changes the seal material
selection for the fluid in its uncontaminated state.
Wet-Indicates the recommendation is for the fluid
stream containing a small percentage of water.
The water contamination changes the seal
material selection for the fluid in its
uncontaminated state.
Gas - Indicates the stated recommendation
is for the material in the gaseous phase.
Recommendations without this designation
are for the liquid phase.
Phase - Used as a general indicator of what
phase the substance, undiluted or neat, is at
ambient temperature and atmospheric pressure.
C - Solid or crystalline state: material must be
dissolved or suspended in solution or heated
to a liquid to be sealed.
G - Gas: seal recommendations for gases
assume the gas is liquefied or in the liquid state
unless specified. Carbon Dioxide (gas) would
indicate this seal recommendation is for
Carbon Dioxide in its gaseous state, not liquefied.
L - Liquid
V - Viscous liquid
PIPING PLANS
The recommended piping plan or choice of
plans to be utilized to enhance seal life and
performance based on the API Auxiliary
Piping Systems for mechanical seals.
There is no piping plan designated for
applications which typically do not require
one. Where more than one plan is listed:
Plan 1, Plan 2 (separated by a comma)
Use the most appropriate plan for your
application
Plan 1/Plan 2 (separated by a slash)
Use both plans in conjunction for
the application
HAZARD INFORMATION
With the exception of Carcinogenicity,
hazard classifications listed are determined
according to the internationally recognized
European Council Directive 96/54/EC,
dealing with the classification, packaging,
and labeling of dangerous substances.
Carcinogenicity classifications listed
are reported using the evaluations of the
International Agency for Research on Cancer
(IARC), Groups 1, 2A, or 2B.
The definitions listed below illustrate
the relative hazard of each group but is not
the full definition as stated in each of the
compilations. If the full definition is required
please review the aforementioned
documents.
Code - C: Corrosive - Substance causes burns
to skin tissue when in contact with either the
vapor, fluid, or solid phase of the substance.
Code - Ca: Carcinogen - Substance is a
suspect human carcinogen.
Code - E: Explosive - There is a risk of an
explosion when substance is subjected to
shock, friction, fire, or other sources of ignition.
Code - F+: Extremely Flammable - Liquid
substance having a flash point lower than
0 C and a boiling point lower than or equal
to 35 C or gaseous substances which are
flammable in contact with air at ambient
temperature and pressure.
Code - F: Highly Flammable - Liquid substance
typically having a flash point lower than 21 C.
Code - R10: Flammable -Liquid substance
typically having a flash point equal to or
greater than 21 C, and less than or equal
to 55 C.
Code - O: Oxidizing - Substance which may
themselves cause fire or enhance the risk
of fire when in contact with combustibles.
Code - N: Environment - Substance which is
hazardous to ecosystems
Code - T+: Very Toxic - Substance which is very
toxic by ingestion (LD50 oral, rat 25 mg/kg),
skin contact, or by inhalation.
Code - T: Toxic -Substance which is toxic
by ingestion (LD50 oral, rat 200 mg/kg),
skin contact, or by inhalation.
Code -Xi: Irritant - Substance causes
significant inflammation of the skin or eyes
and persists for at least 24 hours.
Code -Xn: Harmful - Substance which is
harmful by ingestion(LD50 oral, rat
2000 mg/kg), skin contact, or by inhalation.
3-2
Code - * : Substance currently does not have a

CAS Number listed; therefore, substance
has not been classified accordingly.
No Code: Substance is not classified under the
parameters specified in the regulations. It does
not necessarily mean that there are no hazards
associated with the substance.
MATERIALS OF CONSTRUCTION PERFORMANCE RATING

Materials of construction are grouped by
metallurgy, faces and secondary seals.
Performance capabilities of the seal materials are
rated A = Acceptable and B = Alternate Choice.
These ratings are based on existing published
data (references), laboratory tests, and informed
decisions on the part of Chesterton Engineering.
Typically, an A rating in the same group of
materials will have similar performance
characteristics. Materials rated B may experience
changes in properties which may reduce seal life
and should be considered as an alternate choice.
A more definitive explanation is as follows:
Metals:
A - Preferred material of construction, .002 inches
per year corrosion (0.05 mm/yr.). On some rare
occasions an (A) rating may exceed .002 inches
per year. This material is a preferred material due
to its ability to retain mechanical properties
over other materials, cost constraints, material
availability, and machinability.
B - Alternate material of construction,
.020 inches per year corrosion (0.50 mm/yr.).
The effect to mechanical properties may
be significant enough for failure.
Elastomers:
A - Volumetric swell is negligible after
exposure. Under process pressure and
elevated temperatures some loss of physical
properties may occur.
B - Volumetric swell is in excess 10% after
exposure. Physical property loss and material
degradation may be significant enough for failure.
Face Materials:
A - Material is not affected, chemically, by
the pumped fluid.
B -The effect to physical properties may be
significant enough for failure due to chemical
attack of fillers, binders, and additive materials
used in the manufacturing processes.
TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Acetamide
<SP >85 >185 60-35-5 255 TC/CB-CB/TC-S-FFKM
53,54 280 CB/SSC-SSC/CB-S-FFKM 53,54
Acetic Acid
>40 <100 <212 64-19-7 180 CB/SSC -HC/S-EPDM
11,13 440 CB/RSC-S-EPDM
11,13
Acetic Acid
<40 <100 <212 64-19-7 180 CB/SSC-S-EPDM
11,13 442 CR/CB-S-EPDM
11,13
Acetic Acid
<10 <100 <212 64-19-7 180 CB/SSC-S-EPDM
11,13
Acetic Acid (glacial)
>96 <120 <248 64-19-7 255 SSC/CB-CB/SSC-S-FFKM
Acetic Acid Amine;See Acetamide
Acetic Anhydride
100 <20 <68 108-24-7 255 SSC/CB-CB/SSC-S-FFKM
Acetic Anhydride
<60 <80 <176 108-24-7 180 CB/SSC -HC/S-FFKM
11,13 440 CB/RSC-S-FFKM
11,13
Acetic Anhydride
<30 <80 <176 108-24-7 255 SSC/CB-CB/SSC-S-FFKM
Acetone
100 <30 <86 67-64-1 180 CB/SSC-S-EPDM
11,13 442 RSC/CB-S-EPDM
11,13
Acetone
100 <100 <212 67-64-1 255 TC/CB-CB/TC-S-EPDM
53,54 280 CB/SSC-SSC/CB-S-EPDM 53,54
Acetonitrile
100 <100 <212 75-05-8 255 TC/CB-CB/TC-S-FFKM
Acetophenone
100 <60 <140 98-86-2 180 CB/TC-S-EPDM
11,13
Acetyl Chloride
100 <20 <68 75-36-5 255 SSC/SSC-CB/SSC-HC-FKM
53,54 280 SSC/SSC-SSC/CB-HC-FKM 53,53
Acetylacetone
100 <20 <68 123-35-6 180 CB/TC-S-EPDM
11,13
Acetylene (gas)
100 <100 <212 74-86-2 4400H SSC/CB-S-NBR
32
Acetylene
100 <20 <68 74-86-2 225 SSC/CB-SSC/CB-S-FKM
11/52
Acetylene Tetrabromide
100 <100 <212 79-27-6 255 TC/CB-CB/TC-A20-FKM
53,54 280 CB/TC-TC/CB-A20-FKM
53,54
Acrylic Acid
100 <37 <98 79-91-7 280 SSC/SSC-SSC/CB-S-FFKM
53,54
Acrylonitrile
100 <37 <98 107-13-1 280 TC/SSC-SSC/CB-S-FFKM
53,54
Adipic Acid
>5 <100 <212 124-04-9 180 SSC/SSC-HC-FKM
62
891 RSC/SSC-HC-FKM
62
Adipic Acid
<5 <100 <212 124-04-9 180 CB/SSC-HC-FKM
11,13 891 CB/RSC-HC-FKM
11,13
Aerozine;See Hydrazine
Alkazene
100 <20 <68
180 CB/SSC-S-FFKM
11,13 186 CB/SSC-S-TJ/FKM
11,13
Alkyd Resins
100 <100 <212
280 TC/SSC-SSC/TC-S-FKM
53,54
Alkylaryl Sulfonic Acid
100 <50 <122
255 SSC/CB-CB/SSC-S-EPDM
Alkylate,Heavy
100 >185 >365
186HT SSC/SSC-S-Graphite
62
Alkylate,Light
100 <100 <212
155 SSC/CB-S-FKM
11,13 891 CB/CR-S-FKM
11,13
Alkylbenzene Sulfonate
<20 <68 39406-18-3 255 TC/CB-CB/TC-S-FFKM
53,54 280 CB/TC-TC/CB-S-FFKM
53,54
Allyl Alcohol
100 <20 <68 107-18-6 180 CB/TC-S-EPDM
11,13
Allyl Chloride
100 <20 <68 107-05-1 255 SSC/CB-CB/SSC-A20-FFKM
53,54 280 CB/SSC-SSC/CB-A20-FFKM 53,54
Allylacetone
100 <50 <122 109-29-3 155 TC/CB-S-FKM
11,13 891 CB/TC-S-FKM
11,13
Allylamine
100 <120 <248 107-11-9 255 SSC/SSC-CB/SSC-HC-FFKM
53,54 280 SSC/SSC-SSC/CB-HC-FFKM 53,54
Alpha-Picoline
100 <120 <248 109-06-8 180 CB/TC-S-EPDM
11,13 891 CB/TC-S-EPDM
11,13
Alum;See Aluminum Potassium Sulfate
Aluminum Chlorate
<10 <100 <212 15477-33-5 255 SSC/SSC-CB/SSC-TI-FKM
53,54 280 SSC/SSC-SSC/CB-TI-FKM 53,54
Aluminum Chloride
<95 <100 <212 7446-70-0 280 CB/SSC-SSC/CB -HC/S-FKM
53,54
Aluminum Chloride
<10 <100 <212 7446-70-0 180 CB/SSC -HC/S-FKM
62
280 CB/SSC-SSC/CB -HC/S-FKM 53,54
Aluminum Hydroxide
<20 <60 <140 21645-51-2 180 SSC/SSC-A20-EPDM
62
891 SSC/SSC-A20-EPDM
62
Aluminum Nitrate
<10 <100 <212 13473-90-0 255 SSC/SSC-CB/SSC-S-FKM
53,54 280 SSC/SSC-SSC/CB-S-FKM 53,54
Aluminum Oxide
<10 <100 <212 1344-28-1 180 SSC/SSC-S-FKM
32
442 RSC/CB-S-FKM
32
Aluminum Potassium Sulfate
>5 >50 >50 10043-67-1 255 SSC/CB-CB/SSC-A20-FKM
53,54 280 CB/SSC-SSC/CB-A20-FKM 53,54
Aluminum Potassium Sulfate
<5 <50 <122 10043-67-1 180 CB/SSC-A20-EPDM
62
280 CB/SSC-SSC/CB-A20-EPDM 53,54
Aluminum Sodium Sulfate
>5 <20 <68 10102-71-3 180 SSC/SSC-S-FKM
62
280 SSC/SSC-SSC/CB-S-FKM 53,54
Aluminum Sulfate
<95 <60 <140 10043-01-3 255 SSC/CB-CB/SSC-S-FKM
53,54 280 CB/SSC-SSC/CB-S-FKM
53,54
Aluminum Sulfate
<15 <60 <140 10043-01-3 180 CB/SSC-S-FKM
62
280 CB/SSC-SSC/CB-S-FKM
53,54
Amines,Mixed
100 <50 <122
180 CB/TC-S-FFKM
11,13 891 CB/TC-S-FFKM
11,13
KEY - Page 3-2 NOTES - 1 - CRYSTALLIZING FLUID 2 - SLURRY OR ABRASIVE FLUID 3 - FLUID MAY SET UP OR HARDEN 4 - FLUID MAY FLASH 5 - NONLUBRICATING FLUID 6 - VHAP
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Materials of Construction
Performance Capabilites
Elastomers
Fluid
Properties
3-3
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A A
A
A
A
A
A
A A
A A
A
A
A
A
B
B
A
B
B
A
A
A
A
B
B
A
A A
A
A
A
A
A
A
A
A
A A
A A
A
A A
A
A
A A
B A
A A
B A
B A
A
A
A
A
A
A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A
A A A
A A
A A A
A A
A A A
A A A
A A A
A B A
A A
A A A
A
A B A
A A A
A A A
A
A
A
A
A A B
A
A
A
A A A
A A A
A A
A A A
A A A
A A A
A A B A A A A
A A A
A A A
A A A
A A
A A A
A A A
A
A
A
A B
A B B
A A A
B A
B A B
A A
A A A
A A
A A A
A
A
A
A
A
A
A
A
A
B
A
A A A
A A A
A A A
A A
A A A
B A
B B A
A A A
A A A
A A A
A A A
A B A
A A
A A B
B
B B
A B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
B A A A
B
A
A A A
A A
B
A
A B A A
B
A
A
A B A B
A
A A A B
A A A B
A A
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A A
A A A A
A A A A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
L
L
L
L
L
L
L
G
G
L
L
L
C
C
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
-73
17
81
C
C 2.47
C
C
C
C 3.99
C
C
C
C
C
L
0
13
-84
152
300
193
770
770
2980 2052
180
-88
-67
97 -129
45 -135
262
0.76 0.32 53
0.94 0.01 129
0.85 0.03
0.93 0.48
1.74
2.95 0.00 244

1.04 0.01 141
0.80 0.14 77
1.35
338
0.78 0.30 56 -95

0.78 0.12 82 -44
1.02 0.00 202
20
1.10 0.38 51 -113
0.97 0.02 140 -23
0.38 48.16 -84 -81
1.07 0.01 140
C 1.22
221
L
L
L
L 1.04 0.02 118
A A L
L
A A
A A L
A A L
A A L
A A L
A A L
A A L
A A L
A A L
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A
A A A A A A B A A B
A A
A A B A A A
A A A
A
B A A A
A A A A B A A B A A A
A
A A A A
A
A A
A A
A A A A A
B
A A
B A A B A A A
A A A
A A A
A
B
B
A
A
A
A
B
A
A
A
A
A A
A A
A
B
B
A
A
A
A
B
A
A
A
A
B
A
A
B
HAZARD
INFO
*
C
C
0.37 F,N,T
0.76 Xi,Xn
1.22 N,T,Xi
0.32 F,N,T+
*
*
*
*
*
0.85 Xn,C
Xn,C
Xn,C
F,Xi
0.31 F,Xi
0.34 F,T
1.64 Xn
0.37 C,F
0.77 Xn
F+
F+
7.46 T+,Xi
1.09 C
0.34 Ca,F,T,Xi
Xi
Xi
Ca,Xn
C
C
Xi
1.12 C
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
Mechanical Seal Recommendations by Fluid
NOTES
1
2
1,2
1
1,2
1
1
1
1
1,6
2,3
2,3
3
3
4
4
4,5
4,5
6
6

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Ammonia
100 <120 <248 7664-41-7 4400H SSC/CB-S-CR
32
280 SSC/TC-TC/SSC-S-CR
53,54
Ammonia (gas)
100 <100 <212 7664-41-7 4400H SSC/CB-S-EPDM
32
280 SSC/CB-CB/SSC-S-EPDM 53,54
Ammonia Brine;See Ammonium Chloride
Ammonium Acetate
>20 <37 <98 631-61-8 180 SSC/SSC-S-EPDM
13
891 SSC/SSC-S-EPDM
13
Ammonium Bicarbonate
<10 <20 <68 1066-33-7 180 CB/SSC-S-EPDM
62
280 CB/SSC-SSC/CB-S-EPDM 53,54
Ammonium Bisulfide;See Ammonium Sulfide
Ammonium Bromide
<40 <37 <98 12124-97-9 255 RSC/CB-CB/RSC-A20-EPDM
53,54 280 CB/SSC-SSC/CB-A20-EPDM 53,54
Ammonium Carbonate
<50 <100 <212 10361-29-2 180 SSC/SSC-S-EPDM
62
280 SSC/SSC-SSC/CB-S-EPDM 53,54
Ammonium Chloride
<30 <100 <212 12125-02-9 180 SSC/SSC-HC-FKM
62
280 SSC/SSC-SSC/CB-HC/S-FKM 53,54
Ammonium Fluoride
<20 <60 <140 12125-01-8 255 SSC/SSC-CB/SSC-HC-FKM
Ammonium Hydroxide
<40 <70 <158 1336-21-6 225 SSC/CB-SSC/CB-TI-EPDM
53,54
Ammonium Hydroxide
<10 <70 <158 1336-21-6 180 CB/SSC-S-EPDM
62
891 CB/SSC-S-EPDM
62
Ammonium Nitrate
>20 <100 <212 6484-52-2 280 SSC/SSC-SSC/CB-S-NBR
53,54
Ammonium Nitrate
<20 <100 <212 6484-52-2 180 SSC/SSC-S-NBR
62
280 SSC/SSC-SSC/CB-S-NBR
53,54
Ammonium Perchlorate
<10 <120 <248 7790-98-9 255 SSC/SSC-CB/SSC-TI-FFKM
53,54 280 SSC/SSC-SSC/CB-TI-FFKM 53,54
Ammonium Persulfate
<10 <50 <122 7727-54-0 155 SSC/SSC-S-EPDM
11,13
Ammonium Phospate
>40 <100 <212 7783-28-0 280 CB/SSC-SSC/CB-S-EPDM
53,54
Ammonium Phosphate
<40 <100 <212 7783-28-0 180 SSC/SSC-S-EPDM
62
Ammonium Sulfate
<70 <100 <212 7783-20-2 180 SSC/SSC-S-EPDM
62
Ammonium Sulfide
<SP <107 <224 12135-76-1 255 SSC/CB-CB/SSC-HC-EPDM
53,54 280 CB/SSC-SSC/CB-HC-EPDM 53,54
Ammonium Sulfite
<SP <100 <212 10196-04-0 180 SSC/SSC-HC-FKM
13
280 SSC/SSC-SSC/CB-HC-FKM 53,54
Ammonium Thiocyanate
<40 <80 <176 1762-95-4 180 SSC/SSC-S-EPDM
13
891 SSC/SSC-S-EPDM
13
Amyl Acetate
100 <100 <212 628-63-7 180 CB/TC-S-EPDM
11,13
Amyl Alcohol
100 <70 <158 71-41-0 155 TC/CB-S-EPDM
11,13
Amyl Chloride
100 <65 <149 543-59-9 255 SSC/CB-CB/SSC-S-FKM
53,54
Amyl Nitrate
100 <100 <212 1002-16-0 255 TC/CB-CB/TC-S-EPDM
Aniline
100 <100 <212 62-53-3 280 CB/SSC-SSC/CB-S-EPDM
53,54
Aniline Dyes
<100 <212
255 SSC/SSC-CB/SSC-S-EPDM
53,54 280 SSC/SSC-SSC/CB-S-EPDM 53,54
Aniline Hydrochloride
<SP <120 <248 142-04-1 280 CB/SSC-SSC/CB-TI/S-FFKM
53,54
Aqua Regia
<120 <248 8007-56-5 255 SSC/SSC-CB/SSC-TI-FFKM
Argon (gas)
100 <20 <68 7440-37-1 255 TC/CB-CB/TC-S-EPDM
Arochlor 1248
<37 <98 12672-29-6 180 CB/TC-S-FKM
11,13 442 CR/CB-S-FKM
11,13
Arsenic Acid
100 <20 <68 7778-39-4 255 SSC/SSC-CB/SSC-S-FKM
Arsenic Trichloride
Arsenic Trioxide
<40 <80 <176 1327-53-3 255 TC/CB-CB/TC-S-NBR
53,54 280 CB/SSC-SSC/CB-S-NBR
53,54
Water,Ash
100 <100 <212
180 TC/SSC-S-EPDM
32
442 CR/CB-S-EPDM
32
Asphalt Emulsion
100 <150 <302
186 TC/SSC-S-FKM
62
180 TC/TC-S-FKM
62
ASTM Oil No.1,2,3,4
100 <20 <68
180 TC/SSC-S-FKM
11
891 TC/RSC-S-FKM
11
ASTM Reference Fuel A,B,C
100 <65 <149
180 CB/TC-S-FKM
11
891 CB/CR-S-FKM
11
Bardol (TM)
100 <20 <68
180 TC/SSC-S-FKM
11,13 891 TC/RSC-S-FKM
32
Barium Chloride
<60 <100 <212 10361-37-2 280 CB/SSC-SSC/CB-S-FKM
53,54
Barium Hydroxide
<50 <100 <212 17194-00-2 255 TC/CB-CB/TC-S-FKM
53,54
Barium Nitrate
<50 <100 <212 10022-31-8 280 CB/SSC-SSC/CB-S-FKM
53,54
Barium Sulfide
<20 <65 <149 21109-95-5 180 CB/TC-TI-FKM
11,13 891 CB/TC-TI-FKM
11,13
Battery Acid;See Sulfuric Acid-36%
Beer
100 <37 <98
180 CB/TC-S-FKM
62
891 CB/TC-S-FKM
62
Beer Wort
100 <100 <212
180 CB/TC-S-FKM
13
891 CB/TC-S-FKM
26
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
3-4
B
B
B
B
B
A A A A A
A A A A A
A
B
A
A
B
A
A
B
A
B B
B B
B
B
B
A
A
B
B
B
B
B
B
B
B
B
A
A
A
A
A
B
A A A A
A
A A
A B B B
B B
A B A A
A
A
A A A A
A A
A
A A
A A
A A A A
A A B B
B B
A
B B B
B A B
B B B
B A
A A
B B B
B B B
A A B
A A B
B B B
A B
B B
B B B
B B B
B B
B B B
A B A
A A A
A A A
A A B
A
A
A A B
A A B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B A
A
B A
A
B A
B A
A
A
A
B A
B A
B A
B A
B A
A
B A
A A
A A
B A
A A
B A
A
A
A
A A
A A
A
A
A A
A A
A A
A A
A A
A A
B A
A A
A
A A
A
A
A
A
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A A
B B
B B
A
A
A
A
A
A
A
A
A
A A
A A
A A
A A
A A
A
A
A
A
A
A
A
A
A
A
A
A
B A A
A A
B
A A
A A
A
A
A
A
A A
A A
A
B A
A A
A
B A
B B
B B
B
A A
A B
A A
A
A
A
A
A
A
B B
B B
A
A
A
A
A A A A A A A A A B
A A A A A A A A A A
A
A
A
A A
A
A
A
A
A A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A
A
A A
A
A
A
B A
A
A
A A
A
A
A
A
A A
A A
B B A B
A
A
B B B
A A A
A
A A A A A A A
A A A A A A
A A A A A A
A A A A A
A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
C
L
C
L
L
L
C
C
C
C
C
C
C
C
L
L
C
C
C
C
C
C
C
C
C
C
L
L
L
L
L
L
C
L
G
A A L
A A L
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
A A C
278
-186 -189
-6
513
-79
1.02 0.00 184
170
-2
520
-71
-78
-99
2.87
339
114
-78
0.87 0.01 148

0.81 0.00 138
0.88 0.04 108
1.77
1.53
A A G 0.60 9.87 -33

A A G
HAZARD
INFO
*
*
Xn
T+,C,N
*
*
*
*
*
T,Xn
3.71 Ca,N,T, Xn
*
0.85 R10
3.48
0.55 F,Xn
O
O,Xn
Xi,Xn
T
C,N
N,Xi
0.13 C,N,T
C,N,T
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
2
1
1
1
2
2,3
1
1
1
1
1
1,2
1
1
1
1

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Sucrose
<SP <100 <212 57-50-1 180 TC/TC-S-FKM
62
53,54
Benzaldehyde
100 <100 <212 100-52-7 180 CB/TC-S-EPDM
11,13 891 CB/CR-S-EPDM
11,13
Benzene
100 <100 <212 71-43-2 255 TC/CB-CB/TC-A20-FFKM
53,54 280 CB/SSC-SSC/CB-A20-FFKM 53,54
Benzene Sulfonic Acid
<SP <15 <59 98-11-3 280 CB/SSC-SSC/CB-A20-FKM
53,54
Benzoic Acid
<70 <80 <176 65-85-0 180 CB/SSC-HC-FKM
2/62 280 CB/SSC-SSC/CB-HC-FKM 2/53
Benzophenone
<SP <100 <212 119-61-9 255 SSC/SSC-CB/SSC-S-FKM
Benzyl Alcohol
100 <60 <60 100-51-6 180 CB/SSC-S-FKM
11,13 442 RSC/CB-S-FKM
11,13
Benzyl Benzoate
100 <100 <212 120-51-4 255 SSC/CB-CB/SSC-S-FVMQ
53,54 280 CB/SSC-SSC/CB-S-FVMQ 53,54
Benzyl Chloride
100 <37 <98 100-44-7 255 SSC/CB-CB/SSC-A20-FKM
53,54 280 CB/SSC-SSC/CB-A20-FKM 53,54
Biphenyl
<SP <150 <302 92-52-4 255 TC/TC-TC/TC-S-FKM
53,54 280 TC/SSC-TC/CB-S-FKM
53,54
Bitumen
100 >120 >250
186HT TC/TC-S-Graphite
62
Black Liquor,Heavy
100 >100 >212
280 TC/SSC-SSC/CB-S-EPDM
53
255 TC/TC-CB/TC-S-EPDM
53
Black Liquor,Weak
100 <100 <212
180 TC/SSC-S-EPDM
62
280 TC/SSC-SSC/CB-S-EPDM 53,54
Bleach Lye;See Sodium Hypochlorite <10%
Blood,Animal
100 <20 <68
155 SSC/TC-S-FKM
13
442 CR/CB-S-FKM
13
Borax;See Sodium Borates
Boric Acid
<2 <75 <167 10043-35-3 155 TC/DC-S-EPDM
13
442 RSC/CB-S-EPDM
13
Boric Acid
<12 >75 >75 10043-35-3 280 TC/SSC-SSC/CB-S-EPDM
53,54
Brine;See Sodium Chloride
Bromic Acid
<100 <100 <212 7789-31-3 280 CB/SSC-SSC/CB-S-EPDM
53,54
Bromine
100 <37 <98 7726-95-6 180 CB/TC-HC-FKM
32
891 CB/TC-HC-FKM
32
Bromine (wet)
Bromine Trifluoride
100 <120 <248 7787-71-5 255 SSC/SSC-CB/SSC-M-FFKM
53,54 280 SSC/SSC-SSC/CB-M-FFKM 53,54
Bromobenzene
100 <120 <248 108-86-1 180 CB/SSC-A20-FKM
11,13 891 CB/RSC-A20-FKM
11,13
Bromomethane
100 <70 <158 74-83-9 4400H SSC/CB-S-FKM
32
280 SSC/CB-CB/SSC-S-FKM
53,54
Brown Stock;See Paper Stock
Bunker C Fuel Oil
100 >50 >50 68553-00-4 180 TC/SSC-S-FKM
2/62 280 TC/SSC-SSC/CB-S-FKM
2/53
Butadiene,1,3100 <100 <212 106-99-0 280 TC/SSC-SSC/CB-S-FKM
53,54
Butanal,1-;See Butyraldehyde
Butane,n- (gas)
100 <100 <212 106-97-8 4400H CB/SSC-S-FKM
32
Butane,n100 <100 <212 106-97-8 225 SSC/CB-SSC/CB-S-FKM
11/52 180 CB/SSC-S-FKM
11
Butanol,1-;See Butyl Alcohol,nButene,2100 <10 <50 107-01-7 225 SSC/CB-SSC/CB-S-FKM
53,54
Butyl Acetate,sec100 <100 <212 105-46-4 186 CB/SSC-S-TJ/FKM
62
Butyl Acetate,tert100 <90 <194 540-88-5 186 CB/SSC-S-TJ/FKM
62
Butyl Acetate,n100 <200 <392 123-86-4 186 CB/SSC-S-TJ/FKM
62
Butyl Acrylate,n100 <20 <68 141-32-2 255 TC/SSC-CB/TC-S-FFKM
53,54 280 SSC/SSC-SSC/CB-S-FFKM 53,54
Butyl Alcohol,sec100 <90 <194 78-92-2 180 CB/SSC-S-FKM
11,13
Butyl Alcohol,tert100 <80 <176 75-65-0 180 CB/SSC-S-FKM
11,13
Butyl Alcohol,n100 <100 <212 71-36-3 180 CB/SSC-S-FKM
11,13
Butyl Benzoate,n100 <20 <68 136-60-7 155 TC/CB-TI-FKM
11,13
Butyl Butyrate
100 <50 <122 109-21-7 180 CB/TC-S-FKM
32
442 RSC/CB-S-FKM
32
Butyl Cellosolve (TM)
100 <50 <122 111-76-2 255 TC/CB-CB/TC-S-FFKM
Butyl Cellosolve Acetate (TM)
100 <20 <68 111-15-9 255 TC/CB-CB/TC-S-FFKM
Butyl Ether
100 <20 <68 142-96-1 255 TC/CB-CB/TC-S-FFKM
Butyl Phthalate,n-;See Dibutyl Phthalate
Butyl Stearate
100 <37 <98 123-95-5 155 TC/CB-TI-FKM
11,13
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
B
B
A
B
A
B
B
A
A A
A
B
A
A
A B
A B
A
A
A
A
A A
A A
3-5
A
A
A
A
A
B
B
B
B
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A A
A
A
A A A A
A A A A
A A A A
A A
B B
A B B A
B B
A B B A
B B B
A B B A
B B B A A
A A
A A A
A
A A
A A A
A A A A
B B A
A
A A
A
A A
A A
A A
A A A
A A A A A A A
A
A
A
A
A
B
B
B
B
A
A
A
A
B A B
B A B
B A B
A
A
B
B
B
A A
A A
A A A A A A A
A A A A A A A
A
A
B A B
B A B
A
A
A A
A A A A A
A A
A A
A
A
A
A
A
A
A A A
A
A A A A A A A
A
A
A
A
A
A
A A A A A
A A A B B
A A
A A
B B
A
A A B A B
A A B B A
A
B A
B A
A A
A A
A A A
A
A
A
A
A A A
A A A A A A
A
A
A
A
A
A
A
A
A
A
A
B
A
A A
A
A
A
A
A
A
A
A
A
A
A
B
A
A A A A A A A A A A
A A A A A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A B
A A A A B
A
B
B
A
B
A
B
A
A A A
A
A A A
A
A A A A A
A
B
A A
B
B
A A B
B
B
A
B
A A
B
B
A
B
A
A A
A
A A
A A A
A
A
A A A A
A B B A
A B A
A
A A
A A A
A A A
A
A
A
B
B
B
A
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
L
L
C
C
C
L
L
L
C
L
L
L
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
G
L
L
L
L
L
L
L
L
L
L
L
L
A A L
A
A
A
A
A
A
A
A
A
A
A
A
0.03
0.05
0.02
0.01
0.02
0.87
0.90
0.97
0.76
0.00
0.00
0.00
0.01
0.81 0.01
0.87
0.86
0.88
0.89
0.81
A A G 0.57 2.40
A A G 0.57 2.40
-31
-94
122
48
-15
19
-39
69
-57
6
26
112 -99
96 -58
126 -74
147 -65
100 -115
82
26
118 -89
-22
165 -92
171 -74
156 -62
140 -95
-1 -138
-1 -138
-4 -109
L
L
L
-7
L
L 1.49 0.01 156
G 1.66 2.15
4
185
1.32
249
1.18
306
1.04 0.00 205
1.12 0.00 324
1.10 0.00 179
255
1.04 0.00 179

0.87 0.12 80
A A L
A A G 0.62 2.77
A
A
B
A
A
A A C
A A C
A A L
A
A
A
A
A
A
A
A
A
A
A
A
A
HAZARD
INFO
0.94
3.57
1.00
0.64
0.66
0.57
0.68
0.86
3.17
4.31
2.53
R10
Xi,Xn
T,Xn
Xi
F+
F
F
F
Xi
Xi
F,Xn
Xn,Xi
0.16 F+
0.16 F+
Ca,T
0.14 Ca,F+,T
1.07 Xi,N
T,Xn,Xi,N
T+,C,N
T+,C,N
5.14 Xn
8.84 Xn
1.12 Ca,T,Xn,Xi
Xi,N
*
*
*
1.38 Xn
0.60 Ca,F,T
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
5
5
4,5
2
3,4,6
1,2
1,2,3
6
3,6
2,3
3
3
5,6
1,2
1,2
1,2

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Butylamine,n100 <100 <212 109-73-9 255 TC/CB-CB/TC-S-FFKM

Butylene,alpha100 <60 <140 106-98-9 225 SSC/CB-SSC/CB-S-FFKM
53,54
Butyraldehyde
Butyric Acid,n100 <20 <68 107-92-6 255 SSC/CB-CB/SSC-HC-FFKM
53,54 280 CB/SSC-SSC/CB-HC-FFKM 53,54
Calcium Acetate
>30 <100 <212 62-54-4 255 SSC/CB-CB/SSC-TI-EPDM
53,54 280 CB/SSC-SSC/CB-TI-EPDM 53,54
Calcium Acetate
<30 <100 <212 62-54-4 180 CB/SSC-TI-EPDM
62
280 CB/SSC-SSC/CB-TI-EPDM 53,54
Calcium Bisulfide;See Calcium Hydrosulfide
Calcium Bisulfite;See Calcium Hydrogen Sulfite
Calcium Carbonate
<5 <120 <248 471-34-1 155 SSC/CB-S-FKM
13
442 RSC/CB-S-FKM
13
Calcium Carbonate
>5 <120 <248 471-34-1 180 SSC/SSC-S-FKM
13
891 RSC/SSC-S-FKM
13
Calcium Chlorate
<SP <60 <140 10137-74-3 280 SSC/SSC-SSC/CB-TI-FKM
53,54
Calcium Chloride
>20 <60 <140 10043-52-4 180 CB/SSC-TI-FKM
62
280 CB/SSC-SSC/CB-TI-FKM
53,54
Calcium Chloride
<20 <60 <140 10043-52-4 180 CB/SSC-TI-FKM
13
891 CB/CR-TI-FKM
13
Calcium Cyanide
<SP <20 <68 592-01-8 255 TC/CB-CB/TC-S-FKM
53,54
Calcium Hydrogen Sulfite
<90 <80 <176 13780-03-5 155 SSC/CB-S-FKM
11,13
Calcium Hydrosulfide
<50 <37 <98 12133-28-7 255 TC/CB-CB/TC-HC-FFKM
53,54 280 CB/SSC-SSC/CB-HC-FFKM 53,54
Calcium Hydroxide
>30 >80 >80 1305-62-0 280 SSC/SSC-SSC/CB-TI-FKM
53,54
Calcium Hydroxide
<30 <65 <149 1305-62-0 180 CB/SSC-TI-FKM
62
280 CB/SSC-SSC/CB-TI-FKM
53,54
Calcium Hypochlorite
>10 <100 <212 7778-54-3 280 SSC/SSC-SSC/CB-TI-EPDM
53,54
Calcium Hypochlorite
<10 <100 <212 7778-54-3 180 SSC/SSC -HC/S-EPDM
11,13 891 RSC/SSC-S-EPDM
11,13
Calcium Lignosulfonate
<SP <120 <248 8061-52-7 180 CB/SSC-S-FKM
32
442 CR/CB-S-FKM
32
Calcium Nitrate
<10 <100 <212 10124-37-5 180 SSC/SSC-S-FKM
62
Calcium Phosphate
<20 <100 <212 7758-23-8 180 SSC/CB-S-FKM
13
53,54
Calcium Sulfate
<10 <100 <212 7778-18-9 155 SSC/CB-S-FKM
13
442 RSC/CB-S-FKM
13
Calcium Sulfide
<10 <100 <212 20548-54-3 180 CB/SSC-A20-FKM
11,13 442 RSC/CB-A20-FKM
11,13
Calcium Sulfite
<SP <20 <68 10257-55-3 180 CB/SSC-S-FKM
32
442 CR/CB-S-FKM
32
Caprolactam
<100 >70 >70 105-60-2 280 TC/SSC-SSC/CB-S-FFKM
53,54
Carbitol Acetate (TM)
100 <20 <68 112-15-2 180 CB/SSC-S-FFKM
11,13
Carbon Dioxide (gas)
100 <100 <212 124-38-9 255 TC/CB-CB/TC-S-NBR
53,54
Carbon Dioxide
100 <20 <68 124-38-9 4400H SSC/CB-S-NBR
32
280 CB/SSC-SSC/CB-S-NBR
53,54
Carbon Disulfide
100 <40 <104 75-15-0 255 TC/CB-CB/TC-A20-FKM
53,54 280 CB/SSC-SSC/CB-A20-FKM 53,54
Carbon Monoxide (gas)
100 <100 <212 630-08-0 255 TC/CB-CB/TC-S-FKM
53,54
Tetrabromoethane,1,1,2,2100 <20 <68 79-27-6 255 TC/CB-CB/TC-S-FKM
53,54
Carbon Tetrachloride
100 <65 <149 56-23-5 280 SSC/SSC-SSC/CB-S-FKM
53,54
Carbon Tetrachloride (wet)
100 <65 <149 56-23-5 280 SSC/SSC-SSC/CB-M-FKM
53,54
Carbonic Acid
<30 <80 <176 463-79-6 155 SSC/CB-S-FKM
11,13 442 RSC/SSC-S-FFKM
11,13
Casein
<80 <176 9000-71-9 280 SSC/SSC-SSC/CB-TI-FKM
53,54
Castor Oil
100 <100 <212 8001-79-4 155 SSC/TC-S-FKM
11
891 TC/RSC-S-FKM
11
Caustic Potash;See Potassium Hydroxide
Caustic Soda;See Sodium Hydroxide
Cellutherm 2505A (TM)
100
180 TC/SSC-S-FKM
11,13
Chloral
100 <37 <98 75-87-6 255 TC/CB-CB/TC-S-FFKM
Chloric Acid
<20 <60 <140 7790-93-4 255 SSC/CB-CB/SSC-HC-FKM
53,54 280 CB/SSC-SSC/CB-HC-FKM 53,54
Chlorine
100 <30 <86 7782-50-5 280 CB/SSC-SSC/CB-HC-FFKM
53,54
Chlorine
<90 <60 <140 7782-50-5 280 SSC/SSC-SSC/CB-TI-FFKM
53,54
Chlorine Dioxide
100 <100 <212 10049-04-4 280 SSC/SSC-SSC/CB-TI-K2037
53,54
Chlorine Trifluoride
53,54
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
3-6
A
B
A
B
A
B
B
B
A
A
B
B
A
A
A
A B B A
B B A B
B A
A B
A A
A
A A
A
B
B A
A
B
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
B
A
A
A
A
A
A
A
A A A A A
A A A A A
A
A A A A
A
A A A B
A
A A A
A
A A A A
A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A B B
B A A
B A A
A A B
B A B
B A B
B
B
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A A
A A
A
A B
B B
A B
A A
A A
A A
A
A
A
A
A
A
A A A A A
A A A A A A
A A A A A
B
A
A A A
A A A
A B B
A A A
A B B
A A A
A A B
A B
A A
A A
A
A
A A
A A A
B A A A
B A A A
A
A A A
A
B B A
B
A A B
B
A A A
A A
*
A
A A
A A A
A
A
A A A A A
A
A A A
A A A
A
A A A
A
A
A
A A
A
A A
A
A A
B A A
A A A
B
B
B A
A
B A
A
A A B B
B B B B
B B
B
B
A
B B A A
A A A A
A A
B
B
A
B
A
B B
A
B
B B B A
A A A A
B B B B
B B B B
A B
B
B B A A
A A
A
A A
A A A A
A A A A
B B B B
A A A A
A
A
A
A
B
A
A
A
B
B A
A
A
A
A
A
B
B
A
A
A
A
B
B
A
A
A
B
B
B
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1450
772
1339
46 -112
-191 -205
2.95 0.00 244
0
1.58 0.15 77 -23
1.26 0.47
69
-25
-57
1108
0.12 77 -49
2.93 -6 -185
0.15 75 -96
0.00 163
-5
270
1.01 0.00 217
0.71 63.64
2.33
0.74
0.59
0.80
0.95
L
L 1.50 0.05 98 -57
L
G 1.40 7.70 -34 -101
G
G
-60
G
C
C
C
C
C
C
L
C
C
C
C
C
C
C
C
C
C
C
C
L
G
G
L
G
L
L
L
L
C
L
L
G
L
L
C
C
HAZARD
INFO
Xn,Xi
0.31 T,N,Xi
T,N,Xi
O,T+,C,N
1.04
0.35 F,T,Xi
F+,T
7.46 T+,Xi
0.91 Ca,T,N
Ca,T,N
2.60
0.06
Xi
O,Xn,C,N
O,Xn,C,N
Xi
Xi
T+
0.58 C,F,Xn
F+
0.42 F
1.48 C
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
4
6
6
6
4,5
1,2,3,6
1
1,2
1
1
1
2
2
1
2
2
1
1
1
1,2
1,2
1,2
4,5

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Chloroacetaldehyde
107-20-0 255 TC/CB-CB/TC-TI-FFKM
53,54 280 CB/SSC-SSC/CB-TI-FFKM 53,54
Chloroacetic Acid
<SP <60 <140 79-11-8 280 CB/SSC-SSC/CB-TI-FFKM
53,54
Chloroacetone
100 <20 <68 78-95-5 155 SSC/CB-S-EPDM
11,13
Chlorobenzene
100 <100 <212 108-89-7 255 SSC/CB-CB/SSC-A20-FKM
53,54 280 CB/SSC-SSC/CB-A20-FKM 53,54
Chlorobutadiene;See Chloroprene
Chloroform
100 <100 <212 67-66-3 255 TC/CB-CB/TC-TI-FKM
53,54 280 CB/SSC-SSC/CB-TI-FKM
53,54
Chloronaphthalene
<100 <20 <68 90-13-1 280 CB/SSC-SSC/CB-HC-FKM
53,54
Chloroprene
100 <100 <212 126-99-8 280 TC/SSC-SSC/CB-TI-FKM
53,54
Chlorosulphonic Acid
>20 <50 <122 7790-94-5 180 SSC/SSC -HC/S-FFKM
11,13 440 GFT/RSC-S-FFKM
11,13
Chlorotoluene,alpha-;See Benzyl Chloride
Chlorox (TM);See Sodium Hypochlorite 5%
Chocolate
100 >50 >50
180 TC/SSC-S-FKM
2/53
Chrome Alum;See Chromium Potassium Sulfate
Chromic Acid
<50 <100 <212 1333-82-0 280 SSC/SSC-SSC/CB-TI-FFKM
53,54
Chromic Hydroxide
<100 <20 <68 1308-14-1 280 SSC/SSC-SSC/CB-TI-FKM
53,54
Chromic Oxide
<50 <20 <68 1308-38-9 280 SSC/SSC-SSC/CB-S-FKM
53,54
Chromium Potassium Sulfate
<SP <100 <212 1014-00-1 155 TC/CB-S-FKM
32
442 CR/CB-S-FKM
32
Citric Acid
<50 <100 <212 77-92-9 180 CB/SSC-S-FKM
2/62 280 CB/SSC-SSC/CB-S-FKM
53,54
Coconut Oil
100 <100 <212 8001-31-8 180 SSC/SSC-S-FKM
2/62
Coke Oven Gas
100 <150 <302
225 SSC/CB-SSC/CB-S-FKM
53,54
Condensate
100 <80 <176 7732-18-5 155 TC/CB-S-EPDM
11,13
Copper Acetate
<20 <100 <212 142-71-2 280 SSC/SSC-SSC/CB-A20-EPDM 53,54
Copper Ammonium Acetate
<SP <100 <212
255 SSC/CB-CB/SSC-S-EPDM
Copper Chloride
<SP <100 <212 1344-67-8 280 CB/SSC-SSC/CB-TI-FKM
53,54
Copper Cyanide
<SP <100 <212 544-92-3 280 SSC/SSC-SSC/CB-A20-FKM
53,54
Copper Nitrate
<15 <100 <212 3251-23-8 180 SSC/SSC-S-FKM
62
Copper Sulfate
<35 <100 <212 7758-99-8 180 SSC/SSC-S-FKM
62
Corn Oil
100 <100 <212 8001-30-7 155 SSC/TC-S-FKM
11
891 TC/RSC-S-FKM
11
Cotton Seed Oil
100 <100 <212 8001-29-4 155 SSC/TC-S-FKM
11
891 TC/RSC-S-FKM
11
Creosote
100 <75 <167 8001-58-9 280 TC/SSC-SSC/CB-S-FKM
53,54
Cresol
100 <120 <248 1319-77-3 280 TC/SSC-SSC/TC-S-FKM
53,54
Cresylic Acid
100 <65 <149 1319-77-3 255 SSC/CB-CB/SSC-S-FKM
53,54
Crotonaldehyde
100 <100 <212 4170-30-3 255 TC/CB-CB/TC-HC-EPDM
Arsenic Acid
Crude Oil
100 >120 >120 8002-20-9 180 TC/SSC-S-FKM
62
280 TC/SSC-SSC/CB-S-FKM
53,54
Crude Oil + H2S
100 <120 <248
280 SSC/SSC-SSC/CB-S-FFKM
53,54
Cumene
100 <100 <212 98-82-8 255 SSC/CB-CB/SSC-S-FKM
53,54
Copper Chloride
>5 <37 <98 7447-39-4 280 SSC/SSC-SSC/CB-HC-FKM
53,54
Copper Sulfate
53,54
Cuprous Chloride
<SP <100 <212 7758-89-6 280 SSC/SSC-SSC/CB-HC-FKM
53,54
Cutting Oil
100 <65 <149
180 TC/SSC-S-FKM
13
891 RSC/RSC-S-FKM
13
Cyanogen
100 <100 <212 460-19-5 255 TC/CB-CB/TC-S-EPDM
Cyanogen Chloride
100 <20 <68 506-77-4 280 CB/SSC-SSC/CB-TI-FFKM
53,54
Cyclohexane
100 <60 <140 110-82-7 180 CB/TC-S-FKM
11,13
Cyclohexanone
100 <37 <98 108-94-1 255 TC/CB-CB/TC-S-FFKM
Cyclohexene
100 <37 <98 110-83-8 255 TC/CB-CB/TC-S-FKM
53,54
Cymene,para100 <100 <212 99-87-6 255 TC/CB-CB/TC-S-FKM
53,54
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
3-7
A
A
B
A
B
B
A
B
A
B
A
A
B
A
A
A
B
A
A
A
B
B
B
A
A
A
A
B
A
B A B
A A B
A A A
A
A A A
B B A
B B A
A A
B B B B
A
B B A
A A A A
A A A A
A B A B
A A A A
A B A
A A A A
B B B
A A
A
A
A A A A
A A
B B A
B B
A A A A
A A A A
B A
A B B A
B B B B
B B B B
A A A A
B
B
B
B
B
A
A
A
A
A
A
A
A A A
A
A A
A A
A A
A
A A
A A
A A
A A B
A A
A A
B A A
A A
A A
A A
A A
A A
A
A A
A A
A A
A A
A B
A A
A A
A A
A A
A A A
A A A
A A
A A
A A
A
A
A
B
A
B
A
A
B
A
A
A
B
A
B
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B B A
A A A
A A A
A A A
A
A
A A A B
A A A A
A
A A
A A A A
A
A
A
A
A
B
A
A
A
A A A A
A
B
B
A
A A A B
A A A A
A
A
A B
A A A
A
A
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
-45
43
60
C
C
C
C
C
L
G
L
C
C
C
C
C
C
L
L
L
L
L
L
C
L
L
L
C
C
C
L
G
G
L
L
L
L
0.87
1.17
0.77
0.94
0.81
0.85
200
-96
153
5.66 -21 -28

1.61 13
-7
0.13 81
7
0.01 156 -31
0.12 83 -103
0.00 177 -68
430
0.86 0.01 152

633
0.99 0.03 100
386
197
L 1.48 0.26 61 -64

C 1.17 0.00 259
-4
L 0.95 0.29 59 -130
L
-80
L 1.24
85
C
189
L
L 1.10 0.02 132
A A L
A A A A A A A A A A
A
A
A
A
A
A
A
A
A A A A A
A
A
A
A
A
A
A
A
B B A A A B A A A
A
B B A A A
A A A
B B
A A B A A A
A
A
A A
A A A A
B B B B
A A A A A A A A
B B A A B
A
B A A A A
B B
B B A
A A
A
A Q A
A A
A A A
B B B
B
B B B
B A A
HAZARD
INFO
T+,C,N
T,C,N
Ca,T
T,C
*
F,T,N
0.88 F,Xn,Xi,N
2.00 Xn
0.62
0.79
Xn,N
Xn,N
*
0.68 F,T,N
Ca,T
*
0.74 Xn,N
0.91
Ca,C,O,N,T
0.54 Ca,Xn,Xi
2.97
0.48 F,Xn,Xi
C
0.76 Xn,N
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
5
2
2
6
6
6
1
1
1
1,2
1,2
1
2,3
4
2,3
1,6

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
DDT
<100 <20 <68 50-29-3 255 TC/CB-CB/TC-S-FKM
53,54
De-Butanizer Reflux
180 CB/SSC-S-FKM
11,13
De-Ethanizer Charge
53,54
Decane,n100 <20 <68 124-18-5 155 SSC/CB-S-FKM
11,13 891 CB/RSC-S-FKM
11,13
Water,Deionized
100 >80 >176 7732-18-5 180 CB/SSC-S-EPDM
21
891 RSC/RSC-S-EPDM
21
Water,Deionized
100 >50 >122 7732-18-5 180 CB/SSC-S-EPDM
11,13 442 RSC/RSC-S-EPDM
11,13
Delco Brake Fluid (TM)
100 <20 <68
180 CB/TC-S-EPDM
11,13
Water,Demineralized
100 <80 <176 7732-18-5 155 TC/CB-S-FKM
11,13 442 CR/CB-S-FKM
11,13
Denatured Alcohol,(ethanol)
100 <20 <68 64-17-5 255 TC/CB-CB/TC-S-FKM
53,54
Detergent solutions
<15 <100 <212
180 CB/TC-S-FKM
11,13 442 CR/CB-S-FKM
11,13
Developing Fluids
100 <60 <140 7783-90-6 255 TC/CB-CB/TC-S-FKM
53,54
Dextron (TM)
100 <20 <68
180 TC/SSC-S-FKM
11,13
Dextrose,See Glucose
Diacetin
100 <20 <68 25395-31-7 180 CB/TC-S-EPDM
62
891 CB/CR-S-EPDM
62
Diacetone Alcohol
100 <70 <158 123-42-2 186 CB/SSC-S-TJ/FKM
62
280 CB/SSC-SSC/CB-S-FFKM 53,54
Diacetone;See Diacetone Alcohol
Diamine;See Hydrazine
Diaminoethane;See Ethylenediamine
Dibenzyl ether
100 <20 <68 103-50-4 280 CB/SSC-SSC/CB-S-FFKM
53,54
Dibutyl Cellusolve (TM)
100 <100 <212 112-48-1 255 TC/CB-CB/TC-S-EPDM
Dibutyl ether,n-;See Butyl Ether
Dibutyl phthalate
100 <100 <212 84-74-2 186 CB/SSC-S-TJ/FKM
62
Dibutylamine,n100 <50 <122 111-92-2 255 TC/CB-CB/TC-S-FFKM
53,54 280 CB/TC-TC/CB-S-FFKM
53,54
Dichlorobenzene,m100 <65 <149 541-73-1 180 CB/TC-TI-FKM
11,13 891 CB/CR-TI-FKM
11,13
Dichlorobenzene,o100 <65 <149 95-50-1 180 CB/TC-TI-FKM
11,13 891 CB/CR-TI-FKM
11,13
Dichlorobenzene,p<SP <65 <149 106-46-7 180 CB/TC-TI-FKM
62
891 CB/CR-TI-FKM
62
Dichlorobutane,1,1100 <20 <68 541-33-3 255 SSC/CB-CB/SSC-S-FKM
53,54
Dichloroethane,1,1-;See Ethylidene Chloride
Dichloroethane,1,2-;See Ethylene Dichloride
Dicyclohexylamine
100 <50 <122 101-83-7 180 CB/SSC-S-FFKM
11,13
Diesel Fuel
100 <100 <212 68334-30-5 155 TC/CB-S-FKM
11,13 891 CB/TC-S-FKM
11,13
Diesel Oil #2D,3D,4D,5D
100 <100 <212 68476-34-6 155 SSC/TC-S-FKM
11,13
Diester Lubricant
100 <100 <212
180 TC/SSC-S-FKM
11,13
Diethanolamine
<100 <50 <122 111-42-2 255 TC/CB-CB/TC-S-FFKM
Diethanolamine
<100 <120 <248 111-42-2 255 SSC/SSC-CB/SSC-S-FFKM
Diethyl Carbonate
100 <100 <212 105-58-8 255 TC/CB-CB/TC-S-FKM
53,54
Diethyl Ether;See Ether
Diethyl Maleate
100 <70 <158 141-05-9 155 SSC/CB-S-EPDM
11,13
Diethyl Sulfate
100 <100 <212 64-67-5 255 SSC/CB-CB/SSC-M-EPDM
53,54 280 SSC/SSC-SSC/CB-M-EPDM 53,54
Diethylamine
100 <75 <167 109-89-7 255 TC/CB-CB/TC-S-FFKM
Diethylene Glycol
100 <60 <140 111-46-6 255 TC/CB-CB/TC-S-FKM
53,54
Diethylenetriamine
100 <50 <122 111-40-0 255 TC/CB-CB/TC-S-FFKM
Dihydroxypropane,1,2-;See Propylene Glycol
Diisobutyl Ketone
100 <50 <122 108-83-8 255 TC/CB-CB/TC-S-FFKM
Diisobutylene
100 <60 <140 107-39-1 180 CB/SSC-S-FKM
32
53,54
Diisopropyl Ether
100 <60 <140 108-20-3 255 SSC/TC-TC/SSC-S-FFKM
53,54 280 TC/SSC-SSC/TC-S-FFKM
53,54
Diisopropyl Ketone
100 <20 <68 565-80-0 255 TC/CB-CB/TC-S-EPDM
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
A
A
A
A
3-8
A A A A
A
A
A A A A
A A A A
A A A A
A
A A A B
A A A A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A B A
A A A A
A A A A
A A
A A B
A A A
A
A
A
A
A
B
A
A A A
A A A
A
A A A
A
A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
B A A
A A A
A
A A A
A A A
A A A
A A A
A
A
A
B
A
B
B
A
B
A
A
A A
B
A
B
A
A
A
A
A
A
A
A
B
B
A A A A A
A
A
A
A A
A
A A
A
A
B
A
A
A
B B B
A A
A
A
A
A
A
A
A
A A A
A A A A A A
A
A
A A A
A A A
A A A
B
A
A A A
A A A
A A
A A
A
A A
A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A A A
A
A A A A
A A A A A
A A A A A
A A A A A
A
A A
A A A A
A A A A
A A A A A
A A A A A
A A A A A
A A A A A
A A A A A
A A A A A
B
A A
A B
A A A A A
A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A
A
A
A
A
A
A
A
A
B
B
B
B
B B B B B
A A A A A
A A
A A A
A A
A
A
A
B A
A
A B
A A A A
A A A A
B A A B
A A A
A A A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1.04
0.76
1.28
1.30
1.50
0.00
0.00
0.00
0.00
340
159
173
180
174
L
L
L
L
L
L
L
L
L
0.80
0.71
0.72
0.91
0.96
1.17
0.70
1.11
0.95
225
210
55
245
207
0.00 168
0.06 101
0.20 68
0.02 124
0.00
0.00
0.31
0.00
0.00
L 0.91 0.00 256

L
L
L
C
268
C
L 0.97 0.01 127
L
L
L
L
C
L
L
A A L 1.04 0.00 288

A A L
203
4.71
2.91 Xi
1.08 F
*
0.87
Ca,T,N
*
*
HAZARD
INFO
-46
-93
-86
-68
0.87
0.29
0.32
0.64
Xi
F,N
F
F,Xn
-9 2.91
-25
Ca,T,Xn,C
-50 0.32 F,C,Xn
-10 30.21
-39 4.46 C,Xn
6.32 C,N,Xn
Ca,Xn
Ca,Xn
*
28 553.04 Xn,Xi
Xn,Xi
-43 0.75
-35 16.66
-62 0.91 Xn
-25 1.04 Xn,N
-17 1.30 Xn,N,Xi
53
Xn,Xi
-44
L 0.73 0.00 174 -30

L
L
L
L
L 0.79 0.08 78 -114
L
L
L
A A L
259
A A L 0.93 0.00 168
A
A
A
A
A
A
A
A
A
A
A
A
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
6
6
6
4,5

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Diisopropylbenzene
100 <100 <212 25321-09-9 255 SSC/CB-CB/SSC-S-FKM
53,54
Dimethyl Acetamide
100 <100 <212 127-19-5 180 CB/TC-S-EPDM
11,13
Dimethyl Phthalate
100 <50 <122 131-11-3 186 CB/TC-S-TJ/FKM
62
180 CB/TC-S-FFKM
11,13
Dimethyl Sulfoxide
100 <50 <122 67-68-5 180 TC/SSC-S-FFKM
11,13 186 TC/SSC-S-TJ/FKM
11,13
Dimethyl Terephthalate
<SP <200 <392 120-61-6 186 CB/SSC-S-TJ/FKM
62
Dimethylaniline,N,N100 <50 <122 121-69-7 255 TC/CB-CB/TC-S-FFKM
Dimethylbenzene;See Xylene
Dimethylformamide, N,N100 <50 <122 68-12-2 255 TC/CB-CB/TC-S-FFKM
Dimethylhydrazine,1,1100 <70 <158 57-14-7 255 TC/CB-CB/TC-S-EPDM
Dimethylhydrazine,1,1100 <20 <68 57-14-7 255 TC/CB-CB/TC-S-EPDM
Dimethylketone;See Acetone
Dimethylmethane;See Propane
Dinitrotoluene,2,4<100 <50 <122 121-14-2 255 TC/CB-CB/TC-S-FFKM
Dioctyl Phthalate
100 <50 <122 117-84-0 186 CB/SSC-S-TJ/FKM
62
180 CB/TC-S-FFKM
11,13
Dioctylamine
100 <50 <122 106-20-7 255 TC/CB-CB/TC-S-FFKM
53,54
Dioxane,1,4100 <50 <122 123-91-1 255 TC/CB-CB/TC-S-FFKM
Dioxitol (TM)
100 <60 <140 111-90-0 280 TC/SSC-SSC/TC-S-FKM
53,54
Dipropylene Glycol
100 <20 <68 25265-71-8 280 TC/SSC-SSC/TC-S-FKM
53,54
Divinylbenzene
<55 <150 <302 1321-74-0 255 SSC/CB-CB/SSC-S-FKM
53,54
Dow Corning Silicone Fluid (TM)
100 <50 <122
180 CB/TC-S-FKM
11,13
Dowtherm A (TM)
100 >175 >175 8004-13-5 186HT TC/SSC-S-Graphite
62
Dowtherm 209 (TM)
100 <100 <212 107-98-2 186 TC/SSC-S-TJ/FKM
11,13 180 TC/SSC-S-EPDM
11,13
Dowtherm E (TM)
100 <150 <302
186 TC/SSC-S-TJ/FKM
62
180 TC/SSC-S-FKM
62
Dry Cleaning Fluids;SeeTetrachloroethylene
Dyes & Pigments
100 <20 <68
280 TC/SSC-SSC/CB-S-TFEP
53,54
Elco 28-Ep Lubricant (TM)
100 <20 <68
180 TC/SSC-S-FKM
11,13 891 RSC/TC-S-FKM
11,13
Epichlorohydrin
100 <50 <122 106-89-8 255 TC/CB-CB/TC-S-FFKM
Epsom Salt;See Magnesium Sulfate
Ethanamide;See Acetamide
Ethane (gas)
100 <60 <140 74-84-0 4400H SSC/CB-S-FKM
32
Ethane
100 <60 <140 74-84-0 225 SSC/CB-SSC/CB-S-FKM
11/52
Ethanoic Acid;See Acetic Acid
Ethanol;See Ethyl Alcohol
Ethanolamine
100 <100 <212 141-43-5 255 TC/CB-CB/TC-S-FFKM
Ether
100 <50 <122 60-29-7 186 CB/SSC-S-FFKM
62
180 CB/SSC-S-FFKM
62
Ethoxyethanol,2100 <50 <122 110-80-5 180 CB/SSC-S-FFKM
11,13
Ethyl Acetate
Ethyl Acetoacetate
Ethyl Acrylate
100 <20 <68 140-88-5 255 TC/TC-CB/TC-S-FFKM
53,54 280 TC/SSC-TC/CB-S-FFKM
53,54
Ethyl Alcohol
100 <100 <212 64-17-5 180 CB/TC-S-EPDM
11,13
Ethyl Benzene
100 <65 <149 100-41-4 180 CB/SSC-S-FKM
11,13
Ethyl Benzoate
100 <20 <68 93-89-0 155 TC/CB-S-FKM
32
442 CR/CB-S-FKM
32
Ethyl Chloride
100 <60 <140 75-00-3 4400H SSC/CB-S-FKM
32
Ethyl Formate
100 <20 <68 109-94-4 255 SSC/CB-CB/SSC-TI-FKM
53,54
Ethyl Mercaptan
100 <50 <122 75-08-1 255 TC/CB-CB/TC-M-FFKM
53,54 280 CB/SSC-SSC/CB-M-FFKM 53,54
Ethyl Silicate
100 <20 <68 78-10-4 180 SSC/SSC-S-FKM
32
442 RSC/RSC-S-FKM
32
Ethylcellulose
<SP <50 <122 9004-57-3 180 CB/SSC-S-FFKM
32
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
3-9
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A A A A A A
A
A A
A
A A A A
A
A A A A A A
A A A A
A
A A A A
A
A A A A
A
B B
B A A
A B B A
A
A A
A
A
A
A A A B
A A A A
A A A A
A A A A
A A A A
A A A
A A A
A A A A
A A A A
A A A A
A A A A
A A A A
B A A A
A A A A A
A A A
A A A A
A
A
A
A
A
A
A
A
A
A
B
B
A
B
B
B
B
A A A
A B B
A B
A B
A
A
A A A
A B
B
A A A
B B
A A A A A A A
A A A A A A A
A
A B B B
A A A A
A
A A A A
A
B B
A A
A
A
A
A
A
A
A
A
A
A A A A A
A A
A A
A A A A
A A A A
A A A A
A A A
A A A A
A A A A
A A
A A A A
A A A
A A A
A A A A A
A A A A A A A
A A A
A
A
A A A A
A A
A A
A
A
A
A
A
A A A A A
A A
A A A A A
A
A A
A
A A
A A
A A
A
A A
A A
A
A A
B
A B B
A
A A
A
A
A A A
A
A B
A A B
A
B
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A A A
A
A A A A
A A A A A A
A
A A A A
A
A A A A
A A A
A A A
A A A A A
A A
A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
L
L
C
L
0.93 0.00 166
1.19 0.00 284
1.09 0.00 191
288
0.95 0.00 194
A
A
A
A
A
A
A
A
A
A
C
317
L
L
L 1.03 0.05 101
L 0.98 0.00 202
L 1.02 0.00 232
L
L
L
L
L
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
L
L
L
L
L
L
L
G
L
L
L
C
1.01
0.71
0.93
0.89
1.02
0.92
0.79
0.86
1.04
0.89
0.92
0.83
0.00
0.71
0.01
0.12
0.00
0.05
0.08
0.01
0.00
1.58
0.32
0.69
170
34
135
77
181
100
78
136
213
12
54
35
HAZARD
INFO
T,Xn,N
0.81 T,Xn,Xi
F,T,C,N
F,T,C,N
-57
11 20.19 Xn,Xi
-116 0.23 F+,Xn
-59 1.92 T,Xn
-84 0.43 F,Xi
-39 1.53
-71 0.54 F,Xn,Xi
-114 1.08 F
-95 0.64 F,Xn
-35 1.98
-136 0.26 Ca,F+,Xn
-80 0.38 F,Xn,Xi
-148 0.29 F,Xn,N
Xn,Xi
0.04 F+
F+
*
*
1.07 Ca,T,C
*
*
12 1.19 Ca,F,Xn,Xi
-54 3.98
-40 83.57
70
-60
-20 0.91 Xn,Xi

-1 14.36
19 1.98
141
2 1.29 Ca,T,N
A A G 0.32 41.33 -89 -183

A A G
A A L
L
A A L 1.18 0.02 119
A
A
A
A
A
A
A
A
A
A
A A L 0.94 0.01 152

A A L
L
A
A
A
A
A
A
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
4,6
5,6
4,5
4,5
2,3
6
6
6
6
6
1,3

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Ethylene (gas)
100 <25 <77 74-85-1 4400H SSC/CB-S-NBR
32
Ethylene
100 <25 <77 74-85-1 225 SSC/CB-SSC/CB-S-NBR
11/52
Ethylene Bromide;See Ethylene Dibromide
Ethylene Chloride;See Ethylene Dichloride
Ethylene Chlorohydrin
100 <37 <98 107-07-3 255 TC/CB-CB/TC-S-FKM
53,54
Ethylene Cyanohydrin
100 <20 <68 109-78-4 255 TC/CB-CB/TC-TI-FKM
53,54
Ethylene Dibromide
100 <65 <149 106-93-4 255 TC/CB-CB/TC-S-FKM
53,54
Ethylene Dichloride
100 <50 <122 107-06-2 255 SSC/CB-CB/SSC-S-FKM
53,54
Ethylene Glycol
100 <37 <98 107-21-1 180 CB/TC-S-FKM
11,13
Ethylene Oxide
100 <37 <98 75-21-8 4400H SSC/CB-S-K2035
32
280 CB/SSC-SSC/CB-S-K2035 53,54
Ethylenediamine
100 <50 <122 107-15-3 255 TC/CB-CB/TC-S-FFKM
Ethylenediaminetetraacetic Acid
<SP <20 <68 60-00-4 255 TC/TC-CB/TC-S-FFKM
53,54 280 TC/SSC-TC/CB-S-FFKM
53,54
Ethylhexyl Alcohol
100 <120 <248 104-76-7 155 TC/CB-S-FKM
11,13
Ethylidene Chloride
100 <20 <68 75-34-3 180 CB/SSC-HC-FFKM
11,13 186 CB/SSC-HC-TJ/FKM
11,13
Fatty Acid
100 >100 >212
186 CB/SSC-S-TJ/FKM
2/62 180 CB/SSC-S-FFKM
62
Fatty Acid (tallow)
100 <100 <212
180 CB/SSC-S-FKM
2/53
Ferric Chloride
53,54
Ferric Hydroxide
<SP <65 <149 18624-44-7 180 CB/SSC-S-FKM
32
442 CR/CB-S-FKM
32
Ferric Nitrate
<50 <100 <212 10421-48-4 180 CB/SSC-S-FKM
32
442 RSC/RSC-S-FKM
32
Ferric Sulfate
<30 <100 <212 10028-22-5 180 SSC/SSC-A20-NBR
62
280 SSC/SSC-SSC/CB-A20-NBR 53,54
Ferrous Chloride
<50 <100 <212 7758-94-3 180 CB/SSC-HC-FKM
2/62 280 CB/SSC-SSC/CB-HC-FKM 2/53
Ferrous Sulfate
Ferrous Sulfide
<SP <20 <68 1317-37-9 155 TC/CB-S-FKM
32
442 CR/CB-S-FKM
32
Fluorine Gas (wet)
100 <37 <98 7782-41-4 225 SSC/CB-SSC/CB-M-FKM
53,54
Fluorolube (TM)
100 <20 <68 9002-83-9 155 SSC/TC-S-EPDM
11,13 891 TC/RSC-S-EPDM
11,13
Fluorosilicic Acid;See Hydrofluorosilicic Acid
Fluorosulfonic Acid
<50 >20 >20 7789-21-1 180 CB/SSC-A20-FFKM
11,13 891 CB/RSC-A20-FFKM
11,13
Formaldehyde
100 <100 <212 50-00-0 180 CB/SSC-S-K2035
11
280 CB/SSC-SSC/CB-S-K2035 53,54
Formic Acid
100 <100 <212 64-18-6 255 SSC/CB-CB/SSC-S-EPDM
Freon 11 (TM)
100 <100 <212 75-69-4 155 SSC/CB-A20-NBR
11,13 891 CB/RSC-A20-NBR
11,13
Freon 112 (TM)
<100 <30 <86 76-12-0 155 SSC/CB-A20-FKM
11,13 891 CB/RSC-A20-FKM
11,13
Freon 113 (TM) with refrigerant oil
100 <120 <248 76-13-1 155 TC/CB-A20-NBR
11,13 891 CB/TC-A20-NBR
11,13
100 <120 <248 76-14-2 155 SSC/CB-A20-NBR
11,13 891 CB/RSC-A20-NBR
11,13
Freon 12 (TM)
100 <120 <248 75-71-8 186 CB/SSC-S-FFKM
11,13 180 CB/SSC-S-FFKM
11,13
Freon 121(TM) with refrigerant oil
100 <120 <248
225 TC/CB-TC/CB-S-FFKM
53,54
Freon 134a
100 <107 <224
225 TC/CB-TC/CB-S-CR
53,54
100 <50 <122
225 TC/CB-TC/CB-A20-FFKM
53,54
Freon 502
100 <20 <68
225 TC/CB-TC/CB-S-EPDM
53,54
Fruit Juice
100 <120 <248
180 CB/SSC-S-FKM
11,13
Fuel Oil #1,2,3,4
100 >80 >80
180 TC/SSC-S-FKM
62
891 TC/RSC-S-FKM
62
Fuel Oil #1,2,3,4
100 <50 <122
155 SSC/TC-S-FKM
11,13
Fuel Oil #6,#5
100 >120 >248 68553-00-4 186HT TC/SSC-S-Graphite
62
Fumaric Acid
<10 <100 <212 110-17-8 180 CB/SSC-S-FKM
13
442 RSC/CB-S-FKM
13
Furfural
>15 <100 <212 98-01-1 255 SSC/CB-CB/SSC-S-FFKM
Furfuraldehyde;See Furfural
Furfuryl Alcohol
100 <50 <122 98-00-0 255 TC/CB-CB/TC-S-FFKM
Gas Oil,Heavy
100 >350 >350
186HT TC/SSC-S-Graphite
62
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A A
B B
B
B
A A
A A
A
B
B
A
A
A
3 - 10
A A
A A A A A A
B B A A A A B A A A
A A A
A A
A A A
A
A A A A A A
A A A
A A A A A A
A A A
A A A A A A
A A A
A A A A A A
A A A
A A A A A A
A A A
A A A A A A
A
A A A A
A A
A A A A A A
A
A A A A
A A A
A A A A A A
A A A
A A A A A A
A A A
A A A A A A
A A
A
A A A A
A
A A A
B B B
A A A A A A
B
A
A
B
A
B
A
A A A A
A
A
A
A
A
B
A B A B
B
B
B B
A
A
A
B
B
A
A
B B
A A A A A
A A A A A A
A A
A
A A
A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A A
A A
A
A
A
A
A
A
A
A
A
A A A
B
A A A
B
A A A A
A
A
A
A A A
A A A A
A A A A
A A A A
A A A A
A A A A
A A A A
A
A
A A
B A A A
A A A
A
A A A
A A A
A A A
A A
A A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
B
A
A
A
A
A
A A
A A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A
A
A A
A
A A
A
A
A A
A A
A
A A A A
A
A A
A
A
A
A
A
A
A
A
A
B A
A
A
A A A A B A
A A A A B A
B B
B
A
B B
B B
A
B A
A A
A A A A
B
A A
A A A A
A
A
A
B
B
A
A
A
A
A A
A A
B
A
A
B
B
A
A
A A
B
B
A
B
B
A
A
B
B
A
A
A
A
A
A
B
A
A
A A A A A
A A
A A
A A L 1.13 0.00 170

A A L
290
0.00 162
-15
289
-37
5.12 -19 -92

0.06 101
8
1.05 24 -111
93
26
0.44 48 -36
2.12
4 -93
6.43 -30 -158
-220
1024
677
304
319
2.90
2.99
F+
F+
HAZARD
INFO
4.82 Xn
*
*
*
*
*
*
*
*
Ca,T
Xi
1.58 Ca,T
0.66
0.35
0.22
C,Xn
Ca,T,C
1.61 C
0.43
T+,C
7.57
0.47 F,Xn,Xi
*
*
129 -68 2.99 T+

221 -46 0.70
131
10 1.60 Ca,T,N,Xi
83 -36 0.78 Ca,F,T,Xi
197 -13 17.22 Xn
10 -113
Ca,F+,T,Xi
117
11 1.71 C,Xn
-70
-97
0.01
0.00
0.02
0.10
0.00
1.73
0.02
-104 -169
0.83 0.00 185

1.17 0.30 57
1.20
1.04
2.16
1.25
1.11
0.87
0.90
A A L
A A G 0.73
A A L 1.22
L 1.48
B B C
B B L 1.56
B B G 1.46
A A G 1.31
A A G
G
A A G
G
A A L
A A L
A A L
A B L
A A C 1.64
A A L 1.15
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
L
L
L
G
L
C
L
L
L
L
C
C
C
C
C
C
C
B B G
A A L
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A G
A A G
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
2
4,5,6
1,2
1
1
1
1
1,6
6
6
4,5
4,5

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Gas Oil,Light
100 >250 >480
62
Gasoline
100 <50 <122 8006-61-9 180 CB/SSC-S-NBR
11
891 CB/RSC-S-NBR
11
Gelatin
100 <100 <212 9000-70-8 180 TC/SSC-S-FKM
62
891 TC/RSC-S-FKM
62
Glucose
<20 <100 <212 50-99-7 180 TC/TC-S-FKM
62
53,54
Glues
100 <100 <212
280 TC/TC-TC/CB-S-FKM
53,54
Glycerin
100 >30 >86 56-81-5 155 TC/CB-S-FKM
11,13 442 CR/CB-S-FKM
11,13
Glycerin
100 <30 <86 56-81-5 280 TC/SSC-SSC/TC-S-FKM
53,54
Glycol Ether;See Diethylene Glycol
Green Liquor
100 <100 <212
255 TC/CB-CB/TC-A20-EPDM
53,54 280 CB/SSC-SSC/CB-A20-EPDM 53,54
Guanidine Nitrate
<SP
506-93-4 255 SSC/CB-CB/SSC-S-FKM
53,54
Gypsum;See Calcium Sulfate
Heat Transfer Oils
100 >205 >400
62
Heat Transfer Oils
100 <175 <347
180 TC/SSC-S-FFKM
62
Helium
100 <100 <212 7440-59-7 4400H SSC/CB-S-NBR
32
53,54
Heptane,n100 <120 <248 142-82-5 186 CB/SSC-S-TJ/FKM
62
180 CB/SSC-S-NBR
11,13
Hexamethylenetetramine
<SP <50 <122 100-97-0 255 SSC/CB-CB/SSC-S-FFKM
Hexane,n100 <120 <248 110-54-3 255 SSC/CB-CB/SSC-S-NBR
53,54
Hexone;See Methyl Isobutyl Ketone
Hexyl Alcohol
100 <100 <212 111-27-3 180 CB/SSC-S-FKM
11,13
Water,Hot
100 <100 <212 7732-18-5 155 TC/CB-S-EPDM
11
442 RSC/CB-S-EPDM
11
Hydraulic Oil (petroleum based)
100 <20 <68
180 TC/SSC-S-FKM
11
891 TC/RSC-S-FKM
11
Hydrazine
100 <100 <212 302-01-2 255 SSC/CB-CB/SSC-S-EPDM
Hydro-Lube (water/glycol base)
100 <100 <212
180 TC/SSC-S-FKM
11,13
Hydrobromic Acid
100 <65 <149 10035-10-6 280 SSC/SSC-SSC/CB-HC-FKM
53,54
Hydrobromic Acid
<30 <65 <149 10035-10-6 280 SSC/SSC-SSC/CB-HB-FFKM
53,54
Hydrocarbon Fraction C5/C6
100 <200 <392
62
Hydrochloric Acid
>30 >38 >38 7647-01-0 280 CB/SSC-SSC/CB-HB-LD-Viton 53,54
Hydrochloric Acid
53,54
Hydrofluoric Acid (aerated)
>40 <100 <212 7664-39-3 280 SSC/SSC-SSC/SSC-HC-LD-Viton 53,54
Hydrofluoric Acid
<80 <65 <149 7664-39-3 280 SSC/SSC-SSC/SSC-M-LD-Viton 53,54
Hydrofluorosilicic Acid
>30 <100 <212 16961-83-4 255 SSC/CB-CB/SSC-HC-FKM
Hydrofluorosilicic Acid
<30 <20 <68 16961-83-4 255 SSC/CB-CB/SSC-S-FKM
53,54
Hydrogen (gas)
100 <60 <140 1333-74-0 4400H SSC/CB-S-EPDM
32
Hydrogen Chloride (gas)
100 <20 <68 7647-01-0 4400H SSC/CB-S-FFKM
32
Hydrogen Cyanide
100 <50 <122 74-90-8 255 SSC/CB-CB/SSC-A20-FKM
53,54 280 CB/SSC-SSC/CB-A20-FKM 53,54
Hydrogen Cyanide
100 <20 <68 74-90-8 255 SSC/CB-CB/SSC-S-FKM
53,54
Hydrogen Fluoride
100 <65 <149 7664-39-3 280 CB/SSC-SSC/CB-M-EPDM
53,54
Hydrogen Peroxide
<80 <37 <98 7722-84-1 280 SSC/SSC-SSC/CB-S-FFKM
53,54
Hydrogen Peroxide
<30 <37 <98 7722-84-1 180 SSC/SSC-S-FKM
11,13 891 SSC/SSC-S-FKM
11,13
Hydrogen Sulfide
100 <65 <149 7783-06-4 4400H SSC/CB-S-EPDM
32
Hydroquinone,p<100 <100 <212 123-31-9 255 TC/CB-CB/TC-S-FFKM
Hydroxyacetic Acid
<70 <100 <212 79-14-1 180 CB/SSC-S-EPDM
32
442 RSC/CB-S-EPDM
32
Hydyne
100 <20 <68
255 TC/CB-CB/TC-S-FFKM
Hypochlorous Acid
100 <20 <68 7790-92-3 255 SSC/CB-CB/SSC-HC-FKM
Indole
<100 <20 <68 120-72-9 280 TC/SSC-SSC/CB-S-FFKM
53,54
Ink
100 <20 <68
180 TC/SSC-S-FKM
11,13
Insecticide
100 <20 <68 16752-77-5 255 SSC/TC-TC/SSC-S-FFKM
53,54
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
A
A
A
A
A
A A A
A A A
A A A
A
A
A A
A A A
3 - 11
A
A
A
A
A
A
B
A
A
B
B
A
A
B
A A A
A A A A
A A A A
A A A A
A A A
A A A A
A A A A
A
A
B
B A A
B A A B
B B A
B
A
A A A A
A
A A B
A A A A
A B B B
A B A A
A A A A
B
A
B A A A
A A A B A
A A A A B
B B B B
A
A
A A
A
A A A A A
A A A A
A A A A
A
A A A A
A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
A
A
A
B
A
A
A
A
A
A
A
A
A A
A B A A
A A A A
A A
A
A A
A A
A
A A
A
A
A A
A A
A
A A
A
A
A
A
A
A
B A
A
B A
A
A
A A A A
A A
A
A A A A
A
A
A
A
A
A
A B
A
A
A A
A A
A
A A A
A A
A
A A
A A A A
A
A A
A
A
A
A
A
A
A
A
A
A
A
A A A A
A
A B
A
A
A
A B
A B A B B
A B B
A A B
A A A A A A
A A
A A
A A
A
B
B B
B B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A B
A A B B B
A A B
B
A
A A B
A A
A B
A
A B B
A A A
A A A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A B A A B B B A B B
A A
A A A A
A
A
A
A
A
A
A
A
A
A A A A
A
A
A A A A
A
A
A A A A
A A A
A A A A
A A
A A A A
A A A
A A
A
A
A
A
A
A
A
A
A
A
A
A
B B B B B
A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
C
C 1.54
L
L 1.25 0.00 288
L
A
A
A
A
A
A
A
A
A
A
A
A
B
B
A
A
A
A
B
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
B
B
A
A
A
A
B
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
L
L
L
L
L
L
L
L
L
L
L
L
L
L
G
G
L
L
G
L
L
G
C
C
L
L
C
L
1.18
253
0.78 19.91 -60

285
1.49
170
53
-85
172
-68
0.12
1.14
-83
0
0.94 1.21 20
1.44 0.00 150
-83
0.08
0.18
20
0.08
0.93
*
T+,N
*
T,C,N
*
C
C
*
T,C
T,C
T+,C
T+,C
C
C
F+
T,C
T+,N
T+,N
T+,C
O,C
O,C
F+,T+,N
Xn,Xi,N
4.53 Xn
-253 -259
0.80 46.60 -85 -114
0.68 0.98 26 -13
0.94 1.21
0.80 46.60 -85 -114
-87
1.00 0.02 114

1.75 24.28 -67
-45
0.82 0.00 157
*
*
*
Ca,T,Xn
HAZARD
INFO
0.38 F,Xn,Xi,N
F,Xn
0.30 F,Xn,Xi,N
18 923.50
146
L
L
G
-269 -271
L 0.68 0.06 98 -91
C
L 0.66 0.20 69 -95
A A L
C
A
A
A
A
A
A
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
6
1,2
6
6
6
6
4
4
4,5
4,5
4,5
1,2
2,3
1,2,3
3

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Iodine
>10 >20 >20 7553-56-2 280 SSC/SSC-SSC/CB-HC-FKM
53,54
Iodine
<100 <20 <68 7553-56-2 280 SSC/SSC-SSC/CB-A20-FKM
53,54
Iodine Pentafluoride
53,54
Iodoform
Iron Acetate
<SP <50 <122 10450-55-2 255 TC/CB-CB/TC-S-FFKM
Iron Chloride;See Ferric Chloride
Iron Dichloride;See Ferric Chloride
Iron Hydroxide
<20 <68 18624-44-7 180 TC/SSC-S-FKM
62
891 TC/SSC-S-FKM
62
Iron Nitrate;See Ferric Nitrate
Iron Oxide
1309-37-1 280 SSC/SSC-SSC/CB-TI-FKM
53,54
Iron Protochloride;See Ferrous Chloride
Iron Sulfate;See Ferrous Sulfate
Iron Sulfide;See Ferrous Sulfide
Isoamyl Acetate
100 <70 <158 123-92-2 155 TC/CB-S-EPDM
32
442 CR/CB-S-EPDM
32
Isoamyl Alcohol
100 <70 <158 123-51-3 155 TC/CB-S-FKM
11,13
Isoamyl Butyrate
100 <100 <212 106-27-4 255 TC/CB-CB/TC-S-FFKM
Isoamyl Chloride
100 <20 <68 107-84-6 155 SSC/CB-TI-FKM
11,13 891 CB/RSC-TI-FKM
11,13
Isobutane (gas)
100 <120 <248 75-28-5 4400H CB/SSC-S-NBR
32
53,54
Isobutane
100 <120 <248 75-28-5 225 SSC/CB-SSC/CB-S-NBR
11/52 180 CB/SSC-S-NBR
11
Isobutene
100 <120 <248 115-11-7 225 SSC/CB-SSC/CB-S-NBR
53,54 180 CB/SSC-S-NBR
11
Isobutyl Alcohol
100 <20 <68 78-83-1 255 TC/CB-CB/TC-S-FKM
53,54
Isobutylamine
100 <50 <122 78-81-9 255 TC/CB-CB/TC-S-FFKM
Isobutylene;See Isobutene
Isodecane;See 2-Methylnonane
Isooctane
100 <20 <68 540-84-1 255 SSC/CB-CB/SSC-S-FKM
53,54
Isopentane
100 <120 <248 78-78-4 255 SSC/CB-CB/SSC-S-NBR
53,54
Isophorone
100 <20 <68 78-59-1 180 TC/SSC-S-EPDM
11,13
Isopropanol
100 <75 <167 67-63-0 180 CB/TC-S-FKM
11,13 442 CR/CB-S-FKM
11,13
Isopropyl Acetate
100 <50 <122 108-21-4 186 TC/SSC-S-TJ/FKM
62
Isopropyl Alcohol;See Isopropanol
Isopropyl Chloride
100 <70 <158 75-29-6 255 SSC/TC-TC/SSC-S-FKM
53,54 280 TC/SSC-SSC/TC-S-FKM
53,54
Isopropylamine
100 <50 <122 75-31-0 255 TC/CB-CB/TC-S-FFKM
Jet Fuels
100 <20 <68 94114-58-6 180 CB/SSC-S-NBR
11,13
Kaolin
<30 <70 <158 1332-58-7 280 TC/TC-TC/CB-S-FKM
53,54 180 TC/TC-S-FKM
32
Kerosene
100 <70 <158 8008-20-6 180 CB/TC-S-FKM
11,13
Ketchup
100 <20 <68
180 SSC/SSC-S-FKM
62
891 CB/CR-S-FKM
62
Kraft Liquor;See White Liquor
Lactic Acid
<10 <100 <212 598-82-3 180 CB/SSC-A20-FKM
2/62 280 CB/SSC-SSC/CB-A20-FKM 53,54
Latex
100 <37 <98
53,54
Latex Paint
100 <37 <98
53,54
Lavender Oil
100 <20 <68 8000-28-0 155 SSC/TC-HC-FKM
11,13 891 TC/RSC-HC-FKM
11,13
Lead Acetate
<SP <100 <212 301-04-2 255 SSC/CB-CB/SSC-S-EPDM
Lead Nitrate
Lead Sulfide
Lime Milk;See Calcium Hydroxide
Limestone;See Calcium Carbonate
Lindol
100 <120 <248 1330-78-5 255 TC/CB-CB/TC-HC-EPDM
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
A
A
A
A
B
A
B
B
A
A
B
B
B
B
A
A
A
A
A
A
3 - 12
A
A
B
A
B
B
B
A
A
B
B
B
A
A
A
A
A
A
A
A
A
A
A
B B A A B
A A B
B B B
B B B
A A
B B
A A
B A A
A
A
A A B
A
B B B
B B B
A
A
A
A
A
A A A
A A A
A A
A A A
A A A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
B A
B
B B
A A
A
A
A
A
A
A
A A A A
A A A
A A B
B A
A
A
A
A A A
A A
A A B A A A
A A
A
A A A A
A A A A
A A
A A A A
A
A
A A
A
A
A
A
A
A A
A
A A A A
A A
A B
A A
A
A
A
A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A
A A A A A A
A
A A A A
A A A A A A
A A A A A A
A
A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A A A A
A A A A
A A A B
A A
A B A B B
A B A B B
A A A
A
A
A
A A A A
A A A A
A
A
A
A A A A
A
A A A A
A
A
A A
A A A A B A
A
A A A A
A
A A A A
A
A A A A
A
A A A A
A
A
A
A
A
B
A
A
A
A
B
A
A
A
B
A
A
A
A
B
A
A
B
A
A
A
A
A
B
A
A
A
B B
B B B
A
B A A A A
A A
A B B B
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
114
A A L
1594
0.69
0.62
0.92
0.78
0.87
Xn,N
Xn,N
F,Xn,Xi,N
F+,Xn,N
Xn,Xi
F,Xi
F,Xi
HAZARD
INFO
Xn,N
*
*
Xn
*
0.31 F,Xn
0.33 F+,Xi
0.48
0.21
2.33
2.06
0.54
0.17 F+
F+
F+
3.33 Xi
0.55
0.80 F
3.71
17 42.02
36 -117
32 -95
0.07 99 -107
0.91 28 -160
0.00 215
-8
0.06 82 -88
0.08 89 -73
0.59 3.00 -7 -140

0.80 0.01 108 -108
0.73 0.18 68 -85
0.55 3.47 -12 -160
0.87 0.01 142 -79

0.81 0.00 131 -117
L 0.86 0.68
L 0.69 0.77
L
C
L
L
L
L
L
L
L
L
L
L
L
G
G
G
L
L
C
C
L
C
C
A A C 1.23 0.00 217

A A L
L
A A L
A A C
A A C
A A C
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A
A
A
B
A
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
3
3
4,5
6
4,5
4,5
5
5
1,4
5

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Linoleic Acid
100 <70 <158 60-33-3 180 CB/SSC-S-FFKM
11,13
Linseed Oil
53,54
Liquid Petroleum Gas (LPG)
100 <60 <140 68476-85-7 180 CB/SSC-S-FKM
11
53,54
Lithium Bromide
<SP <20 <68 7550-35-8 155 TC/CB-S-FKM
32
442 RSC/CB-S-FKM
32
Lithium Chloride
>40 <120 <248 7447-41-8 280 CB/SSC-SSC/CB-HC-FKM
53,54
Lithium Hydroxide
<SP <100 <212 1310-65-2 255 SSC/TC-CB/SSC-S-EPDM
53,54 280 TC/SSC-SSC/CB-S-EPDM 53,54
Lube Oils (petroleum based)
100 <80 <176
180 TC/SSC-S-FKM
11,13
Lye;See Potassium Hydroxide
Magnesium Chloride
<50 <100 <212 7786-30-3 180 TC/SSC-HC-FKM
62
280 TC/SSC-SSC/CB-HC-FKM 53,54
Magnesium Dioxide
<50 <70 <158 1335-26-8 255 SSC/SSC-SSC/SSC-S-EPDM
53,54 280 SSC/SSC-SSC/SSC-S-EPDM 53,54
Magnesium Hydroxide
>20 <100 <212 1309-42-8 255 TC/CB-CB/TC-S-FKM
53,54
Magnesium Nitrate
<SP <100 <212 10377-60-3 255 SSC/CB-CB/SSC-HC-FKM
Magnesium Sulfate
>45 <100 <212 7487-88-9 280 CB/SSC-SSC/CB-S-FKM
53,54
Magnesium Sulfate
<45 <100 <212 7487-88-9 180 CB/SSC-S-FKM
62
53,54
Magnesium Sulfite
<SP <20 <68 7757-88-2 255 TC/CB-CB/TC-S-FKM
53,54
Maleic Acid
>15 <65 <149 110-16-7 280 CB/SSC-SSC/CB-TI-FKM
53,54
Maleic Acid
<15 <65 <149 110-16-7 180 CB/SSC-HC-FKM
62
280 CB/SSC-SSC/CB-HC-FKM 53,54
Maleic Anhydride
<SP <175 <347 108-31-6 280 CB/SSC-SSC/CB-S-FFKM
53,54
Malic Acid
<50 <100 <212 6915-15-7 180 SSC/SSC-S-FKM
62
53,54
Manganese Sulfate
<SP <100 <212 7785-87-7 180 CB/SSC-S-FKM
62
53,54
Mannitol
<SP <100 <212 69-65-8 180 CB/TC-S-FKM
62
280 CB/TC-TC/CB-S-FKM
53,54
Mercaptans;See Thiols
Mercuric Chloride
<SP <60 <140 7487-94-7 255 SSC/CB-CB/SSC-TI-FKM
53,54
Mercury
100 <60 <140 7439-97-6 280 CB/SSC-SSC/CB-S-FKM
53,54
Mercury Chloride;See Mercuric Chloride
Mesityl Oxide
100 <100 <212 141-79-7 186 TC/SSC-S-TJ/FKM
62
Methane
100 <80 <176 74-82-8 225 SSC/CB-SSC/CB-S-FKM
11/52
Methanol;See Methyl Alcohol
Methyl Acetate
100 <65 <149 79-20-9 186 TC/SSC-S-TJ/FKM
62
Methyl Acrylate
53,54
Methyl Alcohol
100 <100 <212 67-56-1 180 CB/SSC-S-EPDM
11,13 891 CB/RSC-S-EPDM
11,13
Methyl Butyl Ketone
100 <60 <140 591-78-6 255 SSC/TC-TC/SSC-S-EPDM
53,54 280 TC/SSC-SSC/TC-S-EPDM
53,54
Methyl Cellosolve (TM)
100 <50 <122 109-86-4 255 TC/CB-CB/TC-S-FFKM
Methyl Chloride
100 <37 <98 74-87-3 225 SSC/CB-SSC/CB-S-FFKM
53,54 4400H SSC/CB-S-FFKM
32
Methyl Cyanide;See Acetonitrile
Methyl Dioxitol;See Diethylene Glycol Monomethyl Ether
Methyl Ether
100 <20 <68 115-10-6 4400H SSC/CB-S-FKM
32
225 SSC/CB-SSC/CB-S-FKM
52
Methyl Ethyl Ketone
100 <100 <212 78-93-3 186 CB/SSC-S-TJ/FKM
62
255 SSC/CB-CB/SSC-S-FFKM 53,54
Methyl Formate
100 <50 <122 107-31-3 186 CB/SSC-S-TJ/FKM
62
180 CB/SSC-S-EPDM
62
Methyl Isobutyl Carbinol
100 <20 <68 108-11-2 180 CB/SSC-S-FKM
11,13
Methyl Isobutyl Ketone
100 <65 <149 108-10-1 186 CB/SSC-S-TJ/FKM
62
180 CB/SSC-S-FFKM
62
Methyl Isopropyl Ketone
Methyl Methacrylate
53,54 186 SSC/SSC-S-TJ/FKM
62
Methyl Oleate
100 <20 <68 112-62-9 155 SSC/TC-S-FKM
11,13
Methyl Salicylate
53,54
Methyl Tert Butyl Ether
100 <100 <212 1634-04-4 186 CB/SSC-S-TJ/FKM
62
180 CB/SSC-S-FFKM
62
Methylaniline,n100 <20 <68 100-61-8 255 SSC/TC-TC/SSC-S-FFKM
53,54
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
3 - 13
B
B
B
A
B
B
A
A
A
B
B
B
A
B
B
A
A
A
A
A
A A
A A A
A A B
A
A
A
A
A B B A A A A
A B B A A A A
A
A
A
A
A
A
A
A
A A A
A
A
A
A A A
A A A
A A A
A A
A
A
A
A
A A
A
A
A
A A A
A A A
A A A A B A A A
A
A A A
A
A A
A A A
A B A B A A A B
A
A
A
A
A
A
A
B B B
B B B
B
A
B B B
B B B
A
A
A
A
A
A A
A B
A A A
A
A
B
A
A
A
A
A
A
B
B
A
A B
A
A
A A A
A A A A
B A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A B A
A
B
B
A B
B B
A B
B
A A A
B
B
B
A A A A
A
A
A
A
A
A A
A
A A A A
B
A A A A A A A
A B
A
A
A
A
A
A
A A A A A
A A A A A
B
B
A A A
A A B A B
A
A
A
A
A
A
B
A
A A A
A
A A A
A A A
A A A
A A A
A A A
A A A
A A A
A A
A A A
A A A
A A A
A
B A A
A A A A A
A A A A A
A
A A A
A A
A A
A A A B
A A A A A
A A A A
A
A A B
A A A A
B A B
A A
A
A B A
A A A A
A B A
A A A A
A
A A
B B B B
A A B A
B B A B A A A B A
A A A A
A A A A
A B B B
A A A A
A A A B
A A B A
A A A A
A A A A
B
A
A
B
B
B
B
A
A
B
B
B
A
B
B
A
A
A
A
A A B
B B B B
A A A B
A A A A
A
B
A
B B B B
A B A A
B
A
A
A
B
B
A
53
202
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
G
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
G
0.65
0.80
0.97
0.80
0.80
0.81
0.94
0.87
1.17
0.74
0.98
0.93
0.95
0.79
0.81
0.96
0.91
5.85
0.12
0.77
0.01
0.03
0.07
0.05
0.00
0.00
0.33
0.00
-98
-77
-98
-56
-85
-98
-25 -141
80 -87
32 -99
132
117 -84
94 -92
100 -48
344
20
221
-8
55 -109
196 -57
0.28 57
0.11 80
0.17 65
0.01 128
0.01 124
5.66 -24
A A L 0.85 0.01 130 -53

A A G
-161 -182
-39
130
Xn,N
Xn,Xi
Xn,Xi
C
F+,T
HAZARD
INFO
0.40
0.33
4.12
0.54
0.43
0.54
5.84
2.41
0.33
2.00
0.36
0.46
0.54
0.58
1.65
0.17
T,N
F+
F,Xi
F+,Xn,Xi
Xi
F,Xn,Xi
F
F,Xi
F,Xi
F,Xn
F,T
T
T,Xn
Ca,F+,Xn
0.60 Xn
F+
T+,C,N
1.53 T,N
-5 19.54
292
90
1127
L 0.90 0.00 355

L
G
C
C
C
L
A A C
A A L 13.48 0.00 357
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
C
C
C
C
C
C
C
C
C
C
A A C
A A C
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
6
3,6
5,6
3
6
4,5
1
1
1,6
1
1
2
1
1
1
1
3
4

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Methylcyclopentane
100 <20 <68 96-37-7 4400H SSC/CB-S-FFKM
32
280 TC/SSC-SSC/TC-S-FFKM
53,54
Methylene Chloride
100 <100 <212 75-09-2 225 SSC/CB-SSC/CB-S-FVMQ
53,54
Methylnonane,2100 <70 <158 871-83-0 155 SSC/CB-HC-FKM
11,13 891 CB/RSC-HC-FKM
11,13
Milk Of Lime;See Calcium Hydroxide
Mineral Oil
100 <50 <122 8012-95-1 155 SSC/TC-S-FKM
11,13 180 TC/SSC-S-FKM
11,13
Mineral Spirits
100 <50 <122 8052-41-3 180 CB/SSC-S-FKM
11,13
Molasses
100 <60 <140 68476-78-8 180 TC/TC-S-FKM
62
891 TC/RSC-S-FKM
62
Monochlorobenzene
100 <60 <140 108-90-7 280 CB/SSC-SSC/CB-S-FKM
53,54
Monoethanolamine;See Ethanolamine
MTBE;See Methyl Tert Butyl Ether
Muriatic Acid;See Hydrochloric Acid
Naphtha
100 <70 <158 8030-30-6 155A RSC/CB-S-NBR
11,13 891 CB/RSC-S-NBR
11,13
Naphthalene
<SP <75 <167 91-20-3 255 TC/CB-CB/TC-S-FKM
53,54 280 CB/SSC-TC/CB-S-FKM
53,54
Naphthenic Acid
100 <120 <248
53,54
Natural Gas;See Methane
Neopentyl Glycol
<SP <130 <266 126-30-7 280 TC/SSC-SSC/CB-S-FFKM
53,54
Nickel Acetate
Nickel Nitrate
<SP <120 <248 13138-45-9 255 SSC/TC-CB/SSC-S-FKM
53,54 280 TC/SSC-SSC/CB-S-FKM
53,54
Nickel Plating Solution
100 <100 <212
180 SSC/SSC-S-FKM
32
442 RSC/RSC-S-FKM
32
Nickel Sulfate
Nitrating Acid
100 <65 <149
255 SSC/SSC-CB/SSC-S-EPDM
Nitric Acid
100 <20 <68 7697-37-2 280 SSC/SSC-SSC/CB-A20-FFKM 53,54
Nitric Acid
<70 <100 <212 7697-37-2 280 CB/SSC-SSC/CB -TI/S-FFKM
11,13
Nitric Acid
<60 <70 <158 7697-37-2 255 SSC/SSC-CB/SSC-S-FFKM
Nitric Oxide
100 <10 <50 10102-43-9 225 SSC/TC-SSC/CB-HC-LD-Viton 53,54
Nitroaniline,m<SP <150 <302 99-09-2 280 SSC/SSC-SSC/CB-S-FFKM
53,54
Nitroaniline,o<SP <100 <212 88-74-4 280 SSC/SSC-SSC/CB-S-FFKM
53,54
Nitroaniline,p<SP <100 <212 100-01-6 280 SSC/SSC-SSC/CB-S-FFKM
53,54
Nitrobenzene
Nitroethane
Nitrogen
<100 <20 <68 7727-37-0 4400H SSC/CB-S-EPDM
32
Nitrogen Dioxide
100 <10 <50 10102-44-0 225 SSC/TC-SSC/CB-S-K2037
53,54
Nitromethane
100 <37 <98 75-52-5 4400H SSC/CB-S-FFKM
32
Nitrosyl Chloride
100 <10 <50 2696-92-6 225 SSC/SSC-SSC/CB-TI-FKM
53,54
Nitrous Oxide
100 <37 <98 10024-97-2 4400H SSC/SSC-A20-FKM
32
280 SSC/SSC-SSC/CB-A20-FKM 53,54
Nut Oil
<SP <50 <122
155 SSC/TC-S-FKM
11,13
Aspartame (nutrasweet)
<SP <70 <158 22839-47-0 180 CB/SSC-S-FFKM
62
186 CB/SSC-S-TJ/FKM
62
Octane,n100 <20 <68 111-65-9 180 CB/SSC-S-FKM
11,13
Octanol;See Octyl Alcohol,nOctyl Alcohol,n100 <20 <68 111-87-5 155 SSC/CB-S-EPDM
11,13
Olefin Crude
<120 <248
180 TC/SSC-S-NBR
11,13 891 TC/RSC-S-NBR
11,13
Oleic Acid
100 <100 <212 112-80-1 180 CB/SSC-S-FKM
11,13
Oleum;See Sulfuric Fuming
Olive Oil
100 <80 <176 8001-25-0 155 SSC/TC-S-FKM
11,13
Oxalic Acid
>50 <20 <68 144-62-7 280 CB/SSC-SSC/CB-A20-FKM
53,54
Oxalic Acid
<50 <100 <212 144-62-7 255 SSC/CB-CB/SSC-A20-FKM
53,54 280 CB/SSC-SSC/CB-A20-FKM 53,54
Oxygen (gas)
100 <25 <77 7782-44-7 4400H SSC/CB-S-EPDM
32
280 TC/SSC-SSC/TC-S-EPDM
53,54
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
B
3 - 14
A B A
B A A
A
A
B
B
A A A
A A
A
A
A
A
A B A
A B A
A B B
A
A
A B A
B A A
A
A
A
A
B
B
A A A A
A
A
A B B
A
A
A
A A A A A
A A A A A
A A A A A
A
A A A
A
A
A
A
A
A
A
A B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B A
A B B
A
A
A
A
A A A
A A
A
A
A B B B
A B B B
B B
B
B
A
A
A
A A A A A A A A B B
A
A A A A A
A
A A A A A A B
A
B
B
A A
A
A
A
A
A
A A A A A
A A
B A B B B
A A
A
B A A
A A A A A A
A
A A A A
A A A A A A
A
A B B
A
A
A
A
A
A A A
A A A B B A
A A A
A A A
A A A
A A A A A
A A A
A A A A A A
A A
A A A
A A A
A
A
A B B A
A A A
A
A A A
A
A
A
A A
A
A
A A A A
A
A A A A A A A
A A A A A A A
A A A A A A A
A
B
A
A B A
A A A A A
A
A
A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
A
A A A A A
A A
B A
B A A A B
A
A
A
B
A
A
A
A
A
A
A
B
B
B
A
A
A
A
A
B
A
A A A A A
A A A A A A B
A
A A A A
B B B
B
A A B B B
B B
A B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
C
C
C
L
C
L
L
L
L
G
C
C
C
L
L
G
L
L
G
G
L
C
L
83
A
A
A
A
A
A
A
A
-42
130
80
-45
-95
0.70 0.02 126
-11
1.13 0.05 101
-60
0.74 56.54 -88
L
C 1.66
C
G
296
190
HAZARD
INFO
*
7.34
0.51 F,Xn,Xi,N
0.63
C,T+
T
1.90 Ca,T,N
Xn
*
Xn,N
*
0.81 O,C
O,C
O,C
Ca,T
0.76 Xn,N
Ca,T,Xn
0.41 Ca,Xn
13 29.57
-16
-57
-91
-29
-152 -161
306 114
70
1.42
336 148
1.20 0.00 211
6
-90
1.44
1.51 0.08
210
A A L 0.82 0.00 195

A A
A A L 0.88 0.00 360
A
A
A
A
A
A
A
A
A
A
A
A
A
A
218
L
L
L
L 1.10 0.02 132
A A L
A A C 1.17
A A L
A
A
A
A
A A L
-142
A A L 1.32 0.58 40
A A L
-75
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
4,5
4,5
2
1
3,6
3,5
1,4,5,6

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Oxygen
100 <10 <50 7782-44-7 225 SSC/TC-SSC/TC-S-K1045
53,54
Ozone
100 <37 <98 10028-15-6 4400H SSC/SSC-S-FVMQ
32
280 SSC/SSC-SSC/CB-S-FVMQ 53,54
P-Tertiary Butyl Benzoic Acid
<SP <30 <86 98-73-7 255 SSC/CB-CB/SSC-S-FKM
53,54
P-Tertiary Butylcatechol
<SP >70 >70 98-29-3 280 SSC/SSC-SSC/CB-S-FKM
53,54
Paint Thinner;See Mineral Spirits
Palmitic Acid
<SP <100 <212 57-10-3 180 CB/TC-S-FKM
62
891 CB/TC-S-FKM
62
Paper Stock
>5 <20 <68
53,54 442 CR/CB-S-FKM
32
Paper Stock
<5 <20 <68
155P TC/CB-S-FKM
33
442 CR/CB-S-FKM
33
Paper Stock
<2 <50 <122
155P CB/TC-S-FKM
33
442 CR/CB-S-FKM
33
Paraffin
100 <65 <149 8002-74-2 180 TC/SSC-S-FKM
62
891 TC/RSC-S-FKM
62
Parker O-Lube (TM)
100 <50 <122
180 TC/SSC-S-FKM
62
442 RSC/CB-S-FKM
11,13
Peanut Oil
100 <20 <68 8002-03-7 155 SSC/TC-S-FKM
11,13
Pectin Liquor
<SP <100 <212 9000-69-5 180 TC/TC-S-FKM
62
891 TC/TC-S-FKM
62
Penicillin
<SP <20 <68 69-57-8 280 CB/SSC-SSC/CB-S-FVMQ
53,54
Pentachlorophenol (PCP)
<SP <20 <68 87-86-5 255 TC/CB-CB/TC-S-FKM
53,54
Pentane,n100 <60 <140 109-66-0 280 CB/SSC-SSC/CB-S-FKM
53,54 180 CB/SSC-S-FKM
11
Pentoxone Solvent
100 <20 <68 107-70-0 255 SSC/CB-CB/SSC-S-FKM
53,54
Peppermint Oil
100 <70 <158 8006-90-4 180 TC/SSC-S-FKM
62
891 TC/RSC-S-FKM
62
Perchloric Acid
Perchloric Acid
<10 <50 <122 7601-90-3 255 SSC/SSC-CB/SSC-A20-FKM
53,54 280 SSC/SSC-SSC/CB-A20-FKM 53,54
Perchloroethylene
100 <100 <212 127-18-4 255 TC/CB-CB/TC-M-FKM
53,54 280 CB/SSC-SSC/CB-M-FKM
53,54
Petrol;See Gasoline
Petrolatum
100 <60 <140 8009-03-8 280 TC/SSC-SSC/CB-S-FKM
53,54
Petroleum Ether
100 <20 <68 8032-32-4 4400H SSC/CB-S-FKM
32
53,54
Petroleum Oil;See Crude Oil
Phenetole
Phenol
Phenyl Acetate
Phenyl Acetic Acid
<75 <100 <212 103-82-2 180 CB/TC-M-EPDM
62
891 CB/TC-M-EPDM
62
Phenyl Ethyl Ether;See Phenetole
Phenylhydrazine
53,54
Phorone
<SP <50 <122 504-20-1 180 CB/SSC-S-FFKM
62
186 CB/SSC-S-TJ/FKM
62
Phosgene
100 <20 <68 75-44-5 280 CB/SSC-SSC/CB-HC-EPDM
53,54
Phosphate Esters
<120 <248
280 SSC/SSC-SSC/CB-S-EPDM
53,54
Phosphoric Acid (aerated)
<80 <80 <176 7664-38-2 280 CB/SSC-SSC/CB-S-FKM
53,54
Phosphoric Acid (aerated)
<60 <65 <149 7664-38-2 180 CB/SSC-S-FKM
62
891 CB/SSC-S-FKM
62
Phosphoric Acid
<40 <100 <212 7664-38-2 280 CB/SSC-SSC/CB-S-FKM
53,54
Phosphorus Trichloride
53,54
Photographic Developer
100 <60 <140
180 TC/SSC-S-FKM
11,13 442 CR/CB-S-FKM
11,13
Photographic Emulsion
100 <37 <98
180 TC/SSC-S-FKM
11,13 442 CR/CB-S-FKM
11,13
Photographic Fixer
100 <37 <98
180 CB/TC-S-EPDM
11,13
Phthalic Anhydride
<100 <130 <266 85-44-9 280 TC/SSC-SSC/TC-S-FFKM
53,54
Pickling Solution,(inorganic acid solution)
<20 <68
180 CB/TC-A20-FFKM
11,13 891 CB/TC-A20-FFKM
11,13
Picric Acid
<10 <60 <140 88-89-1 255 SSC/CB-CB/SSC-S-FKM
53,54
Picric Acid (molten)
100 >60 >60 88-89-1 255 SSC/CB-CB/SSC-S-FFKM
Pine Oil
100 >65 >65 8002-09-3 180 TC/SSC-S-FKM
2/53
Pinene
100 <65 <149 80-56-8 155 SSC/CB-S-FKM
11,13 442 CR/CB-S-FKM
11,13
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
A
B
A
A
A
A
A
B
A
A
A
A
B
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
3 - 15
A
B
A
A
A
A
B
A B
A A
A A
A
A A
A A
A A
A A
A
A A
A A
A A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
B A A
A
A
A B B
A
A B
A
B
A
285
52
-183 -219
-111 -193
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
-30
41
1.15
T,C
Ca,T
Ca,T,Xn
C,O
C,O
0.84 Ca,Xn,N
Ca,T+,N,Xi
0.22 F+,Xn
Xn
*
*
*
HAZARD
INFO
L 1.09 0.00 244

19 13.03 T,N,Xi
C
G 1.37 1.87
8 -128
T+,C
*
L 1.87
407
42 196.92 C
L
C
L
C
L 1.57 0.16 76 -92 0.53 T+,Xn,C
L
*
L
*
L
*
C
285 131
Xn
*
C
E,T
C
E,T
L
L 0.86 0.01 156 -64 1.49
L 0.96 0.00 170

C 1.13
182
L
C
A A L
A A L
C 1.00
351
63
L
L
L
C
C
L
C
C
C
L 0.62 0.68 36 -130
L
L
B B L
-101
A A L
A A L 1.61 0.02 121 -22
A
A
A
A
A
A
A
A
A
A
A
A A G
A A G
A A C
C
A
A A A
A A A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A B B A
B
A
A
A
B
A
A
A
A
A
A
B
B
A
A
A
A
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A
A A A
A
A A B
A A A
A A B
A B B
A A A
A A A
A A A
A A A
A A A
A B
A B A
A B A
A A A
A
A
A
A
A
B
A
B
A
A
A
A
A
B
B
B
A
A
A A B
A A
B
A A
A
A A
A
A
A A A A A A A A B A
A A A A
A A A A
A A A A
A
A A
A A
A
A B
A
A
A
A
A
A
A
A
A
A
A
A
A A A A A A A
A A A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A A A
A A
A A B
B B A A B
A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A A A
A
A B B
A
A A A
A A A A A A
A
A
A A A
A
A A A
A A A
A
A
A
A
A
A A A A
A
A
A
A
A A A A A
A
A
A
A A
A A
B A B
A A A A
A A A A
A A A
B B B
A
A
A A A
A A A
A A A
A A A
A A B
B A A B
B
B
B B A B
A
B
B
B
A
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
3,6
1
1
1
3,5
2
2
4
4

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Piperidine
100 <20 <68 110-89-4 180 CB/SSC-S-FFKM
11,13
Plasticizer
<20 <68
53,54
Polybutadiene,cis100 <100 <212 9003-17-2 280 TC/SSC-SSC/CB-S-FKM
53,54
Polybutylene
100 >70 >70
53,54
Polyethylene Glycol
100 <100 <212 25322-68-3 280 TC/SSC-SSC/CB-S-FKM
53,54
Polyethylene Terephthalate
100 <150 <302 25038-59-9 280 TC/SSC-SSC/CB-S-FKM
53,54
Polyglycerol
100 <100 <212 25618-55-7 280 TC/SSC-SSC/CB-S-FKM
53,54
Polyisobutylene;See Polybutylene
Polyisoprene
9003-31-0 280 TC/SSC-SSC/CB-S-FKM
53,54
Polymethacrylate Resin;See Methylmethacrylate
Polypropylene
100 <200 <392 9003-07-0 280 TC/SSC-SSC/CB-S-FKM
53,54
Polystyrene
53,54
Polyvinyl Acetate
<10 <100 <212 9003-20-7 280 TC/SSC-SSC/CB-S-FFKM
53,54
Polyvinyl Acetate,Slurry
<SP <100 <212 9003-20-7 180 TC/SSC-S-EPDM
32
442 CR/CB-S-EPDM
32
Polyvinyl Alcohol (PVA)
<20 <60 <140 9002-89-5 280 TC/SSC-SSC/CB-S-FKM
53,54
Polyvinyl Chloride
<20 >70 >70
280 TC/SSC-SSC/CB-A20-FKM
53,54
Polyvinylidene Chloride
<20 >70 >70
280 TC/SSC-SSC/CB-A20-FKM
53,54
Potash Alum;See Aluminum Potassium Sulphate
Potassium Acetate
<SP <20 <68 127-08-2 180 CB/SSC-S-EPDM
62
Potassium Bicarbonate
>20 <20 <68 298-14-6 180 SSC/SSC-A20-FKM
62
53,54
Potassium Bichromate;See Potassium Chromate
Potassium Bromide
<50 <100 <212 7758-02-3 180 TC/SSC-A20-FKM
62
280 TC/SSC-SSC/CB-A20-FKM 53,54
Potassium Carbonate
>20 <100 <212 584-08-7 180 SSC/SSC-A20-FKM
62
280 CB/SSC-SSC/CB-A20-FKM 53,54
Potassium Carbonate
<20 <100 <212 584-08-7 180 CB/SSC-A20-FKM
62
280 CB/SSC-SSC/CB-A20-FKM 53,54
Potassium Chloride
<30 <100 <212 7447-40-7 180 SSC/SSC-M-FKM
62
280 SSC/SSC-SSC/CB-M-FKM 53,54
Potassium Chromate
<30 <100 <212 7789-00-6 180 TC/SSC-S-FKM
62
891 TC/RSC-S-FKM
62
Potassium Copper Cyanide
Potassium Cuprocyanide;See Potassium Copper Cyanide
Potassium Dichromate
<50 >65 >65 7778-50-9 280 SSC/SSC-SSC/CB-S-FKM
53,54
Potassium Dichromate
<5 <100 <212 7778-50-9 180 SSC/SSC-S-FKM
13
891 RSC/SSC-S-FKM
13
Potassium Fluoride
<30 <100 <212 7789-23-3 180 SSC/SSC-S-FKM
62
891 RSC/SSC-S-FKM
62
Potassium Hydroxide
>50 <70 <158 1310-58-3 280 TC/SSC-SSC/CB-A20-EPDM
53,54
Potassium Hydroxide
<50 <70 <158 1310-58-3 180 TC/SSC-S-EPDM
62
891 TC/SSC-S-EPDM
62
Potassium Hydroxide
<10 <100 <212 1310-58-3 180 TC/SSC-S-EPDM
62
280 TC/SSC-SSC/CB-S-EPDM 53,54
Potassium Nitrate
<SP <100 <212 7757-79-1 280 CB/SSC-SSC/CB-S-NBR
53,54
Potassium Permanganate
>10 <100 <212 7722-64-7 255 SSC/CB-CB/SSC-S-EPDM
Potassium Permanganate
<10 <100 <212 7722-64-7 180 CB/SSC-S-EPDM
62
891 CB/RSC-S-EPDM
62
Potassium Persulfate
<25 <37 <98 7727-21-1 255 SSC/CB-CB/SSC-S-EPDM
Potassium Phosphate,Tribasic
>10 <65 <149 7778-53-2 280 CB/SSC-SSC/CB-TI-FKM
53,54
Potassium Phosphate,Dibasic
<10 <100 <212 7758-11-4 180 CB/SSC-S-FKM
62
891 CB/RSC-S-FKM
62
Potassium Pyrophosphate,Dibasic
53,54
Potassium Pyrophosphate,Monobasic
53,54
Potassium Pyrophosphate,Tribasic
53,54
Potassium Sulfate
<25 <100 <212 7778-80-5 180 CB/SSC-S-FKM
62
53,54
Potassium Sulfide
<SP <37 <98 1312-73-8 255 SSC/CB-CB/SSC-TI-FKM
53,54
Potassium Sulfite
<SP <37 <98 10117-38-1 255 SSC/CB-CB/SSC-HC-FKM
Prestone Anti-Freeze (TM)
100 <37 <98
255 SSC/TC-TC/SSC-S-FKM
53,54
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
A
A
A
A A
A
A A
A A
A A
A
A
A
A
A
A
A
A
A
A
B
B
A A A
A A A
A A A
A A
A A A
A A
B A A
3 - 16
A
A
B
B
B
B
B
B
B
A
A
A
B
B
B
B
B
B
B
A
A A A
A
A A A A A A
A
A A A A A A
A
A A A
A
A
A
A
A
A
A
A
A
A
A
A
A B
B
A
A
A
A A
A B
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
B
A
A
B
A
A
A
A
A
A
A
A
A A A B B B
A A A A A A
A A A A
A B A
A B A
A B A
A A A A A A
A A B A B A
A A B A B A
A A B B A
A A A
A A A A A A
A A A A A A
A A A A A A
A A A A A A
A A A A A A
A A A A A A
A A A
A
A A A A A A
A
A
A
A
A
A
A A
A A A
A B B
A A A A A A A A A A
B B B
A A A
B B B
A A A
B
A A
B
B A B
A A
A A B
A A
B B
A A A
B B B
B B B
B B
B B A
B B A
B B A
B B B
B B B
B B B
A A A
A
A
A
A
A
A
A
A B A A A A A A
A
A A A A A
A A A A A A
A A B
A A A A A A
A A B
A
A A A A A A A A
A
A A A A A B
A
A A A A A B
A
A
A
A
A A A
A
A A A
A
A
A
A
A
A
A A
B B B B B
A
B B B B B
A
B B
B B
A
B B
B B
A
A A B B A
A
B B B B
A A
B B A A
A
A A A
B
A
B
A
A
A
B
B
B
B
B
B
B
B
B B B B B
A A B B B
A
A
A
A
A
B
B
A A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
C
L
C
L
A
A
A
A
A
A
A
C
C
C
C
C
C
C
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
C
C
C 2.12
C
C
C
C
C
C
C
C
C
C
C
C
C
C
L
C 2.75
C
C
C 1.99
C
C
A A C
A A C
A
A
A
A
A
A
A
1327
1416
1380
901
L 0.86 0.04 106
A A C
A
A
A
A
A
A
A
406
771
734
-11
HAZARD
INFO
*
C,N
O,Xn,N
O,Xn,N
O,Xn
Ca,T+,N,Xi,Xn
Ca,T+,N,Xi,Xn
T
C
C
C
Ca,Xi,T,N
*
*
1.38 F,T,C
*
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
2
1
1,5
1
1
1
1
1
1
1
1
1
1
3
3
1,3
1,2
3
1,3
1,3
3
3
3
3
3
3

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Propane (gas)
100 <60 <140 74-98-6 4400H SSC/CB-S-FKM
32
53,54
Propane
100 <60 <140 74-98-6 225 SSC/CB-SSC/CB-S-FKM
11/52 180 CB/SSC-S-FKM
11
Propenoic Acid; See Acrylic Acid
Propionaldehyde
100 <100 <212 123-38-6 255 TC/CB-CB/TC-S-EPDM
Propionic Acid
100 <80 <176 79-09-4 255 SSC/CB-CB/SSC-HC-EPDM
Propyl Alcohol,1-Propanol
<25 <70 <158 71-23-8 155 SSC/CB-S-FKM
11,13
Propyl Nitrate,n<98 <37 <98 627-13-4 280 SSC/SSC-SSC/CB-S-FFKM
53,54
Propylene
100 <20 <68 115-07-1 4400H SSC/CB-S-FKM
32
53,54
Propylene Glycol
100 <60 <140 57-55-6 155 SSC/TC-S-FKM
11,13 891 CB/SSC-S-FKM
11,13
Propylene Oxide,1,2100 <35 <95 75-56-9 280 SSC/SSC-SSC/CB-S-FFKM
53,54
PVC;See Polyvinyl Chloride
Pyridine
100 <100 <212 110-86-1 180 CB/SSC-S-FFKM
11,13
Pyrogallol
<SP <60 <140 87-66-1 280 CB/SSC-SSC/CB-S-FKM
53,54
Pyroligneous Acid
<20 <20 <68 8030-97-5 155 SSC/CB-HC-FFKM
11,13 891 CB/RSC-HC-FFKM
11,13
Pyrrole
53,54
Raffinate
100 >20 >68 68514-29-4 180 TC/SSC-S-FKM
62
891 TC/RSC-S-FKM
62
Red Liquor
100 >65 >149 142-03-0 255 SSC/CB-CB/SSC-S-EPDM
Red Oil;See Oleic Acid
Rosin
100 >65 >149 8050-09-7 180 TC/TC-S-FFKM
2/62 280 TC/TC-TC/CB-S-FFKM
2/53
Saccharose;See Sucrose
Safety Clean-Mixed Solvents (TM)
100 <20 <68
180 CB/SSC-S-FFKM
11,13
Sal Ammoniac;See Ammonium Chloride
Sal Soda;See Sodium Carbonate
Salicylaldehyde
100 <20 <68 90-02-8 155 SSC/CB-S-FKM
11,13
Salicylic Acid
100 <100 <212 69-72-7 180 CB/SSC-HC-EPDM
2,62 280 CB/SSC-SSC/CB-HC-EPDM 2/53
Salt Cake;See Sodium Sulfate 90-99%
Sewage
100 <20 <68
180 CB/SSC-S-FKM
32
442 CR/CB-S-EPDM
32
Shell Sol B (TM)
100 >20 >68
180 TC/SSC-S-FKM
11,13
Shell Spray Base Oils (TM)
100 >20 >68
155 SSC/TC-S-FKM
11,13
Shellflex Oil (TM)
100 >20 >68
155 SSC/TC-S-FKM
11,13
Shellmax (TM)
100 >20 >68
180 TC/SSC-S-FKM
11,13
Shellvis (TM)
100 >20 >68
180 CB/SSC-S-FKM
11,13
Shellwax (TM)
100 >20 >68
180 TC/SSC-S-FKM
62
891 TC/RSC-S-FKM
62
Shellzone (TM)
100 >20 >68
180 TC/SSC-S-FKM
11,13
Silicate Esters
100 <150 <302
180 TC/SSC-S-FKM
32
442 RSC/CB-S-FKM
32
Silicon Tetrachloride
53,54
Silicon Tetrachloride
<10 <37 <98 10026-04-7 180 CB/SSC-S-FKM
11,13 891 CB/CR-S-FKM
11,13
Silicone Fluid
100 <200 <392
186HT CB/SSC-S-Graphite
62
Silver Nitrate
<70 <37 <98 7761-88-8 280 SSC/SSC-SSC/CB-S-EPDM
53,54
Skydrol (TM) HydraulicFluids,HFA,HFB,HFC
100 <120 <248
180 TC/SSC-S-FKM
11,13
Slimes Slurry;See Copper Sulfate
Soda Ash;See Sodium Carbonate
Sodium Acetate
>10 <100 <212 127-09-3 180 CB/TC-HC-EPDM
62
280 CB/TC-TC/CB-HC-EPDM
53,54
Sodium Acetate
<10 <100 <212 127-09-3 155 TC/CB-S-EPDM
13
442 CR/CB-S-EPDM
13
Sodium Aluminate
<SP <20 <68 1302-42-7 155 TC/CB-S-FKM
32
442 CR/CB-S-FKM
32
Sodium Aluminum Sulfate;See Aluminum Sodium Sulfate
Sodium Bicarbonate
<SP <37 <98 144-55-8 180 CB/TC-S-FKM
62
53,54
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
A
A
A
A
A
A
A
A A
A
B A
A
A A
A A
A
A
A
A
A
A
A
A
A
A
A A B
B
A
A A A A
B
3 - 17
A A A A A A A A A A
A A B B B
A A A A
A
A
A
A
A
A
A
A
B A
A A
A A
A A A A A
A A A A A
A A
B
A A A A B B
A B B
A A A A B B
A B B
A A A A A A A A A A
A
A A
A A
A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B A A A A
A A A A A
A A B B A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A B
A
A
A
A
A
A
A
A
A A
A A B
A A A
A A
A A A
A
A
A
A
A
A
A
A
A
A A
A
A A A A A A
A A B A A A A A B
A
A A B B B
A A
A
A
A
A
A
A
A
A
A
A A
A A
A A
A A
A A A A A A
A A A A A
A A
A A A
A
A A
A A A
A A
B
A A A
B A
A A
B
A
A
A
A
A
A
A
A
A
A A A A A A A
A A
A A
A
A
A
A
A
A
A
A A A A
A A B A
A A A A
A A
A A A A
A A B A
A
A
A A A
A
A
A
A
A
A
A A
B B
A B
A
A
A
A
A
A
A A A A A A A
A A A A A A A
A A A A A
A
B
B
B
A
A A
A A
B
A
A A
A A
A A
A
A
B
A
A
A
A
A
A A A A A
A A
A A
L
L
L
L
G
L
L
A A C
A A C
A A C
A A C
A A L
L
L
L
L
L
L
L
A A
L 1.47 0.31
A A L
A A L
A A C
A A L
328
57
-69
-7
159
*
*
*
*
*
*
*
*
*
0.45 Xi
Xi
*
C,N
*
2.49
1.22
-23
Xi
0.88 F,Xn
Xn
1
1
1,2
3,4,5
0.50 11.48 -48 -185 0.09 F+

1.03 0.00 188 -60 41.89
-42
134
NOTES
4,5
4,5
6
0.10 F+
F+
HAZARD
INFO
0.32 F,Xi
1.03 C
1.95 F,Xi
0.79 0.42 48 -103

0.99 0.00 141 -21
0.80 0.03 97 -126
L 1.15 0.00 197

A A C 1.44
256
A A L
A A C
A
A
A
A
A
A
A
A
A
A
A
L 0.98 0.03 115

C
309
L
L 0.97 0.01 130
L
A A L
A
A
A
A
A
A
A
A
A
A
A
A A G 0.49 9.41 -42 -188

A A G
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Sodium Bicarbonate
<5 <100 <212 144-55-8 155 TC/CB-S-FKM
13
442 CR/CB-S-FKM
13
Sodium Bisulfate
>10 <100 <212 7681-38-1 280 CB/SSC-SSC/CB-A20-FKM
53,54
Sodium Bisulfide;See Sodium Hydrosulfide
Sodium Bisulfite
>50 <65 <149 7631-90-5 280 CB/SSC-SSC/CB-HC-FKM
53,54
Sodium Bisulfite
<50 <65 <149 7631-90-5 180 CB/SSC-S-FKM
62
53,54
Sodium Borates
<SP <65 <149 1303-96-4 180 CB/SSC-S-FKM
2/53
Sodium Carbonate
<20 <100 <212 497-19-8 180 CB/TC-S-FKM
62
891 CB/CR-S-FKM
62
Sodium Chlorate
<70 <100 <212 7775-09-9 280 SSC/SSC-SSC/CB-A20-FKM
53,54
Sodium Chloride
<5 >37 >37 7647-14-5 155 CB/SSC-S-EPDM
13
891 CB/CR-S-EPDM
13
Sodium Chloride
<30 <100 <212 7647-14-5 180 CB/SSC-M-EPDM
62
280 CB/SSC-SSC/CB-M-EPDM 53,54
Sodium Chlorite
>20 <100 <212 7758-19-2 255 SSC/SSC-CB/SSC-TI-FFKM
Sodium Chromate
<20 <60 <140 7775-11-3 180 SSC/SSC-S-FKM
62
891 SSC/SSC-S-FKM
62
Sodium Cyanide
<10 <37 <98 143-33-9 255 SSC/CB-CB/SSC-S-EPDM
Sodium Cyanide
<10 <100 <212 143-33-9 280 CB/SSC-SSC/CB-A20-EPDM
53,54
Sodium Dichromate
<SP <100 <212 10588-01-9 280 SSC/SSC-SSC/CB-S-FKM
53,54
Sodium Dichromate
<20 <100 <212 10588-01-9 180 SSC/SSC-S-EPDM
62
891 RSC/SSC-S-EPDM
62
Sodium Dithionite
<SP <70 <158 7775-14-6 255 TC/CB-CB/TC-S-EPDM
Sodium Glutamate
<SP <70 <158 32221-81-1 155 TC/CB-S-FKM
11,13 891 CB/TC-S-FKM
11,13
Sodium Hydrosulfide
Sodium Hydrosulfite;See Sodium Dithionite
Sodium Hydroxide
>40 <100 <212 1310-73-2 255 SSC/TC-CB/SSC-A20-EPDM
53,54 280 TC/SSC-SSC/CB-A20-EPDM 53,54
Sodium Hydroxide
<40 <65 <149 1310-73-2 180 TC/SSC-S-EPDM
62
255 SSC/TC-CB/SSC-S-EPDM 53,54
Sodium Hypochlorite
>10 <55 <131 7681-52-9 255 SSC/SSC-CB/SSC-HC-FKM
Sodium Hypochlorite
<10 <20 <68 7681-52-9 180 SSC/SSC-S-FKM
11,13 891 CB/CR-S-FKM
11,13
Sodium Metaphosphate
<SP <100 <212 10361-03-2 180 SSC/SSC-S-EPDM
62
891 SSC/SSC-S-EPDM
62
Sodium Nitrate
<90 <100 <212 7631-99-4 180 SSC/SSC-S-EPDM
62
280 SSC/SSC-SSC/CB-S-EPDM 53,54
Sodium Persulfate
<SP <37 <98 7775-27-1 180 CB/SSC-A20-FKM
62
891 CB/SSC-A20-FKM
62
Sodium Phosphate
>20 <60 <140 7601-54-9 180 SSC/SSC-S-FKM
62
891 RSC/SSC-S-FKM
62
Sodium Phosphate
<20 <60 <140 7601-54-9 180 CB/TC-S-FKM
13
891 CB/SSC-S-FKM
13
Sodium Plumbate
<SP <20 <68 12201-47-7 255 TC/CB-CB/TC-S-FKM
53,54
Sodium Silicate
<SP <60 <140 1344-09-8 155 TC/CB-S-FKM
32
442 CR/CB-S-FKM
32
Sodium Sulfate
>30 <100 <212 7757-82-6 280 SSC/SSC-SSC/CB-S-FKM
53,54
Sodium Sulfate
<30 <100 <212 7757-82-6 180 SSC/SSC-S-FKM
62
Sodium Sulfide
>50 >75 >75 1313-82-2 280 SSC/SSC-SSC/CB-S-FFKM
53,54
Sodium Sulfide
Sodium Sulfite
<50 <75 <167 7757-83-7 180 TC/SSC-S-FKM
62
53,54
Sodium Tetraborate;See Sodium Borates
Sodium Thiocyanate
<90 <80 <176 540-72-7 180 SSC/SSC-S-FKM
62
Sodium Thiosulfate
>15 <100 <212 7772-98-7 180 SSC/SSC-S-FKM
62
Sour Gas;See Hydrogen Sulfide
Sour Water
100 <50 <122 7783-06-4 180 SSC/SSC-HC-EPDM
11,13 891 CB/SSC-HC-EPDM
11,13
Stannic Chloride
<50 <65 <149 7646-78-8 180 SSC/CB -HC/S-FKM
11,13
Stannous Chloride
<10 <100 <212 7772-99-8 255 SSC/CB-CB/SSC-S-FKM
53,54
Starch
>5 <100 <212 9005-25-8 180 CB/SSC-S-FKM
32
442 CR/CB-S-FKM
32
Steam
100 >315 >315 7732-18-5 180 CB/SSC-S-EPDM
21
Steam
100 >120 >120 7732-18-5 180 CB/SSC-S-EPDM
11
Stearic Acid
100 <65 <149 57-11-4 180 CB/SSC-S-FFKM
62
186 CB/SSC-S-TJ/FKM
62
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
3 - 18
A
A
A
A
A
B
B
B
A
A
A
A
A
A
B
A
B
B
A
A
A
A
A
A
A
A
B
B
B
B
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
B
A
B
A
B
B
A
A
A
A
A
A
B
B
A
B
A
A
A
A
A
A
A
A
A
A A
A A A
B
A
A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A
A
A A A
A
A A
A A A A
A
A
B B A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A
A
A
A
A
A
A
B
A
A
B
A
A
A
A
A
B B B A
B B A A
B B A A B
A
A
A A A
B
A
A A B
A A A A B
A A A
A
A A A A A
A A A A A
A A A A A
A A B B A
A A A A A
A A A A A
A
A
A
A
A
B
B
A
A
A
A
A
A
A
A A A A
A A
B B
A B
A A A A A
A
A
A A B A
A A
A A
A
A
A A
A
A
A A
A A
A A
A A
B A
B A
B A
B A
A A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A A A A A A A A A
A
A A A A A A A
A
A
A A
A B A
A
A A
A A
A
A A
A
A A A
B A A
B A A
A A
A A
A A
A
A B
A
A A
A
A A
A A
A
A A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A
A A A A
A A
A
B
A
B
A
A
A
A
A
A
A
A A A
A A A
A A
A
A
A
A
A
A B A
A A A
A
A
A A A
B A
A A
B A A
A
A A A
B B A
B B
B B B
B B B
B
A A
A
A
A
B
B
A
A
B
B
B
A
A
A A A A A A A B B B
A A A A A A A B
B
A A A A A
A A B B A
A
A
B
B
B
A
A
A
A
A
A
A
A
B
A
A A
B
A
B
B
B
B
A
A
A
A
A
A
A
B
A
A
A
B
A
B
B
A
A
B
B
B
B
A
A
A A B B B
B A B B B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C 2.10
C
C
L
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C 2.49
C 2.16
C
C
C
C
C
C
C
C
C
C
A
A
A
A
A
A
A
380
1557
1496
1465
1575
G 0.78 19.91 -60

L
C
C
L 0.99 0.03 100
A L
A C 1.02
375
A
A
A
A
A A C
A A C
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A C
A A C
70
-85
950
884
307
323
54
564
357
61
850
260
801
186
C,N
C,N
C
C
0.91
NOTES
1
1
1,5
1
1
1
1
1,2,3
5
5
2,3
1
1
1
1
2,5
1
1
1
1
1
1,2
1,2
1
Ca,O,T+,N,Xn,Xi
Ca,O,T+,N,Xn,Xi 1
Xn
Xi
O,Xn
Xn
Xn
Xi
HAZARD
INFO
0.12 F+,T+,N
C
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Styrene Monomer
100 <50 <122 100-42-5 280 TC/SSC-SSC/TC-S-FFKM
53,54
Succinic Acid
<SP <20 <68 110-15-6 180 CB/SSC-TI-FKM
2/62 280 CB/SSC-SSC/CB-TI-FKM
2/53
Succinic Anhydride
<SP
108-30-5 255 TC/CB-CB/TC-S-FKM
53,54
Sucrose
100 <120 <248 57-50-1 180 TC/TC-S-FKM
62
280 TC/TC-TC/CB-S-FKM
53,54
Sugar Solutions;See Sucrose
Sulfate Liquors;See White Liquor
Sulfite Liquors;See Red Liquor
Sulfur Chloride
100 <60 <140 10025-67-9 255 SSC/CB-CB/SSC-HC-FKM
Sulfur Dichloride
100 <20 <68 10545-99-0 280 CB/SSC-SSC/CB-HC-FKM
53,54
Sulfur Dioxide
97 <50 <122 7446-09-5 225 SSC/CB-SSC/CB-TI-FFKM
53,54
Sulfur Trioxide (wet)
53,54
Sulfur,Molten
<100 <200 <392 7704-34-9 280 TC/SSC-SSC/CB-S-FKM
53,54
Sulfuric Acid
>95 <37 <98 7664-93-9 180 SSC/SSC-S-LD-Viton
11,13 891 RSC/SSC-S-LD-Viton
11,13
Sulfuric Acid
<95 <37 <98 7664-93-9 180 SSC/SSC-A20-LD-Viton
11,13 891 SSC/SSC-A20-LD-Viton
11,13
Sulfuric Acid
<75 <37 <98 7664-93-9 180 CB/SSC-A20-LD-Viton
11,13 440 CB/RSC-S-LD-Viton
11,13
Sulfuric Acid
<5 <37 <98 7664-93-9 180 CB/SSC-S-FKM
11,13
Sulfuric Acid
36 <37 <98 7664-93-9 180 CB/SSC-A20-LD-Viton
11,13 440 CB/RSC-S-LD-Viton
11,13
Sulfuric Acid,Fuming
103 <20 <68 8014-95-7 180 SSC/SSC-S-FFKM
11,13 186 SSC/SSC-S-TJ/FKM
11,13
Sulfurous Acid
100 <60 <140 7782-99-2 255 SSC/SSC-CB/SSC-A20-FKM
53,54 280 SSC/SSC-SSC/CB-A20-FKM 53,54
Sulfurous Acid
<100 <60 <140 7782-99-2 255 SSC/SSC-CB/SSC-TI-FKM
53,54 280 SSC/SSC-SSC/CB-TI-FKM 53,54
Sulfamic Acid
<SP <100 <212 5329-14-6 180 SSC/SSC-S-FKM
62
Syltherm 800 (TM) Dow Corning
100 <20 <68
255 TC/TC-TC/TC-S-FKM
53,54
Tall Oil
100 <100 <212 8002-26-4 180 TC/SSC-S-FKM
62
53,54
Tall Oil Resin (acids)
100 >100 >100
186 TC/SSC-S-TJ/FKM
62
Tannic Acid
<SP <20 <68 1401-55-4 155 SSC/CB-S-FKM
11,13
Tartaric Acid
>20 <100 <212 87-69-4 180 CB/SSC-S-FKM
62
53,54
Terephthalic Acid
<SP <37 <98 100-21-0 180 TC/SSC-S-FFKM
13
186 SSC/SSC-S-TJ/FKM
13
Tert-Butyl Alcohol
100 >25 >25 75-65-0 180 CB/SSC-S-FKM
11,13
Tert-Butyl Mercaptan
100 <20 <68 75-66-1 255 TC/CB-CB/TC-S-FKM
53,54
Tetrabutyl Titanate
100 <20 <68 5593-70-4 155 TC/CB-S-FKM
11,13 891 CB/TC-S-FKM
11,13
Tetrachloroethane
100 <100 <212 79-34-5 255 TC/CB-CB/TC-HC-FKM
Tetrachloroethylene;See Perchloroethylene
Tetraethyl Lead
100 <50 <122 78-00-2 280 CB/SSC-SSC/CB-S-FKM
53,54
Tetrahydrofuran
100 <20 <68 109-99-9 186 CB/SSC-S-TJ/FKM
62
180 CB/SSC-S-FFKM
62
Tetrahydronaphthalene,1,2,3,4100 <20 <68 119-64-2 180 CB/TC-S-FKM
11,13 891 TC/CB-S-FKM
11,13
Tetrapotassium Pyrophosphate;See Potassium Pyrophosphate
Therminol (TM) 44,55,66
100 <175 <347
180 TC/SSC-S-FKM
2/62
Thiols
100 <70 <158 74-93-1 186 CB/SSC-S-TJ/FKM
62
Titanium Dioxide
>10 >37 >37 13463-67-7 280 SSC/SSC-SSC/CB-S-FKM
53,54
Titanium Dioxide
53,54 255 TC/TC-TC/CB-S-FKM
53,54
Titanium Tetrachloride
53,54
Toluene
100 <100 <212 108-88-3 180 CB/SSC-S-FFKM
11,13
Toluol;SeeToluene
Tomato Juice
100 <60 <140
180 SSC/SSC-S-FKM
62
891 CB/RSC-S-FKM
62
Toxaphene
Transformer Oil
100 <150 <302
180 TC/SSC-S-FKM
11
891 TC/RSC-S-FKM
11
Transmission Fluid Type A
100 <175 <347
180 TC/SSC-S-FKM
2/62
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
3 - 19
A
A
A
B
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
A
A
A
B
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A
A
B
B
A
A
A
A
A
A
A
A B B
A
A A
A A
A
B
A
A
A A A
A
A B A
B B B
A A A A A
A
B B
A A
A B
A A
B B
A
A
A
A
A
A
B B
B A A
A
A
A
A A A A A
A A A A A
A B A A B
A A A
A
A
A
A
A
A
A A A A A
A A A A A
A
A A A
A
A A A
A A A A
B A A A
A A A A
A
A
B
A
A
A A
A
A
A
B
B B
A
A A A A A A
A
A
A
A
A
A
B
A
A A A A A
A A A A
A A A A A
A
A
B
B
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A A
A A A A A A
A
A A
A
A A
A
A A
A A
A
A A A
A
A
A A
A A
B
A A
A
A A
A A A
A
A
B
A A A
A
A
A
A A A
A
A A B
A A A
A
A
A
A
A
A
A
B A A
A
A
A
A
A
A
A
B A A A A
B A A A A
A
A A A
A
A A A
A
B
A
A
A
B
A
A
A
B
A
A
B B B
A A
A A A
A A
A A
A A A
A
A
B B
B A A
A A
A
A A B
A A
A A B
A B B
A A A
A A
A A A
A A
B B
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
G
G
C
L
L
L
L
L
L
L
L
C
L
L
L
C
C
C
L
L
L
L
1.59 0.01 145
559
82
0.79 0.24 64
1.51
2.13 0.00
-31
188
120
-44
427
26
1
205
A
A
A
A
A
A
A
A
L
C
L
L
A A L
A A L
A A C
1857
C
B B L
-24
A A L 0.86 0.04 111
-95
HAZARD
INFO
T,Xn,C,N
C,Xi,N
Xi
0.70 Xn,Xi
*
Ca,T,Xn,Xi,N
*
*
C
0.55 F,Xn
*
F+,Xn,N
0.46 F,Xi
2.02 Xi,N
1.62 T+,N
4.31 F,Xn
0.58
Xi
*
17 1.82
115
10 23.55 C
C
C
Xi
C
60 -122
45
445
1.82 0.00 337
1.91 0.35
1.61 0.28
L 0.90 0.01 145

C 1.57
318
C
263
C
A A L
-134
A A L 0.88 0.21 66 -109
A A L 0.97 0.00 208 -36
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
6
2,3,5
2,3,5
6
5,6
1
2
4,5
2,3
1,2,3
5,6

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
Triacetin
100 <20 <68 102-76-1 155 TC/CB-S-EPDM
11,13
Triallyl Phosphate
100 <20 <68
255 SSC/SSC-CB/SSC-S-FKM
Triazole,1,2,4<50 <100 <212 288-88-0 155 TC/CB-S-FKM
11,13 891 CB/TC-S-FKM
11,13
Tributoxy Ethyl Phosphate
100 <20 <68 78-51-3 255 SSC/TC-CB/SSC-S-FFKM
53,54 280 TC/SSC-SSC/CB-S-FFKM
53,54
Tributyl Phosphate
100 <20 <68 126-73-8 255 TC/CB-CB/TC-S-FFKM
Trichloroacetic Acid (TCA)
<50 <100 <212 76-03-9 280 SSC/SSC-SSC/CB-HC-FFKM
53,54
Trichlorobenzene,1,2,4100 <65 <149 120-82-1 280 CB/SSC-SSC/CB-S-FKM
53,54
Trichloroethane,1,1,1100 <60 <140 71-55-6 255 TC/CB-CB/TC-S-FKM
53,54
Trichloroethylene
Trichloroethylene
100 <20 <68 79-01-6 255 SSC/CB-CB/SSC-S-FKM
53,54
Trichlorofluoromethane
100 <20 <68 75-69-4 4400H SSC/CB-S-FFKM
32
Tricresyl Phosphate
100 <65 <149 1330-78-5 255 TC/CB-CB/TC-HC-FKM
Triethanolamine
100 <50 <122 102-71-6 186 CB/SSC-S-TJ/FKM
62
180 CB/SSC-S-FFKM
62
Triethylamine
100 <50 <122 121-44-8 255 TC/CB-CB/TC-S-FFKM
Trisodium Phosphate;See Sodium Phosphate
Tung Oil
100 <200 <392 8001-20-5 180 TC/SSC-S-FKM
2,53
Turbine Oil #15
100 <120 <248
180 TC/SSC-S-FKM
11
891 TC/RSC-S-FKM
11
Turbo Oil #35
100 <120 <248
180 TC/SSC-S-FKM
11
891 TC/RSC-S-FKM
11
Turpentine
100 <65 <149 8006-64-2 180 TC/SSC-S-FKM
11,13
Ucon (TM) Hydrolubes
100 <100 <212
180 TC/SSC-S-EPDM
11,13
Ucon (TM) Oil
100 <100 <212
180 TC/SSC-S-EPDM
11,13
Urea
>50 <60 <140 57-13-6 280 SSC/SSC-SSC/CB-TI-FKM
53,54
Urea
<50 <60 <140 57-13-6 180 SSC/SSC-S-FKM
62
891 CB/RSC-S-FKM
62
Urea-Formaldehyde Resin
<SP <60 <140 9011-05-6 280 TC/SSC-SSC/CB-S-FFKM
53,54
Varnish
100 <100 <212
53,54
Vegetable Juices
100 <60 <140
180 CB/TC-S-FKM
11,13 442 CR/CB-S-FKM
11,13
Vegetable Oil
100 <65 <149
180 TC/SSC-S-FKM
62
53,54
Versilube (TM) F44,50,55
100 >175 >347
186HT SSC/SSC-S-FKM
62
Vinegar;See Acetic Acid-10%
Vinyl Acetate
100 <60 <140 108-05-4 280 TC/SSC-SSC/CB-S-FKM
53,54
Vinyl Acetylene
53,54
Vinyl Chloride (gas)
53,54
Vinyl Chloride
53,54
Vinylpyridine
53,54
Vinyltoluene
100 <20 <68 25013-15-4 255 SSC/SSC-CB/SSC-S-FKM
Wagner (TM) 21b Brake Fluid
100 <100 <212
180 CB/TC-S-EPDM
11,13
Water,Boiler Feed
100 >120 >248 7732-18-5 180 CB/SSC-S-EPDM
23
155 SSC/DC-S-EPDM
23
Water,Borated
100 >120 >212
255 SSC/SSC-SSC/SSC-S-EPDM
Water,Brackish
100 >20 >68
155 TC/CB-S-EPDM
11,13
Water,Cooling Tower
100 >20 >68 7732-18-5 155 TC/SSC-S-FKM
11,13 442 RSC/RSC-S-FKM
11,13
Water,Deionized
100 >50 >122 7732-18-5 180 CB/SSC-S-EPDM
11,13 442 RSC/RSC-S-EPDM
11,13
Water,Fresh
100 <100 <212 7732-18-5 155 TC/CB-S-EPDM
11,13
Water,Heavy
100 >20 >68 7789-92-0 155 SSC/TC-S-FKM
11,13 442 RSC/RSC-S-FKM
11,13
Water,Hot Condensate
100 >120 >212 7732-18-5 155 TC/CB-S-EPDM
23
155 TC/CB-S-EPDM
21
Water,Sea
100 <20 <68
180 TC/SSC-S-EPDM
11,13
Whiskey & Wines
100 <100 <212
180 CB/SSC-S-FKM
11,13
White Liquor
100 <100 <212
53,54 280 TC/SSC-SSC/CB-S-EPDM 53,54
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A
A
A
A
A
B
A
A
A
A
A
A
A A A A
A
A B A B
A B A B
A A A
A A A
A
A B A
A B A
A B A
A B A
A B A
A A A A
A B A
A B A
A B A A
A A A A
A A A A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
3 - 20
A A A
A
A A B
A A B
A
A
A A
A
A
A A A
A A A
A A A
A A A
A A
A A A
A A A
A A A
A A
A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A A
A
A A
A A A A A
A A
A
A A
A A B A A
A
A A
A A A A A
A A
A A
A
A A
A
A A
A A A A A
A A A A A
A A A A A
A
A
A
A A A
A
A
A
A A B A A
B
A A
B A A A
A
A A A
A
A A A
A
A
B
A
A
A A
A A
A A
A
A
A
A
A
A A
A A
B A
A
A
B A
A A
A A
A A A A
A
A A A A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
B
B
B
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A B
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A A A
A B A
A
A A
A
A
A
A
B
A
A
A
A A B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A B
A A A
A A
A
A A
B
A
B
A A
A A
A
A A
A B
A
A B A
A
A
A A A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
L
G
G
G
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
C
C
C
L
L
L
L
L
L
C
L
L
C
L
L
L
L
L
L
L
L
3.44
*
Xn
133
0.99 0.03 100

1.11 0.03 101
0.93 0.15 73 -93

0.68 2.04
5
0.90 3.93 -14 -154
192
0.91
1.12
*
*
*
*
*
0.41 F
0.20
0.17 Ca,F+,T
Ca,F+,T
*
*
*
*
*
*
Xn,Xi,N
*
*
1.12 0.00 335

21 609.01
0.72 0.09 89 -115 0.35 F,C,Xn
1.48 1.05
HAZARD
INFO
Xn
57
C
17 19.05
-30 0.79 Xn,N
-85 0.55 Ca,Xn
Ca,Xn
24 -111 0.43
198
1.45 0.00 213
1.33 0.16 74
1.46 0.10 87
1.15 0.00 259
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
1,2
2,4,5
1
2,4,5
1,2
2
2
3,6
3
4,5,6
4,6
1,5
1,5
3
3
6
6
6
6

TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
FLUID
White Oil;See Mineral Oil

White Pine Tar
<50 <122
53,54 255 TC/TC-CB/TC-S-FKM
53,54
White Water;See Paper Stock 1%
Wood Alcohol;See Methyl Alcohol
China Wood Oil;See Tung Oil
Xenon
100 <37 <98 7440-63-3 225 SSC/CB-SSC/CB-S-FKM
53,54
Xylenes
100 <60 <140 1330-20-7 180 CB/SSC-S-FFKM
11,13
Xylol;See Xylenes
Zeolites
<50 <20 <68 1318-02-1 280 TC/SSC-SSC/CB-S-FKM
53,54 255 TC/CB-CB/TC-S-FKM
53,54
Zinc Acetate
<SP <60 <140 557-34-6 255 SSC/DC-CB/SSC-S-EPDM
Zinc Chloride
Zinc Nitrate
Zinc Oxide
<50 <100 <212 1314-13-2 280 SSC/SSC-SSC/CB-S-FFKM
53,54
Zinc Phenolsulfonate,1,4<SP <20 <68 127-82-2 255 SSC/SSC-CB/SSC-S-FFKM
Zinc Phosphate
<20 <20 <68 7779-90-0 255 SSC/SSC-CB/SSC-HB-FFKM
53,54 280 SSC/SSC-SSC/CB-HB-FFKM 53,54
Zinc Sulfate
<40 <100 <212 7733-02-0 180 SSC/SSC-S-FKM
62
Monochlorobenzene;See Chlorobenzene
Methyl Bromide;See Bromomethane
Trichlormethane;See Chloroform
Carbamide;See Urea
Cupric Chloride;See Copper Chloride
Cupric Sulfate;See Copper Sulfate
Glycerol;See Glycerin
Triiodomethane;See Iodoform
Glycolic Acid;See Hydroxyacetic Acid
Asphalt;See Bitumen
Carbon Bisulfide;See Carbon Disulfide
Pyrogallic Acid;See Pyrogallol
Water Glass;See Sodium Silicate
Deuterium Oxide;See Water,Heavy
Nutrasweet (TM);See Aspartame
Carbon Bisulfide;See Carbon Disulfide
Coal Tar;See Creosote
Beet Sugar;See Sucrose
Xylenol
100 >100 >100 1300-71-6 180 SSC/SSC-S-FKM
32
891 RSC/RSC-S-FKM
32
Dowtherm A (TM)
100 <175 <347 8004-13-5 180 TC/SSC-S-FKM
2/62
Therminol (TM) 44,55,66
100 >175 >175
186HT TC/SSC-S -FKM
62
Acrimide;See Acetamide
Acetic Acid Ethenyl Ester;See Vinyl Acetate
Acetic Acid 2-Methyl,2-Butyl Ester;See Amyl Acetate
Acetic Acid Methyl Ester;See Methyl Acetate
Ethanoic Anhydride;See Acetic Anhydride
Acetol;See Diacetone Alcohol
Propranoic Acid Nitrile;See Acrylonitrile
Alum Potash;See Potassium Hydroxide
Amino Benzene;See Aniline
Amino Ethanol;See Ethanolamine
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
A
A A A A A
A
A
A A B B B
A A A A
A
B B A B
A A A A
A
A
A
A
A
A
A
A
A A A A
B A B B
A B A B
A
A
A A A A A
A
A
A
A
A
A
A A A
A A A A A
A A A A
A A A A
A
A A
A
A A B A
A
A
A
A A
A
A A B A
C
C
C
C
C
C
C
C
-112
A A
1.03 0.00 225
A A L
L
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A C
A
A
B
A
A
A
A A A A A
A A G
A A L
A A
A
A A A A A A A
A A A A A A A A A A A A A
A A
76
680
1975
Xi,N
C,N
Xn
3 - 21
0.00 T,N
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)
NOTES
5
1
1,2,5
1
5
5,6

HAZARD
INFO
FLUID
3 - 22
TEMPERATURE
C
Secondary
MATERIAL
PIPING
PLANS
CAS
PERCENT
CONCENTRATION
Methyl Butanol;See Amyl Alcohol

Amyl Hydride;See Pentane,-n
Amylum;See Starch
Phenyl Amine;See Aniline
Ant Oil;See Furfural
Azine;See Pyridine
Azotic Acid;See Nitric Acid
Baking Soda;See Sodium Bicarbonate
Benzene Carboxylic Acid;See Benzoic Acid
Benzene Carbonal;See Benzaldehyde
Blue Vitriol;See Copper Sulfate
Bran Oil;See Furfural
Bischofite;See Magnesium Chloride
Carbinol;See Methyl Alcohol
Caustic Lime;See Calcium Hydroxide
Tetrachloromethane;See Carbon Tetrachloride
Phenyl Chloride;See Chlorobenzene
Chloroethane;See Ethyl Chloride
Chloroethanoic Acid;See Chloroacetic Acid
Chloroethylene;See Vinyl Chloride
Chloromethane;See Methyl Chloride
Chlorothene;See Trichloroethane
Pimlic Ketone;See Cyclohexanone
Ethyl Carbonate;See Diethyl Carbonate
Dioxysuccinic Acid;See Tartaric Acid
Boletic Acid;See Fumaric Acid
Glaubers Salt;See Sodium Sulfate
Methanal;See Formaldehyde
Sand Acid;See Hydrofluosilicic Acid
Ketone;See Isophorone
Methyl Phenyl Ketone,m-;See Acetophenone
Ligroin;See Nitrobenzene
Octadecanoic Acid;See Stearic Acid
Octadecanoic Acid,9-;See Oleic Acid
Carbolic Acid;See Phenol
Phthalic Acid;See Terephthalic Acid
Triad;See Trichloroethylene
White Vitriol;See Zinc Sulfate
Tin Tetrachloride;See Stannic Chloride
Tin Chloride;See Stannous Chloride
SEAL
Primary
MATERIAL
Recommended
Mechanical Seal
SEAL
Fluid
Information
Metals
Faces
Elastomers
Fluid
Properties
PIPING
PLANS
S
A20
HB
HC
MONEL
TI
CB
CR
TC
SSC
RSC
DC
FKM
EP
BUNA-N
NEOPRENE
TJ/FKM
FF550
FF250
PHASE
SPECIFIC
GRAVITY (25C)
(ATM)
VAPOR
PRESSURE (25C)
(C)
BOILING
POINT
(C)
MELTING
POINT
VISCOSITY (CP)
(1ATM) (25C)

NOTES
HAZARD
INFO
Section 4
Environmental
Control Plans

PLAN 2
PUMP DISCHARGE
Cooling Jacket
Use with single seal
or dual seals
Maintains or elevates box
temperature to prevent
product solidification with
polymers, resins, tars
Use to cool seal
Common heat transfer fluids:
water
thermal oils, glycols
steam
A close tolerance thermal
bushing recommended
HEAT TRANSFER
FLUID OUT
OPTIONAL
FLOWMETER
PUMP
SUCTION
EXTERNAL
HEAT TRANSFER
FLUID IN
RESTRICTION
(THROAT) BUSHING
PLAN 11
Discharge
Recirculation
Use with a single seal
Cools seal
Increases pressure in
seal chamber
Clean fluids only
solids can erode seal
An orifice can be used
to reduce flow
PUMP DISCHARGE
PUMP
SUCTION
RESTRICTION
(THROAT) BUSHING
4-2

PLAN 13
PUMP DISCHARGE
Suction
Recirculation
Prevents solids hang-up
Lowers seal chamber pressure
Cools seal
Reduces seal generated heat
Use caution with low
vapor liquids
Stuffing box lantern ring
connection can also be used
PUMP
SUCTION
PLAN 21
Cooled Discharge
Recirculation
HEAT EXCHANGER
COOLANT
OUT

Cools seal in hot services
and/or volatile fluids
Increases pressure in
seal chamber
Solids in product can
erode seal
An orifice can be used
to reduce flow
Close clearance bushing
recommended
COOLANT
IN
PUMP DISCHARGE
PRODUCT
OUT
RESTRICTION
(THROAT) BUSHING
PUMP
SUCTION
4-3
PRODUCT
IN

PLAN 23
Cooling With
Pumping Ring
HEAT EXCHANGER
COOLANT
OUT
Use with a pumping ring seal

Cools seal in hot services
and/or volatile fluids
Minimizes heat exchanger size
and coolant water usage
Close clearance bushing
recommended
COOLANT
IN
PUMP DISCHARGE
4 ft.
(1,2 m)
MAX.
PRODUCT
IN
1 ft. (0,3 m)
MINIMUM
PRODUCT
OUT
RESTRICTION
(THROAT)
BUSHING
PUMP
SUCTION
PLAN 32
Flush
CLEAN FLUSH IS 515 PSI

GREATER THAN THE MAXIMUM
SEAL CHAMBER PRESSURE

Prevents solids hang-up
Acceptable flush fluids
Clean compatible fluid
Water, if compatible
Clean product
Downstream additive
Carrier fluid
FLOWMETER
PUMP DISCHARGE
CLEAN
EXTERNAL
FLUSH
PUMP
SUCTION
RESTRICTION
(THROAT) BUSHING
4-4

PLAN 52
FILL
Circulation With
External Buffer
Fluid Tank
Use with a dual seal
Low pressure buffer fluid,
2,0 bar g minimum
Buffer fluid should be clean,
compatible and lubricating
Gland inlet and outlet
connections dependent
on shaft rotation
VENT
PUMP DISCHARGE
BUFFER
FLUID TANK
WITH
OPTIONAL
HEAT
EXCHANGER
4 ft.
(1,2 m)
MAX.
1 ft.
(0,3 m)
MIN.
COOLANT INLET
AND OUTLET
PUMP
SUCTION
PLAN 53
Circulation With
Pressurized External
Barrier Fluid Tank
FILL
EXTERNAL
GAS PRESSURE

Pressurize barrier fluid
1 - 2 bar g over maximum
seal chamber pressure
Barrier fluid should be clean,
on shaft rotation
BARRIER
FLUID TANK
WITH
OPTIONAL
HEAT
EXCHANGER
PUMP DISCHARGE
4 ft.
(1,2 m)
MAX.
1 ft. (0,3 m) MIN.
COOLANT INLET
AND OUTLET
PUMP
SUCTION
4-5

PLAN 53 Modified
Circulation With
Barrier Fluid Tank
Maintains constant pressure
and liquid supply to the
dual seal
External water pressure is
set at 2 bar g over maximum
Initial tank level is set
through the external water
pressure line
Pressurize tank to 1,75 bar g
over maximum seal chamber
pressure with a regulated
gas pad, then isolate
Tank is then charged with
regulated external
water pressure
FILL
EXTERNAL
GAS PRESSURE
BARRIER
FLUID TANK
WITH
OPTIONAL
HEAT
EXCHANGER
PUMP DISCHARGE
4 ft.
(1,2 m)
MAX.
1 ft. (0,3 m) MIN.

COOLANT INLET
AND OUTLET
PUMP
SUCTION
PLAN 54 with DualFlow
Circulation With
Barrier Fluid Source
and DualFlow
OPTIONAL
LOW FLOW
ALARM

DualFlow simultaneously
sets and monitors barrier
fluid pressure and flow
on shaft rotation
PUMP DISCHARGE
CLEAN BARRIER
FLUID IN
BARRIER
FLUID OUT
PUMP
SUCTION
4-6

PLAN 54
Circulation With
Barrier Fluid Source
FLOWMETER

on shaft rotation
CLEAN
EXTERNAL
BARRIER
FLUID
PUMP DISCHARGE
BARRIER
FLUID OUT
PUMP
SUCTION
PLAN 62
PUMP DISCHARGE
Quench
Prevents coking and
crystallization
Common quench fluids:
steam, water, nitrogen
Low pressure only
CLEAN
EXTERNAL
QUENCH IN
PUMP
SUCTION
DRAIN OUT
4-7
Section 5
Reference

Reference
SEAL CHAMBER PRESSURE ESTIMATION
Seal chamber pressure must be known before the proper seal
and flush plan can be selected. Seal chamber pressure can vary from
pump design, flow rate, and fluid being pumped. Suction and discharge
pressures are required to perform these calculations. Often, pump spec
sheets can be old and outdated i.e., design, operating points may have
changed due to a change in process demands. It is for this reason,
that suction and discharge pressures should be physically measured
with pressure gages.
Single Stage, Single Suction, Overhung Process Pumps
Overhung ANSI pumps are the most common process pumps in
the industry. The seal chamber is located behind the pump impeller.
Seal chamber pressure can vary based on pump design.
Pump designs include wear rings and balance holes in the impeller
to reduce thrust load on the bearings. The seal chamber pressure
is a function of wear ring clearance as well as size and location
of the balance holes. The following equations are based on closed
throat design seal chambers.
Enclosed or Semi-Enclosed Impellers with
wear ring design and balance holes
Psb = Ps + .05(Pd-Ps)
Open Impeller
Psb = Ps + .25(Pd-Ps)
Single Stage, Double Suction Pumps

The single stage, double suction impeller is
placed between bearings while the seal
chambers are located adjacent to the suction
eyes of the impeller. The stuffing box pressure
is equal to the suction pressure.
Psb = Ps
Multi-Stage Pumps
Multi-stage pumps inherently have higher discharge pressures,
but low to medium stuffing box pressures due to impeller arrangement,
casing design, balance drums and the use of balance lines.
These multi-stage pumps can be mounted horizontally or vertically.
Two Stage Horizontal Pumps

Impeller arrangement can have two configurations:
1. Back to Back
In this arrangement, the seal chambers are
located adjacent to the suction eye of the impeller.
One chamber will see suction pressure and the
other will see first stage discharge pressure.
2. Eye to Eye
In this arrangement the seal chambers are
located adjacent to the backside of the impeller.
One chamber will see the discharge of the first
stage and the other will see pump discharge
pressure (second stage discharge).
Multi-Stage Horizontal Pumps
Multi-stage Boiler Feed Pumps are used to
develop high pressures, but the seal chamber
is not necessarily at a high pressure. These
pumps have a low pressure chamber (suction
pressure) and a higher-pressure chamber
(pressure between suction and discharge).
Psb1 = Ps+.5(Pd-Ps)
Psb2 = Pd
Psb1 = Ps
Psb2 = Ps+5 bar g
NOTE: If pump tolerances are not in check,

and in the absence of a balance line the
higher-pressure chamber will be a pressure
between suction and discharge pressure.
Psb2 = Ps+.5(Pd-Ps)
Mulit-Stage Vertical Pumps (Can or Turbine)

In these pumps the seal chamber is located
at the discharge elbow. Therefore the seal
chamber pressure would see discharge pressure.
Psb = Pd
Psb = Ps+5 bar g
SHAFT SPEED CONVERSION TABLE
SHAFT DIA. (mm)
RPM
SURFACE SPEED ( Meters per sec.)
SURFACE SPEED ( Feet per min.)
Psb2 = Ps+.5(Pd-Ps)
Typically, a balance line is used to reduce

pressure in the higher pressure seal chamber.
Provided pump tolerances are in check, the
higher-pressure seal chamber is as follows:
NOTE : The installation of a bleed-off line can

reduce seal chamber pressure provided
pump tolerances are in check.
SHAFT SPEED CONVERSION CHART
Psb1 = Ps
SHAFT
mm
25
28
30
32
33
35
38
40
43
45
48
50
RPM
1450
M/S
1.9
2.1
2.3
2.4
2.5
2.7
2.9
3.0
3.3
3.4
3.6
3.8
2900
M/S
3.8
4.2
4.6
4.9
5.0
5.3
5.8
6.1
6.5
6.8
7.3
7.6
SHAFT
mm
55
60
65
70
75
80
85
90
95
100
110
120
1450
M/S
4.2
4.6
4.9
5.3
5.7
6.1
6.5
6.8
7.2
7.6
8.3
9.1
FORMULAS:
Head ( m) =
Pressure (bar) x 9.8

mm Hg. x 0.0014
=
SG
SG
Pressure (bar) =
Mm of Mercury =
SHAFT DIA. (Inches)
Use formulas below to determine

approximate shaft speeds if not shown in chart above.
M/S = Dia. millimeters x R.P.M.
FPM = Dia. inches x R.P.M.
18750
4
Power (kW) =
5-2
Head (m) x SG
9.8
Head (m) x SG
0.0014
Q (l/min) x Head (m) x SG

efficiency x 6128
2900
M/S
8.3
9.1
9.9
10.6
11.4
12.1
12.9
13.7
14.4
15.2
16.7
18.2

Reference
UNITS OF MEASURE
Mariners Measure
6 Feet = 1 Fathom
120 Fathoms = 1 Cable Length (U.S.N.)
8.439 Cable Lengths = 1 Nautical Mile
6076.12 Ft = 1 Nautical Mile
1 Nautical Mile = 1.15 Statute Mile (International)
Inch System Conversion
Inches
x
Feet
x
Yards
x
Miles
x
Miles
x
Millimeters
x
Centimeters
x
Meters
x
Meters
x
Meters
x
Kilometers
x
Sq. Centimeters
x
Sq. Meters
x
Sq. Meters
x
Cubic Centimeters
x
Cubic Inches
x
Liters
x
Gallons
x
Cubic Meters
x
Cubic Yards
x
0.0254
0.305
0.914
1609.
1.609
0.03937
0.3937
39.37
3.281
1.094
0.621
0.155
10.764
1.186
0.061
16.2
0.2642
3.78
1.308
0.765
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
Metric System Prefixes

Mega = 1,000,000
Deci = 0.1
Kilo = 1,000
Centi = 0.01
Hecto = 100
Milli = 0.001
Deka = 10
Micro = 0.000001
Length
1 centimeter
1 meter
1 kilometer
1 inch
1 foot
1 mil
Square Measure
1 sq. cm.
1 sq. meter
1 sq. kilometer
1 sq. inch
1 sq. foot
1 sq. yard
1 sq. mile
1 circular mil
1 sq. inch
=
=
=
=
=
=
Meters
Meters
Meters
Meters
Kilometers
Inches
Inches
Inches
Feet
Yards
Miles
Square lnches
Square Feet
Square Yards
Cubic lnches
Cubic Centimeters
Gallons
Liters
Cubic Yards
Cubic Meters
Tera ( T ) = 1012
Giga (G) = 10 9
Nano (N) = 10 -9
Pico (P) = 10 -12
0.3937 inch
39.37 inches
0.62137 mile
2.54 centimeters
0.3048 meter
0.001 inch
= 0.1550 sq. in
= 1.196 sq. yd.
= 0.386 sq. mile
= 6.452 sq. centimeters
= 929.03 sq. cm.
= 0.8361 sq. meter
= 2.59 sq. kilometers
= 0.7854 sq. mil
= 1,000,000 sq. mils
= 0.0328 foot
= 1.0936 yards
= 3280 feet
= 10.764 sq. ft.

= 0.092903 sq. meter
Cubic Measure
1 cu.centimeter = 0.061 cu.inch 1 cu.in. = 16.39 cu cm.
1 cu. meter = 1.308 cu. yards = 35.316 cu. feet.
1 gallon (U.S.) = 231 cubic inches
1 cu. ft. = 7.48 gallons 1 liter = 1,000 cu. centimeters
Time
1 day = 86,400 seconds 1 year = 8,760 hours (approx.)
Velocity
1 ft./sec = 0.3048 meter/sec
1 ft./min = 0.00508 meter/sec
1 mile/hr = 0.4470 meter/sec
1 kilometer/hr = 0.2778 meter/sec
Acceleration
1 ft/sec/sec
1 mile/hr/sec
1 kilometer/hr/sec
Standard gravitation
=
=
=
=
=
=
1 meter/sec = 3.281 ft./sec

1 meter/sec = 196.9 ft./min
1 meter/sec = 2.237 mi/hr
1 meter/sec = 3.60 km/hr
0.3048 meter/sec/sec
9.806 meters/sec/sec
980.6 cm/sec/sec
32.2 ft/sec/sec
Mass
1 slug
= 32.2 pounds mass = 14.606 kilograms
1 pound mass = 453.6 grams
Force
1 pound force
1 dyne
1 newton
1 pound force
1 newton
1 gram force
=
=
=
=
=
=
1 slug
1 gram
1 kilogram
4.452 newtons
100,000 dynes
980.6 dynes
x 1 foot sec/sec
x 1 centimeter/sec/sec
x meter/sec/sec
= 0.224 pound force
Pressure
1 atmosphere = 14.69 pounds/sq. inch = 29.92 in. of Hg.
= 76 cm of Hg. = 33.9 ft. of water
1 in Hg. =0.491 pounds/sq. inch
Water pressure pounds/sq. inch = head in ft. x 0.434
Torque
Torque is the product of force and perpendicular distance.
1 Ib.-ft. = 1.356 newton-meter = 1.356 joule/radian
1 Ib.-ft. = 1.356 x 10 7 dynes-centimeter
1 Ib.-ft. = 1.383 x 10 4 grams-centimeter
1 Ib.-ft. = 192 ounce-inches
Work and Energy - Mechanical
1 erg = 1 dyne x 1 centimeter
1 joule = 1 newton x 1 meter = 105 dynes x 10 2 cm = 107 ergs
1 ft.-lb = 1 pound force x 1 foot = 1.356 joules
Work and Energy - Heat Equivalent
1 Btu raises 1 pound of water 1F
1 gram calorie raises 1 gram of water 1C
1 Btu = 252 gram calories = 778.3 ft.-lb. = 1054.8 joules
1 gram calorie = 0.003964 Btu = 4.184 joules
1 horsepower hour = 2545 Btu
Work and Energy - Electrical Equivalent
1 joule = 1 watt x 1 second = 1 amp (dc) x 1 volt (dc) x 1 sec.
W (joules) = 1/2 L (henries) x 1 (amperes)2
W (joules) = 1/2 C (farads) x E (volts) 2
1 kilowatt hour = 3,600,000 joules
Power
1 watt = 1 joule/sec.
1 horsepower = 550 ft. Ib./sec. = 746 watts
1 watt = 3.413 Btu/hr = 0.239 gram calorie/sec.
P watts = R (ohms) x 1 (amperes) 2
E (volts) 2
P watts =
R (ohms)
Angles
1 circle = 2 radians = 360 degrees
1 degree = 0.01745 radians
1 radian = 57.3 degrees
Geometric Figures
r = radius
Circle, area of = D 2 x 0.7854 = 2
Circle, circumference of = D or 2r
Sphere, area of = D 2 = 4r 2
D = diameter
Sphere, volume of = D 3 x 0.5236 = 4/3 r 3
Triangle, area of = 1/2 altitude x base
Cone, volume of = area of base x 1/3 altitude
Trapezoid, area of = 1/2 (sum of parallel sides) x altitude
Pyramid, volume of = area of base x 1/3 altitude
Miscellaneous Constants
= 3.14159
e = 2.71828
Loge X = 2.30259 log10 X
Electronic charge = 4.5 x 10 -10 e.s.u. = 1.60 x 10-20 e.m.u.
Mass units = 1.07 x 10-3 x Mev = 6.71 x 10 2 ergs
Speed of light = 3 x 108 meters/second
Speed of sound = (in air at sea level) = 1100 ft/second
CHESTERTON
Mechanical Seal Guide
Metric
Contact your
local CHESTERTON
Sealing Specialist for
precise system recommendations
Let us help you identify opportunities for
cost-savings and greater efficiency at your plant.
Distributors can be found at our distributor locator
on our website ( www.chesterton.com ).
CHESTERTON Product Specialists
and Applications Support
Value is defined by more than just the quality
of the product. We want to make sure that all
of our customers needs and expectations for
quality and value are met, and met completely.
CHESTERTON Specialists are a vital component
of this commitment. These factory-trained, dedicated
people will learn the specific requirements of your
plant to tailor recommendations and achieve
targeted results. They can assist in the development
of cohesive maintenance programs that increase
efficiency, performance and productivity.
When you see CHESTERTON,

you see the future of sealing.
Throughout the world CHESTERTON Technical Specialists
are working with plant managers and maintenance
engineers to reduce downtime, reduce operating costs,
and improve productivity.
The names of actual companies and products mentioned herein may be the trademarks of their respective owners.
DISTRIBUTED BY:
Middlesex Industrial Park, 225 Fallon Road

Stoneham, Massachusetts 02180 -9101 USA
Telephone: 978-469-6446 Fax: 978-469-6594
www.chesterton.com
A. W. CHESTERTON CO., 2003. All rights reserved.
Registered trademark owned and licensed by
A. W. CHESTERTON CO. in USA and other countries.
FORM NO. 071399 REV. 2
PRINTED IN USA 01/03

SealGuideMetric PDF

Uploaded by

Copyright:

Available Formats

SealGuideMetric PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SealGuideMetric PDF

Uploaded by

Copyright:

Available Formats

CHESTERTON

Mechanical Seal Guide

Chesterton Mechanical Seal Guide

At ambient conditions, these materials are equally

Section 1, Product Overviews, covers the key features

Section 4, Environmental Control Plans,

Section 2, Mechanical Seal Technical Data,

Section 5,Technical Reference, contains useful

Before applying a Chesterton mechanical seal

Chesterton Mechanical Seal Guide

Chesterton Mechanical Seal Guide

Chesterton Mechanical Seal Guide

180 High Reliability

280 Heavy Duty

A heavy duty single seal for maximum

A heavy duty dual seal for greatest reliability

Patented Self-Centering Lock Ring

Cushioned high strength drives

Chesterton Mechanical Seal Guide

Migration of advanced Chesterton technology

Designed to survive in the harsh, but real-life

* Adjustable Gland is a trademark of A.W. Chesterton Co.

Chesterton Mechanical Seal Guide

155 Single Cartridge Seal

255 Dual Cartridge Seal

A versatile single seal for use

A general duty, dual seal for plant wide use.

Geometric double balance

* Unified Seal Face Alignment and Self-Centering Lock Ring

Chesterton Mechanical Seal Guide

442 Split Mechanical Seal

4400 Gas Seal

A high performance split seal for universal

A compact cartridge design that uses

Ball and socket O-rings

Fluid sealing on the O.D. of the seal faces

Chesterton Mechanical Seal Guide

High quality in an economical seal.

Fits most DIN, ISO and ANSI standard pumps

Operates at pressures up to 42 bar g

Upgrade from single spring component seals

Chesterton Mechanical Seal Guide

Chesterton Mechanical Seal Guide

442M Split Mixer Seal

280M Mixer Seal

With its enhanced radial and axial motion

The 280M spring load is not affected

Ball and socket O-rings

Narrow rotating seal faces

Chesterton Mechanical Seal Guide

186HT High Temperature

886HT High Temperature

Cartridge seal designed to fit standard

Fits most DIN, ISO, ANSI and API pumps.

Easily upgrades OEM component seals

Chesterton Mechanical Seal Guide

Reduce seal water consumption

The Chesterton DualFlow Meter regulates

Conical, self-cleaning indicators