torque-speed-power

Hysteresis, Eddy-Current and

Powder Absorption Dynamometers
Torque Transducers
High Performance Dynamometer
Controllers
Power Analyzers
Motor Testing Software
Custom Motor Test Systems

Torque Transducers
TM 316 In-Line
Torque
Transducer
Model 3410

TF Torque
Flange Sensor

Torque Transducer Displays

TF Torque
Flange Sensor

TM, TMHS & TMB In-Line Transducers

Magtrol's In-Line Torque Transducers deliver precise
torque and speed measurement over a very broad
range. Each model has an integrated conditioning
electronic module providing 0 to 10 VDC torque
output and an open collector speed output. All TM
In-Line Transducers employ Magtrols unique noncontact differential transformer torque measuring
technology which makes them very reliable, providing
high overload protection, excellent long-term stability
and high noise immunity.

TF Torque Flange Sensors

Based on strain-gauge technology, the TF Sensors
precise telemetry system enables highly accurate
signal transmission between its measuring flange, HF
transmitter and receiver/conditioner. With a compact,
bearingless, maintenance-free design, the TF Torque
Flange Sensor brings many appealing advantages to
torque measurement applicationsmost notably, the
TFs insusceptibility to signal interference, axial and
radial misalignment, noise and shocks. Another key
benefit is the sensors high rigidity which supports
direct mounting on the machine shaft or flange,
avoiding the use of couplings on one side.

Model #s
TM

TF

301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
-------

----------------209
210
211
212
213
214
215
216
217
218
219
220

Nominal
Rated Torque

Magtrol offers two different torque displays: Model 3410 for all
TM/TMHS/TMB and TF Transducers and Model 6400. Both
units supply power to the transducer and display torque, speed and
mechanical power. Features include:
Adjustable English, Metric
Tare Function
and SI Torque Units
RS-232 Interface
Large, Easy-to-Read Vacuum
Torque and Speed Outputs
Fluorescent Display
Closed-Box Calibration
Built-In Self-Diagnostic Tests
Includes Torque 1.0
Overload Indication
Software
The Model 6400 Display (for TM series only) has the following
additional features:
IEEE-488 Interface
Pass/Fail Torque, Speed and
Power Testing Capabilities
Auxiliary Analog Input

Torque 1.0 Software

Magtrols Torque 1.0 Software is an easy-to-use Windows
executable program, used to automatically collect torque, speed
and mechanical power data. The data can be printed, displayed
graphically or quickly saved as a Microsoft Excel spreadsheet.
Standard features of Torque 1.0 include:
Measured Parameter vs. Time
Peak Torque Capture
Adjustable Sampling Rates
Multi-Axes Graphing
Polynomial Curve Fitting

Test Configuration

Torque Transducer Ratings

TMB Series
TM Series

Data Graph

TMHS Series

Basic Accuracy
High Accuracy
High Speed & Accuracy
Accuracy Max. Speed Accuracy Max. Speed Accuracy Max. Speed
Nm
lbft
Class
Class
Class
rpm
rpm
rpm
0.1
0.07
N/A
0.2%
20,000
N/A
0.2
0.15
N/A
< 0.1%
20,000
N/A
0.5
0.37
< 0.15%
6,000
< 0.1%
20,000
< 0.1%
40,000
1
0.7
< 0.15%
6,000
< 0.1%
20,000
< 0.1%
50,000
2
1.5
< 0.15%
6,000
< 0.1%
20,000
< 0.1%
50,000
5
3.7
< 0.15%
6,000
< 0.1%
20,000
< 0.1%
50,000
10
7.4
< 0.15%
6,000
< 0.1%
20,000
< 0.1%
50,000
20
15
< 0.15%
6,000
< 0.1%
20,000
< 0.1%
50,000
20
15
< 0.15%
4,000
< 0.1%
10,000
< 0.1%
32,000
50
37
< 0.15%
4,000
< 0.1%
10,000
< 0.1%
32,000
100
74
< 0.15%
4,000
< 0.1%
10,000
< 0.1%
32,000
200
148
< 0.15%
4,000
< 0.1%
10,000
< 0.1%
24,000
500
369
< 0.15%
4,000
< 0.1%
10,000
< 0.1%
24,000
1,000
738
N/A
< 0.1%
7,000
< 0.1%
16,000
2,000
1,475
N/A
< 0.1%
7,000
< 0.1%
16,000
5,000
3,688
N/A
< 0.1%
5,000
< 0.1%
12,000
10,000 7,375
N/A
< 0.15%
5,000
< 0.15%
12,000
20,000 14,751
N/A
N/A
N/A
50,000 36,878
N/A
N/A
N/A
100,000 73,756
N/A
N/A
N/A

TF Series

Torque Flange Sensor

Accuracy Max. Speed*
Class
rpm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
< 0.1%
14,000
< 0.1%
14,000
< 0.1%
14,000
< 0.1%
14,000
< 0.1%
8,000
< 0.1%
8,000
< 0.1%
8,000
< 0.1%
4,000
< 0.1%
4,000
< 0.25%
1,500
< 0.25%
1,500
< 0.30%
1,500

* High speed versions on request.

Motor Test Equipment

Motor Testing Software

M-TEST 5.0

Magtrols M-TEST 5.0 is a state-of-the-art motor testing program

designed for use with Windows operating systems for PC-based data
acquisition. Used in conjunction with Magtrols Motor Testing Equipment,
M-TEST5.0 is equipped with ramp, curve and manual testing capabilities
to help determine the performance characteristics of a motor under test,
and also provides pass/fail testing for production line and inspection
applications. The data generated can be stored, displayed and printed
in tabular or graphic formats, and is easily imported into a spreadsheet.
M-TEST 5.0 is ideal for simulating loads, cycling the unit under test
and motor ramping. Magtrol can also make custom modifications to the
software to meet your specific motor testing needs.

New Features

Temperature Measurement
Capability is Now Included
in Standard Program
Tabbed Interface for Quick
Navigation
More Graphing Options
Simplified PID Scaling
Automatic GPIB Device/
Address Detection
Multiple Language Support
Single/Multi-User Login
with Password Protection

Other Features

Displays 22 Tested and

Calculated Parameters
Pass/Fail Testing
Automatically Loads Default
Test Instrument Parameters
Motor Shaft Direction Indicator
IEEE-488 & RS-232 Interface
Three-Phase Power Analyzer
Data Acquisition
Curve Fitting
Customized Reports
Report Saving and Recall

Overlay data from two separate tests

Cursor tools for plot analysis

Sensor Input Measurement

M-TEST 5.0 is capable of reading and monitoring up to 32 thermocouples or analog sensors

during a motor test. Perform heat rise curves on the bearings, windings and housing of a
motor, or measure air flow/exhaust efficiencies with an air tool or internal combustion engine.
M-TEST 5.0, with its complete dynamometer control, even allows for sensor measurement
while performing load simulation for duty cycle and life testing.

Custom Motor Test Systems

Magtrols Customized Motor
Test Systems (CMTS) are
PC-based, turnkey systems
custom designed and built
to meet your specific
requirements.

CMTS Component Options

Custom Test Stand, Table or Cabinet
One or More Dynamometers
Programmable Dynamometer Controller
Power Analyzer
Customized Software
Motor Power Supply (AC and/or DC)
Personal Computer and Printer
GPIB Cards & Cables
Motor Fixturing
Safety Guards
Multiple Point Temperature Measurement
Cooling System
Calibration Weights
On-Site Services: commissioning & training

DYNAMOMETERS
1 WB 65-HS
Dynamometer

HYSTERESIS DYNAMOMETERS
Maximum Torque Range

Model

Magtrol offers three types of

dynamometer brakes to absorb
load: Hysteresis, Eddy-Current
and Magnetic Powder. Each
type of Dynamometer has
advantages and limitations and
choosing the correct one will depend
largely on the type of testing to be
performed. Magtrol sales professionals are
readily available to assist in selecting the proper
dynamometer to meet your testing needs.

Hysteresis Brake Dynamometers

Magtrol
HD-400
Dynamometer
shown with
Adjustable Motor
Fixture, Coupling
and DC Motor

HD

Hysteresis Brake Dynamometers (HD series) are versatile and ideal

for testing in the low to middle power range (max. 14 kW intermittent
duty). Hysteresis Brakes do not require speed to create torque, and
therefore can provide a full motor ramp from free-run to locked rotor.
Brake cooling is provided by convection (no external source) or by
air (compressed air or dedicated blower) depending on the model.
Hysteresis Dynamometers have both continuous and intermittent
power ratings where the dynamometer is capable of dissipating more
power for shorter periods of time. All Hysteresis Dynamometers have
accuracy ratings of 0.25% to 0.5% full scale, depending on size
and system configuration. Also available are special designs for small
engine and high-speed motor testing.

Eddy-Current Brake Dynamometers WB

Eddy-Current Brake Dynamometers (WB series) are ideal for applications
requiring high speeds and also when operating in the middle to high
power range. Eddy-Current Brakes provide increasing torque as the speed
increases, reaching peak torque at rated speed. The Dynamometers have
low inertia as a result of small rotor diameter. Brake cooling is provided by
a water circulation system, which passes inside the stator to dissipate heat
generated by the braking power. The water cooling in the WB provides
high continuous power ratings (max. 140 kW). The WB Dynamometers
have typical accuracy ratings of 0.3% to 0.5% full scale (2% for WB
2.7), depending on size and system configuration.

Powder Brake Dynamometers

PB

Powder Brake Dynamometers (PB series) are ideal for applications

operating in the low to middle speed range or when operating in the
middle to high torque range. Like Hysteresis Brakes, Powder Brakes
provide full torque at zero speed. Like the Eddy-Current Brake
Dynamometers, the PB series is water-cooled, allowing for power
ratings up to 48 kW. The PB Dynamometers have typical accuracy
ratings of 0.3% to 0.5% full scale (2% for PB 2.7), depending on
size and system configuration.

Tandem Dynamometer

Magtrol offers Eddy-Current and Powder Dynamometers mounted in

tandem. In tandem, the unique features of each type of dynamometer
brake are utilized, allowing nominal braking torque to be applied to
the unit under test from zero speed to maximum rotation. The Tandem
Dynamometers are available on a number of PB/WB combinations.

HD-106
HD-100
HD-400
HD-500
HD-510
HD-505
HD-515
HD-700
HD-710
HD-705
HD-715
HD-800
HD-810
HD-805
HD-815
HD-825

English
2.5 ozin
11 ozin
40 ozin
120 ozin
120 ozin
240 ozin
240 ozin
440 ozin
440 ozin
55 lbin
55 lbin
125 lbin
125 lbin
250 lbin
250 lbin
500 lbin

Metric
180 gcm
800 gcm
2.8 kgcm
8.5 kgcm
8.5 kgcm
17 kgcm
17 kgcm
31 kgcm
31 kgcm
62 kgcm
62 kgcm
140 kgcm
140 kgcm
280 kgcm
280 kgcm
565 kgcm

SI
18 mNm
80 mNm
280 mNm
850 mNm
850 mNm
1.7 Nm
1.7 Nm
3.1 Nm
3.1 Nm
6.2 Nm
6.2 Nm
14.0 Nm
14.0 Nm
28.0 Nm
28.0 Nm
56.5 Nm

Power Ratings
Maximum
5 minutes continuous Speed*
W
W
rpm
35
7
30,000
75
20
25,000
200
55
25,000
400
80
25,000
750
375
25,000
800
160
25,000
1,500
900
25,000
700
150
25,000
1,500
935
25,000
1,400
300
25,000
3,400
3,000
25,000
2,800
1,800
12,000
3,500
3,000
12,000
5,300
3,000
12,000
7,000
6,000
12,000
14,000
12,000
8,000

* Higher speeds available on request.

EDDY-CURRENT DYNAMOMETERS
Rated Rated
Speed Power

Rated Torque
Model
1 WB 2.7
2 WB 2.7
3 WB 2.7
4 WB 2.7
1 WB 23
1 WB 43
2 WB 43
1 WB 65
2 WB 65
1 WB 115
2 WB 115
1 WB 15
2 WB 15
3 WB 15
4 WB 15

English

Metric

SI

rpm

kW

21 ozin
43 ozin
64 ozin
85 ozin
N/A
212 ozin
425 ozin
89 lbin
177 lbin
443 lbin
885 lbin
1239 lbin
2478 lbin
3717 lbin
4957 lbin

1.5 kgcm
3 kgcm
4.5 kgcm
6 kgcm
N/A
15 kgcm
30 kgcm
100 kgcm
200 kgcm
500 kgcm
1000 kgcm
1400 kgcm
2800 kgcm
4200 kgcm
5600 kgcm

0.15 Nm
0.3 Nm
0.45 Nm
0.6 Nm
0.08 Nm
1.5 Nm
3 Nm
10 Nm
20 Nm
50 Nm
100 Nm
140 Nm
280 Nm
420 Nm
560 Nm

15,915
15,915
15,915
15,915
20,000
9,550
9,550
5,730
5,730
2,865
2,865
2,390
2,390
2,390
2,390

0.25
0.50
0.75
1.00
0.30
1.50
3
6
12
15
30
35
70
105
140

Maximum Speed
rpm
standard high-speed
version version (HS)
50,000
70,000
50,000
70,000
50,000
70,000
50,000
70,000
100,000 NEW
50,000
65,000
50,000
65,000
30,000
50,000
30,000
50,000
18,000
22,000
18,000
22,000
7,500
N/A
7,500
N/A
7,500
N/A
7,500
N/A

POWDER DYNAMOMETERS
Model
1 PB 2.7-8
2 PB 2.7-8
4 PB 2.7-8
1 PB 2.7-8K
2 PB 2.7-8K
4 PB 2.7-8K
1 PB 43
2 PB 43
1 PB 65
2 PB 65
1 PB 115
2 PB 115
1 PB 15
2 PB 15
4 PB 15

Rated Torque
English
85 ozin
170 ozin
340 ozin
85 ozin
170 ozin
340 ozin
44 lbin
89 lbin
221 lbin
442 lbin
885 lbin
1,770 lbin
2,655 lbin
5,311 lbin
10,621 lbin

Metric
SI
6 kgcm 0.6 Nm
12 kgcm 1.2 Nm
24 kgcm 2.4 Nm
6 kgcm 0.6 Nm
12 kgcm 1.2 Nm
24 kgcm 2.4 Nm
50 kgcm
5 Nm
100 kgcm
10 Nm
250 kgcm
25 Nm
500 kgcm
50 Nm
1,000 kgcm 100 Nm
2,000 kgcm 200 Nm
3,000 kgcm 300 Nm
6,000 kgcm 600 Nm
12,000 kgcm 1200 Nm

Rated
Speed
rpm
320
320
320
2390
2390
2390
955
955
570
570
480
480
382
382
382

Rated
Power
kW
0.02
0.04
0.08
0.15
0.30
0.60
0.50
1.00
1.50
3
5
10
12
24
48

Maximum
Speed
rpm
3,000
3,000
3,000
10,000
10,000
10,000
4,000
4,000
3,000
3,000
3,000
3,000
2,000
2,000
2,000

Dynamometer Controllers
DSP6001 High-Speed Programmable Controller

Standard Features

Fast Full-Curve Data Acquisition

Speed & Torque Operating Modes (Open or Closed Loop)
Single Point or Programmed Load Control
Torque and Speed Analog Output
Closed-Box Calibration of Torque & Auxiliary Input
Thermal Alarm Input

High-Speed Data Acquisition

Programmable Digital PID Values
RS-232 and IEEE-488 Interfaces
Vacuum Fluorescent Readout
19 Rack Mounts with Handles

6200 Open-Loop Controller

Magtrols Model 6200 is an open-loop controller with a high-quality vacuum fluorescent display. The unit
provides open-loop control of HD Series Dynamometers via an internal current regulated power supply. The
Model 6200 displays torque, speed and mechanical power values of the motor under test. Instead of mechanical
power, the unit can display an auxiliary transducer reading via the 5 VDC analog input. The displayed values
can be stored internally or output via the RS-232 or IEEE-488 interfaces.

Standard Features

High-Quality, Easy-to-Read Display

Internal Data Storage
Open-Loop Dynamometer Control
Dynamometer Overload Protection

Auxiliary 5 VDC Analog Input for Additional Transducer

Pass/Fail Motor Testing Capability
RS-232 and IEEE-488 Interfaces
19 Rack Mounts with Handles

Power Analyzers
Models 6510e and 6530 High-Speed Power Analyzers
The Magtrol 6510e Single-Phase and 6530 Three-Phase
Power Analyzers are easy-to-use instruments ideal for
numerous power measurement applications. Both power
analyzers provide extremely fast data transfer rates, up
to 100 per second, which makes them ideal for both
static and dynamic tests. From DC to 100 kHz AC, the
6510e and 6530 measure volts, amps, watts, volt-amps,
frequency, crest factor, Vpeak, Apeak and power factor in one convenient display.
At the core of the unit is a Digital Signal Processor capable of processing over 40 million instructions per
second (10million per second for the 6510e). Both units are equipped with an easy-to-read customizable
vacuum fluorescent display and an optional plug-in module that provides up to 12 channels of analog output
(3 channels for Model 6510e).

Standard Features

Easy Setup and High-Quality, Easy-to-Read Display

Ranges: Up to 600 Vrms @ 20 A continuous duty
Accuracy: Up to 0.1%
Bandwidth: DC up to 100 kHz
Input Power: Accepts 120/240 Vrms,
60/50 Hz power at 20 VA max

Measurement: Continuous or Cycle-by-Cycle

Average, Peak and Inrush Capabilities
RS-232 and IEEE-488 Interfaces
External Shunt Input
19 Rack Mounts with Handles

Electronics

Magtrols Model DSP6001 Programmable Dynamometer

Controller employs state-of-the-art Digital Signal
Processing technology to provide superior motor testing
capabilities. Designed for use with any Magtrol HD,
WB or PB Dynamometer; Magtrol In-Line Torque
Transducer; or auxiliary instrumentation, the DSP6001
can provide complete PC control via IEEE-488 or
RS232 interface. Two channels enable the unit to
support a combination of up to two independently configured testing instruments. With up to 100 readings per
second, the DSP6001 is ideally suited for both the test lab and the production line.

NEW Products
Micro Dyne System
With over 50 years experience in dynamometer design and torque measurement, Magtrol
has revolutionized the industry once again. Magtrols new Micro Dyne, capable of
measuring extremely low torques (2.0 mNm can be resolved to 0.0004mNm), is designed
exclusively for testing miniature and micro (low-torque) motors.
For the utmost convenience, the Micro Dyne is packaged as a COMPLETE MOTOR
TESTING SYSTEM. Everything that is needed to accurately and efficiently test miniature
motors and micro motors is included with the purchase of a Magtrol Micro Dyne. The
only component that needs to be supplied by the customer is a laptop or desktop personal
computer and motor power supply.

System Components

Hysteresis Dynamometer
Torque: 2.0 mNm to 4.0mNm
Speed: up to 100,000 rpm
Motor Fixture: accommodates motors from
5 mm to 30 mm in diameter.
All-in-one dynamometer controller,
DC wattmeter, power relay and USB interface
MTEST 5.0
Calibration sotware and weights

AHB Series Compressed-air-cooled Hysteresis Brakes

When torque control/torque measurement
must be performed at the highest possible
power, Magtrol AHB Series Hysteresis
Brakes are ideal. Passages running through
the brakes enables compressed air cooling,
providing excellent heat dissipation. This
design allows for continuous power ratings
up to 3000 watts (5300 watts intermittent).
Use of pre-loaded bearings in the AHB
Series Hysteresis Brakes allows operation
at speeds of up to 25,000 rpm for extended
durations.

Basic Torque Measurement System

A cost-effective, basic motor test rig can be easily configured by mounting one or two
AHB Series Compressed-air-cooled Hysteresis Brakes onto a PT 25 Grooved Base Plate
with a TM Series In-Line Torque Transducer and couplings (as shown in the photo above).
Adding a FR10 Free-Run Speed Sensor, 3410 Torque Display or DSP6001 Controller
greatly expands the systems motor testing capabilities. Other accessories available from
Magtrol include: adjustable motor fixtures, power supplies, air filters, pressure gauge kits,
air lines, pipe fittings, jack shafts and risers.

For over 50 years, Magtrol

Inc and Magtrol SA have
been providing customers
with high quality products
to test, measure and control
torque-speed-power, loadforce-weight, tension and
displacement. Magtrol Inc,
headquartered in the USA,
is a leading manufacturer
of motor test equipment
and hysteresis brakes
and clutches. Magtrol SA,
located in Switzerland, also
offers motor test equipment
as well as transducers to
measure, monitor and
control load, force, weight
and displacement. Magtrol
offers customers a wide array
of test and measurement
solutions, combined with
excellent worldwide sales
and service.

Magtrol Inc

70 Gardenville Parkway
Buffalo, New York 14224 USA
Phone: +1 716 668 5555
Fax: +1 716 668 8705
E-mail: magtrol@magtrol.com

Magtrol SA

Due to the continual development of our products, we reserve the right

to modify specifications without forewarning.

TSP-US www 11/07

For more information, contact your local sales agent:

Centre technologique Montena

1728 Rossens/Fribourg, Switzerland
Phone: +41 (0)26 407 3000
Fax: +41 (0)26 407 3001
E-mail: magtrol@magtrol.ch
Subsidiaries in:
Germany France U.K. China
For worldwide network of sales
agents, visit our web site:

www.magtrol.com