B2-Lehe4748-01 - Emcp3.3
B2-Lehe4748-01 - Emcp3.3
B2-Lehe4748-01 - Emcp3.3
EMCP 3.3
GENERATOR SET
CONTROLLER
GENERAL DESCRIPTION
FEATURES/BENEFITS
OPERATOR INTERFACE
LEHE4748-01
EMCP 3.3
GENERATOR SET CONTROLLER
FEATURES/BENEFITS (CONTD)
STANDARDS
STANDARD FEATURES
CONTROLS
Auto/Start/Stop
Engine Cool-Down Timer
Emergency Stop
Engine Cycle Cranking
Lamp Test
Generator Voltage (w/CDVR)
Engine Speed/Generator Frequency
(Electronic Engines Only)
COMMUNICATION
ENVIRONMENTAL SPECIFICATIONS
LEHE4748-01
UL 508 Listed
CSA C22.2 No.100,14, 94
Complies with all necessary standards for
CE Certification
98/37/EC Machinery Directive
BS EN 60204-1 Safety of Machinery
89/336/EEC EMC Directive
BS EN 50081-1 Emissions Standard
BS EN 50082-2 Immunity Standard
73/23/EEC Low Voltage Directive
EN 50178 LVD Standard
ISO3046, ISO8528
IEC529, IEC60034-5, IEC61131-3
MIL STND 461
2
2
EMCP 3.3
GENERATOR SET CONTROLLER
WARNING/SHUTDOWN INDICATION
Overcrank
Low Coolant Temperature Warning
High Coolant Temperature Warning/Shutdown
Loss of Coolant Warning/Shutdown
Low Oil Pressure Warning/Shutdown
Overspeed
Control Switch Not In Auto
High/Low Battery Voltage
Emergency Stop Activated
Also available with Electronic Engines*:
Low Fuel Pressure Warning/Shutdown
High Fuel Pressure Warning/Shutdown
Fuel Filter Restriction Warning/Shutdown
High Intake Manifold Air Temperature
Warning/Shutdown
High Oil Temperature Warning/Shutdown
Notes:
Warning condition activates common alarm
output signal and common flashing yellow
indicating lamp.
Shutdown condition activates common alarm
output signal and common flashing red
indicating lamp.
Warning/Shutdown conditions result in text
message on EMCP 3 display.
LEHE4748-01
EMCP 3.3
GENERATOR SET CONTROLLER
308 mm
247 mm
57 mm
Hungarian
Icelandic
Italian
Japanese
Norwegian
Portuguese
Russian
Swedish
Spanish
LEHE4748-01
EMCP 3.3
GENERATOR SET CONTROLLER
OPTIONS
ANNUNCIATOR
The EMCP 3 Annunciator serves to display Genset
system alarm conditions and status indications.
The Annunciator has been designed for use on
the J1939 Communication Network and may be
used in either Local (package mounted) or Remote
(up to 800 feet) application. A maximum of three (3)
Annunciators may be used with a single EMCP 3.3.
LEHE4748-01
EMCP 3.3
GENERATOR SET CONTROLLER
RTD MODULE
The RTD module serves to provide expandable
engine and generator temperature monitoring
capability of the EMCP 3 and is capable of reading
up to 8 RTD inputs. The RTD Module has been
designed for use on the J1939 Communication
Network and may be used in either Local (package
mounted) or Remote (up to 800 feet) application.
A maximum of one (1) RTD Module may be used
with a single EMCP 3.3.
THERMOCOUPLE MODULE
The Thermocouple module serves to provide
expandable engine and generator temperature
monitoring capability of the EMCP 3 and is
capable of reading up to twenty (20) Type J
or K Thermocouple inputs. The Thermocouple
Module has been designed for use on the J1939
Communication Network and may be used in either
Local (package mounted) or Remote (up to 800 feet)
application. A maximum of two (2) Thermocouple
Modules may be used with a single EMCP 3.3.
LEHE4748-01
EMCP 3.3
GENERATOR SET CONTROLLER
LEHE4748-01
EMCP 3.3
GENERATOR SET CONTROLLER
www.cat-ElectricPower.com
LEHE4748-01 (05-05)
2005 Caterpillar
All Rights Reserved.
Printed in U.S.A.