Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 782 views

    Cat Emcp2

    Uploaded by

    mahdi
    The document provides installation instructions for a Caterpillar EMCP2 monitor. It involves unpacking the monitor components, mounting the antenna on the generator roof and routing cables, attaching the monitor on a horizontal surface near the engine controller, connecting the monitor to the EMCP2 controller via a 5-wire connection, attaching the antenna cable to the monitor, and testing the monitor functions before contacting the manufacturer for login instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cat Emcp2

    Uploaded by

    mahdi
    782 views2 pages
    The document provides installation instructions for a Caterpillar EMCP2 monitor. It involves unpacking the monitor components, mounting the antenna on the generator roof and routing cables, attaching the monitor on a horizontal surface near the engine controller, connecting the monitor to the EMCP2 controller via a 5-wire connection, attaching the antenna cable to the monitor, and testing the monitor functions before contacting the manufacturer for login instructions.

    Original Description:

    EMCP II

    Original Title

    cat-emcp2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides installation instructions for a Caterpillar EMCP2 monitor. It involves unpacking the monitor components, mounting the antenna on the generator roof and routing cables, attaching the monitor on a horizontal surface near the engine controller, connecting the monitor to the EMCP2 controller via a 5-wire connection, attaching the antenna cable to the monitor, and testing the monitor functions before contacting the manufacturer for login instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    782 views2 pages

    Cat Emcp2

    Uploaded by

    mahdi
    The document provides installation instructions for a Caterpillar EMCP2 monitor. It involves unpacking the monitor components, mounting the antenna on the generator roof and routing cables, attaching the monitor on a horizontal surface near the engine controller, connecting the monitor to the EMCP2 controller via a 5-wire connection, attaching the antenna cable to the monitor, and testing the monitor functions before contacting the manufacturer for login instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Caterpillar EMCP2

    Installation Guide
    1. Unpack the monitor, antenna and the data / power cable. The
    25 pin connector plugs onto the front of the OMNIMETRIX
    Monitor. This cable includes wires to power the monitor as well
    as wires for alarm inputs, relay outputs and analog inputs.
    Take a moment to inspect all components to verify there is no
    shipping damage.
    2. Place the antenna on the roof of the generator and route the
    antenna cable through the louvers down into the area of the
    generator control. The antenna used for transmitting must be
    installed to provide a separation distance of at least 20 cm from
    all persons and must not transmit simultaneously with any other
    antenna transmitters. BE SURE to provide a drip loop lower
    than the monitor to keep water from running down the antenna
    cable into the monitor connection. If the roof is aluminum (nonmagnetic), simply mount the antenna near the roof line on the
    steel side walls.
    3. Attach the monitor via its magnetic feet, on top of the engine
    controller or other appropriate location. Horizontal surfaces are
    best, but the unit may be mounted vertically or even upside
    down if necessary.
    4. Route the data / power cable through the cable entry on the
    bottom of the generator control.
    5. The monitor connects to the Caterpillar EMCP 2 through a
    simple 5-wire connection. Connect the red wire to generator
    Battery B+, the black wire to generator Battery B- (GND), the
    orange wire to Run Relay Terminal 24, and the blue wire to
    Common Fault Relay Terminal 22. Connect the white/gray wire
    to the Alarm Module Terminal 2. If there is no Alarm Module,
    look for a terminal strip labeled ALM, and connect there. Use
    the 20K OHM Resistor Wire and connect it from ALM to
    generator B+ to provide the necessary pull-up voltage for the
    EMCP 2 Open Collector Drive in the ALM Terminal.
    6. Attach the antenna cable to the front of the monitor, and tighten
    thumb tight.
    7. Turn on the monitor and confirm that the LEDs light up and
    blink. If not, check for power on the terminal strip. If, after 5
    minutes, the only LED lit is the Power LED, check the antenna
    mount and cable connection.
    8. Allow 15 minutes for the monitor to log into the network and
    then call OMNIMETRIX at 770-209-0012 to confirm installation.
    Access to machine data is through the OmniView web
    interface at www.omnimetrix.net. Contact OMNIMETRIX for
    login instructions and web training.

    Data / Power Cable

    CAT EMCP 2 Controller

    CAT EMCP 2 Wiring

    If you have any questions, please call OMNIMETRIX Tech Support at 770-209-0012 or email at
    techsupport@omnimetrix.net.

    4295 Hamilton Mill Road, Suite 100 Buford, GA 30518


    www.omnimetrix.net 770-209-0012
    An Acorn Energy Company (NASDAQ:ACFN) www.acornenergy.com

    IM-011 Rev F
    July 2013

    You might also like