FA NEMAK Echocollect E

Figure 1: Nemak produces high-quality aluminum
components for the automotive industry
Central collection and analsis of production data increase productivity and quality
Optimized Die-Cast Aluminum Products

In order to continuously monitor and improve the production process, the production data of aluminum components is
centrally collected and analyzed. A key component of this solution is the echocollect data collection tool with its wide range
of interfaces.
Founded in 1979, Nemak is today the
world leading manufacturer of high-quality
aluminum components for the automotive industry. The product range comprises cylinder heads, engine blocks and
transmission parts made of die-cast aluminum alloys. The die-casting methods
employed vary depending on the product
and the manufacturing facility. Nemak
produces more than 50 million die-cast
aluminum products per year, e.g. for Audi,
BMW, Daimler, Ford, Mitsubishi, Porsche
or Volkswagen. Over 20,000 people are
employed worldwide at 35 manufacturing
facilities located in 14 different countries
in Europe, Asia, North and South America.
The Nemak corporation is part of the Alfa
Group and is headquartered in Mexico.
The objective: Continuous monitoring
and improvement
To achieve the technology, cost and quality objectives, the continuous monitoring
and improvement of the production process and product quality play a key role
at Nemak. The NORIS (Nemak Operation Realtime Information System) proj-
ect was thus launched to monitor, in particular, the quality and productivity of the
smelting and die-casting processes. This
is achieved by reading the relevant data
from the machines and facilities during
production, and storing the data directly
in a central SQL database system to allow subsequent analysis. The continuous
monitoring of the production process and
the early detection of faults enable Nemak to assess the potential for increasing
productivity and quality. The reduction of
manual posting processes and the associated cost savings are another important
aim of this project.
As a prerequisite to the project, the production facilities needed to be interfaced
to Nemaks database system. This was to
be done using a device which installed
inside the control cabinet collects the
data from the controllers, and writes it to
the database without requiring changes
to the PLC program. A special challenge
was the legacy machinery at the different
manufacturing facilities, which uses different PLCs and different interfaces.
Figure 2: echocollect offers numerous possibilities for data collection via serial and Ethernet
interfaces
Figure 3: A graphical configurator allows the assignment of PLC data to database entries
echocollect meets the data collection

requirements
After evaluating the available technologies for this key component, Nemak opted
for the echocollect product from Softing
Industrial Automation. In addition to PLCs
from Siemens and Allen Bradley, this data
collection tool supports serial and Ethernet interfaces to more than 50 other PLCs
or systems, such as the SINUMERIK
840D NC system. The data can be logged
in MySQL, MS SQL, Oracle, Sybase and
DB/2 databases. A graphical configurator
allows the assignment of PLC data to database tables and columns. If the network
fails, echocollect buffers the read data
with a timestamp on an SD card.
The potential of the NORIS project is clear
from the fact that the number of 50 million aluminum products manufactured
per year can be increased by 1%, or the
production costs can be reduced while
maintaining the same production volume.
Dr. Martin Schickmair, Head of Production Engineering and Lean Management,
summarizes the advantages of Softings
echocollect product for the Nemak manufacturing facility in Linz (Austria): With
its numerous interfaces and its functionality, the echocollect data collector is a
key component of our NORIS project and
directly contributes to the increases we
have achieved in productivity and quality.
http://industrial.softing.com
Author: Joerg Kubas, Head of Sales,
Softing Industrial Automation GmbH
German article published in elektrotechnik
Magazine, ed. 9/2013

FA NEMAK Echocollect E

Uploaded by

Copyright:

Available Formats

FA NEMAK Echocollect E

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FA NEMAK Echocollect E

Uploaded by

Copyright:

Available Formats

Figure 1: Nemak produces high-quality aluminum

components for the automotive industry

Optimized Die-Cast Aluminum Products

echocollect meets the data collection

You might also like