Ranger 500 1 PDF

RANGER 500
02250-1
2002-01-02
1/4
Technical description
Ranger 500 is a hydraulic, self-propelled, selfcontained, crawler based surface drilling rig equipped
with a cabin (F.O.P.S. and R.O.P.S.) and rod handling
system. It drills vertical, inclined or horizontal holes
with a diameter of 51 - 89 mm (2" - 3 1/2") utilizing 32,
38 or 45 mm (1 1/4", 1 1/2", or 1 3/4") extension rods.
Ranger 500 is equipped with HL 510, hydraulic top
hammer rock drill. With high rotation torque, sufficient
flushing and sophisticated ergonomic drilling control
system the rig is well suited also in very fractured rock
conditions. The rock drill and articulated boom are
mounted on the turnable superstructure giving a
2
drilling coverage of over 17 m (190 sq - ft).
Two variable displacement pumps and two gear
pumps are directly driven from one end of Caterpillar
diesel engine, while the compressor is powered from
the other end of the engine via cogged belt.
Powerpack is mounted crosswise at the rear end of the
superstructure to keep counterweight on the opposite
side of the boom and feed regardless of the drilling
direction.
SANDVIK TAMROCK reserves the right to change this specification without further notice.
PowerTrak Ranger 500 has an ergonomic cabin to

increase operator's safety and visibility. The cabin is
certified for R.O.P.S. (ISO-3471 Roll-Over protection
Structure) and F.O.P.S. (ISO-3449 Falling Object
Protection Structure). Windows are laminated for
added safety. The noise level in the cabin is less than
80 dB(A). To keep dust at a minimum, the cabin is
fitted with efficient filters for incoming fresh air.
Adjustable seat, good visibility, adequate lighting and
an optimum working temperature are among the many
features ensuring a good operating environment.
Drilling functions are proportionally controlled by one
hydraulic joy-stick. Several routine functions e.g.
antijamming are executed automatically. There are
fewer levers to make it easy to use. Driving, rear jack
and winch control can be done outside the cabin from
the optional remote control box.
Typical applications for Ranger 500 are road cutting,
pipe-line drilling and foundation drilling, as well as
production drilling in medium size quarries. Therefore
Ranger 500 is most often used by construction
contractors, mines and quarries, and also included in
the equipment fleet of rental houses as well.
SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND
Tel.int. +358 205 44 121, Telefax int. +358 205 44 120
RANGER 500
Spec. no: 02250-1
2002-01-02
2/4
Drilling geometry
Vertical drilling
90
30
Horizontal drilling, sideways
Transport dimensions
11000
7100

RANGER 500
Spec. no: 02250-1
2002-01-02
3/4
Hydraulic rock drill

Rock drill type
Drill rod diameters
Shank adapter
Operating pressure
Percussion rate
Percussion output power
Maximum rotation torque
Shank lubrication
Flushing
Weight
HL 510
32, 38, 45 mm
Standard
80-170 bar
60 Hz
15.5 kW
680 Nm/190 bar
Air / oil mist
Air
130 kg
Chain feed and rod handler

Chain feed type
Length of feed
Rock drill travel
Max. length of starter rod
Max. hole length with starter rod
Feed/pull out force
Travelling hose reel
Front jaws
Rod handler type
Storage capacity with MF-rods
Steel lengths
Max. hole depth
with 45 mm rods
Feed extension travel
Feed swing
Feed tilt
Weight without steels
CF 145H + RH 714
6 525 mm
4 200 mm
4 305 mm
3 600 mm
20 kN
Standard
Centralizing Pito 12H
RH 714
6+1
3 050 or 3 660 mm
25 m
1 350 mm
45
(45 with pin change)
125
1 200 kg
Articulated boom
Boom type
Boom length
Drilling coverage on flat
Collaring height
Horizontal holes
DB 700
4.8 m
2
17.6 m
+2.1 m/-5.0 m
Sideways, forwards
Carrier
Track type
Grouser plate width
Ground contact length
Ground pressure
Ground clearance
Turnable superstructure
Oscillation angles
Tramming force
Max. tramming speed
FL 6
310 mm
2 590 mm
2
0.75 kg/cm
440 mm
120
10
110 kN
3.5 km/h
Powerpack
Air flushing capacity

Flushing air pressure
Air cleaner
Fuel tank
Average fuel consuption
Fuel saving system
Weight
5.8 m /min
4-10 bar
2 pcs, with ejector and
safety element
260 l
14-21 l/h
Standard
1 150 kg
Hydraulic system
Driving, boom and drilling
Cooling and dust collector
Filtration rate
Cooling capacity
Hydraulic oil tank
Shank lubrication device
Load sensing system

Open center
12 micron abs., return
25 micron, pressure
up to +50C ambient
200 l
SLU 18-1
Control system
Driving control
Boom control
Drilling
Rod handler
Collaring control
Percussion control
Antijamming system
Voltage
Pilot operated, hydraulic

Direct operated, hydr.
Pilot controlled (el/hydr.)
Electric remote
Stepless
Controlled by feed
pressure (THC 700)
Hydraulic
24 VDC
Operator's cabin
Cabin type
Certificates
Noise level in the cabin
Controls
Heaters
Pressurization
Seat
Vibration dampening
Windows
Power take-off
Ergo
F.O.P.S. and R.O.P.S.
below 80 dB(A)
Drilling, tramming, boom
and rod changer
Standard
Standard
Multiposition
Standard
Safety laminated, tinted,
with wipers
12 VDC
Dust collection system

Dust collector type
Capacity/vacuum
Filter elements/material
Total filter surface
Hydraulic motor output
Weight
DC 700H
3
23 m /min at 1 000 mm
vacuum H2O
10 pcs/fiber
2
8m
12 kW
190 kg
Transport dimensions
Engine type
Max. tilt angles in all directions
Number of cylinders
Engine output
Transmission type
Hydraulic pumps
Caterpillar 3116 DIT

45
6
108 kW / 2 200 rpm
Direct/cogged belt
2 variable, displacement
piston, two gear pumps
Screw compressor type
Enduro 12
Weight (without options)

Width
Height
Total length
13 400 kg
2.45 m
3.6 m / 3.0 m
7.1 m / 11.0 m

RANGER 500
Spec. no: 02250-1
2002-01-02
4/4
Standard components
Selection of options
1. Rock drill
2. Chain feed
3. Rod handler
1.
2.
3.
4.
5.
6.
7.
8.
4. Boom
5. Carrier
6. Powerpack
7. Hydraulic system
8. Control system
9. Operator's cabin
10. Dust collection system
11. Working lights
12. Gauge set
13. Reversing alarm
14. Manuals
HL 510, hydraulic
CF 145H
RH 714 incl. 1 set of
jaws
DB 700, articulated
Track mounted,
turnable
superstructure
Diesel driven,
hydraulic pumps and
on-board compressor
Load sensing and
open center
THC 700
F.O.P.S. and
R.O.P.S.
DC 700 H, hydraulic
7 pcs
For accumulator
pressure checking
Service and spare
parts manuals:
2 x paper copy
2 x CD-ROM
(Toolman)
15. EU-safety devices
The jaws for drill steels

Drill steel
type
Extension
rods
1
2
MF-rod
Extension
rods
MF-rod
Extension
rods
MF-rod
Drill steel
diameter
32 mm
1 1/4"
32 mm
1 1/4"
38 mm
1 1/2"
38 mm
1 1/2"
45 mm
1 3/4"
45 mm
1 3/4"
Recommended
hole diameter
45 - 57 mm
1 3/4" - 2 1/4"
45 - 57 mm
1 3/4" - 2 1/4"
Air conditioning
Rod greasing system
P&Q electric vertical angle indicator ( 6 deg.)
Electric angle indicator TIM 2302 with aiming unit
Measuring system TIM 2303 with aiming unit
Laser based measuring system TIM 2305
Electric filling pump for refuelling
Remote control box; for rear ground support,
driving and oscillation
9. Remote control box + hydraulic winch with cable
tightness automatics (replaces previous option)
10. Hydraulic rear ground support
11. Three-bar grouser plates
12. Guides for grousers
13. Fuel operated heater for cabin, hydr. oil and engine
14. Flushing control automatics
15. Shut down of suction for water holes
16. Sanroc Mini H hydraulic bit grinder
17. Movable drill steel support
18. Primary separator PE 50
19. Horizontal drilling kit
20. Ether starting aid for engine, without ether bottle
21. Radio with CD player
22. Central lubrication system
23. Kit for alternative steels
24. Water injection system with tank
25. Water injection system w/o tank
26. Biogradeable hydraulic oil, Shell naturelle HFE 46
or HFE 68 (synthetic ester)
27. Extra manuals
28. First service kit for Ranger 500
29. Special tools for HL 510, field kit ID 880 817 19
30. Special tools for HL 510, complete ID 152 257 68
64 - 70 mm
2 1/2" - 2 3/4"
64 - 70 mm
2 1/2" - 2 3/4"
76 - 89 mm
3" - 3 1/2"
76 - 89 mm
3" - 3 1/2"
Note
-
not with 10' MF-rods
if several jaws selected please specify jaws

assembled


Ranger 500 1 PDF

Uploaded by

Copyright:

Available Formats

Ranger 500 1 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ranger 500 1 PDF

Uploaded by

Copyright:

Available Formats

RANGER 500

PowerTrak Ranger 500 has an ergonomic cabin to

Horizontal drilling, sideways

SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND

Hydraulic rock drill

Chain feed and rod handler

Air flushing capacity

Load sensing system

Pilot operated, hydraulic

Dust collection system

Caterpillar 3116 DIT

Screw compressor type

Weight (without options)

SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND

15. EU-safety devices

The jaws for drill steels

not with 10' MF-rods

if several jaws selected please specify jaws

SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND

You might also like