WindSim - Getting Started

Getting Started
WindSim 7
WindSim AS
Fjordgaten 15
N-3125 Tnsberg
Norway
+47 33 38 18 00
www.windsim.com
2014 WindSim AS
WindSim | Getting Started

8th Edition | January 2015
WindSim 7
Dr. Catherine Meissner
2015 WindSim AS | DUPLICATION PROHIBITED WITHOUT PRIOR PERMISSION
CONTENTS
Contents
ABOUT WINDSIM ...................................................................................................... 1
MICROSITING ....................................................................................................................... 1
MODULAR APPROACH.......................................................................................................... 1
WINDSIM MODULES ............................................................................................................. 2
ABOUT THE TECHNOLOGY .................................................................................................... 2
WINDSIM EV VERSUS THE WINDSIM COMMERCIAL VERSION .................................................. 4
INSTALLATION ..................................................................................................................... 4
EXPLANATION OF CONTROLS & NOMENCLATURE ............................................ 5

TITLE BAR ........................................................................................................................... 5
MENU BAR .......................................................................................................................... 5
File .................................................................................................................................. 6
Layouts ........................................................................................................................... 7
Modules .......................................................................................................................... 7
3D Visualization .............................................................................................................. 7
Tools ............................................................................................................................... 8
Help ................................................................................................................................ 9
MODULE SELECTOR............................................................................................................. 9
INFORMATION PAGES ..........................................................................................................11
Description Pages ..........................................................................................................11
Report Pages .................................................................................................................11
Start ...............................................................................................................................12
MODULE - PROGRESS .........................................................................................................12
PROPERTIES.......................................................................................................................12
PROCESSING OUTPUT .........................................................................................................13
TUTORIAL PROJECT: HUNDHAMMERFJELLET ................................................. 14

TERRAIN ............................................................................................................................15
WIND FIELDS ......................................................................................................................23
OBJECTS ...........................................................................................................................27
NOISE CALCULATIONS ........................................................................................................34
RESULTS ............................................................................................................................36
WIND RESOURCES ..............................................................................................................40
Wake Modeling ..............................................................................................................41
ENERGY .............................................................................................................................42
CONTENTS
A GRID SENSITIVITY STUDY ................................................................................. 44

CONFIGURE PARTICLE TRACES IN GLVIEW PRO ............................................. 48
GENERATION OF THE WIND VISUALIZATION FILE ...................................................................48
SETTING THE ATTRIBUTES...................................................................................................49
CREATING THE PARTICLE TRACES .......................................................................................51
ANIMATING THE TRACES .....................................................................................................53
TEXTURES ..........................................................................................................................54
SAVE AND SHARE ...............................................................................................................55
CONFIGURE ISOSURFACES IN GLVIEW PRO ..................................................... 56

GENERATION OF THE WIND VISUALIZATION FILE ...................................................................56
OPEN 3D VISUALIZATION FILE .............................................................................................56
SETTING THE ATTRIBUTES...................................................................................................57
CREATING THE ISOSURFACES ..............................................................................................58
TEXTURES - SAVE AND SHARE ............................................................................................59
ADD-ON MODULE: TERRAIN EDITOR .................................................................. 61

NEW PROJECT....................................................................................................................61
GEOREFERENCING ..............................................................................................................62
DRAW ROUGHNESS .............................................................................................................65
EXPORT .............................................................................................................................67
UNDO/REDO .......................................................................................................................67
CHANGE MAP IMAGE ...........................................................................................................67
ADD-ON MODULE: REMOTE SENSING CORRECTION TOOL ............................ 68
About WindSim
Micrositing
WindSim is a modern Wind Farm Design Tool (WFDT). WindSim is used to optimize the wind
farm energy production while at the same time keeping the turbine loads within acceptable
limits. This is achieved by calculating numerical wind fields over a digitalized terrain. In the
wind energy sector this is called micrositing.
By coupling the numerically calculated wind speeds and wind directions against available sitespecific climate conditions the optimal position for each turbine can be found. Climate
conditions are most frequently given by on-site measurements, but could alternatively be
derived from meteorological models. WindSim can interface with both of these types of
datasets.
The loads on a wind turbine are influenced by wind field characteristics such as; wind shear,
inflow angle, and turbulence. Since the wind field modeling is 3D all of these characteristics
are calculated and checked to be within acceptable limits for a given turbine type.
The optimization of the energy production and the minimization of the loads could be conflicting
processes. The location yielding maximum energy production for a wind turbine could also
yield too high loads, and often a compromise must be found: a location with the highest
possible energy production still with acceptable loads. Micrositing is an iterative process where
various turbine locations and types have to be inspected.
Modular Approach
WindSim uses a modular approach with six modules to complete the steps within micrositing.
Figure 1 - WindSim is a modular based Wind Farm Design Tool (WFDT)
2015 WindSim | DUPLICATION OF THIS DOCUMENT IS PROHIBITED WITHOUT PRIOR PERMISSION
About WindSim
A full micrositing will require execution of all six modules. The modules must be executed in
the right order as there are dependencies between the modules. However, depending on the
purpose of the project, it is not always necessary to run all the modules.
WindSim Modules
Terrain
Establish the numerical model based on height and roughness data
Wind Fields
Calculation of the numerical wind fields.
Objects
Place and process wind turbines and climatology data.
Results
Analyze the numerical wind fields.
Wind Resources
Couple the numerical wind fields with climatology data by statistical means to provide
the wind resource map.
Energy
Couple the numerical wind fields with climatology data by statistical means to provide
the Annual Energy Production (AEP); including wake losses. Determine the wind
characteristics used for turbine loading.
In addition to the modules there are stand-alone Tools for data preparation and data postprocessing. In particular, Tools are used for the import and preparation of terrain and
climatology data. WindSim 6 also works with Add-on Modules including the Remote Sensing
Correction Tool (RSCT) and Park Optimizer.
About the Technology

Computational Fluid Dynamics (CFD) is used to perform the wind field simulations in WindSim.
CFD is a numerical method for solving the fundamental equations of fluid flow. CFD has
become a very useful method within many industries. Accurate flow simulations are required
within the automotive industry, oil and gas, and of course within the aerospace industry. In
these industries CFD has become the standard method for flow calculations.
The fundamental behavior of fluid flow is described by the Navier-Stokes equations. The
Navier-Stokes equations are non-linear partial differential equations known to be unstable and
difficult to solve. Therefore simplified methods, where the troublesome non-linear terms have
been linearized have become popular within the wind energy sector. However, the severe
penalty is the reduced accuracy in the results.
3
The differences between the traditional so called
linear method and the CFD method could be
illustrated by looking at speed-up over a ridge. The
speed-up increases with increasing inclination angles
until the flow separates, as seen in the upper part of
Figure 2.
This behavior is captured by a CFD method. Even for

smaller inclination angles, when the flow does not
separate there is a significant difference in predicted
speed-up between the linear and the CFD methods.
For an inclination angle above 20 degrees (Case C)
2.2
the flow separates. The recirculation acts as an
extension of the terrain, the ridge becomes more like
1.8
a plateau and the speed-up is reduced.
1.6
B
A
CFD model
1.4
The Navier-Stokes equation is time averaged

introducing terms for the speed fluctuations. A
Linear model
1.2
0
10
20
30
40
turbulence model is required to close the equation

set of the so-called Reynolds Averaged NavierStokes equation (RANS). The RANS equations are
discretized in a computational domain, and
Figure 2 - Upstream speed-up, (Speed hill

top/speed inlet). Average inclination angle
(degrees) A) 5.7 B) 11.3 C) 21.8 - Linear
model (light grey) CFD model (dark grey).
integrated with a finite-volume procedure.
There are various solvers and solver strategies

implemented in the software. Turbulence is taken
into account using various types of two equation
models like the k- model.
We invite you to learn more about the Bolund Experiment. The Bolund experiment is a field
campaign that provides datasets for validating numerical models of flow in complex terrain and
was the basis for a unique blind comparison of flow models. The CFD methodsincluding
WindSimshowed the lowest errors among the various methods used. Find out more about
the Bolund Experiment at windsim.com.
About WindSim
WindSim EV versus the WindSim Commercial Version

WindSim EV contains all the features of the commercial version but is intended for evaluation
use. The only restriction of WindSim EV is the maximum number of cells used to discretize the
computational domain. The total numbers of cells are 5000, and there are 10 layers of cells
vertically. The limit on the number of cells; as will be shown in the following paragraphs, have
two effects:
It smoothes the features of the given height and roughness data
It introduces significant discretization errors
The results obtained with WindSim EV are therefore not intended for commercial work.
However, the user will be able to explore all the components of the software with this tutorial,
and also appreciate the power of the commercial version.
Installation
Download WindSim EV from windsim.com/ev and run the installation file. You may have
already obtained the installation on a CD or on a USB key in a training session.
WindSim 5 requires the Microsoft .NET Framework 4. Please install it before you begin your
WindSim installation if it is not already installed on your computer.
Get the Microsoft .NET Framework 4 here.
WindSim is by default installed on C:\Program Files\WindSim, while the project folder where
WindSim projects are stored is located in the My Documents\WindSim Projects folder. You
may change these default settings during the installation. After installation while running the
program projects could be saved at arbitrary locations.
Once WindSim is installed it can be run from the shortcut added on the desktop or from the list
of programs in the Start Menu of Windows.
5
1.
Explanation of Controls & Nomenclature

The program consists of the following components:
Title bar
Menu bar
Module selector
Information pages
o
Description
Report
Task list
Properties
Property information
Processing output
Title Bar
The title bar consists of the following items:
The WindSim logo
Name of the program: WindSim
Name of the current project
Name of the current layout
Figure 3 - Title bar.
Menu Bar
The menu bar consists of the following items:
File
Layouts
Modules
3D Visualization
Tools
Help
Figure 4 - Menu bar.
File
Under the File drop-down menu, you will find all the controls needed for File management:
New
o
Project
Create a new project
Project copy
Create a new copy of the current project
Layout copy
Create a new copy of the layout(1) for the

current project
Open
o
Project
Open a project
Layout
Open a layout(1) belonging to the current

project
Recent Projects
Remove
List of the recently used projects
Project
Remove the current project
Layout
Remove the current layout belonging to

the current project
Print
Print the currently displayed page
Print Preview
Preview the currently displayed page

before printing
Save
Save the current project
Revert to saved
Reset the properties to the state before

last module execution
Properties
Open a window with summarized main

information on the current project
(1)
Exit
Exit WindSim
Layout: when a project has more than one layout, the Terrain and Wind Fields will remain the same. Layout copy enables you
to test different wind farm configurations using the same Terrain and Wind Fields data.
7
1.
Layouts
Under the Layouts drop-down menu, the following commands are available:
Create copy
create a new layout as a copy of the

current one
List of loaded layouts
Terrain texture file

o
Open
tick off the layout you want to activate
Load a .bmp or .rgb texture to paste over

the terrain
List of loaded textures
tick off the texture you want to activate
Modules
Under the Modules drop-down menu, the user can choose which module to run. The
functionality of each module is described in more depth later in this document. The present
drop-down menu is equivalent to the Module Selector:
Terrain
Wind Fields
Objects
Results
Wind Resources
Energy
3D Visualization
In this module the user can select several 3D Visualization items:
Generate 3D wind visualization file (*.vtf)
Generate a wind visualization file
Open 3D wind visualization file (*.vtf)
Open an existing wind visualization file
Download 3D samples
Download .vtf files from the WindSim

website.
Download sky textures
Download sky background examples

from the WindSim website.
The .vtf files can be opened with GLview PRO the application for post-processing provided
with the full installation of WindSim or with GLview Express. GLview Express is a freely
available viewer of .vtf files that can be downloaded from the WindSim website. GLview
Express contains a subset of the features of GLview Pro. It would be a tool for non-WindSim
users to explore the 3D wind visualization results.
Tools
View terrain model (*.gws)
View the terrain model in a text editor
Import terrain model (*.gws)
Import a terrain model to WindSim
Convert terrain model
Convert terrain data from .map format to

the WindSim format .gws
Terrain Editor
Launch the Terrain Editor application
Park Optimizer
Launch the Add-on Module WS Park

Optimizer
Import mesoscale driving data (*.dws)
Import results from a meteorological

model
Remote Sensing Correction Tool...
Launch the Add-on Module WS Remote

Sensing Correction Tool, used to correct
LIDAR data based on WindSim results
View climatology data (*.wws)
View the climatology file in a text editor
Convert climatology data
Convert climatology data from the .tab

format to the WindSim format .wws
Export climatology file (*.tab)
Export a climatology file to the .tab

format
Create power curve (*.pws)
Create the power curve file of the

considered wind turbines if they are not
present in the WindSim database
Import objects (*.ows)
Import objects into WindSim from an

*.ows file
Export object (*.ows)
Export objects in the current layout to

an .ows file
Create Word report...
Generate a report of your project in .doc

format
Export HTML report...
Generate a report of your project in

HTML format
Export Vertical Profiles
Extract vertical profiles of chosen scalar

at turbine and/or climatology positions
Change language
Advanced conversion :
o
Convert terrain model (CMD)
Change the current language
Convert terrain data from other formats

to the WindSim terrain format, *.gws
Convert climatology data (CMD) Convert climatology data from other

formats to the WindSim format .wws
9
1.
9
Limits
Click to see the computational limits of

WindSim models
Losses and Uncertainties...
Calculation of losses and uncertainties
Forecasting...
Launches the Add-on Module WS Power

Forecasting
Power Line
Launches the plug-in to calculate

transmission line capacity
MCP
Launches the plug-in to do MCP
Reanalysis Data Downloader
Launches the plug-in to download

MERRA mesoscale date
Queue
Launches the plug-in to run several

projects automatically
Help
In the Help section you will find:
About WindSim
Version and License information.
Renew Key
License details and how to obtain and update your license code*.
Release Notes
Links to web-based version of the Release Notes. RSS-enabled.
Getting Started
Opens Getting Started (a PDF of this document).

* License codes are not required for WindSim EV, our evaluation version.
Module Selector
The Module Selector, shown in
Figure 5, consists of the following headings:
Terrain
Wind Fields
Objects
Results
Wind Resources
Energy
Figure 5 - Module selector with the Terrain module activated.
Click on a module button to activate it.
10

Your progress with WindSims modular approach is always visible. Once selected, a Module
button can have one of three states:
Modules with a green check have been run successfully.
Modules highlighted with animated circular arrows are running.
Modules with a grey cross have not been run.
NOTE: There are important dependencies among the modules.
You must first run the Terrain module in order to establish the computational model to
successively generate the wind database. When the Terrain module has a green check, you
can run the next module, the Wind Fields module.
In the Wind Fields module the wind database is generated. This database contains detailed
information about the wind field in the computational model established in the Terrain module.
If the user now go back to the Terrain module and change any of the parameters, the Terrain
module will become red. It needs to be re-run to be updated, and the same procedure must be
done with the Wind Fields module. It does no longer contain a wind database that is compatible
with the terrain model the user re-defined in the Terrain module. Once the user has calculated
the terrain model and the wind database the Terrain and Wind Fields modules will have green
checks, then you may start working with the other modules.
The Objects module will place and process climatology data and place wind turbines. They are
commonly called objects. Both climatology and wind turbine objects must be specified in the
Objects module In order to process all the remaining modules.
The wind data are visualized in the Results module. Both the Terrain and Wind Field modules
must be correctly run before you can run Results.
The wind measurements contained in the climatology files are then used to weight the wind
database. This is done in order to get realistic data about how the wind is influenced by the
terrain in the Wind Resources module.
The wind turbines locations and power curves loaded in the Objects module are combined
with wind measurements in the Energy module, to compute a complete estimation of the
energy production.
The best way to get a good feel for these dependencies is to start working with WindSim.
11
1.
11
Please refer to the example project described later in this document for further guidance.
Information Pages
There are Description and Report pages in all WindSim modules. By clicking on either of the
links you are able to toggle between the corresponding pages. The active link is colored blue.
In the Objects module there is one additional link to activate the Park layout. Whenever the
information pages contain sub-pages the toggles Back and Forward are used for browsing.
Figure 6 - Information pages.
Description Pages
The description pages describe the purpose of a module. It explains which consideration you
need to make in order to successfully run the module. The Description pages also give a
detailed explanation of the Properties, which is the module input. The Description page header
displays the module name, the WindSim version number, and the date when the pages were
last updated.
Figure 7 - Description page header.
Report Pages
The report pages contain the results from the corresponding module. The Report page header
contains information about the project. There is information about the License, Customer,
Project, Layout, WindSim version number, and a timestamp when the report was generated.
Figure 8 - Report page header.
12
Start
Each module is run by clicking on the Start button. The
Task List appears above it showing if the module is
ready to be started or if a previous dependent module
has to be started first.
Figure 9 - Start button
with the Task List informing
Module - Progress
about
module dependencies.
Figure 10 The WindSim Module Selector displays your progress through the modules.
Your progress with WindSims modular approach is always visible. Once selected, a Module
button can have one of three states:
Modules with a green check have been run successfully.
Modules highlighted with animated circular arrows are running.
Modules with a grey cross have not been run.
Properties
In the Properties panel located on the right hand side of the screen, all the settings for a given
project are specified. Each module has its own set of properties. Explanations of the properties
are found on the Description pages. You can click on the property to insert and type the desired
values. You can also use the arrow keys to move up and down through a list of options provided
to make a selection. Whenever you need to specify more than one value for a property, the
semicolons syntax is used to separate the values. Press the Enter key when ready to enter a
new value or click somewhere outside the current input field in order to set a new value.
The frame below the Properties panel shortcut information about the selected property is given.
NOTE: More detailed information about each property is found in the Description page of the
current module.
13
1.
13
Figure 11 - Properties for the Terrain module including property information of the selected
property (roughness height) in the lower frame
Processing Output
In this frame you will see the output result concerning the module which is currently running or
just finished. This result may contain information describing if the module has been run
correctly. Otherwise it will display errors, warnings, or additional information.
Figure 12 - Processing output frame.
14
Tutorial Project: Hundhammerfjellet

In this tutorial project we look at the site of Hundhammerfjellet, located on the coast of Norway.
The tutorial will guide you through all six modules of WindSim.
Open WindSim and start a new project by choosing:

File > New > Project...
The New Project window is opened;
Figure 13 - New Project window.
Set your project location, which is the folder where your project will be stored, by browsing
your hard drive, push the button
or use the default path, (C:\Documents and
Settings\User_name\My Documents\WindSim Projects), give a project name, leave the Layout

name as Layout 1, and finally enter the name of your customer. If no GWS file is specified,
then the grid.gws with the terrain from Hundhammerfjellet will be automatically copied from the
WindSim installation area. In this tutorial, this field is kept empty to load to default terrain data.
Elevation and Roughness data are read from the .gws file, and imported in the new WindSim
project. Click OK in order to create the project.
15
1.
15
Terrain
The first step within micrositing is the generation of a 3D model in the Terrain module. This
involves choosing the horizontal and vertical extension of the volume to simulate. This volume,
which we will call the computational domain, is then discretized into a system of hexahedral
cells called a grid or mesh. The computational domain is built based on the digital terrain in
*.gws format containing information about elevation and roughness.
WindSim can be run either by using the default settings in Properties or by specifying their own
settings.
NOTE: If you specify a non-default property value, then it is shown in bold type.
In WindSim EV, the maximum number of cells in the vertical direction has been set to 10, while
the total number of cells in all three directions has been limited to maximum 5000. In the
commercial version of WindSim, the maximum number of cells would typically be limited by
the available computer resources. Models with millions of cells can be simulated on PCs with
a 64-bit operating system. The restrictive limitation in WindSim EV on the number of cells used
for the computational model means that the results will not have the accuracy required for a
proper micrositing thus WindSim EV it is not intended for commercial work.
Run the Terrain module by clicking on the Start button with the below settings;
Figure 14 - Property settings for the Terrain module.
16

Upon successful completion, the Module Selector of the Terrain module will have a green
check and the Description pages will automatically be switched to the Report pages. Some of
the content in the report are presented below.
Figure 15 - Plot from Terrain module report; 2D Field: Elevation.
Click on the black arrows above the plots in the Report pages to visualize various 2D field data:
Elevation
Roughness height (z0) with both linear and logarithmic scale
Inclination angle (deg)
Second order derivative of the elevation
Delta elevation.
The delta elevation variable gets a non-zero value only when the smoothing option is applied to the model.
Click on 3D Model and the black arrows to visualize;
Grid (xy)
17
1.
17
Grid (z)
Open area
Grid (xy) and Grid (z) contain information about the grid spacing and number of cells used for
the discretization in horizontal and vertical directions.
The Open area data is a useful tool to understand if too much blockage has been introduced
in the generation of the 3D model. A Wind Field simulation can be viewed as a numerical wind
tunnel test; too much blockage would produce unphysical and therefore unacceptable speedups. The ratio between minimum and maximum open area is used in the automatic generation
of the proper height of the 3D model, see the Description pages for details.
When you click on 3D at the upper right of each plot; a 3D model in the visualization tool GLview
is opened. The 3D visualization option is available for all the sections 2D Fields, 3D Model,
and Extension. The 3D visualization option is also available in the other modules of WindSim.
There is a separate section in this document that further explores GLview. For now, we only
explain the basic operations of movement:
Translation with left mouse button
Rotation with right mouse button
Zoom with mouse wheel or both mouse buttons simultaneously
Click on Extension to visualize the horizontal extension of the generated 3D model which is
marked with a grey frame over an elevation contours map;
18
Figure 16 - Plot from Terrain module report; Extension
The contour map for the Extension is based on the original resolution of the .gws file, thus on
the maximum possible resolution and not on the 3D model which is coarser than the original
digital terrain data. The difference in resolution is particularly clear when comparing the two
plots under 2D Field: Elevation and Extension.
If you want to reduce the extension of the model, it is possible to explore the terrain extension
in the 3D model, where the needed coordinates are found. In order to produce a finer mesh,
which means smaller discretization errors in the area of interest where the wind park has to be
constructed, a new terrain model is therefore desired with user specified properties.
Assign a new extension to the terrain model in the Properties panel by new X-range and Yrange. Define a refinement area to design an even denser grid in the area of interest, where
the wind park has to be located;
19
1.
19
Figure 17 - Property settings for the Terrain module, reduced area with refinement.
In this way you have cropped from the original .gws file an area only covering the ridge of
Hundhammerfjellet, where the wind park will be located. The borders of the computational
domain are still quite far from the area of interest in order to avoid too heavy boundary effects.
Click Start on the right hand side of your screen to run the Terrain module again.
Click on Terrain > Report > Extension to get the Figure 18 and Figure 19 in the Report frame,
which shows the extension of the new 3D model compared to the original gws terrain data.
NOTE: When refinement is applied, the horizontal resolution varies. Its minimum and
maximum values are available in the Report > 3D Model and Grid (xy).
Click on Terrain > Report > 3D Model, and then select Grid (xy) using the black arrows to obtain
the report on the horizontal discretization of the generated 3D Model shown in Figure 20.
Click on Terrain > Report > 3D Model and then select Grid (z) using the black arrows to obtain
the report on the vertical discretization of the generated 3D Model, shown in Figure 21.
Click on Terrain > Report > 3D Model. Then select Open area by using the black arrows to obtain
what is shown in Figure 22. The criteria named Open area account for the ratio of minimum
20

and maximum area of the intersections of the computational domain with vertical planes southnorth and west-east directed. The wind field simulations can be seen as numerical wind tunnel
runs. So, it is important to reduce the blockage effect which produces unphysical speed-up.
NOTE: The ideal height of the 3D model is computed automatically in order to keep this ratio
above an acceptable value, see Description for details.
Figure 18 - The digital terrain model, marked as a box, is extracted from grid.gws.
Figure 19 - Terrain > Report > Extension.
21
1.
21
Figure 20 - Terrain > Report > 3D Model: Grid (xy).
22
Figure 21 - Terrain > Report > 3D Model: Grid (z).
23
1.
23
Figure 22 - Terrain > Report > 3D Model: Open area.
Wind Fields
Once the generation of the 3D model has been completed in the Terrain module, the CFD
simulations of the wind fields can start. The wind fields are determined by solving the Reynolds
Averaged Navier-Stokes equations (RANS). The standard k- model is one option for
turbulence closure. The RANS equations are discretized and integrated with a finite-volume
method. Starting with the initial conditions, which are guessed estimates, the solution is
progressively resolved by iteration until a converged solution is achieved.
There are four possible ways to solve the RANS equations in WindSim:
Segregated, a segregated solver (SIMPLEST)

Robust but slow. Best for smaller projects 2-3 million cells
Parallel segregated solver

Similar to the segregated solver but single sectors can be split
GCV; a General Collocated Velocity method. Very robust. Always delivers a converged
solution
Parallel GCV, a parallel solver of GCV to split single sectors.
24

For more information concerning the solver you can look at the Description in Wind Fields
module.
Select the Wind Fields module, and run the module with default settings. A window will pop
up to let you follow the development of the flow field during the iterative computation. If several
sectors are solved simultaneously on different processors then one GLview window will open
for each sector being solved:
Figure 23 - One GLview window will pop up for each simultaneous sector being run.
By default, the software monitors the magnitude of the velocity vector at the ground level (at
the centre of the ground adjacent cells). If the simulations have reached a converged solution,
you should not be able to see any further change in this plot.
In the Report pages you can check whether the modeling has been carried out correctly, by
inspecting the graphs of the Spot and Residual values for all the solved variables. This is
shown in Figure 24 and Figure 25.
25
1.
25
Figure 24 - Wind Fields > Report > Spot Values.
Figure 25 - Wind Fields > Report > Residual Values.
The report pages for the Spot and Residual values are completed with three tables regarding
setting and status of the performed calculations.
In the Table 1 on the following page there is a summary of Boundary and Initial Conditions
adopted for the simulations; Table 2 reports the Calculation parameters and the current status
of the simulations while the Table 3 provides further information about Physical models and
output for the wind field simulations. The parameters summarized in these tables are all
explained in the description pages of the Wind Field module.
26
Figure 26 - Wind Fields report
In the Wind Fields > Report > Field Value menu, it is also possible to see an animation of
the development of the chosen variable during the iterative process. In well converged
simulations, the calculated variables should not change any further with iterations. A
screenshot of the monitored variable is shown in Figure 27.
27
1.
27
Figure 27 - Wind Fields > Report > Field Value.
Objects
The Objects module is used to;
Place turbines in the park area
Process climatologies
Place transferred climatologies
Geometrical objects can also be placed within the 3D terrain model for visualization purposes.
At the actual Hundhammerfjellet site there are 17 turbines and 2 climatologies. This layout is
already established. It can be read by using the command:
Tools > Import objects (.ows)...
Load the file:
C:\Program Files (x86)\WindSim\WindSim 7.0.0\Data\Objects\Hundhammer.ows
28

Note that the name "Program Files" might vary according to which operating system you run
on your computer
17 wind turbines will be added to the park layout. The following window message will pop-up
if the import is successful:
Figure 28 - Successful import of objects from an .ows file.
An alternative to the procedure described is to introduce new objects interactively in the Park
Layout using the Toolbox:
Figure 29 - Toolbox for interactive manipulation of objects.
with the following tools:

Select mode
Add turbine mode
Add climatology from file
Add transferred climatology mode
Remove selected object
Remove all
With the Park Layout it is possible to add, drag and drop wind turbines in a graphical window.
This helps the user to design the park layout and make modifications to it. After adding a
turbine it could be moved interactively. Change the position of an object by first activating the
"Select mode" in the Toolbox. Next, select an object by the clicking the left mouse button, the
objects is moved with the mouse while pressing the Shift button.
29
1.
29
The user still needs to load the climatology files (.wws or .tws), before running the module.
Load a climatology using the "Add climatology from file" from the Toolbox. Two climatologies
have been prepared for the site at Hundhammerfjellet namely: 0150-Tommerhol30m_1year.wws and 0801-Hundhammer-30m_1year.wws located under the folder:
C:\Program Files (x86)\WindSim\WindSim 7.0.0\Data\Objects\Climatology. Both sets of
data are for anemometers at 30 meters height, and referred to the same measuring period of
1 year. By using the "Add climatology from file" these climatologies are copied into the project
folder structure.
Remark that climatology objects cant be moved, their position is given in the .wws or .tws files.
The only way to change the location for a climatology object is to change the coordinates in
the files.
The Objects module is now ready to run, click on the Start button. The layout of the wind farm
can be visualized by selecting the Report > Object representation menu. The report for the
Objects module will appear as in Figure 30 and Figure 31. The main features of the
climatologies and turbines within the wind farm are listed in the tables 1 and 2 of the report.
Further information on climatologies and turbines are given if the user clicks on the links (blue
bold type) in the tables. An animation is available which is activated by Report > Animation and
3D to open GLview Pro. An animation is also available directly in the Park layout.
30
Figure 30 - Objects > Report > Object representation.
Figure 31 - Objects > Report > Object representation continued
31
1.
31
A photo or texture can be pasted on the terrain to provide a more realistic view of the wind
farm area. Load the file hundhammerfjellet.bmp by opening Layouts > Terrain texture file
> Open . The file is located under the folder: C:\Program Files (x86)\WindSim\WindSim
7.0.0\Data\Texture. Run the object module again in order to apply the texture. Activation of
Texture in the Objects module report gives a plot with the photo draped over the terrain as
seen in figure 32.
Figure 32 - Objects > Report > Object representation with Texture.
Click on 3D objects and open this graphic in GLview by clicking the 3D button. This
allows various perspective views of the wind farm. At this stage fly-troughs could be
generated, check out the 3D Samples at the WindSim web site.
32
Figure 33 - Perspective view of the Hundhammerfjellet wind farm
It is also possible to set up and display various cutting planes and iso surfaces. This is
done by first clicking on the Park layout frame and then selecting the Surfaces tab.
Finally, choose the sector from which to plot data, from the Select sector drop-down
menu. The following tools will be lightened:
Select mode
Add terrain cut plane
Add cutting plane
Add iso surface
Add swept area
Remove selected object
Remove all
Add terrain cut plane

With the Add terrain cut plane icon you can add a terrain parallel to the original. After
you adjust the height of the plane you can choose the variable of interest from the scalar
drop-down menu.
33
1.
33
Add cutting plane

With the Add cutting plane icon you can add a plane to the original terrain. You can
adjust both the position and the angle of the plane with the Position and Normal
options.
Add iso surface
The Add iso surface icon displays an iso surface of a variable which you can select from
the Scalar drop-down menu. The scale value of that variable will automatically appear
on the left of the screen, but you can also choose display myltiple scales from the Map
Value drop-down menu. Furthermore, you can either choose the value of the variable by
adjusting the value bar, or by selecting a specific one.
Add swept area
You can display the value of a variable on a wind turbines swept area by selecting a wind
turbine with the Select mode and then clicking on the Add swept area icon.
Remove selected object & Remove all
You can always delete an object by choosing it and then clicking on the Remove selected
plane icon. If you want all the objects deleted, then you can just click on the Remove all
icon.
NOTE: This actions do not require confirmation, so be careful when you are about to use them.
34
Figure 34 - An example of a cutting plane of wind speed displayed in Park Layout
The wind profile can easily be illustrated over the swept areas of the turbines as explained at
the Add swept area node.
Figure 35 - A swept area plot of turbulent kinetic energy for all turbines.
Noise Calculations
Noise calculations are performed in the Objects module. First, select a wind turbine or a
climatology and then select Noise calculation>Based on broadband at the Objects frame,
as shown in Figure 36, in order to carry out a noise analysis, which can be output at any height,
for any wind direction and for any wind speed. The default settings produces a noise map in 2
35
1.
35
meters' height, for a northern wind of 5 m/s. The wind direction and wind speed is by default
defined to be the conditions at the Hundhammer climatology.
Figure 36 - Example Properties for the CFD noise calculations in the Objects Module
Background noise level is set to 0 db so that only the noise contribution from the wind turbines
is estimated. Local standards or project requirements may require the background noise to be
included. The attenuation coefficient represents the industry standard for broadband noise.
More experienced users might wish to adjust this constant to account for site specific
atmospheric conditions and/or to account for an octave band analysis.
Run the Object module again by clicking the Start button.
A new set of reports is generated with a separate noise map found under Report > Object
representation > Noise. The map represents the noise pressure level in dB for all locations
in the project.
36
Figure 37 - Noise Calculation report
Results
In the Results module the user can extract 2D planes with variables stored in the wind
database. The vertical extension covered is from the ground and up to the "Height of reduced
wind database" as specified in the Wind Fields module. The 2D plane is given at a specified
height above the terrain. The following variables and derived variables from the wind database
are available:
Speed scalar X
Wind speed scalar in the East-West direction, UCRT
Speed scalar Y
Wind speed scalar in the North-South direction, VCRT
Speed scalar Z
Wind speed scalar in the vertical direction, WCRT
Speed scalar XY
Wind speed scalar in 2D = ( 2 + 2 )
Speed scalar XYZ
Wind speed scalar in 3D = ( 2 + 2 + 2 )
Velocity vector XY
Wind speed vector in the horizontal plane, (UCRT,VCRT,0)
Velocity vector XYZ
Wind speed vector in 3D space, (UCRT,VCRT,WCRT)
Direction scalar
Wind direction in the horizontal plane in degrees
37
1.
37
Direction scalar relative
Wind direction in the horizontal plane relative to the incoming

wind direction (degrees)
2
2
Turbulent kinetic energy
The turbulent kinetic energy =
Turbulent intensity
The turbulent intensity assuming isotropic turbulence

4
3
( 2 + 2 )
100
(%)
2
3
Turbulent dissipation rate
The turbulent dissipation rate =
Pressure
The relative pressure minus hydrostatic term (Pa), the relative

pressure has a value equals to zero at the outlet of the domain
Inflow angle
Angle between the wind vector and the horizontal plane
Wind shear exponent
The exponent of the power law
As an example the Wind velocity 3D (u,v,w), at 50 m height, and the Turbulent Kinetic energy
at 50 m height is extracted. Remember to press New every time a new set should be activated.
There is a limit of 200 plots that could be generated during one run. In the below case 2
variables x 12 sectors x 1 height will give 24 plots. Re-run the module if the 200 plot limit
impose a restriction on your exploration of the various datasets.
1. Click New at the Properties window.
2. Choose Velocity vector XYZ at the Normalisation variable menu.
3. Click Start.
4. Figure 40 should appear.
Repeat the same steps, but this time choose Turbulent kinetic energy at step 2, to obtain
Figure 41.
Figure 38 - Properties panel, Results module, extraction of Velocity vectors
38

NOTE: The Results, Wind Resources and Energy modules are totally separated and
independent from each other, therefore it is not necessary to run them sequentially. If, for
example, you need to obtain the AEP from the Energy module, you just can only run the
Energy module and it is not needed to run Results and Wind Resources first.
Figure 39 - Properties panel, Results module, extraction of Turbulent kinetic energy
Run the module. Inspect the report, the velocity vector, and the turbulent kinetic energy for all
12 sectors are available as shown in Figure 38 and Figure 39.
NOTE: The height for the extracted results has been set to the default value of 50 m above
ground level. Typical heights of interest are the turbine hub height and the height of the wind
measurements.
NOTE: That the default legend setting of 0;0 sets the minimum and maximum values found in
each extracted dataset as legend limits. This limit has been reset for the turbulent kinetic
energy in Figure 39. This is done to better explore details in the results as seen in Figure 41.
It is important to note that the Results module is a tool for visualization of the wind field
simulations. This is to observe how the flow fields are affected by the terrain. The wind speeds
are not by default calibrated with the wind measurements. Non-dimensional, normalized plots
are also available. Then you need to choose the desired normalization type in the property
grid. The Wind Resources and Energy modules are used to weight the wind database against
the climatology data.
39
1.
39
Figure 40 - Results > Report. Wind velocity 3D (m/s) for sector 330 at 50 m a.g.l.
40
Figure 41 - Results > Report. Turbulent Kinetic energy (m2/s2) for sector 330 at 50 m a.g.l.
Wind Resources
The Wind Resources module is used to create wind resource maps at chosen heights.
At least one visible climatology must exist in the current layout before running the Wind
Resource module. All sectors defined in a given climatology must exist in the wind database.
The wind resource map is established by weighting the wind database against the climatology.
If several climatology objects are available, the wind resource map will be weighted against all
of them. This is done by an inverse distance interpolation of the climatology objects.
Run the module to create a wind resource map for the Hundhammerfjellet project at 50 and 80
meters height with the properties given in Figure 42.
41
1.
41
Figure 42 - Properties panel of the Wind Resources module.
NOTE: Results are not very accurate because of the limited size of the computational model
WindSim EV which is currently running.
Figure 43 - The wind resource map which is the 2D mean wind speed at 50 m a.g.l. weighted
against all climatologies.
Wake Modeling
If the user is concerned about wake losses in the wind farm (also known as wind park effect),
one of the 3 wake models can be activated. These wake models can be used both in the
42

module Wind Resources, and Energy. A complete description of the models is provided in the
description page of the Wind Resources module.
1.In the Properties frame, select Wake Model 1 at the Wake model drop-down
menu.
2. Re-run the simulation by clicking the Start button. The wake deficits obtained with
wake model 1 at hub height are plotted in Figure 44.
.
Figure 44 - Wake deficit at hub height, wake model 1.
Energy
The annual energy production, AEP, is the most important parameter to be estimated in most
wind farm micrositing projects. For a given wind condition, the available power is proportional
to the third cube of the wind speed. This means that an uncertainty in wind prediction is largely
increased when computing the available power; so high quality wind modeling is particularly
appreciated within micrositing.
43
1.
43
Run the module with the default settings and get the annual energy production for each turbine
and for the whole wind farm.
Figure 45 - Properties panel for the Energy module, default settings.
For each climatology object, two AEPs are given in the Energy report.
The first one is obtained from the frequency table of the climatology files
The second is obtained by Weibull fitting the histogram of frequencies.
An estimate of the energy production is also given by interpolating all visible climatologies. If
the Energy module with an enabled wake model is re-run, the user can estimate the AEP
corrected with wake losses as seen in Figure 46.
In order to estimate the corrected AEP you have to switch the Wake model option from
Disregard wake to Wake Model 1 and re-run the simulation. The introduction of Sub-sectors
and Influence range is in order to reduce the computational resources required for the
computation.
44
A Grid Sensitivity Study
Figure 46- Energy report. Wake losses computed with wake model 1.For more information
concerning the AEP you can click on any Climatology or Gross AEP number on the table.

Referring to the AEP forecasted in the exercise a large difference can be noted in the AEP
predicted by the two climatologies, approximately 9 GWh/year.
Large parts of the discrepancy observed in the two predictions comes from the fact that this
exercise was run with WindSim EV, where there is a limit of 5000 cells; discretization errors
are therefore considerable. A typical procedure followed in CFD computations is to
continuously refine the grid in order to minimize the discretization errors. The ideal situation is
achieved when the errors are negligible, i.e. when grid independency has been reached.
In the following Figure the effects of grid sensitivity study on the AEP is given, obtained with
the grid refinements shown in the below table.
N
4 370
24 320
90 280
375 000
750 480
Nx
23
38
Ny
19
32
74
61
150
125
212
177
Nz
10
20
20
20
20
Figure 47 - Number of cells in models used for grid independency tests
45
1.
45
Figure 48 - Report panel for the Energy module, Hundhammerfjellet project (~5 000 cells).
46
Figure 52 - Report panel for the Energy module, Hundhammerfjellet project (~800 000 cells)
The AEP calculated with the five different models is summarized in Figure 53. Important
discretization errors are present when WindSim EV is used (~5000 cells). Considering a grid
independency reached with a model of 800 000 cells, a model comprising just 5 000 cells gave
errors of 20 % for one of the climatology data. The model of size 100 000 cells provided a good
estimation of the AEP, the errors could be considered within 3%; considering a grid
independency reached with 800 000 cells.
Its important to stress that the characteristics of a grid which is leading to grid independency
is its resolution. So, for wider areas, a higher number of cells are required to minimize the
discretization errors.
47
1.
47
Figure 53 - AEP for the two climatologies against number of cells used in the 3D models.
48
Configure Particle Traces in GLview Pro

Generation of the Wind Visualization File
How to generate a 3D wind visualization file (.vtf) in the menu3D Visualization is shown
below;
Figure 54 - The .vtf file is generated from the 3D Visualization menu on the toolbar
The generated .vtf file must contain the 3D velocity vector, which is the vector field used to
establish the particle traces.
1. Click 3D evaluation > Generate 3D wind visualisation file (.vtf). A DOS pop-up
window will appear.2. Type l to choose from the list of sectors.
3. Choose the sector 000 by simply pressing 000.
4. Type 1 to transfer the default variables to the .vtf file.
5. Open the 3D Visualization file by clicking 3D Visualisation>Open 3D wind
visualization file (.vtf) and then selecting the 000.vtf file.
Activate the VELOCITY_3D as vector by pressing the Apply button as shown in Figure 55.
The max and min values of the chosen scalar and vector fields will appear in the blue info
window in the lower right corner;
49
1.
49
Figure 55 - Set Vector to VELOCITY_3D and hit Apply in the dialogue box to the bottom left in the
screen above
Setting the Attributes

Zoom in towards the terrain of the model, as shown below. Rotate the model by using the right
mouse button. Then set the attributes of each part in the Change Part Attributes window
found under Model
Then the grid has to bet set invisible first by choosing grid and then unselecting the attribute
Visible. Finish the process by pressing the Apply button.
50
Figure 56 - Configure the view to display the relevant parts
In the Change Part Attributes the default setting of all parts which is Visible and Outline
mesh could be reset. Selecting all parts is done by clicking on the first part, while holding down
the shift key clicking on the last part.
While all parts are selected, uncheck the outline mesh box and check smooth shading to
give a better visual appearance (see Figure 56).
51
1.
51
Figure 57- Perfecting the visualization to your projects specific requirements is easy in WindSim!
Creating the Particle Traces

Before calculating particle traces you need to define the start positions for the traces. Each
trace represents the path of an artificial particle without mass following the wind field in a
passive manner. In order to get a good representation of the wind field it is convenient to
specify many traces. This is done by specifying the start positions within a box, with a given
number of start positions in x, y, and z direction. To open the window Particle Traces click
Vector > Particle tracing (see Figure 58).The dimension of the box will be model
dependent. In the model below the box is positioned towards the North border as the wind field
with incoming wind from North has been loaded (000.vtf).
The coordinates (X1,Y1,Z1) and (X2,Y2,Z2) represent the front left bottom point and the far
upper right point respectively. In order to specify the dimensions of the box, you need to set
these coordinates and then click Apply (see Figure 59).
52
Figure 58 - Open the dialogue box from the Vector menu on the toolbar
Figure 59 - Replicate the settings above to achieve the same particle traces
Under the folder Options the user can set the direction for the calculation of the traces. In the
given case the calculation is only done forward, as the box with starting point is put near the
inlet border therefore the traces will pass through most of the model.
53
1.
53
In some cases the default method for integrating the paths, the Euler method, will fail. If the
traces do not follow the terrain, but appears like straight lines pointing towards the sky, then it
is recommended to switch to the linear integration method.
Figure 60 - Set the direction of your particle traces
Animating the Traces

From the window Particle Trace the folder Startpoint should be chosen. Then by choosing
the Display Setup button in the upper right corner the window Particle Trace Display Setup
will open.
The setting for animating the particles are set in this window.
Check the box Animate to unlock the animation options.
Check the box Incremental trace
Uncheck the box Complete trace
Press the Apply button.
Try to animate using line (worm) by check the box Tail. Play with the settings and see what
works for your model.
54
Figure 61 - The user has full control over the simulation parameters to design an animation to
suit any project requirements
Textures
The final touch for your presentations is obtained by adding textures. Textures could be added
to the different parts. For example adding a satellite photo or a scanned map to the DTM
(Digital Terrain Model) would make it easier to recognize locations in the model. The only
purpose of the cylinder surrounding the model is to add a sky texture.
You can find Sky Textures at windsim.com under Library on the menu bar.
A texture is added to a part using the Change Part Attributes window introduced above.
Select the part and then click the button Texture. In the Texture Settings For Part(s)
window, a picture must first be loaded and then this picture must be pasted over the part from
a given direction, defined by the Plane. The picture is stretched over the part if the box
Clamp is checked. Otherwise a tile pattern is generated.
55
1.
55
Figure 62- Adding a sky texture greatly enhances the quality of the visualization
Save and Share

When you are satisfied with the setting, you can save all the settings to a new .vtf file in the
menu File Export to File VTF File. Send us your .vtf file and we will publish it at
windsim.com on our 3D Visualizations page. A .vtf file can be visualized in the free viewer
GLview Express found on the above web page.
Figure 63 - Just one example of the infinite customizability of WindSim visualization
56
Configure Isosurfaces in GLview Pro

Generation of the Wind Visualization File
Generate a 3D wind visualization file (.vtf) in the menu 3D Visualization following the same
procedure as in paragraph Configure Particle traces in GLview Pro at page 48.
Figure 64 - Locate the menu show above
The generated .vtf file must contain the 3D velocity vector, which is the vector field used to
establish the particle traces. Moreover, the .vtf has to contain the scalar variable that has to be
plotted as isosurface.
Open 3D Visualization file

Open the 3D wind visualization file (.vtf) in the menu 3D Visualization. Activate SPEED_2D as
Scalar by pressing the button Apply, then the min and max values of the chosen scalar fields
will appear in the blue info window in the lower right corner (see Figure 65).
57
1.
57
Figure 65 - Set the Scalar to SPEED_2D and hit Apply
Setting the Attributes

Zoom in towards the box and rotate the model by using the mouse buttons. Then set the
attributes of each of the parts in the Change Part Attributes window found under Model
Change Part Attributes. First the grid has to bet set transparent by selecting the grid and
check the attribute Transparent then press the button Apply (see Figures 66 and 67); then
the transparency level has to be put to the maximum value (0.0), click on the Material button
to set the transparency to 0.0 as shown in Figure 68, then click on OK and Apply to confirm.
58
Figure 66 - Open the Change Part Attributes dialogue box
Figure 67 - Replicate the selections made above
Figure 68 - Open the Material Properties box by clicking the Material... button
Creating the Isosurfaces

Select the Isosurface... option under the [b]Scalar[/b] menu (see Figure 69). Select the value
of the loaded scalar that you want to display and press [b]Apply[/b], as shown in Figure 70.
Rotate and zoom with the mouse to obtain a good view of the flow field.
59
1.
59
Figure 69 - Open the Isosurface dialogue box from the Scalar menu
Figure 70 - The above value generates a nice plot for the Hundhammaren project
Figure 71 - The Isosurface is now displayed relative to the terrain to visualize the flow in the wind farm
Textures - Save and Share

For adding textures and sharing data with others see the procedures described in the above
section Configure Isosurfaces in GLview Pro.
60
Figure 72 - A texture adds a nice touch to the graphics for use in presentation and reports!
61
1.
61
Add-on Module: Terrain Editor

The WindSim Terrain Editor functions as a separate application and allows you to efficiently
load and prepare terrain and roughness data from a variety of sources. You can load terrain
and roughness data, georeference photographs for backdrops, digitize and save roughness
features, utilize advanced datasets such as canopy height and then export the data directly
into the WindSim format.
New Project
You can start the WindSim Terrain Editor from inside WindSim or from the Start menu.
When you start Terrain Editor from Tools > Terrain Editor the window below will appear.
Please choose the image for your area. If you dont have an image, press cancel and a blank
image is used. The digital terrain model (.gws file) used for the project is the same as your
current WindSim project.
Figure 73 - Locate an image of the area in the project you have opened in WindSim.
Starting the application from the Start menu opens the program with no files loaded. You then
start a new project from the File menu and load the necessary files as shown below:
62
Figure 74 - Creating the new project and loading the terrain height and background photo. Main path
is: C:\Program Files (x86)\WindSim\WindSim 7.0.0\Data. The terrain can also be left blank here and
then imported via the Tools menu, along with separate files for roughness height or canopy/vegetation
height.
After this initial step, the procedure is the same regardless of how you opened the Terrain
Editor.
Georeferencing
When you have loaded the image, you must specify 3 coordinates to be able to georeference
the image. Place these 3 GCPs (Ground Control Points) using the toolbox as shown below.
Simply click the symbol shown below in the toolbox and then click on the image where you
want to specify the coordinates. This x- and y-coordinate must be the same format as specified
in your terrain model (.gws file)
63
1.
63
Figure 75 - Press the button illustrated above to place the GCPs.
In this example we use three points at the edge of the domain. For each GCP the user specifies
these known coordinates in the properties section.
Figure 76 - For each GCP, the user must specify the real coordinates in the Properties pane in the
lower right of the Terrain Editor window.
You click with the mouse into the lower left corner and enter 322950 and 7182475 as
coordinates. After that you click into the lower right corner and enter 332000 and 7182475 and
then you click into the upper right corner and enter 332000 and 7190025 as coordinates. When
all coordinates are defined, click on the globe icon in the toolbox as shown below to geo
reference your image.
64
Figure 77 - The far right icon finalizes the geo referencing process.
Please wait while the georeferenced image is redrawn.
Figure 78 - Depending on the speed of your system and the size of the image file, you might have to
wait for a few minutes while the image is georeferenced.
When the geo referencing is completed, you will be able to see your image together with the
digital terrain module. Use the Height and Roughness scrollers to adjust the transparency
65
1.
65
of the height and roughness layers. You can now verify visually that the terrain module matches
your image.
Figure 79 - Changing the transparency of the different layers help you verify that the changes you are
making are correct.
Draw roughness
You can now draw additional roughness polygons with the drawing tool. The roughness you
draw will overwrite existing roughness from the digital terrain model in the area bound by the
edges of the polygon.
1. To draw a new polygon select the Draw roughness icon from the Toolbox.
2. Select the corners of each polygon.
3. After you have finished drawing, right-click anywhere on the screen to confirm.
4. Specify the roughness height for the area in the Properties window.
5. If you want to delete your polygon, choose the Select icon from your Toolbox, click
on the polygon and press delete on your keyboard.
6. Repeat the steps 1 to 3, to draw another polygon.
66
Figure 80 - Click the second icon from the left to draw customized, detailed roughness descriptions
based on images of your site.
When the drawing is ready you must merge them with the existing roughness dataset using:
Tools -> Merge roughness layers. Your drawings will overwrite exiting roughness.
Figure 81 - Merge roughness commands brings all roughness into one layer.
67
1.
67
To see the newly created terrain image, export it and then re-open it. Notice that WindSim will
not allow you to export the terrain file in the current project.
Export
You can export the map image to a .bmp file with Export -> Export map image
You can export the dataset to a new .gws file with Export -> Terrain (.gws)
When working with a Terrain Editor project the terrain dataset is stored in a separate .gws file
in the same folder as the project .wspdb file. When you save your work, the .gws file is updated.
Undo/Redo
Its possible to undo/redo your last changes. Select from Edit->Undo/Redo, or using shortcuts.
Change map image

You can change the background image by right clicking the existing image name and then
Change image.
68
Add-on Module: Remote Sensing Correction Tool

The Remote Sensing Correction Tool corrects LIDAR measurements. It uses the LIDAR 10
minutes averages. The method is using the vertical wind speed variation calculated by
WindSim to correct the LIDAR measurements. LIDAR systems use the assumption of a
homogeneous wind field for converting the measured radial wind speed into horizontal wind
speed. In complex terrain this assumption is not valid and a correction is necessary.
The Terrain module used for the Remote Sensing Correction Tool should be built after the
following rules:
Vertical resolution
The vertical resolution should be around 10m up to the highest measurement height
of the LIDAR. This might be achieved by using a refinement file and using more than
one height distribution factor in the vertical.
Horizontal resolution
The horizontal resolution should be in the range of 10 m. This allows modeling an
area of 4x4km with the current WindSim version which is considered suitable.
Terrain Smoothing Limit
The simulation should be run without smoothing to guarantee that the vertical wind
speeds are simulated in the right way.
Orthogonalization of the Grid
This option should not be used to make the extraction of the results possible.
Forests
Can be used as an option.
Nesting
Might be considered if the complexity of the site makes it necessary to take into
account mesoscale effects.
The Remote Sensing Correction Tool can be started from the Tools menu in WindSim.
69
1.
69
Figure 82- Opening of the Remote Sensing Correction Tool.
A dialogue will pop up where the specifications of the LIDAR have to be set.
Figure 83 - LIDAR specifications
70

Data files
The sta files (LIDAR 10 minutes data) are often delivered on a daily basis. For the correction
period they have to be merged into one single file with one header. A routine for that can be
found under the installation folder of WindSim (bin/Modules/RemoteSensingCorrectionTool).
The executable cat_together_sta.exe should be copied and executed in the folder where all
daily .sta files are stored. This folder should not contain sub folders. The resulting input.sta
data file is then the file which should be used for the correction.
The single .sta data files have to be in ascii format. A conversion routine from binary to ascii
format can be obtained from Leosphere if it is necessary.
Angles
The scan angle and the direction offset angle are given in the header information of the rtd file.
Levels
The measurement heights have to be given here. They can be found under "Altitudes" in the
header of the LIDAR files. All heights have to be specified. The corrected measurements can
be written in .tws format that they are easily usable in WindSim. You can specify the levels for
which you want to write out the .tws files.
Position
The position of the LIDAR can be given either in global or in local coordinates
Wind Field
The number specifies which sectors are used for the LIDAR correction. The sectors are
calculated by the following formula: INT(360/number). You need to make sure that these
sectors have been run successfully in the WindSim project otherwise the correction will fail. In
case of difficult terrain it is of advantage to use more than the standard of 12 sectors.
Output
The corrected LIDAR data can be exported directly to WindSim's tws format and used as a
climatology in a WindSim project. Beside of this a file is written which contains the corrected
wind speed for all measurement heights.
Data Filtering
The 10 minutes LIDAR data have been filtered by Leosphere already and no further correction
is necessary.
After all fields have been filled in correctly press the "NEXT" button. The correction will be
71
1.
71
started and may take up to one hour to complete. The result file can be found under the
climatology folder of the project which is used for the correction.

WindSim - Getting Started

Uploaded by

Copyright:

Available Formats

WindSim - Getting Started

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

WindSim - Getting Started

Uploaded by

Copyright:

Available Formats

Getting Started

WindSim | Getting Started

2015 WindSim AS | DUPLICATION PROHIBITED WITHOUT PRIOR PERMISSION

EXPLANATION OF CONTROLS & NOMENCLATURE ............................................ 5

TUTORIAL PROJECT: HUNDHAMMERFJELLET ................................................. 14

A GRID SENSITIVITY STUDY ................................................................................. 44

CONFIGURE ISOSURFACES IN GLVIEW PRO ..................................................... 56

ADD-ON MODULE: TERRAIN EDITOR .................................................................. 61

ADD-ON MODULE: REMOTE SENSING CORRECTION TOOL ............................ 68

Figure 1 - WindSim is a modular based Wind Farm Design Tool (WFDT)

2015 WindSim | DUPLICATION OF THIS DOCUMENT IS PROHIBITED WITHOUT PRIOR PERMISSION

About the Technology

This behavior is captured by a CFD method. Even for

For an inclination angle above 20 degrees (Case C)

the flow separates. The recirculation acts as an

extension of the terrain, the ridge becomes more like

a plateau and the speed-up is reduced.

The Navier-Stokes equation is time averaged

turbulence model is required to close the equation

Figure 2 - Upstream speed-up, (Speed hill

integrated with a finite-volume procedure.

There are various solvers and solver strategies

2015 WindSim | DUPLICATION OF THIS DOCUMENT IS PROHIBITED WITHOUT PRIOR PERMISSION

WindSim EV versus the WindSim Commercial Version

It smoothes the features of the given height and roughness data

It introduces significant discretization errors

Get the Microsoft .NET Framework 4 here.

2015 WindSim | DUPLICATION OF THIS DOCUMENT IS PROHIBITED WITHOUT PRIOR PERMISSION

Explanation of Controls & Nomenclature

The WindSim logo

Name of the program: WindSim

Name of the current project

Name of the current layout

Figure 3 - Title bar.

Figure 4 - Menu bar.

2015 WindSim | DUPLICATION OF THIS DOCUMENT IS PROHIBITED WITHOUT PRIOR PERMISSION

Explanation of Controls & Nomenclature

Create a new project

Create a new copy of the current project

Create a new copy of the layout(1) for the

Open a layout(1) belonging to the current

List of the recently used projects

Remove the current project

Remove the current layout belonging to

Print the currently displayed page

Preview the currently displayed page

Save the current project

Reset the properties to the state before

Open a window with summarized main

2015 WindSim | DUPLICATION OF THIS DOCUMENT IS PROHIBITED WITHOUT PRIOR PERMISSION

create a new layout as a copy of the

List of loaded layouts

Terrain texture file

tick off the layout you want to activate

Load a .bmp or .rgb texture to paste over

List of loaded textures

tick off the texture you want to activate

Generate 3D wind visualization file (*.vtf)

Generate a wind visualization file