Sika PDS E Sikagard-950

Product Data Sheet
Version 25/04/2014 (Corporate : Edition V.6, 07/2012)
Sikagard-950
Construction
UV Resistant Coloured Coating for Sikaplan and Sarnafil Roof

Waterproofing Membranes
Product
Description
Sikagard-950 is a waterborne two part, coloured polyurethane coating.

It has a flexible resin binder with PVC plasticizer blocking properties.
Uses
To provide a chemically resistant coating film with good mechanical

resistance on mechanically fixed or bonded Sikaplan and Sarnafil PVC
or FPO roof waterproofing membranes where different surface colours are
required i.e. architectural features / design or roof graphics.
Characteristics /
Advantages

Good opacity

UV-resistant

High flexibility

Good mechanical properties and chemical resistance

Odourless

PVC plasticizer blocking properties

Easy application by brush, roller or spray
Tests
Approval / Standards

DIN 53151; EN ISO 2409; ASTM D 2794; ASTM D 3002
Product Data
Form
Consistency
Liquid
Colours
Semi gloss / semi matt

Standard colour shade groups:
RAL 1004, 1032, 6027, 1028, 3020
Other colour shades are available on request.
Packaging
Combined containers:
Part A: 7.0 kg
Part B: 3.0 kg
Storage
Storage Conditions
Store in dry conditions at temperatures between +5C to +30C.
Shelf Life
12 months from date of production if stored properly in original, unopened

and undamaged sealed containers. Expiry date on container.
Sikagard-950 1/4
D01914000414E
Technical Data
Chemical Base
Aliphatic polyurethane
Density
Part A: ~ 1.0 kg/l (+23C)

Part B: ~ 1.0 kg/l (+23C)
Solid Volume
Dependent on colour shade
Solid Content
~ 50% 70%
Viscosity
Part A:
Part B:
Compound:
Layer Thickness
100 m (with consumption of 0.2 kg/m2)
~ 300 - 600 mPas

~ 300 - 450 mPas
~ 400 - 800 mPas
System
Information
System Structure
One layer system

Cleaning / Primer:
Single layer:
See Substrate Preparation

Sikagard-950 min. 0.20 kg/m2
Two layer system

Cleaning / Primer:
Base layer:
Top layer:

Three layer system

Cleaning / Primer:
Base layer:
Intermediate layer:
Top layer:

Application Details
Consumption
5 m2 to 8 m2 per kg and coat dependent on system as above.
Substrate Quality
The membrane surface must be clean and dry, free from all contaminants
including dust, oil, grease, coatings, surface treatments etc.
Substrate Preparation
Sikaplan PVC Membranes

Cleaning:
Sika-Trocal Cleaner 2000
Rinse with:
Water
Primer:
SikaplanFPO Membranes
Cleaning:
Rinse with:
Water
Primer:
Sikalastic Primer FPO
Sarnafil G/S PVC Membranes
Cleaning:
Rinse with:
Water
Primer:
Sarnafil T FPO Membranes
Cleaning:
Rinse with:
Water
Primer:
Sikalastic Primer FPO
After cleaning with Sika-Trocal Cleaner 2000 the membrane surface has
to be rinsed with water. Let the membrane surface dry completely before
the Sikalastic Primer FPO or Sikagard 950 caoting is applied.
Sikagard-950 2/4
Processing
Requirements /
Limits
Compatibility
Application only on membranes listed in the Product Data Sheet.
Ambient Temperature
At least +10C / +35C
Substrate Temperature
At least +10C (min. +3C above dew point) / +35C
Substrate Moisture
Dry surface without condensation
Relative Air Humidity
~ 75% max.
Dew Point
Beware of condensation!
The substrate and uncured coating must be at least 3C above dew point
to reduce the risk of condensation or blooming on the finish.
Processing
Mixing
Part A: 7 parts by weight

Part B: 3 parts by weight
Mixing Time
Stir part A thoroughly prior to mixing. Add part B and mix together thoroughly
with a power stirrer (~ 300 rpm - 400 rpm).
Mixing time at least 3 minutes until a homogeneous mixture is achieved.
Pour the mixed material into a clean container and mix again to ensure
complete mixing.
Pot Life
Temperature
Time
+10C
~ 150 minutes
+20C
~ 120 minutes
+30C
~ 50 minutes
Note: The times are approximate and will be affected by changing ambient
conditions. Do not use material which is over the pot life.
Waiting Time /
Overcoatability
Temperature
Minimum
+10C
6 hours
+20C
~ 4 hours
+30C
Note: If the maximum waiting time of 8 hours is exceeded it is necessary

to lightly abrade the surface.
The times are approximate and will be affected by changing ambient conditions.
Application Method
Sikagard-950 may be applied by brush or roller or airless spray.
Notes on Application /
Limitations
Freshly applied Sikagard-950 must be protected from damp, condensation

and water for at least 8 12 hours.
Applied Sikagard-950 must not be tread on for at least 3 hours after
application (light foot traffic only).
During curing time until overcoatable condition the min. temperature may
not drop below +8C.
Tool Cleaning
Clean tools and application equipment with water immediately after use.
Hardened / cured material can only be removed mechanically.
Hardening
Sikagard-950 3/4
Hardening Time
Dust free after:

Overcoatable after:
Fully cured after:
Value Base
All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
Local Restrictions
Please note that as a result of specific local regulations the performance

of this product may vary from country to country. Please consult the local
Product Data Sheet for the exact description of the application fields.
Health and Safety

Information
For information and advice on the safe handling, storage and disposal of
chemical products, users shall refer to the most recent Safety Data Sheet
(SDS) containing physical, ecological, toxicological and other safety-related
data. REACH relevant information is available in the most recent SDS.
Construction
180 minutes
8 hours
5 days
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith
based on Sikas current knowledge and experience of the products when properly stored, handled and applied under normal conditions in
accordance with Sikas ecommendations. In practice, the differences in materials, substrates and actual site conditions are such that no
warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever,
can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product
must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products.
The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must
always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Sika (Thailand) Limited

Head Office
700/37 Moo 5 Amata Nakorn Estate
Bangna-Trad KM.57 Tambol Klong Tamhru
Muang District Chonburi Thailand 20000
Tel : +66 3821 4270-85

Fax : +66 3821 4286
E-mail : sikathai@th.sika.com
www.sika.co.th
Sikagard-950 4/4

Sika PDS E Sikagard-950

Uploaded by

Copyright:

Available Formats

Sika PDS E Sikagard-950

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sika PDS E Sikagard-950

Uploaded by

Copyright:

Available Formats

Product Data Sheet

Version 25/04/2014 (Corporate : Edition V.6, 07/2012)

UV Resistant Coloured Coating for Sikaplan and Sarnafil Roof

Sikagard-950 is a waterborne two part, coloured polyurethane coating.

To provide a chemically resistant coating film with good mechanical

Semi gloss / semi matt

Store in dry conditions at temperatures between +5C to +30C.

12 months from date of production if stored properly in original, unopened

Part A: ~ 1.0 kg/l (+23C)

Dependent on colour shade

100 m (with consumption of 0.2 kg/m2)

~ 300 - 600 mPas

One layer system

See Substrate Preparation

Two layer system

See Substrate Preparation

Three layer system

See Substrate Preparation

5 m2 to 8 m2 per kg and coat dependent on system as above.

Sikaplan PVC Membranes

Application only on membranes listed in the Product Data Sheet.

At least +10C / +35C

At least +10C (min. +3C above dew point) / +35C

Dry surface without condensation

Relative Air Humidity

Part A: 7 parts by weight

Note: If the maximum waiting time of 8 hours is exceeded it is necessary

Sikagard-950 may be applied by brush or roller or airless spray.

Freshly applied Sikagard-950 must be protected from damp, condensation

Dust free after:

Please note that as a result of specific local regulations the performance

Health and Safety

Sika (Thailand) Limited

Tel : +66 3821 4270-85

You might also like