Aiphone GT Multi Tenant Video Intercom Guide
Aiphone GT Multi Tenant Video Intercom Guide
www.cleverhome.com.au
GT Entrance Stations
Two types of entrance stations are available for the Aiphone
GT video intercom system, Integrated and Combined:
Integrated Entrance Stations on a single flush-mount
stainless steel plate (i.e. the GT-DM), which includes a 170
wide (and 100 high) angle digital PTZ video inter-intercom
camera, 10 key keypad, 3.5 colour LCD display (for a
greeting message, tenant names and numbers, and system
status), motion sensor, and voice annunciation.
Combined Entrance Stations with semi-flush mount
interchangeable steel faceplate modules, that mount within
different size and shape steel frames. The modules available
for Combined type entrance stations include the:
Camera module (GT-VA) with 170 wide (and 100
high) angle digital PTZ .
Audio Speech module (GT-DA) that supports voice
annunciation, and which can be used with or without
the GT-VA camera module,
10 key module (GT-10K),
Switch module (GT-SW) with 4 directory cards and 4
direct call buttons, and call button panels with 1, 2, 3
or 4 buttons as an alternative to the GT-10K when
there are less than 4-8 tenants, and
Name Scrolling module (GT-NS) with VFD display for a
greeting message, tenant names and numbers, and
system status.
Prox card reader modules that
may be used with the Combined
Type GT entrance stations
(GF-HID, GF-HID-I, GH-XP).
Aiphone GTV-DES202
Aiphone GTA-DES
Aiphone GT-DM
Aiphone
GTV-DES104
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
GT Door Stations
Are GT Door Stations different to GT Entrance Stations?
Yes. While GT entrance stations are located at the entrance to a building, set of
units, or office complex, and allow a visitor to contact any one of the many tenants,
GT door stations:
Are located immediately outside the tenant's door.
Allow a visitor standing outside a tenant's door to contact that tenant only.
Use different video intercom modules than entrance stations.
Can replace old-style tenant door peep holes.
Only work with Aiphone GT-2C master monitor stations.
A GT door station may only be used outside an apartment, unit, or office, if the GT
master monitor station used by that tenant is an Aiphone GT-2C. Other GT master
monitor stations do still however support a door bell button located immediately
outside the tenant's door (as does the GT-2C as well).
There are four different door stations that may be used with the GT video
intercom system.
Video intercom camera door stations from the single residence Aiphone JK Series
may be used with the GT-2C master monitor station, when placed immediately
outside the tenant's door. Choose from the flush mount stainless steel plate JK-DVF
door station, the JK-DV surface mount zinc die-cast (left) door station, or the plastic
surface mount JK-DA. All of these JK door stations feature a 170 wide angle digital
PTZ camera, similar to that used in the GT video intercom entrance stations.
If the tenant requires an audio-only door station, then the Aiphone GT-D door
station may be used.
Aiphone GT-D
Audio-only
Door Station
Aiphone
JK-DA Door
Station
Aiphone
JK-DV Door
Station
Aiphone JK-DVF
Door Station
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
www.cleverhome.com.au
Aiphone
GT-1A
Audio
Monitor
Aiphone GT-1D
Audio Monitor
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
GT monitor stations have one or two Options connectors on their back, which have
the pin-outs and functions identified below.
Door Bell input allows a door bell button located immediately outside the tenant's
door to be connected to the tenant's master monitor station. The door bell should
have contacts that are normally open, and be non-latching (momentary action).
Emergency Alarm Input allows connection of a switch to generate a security
alarm. Switch contacts should be normally closed, and be latching.
Security/Utility inputs 1 to 3 allow connection of security sensors or switches for
Aiphone Security Suite support, or other utility functions.
Doctor Call Input allows connection to a switch to automatically allow entry of a
doctor or other emergency service. generate a security alarm. Switch contacts
should be normally closed, and be latching.
Option Contact output may be used to activate lights or an external call buzzer,
using the GT-RY relay to buffer the Option Contact output.
Video Out output provides an NTSC direct video signal for displays <3m away.
Only live video is sent to the Video Output, there is no video output when viewing
previously recorded pictures, or menu pages. CCTV integration support is
provided by via this NTSC video output, and Display Transfer output relay
contacts that may be used to activate external monitors via an optional GT-RY
external signalling relay. Both of these outputs are accessed using the 4 pin option
connector on the back of the GT-2C master stations. This connector is not provided
with the GT-2C, even though the 12 pin option connector is.
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
There are two different system configurations, the Standard Configuration for
smaller systems, and the Expanded Configuration for larger systems. The
maximum capacities for each type of GT video intercom system configuration are
compared in the table below.
Maximum Supported
Standard
Configuration
Expanded
Configuration
Entrance Stations
5 (3 per trunk)
3 if a door release button
is connected to a direct
select type entrance
station.
16 (8 per trunk)
N/A
Concierge/Security Guard 2
Stations
Tenant Stations
4 (2 monitor stations)
4 (2 monitor stations)
6 per trunk
N/A
Sub-master Stations
www.cleverhome.com.au
GT Standard Configuration
The Standard Configuration for a GT video-intercom system is illustrated below.
The configuration from the residence (or tenant) trunk lines to the tenant monitor
stations is the same for the Standard and the Expanded Configurations, and is
illustrated is a subsequent section.
The video output from the video entrance station is connected to the GT-VBC Video
Bus Control Unit, which has 6 trunk line outputs.
The audio and control output from the entrance station is connected to the GT-RC
Bus Control Unit, and then out to 6 trunk lines from a Distribution Point (that must
be provided by the installer).
The separation of the video and audio/control distribution allows an audio
intercom-only system to be implemented by omitting the video component of the
modular entrance station, the GT-VBC, and all of the video distribution cabling.
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
GT Expanded Configuration
The Expanded Configuration GT system uses the GT-VBX Expanded Video Bus
Control Unit and the GT-BCX Expanded Bus Control Unit to provide 4 additional
sub trunk lines, allowing up to 4 sets of GT-VBC and GT-BC control units (the same
units used in a Standard Configuration GT system) to be used instead of just one
set. The GT-VBX and GT-BCX must be mounted adjacent to each other, as their
interconnecting cable is only 40cm long.
Two additional GT-BC Bus Control Units are also able to be used to provide two
sets of trunk lines for entrance stations and concierge/security guard stations.
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
GT Tenant Configuration
The below residence/tenant configuration diagram applies for the video and
audio/control trunk lines emerging from the BT-VBC and GT-BC units in both the
Standard and the Expanded GT Configurations. Star wiring from a trunk line to a
set of 4 adjacent tenant monitors requires a GT-4Z 4-way Video Junction Unit, but
tenant station-to-station wiring does not require any additional GT-4Z.
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au
CLEVERHOME
Copyright 2011 Clever Home Pty Ltd 20 Boronia Avenue Croydon South VIC 3136 ABN89088227865 Fax 9733 1254 Ph 9722 9210 inquiry@cleverhome.com.au
www.cleverhome.com.au