Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 175 views

    DC Dst2700

    Uploaded by

    muhammad arif
    The DST2700 is a microprocessor-based gen set control card designed to simplify electric panel manufacturing. It includes power relays, fuses, and an emergency stop button. An external battery charger can be connected, and the DST2700 monitors electrical measurements, engine parameters, and provides generator and engine protections. It has communication interfaces, computed measures, and controls start/stop of gensets aimed at charging external batteries.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DC Dst2700

    Uploaded by

    muhammad arif
    175 views2 pages
    The DST2700 is a microprocessor-based gen set control card designed to simplify electric panel manufacturing. It includes power relays, fuses, and an emergency stop button. An external battery charger can be connected, and the DST2700 monitors electrical measurements, engine parameters, and provides generator and engine protections. It has communication interfaces, computed measures, and controls start/stop of gensets aimed at charging external batteries.

    Original Description:

    sices

    Original Title

    Dc Dst2700

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The DST2700 is a microprocessor-based gen set control card designed to simplify electric panel manufacturing. It includes power relays, fuses, and an emergency stop button. An external battery charger can be connected, and the DST2700 monitors electrical measurements, engine parameters, and provides generator and engine protections. It has communication interfaces, computed measures, and controls start/stop of gensets aimed at charging external batteries.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    175 views2 pages

    DC Dst2700

    Uploaded by

    muhammad arif
    The DST2700 is a microprocessor-based gen set control card designed to simplify electric panel manufacturing. It includes power relays, fuses, and an emergency stop button. An external battery charger can be connected, and the DST2700 monitors electrical measurements, engine parameters, and provides generator and engine protections. It has communication interfaces, computed measures, and controls start/stop of gensets aimed at charging external batteries.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Gen set control unit

    DST2700
    AMF Gen set control card

    DST2700 is a microprocessor
    based controller designed to
    make easier electric panel
    manufacturing.
    It inherits some solutions
    from DST2600 integrated
    control panel.
    Only the power circuits and
    the battery charger are not
    embedded in the device.
    It includes: power relay for
    cranking and fuel solenoid,
    all the standard required fuses,
    emergency
    stop
    mushroom pushbutton.
    Battery charger is to be
    connected
    directly
    to
    DST2700. External battery
    charger allows to select the
    appropriate device for the
    application, both for power and voltage.
    DST2700 include all the standard features of SICES control board: display LCD (16x2 with 10mm
    characters for high readability, for this application), electrical measures on all the phases, true RMS
    measures on generator, power and energy computation, engine measure, engine and generator
    protections. As standard, an RS232 interface port is available and optionally a CAN interface with
    J1939 protocol can be embedded.

    Measures

    REV.1

    Mains Voltages
    L1-L2, L2-L3, L3-L1
    Lx-N max. voltage < 300Vac cat. IV
    Generator Voltages:
    L1-L2, L2-L3, L3-L1, True RMS measure.
    Lx-N max. voltage < 300Vac cat. IV
    Generator Currents:
    L1, L2, L3, True RMS measure.
    Nominal max. current: 5Aac
    Overload measurable current : 4 x
    (sinusoidal)
    Generator Frequency meter:

    Resolution = 0.1 Hz.


    Battery Voltmeter:
    Resolution = 0.1V
    Oil Pressure Gauge:
    VDO 0-10 Bar, VDO 0-5 Bar, Veglia 0-8 Bar
    Water Thermometer:
    VDO, Veglia, BERU (optional 0-10V input)
    Fuel Level:
    VDO, Veglia
    5Aac

    Technical characteristics
    Computed Measures
    Active power meter, Reactive power meter, Apparent
    power meter, power factor: Total and phase by
    phase
    Active and reactive energy counter
    Hour counter, hour counter for maint./rental, Start
    Counter

    Engine Protections
    Overspeed, coolant temperature by ON/OFF, oil
    pressure by ON/OFF, fuel level (warning available),
    belt break, maximum deliverable power, overcrank
    and start failure.

    Generator Protections
    Underfrequency (81U), Overfrequency (81O),
    Undervoltage (27), Overvoltage (59), Power direction
    (32), Time dependent overcurrent (51), Instantaneous overcurrent (50), Phase sequence, Current and
    Voltage unbalance, rated conditions failure.

    Input, Output and Auxiliary


    functions
    Embedded alarm horn.
    6 programmable digital inputs
    2 relays (8A) outputs
    2 relays (40A) fuel valve and start

    As optional, its available a 48V version of DST2700,


    particularly used when the genset controller has to
    monitor a genset aimed for charging a set of external
    batteries.
    DST2700 controls the voltage of a set of external
    batteries and, in case of the voltage drops under a
    settable value, starts the stand-by genset which works
    to recharge the batteries.
    DST2700, checking either voltage and current of
    batteries, stops the genset when proper values are
    reached.
    Actually this version of DST2700 is available for Single
    phase gensets only.

    Other Technical data


    Nominal Auxiliary Voltage: 12/24V (switch selectable)
    Auxiliary supply voltage: 7,5..15 Vdc/15..32Vdc
    LCD: transflective with LED backlight; 16x2
    characters, 10mm.high
    Operating temperature: -20 C to 60 C
    Weight: less than 1.2Kg
    Overall dimension: 270x220x75mm (LxHxP) (not
    included emergency pushbutton and connectors)
    Panel mounting: by means stud-bolt
    EMC: conform to EN61326-1
    Built in conformity to EN61010-1

    Interface
    N.1 RS232 serial port with MODBUS RTU protocol
    CAN interface with J1939 protocol for engine management (optional)

    S.I.C.E.S. S.R.L.
    Via Molinello 8/B - 21040 Jerago con Orago (VA) Italy
    www.sices.eu - sales@sices.eu

    Tel +39 331 212941


    Fax.+39 331 216102

    You might also like