Professional Documents
Culture Documents
Manual For Einhell
Manual For Einhell
USER GUIDE
Important: retain for future reference - please
read carefully.
Now you have purchased a WORKZONE product
you can rest assured in the knowledge that as
well as your 1 year parts and labour guarantee
you have the added peace of mind of dedicated
helplines and web support.
service.australia@einhell.com
08/2013
Welcome Section
Congratulations on choosing to buy a WORKZONE product.
All products brought to you by WORKZONE are manufactured to the highest standards of performance
and safety, and, as part of our philosophy of customer service and satisfaction, are backed by our
comprehensive 1 Year Warranty.
We hope you will enjoy using your purchase for many years to come.
Table of Contents
1.
Safety Rules
Pg. 5
2.
Layout/Items Supplied
Pg. 7
3.
Intended Use
Pg 7
4.
Technical Data
Pg. 7
5.
Assembly
Pg. 7
6.
Operation
Pg. 8
7.
Pg. 8
8.
Pg. 8
9.
Storage
Pg. 8
2
AFTER SALES SUPPORT
service.australia@einhell.com
1
9b
7
3
1
8
9a
9
1
5
d
e
4
4
f
2
a
3
AFTER SALES SUPPORT
service.australia@einhell.com
1a
4a
4b
4c
3b
3a
9a
9b
3
4
AFTER SALES SUPPORT
service.australia@einhell.com
1. SAFETY RULES
22. Always pull out the power plug when not in use, before
carrying out any maintenance work and before fitting
or removing the tool from the stand.
29. Use the accessory parts and electric tools for their
intended purpose only.
30. Check to see if the accessory parts are not damaged.
Also make sure the moving parts of the clamping
device and safety guard are working correctly.
13. Make sure that the power cable is a safe distance from
the cutting-off wheel and the working area.
14. Do not use the angle grinder stand with highperformance electric tools that are not suitable for the
accessory device.
12. Check in regular intervals that all screws, nuts and bolts
are fastened securely enough.
5
service.australia@einhell.com
Caution.
Read the operating instructions to reduce the risk of injury.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
6
AFTER SALES SUPPORT
service.australia@einhell.com
2. LAYOUT/Items Supplied
4. Technical data
Disc Diameter
1.
Spark protection
2.
Base plate
115/125mm
2.5kg
30mm
Weight 3.1kg
4.
5.
Swing arm
6.
Handle
7.
Cable holder
8.
Wear Gloves
Residual risks
Open the packaging and take out the equipment with care.
Remove the packaging material and any packaging and/or
transportation braces (if available).
Important!
The equipment and packaging material are not toys. Do not
let children play with plastic bags, foils or small parts.
1 x Clamping Device
1 x Instruction Manual
1 x Warranty Certificate
1 x Warranty Sticker
3. Intended use
Mount the handle (6), the two holders for the angle grinder
(8) and the two adjustments screws (9)as shown in Fig. 3.
7
AFTER SALES SUPPORT
service.australia@einhell.com
Tighten the adjustment screws (9) to fix the angle grinder into
place and prevent it from moving. Fold the spark protection
(1) to the front and fix the cable of the angle grinder into the
cable holder (7).
6. Operation
After finishing the cut, slowly move the angle grinder back
into starting position. Switch off the angle grinder.
9. STORAGE
7. CLEANING, MAINTENANCe
& ORDERING OF SPARE
PARTS
Always pull out the power plug before starting any cleaning
work.
7.1 Cleaning
7.2 Maintenance
There are no parts inside the equipment which require
additional maintenance.
08/2013
I.-Nr.: 11012
Art.-Nr.: 44.310.43
8
AFTER SALES SUPPORT
service.australia@einhell.com