19-5 The Magic Wand
19-5 The Magic Wand
19-5 The Magic Wand
A flat surface made of a refractory material such as transite-2 (in other words,
Spatula or spoon
Safety:
Mixtures of Potassium Chlorate and combustibles (sugar) are potentially explosive. Store
these chemicals separately. Wear safety goggles, disposable gloves, and heavy gloves (ex.
leather, acid gloves).
Sulfuric acid is extremely corrosive. Wear safety goggles, disposable gloves, and acid
gloves.
Stand at a distance from the reaction.
Procedure:
Carefully mix potassium chlorate and sugar together in the plastic container.
Pour the mixture into a pile onto the transite pad.
Make a small depression in the top of the pile with the spatula.
Dip the glass rod into a small amount of sulfuric acid so that there is a very small
amount (a drop) of acid on the tip of the rod.
19-5
Put drop of acid into the depression in the pile of KClO3 and Sugar (touch the pile
with your magic wand).
Stand back and the reaction will start slowly, evolving smoke and then flames.
Clean-Up: Allow the leftover black carbon to cool and then flush down the drain with
water.
Background: The stoichiometry of the reaction between KIO3, H2SO4, and sugar is not
known. Chloric acid (HClO3), an explosive gas, is formed when KClO3 and H2SO4 are
mixed. Chloric acid decomposes organic substances such as sugar very rapidly, often with
inflammation.
Notes:
This demo is done in the Magic Show.
Option:
Mix 10 g of KClO3, 10 g of icing sugar, and 20 g of Sr(NO3)2 or 20 g of Ba(NO3)2 or 20 g
of NaNO3 to add red, green (?), or yellow color to flame.
Gummi Bears
Safety shield
Bunsen burner
Striker
Procedure:
Set up a safety shield, ring stand, and test tube clamp. Put fire proof tile below.
Place about 1-2 grams of potassium chlorate solid into the Pyrex test tube. Put the test
tube in the test tube clamp. Position the bunsen burner under the test tube. Heat the
KClO3 until it melts and starts to decompose (bubbles will become visible within the
liquid). As soon as the solid KClO3 is completely melted, shut off the gas, and drop a
Gummi Bear into the tube and stand back.
19-5
Safety: Potassium chlorate is a strong oxidizer. Use care when heating it. Wear insulated
gloves, lab coat, and goggles. Be sure to set up safety shield between the reaction and the
audience. Be sure to put the fire proof tile below the reaction. Have a fire extinguisher
handy.
Clean-up: After the reaction has stopped and the test tube is cool, discard the test tube in
the broken glass bucket.
Notes: Ask students to also observe the color of the flame. The lavender color of the
flame indicates the presence of potassium ion. Ask students why it might be lavender (if
they have seen the flame test demo they might have a good idea why it is lavender and if
you make sure they know that you are using potassium chlorate).
Using the nutritional information on the package of candy, students could be asked to
calculate the number of calories or joules in one Gummi Bear. Then do the demo.
1 calorie = 4.184 Joules; remember that calories on the nutritional information are really
kilocalories.
19-5