Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
39 views

12level Sensor Mpklldfvfregreererwee rww343qr4 Sdfgrewretwerfserwetwrt43top4ipiprq Ewire0w0eowf0e JHOIIP90I90-9

This document discusses different types of level sensors used to measure the level of fluids in tanks. It describes float-operated, solid probe, ultrasonic, microwave radar, and hydrostatic level sensors. Hydrostatic pressure sensors measure the pressure caused by a liquid's weight and provide an electrical signal corresponding to the fluid level. They are widely used in industry due to their accuracy and durability over long periods of use, though the tank must be empty for maintenance. Ultrasonic sensors are also common as they require no contact with fluids and have fewer parts requiring maintenance.

Uploaded by

Maiud Abdalate Otman
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
39 views

12level Sensor Mpklldfvfregreererwee rww343qr4 Sdfgrewretwerfserwetwrt43top4ipiprq Ewire0w0eowf0e JHOIIP90I90-9

This document discusses different types of level sensors used to measure the level of fluids in tanks. It describes float-operated, solid probe, ultrasonic, microwave radar, and hydrostatic level sensors. Hydrostatic pressure sensors measure the pressure caused by a liquid's weight and provide an electrical signal corresponding to the fluid level. They are widely used in industry due to their accuracy and durability over long periods of use, though the tank must be empty for maintenance. Ultrasonic sensors are also common as they require no contact with fluids and have fewer parts requiring maintenance.

Uploaded by

Maiud Abdalate Otman
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 15

12Level sensor

Mpklldfvfregreererwee rww343qr4
sdfgrewretwerfserwetwrt43top4ipiprq
ewire0w0eowf0e
JHOIIP90I90-9
Contents
- Introduction.
-Types of level measurements.
- Types of level Sensor .
- Conclusion .
- References.

Introduction
The process tanks are widely used for many purposes such as
mixing processes and Interim storage of working fluid, as well as
treatment and avoiding instability errors of flowing fluid.
so
The controlling of the tank level is an important function in these
applications.
Firstly that we need an equipment to represent the liquid level in the
control system These equipment are called sensor

In the language word sensor means device which is used to


record something that has changes with time ".
In industrial side sensor means a device used to convert physical
behavior or phenomena to electrical signal

level sensor
It is a sensor used to convert the level of fluid in tank or reservoir to
electrical signal (analogue signal or digital signal)

Types of level measurements.


i)- open tank measurement .
it is the level measurement when the tank without roof(open to
atmospheric).
Pm= Lm * S.G (inch water column )
Where Pm: maximum pressure. Lm :maximum head. S.G: liquid specific
gravity

ii)- close tank measurement.


it is the measurement when the tank has roof , in this cause there are
two pressures , one caused by weight of fluid and the other form the
gas between the fluid service and roof.
Pm=Pgas + Lm * S.G (in
w.c) Where
Pm: maximum pressure.

Lm :maximum head.

S.G: liquid specific

gravity Pgas: gas pressure

iii)-open tank with sealed fluid.


In this cause the level sensor is supplied with seal fluid that its level
is proportional to the level of the liquid .

Span=( P.seal - P.liq_min) - (P.seal - P.liq_max )

P.liq = Lm * S.G(liquid)
P.seal = Lm * S.G(seal)
Where
Lm: max liquid level. L.seal : max seal level.

P.liq_max: max pressure of liquid .

P.seal: max pressure of seal.

Types of Level sensor


- Float operated type.
- Solid probe type.
- Ultrasonic type.
- Microwave radar type.
- Hydrostatic type.

- Float operated level sensor type:There are two types of float level sensor
1)- float switch level sensor ( digital work principle low or full )
This kind is used for alarming
applications which gives two
signals, signal that indicates low
level ( switch is off ) when level is
falling and signal indicates high
level ( switch is on )when level is
rising by
assuming that the switch is
normally open

2)- continues float level sensor (analogue work principle )


This type measure the level to determine the exact amount of
substance in a continuous manner
which gives the level of fluid in every state by converting the
displacement of floating part to equivalent electrical signal .
This type consist of floating part attached to
metal rod and there is variable resistor
which its knob is mounted on this rod .
As the floating part displaced the position
of the resistor knob will change which in
turn change the resistor value.
This change is sensed by proper circuit
such as whetstone bridge and then
translated to electrical signal .
R= K*L
Where :
R - resistance.
L- length of displacement.
K - calibration constant.
Advantages :Has simple construction which easy to maintain
Long life stand
Disadvantages :The sensor must be has length of a tank (the sensor and the tank are the same in
length ), so its used in small tanks.

- Solid probe level sensor type(capacitive


type):
The principle of capacitive level measurement is based on change
of capacitance.
An insulated electrode acts as one plate of capacitor and the
tank wall (or reference electrode in a non-metallic vessel) acts as
the other plate the capacitance depends on the fluid level so the
empty tank has a lower capacitance while a filled tank has a higher
capacitance.
A simple capacitor consists of two electrode plate separated by
a small thickness of an insulator such as solid, liquid, gas, or
vacuum. This insulator is also called as dielectric.
Value of capacitance depends on dielectric which is used, also
depends on the area of the plate and distance between the plates.
When electrical signal is applied between the conductive probe
and the vessel wall.
The signal caused very low current flow through the dielectric
(process material in the tank )
When the level in the tank drops, the dielectric constant drops
causing a drop in the capacitance reading and then drops in
current flow.
the capacitance is (from the probe to the vessel wall)
This change of level is detected by internal circuit and translated into
electrical signal .
C=K*A* D

Where :
C- capacitance .
A-area of plat and the
wall of tank.

-permittivity
of air
K-dielectric
constant A-area
of plats
Advantages :-Has high accuracy range.
-Can be used in fluids of high
viscosity. Disadvantages :-difficult to maintains
-expensive
-the fluid must be in steady sate.

- Ultrasonic level sensor type:


ultrasonic level sensors consists of a transmitted ,receiver ,gate control
unit, clock pulse generator, counter down, timing and control unit.
To measure the level with an ultrasonic sensor the module should be
mounted above the tank.
When the ultrasonic signal is
transmitted ,the module outputs
a pulse.
When the echo is received
another pulse is generated
using an external counter you
can measure the time between
two pulses and then the
distance of the liquid through
this equation.

D= 0.5*V * t
Where;
D=distance of the level
V=velocity of sound 331.5 m/s
t = total time ( go and back )
Advantages :-Ultrasonic level sensors do not make any contact with the process fluid
under level detection.
- They consist of fixed components only hence require less maintenance
-They are usually mounted at the top of the vessel due to which they are less
likely to offer leakage problems as compared to entirely (wetted) kind.

Disadvantages :-Ultra sonic sensors can not be used with materials like powders and Foam.
-Also can not be used in cause of heavy vapors and unstable liquid Surfaces
-The roof must be covered by insulated material to avoid the echo signal form
repeating itself many times .

- Microwave radar level sensor type:


Radar level measurement is based on the principle of measuring
the time required for the microwave pulse and its reflected echo to
make a complete return trip between the non-contacting sensor
and the sensed material level.
Then internal circuit converts this plus signal to electrical analogue
signal which will indicates the level of fluid .
Radar level transmitters range between 5.8 GHz and 26 GHz

D=c*N/2*f

Where
C=3 10^8 (light speed) , N=number of repeats

=the difference between two frequencies

Advantages of this type is the same as ultra sonic type


Disadvantages
-Expensive
-Not accurate if the liquid is not steady state .

Hydrostatic level sensor type:

For many years hydrostatic pressure


measurement has been the most
important measuring principle in
continuous level measurement.
What is meant by hydrostatics?
Hydrostatic is the weight (force) of
fluid acting downwards with earth
gravity on specific area
Where it means pressure
This pressure is direct proportional to the
acting force (weight of fluid )and indirect
with the area of the tank

P=F/A

Which can be written as


P= .g.h (open tank)
Where :
- liquid density
h-height of liquid
g-gravity

So as the height increase the hydrostatic pressure increase


In case of closed tank the hydrostatic pressure is
P2= .g.h -P1
p2 = hydrostatic pressure .
p1= pressure of the enclosed gas in the tank .
= density of the fluid .
g = gravity ( earth acceleration )
. h = height of the liquid column.

Types of hydrostatic pressure level sensors

the hydrostatic pressure sensor in to main types


-external hydrostatic pressure sensor.
-internal hydrostatic pressure sensor.

Classification by structure :

1)- ON/OFF level sensor type :


in this type we can obtain a simple digital signal with two
level conditions as maximum level or minimum level for
opening and closing valve or for alarming indication.
Sensor response to the pressure variation by the linear mechanical
spring

The mathematical expression of spring

F=K x
Where
F - The applied force on the piston
X- the displacement of piston

K- spring constant

2)- Modulating hydrostatic pressure level sensor


in this type we can obtain an analog signal expresses
Instantaneous value of tank liquid level using variable
impedance of the sensitive
member which responses
the hydrostatic pressure by
variation of flexible
resisting diaphragm .

construction :
a)- diaphragm
b)-pressure sensor
(strain gauge and Wheatstone
bridge ). c)-amplifier
d)-V to I
converter e)the body ( cover
)

Conclusion :
Level sensor : It is a sensor used to convert the level of fluid in tank or reservoir to
electrical signal
There are many types of level sensors which its ideal of operation depending on different
principles but the most common and the best types are:
Ultrasonic because it is modern and accurate
Hydrostatic level sensor type because it can be used in many applications and
because is has long using life .
Level sensors give us the ability to know how much the fluid level in the tank to let the
storage processing under control.
By using level sensor(on /off type) we can close or open fluid flow line or pump in such
way as closed loop system .
Hydrostatic pressure type level sensor. Advantages
-widely using in industrial side
-relatively accurate
-long life stand
-easy to calibrate Disadvantages
-the tank must be empty for maintenance or replacing the sensor
-casing leakage errors

References :1)-Wikipedia website .


2)-process control instrumentation technology ( book).

You might also like