Hammelmann 2016

www.hammelmann.
us
Industrial high pressure application systems

Over 60 years of innovative technology
Surface preparation
Pipe cleaning
Valves, water hydraulics and accessories
Tank cleaning
Water jet cutting
Hammelmann
Table of contents
General
Table of contents
General
Pipe cleaning
2
3
Surface preparation
High pressure water blasting guns
67
Ergoblast, handrail cleaner
8
Radio remote control, swivelling connections
9
Jetmate 10
Jetboy 11
Aquablast 12 13
Aquablast PLUS
14 15
Aquablast Drive
16
Aquadozer 17
Rotor jets
18 20
Rotary joints
21
Process integrated application systems
22 23
Spiderjet 3000 24
Dockboy 25
Dockmate 26 27
Tank cleaning
Aquamat tank cleaning heads
30 31
Aquamat Select for large vessels
32
Nozzle holder arms for tank cleaning heads 33
Aquarex tank cleaning devices 34 37

Turbo jets
Flexible and rigid lances
Push and pull nozzles
Rotor jets for pipe cleaning
Centralizer for rotor jets
Guide skids for rotor jets
Nozzle holders for pipe cleaning
3D pipe cleaners
Revolving hose reel
Pipemaster hose rotating system
Safety device for heat exchanger cleaning
Foot switch and foot valve
40 41
42
43
44 45
46
47
48 49
49
50
51
52
53
Water jet cutting

Cutting systems
55
Cutting systems, cutting nozzles, accessories 56

Systems for pressure and impulse testing
Metal forming
Valves
High pressure hoses
Nozzle inserts
Personal Protective equipment
58
59
60 62
63
64
65
Rental
Water jetting technology for rent
Rental units
Overview of high pressure pumps and units
66
67
68
Energy-saving
Tools with optimised flow characteristics reduce energy consumption and make full use
of flow and pressure. Result: the total energy
consumption is reduced.
Reliable
Hammelmann cleaning systems are reliable
modules for integration into production processes and machinery. Famous companies
benefit from our technology.
Optimised
The number, arrangement and angle of
nozzles on surface blasting and nozzle holder
systems are worked out using the latest simulation programmes. This ensures a highly
effective use of energy.
Safe
User-friendly water blasting tools increase
safety when working and allow the operator
to work for longer periods of time and with
greater concentration.
Flexible
Hammelmann application systems can be
adapted to individual cleaning requirements.
The RD Flex rotor jet for example can be
adjusted to work at different rotation speeds
without the need for tools.
Precise
Precision tools are required for cleaning and
deburring very small bores and intercepting
bores. Automobile manufacturers worldwide
use Hammelmann's high pressure technology.
Environmentally friendly
Cleaning systems with direct vacuuming of
removed waste material and water plus filtering have long been Hammelmann's hallmark
for "green competence".
Innovative
Turning new ideas into practical water blasting tools is what our applications engineers
do every day, whether on the customers site
or in our flexible and efficient technology
centre.
Economical
Take Hammelmann's ship cleaning systems
for example. These can be used following just
a very short set-up time and quickly remove
coatings from metal surfaces.
MORE DETAILS: HAMMELMANN.US/CATALOGUE
SURFACE PREPARATION
Surface preparation
High pressure water blasting guns
67
Ergoblast, handrail cleaner
8
Radio remote control, swivelling connections
9
Jetmate 10
Jetboy 11
Aquablast 12 13
Aquablast PLUS
14 15
Aquablast Drive
16
Aquadozer 17
Rotor jets
18 20
Rotary joints
21
22 23
Spiderjet 3000 24
Dockboy 25
Dockmate 26 27
High pressure water blasting guns up to 43,500 psi
Shoulder stock - can be adjusted to individual requirements
Continuous flow channel (backwards)
Ergonomics
An ergonomically formed handle and various extensions can be easily
combined. Each operator can find the working posture that best suits
him, saving him effort and increasing workplace health and safety.
SURFACE PREPARATION
U-shaped brace - compact
Hose connection (downwards)
A small lever but with a great effect

A simple lever mechanism makes the trigger of our new blasting guns
childs play to operate. The operator can use the gun without feeling
strain and physical stress which enables longer, more concentrated
working periods.
Mechanical / Electric
Blasting gun
Technology
Operating pressure
Weight
SP 400 M
up to 6,000 psi
7.1 lbs
SP 1000 M
up to 14,500 psi
8.0 lbs
up to 14,500 psi
10,1 lbs
up to 43,500 psi
7.7 lbs
up to 43,500 psi
11.0 lbs
up to 43,500 psi
8.2 lbs
up to 43,500 psi
9.3 lbs
up to 43,500 psi
14,3 lbs
up to 43,500 psi
10,1 lbs
Mechanical dry shut off
SP 1000 ME
Mechanical dry shut off /
Electric
SP 3000 E
Electric
SP 3000 E H
Electric
with continuous
flow channel

Bypass
SP 3000 MB
Mechanical bypass
SP 3000 MBE
Mechanical bypass /
Electric
For two-hand operation
SP 3000 MB 2H
Mechanical bypass for
two-hand operation
SP 3000 E 2H
Electric for
two-hand operation
SURFACE PREPARATION
Ergoblast
SP 3000 Ergoblast
The gun's lance (from inlet to nozzle) has no sharp bends or
restrictions. This design reduces pressure loss and eliminates
turbulence.
The smooth flow results in a more efficient water jet emitting from
the nozzle.
The operator no longer has to fight the trigger pressure.
Integrated body support for reaction forces of more than 33.7 lbf
The transponder actuated switching surface extends over the
whole length and circumference of the front hand grip.
Many different working postures are possible.
Economical operation - high reliability

The ergonomic design puts much less physical strain on the operator which means less fatigue so there is increased utilisation.
Robust design and no moving parts means no maintenance costs.
Versatile modular construction enables many applications.
Robust, fully encapsulated electronics.
No moving parts.
Contactless switching thanks to robust hand-worn encapsulated
transponder, eliminating mechanical wear.
No seals or housing openings.
Manufactured from wear-resistant, long-life materials.
Handrail cleaner
The "Handrail cleaner" has been especially developed for cleaning,
rust removal and paint stripping operations on hand rails and pipes
up to 50 mm in diameter.
Manual cleaning unit guided along the pipe.
Housing made of aluminium and synthetic materials.
Parts subjected to high pressure are made of high-strength
corrosion-resistant stainless steel.
A series of roller guides provide consistent standoff distance
6 fan jets for optimal all-round cleaning.
Special design for minimal weight.
SURFACE PREPARATION
Technical data
Suitable for pipes with outside diameters from 1 2 inch
6 nozzle inserts Type "R"
Fan jets 20, 30 or 45 can be used
Op. pressure:
Flow rate:
Weight:
Height:
Width:
Length:
up to 43,500 psi
up to 8 gpm
14.3 lbs
9.5 inch
15.0 inch incl. handgrip
22.0 inch
Radio remote control - RRC
RRC Basic
RRC Plus
Transmitter ON/OFF
High pressure OFF switch
High pressure ON/OFF
4 pole bypass socket with
1.5 m connecting cable
Status LEDs
Receiver with connecting cable
Battery charger
Belt
Same as basic plus :

Emergency stop switch
Rocker switch,
high pressure pump ON/OFF
Rocker switch, set value +/More RRC versions are available
Wireless connection between the high pressure pump unit and electrically actuated guns
and other blasting accessories
Swivelling connections
The swivel connector makes work with high pressure

blasting guns easier by eliminating high pressure hose
constraints. Light, compact design.
Swivelling connection for blasting guns

Swivelling connections are available up to an operating pressure of
43,500 psi. They are available for the blasting guns SP 400, 1000 and
3000. Weight: approx. 1.3 lbs.
Swivelling connection for high pressure hoses

Swivelling connection DN 14 is available for operating pressures of
up to 23,200 psi. M36 x 2 DKO threads serve as connections on both
sides.
SURFACE PREPARATION
Safe and ergonomic work with high pressure water

JETMATE
The reaction forces are absorbed by the holding device.

The Jetmate enables reaction force free working during the cleaning
process, is easy to handle and provides increased safety.
Blasting tool can be easily moved and swivelled in all directions

Weight relief by pneumatic cylinder compensation
Simple handling and increased safety at work, these are the demands
in the modern working environment. To meet these requirements it is
our policy to continuously develop our high pressure systems.
Suitable for standard gun barrels

Pneumatic deployment module to advance
and retract during blasting
Deployment module is available without holding device
Manual blasting gun work
10
SURFACE PREPARATION
Reaction force free working with Jetmate
JETBOY
Working with the JETBOY is virtually effortless, enabling the operator
to get much more done in less time.
Mechanical assistance for manual gun work with single or rotor jets
and Aquablast surface cleaner on:
Ceilings, supports (bridges, multi-storey car parks)
Floor surfaces (removal of expansion joints and markings)
Blasting of edges and corners with accuracy and ease
Working on ceilings and undersides
Reaction force free working with Jetboy device.

The reaction force is taken by the Jetboy.
Working on floors
1
2
Single/rotor jet
Aquablast surface cleaner
SURFACE PREPARATION
11
Aquablast surface cleaners
Description
Typical applications
Easy handling and high power performance

make the Aquablast surface cleaners more
than just cleaners. They can be used for a
wide range of applications.
Paint booth grid cleaning

Floor and paving cleaning
Stripping and removal of
paint and rust etc.
Cleaning fuel, oil and grease
deposits / stains
(Optional: wear protection for spray bar.)
12
SURFACE PREPARATION
Removal of coatings, mastics, laitance,

adhesion inhibitors, mortar rendering etc.
Roughening concrete and asphalt
Aquablast FR 1500
Aquablast FR 3000 HD
Aquablast FR 3000
Spray bar driven by reaction

force of the water jets.
Wear-resistant rotary joint
with labyrinth seal
Pressure on/off control options:
Mechanical bypass valve or electric in
4-pole system signal to pump. Special
controls available upon request.
On/Off control by twin trigger action
Four-wheel carriage
Optional: wear protection for spray bar

Height-adjustable spray bar
Pressure on/off control options:
Mechanical bypass valve or electric in
4-pole signal to pump. Special controls
available upon request.
The Aquablast's all-steel chassis means it
can be cleaned using high pressure water.

Height-adjustable spray bar
Spray bar housing with special seal
Electrical pressure on/off control in 4-pole
system. Special controls available upon
request.
Increased stability thanks to four wheel
carriage
Surface cleaner
Working width
Op. pressure
Flow rate
Rotation speed
Weight
FR 1000
20 inch
up to 14,500 psi
42 gpm
1500 r.p.m.
~ 260 lbs
FR 1500
16 inch
up to 21,800 psi
39 gpm
1000 r.p.m.
~ 200 lbs
FR 3000
9 inch
up to 43,500 psi
11 gpm
3000 r.p.m.
~ 170 lbs
FR 3000 HD
11 inch
up to 43,500 psi
11 gpm
3000 r.p.m.
~ 210 lbs
SURFACE PREPARATION
13
Aquablast PLUS surface cleaner
Description
The removed waste and waste water can

be directly vacuumed away to a combined
vacuum/filter unit where they are separated
for further disposal.
Removal of coatings, paint and rust from

metal surfaces, e.g. ship hulls, storage
tanks
Roughening concrete and asphalt

Removal of markings on roads, parking
and storage spaces in production halls
Cleaning storage spaces, flooring,

machine shops, faades
Aquablast FRV 3000
Aquablast (example: Twin)
Aquablast FRWV 3000
Working width:
9 inch
Operating pressure:
up to 43,500 psi
Flow rate:
up to 11 gpm
Rotation speed:
up to 2500 r.p.m.
Working width:
22 inch
Operating pressure:
up to 43,500 psi
Flow rate:
up to 15 gpm
Rotation speed:
up to 3000 r.p.m.
Working width:
6 inch
Operating pressure:
up to 43,500 psi
Flow rate:
up to 5 gpm
Rotation speed:
up to 2500 r.p.m.
Direct vacuuming allows the use of high pressure water blasting in factories and machine
shops without halting production or on roads,
upper storeys of buildings etc. without the
need for closure.
Ergonomic handheld cleaning and stripping

unit for vertical surfaces.
Vacuum system
For use with the Aquablast PLUS units. The
waste water and solids are separated within
the system for further disposal.
14
SURFACE PREPARATION
Capacity:
2 x 61 gal
Power required:
7.4 hp
Vacuum:
2.9 psi
Suction power:
7,062 ft/h
SURFACE PREPARATION
15
Aquablast Drive

Suctions off removed waste material and waste water

Spray bar driven by reaction force of the water jets
Optimised with 2 x 4 nozzle arms i.e. a total of up to 8 nozzles
Modular Aquablast system
Working width:
Op. pressure :

up to 40 inch
up to 14,500 psi
Flow rate:
Average working speed:
Total weight:
up to 63,4 gpm
164 ft/min
2,000 lbs
Applications
Cleaning large surfaces such as runways and industrial sites
Vacuum system
Vacuum system for suctioning off
and pre-filtering waste water.
Dual chamber system
16
SURFACE PREPARATION
Prefractionator:
Fine separator:
166 gal
430 gal
Weight:
Engine:
3,300 lbs
3-cylinder diesel engine
Suction power:
Vacuum:
22,954 ft/h
3.5 psi
Aquadozer
The Hammelmann Aquadozer is a remote-controlled carrier system for heavy-duty industrial

cleaning. The system is suitable for reaction forces resulting from power ratings of the HDP
380 to HDP 800 high pressure pumps.

Robust chassis
Tier 4 Final engine
Radio remote control
Working arm with universal connection for various water blasting tools
Hydraulic connection allowing water blasting tool to be quickly connected to the system
Lance system
Hydraulically powered rotor jet
Rotor jet, heavy-duty version,

driven by reaction force
Rotor jet, medium-duty version,

driven by reaction force
SURFACE PREPARATION
17
Rotor jets
Rotor jets

Rotor jets utilise the high efficiency of round
jets to blast more surface in less time. Thanks
to varying nozzle heads and controlled
rotation speed adjustment, there are a great
number of possibilities when it comes to
blasting surfaces. The light and compact
design enables the operator to reach areas
with limited access.
18
SURFACE PREPARATION
Surface preparation:
Cleaning
Roughening
Removing coatings
Concrete demolishing
RD Flex 3000
Nozzle heads
Rotor jets with adjustable rotation speed. The

rotation speed is adjusted by turning the dial.
RD Flex 3000 MONO
Standard version with 3 nozzles
Spot blasting
Profile cleaning
Universal head for 2, 4 or 6 nozzles
RD 400 / 1000 / 1600
RD 3000 PR (pneumatic)
For use with blasting guns series 400, 1000,

3000 and high pressure lances.
Pneumatically powered rotor jet for use with

blasting guns series 3000, high pressure
lances and the Ergoblast.
Rotor jets
Op. pressure
Single-jet rotor nozzle with adjustable rotation speed. The working nozzle is arranged
in such a way as to keep vibrations to a
minimum. No tools needed to set the rotation
speed
Nozzle holders
Flow rate
Rotation speed
Connection thread
Weight
RD Flex 3000
up to 43,500 psi
2.2 8 gpm
1000 4000 r.p.m.
M 14 x 1,5 LH"
Adapter 9/16 "-18 UNF
4.0 lbs
RD Flex 3000 MONO
up to 43,500 psi
2.2 8 gpm
1000 4000 r.p.m.
M 14 x 1,5 LH"
4.4 lbs
RD 400
up to 5,800 psi
up to 21 gpm
1000 2000 r.p.m.
G 3/8 "
2.6 lbs
RD 1000
up to 14,500 psi
up to 16 gpm
1000 2000 r.p.m.
G 3/8 "
2.6 lbs
RD 1600
up to 23,200 psi
up to 13 gpm
800 2000 r.p.m.
MH 14 x 1,5 LH
3.5 lbs
RD 3000 PR
up to 43,500 psi
up to 8 gpm
100 3000 r.p.m.
MH 14 x 1,5 LH
5.7 lbs
SURFACE PREPARATION
19
Rotor jets
Mechanically deployed rotor jets handle high pump power inputs and
are generally built into cleaning machines or systems. The rotation is
effected by the reaction force of the water jets. Can be configured with
axial or radial jetting heads.
20
Rotor jets
Operating pressure
Flow rate
Rotation speed
Weight
RDM 200
up to 14,500 psi
up to 42 gpm
100 1500 r.p.m.
17.6 lbs
RDM 250
up to 21,800 psi
up to 32 gpm
100 1500 r.p.m.
17.6 lbs
RDM 300
up to 14,500 psi
up to 48 gpm
50 250 r.p.m.
18.1 lbs
RDM 400
up to 20,300 psi
up to 53 gpm
50 250 r.p.m.
62 lbs
RDM 400 R
up to 36,300 psi
up to 26 gpm
50 500 r.p.m.
93 lbs
RDM 750
up to 23,200 psi
up to 106 gpm
100 1000 r.p.m.
160 lbs
SURFACE PREPARATION
Powered rotary joints

Powered rotor jets are a combination of motor and water blasting tool. The motors are electric,
pneumatic or hydraulic and are available in various power ratings. Here are a few examples:
Hydraulically powered rotary joints

Versions with the following parameters:
Pneumatically powered rotary joints

Electrically powered rotary joints

Op. pressure:
Rotation speed:
Flow rate:
Op. pressure:
Rotation speed:
Flow rate:
Op. pressure:
Rotation speed:
Flow rate:
up to 43,500 psi
up to 3000 r.p.m.
up to 66 gpm
up to 43,500 psi
up to 3000 r.p.m.
up to 11 gpm
up to 43,500 psi
up to 2850 r.p.m.
up to 26 gpm
Possible combinations of powered rotary joints and nozzles holders
Rotor jet with spray bar and wear protection,

hydraulically powered
(Working width: 15.7 inch)
Centrally powered nozzle bar system,

3 rotary joints (working width: 59.7 inch)
Modular combinations of powered rotary joints and nozzle holders are possible.
There are further nozzle holder versions available.
The number of nozzles and their arrangement

on surface cleaning systems are optimised
using the latest simulation programs.
SURFACE PREPARATION
21

Deburring and washing engine
and gearbox components
Removal of coatings, paint etc.
Robot-assisted high pressure

applications such as car body
skid cleaning and decoring
Roughening of metallic surfaces
Internal blasting and decoring of castings
Rotor jet, electrically powered
Nozzle lance, electrically powered
Multiple rotor jets, electrically powered
Internal blasting system,

electrically powered
Electrically driven angled rotary joints
Electrically driven multiple rotary joints

(oscillating)
Spray bars
Electrically powered multiple rotary joints

for external drive
Nozzle arm, hydraulically powered
22
SURFACE PREPARATION
SURFACE PREPARATION
23
Spiderjet 3000
The Spiderjet 3000 is held on the work surface by a vacuum, which at the same time suctions off the removed waste material and waste water.
Ship cleaning
External cleaning of large vessels
Technical data
Cleaning plus coating and paint removal of:

Storage tanks
Outer surfaces of ships
Concrete
Cargo holds
Working width: 14.7 inch

Op. pressure: up to 43,500 psi
Flow rate:
up to 13 gpm
Concrete preparation
Vacuum:
Approx. 7.3 psi depending on the surface

Suction connection: DN 100
Pneumatic control cabinet

(optional: with radio remote control)
24
SURFACE PREPARATION
Dockboy
The Dockboy is a semi automatic vehicle primarily for working on ship hull bottoms or similar surfaces.
In combination with direct vacuuming, it

ensures eco-friendly rust removal and old
coating removal with waste and waste water
collection. An Aquablast surface cleaner is
attached to the end of the jib. The rotor is
hydraulically powered.
The jib is designed to allow multifunctional
work to be carried out on flat or rounded
surfaces as well as on ground and overhead
surfaces.
Working width: 14.6 inch (optional 19.9 inch)
Op. pressure: 43,500 psi
Working height: 0 19 ft
Vehicle height: 4 ft
Arc width:
13 ft
19 ft
0 ft
SURFACE PREPARATION
25
Dockmate
The Dockmate is a completely dust-free,
eco-friendly alternative to dry open abrasive
blasting capable of preparing hull surfaces to
the most exacting standards applicable today.
105 ft (optional)
Using pressures varying between 36,300 psi

and 43,500 psi, up to 2690 ft per hour of
surface can be prepared to NACE/SSPC
standards WJ1/SC-2.
72 ft (optional)
88 ft (optional)
The ultra high pressure unit

is attached separately
Telescopic jib: heights of 72 ft,
88 ft and 105 ft (optional)
Different Aquablast versions

Working widths of 14.7 inch 33.9 inch
43,500 psi possible with output of 7.4 24.3 gpm.
Spot blasting
Quick approach of damaged spots without
unloading the pump pressure.
Training software
All work steps and functions can be learned
using a simulation software combined with a
modified Dockmate remote control.
Errors made when using this remote control
are displayed and suggestions given as to
their rectification.
No matter where the operator is, he can teach
himself the individual functions and procedures using this software.
26
SURFACE PREPARATION
Working width
14.7 inch (optional)
Working width
Working width
Aquajet 17
7.4 gpm 43,500 psi
2 x Aquajet 17
14.8 gpm 43,500 psi
3 x Aquajet 17
22.2 gpm 43,500 psi
Aquajet 25
12.1 gpm 43,500 psi
Aquajet 25
12.1 gpm 43,500 psi
2 x Aquajet 25
24.3 gpm 43,500 psi
Filter / recovery module
Portable remote control
Applications
The waste water and the removed solids are

separated in the filter recovery module and
the solids are collected in a "big bag".
The Dockmate is operated by

portable radio remote control.
Blasting of metal surfaces, e.g. outer surfaces

of ships and storage tanks. Cleaning of storage spaces, runways, flooring, roughening of
concrete and asphalt.
SURFACE PREPARATION
27
TANK CLEANING
Tank cleaning
Aquamat tank cleaning heads
30 31
Aquamat Select for large vessels
32
Nozzle holder arms for tank cleaning heads 33
Aquarex tank cleaning devices 34 37
Aquamat tank cleaning units
Description
Design features
Hammelmann automatic tank cleaners remove deposits including hardened materials

from tank internal walls at pressures of up to
26,100 psi.
Internal cleaning of autoclaves, vessels,

Euro containers, reactors, agitator vessels,
holding tanks, drying towers etc.
Minimum pressure losses result

in high efficiency.
Coherent water jets for max. cutting
performance and distance.
Wear-resistant, stepless adjustable
braking system. The adjusting mechanism
is dirt-protected.
Compact and corrosion-resistant housing
High reliability due to simple and
low-maintenance design.
Freely suspended operation possible
Decontamination
The units operate solely with the power
of high pressure water. The wide range of
Hammelmann nozzle holder arms achieve the
cleaning standard required at the specified
performance parameters. Units can be fitted
with one or two arms.
Disinfection (with chemical additives)

Cleaning the interior of large diameter
pipework with deployment sledge
Simulation of tank cleaning

Homogenous and thorough cleaning is ensured by an optimal interaction of rotational movements combined with an adjustable speed.
Before
30
TANK CLEANING
After
The cleaning action covers a wide area

thanks to the rotating motion of the axes
1 + 2 .
Hot water
(185 F)
Pressure-resistant
Chemical industry design
Chemical industry design, gastight
Tank cleaning units
Operating pressure
Flow rate
Min. tank access
Weight
L 1400-2
up to 20,300 psi
up to 50 gpm
5.5 inch
17.2 lbs
L 1800-2
up to 26,100 psi
up to 40 gpm
7.5 inch
22.7 lbs
XL 500-2
up to 7,300 psi
up to 105 gpm
6.7 inch
32.6 lbs
XI 1600-2
up to 23,200 psi
up to 70 gpm
7.5 inch
32.6 lbs
XL 1600-2
up to 23,200 psi
up to 70 gpm
7.5 inch
32.6 lbs
XL 1600-2
gastight
up to 23,200 psi
up to 70 gpm
8.1 inch
85 lbs
XXL 1600-2
up to 23,200 psi
up to 220 gpm
11.8 inch
205 lbs
TANK CLEANING
31
Aquamat Select cleaning system for very large vessels
1b
ENERGY
EFFICIENT
The cleaning time is reduced by an oscillating movement of the nozzle

arm. The oscillation angle of the surface of the length (A) can be limited to 35 or 83 . The rotation around the vertical axis of the apparatus for the surface length (B) is preselected at 36 or 81 . When used
in large containers (Fig. 1) the tank cleaning head is positioned at the
vessel wall and cleans section by section.
1a
1a Long blasting arm,

oscillating motion
Drive arm, powered by the

jet reaction force
1b Short blasting arm,

oscillating motion
Fig. 2
Fig. 1
Fig. 1 - Very large diameter vessel
Fig. 2 - Large cylindrical vessel
Variants to enable different cleaning positions (vessel top, bottom) are possible.
In smaller diameter large cylindrical vessels

(Fig. 2), the tank cleaning head is positioned
centrally. The limits on the rotational motion
around the vertical axis of the apparatus (B)
are removed to enable the full 360.
The drive of the Aquamat Select is provided by a second, reaction force powered nozzle arm.
For the rotation mode, a wide range of nozzle inserts are used. This allows optimized cleaning
time and efficiency.
32
TANK CLEANING
Nozzle holder arms for tank cleaning heads

Hammelmann can supply nozzle holder arms in various designs, lever
actions and arm lengths to achieve the cleaning standard required at
the specified performance parameters.
Particularly compact designs make cleaning through small openings

possible.
Nozzle holder Type "L" arm for

TCH "XL"
Nozzle holder Type "V arm for

TCH "L"
Nozzle holder Type "V" arm for

TCH "XL"
Nozzle holder Type "S" arm for

TCH "L"
Nozzle holder Type "S" arm for

TCH "XL"
Special version for smokestack

cleaning
Extension arm from

4.33 inch to 43.3 inch
Protective cage
Manufactured from rust and
acid resistant stainless steel with
rubber-coated frame sections.
Offers all-round protection when
fitted with type "Z" or "S" nozzle
holder arms in conjunction with
an impact-resistant cover for the
arm.
Sledge type guides

Guides to enable tank cleaning
units to be used for pipe cleaning.
The unit is mounted in the centre
and a swivelling pulling eye is
provided. Optional "kick plate"
available so that the assembly
self-propels through the pipe.
Accessories for tank cleaning heads
Deployment pipes
To stabilise the tank cleaning
unit. Recommended for use when
the unit is freely suspended by
the hose with the unit brake adjusted to maximum (14,500 psi).
Protective covers
Impact-resistant plastic covers
for tank cleaning units and nozzle
holder arms.
TANK CLEANING
33
Aquarex tank cleaning devices

Hammelmann custom-build special devices for cleaning
the insides of various different tank and vessel designs.
Here are a few examples:
Lance system
With integrated ball valve for permanent
installation. The automatic tank cleaning unit
remains in the vessel during production.
34
TANK CLEANING
Lance system
Manually extendable, tilting lances. The nozzle standoff distance is adjusted by a crank
drive and chain.
Telescopic lance system

The lance is attached onto a manhole. It can
be manually rotated, swivelled, retracted and
extended. It is pulled out by its own weight.
Lance hose system

The lance is rotatable, swivellable and extendable and is attached onto a manhole.
The tank cleaning device is lifted and lowered
using a handle.
Lance hose system

The lance is positioned on the manhole by the
mobile chassis. The lance can be manually
rotated, swivelled, retracted and extended.
Twin lance system

The entire cleaning device is powered by high
pressure water and oil-free compressed air.
(With chain drive as an alternative for a stroke
of 14.7 ft or more.)
Gastight lance system

Four-stage telescopic lance driven by high
pressure water. The cleaning device is controlled and monitored by a freely programmable PLC.
Hose reel system with

weatherproof cabinet
The cleaning positions are freely programmable and controlled by the process plant
controller.
Hose reel system in standing

or suspended design
The cleaning positions are freely programmable and controlled by the process plant
controller.
TANK CLEANING
35
Aquarex tank cleaning devices
Hose reel system with jib

Electrically driven hose reels. The jib is
manually positioned above the opening and
lowered onto the cleaning port by handheld
control. The cleaning positions are freely
programmable and controlled by the process
plant controller.
Hose reel system with cantilever

Electrically driven hose reel. Can be manually
rotated and swivelled at the flange. Available
with various cantilever designs.
Swivellable telescopic cylinder

The four-stage telescopic cylinder can be
turned up to 180 degrees, swivelled 90 max.
and can be extended up to 13.1 ft.
Cleaning system for very large vessels

The system is designed for cleaning vessels up to 65.6 ft in diameter. It is lowered into the
vessel and fixed in position by three extendable support arms. The workarms with hydraulically driven rotor nozzles turn in a horizontal plane by means of a turntable, extend or retract
hydraulically and swivel vertically powered by hydraulic cylinders.
36
TANK CLEANING
Gastight hose reel system

The control of the operation of the system is
by PLC with a frequency converter for the reel
electric motor.
Gastight hose reel system
Hose reel system
Lance system - moved hydraulically/pneumatically actuated
Lance system - moved pneumatically actuated
TANK CLEANING
37
PIPE CLEANING
Pipe cleaning
Turbo jets
Flexible and rigid lances
40 41
42
43
44 45
46
47
Nozzle holders for pipe cleaning

3D pipe cleaners
Revolving hose reel
Foot switch and foot valve
48 49
49
50
51
52
53
Turbo jets
Turbo jets have a high speed rotating nozzle body which prevents striping inside the pipe.
The rotation of up to 20,000 r.p.m. is effected by the reaction force of the water jets.
Radialjet
Driver
Allrounder
Radialjet
Allrounder
Driver
Radialjets have 90 bores to clean and polish

pipes.
Allrounder have, in addition to the efficiency

of the Radialjet front facing bores.
The driver is installed as an adapter between

the high pressure lance or hose and the Radialjet/Allrounder. The driver has 3 angled rear
facing bores and moves the nozzle into the
pipe using the reaction force of the water jets.
To remove scale from partially blocked

pipes and heat exchanger tubes
To clean partially and fully blocked tubes

and heat exchanger
40
PIPE CLEANING
Up to 1500 bar free spinning
Tube diameter
(inch)
Turbo jet
Connection
thread
min.
max.
0.47 inch
M7
0.59
1.18
2 x 0.9* radial
approx. 8 gpm
0.55 inch
G 1/8"
0.67
1.38
2 x 1.0* radial
approx. 10 gpm
0.71 inch
G 1/4"
0.79
1.57
2 x 1.1* radial
approx. 12 gpm
0.87 inch
G 1/4"
0.98
1.97
2 x 1.0* radial
approx. 13 gpm
1.10 inch
G 1/4"
1.30
2.36
2 x 1.1 *radial
approx. 16 gpm
Turbo jet
Connection
thread
Nozzles
(mm*)
Max. flow rate gpm at

21,800 psi (incl. leakage)
Tube diameter
(inch)
min.
max.
0.71 inch
G 1/4"
0.79
1.57
0.87 inch
G 1/4"
0.98
1.97
Up to 2500 bar free spinning
Nozzles
(mm*)
2 x 0.6 *axial
2 x 0.6* radial
2 x 0.6* axial
2 x 0.6* radial
Tube diameter
(inch)
Nozzles
(mm*)

approx. 11 gpm
approx. 11 gpm
Turbo jet
Connection
thread

min.
max.
0.59 inch
G 3/8" - 24 UNF LH
0.71
1.38
2 x 0.6* radial
approx. 7 gpm
0.63 inch
G 3/8" - 24 UNF LH
0.75
1.38
2 x 0.6* radial
approx. 7 gpm
0.71 inch
G 3/8" - 24 UNF LH
0.79
1.57
2 x 0.7* radial
approx. 9 gpm
0.79 inch
M 14 x 1,5 LH
0.91
1.77
2 x 0.7* radial
approx. 9 gpm
Up to 2800 bar magnetic brake

Tube diameter
(inch)
Turbo jet
Connection
thread
Nozzles
(mm*)

min.
max.
0.71 inch
M 14 x 1.5 LH
0.79
1.57
2 x 0.4* radial
approx. 6 gpm
0.71 inch
9/16" - 24 UNF LH
0.79
1.57
2 x 0.4* radial
approx. 6 gpm
Turbo jet
Connection
thread
Nozzles
(mm*)

Tube diameter
(inch)
min.
max.
0.71 inch
M 14 x 1.5 LH
0.79
1.57
0.71 inch
9/16" - 24 UNF LH
0.79
1.57
2 x 0.35* radial
2 x 0.30* axial
2 x 0.35* radial
2 x 0.30* axial
approx. 7 gpm
approx. 7 gpm
*
Driver
1" = 25,4 mm
0,04" = 1mm
Max. diameter
of drive nozzle
Qmax gpm
up to 14,500 psi
Connection thread
(internal / external)
Hose nominal i/d mm
0.51 inch
approx. 1.6 / 3.4 / 6 / 9.2
G 1/8"
DN 4
0.51 inch
approx. 2.4 / 3.4 / 6 / 9.2
G 1/8"
DN 6
0.71 inch
approx. 1.6 / 6 / 9.2 / 13.5
G 1/4"
DN 4
0.71 inch
approx. 3.4/6.1/9.2/11.4/13.5
G 1/4"
DN 6
M14 x 1.5 LH
DN5
up to 43,500 psi
0.75 inch
1.6 13.5
PIPE CLEANING
41
Flexible and rigid lances / Push and pull nozzles
Lances
Flexible lances
Rigid lances
For use with a blasting gun or foot valve
For use with a hose or foot valve
For use with a blasting gun or foot valve
Operating pressure: 14,500; 20,300 psi

Length: 19.7; 32.8; 49.2; 65.6 ft
Nominal i/d: 0.16; 0.24 inch
Operating pressure: up to 43,500 psi

Length: 19.7; 32.8; 49.2; 65.6 ft
Nominal i/d: 0.16; 0.20; 0.24 inch
Operating pressure: up to 43,500 psi

Length: 19.7; 32.8; 49.2; 65.6 ft
Nominal i/d:
0.10; 0.20; 0.31; 0.39; 0.51; 0.63 inch
OD: 0.25; 0.39; 0.55; 0.73 inch
High and ultra high pressure lances as gun

barrel extensions or for cleaning heat exchanger tubes.
42
PIPE CLEANING

2
1
3
Cleaning completely blocked

tube in axial direction.
90 radial jets for maximum

cleaning and cutting efficiency.
Flexible Lances
Minimum pipe inner diameter
Push jets remove material from

in front of the nozzle. When
using flexible lances only employ
in conjunction with pull jets.

Operating pressure
Internal thread
Pull jets remove any material behind the nozzle while pulling the
lance and nozzle into the pipe.
Rigid Lances
Operating pressure
External thread
0.47 inch
up to 17,400 psi
M8
up to 36,300 psi
M6 x 0.75
0.67 inch
up to 14,500 psi
M10 x 1
up to 43,500 psi
M10 LH
0.79 inch
up to 23,700 psi
M14 x 1.5 LH
up to 36,300 psi
M14 x 1.5 LH
1.02 inch
up to 43,500 psi
M14 x 1.5 LH
up to 43,500 psi
M14 x 1.5 LH
1.30 inch
up to 7,300 psi
M22 x 1.5 DKO-S
1.57 inch
up to 26,100 psi
M22 x 1.5 DKO-S
2.17 inch
up to 20,300 psi
M36 x 2 DKO-S
PIPE CLEANING
43
44
PIPE CLEANING
For use with mechanically

deployed cleaning devices
Wear-resistant rotary joint

with labyrinth seal
Coating and rust removal
Stainless steel housing
Axial and radial nozzle arrangement

for cleaning tubes
Pipe and smokestack cleaning
Built-in eddy current brake and cooling

jacket in dustproof enclosure
Cleaning of partially blocked pipes,

boilers and smokestacks
With protective cover as an option
Flow rate
Rotor jet
diameter
Length
max.
Op. pressure
min.
2.09 inch
7.32 inch
14,500 psi
8 gpm
2.28 inch
9.37 inch
23,200 psi
26 gpm
6.69 inch
23,200 psi
6.69 inch
Nozzles
Connection thread
16 gpm
4 x radial
G 3/8 internal
52 gpm
2 x radial
2 x push
2 x pull
M36 x 2 DKO external
7 gpm
14 gpm
36,300 psi
4 gpm
8 gpm
2 x radial
2 x push
2 x pull
M14 x 1.5 LH
internal
12.87 inch
14,500 psi
24 gpm
48 gpm
4 x radial
M36 x 2
11.93 inch
21,800 psi
16 gpm
32 gpm
M24 x 1.5 DKO external
9.72 inch
43,500 psi
8 gpm
16 gpm
2 x radial
2 x push
2 x pull
5.12 inch
16.46 inch
21,800 psi
26 gpm
52 gpm
4 x radial
M36 x 2
6.54 inch
25.0 inch
23,200 psi
52 gpm
104 gpm
2 x push
M36 x 2
max.
3.07 inch
3.54 inch
5.04 inch
M30 x 2 internal
PIPE CLEANING
45

The centralizer enables rotor jets to be deployed absolutely centrally
in a pipe. The scissor-like centralizer is suitable for pipes and sewers
between 15 55 inch in diameter.
It comprises the following main components:
Guide pipe with mounting for rotor jet and hose
Adjustment to different pipe diameters
3 scissor arms with moving joints and wheels
46
PIPE CLEANING
The complete centralizer is made from rust-resistant materials. Rotary

joint, spray pipes and extension blasting arms selected separately.
The skids can be adjusted to fit various diameters of pipe.

A swivelling pulling eye is fitted to the rotor jet
For pipe- : 5 110 inch
PIPE CLEANING
47
Nozzle holder for pipe cleaning

For use in conjunction with a hose rotating system to remove soft and hard deposits from pipes.
Radial nozzles
Axial nozzle
Push nozzles
Nozzle holder
We produce a wide variety of nozzle holders for use with the rotating
hose reel or hose rotating system (Pipemaster).
Partially and fully blocked pipes

Deposits on the inner wall
Hard materials
48
PIPE CLEANING
Pull nozzles
Nozzle holder
diameter
2.17 inch
2.56 inch
3.15 inch
3.54 inch
Operating pressure
up to 26,100 psi
Nozzles
Quantity
Adjustment
2 x pull
2 x radial
2 x push
1 x axial
2 x pull
2 x radial
1 x axial
up to 26,100 psi
up to 26,100 psi
up to 23,200 psi
Connection
thread
M 24 x 1.5 DKO-S
or
M 36 x 2 DKO-S
M 24 x 1.5 DKO-S
or
M 36 x 2 DKO-S
2 x pull
2x push
2x radial
1 x axial
2 x pull
2x push
2 x radial
1 x axial
M 24 x 1.5 DKO-S
or
M 36 x 2 DKO-S
19
6 x pull
6 x push
6 x radial
1 x axial
M 36 x 2 DKO-S
3D pipe cleaners
3D pipe cleaners are basically tank cleaning
units mounted in sledge type guides for pipe
cleaning. They are used for removing particularly hard scale deposits. Operating on two
axes with a "kick plate" they automatically
move through the pipe as the scale is blasted
loose. Alternatively where access is available
they can be pulled through the pipe.
Type
Nozzle arm
Operating pressure
Flow rate
Minimum pipe i/d:
Type L 1200-2
18 mm S arm, 2 nozzles
up to 20,300 psi
40 gpm
7.9 inch
Type XL 1500-2
up to 23,200 psi
66 gpm
12.6 inch
Typ XXL 1600-2
up to 23,200 psi
132 gpm
18.5 inch
PIPE CLEANING
49
Revolving hose reel
The unit cleans tubes with a diameter 70

mm. It is the ideal high pressure hose drive
and rotating system for use where limited
access prevents the use of a rigid lance
system.
The mobile unit comprises a hose reel with
powered deployment and retraction as well
as a rotational drive.
50
PIPE CLEANING
The flexible hose is rotated and pushed into

the tube by the powered hose reel.
All movements are electrically powered. The
unit is controlled from a portable remote
control panel.
A hydraulic version is optional.
Op. pressure:
23,200 psi

(optional 43,500 psi)
Hose
nominal i/d:
DN 5, DN 12, DN 20
Hose length:
328 ft
Rotation speed: 0 20 r.p.m.
adjustable
Drive speed:
0 25 r.p.m.
adjustable

The Pipemaster is a manually operated, high
pressure hose rotating system. It is used to
remove both soft and very hard deposits from
the insides of pipes and pipelines including
those with bends and vertical sections.
As an alternative to self-rotating nozzles, the

rotary action is achieved by rotating the high
pressure hose.
The low rotation speeds of the high pressure
hose is ideal to remove hard deposits. The
device is easy to operate.
Hose internal diameter 0.31 and 0.47 inch

Hose internal diameter 0.79 inch
3
4
1
2
Hose rotating unit
A high pressure supply hose line is fixed

between the pump and the rotary joint on
the hose rotating unit.
A second hose connected to the rotary
joint runs via the deployment unit into a
protective hose leading to the positioning
device at the workpiece. The rotation of
the second high pressure hose around its
longitudinal axis is effected by a chain drive from a pneumatic motor to the rotary
joint. The rotation speed can be smoothly
adjusted by throttle check valves.
The rotating unit is driven by 4,237 scf/h
of compressed air at 58 psi and comprises a pneumatic motor with a gearbox,
a pneumatic maintenance unit, the high
pressure rotary joint and a pneumatic
control system.
Hose deployment unit

Actuating the control lever of the unit
causes the hose to start rotating which
produces the forward and backward
movement.
The deployment speed is a maximum
of 5.2 ft/min. and it is smoothly adjustable by means of the control lever.
Moving direction
Changing the angle of the three wheels
that press onto the hose will cause
the hose to move forward (deploy) or
backward (retract). The hose deployment unit is mounted on a sturdy base
plate and comprises the height-adjustable control lever to deploy or retract
the hose as well as the remote control
to operate the hose rotating unit.
Positioning device
A non-rotating protective hose is
fitted between the hose deployment
unit and the positioning device. This
enables operation in pipes that are
difficult to access.
The positioning device enables easy
and secure insertion of the hose into
the pipe.
The blasting guard prevents a pressurised nozzle from being accidentally pulled out of the pipe.
The positioning device shown here is
for use with pipes up to 1.57 inch i/d.
PIPE CLEANING
51
Clamp
Telescopic arm with protective sleeve
The device is used to position the lance nozzle in the heat exchanger bundle tube and to
prevent accidental retraction.
When the operator retracts the lance a suitable sized stop within the protective sleeve
prevents jetting to atmosphere.
The device is clamped to the tube bundle

flange. Swivel joints and a telescopic arm
enable the lance within the protective sleeve
to be positioned at each individual tube of the
bundle.
For bundle diameters: up to 6.6 ft

For lance i/ds: DN 4, 6 und 8
Flange thickness: up 5.51 inch
BG test certificate
Catching device for pipe cleaning

Mainly for horizontal pipes.
For pipe- of 3.94 11.81 inch
52
PIPE CLEANING
X-Y deployment unit on heat exchanger for

rotating and swivelling hose reel
Description
For attaching to the heat exchanger flange,
complete with guide frame, manually
operated.
The controls and hydraulic supply are
provided by the hydraulic power pack and
the hose reel's portable control panel.
Foot switch and foot valve (as per PL "e" in accordance with safety standard EN 13849)
Varianten
Foot valve, mechanical check valve
Electrical foot switch for switching
the high pressure* on and off
Foot valve combined with
electrical foot switch*
*Connection:
4-pole plug with dust cap
Protection class: IP 67 in accordance with
DIN 40050
Switch mechanism with safety latch
Corrosion-resistant materials
Robust housing to ensure a non-slip operating position, and increase stability
Height:
Width:
Length:
Weight:
10.5 inch
10.1 inch
17.6 inch
24.3 lbs
Foot switch
Electrical foot switch to control the high
pressure.
Housing and protective hood in Gd-Al alloy
Connection: 4-pole plug with dust cap
Protection class: IP 67 in accordance
with DIN 40050
Extra-stable base for increased stability
Rubber feet
Height:
Width:
Length:
Weight:
5.7 inch
6.3 inch
9.4 inch
6.2 lbs
PIPE CLEANING
53
WATER JET CUTTING

Cold cutting
Cutting systems
Cutting systems, cutting nozzles, accessories
55
56
Cutting devices and nozzles

Materials that are difficult to cut require the use of a water jetting
nozzle with an abrasive entrainment chamber.
A high pressure water nozzle inside the assembly creates a water jet.
This pressurised water jet travels through the entrainment chamber
at high speed to a focusing nozzle dragging the air in the chamber
with it and creating a vacuum. Abrasive material is fed into the side
of the chamber under air pressure. The abrasive particles are sucked
into the air around the water jet and accelerated into the water stream to emit from the focusing nozzle.
Carrier trolley
Guide rail
Nozzle carrier mounted on a rail
The carrier trolley speed is manually

controlled by a pneumatic system. Cutting
speed and positioning speed are individually
controlled.
To make straight cuts the guide chain is attached to a 6.5 ft long guide rail.
The abrasive entrainment nozzle assembly

is mounted on a pneumatically driven carrier
trolley which runs on a tensioned guide chain
allowing a constant traverse speed to be
achieved.
WATER JET CUTTING
55
Versatile cutting device with remote control

Flexible and modular rail system

Linear and lateral flexibility
Attached by magnets (optional: vacuum)
Carriage electrically driven by 12V DC
battery. Optional: pneumatic drive
Flexible cutting head attachment system
Remote-controlled via tablet

For use with pipe diameters from
approx. 23 inch onwards
Standard length of rail approx.
47 inch, modularly extendable
Bluetooth connection to cutting system

Dead man's control on touch screen
Acceleration and position sensor
on carriage detects problems
Deployment speed infinitely adjustable,
deployment forward/back
Records cutting parameters and times
Nozzle inserts und accessories
Typ B 1500
Typ B 4000
Type S 4000 (with collimation tube)

Flow rate: 6.6 10.5 gpm
Designed to be mounted on a nozzle carrier.

Flow rate: 2.6 6.6 gpm
For attachment to carriage.

Flow rate: up to 2.6 gpm
Applications:
Concrete cutting & steelwork cutting
Applications:
Concrete cutting & steelwork cutting
Applications:
Especially for use with a cutting table, i.e.
cutting shapes in metals, glass, plastics,
ceramics etc.
Abrasive material: garnet sand and garnet in

a grain size of 0.04 0.08 inch.
Abrasive hopper with pneumatic controller for

the nozzle carrier
Focusing nozzles, guide piece, nozzle insert
56
WATER JET CUTTING
VALVES, WATER HYDRAULICS

AND ACCESSORIES
Metal forming
Valves
58
59
60 62
High pressure hoses

Nozzle inserts
Personal protective equipment
63
64
65
Ultramodern HP pump based systems with

fine-tuned valve and control technology enable pressure and impulse testing to be carried
out for a wide range of applications.
Hammelmann provides special solutions to

meet individual requirements. These testing
systems are rounded off by recordings of
measurements and their documentation.
Pressure and impulse testing for containers

and fittings
Impulse testing for common rail components
58
VALVES, WATER HYDRAULICS AND ACCESSORIES
Pressure tests up to 600 bar can be performed for large boilers and piping systems in
the power plant industry.
Metal forming
Precise and robust valves enable system providers to fit out their machines with advanced equipment in terms of metal forming. Hammelmann provides directional valves, overflow valves, pressure limitation
valves and safety valves as well as a variety of combinations allowing
for forming pressures of up to 43,500 psi.
Control block for high flow rates
Pressure regulating valve with servo control
Layout for metal forming systems
59
Valves
Hammelmann provides a wide range of high pressure valves, which stand out for their precision,
reliability and modern technology. Use of the latest materials ensures a high level of safety and durability.
Pressure regulating valves 26,100 psi
Pressure regulating valves 58,000 psi
P
B
P
A
3/2 way valve 43,500 psi
Bypass valve 58,000 psi
Pressure maintaining valves 26,100 psi

60
Pressure maintaining valves 58,000 psi
Safety valves 43,500 psi
Safety valves 26,100 psi
Z
P
2/2 way solenoid actuated valves 11,600 psi
High pressure filter 17,400 psi
Non-return valves up to 58,000 psi
Adjustable dissipator nozzle 26,100 psi

High pressure ball valve 26,100 psi
Adjustable dissipator nozzle 43,500 psi

61
Valves
Hammelmann combines high pressure valves for various system requirements. This leads to a high efficiency of the high pressure pumps used
together with high pressure systems. Key emphasis is placed on safety, functionality and high utilisation.
Control block with six 2/2 way solenoid actuated valves
Changeover valve for two blasting guns
Pressure-controlled switching valve
Switching control block for four high pressure intakes
62
High pressure hoses

Nominal i/d: 0.2 1.0 inch
Operating pressure: 2,200 46,400 psi
Hose length: 2 131 ft
Accessories for hoses
To enable us to offer the high standard of Hammelmann quality, we

assemble ultra high pressure hoses in our certified workshop.
Wide selection of high pressure hoses
Hose wheel
Hose arresters
Hose protectors
Hose wheels
Snap connectors
Swivel connectors
Hose fittings
Suction hose couplings
Hose bridges
Snap couplings
Precise compaction of hose fitting.
Every hose length required is cut and assembled to measure. By producing our hoses
in-house, we can offer very flexible delivery
times.
Assembly of the hose fitting.
The final pressure test is carried out in accordance with DIN EN 10204-23. The maximum
test pressure is currently 69,600 psi.
63
Nozzle inserts
TYPE: A ROUND JET

Efficiency factor: 0.95
Material: Steel
Nozzle: 0.4 4.9 mm *
TYPE: B FAN JET

Material: Steel
Nozzles: 0.8 3.0 mm *
TYPE: C ROUND JET

Material: Steel
TYPE: D FAN JET

Material: Steel
TYPE: E ROUND JET

Material: Steel
TYPE: G ROUND JET

Material: Steel
TYPE: H ROUND JET

Material: Steel/sapphire
TYPE: I ROUND JET

TYPE: K ROUND JET

TYPE: L ROUND JET

Material: Steel
TYPE: M ROUND JET

Material: Steel/ceramic
TYPE: N ROUND JET

TYPE: O ROUND JET

TYPE: P ROUND JET

TYPE: R FAN JET

Material: Steel
TYPE: S ROUND JET

Material: Steel
*
1" = 25,4 mm
0,04" = 1mm
TYPE: T ROUND JET

Efficiency factor: 0.72 - 0.92
Material: Steel/diamond
Nozzle : 0.15 1.00 mm *
64
TYPE: U ROUND JET

TYPE: W ROUND JET

Material: Steel
Personal protective equipment
Protective suit made of robust polyester

with polyurethane coating in accordance
with standard EN 343
Safety helmet
Safety boots
Hose protection, attached to the

connection to the lance/blasting gun
Protective clothing for water jets up to 43,500 psi operating pressure
Jacket with hand protection
Apron
Trousers
Hand and forearm protection
Gaiters
65
Water jetting technology for rent

3-D Tank cleaner
Aquablast surface cleaner
Waterblasting guns
Dual static hose reel
Abrasive cutting
3-D-Pipecleaner
66
WATER JETTING TECHNOLOGY FOR RENT
Rental units
Please have a look at our rental fleet.
Compact equipment
Packing free design
HDP 124
Power rating:
Op. pressure:
Flow rate:
up to 140 hp
up to 43.500 psi
up to 4,8 gpm
HDP 503
Power rating:
Op. pressure:
Flow rate:
up to 600 hp
up to 21,000 psi
up to 84 gpm
Most reliable
Pressure ranges up to 50,000 PSI
Applications:
HDP 173
Power rating:
Op. pressure:
Flow rate:
Surface preparation
Coating removal
Abrasive cutting
Tube cleaning
Applications:
HDP 803
Pipe cleaning
Vessel Cleaning
Power rating:
Op. pressure:
Flow rate:
Applications:
up to 255 hp
up to 20.000 psi
up to 40 gpm
Tube cleaning
Pipe cleaning
Surface preparation
Tank cleaning
Applications:
up to 1,000 hp
up to 23,000 psi
up to 165 gpm
Big Pipe cleaning

Large Vessel Cleaning
Multiple applications
simultaneously
RENTAL UNITS
67
HAMMELMANN DAYTON
436 Southpointe Drive
Miamisburg, OH 45342
USA
+1 937 859 8777

+1 937 859 9188
all-dayton@hammelmann.com
www.hammelmann.us
HAMMELMANN HOUSTON
402 HWY 146 South
La Porte, Texas 77571
USA
+1 281 842 9450
+1 713 373 1248
all-houston@hammelmann.com
www.hammelmann.us
HAMMELMANN LOUISIANA
Baton Rouge
37310 Commerce Lane
Prairieville, LA 70769
+1 225 384 5453
+1 443 845 0832
stephen.laviers@hammelmann.com
www.hammelmann.us
Hammelmann Corporation
436 Southpointe Drive
Miamisburg, OH 45342
www.hammelmann.us
mail@hammelmann.com
Phone: 937-859-8777
Member of
INTERPUMP GROUP
12/15 Copyright Hammelmann GmbH, Oelde, Germany. Subject to technical modifications.
US Companies

Hammelmann 2016

Uploaded by

Document Informationclick to expand document informationHammelmann

Document Informationclick to expand document information

Copyright:

Available Formats

Hammelmann 2016

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hammelmann 2016

Uploaded by

Copyright:

Available Formats

www.hammelmann.

Industrial high pressure application systems

Valves, water hydraulics and accessories

Water jet cutting

Water jet cutting

Valves, water hydraulics and accessories

MORE DETAILS: HAMMELMANN.US/CATALOGUE

High pressure water blasting guns up to 43,500 psi

Shoulder stock - can be adjusted to individual requirements

Continuous flow channel (backwards)

U-shaped brace - compact

Hose connection (downwards)

A small lever but with a great effect

Mechanical dry shut off

For two-hand operation

MORE DETAILS: HAMMELMANN.US/CATALOGUE

Economical operation - high reliability

Radio remote control - RRC

Same as basic plus :

The swivel connector makes work with high pressure

Swivelling connection for blasting guns

Swivelling connection for high pressure hoses

MORE DETAILS: HAMMELMANN.US/CATALOGUE

Safe and ergonomic work with high pressure water

The reaction forces are absorbed by the holding device.

Blasting tool can be easily moved and swivelled in all directions

Suitable for standard gun barrels

Manual blasting gun work

Reaction force free working with Jetmate

Working on ceilings and undersides

Manual blasting gun work

Reaction force free working with Jetboy device.

Manual blasting gun work

MORE DETAILS: HAMMELMANN.US/CATALOGUE

Aquablast surface cleaner

Aquablast surface cleaners

Easy handling and high power performance

Paint booth grid cleaning

(Optional: wear protection for spray bar.)

Removal of coatings, mastics, laitance,

Spray bar driven by reaction

Spray bar driven by reaction

Spray bar driven by reaction

MORE DETAILS: HAMMELMANN.US/CATALOGUE

Aquablast PLUS surface cleaner

The removed waste and waste water can

Removal of coatings, paint and rust from

Roughening concrete and asphalt

Cleaning storage spaces, flooring,

Aquablast FRV 3000

Aquablast (example: Twin)

Aquablast FRWV 3000

Ergonomic handheld cleaning and stripping

MORE DETAILS: HAMMELMANN.US/CATALOGUE

Suctions off removed waste material and waste water

The Hammelmann Aquadozer is a remote-controlled carrier system for heavy-duty industrial

Hydraulically powered rotor jet

MORE DETAILS: HAMMELMANN.US/CATALOGUE