Pipelinereg

TMCBV
Trunnion-Mounted Control Ball Valve

for Pipeline Regulation
Experience In Motion
Introduction
The TMCBV is manufactured in Milan, Italy as a joint venture between Flowserve and Valbart known as Flowserve/Valbart Flow
Control Srl. The TMCBV merges the robust, proven Valbart trunnion-guided pipeline valve design with advanced Flowserve
technologies for characterized control and noise attenuation. We designed the TMCBV to be a more compact, less expensive choice in services in which it had been previously necessary to use a larger, more expensive valve style.
The TMCBV is designed to operate at high pressures while minimizing the torque needed to operate the valve. The seats are
spring-preloaded and process energized for Class IV or Class V shutoff at any pressure. The TMCBVs capacity is greater
than that of a comparable globe valve - allowing the customer to use a smaller TMCBV. The customer receives cascading
savings from using a smaller, lighter valve. It requires a smaller, less expensive actuator and lighter, less expensive pipe
supports. Delivery charges are reduced, and the smaller valve is easier to install in tight piping runs.
Rotary seals, precision machining, and accurate trunnion guiding, all contribute to zero external leakage, ensuring that the
TMCBV meets all environmental standards.
Product Range
Application
Control ball valves for normal throttling
ANSI Pressure Class

150 600
900 1500
2500
150 and above
Control ball valves for severe service
Size Range
6" 56"
6" 48"
6" 24"
6" 48"
Difference in cost and weight
Body Styles
To achieve a Cv of 9,000 in a Class 300 valve body

Globe Valve
TMCBV
Side-entry
Welded body
Line Size
36"
24"
Weight
Cost
23,148 lbs $200,000
8,377 lbs $99,600
Top entry
Materials
The TMCBV is offered in many alloys. Steels, Stainless, Duplex,
Super Duplex or Nickel alloys are among the many available
choices. Specify your material requirements in your inquiry.
Pressure Regulation
flowserve.com
Trims
Flowserve has been the industry leader in noise attenuation
technology for over 30 years. Now we have merged advanced Flowserve technologies with the robust, industry-leading, Valbart trunnion-mounted ball valve.
We offer trims based upon Valteks proven globe-valve trim
design principles. These trim designs are widely known for
effectiveness and innovation. These concepts are further optimized and refined for rotary application through extensive
CFD analysis and laboratory testing.
Noise-control trims are based on Valteks Megastream technology.

The N1 trim controls velocity as it stages the pressure drop across flat
plates in the bore of the ball, progressively decreasing the resistance as
the flow encounters fewer plates as the valve is opened. 10-20 dB attenuation can be expected. The N2 trim is more advanced and uses multiple
baffles to absorb pressure drops in steps and to acoustically prevent noise by wave-front cancellation as well as tuned resonance in high, lessaudible frequencies. Attenuation of up to 30dB may be realized.
N1
N2
The Z1 and Z2 trims use angled plates to give a progressive, continuous characteristic while forcing the
flow through multiple self-cleaning stages. Z-trims
serve for cavitation control prevention and for noise
attenuation up to 20dB.
Z1
The TMCBV system offers more trim choices than

any other valve in the industry. Let us optimize your
application with our technology.
Z2
3
Automation Systems
The Valbart TMCBV system includes unmatched
Flowserve automation to meet your needs and your specifications. For pneumatic actuation, we use the RG Series
scotch yoke actuator. When Electric actuation is required
we offer the Flowserve Limitorque MX. Custom actuation
is available to meet your specifications. All of these actuators will be supplied with the appropriate precision analog
or digital Flowserve positioner. Flowserve Logix digital positioners are gas-compatible. A piped vent gives zero emission. Unlike pilot controllers, Logix positioners may use
Flowserves ValveSight continuous monitoring system,
and are capable of being commanded to perform safety or
other control functions. All components are manufactured
by Flowserve. All are selected to complement each other,
and Flowserve provides single-source support.
RG
Limitorque
FCD VLENBR0068-01 03/12 Printed in USA and France.
To find your local Flowserve representative:

For more information about Flowserve Corporation,
visit www.flowserve.com.
Logix 3000 series
Flowserve Valbart Flow Control Srl

20050 Mezzago (Milan) Italy
Phone: +39.039.624111
Fax: +39.039.6241178
Flowserve Valbart - Americas

14215 Westfair West
Houston, TX 77041 USA
Phone: +1.281.671.1025
Fax: +1.281.671.1609
www.flowserve.com
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely during its useful life.
However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often
does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation,
operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in
the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory results by
reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving and upgrading its product
design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any
one of its worldwide operations or offices.
2012 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.
flowserve.com
flowserve.com

Pipelinereg

Uploaded by

Copyright:

Available Formats

Pipelinereg

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pipelinereg

Uploaded by

Copyright:

Available Formats

TMCBV

Trunnion-Mounted Control Ball Valve

ANSI Pressure Class

Control ball valves for severe service

Difference in cost and weight

To achieve a Cv of 9,000 in a Class 300 valve body

Noise-control trims are based on Valteks Megastream technology.

The TMCBV system offers more trim choices than

FCD VLENBR0068-01 03/12 Printed in USA and France.

To find your local Flowserve representative:

Logix 3000 series

Flowserve Valbart Flow Control Srl

Flowserve Valbart - Americas

You might also like