Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    Series LFMMV-HTK: Hot Water Tank Enhancer

    Uploaded by

    Watts
    WARNING: this product must be tested periodically in compliance with local codes, but at least once per year or more as service conditions warrant. Regular checking and cleaning of the product's internal and external components helps assure maximum life and proper product function. If the information provided here is not consistent with local codes and ordinances, the local codes should be followed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Series LFMMV-HTK: Hot Water Tank Enhancer

    Uploaded by

    Watts
    46 views2 pages
    WARNING: this product must be tested periodically in compliance with local codes, but at least once per year or more as service conditions warrant. Regular checking and cleaning of the product's internal and external components helps assure maximum life and proper product function. If the information provided here is not consistent with local codes and ordinances, the local codes should be followed.

    Original Title

    2915187

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    WARNING: this product must be tested periodically in compliance with local codes, but at least once per year or more as service conditions warrant. Regular checking and cleaning of the product's internal and external components helps assure maximum life and proper product function. If the information provided here is not consistent with local codes and ordinances, the local codes should be followed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    46 views2 pages

    Series LFMMV-HTK: Hot Water Tank Enhancer

    Uploaded by

    Watts
    WARNING: this product must be tested periodically in compliance with local codes, but at least once per year or more as service conditions warrant. Regular checking and cleaning of the product's internal and external components helps assure maximum life and proper product function. If the information provided here is not consistent with local codes and ordinances, the local codes should be followed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    IS-LFMMV-HTK

    Series LFMMV-HTK
    Hot Water Tank Enhancer
    Installation Instructions
    ! WARNING
    Read this Manual BEFORE using this equipment.
    Failure to read and follow all safety and use information
    can result in death, serious personal injury, property
    damage, or damage to the equipment.
    Keep this Manual for future reference.

    ! WARNING
    Need for Periodic Inspection/Maintenance: This product
    must be tested periodically in compliance with local codes,
    but at least once per year or more as service conditions
    warrant. All products must be retested once maintenance
    has been performed. Corrosive water conditions and/or
    unauthorized adjustments or repair could render the product
    ineffective for the service intended. Regular checking and
    cleaning of the products internal and external components
    helps assure maximum life and proper product function.

    ! WARNING
    Local building or plumbing codes may require modifications to the information provided. You are required to
    consult the local building and plumbing codes prior
    to installation. If the information provided here is not
    consistent with local building or plumbing codes, the
    local codes should be followed. This product must be
    installed by a licensed contractor in accordance with
    local codes and ordinances.

    Installation Instructions
    Valve should be installed and adjusted by a licensed contractor
    with local codes and ordinances. Further, this valve should be
    positioned to allow easy access for cleaning, service andadjustment.
    1. C
     onnect hot water side of the valve to the hot water outlet ofthe
    hot water tank. Make sure strainer gasket is in place.

    2. Install elbow to the mixed outlet of the valve. Make suregasket is in place.
    3.Connect tee to the cold inlet of the hot water tank, ensuringthat mixing valve connection is aligned to allow connection to thecold side of the thermostatic mixing valve with a
    flexible hose.
    4.Connect female threaded side of the corrugated stainless
    steel connector to the cold inlet of the thermostaticmixing
    valve and male threaded side to the tee (As shown in Figure 1)
    5.Install nipple to the tee and connect cold water inlet supply to
    the nipple

    Specification
    Temperature Adjustment

    80 to 120F (27 to 49C)

    Approach Temperature

    5F (3C) above set point

    Maximum Operating Pressure

    125psi (861 kPa)

    Maximum Hot Water Temperature 200F (93C)


    Cold Water Temperature Range

    39 - 80F (5 - 27C)

    Maximum Pressure Differential


    Between Hot and Cold Supplies

    25%

    6.Connect system hot water outlet supply to the elbow connected to the thermostatic mixing valve outlet.
    7.Turn on cold water supply and then hot water supply. Check
    for leaks.
    8.Adjust temperature to desired setting (see Temperature
    Adjustment Section).

    Minimum Flow 0.5gpm (1.90lpm) when


    tested in accordance with
    ASSE1017 & ASSE 1070
    Flow at 45psi pressure drop

    13gpm (49lpm)

    Figure 1

    Listing (valve only) ASSE 1017, ASSE1070 and


    IAPMO cUPC

    *The wetted surface of this product contacted by consumable water


    contains less than 0.25% of lead by weight.
    Thermostatic valve only

    Watts LFMMV-M1 Troubleshooting Guide


    Capacity**

    Temperature Adjustment

    kpa psi
    345 50

    2. T
     urn hot water on at the nearest outlet which is being suppliedby
    the valve. Let the water run for at least two minutes to allow supply temperature to stabilize. Make sure to use thermometer to
    measure the water temperature.

    Pressure Drop

    1. M
     ake sure hot water tank is turned on and supplying hot water to
    the thermostatic mixing valve

    276

    40

    207

    30

    138

    20

    69 10

    3. S
     ee below to adjust the temperature setting of the thermostatic
    valve (Figure 2)
    Figure 2

    Turn

    2
    7.6

    4
    15

    6 8
    23 30

    10
    38

    12
    46

    14 gpm
    53 lpm

    Flow curves are for reference. Actual flows may vary depending on system temperatures and/or pressures.
    **Flow curve with integral inlet filters and check valves

    Hotter

    Colder

    / " Hex Wrench

    3 32

    Symptom

    WARNING: This product contains chemicals known


    to the State of California to cause cancer and birth
    defects or other reproductive harm.
    For more information: www.watts.com/prop65

    Unscrew, lift
    cap to adjust

    Cause

    Solution

    Unable to reach required set point or 1. Supply temperatures not within speciset point difficult to set
    fied limits
    2. Hot and cold supplies reversed
    Unable to achieve required flow

    Valve does not maintain required


    temperature or temperature changes
    over time
    Discharge temperature too hot or
    too cold
    Valve is noisy

    3. Filters are blocked by debris


    1. Too much pressure drop at the fixture
    2. Check valves /filters blocked by debris
    1. Fluctuation in supply pressure

    2. R
     einstall valve with supplies to correct connections
    3. Clean filters
    1. M
     easure supply pressures and check
    against flow chart. Look for restrictions in
    valve or piping
    2. Clean check valves/filters
    1. S
     tabilize water pressures with pressure
    regulating or balancing valves

    2. Check valves /filters blocked by debris

    2. Clean check valves/filters

    Valve not calibrated properly

    Readjust valve temperature per installation


    instructions
    1. R
     educe water velocity with pressure regulating valve
    2. C
     heck flow required versus rated flow
    capacity of the valve
    Clean check valves/filters
    1. S
     tabilize water pressures with pressure
    regulating or balancing valves
    2. Clean check valves/filters

    1. Water velocity is too high


    2. Valve is not sized properly

    No flow from valve


    Flow from the valve fluctuates

    1. C
     heck differential temperature between hot
    and cold supplies 5F (3) required

    Check valves /filters blocked by debris


    1. Fluctuation in supply pressure
    2. Check valves /filters blocked by debris

    Limited Warranty: Watts Regulator Co. (the Company) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of
    original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
    THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER
    WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
    The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special
    or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting
    from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no
    control. This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.
    Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages. Therefore the above
    limitations may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to
    determine your rights. SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.

    A Watts Water Technologies Company

    IS-LFMMV-HTK 1538

    USA: Tel: (978) 689-6066 Fax: (978) 975-8350 Watts.com


    Canada: Tel: (905) 332-4090 Fax: (905) 332-7068 Watts.ca
    Latin America: Tel: (52) 81-1001-8600 Fax: (52) 81-8000-7091 Watts.com

    EDP#2915187

    2015 Watts

    You might also like