Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 430 views

    Abb Focs Data Sheet Sensor Corriente PDF

    Uploaded by

    djsb00
    ABB FOCS is a family of high accuracy sensors for industrial high current measurement applications based on the magneto-optic effect. The Sensor Head is connected to the Sensor Electronics via a glass sensor fiber cable. With corresponding Sensor Head sizes, it offers an easily installed, interference-free alternative to the Hall effect current transducers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Abb Focs Data Sheet Sensor Corriente PDF

    Uploaded by

    djsb00
    430 views2 pages
    ABB FOCS is a family of high accuracy sensors for industrial high current measurement applications based on the magneto-optic effect. The Sensor Head is connected to the Sensor Electronics via a glass sensor fiber cable. With corresponding Sensor Head sizes, it offers an easily installed, interference-free alternative to the Hall effect current transducers.

    Original Title

    abb focs data sheet sensor corriente.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ABB FOCS is a family of high accuracy sensors for industrial high current measurement applications based on the magneto-optic effect. The Sensor Head is connected to the Sensor Electronics via a glass sensor fiber cable. With corresponding Sensor Head sizes, it offers an easily installed, interference-free alternative to the Hall effect current transducers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    430 views2 pages

    Abb Focs Data Sheet Sensor Corriente PDF

    Uploaded by

    djsb00
    ABB FOCS is a family of high accuracy sensors for industrial high current measurement applications based on the magneto-optic effect. The Sensor Head is connected to the Sensor Electronics via a glass sensor fiber cable. With corresponding Sensor Head sizes, it offers an easily installed, interference-free alternative to the Hall effect current transducers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2
    At a glance
    Powered by AI
    ABB FOCS is a fiber-optic current sensor that offers high accuracy current measurement for industrial applications using magneto-optic effects. It provides an easily installed alternative to hall effect sensors.

    ABB FOCS offers simplified installation, easy commissioning, increased accuracy, negligible power consumption, and a digital output. It consists of a sensor head connected to sensor electronics via an optical fiber cable for galvanic isolation.

    ABB FOCS has a measuring range up to 500kA, accuracy of ±0.1%, repeatability of ±0.02%, linearity of ±0.1%, and sampling rate of 4kHz. It provides protection functions, analog/digital outputs, communication interfaces, and ambient condition compliance.

    ABB FOCS Fiber-Optic Current Sensors

    Bout

    Data Sheet

    Cvert

    Sensor Electronics dimensions (W x H x D):


    450 mm x 101 mm x 136 mm.
    Sensor Electronics weight: 5 kg.
    Sensor fiber cable length
    (Sensor Head to Sensor Electronics):
    15 m standard cable
    Minimum length: 10 m
    Maximum length: 70 m.
    Sensor Head weight: <15 kg.
    Optional control cubicle dimensions
    (W x H x D):
    800 mm x 1000 mm x 300 mm.

    Hmax

    Physical Dimensions

    Hout

    Bmax

    Chor

    Sensor Head Type Code


    Standard Sensor Head dimensions (other sizes
    may be available)
    HeadType
    Code

    B
    out
    [mm]

    H
    out
    [mm]

    B
    max.
    [mm]

    H
    max.
    [mm]

    C
    Seg. hor.
    [mm]

    C
    Seg. vert.
    [mm]

    H-1
    H-2
    H-3
    H-4
    H-5
    H-6
    H-7

    855
    1250
    1750
    1750
    2250
    2750
    3250

    855
    1250
    1250
    1750
    1750
    1750
    1750

    441
    836
    1336
    1336
    1836
    2336
    2836

    441
    836
    836
    1336
    1336
    1336
    1336

    105
    500
    1000
    1000
    1500
    2000
    2500

    105
    500
    500
    1000
    1000
    1000
    1000

    Ordering Information
    Ordering Type Code

    Product Name
    Main
    Type Code

    Accessories
    Type Code

    Sensor Head
    Type Code

    ABB FOCS

    ABB FOCS-xxx-Lxx

    ASVn PLn PBmn CCmnopq PNLn

    Hx

    Example:

    ABB FOCS-225-L18

    ASV1 PL0 PB10 CC11111 PNL0

    H3

    Fiber-Optic Current Sensors


    Dept. ATPR/FOCS
    Austrasse
    CH-5300 Turgi
    Switzerland
    Web:
    email:
    Tel:
    Fax:

    www.abb.com/powerelectronics
    focs@ch.abb.com
    +41 - 58 - 589 39 39
    +41 - 58 - 589 30 00

    Copyright 2005 ABB. All rights reserved.


    Specifications are subject to change without notice.

    focs_data_sheet.indd 12-1

    3BHS209603 ZAB E01_REV

    ABB Switzerland Ltd

    25.01.2005 09:34:06

    The new ABB FOCS Fiber-Optic Current


    Sensor is a family of high accuracy sensors
    for industrial high current measurement
    applications based on the magneto-optic
    effect.

    The Sensor Head is connected to the Sensor


    Electronics via a glass sensor fiber cable. This
    cable cannot be detached from the Sensor
    Electronics.

    ABB FOCS is available for uni- or bi-directional dc current measurement up to 500 kA.
    With corresponding sensor head sizes, it
    offers an easily installed, interference-free
    alternative to the Hall effect current transducers.

    No software engineering is necessary on site.

    All data conditioning and monitoring functions


    provided by ABB FOCS, including scaling and
    calibration, are designed and tested at works.
    ABB FOCS is delivered with standard firmware
    installed and ready for operation.
    Sensor
    Electronics

    Control Cubicle (optional)

    Highlights
    ABB FOCS is an unique fiber optic current
    measurement device designed for simplified
    installation, easy commissoning, increased
    accuracy, and a digital signal for greatly enhanced data acquisition management and negligible power consumption.

    Sensor Head
    Current Carrying
    Busbars

    Sensor Fiber
    Cable

    ABB FOCS Typical Layout

    Performance
    Measuring range: 0 to 500 kA (depending
    on type), 20 % overcurrent capacity.
    Accuracy (1 to 120 % of rated current):
    0.1 % of the measured value.
    Repeatability: 0.02 %.
    Linearity (1 to 120 % of rated current): 0.1 %.
    Sampling rate: 4 kHz.
    Temperature sensitivity: < 0.002 % / C.

    Features

    ABB FOCS Measuring Principle

    The sensor consists of a single-ended optical


    fiber and the Sensor Electronics, including light
    source, optical detection circuit and digital signal processor. One sensing fiber loop is mounted around the current carrying busbar.
    The measured signal is independent of the particular busbar arrangement and insensitive to
    magnetic stray fields from neighboring busbars.
    The Sensor Electronics is galvanically isolated
    from the Sensor Head and the busbars.

    focs_data_sheet.indd 2-3

    Available in different standard dimensions,


    according to the dimensions of the busbar
    (see Physical Dimensions).
    Sensor Electronics galvanically separated
    from Sensor Head and current busbar.
    Optional control cubicle with optional
    Process Panel PP210.
    Sensor Electronics mounted on standard DIN
    rails.
    Two analog outputs corresponding to the
    measured dc current with selectable combinations:
    0...20 mA and 0...1 V, unidirectional
    4...20 mA and 0.2...1 V, unidirectional
    20 mA and 1 V, bidirectional.

    Communication with external control


    systems:
    ABB PowerLINK, used to interface the
    Sensor Electronics with an AC 800PEC
    controller by means of fiber optic cables.
    Standard optical module UF D128 for plastic optical fiber (POF) or optional optical
    module UF D130 for glass optical fiber
    (GOF) can be used.
    PROFIBUS DP fieldbus (optional) to connect the Sensor Electronics to any third
    party external control system. The Sensor
    Electronics operates as PROFIBUS DP
    slave.
    Ah and kAh counter pulses: 100 Amperehour and 1 kilo Ampere-hour pulses via
    PROFIBUS and PowerLINK.
    DC-current protection
    Instantaneous overcurrent detection
    Inverse time overcurrent detection
    Reverse current detection.
    3 status relays with changeover contacts.

    Degree of protection
    Sensor Electronics: IP00, always to be
    mounted in a control
    cubicle
    Sensor Head:
    Not applicable, to be
    protected against rain
    and sunlight.
    Emitted noise:
    <55 dB (A).

    Models and Ratings


    Main Type Code
    kA
    20
    30
    45
    60
    80
    100
    130
    155
    180
    225
    260
    300
    350
    400
    450
    500

    Power Supply
    Redundant 24 Vdc input, 15 %, +20 %.
    Power consumption: <60 W.

    Ambient Requirements
    Operating temperature
    Sensor Head: 40 to +80 C.
    Sensor Electronics:
    25* to +65 C (mounted in a cubicle with
    forced air cooling)
    25* to +55 C (with natural air
    convection).
    * With PROFIBUS module: min. temp. 0 C.
    Storage temp.:
    40 to +70 C.
    Humidity:
    RH=5-95 % (compliance
    with standard EN 61131-2).
    Pollution degree: Degree 2 (compliance with
    standard IEC 60664).
    Altitude:
    4000 m (compliance with
    standard IEC 60068-2-13).

    Type
    ABB FOCS-20
    ABB FOCS-30
    ABB FOCS-45
    ABB FOCS-60
    ABB FOCS-80
    ABB FOCS-100
    ABB FOCS-130
    ABB FOCS-155
    ABB FOCS-180
    ABB FOCS-225
    ABB FOCS-260
    ABB FOCS-300
    ABB FOCS-350
    ABB FOCS-400
    ABB FOCS-450
    ABB FOCS-500

    Measuring range
    in kA

    Length of sensor
    fiber cable in
    meters (1070 m)

    ABB FOCS 100 L10

    Accessories Type Code


    Auxiliary supply
    0 24 Vdc from plant mains supply
    1 Variable (85 264 Vac, 47 65 Hz / 90 350 Vdc),
    additional power supply
    2 Special on request
    PowerLink
    0 UF D128 (POF)
    1 UF D130 (GOF)
    Profibus DP
    00 None
    10 Slave module
    11 Slave module + OLM/P12 (POF)
    12 Slave module + OLM/G12 (GOF)

    ASVn PLn PBmn CCmnopq PNLn


    Wall mounted control cubicle
    00000 None
    11111 Standard
    Any 2 Customized
    m
    n
    o
    p
    q

    Type of control cubicle


    Color for control cubicle
    Lock type
    Size of control cubicle
    Cable Entry

    Process panel
    0 None
    1 Process Panel 210

    25.01.2005 09:34:18

    You might also like