Rsnetworx

RSNetWorx
RSNETWORX FOR DEVICENET

GETTING RESULTS GUIDE
PUBLICATION DNET-GR001H-EN-EOctober 2015
Supersedes Publication DNET-GR001G-EN-E
DeviceNetnew.book Page ii Tuesday, September 22, 2015 4:05 PM
Contact Rockwell
Customer Support Telephone 1.440.646.3434

Online Support http://support.rockwellautomation.com/
Copyright Notice
2015 Rockwell Automation Technologies, Inc. All rights reserved.

This document and any accompanying Rockwell Software products are copyrighted by
Rockwell Automation Technologies, Inc. Any reproduction and/or distribution without prior
written consent from Rockwell Automation Technologies, Inc. is strictly prohibited. Please refer
to the license agreement for details.
Trademark Notices
Allen-Bradley, ControlLogix, FactoryTalk, PLC-2, PLC-3, PLC-5, Rockwell Automation,

Rockwell Software, RSLinx, RSView, and the Rockwell Software logo are registered
trademarks of Rockwell Automation, Inc.
The following logos and products are trademarks of Rockwell Automation, Inc.:
RSLogix, Data Highway Plus, DH+, RSView, FactoryTalk View, RSView Studio, FactoryTalk
View Studio, RSView Machine Edition, FactoryTalk View ME, RSView Supervisory Edition,
FactoryTalk View SE, RSView32, WINtelligent, FactoryTalk Activation, FactoryTalk
Administration Console, FactoryTalk Alarms and Events, FactoryTalk Automation Platform,
FactoryTalk Services Platform, FactoryTalk Directory, FactoryTalk Live Data, RSAssetSecurity,
FactoryTalk Security, RSSql, FactoryTalk Transaction Manager, MicroLogix, RSLinx Classic,
RSLinx Enterprise, RSNetWorx, RSNetWorx for ControlNet, RSNetWorx for DeviceNet,
RSNetWorx for EtherNet, RSNetWorx for EtherNet/IP, SLC 5, RSLadder, and RSTrend.
Other Trademarks
ActiveX, Microsoft, Microsoft Access, SQL Server, Visual Basic, Visual C++, Visual
SourceSafe, Windows, Windows ME, Windows NT, Windows 2000, Windows Server 2003,
Windows XP, and Windows Vista are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
ControlNet is a registered trademark of ControlNet International.
DeviceNet is a trademark of the Open DeviceNet Vendor Association, Inc. (ODVA).
Ethernet is a registered trademark of Digital Equipment Corporation, Intel, and Xerox
Corporation.
OLE for Process Control (OPC) is a registered trademark of the OPC Foundation.
Oracle, SQL*Net, and SQL*Plus are registered trademarks of Oracle Corporation.
All other trademarks are the property of their respective holders and are hereby acknowledged.
Warranty
This product is warranted in accordance with the product license. The products performance
may be affected by system configuration, the application being performed, operator control,
maintenance and other related factors. Rockwell Automation is not responsible for these
intervening factors. The instructions in this document do not cover all the details or variations in
the equipment, procedure, or process described, nor do they provide directions for meeting
every possible contingency during installation, operation, or maintenance. This products
implementation may vary among users.
This document is current as of the time of release of the product; however, the accompanying
software may have changed since the release. Rockwell Automation, Inc. reserves the right to
change any information contained in this document or the software at anytime without prior
notice. It is your responsibility to obtain the most current information available from Rockwell
when installing or using this product.
Modified: September 22, 2015 16:04:01
DeviceNetnew.book Page iii Tuesday, September 22, 2015 4:05 PM
Preface
2 Welcome
Purpose of this document

This getting results guide provides you with information on how to install and navigate
the RSNetWorx for DeviceNet software. It explains how to effectively use the
RSNetWorx for DeviceNet software and how to access and navigate the online help.
Intended audience
We assume that you are familiar with:
IBM compliant personal computers

Microsoft Windows operating systems
RSLinx Classic communications software
How does the getting results guide fit in with other Rockwell
Software product documentation?
The Getting Results with RSNetWorx for DeviceNet guide can be considered the entry
point into Rockwell Softwares documentation set for this product. Other components of
the documentation set include online help, Online Books, a product tutorial, and
electronic release notes.
The documentation set contains pertinent, easily accessible product information. This set
ships with the software product, and is designed to free you from tedious paper shuffling
and reduce information overload.
Online help
The online help includes all overview, procedural, screen, and reference information for
the product. The help contains these basic components: overview topics, quick start
topics, step-by-step procedures, troubleshooting topics, and screen element descriptions
(for example, text boxes, drop-down lists, and option buttons). All of the help is contextsensitive with the application and provides you with immediate access to application tasks
and screen element descriptions. Refer to the Finding the information you need chapter
in this guide for a more detailed description of the online help.
Product Manuals
Within RSNetWorx for DeviceNet, we provide a Product manuals feature that allows you
to immediately access and search your product documentation from the Help menu. This
feature includes the Getting Results with RSNetWorx for DeviceNet guide, as well as
iii
DeviceNetnew.book Page iv Tuesday, September 22, 2015 4:05 PM
RSNETWORX FOR DEVICENET GETTING RESULTS GUIDE
several hardware product reference guides, in an electronic book format. As a part of the
product installation, you have the option of installing these electronic books to your local
hard drive during installation, or access them directly from the CD-ROM.
The Product Manuals included with RSNetWorx for DeviceNet are in portable document format
(PDF), and must be viewed using the Adobe Acrobat Reader software included on your
RSNetWorx for DeviceNet CD. You can install or run Acrobat Reader directly from the CD.
Tutorial
RSNetWorx for DeviceNet contains a product tutorial, which includes basic overview
information and specific tasks and examples for successfully working with the product.
This tutorial is available from Start > Programs > Rockwell Software > RSNetWorx >
RSNetWorx for DeviceNet Tutorial.
Document conventions
The conventions used throughout this document for the user interface comply with those
recommended by Microsoft. If you are not familiar with the Microsoft Windows user
interface, we recommend that you read the documentation supplied with the operating
system you are using before attempting to use this software.
Feedback
Please use the feedback form packaged with your software to report errors or let us know
what information you would like to see added in future editions of this document. You can
also send an email message to info@software.rockwell.com with any comments about
Rockwells products and services.
iv
DeviceNetnew.book Page v Tuesday, September 22, 2015 4:05 PM
Contents
Preface
iii
Purpose of this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Intended audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
How does the getting results guide fit in with other Rockwell Software product documentation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Online help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Product Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Tutorial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Document conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
1 Welcome to RSNetWorx for DeviceNet
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Understanding DeviceNet concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Exploring RSNetWorx for DeviceNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Title bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Menu bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tool bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Hardware and Favorites lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Configuration view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Diagnostics view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Message view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Quick Start steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Online mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Offline mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2 Installing and Starting RSNetWorx for DeviceNet

Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Considerations when using RSLinx Classic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing RSNetWorx for DeviceNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
17
17
17
18
18
18
19
19
DeviceNetnew.book Page vi Tuesday, September 22, 2015 4:05 PM
Installing a client copy from a dedicated server . . . . . . . . . . . . . . . . . . . . . . . . . .

Updating an existing installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting RSNetWorx for DeviceNet software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Advanced Concepts
EDS-based devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EDS library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DeviceNet node commissioning tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Commissioning devices on a DeviceNet network . . . . . . . . . . . . . . . . . . . . . . . .
Commissioning a device via a point-to-point connection . . . . . . . . . . . . . . . . . .
Faulted Address Recovery Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Class Instance Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Finding the Information You Need

Using the online help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing help for a control or field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing help for error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding step-by-step procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing the Product Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tutorial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When you call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Activation
Activate RSNetWorx with FactoryTalk Activation . . . . . . . . . . . . . . . . . . . . . . . . . . .
Node-locked activation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Concurrent activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to activate RSNetWorx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding more information about FactoryTalk Activation . . . . . . . . . . . . . . . . . .
Grace period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Some common questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding more information about activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B Security
20
21
21
22
23
23
23
24
24
25
25
26
27
27
28
28
30
31
31
32
32
32
33
35
35
35
35
35
36
36
37
37
39
How do I set up security in RSNetWorx? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

What can I secure in RSNetWorx? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
vi
DeviceNetnew.book Page vii Tuesday, September 22, 2015 4:05 PM
C Glossary
45
Index
47
vii
CONTENTS
DeviceNetnew.book Page viii Tuesday, September 22, 2015 4:05 PM
viii
DeviceNetnew.book Page 1 Tuesday, September 22, 2015 4:05 PM
Welcome to RSNetWorx for DeviceNet
1 Placeholder
RSNetWorx for DeviceNet is a 32-bit Windows application program that allows you to
configure DeviceNet devices. Using a graphical or spreadsheet representation of your
network, you can configure all devices on the network.
This chapter contains the following sections:
Features and benefits

Understanding DeviceNet concepts
Exploring RSNetWorx for DeviceNet
Quick Start steps
Features
The current release of RSNetWorx for DeviceNet contains the following new features:
Support for SmartGuard EIP hardware.

Support for DeviceLogix 5.0.
Support for third party DeviceNet scanners whose vendor IDs are not Rockwell. The
third party DeviceNet scanner is supported if the EDS is licensed. Devices whose EDS
are licensed and can pass the CRC License check are supported.
Support for Molex Safety slave device and any safety static configuration device.
There are no parameters or assemblies you need to configure. The Configuration
Signature field in the device Safety page is enabled, allowing you to set the proper
value. For the static safety I/O device, you must configure the Configuration
Signature field before you can setup the connection with a scanner.
DeviceLogix enhancements that include:
Logic Enable and Logic Disable menu options for selected DeviceLogix devices
that are online and for all DeviceLogix devices on a network.
Remember the last project folder when a project is opened or a new project is
created.
Display a logic enabled or logic disabled state icon of a DeviceLogix device when
the device is online.
The duplicate device name is no longer changed to an EDS product name. Instead
the node address is added to the head of the base device name to make the new
device name unique.
Understanding DeviceNet concepts

The DeviceNet network is a control area network that logically connects input/output
(I/O) devices to processors via DeviceNet scanners rather than directly to discrete I/O
modules located in processor racks. Scanners reduce the burden placed on processors by
handling all the I/O device management.
Each DeviceNet network supports up to 64 nodes. The data rate and node address of all
the devices connected to the network are user-configurable. Both the signal and the power
wires are bundled in the same cable. Several different types of connectors are available.
The signal lines are terminated at each end to insure that the line remains balanced.
The topology of a DeviceNet network can be a drop line configuration (devices are
connected to the network by drop lines and network taps), a trunk line configuration
(devices are connected in a daisy chain fashion), or any combination of these
configurations. For example, several devices could be daisy-chained together and then
connected to the network via a network tap.
The DeviceNet specification is maintained by the Open DeviceNet Vendors Association,
Inc. (ODVA). ODVA is an independent organization of product suppliers. For more
information about ODVA products and services, visit their web site at
http://www.odva.org.
1 WELCOME TO RSNETWORX FOR DEVICENET
Exploring RSNetWorx for DeviceNet
Title bar
Menu bar
Toolbar
Hardware list
Message view
Favorites view
Configuration view
1 Placeholder
When you start RSNetWorx for DeviceNet software, the RSNetWorx for DeviceNet
window appears. It shows the current network (DeviceNet is the default name) in its view.
The following illustration shows the RSNetWorx for DeviceNet window and the design
elements associated with it. Each of the design elements are described in the sections
following this illustration.
Title bar
The title bar shows the RSNetWorx icon, the name of the current RSNetWorx
configuration, the name of the software product, (i.e., RSNetWorx for DeviceNet), and the
Minimize, Maximize, and Close buttons.
To view the Control Menu, click the RSNetWorx icon on the title bar. The following items
appear on the Control Menu.
Item
Description
Restore
Restores the window to its former size after you enlarged it by using the
Maximize command or shrunk it by using the Minimize command.
Move
Allows you to reposition the window on the desktop using the arrow keys on
the keyboard.
Size
Allows you to resize the window by using the arrow keys on the keyboard.
Minimize
Shrinks the window to an icon, which is located on the task bar. This performs
the same function as if you clicked the Minimize button on the title bar.
Maximize
Enlarges the window to occupy the entire screen. This performs the same
function as if you clicked the Maximize button on the title bar.
Close
Exits the RSNetWorx application. This performs the same function as if you
clicked the Close button on the title bar.
Menu bar
1 Placeholder
The RSNetWorx for DeviceNet menu bar contains the following menus:
Each menu contains options for performing the following tasks:
Menu
Description
File
Create, print, and save a network configuration, or exit RSNetWorx for

DeviceNet.
Edit
Invoke actions such as cut, copy, and paste on selected items in the
network configuration.
View
Set and change RSNetWorx for DeviceNet interface displays and access
specialized tools.
Network
Choose browsing options, upload or download network information, view

network properties, or enable or disable DeviceLogix devices that are online.
Device
Upload or download device information, resolve device mismatches, view

device properties, or enable or disable DeviceLogix devices that are online.
Diagnostics
Start and stop diagnostics, add/remove devices from the diagnostic scan, select
and troubleshoot a fault, specify diagnostic options, or generate a diagnostics
report.
Tools
Access the EDS Wizard, the node commissioning tool, or the Faulted Address
Recovery (FAR) wizard.
Help
View help options for RSNetWorx for DeviceNet and other Rockwell Software
products and services.
Tool bars
The tool bars contain shortcuts to several commonly used functions. Each button on the
tool bars is a graphical representation of a command (except the Symbol Legend) that is
also available from the RSNetWorx for DeviceNet menu bar. RSNetWorx for DeviceNet
contains the standard tool bar and the tools tool bar.
The following items appear on the RSNetWorx for DeviceNet standard tool bar.
Icon
Menu Selection
Description
File > New
Creates a new network configuration.
File > Open
Opens an existing network configuration. The arrow to the

right of the Open icon provides quick access to recently used
files.
File > Save
Saves the current network configuration.
File > Print
Prints the current network configuration.
Edit > Cut
Cuts the selected device from the network configuration and

places it on the clipboard.
Edit > Copy
Copies the selected device to the clipboard.
Edit > Paste
Pastes the device from the clipboard to the current network

configuration.
Help > Whats This? Places the cursor in Whats This? help mode. Place the cursor
on the control you want help with and right-click to see the
context-sensitive help.
The following items appear on the RSNetWorx for DeviceNet tools tool bar.
Menu Selection
Description
View > Zoom-In
Increases the size of the images located in the current network

configuration. The choices available are high, medium, and
low. Zoom-In only applies to the graph view.
View > Zoom-Out
Decreases the size of the images located in the network

configuration. The choices available are high, medium, and
low. Zoom-Out only applies to the graph view.
View > Hardware
Displays a list of all available hardware devices.
View > Favorites
Displays a list of hardware devices that you have added to

your favorites list.
1 Placeholder
Icon
Network > Single Pass Locates all currently available devices based on the drivers
Browse or Network > configured in RSLinx Classic. Allows you to browse once and
Continuous Browse stop (single pass) or browse continuously (continuous
browse).
Network > Online
Places RSNetWorx for DeviceNet in online mode. To go

offline, click the button or choose Network > Online again.
View > Diagnostics
Displays the Diagnostic view, allowing you to view the

diagnostic parameters for all of the devices on your network,
and indicates the current diagnostic status of your network.
View > Refresh
Refreshes the window. This will reorder the graphic display

by device address.
No menu selection
Displays the Symbol Legend, which contains descriptions of

the device comparison states.
Hardware and Favorites lists

A device can be added to the network configuration by selecting it from the Hardware
view and dragging it to the Configuration view. Once a device is added, it will display in
the appropriate configuration. The Favorites view displays all hardware devices that you
have defined as favorites by selection from the Hardware list.
Configuration view
1 Placeholder
The Configuration view displays network information in a graphical, spreadsheet, or

master/slave form. For example, this graphical application workspace shows the devices
that currently exist on the network. The Spreadsheet view of the configuration displays
the names of all devices on the network along with state, node, slot, and description
information. You can add a device to the project by selecting it from the Hardware view
and dragging it into the configuration view. The Master/Slave Configuration view
displays any scanner to target device relationships that exist among the devices in your
current DeviceNet configuration.
Diagnostics view
RSNetWorx MD provides a hierarchal view of the real-time status (or health) of a
network. At a glance, you can quickly and easily determine the overall status of your
network, or any device on your network, by viewing a single status indicator. Click the
Diagnostics tab in the network configuration to display this view.
Displays any network and/or device problems Displays the troubleshooting page
for warning or error diagnostics
that are detected on your network
Starts or stops the
diagnostic scan
Displays a count
of diagnostics
by state
10
Message view
an icon
an error code (including a distinguishing software component designator and a 16-bit
numeric designator)
a timestamp that displays the date and time the message is generated
a description of the message
This view may contain informational, warning, and/or error messages, as indicated in the
following table:
Icon
Description
Error
Warning
Informational
If you want more information on any particular message, you can select the message and
press the F1 key to access the online help. You can show, clear, copy, and/or clear and
hide messages by making the appropriate selection from the View > Messages command
on the main menu, or by right-clicking and selecting the Message option while in the
Message view.
11
1 Placeholder
The Message view, which appears in the bottom portion of the workspace, displays a log
of messages. Each message consists of the following four parts:
Status bar
The status bar, which is located at the bottom of the RSNetWorx for DeviceNet main
window, provides information about the status of the software.
The left portion of the status bar displays informational messages about the operation of
RSNetWorx for DeviceNet software. For example when you highlight a device in the
configuration view, a brief description of that device appears on the status bar.
The right portion of the status bar displays the following:
Offline
Online - Not Browsing
Starting Browse...
Browsing - Node address or Node, slot address
Quick Start steps

This section walks you through the tasks you will need to perform in order to use
RSNetWorx for DeviceNet software. To remain focused on the high-level nature of each
task and the flow of these tasks, the following steps do not include the step-by-step
procedure for accomplishing each task. When you are ready to use RSNetWorx for
DeviceNet software, you should follow the detailed procedures found in the Quick Start,
which is located in the RSNetWorx for DeviceNet online help.
To access the online quick start, select Help > Quick Start from the menu bar on the
RSNetWorx for DeviceNet window. To view information about any control in the
RSNetWorx for DeviceNet software, remember to use the Whats This? help (available by
positioning the cursor over a control and right-clicking the mouse).
12
Online mode
Before you can add a device to a DeviceNet network, it may need to be commissioned.
This means that the node address and the data rate must be programmed into the device.
Node commissioning, which is also called device commissioning, is the process of
assigning a node address and a data rate to a device for use on a DeviceNet network. The
node address and data rate are referred to as the network parameters.
Most DeviceNet devices are factory commissioned with default values per the DeviceNet
specification. Usually, the node address is set to 63 and the data rate is set to 125K baud.
As long as the factory default parameters do not conflict with those of other devices
already on the network, you can connect the new device to the network and then use the
Node Commissioning tool within the RSNetWorx for DeviceNet software to change the
node address and data rate. If the data rate conflicts, use a separate network to commission
the device or a local connection between the device and the PC.
Some devices do not support software-based node commissioning. For those devices, the
product will have some alternative way (for example, thumbwheel switches) to set the
address and data rate. See the specific devices documentation for more information.
Step 1 Create a new configuration and browse for an online network
The first step in using RSNetWorx for DeviceNet in the online mode is to create a new
DeviceNet configuration (by selecting File > New). Once you create the configuration, an
empty network displays in the Configuration view.
Next, go online and select a communications driver using the RSWho browse utility. A
graphical representation of the network appears in the Configuration view. If you would
like to see a tabular view of the information, select the Spreadsheet tab or the
Master/Slave tab.
At various times, you may want to save the work you have completed on your network
configuration. To save a configuration file (*.dnt), click File > Save.
Step 2 Upload and configure the online DeviceNet network

After creating your configuration and going online, you must upload the configuration of
each device and the entire DeviceNet network. Once your configuration has been
uploaded, you can then edit your network properties. Editing network properties includes
entering a network name and description.
13
1 Placeholder
Before you start
Step 3 Configure the DeviceNet devices

After uploading and configuring the entire DeviceNet network, you must configure the
devices on the network. To configure a device, select a device in the configuration view
and choose Device > Properties from the main menu. Configuring your devices consists
of tasks like:
configuring general device properties

editing and monitoring device parameters
In addition you can also view I/O message data and the contents of the EDS file.
As you configure each device, you may need to choose to upload from the device or
download to the device before changing its configuration. This reconciliation process
keeps the online device and the current configuration synchronized. When you are in
online mode, the configuration displayed for the device represents the configuration in the
online device.
Step 4 Configure the DeviceNet scanner
When you have completed your device configuration(s), you can then configure the
scanners on your DeviceNet network. To configure a scanner, select a scanner in the
configuration view and choose Device > Properties from the main menu. Configuring
your scanner includes advanced tasks like configuring a scanlist (a list of the devices that
you want the scanner to scan), and mapping device input and output data. In addition, you
may also want to configure general device properties, specify module parameters
(including scan-time related items), or view a summary of the scanner configuration.
Step 5 Save your network configuration
The final step is to save your DeviceNet configuration information to a file. To save your
configuration file (*.dnt), select File > Save. Your DeviceNet devices are now configured
and ready to use.
You can use the RSNetWorx for DeviceNet software to further customize your DeviceNet
configuration. For example, you can re-assign node addresses, modify a devices
configuration, etc. And, when you are not using these applications to configure your
network, you can use RSNetWorx for DeviceNet software to monitor and troubleshoot the
devices on your network. For information on how to accomplish these tasks, see the
comprehensive online help.
Step 6 - Diagnose and troubleshoot your online network
Once you save your configuration, you can diagnose the network and determine the status
of all of the devices on that network. If any of the devices are exhibiting diagnostics
problems, you can troubleshoot those devices and return your network to proper operating
condition.
14
Step 7 - Schedule network diagnostics
Offline mode
Step 1 Create a new configuration and describe your network topology
The first step in using RSNetWorx for DeviceNet in the offline mode is to create a new
DeviceNet configuration (by selecting File > New). Once you create the configuration, an
empty network displays in the Configuration view.
Next, describe your network topology by dragging a device or scanner from the Hardware
view and dropping it in the network configuration. Repeat this process until you have
defined your entire DeviceNet network in the software. If you would like to see a tabular
view of the information, select the Spreadsheet tab or the Master/Slave tab.
At various times, you may want to save the work you have completed on your network
configuration. To save a configuration file (*.dnt), click File > Save.
Step 2 Configure the DeviceNet network

After creating your configuration, you can edit your network properties. Editing network
properties includes entering a network name and description.
15
1 Placeholder
After diagnosing and troubleshooting your online network, you can schedule diagnostics
to occur for each network that has an associated offline configuration file (*.dnt)
developed in RSNetWorx, allowing you to support an unattended, background mode of
diagnostic operation. Further, via the RSNetWorx MD Service Monitor, you can start,
stop, and establish the startup mode for each network diagnostic schedule that you have
configured.
Step 3 Configure the DeviceNet devices

After configuring your DeviceNet network, you can configure the devices on the network.
To configure a device, select a device in the configuration view and choose Device >
Properties from the main menu. Configuring your devices consists of tasks like:
configuring general device properties

editing and monitoring device parameters
In addition you can also view I/O message data and the contents of the EDS file.
Step 4 Configure the DeviceNet scanner
When you have completed your device configuration(s), you can then configure the
scanners on your DeviceNet network. Configuring your scanner includes advanced tasks
like configuring a scanlist (a list of the devices that you want the scanner to scan), and
mapping device input and output data. In addition, you may also want to configure
general device properties, specify module parameters (including scan-time related items),
or view a summary of the scanner configuration.
Step 5 Save your network configuration
The final step is to save your DeviceNet configuration information to a file. To save your
configuration file (*.dnt), select File > Save. Your DeviceNet devices are now configured
and ready to use.
You can use the RSNetWorx for DeviceNet software to further customize your DeviceNet
configuration. For example, you can re-assign node addresses, modify a devices
configuration, etc.
16
Installing and Starting RSNetWorx for

DeviceNet
This chapter explains how to install and start RSNetWorx for DeviceNet software. This
chapter includes information on the following:
system requirements
software compatibility
installation methods
installation procedure
starting procedure
troubleshooting
After installing the software, we recommend that you read the release notes located in the
online help. The release notes may contain more up-to-date information than was
available when this document was published. To view the release notes, start RSNetWorx
for DeviceNet, and then choose Help > Release Notes from the main menu.
Before you begin

Before you begin to install RSNetWorx for DeviceNet software, you should know about
some activation
Considerations when using RSLinx Classic

Before you can use RSNetWorx for DeviceNet software, you must install RSLinx Classic
software. To ensure that you are using the most current and compatible version of RSLinx
Classic, it is also included on the RSNetWorx for DeviceNet DVD.
If the installation program encounters an incompatible and/or previous version of RSLinx
Classic on your computer, it will notify you to install the version of RSLinx Classic included
on the RSNetWorx for DeviceNet DVD.
Activation
Rockwell Software uses a software key to implement copy protection for Windows-based
software products. Every software product has a unique key. Although, you can install the
software on any number of computers, you are only licensed to run the software on one
computer at a time. After you install the RSNetWorx software, the Setup program will
prompt you to activate your software. For more information about moving software keys,
copy protection, and software activation, refer to Appendix A in this guide.
17
2 Placeholder
System requirements
To run RSNetWorx for DeviceNet, your system must meet the following minimum
hardware and software requirements:
Hardware requirements
To run RSNetWorx for DeviceNet, your system must meet the following hardware
requirements:
an Intel Pentium 4 processor (2.4 GHz or faster)

1 GB of RAM
16 GB of maximum disk space (EDS files take 811 MB). These sizes are based on a
Microsoft FAT file system. A Microsoft NTFS file system will use much less space.
a DVD-ROM drive
True Color VGA graphics device with a minimum resolution of 1024 x 768
a mouse or other Windows compatible pointing device is recommended
If you will be using a 1784-PCIDS adapter card, it must have version 1.08 or later
firmware and you will need to install version 1.10 or later of the PCIDS device driver
software. For further information about installing the 1784-PCIDS adapter card or device
driver, refer to the DeviceNet PCI Communication Interface Card Installation
Instructions, publication number 1784-5.31. Also, for more information about the
communications interfaces supported, refer to the online help.
Software requirements
To run RSNetWorx for DeviceNet, you require one of the following operating systems:
18
Windows 8.x
Windows 7 Professional with Service Pack 1 and Windows 7 Home Premium with
Service Pack 1
Windows Server 2012 Standard
Windows Server 2012 R2
Windows Server 2008 Standard with Service Pack 2
Windows Server 2008 R2 Standard with Service Pack 1
2 INSTALLING AND STARTING RSNETWORX FOR DEVICENET
Software Compatibility
FactoryTalk Activation Manager (version 3.62)

FactoryTalk Services Platform (version 2.80)
RSLinx Classic (version 3.80)
RSLogix 5 (version 8.00)
RSLogix 5000 (version 28.00)
It is recommended that you use all products from the same CPR release.
Installing RSNetWorx for DeviceNet

You can install one or more Rockwell Software products to a single personal computer.
Select the required Rockwell Software product and each required component for
installation.
While installing RSNetWorx for DeviceNet software, you will have the opportunity to specify
a directory. The suggested default directory is:
x:\Program Files\Rockwell Software\RSNetWorxII
where x is the drive where the operating system is installed.
We recommend that you use the default directory whenever possible.This subdirectory
contains all of the application files required to run the product.
In procedures that appear throughout this document, it is assumed that you used the
default name. If you did not use the default name, substitute the actual name you specified
for the default name shown.
To install RSNetWorx for DeviceNet software, perform the following steps:

1. Start your operating system if it does not start automatically.
2. Insert the RSNetWorx for DeviceNet DVD-ROM into the DVD-ROM drive.
If autorun is:
Then:
enabled
The Setup program starts automatically and the RSNetWorx for DeviceNet
opening screen appears. Proceed to step 3.
19
2 Placeholder
RSNetWorx for DeviceNet v25 is a component aligned to Studio 5000 Logix Designer
v28. RSNetWorx for DeviceNet has been tested with, and is compatible with the
following products:
disabled
Perform the following steps:

1. Click Start, and then click Run. The Run dialog box appears.
2. In the Open field, type x:\setup.exe, where x is the letter of the drive
containing the RSNetWorx for DeviceNet DVD-ROM.
3. Click OK. The RSNetWorx for DeviceNet selection dialog box appears.
4. In the Product Selection page, select RSNetWorx for DeviceNet checkbox, and Click
Next.
You can click View Release Notes for Selected Product to ensure your system meets
the minimum requirements, and to learn about new features included with this
version.
5. In the Customer Information page, enter the user name and organization, and click
Next.
6. In the License Agreement page, read the end-user license agreement, select I accept
the terms in the license agreement, and click Next.
7. In the Installation Location page, click Next. You can also click Change to select
another location.
8. In the Feature Selection page, select the approriate installation type and click Next.
9. In the Configuration Summary page, review the information. If the information is
correct, click Install to continue.
10. When the installation completes,
To activate RSNetWorx, select the Activate products check box.
To set up security in RSNetWorx, select Enable FactoryTalk Security and select

the FactoryTalk directory that will be used to authenticate and authorize user
access.
11. Click Finish to exit.
Installing a client copy from a dedicated server

As a client to a client-server installation, you can install one or more Rockwell Software
products from the dedicated server location to an end-user destination. To install the
RSNetWorx for DeviceNet software from the server, perform the following steps:
1. Map a network drive to the dedicated server location provided by your system
administrator. The system administrator must have copied the entire DVDcontents,
and provided only Read and Execute permissions of the files. Users installing the
software cannot have write access to the files.
20
2 INSTALLING AND STARTING RSNETWORX FOR DEVICENET
2. Double-click autorun.exe in the client installation directory.

2 Placeholder
3. See the Installing RSNetWorx for DeviceNet Software section in this chapter.
Updating an existing installation

Perform the following steps to update an existing installation to a newer version:
1. From the Start menu, select Settings > Control Panel.
2. To remove the existing installation, double-click the Add/Remove Programs icon,
select RSNetWorx for DeviceNet from the list, and click Add/Remove. Click OK to
close the Add/Remove Programs dialog box.
3. Insert the RSNetWorx for DeviceNet DVD-ROM into the DVD-ROM drive.
If autorun is: Then:
enabled
The installation program starts automatically and the selection

dialog box appears. Proceed to step 4.
disabled
Perform the following steps:

1. Click Start, and then click Run. The Run dialog box appears.
2. In the Open field, type x:\autorun, where x is the letter of the
drive containing the RSNetWorx for DeviceNet DVD-ROM.
3. Click OK. The selection dialog box appears.
4. Follow the instructions that appear on the screen. For more information, see the
Installing RSNetWorx for DeviceNet Software section in this chapter.
If activation was previously installed, it is not necessary to move the activation. If activation
was not previously installed, insert the Master disk into the 3.5-inch disk drive and follow
the instructions that appear on the screen. For more information on activation, see
Appendix A.
Starting RSNetWorx for DeviceNet software

To start RSNetWorx for DeviceNet software, click Start, and then select Programs >
Rockwell Software > RSNetWorx (folder) > RSNetWorx for DeviceNet (executable).
To create a desktop icon, click Start, and then select Programs > Rockwell Software >
RSNetWorx for DeviceNet shortcuts, and drag the RSNetWorx for DeviceNet shortcut
to the location of your choice.
We assume that you used the default names for the directory and program group. If you did
not use the default names, substitute the actual names that you specified for the default
names shown.
21
Troubleshooting installation
If RSNetWorx for DeviceNet does not start up or run properly, consider the following:
22
Do you have the correct version of RSLinx Classic installed? RSNetWorx for
DeviceNet requires RSLinx Lite 2.2 Service Pack 1 or later.
Does your computer have enough memory? Running RSNetWorx for DeviceNet
requires a minimum of 32 MB of RAM.
Have you reinstalled an earlier Service Pack, or removed a component, such as
DCOM, that RSNetWorx for DeviceNet requires?
Have you checked the RSNetWorx support on the web for troubleshooting
information? Go to http://www.rockwellautomation.com/support, click
Knowledgebase, and search for Tech Notes on RSNetWorx for DeviceNet.
Advanced Concepts
3 Placeholder
This chapter contains the following sections:
EDS-based devices
EDS library
DeviceNet node commissioning tool
Faulted Address Recovery wizard
Class Instance Editor
EDS-based devices
RSNetWorx for DeviceNet relies on an electronic data sheets (EDS) for configuring
devices. An electronic data sheet is an ASCII file that is created by the manufacturer and
supplied with the device.
As long as the EDS file for the device you want to configure is registered with the
RSNetWorx for DeviceNet software, you can configure its target connection
configuration (attributes) and how it will communicate with other devices on the
DeviceNet network. Although the procedure for configuring a device is basically the same
for all devices, each device will have a unique set of properties.
EDS library
The electronic data sheet (EDS) library is a collection of EDS files that have been
registered with RSNetWorx for DeviceNet. The EDS files, which are provided by the
device manufacturers, contain configuration and identification information for the
devices.
RSNetWorx for DeviceNet software can access only those devices that have been
registered. You must use the EDS Wizard for registering EDS files for unknown devices,
or if you have updated EDS files to install. To access the EDS Wizard, select Tools > EDS
Wizard.
23
Although you get a large number of electronic data sheet (EDS) files with the RSNetWorx
for DeviceNet software, there may be a time when you need to acquire/create additional
EDS files. The most common ways of getting these files are to:
obtain them on distribution diskettes that accompany the devices.

download them from DeviceNet sites on the world wide web. You can either select the
device in the network configuration, right-click the mouse and select Re-register
Device, and click Download EDS File in the EDS Wizard or access one of the
following world wide web sites from which EDS files are available:
http://www.ab.com/networks/eds (Allen-Bradley technical support site)
http://www.ab.com/drives/1305index.html (Allen-Bradley Standard Drive

Products site)
http://www.odva.org (Open DeviceNet Vendors Association site)

create the EDS file using the EDS Wizard.
DeviceNet node commissioning tool

The DeviceNet node commissioning tool lets you commission, that is, set the node
address and the data rate parameters of, devices that are either connected:
to a DeviceNet network, or
via a point-to-point connection.
Commissioning devices on a DeviceNet network

Before you can add any node to a live DeviceNet network, it must be commissioned. This
means that a node address and a data rate must be programmed into the device. Most
devices are preset with a node address, which is usually set to 63, and a data rate, which is
usually set to 125K baud. These default preset values will need to be changed to meet
your application needs. Once a device has been commissioned and attached to a network,
you can use the RSNetWorx for DeviceNet node commissioning tool to edit the node
address that was set previously.
Some devices do not permit software setting of the node address or data rate. Refer to the
device documentation for specific information.
Exercise caution while editing node addresses when on a network. When you apply a new
node address, it immediately overwrites the node address data in the device currently
specified. If you re-assign node addresses, first determine the order in which this needs to
be done so that all the devices will still have unique node addresses throughout the
address assigning process. If your scanner supports Automatic Device Replacement
(ADR), your system may automatically perform this commissioning.
24
Commissioning a device via a point-to-point connection

When the baud rate of a device does not match the DeviceNet network (for example,
when adding a new device [out of the box] or when moving a device from one DeviceNet
network to another) and the dip switches are not provided, it may be necessary to establish
a point-to-point connection to that device and prepare it for integration onto your existing
DeviceNet network. Using the Node Commissioning Tool, you can establish a point-topoint connection to a device and change the node address and/or the data rate parameters
to match your existing DeviceNet network.
You should not change the data rate of devices while they are connected to a network;
otherwise, erratic operation may result. We recommend that if you need to change the data
rate of a device, that you complete the following:
1. Remove it from the network.
2. Establish a point-to-point connection between the PC, which hosts the RSNetWorx for
DeviceNet software, and the target device.
3. Recommission the device.
4. Reconnect the device to the network.
Faulted Address Recovery Wizard

The Faulted Address Recovery wizard allows you to recover select faulted devices with
duplicate node addresses on your DeviceNet network. In addition, you can detect faulted
devices on your DeviceNet network and "flash" the LEDs on those devices to locate them
in your application.
The faulted address recovery function is not supported by all devices. For more
information, consult your hardware documentation or contact your hardware vendor.
The Faulted Address Recovery feature requires RSLinx 2.20, Service Pack 1 or later.
25
3 Placeholder
For example, if two of the devices on your network are a photoelectric sensor and a hand
controller and you accidentally change the node address of the hand controller to be the
same as that of the photoelectric sensor, then the hand controller will no longer have a
unique address, which means that it will not be able to communicate on the network. If
you cannot access a device, because you have used its node address for another device,
you will have to remove it from the network, recommission it, then reinstall it on the
network. For information on how to recover a faulted device, see the Faulted Address
Recovery wizard in this chapter.
3 ADVANCED CONCEPTS
Class Instance Editor

The Class Instance Editor is a tool that allows you to send data to, and read data from, a
DeviceNet device that is not otherwise configurable with RSNetWorx for DeviceNet.
Using the Class Instance Editor, you can enter raw data and download it to the device, or
read the data from the device.
We do not recommend configuring devices with the Class Instance Editor unless you are
instructed to do so by technical support personnel for the hardware product.
To use the editor, you will need to know the service code, class, instance, and attribute by
their appropriate hexadecimal codes within the device. This information may be available
on the printed data sheet accompanying the device.
For further information about configuring a device with the Class Instance Editor, contact
the manufacturer of the device. For more information on how to enter data into the Class
Instance Editor, contact Rockwell Software technical support.
26
Finding the Information You Need
4 Placeholder
Use this chapter to review the sources of additional information about RSNetWorx for
DeviceNet software. This chapter helps you to find what you need efficiently by
describing how to:
Use the online help

Access product manuals
Complete the product tutorial
Participate in Rockwell Software training courses
Contact Technical Support
Using the online help

RSNetWorx for DeviceNet online help provides general overview information,
comprehensive step-by-step procedures, and context-sensitive, dialog box control
definitions for working with all of the features in the software. To view online help while
running RSNetWorx for DeviceNet:
choose Contents from the Help menu on the RSNetWorx for DeviceNet main window
click Help on any RSNetWorx for DeviceNet dialog box or property page
position the cursor over any control with which you want help and right-click
press F1
click the Whats This? icon located in the toolbar or in the upper right corner of dialog
boxes, then click any control
27
Accessing help for a control or field

To display a definition for a control or a field, click the Whats This? icon in the upper
right corner of the dialog box, drag the cursor to the selected area, and then click to
display the definition. You can also right-click on a control to display the definition. In
this example, the Name control was selected.
Accessing help for error messages

The message view, which appears in the bottom portion of the workspace, displays a log
of messages. This view may contain informational, warning, and/or error messages.
To troubleshoot a particular message, you can select the message and press the F1 key or
right-click on the message and select Troubleshoot to access the online help.
28
4 Placeholder
For example, if you select the DNET:0001 error code shown here and press F1, the
browse operation has timed out help topic displays:
4 FINDING THE INFORMATION YOU NEED
From the message view, you can also select a message and choose View > Messages >
Troubleshoot to display online help for the message. You can also show, clear, copy,
and/or clear and hide messages by making the appropriate selection from the View >
Messages command on the main menu. The copy menu item copies the selected message
to the Windows clipboard so it can be pasted into other applications (for example, an email message).
29
Finding step-by-step procedures

To view a list of tasks related to the current task-based topic, move to the What do you
want to do? section at the bottom of the help window and select one of the listed tasks.
The contents pane of the help window is updated, displaying a step-by-step procedure for
completing the selected task.
For example, from the Configuring EDS-based devices topic, if you select Learn how to
configure EDS devices under the What do you want to do? section, the help topic that
describes how to configure an EDS-based device appears.
30
Finding definitions
Accessing the Product Manuals

You can gain immediate access to product documentation through the Product Manuals
feature in RSNetWorx for DeviceNet. Product Manuals include this Getting Results
Guide, as well as many reference guides, in an electronic book format. Select Help >
Product Manuals to access this documentation.
31
4 Placeholder
Within the RSNetWorx for DeviceNet help, blue text highlighted with an underline
indicates a pop-up definition or a link to a related topic. For example, in the DeviceNet
node commissioning tool help topic, node address is a pop-up definition. Click the link to
see the definition of a node address.
Tutorial
RSNetWorx for DeviceNet contains a product tutorial, which includes basic overview
information and specific tasks and examples for successfully working with the product.
This tutorial is available from Start > Programs > Rockwell Software > RSNetWorx >
RSNetWorx for DeviceNet Tutorial.
Training
One of the best ways to increase your proficiency at using Rockwell Software products is
to attend a Rockwell Software training program. Our training programs can help you
master the basics and show you how to unleash the full potential of our software.
We offer a wide range of training programs, from regularly scheduled classes conducted at
Rockwell Software facilities, to custom-tailored classes conducted at your enterprise. The
size of each class is kept small intentionally to maximize student engagement.
If you would like more information about our training programs, visit the Rockwell
Software site on the World Wide Web or contact the Rockwell Software Training
Coordinator. Our World Wide Web address and telephone numbers appear on the inside
front cover of this document.
For more information on Rockwell Software training, go to the Training Services web site:
http://www.rockwellautomation.com/services/training/
Technical support
If you cannot find answers to your questions in the Getting Results with RSNetWorx for
DeviceNet guide, the online help, or the Online Books documentation, you can call
Rockwell Software Technical Support at the numbers listed on the inside front cover of
this guide. You can also access the Rockwell Software Online Support Library and receive
information about Autofax Product Information System from the web site listed on the
inside front cover of this guide.
32
When you call

4 Placeholder
When you call, you should be at your computer and prepared to give the following
information:
product serial numbers

product version number
The product serial numbers and version number can be found in the software by
selecting Help > About RSNetWorx
hardware you are using
exact wording of any errors or messages that appeared on your screen
description of what happened and what you were doing when the problem occurred
description of how you attempted to solve the problem
For more information on Rockwell Software training, go to the Services & Support web
site: http://www.rockwellautomation.com/services/
33
34
Activation
A Placeholder
RSNetWorx for DeviceNet only supports FactoryTalk activation.

If you are a new user, you will need to activate your software using FactoryTalk
Activation because RSNetWorx no longer ships with a physical master disk for
activating software. For more information, read the Activate RSNetWorx with
FactoryTalk Activation section of this appendix.
Activate RSNetWorx with FactoryTalk Activation

RSNetWorx for DeviceNet supports the following types of activation:
Node-locked activation
This type of activation can be either locked to a particular piece of hardware, such as an
EtherNet card or a harddisk of a stand-alone computer, or to a hardware dongle.
Depending upon the kind of device (stand-alone computer or hardware dongle) you want
to activate, you can purchase either
Local node-locked activation: This kind of activation activates software only on a

single computer. If the activation file is copied to another computer, the software will
not run on that other computer, or
Mobile node-locked activation: This kind of activation is locked to hardware

dongle. A dongle is a security or copy protection device that must be connected to the
computer while the program runs. The activation files can be copied to multiple
computers, but the software activates only on the computer where the dongle is
connected.
Concurrent activation
This type of activation allows multiple computers across a network to use Rockwell
Software products at the same time. There are two kinds of concurrent activations:
Floating activations: activations that float from an activation server to any computer
that needs them.
Borrowed activations: activations that are retrieved from a server for a specific period
of time before expiring and returning automatically to the pool of available activations
on the server.
How to activate RSNetWorx

To activate your copy of RSNetWorx, perform the following steps:
35
1. Install the FactoryTalk Activation Client available from the Optional Steps screen of
the Install program.
2. Once FactoryTalk Activation Client is installed, it will load the FactoryTalk
Activation Wizard which will guide you through the steps of downloading the
activation from the Internet. You can download the activation to your stand-alone
computer or hardware dongle.
Finding more information about FactoryTalk Activation

For help with FactoryTalk Activation at any point, you can click:
the Help button on any FactoryTalk Activation Tool dialog or FactoryTalk Activation
Transfer Tool dialog
the Help link on the Rockwell Software Activation website:

http://licensing.software.rockwell.com
View How to Activate Rockwell Software Products on the Required Steps of the
Install program
If you cannot connect to the Internet, call Technical Support for help creating an
activation file from an e-mail or a fax.
Phone: 440-646-3434 in North America. Outside of North America, call your local
support organization.
Grace period
In RSNetWorx for DeviceNet v10.00.00 (CPR 9 Service Release 2) and later, the software
supports a seven day activation grace period when a valid activation is not found. During
grace period:
If RSNetWorx is started and an activation key is not present, the software shall enter
grace period and run with full functionality.
Once RSNetWorx has entered grace period, the software shall check for an activation
key every four hours. If the activation is not found, a message will be generated to
FactoryTalk Diagnostics.
RSNetWorx can be started an unlimited number of times while in grace period and be
able to run with full functionality. If the grace period ends and a valid activation has
not been found, RSNetWorx shall run in Demo mode.
While RSNetWorx is running, the software cannot change modes. RSNetWorx can
only change to Demo mode when the software is restarted and/or grace period has
already expired.
If RSNetWorx is unable to successfully obtain valid activations (for example, a network

failure occurs), the software will attempt run in grace period for up to seven days.
36
Some common questions

Following are some common problems that people encounter with activation and their
solutions.
MY
ACTIVATION FILES WERE DAMAGED.
WHAT
SHOULD
DO?
If you have lost the activation because the activation file is damaged, you need to reset
activation. Follow the Reset Codes instructions on the Rockwell Software Technical
Support web page, or call the technical support telephone number. The web page and
telephone number are both listed on the inside front cover of this guide.
I ACCIDENTALLY DELETED THE SOFTWARE DIRECTORY ON MY HARD
DO I NEED TO CALL ROCKWELL SOFTWARE FOR REPLACEMENT
ACTIVATION FILES?
DRIVE.
No. Deleting the program files does not delete your activation. The activation files are not
stored in the program directory; they are located in the root directory. Your activation files
will not be lost unless you format the hard drive, tamper with hidden files in the root
directory, or perform certain other hard drive operations (refer to the Protecting your
activation files section in this chapter for more information).
To get the software running again, simply reinstall the software, but do not move the
activation when given the opportunity.
Finding more information about activation

The online help (COPYPROT.HLP) provides more extensive information on activation
including subjects such as:
CHECKDRIVES. Specify which drives to search for activation
network activation. Move activation to a network server to allow multiple users access to
the activation
moving activation. See detailed instructions for moving activation
resetting activation. See detailed instructions for using the Reset utility to repair a
damaged activation file
37
A Placeholder
Systems attached to extensive networks can take quite a while to search for activation files
on all available drives. You can use the CHECKDRIVES environment variable to specify
and/or limit the drives your software checks for activation files and to specify the order in
which they are checked. Refer to the activation utilities online help file by selecting Help >
Copy Protection.
A ACTIVATION
troubleshooting. Look up error messages, get problem-solving suggestions

You can access online help:
38
from the Help button on one of the EvMove or Reset dialog boxes.
from RSNetWorx by selecting Help > Copy Protection from the main menu.
without running either RSNetWorx or the activation utilities. From the Windows Start
menu, select Programs > Rockwell Software > Utilities > Activation Help (if you
accepted the default directory location during installation).
Security
FactoryTalk Security is intended to improve the security of your automation system
by limiting access to those with a legitimate need. FactoryTalk Security authenticates user
identities and authorizes user requests to access a FactoryTalk-enabled system. These
security services are fully integrated into the FactoryTalk Directory and are included as
part of the FactoryTalk Services Platform that installs with many products.
For more information on how to use security services, refer to FactoryTalk Securitys
Online help.
How do I set up security in RSNetWorx?

RSNetWorx supports FactoryTalk Security. FactoryTalk Security is intended to
improve the security of your automation system by limiting access to those with a
legitimate need. FactoryTalk Security authenticates the identities of users and authorizes
user requests to access a FactoryTalk-enabled system against a set of defined user
accounts and access privileges held in the FactoryTalk Directory. For more information on
FactoryTalk Security, refer to the About FactoryTalk Security topic in RSNetWorx for
DeviceNet Online Help
Follow the steps below to set up security in RSNetWorx:
1. Install FactoryTalk Services Platform from RSNetWorx Optional Steps Install screen.
(Following the install, open the FactoryTalk Administration Console and configure
the FactoryTalk Directory that you want to use.)
2. Install RSNetWorx from RSNetWorx Required Steps Install screen.
For more information on FactoryTalk, FactoryTalk Automation Platform, FactoryTalk
Administration Console, and FactoryTalk Directory, refer to the Glossary.
39
B Placeholder
3. While running RSNetWorxs installation wizard, you will see the Enable Security and
Select a FactoryTalk Directory install screen. On this screen, select the Enable
security option. And then select the FactoryTalk directory (Network or Local) that
will be used to authenticate and authorize user access.
4. Click Next, and then click Install to continue the RSNetWorx installation.
5. When the install is complete, click Finish.
40
B SECURITY
What can I secure in RSNetWorx?
Securable action
Description
Access
The Access securable action allows you to perform actions

such as opening an offline project file for viewing, viewing
the properties of a device, etc.
Modify
The Modify securable action allows you to perform actions

such as creating a project file, making changes to a project
file, saving any pending edits, etc.
Note: To modify a project file, you need both Access (to open the
file) and Modify (to make changes) securable actions.
Go Online
The Go Online securable action allows you to download

information saved in a project file or upload information
into a project file, as well as browse to a device on the
network.
Note:
To download information saved in an existing project file, you
need Access (to open the file), Go Online (to go online to prepare
to download), and Modify (to download) securable actions.
To upload information into an existing project file, you need
Access (to open the file), Go Online (to go online to prepare to
upload), and Modify (to upload) securable actions.
To upload information into a new project file, you need Go
Online (to go online to upload) securable action.
41
B Placeholder
RSNetWorx implements FactoryTalk Security through three securable actions: Access,

Modify, and Go Online. These securable actions let you restrict user access to actions,
such as opening a project file, creating a new project file, making changes to a project file,
uploading or downloading to a device, browsing to a device from the network, viewing
the properties of a device, etc., in RSNetWorx.
To allow or deny user access to one or more of the above securable actions, you will need
to:
1. Start FactoryTalk Administration Console from Start > Programs > Rockwell
Software > FactoryTalk Administration Console. You will see the Log On to
FactoryTalk screen, as shown below.
2. Enter your username and password, and select the directory you want to log on to.
(The username and password were set when you set up an account during FactoryTalk
Directory configuration.)
Tips for choosing a directory:
42
Click Network to access Network (also called Distributed) applications on the

Network Directory Server.
Click Local to access Local (also called Stand-alone) applications on the Local
Directory. Local applications are always located on your local computer. You
cannot access local applications remotely.
If you cannot log on to a particular directory on your computer, it may be because

it has not yet been configured. For more information, refer to the Right
FactoryTalk Directory is not configured on this computer topic in FactoryTalk
help. You can launch FactoryTalk Help from FactoryTalk Administration Console.
4. Double-click the Feature Security file to launch the Feature Security Properties dialog
box.
5. In the Feature Security Properties dialog box, click the securable action you want to
grant the user access to.
6. In the Configure Securable Action dialog box, from the list of users, select the user
you want to grant access to, and click Add.
For more information on FactoryTalk and FactoryTalk Security, refer to RSNetWorx for DeviceNet
Online Help.
43
B Placeholder
3. In FactoryTalk Administration Console, click on the RSNetWorx folder (located

under System > Policies > Product Policies), to expand it. You will see the Feature
Security file.
B SECURITY
44
Glossary
Activation key Activation files contain a database of activation keys. Each key is
particular to a certain product and must be accessible on a local or remote drive for that
product to run.
DeviceNet network A topology for industrial automation networks.
FactoryTalk is a manufacturing information platform that integrates plant-wide control
systems and connects the enterprise with the production facility.
The FactoryTalk Automation Platform:
provides common services (such as diagnostic messages and access to real-time data)
and shares plant resources (such as tags and graphic displays) throughout a production
facility
allows defining plant-floor resources once, and then allows simultaneous access to
those resources across product boundaries
supports centralized security services
FactoryTalk Administration Console Part of the FactoryTalk Automation Platform,

FactoryTalk Administration Console is an optional, stand-alone tool that allows you to:
Create and configure application, area, and data server elements in the FactoryTalk
Directory.
Back up and restore an entire directory or an individual application.
Set up redundancy for OPC data servers.
Configure client computers to recognize the location of a FactoryTalk Directory

Server computer.
Configure options for routing and logging diagnostic messages.
View system-wide diagnostic messages.
45
C Welcome
Activation file A hidden, read-only, system file that activates a Rockwell Software
product. The software will run only if your system can find the correct activation file.
Configure system-wide policy settings.
Secure your FactoryTalk-enabled system with FactoryTalk Security services.
Run FactoryTalk Administration Console from the Windows Start menu: Start >
Programs > Rockwell Software > FactoryTalk Administration Console.
FactoryTalk Directory FactoryTalk Directory provides a central lookup service for
software products participating in a FactoryTalk-enabled automation system.
The FactoryTalk Automation Platform includes two separate directories: a Local
Directory and a Network Directory. Either directory, or both directories, can be
configured on the same computer. Project information, including security settings, cannot
be shared between a Local Directory and Network Directory, even if both directories are
configured on the same computer. Create and configure application, area, and data server
elements in the FactoryTalk Directory.
Local Directory all project information and participating software products are
located on a single computer, and the FactoryTalk-enabled system cannot be shared
across a network or accessed remotely.
Network Directory organizes project information from multiple software products

across multiple computers on a network.
Some FactoryTalk-enabled products require a Network directory, others require only a

Local directory, and some require that both directories be configured.
License Authorization to use a specified number of instances of software. A products
activation key contains a license for each copy of the software you have purchased. For
example, if you bought seven copies of RSLogix 5, then the RSLogix 5 key on the Master
Disk contains seven licenses of RSLogix 5. You can move the activation file for
RSLogix 5 to seven different computers.
Master disk This disk is supplied with the software. It contains a database of keys in
an activation file that enables the software to run. Be sure to store your Master Disk in a
safe place. If your activation file becomes damaged, the only way you can run your
software (until the activation is reset) is with your Master Disk.
RSNetWorx configuration A collection of user-defined parameters for networks.
46
Index
A
activation 35, 39
EVRSI
damaged 37
network 37
resetting 37
troubleshooting 38
FactoryTalk
activate 35
adding a device 8
autofax information system 32
autorun 19
B
benefits 1
browse 5
C
changing
interface displays 5
CHECKDRIVES 37
class instance editor 23
classes 32
clearing messages 29
closing RSNetWorx 4
configuration view 9
configuring
devices 23
context-sensitive help 6, 27
control area network 2
control definitions 27
control menu 4
copy protection 39
copying
devices 5, 6
messages 29
creating a network configuration 5, 6
Index
Symbols
customizing your configuration 14, 16

cutting devices 5, 6
D
data rate 2, 13
default parameters 13
definitions 31
deleting the software directory 38
design elements 3
device
adding 8
comparison states 7
configuring 23
mismatch 5
properties 5
device menu 5
DeviceNet window 3
diagnostics 7
adding/removing devices 5
selecting a fault 5
specifying options 5
starting 5
stopping 5
troubleshooting a fault 5
diagnostics menu 5
diagnostics view 10
document conventions iv
documentation set iii
dotted underline in help 31
downloading 5
drop line configuration 2
E
edit menu 5
EDS 23
library 23
Registry Wizard 5
EDS wizard 23
electronic book format iv, 31
email correspondence iv
error messages 11, 28
47
F
FactoryTalk 39, 45
FactoryTalk Activation 35
FactoryTalk Administration Console 42, 45
FactoryTalk Automation Platform 45
FactoryTalk Directory 39, 40, 46
FactoryTalk Security 39
FactoryTalk Services Platform 39
faulted address recovery wizard 23
favorites view 8
features 1
feedback iv
file menu 5
finding available networks 7
G
grace period 36
graphical network information 9
H
hardware devices
available 7
diagnostics 7
favorite 7
hardware requirements 18
hardware view 8
help menu 5
hiding messages 29
I
I/O
device management 2
informational messages 11
input device 2
installation 17
methods 19
intended audience iii
interface displays
changing 5
setting 5
L
listing hardware devices
48
available 7
favorites 7
Local Directory 46
M
maximizing windows 4
memory 22
menu bar 5
message codes 11
message view 11
messages
clearing 29
copying 29
hiding 29
minimizing windows 4
monitor devices 14
mouse 18
moving
windows 4
N
network 24
configuration 12
creating a configuration 5
opening a configuration 6
parameters 13
printing a configuration 5
properties 5
saving a configuration 5
Network Directory 46
network EVRSI activation 37
network menu 5
node 2
address 2, 13, 24
commissioning 13
commissioning tool 5, 13, 23
O
online 7
online help iii, 17, 27
Open DeviceNet Vendors Association 2
opening a network configuration 6
operating system compatibility 17
output device 2
Q
Quick Start 12
quick start
offline mode 15
online mode 13
R
RAM 18, 22
refresh tree and diagram 7
release notes iii, 17
repositioning the window 4
requirements
hardware 18
software 18
resetting EVRSI activation 37
restoring windows 4
RSLinx iii, 17, 22
RSNetworx icon 4
S
saving a network configuration 5, 6
Securable action 41
serial numbers 33
setting interface displays 5
shortcuts 6
sizing windows 4
software compatibility 17, 19
Index
parameters, network 13
pasting devices 5, 6
PDF files iv
pointing device 18
point-to-point connection 24
pop-up definition 31
printing a network configuration 5, 6
product
serial numbers 33
suppliers 2
version number 33
product manuals iii, 31
software requirements 18
starting RSNetWorx for DeviceNet 17, 21
status bar 12
step-by-step procedures 27, 30
support 32
support library 32
symbol legend 6, 7
system requirements 18, 19
INDEX
T
tasks 30
technical support 32
title bar 4
tool bar 6
tools menu 5
topology 2
troubleshooting 29
EVRSI activation 38
installation 22
trunk line configuration 2
tutorial iv, 32
U
updating an existing installation 21
uploading 5
V
version numbers 33
view menu 5
W
warning messages 11
Whats This? help 28
Windows
ME 18
Z
zoom selection
zoom in 7
zoom out 7
49
50

Rsnetworx

Uploaded by

Document Informationclick to expand document informationrsnetworx

Document Informationclick to expand document information

Copyright:

Available Formats

Rsnetworx

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Rsnetworx

Uploaded by

Copyright:

Available Formats

RSNetWorx

RSNETWORX FOR DEVICENET

DeviceNetnew.book Page ii Tuesday, September 22, 2015 4:05 PM

Customer Support Telephone 1.440.646.3434

2015 Rockwell Automation Technologies, Inc. All rights reserved.

Allen-Bradley, ControlLogix, FactoryTalk, PLC-2, PLC-3, PLC-5, Rockwell Automation,

Modified: September 22, 2015 16:04:01

DeviceNetnew.book Page iii Tuesday, September 22, 2015 4:05 PM

Purpose of this document

IBM compliant personal computers

DeviceNetnew.book Page iv Tuesday, September 22, 2015 4:05 PM

RSNETWORX FOR DEVICENET GETTING RESULTS GUIDE

DeviceNetnew.book Page v Tuesday, September 22, 2015 4:05 PM

Purpose of this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

1 Welcome to RSNetWorx for DeviceNet

2 Installing and Starting RSNetWorx for DeviceNet

DeviceNetnew.book Page vi Tuesday, September 22, 2015 4:05 PM

RSNETWORX FOR DEVICENET GETTING RESULTS GUIDE

Installing a client copy from a dedicated server . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Finding the Information You Need

How do I set up security in RSNetWorx? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

DeviceNetnew.book Page vii Tuesday, September 22, 2015 4:05 PM

DeviceNetnew.book Page viii Tuesday, September 22, 2015 4:05 PM

RSNETWORX FOR DEVICENET GETTING RESULTS GUIDE

DeviceNetnew.book Page 1 Tuesday, September 22, 2015 4:05 PM

Welcome to RSNetWorx for DeviceNet

Features and benefits

Support for SmartGuard EIP hardware.

DeviceNetnew.book Page 2 Tuesday, September 22, 2015 4:05 PM

RSNETWORX FOR DEVICENET GETTING RESULTS GUIDE

Understanding DeviceNet concepts

DeviceNetnew.book Page 3 Tuesday, September 22, 2015 4:05 PM

1 WELCOME TO RSNETWORX FOR DEVICENET

Exploring RSNetWorx for DeviceNet

DeviceNetnew.book Page 4 Tuesday, September 22, 2015 4:05 PM

RSNETWORX FOR DEVICENET GETTING RESULTS GUIDE

DeviceNetnew.book Page 5 Tuesday, September 22, 2015 4:05 PM

1 WELCOME TO RSNETWORX FOR DEVICENET

Each menu contains options for performing the following tasks:

Create, print, and save a network configuration, or exit RSNetWorx for

Choose browsing options, upload or download network information, view

Upload or download device information, resolve device mismatches, view

DeviceNetnew.book Page 6 Tuesday, September 22, 2015 4:05 PM

RSNETWORX FOR DEVICENET GETTING RESULTS GUIDE

File > New

Creates a new network configuration.

File > Open

Opens an existing network configuration. The arrow to the

File > Save

Saves the current network configuration.

File > Print

Prints the current network configuration.

Edit > Cut

Cuts the selected device from the network configuration and

Edit > Copy

Copies the selected device to the clipboard.

Edit > Paste