Manual Multisim 2001 (Ingles)

multiSIM 7
Simulation & Capture
Getting Started & Tutorial Guide
multiSIM and Electronics Workbench copyright 1989, 1992-2003

Interactive Image Technologies Ltd. All rights reserved.
All other brand or product names are trademarks or registered trademarks of their respective companies or
organizations.
MSM7-E-1786 R.1.
2003 Interactive Image Technologies Ltd. All rights reserved. Published May 2003.
Printed in Canada.
Preface
Congratulations on choosing Multisim 7 from Electronics Workbench. We are confident that it will deliver
years of increased productivity and superior designs.
Electronics Workbench is the worlds leading supplier of circuit design tools. Our products are used by more
customers than those of any other EDA vendor, so we are sure you will be pleased with the value delivered
by Multisim 7, and by any other Electronics Workbench products you may select.
Documentation Conventions
When Multisim 7 manuals refer to a toolbar button, an image of the button appears in the left column.
The manuals show circuits in black and white, although Multisim 7 is configured to use color by default.
(You can change the color scheme.)
When you see the icon in the left column, the functionality described is only available in certain versions of
Multisim 7, or to users who have purchased optional modules.
Multisim 7 manuals use the convention Menu/Item to indicate menu commands. For example, File/Open
means choose the Open command from the File menu.
Multisim 7 manuals use the convention of an arrow () to indicate the start of procedural information.
Multisim 7 manuals use the construction CTRL-KEY and ALT-KEY to indicate when you need to hold down
the Ctrl or Alt key on your keyboard and press another key.
The Multisim 7 Documentation Set

Multisim 7 documentation consists of this Getting Started and Tutorial manual, a User Guide, and on-line
help. All Multisim 7 users receive PDF versions of the Getting Started and Tutorial manual, the Component
Reference Guide and the User Guide. Depending on your version of Multisim 7, you may also receive a
printed version of the manuals.
Getting Started and Tutorial

The Getting Started and Tutorial manual introduces you to the Multisim 7 interface. It also offers an
introductory tutorial that takes you through the stages of circuit design, simulation, analysis and reporting.
User Guide
The User Guide describes Multisim 7 and its many functions in detail. The manual is organized based on the
stages of circuit design, and explains all aspects of using Multisim 7, in detail.
On-Line Help
Multisim 7 offers a full help file system to support your use of the product. Choose Help/Multisim Help to
display the help file that explains the Multisim 7 program in detail, or choose Help/Multisim Reference to
display the help file that contains reference material (from the appendices) such as details on all the
components families provided with Multisim 7. Both are standard Windows help files, offering a table of
contents and index.
In addition, you can display context-sensitive help by pressing F1 from any command or window, or by
clicking the Help button on any dialog box that offers it.
Adobe PDF Files

Both the Getting Started and Tutorial manual and the full User Guide, including appendices, are provided
on the Multisim 7 CD as Adobe PDF files and are accessible from the Multisim 7 program folder on the
Windows Start menu. To open PDF files, you will need Adobes free Acrobat Reader program, available for
download at www.adobe.com.
License Agreement
Please read this license carefully before installing and using the software contained in this package. By
installing and using the software, you are agreeing to be bound by the terms of this license. If you do not
agree to the terms of this license, simply return the unused software within thirty days to the place where you
obtained it and your money will be refunded.
1. Copyright. The software in this package is copyright Interactive Image Technologies Ltd.(IIT) the parent
company and owner of Electronics Workbench. The software is licensed for use only on the terms set forth
herein.
Single User Version. This Agreement permits you to install one copy of the software, which is licensed as a
single product. The software is installed on a computer when it is loaded into the hard drive or any other
storage device of that computer. You must pay for additional copies if you wish to install the software on more
than one computer at the same time or on a network. Certain exceptions to this policy exist in specific
circumstances. Please contact Electronics Workbench for details.
Multi-Station Standalone and Non-Floating Network Version. This multi-station license allows you to
install this software on the number of stations specified below. Each station shall consist of only one computer
with only one user at a time. If your multi-station version is to be used in a non-floating network environment,
each computer connected to that network from which this software can be run shall be considered one
station. If your multi-station version is to be used in an environment where the software is not accessed using
a network (i.e. standalone configuration), each computer shall be considered one station. For any
combination of non-floating and standalone stations, the respective methods of counting (as explained
above) shall apply and be totaled. The total number of stations your particular multi-station license is
restricted to is ______.
Floating Network Version. This floating network license allows you to install this software on a network.
Each station shall consist of only one computer with only one user at a time. The number of users restricted
by this license is determined by the total number of concurrent users running the software from the network at
the same time. The total number of concurrent users your particular floating network license is restricted to is
______.
2. Limited Warranty. IIT warrants that under normal use for a period of thirty (30) days from the date of
delivery that: (a) the media on which the software is furnished will be free from defects in the material and
workmanship; and (b) the software will operate substantially as described in the User's Guide
(documentation). In order to make a claim under this warranty you must call IIT for authorization to return any
defective item during the warranty period. If you return merchandise to IIT, you must insure the defective item
being returned because IIT does not assume the risk of loss or damage while in transit.
Upon return of a defective item, IIT shall, upon verification of the defect or error, at IIT's option, either repair or
replace the defective copy or refund the amount paid for the license. If IIT elects to provide a refund, upon the
date you receive notice of such election, this license shall terminate and you must comply with the provisions
set out below.
You must assume full responsibility for the selection of this software to achieve your intended purposes, for
the proper installation and use of the software and for verifying the results obtained from use of the software.
IIT does not warrant in any way that the functions contained in the software will meet your requirements, that
the software is fit for any particular purpose or that the operations of the software will be uninterrupted and
error-free.
3. Term. The License granted in this agreement is effective until termination. Your misuse shall automatically
terminate this license if you breach any of its terms and conditions. Upon termination, you shall return all
media containing the software and all documentation to IIT and destroy any copies of the software or any
portions of it which have not been returned to IIT, including copies resident in computer memory.
4. Copies, Modification or Merger. You shall not copy or modify all or any portion of the software or
documentation or merge it into another software program. Copies shall include, without limitation, any
complete or partial duplications on any media, adaptations, translations, compilations, partial copies within
modifications, mergers with other material from whatever source, and updated works. You shall use your best
efforts to prevent any unauthorized copying of the software.
You shall not make any change or modification to any of the executable files, nor shall you reverse engineer,
de-compile or disassemble the software or any portion of it, or otherwise attempt to determine the underlying
source code of the software or permit any such actions.
5. Disclaimer/Limitation of Liability. IIT expressly disclaims all other warranties, whether oral or written,
express or implied, including without limitation warranties of merchantability or fitness for a particular
purpose. All warranties shall terminate thirty days from date of delivery of the software to you.
Your exclusive remedy and IIT's entire liability arising from or in connection with the software, the software
documentation, and/or this license (including without limitation for breach of warranty) shall be, at IIT's option,
the repair or replacement of the media on which the software is supplied or refund of license fee.
In no event shall IIT's total liability for any damages, direct or indirect, in connection with the software, the
software documentation, and/or this license exceed the license fees paid for your right to use this copy of the
software, whether such liability arises from any claim based upon contract, warrants, tort or otherwise. In no
event shall IIT or its partners be liable for any loss of profit or any other commercial damage, including but not
limited to special, incidental, consequential or other damages, resulting from or in any way connected with the
use of this software and including but not limited to any damages resulting from the use of the software for
any special or high-risk applications such as those relating to or involving nuclear designs, medical devices
and other critical or potentially dangerous applications.
IIT specifically disclaims any other warranties, expressed or implied, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose.
Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to
you. In that event, any implied warranties are limited in duration to thirty (30) days from the date of delivery of
the software. This warranty gives you specific legal rights. You may have other rights, which vary from
jurisdiction to jurisdiction.
No action for any breach of warranty shall be commenced more than one year following the expiration of such
warranty.
6. General. You acknowledge that you have read this agreement, understand it and agree to be bound by its
terms and conditions. You further agree that it is the complete and exclusive statement of the agreement
between you and IIT and supersedes any proposal or prior agreement or any other communications between
IIT and you relating to the use of the software.
If any provision of this Agreement is unenforceable, all others shall remain in effect. This Agreement shall be
governed by the internal laws of the Province of Ontario and Canada, including Canadian copyright laws. The
exclusive venue in the event of any suit, proceeding or claim brought by you, and at our option, any suit,
proceeding or claim brought by IIT, shall be in the Courts located in Metropolitan Toronto, Ontario. If you have
any questions regarding this Agreement, you may contact IIT by writing to us at the address set out below:
INTERACTIVE IMAGE TECHNOLOGIES LTD.
111 Peter Street, Suite 801 Toronto, Ontario M5V 2H1 Tel: (416) 977-5550
Fax: (416) 977-1818 e-mail: ewb@electronicsworkbench.com
Internet: www.electronicsworkbench.com
Table of Contents
1. Introduction
1.1
About this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.2
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.3
What is Multisim 7?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.4
About Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
1.5
Installing Multisim 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
1.6
Installing Feature Codes for Previously Installed Versions of Multisim 7 . . . . . . . . . 1-10
1.7
Uninstalling Multisim 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
1.8
How to Reach Us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
1.9
Introduction to the Multisim 7 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
1.10 Configuring Multisim 7 Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
2. Building a Circuit
2.1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.2
Starting Your Circuit File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
2.3
Placing Components in the Circuit Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
2.4
Changing the Label and Color of Individual Components and Nodes . . . . . . . . . . . . 2-9
2.5
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
2.6
Using the Spreadsheet View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
2.7
Adding a Title Block to the Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15
2.8
Adding Text to the Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
2.9
Adding Graphic Annotation to the Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
2.10 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Multisim 7 Getting Started and Tutorial Guide
3. Editing a Component
3.1
Introduction to Component Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
3.2
Editing a Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2
3.3
Editing a Symbol Using In-Place Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3
3.4
Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3
4. Adding Instruments to Your Circuit

4.1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
4.2
Adding and Connecting Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
4.3
Configuring Instrument Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
4.4
Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
5. Simulating Your Circuit

5.1
Simulating your Circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
5.2
Viewing Simulation Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
5.3
Using the Dynamic Measurement Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3
5.4
Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3
6. Performing Analyses on Your Circuit
ii
6.1
The Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
6.2
About Transient Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
6.3
Running the Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
6.4
Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-5
Electronics Workbench
7. Generating a Report
7.1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
7.2
Creating and Printing a BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
7.3
Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
iii
iv
Introduction
Chapter
1
Introduction
1.1
About this Chapter

This chapter introduces you to this manual and to Multisim 7 itself. It also explains how to
install the full product and Feature Codes for optional modules.
1.2
About this Manual

This manual is written for all Multisim 7 users. It provides an overview of some of the main
Multisim 7 functions, using a tutorial approach where you are led through the steps of
building, simulating, analyzing and reporting on a basic circuit. The majority of the functions
described in this manual are available to all Multisim 7 users, regardless of their edition of the
product. Where the functionality described is available only in some editions of Multisim 7,
this is indicated by the presence of this symbol in the margin.
This manual assumes that you are familiar with Windows applications and know how, for
example, to choose a menu from a command, use the mouse to select an item, and enable/
disable an option. If you are new to Windows, see your Windows documentation for help.
1.3
What is Multisim 7?
Multisim 7 is a complete system design tool that offers a very large component database,
schematic entry, full analog/digital SPICE simulation, co-simulation with optional HDL
product, RF capabilities, Postprocessing features and seamless transfer to PCB layout
packages such as Ultiboard from Electronics Workbench. It offers a single, easy-to-use
graphical interface for all your design needs.
Multisim 7 provides all the advanced functionality you need to take designs from
specification to production. And because the program tightly integrates schematic capture,
simulation, and programmable logic, you can design with confidence, knowing that you are
1-1
Introduction
Introduction
free from the integration issues that often arise when exchanging data between applications
from different vendors.
1.4
About Installation
1.4.1
Installation Requirements
To successfully install Multisim 7, you may need up to 50 MB of hard disk space, depending
on which edition you have purchased. You also need, as a minimum, the following system
requirements:
1.4.2
Windows 98/NT 4/2000/XP

Pentium II+
64 MB RAM (128MB recommended)
CD-ROM drive
800 x 600 minimum screen resolution
Installation Types
Multisim 7 has two types of installation: Single User Version and Site License Version.
Single User Version. If you are installing Multisim 7 on a single computer that is not
connected to another computer, you are installing a Single User Version. For details on the
installation process see 1.5.1.1 Installing the Single User Version on page 1-3.
Site License Version. If you are installing Multisim 7 on a computer that is intended to be
used in a network, or on several standalone computers, you are installing a Site License
Version. Site License Versions are available in three types: Multi-Station Standalone
Installation, Network Installation, and Combination Multi-Station and Network Installation.
Multi-Station Standalone Installation. This installation is used if you are installing
Multisim 7 on more than one computer where the computers are not connected to one
another through a network. You can install Multisim 7 on each of the computers separately
using one copy of the program. For specific details on the number of stations allowed to be
installed, please see the Site License Version section of the License Agreement at the front
of this book. For details on this installation process see 1.5.2.1 Multi-Station Standalone
Installation on page 1-5.
Network Installation. This installation is used if you are installing Multisim 7 on a
network and the number of concurrent users, not the number of computers connected to
the network, is being counted. This is called a floating license. For specific details on the
1-2
number of stations allowed to be installed, please see the Site License Version section of
the License Agreement at the front of this book. For details on this installation process see
1.5.2.2 Network Installation on page 1-7.
Combination Multi-Station Standalone and Network Installation. This installation is
used if you are installing Multisim 7 on a number of standalone machines and on a
network environment. You can install Multisim 7 on each of the computers separately
using one copy of the program. With the same copy, you can then install the software on
the network. For special details on the number of stations allowed to be installed, please
see the Site License Version section of the License Agreement at the front of this book.
For details on this installation process see 1.5.2.3 Combination Multi-Station Standalone
and Network Installation on page 1-10.
1.5
Installing Multisim 7
1.5.1
Single User Version

1.5.1.1 Installing the Single User Version
The CD-ROM you received in your Multisim 7 package is self-starting. Follow the directions
below and on the screen during the installation process.
To install Multisim 7:
1. Copy your serial number (2 letters and 18 numbers) and Feature Code(s) in the spaces
below. You will find these numbers on the front of the CD-ROM package.
Serial number __________________________________________________________
Feature code ___________________________________________________________
Note The Feature Code is not the same as your serial number. Only users who have purchased additional features with Multisim 7 receive a Feature Code.
2. Exit all Windows applications prior to continuing.
3. Insert the Multisim 7 CD into your CD-ROM drive. When the Welcome screen appears,
read it. Click Next to continue.
4. Read the License Agreement, which can also be found in the front of this manual. To
accept the terms of the agreement, and to continue to the next screen, click Yes. If you do
not accept the terms of the agreement, click No and the Multisim 7 installation will be
terminated.
5. Enter your name, company and serial number (recorded above). Click Next to continue.
1-3
Introduction
Introduction
Introduction
6. If you did not receive a Feature Code with Multisim 7, this step is not required. Click Next
to continue.
If you purchased optional modules with Multisim 7, you will also have received a Feature
Code for each module. Enter the first Feature Code and click Next. A new blank field
appears. Continue entering the provided Feature Codes and clicking Next until you have
entered all the Feature Codes you need. Leave the last field empty and click Next.
7. Select the location in which you want to install Multisim 7. Choose the default folder or
click Browse to select a different location or to enter your own folder name. Click Next to
continue.
8. Users upgrading from Multisim 2001 will be prompted to import and convert earlier
versions of the Corporate and User Databases. Choose Yes or No. If you choose not to
proceed with the conversion at this time you may convert later from within Multisim.
9. Setup will create the program folder. Click Next to continue.
Multisim 7 will finish being installed. If for any reason you wish to stop the installation,
click Cancel and the installation of Multisim 7 will be terminated.
10. If upgrade users elected to import and convert their Corporate and User Databases and
duplicate component names are detected, the Duplicate Component Name dialog box will
appear. Select the desired option:
Auto-Rename Import and automatically rename the duplicate components.
Overwrite Replace the Multisim 7 components with Multisim 2001 components.
Ignore Do not import Multisim 2001 components with duplicate names.
11. If necessary, you will be prompted to re-boot your computer after installation.
1.5.1.2 Getting the Release Code for the Single User

Version
When you run Multisim 7, the splash screen will prompt you for a Release Code. The screen
indicates that a grace period of 15 days is provided starting on the day of installation. Each
day the grace period will decrease by one day. When the grace period reaches the 16th day,
Multisim 7 will not run until the Release Code is provided. Electronics Workbench strongly
recommends that you obtain your Release Code as soon as possible after you have installed
Multisim 7.
To obtain your Release Code, you must have your serial number and signature code available
(these are both displayed on the splash screen). Contact Electronics Workbench via our web
site at www. electronicsworkbench.com and select Product Registration, or call our Customer
Service number at 1-800-263-5552. Customers outside North America can also contact their
local distributor.
1-4
To enter the Release Code:

1. At the splash screen, click Enter Release Code. This enables the text box to be active.
2. Enter the Release Code number and click Accept to continue.
1.5.2
Site License Version

Site License Versions are available in three types: Multi-Station Standalone Installation,
Network Installation, and Combination Multi-Station and Network Installation.
1.5.2.1 Multi-Station Standalone Installation

Installing the Multi-Station Standalone Installation
below and on the screen during the installation process. Your license allows you to install the
software on the number of computers indicated in the Site License Version section of the
License Agreement at the front of this book.
Copy your serial number (2 letters and 18 numbers) in the space below. You will find this
number on the front of the CD-ROM package.
Serial number __________________________________________________________
To install Multisim 7, follow these instructions for each computer on which you are licensed
to install the software:
1. Exit all Windows applications.
3. Read the License Agreement, which can also be found in the front of this manual. To
accept the terms of the agreement, and to continue to the next screen, click Yes. If you do
not accept the terms of the agreement, click No and the Multisim 7 installation will be
terminated.
4. Enter your name, company and serial number (recorded above). Click Next to continue.
5. If you did not receive any Feature Codes, this step is not required. Click Next to continue
and go to step 7.
Feature Codes are used to install add-on modules and to release network seats for Network
Installations. Locate the Features Code(s), on the front of the CD-ROM package, that are
for add-on modules.
Copy your Feature Code for add-on modules in the space below.
Feature code for add-on modules: ___________________________________________
1-5
Introduction
Introduction
Introduction
Note Do not use the Feature Code for Network Seats in your Multi-Station Standalone
Installation. This Feature Code is intended for use in installing the Network portion of
a Combination Multi-Station Standalone and Network Installation.
6. In the installation window, enter the first Feature Code for add-on modules and click Next.
A new blank field appears. Continue entering the provided Feature Codes for add-one
modules and clicking Next until you have entered all the Feature Codes you need for addon modules. Leave the last field empty and click Next.
7. Select the Destination location in which you want to install Multisim 7. Choose the default
folder or click Browse to select a different location or to enter your own folder name. Click
Next to continue.
versions of the Corporate and User Database. Choose Yes or No. If you choose not to
9. Setup will create the program folder. Click Next to continue.
Multisim 7 will now finish being installed. If for any reason you wish to stop the
installation, click Cancel and the installation of Multisim 7 will be terminated.
10.If upgrade users elected to import and convert their Corporate and User Databases and
12. Repeat the installation for each workstation.
The Site License Version section of the License Agreement at the front of this identifies the
total number of stations to which your particular multi-station license is restricted. This is
controlled by the software.
Getting the Release Code for the Multi-Station Standalone

Installation
You will notice when you run Multisim 7 that the splash screen will prompt you for a Release
Code. The screen indicates that a grace period of 15 days is provided starting on the day of
installation. Each day the grace period will decrease by one day. When the grace period
reaches the 16th day, Multisim 7 will not run until the Release Code is provided. Electronics
Workbench strongly recommends that you obtain your Release Code as soon as possible after
you have installed Multisim 7.
Note The Release Code will be the same for each workstation.
1-6
To obtain your Release Code, you must have your serial number and signature code available
(these are displayed on the splash screen). Contact Electronics Workbench via our web site at
www. electronicsworkbench.com and select Product Registration, or call our Customer
Service number at 1-800-263-5552. Customers outside North America can also contact their
local distributor.
To enter the Release Code, on each computer for which you installed Multisim 7:
1. At the splash screen, click Enter Release Code. This enables the text box to be active.
2. Enter the Release Code number and click Accept to continue.
3. Perform steps 1 and 2 for each workstation.
1.5.2.2 Network Installation

Installing the Network Installation
below and on the computer screen during the installation process.
1. Copy your serial number (2 letters and 18 numbers) and Feature Code(s) in the spaces
provided. These numbers are located on the CD-ROM package.
Serial number __________________________________________________________
Feature code for Network Seats ______________________________________
Feature code(s) for add-on products ___________________________________________
Note A Feature Code is not the same as your serial number. The network installation
includes a Feature Code for unlocking and monitoring the number of network seats
your license includes. If you have purchased add-on products with Multisim 7, you
will also receive Feature Code(s) for each of the add-on products.
To install Multisim 7:
1. Logon with administrator privileges.
2. Exit all Windows applications prior to continuing.
4. Read the License Agreement. To accept the terms of the agreement, and to continue on to
the next screen click Yes. If you do not accept the terms of the agreement, click No and the
Multisim 7 installation will be terminated.
5. Enter your name, company and serial number. Click Next to continue.
6. Enter the first Feature Code (you can enter multiple Feature Codes in any order you like).
Click Next, to continue. A new blank field appears. Continue entering the provided
1-7
Introduction
Introduction
Introduction
Feature Codes and clicking Next until you have entered all the Feature Codes you
received. Leave the last field empty and click Next.
7. Select the network drive/location in which you want to install Multisim 7. Click the
Browse button to select a different location or enter your own folder name. Click Next to
continue.
Note You must install Multisim 7 in a location on the network drive that is accessible to all
workstations running Multisim 7.
versions of the Corporate and User Database. Choose Yes or No. If you choose not to
9. The Setup routine will create the program folder. Click Next to continue.
If for any reason you wish to stop the installation, click Cancel and the installation of
Multisim 7 will be terminated.
10.If upgrade users elected to import and convert their Corporate and User Databases and
To configure Multisim 7 on each workstation:
1. Logon with administrator privileges.
2. Using Windows Explorer, navigate to the Multisim 7 folder on the network drive.
3. Double-click on the Multisim executable file, Multisim.exe.
4. The setup routine will now configure the workstation.
Restricting Write Privileges

Access to the Multisim 7 directories should be restricted by placing permissions on various
directories. Follow the instructions below to place the appropriate permissions.
Windows NT Client/Server Install
In the main installation directory (N:\Multisim 7, where N: is the network drive where
Multisim 7 is installed, and Multisim 7 is the name of the folder specified at installation),
share the directory with share permissions for Everyone set to Full Control.
1-8
Security on the Multisim 7 directory should be:

Administrator
Full Control
User
(R)ead E(X)ecute (W)rite
Set up the directory attributes for subdirectories as follows:

Directory
Attributes - User
Library
(R)ead (W)rite E(X)ecute
Lock
Samples
(R)ead E(X)ecute
Ulticap
Ulticap\Sch
All directories not listed above should have (R)ead E(X)ecute permissions.
Novell Network Client/Server Install
For the main installation directory (N:\Multisim 7, where N: is the network drive where
Multisim 7 is installed, and Multisim 7 is the name of the folder specified at installation), map
a network drive to the directory. Set up security permissions for this directory as follows:
Administrator
(S)upervisor
User
Special directory access (R)ead (F)ile Scan

(C)reate (W)rite
Set up the directory attributes for subdirectories as follows:

Directory
Attributes - User
Library
(R)ead (W)rite (C)reate (F)ile Scan
Lock
Samples
(R)ead (F)ile Scan
Ulticap
Ulticap\Sch
1-9
Introduction
Introduction
Introduction
All directories not listed above should have (R)ead (F)ile Scan permissions.
Running Multisim 7 from any station for the first time:
1. The first time you startup Multisim 7, you will be asked for a Release Code. Follow the
instructions in 1.5.1.2 Getting the Release Code for the Single User Version on page 14, to obtain the applicable Release Code for your system. Only one Release Code is
required to operate the Network Installation of Multisim 7.
2. Electronics Workbench recommends that you obtain the Release Code as soon as possible.
1.5.2.3 Combination Multi-Station Standalone and Network Installation

Follow the instructions in 1.5.2.1 Multi-Station Standalone Installation on page 1-5 and
1.5.2.2 Network Installation on page 1-7 as necessary. The total number of users and/or
stations is restricted to the total number of users listed in the Site License Version section of
the License Agreement at the front of this book.
Note Only one serial number and release code is required for this type of installation.
1.6
Installing Feature Codes for Previously

Installed Versions of Multisim 7
If you already have Multisim 7 installed because you purchased it earlier, and have now
received Feature Code(s) for optional features which you purchased subsequently, you will
need to re-run the initial installation. This lets you enter your Feature Codes into Multisim 7,
thereby unlocking the feature. When installing Feature Codes, you do not have to uninstall
Multisim 7.
To install a Feature Code with a previous installation of Multisim 7:
1. Re-run the Multisim 7 installation program, as described in the previous sections.
2. When you are prompted, enter the Feature Code in the blank field, and click Next. A new
blank field appears.
3. If you have purchased more than one feature, enter the next Feature Code, and click Next.
4. Continue to entering Feature Codes and clicking Next until you have entered all the
Feature Codes you need.
5. When you are finished entering Feature Codes, leave the last field empty and click Next.
1-10
1.7
Uninstalling Multisim 7
1.7.1
Uninstalling Single User Version

1. Ensure you have recorded the serial number and any Feature Codes in 1.5.1.1 Installing
the Single User Version on page 1-3.
2. Click the Windows Start button.
3. Click Settings and Control Panel.
4. Click Add/Remove Programs. The Add/Remove Programs Properties screen appears.
5. From the Install/Uninstall list, select Multisim 7 and select Add/Remove. Multisim 7 will be
removed from your computer.
1.7.2
Uninstalling Site Version

1.7.2.1 Uninstalling Standalone Multi-Station Installation
At each standalone workstation, perform the following procedure:
1. Ensure you have recorded the serial number and any Feature Codes in 1.5.2.1 MultiStation Standalone Installation on page 1-5.
5. From the Install/Uninstall list, select Multisim 7 and select Add/Remove. Multisim 7 will be
removed from the standalone workstation.
1.7.2.2 Uninstalling Network Installation

Only the workstation that was used to install Multisim 7 to the network directory (host
computer) can be used to remove it. Performing the steps below on other workstations (client
computer) will only remove the Multisim 7 folder and increment the Feature Code monitoring
the number of stations.
To uninstall Multisim 7 from the network directory or the Multisim 7 folder:
1. Ensure you have the serial number and any Feature Codes written down prior to
uninstalling Multisim 7. A space has been provided in 1.4.3 to write the numbers.
1-11
Introduction
Uninstalling Multisim 7
Introduction
Introduction

5. From the Install/Uninstall list, select Multisim 7 and select Add/Remove. If the workstation
is the host computer, Multisim 7 is removed from the network directory. If the workstation
is only a client computer, the Multisim 7 folder is removed.
1.7.2.3 Uninstalling Combination Standalone Multi-Station and Network Installation

Follow the instructions in 1.7.2.1 Uninstalling Standalone Multi-Station Installation on
page 1-11 and 1.7.2.2 Uninstalling Network Installation on page 1-11, as necessary.
1.8
How to Reach Us
Electronics Workbench provides you with multiple ways of contacting us. If you have
questions, we suggest visiting our Web site at www.electronicsworkbench.com to review our
frequently asked questions (FAQ) list. Alternatively you can contact us by:
1-12
If you have Internet access, send an email message to

support@electronicsworkbench.com.
Fax information to our Technical Support department at (416) 977-1818.
Call us at (416) 977-5550 and ask for sales or technical support.
Visit our web page at www.electronicsworkbench.com.
1.9
Introduction to the Multisim 7 Interface
1.9.1
Basic Elements
Multisims user interface consists of the following basic elements:
Standard toolbar
Component
toolbar
Status bar
Graphic Annotation toolbar
Project bar
Zoom
buttons
Active
circuit tab
Menus
In Use list
Spreadsheet view
Circuit
window
Instruments toolbar
Menus are where you find commands for all functions.
1-13
Introduction
Introduction
Introduction
The Standard Toolbar contains buttons for commonly-performed functions. Included in this
toolbar are the standard Windows-type buttons and the key buttons used to control Product
Name.
The Instruments Toolbar contains buttons for each instrument.
The Component Toolbar contains buttons that let you select components from the Multisim
libraries for placement in your schematic. This toolbar includes a link to EDAparts.com,
which launches your web browser and directs you to the Electronics Workbench
EDAparts.com website. You can then navigate the site to download parts.
The Circuit Window (or workspace) is where you build your circuit designs.
The Status Bar displays useful information about the current operation and a description of the
item the cursor is currently pointing to.
The Project Bar lets you navigate through the different types of files in a project (schematics,
PCBs, reports) or to view a schematic hierarchy.
The Spreadsheet View allows fast advanced viewing and editing of parameters including
component details such as footprints, RefDes, attributes and design constraints. Users can
change parameters for some or all components in one step and perform a number of other
functions.
1.9.2
Multisim 7 Toolbars
1.9.2.1 Standard Toolbar
The Standard toolbar contains buttons for commonly performed functions. As well as
common functions such Open a New File, Save a File, Print and Zoom there is access to
advanced functions.
The buttons in the Standard toolbar are described below:
Button
Description
New button. Creates a new circuit file.
Open button. Opens an existing circuit file.
Save button. Saves the active circuit.
1-14
Button
Description
Cut button. Removes the selected elements and places them on the
Windows clipboard.
Copy button. Copies the selected elements and places them on the Windows
clipboard.
Paste button. Inserts the contents of the Windows clipboard at the cursor
location.
Print Circuit button. Prints the active circuit.
Increase Zoom button. Magnifies the active circuit.
Decrease Zoom button. Decreases the magnification of the active circuit.
Zoom 100% button. Shows the circuit in the workspace at its normal size.
Fit to Page button. Displays the entire active circuit in the workspace.
Toggle Project Bar button. Switches the Project Bar on and off.
Toggle Spreadsheet View button. Switches the Spreadsheet View on and
off.
Database Management button. Launches the Database Management
dialog box.
Create Component button. Launches the Create Component Wizard.
Run/stop Simulation button. Starts/stops simulation of the active circuit.
Show grapher button. Displays the grapher.
Analyses button. Displays a list of available analyses.
Postprocessor button. Displays the Postprocessor dialog box.
1-15
Introduction
Introduction
Introduction
Button
Description
Electrical Rules Checking button. Checks that the electrical rules
established for the wiring of the circuit have been followed.
Back Annotate from Ultiboard button.
Forward Annotate button.

In Use List. Click on the arrow to display a list of the
active circuits components.
Help button. Launches the help file.
1.9.2.2 Component Toolbar

The buttons in the Component toolbar are described below. Each button will launch the place
component browser (Select a Component dialog box) with the group specified on the button
pre-selected.
Button
Description
Source button. Selects the Source components group in the browser.
Basic button. Selects the Basic components group in the browser.
Diode button. Selects the Diode components group in the browser.
Transistor button. Selects the Transistor components group in the browser.
Analog button. Selects the Analog components group in the browser.
TTL button. Selects the TTL components group in the browser.
CMOS button. Selects the CMOS component group in the browser.
1-16
Button
Description
Miscellaneous Digital button. Selects the Miscellaneous Digital component
group in the browser.
Mixed button. Selects the Mixed component group in the browser.
Indicator button. Selects the Indicator component group in the browser.

Miscellaneous button. Selects the Miscellaneous component group in the
browser.
RF button. Selects the RF component group in the browser.

Electromechanical button. Selects the Electromechanical component group
in the browser.
EDAparts.com button. Launches the eda.parts.com website.

Place Hierarchical Block button. Opens a file to be embedded as a
hierarchical block.
Place Bus button. Places a bus on the workspace.
1.9.2.3 Graphic Annotation Toolbar

The buttons in the Graphic Annotation toolbar are described below.
Button
Description
Place Text button. Places a text frame on your workspace into which you can
enter miscellaneous text.
Line button. Click on this button to draw a line.
Multiline button. Click on this button to draw a multiline.
Rectangle button. Click on this button to draw a rectangle.
1-17
Introduction
Introduction
Introduction
Button
Description
Ellipse button. Click on this button to draw an ellipse.
Arc button. Click on this button to draw an arc.
Polygon button. Click on this button to draw a polygon.
Picture button. Click on this button to place a picture on the workspace.
1.9.2.4 Instrument Toolbar

The buttons in the Instruments toolbar are described below. In each case, the button places a
specific instrument on the workspace.
Some versions of Multisim do not include all of the instruments noted below.
Button
Description
Multimeter button. Places a multimeter on the workspace.
Function Generator button. Places a function generator on the workspace.
Wattmeter button. Places a wattmeter on the workspace.
Oscilloscope button. Places an oscilloscope on the workspace.

Four Channel Oscilloscope button. Places a four-channel oscilloscope on
the workspace.
Bode Plotter button. Places a bode plotter on the workspace.
Frequency Counter button. Places a frequency counter on the workspace.
Word Generator button. Places a word generator on the workspace.
1-18
Button
Description
Logic Analyzer button. Places a logic analyzer on the workspace.
Logic Converter button. Places a logic converter on the workspace.
IV-Analysis button. Places an IV Analyser on the workspace.
Distortion Analyzer button. Places a distortion analyzer on the workspace.
Spectrum Analyzer button. Places a spectrum analyzer on the workspace.
Network Analyzer button. Places a network analyzer on the workspace.

Agilent Function Generator button. Places an Agilent function generator on
the workspace.
Agilent Multimeter button. Places an Agilent multimeter on the workspace.

Agilent Oscilloscope button. Places an Agilent oscilloscope on the
workspace.
Dynamic Measurement Probe button. Attaches a probe to the mouse
pointer that measures voltage and frequency on any wire on your schematic.
This function is only active during simulation.
1-19
Introduction
Introduction
Introduction
1.10
Configuring Multisim 7 Preferences

You can configure most of the preferences related to schematic entry such as page size, font
selection, auto-backup interval, component placement mode (either single or continuous
placement.) Most configuration is done through Options/Preferences. Your configuration
settings are saved individually with each circuit file you use, so you could have one color
scheme for one circuit and another for a different circuit. You can also create default settings
that affect both the current circuit and all circuits you subsequently create. For example, if you
set the default workspace settings to show the component labels then when you use File/New
to create a new circuit, that circuit will show the component labels as well. However, if your
current circuit shows component labels and you simply change it to hide such labels, the
change affects only your current circuit.
1.10.1 Controlling Circuit Display

You can control the way your circuit and its components appear on the screen, and the level of
detail which appears.
To set the default circuit display options for circuits, choose Options/Preferences. The Preferences screen appears, offering you eight tabs of options, with the Circuit tab being the active
tab. Use this tab to control the colors and display details for your circuit. For other window
display options, choose the desired tab. For example, to define whether grid, page bounds and
titles blocks are shown, use the Workspace tab. To set the component symbols to either ANSI
or DIN, use the Component Bin tab. Experiment with these options as you wish.
To save your options for the current circuit only, click OK. To save your options as the default,
affecting both the current and subsequent circuits, click Set as Default, then click OK.
To restore your previously saved default settings (if you dont like the changes you made and
would like to start over again), click Restore Default and then continue making changes.
1-20
Shows the results of enabling

the options on the right.
Enable those items you want

shown. You can override your
choices for a particular
component.
Select a built-in color

scheme.
Set up a custom color
scheme (only if Custom
selected as scheme).
Shows the currently

selected color scheme.
Saves the selected

settings for current and
subsequent circuits.
Restores the default

settings to previously
saved ones.
Saves the settings for the

current circuit only.
To cancel your changes and close the screen, click Cancel.
1-21
Introduction
Configuring Multisim 7 Preferences
Introduction
Introduction
1.10.2 Customizing the Interface

Options/Customize allows you to customize the menus, toolbars and keyboard shortcuts to suit
your work preferences. For example, you can add a new toolbar that contains the functionality
that you use frequently. It is best when you are first starting to become familiar with Multisim
to use the default menus and toolbars until you become accustomed with the program. For
more details, refer to the Multisim 7 User Guide.
1.10.3 Other Customization Options

The View menu also contains some customization options that toggle on or off display of the
grid, page bounds, title block, border and ruler bars. As well, the Grapher, the hierarchy
viewer and the circuit description box can be toggled on or off.
1-22
Building a Circuit
Chapter
2
Building a Circuit
2.1
Introduction
This manual takes you through the process of building and simulating a simple circuit. The
first stage is to choose the components you want to use, place them on the circuit window in
the desired position and orientation, wire them together, and otherwise prepare your design.
The circuit you will build in this chapter is a simple circuit that flashes an LED on and off.
When you have completed the steps in this chapter, you will have a circuit that looks like this:
This circuit file, in its various stages of development, is shipped with Multisim. Throughout
this manual you will be given detailed instructions on how to build this circuit. However, you
will also find references to the files you can open to experiment with the circuit at its different
stages, if you prefer.
Multisim 7 Getting Started and Tutorial
2-1
Building a Circuit
Building a Circuit
2.2
Starting Your Circuit File

To start building your circuit file, start Multisim. Multisim automatically opens a blank circuit
file with which you can work. The circuit window you see when you run Multisim has its
color, size, and display options based on the previously set default settings. You can change
these options to suit your needs by using the Options/Preferences dialog box, as described in
the Multisim 7 User Guide.
2.3
Placing Components in the Circuit Window

You are now ready to start placing the components for your circuit. As explained in the
Multisim 7 User Guide, Multisim offers up to three component databases (Multisim Master
User and, for some Multisim editions, Corporate Library). For the purposes of this
tutorial we are concerned only with the Multisim Master database, which is the component
database shipped with Multisim. For more about the other databases, see the Multisim 7 User
Guide.
2.3.1
About the Component Toolbar

By default, the component toolbar is visible as indicated below. The components you need to
use to create circuits are grouped into logical divisions or groups. Each group is represented
by a button on the component toolbar. Placing your cursor over one of these buttons and
clicking opens the component placement browser with the selected Group open. Each Group
contains a number of families of similar component types.
2-2
2.3.2
Placing Components
2.3.2.1 Placing the First Component

Step 1: Place a Battery
To place the first component (a 5 volt battery):
1. Click on the Source button in the component toolbar. The Select a Component dialog box
opens and you will see a list of the components in the selected group. Choose the
POWER_SOURCES family and view the list of components available in that family.
2. Choose DC Power from the list and click OK. Your cursor changes to indicate a part is
ready to be placed.
A ghost image of the component appears on the circuit window showing you
exactly where the component will be placed.
2-3
Building a Circuit
This section explains how to place components using the Component toolbar. This is the
typical way of placing components. As explained in the Multisim 7 User Guide, you can also
place components using Place/Component, which is useful if you are not sure which group
contains the component you are interested in placing.
Building a Circuit
Building a Circuit
3. Move to the top left corner of the circuit window, where we want to place the battery.
Click in this general area or, to be more precise, use the page borders as a guide and click
in the intersection of row A and column 1. The battery appears on your circuit window:
The descriptive text that appears around the various components can, if you wish, be
hidden. To hide it, double-click the component. The components properties dialog box
appears with various tabs. On the Display tab, de-select the option Use Schematic Global
Setting, then de-select the descriptive text options for the component. Show or hide
descriptive text for all components by using Options/Preferences and changing the settings
in the Show box of the Circuit tab.
Step 2: Change the Batterys Value

By default, the battery is a 12V battery, but our circuit calls for a 5V battery. You can easily
change the batterys value.
To change the batterys value:
1. Double-click on the battery. The batterys properties dialog box appears, with the Value
tab displayed.
2-4
Note For more details on this dialog box and its tabs, see the Multisim 7 User Guide.
2. Change the 12 to a 5 and click OK.
Multisim treats virtual components slightly differently from real parts. Virtual components
have a different default color from that of real components on your schematic. This is to
remind you that, since they are not real, these components will not be exported to PCB layout
software, should you perform this step later. You will see this difference in the next step, when
you place a resistor.
2.3.2.2 Placing the Next Components

Step 1: Place a Resistor
To place the first resistor:
1. Click on the Basic button in the Component toolbar. The Select a Component dialog box
opens displaying a list of the components in the selected group. Choose the Resistor family. The Component list changes to display resistors available in the Resistor family from
the Multisim master level of the database.
2. Scroll through the Component list to find the 100 ohm resistor we need for our circuit.
2-5
Building a Circuit
This ability to change the value of a part exists only for virtual components. Virtual
components are not real; that is, you could not buy them from a supplier. Virtual parts include
all sources, virtual resistor/capacitor/inductor parts and also include other ideal devices
intended to provide theoretical equivalents of, for example, the perfect opamp. Use virtual
components to enable simulation (by providing stimuli) or to explore what if scenarios
early in your design process.
Building a Circuit
Tip To make your scroll through the Component list faster, simply click in the Component
field and type the first few characters of the components name. For example, type 100
to move to that area of the list.
Building a Circuit
3. Select the 100 ohm resistor and click OK or double click on the component. The cursor
will appear on the circuit window as a ghost image of the resistor.
4. Move your cursor to approximately A5 and click to place the component.
Notice that the resistor looks different from the battery you just placedthe resistor
appears in a different color to remind you it is a real component (and will be exported to
PCB layout software, if you choose to perform that step).
Step 2: Rotate the Resistor

To set up the resistor so it can be wired more conveniently into our circuit, we will first need
to rotate it.
To rotate the resistor:
1. Right-click on the resistor. A pop-up menu appears.
2. Choose 90 CounterCW from the menu. The results look like this:
3. If you want, you can move the labels that accompany a components symbol. In particular,
you may want to do this after some rotations, if the labels are displayed other than as you
prefer. For example, you might want to move the reference ID label. Just click and drag it
to the right of the symbol, or click and use the arrow keys on the keyboard to move the
label in grid increments.
Step 3: Add Other Resistors

The circuit calls for two other resistors, this time a 120 ohm and a 10 kohm.
To add the other resistors:
1. Following the instructions above, add a 120 ohm resistor at roughly the intersection of row
D and column 2. Notice how this second resistor is given the reference ID R2, to indicate it is the second resistor placed.
2. Place the third resistor, a 10 kohm one, at roughly the intersection of A4 and rotate it.
Take a moment to look at the In Use list, just to the right of the Standard Toolbar. It lists all
the components you have placed so far. You can easily re-use a component from this list by
clicking on it.
2-6
The results should look like this:
Building a Circuit
If necessary, you can easily move your placed components to the desired location. Simply
click the component to select it (be sure to select the whole component, not just a label) and
either drag it to the new location or use the arrow keys on your keyboard to move the
component incrementally along the grid.
Step 4: Save Your Changes

To save your changes, choose File/Save As, and give a name (and location) for your circuit
file.
Note Do not use non-English characters (for example, those with accents) when creating
folder names, file names or subcircuit names.
2.3.2.3 Placing Other Components

Following the procedures above, place the following components in the following locations:
a red LED (from the LED Family in the Diodes Group) just below R1
a 74LS00D (from the 74LS Family in the TTL Group), roughly at D1 (Since this
component consists of four separate gates, you are prompted to choose which one you
will use. All are identical, so you can choose any one.)
a 2N2222A BJT_NPN (from the BJT-NPN Family in the Transistors Group), to the
right of R2
2-7
Building a Circuit
Building a Circuit
another 2N2222A BJT_NPN below the LED (simply copy the previous one and paste
the copy at the new location)
a 330nF capacitor (from the Capacitor Family in the Basic Group), to the right of your
first BJT_NPN, and rotate it clockwise (move the labels after rotating, if desired)
a ground (from the Power Sources Family in the Sources Group), below V1, Q1, Q2
and C1 you may use any number of grounds in your circuit, as in this tutorial, or
just one with multiple parts connected to it)
a 5 Volt VCC (from the Power Sources Family in the Sources Group), in the top left
corner of the circuit window, and a digital ground (from the Power Sources Family)
just below it.
Note A circuit containing a digital component must have VCC and a digital ground placed
on the circuit window. Multisim will use these two components to power the digital
component. Setting the voltage of VCC is the users responsibility.
The results should look something like this:
Tip To quickly move your components into line, select them and use the arrow keys on your
keyboard to move the components in grid increments. Lining them up will make wiring
easier.
Note Dont forget to save your changes using File/Save.
2-8
Changing the Label and Color of Individual Components and Nodes
2.4
Changing the Label and Color of Individual

Components and Nodes
To change the label of any individual component you have placed:
1. Double-click on the component. The components properties dialog box appears.
2. Click the Label tab and enter or modify the label (which must be composed of letters and
numbers onlyno special characters or spaces).
3. To cancel your changes, click Cancel. To save your changes, click OK.
To change the color of any individual component, right-click on it and choose Color from the
pop-up menu. Choose the desired color from the dialog box that appears.
Note Changing the color of an individual component is different from changing the color
scheme of the current circuit, or of the defaults set using Options/Preferences, as
explained earlier in this manual.
2.5
Wiring
Now that you have the components placed on the circuit window, you need to wire them
together. All components have pins that you use to wire them to other components. In
Multisim, you can choose to wire components either automatically or manually. Automatic
wiring, a feature unique to Multisim, means Multisim automatically wires the connection for
you, selecting the best path between your chosen pins. Automatic wiring avoids wiring
through other components or overlapping wires. Manual wiring means you control the path of
the wire on the circuit window. You can even combine the two methods in a single wire, for
example, starting wiring manually and letting Multisim automatically complete the wire for
you.
We need to wire together the components we placed in the circuit. Automatic wiring will take
care of most of our wiring needs for this circuit. To follow along with these steps, you can
either continue with the circuit youve been building in this chapter, or open the file
tut1.ms7, located in the Tutorial folder, to work with a circuit that has all the
components appropriately placed.
2-9
Building a Circuit
Multisim assigns labels and colors to a placed component. You can modify or move
component labels, and change component colors.
Building a Circuit
2.5.1
Using Automatic Wiring

Well begin with wiring V1 and its ground.
Building a Circuit
To start the automatic wiring process:

1. Click the pin coming out of the bottom of V1. The cursor changes to a cross symbol indicating that you are in wiring mode.
2. Click the pin on the top of the ground. The wire is dragged from the first pin to wherever
you move your cursor. The two components automatically become wired together and
look like this:
Note By default, the wires are displayed in red. To change the default, right-click on the
circuit window and choose Color from the pop-up menu. To change the color of just a
single wire, right-click on the wire and choose Color from the pop-up menu.
3. Using automatic wiring, make the following connections:
wire V1 to R1
wire R1 to the LED
wire the LED to the collector of Q2
wire the emitters of Q2 and Q1 to their grounds
wire C1 to its ground
wire base of Q1 to R2
wire R2 to pin3 (output) of U1
wire pin1 of U1 to pin 2 of U1
wire R3 to the wire running from V1 to R1 click on the pin of R3 and then click the
wire to automatically place a junction where the wires meet
wire base of Q2 to collector of Q1
wire R3 to the wire running from Q2 to Q1
wire C1 to the connection on the wire running from Q2 to Q1.
2-10
Wiring
Building a Circuit
After a wire is connected between two pins the cursor returns to its normal mode and is ready
for your next command.
To delete a wire, right-click on it and choose Delete from the pop-up menu, or press DELETE.
2.5.2
Using Manual Wiring

We now want to connect the inputs of U1 to the wire between the LED and Q2. To have
precise control over the path of the wire, we will use manual wiring. Multisim prevents you
from placing two wires on a single pin. This is to prevent possible wiring errors. We therefore
need to start, not from pin 1 or 2 of U1, but from the wire between them. To wire from the
middle of one wire to another wire, you have to add a junction on the first wire.
To add a junction:
1. Choose Place/Junction. The junction is shown as a ghost image at the point of the cursor.
2. Move the junction to the desired location on the wire between the inputs of U1 and click.
2-11
Building a Circuit
Building a Circuit
3. The junction appears on the wire:
Junction
We now need to use manual wiring to ensure that the wire follows the path we want. To help
position the wire appropriately, display the grid (if it is not visible).
To display the grid, right-click on the circuit window and choose Show Grid from the pop-up
menu.
We are now ready to wire the connection manually.
To make a manual connection:
1. Click the junction you just placed at the inputs of U1. Your cursor will change to a cross
symbol indicating the you are in wiring mode.
2. Drag the wire down to below the other components and click. This fixes the wire in its
place.
3. Drag the wire across the width of the circuit to a few grid spaces past the last component.
Click again.
4. Drag the wire up to a point across from the wire between LED1 and Q2. Click again.
5. Drag the wire to a place on the wire between LED1 and Q2 and click again.
2-12
Wiring
The results look like this:
Building a Circuit
Add your own drag point by pressing the CTRL key while clicking on
the wire. Modify the shape of the
wire by dragging this point.
The mouse was clicked at these points.

You can modify the wire by dragging
these points.
Click on the wire you just made. The boxes displayed on the wire (drag points) show where
you clicked as you placed the wire. You can modify the shape of the placed wire by clicking
on any of these points and dragging the wire segment. If you want to experiment with this,
save your changes first.
While the wire is selected, you can add additional drag points by using the CTRL key and
clicking the wire where you want to add more points. You can also move the wire by moving
your cursor over the wire and then click and drag when your cursor changes to a double arrow
symbol.
Note To remove a drag point, press the CTRL key and click on the point. When you remove a
drag point, the wire will stretch to a straight line between the two points on either side
of the point you removed.
2-13
Building a Circuit
2.6
Using the Spreadsheet View
Building a Circuit
The Spreadsheet View allows you to get a global view of most of the properties associated
with the components, nets and PCB layers in your design. If not already selected click the
Spreadsheet button to make the spreadsheet visible. At the bottom of the workspace you will
see the spreadsheet view and the three tabs that allow you to view the different properties of
your design. Choose the Components tab and notice the list of components from your design.
Click on the heading of a column the list will be sorted in ascending order of the column that
you selected. If you click the heading again the column will be sorted in descending order.
2.6.1
Changing a Components Properties Using the

Spreadsheet
Click on the Reference ID heading to sort the list by reference designators. Scroll down the
list until the resistors R1, R2 and R3 are visible. Click on R1 and then hold the shift key and
click on R3. Notice how the three rows for the resistors are selected. You can change the
footprint for all three items by clicking the Footprint field for any one of the resistor rows and
entering the new footprint from the Edit Footprint dialog box. To try this yourself click on the
footprint for resistor R1. Click on the Standard Footprint button and scroll through the list of
2-14
Adding a Title Block to the Circuit
footprints until you find RES1206. Click Select and notice how all the footprints for resistors
have been changed to the new value.
Building a Circuit
2.7
Adding a Title Block to the Circuit

Multisim allows you to add a title block your circuit from a selection of sample title blocks.
To add a title block:
1. Choose Place/Title Block.
2. Navigate to the Titleblocks folder, select default.tb7 and place it near the bottom
right of your circuit window.
3. Right-click on the title block and from the context menu choose Move to Bottom Right.
4. To edit the title block data, choose Options/Modify Title Block. Enter the desired text in the
fields and click OK.
Some versions of Multisim include the Title Block Editor, which allows editing of the title
block layout or creation of a new layout with, for example, an embedded graphic of your
company logo. Choose Tools/Title Block Editor to use the editor. See the Multisim 7 User
Guide for more details.
2-15
Building a Circuit
2.8
Adding Text to the Circuit

To add text:
Building a Circuit
1. Choose Place/Text.
2. Click on the circuit window where you want the text placed. A text box appears.
3. Type the textfor example, type LED Flasher.
4. Click anywhere on the circuit window to close the text box. The text appears in your
circuit.
To delete text, right-click on the text box and choose Delete from the pop-up menu or press
DELETE.
To change the color of text, right-click on the text box, choose Color from the pop-up menu,
and choose the desired color.
To edit text, double-click on the text box and make your changes. Click any location out of the
text box to stop editing text.
To move text, click on the text box and drag it to a new location.
2.9
Adding Graphic Annotation to the Circuit

The following example places a rectangle on the workspace.
To add graphic annotation:
1. Choose Place/Graphics/Rectangle.
2. Click and hold the mouse button on the circuit window where you want the upper left
corner of the rectangle placed.
3. While still holding the mouse button drag a rectangle by rolling the mouse down and to
the right. When you let go of the mouse button the rectangle will be drawn on the circuit.
To delete the rectangle, click on the rectangle and choose Delete from the pop-up menu or
press DELETE.
To change the color of the rectangle, right-click on the rectangle, choose Pen Color from the
pop-up menu, and choose the desired color.
To change the fill color of the rectangle, right-click on the rectangle, choose Fill Color from
the pop-up menu, and choose the desired color.
To move the rectangle, click on the rectangle and drag it to a new location.
2-16
Conclusion
2.10
Conclusion
2-17
Building a Circuit
You have now experimented with the different ways of locating, placing and wiring
components on the circuit window. You have also seen some of the options available to you
for controlling the appearance of your circuit. Before we go on to add an instrument, we will
explore editing components in the next chapter.
Building a Circuit
Building a Circuit
2-18
Chapter
3
Editing a Component
Because there are several different types of modifications you can make, an explanation of
specific tasks is beyond the scope of this manual. For details on editing components, refer to
the Multisim 7 User Guide.
3.1
Introduction to Component Editing

Component editing allows you to modify any component stored in Multisims component
database. For example, an existing component might now be available in a new package
(originally pin-through hole, now surface mount). You can easily copy the component
information and change only the package details to create this new component. You can also
use component editing to create your own component (and place it into the database), or
delete a component from the database. In the component database each component is
identified by seven types of information, each accessed through a separate tab:
general information (such as component name, manufacturer, function, date the component was created and the author of the component).
symbol (pictorial representation of the component for schematic capture).
model (information used to represent the actual operation/behavior of the component during simulation) necessary only for a component that will be simulated.
pin model (model information for simulating the interface to the component
footprint (the package information that Multisim uses when exporting a schematic diagram containing this component to a PCB layout package such as Ultiboard, also from
Electronics Workbench).
Electrical Parameters of the components.
User Fields (if used to further define the components. The field titles can be modified by
using Tools/Database Management.)
Parts can also be created using the Component Wizard. For details, refer to the Multisim 7
User Guide.
3-1
Editing a Component
This chapter gives you a brief introduction to the kinds of modifications you can make by
using component editing and the in-place editor. It shows you how to select the type of
modification you wish to make and the component you wish to modify.
Editing a Component
3.2
Editing a Component
1. Choose Tools/Database Management from the Standard toolbar.
Editing a Component
2. Choose the Component tab and select the component to edit from the component list.
3. Click Edit.
4. The Component Properties dialog box opens. Choose the Symbol tab and click Edit.
5. The Symbol Editor will start with a copy of the components symbol for you to edit. To
actually modify a symbol, a model, or a footprint, is somewhat involved and is therefore
beyond the scope of this manual. For now choose File/Exit to close the Symbol Editor.
6. Click the Cancel button to close the Component Properties dialog box and return to
Multisim. For more information about using these tabs, see the Multisim 7 User Guide.
3-2
Editing a Symbol Using In-Place Edit
3.3
Editing a Symbol Using In-Place Edit

You may want to edit the symbol for a component on a circuit to change the position of a pin
or add some descriptive text.
To use the In-Place Symbol Editor:
1. Select the component you wish to edit.
2. Right-click on the component to activate the context menu.
3. Choose Edit Symbol to start the In-Place Symbol Editor. You can move pins and add
descriptive text or graphics to the symbol.
3.4
Conclusion
In this chapter you have been introduced to component editing and using the In-Place Symbol
Editor.
3-3
Editing a Component
Note The In-Place Symbol Editor does not allow you add pins as this would require a change
in the model also. For detailed instructions on how to change a model or other properties of a component see the Multisim 7 User Guide.
Editing a Component
Editing a Component
3-4
Chapter
4
Adding Instruments to Your Circuit
This chapter gives you a brief overview of Multisims instrument functions and takes you
through the steps of adding an instrument to your circuit. Multisim offers a variety of virtual
instruments. This chapter describes the oscilloscopefor other instruments, please see the
Multisim 7 User Guide.
4.1
Introduction
The instrument toolbar is displayed by default. If your instrument toolbar is not displayed,
click the View/Toolbars/Instrument Toolbar menu item. When you select this menu item, the
Instruments toolbar appears. It contains one button for each instrument.
Multimeter
Wattmeter
Four Channel Frequency

Oscilloscope Counter
Logic
Analyzer
Distortion
Analyzer
Network Agilent
Analyzer Function
Generator
Agilent
Scope
Dynamic
Measurement
Probe
Function
Generator
Oscilloscope Bode
Plotter
Word
Generator
Logic
Converter
IV-Analyzer Spectrum
Analyzer
Agilent
Multimeter
4-1
Instruments
Multisim provides a number of virtual instruments. You use these instruments to measure the
behavior of your circuits. These instruments are set, used and read just like their real-world
equivalents. They look and feel just like the instruments youve seen and used in a lab. Virtual
instruments are one of the best and easiest ways of examining your circuits behavior by
displaying the results of simulation.

Virtual instruments have two views:
1. The instrument icon which appears when you select the instrument from the toolbar and
place it on the workspace and attach to your circuit.
Instrument identifier
Instrument icon
2. The opened instrument, where you set the instruments controls and display options.
Opened instrument
Instruments
Terminals input/output
indicators
4.2
Adding and Connecting Instruments

For the purposes of this tutorial, we want to add an oscilloscope to the circuit. Either carry on
with the circuit you have been creating so far, or open the file tut2.ms7 (which has been
properly wired) from the Tutorial folder and proceed.
Step 1: Add an oscilloscope

To add the oscilloscope:
1. Click the Oscilloscope button in the Instruments toolbar and move your cursor to the circuit
window. Your cursor will appear as the ghost image of the instrument.
2. Move the cursor to the right side of your circuit and click.
3. The oscilloscope icon appears on the circuit window.
4. You now need to wire the oscilloscope into your circuit.
4-2
Adding and Connecting Instruments
Step 2: Wire the oscilloscope to the circuit

To wire the oscilloscope into your circuit:
1. Click the A terminal on the oscilloscope icon and drag a wire to the junction between the
output of U1 and R2.
2. Click the B terminal on the oscilloscope icon and drag a wire to between Q2 and C1.
Your circuit should look like this:
Instruments
Youll see the results of your work in the next chapter when you simulate the circuit.
4-3
4.3
Configuring Instrument Settings

Each virtual instrument provided by Multisim includes its own series of optional settings that
control its display.
To open the oscilloscope, double-click the oscilloscope icon. The oscilloscope looks like this:
Graphical display
area
Reverses background
color (toggles between
white and black)
Saves results in an
ASCII file
Grounds the oscilloscope
Instruments
Trigger
Readouts at vertical
cursor 1
Readouts at vertical
cursor 2.
Difference between readouts at vertical cursors
The time base section of the scopes panel controls the scale of the oscilloscopes horizontal
or x-axis when comparing magnitude against time (Y/T)
Value of the divisions on the x-axis
Signals starting point on the x-axis
Adds channel A to channel B
Determines the axes of the oscilloscope display
(Y/T is voltage magnitude against time)
To get a more readable display, adjust the timebase in inverse proportion to the frequency
the higher the frequency, the lower (or more magnified) the time base.
4-4
Conclusion
To set the time base for our circuit:
Set the timebase scale (which should use the waveform magnitude against time (Y/T)
axes) to 20 s/Div to best display the frequencies in our circuit.
Set the Channel A scale to 5V/Div, and click DC.
Set the Channel B scale to 500 mV/Div, and click DC.
4.4
Conclusion
Now that an instrument is in place and configured correctly for the circuit, you can simulate
and see the results displayed on the oscilloscope, as explained in the following chapter.
Instruments
4-5
Instruments
4-6
Chapter
5
Simulating Your Circuit
This chapter explains how to carry out a simulation on your circuit and see the results
displayed on the oscilloscope.
5.1
Simulating your Circuit

You are now ready to simulate your circuit.
You can either continue with the circuit youve been building in this chapter, or open the files
tut3.ms7 from the Tutorial folder to begin with all the components correctly placed
and wired together, and with the oscilloscope wired and set up correctly.
To simulate the circuit, click the Simulate button.
5.2
Viewing Simulation Results

The simulation begins when the Simulate button is clicked, but we need some way of
displaying the results. One of the best ways is to use the oscilloscope we added earlier.
To see the results in the oscilloscope, if necessary, double-click the oscilloscope icon to
open the instrument display, if it isnt already open.
Simulating
5-1
If you changed the instrument settings as described in the previous chapter, you should soon
see results looking something like this:
Also note that on the circuit window, in a capability unique to Multisim, the LED flashes on
and off, displaying its behavior as it responds to circuit source stimulation during simulation.
We will now halt simulation of our circuit.
Simulating
To stop the simulation, click the Simulate button which toggles the simulation off.
5-2
Using the Dynamic Measurement Probe
5.3
Using the Dynamic Measurement Probe

When the simulation is running the Dynamic Measurement Probe allows you to obtain
instantaneous measurements at various points throughout the circuit.
To use the Dynamic Measurement Probe:
1. Start the simulation by clicking on the Simulate button.
2. From the instrument toolbar select the dynamic measurement probe and notice a small
window opens. When you place the probe over a wire in the circuit you will see the
voltage and frequency values at that point. Move the probe to other wires in the circuit to
obtain other readings.
To stop the simulation, click the Simulate button which toggles the simulation off.
5.4
Conclusion
You have learned how to begin simulation and display the simulation results on an instrument.
In the next chapter you will see how to perform an analysis on your circuit and see the results
of that analysis.
Simulating
5-3
Simulating
5-4
Chapter
6
Performing Analyses on Your Circuit
This chapter outlines basic information on using Multisim 7 analyses and explains how to
perform one such analysis on your circuit.
6.1
The Analyses
Multisim provides you with many different types of analyses. Each one includes step-by-step
instructions, provided on-line, to guide you through its use.
When you perform an analysis, the results are displayed on a plot in the Multisim Grapher
(unless you specify otherwise) and saved for use in the Postprocessor.
To choose an analysis click the Analysis button in the Standard toolbar and select an analysis
from the menu that appears. When you select an analysis you will see a dialog box with
several tabs which for most analyses including:
the Analysis Parameters tab, where you set the parameters for this particular analysis
the Output Variables tab, where you specify which nodes are to be analyzed and what is to
be done with the results
the Miscellaneous Options tab, where, if you wish, you can choose a title for the plot, as
well as other options
the Summary tab, where, if you wish, you can see a consolidated view of all the settings
for the analysis.
For complete information on using the analyses dialog boxes, refer to the Multisim 7 User
Guide.
6-1
Analysis
6.2
About Transient Analysis

In the Multisim 7 User Guide, each analysis is described in detail, including the theory behind
what Multisim does to perform the analysis. It is not necessary that you understand this
information, which is provided primarily for the sake of completeness.
In transient analysis, also called time-domain transient analysis, Multisim computes the
circuits response as a function of time. Each input cycle is divided into intervals, and a DC
analysis is performed for each time point in the cycle. The solution for the voltage waveform
at a node is determined by the value of that voltage at each time point over one complete
cycle.
6.3
Running the Analysis

To initiate the analysis:
Analysis
1. Click the Analysis button on the Standard toolbar and choose Transient Analysis from the
menu. The simplified Transient Analysis dialog box appears, offering four tabs. To view
the full dialog box with all the options and information displayed, as in the example shown
below, click More.
6-2
Running the Analysis
The Miscellaneous tab offers options that provide you with additional flexibility, but that are
not required. Use this tab to set a title for the analysis results, to check if the circuit is valid for
analysis and to set custom analysis options.
The Summary tab offers a quick overview of all the various settings for your analysis. It is not
required, but you can use it to view summary information about your analysis once it is
complete.
To perform the analysis, you have to set values on the other two tabs.
Step 1: Choose Output Variables

We are going to want to perform the Transient Analysis on nodes 2 (between Q1 and Q2) and
6 (from pin 3 of the gate). Choose those nodes from the available nodes on the Output
Variables tab.
Note If you are still using your circuit, your node numbers may not match the ones above
(node 2 and 6). This is likely a result of your circuit being wired correctly, but in a different sequence from the steps we suggested for the tutorial circuit. You can choose to
continue to use your circuit and select the appropriate node numbers for the equivalent
place in your circuit, or load tut3.ms7 from the Tutorial folder.
To select the nodes:
1. Select 2 from the Variables in circuit list and click Add.
2. Select 6 from the Variables in circuit list and click Add.
6-3
Analysis
The results look like this (if your dialog box doesnt look like this, click More):
Step 2: Set the Analysis Parameters
Analysis
Analysis parameters are set on the first tab as shown earlier in the chapter, and for our circuit
can remain at their default values. Typically however, you would set the parameters in the
Analysis Parameters tab (they are different for each type of analysis) based upon the circuit
and simulation you are performing. Refer to the Multisim 7 User Guide for more details.
6-4
Conclusion
Step 3: View the Results

To see the results, click Simulate. You see the following display:
Line representing
the charging/discharging of the
capacitor
The results show how the capacitor (the blue line) charges as a result of the spikes in the red
lines.
To see a key to the line color, click the legends button.
Note The Grapher window shows two tabsone for the analysis you just ran, and one for
the results of the simulation you ran in the previous chapter and viewed using the
oscilloscope.
The Multisim Grapher offers a variety of tools for examining the results of your simulation
and analysis. Take some time to experiment with the different buttons and commands. For
example, in the Transient Analysis tab, by dragging the cursor, you create a zoom box. See
the Multisim 7 User Guide for full details.
6.4
Conclusion
This chapter introduced you to the primary steps in performing an analysis in Multisim.
6-5
Analysis
Analysis
6-6
Generating a Report
Chapter
7
Generating a Report
This chapter explains how to create a Bill of Materials (BOM).
7.1
Introduction
Multisim allows you to generate a number of reports: Bill of Materials (BOM), Component
Detail Report, Netlist Report, Schematic Statistics, Spare Gates and the Cross Reference
Report. This chapter uses the BOM as an example. The other reports are explained in the
7.2
Creating and Printing a BOM

A bill of materials lists the components used in your design and therefore provides a
summary of the components needed to manufacture the circuit board. Information provided in
the Bill of Materials includes:
quantity of each component needed

description, including the type of part (example: resistor) and value (examples: 5.1 Kohm)
reference ID of each component
package or footprint of each component
in the Power Professional edition of Multisim all user fields and their values where the
data has been entered are available. For example, price, availability and supplier can be
reported for each component that has such fields. For more on user fields, see the
7-1
Generating a Report
To create a BOM for your circuit:
1. Click the Reports menu and choose Bill of Materials from the menu that appears.
Generating a Report
2. The report appears, looking similar to this:
To print the Bill of Materials, click the Print button. A standard Windows print screen appears,
allowing you to choose the printer, number of copies, and so on.
To save the Bill of Materials to a file, click the Save button. A standard Windows file save
dialog box appears, allowing you to specify the path and file name.
Because the Bill of Materials is primarily intended to assist in procurement and manufacturing,
it includes only real parts. That is, it excludes parts that are not real or able to be purchased,
such as sources or virtual components.
To see a list of components in your circuit that are not real components, click the Virtual
button. A separate window appears, showing these components only.
7.3
Conclusion
Multisim provides a number of report generation capabilities, including the BOM described in
this chapter.
You have now been through the basic steps in creating and simulating a circuit. The other
buttons on the Standard toolbar include Electrical Rules Check (ERC), Forward and
Backward Annotation.These items are discussed in the Multisim 7 User Guide.
7-2

Manual Multisim 2001 (Ingles)

Uploaded by

Copyright:

Available Formats

Manual Multisim 2001 (Ingles)

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manual Multisim 2001 (Ingles)

Uploaded by

Copyright:

Available Formats

multiSIM 7

Simulation & Capture

Getting Started & Tutorial Guide

multiSIM and Electronics Workbench copyright 1989, 1992-2003

The Multisim 7 Documentation Set

Getting Started and Tutorial

Adobe PDF Files

About this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

What is Multisim 7?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

About Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Installing Multisim 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Installing Feature Codes for Previously Installed Versions of Multisim 7 . . . . . . . . . 1-10

Uninstalling Multisim 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

How to Reach Us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Introduction to the Multisim 7 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

1.10 Configuring Multisim 7 Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20

Starting Your Circuit File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Placing Components in the Circuit Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Using the Spreadsheet View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Adding a Title Block to the Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Adding Text to the Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Adding Graphic Annotation to the Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

2.10 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

Multisim 7 Getting Started and Tutorial Guide

Introduction to Component Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

Editing a Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Editing a Symbol Using In-Place Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

4. Adding Instruments to Your Circuit

Adding and Connecting Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Configuring Instrument Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

5. Simulating Your Circuit

Simulating your Circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Viewing Simulation Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Using the Dynamic Measurement Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3

6. Performing Analyses on Your Circuit

The Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1

About Transient Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2

Running the Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2

Creating and Printing a BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Multisim 7 Getting Started and Tutorial Guide

About this Chapter

About this Manual

Multisim 7 Getting Started and Tutorial Guide

Windows 98/NT 4/2000/XP

Single User Version

Multisim 7 Getting Started and Tutorial Guide

1.5.1.2 Getting the Release Code for the Single User

To enter the Release Code:

Site License Version

1.5.2.1 Multi-Station Standalone Installation

Multisim 7 Getting Started and Tutorial Guide

Getting the Release Code for the Multi-Station Standalone

1.5.2.2 Network Installation

Multisim 7 Getting Started and Tutorial Guide

Restricting Write Privileges

Security on the Multisim 7 directory should be:

(R)ead E(X)ecute (W)rite

Set up the directory attributes for subdirectories as follows:

(R)ead (W)rite E(X)ecute