Core Barrels

Core Barrels
To collect the core of the rock drilled, a

device known as the core barrel is used.
Core barrel retains rock core samples from

drilling operations
Its length varies from 0.5 to 3 m.
There are three types of core barrel in use:

z
The single tube core barrel, and
Double tube core barrel.
Triple tube core barrel
Core Barrels
Single tube core barrel
z
Most rugged, least expensive
Consists of head section, core recovery tube,

reamer shell, & cutting bit
Often used as starter when beginning core

operations
Coring in homogeneous hard rock, (where the

core does not wash away or crumble easily)
and penetrating rock layers above the strata
(where high core recovery is not essential).
Core Barrels
z Single
tube barrels are often used as a

starter barrel during the beginning of
coring operations.
A single tube core barrel is suitable for

homogeneous formations where the core
is not eroded by flushing water and a solid
core can be taken without risk of blockage
in the barrel.
Core Barrels
z
The core lifter is placed within the bevel shell which has its inside
inside
conically shaped to receive the former.
The core lifter is corrugated in the inner face and is a split ring.
ring.
It occupies the wider portion of the bevel shell when drilling

takes place so that it has little or no tendency to grip the core.
core.
After certain progress in drilling when the rods are lifted to take
take
out the core, the split ring descends inside the bevel shell and
grips the core.
The latter may now be broken off by a twist and raised to the
surface.
The core lifter is replaced after about 250m of drilling.
The larger particles of drill cuttings which the circulating water

water
fails to carry up to the surface settle down in the mud bucket.
Core Barrels
Single tube core barrel
Double tube core barrel
Core Barrels
Core Barrels
z Double
tube core barrel is the standard.

z Outer barrel rotates with cutting bit
z Inner barrel is either fixed or swivel type
(with bearings) that retains core sample.
z Core diameters generally range from 21
to 85 mm (0.85 to 3.35 inch).
z NX core: standard diameter = 54 mm
(2.15 inches)
Core Barrels
Double Tube Core Barrel (Swivel Type)
Outer Barrel Assembly
Inner Barrel Assembly
Triple Core Barrel

z Good
for obtaining core

samples in fractured rock
and highly weathered
rocks.
z Outer core barrel for initial
cut and second barrel to
cut finer size. Third barrel
to retain cored samples.
z Reduces frictional heat
that may damage samples.
Drilling Fluids
z Rotary
wash with water, foam, or drilling

mud (bentonitic or polymeric slurries),
Revert.
z Fluids reduce wear on drilling and coring
bits by cooling.
z Fluids remove cuttings & rock flour.
z Recirculate to filter fluids and to minimize
impact on environment
Casing
z Temporary
casing to
stabilize borehole and
maintain drilling
operations
z Driven casing
z Drilled-in casing
Dual-Wall Casing
Dual wall reverse
circulation method
Use in areas with
expected large losses in
drilling fluid
Inner section for
sampling
Outer casing maintains
fluids for drilling
Core Recovery
z Core
Runs taken in either 5- or 10-foot

sections (1.5- or 3-m sections).
z Log the amount of material recovered.
z Core Recovery is percentage retained.
Rock Quality Designation (RQD)

z The
RQD is a modified core recovery.

z Measure of the degree of fractures, joints,
and discontinuities of rock mass
z RQD = sum of pieces > 100 mm (4
inches) divided by total core run.
z Generally performed on NX-size core
Rock
Quality
Designation
Core Recovery
z Cores should be stored in either
wooden boxes or corrugated cardboard
box.
z Box marked with boring number, depth
of core run, type core, bit type, core
recovery (CR), rock type, RQD, and
other notes.
z Core operations should be
documented:
z Loss of fluid, rates, sudden drop in
rods, poor recovery, loss of core
Storage of Cores and Bore Hole Logging

z
The fundamental objective of core drilling is

to collect sub-surface samples in the shape of
core and accompanying sludge material in
order to study their mineral assemblage,
chemical composition, rock structure, physical
strength for various purposes.
After removing the core from the core barrel,
it should be placed in the core box in the
exact order in which it is taken from ground.

z
The core box is a shallow tray 1 metre long with

partitions running lengthlength-wise between which the core
fits into. Each compartment is 11-1/16" to 1/8" wider
than the core diameter.
The core box may be wood with hinged or screwed

cover (or) with mild steel with rounded grooves or
rectangular core compartments.
As the core from each run is placed in the box, a

wooden block upon which the depth of the hole is
written should be placed after the last piece of core of
each run.
Each run is thus separated and thus shows the exact

depth at which it was made. The arrangement of core in
core box is done the different ways.

z BOOK
FASHION: It is like reading a book

starting from LEFT and proceeding to
RIGHT

z SNAKE
FASHION: It starts from LEFT to

RIGHT in the first groove. Once the first
groove is completed the cores are placed
from RIGHT to LEFT in the second groove
and so-on and so forth
10

zA
third system which is less frequently

used is the reverse of book fashion (i.e)
starting from RIGHT to LEFT

z Book
Fashion is preferred the most as it

speeds up logging, identification of
footage at any point in the hole and
lessens chances of error.
11
Core Recovery
Care & Preservation of Rock Cores

z Routine:
rock samples in core boxes

z Special: enclose core in plastic sleeves
z General: avoid exposure to shock and
vibration during handling and transport.
z Non-natural fractures may result from
excessive movements, temperatures,
and exposure to air.
z Storage for future reference
12
Storage of Rock Core Boxes
13
Drilling & Sampling of Soil & Rock

z Objectives:
z
z
z
z
z
z
Recognize various drilling techniques

Be familiar with undisturbed vs. disturbed
sampling methods
List rock exploration methods
Familiarity with core bits & barrels
Observations to be made during drilling: rate, CR,
Rock Quality Designation (RQD).
Appreciate role of geologic mapping in obtaining
information on rock masses.
14
15

Core Barrels

Uploaded by

Copyright:

Available Formats

Core Barrels

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Core Barrels

Uploaded by

Copyright:

Available Formats

What are the different types of core barrels?

What are the different types of core barrels?

What are the advantages and disadvantages of single tube core barrels?

What are the advantages and disadvantages of single tube core barrels?

Core Barrels

To collect the core of the rock drilled, a

Core barrel retains rock core samples from

Its length varies from 0.5 to 3 m.

There are three types of core barrel in use:

The single tube core barrel, and

Double tube core barrel.

Triple tube core barrel

Most rugged, least expensive

Consists of head section, core recovery tube,

Often used as starter when beginning core

Coring in homogeneous hard rock, (where the

tube barrels are often used as a

A single tube core barrel is suitable for

It occupies the wider portion of the bevel shell when drilling

The core lifter is replaced after about 250m of drilling.

The larger particles of drill cuttings which the circulating water

Double tube core barrel

tube core barrel is the standard.

Double Tube Core Barrel (Swivel Type)

Outer Barrel Assembly

Inner Barrel Assembly

Triple Core Barrel

for obtaining core

wash with water, foam, or drilling

Runs taken in either 5- or 10-foot

Rock Quality Designation (RQD)

RQD is a modified core recovery.

Storage of Cores and Bore Hole Logging

The fundamental objective of core drilling is

Storage of Cores and Bore Hole Logging

The core box is a shallow tray 1 metre long with

The core box may be wood with hinged or screwed

As the core from each run is placed in the box, a

Each run is thus separated and thus shows the exact

Storage of Cores and Bore Hole Logging

FASHION: It is like reading a book

Storage of Cores and Bore Hole Logging

FASHION: It starts from LEFT to

Storage of Cores and Bore Hole Logging

third system which is less frequently

Storage of Cores and Bore Hole Logging

Fashion is preferred the most as it

Care & Preservation of Rock Cores

rock samples in core boxes

Storage of Rock Core Boxes

Drilling & Sampling of Soil & Rock

Recognize various drilling techniques

You might also like