Martillo Perforador X2

71 (80)
7849 3655 - B-24-10-2005 SR-CC-FL
QUASAR NV
TECHNICAL DATA
ESPECIFICACIONES TECNICAS
2-310 S-C
2003-11-27
Martillo Perfrorador Series X2
APPLICATION
TECHNICAL DATA
The X2 hydraulic rock drill is designed for tunneling and

mine development drilling with Tamrock Axera jumbos.
It is also suitable for bolt hole and long hole drilling.
Drill steel
drifting
long hole drilling
bolt hole drilling
Shank
DESCRIPTION
Hole diameter
The X2 series is a hydraulic percussive rock drill with

independent reversible rotation and low profile height.
Two X2 models are available.
The X2 F, designed for face drilling or rock bolting,
equipped with :
- a 125 cm rotation motor,
- a stainless flushing head (optional) with stainless
steel water cartridge replaceable without removing
the shank.
male
blast hole
burn cut hole
long hole T38
long hole T45
bolt hole
Weight (w/o flushing head
H32 - H35 drifter rods

39 - 45 mm MF rods
T38 - T45 tube
H25 - H28
R38 - T38 - T45 - R32
43 - 51 mm
76 - 127 mm
64 - 76 mm
76 - 89 mm
35 51 mm
135 kg
Length (w/o shank
969 mm
Profile height
87 mm
Impact rate
52 Hz
Impact power
14 -21 kW
Percussion hydraulic pressure 160-210 bar
The X2 L, designed for long hole drilling, equipped with :

- a high-torque 200 cm rotation motor,
- a flushing enabling retro-percussion (optional).
It is possible to switch over from version X2 F to version
X2 L simply by changing the rotation motor and the
flusning head.
OPTIONAL EQUIPMENT
Flushing head.
Special tools for X2
1/2
SANDVIK TAMROCK SECOMA S.A.S.

19 avenue De Lattre-de-Tassigny - ZI
B.P. 46 - 69881 MEYZIEU Cedex
Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
7849 3655 - B-24-10-2005 SR-CC-FL
72 (80)
QUASAR NV
TECHNICAL DATA
2-310 S-C
2003-11-27
WORKING PARAMETERS
X2 F
X2 L (<30 m)
Percussion mechanism
Operating pressure
Percussion power
Percussion rate
Flow
160 - 210 bar

14 - 19 kW
52 - 59 Hz
90 l/min
15 - 19 kW
57 - 59 Hz
Rotation mechanism
Motor
Flow
Rotation speed
Pressure
Torque
Orbit type, 125 ccm

40 - 70 l/min
220 - 350 rpm
175 - 210 bar
390 - 470 Nm
Accumulator gas
High pressure (HP)
Low pressure (LP)
Filling valve
Nitrogen N2
55 bar
4 bar
Vg8 DIN 7756
Flushing
Water flow
Water pressure
25 l/min (12 bar)

12-15 bar
Working temperature (water flushing)

Ambient temperature
Oil operating pressure
X2 L (>30 m)
175 - 210 bar
16 - 21 kW
53 - 55 Hz
90 l/min
Orbit type, 200 ccm

40 - 70 l/min
135 - 240 rpm
140 - 175 bar
500 - 620 Nm
Shank lubrication
Air flow (at 2.5 bar)
Pressure
Oil consumption
Hose fitting size
Percussion
Rotation
Lubrication
Flushing
Drain
+0...+40 C
+40...+60 C
250 Nl/min
2.5 bar
100 g/h
JIC 1 1/16 - 3/4
JIC 7/8 - 5/8
JIC 1 1/16 - 3/4
JIC 9/16 - 3/8
JIC 7/8 - 1/2
JIC 3/4 - 1/2
JIC 7/8 - 5/8
X2 F
X2 L
X2 F
X2 L
GENERAL DIMENSIONS
X2F
X2L
1099
1099
969
969
115
87
190
155
190
130
155 130
www.tamrock.sandvik.com
Sandvik Tamrock reserve the right to change this specificationwithout further notice
SANDVIK TAMROCK SECOMA S.A.S., B.P. 46 - 69881 Meyzieu Cedex, France

Tel. + 33 4 7245 2200 Fax + 33 4 7831 7980

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
2/2
73 (80)
7849 3655 - B-24-10-2005 SR-CC-FL
QUASAR NV
TECHNICAL DATA
tion
2-100 S-B
2004-05-06
HIDRASTAR 200 Series Rock

DRILL
APPLICATION
TECHNICAL DATA
The Hydrastar 200 hydraulic rock drill is designed for

rock bolting in hard rock with Tamrock Robolt bolters. It
is also suitable for tunneling and mine development
drilling with Tamrock Quasar jumbos.
Drill steel
bolt hole drilling
Shank
Hole diameter
DESCRIPTION
drifting

H22 - H25 integral rods
bolting
drifting
Female R25-R28-R32
Male R32-R38
bolt hole
blast hole
burn cut hole
27 - 45 mm
35 - 41 mm
76 - 89 mm
The Hydrastar 200 is a hydraulic percussive rock drill

with independent reversible rotation and low profile
height, specially designed for upward drilling.
Weight (w/o flushing head
95 kg
Length (w/o shank
583 mm
The Hydrastar 200 is equipped with :
Profile height
70 mm
- a 125 cm direct mounted rotation motor,

- a stainless flushing head (optional) with stainless
steel water cartridge replaceable without removing
the shank.
Impact rate
40 - 65 Hz
Impact power
6 -10 kW
Percussion hydraulic pressure 140 - 200 bar

Noise level
103 dB(A)
OPTIONAL EQUIPMENT
Flushing head (+ 20 kg).
Special tools for Hydrastar 200
1/2

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
7849 3655 - B-24-10-2005 SR-CC-FL
74 (80)
QUASAR NV
TECHNICAL DATA
Technical Specification
2-100 S-B
HYDRASTAR 200 Series Rock Drill
2004-05-06
80 l/m in
65 l/m in
50 l/m in
40 l/m in
TORQUE
mkg
30 l/m in
140 - 200 bar

6 - 10 kW
40 - 65 Hz
60 l/min
20 l/m in
5 l/m in
Percussion mechanism
Operating pressure
Percussion power
Percussion rate
Flow
10 l/m in
WORKING PARAMETERS
Flow
45
40
210 bar
35
175 bar
30
25
Rotation mechanism
Motor
Flow
Rotation speed
Pressure
Torque
140 bar
20
Orbit type, 125 ccm

40 l/min
0 - 300 rpm
175 - 210 bar
360 - 420 Nm
Accumulator gas
High pressure (HP)
Filling valve
10
35 bar
0
0
100
200
300
400
500
Shank lubrication
Air flow (at 6 bar)
Pressure
Oil consumption
250 Nl/min
2.5 bar
100 g/h
Hose fitting size

Percussion
Rotation
Lubrication
Flushing
Drain
+0...+40 C
+40...+65 C
Pressure
R.P.M
Continuous Use Limits
25 l/min (12 bar)

12-15 bar
Working temperature (water flushing)

Ambient temperature
Oil operating pressure
70 bar
Nitrogen N2
55 bar
Vg8 DIN 7756
Flushing
Water flow
Water pressure
105 bar
15
JIC 7/8 - 5/8

JIC 7/8 - 5/8
JIC 9/16 - 3/8
JIC 7/8 - 1/2
JIC 7/8 - 5/8
GENERAL DIMENSIONS
908
765
765
243
243
70
152
115
297
182
www.tamrock.sandvik.com
Sandvik Tamrock reserve the right to change this specificationwithout further notice
SANDVIK TAMROCK SECOMA S.A.S., B.P. 46 - 69881 Meyzieu Cedex, France

Tel. + 33 4 7245 2200 Fax + 33 4 7831 7980

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
2/2
75 (80)
7849 3655 - B-24-10-2005 SR-CC-FL
QUASAR NV
TECHNICAL DATA
3-401 S-C
2004-05-05
NVTF Telescopic Feed
APPLICATION
DESCRIPTION
A series of multi-purpose telescopic drill feed capable to

match 3 different rod lengths for face development, long
hole drilling and bolting in confined environments.
The NVTF hydraulic cylinder telescopic feeds are made

from heavy duty steel alloy profile. The high corrosion
and high torsional resistance steel beam is equipped
with easily replaceable guiding rails fixed with large
diameter studs and bolts.
NVTF feeds are designed for Tamrock Axera and

Quasar jumbos with X 2 and Hydrastar 200 rock drills.
The carriage for rock drill have special wrap around

connecting shoes fitted with special polymer sliding
wear-pieces.
Two types of front centralizer are available.
The solid SFC, for face drilling and rock bolting, the
clamping FCC, hydraulic safe-type for long hole drilling.
Telescoping is ensured by a front hydraulic cylinder and
a rear mechanical extension system.
TECHNICAL DATA
Advance thrust force (100 bar)
Return force (150 bar)
Advance speed (unloaded)
Return speed (unloaded)
Total extension
up to 12 kN
up to 8.4 kN
up to 7 m/min
up to 14 m/min
1 225 mm
OPTIONAL EQUIPMENT
Rear anchoring hydraulic stinger (600 mm extension).
1/2

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
7849 3655 - B-24-10-2005 SR-CC-FL
76 (80)
QUASAR NV
TECHNICAL DATA
3-401 S-C
NVTF Telescopic Feed
2004-05-05
GENERAL DIMENSIONS
FEED EXTENDED
For Face Drilling
850 mm
TYPE
375 mm
Rod length -B-
Hole length
Total length -A-
Weight
NVTF 6/10
10 ft - 3090 mm
2870mm
4260 mm*
450 kg
NVTF 8/12
12 ft - 3700 mm
3380 mm
4870 mm
480 kg
NVTF 10/14
14 ft - 4305 mm
4000 mm
5480 mm
510 kg
* Minus 160 mm with Hydrastar 200 Rock drill
FEED RETRACTED
For Bolting & Cross-Cutting
TYPE
Rod length -D-
Hole length
Total length G-
Bolt length -C-
Heading -mini-
NVTF 6/10
6 ft - 1830 mm
1630mm
3060 mm
5 ft
3200 mm
NVTF 8/12
8 ft - 2475 mm
2140 mm
3670 mm
6 ft
3800 mm
NVTF 10/14
10 ft - 3090 mm
2760 mm
4275 mm
FEED RETRACTED
For Long Hole Drilling
4400 mm
E
F
G
1 st MF-Rod length -F-
MF-Rod length -E-
Total length -G-
Heading -mini-
NVTF 6/10
6 ft - 1830 mm
4 ft - 1220 mm
3060 mm
3200 mm
NVTF 8/12
8 ft - 2475 mm
6 ft - 1830 mm
3670 mm
3800 mm
TYPE
www tamrock sandvik com

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
7849 3655 - B-24-10-2005 SR-CC-FL
77 (80)
QUASAR NV
TECHNICAL DATA
3-100 S-C
2003-10-22
CC 2500 Series Feed
APPLICATION
DESCRIPTION
A series of rugged hydraulic steel feed intended for

drifting, bolt hole and cross-cuttings.
The CC 2500 hydraulic cylinder feeds are made from

heavy duty steel alloy profile. The high corrosion and
high torsional resistance steel beam is equipped with
easily replaceable guiding rails fixed with large diameter
studs and bolts.
Three models are available.

CC 2500 feeds are designed for Tamrock Axera jumbos
with X 2 and Hydrastar 200 rock drills.
CC 2500 EV feeds, with central hose reel, are designed
for restricted area when cross-cuttings are needed.
CC 2500 R are designed for use with RHR 50 or RHR
80 rotary drills.
The carriage for rock drill have special wrap around

connecting shoes fitted with special polymer sliding
wear-pieces.
The drill rod centralizers are equipped with hardened
steel wear-pieces and are designed for optimum
visibility and durability.
The hose support is a conical clamping system that
allows easy individual tensioning of each hose.
TECHNICAL DATA
Advance thrust force (100 bar)
Return force (150 bar)
Advance speed (unloaded)
Return speed (unloaded)
OPTIONAL EQUIPMENT
up to 12 kN
up to 0.8 kN
up to 7 m/min
up to 14 m/min
Hydraulic drill rod retainer for extension drilling.

Mechanized one rod adding system, S.E.R.H., for
occasional long-hole drilling.

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
7849 3655 - B-24-10-2005 SR-CC-FL
78 (80)
QUASAR NV
TECHNICAL DATA
3-100 S-C
CC 2500 Series Feed
2003-10-22
GENERAL DIMENSIONS
CC 2500
CC 2500 EV
CC 2500 R
Roto-percussive Rock drill
Rotary drill
Rod length
Total length
Hole length
Rod length
Total length
Hole length
Net
Weight
CC 2508
2475 (8)
4055
2090
3090
4055
2090
300
CC 2510
3090 (10)
4665
2700
3700
4665
2700
360
CC 2512
3700 (12)
5275
3310
4305
5275
3310
420
CC 2514
4305 (14)
5880
3910
4915
5880
3910
480
CC 2516
4915 (16)
6490
4520
5525
6490
4520
520
TYPE
mm (ft)
mm
mm
mm
mm
mm
kg
For CC 2500 EV model, leaves 400 mm from the total length

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
79 (80)
7849 3655 - B-24-10-2005 SR-CC-FL
QUASAR NV
TECHNICAL DATA
4-500 S-D
B 14 NV Boom
2004-09-02
Feed Roll-over
Feed Extension
Feed Tilt
Boom Extension
Feed Angle
Boom Swing
Boom Lift
APPLICATION
DESCRIPTION
B 14 NV boom is designed for Tamrock Quasar Narrow

Vein jumbos.
The x-y coordinated boom movements together with

double rotation device allows a vertical positioning of the
feed on both side of the boom and the possibility to drill
extremely close to the hanging and foot walls, both to
the right and left, with the rock drill always in the
operators sight line. Accurate automatic parallel holding
both in vertical and horizontal plane improves the drilling
performance and accuracy..
B 14 NV boom is a multi-purpose hydraulic boom for

mechanized tunnelling, drifting, cross-cutting and bolthole drilling in medium sections. It can also be used for
production drilling with cut-and-fill and room-and-pillar
methods.
This telescopic boom offer large true rectangular face
coverage area.
TECHNICAL DATA
Coverage
Weight, without hoses
Weight allowed
Boom lift, up and down
Boom swing, symmetric
Boom extension
Feed tilt, up and down
Feed angle, symmetric
Feed tilt, up and down
Feed extension
Feed roll-over
Large dimensioned rectangular profile,adjustable and

sealed boom extension wear-pieces, large diameter
bearings, sealed main joints, expanding pins in cylinder
joints and use of super strong cast pieces in most
stressed areas are some of the features that are
included to the boom design for improved reliability.
27 m
1 050 kg
1 000 kg
45 and 20
30
800 mm
20 and 90
95
20 and 90
1 400 mm
360

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
7849 3655 - B-24-10-2005 SR-CC-FL
80 (80)
QUASAR NV
TECHNICAL DATA
4-500 S-D
B 14 NV Boom
2004-09-02
COVERAGE AREAS
LONG HOLE DRILLING
5200
FACE DRILLING
4150
2600
4750
3400
5700
5500
4250
3200
2450
2300
CROSS-CUTTING
4100
2000
1650
2450
ROOF DRILLING
4100
GENERAL DIMENSIONS
up to 1400
20
45
90
170
95
360
20
up to 800
2320
36
95
95
36

Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80

Martillo Perforador X2

Uploaded by

Copyright:

Available Formats

Martillo Perforador X2

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Martillo Perforador X2

Uploaded by

Copyright:

Available Formats

What types of drilling is the equipment designed for?

What types of drilling is the equipment designed for?

What are the main components and features of the X2 rock drill?

What are the main components and features of the X2 rock drill?

71 (80)

7849 3655 - B-24-10-2005 SR-CC-FL

Martillo Perfrorador Series X2

The X2 hydraulic rock drill is designed for tunneling and

The X2 series is a hydraulic percussive rock drill with

Weight (w/o flushing head

H32 - H35 drifter rods

Length (w/o shank

Percussion hydraulic pressure 160-210 bar

The X2 L, designed for long hole drilling, equipped with :

SANDVIK TAMROCK SECOMA S.A.S.

7849 3655 - B-24-10-2005 SR-CC-FL

160 - 210 bar

Orbit type, 125 ccm

25 l/min (12 bar)

Working temperature (water flushing)

Orbit type, 200 ccm

SANDVIK TAMROCK SECOMA S.A.S., B.P. 46 - 69881 Meyzieu Cedex, France

SANDVIK TAMROCK SECOMA S.A.S.

7849 3655 - B-24-10-2005 SR-CC-FL

HIDRASTAR 200 Series Rock

The Hydrastar 200 hydraulic rock drill is designed for

bolt hole drilling

H25 - H28 drifter rods

The Hydrastar 200 is a hydraulic percussive rock drill

Weight (w/o flushing head

Length (w/o shank

The Hydrastar 200 is equipped with :

- a 125 cm direct mounted rotation motor,

Percussion hydraulic pressure 140 - 200 bar

SANDVIK TAMROCK SECOMA S.A.S.

7849 3655 - B-24-10-2005 SR-CC-FL

HYDRASTAR 200 Series Rock Drill

140 - 200 bar

Orbit type, 125 ccm

Hose fitting size

Continuous Use Limits

25 l/min (12 bar)

Working temperature (water flushing)

JIC 7/8 - 5/8

SANDVIK TAMROCK SECOMA S.A.S., B.P. 46 - 69881 Meyzieu Cedex, France

SANDVIK TAMROCK SECOMA S.A.S.

7849 3655 - B-24-10-2005 SR-CC-FL

NVTF Telescopic Feed

A series of multi-purpose telescopic drill feed capable to

The NVTF hydraulic cylinder telescopic feeds are made

NVTF feeds are designed for Tamrock Axera and

The carriage for rock drill have special wrap around

SANDVIK TAMROCK SECOMA S.A.S.

7849 3655 - B-24-10-2005 SR-CC-FL

NVTF Telescopic Feed

For Face Drilling

Rod length -B-

Total length -A-