Soal Baru

1. What does LED stand for?
A. Light Emitting Display

B. Low Energy Display
C. Light Emitting Diode
D. Light Emitting Detector
2. Name the three leads of a common transistor

A.
B.
C.
D.
Collector Bias Omitter

Base Collector Case
Emitter Collector Bias
Collector Base Emitter
3. Connecting a lead from the negative to the positive of a battery will produce:
A.
B.
C.
D.
A high resistance circuit

A short circuit
A low current path
An open circuit
4. What is the approximate characteristic voltage that develops across a red LED?
A.
B.
C.
D.
1.7v
3.4v
0.6v
5v
5. If two resistors are placed in series, is the final resistance:

A.
B.
C.
D.
Higher
Lower
The same
Cannot be determined
6. Which is not a "common" value of resistance:

A.
B.
C.
D.
2k7
1M8
330R
4k4
7. If a small value of capacitance is connected in parallel with a large value, the

combined capacitance will be:
A.
B.
C.
D.
The same
Higher
Lower
8. If the voltage on the base of a transistor increases, does it:

A.
B.
C.
D.
Turn on
Turn of
Not enough information
Remain the same
9. The resistor identified in brown is called the:
A.
B.
C.
D.
Base Bias Resistor

Load Resistor
Emitter Feedback Resistor
Bypass Resistor
10. A 100n capacitor in parallel with 100n produces:

A.
B.
C.
D.
90n
100n
200n
50n
11. A resistor with colour bands: red-red-red-gold, has the value:
A.
B.
C.
D.
22k 5%
2k2 5%
220R 5%
22R 5%
12. The lead marked with the arrow is:
A.
B.
C.
D.
The
The
The
The
Collector
Base
Emitter
case
13. A 10k resistor in parallel with 10k produces:

A.
B.
C.
D.
10k
5k
20k
100k
14. The symbol is:
A.
B.
C.
D.
NPN Transistor
PNP Transistor
Photo Transistor
Field Efect Transistor
15. Two 3v batteries are connected as shown.

The output voltage is:
A.
B.
C.
D.
3v
0v
6v
9v
16. 4 resistors in ascending order are:

A.
B.
C.
D.
22R 270k 2k2

4k7 10k 47R
3R3 4R7 22R
100R 10k 1M
1M
330k
5k6
3k3
17. The closest value for this combination is:
A.
B.
C.
D.
4k7
2k3
9k4
47k
18. This stage is called:
A.
B.
C.
D.
Common Base
Common Collector
Common Emitter
Emitter Follower
19. The four symbols are:
A.
B.
C.
D.
Capacitor, Microphone, Potentiometer, Electrolytic

Electrolytic, Microphone, Resistor, Capacitor
Capacitor, Piezo, Resistor, Electrolytic
Electrolytic, Coil, Resistor, Capacitor
20. The value of the combination is:
A.
B.
C.
D.
100n
200n
50n
10p
21. The resistor marked in black is:
Base Bias Resistor

A. Load Resistor
B. Emitter Feedback Resistor
C. Bypass Resistor
22. A resistor and capacitor in series is called a:
A.
B.
C.
D.
Pulse Circuit
Timing Circuit/Delay Circuit
Oscillator Circuit/Frequency Circuit
Schmitt Circuit
23. A red-red-red-gold resistor in series with an orange-orange-orange-gold resistor

produces:
A.
B.
C.
D.
5k5
35,200 ohms
55k
None of the above
24. Name the 4 components:
A.
B.
C.
D.
Photo transistor, switch, capacitor, coil

Transistor, mercury switch, piezo, coil
Photo transistor, reed switch, piezo, coil
Photo darlington transistor, reed switch, piezo, coil
25. To obtain a higher value of resistance, resistors are connected in:

A.
B.
C.
D.
Reverse
Forward
Parallel
Series
26. A capacitor and coil in parallel is called:
A.
B.
C.
D.
A
A
A
A
Tuned Circuit
Timing Circuit
Delay Circuit
Schmitt Circuit
27. When the base is raised, the emitter will:
A.
B.
C.
D.
Rise
Fall
Remain Fixed
Oscillate
28. What is 1,000p?

A.
B.
C.
D.
0.01n
0.0001u
0.1n
1n
29. The current in a circuit is 45mA. This is:

A.
B.
C.
D.
0.045Amp
0.00045A
0.0045A
0.45A
30. A 100n capacitor can be expressed as: (u = microfarad)
A.
B.
C.
D.
0.1u
0.01u
0.001u
none of the above
31. 1mA is equal to:

A.
B.
C.
D.
0.001A
0.00001A
0.01A
0.1A
32. 1,200mV is equal to:

A.
B.
C.
D.
12v
1.2v
0.12v
0.0012v
33. If a 10k resistor is placed across a 10v supply, the current will be:
A.
B.
C.
D.
10mA
1mA
0.01mA
0.1mA
34. This arrangement is called:
A.
B.
C.
D.
Common Emitter
Common Collector/Emitter Follower
Common Base
none of the above
35. Identify the correctly connected LED:
A.
B.
C.
D.
A
B
C
D
36. Identify the correct statement:
A.
B.
C.
D.
The
The
The
The
cathode
cathode
cathode
cathode
lead
lead
lead
lead
is
is
is
is
longer. It goes to the negative rail

shorter. It goes to the negative rail
shorter. It goes to the positive rail
longer. It goes to the positive rail
37. The current requirement of a LED is:

A.
B.
C.
D.
1.7mA
25mA
Between 3 and 35mA
65mA
38. The signal at the collector will be . . . . . . with the base.
A.
B.
C.
D.
Inverted . . .
In-phase . . .
None...
none of the above
39. The purpose of the capacitor:
A.
B.
C.
D.
To pass AC on the input to the base

To allow the transistor to self-bias
Block DC from the input line
To allow the stage to operate
40. The direction of conduction for a diode is:
A. A
B. B
C. C
D. none of the above
41. A DC voltage . . .
A.
B.
C.
D.
rises and falls

is a sinewave
remains constant
is an audio waveform
42. A CRO is a
A.
B.
C.
D.
Cathode Ray Oscillator

Cathode Ray Oscilloscope
Capacitor-Resistor Oscillator
Capacitor-Resistor Output
43. Doping of a semi conductor increases ____

A.
B.
C.
D.
Resistivity
Conductivity
Inductance
None
44. The tolerance bands: gold; silver; brown, represent:

A.
B.
C.
D.
10%, 5%, 1%
5%, 10%, 2%
5%, 10%, 1%
10%, 5%, 2%
45. 223 on a capacitor represents:

A.
B.
C.
D.
0.022u
22n
22,000p
All of the
u = microfarad
n = nanofarad
p = picofarad
above
46. Arrange these in ascending order: n, p, u
A.
B.
C.
D.
p, u, n,
n, u, p
p, n, u
All of the above
47. Name this symbol:
A.
B.
C.
D.
A
A
A
A
bufer
NOR gate
NAND gate
Schmitt Trigger
48. The number "104" on a capacitor indicates:

A.
B.
C.
D.
0.1u
100n
1n
10n
49. What is the multimeter detecting:
A.
B.
C.
D.
The
The
The
The
output voltage of the Schmitt Trigger

delay across the capacitor
voltage across the capacitor
current through the capacitor
50. For the NOR gate, what is the output when both inputs are HIGH:
A.
B.
C.
D.
HIGH
LOW
Can be HIGH or LOW

Soal Baru

Uploaded by

Copyright:

Available Formats

Soal Baru

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Soal Baru

Uploaded by

Copyright:

Available Formats

1. What does LED stand for?

A. Light Emitting Display

2. Name the three leads of a common transistor

Collector Bias Omitter

A high resistance circuit

5. If two resistors are placed in series, is the final resistance:

6. Which is not a "common" value of resistance:

7. If a small value of capacitance is connected in parallel with a large value, the

8. If the voltage on the base of a transistor increases, does it:

9. The resistor identified in brown is called the:

Base Bias Resistor

10. A 100n capacitor in parallel with 100n produces:

11. A resistor with colour bands: red-red-red-gold, has the value:

12. The lead marked with the arrow is:

13. A 10k resistor in parallel with 10k produces:

14. The symbol is:

15. Two 3v batteries are connected as shown.

16. 4 resistors in ascending order are:

22R 270k 2k2

17. The closest value for this combination is:

18. This stage is called:

19. The four symbols are:

Capacitor, Microphone, Potentiometer, Electrolytic

20. The value of the combination is:

21. The resistor marked in black is:

Base Bias Resistor

22. A resistor and capacitor in series is called a:

23. A red-red-red-gold resistor in series with an orange-orange-orange-gold resistor

24. Name the 4 components:

Photo transistor, switch, capacitor, coil

25. To obtain a higher value of resistance, resistors are connected in:

26. A capacitor and coil in parallel is called:

27. When the base is raised, the emitter will:

28. What is 1,000p?

29. The current in a circuit is 45mA. This is:

30. A 100n capacitor can be expressed as: (u = microfarad)

31. 1mA is equal to:

32. 1,200mV is equal to:

34. This arrangement is called:

35. Identify the correctly connected LED:

36. Identify the correct statement:

longer. It goes to the negative rail

37. The current requirement of a LED is:

38. The signal at the collector will be . . . . . . with the base.

39. The purpose of the capacitor:

To pass AC on the input to the base

40. The direction of conduction for a diode is:

rises and falls

Cathode Ray Oscillator

43. Doping of a semi conductor increases ____

44. The tolerance bands: gold; silver; brown, represent:

45. 223 on a capacitor represents:

46. Arrange these in ascending order: n, p, u

47. Name this symbol:

48. The number "104" on a capacitor indicates:

49. What is the multimeter detecting:

output voltage of the Schmitt Trigger

You might also like