Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
947 views

Linear Motion Lesson

1) The document discusses linear motion, including concepts like speed, velocity, distance, displacement, average speed, average velocity, acceleration, deceleration, and uniform acceleration. 2) Key definitions are provided for these terms, including mathematical equations. Examples are also given to demonstrate calculations related to linear motion. 3) Different types of linear motion are explored through diagrams of ticker tapes or tape charts, including motions with constant, increasing, decreasing, and zero acceleration.

Uploaded by

Salmizam Izam
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
947 views

Linear Motion Lesson

1) The document discusses linear motion, including concepts like speed, velocity, distance, displacement, average speed, average velocity, acceleration, deceleration, and uniform acceleration. 2) Key definitions are provided for these terms, including mathematical equations. Examples are also given to demonstrate calculations related to linear motion. 3) Different types of linear motion are explored through diagrams of ticker tapes or tape charts, including motions with constant, increasing, decreasing, and zero acceleration.

Uploaded by

Salmizam Izam
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

LESSON 1

LINEAR MOTION

Speed and Velocity ,v

Introduction

Speed is the rate of change of distance.


Speed = distance travelled
time taken

Linear motion is the motion a straight line and


the movement in a direction where forwards is positive
and backwards is negative.
Kinematics is the section of physics which studies the
motions of objects without considering the effects that
produce the motion. The study generally involves the
analysis of the position of an object in relation to time.
Dynamics is the section of physics which studies the
causes of motion of an object.

Average speed = total distance traveled


total time taken
Speed is a scalar quantity and the value always
positive.
The unif of speed is metre per second (m s-1)
Velocity is the rate of change of displacement.
Velocity = displacement
time taken
v=s
t
Average velocity = total displacement
total time taken

Distance ,d and Displacement, s


Distance ,d is how far a body travels during a motion
without considering any particular direction or the length
of the path of an object.
Distance is a scalar quantity and the value always
positive.
The unif of distance is metre (m)

Velocity is a vector quantity and the value can be


positive and negative depend on their directions.
The unif of velocity is metre per second (m s-1)

Displacement , s is distance traveled in a particular


direction.
Displacement ,s = final position initial position
Displacement is a vector quantity and the value can be
positive and negative depend on their directions.
The unif of dispacement is metre (m)

If an object moves in a circle with constant speed , it has


different velocities at different points along the circle
because the direction and hence the velocity of the object
is always changing as shown in the following diagram.

Diagram below shows the difference between distance


and displacement.

Acceleration,a and Decelaration(Retardation)


Acceleration is the rate of change of velocity.
Acceleration = change in velocity
time taken
Acceleration = final velocity initial velocity
time taken
a = v - u
t
Negative acceleration is called as deceleration
(retardation)
Acceleration is a vector quantity
The unif of acceleration or deceleration is
metre per second per second (ms-2)

Distance = Length of the road


Displacement = Length of the line AB
If the motion in a straight line and in one direction , the
magnitude of distance is same as the magnitude of
displacement .

29

Solution
Extra notes

Example 3

1
2
3
4
5

An object accelerates uniformly along a straight line from


a velocity of 10 m s-1 until 25 m s-1 in 5 s.
Calculate
(a)
the acceleration of the object
(b)
the velocity of the object during the first 10 s of
motion
(c)
the time taken to reach a final velocity 50 ms-1

6
7

uniform = constant = same


increasing velocity = acceleration
decreasing velocity (slow down) = deceleration
zero velocity = the object is stationary (at rest)
negative velocity = the object moves in opposite
direction
uniform velocity = zero acceleration
negative acceleration = deceleration
(retardation)

Solution
Example 1
A boy walks finish the following path AB.

Using a ticker timer to analysing the motion


Find
(a) total dinstance traveled
(b) displacement

A ticker timer is connected to an alternating electricity


supply (a.c.) and uses the mains electricity frequency of
50 Hz to make 50 ticks or vibrations every second.
1 tick is the time interval between one dot and the next
dot on the tape.
50 ticks = 1 s
1 tick = 0.02s

Solution

Example 4

Example 2

Based on the ticker tape above calculate


(a) time taken
(b) average volocity
Solution
Figure above shows runner runs 500 m towards east in
2 minutes and 1200m towards north in 4 minutes.
Calculate his
(a) average speed
(b) average velocity
30

(d)
The type of motion based on ticker tape or tape chart
(a)
The type of motion is
velocity

acceleration

(b)
The type of motion is
velocity

acceleration

(e)

The type of motion is


velocity

acceleration

(c)

The type of motion is


velocity

The type of motion is


velocity

acceleration

31

acceleration

Solution
Using Equations of Linear Motion with Uniform
Acceleration
The various equations of linear motions of an object
with uniform acceleration are given as follows:
v = u + at
s=

.(1)

u + v t ..(2)
2

s = ut + at2 ..(3)
v2 = u2 + 2as

..(4)

Where s :
u :...
v :...
a :
t :
Extra notes:

Example 12

moves from rest :


finally it stops/brakes:..
released from a height / fall freely from
rest :
thrown vertically upwards:..
at maximum height :.

A construction worker accidentally knocks a brick from a


building so that it falls in 4 s to the ground. Calculate
(a) the velocity of the brick as it hits the ground
(b) the distance fallen of the brick
Solution

Example 10
A car accelerates from rest to 25 m s-1 in 4 s.
Find the acceleration of the car.
Solution

Example 11
A bus accelerates uniformly along a straight line from a
velocity 20 ms-1 until 30 ms-1 in 5 s.
Calculate,
(a) the acceleration
(b) the total displacement travelled by the bus
32

TUTORIAL 1

A
C
E

1
A car moves with a constant velocity. The accelerationof
the car is
A
C
2

B
D

decreased
uniformly

0.60 s
0.32 s
0.20 s

B
D

0.44 s
0.30 s

Deceleration means the velocity of an object is


A
C

increased
zero

The frequency of a ticker timer is 50 Hz. The time


interval between two consecutive dots is

negative
increased

B
D

positive
decreased
Based on the figure above , calculate the average
velocity.

The following figure shows an object moves with a


constant speed 5 m s-1 in a circle.

A
C
E
8

0.2 ms-1
0.4 ms-1
0.5 ms-1

B
D

0.3 ms-1
0.5 ms-1

The following figure shows a tape chart.

The object is also moves with


A
B
C
4

an acceleration
zero acceleration
constant velocity

The figure shows a path of a moving object.

Based on figure , which of the following is true?

At the beginning of motion


A

If AB = 5m , BC = 5m and CD = 7m ,find the total


displacement of the object if it moves from A to D.
A
C
E
5

3m
13 m
20 m

B
D

7m
17 m

C
D

A tick on the ticker tapes is


A
B
C
D

the speed of the ticker timer


the frequency of the ticker timer
the dinstace between two consecutive dots
the time interval between two consecutive dots
33

the velocity
unchanged
the velocity
increases
the velocity
increases
the velocity
unchanged

At the end of motion


the acceleration
increases
the acceleration
increases
the acceleration
unchanged
the acceleration
unchanged

Which of the following shows an object moving with


decreasing acceleration ?

(a) Describe the type of motion is shown in the tape


chart.
...........................................................................................
...........................................................................................
(b) What is the time interval between two consecutive
dots ?
...........................................................................................
(c) Calculate
(i) the minimum velocity
(ii)

the maximum velocity

(iii) the average velocity.


10

A cyclist riding at a velocity 8 ms-1 and is accelerating


with 4 ms-2 . What is the velocity of the cyclist after 5 s .
A
C
E

11

B
D

20ms-1
28 ms-1

13

the acceleration.

Each figure below shows two positions of a student on a


swing. The initial position in each figure is different.

A car starts from rest and accelerates uniformly and


after travels at distance 45m the velocity of the car is
20 ms-1 . What is the time taken?
A
C
E

12

16 ms-1
24 ms-1
32 ms-1

(iv)

4.5 s
13.5 s
22.4 s

B
D

9.0 s
18.0 s

Observe the positions of each of the swing in each


diagram and the appearance of the student when she
swings.
Based on the observations:

The following figure shows a tape chart . The chart is


produced by the motion of a trolly.The ticker timer used a
supply voltage 12 V a.c. at 50 Hz.

(a) State one suitable inference that can be made.


(b) State one appropriate hypothesis for an
investigation.
(c) With the use of apparatus such as trolley, ticker
timer and other apparatus , describe an
experimental framework to test your hypothesis.
In your description , state clearly the following:
(i) Aim of the experiment
(ii) Variables in the experiment
(iii) List of apparatus and materials
(iv) Arrangement of the apparatus
(v)
The procedure of the experiment which
include the method of controlling the
manipulated variable and the method of
measuring the responding variable.
(vi) Way you would tabulate the data
(vii) Way you would analysis the data
34

You might also like