Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
333 views4 pages

Asco Ah2d v710

Uploaded by

John Urdaneta

Asco valve solenoid

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Asco Ah2d v710

Uploaded by

John Urdaneta
333 views4 pages
Asco valve solenoid

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

Asco valve solenoid

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
333 views4 pages

Asco Ah2d v710

Uploaded by

John Urdaneta
Asco valve solenoid

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 4

On/Off Watertight

Hydramotor Actuator

For use withV710 Gas Valve Body

SERIES

AH2D

General Description
The AH2 Hydramotors are push-type, self-contained, electrohydraulic linear actuators which extend when powered and retract
by spring force upon power interruption.
AH2 Hydramotors provide a fast spring return shutoff time of one
second or less. When the actuator is mounted to a V710 gas
valve, position indicators on both sides of the actuator show the
open or closed position of the valve.
The AH2 Hydramotor/V710 gas valve combination provides reliable
main line gas control for a wide range of applications, including
boilers, furnaces, ovens and all types of industrial and commercial
burners. It is available in either a slow or fast opening construction.

Specifications:
Power Requirement: 220 VA max.
Closing Time: One second max.

Series AH2D Hydramotor with V710 valve body.

Opening Time:
Fast Opening: 14 seconds max.
Slow Opening: 26 seconds max.

Installation:

Note: Opening time is double between -30F and -40F ambient.


Opening time increased 20% when operating on 50Hz.

Enclosure:
Type 1, 2, 3, 3S, 4, 12, and 13 Combination General Purpose, Watertight,
Dusttight and Driptight.

Ambient Temperature:

AH2 Hydramotor mounts in any position


directly to a V710 valve with 4 set screws.

Damper Arm Rating:


Drives damper in one direction only. 20 lb. max. at
2.85" radius at 20F to 150F and 10 lb. max. at
-40F to 20F.

-40F to 150F (-40C to 66C)

Electrical:

Approvals:

Actuator:
Standard voltages:
24, 120, 240 volts, AC, 60 Hz (or 110,
220 volts AC, 50 Hz)

AH2 Hydramotor with V710 valve.

Proof of Closure Switch: (optional)


A factory set, non-field adjustable SPDT switch. 1800VA max. connected
load (e.g. one 15A load @ 120V or two 3.75A loads @ 240V).

CSA Certified to:


1) Automatic Gas Valves Z21.21 (6.5), File 109157
and 113070.
2) Automatic Gas Safety Shutoff Valves C/I (3.9),
File 113070.

Auxiliary Switches: (optional)


One or two integral SPDT switches; field adjustable to actuate at any
position of stroke. 1800 VA max.
connected load (e.g. one 15A load @ 120V or two 3.75A loads @ 240V).

Electrical Characteristics
Amperes
Voltage
24V

Inrush
28

Opening
8.00

Holding
0.73

120V

5.6

1.85

0.11

240V

2.8

0.92

0.05

File # MP932, Vol. 17, Sec. 3;


Safety Valves

JI 3000606
Gas Safety Shut-off Valves

Ordering Information:
Important: Order by Catalogue Number and add suffix
number for desired optional feature.
e.g. AH2D112A5

33

2/2

SERIES

AH2D

Specifications
Applications
On-Off Slow Opening (14 to 26 seconds)

24 V

Catalogue Number
120 V

240 V

Standard on-off

AH2D101A

AH2D102A

AH2D104A

Proof of closure

AH2D101S

AH2D102S

AH2D104S

Standard on-off

AH2D111A

AH2D112A

AH2D114A

Proof of closure

AH2D111S

AH2D112S

AH2D114S

On-Off Fast Opening (6 to 14 seconds)

Optional Features:
(add appropriate suffix number to catalogue number)
One Auxiliary Switch (add suffix 2)
Spring Return Damper Arm (add suffix 3)
Damper Shaft & Arm (add suffix 4)
Damper Shaft, Arm & one Auxiliary Switch, (add suffix 5)
Manual Reset (add suffix R)

Dimensions: inches

34

2-Way Normally Closed

V710 Valve Body


Pipe Sizes 3/4" to 3" NPT, 4" Flange

SERIES

V710

General Description
These 2 way normally closed globe type valve bodies are designed
for on/off or proportional control of commecial or industrial gas
burners. The V710 is designed exclusively for use with the AH
Hydramotor actuator. The AH Hydramotor valve consists of two
assemblies; the valve body and the AH Hydramotor actuator.
The V710 is a Push-to-Open valve which opens when the valve
stem is depressed by an AH Hydramotor actuator. An internal
return spring closes the valve when the Hydramotor actuator is
de-energized.

Model Types:
Quick Opening Trim: (Standard)
For applications where metered flow control is not required.
Quick Opening w/Valve Seal Overtravel Trim: (Suffix V22)
For any on-off application where the user, code or approval agency
requires a valve seal overtravel arrangement.
Linear Trim: (Suffix V15)
For applications that require flow control, such as slow opening, low
fire turn down, or proportional control.
Linear w/Valve Seal Overtravel Trim: (Suffix V25)
For applications where both valve seal overtravel and flow control are
required. (Not available in 4" flange size.)

Specifications:
Pressure Taps:
Two 1/4" NPT downstream, two 1/4" NPT upstream.
Fluid: Fuel Gas

Series V710 Valve Body with AH Hydramotor

Installation:
V710 valve body mounts in any position
directly to AH2, AH4, AH8 Hydramotor actuator.

Approvals:
V710 valve with AH Hydramotor.

File # MP932, Vol. 17, Sec. 3;


Safety Valves
CSA Certified to:
1) Automatic Gas Valves Z21.21 (6.5), File 109157
and 113070.
2) Automatic Gas Safety Shutoff Valves C/I (3.9),
File 113070.

Valve Parts in Contact with Fluid:


Body: 3/4" to 3" NPT, Die-cast aluminum, 4" Flange - cast iron
Bonnet: Die-cast aluminum
Seals: Nitrile
Springs: Zinc-plated music wire
Stem Bushing: Delrin
Valve Stem: 303 s.s.
Retaining Pin: 303 s.s.
Retaining Ring: 17-7 s.s.
Pipe Plugs: Zinc-plated steel

JI 3000606
Gas Safety Shut-off Valves

Ordering Information:
Important: Order by Catalogue Number.
e.g. V710EASV22

Seal Ring: Teflon (models with overtravel)


Closeoff Pressure: 25 psi maximum

39

SERIES

V710

Specifications
Operating Pressure
Differential (psi)
Pipe
Min. Cv
Min.
Size
Flow
Gas Capacity*
(ins.)
Factor
Btu/hr
Normally Closed (Closed when released)
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4

12
17
25
30
64
75
92
180

665,000
960,000
1,406,000
1,717,000
3,620,000
4,250,000
5,230,000
10,200,000

Fluid & Ambient


Temp.F

Min.

Max.

Min.

Max.

Quick
Opening Trim

0
0
0
0
0
0
0
0

15
15
15
15
10
10
10
15

-40
-40
-40
-40
-40
-40
-40
-40

150
150
150
150
150
150
150
150

V710EAS
V710FAS
V710GAS
V710HAS
V710JAS
V710KAS
V710LAS
V710NCF

Catalogue Numbers
Quick Opening
w/Valve Seal
Linear
Overtravel Trim
Trim
V710EASV22
V710FASV22
V710GASV22
V710HASV22
V710JASV22
V710KASV22
V710LASV22
V710NCFV22

V710EASV15
V710FASV15
V710GASV15
V710HASV15
V710JASV15
V710KASV15
V710LASV15
V710NCFV15

Linear
w/ValveSeal
OvertravelTrim
V710EASV25
V710FASV25
V710GASV25
V710HASV25
V710JASV25
V710KASV25
V710LASV25
N/A

* 1" W. C. Drop @ 2" W. C. Inlet Pressure, 1,000 Btu/Cu. Ft or more, 0.64 Spec. Grav. Gas

Trim Types

Quick Opening Trim


(Standard)

Quick Opening with


Valve Seal Overtravel Trim
Suffix V22

Linear Trim
Suffix V15

Linear with
Valve Seal Overtravel Trim
Suffix V25

Dimensions: inches

3/4" - 3" NPT

Pipe
Size
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4

A
5.78
5.78
5.78
5.78
8.12
9.00
9.00
13.88

B
1.95
1.95
2.01
2.01
2.66
2.96
2.96
5.00

C
2.64
2.64
2.94
2.94
3.05
3.87
3.87
7.40

D
5.19
5.19
5.19
5.19
8.01
8.01
8.01
9.00

4" FLANGE

40

E
1.16
1.16
0.70
0.70
0.96
0.70
0.70
0.00

Shipping
Weight (lbs.)
4.0
4.0
4.2
4.2
9.5
13
12
100

You might also like