The CKZ-500 lathe has a maximum turning diameter of 630mm and can machine parts up to 85mm in diameter. It features rolling ways in the X and Z axes for high feed rates and a quick turret and powerful motors to reduce machining times. Absolute encoders on the X and Z axes eliminate the need for re-homing after powering on. The lathe is controlled by a Siemens Sinumerik 802D/810D/840D system and can be customized to meet customer needs.
The CKZ-500 lathe has a maximum turning diameter of 630mm and can machine parts up to 85mm in diameter. It features rolling ways in the X and Z axes for high feed rates and a quick turret and powerful motors to reduce machining times. Absolute encoders on the X and Z axes eliminate the need for re-homing after powering on. The lathe is controlled by a Siemens Sinumerik 802D/810D/840D system and can be customized to meet customer needs.
The CKZ-500 lathe has a maximum turning diameter of 630mm and can machine parts up to 85mm in diameter. It features rolling ways in the X and Z axes for high feed rates and a quick turret and powerful motors to reduce machining times. Absolute encoders on the X and Z axes eliminate the need for re-homing after powering on. The lathe is controlled by a Siemens Sinumerik 802D/810D/840D system and can be customized to meet customer needs.
The CKZ-500 lathe has a maximum turning diameter of 630mm and can machine parts up to 85mm in diameter. It features rolling ways in the X and Z axes for high feed rates and a quick turret and powerful motors to reduce machining times. Absolute encoders on the X and Z axes eliminate the need for re-homing after powering on. The lathe is controlled by a Siemens Sinumerik 802D/810D/840D system and can be customized to meet customer needs.
Lathe CKZ-500 is precise numerically controlled machine designed for accurate and highly efficient machining of details of maximal diameter 630 mm or parts from the rod with maximal diameter 85 mm, Rolling ways in axes X and Z allow to reach high setting speed, Quick hydraulic turret Sauter and applied engines of high dynamics enable shortening of the time from chip to chip, Absolute converters in axes X and Z enable avoiding of necessity of each axle basing after lathe turning on, Precise spindle with direct drive by the means of belt transmission, The newest generation of control SIEMENS - SINUMERIK 802D/810D/840D, Reach special equipment enabling configuration of the lathe according the customers needs.
MACHINING PARAMETERS Maximal diameter of turning (mm) Maximal diameter of turning over cross slide (mm) Maximal diameter of passage over housing of bed (mm) Maximal working travel of cross slide (mm) Maximal turning length (mm) MAIN DRIVE Power of main drive engine (KW) Maximal spindle rotations (rot./min) Nominal moment of the spindle (Nm) Maximal moment during work S2 (Nm) Ratio between engine and spindle Cylindrical end of the spindle (mm) Spindle passage (mm) Maximal diameter of the rod COMPOUND SLIDE Working travel in Z axial (mm) Z axial turning screw (mm) Engine normal moment of Z axial (Nm) Maximal engine rotations of Z axial (rot./min) Fast travelling in Z axial (m/min) Working travel in X axial (mm) X axial turning screw (mm) Engine normal moment of X axial (Nm) Maximal engine rotations of X axial (rot./min) Fast travelling in X axial (m/min) TAIL-STOCK WITH HYDRAULIC PINOLA AS AXLE - OPTION Pinola diameter (mm) Pinola cone Pinola move (mm) Pressure (KG) Speed of tail-stock movement (m/min) MACHINE TURRET Number of positions Kind of face plate seat (mm) Section of cutting tool handle Time for rotation by one position (mm) DIMENSIONS Length (mm) Width (mm) Height (mm) INSTALLED POWER KW
Standard Equipment 630 500 680 320 700/1.200 21,5 3.500 410 570 1:1 220 95 85 720 50 x 10 27 3.000 30 320 50 x 10 27 3.000 30
- Hydraulic cylinder impassable
- Three-jaw chuck 315 - Turret with 12 positions without driven tools - Chips conveyor - High-pressure cooling system - Lightening of working area - SINUMERIK 802D control system - Technical and working documentation - Documentation of control system in German language - CE signs Special Equipment -
Tail-stock with hydraulic pinola as axle
Turret with driven tools Turret with Y axle ( 55 mm) Sleeve chuck Sleeves for chuck Rotational centre of a lathe Semiautomatic rests Centre of a lathe for tail-stock
