Siemens AG 2010

SINAMICS S120 drive system

System overview

Overview
With its separate power units and Control Units, the SINAMICS
S120 drive system can be perfectly adapted to a wide variety of
different drive tasks.

Control Units

For further information about STARTER and SCOUT, see

Engineering software and chapter SIMOTION Motion Control
System.
Power Modules
The stand alone version of a SINAMICS S120 drive system consists of a CU310 Control Unit and a Power Module. A mains rectifier, a voltage-source DC link and an inverter for supplying a
motor are integrated in the Power Module.

CU310 DP, CU320-2 DP and SIMOTION D4x5 Control Units

CU310 DP and CU310 PN Control Unit

CU310 Control Units are designed to control a single drive. They
feature as standard a PROFIBUS interface (CU310 DP) or
PROFINET interface (CU310 PN) and a TTL/HTL encoder
evaluation circuit.
CU320-2 Control Unit
The CU320-2 Control Unit has been designed to control multiple
drives. A CU320-2 is capable of operating up to
12 drives in V/f control mode or
6 drives in Servo or Vector control mode.
The CU320-2 Control Unit can be used to control a group of
single drives and implement basic drive technology functions.
SIMOTION D Control Units
A SIMOTION D Control Unit is used for applications requiring coordinated motion control such as synchronous operation, electronic gear, cam disk or complex technology functions.
SIMOTION D Control Units are available in a range of performance variants:
SIMOTION D410 for controlling 1 axis
SIMOTION D425 for controlling up to 16 axes
SIMOTION D435 for controlling up to 32 axes
SIMOTION D445-1 for controlling up to 64 axes

3/4

Siemens PM 21 2011

Power Module in blocksize format with CU310 DP Control Unit

Control
Unit

DRIVE-CLiQ

~
~

M
3~

Power
Module
G_D211_XX_00042

The Control Unit is selected according to the number of drives to

be controlled and the required performance level, while the
power unit must be rated to meet the energy requirements of
the system. The connection between the Control Unit and power
unit is made very simply using the digital system interface
DRIVE-CLiQ.

The STARTER commissioning tool is used to commission and

diagnose the various types of SINAMICS drives through the
Control Units. The SCOUT engineering system, which includes
the STARTER tool, is required for SIMOTION D Control Units.

Power Modules are designed for single drives which are not capable of regenerating energy to the supply. Generated energy
produced during braking can be converted to heat via braking
resistors.
Power Modules can also be operated by a CU320-2 DP or a
SIMOTION D4x5 Control Unit, e.g. in configurations where a
single drive is added to a multi-axis drive grouping. In this case,
the power modules of the blocksize construction form must be
equipped with the CUA31/CUA32 Control Unit adapter. This is
connected with the CU320-2 DP or SIMOTION D4x5 Control Unit
using DRIVE-CLiQ. Power Modules in chassis format can be directly connected to the mullti-axis Control Unit using a
DRIVE-CLiQ cable.

 Siemens AG 2010

SINAMICS S120 drive system

System overview

Overview (continued)
Motor Modules

Line Modules

A voltage-source DC link and an inverter for supplying a motor

are integrated in the Motor Module.

Line Modules generate a DC voltage from the AC line voltage

and supply Motor Modules with energy via the voltage-source
DC link.
Basic Line Modules
Basic Line Modules are designed only for infeed operation, i.e.
they are not capable of recovering regenerative energy to the
supply system. If regenerative energy is produced, e.g. when
drives brake, it must be converted to heat by means of a Braking
Module and a braking resistor. When a Basic Line Module is
used as the infeed, the matching line reactor must be installed.
A line filter can be installed optionally to restrict conducted interference to Class C2 limits (EN 61800-3).

Switch disconnector
and fuses or
circuit-breaker

Line filter

Line
reactor

Basic Line
Module

...

Motor
Module

CU320-2 Control Unit, Line Module and three Motor Modules in booksize
format

G_D211_EN_00032a

Line
contactor

M
3

Smart Line Modules

DRIVE-CLiQ

Control
Unit

Smart Line Modules can supply energy and return regenerative

energy to the supply system. A Braking Module and braking resistor are required only if the drives need to be decelerated in a
controlled manner after a power failure (i.e. when energy cannot
be recovered to the supply). When a Smart Line Module is used
as the infeed, the matching line reactor must be installed. A line
filter can be installed optionally to restrict conducted interference to Class C2 limits (EN 61800-3).

=
~
M
3~

Motor
Modules

=
~
M
3~

Switch
disconnector
and fuses

Line
reactor

Smart Line
Module

...

Line
contactor

Motor Modules are designed for multi-axis drive systems and are
controlled by either a CU320-2 or a SIMOTION D4x5 Control
Unit. Motor Modules are interconnected by means of a shared
DC busbar. Since the Motor Modules have a common DC link,
they can exchange energy with one another, i.e. if one Motor
Module operating in generator mode produces energy, the
energy can be used by another Motor Module operating in motor
mode. The voltage-source DC link is supplied with main line
voltage by a Line Module.

Line
filter

Motor
Module

M
3

Siemens PM 21 2011

G_D211_EN_00033

G_D211_XX_00043

Line
Module

3/5

 Siemens AG 2010

SINAMICS S120 drive system

System overview

Overview (continued)
Cooling methods

Active Line Modules can supply energy and return regenerative

energy to the supply system. A Braking Module and braking resistor are required only if the drives need to be decelerated in a
controlled manner after a power failure (i.e. when energy cannot
be recovered to the supply). In contrast to Basic Line Modules
and Smart Line Modules, however, Active Line Modules generate a regulated DC voltage which remains constant despite fluctuations in the line voltage. In this case, the line voltage must remain within the permissible tolerance range. Active Line
Modules draw a virtually sinusoidal current from the supply
which limits any harmful harmonics.

Depending on the frame size there are several cooling options:

In order to operate an Active Line Module, it is absolutely essential to use the Active Interface Module for the appropriate rating.

Switch disconnector
and fuses or
circuit-breaker

internal
air cooling

Active Interface Active Line

Module
Module

external
air cooling

cold-plate
cooling

liquid
cooling
G_D211_EN_00044a

...

Motor
Module

M
3

G_D211_EN_00035a

Active Line Modules

Please refer to chapter System description Dimensioning

for more information about designing a drive system with
SINAMICS S120.
Power Modules, Motor Modules and Line Modules are available
in booksize, booksize compact, blocksize and chassis format:
Power Modules in blocksize and chassis,
Motor Modules and Line Modules in booksize, booksize compact and chassis formats.

Internal air cooling

In this standard solution, the power loss from the electronics and
power units of the drive components is removed by natural cooling or by a forced-ventilation system and routed to the interior of
the control cabinet.
External air cooling
External air cooling uses the "through-hole" method. The components power unit heat sinks pass through the mounting surface
in the control cabinet and can thus release the heat losses of the
power circuit to a separate external cooling circuit. The only heat
loss that remains in the cabinet is emitted by the electronics. Degree of protection IP54 can be achieved at this "mechanical interface". The heat sink, with its cooling fins and the fan unit (part
of the scope of supply), protrudes through the back into a separate ventilation area, which can also open outwards.
Cold plate cooling
Units designed with cold plate cooling can pass the power unit
heat losses to an external heat sink via a thermal interface on the
units rear panel. This external heat sink is water-cooled, for example.
Liquid cooling
On liquid-cooled units, the power semiconductors are mounted
on a heat sink through which the cooling medium flows. Most of
the heat produced by the unit is absorbed by the cooling medium and can be dissipated outside the control cabinet.

3/6

Siemens PM 21 2011

 Siemens AG 2010

SINAMICS S120 drive system

System overview

Overview (continued)
Customized application

Varnished modules

The devices can be purchased in the different formats as a complete system solution. The user profits from the know-how of the
drive specialists and no longer has to consider the thermal design of the application. Especially in applications with devices
that use cold plate cooling, external air cooling and liquidcooled devices in chassis format, the user obtains a technically
reliable solution and saves time on engineering. The system solution ranges, for example, from a drive line-up in booksize format with cold plate cooling completely installed on a common
cooling plate through to complete control cabinets with a cooling
system and temperature/condensation control.

The following units are equipped as standard with varnished or

partially varnished modules:
Blocksize format units
Booksize format units
Chassis format units
Control Units (except for SIMOTION D445-1)
Sensor Modules
Terminal Modules

Further information is available from the Siemens branch offices.

Energy efficiency
The SINAMICS S120 drive system saves energy by recovering
energy from the axes and using it within the DC link group of a
multi-axis configuration and by feeding it back into the supply
system. Even at full infeed capacity, no unnecessary heat is
generated in the control cabinet.
Because the Active Line Modules prevent capacitive and inductive reactive currents, SINAMICS S120 also ensures that no unnecessary power losses occur in the power supply and that no
current harmonics occur. This not only prevents detrimental effects on other loads, but it also reduces the heat generated in the
control cabinet.

The varnish coating protects the sensitive SMD components

against corrosive gases, chemically active dust and moisture.
The selection of Control Unit and Power section defines the
structure of the drive system. The range of system components
provided allows optimum adaptation of the drive system to the
application.
System components
System components are divided into the following categories:
DC link components
e.g. Braking Modules and braking resistors
Power components on the output side
e.g. motor reactors
Supplementary system components
e.g. Terminal Modules, Operator Panel and communication
boards
Encoder system connection
for connecting various types of encoders to SINAMICS S120

Siemens PM 21 2011

3/7

 Siemens AG 2010

SINAMICS S120 drive system

System overview

Overview (continued)

Booksize format

Blocksize format

Booksize format units are optimized for multi-axis applications

and are mounted adjacent to one another. The connection for the
shared voltage-source DC link is an integral feature. The booksize format offers the full range of cooling options: Internal air
cooling, external air cooling, cold plate cooling and liquid cooling in some cases.

Blocksize format units are optimized for single-axis applications

and are available only as Power Modules.
The CU310 Control Unit can be snapped onto them directly. The
units are cooled by internal air cooling or liquid cooling.

Chassis format
Booksize compact format
Derived from the booksize format we developed the booksize
compact format for machines with particularly high requirements
for the compactness of their drives. The booksize compact format combines all benefits of the booksize format and provides
the same performance with an even smaller overall height and
an extended overload capability. The booksize compact format
is thus particularly well suitable for integration into machines with
high dynamic requirements and confined installation conditions.

The booksize compact format has the same design for the cooling methods of internal air cooling and cold plate cooling.

3/8

Siemens PM 21 2011

Higher-output units (approximately 100 kW (150 HP) and above)

are constructed in chassis format. These are available as Line
Modules, Power Modules and Motor Modules. Chassis format
units are cooled by an internal air cooling circuit. For special applications, e.g. for extrusion or marine applications, liquidcooled devices can be ordered. The CU310 Control Unit can be
integrated in the Power Modules.

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

Design
The status of the Motor Modules is indicated via two multi-color
LEDs.
The motor cable shield is inside the connector on 50 mm
(1.97 in) and 100 mm (3.94 in) wide modules. A shield
connection plate can be supplied for 150 mm (5.91 in), 200 mm
(7.87 in) and 300 mm (11.81 in) wide motor modules. On these
modules, the motor cable shield can be connected using a tube
clip.
The signal cable shield can be connected to the Motor Module
by means of a shield connection terminal, e.g. Weidmller type
KLB 3-8 SC.

The Single Motor Modules in booksize format feature the following connections and interfaces as standard:
2 DC link connections via integrated DC link busbars
1 electronics power supply connection via integrated 24 V DC
bars
3 DRIVE-CLiQ sockets
1 motor connection, plug-in (not included in scope of supply)
or screw-stud depending on rated output current
1 safe standstill input (enable pulses)
1 safe motor brake control
1 temperature sensor input (KTY84-130 or PTC)
2 PE (protective earth) connections

The scope of supply of the Motor Modules includes:

DRIVE-CLiQ cable (length depends on module width) to
connect Motor Module to adjacent Motor Module, length =
motor module width + 0.06 m (2.4 in)
Jumper for connecting the 24 V DC busbar to the adjacent
Motor Module
Connector X21
Connector X11 for the motor brake connection (for
Motor Modules with a rated output current of 45 A to 200 A)
2 blanking plugs for sealing unused DRIVE-CLiQ sockets
Fan insert for the 132 A and 200 A Motor Modules (the voltage
for the fan insert is supplied by the Motor Module)
1 set of warning signs in foreign languages
1 heat conducting foil
(for Motor Modules with cold plate cooling only)

Siemens PM 21 2011

3/151

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

Integration
Single Motor Modules communicate with the Control Unit via DRIVE-CLiQ.

1
DRIVE-CLiQ socket

Single Motor Module

X201

DRIVE-CLiQ socket

X200

DCP

DCP

DCN

DCN

24 V DC busbars

DC link busbars

X202
DRIVE-CLiQ socket

X21

2)

+Temp

-Temp

EP +24 V

EP M1

X1
U2
V2
W2
M

1)
LEDs

3)
READY
DC LINK

G_D212_EN_00032g

1) Required for Safety.

2) Temperature sensor terminal for motors without DRIVE-CLiQ interface.
3) The braking signal has an integrated overvoltage protection.
An external circuit of the holding brake is not necessary.

Connection example of Single Motor Modules in booksize format 3 A to 30 A

3/152

Siemens PM 21 2011

BR+
BR-

M
3~

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

X201
DRIVE-CLiQ socket 1

Single Motor Module

X200
DRIVE-CLiQ socket 0

Integration (continued)

DCP

DCP

DCN

DCN

24 V DC busbars

DC link busbars

X21

2)

+Temp

-Temp

EP +24 V

EP M1

X202
DRIVE-CLiQ socket 2

E
M

U2
V2
W2

1)

X12
1
2

X11
+
-

Fan

LEDs

5)

M
3~

READY

3)

BR+
BR-

1
2

DC LINK
4)

G_D212_EN_00033g

1) Required for Safety.

2) Temperature sensor terminal for motors without DRIVE-CLiQ interface.
3) The braking signal has an integrated overvoltage protection.
An external circuit of the holding brake is not necessary.
4) Contacting via shield plate.
5) Fan insert for 132 A and 200 A Single Motor Modules.
The fan insert is supplied with the Single Motor Module.

Connection example of Single Motor Modules in booksize format 45 A to 200 A

Siemens PM 21 2011

3/153

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

Technical specifications
Single Motor Module in booksize format
6SL312...
DC link voltage
(up to 2000 m (6562 ft) above sea level)

510 ... 720 V DC

(line voltage 380 ... 480 V 3 AC) 1)

Output frequency

Control type Servo

0 650 Hz 2)

Control type Vector

0 300 Hz 2)

Control type V/f

0 600 Hz 2)

Electronics power supply

24 V DC -15 %/+20 %

Type of cooling

- Internal air cooling, external air cooling

Power units with forced air cooling by built-in fans
- Cold plate cooling

Permissible ambient and coolant temperature (air)

during operation for line-side components,
Line Modules and Motor Modules

0 40 C (32 104 F) without derating,

> 40 55 C (104 131 F) see derating characteristics

Installation altitude

Up to 1000 m (3281 ft) above sea level without derating,

> 1000 ... 4000 m (3281 ... 13124 ft) above sea level, see derating
characteristics

Conformity

CE (low-voltage and EMC Directives)

Approvals, according to

cULus

Safety Integrated

Safety Integrity Level 2 (SIL2) acc. to IEC 61508, Performance Level d

(PLd) acc. to ISO 13849-1 and Control Category 3 acc. to ISO 13849-1 or
EN 954-1
For further information see chapter Safety Integrated.

1)

3 A ... 85 A Single Motor Modules with firmware version V2.5 and higher with appropriate parameterization and reduced power rating also operable on
200 ... 240 V 3 AC networks in accordance with a DC link voltage of 270 ... 360 V DC.

2)

Note the correlation between max. output frequency, pulse frequency and current derating.
For further information see chapter System description Dimensioning.

3/154

Siemens PM 21 2011

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

Technical specifications (continued)

DC link voltage 510 720 V DC

Single Motor Module in booksize format

Internal air cooling

6SL3120-

1TE13-0AA3

1TE15-0AA3

1TE21-0AA3

1TE21-8AA3

1TE23-0AA3

External air cooling

6SL3121-

1TE13-0AA3

1TE15-0AA3

1TE21-0AA3

1TE21-8AA3

1TE23-0AA3

Cold plate cooling

6SL3126-

1TE13-0AA3

1TE15-0AA3

1TE21-0AA3

1TE21-8AA3

1TE23-0AA3

Output current
Rated current Irated
Base-load current IH
For S6 duty (40 %) IS6
Imax

A
A
A
A

3
2.6
3.5
6

5
4.3
6
10

9
7.7
10
18

18
15.3
24
36

30
25.5
40
56

Type rating 1)
Based on Irated
Based on IH

kW (HP)
kW (HP)

1.6 (1.5)
1.4 (1)

2.7 (3)
2.3 (2.5)

4.8 (5)
4.1 (5)

9.7 (10)
8.2 (10)

16.0 (20)
13.7 (18)

Rated pulse frequency

kHz

DC link current Id 2)

3.6

11

22

36

Current carrying capacity

DC link busbars
24 V DC busbars 3)

A
A

100
20

100
20

100
20

100
20

100
20

DC link capacitance

110

110

110

220

705

Current requirement
At 24 V DC, max.

0.85

0.85

0.85

0.85

0.9

kW

0.05

0.07

0.1

0.19

0.31

0.035/0.015

0.04/0.03

0.055/0.045

0.1/0.09

0.1/0.21

dB

0.008 (0.3)
< 60

0.008 (0.3)
< 60

0.008 (0.3)
< 60

0.008 (0.3)
< 60

0.016 (0.6)
< 60

kW
K/W

0.025/0.02
0.175

0.035/0.035
0.175

0.045/0.05
0.175

0.08/0.1
0.175

0.085/0.22
0.075

Motor connection
U2, V2, W2

Connector (X1) 5),

max. 30 A

Connector (X1) 5),

max. 30 A

Connector (X1) 5),

max. 30 A

Connector (X1) 5),

max. 30 A

Connector (X1) 5),

max. 30 A

Shield connection

Integrated in
connector (X1)

Integrated in
connector (X1)

Integrated in
connector (X1)

Integrated in
connector (X1)

Integrated in
connector (X1)

PE connection

M5 screw

M5 screw

M5 screw

M5 screw

M5 screw

Motor brake connection

Integrated into the

plug-in motor
connector (X1),
24 V DC, 2 A

Integrated into the

plug-in motor
connector (X1),
24 V DC, 2 A

Integrated into the

plug-in motor
connector (X1),
24 V DC, 2 A

Integrated into the

plug-in motor
connector (X1),
24 V DC, 2 A

Integrated into the

plug-in motor
connector (X1),
24 V DC, 2 A

50 /75 (164/246)

50 /75 (164/246)

50 /75 (164/246)

70/100 (230/328)

100/150 (328/492)

IP20

IP20

IP20

IP20

IP20

mm (in)
mm (in)

50 (1.97)
380 (14.96)

50 (1.97)
380 (14.96)

50 (1.97)
380 (14.96)

50 (1.97)
380 (14.96)

100 (3.94)
380 (14.96)

mm (in)
mm (in)
mm (in)

270 (10.63)
226/66.5
(8.90/2.63)
226 (8.90)

270 (10.63)
226/66.5
(8.90/2.63)
226 (8.90)

270 (10.63)
226/66.5
(8.90/2.63)
226 (8.90)

270 (10.63)
226/66.5
(8.90/2.63)
226 (8.90)

270 (10.63)
226/66.5
(8.90/2.63)
226 (8.90)

kg (lb)
kg (lb)
kg (lb)

5.0 (11.0)
5.7 (12.6)
4.2 (9.26)

5.0 (11.0)
5.7 (12.6)
4.2 (9.26)

5.0 (11.0)
5.7 (12.6)
4.5 (9.92)

5.0 (11.0)
5.7 (12.6)
4.5 (9.92)

6.9 (15.2)
8.5 (18.7)
6.1 (13.5)

Internal/external air cooling

Power loss 4)
- With internal air cooling in
control cabinet
- With external air cooling,
int./ext.
Cooling air requirement
Sound pressure level LpA (1 m)
Cold plate cooling
Power loss, int./ext. 4)
Thermal resistance Rth

Motor cable length, max.

Shielded/Unshielded

kW
m3/s

(ft3/s)

m (ft)

Degree of protection
Dimensions
Width
Height
Depth
- With internal air cooling
- With external air cooling,
on/behind mounting surface
- With cold plate cooling
Weight, approx.
With internal air cooling
With external air cooling
With cold plate cooling

1)

Rated power of a standard asynchronous (induction) motor at 600 V DC link voltage..

2)

Rated DC link current for dimensioning an external DC connection.

For DC link current calculation for dimensioning the Line Module, see chapter System description Dimensioning.

3)

If, due to a number of Line and Motor Modules being mounted side-by-side, the current carrying capacity exceeds 20 A, an additional 24-V-DC connection
using a 24-V terminal adapter is required (max. cross section 6 mm2, max. fuse protection 20 A).

4)

Power loss of Motor Module at rated power including losses of 24 V DC electronics power supply.

5)

Connector not included in scope of supply, see Accessories.

Siemens PM 21 2011

3/155

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

Technical specifications (continued)

DC link voltage 510 720 V DC

Single Motor Module in booksize format

Internal air cooling

6SL3120-

1TE24-5AA3

1TE26-0AA3

1TE28-5AA3

1TE31-3AA3

1TE32-0AA4

External air cooling

6SL3121-

1TE24-5AA3

1TE26-0AA3

1TE28-5AA3

1TE31-3AA3

1TE32-0AA4

Cold plate cooling

6SL3126-

1TE24-5AA3

1TE26-0AA3

1TE28-5AA3

1TE31-3AA3

1TE32-0AA4

Liquid cooling

6SL3125-

1TE32-0AA4

Output current
Rated current Irated
Base-load current IH
For S6 duty (40 %) IS6
Imax

A
A
A
A

45
38
60
85

60
52
80
113

85
68
110
141

132 (105 6))

105 (84)
150 (120)
210

200 (140 6))

141 (99)
230 (161)
282

Rated pulse frequency

kHz

Type rating 1)
Based on In
Based on IH

kW (HP)
kW (HP)

24 (30)
21 (25)

32 (40)
28 (40)

46 (60)
37 (50)

71 (100)
57 (75)

107 (150)
76 (100)

DC link current Id 2)

54

72

102

158

200

Current carrying capacity

DC link busbars
24 V DC busbars 3)

A
A

200
20

200
20

200
20

200
20

200
20

DC link capacitance

1175

1410

1880

2820

3995

Current requirement
At 24 V DC, max.

1.2

1.2

1.5

1.5

1.5

kW

0.46

0.62

0.79

1.29

2.09

kW
0.14/0.32
m3/s (ft3/s) 0.031 (1.1)
dB
< 65

0.16/0.46
0.031 (1.1)
< 65

0.2/0.59
0.044 (1.6)
< 60

0.29/1.0
0.144 (5.1)
< 73

0.47/1.62
0.144 (5.1)
< 73

kW
K/W

0.13/0.48
0.055

0.15/0.62
0.05

0.24/1.05
0.028

0.39/1.7
0.028

Internal/external air cooling

Power loss 4)
- With internal air cooling in
control cabinet
- With ext. air cooling, int./ext.
Cooling air requirement
Sound pressure level LpA (1 m)
Cold plate cooling
Power loss, int./ext. 4)
Thermal resistance Rth

0.11/0.34
0.055

Motor connection
U2, V2, W2
Conductor cross-section, max. mm2

M6 screw studs (X1) M6 screw studs (X1) M8 screw studs (X1) M8 screw studs (X1) M8 screw studs (X1)
2.5 50

2.5 50

2.5 95, 2 35

2.5 120, 2 50

2.5 120, 2 50

Shield connection

See Accessories

See Accessories

See Accessories

See Accessories

See Accessories

PE connection

M6 screw

M6 screw

M6 screw

M8 screw

M8 screw

Motor brake connection

Plug-in connector Plug-in connector Plug-in connector Plug-in connector Plug-in connector
(X11), 24 V DC, 2 A (X11), 24 V DC, 2 A (X11), 24 V DC, 2 A (X11), 24 V DC, 2 A (X11), 24 V DC, 2 A

Motor cable length, max.

Shielded/unshielded

m (ft)

IP20

IP20

IP20

IP20

IP20

mm (in)
mm (in)

150 (5.91)
380 (14.96)

150 (5.91)
380 (14.96)

200 (7.87)
380 (14.96)

300 (11.81)
380 (14.96)
629 (24.76)

300 (11.81)
380 (14.96)
629 (24.76)

mm (in)
mm (in)

270 (10.63)
270 (10.63)
270 (10.63)
270 (10.63)
270 (10.63)
226/71 (8.90/2.80) 226/71 (8.90/2.80) 226/92 (8.90/3.62) 226/82 (8.90/3.23) 226/82 (8.90/3.23)

mm (in)

226 (8.90)

226 (8.90)

226 (8.90)

226 (8.90)

226 (8.90)

kg (lb)
kg (lb)
kg (lb)

9 (19.8)
13.2 (29.1)
9.1 (20.1)

9 (19.8)
13.4 (29.5)
9.1 (20.1)

15 (33.1)
17.2 (37.9)
12.5 (27.6)

21 (46.3)
27.2 (60.0)
18 (39.7)

21 (46.3)
30 (66.2)
18 (39.7)

Degree of protection
Dimensions
Width
Height
- With fan 5)
Depth
- With internal air cooling
- With external air cooling,
on/behind mounting surface
- With cold plate cooling
Weight, approx.
With internal air cooling
With external air cooling
With cold plate cooling

100/150 (328/492) 100/150 (328/492) 100/150 (328/492) 100/150 (328/492) 100/150 (328/492)

1)

Rated power of a standard asynchronous (induction) motor at 600 V DC link voltage.

2)

Rated DC link current for dimensioning an external DC connection.

For DC link current calculation for dimensioning the Line Module, see chapter System description Dimensioning.

3)

If, due to a number of Line and Motor Modules being mounted side-by-side, the current carrying capacity exceeds 20 A, an additional 24-V-DC connection
using a 24-V terminal adapter is required (max. cross section 6 mm2, max. fuse protection 20 A).

4)

Power loss of Motor Module at rated power including losses of 24 V DC electronics power supply.

5)

The fan is supplied with the Motor Module and must be installed before the Motor Module is commissioned.

6)

In the case of cold-plate cooling, derating is necessary due to heat transfer to the external heat sink.
For further information, see chapter System description Dimensioning.

3/156

Siemens PM 21 2011

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

Selection and ordering data

Rated out- Type rating
put current
A

kW

(HP) 1)

Single Motor Module in booksize format

Internal air cooling

External air cooling

Cold plate cooling

Liquid cooling

Order No.

Order No.

Order No.

Order No.

DC link voltage 510 ... 720 V DC

1.6 (1.5)

6SL3120-1TE13-0AA3

6SL3121-1TE13-0AA3

6SL3126-1TE13-0AA3

2.7 (3)

6SL3120-1TE15-0AA3

6SL3121-1TE15-0AA3

6SL3126-1TE15-0AA3

4.8 (5)

6SL3120-1TE21-0AA3

6SL3121-1TE21-0AA3

6SL3126-1TE21-0AA3

18

9.7 (10)

6SL3120-1TE21-8AA3

6SL3121-1TE21-8AA3

6SL3126-1TE21-8AA3

30

16 (20)

6SL3120-1TE23-0AA3

6SL3121-1TE23-0AA3

6SL3126-1TE23-0AA3

45

24 (30)

6SL3120-1TE24-5AA3

6SL3121-1TE24-5AA3

6SL3126-1TE24-5AA3

60

32 (40)

6SL3120-1TE26-0AA3

6SL3121-1TE26-0AA3

6SL3126-1TE26-0AA3

85

46 (60)

6SL3120-1TE28-5AA3

6SL3121-1TE28-5AA3

6SL3126-1TE28-5AA3

132

71 (100)

6SL3120-1TE31-3AA3

6SL3121-1TE31-3AA3

6SL3126-1TE31-3AA3

200

107 (150)

6SL3120-1TE32-0AA4

6SL3121-1TE32-0AA4

6SL3126-1TE32-0AA4

6SL3125-1TE32-0AA4

Description

Order No.

Accessories
Power connector (X1)
At Motor Module end, with screw-type
terminals 1.5 ... 10 mm2
For Motor Modules with a rated output
current of 3 ... 30 A
Shield connection plate
For Line/Motor Modules in booksize
format
150 mm (5.91 in) wide
for internal air cooling
150 mm (5.91 in) wide
for external air cooling and cold plate
cooling
200 mm (7.87 in) wide
for internal air cooling
200 mm (7.87 in) wide
for external air cooling and cold plate
cooling
300 mm (11.81 in) wide
for all cooling types

Description

Order No.

Accessories for re-ordering

6SL3162-2MA00-0AA0

6SL3162-1AF00-0AA1
6SL3162-1AF00-0BA1
6SL3162-1AH01-0AA0
6SL3162-1AH01-0BA0
6SL3162-1AH00-0AA0

24 V jumper
For connection of the 24 V busbars
(for booksize format)

6SL3162-2AA01-0AA0

Warning labels in 16 languages

This set of foreign language warning
signs can be placed on top of the standard English or German signs.
A set of signs is supplied with the units.
One sign in each of the following
languages is provided in each set:
Chinese Simplified, Czech, Danish,
Dutch, Finnish, French, Greek,
Italian, Japanese, Korean, Polish,
Portuguese/Brazilian, Russian, Spanish,
Swedish, Turkish.

6SL3166-3AB00-0AA0

Dust-proof blanking plugs

(50 units)
For DRIVE-CLiQ port

6SL3066-4CA00-0AA0

DC link rectifier adapter

For direct infeed of DC link voltage
Screw-type terminals 0.5 10 mm2
6SL3162-2BD00-0AA0
for Line/Motor Modules in booksize
format with a width of 50 mm (1.97 in) or
100 mm (3.94 in)
Screw-type terminals 35 95 mm2
6SL3162-2BM00-0AA0
for Line/Motor Modules in booksize
format with a width of 150 mm, 200 mm
and 300 mm (5.91 in, 7.87 in and
11.81 in)
DC link adapters
6SL3162-2BM01-0AA0
(2 units)
For multi-tier configuration
Screw-type terminals 35 ... 95 mm2
For all Line Modules and Motor Modules
in booksize format
24 V terminal adapter
6SL3162-2AA00-0AA0
For all Line Modules and Motor Modules
in booksize format
DC link busbar kit (reinforced)
For replacement of DC link busbars
for 5 modules in booksize format
50 mm (1.97 in) wide
100 mm (3.94 in) wide

6SL3162-2DB00-0AA0
6SL3162-2DD00-0AA0

1)

Nominal HP based on Asynchronous motors (induction motors). Match the

motor nameplate current for specific sizing.

Siemens PM 21 2011

3/157

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

Characteristic curves
Overload capability
G_D211_EN_00001c

G_D211_EN_00082a

max

1.5 x

Base load current

rated
rated

60 s

0.25 s
10 s

300 s

Load cycle with previous load

Load cycle with 60 s overload with a load cycle period of 300 s

G_D211_EN_00083a

G_D211_EN_00002c

10 s
Imax
1.76 x

2.65 s

Base load current

Irated

rated
H

30 s
300 s

Load cycle without previous load

Load cycle with 30 s overload with a load cycle period of 300 s

G_D211_EN_00084a

max

S6
rated

0.7 x
rated

4 min
10 min

S6 load cycle with previous load with a load cycle period of 600 s
G_D211_EN_00085a

max

rated

0.7 x
rated

10 s
60 s

S6 load cycle with previous load with a load cycle period of 60 s

3/158

Siemens PM 21 2011

 Siemens AG 2010

SINAMICS S120 drive system

Motor Modules
Single Motor Modules in booksize format

Characteristic curves (continued)

Derating characteristics

Permissible output current

70
60
50
40
30
20
10

10

12

14

16

kHz

G_D211_EN_00090a

100
%
95
90

85
80
75
70
65
60

20

1000
(3281)

Pulse frequency

Output current dependent on pulse frequency

(rated current up to 132 A for Single Motor Modules in booksize format)

2000
3000 m
4000
(6562)
(9843) (ft) (13124)
Installation altitude above sea level

Output current dependent on installation altitude

100
%
90
80
70
60
50
40
30
20
10

10

12

14

16

kHz

20

Permissible input voltage in %

of rated voltage

Permissible output current

100
G_D211_EN_00272

G_D211_EN_00006b

90

0.9

80

0.8

0.7
1000
2000
3000 m 4000
(3282)
(6563)
(9845) (ft) (13126)
Installation altitude above sea level

70
0

Pulse frequency

G_D211_EN_00089a

Permissible output current

100
%
90
80
70
60
30
(86)

35
(95)

40
(104)

45
(113)

50
C 55
(122) (F) (131)

Voltage derating dependent on installation altitude

Permissible output current

I rated, I H, I S6, I max

Output current dependent on pulse frequency

(rated current up to 200 A for Single Motor Modules in booksize format)

1.0

Derating factor kU

Permissible output current

G_D212_EN_00002c

100
%
90
80

G_D211_EN_00249a

100
%
75
50
25
0
0

10

Hz (20...1600)
15
Output frequency

Current derating dependent on output frequency

Ambient temperature

Output current dependent on ambient temperature

Siemens PM 21 2011

3/159

Siemens AG 2010

Main motors
5/2

Overview

5/4

Asynchronous and synchronous

motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection
Forced ventilation, IP23 degree of protection
Water cooling, IP65 degree of protection
Water cooling, IP55 degree of protection
1PH8 synchronous motors
Forced ventilation, IP55 degree of protection
Water cooling, IP65 degree of protection
Water cooling, IP55 degree of protection
1PH7 asynchronous motors
Forced ventilation, IP55 degree of
protection
1PL6 asynchronous motors
Forced ventilation, IP23 degree of
protection

5/8
5/8
5/20
5/30
5/36
5/44
5/44
5/46
5/50
5/62
5/64
5/80
5/82
5/95

Selection guides

5/95
5/95
5/96
5/97
5/98
5/102
5/102
5/103
5/104
5/105

Selection guides for 1PH8 motors

Terminal box/Cable cross-sections
Ventilation data/Sound pressure levels
Cooling data/Sound pressure levels/
Water specification
Radial force diagrams
Selection guides for 1PH7/1PL6 motors
Terminal box/Cable cross-sections
Ventilation data/Sound pressure levels
Bearing design/Bearing service life
Radial force diagrams

5/107
5/107

Selection guides for 1PH7 motors

Mounted holding brakes

5/108
5/108

Dimensional drawings
1PH8 asynchronous motors
Shaft heights 80 and 100
1PH8 asynchronous/synchronous motors
Shaft height 132
1PH8 asynchronous motors
Shaft height 160
1PH8 synchronous motors
Shaft height 160
1PH8 asynchronous/synchronous motors
shaft heights 180 and 225
1PH8 asynchronous motors
Shaft heights 280 and 355
1PH7 asynchronous motors
1PL6 asynchronous motors

5/118
5/124
5/128
5/132
5/136
5/140
5/148
Part 4

Technical definitions
for AC motors

Part 14 CAD CREATOR

Dimension drawing and
2D/3D CAD generator
www.siemens.com/cadcreator

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Overview

Motor type

Features

Degree of
protection

Cooling method

1PH8 asynchronous motor

Three-phase squirrel-cage motor without housing

High power density with small motor dimensions

IP55

Forced ventilation

IP23

Forced ventilation

IP55/IP65

Water cooling

Permanent-magnet synchronous motor

Excellent performance features
Extremely high power density with small
motor dimensions

IP55

Forced ventilation

IP55/IP65

Water cooling

1PH7 asynchronous motor

Three-phase squirrel-cage motor without housing

High power density with small motor dimensions

IP55

Forced ventilation

1PL6 asynchronous motor

Three-phase squirrel-cage motor without housing

Extremely high power density with small
motor dimensions

IP23

Forced ventilation

1PH8 synchronous motor

The selection and ordering data for the SINAMICS S120 Motor Modules are based on the booksize format by way of example.
Other formats are also possible. The SIZER configuration tool is available for detailed configuration.
For technical definitions for AC motors, see chapter Servomotors.

5/2

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Overview

Shaft height
SH 80/SH 100/SH 132/SH 160/
SH 355

Rated power Prated for S1 duty

kW [HP]
590 (730)1)
[791 (979)]

2.8
[3.75]

SH 355
275 [369]
(295) [396]1)

SH 80/SH 100/SH 132/SH 160/

SH 180/SH 225/SH 280

3.5
[4.70]

SH 132/SH 160

SH 132/SH 160/
SH 180/SH 225

99
[133]

15
[20.1]

310
[416]

16.3
[21.9]

385
[516]

SH 180/SH 225/SH 280

SH 180/SH 225/SH 280

20.5
[27.5]

1)

Page

13 ... 5900 Nm
[9.6 ... 4352 lbf-ft]
(13 ... 6860 Nm)
[9.6 ... 5060 lbf-ft]1)

5/8

4280 ... 11640 Nm

5/20

[3157 ... 8586 lbf-ft]

1230 [1649]
(1340) [1797]1) (4730 ... 12435 Nm)

460
[617]

15.7
[21.0]

Rated torque Mrated

630
[845]

[3489 ... 9172 lbf-ft]1)

20 ... 2610 Nm
[14.8 ... 1925 lbf-ft]

5/30

94 ... 435 Nm
[69.3 ... 321 lbf-ft]

5/44

107 ... 1650 Nm

[78.9 ... 1217 lbf-ft]

5/46

265 ... 2480 Nm

[196 ... 1829 lbf-ft]

5/64

370 ... 3600 Nm

[273 ... 2655 lbf-ft]

5/82

Information in round brackets refers to data for shaft height 355 at 85 dB, for selection and ordering data see Catalog CR1.

Siemens PM 21 2011

5/3

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Overview

5
1PH8 motors, forced ventilation, shaft heights 80 to 160

1PH8 motors, water cooling, shaft heights 180 to 280

1PH8 motors, water cooling, shaft heights 80 to 160

1PH8 motors, forced ventilation, shaft height 355

The 1PH8 motor series is a new motor generation for universal

implementation in plants and machines that have been developed with Motion Control applications. The motors are available
as an asynchronous variant as well as a compact synchronous
variant with either forced ventilation or water cooling, based on
a flexible building block principle. Comprehensive function expansions such as different bearing concepts expand the application range.

When developing the new 1PH8 motor series, we took special

care to ensure maximum compatibility with the SINAMICS S120
drive system. For example, the specially harmonized power
components, electronic rating plates, and the ability to integrate
the motors via the DRIVE-CLiQ system interface ensure quick
and easy commissioning as well as problem-free operation.

In comparison to the freely selectable performance of vector

and servo control with the SINAMICS S120 drive system, it is
possible to select between asynchronous or synchronous variants in the case of the 1PH8 motor series. This flexible interoperation of converter and motor makes it even easier to master
extreme duty cycles, short control rise times and high precision
in terms of speed, torque and positioning.
Because the 1PH8 motors are often used as the largest and
central drive in the machine, they are known as "main motors".
Main motor = High performance +
Highly dynamic response +
High degree of precision

5/4

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

7
7
7

7
7
7
7
7

High power density with small motor dimensions

Wide speed control ranges
High degree of flexibility due to the choice of
- Asynchronous or synchronous design
- Forced ventilation or water cooling
- Mechanical designs
Long-life bearings
High rotational accuracy, even at the lowest speeds
Maximum thermal utilization over the complete speed
range
Low sound pressure level
Optimized for the SINAMICS S120 drive system

Characteristic curves
1PH8 asynchronous motor
P

Pmax

S1
Constant
power
range
(field weakening range)
nrated

nmax
n

n2

Typical speed/power characteristic for 1PH8 asynchronous motors

1PH8 synchronous motor

P
Pmax

S1
Prated
G_PM21_EN_00075

The 1PH8 motors are suitable for installation in dry indoor areas
without corrosive atmospheres.

Voltage limiting characteristic

Prated

Application
The application spectrum reaches across all sectors and
comprises, for example:
Main drives in presses and extruders
Converting applications
Rotary axes in the paper and printing industry
Use in crane systems

Constant
torque
range

G_PM21_EN_00074a

Benefits

nrated

nmax,Inv

nmax

Typical speed/power characteristic for 1PH8 synchronous motors

The characteristic curves show the typical relationship between

motor speed and drive power for 1PH8 motors for duty type S1
(continuous duty) in accordance with IEC 60034-1.
The detailed characteristic curves for the corresponding voltage
and winding variants can be found in the 1PH8 Configuration
Manual.

Siemens PM 21 2011

5/5

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors
Forced ventilation

Technical specifications
1PH8 motor, forced ventilation

Insulation of the stator winding

in accordance with EN 60034-1 (IEC 60034-1)

For an ambient temperature of up to 40 C (104F)

Temperature class 180 (H)

Cooling
according to EN 60034-6 (IEC 60034-6)
1PH808 to 1PH816
1PH835

Forced ventilation
Fan mounted axially at NDE
Fan mounted radially at NDE

Temperature monitoring
1PH808 to 1PH816
1PH835

Temperature sensor KTY84 in the stator winding

1 additional KTY84 as reserve

Motor fan ratings

1PH808
1PH810 to 1PH835

230 V 1 AC 50 Hz/265 V 1 AC 60 Hz
400 V 3 AC 50 Hz/480 V 3 AC 60 Hz

Type of construction in accordance with

EN 60034-7 (IEC 60034-7)
1PH808
1PH810 to 1PH816
1PH835

IM B3, IM B5
IM B3, IM B5, IM B35
IM B3, IM B35

Degree of protection in accordance with

EN 60034-5 (IEC 60034-5)
1PH808 to 1PH835
1PH835

IP55
IP23

Shaft extension on the drive end in accordance with

DIN 748-3 (IEC 60072-1)

Plain shaft or fitted key

full-key or half-key balancing for fitted key

Shaft and flange accuracy

in accordance with DIN 42955 (IEC 60072-1)1)
1PH808 to 1PH816
1PH835

Tolerance R (reduced)
Tolerance N (normal)

Vibration magnitude
in accordance with Siemens/EN 60034-14 (IEC 60034-14)1)
1PH808 to 1PH816
1PH835

Grade R/A
Grade A

Max. sound pressure level LpA (1 m)

in accordance with EN ISO 1680, max.
Tolerance + 3 dB, external fan 50 Hz
1PH808 to 1PH813
1PH816
1PH835

70 dB
at a rated pulse frequency of 4 kHz and a speed range up to 5000 rpm
73 dB
at a rated pulse frequency of 4 kHz and a speed range up to 5000 rpm
77 dB
at a rated pulse frequency of 2.5 kHz and a speed range up to 2800 rpm

1PH808 to 1PH813
1PH816
1PH835

Connector for signals or DRIVE-CLiQ interface

(mating connector is not included in the scope of supply)
Terminal box NDE top/power connector
Terminal box NDE top
Terminal box DE right

Paint finish

Anthracite RAL 7016

Connection

1)

Shaft extension run-out, concentricity of centering ring and shaft, and perpendicularity of flange to shaft.

5/6

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors
Water cooling

Technical specifications (continued)

1PH8 motor, water cooling
Insulation of the stator winding
in accordance with EN 60034-1 (IEC 60034-1)

For a cooling water inlet temperature of up to 30 C (86F)

Temperature class 180 (H)2)

Cooling
according to EN 60034-6 (IEC 60034-6)

Water cooling
Max. cooling water pressure at inlet: 6 bar
Connecting thread at NDE

Temperature monitoring
1PH808 to 1PH816
1PH818 to 1PH828

Temperature sensor KTY84 in the stator winding

1 additional KTY84 as reserve

Type of construction in accordance with

EN 60034-7 (IEC 60034-7)
1PH808
1PH810 to 1PH828

IM B3, IM B5
IM B3, IM B5, IM B35

Degree of protection in accordance with

EN 60034-5 (IEC 60034-5)
1PH808 to 1PH816
1PH818 to 1PH828

IP65
IP55

Shaft extension on the drive end in accordance with

DIN 748-3 (IEC 60072-1)

Plain shaft or fitted key

full-key or half-key balancing for fitted key

Shaft and flange accuracy

in accordance with DIN 42955 (IEC 60072-1)1)
1PH808 to 1PH816
1PH818 to 1PH828

Tolerance R (reduced)
Tolerance N (normal)

Vibration magnitude
in accordance with Siemens/EN 60034-14 (IEC 60034-14)1)
1PH808 to 1PH816
1PH818 to 1PH828

Grade R/A
Grade A

Sound pressure level LpA (1 m)

in accordance with EN ISO 1680, max.
Tolerance +3 dB
1PH808 to 1PH813
1PH816
1PH818
1PH822
1PH828

68 dB
at a rated pulse frequency of 4 kHz and a speed range up to 5000 rpm
69 dB
at a rated pulse frequency of 4 kHz and a speed range up to 5000 rpm
70 dB
at a rated pulse frequency of 2 or 4 kHz and a speed range up to 5000 rpm
70 dB
at a rated pulse frequency of 2 or 4 kHz and a speed range up to 4500 rpm
72 dB
at a rated pulse frequency of 2 kHz and a speed range up to 3300 rpm

1PH808 to 1PH813
1PH816 to 1PH828

Connector for signals or DRIVE-CLiQ interface

(mating connector is not included in the scope of supply)
Terminal box NDE top/power connector
Terminal box NDE top

Paint finish

Anthracite RAL 7016

Connection

1)

Shaft extension run-out, concentricity of centering ring and shaft, and perpendicularity of flange to shaft.

2)

The following motors are designed to conform to temperature class 155 (F):
1PH8107-1.F2
1PH8138-2.F2/1PH8138-2.G2
1PH8164/1PH8166/1PH8168

Siemens PM 21 2011

5/7

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

rpm

1PH8 asynchronous
motor
Forced ventilation

Order No.

Line voltage 400 V 3 AC, Smart/Basic Line Module

400

160

9.5 (12.74)
13 (17.43)

1000

100

3.7 (4.96)
6.3 (8.45)

132

160
1500

260

14.3

2150

6500

1PH8163-17 B 7 7 - ... 1

300

14.1

1750

6500

1PH8165-17 B 7 7 - ... 1

35 (25.8)

10

333

35.8

2550

9000

1PH8103-17 D 7 7 - ... 1

60 (44.3)

17.5

307

35.5

4300

9000

1PH8107-17 D 7 7 - ... 1

12 (16.1)

115 (84.8)

30

319

35.0

3000

8000

1PH8133-17 D 7 7 - ... 1

17 (22.8)

162 (119)

43

307

34.8

4300

8000

1PH8137-17 D 7 7 - ... 1

22 (29.5)

210 (155)

55

300

34.2

2800

6500

1PH8163-17 D 7 7 - ... 1

28 (37.55)

267 (197)

71

292

34.2

4600

6500

1PH8165-17 D 7 7 - ... 1

346

53.3

4700

10000

1PH8083-17 F 7 7 - ... 1

2.8 (3.75)
3.7 (4.96)

24 (17.7)

10

336

53.2

5200

10000

1PH8087-17 F 7 7 - ... 1

100

3.7 (4.96)

24 (17.7)

12.5

265

52.4

5000

9000

1PH8101-17 F 7 7 - ... 1

5.5 (7.38)

35 (25.8)

13.5

368

52.4

4200

9000

1PH8103-17 F 7 7 - ... 1

7.0 (9.39)

45 (33.2)

17.5

348

51.9

5250

9000

1PH8105-17 F 7 7 - ... 1

9.0 (12.1)

57 (42)

23.5

330

52.2

4500

9000

1PH8107-17 F 7 7 - ... 1

70 (51.6)

24

360

51.4

4800

8000

1PH8131-17 F 7 7 - ... 1

11 (14.75)
15 (20.12)

160
80
100
132
160
3000

30
36

80

132

2000

227 (167)
310 (229)

80
100

18 (13.3)

34

342

51.3

5500

8000

1PH8133-17 F 7 7 - ... 1

18.5 (24.81)

118 (87)

43

330

51.3

6150

8000

1PH8135-17 F 7 7 - ... 1

22 (29.5)

140 (103)

56

308

51.3

4300

8000

1PH8137-17 F 7 7 - ... 1

30 (40.23)

191 (141)

71

319

50.8

3500

6500

1PH8163-17 F 7 7 - ... 1

37 (49.62)

236 (174)

78

350

50.8

2800

6500

1PH8165-17 F 7 7 - ... 1

11.6

293

70.2

9200

10000

1PH8083-17 G 7 7 - ... 1

3.7 (4.96)

96 (70.8)

7.5

18 (13.3)

4.9 (6.57)

23 (17.0)

14.1

320

69.8

8400

10000

1PH8087-17 G 7 7 - ... 1

7 (9.39)

33 (24.3)

17.5

345

69.0

6000

9000

1PH8103-17 G 7 7 - ... 1

10.5 (14.18)

50 (36.9)

26

355

68.6

4000

9000

1PH8107-17 G 7 7 - ... 1

20 (26.82)

96 (70.8)

45

350

68.1

4000

8000

1PH8133-17 G 7 7 - ... 1

28 (37.55)

134 (98.8)

60

350

68.1

4000

8000

1PH8137-17 G 7 7 - ... 1

36 (48.28)

172 (127)

83

324

67.5

3000

6500

1PH8163-17 G 7 7 - ... 1

41 (54.98)

196 (145)

88

350

67.4

2750

6500

1PH8165-17 G 7 7 - ... 1

4.1 (5.50)

13 (9.59)

13.6

298

102.6

10000

10000

1PH8083-17 M 7 7 - ... 1

4.8 (6.44)

15 (11.1)

17.3

284

102.2

10000

10000

1PH8087-17 M 7 7 - ... 1

8.4 (11.3)

27 (20.0)

25.7

297

102.1

14250

9000

1PH8103-17 M 7 7 - ... 1

38 (28.0)

38

294

101.6

16500

9000

12 (16.1)

1PH8107-17 M 7 7 - ... 1
For versions, see
Order No. supplement
and options on page 5/54.

5/8

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetiz- Efficiency Moment of

ing
inertia
current

cos

Terminal
box

kg (lb)

Type

J
kgm2 (lbf-in-s2)

Weight,
approx.

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8163-1. B ...

0.91

8.1

0.823

0.2160 (1.912)

196 (432)

gk863

30

6SL312 7 -1TE23-0AA3

1PH8165-1. B ...

0.86

14.9

0.826

0.2320 (2.053)

230 (507)

gk863

45

6SL312 7 -1TE24-5AA3

1PH8103-1. D ...

0.82

4.6

0.814

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8107-1. D ...

0.82

8.2

0.834

0.0289 (0.256)

73 (161)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8133-1. D ...

0.88

10.1

0.871

0.0760 (0.673)

106 (234)

gk833

30

6SL312 7 -1TE23-0AA3

1PH8137-1. D ...

0.88

15.1

0.881

0.1090 (0.965)

141 (311)

gk833

45

6SL312 7-1TE24-5AA3

1PH8163-1. D ...

0.89

17.3

0.909

0.2160 (1.912)

196 (432)

gk863

60

6SL312 7-1TE26-0AA3

1PH8165-1. D ...

0.89

22.2

0.914

0.2320 (2.053)

230 (507)

gk863

85

6SL312 7-1TE28-5AA3

1PH8083-1. F ...

0.80

3.8

0.809

0.0064 (0.057)

32 (70.6)

gk803

6SL312 7 -1TE21-0AA3

1PH8087-1. F ...

0.81

4.9

0.817

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8101-1. F ...

0.80

6.0

0.835

0.0138 (0.122)

42 (92.6)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8103-1. F ...

0.80

6.5

0.852

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8105-1. F ...

0.79

8.8

0.867

0.0252 (0.223)

65 (143)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8107-1. F ...

0.81

10.8

0.869

0.0289 (0.256)

73 (161)

gk813

30

6SL312 7 -1TE23-0AA3

1PH8131-1. F ...

0.84

10.4

0.899

0.0590 (0.522)

89 (196)

gk833

30

6SL312 7 -1TE23-0AA3

1PH8133-1. F ...

0.85

14.2

0.899

0.0760 (0.673)

106 (234)

gk833

45

6SL312 7 -1TE24-5AA3

1PH8135-1. F ...

0.85

18.1

0.898

0.0940 (0.832)

125 (276)

gk833

45

6SL312 7 -1TE24-5AA3

1PH8137-1. F ...

0.84

24.2

0.904

0.1090 (0.965)

141 (311)

gk833

60

6SL312 7 -1TE26-0AA3

1PH8163-1. F ...

0.87

25.6

0.923

0.2160 (1.912)

196 (432)

gk863

85

6SL312 7 -1TE28-5AA3

1PH8165-1. F ...

0.88

27.0

0.926

0.2320 (2.053)

230 (507)

gk863

85

6SL312 7 -1TE28-5AA3

1PH8083-1. G...

0.79

5.7

0.832

0.0064 (0.057)

32 (70.6)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8087-1. G...

0.78

7.3

0.853

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8103-1. G...

0.79

8.7

0.877

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8107-1. G...

0.78

12.9

0.897

0.0289 (0.256)

73 (161)

gk813

30

6SL312 7 -1TE23-0AA3

1PH8133-1. G...

0.85

18.1

0.919

0.0760 (0.673)

106 (234)

gk833

45

6SL312 7 -1TE24-5AA3

1PH8137-1. G...

0.87

21.5

0.924

0.1090 (0.965)

141 (311)

gk833

60

6SL312 7 -1TE26-0AA3

1PH8163-1. G...

0.88

28.1

0.929

0.2160 (1.912)

196 (432)

gk863

85

6SL312 7 -1TE28-5AA3
6SL312 7 -1TE28-5AA3

1PH8165-1. G...

0.87

32.4

0.927

0.2320 (2.053)

230 (507)

gk863

854)

1PH8083-1. M...

0.74

7.3

0.869

0.0064 (0.057)

32 (70.6)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8087-1. M...

0.72

9.6

0.871

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8103-1. M...

0.78

12.2

0.900

0.0172 (0.152)

51 (112)

gk813

30

6SL312 7 -1TE23-0AA3

1PH8107-1. M...

0.76

19.2

0.900

0.0289 (0.256)

73 (161)

gk813

45

6SL312 7 -1TE24-5AA3

Cooling:
Internal air cooling
External air cooling

1)
2)
3)

4)

0
1

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position B to D).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz.
For lower power ratings, Motor Modules in blocksize format can be configured as an alternative
(levels of output current: 7.7 A/10.2 A/18 A).
The rated output current of the Motor Module is lower than the rated motor current at 4 kHz.
Siemens PM 21 2011

5/9

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

rpm

1PH8 asynchronous
motor
Forced ventilation

Order No.

Line voltage 400 V 3 AC, Active Line Module

500
1150

160
100
132

160
1750

30

325

17.6

2200

6500

1PH8163-17 B 7 7 - . .. 1

306 (221)

36

365

17.5

1850

6500

1PH8165-17 B 7 7 - . .. 1

4.3 (5.77)

36 (26.6)

10

380

40.7

2450

9000

1PH8103-17 D 7 7 - . .. 1

7.2 (9.66)

60 (44.3)

17.5

348

40.6

4750

9000

1PH8107-17 D 7 7 - . .. 1

13.5 (18.1) 112 (82.6)

29

361

40.0

3000

8000

1PH8133-17 D 7 7 - . .. 1

19.5 (26.1) 162 (119)

43

350

39.8

4000

8000

1PH8137-17 D 7 7 - . .. 1

25 (33.5)

208 (153)

55

343

39.2

3550

6500

1PH8163-17 D 7 7 - . .. 1

31 (41.6)

257 (190)

69

333

39.2

4850

6500

1PH8165-17 D 7 7 - . .. 1

398

61.7

5200

10000

1PH8083-17 F 7 7 - . .. 1

3.3 (4.43)
4.3 (5.77)

23 (17.0)

10

396

61.3

5850

10000

1PH8087-17 F 7 7 - . .. 1

100

4.3 (5.77)

23 (17.0)

12.5

304

60.8

5000

9000

1PH8101-17 F 7 7 - . .. 1

6.3 (8.45)

34 (25.1)

13.1

412

60.8

4000

9000

1PH8103-17 F 7 7 - . .. 1

8 (10.7)

44 (32.5)

17.5

400

60.2

5900

9000

1PH8105-17 F 7 7 - . .. 1

10 (13.4)

55 (40.6)

22

380

60.4

5000

9000

1PH8107-17 F 7 7 - . .. 1

13 (17.4)

71 (52.4)

24

416

59.8

5150

8000

1PH8131-17 F 7 7 - . .. 1

17.5 (23.5)

160

18 (13.3)

7.5

96 (70.8)

34

392

59.7

5000

8000

1PH8133-17 F 7 7 - . .. 1

21.5 (28.8) 117 (86.3)

43

383

59.6

5500

8000

1PH8135-17 F 7 7 - . .. 1

25 (33.5)

136 (100)

56

353

59.6

5000

8000

1PH8137-17 F 7 7 - . .. 1

34 (45.6)

186 (137)

70

366

59.2

3050

6500

1PH8163-17 F 7 7 - . .. 1

41 (55.0)

224 (165)

76

400

59.1

2650

6500

1PH8165-17 F 7 7 - . .. 1

80

4.1 (5.50)

17 (12.5)

11.3

332

80.0

10000

10000

1PH8083-17 G 7 7 - . .. 1

5.4 (7.24)

22 (16.2)

13.7

353

79.8

9650

10000

1PH8087-17 G 7 7 - . .. 1

100

7.5 (10.1)

31 (22.9)

17

382

78.9

6000

9000

1PH8103-17 G 7 7 - . .. 1

12.0 (16.1)

50 (36.9)

26

406

78.6

4600

9000

1PH8107-17 G 7 7 - . .. 1

22.5 (30.2)

93 (68.6)

44

400

78.1

5000

8000

1PH8133-17 G 7 7 - . .. 1

29 (38.9)

120 (88.5)

56

400

77.9

5000

8000

1PH8137-17 G 7 7 - . .. 1

38 (51.0)

158 (116)

78

370

77.4

3200

6500

1PH8163-17 G 7 7 - . .. 1

44 (59.0)

183 (135)

132
160
3300

229 (169)

16 (21.5)

80

132

2300

12 (16.1)

80
100

85

394

77.4

3000

6500

1PH8165-17 G 7 7 - . .. 1

4.5 (6.03)

13 (9.59)

13.5

327

112.6

10000

10000

1PH8083-17 M 7 7 - . .. 1

5.2 (6.97)

15 (11.1)

17.1

303

112.3

10000

10000

1PH8087-17 M 7 7 - . .. 1

9.3 (12.5)

27 (20.0)

25.7

326

112.1

16000

9000

1PH8103-17 M 7 7 - . .. 1

38 (28.0)

38

314

111.7

18000

9000

13 (17.4)

1PH8107-17 M 7 7 - . .. 1
For versions, see
Order No. supplement
and options on page 5/54.

5/10

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Moment of
inertia

cos

Terminal
box

kg (lb)

Type

J
kgm2 (lbf-in-s2)

Weight,
approx.

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8163-1. B ...

0.90

8.9

0.819

0.2160 (1.912)

196 (432)

gk863

30

6SL312 7 -1TE23-0AA3

1PH8165-1. B ...

0.85

14.8

0.830

0.2320 (2.053)

230 (507)

gk863

45

6SL312 7 -1TE24-5AA3

1PH8103-1. D ...

0.81

4.8

0.824

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8107-1. D ...

0.82

8.2

0.852

0.0289 (0.256)

73 (161)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8133-1. D ...

0.87

10.7

0.884

0.0760 (0.673)

106 (234)

gk833

30

6SL312 7 -1TE23-0AA3

1PH8137-1. D ...

0.87

16.1

0.891

0.1090 (0.965)

141 (311)

gk833

45

6SL312 7 -1TE24-5AA3

1PH8163-1. D ...

0.88

17.5

0.915

0.2160 (1.912)

196 (432)

gk863

60

6SL312 7 -1TE26-0AA3

1PH8165-1. D ...

0.89

20.9

0.921

0.2320 (2.053)

230 (507)

gk863

85

6SL312 7 -1TE28-5AA3

1PH8083-1. F ...

0.80

3.8

0.831

0.0064 (0.057)

32 (70.6)

gk803

6SL312 7 -1TE21-0AA3

1PH8087-1. F ...

0.78

5.3

0.838

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8101-1. F ...

0.80

6.0

0.852

0.0138 (0.122)

42 (92.6)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8103-1. F ...

0.81

6.0

0.859

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8105-1. F ...

0.78

8.8

0.878

0.0252 (0.223)

65 (143)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8107-1. F ...

0.80

10.9

0.878

0.0289 (0.256)

73 (161)

gk813

30

6SL312 7 -1TE23-0AA3

1PH8131-1. F ...

0.84

10.3

0.914

0.0590 (0.522)

89 (196)

gk833

30

6SL312 7 -1TE23-0AA3

1PH8133-1. F ...

0.85

13.6

0.913

0.0760 (0.673)

106 (234)

gk833

45

6SL312 7 -1TE24-5AA3

1PH8135-1. F ...

0.84

18.3

0.909

0.0940 (0.832)

125 (276)

gk833

45

6SL312 7 -1TE24-5AA3

1PH8137-1. F ...

0.86

23.1

0.907

0.1090 (0.965)

141 (311)

gk833

60

6SL312 7 -1TE26-0AA3

1PH8163-1. F ...

0.87

24.6

0.926

0.2160 (1.912)

196 (432)

gk863

85

6SL312 7 -1TE28-5AA3

1PH8165-1. F ...

0.88

25.8

0.934

0.2320 (2.053)

230 (507)

gk863

85

6SL312 7 -1TE28-5AA3

1PH8083-1. G...

0.78

5.7

0.852

0.0064 (0.057)

32 (70.6)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8087-1. G...

0.79

6.8

0.859

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8103-1. G...

0.79

8.1

0.891

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 -1TE21-8AA3

1PH8107-1. G...

0.78

13.0

0.909

0.0289 (0.256)

73 (161)

gk813

30

6SL312 7 -1TE23-0AA3

1PH8133-1. G...

0.84

18.1

0.933

0.0760 (0.673)

106 (234)

gk833

45

6SL312 7 -1TE24-5AA3

1PH8137-1. G...

0.86

21.9

0.929

0.1090 (0.965)

141 (311)

gk833

60

6SL312 7 -1TE26-0AA3

1PH8163-1. G...

0.87

28.2

0.935

0.2160 (1.912)

196 (432)

gk863

85

6SL312 7 -1TE28-5AA3

1PH8165-1. G...

0.86

31.0

0.932

0.2320 (2.053)

230 (507)

gk863

85

6SL312 7 -1TE28-5AA3

1PH8083-1. M...

0.74

7.3

0.875

0.0064 (0.057)

32 (70.6)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8087-1. M...

0.73

9.2

0.878

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 -1TE21-8AA3

1PH8103-1. M...

0.78

12.2

0.900

0.0172 (0.152)

51 (112)

gk813

30

6SL312 7 -1TE23-0AA3

1PH8107-1. M...

0.78

12.2

0.900

0.0289 (0.256)

73 (161)

gk813

45

6SL312 7 -1TE24-5AA3

Cooling:
Internal air cooling
External air cooling

1)
2)
3)

0
1

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard; 14th data position B to D).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz.
For lower power ratings, Motor Modules in blocksize format can be configured as an alternative
(levels of output current: 7.7 A/10.2 A/18 A).
Siemens PM 21 2011

5/11

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

rpm

1PH8 asynchronous
motor
Forced ventilation

Order No.

Line voltage 480 V 3 AC, Smart/Basic/Active Line Module

600
1350

160
100
132

160
2000

370

21.0

2150

6500

1PH8163-17 B 7 7 - ... 1

35

420

20.8

1800

6500

1PH8165-17 B 7 7 - ... 1

423

47.3

3500

9000

1PH8103-17 D 7 7 - ... 1

4.7 (6.30)

33 (24.3)

9.7

8 (10.7)

57 (42.0)

17

400

47.1

5045

9000

1PH8107-17 D 7 7 - ... 1

15 (20.1)

106 (78.2)

28

417

46.5

3500

8000

1PH8133-17 D 7 7 - ... 1

22 (29.5)

156 (115)

42

404

46.4

4000

8000

1PH8137-17 D 7 7 - ... 1

28 (37.6)

198 (146)

52

400

45.8

4000

6500

1PH8163-17 D 7 7 - ... 1

34 (45.6)

241 (178)

66

387

45.8

5600

6500

1PH8165-17 D 7 7 - ... 1

447

70.0

5550

10000

1PH8083-17 F 7 7 - ... 1

3.7 (4.96)
4.9 (6.57)

23 (17.0)

10

435

69.9

6100

10000

1PH8087-17 F 7 7 - ... 1

100

4.7 (6.30)

22 (16.2)

12.5

343

69.0

7500

9000

1PH8101-17 F 7 7 - ... 1

7 (9.39)

33 (24.3)

12.7

460

69.1

4100

9000

1PH8103-17 F 7 7 - ... 1

9 (12.1)

43 (31.7)

17

453

68.5

6180

9000

1PH8105-17 F 7 7 - ... 1

11 (14.8)

53 (39.1)

21.5

428

68.6

5500

9000

1PH8107-17 F 7 7 - ... 1

15 (20.1)

72 (53.1)

24

460

68.2

5300

8000

1PH8131-17 F 7 7 - ... 1

160
80
100
132
160
3600

30

302 (223)

80

132

2650

14.5 (19.4) 231 (170)

19 (25,5)

80
100

18 (13.3)

7.6

20 (26.8)

96 (70.8)

34

445

68.0

6200

8000

1PH8133-17 F 7 7 - ... 1

24 (32.2)

115 (84.8)

43

434

67.9

7100

8000

1PH8135-17 F 7 7 - ... 1

28 (37.6)

134 (98.8)

55

401

67.9

4000

8000

1PH8137-17 F 7 7 - ... 1

37 (49.6)

177 (131)

68

416

67.4

3550

6500

1PH8163-17 F 7 7 - ... 1

45 (60.4)

215 (159)

75

440

67.5

3300

6500

1PH8165-17 F 7 7 - ... 1

4.6 (6.17)

17 (12.5)

11.2

376

91.6

10000

10000

1PH8083-17 G 7 7 - ... 1

6 (8.05)

22 (16.2)

13.6

390

91.6

10000

10000

1PH8087-17 G 7 7 - ... 1

8 (10.7)

29 (21.4)

16

434

90.4

7500

9000

1PH8103-17 G 7 7 - ... 1

13 (17.4)

47 (34.7)

24

460

90.0

7000

9000

1PH8107-17 G 7 7 - ... 1

24 (32.2)

86 (63.4)

41

456

89.6

7000

8000

1PH8133-17 G 7 7 - ... 1

30 (40.2)

108 (79.7)

52

460

89.4

4250

8000

1PH8137-17 G 7 7 - ... 1

40 (53.6)

144 (106)

76

390

89.2

3500

6500

1PH8163-17 G 7 7 - ... 1

50 (67.1)

180 (133)

85

440

89.0

3250

6500

1PH8165-17 G 7 7 - ... 1

4.9 (6.57)

13 (9.59)

14

355

122.6

10000

10000

1PH8083-17 M 7 7 - ... 1

5.7 (7.64)

15 (11.1)

17.1

329

122.4

10000

10000

1PH8087-17 M 7 7 - ... 1

10 (13.4)

27 (19.9)

25.4

355

122.1

17650

9000

1PH8103-17 M 7 7 - ... 1

14 (18.8)

37 (27.3)

37.5

350

121.6

18000

9000

1PH8107-17 M 7 7 - ... 1
For versions, see
Order No. supplement
and options on page 5/54.

5/12

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Moment of
inertia

cos

Terminal
box

kg (lb)

Type

J
kgm2 (lbf-in-s2)

Weight,
approx.

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8163-1. B ...

0.90

8.1

0.851

0.2160 (1.912)

196 (432)

gk863

30

6SL312 7 - 1TE23 - 0AA3

1PH8165-1. B ...

0.88

12.0

0.850

0.2320 (2.053)

230 (507)

gk863

45

6SL312 7 - 1TE24 - 5AA3

1PH8103-1. D ...

0.82

4.4

0.848

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 - 1TE21 - 8AA3

1PH8107-1. D ...

0.80

8.2

0.867

0.0289 (0.256)

73 (161)

gk813

18

6SL312 7 - 1TE21 - 8AA3

1PH8133-1. D ...

0.86

10.7

0.904

0.0760 (0.673)

106 (234)

gk833

30

6SL312 7 - 1TE23 - 0AA3

1PH8137-1. D ...

0.86

15.9

0.902

0.1090 (0.965)

141 (311)

gk833

45

6SL312 7 - 1TE24 - 5AA3

1PH8163-1. D ...

0.88

17.7

0.924

0.2160 (1.912)

196 (432)

gk863

60

6SL312 7 - 1TE26 - 0AA3

1PH8165-1. D ...

0.86

22.5

0.928

0.2320 (2.053)

230 (507)

gk863

85

6SL312 7 - 1TE28 - 5AA3

1PH8083-1. F ...

0.79

3.7

0.850

0.0064 (0.057)

32 (70.6)

gk803

6SL312 7 - 1TE21 - 0AA3

1PH8087-1. F ...

0.80

4.9

0.864

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8101-1. F ...

0.79

6.0

0.871

0.0138 (0.122)

42 (92.6)

gk813

18

6SL312 7 - 1TE21 - 8AA3

1PH8103-1. F ...

0.81

5.8

0.894

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 - 1TE21 - 8AA3

1PH8105-1. F ...

0.78

8.7

0.911

0.0252 (0.223)

65 (143)

gk813

18

6SL312 7 - 1TE21 - 8AA3

1PH8107-1. F ...

0.79

10.8

0.901

0.0289 (0.256)

73 (161)

gk813

30

6SL312 7 - 1TE23 - 0AA3

1PH8131-1. F ...

0.86

9.2

0.931

0.0590 (0.522)

89 (196)

gk833

30

6SL312 7 - 1TE23 - 0AA3

1PH8133-1. F ...

0.85

13.5

0.933

0.0760 (0.673)

106 (234)

gk833

45

6SL312 7 - 1TE24 - 5AA3

1PH8135-1. F ...

0.84

18.1

0.929

0.0940 (0.832)

125 (276)

gk833

45

6SL312 7 - 1TE24 - 5AA3

1PH8137-1. F ...

0.84

23.1

0.931

0.1090 (0.965)

141 (311)

gk833

60

6SL312 7 - 1TE26 - 0AA3

1PH8163-1. F ...

0.86

24.6

0.932

0.2160 (1.912)

196 (432)

gk863

85

6SL312 7 - 1TE28 - 5AA3

1PH8165-1. F ...

0.89

23.6

0.936

0.2320 (2.053)

230 (507)

gk863

85

6SL312 7 - 1TE28 - 5AA3

1PH8083-1. G...

0.78

5.7

0.862

0.0064 (0.057)

32 (70.6)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8087-1. G...

0.79

6.5

0.884

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8103-1. G...

0.78

8.1

0.913

0.0172 (0.152)

51 (112)

gk813

18

6SL312 7 - 1TE21 - 8AA3

1PH8107-1. G...

0.77

12.8

0.932

0.0289 (0.256)

73 (161)

gk813

30

6SL312 7 - 1TE23 - 0AA3

1PH8133-1. G...

0.83

18.1

0.949

0.0760 (0.673)

106 (234)

gk833

45

6SL312 7 - 1TE24 - 5AA3

1PH8137-1. G...

0.83

22.4

0.941

0.1090 (0.965)

141 (311)

gk833

60

6SL312 7 - 1TE26 - 0AA3

1PH8163-1. G...

0.89

23.1

0.936

0.2160 (1.912)

196 (432)

gk863

85

6SL312 7 - 1TE28 - 5AA3

1PH8165-1. G...

0.87

28.9

0.932

0.2320 (2.053)

230 (507)

gk863

85

6SL312 7 - 1TE28 - 5AA3

1PH8083-1. M...

0.74

7.3

0.881

0.0064 (0.057)

32 (70.6)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8087-1. M...

0.73

9.2

0.878

0.0089 (0.079)

39 (86.0)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8103-1. M...

0.77

12.3

0.910

0.0172 (0.152)

51 (112)

gk813

30

6SL312 7 - 1TE23 - 0AA3

1PH8107-1. M...

0.77

12.3

0.910

0.0289 (0.256)

73 (161)

gk813

45

6SL312 7 - 1TE24 - 5AA3

Cooling:
Internal air cooling
External air cooling

1)
2)
3)

0
1

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position B to D).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz.
For lower power ratings, Motor Modules in blocksize format can be configured as an alternative
(levels of output current: 7.7 A/10.2 A/18 A).
Siemens PM 21 2011

5/13

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Forced ventilation

Line voltage 400 V 3 AC, Active Line Module (noise value 77 dB)
480

640

800

355

355

355

160 (215)

3183 (2348)

315

400

24.2

1150

2800

1PH8350-17 B17 - . .. 0

190 (255)

3780 (2788)

375

400

24.2

1150

2800

1PH8352-17 B17 - . .. 0

225 (302)

4477 (3302)

420

400

24.2

1150

2800

1PH8354-17 B17 - . .. 0

255 (342)

5073 (3742)

485

400

24.2

1150

2800

1PH8356-17 B17 - . .. 0

295 (396)

5869 (4329)

560

400

24.2

1150

2800

1PH8358-17 B17 - . .. 0

210 (282)

3134 (2312)

405

400

32.2

1150

2800

1PH8350-17 Q17 - . .. 0

250 (335)

3730 (2751)

475

400

32.2

1150

2800

1PH8352-17 Q17 - . .. 0

290 (389)

4327 (3192)

560

400

32.2

1150

2800

1PH8354-17 Q17 - . .. 0

335 (449)

4999 (3687)

640

400

32.2

1150

2800

1PH8356-17 Q17 - . .. 0

385 (516)

5745 (4238)

700

400

32.2

1150

2800

1PH8358-17 Q17 - . .. 0

250 (335)

2984 (2201)

490

400

40.2

1200

2800

1PH8350-17 C17 - . .. 0

305 (409)

3641 (2686)

570

400

40.2

1200

2800

1PH8352-17 C17 - . .. 0

355 (476)

4238 (3126)

650

400

40.2

1200

2800

1PH8354-17 C17 - . .. 0

410 (550)

4894 (3610)

750

400

40.2

1300

2800

1PH8356-17 C17 - . .. 0

2800

1PH8358-17 C17 - . .. 0

830

355

475 (637)

5444 (4015)

920

400

41.9

1350

1080

355

270 (362)

2388 (1761)

495

400

54.2

1450

2800

1PH8350-17 D17 - . .. 0

330 (443)

2918 (2152)

620

400

54.2

1450

2800

1PH8352-17 D17 - . .. 0

375 (503)

3316 (2446)

670

400

54.2

1400

2800

1PH8354-17 D17 - . .. 0

440 (590)

3891 (2870)

810

400

54.2

1400

2800

1PH8356-17 D17 - . .. 0

470 (630)

4156 (3065)

880

400

54.2

1400

2800

1PH8358-17 D17 - . .. 0
For versions, see
Order No. supplement
and options on page 5/58.

5/14

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Moment of
inertia

cos

Weight,
approx.

SINAMICS S120 Motor Module

Type

J
kgm2 (lbf-in-s2) kg (lb)

Terminal
box

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system
Order No.

1PH8350-1. B 1...

0.76

194

0.955

14.74 (130)

2235 (4928)

1XB7712-P01

380

6SL3320-1TE33- 8AA3

1PH8352-1. B 1...

0.77

223

0.957

17.40 (154)

2560 (5645)

1XB7712-P01

490

6SL3320-1TE35- 0AA3

1PH8354-1. B 1...

0.79

236

0.959

20.66 (183)

2889 (6370)

1XB7712-P03

490

6SL3320-1TE35- 0AA3

1PH8356-1. B 1...

0.78

285

0.961

24.22 (214)

3256 (7179)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8358-1. B 1...

0.79

316

0.962

27.79 (246)

3629 (8002)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8350-1. Q1...

0.77

235

0.961

14.74 (130)

2235 (4928)

1XB7712-P01

490

6SL3320-1TE35- 0AA3

1PH8352-1. Q1...

0.78

267

0.964

17.40 (154)

2560 (5645)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8354-1. Q1...

0.77

334

0.965

20.66 (183)

2889 (6370)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8356-1. Q1...

0.78

380

0.966

24.22 (214)

3256 (7179)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8358-1. Q1...

0.82

359

0.967

27.79 (246)

3629 (8002)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8350-1. C 1...

0.76

294

0.965

14.74 (130)

2235 (4928)

1XB7712-P01

745

6SL3320-1TE37- 5AA3

1PH8352-1. C 1...

0.80

302

0.967

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8354-1. C 1...

0.81

328

0.968

20.66 (183)

2889 (6370)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8356-1. C 1...

0.80

410

0.969

24.22 (214)

3256 (7179)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8358-1. C 1...

0.76

567

0.969

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8350-1. D 1...

0.82

235

0.968

14.74 (130)

2235 (4928)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8352-1. D 1...

0.79

338

0.969

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8354-1. D 1...

0.83

314

0.970

20.66 (183)

2889 (6370)

1XB7712-P03

8404)

6SL3320-1TE38- 4AA3

1PH8356-1. D 1...

0.80

433

0.970

24.22 (214)

3256 (7179)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8358-1. D 1...

0.79

489

0.970

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1)
2)
3)
4)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A, B, E or F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2.5 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2.5 kHz.
Siemens PM 21 2011

5/15

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Forced ventilation

Line voltage 480 V 3 AC, Smart/Basic Line Module (noise value 77 dB)
550

750

900

1250

355

355

355

355

185 (248)

3212 (2369)

320

460

27.7

1400

2800

1PH8350-17 B17 - . .. 0

220 (295)

3820 (2818)

375

460

27.7

1400

2800

1PH8352-17 B17 - . .. 0

255 (342)

4428 (3266)

420

460

27.7

1400

2800

1PH8354-17 B17 - . .. 0

295 (396)

5122 (3778)

490

460

27.7

1400

2800

1PH8356-17 B17 - . .. 0

340 (456)

5904 (4355)

560

460

27.7

1400

2800

1PH8358-17 B17 - . .. 0

245 (329)

3120 (2301)

405

465

37.7

1400

2800

1PH8350-17 Q17 - . .. 0

295 (396)

3756 (2770)

475

465

37.7

1400

2800

1PH8352-17 Q17 - . .. 0

340 (456)

4329 (3193)

560

465

37.7

1400

2800

1PH8354-17 Q17 - . .. 0

395 (530)

5030 (3710)

640

465

37.7

1400

2800

1PH8356-17 Q17 - . .. 0

450 (603)

5730 (4226)

700

465

37.7

1400

2800

1PH8358-17 Q17 - . .. 0

280 (375)

2971 (2191)

490

450

45.2

1500

2800

1PH8350-17 C17 - . .. 0

340 (456)

3608 (2661)

560

450

45.2

1500

2800

1PH8352-17 C17 - . .. 0

400 (536)

4244 (3130)

650

450

45.2

1500

2800

1PH8354-17 C17 - . .. 0

460 (617)

4881 (3600)

760

450

45.2

1600

2800

1PH8356-17 C17 - . .. 0

515 (691)

5465 (4031)

920

430

45.2

1600

2800

1PH8358-17 C17 - . .. 0

315 (422)

2407 (1775)

495

460

62.7

1800

2800

1PH8350-17 D17 - . .. 0

380 (510)

2903 (2141)

620

460

62.7

1800

2800

1PH8352-17 D17 - . .. 0

435 (583)

3323 (2451)

670

460

62.7

1700

2800

1PH8354-17 D17 - . .. 0

510 (684)

3896 (2874)

810

460

62.7

1700

2800

1PH8356-17 D17 - . .. 0

545 (731)

4164 (3071)

880

460

62.7

1700

2800

1PH8358-17 D17 - . .. 0

Line voltage 480 V 3 AC, Active Line Module (noise value 77 dB)
600

800

1000

1350

355

355

355

355

200 (268)

3183 (2348)

315

500

30.2

1400

2800

1PH8350-17 B17 - . .. 0

240 (322)

3820 (2818)

375

500

30.2

1400

2800

1PH8352-17 B17 - . .. 0

280 (375)

4457 (3287)

420

500

30.2

1400

2800

1PH8354-17 B17 - . .. 0

320 (429)

5093 (3757)

485

500

30.2

1400

2800

1PH8356-17 B17 - . .. 0

370 (496)

5889 (4344)

560

500

30.2

1400

2800

1PH8358-17 B17 - . .. 0

260 (349)

3104 (2290)

405

500

40.2

1400

2800

1PH8350-17 Q17 - . .. 0

315 (422)

3760 (2773)

475

500

40.2

1400

2800

1PH8352-17 Q17 - . .. 0

365 (489)

4357 (3214)

560

500

40.2

1400

2800

1PH8354-17 Q17 - . .. 0

420 (563)

5014 (3698)

640

500

40.2

1400

2800

1PH8356-17 Q17 - . .. 0

480 (644)

5730 (4226)

700

500

40.2

1400

2800

1PH8358-17 Q17 - . .. 0

310 (416)

2961 (2184)

490

500

50.2

1500

2800

1PH8350-17 C17 - . .. 0

380 (510)

3629 (2677)

570

500

50.2

1500

2800

1PH8352-17 C17 - . .. 0

445 (597)

4250 (3135)

650

500

50.2

1500

2800

1PH8354-17 C17 - . .. 0

510 (684)

4871 (3593)

750

500

50.2

1600

2800

1PH8356-17 C17 - . .. 0

570 (764)

5444 (4015)

920

480

50.2

1600

2800

1PH8358-17 C17 - . .. 0

340 (456)

2405 (1774)

495

500

67.7

1800

2800

1PH8350-17 D17 - . .. 0

410 (550)

2900 (2139)

620

500

67.7

1800

2800

1PH8352-17 D17 - . .. 0

470 (630)

3325 (2453)

670

500

67.7

1700

2800

1PH8354-17 D17 - . .. 0

550 (738)

3891 (2870)

810

500

67.7

1700

2800

1PH8356-17 D17 - . .. 0

590 (791)

4174 (3079)

880

500

67.7

1700

2800

1PH8358-17 D17 - . .. 0
For versions, see
Order No. supplement
and options on page 5/58.

5/16

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

J
kgm2

(lbf-in-s2)

Weight,
approx.

kg (lb)

Terminal
box

Type

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8350-1. B 1...

0.75

197

0.958

14.74 (130)

2235 (4928)

1XB7712-P01

380

6SL3320- 1TE33 - 8AA3

1PH8352-1. B 1...

0.77

225

0.960

17.40 (154)

2560 (5645)

1XB7712-P01

490

6SL3320- 1TE35 - 0AA3

1PH8354-1. B 1...

0.79

238

0.962

20.66 (183)

2889 (6370)

1XB7712-P03

490

6SL3320- 1TE35 - 0AA3

1PH8356-1. B 1...

0.78

287

0.963

24.22 (214)

3256 (7179)

1XB7712-P03

745

6SL3320- 1TE37 - 5AA3

1PH8358-1. B 1...

0.79

321

0.965

27.79 (246)

3629 (8002)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8350-1. Q1...

0.77

231

0.964

14.74 (130)

2235 (4928)

1XB7712-P01

490

6SL3320- 1TE35 - 0AA3

1PH8352-1. Q1...

0.79

262

0.966

17.40 (154)

2560 (5645)

1XB7712-P03

745

6SL3320- 1TE37 - 5AA3

1PH8354-1. Q1...

0.78

328

0.967

20.66 (183)

2889 (6370)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8356-1. Q1...

0.78

372

0.968

24.22 (214)

3256 (7179)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8358-1. Q1...

0.82

351

0.969

27.79 (246)

3629 (8002)

1XB7712-P03

985

6SL3320- 1TE41 - 0AA3

1PH8350-1. C 1...

0.76

295

0.966

14.74 (130)

2235 (4928)

1XB7712-P01

745

6SL3320- 1TE37 - 5AA3

1PH8352-1. C 1...

0.80

303

0.968

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8354-1. C 1...

0.81

328

0.969

20.66 (183)

2889 (6370)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8356-1. C 1...

0.80

410

0.970

24.22 (214)

3256 (7179)

1XB7712-P03

985

6SL3320- 1TE41 - 0AA3

1PH8358-1. C 1...

0.77

557

0.970

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320- 1TE41 - 2AA3

1PH8350-1. D 1...

0.82

232

0.969

14.74 (130)

2235 (4928)

1XB7712-P03

745

6SL3320- 1TE37 - 5AA3

1PH8352-1. D 1...

0.79

329

0.969

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8354-1. D 1...

0.83

311

0.971

20.66 (183)

2889 (6370)

1XB7712-P03

8404)

6SL3320- 1TE38 - 4AA3

1PH8356-1. D 1...

0.81

427

0.971

24.22 (214)

3256 (7179)

1XB7712-P03

985

6SL3320- 1TE41 - 0AA3

1PH8358-1. D 1...

0.80

484

0.971

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320- 1TE41 - 2AA3

1PH8350-1. B 1...

0.75

194

0.960

14.74 (130)

2235 (4928)

1XB7712-P01

380

6SL3320- 1TE33 - 8AA3

1PH8352-1. B 1...

0.77

223

0.962

17.40 (154)

2560 (5645)

1XB7712-P01

490

6SL3320- 1TE35 - 0AA3

1PH8354-1. B 1...

0.79

236

0.964

20.66 (183)

2889 (6370)

1XB7712-P03

490

6SL3320- 1TE35 - 0AA3

1PH8356-1. B 1...

0.78

285

0.965

24.22 (214)

3256 (7179)

1XB7712-P03

745

6SL3320- 1TE37 - 5AA3

1PH8358-1. B 1...

0.79

316

0.966

27.79 (246)

3629 (8002)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8350-1. Q1...

0.77

235

0.965

14.74 (130)

2235 (4928)

1XB7712-P01

490

6SL3320- 1TE35 - 0AA3

1PH8352-1. Q1...

0.78

267

0.967

17.40 (154)

2560 (5645)

1XB7712-P03

745

6SL3320- 1TE37 - 5AA3

1PH8354-1. Q1...

0.77

334

0.967

20.66 (183)

2889 (6370)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8356-1. Q1...

0.78

380

0.968

24.22 (214)

3256 (7179)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8358-1. Q1...

0.82

359

0.970

27.79 (246)

3629 (8002)

1XB7712-P03

985

6SL3320- 1TE41 - 0AA3

1PH8350-1. C 1...

0.75

294

0.967

14.74 (130)

2235 (4928)

1XB7712-P01

745

6SL3320- 1TE37 - 5AA3

1PH8352-1. C 1...

0.80

302

0.969

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8354-1. C 1...

0.81

328

0.970

20.66 (183)

2889 (6370)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8356-1. C 1...

0.80

410

0.970

24.22 (214)

3256 (7179)

1XB7712-P03

985

6SL3320- 1TE41 - 0AA3

1PH8358-1. C 1...

0.76

567

0.970

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320- 1TE41 - 2AA3

1PH8350-1. D 1...

0.82

235

0.969

14.74 (130)

2235 (4928)

1XB7712-P03

745

6SL3320- 1TE37 - 5AA3

1PH8352-1. D 1...

0.79

338

0.969

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320- 1TE38 - 4AA3

1PH8354-1. D 1...

0.83

314

0.971

20.66 (183)

2889 (6370)

1XB7712-P03

8404)

6SL3320- 1TE38 - 4AA3

1PH8356-1. D 1...

0.80

433

0.971

24.22 (214)

3256 (7179)

1XB7712-P03

985

6SL3320- 1TE41 - 0AA3

1PH8358-1. D 1...

0.79

489

0.970

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320- 1TE41 - 2AA3

1)
2)
3)
4)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A, B, E or F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2.5 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2.5 kHz.
Siemens PM 21 2011

5/17

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Forced ventilation

Line voltage 690 V 3 AC, Basic Line Module (noise value 77 dB)
550

750

900

1250

355

355

355

355

185 (248)

3212 (2369)

230

635

27.7

1400

2800

1PH8350-17 H17 - . .. 0

220 (295)

3820 (2818)

265

635

27.7

1400

2800

1PH8352-17 H17 - . .. 0

255 (342)

4428 (3266)

305

635

27.7

1400

2800

1PH8354-17 H17 - . .. 0

295 (396)

5122 (3778)

355

635

27.7

1400

2800

1PH8356-17 H17 - . .. 0

340 (456)

5904 (4355)

410

635

27.7

1400

2800

1PH8358-17 H17 - . .. 0

245 (329)

3120 (2301)

290

650

37.7

1400

2800

1PH8350-17 K17 - . .. 0

295 (396)

3756 (2770)

350

650

37.7

1400

2800

1PH8352-17 K17 - . .. 0

340 (456)

4329 (3193)

390

650

37.7

1400

2800

1PH8354-17 K17 - . .. 0

395 (530)

5030 (3710)

455

650

37.7

1400

2800

1PH8356-17 K17 - . .. 0

450 (603)

5730 (4226)

510

650

37.7

1400

2800

1PH8358-17 K17 - . .. 0

280 (375)

2971 (2191)

355

620

45.2

1500

2800

1PH8350-17 U17 - . .. 0

340 (456)

3608 (2661)

415

620

45.2

1500

2800

1PH8352-17 U17 - . .. 0

400 (536)

4244 (3130)

480

620

45.2

1500

2800

1PH8354-17 U17 - . .. 0

460 (617)

4881 (3600)

540

620

45.2

1600

2800

1PH8356-17 U17 - . .. 0

515 (691)

5465 (4031)

620

620

45.2

1600

2800

1PH8358-17 U17 - . .. 0

315 (422)

2407 (1775)

360

640

62.7

1800

2800

1PH8350-17 V17 - . .. 0

380 (510)

2903 (2141)

430

640

62.7

1800

2800

1PH8352-17 V17 - . .. 0

435 (583)

3323 (2451)

480

640

62.7

1700

2800

1PH8354-17 V17 - . .. 0

510 (684)

3896 (2874)

590

640

62.7

1700

2800

1PH8356-17 V17 - . .. 0

545 (731)

4164 (3071)

620

640

62.7

1700

2800

1PH8358-17 V17 - . .. 0

Line voltage 690 V 3 AC, Active Line Module (noise value 77 dB)
600

800

1000

1350

355

355

355

355

200 (268)

3183 (2348)

230

690

30.2

1400

2800

1PH8350-17 H17 - . .. 0

240 (322)

3820 (2818)

265

690

30.2

1400

2800

1PH8352-17 H17 - . .. 0

280 (375)

4457 (3287)

310

690

30.2

1400

2800

1PH8354-17 H17 - . .. 0

320 (429)

5093 (3757)

355

690

30.2

1400

2800

1PH8356-17 H17 - . .. 0

370 (496)

5889 (4344)

410

690

30.2

1400

2800

1PH8358-17 H17 - . .. 0

260 (349)

3104 (2290)

290

690

40.2

1400

2800

1PH8350-17 K17 - . .. 0

315 (422)

3760 (2773)

350

690

40.2

1400

2800

1PH8352-17 K17 - . .. 0

365 (489)

4357 (3214)

395

690

40.2

1400

2800

1PH8354-17 K17 - . .. 0

420 (563)

5014 (3698)

453

690

40.2

1400

2800

1PH8356-17 K17 - . .. 0

480 (644)

5730 (4226)

510

690

40.2

1400

2800

1PH8358-17 K17 - . .. 0

310 (416)

2961 (2184)

355

690

50.2

1500

2800

1PH8350-17 U17 - . .. 0

380 (510)

3629 (2677)

415

690

50.2

1500

2800

1PH8352-17 U17 - . .. 0

445 (597)

4250 (3135)

480

690

50.2

1500

2800

1PH8354-17 U17 - . .. 0

510 (684)

4871 (3593)

540

690

50.2

1600

2800

1PH8356-17 U17 - . .. 0

570 (764)

5444 (4015)

610

690

50.2

1600

2800

1PH8358-17 U17 - . .. 0

340 (456)

2405 (1774)

360

690

67.7

1800

2800

1PH8350-17 V17 - . .. 0

410 (550)

2900 (2139)

430

690

67.7

1800

2800

1PH8352-17 V17 - . .. 0

470 (630)

3325 (2453)

485

690

67.7

1700

2800

1PH8354-17 V17 - . .. 0

550 (738)

3891 (2870)

590

690

67.7

1700

2800

1PH8356-17 V17 - . .. 0

590 (791)

4174 (3079)

620

690

67.7

1700

2800

1PH8358-17 V17 - . .. 0
For versions, see
Order No. supplement
and options on page 5/58.

5/18

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

J
kgm2

(lbf-in-s2)

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

kg (lb)

Type

Order No.

1PH8350-1. H 1...

0.76

140

0.959

14.74 (130)

2235 (4928)

1XB7712-P01

2604)

6SL3320-1TG32- 6AA3

1PH8352-1. H 1...

0.78

151

0.960

17.40 (154)

2560 (5645)

1XB7712-P01

330

6SL3320-1TG33- 3AA3

1PH8354-1. H 1...

0.78

178

0.962

20.66 (183)

2889 (6370)

1XB7712-P01

410

6SL3320-1TG34- 1AA3

1PH8356-1. H 1...

0.78

211

0.964

24.22 (214)

3256 (7179)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8358-1. H 1...

0.78

247

0.964

27.79 (246)

3629 (8002)

1XB7712-P01

4654)

6SL3320-1TG34- 7AA3

1PH8350-1. K 1...

0.78

164

0.964

14.74 (130)

2235 (4928)

1XB7712-P01

410

6SL3320-1TG34- 1AA3

1PH8352-1. K 1...

0.77

210

0.965

17.40 (154)

2560 (5645)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8354-1. K 1...

0.79

218

0.967

20.66 (183)

2889 (6370)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8356-1. K 1...

0.80

252

0.968

24.22 (214)

3256 (7179)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8358-1. K 1...

0.81

275

0.969

27.79 (246)

3629 (8002)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8350-1. U 1...

0.75

216

0.966

14.74 (130)

2235 (4928)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8352-1. U 1...

0.79

231

0.968

17.40 (154)

2560 (5645)

1XB7712-P01

575

6SL3320-1TG35- 8AA3

1PH8354-1. U 1...

0.79

268

0.969

20.66 (183)

2889 (6370)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8356-1. U 1...

0.81

283

0.970

24.22 (214)

3256 (7179)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8358-1. U 1...

0.80

338

0.971

27.79 (246)

3629 (8002)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8350-1. V 1...

0.81

179

0.969

14.74 (130)

2235 (4928)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8352-1. V 1...

0.82

208

0.970

17.40 (154)

2560 (5645)

1XB7712-P01

575

6SL3320-1TG35- 8AA3

1PH8354-1. V 1...

0.83

220

0.971

20.66 (183)

2889 (6370)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8356-1. V 1...

0.80

319

0.971

24.22 (214)

3256 (7179)

1XB7712-P03

7354)

6SL3320-1TG37- 4AA3

1PH8358-1. V 1...

0.81

322

0.971

27.79 (246)

3629 (8002)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8350-1. H 1...

0.76

139

0.961

14.74 (130)

2235 (4928)

1XB7712-P01

2604)

6SL3320-1TG32- 6AA3

1PH8352-1. H 1...

0.78

149

0.961

17.40 (154)

2560 (5645)

1XB7712-P01

330

6SL3320-1TG33- 3AA3

1PH8354-1. H 1...

0.79

176

0.964

20.66 (183)

2889 (6370)

1XB7712-P01

410

6SL3320-1TG34- 1AA3

1PH8356-1. H 1...

0.78

209

0.965

24.22 (214)

3256 (7179)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8358-1. H 1...

0.78

242

0.966

27.79 (246)

3629 (8002)

1XB7712-P01

4654)

6SL3320-1TG34- 7AA3

1PH8350-1. K 1...

0.78

162

0.965

14.74 (130)

2235 (4928)

1XB7712-P01

410

6SL3320-1TG34- 1AA3

1PH8352-1. K 1...

0.77

207

0.966

17.40 (154)

2560 (5645)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8354-1. K 1...

0.80

215

0.968

20.66 (183)

2889 (6370)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8356-1. K 1...

0.80

249

0.969

24.22 (214)

3256 (7179)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8358-1. K 1...

0.81

272

0.970

27.79 (246)

3629 (8002)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8350-1. U 1...

0.75

216

0.967

14.74 (130)

2235 (4928)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8352-1. U 1...

0.78

232

0.968

17.40 (154)

2560 (5645)

1XB7712-P01

575

6SL3320-1TG35- 8AA3

1PH8354-1. U 1...

0.79

269

0.969

20.66 (183)

2889 (6370)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8356-1. U 1...

0.81

283

0.971

24.22 (214)

3256 (7179)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8358-1. U 1...

0.80

339

0.971

27.79 (246)

3629 (8002)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8350-1. V 1...

0.81

178

0.969

14.74 (130)

2235 (4928)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8352-1. V 1...

0.82

208

0.970

17.40 (154)

2560 (5645)

1XB7712-P01

575

6SL3320-1TG35- 8AA3

1PH8354-1. V 1...

0.84

219

0.971

20.66 (183)

2889 (6370)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8356-1. V 1...

0.80

317

0.970

24.22 (214)

3256 (7179)

1XB7712-P03

7354)

6SL3320-1TG37- 4AA3

1PH8358-1. V 1...

0.81

322

0.971

27.79 (246)

3629 (8002)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1)
2)
3)
4)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A, B, E or F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2.5 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2.5 kHz.
Siemens PM 21 2011

5/19

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Forced ventilation

Line voltage 400 V 3 AC, Active Line Module (noise value 77 dB)
480

640

800

355

355

355

275 (369)

5471 (4035)

495

400

24.4

850

2800

1PH8350-17 B4 7 - ... 0

310 (416)

6168 (4550)

550

400

24.5

850

2800

1PH8351-17 B4 7 - ... 0

370 (496)

7361 (5429)

650

400

24.5

800

2800

1PH8352-17 B4 7 - ... 0

435 (583)

8655 (6384)

750

400

24.5

800

2800

1PH8354-17 B4 7 - ... 0

510 (684)

10147 (7484)

880

400

24.4

700

2800

1PH8356-17 B4 7 - ... 0

585 (784)

11639 (8585)

990

400

24.4

700

2800

1PH8358-17 B4 7 - ... 0

340 (456)

5073 (3742)

600

400

32.4

1100

2800

1PH8350-17 Q4 7 - ... 0

375 (503)

5596 (4128)

660

400

32.4

1100

2800

1PH8351-17 Q4 7 - ... 0

455 (610)

6789 (5008)

790

400

32.4

1000

2800

1PH8352-17 Q4 7 - ... 0

535 (717)

7983 (5888)

930

400

32.4

1000

2800

1PH8354-17 Q4 7 - ... 0

625 (838)

9326 (6879)

1060

400

32.4

950

2800

1PH8356-17 Q4 7 - ... 0

705 (945)

10520 (7760)

1180

400

32.4

950

2800

1PH8358-17 Q4 7 - ... 0

435 (583)

5193 (3830)

770

400

40.4

1200

2800

1PH8350-17 C4 7 - ... 0

490 (657)

5849 (4314)

860

400

40.4

1200

2800

1PH8351-17 C4 7 - ... 0

570 (764)

6804 (5019)

980

400

40.5

1100

2800

1PH8352-17 C4 7 - ... 0

665 (892)

7938 (5855)

1120

400

40.4

1000

2800

1PH8354-17 C4 7 - ... 0

760 (1019)

9073 (6692)

1280

400

40.4

950

2800

1PH8356-17 C4 7 - ... 0

830

355

915 (1227)

10486 (7734)

1560

400

42.0

1000

2800

1PH8358-17 C4 7 - ... 0

1080

355

485 (650)

4289 (3164)

830

400

54.4

1350

2800

1PH8350-17 D4 7 - ... 0

545 (731)

4819 (3554)

940

400

54.5

1350

2800

1PH8351-17 D4 7 - ... 0

655 (878)

5792 (4272)

1120

400

54.4

1350

2800

1PH8352-17 D4 7 - ... 0

760 (1019)

6720 (4957)

1280

400

54.5

1100

2800

1PH8354-17 D4 7 - ... 0

855 (1147)

7560 (5576)

1440

400

54.4

1100

2800

1PH8356-17 D4 7 - ... 0

985 (1321)

8710 (6424)

1640

400

54.4

1100

2800

1PH8358-17 D4 7 - ... 0
For versions, see
Order No. supplement
and options on page 5/58.

5/20

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

Weight,
approx.

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system
Order No.

1PH8350-1. B 4 ...

0.84

194

0.944

14.74 (130)

2235 (4928)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8351-1. B 4 ...

0.85

194

0.938

14.74 (130)

2235 (4928)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8352-1. B 4 ...

0.86

223

0.942

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8354-1. B 4 ...

0.88

236

0.943

20.66 (183)

2889 (6370)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8356-1. B 4 ...

0.88

285

0.946

24.22 (214)

3256 (7179)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8358-1. B 4 ...

0.89

316

0.948

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8350-1. Q 4 ...

0.84

235

0.956

14.74 (130)

2235 (4928)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8351-1. Q 4 ...

0.85

235

0.953

14.74 (130)

2235 (4928)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8352-1. Q 4 ...

0.86

267

0.955

17.40 (154)

2560 (5645)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8354-1. Q 4 ...

0.86

334

0.958

20.66 (183)

2889 (6370)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8356-1. Q 4 ...

0.87

380

0.959

24.22 (214)

3256 (7179)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8358-1. Q 4 ...

0.89

359

0.958

27.79 (246)

3629 (8002)

1XB7820-P00

1405

6SL3320-1TE41- 4AA3

1PH8350-1. C 4 ...

0.84

294

0.961

14.74 (130)

2235 (4928)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8351-1. C 4 ...

0.85

294

0.958

14.74 (130)

2235 (4928)

1XB7712-P03

9854)

6SL3320-1TE41- 0AA3

1PH8352-1. C 4 ...

0.87

302

0.960

17.40 (154)

2560 (5645)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

4)

1PH8354-1. C 4 ...

0.88

328

0.961

20.66 (183)

2889 (6370)

1XB7712-P03

1260

1PH8356-1. C 4 ...

0.88

410

0.964

24.22 (214)

3256 (7179)

1XB7820-P00

1405

1PH8358-1. C 4 ...

0.87

567

0.967

27.79 (246)

3629 (8002)

1XB7820-P00

2 985

1PH8350-1. D 4 ...

0.86

235

0.965

14.74 (130)

2235 (4928)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8351-1. D 4 ...

0.86

235

0.963

14.74 (130)

2235 (4928)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8352-1. D 4 ...

0.87

338

0.967

17.40 (154)

2560 (5645)

1XB7712-P03

12604)

6SL3320-1TE41- 2AA3

1PH8354-1. D 4 ...

0.88

314

0.966

20.66 (183)

2889 (6370)

1XB7820-P00

1405

1PH8356-1. D 4 ...

0.88

433

0.970

24.22 (214)

3256 (7179)

1XB7820-P00

2 985

2 6SL3320-1TE41- 0AA3

1PH8358-1. D 4 ...

0.89

489

0.971

27.79 (246)

3629 (8002)

1XB7820-P00

2 9854)

2 6SL3320-1TE41- 0AA3

1)
2)
3)
4)

6SL3320-1TE41- 2AA3
6SL3320-1TE41- 4AA3
2 6SL3320-1TE41- 0AA3

6SL3320-1TE41- 4AA3

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A, B, E or F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2.5 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2.5 kHz.
Siemens PM 21 2011

5/21

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Forced ventilation

Line voltage 480 V 3 AC, Smart/Basic Line Module (noise value 77 dB)
550

750

900

1250

355

355

355

355

315 (422)

5470 (4035)

490

460

27.9

1100

2800

1PH8350-17 B4 7 - ... 0

355 (476)

6164 (4547)

550

460

28.0

1100

2800

1PH8351-17 B4 7 - ... 0

420 (563)

7293 (5379)

640

460

27.9

1000

2800

1PH8352-17 B4 7 - ... 0

500 (671)

8682 (6404)

750

460

28.0

1000

2800

1PH8354-17 B4 7 - ... 0

585 (784)

10158 (7493)

870

460

27.9

900

2800

1PH8356-17 B4 7 - ... 0

670 (898)

11634 (8581)

990

460

27.9

900

2800

1PH8358-17 B4 7 - ... 0

400 (536)

5093 (3757)

610

465

37.9

1400

2800

1PH8350-17 Q4 7 - ... 0

440 (590)

5603 (4133)

670

465

37.9

1400

2800

1PH8351-17 Q4 7 - ... 0

535 (717)

6812 (5025)

800

465

37.9

1300

2800

1PH8352-17 Q4 7 - ... 0

630 (845)

8022 (5917)

930

465

37.9

1300

2800

1PH8354-17 Q4 7 - ... 0

730 (979)

9295 (6856)

1080

465

37.9

1200

2800

1PH8356-17 Q4 7 - ... 0

825 (1106)

10505 (7748)

1200

465

37.9

1200

2800

1PH8358-17 Q4 7 - ... 0

490 (657)

5199 (3835)

770

450

45.4

1500

2800

1PH8350-17 C4 7 - ... 0

550 (738)

5836 (4305)

860

450

45.4

1500

2800

1PH8351-17 C4 7 - ... 0

640 (858)

6791 (5009)

980

450

45.5

1400

2800

1PH8352-17 C4 7 - ... 0

745 (999)

7905 (5831)

1120

450

45.4

1300

2800

1PH8354-17 C4 7 - ... 0

855 (1147)

9073 (6692)

1280

450

45.4

1200

2800

1PH8356-17 C4 7 - ... 0

990 (1328)

10505 (7748)

1560

430

45.4

1200

2800

1PH8358-17 C4 7 - ... 0

560 (751)

4278 (3155)

840

460

62.9

1700

2800

1PH8350-17 D4 7 - ... 0

630 (845)

4813 (3550)

940

460

63.0

1700

2800

1PH8351-17 D4 7 - ... 0

760 (1019)

5806 (4283)

1120

460

62.9

1700

2800

1PH8352-17 D4 7 - ... 0

880 (1180)

6723 (4959)

1280

460

63.0

1400

2800

1PH8354-17 D4 7 - ... 0

990 (1328)

7564 (5579)

1440

460

62.9

1400

2800

1PH8356-17 D4 7 - ... 0

1140 (1529)

8710 (6424)

1660

460

62.9

1400

2800

1PH8358-17 D4 7 - ... 0
For versions, see
Order No. supplement
and options on page 5/58.

5/22

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

Weight,
approx.

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system
Order No.

1PH8350-1. B 4 ...

0.84

197

0.950

14.74 (130)

2235 (4928)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8351-1. B 4 ...

0.85

197

0.945

14.74 (130)

2235 (4928)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8352-1. B 4 ...

0.86

225

0.949

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8354-1. B 4 ...

0.88

238

0.949

20.66 (183)

2889 (6370)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8356-1. B 4 ...

0.88

287

0.952

24.22 (214)

3256 (7179)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8358-1. B 4 ...

0.88

321

0.953

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8350-1. Q 4 ...

0.84

231

0.960

14.74 (130)

2235 (4928)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8351-1. Q 4 ...

0.85

231

0.958

14.74 (130)

2235 (4928)

1XB7712-P03

8404)

6SL3320-1TE38- 4AA3

1PH8352-1. Q 4 ...

0.86

262

0.959

17.40 (154)

2560 (5645)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8354-1. Q 4 ...

0.87

328

0.962

20.66 (183)

2889 (6370)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8356-1. Q 4 ...

0.87

372

0.963

24.22 (214)

3256 (7179)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8358-1. Q 4 ...

0.89

351

0.962

27.79 (246)

3629 (8002)

1XB7820-P00

1405

6SL3320-1TE41- 4AA3

1PH8350-1. C 4 ...

0.84

295

0.964

14.74 (130)

2235 (4928)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8351-1. C 4 ...

0.85

295

0.961

14.74 (130)

2235 (4928)

1XB7712-P03

9854)

6SL3320-1TE41- 0AA3

1PH8352-1. C 4 ...

0.87

303

0.963

17.40 (154)

2560 (5645)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

4)

1PH8354-1. C 4 ...

0.88

328

0.964

20.66 (183)

2889 (6370)

1XB7712-P03

1260

1PH8356-1. C 4 ...

0.88

410

0.966

24.22 (214)

3256 (7179)

1XB7820-P00

1405

1PH8358-1. C 4 ...

0.87

557

0.968

27.79 (246)

3629 (8002)

1XB7820-P00

2 985

1PH8350-1. D 4 ...

0.86

232

0.968

14.74 (130)

2235 (4928)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8351-1. D 4 ...

0.86

232

0.966

14.74 (130)

2235 (4928)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8352-1. D 4 ...

0.87

329

0.969

17.40 (154)

2560 (5645)

1XB7712-P03

12604)

6SL3320-1TE41- 2AA3

1PH8354-1. D 4 ...

0.88

311

0.969

20.66 (183)

2889 (6370)

1XB7820-P00

1405

1PH8356-1. D 4 ...

0.88

427

0.972

24.22 (214)

3256 (7179)

1XB7820-P00

2 985

2 6SL3320-1TE41- 0AA3

1PH8358-1. D 4 ...

0.89

484

0.972

27.79 (246)

3629 (8002)

1XB7820-P00

2 9854)

2 6SL3320-1TE41- 0AA3

1)
2)
3)
4)

6SL3320-1TE41- 2AA3
6SL3320-1TE41- 4AA3
2 6SL3320-1TE41- 0AA3

6SL3320-1TE41- 4AA3

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A, B, E or F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2.5 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2.5 kHz.
Siemens PM 21 2011

5/23

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Forced ventilation

Line voltage 480 V 3 AC, Active Line Module (noise value 77 dB)
600

800

1000

1350

355

355

355

355

345 (463)

5491 (4050)

495

500

30.4

1100

2800

1PH8350-17 B 4 7 - ... 0

385 (516)

6128 (4520)

550

500

30.5

1100

2800

1PH8351-17 B 4 7 - ... 0

460 (617)

7322 (5401)

650

500

30.4

1000

2800

1PH8352-17 B 4 7 - ... 0

545 (731)

8675 (6399)

750

500

30.5

1000

2800

1PH8354-17 B 4 7 - ... 0

640 (858)

10187 (7514)

880

500

30.4

900

2800

1PH8356-17 B 4 7 - ... 0

730 (979)

11619 (8570)

990

500

30.4

900

2800

1PH8358-17 B 4 7 - ... 0

425 (570)

5073 (3742)

600

500

40.4

1400

2800

1PH8350-17 Q4 7 - ... 0

470 (630)

5611 (4139)

660

500

40.4

1400

2800

1PH8351-17 Q4 7 - ... 0

570 (764)

6804 (5019)

790

500

40.4

1300

2800

1PH8352-17 Q4 7 - ... 0

670 (898)

7998 (5899)

930

500

40.4

1300

2800

1PH8354-17 Q4 7 - ... 0

780 (1046)

9311 (6868)

1060

500

40.4

1200

2800

1PH8356-17 Q4 7 - ... 0

880 (1180)

10505 (7748)

1180

500

40.4

1200

2800

1PH8358-17 Q4 7 - ... 0

545 (731)

5205 (3839)

770

500

50.4

1500

2800

1PH8350-17 C 4 7 - ... 0

610 (818)

5826 (4297)

860

500

50.4

1500

2800

1PH8351-17 C 4 7 - ... 0

710 (952)

6781 (5002)

980

500

50.5

1400

2800

1PH8352-17 C 4 7 - ... 0

830 (1113)

7927 (5847)

1120

500

50.4

1300

2800

1PH8354-17 C 4 7 - ... 0

950 (1274)

9073 (6692)

1280

500

50.4

1200

2800

1PH8356-17 C 4 7 - ... 0

1100 (1475)

10505 (7748)

1560

480

50.4

1200

2800

1PH8358-17 C 4 7 - ... 0

605 (811)

4280 (3157)

830

500

67.9

1700

2800

1PH8350-17 D 4 7 - ... 0

680 (912)

4810 (3548)

940

500

68.0

1700

2800

1PH8351-17 D 4 7 - ... 0

820 (1100)

5801 (4279)

1120

500

67.9

1700

2800

1PH8352-17 D 4 7 - ... 0

950 (1274)

6720 (4957)

1280

500

68.0

1400

2800

1PH8354-17 D 4 7 - ... 0

1070 (1435)

7569 (5583)

1440

500

67.9

1400

2800

1PH8356-17 D 4 7 - ... 0

1230 (1649)

8701 (6418)

1640

500

67.9

1400

2800

1PH8358-17 D 4 7 - ... 0
For versions, see
Order No. supplement
and options on page 5/58.

5/24

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

Weight,
approx.

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system
Order No.

1PH8350-1. B 4 ...

0.84

194

0.953

14.74 (130)

2235 (4928)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8351-1. B 4 ...

0.85

194

0.949

14.74 (130)

2235 (4928)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8352-1. B 4 ...

0.86

223

0.951

17.40 (154)

2560 (5645)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8354-1. B 4 ...

0.87

236

0.952

20.66 (183)

2889 (6370)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8356-1. B 4 ...

0.88

285

0.954

24.22 (214)

3256 (7179)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8358-1. B 4 ...

0.88

316

0.956

27.79 (246)

3629 (8002)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8350-1. Q 4 ...

0.84

235

0.962

14.74 (130)

2235 (4928)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8351-1. Q 4 ...

0.85

235

0.960

14.74 (130)

2235 (4928)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8352-1. Q 4 ...

0.86

267

0.961

17.40 (154)

2560 (5645)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8354-1. Q 4 ...

0.86

334

0.964

20.66 (183)

2889 (6370)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8356-1. Q 4 ...

0.87

380

0.965

24.22 (214)

3256 (7179)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8358-1. Q 4 ...

0.89

359

0.964

27.79 (246)

3629 (8002)

1XB7820-P00

1405

6SL3320-1TE41- 4AA3

1PH8350-1. C 4 ...

0.84

294

0.966

14.74 (130)

2235 (4928)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8351-1. C 4 ...

0.85

294

0.964

14.74 (130)

2235 (4928)

1XB7712-P03

9854)

6SL3320-1TE41- 0AA3

1PH8352-1. C 4 ...

0.86

302

0.965

17.40 (154)

2560 (5645)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

4)

1PH8354-1. C 4 ...

0.88

328

0.966

20.66 (183)

2889 (6370)

1XB7712-P03

1260

1PH8356-1. C 4 ...

0.88

410

0.968

24.22 (214)

3256 (7179)

1XB7820-P00

1405

1PH8358-1. C 4 ...

0.87

567

0.970

27.79 (246)

3629 (8002)

1XB7820-P00

2 985

1PH8350-1. D 4 ...

0.86

235

0.969

14.74 (130)

2235 (4928)

1XB7712-P03

985

6SL3320-1TE41- 0AA3

1PH8351-1. D 4 ...

0.86

235

0.967

14.74 (130)

2235 (4928)

1XB7712-P03

1260

6SL3320-1TE41- 2AA3

1PH8352-1. D 4 ...

0.87

338

0.970

17.40 (154)

2560 (5645)

1XB7712-P03

12604)

6SL3320-1TE41- 2AA3

1PH8354-1. D 4 ...

0.88

314

0.970

20.66 (183)

2889 (6370)

1XB7820-P00

1405

1PH8356-1. D 4 ...

0.88

433

0.973

24.22 (214)

3256 (7179)

1XB7820-P00

2 985

2 6SL3320-1TE41- 0AA3

1PH8358-1. D 4 ...

0.89

489

0.973

27.79 (246)

3629 (8002)

1XB7820-P00

2 9854)

2 6SL3320-1TE41- 0AA3

1)
2)
3)
4)

6SL3320-1TE41- 2AA3
6SL3320-1TE41- 4AA3
2 6SL3320-1TE41- 0AA3

6SL3320-1TE41- 4AA3

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A, B, E or F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2.5 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2.5 kHz.
Siemens PM 21 2011

5/25

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
Operating
frequency speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Forced ventilation

Line voltage 690 V 3 AC, Basic Line Module (noise value 77 dB)
550

750

900

1250

355

355

355

355

315 (422)

5470 (4035)

355

635

28.0

1100

2800

1PH8350-17 H 4 7 - . .. 0

355 (476)

6164 (4547)

400

635

28.0

1100

2800

1PH8351-17 H 4 7 - . .. 0

420 (563)

7293 (5379)

465

635

28.0

1000

2800

1PH8352-17 H 4 7 - . .. 0

500 (671)

8682 (6404)

550

635

28.0

1000

2800

1PH8354-17 H 4 7 - . .. 0

585 (784)

10158 (7493)

630

635

27.9

900

2800

1PH8356-17 H 4 7 - . .. 0

670 (898)

11634 (8581)

720

635

27.9

900

2800

1PH8358-17 H 4 7 - . .. 0

400 (536)

5093 (3757)

435

650

37.9

1400

2800

1PH8350-17 K 4 7 - . .. 0

440 (590)

5603 (4133)

475

650

37.9

1400

2800

1PH8351-17 K 4 7 - . .. 0

535 (717)

6812 (5025)

580

650

37.9

1300

2800

1PH8352-17 K 4 7 - . .. 0

630 (845)

8022 (5917)

660

650

37.9

1300

2800

1PH8354-17 K 4 7 - . .. 0

730 (979)

9295 (6856)

760

650

37.9

1200

2800

1PH8356-17 K 4 7 - . .. 0

825 (1106)

10505 (7748)

880

650

37.8

1200

2800

1PH8358-17 K 4 7 - . .. 0

490 (657)

5199 (3835)

560

620

45.4

1500

2800

1PH8350-17 U 4 7 - . .. 0

550 (738)

5836 (4305)

620

620

45.4

1500

2800

1PH8351-17 U 4 7 - . .. 0

640 (858)

6791 (5009)

710

620

45.4

1400

2800

1PH8352-17 U 4 7 - . .. 0

745 (999)

7905 (5831)

820

620

45.4

1300

2800

1PH8354-17 U 4 7 - . .. 0

855 (1147)

9073 (6692)

930

620

45.4

1200

2800

1PH8356-17 U 4 7 - . .. 0

990 (1328)

10505 (7748)

1080

620

45.4

1200

2800

1PH8358-17 U 4 7 - . .. 0

560 (751)

4278 (3155)

600

640

63.0

1700

2800

1PH8350-17 V 4 7 - . .. 0

630 (845)

4813 (3550)

680

640

63.0

1700

2800

1PH8351-17 V 4 7 - . .. 0

760 (1019)

5806 (4283)

810

640

63.0

1700

2800

1PH8352-17 V 4 7 - . .. 0

880 (1180)

6723 (4959)

920

640

63.0

1400

2800

1PH8354-17 V 4 7 - . .. 0

990 (1328)

7564 (5579)

1040

640

62.9

1400

2800

1PH8356-17 V 4 7 - . .. 0

1140 (1529)

8710 (6424)

1180

640

62.9

1400

2800

1PH8358-17 V 4 7 - . .. 0
For versions, see
Order No. supplement
and options on page 5/58.

5/26

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

Weight,
approx.

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system
Order No.

1PH8350-1. H 4 ...

0.85

140

0.946

14.74 (130)

2235 (4928)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8351-1. H 4 ...

0.85

140

0.946

14.74 (130)

2235 (4928)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8352-1. H 4 ...

0.87

151

0.946

17.40 (154)

2560 (5645)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8354-1. H 4 ...

0.87

178

0.949

20.66 (183)

2889 (6370)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8356-1. H 4 ...

0.88

211

0.952

24.22 (214)

3256 (7179)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8358-1. H 4 ...

0.88

247

0.954

27.79 (246)

3629 (8002)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8350-1. K 4 ...

0.85

164

0.958

14.74 (130)

2235 (4928)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8351-1. K 4 ...

0.85

164

0.958

14.74 (130)

2235 (4928)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8352-1. K 4 ...

0.85

210

0.960

17.40 (154)

2560 (5645)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8354-1. K 4 ...

0.87

218

0.961

20.66 (183)

2889 (6370)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8356-1. K 4 ...

0.88

252

0.963

24.22 (214)

3256 (7179)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8358-1. K 4 ...

0.86

275

0.966

27.79 (246)

3629 (8002)

1XB7712-P03

1025

6SL3320-1TG41- 0AA3

1PH8350-1. U 4 ...

0.85

216

0.962

14.74 (130)

2235 (4928)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8351-1. U 4 ...

0.85

216

0.962

14.74 (130)

2235 (4928)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8352-1. U 4 ...

0.86

231

0.963

17.40 (154)

2560 (5645)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8354-1. U 4 ...

0.87

268

0.965

20.66 (183)

2889 (6370)

1XB7712-P03

1025

6SL3320-1TG41- 0AA3

1PH8356-1. U 4 ...

0.88

283

0.966

24.22 (214)

3256 (7179)

1XB7712-P03

1270

1PH8358-1. U 4 ...

0.88

338

0.967

27.79 (246)

3629 (8002)

1XB7712-P03

2 735

1PH8350-1. V 4 ...

0.86

179

0.966

14.74 (130)

2235 (4928)

1XB7712-P03

7354)

6SL3320-1TG37- 4AA3

1PH8351-1. V 4 ...

0.86

179

0.966

14.74 (130)

2235 (4928)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8352-1. V 4 ...

0.87

208

0.968

17.40 (154)

2560 (5645)

1XB7712-P03

9104)

6SL3320-1TG38- 8AA3

1PH8354-1. V 4 ...

0.88

220

0.969

20.66 (183)

2889 (6370)

1XB7712-P03

1270

1PH8356-1. V 4 ...

0.88

319

0.972

24.22 (214)

3256 (7179)

1XB7712-P03

12704)

1PH8358-1. V 4 ...

0.89

322

0.972

27.79 (246)

3629 (8002)

1XB7820-P00

2 810

1)
2)
3)
4)

6SL3320-1TG41- 3AA3
2 6SL3320-1TG37- 4AA3

6SL3320-1TG41- 3AA3
6SL3320-1TG41- 3AA3
2 6SL3320-1TG38- 1AA3

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A, B, E or F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2.5 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2.5 kHz.
Siemens PM 21 2011

5/27

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
Operating
frequency speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Forced ventilation

Line voltage 690 V 3 AC, Active Line Module (noise value 77 dB)
600

800

1000

1350

355

355

355

355

345 (463)

5491 (4050)

355

690

30.5

1100

2800

1PH8350-17 H 4 7 - . .. 0

385 (516)

6128 (4520)

395

690

30.5

1100

2800

1PH8351-17 H 4 7 - . .. 0

460 (617)

7322 (5401)

465

690

30.5

1000

2800

1PH8352-17 H 4 7 - . .. 0

545 (731)

8675 (6399)

550

690

30.5

1000

2800

1PH8354-17 H 4 7 - . .. 0

640 (858)

10187 (7514)

640

690

30.4

900

2800

1PH8356-17 H 4 7 - . .. 0

730 (979)

11619 (8570)

720

690

30.4

900

2800

1PH8358-17 H 4 7 - . .. 0

425 (570)

5073 (3742)

435

690

40.4

1400

2800

1PH8350-17 K 4 7 - . .. 0

470 (630)

5611 (4139)

480

690

40.4

1400

2800

1PH8351-17 K 4 7 - . .. 0

570 (764)

6804 (5019)

580

690

40.4

1300

2800

1PH8352-17 K 4 7 - . .. 0

670 (898)

7998 (5899)

660

690

40.4

1300

2800

1PH8354-17 K 4 7 - . .. 0

780 (1046)

9311 (6868)

770

690

40.4

1200

2800

1PH8356-17 K 4 7 - . .. 0

880 (1180)

10505 (7748)

880

690

40.3

1200

2800

1PH8358-17 K 4 7 - . .. 0

545 (731)

5205 (3839)

560

690

50.4

1500

2800

1PH8350-17 U 4 7 - . .. 0

610 (818)

5826 (4297)

620

690

50.4

1500

2800

1PH8351-17 U 4 7 - . .. 0

710 (952)

6781 (5002)

710

690

50.4

1400

2800

1PH8352-17 U 4 7 - . .. 0

830 (1113)

7927 (5847)

820

690

50.4

1300

2800

1PH8354-17 U 4 7 - . .. 0

950 (1274)

9073 (6692)

930

690

50.4

1200

2800

1PH8356-17 U 4 7 - . .. 0

1100 (1475)

10505 (7748)

1080

690

50.4

1200

2800

1PH8358-17 U 4 7 - . .. 0

605 (811)

4280 (3157)

600

690

68.0

1700

2800

1PH8350-17 V 4 7 - . .. 0

680 (912)

4810 (3548)

680

690

68.0

1700

2800

1PH8351-17 V 4 7 - . .. 0

820 (1100)

5801 (4279)

810

690

68.0

1700

2800

1PH8352-17 V 4 7 - . .. 0

950 (1274)

6720 (4957)

920

690

68.0

1400

2800

1PH8354-17 V 4 7 - . .. 0

1070 (1435)

7569 (5583)

1040

690

67.9

1400

2800

1PH8356-17 V 4 7 - . .. 0

1230 (1649)

8701 (6418)

1180

690

67.9

1400

2800

1PH8358-17 V 4 7 - . .. 0
For versions, see
Order No. supplement
and options on page 5/58.

5/28

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment
of inertia

cos

Weight,
approx.

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system
Order No.

1PH8350-1. H 4 ...

0.85

139

0.949

14.74 (130)

2235 (4928)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8351-1. H 4 ...

0.85

139

0.949

14.74 (130)

2235 (4928)

1XB7712-P01

465

6SL3320-1TG34- 7AA3

1PH8352-1. H 4 ...

0.87

149

0.949

17.40 (154)

2560 (5645)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8354-1. H 4 ...

0.87

176

0.952

20.66 (183)

2889 (6370)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8356-1. H 4 ...

0.88

209

0.955

24.22 (214)

3256 (7179)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8358-1. H 4 ...

0.88

245

0.957

27.79 (246)

3629 (8002)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8350-1. K 4 ...

0.85

162

0.959

14.74 (130)

2235 (4928)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8351-1. K 4 ...

0.85

162

0.959

14.74 (130)

2235 (4928)

1XB7712-P03

575

6SL3320-1TG35- 8AA3

1PH8352-1. K 4 ...

0.86

207

0.961

17.40 (154)

2560 (5645)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8354-1. K 4 ...

0.87

215

0.962

20.66 (183)

2889 (6370)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8356-1. K 4 ...

0.88

249

0.964

24.22 (214)

3256 (7179)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8358-1. K 4 ...

0.86

272

0.967

27.79 (246)

3629 (8002)

1XB7712-P03

1025

6SL3320-1TG41- 0AA3

1PH8350-1. U 4 ...

0.85

216

0.964

14.74 (130)

2235 (4928)

1XB7712-P03

735

6SL3320-1TG37- 4AA3

1PH8351-1. U 4 ...

0.85

216

0.964

14.74 (130)

2235 (4928)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8352-1. U 4 ...

0.86

232

0.965

17.40 (154)

2560 (5645)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8354-1. U 4 ...

0.87

269

0.967

20.66 (183)

2889 (6370)

1XB7712-P03

1025

6SL3320-1TG41- 0AA3

1PH8356-1. U 4 ...

0.88

283

0.968

24.22 (214)

3256 (7179)

1XB7712-P03

1270

1PH8358-1. U 4 ...

0.88

339

0.969

27.79 (246)

3629 (8002)

1XB7712-P03

2 735

1PH8350-1. V 4 ...

0.86

178

0.967

14.74 (130)

2235 (4928)

1XB7712-P03

7354)

6SL3320-1TG37- 4AA3

1PH8351-1. V 4 ...

0.86

178

0.967

14.74 (130)

2235 (4928)

1XB7712-P03

810

6SL3320-1TG38- 1AA3

1PH8352-1. V 4 ...

0.87

208

0.969

17.40 (154)

2560 (5645)

1XB7712-P03

9104)

6SL3320-1TG38- 8AA3

1PH8354-1. V 4 ...

0.88

219

0.969

20.66 (183)

2889 (6370)

1XB7712-P03

1270

1PH8356-1. V 4 ...

0.88

317

0.973

24.22 (214)

3256 (7179)

1XB7712-P03

12704)

1PH8358-1. V 4 ...

0.89

322

0.973

27.79 (246)

3629 (8002)

1XB7820-P00

2 810

1)
2)
3)
4)

6SL3320-1TG41- 3AA3
2 6SL3320-1TG37- 4AA3

6SL3320-1TG41- 3AA3
6SL3320-1TG41- 3AA3
2 6SL3320-1TG38- 1AA3

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A, B, E or F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2.5 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2.5 kHz.
Siemens PM 21 2011

5/29

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP65 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm lbf-ft

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Water cooling

Line voltage 400 V 3 AC, Smart/Basic Line Module

1500

80
100

8.9

357

54.5

3550

10000

1PH8083-17 F 2 7 - .. . 1

29 (21.4)

13.7

316

53.3

6000

10000

1PH8087-17 F 2 7 - .. . 1

5 (6.71)

32 (23.6)

12.8

357

53.1

2500

9000

1PH8101-17 F 2 7 - .. . 1

7.1 (9.52)

45 (33.2)

19.7

317

53.0

4000

9000

1PH8103-17 F 2 7 - .. . 1

70 (51.6)

28.5

340

52.8

3500

9000

1PH8105-17 F 2 7 - .. . 1

14 (18.8)

89 (65.6)

43.7

277

53.3

5600

9000

1PH8107-17 F 2 7 - .. . 1

15 (20.1)

96 (70.8)

30

380

52.3

2500

8000

1PH8131-17 F 2 7 - .. . 1

17 (22.8)

108 (79.7)

38

345

51.5

3500

8000

1PH8133-17 F 2 7 - .. . 1

22 (29.5)

140 (103)

51

342

51.5

4000

8000

1PH8135-17 F 2 7 - .. . 1

27 (36.2)

172 (127)

67

315

51.6

4000

8000

1PH8137-17 F 2 7 - .. . 1

30 (40.2)

191 (141)

80

289

51.9

5000

8000

1PH8138-17 F 2 7 - .. . 1

37 (49.62)

236 (174)

84

328

51.1

3000

6500

1PH8163-17 F 2 7 - .. . 1

46 (61.7)

293 (216)

104

330

50.9

3050

6500

1PH8165-17 F 2 7 - .. . 1

52 (69.7)

331 (224)

116

332

51.2

3050

6500

1PH8166-17 F 2 7 - .. . 1

80

4.3 (5.8)

21 (15.5)

12

322

70.4

7200

10000

1PH8083-17 G2 7 - .. . 1

6.1 (8.2)

29 (21.4)

17.5

312

70.3

7950

10000

1PH8087-17 G2 7 - .. . 1

100

6.4 (8.6)

31 (22.9)

16.8

335

69.8

4000

9000

1PH8101-17 G2 7 - .. . 1

9.5 (12.7)

45 (33.2)

23.8

343

69.8

3000

9000

1PH8103-17 G2 7 - .. . 1

13.0 (17.4)

62 (45.7)

34.5

326

69.3

4000

9000

1PH8105-17 G2 7 - .. . 1

18 (24.1)

86 (63.4)

40

352

69.1

4000

8000

1PH8131-17 G2 7 - .. . 1

22 (29.5)

105 (77.4)

52

336

68.2

5000

8000

1PH8133-17 G2 7 - .. . 1

160

132

160

3000

22 (16.2)

4.6 (6.17)

11 (14.8)
132

2000

3.5 (4.69)

100

29 (38.9)

138 (102)

64

348

68.3

4500

8000

1PH8135-17 G2 7 - .. . 1

42 (56.3)

201 (148)

93

335

67.6

5000

6500

1PH8163-17 G2 7 - .. . 1

53 (71.1)

253 (187)

110

352

67.6

3500

6500

1PH8165-17 G2 7 - .. . 1

64 (85.8)

306 (221)

125

376

67.8

3000

6500

1PH8166-17 G2 7 - .. . 1

10.6 (14.2)

34 (25.1)

30

309

102.4

11900

9000

1PH8103-17 M2 7 - .. . 1

16.8 (22.5)

53 (39.1)

45

324

102.3

8050

9000

1PH8105-17 M2 7 - .. . 1

18 (24.1)

57 (42.0)

60

264

102.2

17000

9000

1PH8107-17 M2 7 - .. . 1
For versions, see
Order No. supplement
and options on page 5/54.

5/30

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP65 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

J
kgm2

(lbf-in-s2)

Weight,
approx.

kg (lb)

Terminal
box

Type

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8083-1. F 2...

0.84

3.6

0.784

0.0064 (0.057)

36 (79.4)

gk803

6SL312 7 - 1TE21 - 0AA3

1PH8087-1. F 2...

0.78

7.2

0.814

0.0089 (0.079)

44 (97.0)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8101-1. F 2...

0.81

6.0

0.813

0.0138 (0.122)

51 (112)

gk823

18

6SL312 7 - 1TE21 - 8AA3

1PH8103-1. F 2...

0.82

8.6

0.827

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 - 1TE23 - 0AA3

1PH8105-1. F 2...

0.81

13.3

0.843

0.0252 (0.223)

74 (163)

gk823

30

6SL312 7 - 1TE23 - 0AA3

1PH8107-1. F 2...

0.83

17.8

0.829

0.0289 (0.256)

83 (183)

gk823

45

6SL312 7 - 1TE24 - 5AA3

1PH8131-1. F 2...

0.89

9.2

0.883

0.0590 (0.522)

105 (232)

gk843

30

6SL312 7 - 1TE23 - 0AA3

1PH8133-1. F 2...

0.86

14.2

0.897

0.0760 (0.673)

123 (271)

gk843

45

6SL312 7 - 1TE24 - 5AA3

1PH8135-1. F 2...

0.85

20.3

0.901

0.0940 (0.832)

141 (311)

gk843

60

6SL312 7 - 1TE26 - 0AA3

1PH8137-1. F 2...

0.86

25.3

0.900

0.1090 (0.965)

157 (346)

gk843

85

6SL312 7 - 1TE28 - 5AA3

1PH8138-1. F 2...

0.88

27.1

0.882

0.1090 (0.965)

157 (346)

gk843

85

6SL312 7 - 1TE28 - 5AA3

1PH8163-1. F 2...

0.88

27.4

0.916

0.2160 (1.912)

229 (505)

gk873

85

6SL312 7 - 1TE28 - 5AA3

1PH8165-1. F 2...

0.87

37.2

0.930

0.2320 (2.053)

264 (582)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8166-1. F 2...

0.88

36.7

0.936

0.2320 (2.053)

269 (593)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8083-1. G 2...

0.80

5.9

0.833

0.0064 (0.057)

36 (79.4)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8087-1. G 2...

0.80

8.4

0.843

0.0089 (0.079)

44 (97.0)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8101-1. G 2...

0.81

7.6

0.857

0.0138 (0.122)

51 (112)

gk823

18

6SL312 7 - 1TE21 - 8AA3

1PH8103-1. G 2...

0.82

10.3

0.857

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 - 1TE23 - 0AA3

1PH8105-1. G 2...

0.81

15.6

0.879

0.0252 (0.223)

74 (163)

gk823

45

6SL312 7 - 1TE24 - 5AA3

1PH8131-1. G 2...

0.85

15.5

0.908

0.0590 (0.522)

105 (232)

gk843

45

6SL312 7 - 1TE24 - 5AA3

1PH8133-1. G 2...

0.84

22.2

0.909

0.0760 (0.673)

123 (271)

gk843

60

6SL312 7 - 1TE26 - 0AA3

1PH8135-1. G 2...

0.86

23.9

0.924

0.0940 (0.832)

141 (311)

gk843

85

6SL312 7 - 1TE28 - 5AA3

1PH8163-1. G 2...

0.88

30.8

0.937

0.2160 (1.912)

229 (505)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8165-1. G 2...

0.89

32.1

0.938

0.2320 (2.053)

264 (582)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8166-1. G 2...

0.88

39.3

0.937

0.2320 (2.053)

269 (593)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8103-1. M 2...

0.80

13.0

0.900

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 - 1TE23 - 0AA3

1PH8105-1. M 2...

0.80

20.3

0.900

0.0252 (0.223)

74 (163)

gk823

45

6SL312 7 - 1TE24 - 5AA3

1PH8107-1. M 2...

0.80

26.0

0.900

0.0289 (0.256)

83 (183)

gk823

60

6SL312 7 - 1TE26 - 0AA3

Cooling:
Internal air cooling
External air cooling

1)
2)
3)

0
1

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position B to D).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz.
For lower power ratings, Motor Modules in blocksize format can be configured as an alternative
(levels of output current: 7.7 A/10.2 A/18 A).
Siemens PM 21 2011

5/31

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP65 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Water cooling

Line voltage 400 V 3 AC, Active Line Module

1750

80
100

132

160

2300

22 (16.2)

8.7

416

62.4

4100

10000

1PH8083-17 F 2 7 - . .. 1

5.4 (7.24)

29 (21.4)

13.7

358

61.8

6600

10000

1PH8087-17 F 2 7 - . .. 1

5.8 (7.78)

32 (23.6)

12.8

400

61.7

2500

9000

1PH8101-17 F 2 7 - . .. 1

8.2 (11.0

45 (33.2)

19.7

364

61.4

5000

9000

1PH8103-17 F 2 7 - . .. 1

12.5 (16.8)

68 (50.2)

28.5

380

61.2

3400

9000

1PH8105-17 F 2 7 - . .. 1

15.5 (20.8)

85 (62.7)

42

314

61.4

4500

9000

1PH8107-17 F 2 7 - . .. 1

17 (22.8)

93 (68.6)

30

425

60.7

2500

8000

1PH8131-17 F 2 7 - . .. 1

19.5 (26.1)

106 (78.2)

38

403

59.8

3500

8000

1PH8133-17 F 2 7 - . .. 1

25.5 (34.2)

139 (103)

51

395

59.8

4000

8000

1PH8135-17 F 2 7 - . .. 1

31.5 (42.2)

172 (127)

67

365

59.9

4500

8000

1PH8137-17 F 2 7 - . .. 1

33 (44.3)

180 (133)

77

332

60.0

5000

8000

1PH8138-17 F 2 7 - . .. 1

43 (57.7)

235 (173)

84

380

59.4

3500

6500

1PH8163-17 F 2 7 - . .. 1

53 (71.1)

289 (213)

104

374

59.3

3050

6500

1PH8165-17 F 2 7 - . .. 1

61 (81.8)

333 (246)

116

381

59.5

3050

6500

1PH8166-17 F 2 7 - . .. 1

20 (14.8)

12

362

80.5

8150

10000

1PH8083-17 G2 7 - . .. 1

80

4.9 (6.57)
7.0 (9.39)

29 (21.4)

17.7

355

80.3

8850

10000

1PH8087-17 G2 7 - . .. 1

100

7.3 (9.79)

30 (22.1)

16.8

382

79.7

5000

9000

1PH8101-17 G2 7 - . .. 1

10.9 (14.6)

45 (33.2)

23.8

390

79.8

3000

9000

1PH8103-17 G2 7 - . .. 1

15 (20.1)

62 (45.7)

34

370

79.3

3500

9000

1PH8105-17 G2 7 - . .. 1

20 (26.8)

83 (61.2)

39

400

78.5

4000

8000

1PH8131-17 G2 7 - . .. 1

25 (33.5)

104 (76.7)

52

373

78.3

6000

8000

1PH8133-17 G2 7 - . .. 1

132

160

3300

4.0 (5.36)

100

31 (41.6)

129 (95.2)

61

397

78.1

4500

8000

1PH8135-17 G2 7 - . .. 1

48 (64.4)

199 (147)

93

382

77.6

4000

6500

1PH8163-17 G2 7 - . .. 1

60 (80.5)

249 (184)

107

410

77.6

3000

6500

1PH8165-17 G2 7 - . .. 1

72 (96.6)

299 (221)

124

420

77.8

3000

6500

1PH8166-17 G2 7 - . .. 1

11.7 (15.7)

34 (25.1)

30

340

112.4

13550

9000

1PH8103-17 M2 7 - . .. 1

18.5 (24.81)

54 (39.8)

45

355

112.4

9050

9000

1PH8105-17 M2 7 - . .. 1

20 (26.82)

58 (42.8)

60

290

112.6

18050

9000

1PH8107-17 M2 7 - . .. 1
For versions, see
Order No. supplement
and options on page 5/54.

5/32

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP65 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment
of inertia

cos

J
kgm2

(lbf-in-s2)

Weight,
approx.

kg (lb)

Terminal
box

Type

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8083-1. F 2...

0.82

4.0

0.808

0.0064 (0.057)

36 (79.4)

gk803

6SL312 7 -1TE21 - 0AA3

1PH8087-1. F 2...

0.80

6.8

0.831

0.0089 (0.079)

44 (97.0)

gk803

18

6SL312 7 -1TE21 - 8AA3

1PH8101-1. F 2...

0.83

5.4

0.834

0.0138 (0.122)

51 (112)

gk823

18

6SL312 7 -1TE21 - 8AA3

1PH8103-1. F 2...

0.82

8.6

0.851

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 -1TE23 - 0AA3

1PH8105-1. F 2...

0.81

12.1

0.862

0.0252 (0.223)

74 (163)

gk823

30

6SL312 7 -1TE23 - 0AA3

1PH8107-1. F 2...

0.83

17.5

0.847

0.0289 (0.256)

83 (183)

gk823

45

6SL312 7 -1TE24 - 5AA3

1PH8131-1. F 2...

0.89

8.2

0.897

0.0590 (0.522)

105 (232)

gk843

30

6SL312 7 -1TE23 - 0AA3

1PH8133-1. F 2...

0.85

14.9

0.913

0.0760 (0.673)

123 (271)

gk843

45

6SL312 7 -1TE24 - 5AA3

1PH8135-1. F 2...

0.85

20.1

0.914

0.0940 (0.832)

141 (311)

gk843

60

6SL312 7 -1TE26 - 0AA3

1PH8137-1. F 2...

0.86

24.8

0.911

0.1090 (0.965)

157 (346)

gk843

85

6SL312 7 -1TE28 - 5AA3

1PH8138-1. F 2...

0.87

27.1

0.898

0.1090 (0.965)

157 (346)

gk843

85

6SL312 7 -1TE28 - 5AA3

1PH8163-1. F 2...

0.88

27.3

0.924

0.2160 (1.912)

229 (505)

gk873

85

6SL312 7 -1TE28 - 5AA3

1PH8165-1. F 2...

0.88

33.8

0.935

0.2320 (2.053)

264 (582)

gk873

132

6SL312 7 -1TE31 - 3AA3

1PH8166-1. F 2...

0.89

35.2

0.940

0.2320 (2.053)

269 (593)

gk873

132

6SL312 7 -1TE31 - 3AA3

1PH8083-1. G 2...

0.80

5.8

0.846

0.0064 (0.057)

36 (79.4)

gk803

18

6SL312 7 -1TE21 - 8AA3

1PH8087-1. G 2...

0.79

8.6

0.860

0.0089 (0.079)

44 (97.0)

gk803

18

6SL312 7 -1TE21 - 8AA3

1PH8101-1. G 2...

0.80

7.8

0.874

0.0138 (0.122)

51 (112)

gk823

18

6SL312 7 -1TE21 - 8AA3

1PH8103-1. G 2...

0.82

10.3

0.883

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 -1TE23 - 0AA3

1PH8105-1. G 2...

0.81

15.1

0.891

0.0252 (0.223)

74 (163)

gk823

45

6SL312 7 -1TE24 - 5AA3

1PH8131-1. G 2...

0.85

15.4

0.920

0.0590 (0.522)

105 (232)

gk843

45

6SL312 7 -1TE24 - 5AA3

1PH8133-1. G 2...

0.86

19.4

0.923

0.0760 (0.673)

123 (271)

gk843

60

6SL312 7 -1TE26 - 0AA3

1PH8135-1. G 2...

0.85

24.1

0.933

0.0940 (0.832)

141 (311)

gk843

85

6SL312 7 -1TE28 - 5AA3

1PH8163-1. G 2...

0.88

30.2

0.939

0.2160 (1.912)

229 (505)

gk873

132

6SL312 7 -1TE31 - 3AA3

1PH8165-1. G 2...

0.88

33.7

0.946

0.2320 (2.053)

264 (582)

gk873

132

6SL312 7 -1TE31 - 3AA3

1PH8166-1. G 2...

0.89

35.5

0.946

0.2320 (2.053)

269 (593)

gk873

132

6SL312 7 -1TE31 - 3AA3

1PH8103-1. M 2...

0.80

13.2

0.900

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 -1TE23 - 0AA3

1PH8105-1. M 2...

0.80

20.2

0.910

0.0252 (0.223)

74 (163)

gk823

45

6SL312 7 -1TE24 - 5AA3

1PH8107-1. M 2...

0.80

26.1

0.900

0.0289 (0.256)

83 (183)

gk823

60

6SL312 7 -1TE26 - 0AA3

Cooling:
Internal air cooling
External air cooling

1)
2)
3)

0
1

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position B to D).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz.
For lower power ratings, Motor Modules in blocksize format can be configured as an alternative
(levels of output current: 7.7 A/10.2 A/18 A).
Siemens PM 21 2011

5/33

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP65 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Water cooling

Line voltage 480 V 3 AC, Smart/Basic/Active Line Module

2000

80
100

132

160

2650

22 (16.2)

8.7

457

71.0

4250

10000

1PH8083-17 F 2 7 - .. . 1

29 (21.4)

13.7

402

70.0

6950

10000

1PH8087-17 F 2 7 - .. . 1

6.6 (8.85)

32 (23.6)

12.5

450

69.9

2500

9000

1PH8101-17 F 2 7 - .. . 1

9.4 (12.6)

45 (33.2)

19.7

411

69.7

5000

9000

1PH8103-17 F 2 7 - .. . 1

14 (18.8)

67 (49.4)

27.5

426

69.5

3000

9000

1PH8105-17 F 2 7 - .. . 1

18 (24.1)

86 (63.4)

42.6

363

69.7

3000

9000

1PH8107-17 F 2 7 - .. . 1

18.5 (24.8)

88 (64.9)

30

460

68.7

2500

8000

1PH8131-17 F 2 7 - .. . 1

22.5 (30.2)

107 (78.9)

38

452

68.2

4000

8000

1PH8133-17 F 2 7 - .. . 1

29 (38.9)

138 (102)

52

448

68.2

4500

8000

1PH8135-17 F 2 7 - .. . 1

36 (48.3)

172 (127)

67

415

68.3

4000

8000

1PH8137-17 F 2 7 - .. . 1

37 (49.62)

177 (131)

76

380

68.4

6000

8000

1PH8138-17 F 2 7 - .. . 1

49 (65.7)

234 (173)

84

430

67.7

3500

6500

1PH8163-17 F 2 7 - .. . 1

60 (80.5)

287 (212)

103

426

67.6

3050

6500

1PH8165-17 F 2 7 - .. . 1

68 (91.2)

325 (240)

116

426

67.9

3050

6500

1PH8166-17 F 2 7 - .. . 1

20 (14.8)

12

425

91.8

8500

10000

1PH8083-17 G2 7 - .. . 1

80

5.6 (7.51)
8.1 (10.9)

29 (21.4)

17.8

415

91.8

9150

10000

1PH8087-17 G2 7 - .. . 1

100

8.4 (11.3)

30 (22.1)

16.8

435

91.4

4000

9000

1PH8101-17 G2 7 - .. . 1

12.5 (16.8)

45 (33.2)

23.5

454

91.2

4000

9000

1PH8103-17 G2 7 - .. . 1

17 (22.8)

61 (45.0)

33.5

424

90.9

4500

9000

1PH8105-17 G2 7 - .. . 1

23 (30.8)

83 (61.2)

39

458

90.1

4500

8000

1PH8131-17 G2 7 - .. . 1

28 (37.5)

101 (74.5)

50

427

89.9

6000

8000

1PH8133-17 G2 7 - .. . 1

132

160

3600

4.6 (6.17)
6.1 (8.18)

100

32 (42.9)

115 (84.8)

58

448

89.6

5500

8000

1PH8135-17 G2 7 - .. . 1

55 (73.8)

198 (146)

90

450

89.2

5000

6500

1PH8163-17 G2 7 - .. . 1

65 (87.2)

234 (173)

100

460

89.2

4000

6500

1PH8165-17 G2 7 - .. . 1

83 (111)

299 (221)

125

460

89.6

3000

6500

1PH8166-17 G2 7 - .. . 1

12.7 (17.0)

34 (25.1)

29.7

368

122.5

17650

9000

1PH8103-17 M2 7 - .. . 1

20 (26.8)

53 (39.1)

45

375

122.5

10000

9000

1PH8105-17 M2 7 - .. . 1

21 (28.2)

56 (41.3)

59

315

122.1

17650

9000

1PH8107-17 M2 7 - .. . 1
For versions, see
Order No. supplement
and options on page 5/54.

5/34

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP65 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of inertia

cos

J
kgm2

(lbf-in-s2)

Weight,
approx.

kg (lb)

Terminal
box

Type

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8083-1. F 2...

0.83

3.8

0.839

0.0064 (0.057)

36 (79.4)

gk803

6SL312 7 - 1TE21 - 0AA3

1PH8087-1. F 2...

0.79

6.8

0.868

0.0089 (0.079)

44 (97.0)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8101-1. F 2...

0.82

4.4

0.858

0.0138 (0.122)

51 (112)

gk823

18

6SL312 7 - 1TE21 - 8AA3

1PH8103-1. F 2...

0.82

8.5

0.869

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 - 1TE23 - 0AA3

1PH8105-1. F 2...

0.82

11.7

0.894

0.0252 (0.223)

74 (163)

gk823

30

6SL312 7 - 1TE23 - 0AA3

1PH8107-1. F 2...

0.81

19.1

0.873

0.0289 (0.256)

83 (183)

gk823

45

6SL312 7 - 1TE24 - 5AA3

1PH8131-1. F 2...

0.90

7.2

0.912

0.0590 (0.522)

105 (232)

gk843

30

6SL312 7 - 1TE23 - 0AA3

1PH8133-1. F 2...

0.86

14.4

0.938

0.0760 (0.673)

123 (271)

gk843

45

6SL312 7 - 1TE24 - 5AA3

1PH8135-1. F 2...

0.85

19.9

0.931

0.0940 (0.832)

141 (311)

gk843

60

6SL312 7 - 1TE26 - 0AA3

1PH8137-1. F 2...

0.86

25.4

0.928

0.1090 (0.965)

157 (346)

gk843

85

6SL312 7 - 1TE28 - 5AA3

1PH8138-1. F 2...

0.86

28.4

0.920

0.1090 (0.965)

157 (346)

gk843

85

6SL312 7 - 1TE28 - 5AA3

1PH8163-1. F 2...

0.88

26.9

0.925

0.2160 (1.912)

229 (505)

gk873

85

6SL312 7 - 1TE28 - 5AA3

1PH8165-1. F 2...

0.88

34.0

0.940

0.2320 (2.053)

264 (582)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8166-1. F 2...

0.89

32.8

0.941

0.2320 (2.053)

269 (593)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8083-1. G 2...

0.76

6.5

0.862

0.0064 (0.057)

36 (79.4)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8087-1. G 2...

0.77

9.3

0.871

0.0089 (0.079)

44 (97.0)

gk803

18

6SL312 7 - 1TE21 - 8AA3

1PH8101-1. G 2...

0.80

7.7

0.888

0.0138 (0.122)

51 (112)

gk823

18

6SL312 7 - 1TE21 - 8AA3

1PH8103-1. G 2...

0.79

11.3

0.904

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 - 1TE23 - 0AA3

1PH8105-1. G 2...

0.81

15.3

0.911

0.0252 (0.223)

74 (163)

gk823

45

6SL312 7 - 1TE24 - 5AA3

1PH8131-1. G 2...

0.85

15.4

0.938

0.0590 (0.522)

105 (232)

gk843

45

6SL312 7 - 1TE24 - 5AA3

1PH8133-1. G 2...

0.85

19.5

0.933

0.0760 (0.673)

123 (271)

gk843

60

6SL312 7 - 1TE26 - 0AA3

1PH8135-1. G 2...

0.84

23.0

0.942

0.0940 (0.832)

141 (311)

gk843

85

6SL312 7 - 1TE28 - 5AA3

1PH8163-1. G 2...

0.86

33.6

0.940

0.2160 (1.912)

229 (505)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8165-1. G 2...

0.89

31.9

0.948

0.2320 (2.053)

264 (582)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8166-1. G 2...

0.90

35.7

0.948

0.2320 (2.053)

269 (593)

gk873

132

6SL312 7 - 1TE31 - 3AA3

1PH8103-1. M 2...

0.80

13.0

0.910

0.0172 (0.152)

60 (132)

gk823

30

6SL312 7 - 1TE23 - 0AA3

1PH8105-1. M 2...

0.81

18.6

0.920

0.0252 (0.223)

74 (163)

gk823

45

6SL312 7 - 1TE24 - 5AA3

1PH8107-1. M 2...

0.79

26.1

0.910

0.0289 (0.256)

83 (183)

gk823

60

6SL312 7 - 1TE26 - 0AA3

Cooling:
Internal air cooling
External air cooling

1)
2)
3)

0
1

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position B to D).
The rated pulse frequencies must be taken into account; the rated motor data is valid for 4 kHz.
For lower power ratings, Motor Modules in blocksize format can be configured as an alternative
(levels of output current: 7.7 A/10.2 A/18 A).
Siemens PM 21 2011

5/35

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
Operating
frequency speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Water cooling

Line voltage 400 V 3 AC, Smart/Basic Line Module

400

180
225

280

5
700

271

14.0

1500

5000

1PH8184-17 B 2 7 - .. . 1

68

268

13.9

1800

5000

1PH8186-17 B 2 7 - .. . 1

36 (48.3)

859 (634)

100

268

14.0

1400

4500

1PH8224-17 B 2 7 - .. . 1

47 (63.0)

1122 (828)

130

264

14.0

1600

4500

1PH8226-17 B 2 7 - .. . 1

58 (77.8)

1385 (1022)

154

272

13.9

1700

4500

1PH8228-17 B 2 7 - .. . 1

71 (95.2)

1695 (1250)

170

295

13.8

2200

3300

1PH8284-17 B 2 7 - .. . 1

89 (119)

2125 (1567)

210

300

13.7

2200

3300

1PH8286-17 B 2 7 - .. . 1

109 (146)

2602 (1919)

260

295

13.7

2200

3300

1PH8288-17 B 2 7 - .. . 1

77

320

24.2

2500

5000

1PH8184-17 C 2 7 - .. . 1

450 (332)

43 (57.7)

587 (433)

97

330

23.9

3000

5000

1PH8186-17 C 2 7 - .. . 1

225

61 (81.8)

832 (614)

128

340

24.0

2100

4500

1PH8224-17 C 2 7 - .. . 1

81 (109)

1105 (815)

184

310

23.9

2300

4500

1PH8226-17 C 2 7 - .. . 1

96 (129)

1310 (966)

210

315

23.9

2500

4500

1PH8228-17 C 2 7 - .. . 1

123 (165)

1678 (1238)

260

330

23.7

2200

3300

1PH8284-17 C 2 7 - .. . 1

153 (205)

2087 (1539)

320

325

23.7

2200

3300

1PH8286-17 C 2 7 - .. . 1

188 (252)
180

280

180
225

2565 (1892)

400

324

23.6

2200

3300

1PH8288-17 C 2 7 - .. . 1

47 (63.0)

449 (331)

114

300

34.2

5000

5000

1PH8184-17 D 2 7 - .. . 1

64 (85.8)

611 (451)

148

320

34.0

5000

5000

1PH8186-17 D 2 7 - .. . 1

89 (119)

850 (627)

188

335

33.9

2800

4500

1PH8224-17 D 2 7 - .. . 1

115 (154)

1098 (810)

235

340

33.9

2400

4500

1PH8226-17 D 2 7 - .. . 1

141 (189)

1346 (993)

280

340

33.9

2300

4500

1PH8228-17 D 2 7 - .. . 1

172 (231)

1643 (1212)

350

335

33.7

2200

3300

1PH8284-17 D 2 7 - .. . 1

214 (287)

2044 (1508)

460

330

33.6

2200

3300

1PH8286-17 D 2 7 - .. . 1

264 (354)

2521 (1859)

550

335

33.6

2200

3300

1PH8288-17 D 2 7 - .. . 1

70 (93.9)

446 (329)

150

335

51.0

5000

5000

1PH8184-17 F 2 7 - .. . 1

93 (125)

592 (437)

198

330

51.0

5000

5000

1PH8186-17 F 2 7 - .. . 1

119 (160)

758 (559)

240

340

50.6

3500

4500

1PH8224-17 F 2 7 - .. . 1

145 (194)

923 (681)

295

340

50.5

3700

4500

1PH8226-17 F 2 7 - .. . 1

192 (257)

1222 (901)

390

340

50.5

3700

4500

1PH8228-17 F 2 7 - .. . 1

227 (304)

1445 (1066)

445

343

50.4

2200

3300

1PH8284-17 F 2 7 - .. . 1

281 (377)

1789 (1320)

540

343

50.4

2200

3300

1PH8286-17 F 2 7 - .. . 1

345 (463)

2197 (1621)

660

345

50.3

2200

3300

1PH8288-17 F 2 7 - .. . 1

180

95 (127)

363 (268)

196

340

85.2

5000

5000

1PH8184-17 L 2 7 - .. . 1

120 (161)

458 (338)

250

335

83.9

5000

5000

1PH8186-17 L 2 7 - .. . 1

225

153 (205)

584 (431)

310

340

83.8

3200

4500

1PH8224-17 L 2 7 - .. . 1

185 (248)

707 (521)

380

335

83.8

3200

4500

1PH8226-17 L 2 7 - .. . 1

226 (303)

863 (637)

455

340

83.7

3200

4500

280

2500

50

549 (405)

33 (44.3)

225

1500

406 (299)

23 (30.8)

180

280

1000

17 (22.8)

1PH8228-17 L 2 7 - .. . 1
For versions, see
Order No. supplement
and options on page 5/56.

5/36

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment
of inertia

cos

J
kgm2

(lbf-in-s2)

Weight,
approx.

kg (lb)

Terminal
box

Type

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8184-1. B 2...

0.87

28

0.831

0.489 (4.3)

340 (750)

1XB7322-P05

60

6SL3120-1TE26- 0AA3

1PH8186-1. B 2...

0.86

42

0.845

0.652 (5.8)

410 (904)

1XB7322-P05

85

6SL3120-1TE28- 5AA3

1PH8224-1. B 2 ...

0.91

37

0.858

1.45 (12.8)

610 (1345)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8226-1. B 2 ...

0.90

49

0.875

1.90 (16.8)

740 (1632)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8228-1. B 2 ...

0.90

62

0.886

2.35 (20.8)

870 (1918)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8284-1. B 2 ...

0.89

70

0.914

4.21 (37.3)

1280 (2822)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8286-1. B 2 ...

0.89

83

0.916

5.16 (45.7)

1490 (3285)

1XB7322-P05

210

6SL3320-1TE32- 1AA3

1PH8288-1. B 2 ...

0.89

110

0.925

6.29 (55.7)

1750 (3859)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8184-1. C 2...

0.89

33

0.872

0.489 (4.3)

340 (750)

1XB7322-P05

85

6SL3120-1TE28- 5AA3

1PH8186-1. C 2...

0.86

49

0.898

0.652 (5.8)

410 (904)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8224-1. C 2 ...

0.89

48

0.914

1.45 (12.8)

610 (1345)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8226-1. C 2 ...

0.88

79

0.928

1.90 (16.8)

740 (1632)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8228-1. C 2 ...

0.90

82

0.930

2.35 (20.8)

870 (1918)

1XB7322-P05

210

6SL3320-1TE32- 1AA3

1PH8284-1. C 2 ...

0.87

108

0.945

4.21 (37.3)

1280 (2822)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8286-1. C 2 ...

0.89

123

0.948

5.16 (45.7)

1490 (3285)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8288-1. C 2 ...

0.88

172

0.952

6.29 (55.7)

1750 (3859)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8184-1. D 2...

0.88

45

0.904

0.489 (4.3)

340 (750)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8186-1. D 2...

0.85

78

0.920

0.652 (5.8)

410 (904)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-1. D 2 ...

0.87

79

0.937

1.45 (12.8)

610 (1345)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8226-1. D 2 ...

0.89

87

0.938

1.90 (16.8)

740 (1632)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8228-1. D 2 ...

0.91

98

0.943

2.35 (20.8)

870 (1918)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8284-1. D 2 ...

0.88

144

0.957

4.21 (37.3)

1280 (2822)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8286-1. D 2 ...

0.85

215

0.960

5.16 (45.7)

1490 (3285)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8288-1. D 2 ...

0.86

251

0.962

6.29 (55.7)

1750 (3859)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8184-1. F 2...

0.87

66

0.928

0.489 (4.3)

340 (750)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-1. F 2...

0.88

85

0.935

0.652 (5.8)

410 (904)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-1. F 2 ...

0.89

87

0.951

1.45 (12.8)

610 (1345)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8226-1. F 2 ...

0.87

119

0.957

1.90 (16.8)

740 (1632)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8228-1. F 2 ...

0.87

169

0.959

2.35 (20.8)

870 (1918)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8284-1. F 2 ...

0.89

161

0.964

4.21 (37.3)

1280 (2822)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8286-1. F 2 ...

0.90

181

0.966

5.16 (45.7)

1490 (3285)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8288-1. F 2 ...

0.90

234

0.967

6.29 (55.7)

1750 (3859)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8184-1. L 2...

0.87

75

0.945

0.489 (4.3)

340 (750)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-1. L 2 ...

0.87

109

0.948

0.652 (5.8)

410 (904)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8224-1. L 2 ...

0.87

113

0.961

1.45 (12.8)

610 (1345)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8226-1. L 2 ...

0.87

151

0.963

1.90 (16.8)

740 (1632)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8228-1. L 2 ...

0.87

181

0.964

2.35 (20.8)

870 (1918)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1)
2)
3)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A to D, E and F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
Siemens PM 21 2011

5/37

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Water cooling

Line voltage 400 V 3 AC, Active Line Module

500

180
225

280

5
800

335

17.4

1800

5000

1PH8184-17 B 2 7 - .. . 1

335

17.3

2200

5000

1PH8186-17 B 2 7 - .. . 1

46 (61.7)

879 (648)

100

335

17.3

1500

4500

1PH8224-17 B 2 7 - .. . 1

59 (79.1)

1127 (831)

128

330

17.3

1700

4500

1PH8226-17 B 2 7 - .. . 1

72 (96.6)

1375 (1014)

150

340

17.2

1800

4500

1PH8228-17 B 2 7 - .. . 1

89 (119)

1700 (1254)

172

365

17.1

2200

3300

1PH8284-17 B 2 7 - .. . 1

111 (149)

2120 (1564)

205

375

17.0

2200

3300

1PH8286-17 B 2 7 - .. . 1

136 (182)

2598 (1916)

260

365

17.0

2200

3300

1PH8288-17 B 2 7 - .. . 1

454 (335)

77

365

27.5

2900

5000

1PH8184-17 C 2 7 - .. . 1

49 (65.7)

585 (431)

99

360

27.4

3500

5000

1PH8186-17 C 2 7 - .. . 1

225

70 (93.9)

836 (617)

130

380

27.3

2300

4500

1PH8224-17 C 2 7 - .. . 1

93 (125)

1110 (819)

186

350

27.2

2500

4500

1PH8226-17 C 2 7 - .. . 1

110 (148)

1313 (968)

210

360

27.2

2700

4500

1PH8228-17 C 2 7 - .. . 1

141 (189)

1683 (1241)

260

375

27.0

2200

3300

1PH8284-17 C 2 7 - .. . 1

175 (235)

2089 (1541)

320

375

27.0

2200

3300

1PH8286-17 C 2 7 - .. . 1

215 (288)
180

280

180
225

2567 (1893)

405

370

27.0

2200

3300

1PH8288-17 C 2 7 - .. . 1

54 (72.4)

448 (330)

112

350

39.2

5000

5000

1PH8184-17 D 2 7 - .. . 1

74 (99.2)

615 (454)

148

370

38.9

5000

5000

1PH8186-17 D 2 7 - .. . 1

101 (135)

839 (619)

186

385

38.9

3000

4500

1PH8224-17 D 2 7 - .. . 1

131 (176)

1088 (803)

230

390

38.9

2700

4500

1PH8226-17 D 2 7 - .. . 1

161 (216)

1337 (986)

280

390

38.9

2500

4500

1PH8228-17 D 2 7 - .. . 1

198 (266)

1644 (1213)

355

385

38.7

2200

3300

1PH8284-17 D 2 7 - .. . 1

246 (330)

2043 (1507)

455

380

38.6

2200

3300

1PH8286-17 D 2 7 - .. . 1

304 (408)

2525 (1862)

550

385

38.6

2300

3300

1PH8288-17 D 2 7 - .. . 1

82 (110)

447 (330)

150

390

59.3

5000

5000

1PH8184-17 F 2 7 - .. . 1

111 (149)

606 (447)

200

385

59.3

5000

5000

1PH8186-17 F 2 7 - .. . 1

138 (185)

753 (555)

240

395

58.9

3800

4500

1PH8224-17 F 2 7 - .. . 1

169 (227)

922 (680)

295

390

58.8

3900

4500

1PH8226-17 F 2 7 - .. . 1

221 (296)

1206 (890)

390

390

58.8

3900

4500

1PH8228-17 F 2 7 - .. . 1

265 (355)

1446 (1067)

445

400

58.7

2200

3300

1PH8284-17 F 2 7 - .. . 1

328 (440)

1790 (1320)

540

400

58.7

2300

3300

1PH8286-17 F 2 7 - .. . 1

403 (540)

2199 (1622)

670

400

58.7

2400

3300

1PH8288-17 F 2 7 - .. . 1

180

102 (137)

336 (248)

182

395

97.5

5000

5000

1PH8184-17 L 2 7 - .. . 1

135 (181)

445 (328)

245

385

97.3

5000

5000

1PH8186-17 L 2 7 - .. . 1

225

164 (220)

540 (398)

285

395

97.1

3600

4500

1PH8224-17 L 2 7 - .. . 1

204 (274)

672 (496)

360

390

97.1

3600

4500

1PH8226-17 L 2 7 - .. . 1

237 (318)

780 (575)

415

395

97.0

3600

4500

280

2900

54
70

38 (51.0)

225

1750

439 (324)
573 (423)

180

280

1150

23 (30.8)
30 (40.2)

1PH8228-17 L 2 7 - .. . 1
For versions, see
Order No. supplement
and options on page 5/56.

5/38

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

Weight,
approx.

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system
Order No.

1PH8184-1. B 2 ...

0.86

27

0.850

0.489 (4.3)

340 (750)

1XB7322-P05

60

6SL3120-1TE26- 0AA3

1PH8186-1. B 2 ...

0.85

43

0.868

0.652 (5.8)

410 (904)

1XB7322-P05

85

6SL3120-1TE28- 5AA3

1PH8224-1. B 2...

0.90

38

0.883

1.45 (12.8)

610 (1345)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8226-1. B 2...

0.90

50

0.899

1.90 (16.8)

740 (1632)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8228-1. B 2...

0.90

63

0.908

2.35 (20.8)

870 (1918)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8284-1. B 2 ...

0.88

69

0.929

4.21 (37.3)

1280 (2822)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8286-1. B 2 ...

0.89

84

0.931

5.16 (45.7)

1490 (3285)

1XB7322-P05

210

6SL3320-1TE32- 1AA3

1PH8288-1. B 2...

0.88

109

0.938

6.29 (55.7)

1750 (3859)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8184-1. C 2 ...

0.88

33

0.885

0.489 (4.3)

340 (750)

1XB7322-P05

85

6SL3120-1TE28- 5AA3

1PH8186-1. C 2 ...

0.88

44

0.904

0.652 (5.8)

410 (904)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8224-1. C 2...

0.89

46

0.920

1.45 (12.8)

610 (1345)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8226-1. C 2...

0.88

77

0.934

1.90 (16.8)

740 (1632)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8228-1. C 2...

0.90

82

0.937

2.35 (20.8)

870 (1918)

1XB7322-P05

210

6SL3320-1TE32- 1AA3

1PH8284-1. C 2...

0.88

108

0.950

4.21 (37.3)

1280 (2822)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8286-1. C 2...

0.88

126

0.953

5.16 (45.7)

1490 (3285)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8288-1. C 2...

0.87

172

0.956

6.29 (55.7)

1750 (3859)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8184-1. D 2 ...

0.87

46

0.915

0.489 (4.3)

340 (750)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8186-1. D 2 ...

0.84

80

0.927

0.652 (5.8)

410 (904)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-1. D 2...

0.86

79

0.944

1.45 (12.8)

610 (1345)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8226-1. D 2...

0.89

87

0.945

1.90 (16.8)

740 (1632)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8228-1. D 2...

0.90

98

0.948

2.35 (20.8)

870 (1918)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8284-1. D 2...

0.87

144

0.960

4.21 (37.3)

1280 (2822)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8286-1. D 2...

0.85

216

0.962

5.16 (45.7)

1490 (3285)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8288-1. D 2...

0.86

251

0.964

6.29 (55.7)

1750 (3859)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8184-1. F 2 ...

0.87

65

0.933

0.489 (4.3)

340 (750)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-1. F 2 ...

0.89

85

0.939

0.652 (5.8)

410 (904)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-1. F 2...

0.88

87

0.954

1.45 (12.8)

610 (1345)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8226-1. F 2...

0.88

116

0.959

1.90 (16.8)

740 (1632)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8228-1. F 2...

0.87

165

0.961

2.35 (20.8)

870 (1918)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8284-1. F 2...

0.89

161

0.966

4.21 (37.3)

1280 (2822)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8286-1. F 2...

0.90

182

0.967

5.16 (45.7)

1490 (3285)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8288-1. F 2...

0.90

232

0.968

6.29 (55.7)

1750 (3859)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8184-1. L 2 ...

0.87

77

0.945

0.489 (4.3)

340 (750)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-1. L 2...

0.87

108

0.948

0.652 (5.8)

410 (904)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8224-1. L 2...

0.88

114

0.961

1.45 (12.8)

610 (1345)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8226-1. L 2...

0.87

152

0.962

1.90 (16.8)

740 (1632)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8228-1. L 2...

0.87

182

0.963

2.35 (20.8)

870 (1918)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1)
2)
3)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A to D, E and F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
Siemens PM 21 2011

5/39

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Water cooling

Line voltage 480 V 3 AC, Smart/Basic/Active Line Module

600

29 (38.9)

462 (341)

55

405

20.8

1800

5000

1PH8184-17 B 2 7 - .. . 1

38 (51.0)

605 (446)

73

405

20.6

2500

5000

1PH8186-17 B 2 7 - .. . 1

53 (71.1)

844 (623)

94

410

20.6

1900

4500

1PH8224-17 B 2 7 - .. . 1

70 (93.9)

1114 (822)

122

410

20.5

2000

4500

1PH8226-17 B 2 7 - .. . 1

85 (114)

1353 (998)

148

410

20.5

2100

4500

1PH8228-17 B 2 7 - .. . 1

107 (143)

1703 (1256)

170

440

20.4

2200

3300

1PH8284-17 B 2 7 - .. . 1

133 (178)

2117 (1561)

205

445

20.4

2200

3300

1PH8286-17 B 2 7 - .. . 1

164 (220)

2610 (1925)

260

440

20.3

2200

3300

1PH8288-17 B 2 7 - .. . 1

180

48 (64)

458 (338)

77

460

34.1

3100

5000

1PH8184-17 C 2 7 - .. . 1

61 (82)

583 (430)

98

450

34.0

3700

5000

1PH8186-17 C 2 7 - .. . 1

225

87 (117)

831 (613)

132

460

34.0

2500

4500

1PH8224-17 C 2 7 - .. . 1

116 (156)

1108 (817)

184

440

33.9

2700

4500

1PH8226-17 C 2 7 - .. . 1

138 (185)

1318 (972)

210

450

33.9

2900

4500

1PH8228-17 C 2 7 - .. . 1

176 (236)

1681 (1240)

265

455

33.7

2200

3300

1PH8284-17 C 2 7 - .. . 1

219 (294)

2091 (1542)

325

455

33.7

2200

3300

1PH8286-17 C 2 7 - .. . 1

269 (361)

180
225

280

5
1000

280

1350

2569 (1895)

405

460

33.6

2200

3300

1PH8288-17 C 2 7 - .. . 1

64 (85.8)

453 (334)

112

410

45.8

5000

5000

1PH8184-17 D 2 7 - .. . 1

86 (115)

608 (448)

148

420

45.7

5000

5000

1PH8186-17 D 2 7 - .. . 1

115 (154)

813 (600)

180

450

45.5

3400

4500

1PH8224-17 D 2 7 - .. . 1

150 (201)

1061 (783)

225

460

45.5

3200

4500

1PH8226-17 D 2 7 - .. . 1

184 (247)

1302 (960)

270

460

45.5

3000

4500

1PH8228-17 D 2 7 - .. . 1

232 (311)

1641 (1210)

355

450

45.4

2200

3300

1PH8284-17 D 2 7 - .. . 1

289 (388)

2044 (1508)

460

445

45.3

2300

3300

1PH8286-17 D 2 7 - .. . 1

357 (479)

2525 (1862)

550

450

45.3

2400

3300

1PH8288-17 D 2 7 - .. . 1

95 (127)

454 (335)

152

450

67.3

5000

5000

1PH8184-17 F 2 7 - .. . 1

126 (169)

602 (444)

200

445

67.3

5000

5000

1PH8186-17 F 2 7 - .. . 1

155 (208)

740 (546)

235

460

67.2

4200

4500

1PH8224-17 F 2 7 - .. . 1

191 (256)

912 (673)

290

450

67.1

4100

4500

1PH8226-17 F 2 7 - .. . 1

245 (329)

1170 (863)

380

450

67.1

4100

4500

1PH8228-17 F 2 7 - .. . 1

303 (406)

1447 (1067)

445

455

67.0

2300

3300

1PH8284-17 F 2 7 - .. . 1

375 (503)

1791 (1321)

550

455

67.0

2400

3300

1PH8286-17 F 2 7 - .. . 1

460 (617)

2197 (1621)

670

455

67.0

2500

3300

1PH8288-17 F 2 7 - .. . 1

180

100 (134)

281 (207)

158

460

114.0

5000

5000

1PH8184-17 L 2 7 - .. . 1

121 (162)

340 (251)

200

455

113.5

5000

5000

1PH8186-17 L 2 7 - .. . 1

225

164 (220)

461 (340)

255

460

114.0

4100

4500

1PH8224-17 L 2 7 - .. . 1

199 (267)

559 (412)

310

460

114.0

4100

4500

1PH8226-17 L 2 7 - .. . 1

237 (318)

666 (491)

370

460

114.0

4100

4500

180
225

280

2000

180
225

280

3400

1PH8228-17 L 2 7 - .. . 1
For versions, see
Order No. supplement
and options on page 5/56.

5/40

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment
of inertia

cos

Weight,
approx.

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system
Order No.

1PH8184-1. B 2 ...

0.86

28

0.869

0.489 (4.3)

340 (750)

1XB7322-P05

60

6SL3120-1TE26- 0AA3

1PH8186-1. B 2 ...

0.84

44

0.883

0.652 (5.8)

410 (904)

1XB7322-P05

85

6SL3120-1TE28- 5AA3

1PH8224-1. B 2...

0.87

40

0.908

1.45 (12.8)

610 (1345)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8226-1. B 2...

0.88

55

0.919

1.90 (16.8)

740 (1632)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8228-1. B 2...

0.88

64

0.923

2.35 (20.8)

870 (1918)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8284-1. B 2 ...

0.88

71

0.939

4.21 (37.3)

1280 (2822)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8286-1. B 2 ...

0.89

83

0.940

5.16 (45.7)

1490 (3285)

1XB7322-P05

210

6SL3320-1TE32- 1AA3

1PH8288-1. B 2...

0.88

111

0.946

6.29 (55.7)

1750 (3859)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8184-1. C 2 ...

0.86

34

0.905

0.489 (4.3)

340 (750)

1XB7322-P05

85

6SL3120-1TE28- 5AA3

1PH8186-1. C 2 ...

0.87

44

0.920

0.652 (5.8)

410 (904)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8224-1. C 2...

0.89

44

0.931

1.45 (12.8)

610 (1345)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8226-1. C 2...

0.88

79

0.944

1.90 (16.8)

740 (1632)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8228-1. C 2...

0.89

83

0.946

2.35 (20.8)

870 (1918)

1XB7322-P05

210

6SL3320-1TE32- 1AA3

1PH8284-1. C 2...

0.88

102

0.956

4.21 (37.3)

1280 (2822)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8286-1. C 2...

0.89

120

0.958

5.16 (45.7)

1490 (3285)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8288-1. C 2...

0.87

171

0.961

6.29 (55.7)

1750 (3859)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8184-1. D 2 ...

0.87

46

0.924

0.489 (4.3)

340 (750)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8186-1. D 2 ...

0.86

73

0.933

0.652 (5.8)

410 (904)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-1. D 2...

0.86

79

0.950

1.45 (12.8)

610 (1345)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8226-1. D 2...

0.88

88

0.951

1.90 (16.8)

740 (1632)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8228-1. D 2...

0.90

99

0.954

2.35 (20.8)

870 (1918)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8284-1. D 2...

0.87

143

0.963

4.21 (37.3)

1280 (2822)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8286-1. D 2...

0.85

216

0.964

5.16 (45.7)

1490 (3285)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8288-1. D 2...

0.86

249

0.966

6.29 (55.7)

1750 (3859)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8184-1. F 2 ...

0.85

68

0.938

0.489 (4.3)

340 (750)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-1. F 2 ...

0.87

89

0.943

0.652 (5.8)

410 (904)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-1. F 2...

0.86

90

0.958

1.45 (12.8)

610 (1345)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8226-1. F 2...

0.88

118

0.961

1.90 (16.8)

740 (1632)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8228-1. F 2...

0.86

169

0.963

2.35 (20.8)

870 (1918)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8284-1. F 2...

0.89

160

0.967

4.21 (37.3)

1280 (2822)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8286-1. F 2...

0.90

180

0.968

5.16 (45.7)

1490 (3285)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8288-1. F 2...

0.90

230

0.969

6.29 (55.7)

1750 (3859)

1XB7712-P03

840

6SL3320-1TE38- 4AA3

1PH8184-1. L 2 ...

0.84

76

0.944

0.489 (4.3)

340 (750)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-1. L 2...

0.81

110

0.942

0.652 (5.8)

410 (904)

1XB7422-P06

260

6SL3320-1TE32- 6AA3

1PH8224-1. L 2...

0.84

113

0.959

1.45 (12.8)

610 (1345)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8226-1. L 2...

0.84

153

0.958

1.90 (16.8)

740 (1632)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8228-1. L 2...

0.84

180

0.959

2.35 (20.8)

870 (1918)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1)
2)
3)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A to D, E and F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
Siemens PM 21 2011

5/41

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed during
field weakening, max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

n2

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 asynchronous
motor
Water cooling

Line voltage 690 V 3 AC, Basic Line Module

400

700

1000

1500

280

280

280

280

68 (91.2)

1624 (1198)

89

555

13.7

2000

3300

1PH8284-17 H 2 7 - .. . 1

85 (114)

2029 (1497)

108

555

13.7

2000

3300

1PH8286-17 H 2 7 - .. . 1

105 (141)

2507 (1849)

134

555

13.7

2000

3300

1PH8288-17 H 2 7 - .. . 1

119 (160)

1624 (1197)

136

605

23.7

2200

3300

1PH8284-17 K 2 7 - .. . 1

148 (198)

2019 (1489)

174

605

23.6

2200

3300

1PH8286-17 K 2 7 - .. . 1

182 (244)

2483 (1831)

205

605

23.7

2200

3300

1PH8288-17 K 2 7 - .. . 1

167 (224)

1595 (1176)

196

600

33.6

2200

3300

1PH8284-17 U 2 7 - .. . 1

208 (279)

1986 (1465)

260

570

33.6

2200

3300

1PH8286-17 U 2 7 - .. . 1

256 (343)

2445 (1803)

310

580

33.6

2200

3300

1PH8288-17 U 2 7 - .. . 1

220 (295)

1401 (1033)

250

590

50.4

2200

3300

1PH8284-17 W2 7 - .. . 1

273 (366)

1738 (1282)

310

590

50.4

2200

3300

1PH8286-17 W2 7 - .. . 1

335 (449)

2133 (1573)

375

590

50.3

2200

3300

1PH8288-17 W2 7 - .. . 1

Line voltage 690 V 3 AC, Active Line Module

500

800

1150

1750

280

280

280

280

85 (114)

1624 (1198)

89

690

17.0

2000

3300

1PH8284-17 H 2 7 - .. . 1

106 (142)

2025 (1494)

108

690

17.0

2000

3300

1PH8286-17 H 2 7 - .. . 1

131 (176)

2502 (1845)

134

690

17.0

2000

3300

1PH8288-17 H 2 7 - .. . 1

137 (184)

1635 (1206)

138

690

27.0

2200

3300

1PH8284-17 K 2 7 - .. . 1

170 (228)

2029 (1497)

176

690

27.0

2200

3300

1PH8286-17 K 2 7 - .. . 1

209 (280)

2495 (1840)

205

690

27.0

2200

3300

1PH8288-17 K 2 7 - .. . 1

192 (257)

1594 (1176)

198

690

38.6

2200

3300

1PH8284-17 U 2 7 - .. . 1

239 (320)

1985 (1464)

260

655

38.6

2200

3300

1PH8286-17 U 2 7 - .. . 1

295 (396)

2450 (1807)

310

665

38.6

2300

3300

1PH8288-17 U 2 7 - .. . 1

257 (345)

1401 (1033)

250

690

58.7

2200

3300

1PH8284-17 W2 7 - .. . 1

318 (426)

1735 (1280)

305

690

58.7

2300

3300

1PH8286-17 W2 7 - .. . 1

391 (524)

2134 (1574)

375

690

58.7

2400

3300

1PH8288-17 W2 7 - .. . 1
For versions, see
Order No. supplement
and options on page 5/56.

5/42

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous motors
Water cooling, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency

Moment of
inertia

cos

J
kgm2 (lbf-in-s2) kg (lb)

1)
2)
3)

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

Type

Order No.

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system

1PH8284-1. H 2...

0.87

41

0.917

4.21 (37.3)

1280 (2822)

1XB7322-P05

100

6SL3320-1TG31- 0AA3

1PH8286-1. H 2...

0.89

45

0.917

5.16 (45.7)

1490 (3285)

1XB7322-P05

120

6SL3320-1TG31- 2AA3

1PH8288-1. H 2...

0.88

58

0.923

6.29 (55.7)

1750 (3859)

1XB7322-P05

150

6SL3320-1TG31- 5AA3

1PH8284-1. K 2...

0.88

54

0.942

4.21 (37.3)

1280 (2822)

1XB7322-P05

150

6SL3320-1TG31- 5AA3

1PH8286-1. K 2...

0.85

84

0.950

5.16 (45.7)

1490 (3285)

1XB7322-P05

215

6SL3320-1TG32- 2AA3

1PH8288-1. K 2...

0.90

77

0.946

6.29 (55.7)

1750 (3859)

1XB7322-P05

260

6SL3320-1TG32- 6AA3

1PH8284-1. U 2...

0.86

89

0.956

4.21 (37.3)

1280 (2822)

1XB7322-P05

215

6SL3320-1TG32- 2AA3

1PH8286-1. U 2...

0.85

123

0.959

5.16 (45.7)

1490 (3285)

1XB7700-P02

330

6SL3320-1TG33- 3AA3

1PH8288-1. U 2...

0.86

145

0.961

6.29 (55.7)

1750 (3859)

1XB7700-P02

410

6SL3320-1TG34- 1AA3

1PH8284-1.W 2...

0.89

92

0.963

4.21 (37.3)

1280 (2822)

1XB7422-P06

330

6SL3320-1TG33- 3AA3

1PH8286-1.W 2...

0.90

104

0.965

5.16 (45.7)

1490 (3285)

1XB7700-P02

410

6SL3320-1TG34- 1AA3

1PH8288-1.W 2...

0.90

132

0.966

6.29 (55.7)

1750 (3859)

1XB7700-P02

465

6SL3320-1TG34- 7AA3

1PH8284-1. H 2...

0.86

41

0.931

4.21 (37.3)

1280 (2822)

1XB7322-P05

100

6SL3320-1TG31- 0AA3

1PH8286-1. H 2...

0.88

45

0.931

5.16 (45.7)

1490 (3285)

1XB7322-P05

120

6SL3320-1TG31- 2AA3

1PH8288-1. H 2...

0.88

58

0.936

6.29 (55.7)

1750 (3859)

1XB7322-P05

150

6SL3320-1TG31- 5AA3

1PH8284-1. K 2...

0.88

54

0.947

4.21 (37.3)

1280 (2822)

1XB7322-P05

150

6SL3320-1TG31- 5AA3

1PH8286-1. K 2...

0.85

84

0.954

5.16 (45.7)

1490 (3285)

1XB7322-P05

215

6SL3320-1TG32- 2AA3

1PH8288-1. K 2...

0.90

77

0.951

6.29 (55.7)

1750 (3859)

1XB7322-P05

260

6SL3320-1TG32- 6AA3

1PH8284-1. U 2...

0.85

90

0.959

4.21 (37.3)

1280 (2822)

1XB7322-P05

215

6SL3320-1TG32- 2AA3

1PH8286-1. U 2...

0.85

123

0.962

5.16 (45.7)

1490 (3285)

1XB7700-P02

330

6SL3320-1TG33- 3AA3

1PH8288-1. U 2...

0.86

144

0.963

6.29 (55.7)

1750 (3859)

1XB7700-P02

410

6SL3320-1TG34- 1AA3

1PH8284-1.W 2...

0.89

92

0.965

4.21 (37.3)

1280 (2822)

1XB7422-P06

330

6SL3320-1TG33- 3AA3

1PH8286-1.W 2...

0.90

104

0.967

5.16 (45.7)

1490 (3285)

1XB7700-P02

410

6SL3320-1TG34- 1AA3

1PH8288-1.W 2...

0.90

133

0.968

6.29 (55.7)

1750 (3859)

1XB7700-P02

465

6SL3320-1TG34- 7AA3

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nmax: Maximum speed that must not be exceeded (applicable to Standard: 14th data position A and B, E and F).
The rated pulse frequencies must be taken into account. The rated motor data is valid for 2 kHz.
Siemens PM 21 2011

5/43

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed,
max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

nmax, Inv

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 synchronous
motor
Forced ventilation

Line voltage 400 V 3 AC, Smart/Basic Line Module

1500

132

160

15.7 (21.1)

100 (73.8)

29

388

50.0

2550

4500

1PH8131-2 7 F . 7 - .. . 1

19.9 (26.7)

127 (93.7)

44

316

50.0

3050

4500

1PH8133-2 7 F . 7 - .. . 1

23.7 (31.8)

151 (111)

43

383

50.0

2450

4500

1PH8135-2 7 F . 7 - .. . 1

30.6 (41.0)

195 (144)

60

356

50.0

2700

4500

1PH8137-2 7 F . 7 - .. . 1

61 (81.8)

390 (288)

119

340

100.0

2600

4000

1PH8165-2 7 F . 7 - .. . 1

69 (92.5)

435 (321)

133

345

100.0

2600

4000

1PH8167-2 7 F . 7 - .. . 1

150 (111)

59

356

66.7

3500

4500

1PH8135-2 7 G. 7 - .. . 1

96 (71)

44

371

83.3

4050

4500

1PH8131-2 7 L . 7 - .. . 1

31.7 (42.5)

121 (89)

55

371

83.3

3950

4500

1PH8133-2 7 L . 7 - .. . 1

48.4 (64.9)

185 (136)

83

371

83.3

3900

4500

1PH8137-2 7 L . 7 - .. . 1

84 (113)

320 (236)

148

370

167.0

3900

4000

1PH8165-2 7 L . 7 - .. . 1

95 (127)

360 (266)

177

350

167.0

4000

4000

1PH8167-2 7 L . 7 - .. . 1

57.5 (77.1)

183 (135)

104

370

100.0

4500

4500

1PH8137-2 7 M. 7 - .. . 1

2000

132

31.4 (42.1)

2500

132

25 (33.5)

160
3000

132

Line voltage 400 V 3 AC, Active Line Module

1750

132

160

98 (72.3)

29

415

58.3

2550

4500

1PH8131-2 7 F . 7 - .. . 1

23.1 (31.0)

126 (92.9)

43

366

58.3

3050

4500

1PH8133-2 7 F . 7 - .. . 1

27.2 (36.5)

149 (110)

42

415

58.3

2450

4500

1PH8135-2 7 F . 7 - .. . 1

35.6 (47.7)

194 (143)

59

412

58.3

2700

4500

1PH8137-2 7 F . 7 - .. . 1

69 (92.5)

375 (277)

115

395

117.0

2600

4000

1PH8165-2 7 F . 7 - .. . 1

77 (103)

420 (310)

128

400

117.0

2600

4000

1PH8167-2 7 F . 7 - .. . 1

18 (24.1)

2300

132

35.6 (47.7)

148 (109)

59

407

76.7

3500

4500

1PH8135-2 7 G. 7 - .. . 1

2800

132

27.7 (37.1)

95 (70.1)

44

415

93.3

4050

4500

1PH8131-2 7 L . 7 - .. . 1

35.2 (47.2)

120 (88.5)

54

415

93.3

3950

4500

1PH8133-2 7 L . 7 - .. . 1

53.4 (71.6)

182 (134)

82

415

93.3

3900

4500

1PH8137-2 7 L . 7 - .. . 1

87 (117)

300 (221)

138

410

187.0

3900

4000

1PH8165-2 7 L . 7 - .. . 1

98 (131)

335 (247)

164

385

187.0

4000

4000

1PH8167-2 7 L . 7 - .. . 1

62.2 (83.4)

180 (133)

102

405

110.0

4500

4500

1PH8137-2 7 M. 7 - .. . 1

160
3300

132

Line voltage 480 V 3 AC, Smart/Basic/Active Line Module

2000

132

160

19.9 (26.7)

95 (70.1)

29

449

66.7

2550

4500

1PH8131-2 7 F . 7 - .. . 1

26.2 (35.1)

125 (92.2)

43

415

66.7

3050

4500

1PH8133-2 7 F . 7 - .. . 1

30.2 (40.5)

144 (106)

42

449

66.7

2450

4500

1PH8135-2 7 F . 7 - .. . 1

40.0 (53.6)

191 (141)

59

449

66.7

2700

4500

1PH8137-2 7 F . 7 - .. . 1

74 (99.2)

355 (262)

110

445

133.0

2600

4000

1PH8165-2 7 F . 7 - .. . 1

82 (110)

395 (291)

123

450

133.0

2600

4000

1PH8167-2 7 F . 7 - .. . 1

2650

132

40.2 (53.9)

145 (107)

58

449

88.3

3500

4500

1PH8135-2 7 G. 7 - .. . 1

3000

132

29.5 (39.6)

94 (69.3)

43

449

100.0

4050

4500

1PH8131-2 7 L . 7 - .. . 1

37.4 (50.2)

119 (87.8)

54

449

100.0

3950

4500

1PH8133-2 7 L . 7 - .. . 1

56.9 (76.3)

181 (134)

81

449

100.0

3900

4500

1PH8137-2 7 L . 7 - .. . 1

89 (119)

285 (210)

131

440

200.0

3900

4000

1PH8165-2 7 L . 7 - .. . 1

99 (133)

315 (232)

155

410

200.0

4000

4000

1PH8167-2 7 L . 7 - .. . 1

66.7 (89.4)

177 (131)

100

440

120.0

4500

4500

160
3600

132

1PH8137-2 7 M. 7 - .. . 1
For versions, see
Order No. supplement
and options on page 5/54.

5/44

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Static
torque

Static
current

Efficiency

Moment of
inertia

M0

I0

Nm (lbf-ft)

kgm2 (lbf-in-s2)

Weight,
approx.

kg (lb)

Terminal
box

Type

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8131-2 . F ...

105 (77.4)

30

0.944

0.0446 (0.39)

85 (187)

gk833

30

6SL312 7 -1TE23 - 0AA3

1PH8133-2 . F ...

131 (96.6)

45

0.948

0.0600 (0.53)

103 (227)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8135-2 . F ...

158 (117)

44

0.952

0.0750 (0.66)

120 (265)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8137-2 . F ...

203 (150)

62

0.952

0.0885 (0.78)

136 (300)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8165-2 . F ...

440 (325)

126

0.940

0.2160 (1.91)

218 (481)

gk874

132

6SL312 7 -1TE31 - 3AA3

1PH8167-2 . F ...

500 (369)

143

0.940

0.2440 (2.16)

240 (529)

gk874

1325)

6SL312 7 -1TE31 - 3AA3

1PH8135-2 . G...

158 (117)

63

0.953

0.0750 (0.66)

120 (265)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8131-2 . L ...

105 (77.4)

48

0.948

0.0446 (0.39)

85 (187)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8133-2 . L ...

131 (96.6)

59

0.951

0.0600 (0.53)

103 (227)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8137-2 . L ...

203 (150)

894)

0.954

0.0885 (0.78)

136 (300)

gk833

85

6SL312 7 -1TE28 - 5AA3

1PH8165-2 . L ...

440 (325)

188

0.955

0.2160 (1.91)

218 (481)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8167-2 . L ...

500 (369)

230

0.955

0.2440 (2.16)

240 (529)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8137-2 . M...

203 (150)

1154)

0.953

0.0885 (0.78)

136 (300)

gk833

132

6SL312 7 -1TE31 - 3AA3

1PH8131-2 . F ...

105 (77.4)

30

0.947

0.0446 (0.39)

85 (187)

gk833

30

6SL312 7 -1TE23 - 0AA3

1PH8133-2 . F ...

131 (96.6)

45

0.950

0.0600 (0.53)

103 (227)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8135-2 . F ...

158 (117)

44

0.952

0.0750 (0.66)

120 (265)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8137-2 . F ...

203 (150)

62

0.953

0.0885 (0.78)

136 (300)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8165-2 . F ...

440 (325)

126

0.943

0.2160 (1.91)

218 (481)

gk874

132

6SL312 7 -1TE31 - 3AA3

1PH8167-2 . F ...

500 (369)

143

0.943

0.2440 (2.16)

240 (529)

gk874

132

6SL312 7 -1TE31 - 3AA3

1PH8135-2 . G...

158 (117)

63

0.953

0.0750 (0.66)

120 (265)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8131-2 . L ...

105 (77.4)

48

0.949

0.0446 (0.39)

85 (187)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8133-2 . L ...

131 (96.6)

59

0.952

0.0600 (0.53)

103 (227)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8137-2 . L ...

203 (150)

894)

0.953

0.0885 (0.78)

136 (300)

gk833

85

6SL312 7 -1TE28 - 5AA3

1PH8165-2 . L ...

440 (325)

188

0.959

0.2160 (1.91)

218 (481)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8167-2 . L ...

500 (369)

230

0.959

0.2440 (2.16)

240 (529)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8137-2 . M...

203 (150)

1154)

0.952

0.0885 (0.78)

136 (300)

gk833

132

6SL312 7 -1TE31 - 3AA3

1PH8131-2 . F ...

105 (77.4)

30

0.948

0.0446 (0.39)

85 (187)

gk833

30

6SL312 7 -1TE23 - 0AA3

1PH8133-2 . F ...

131 (96.6)

45

0.951

0.0600 (0.53)

103 (227)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8135-2 . F ...

158 (117)

44

0.953

0.0750 (0.66)

120 (265)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8137-2 . F ...

203 (150)

62

0.954

0.0885 (0.78)

136 (300)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8165-2 . F ...

440 (325)

126

0.946

0.2160 (1.91)

218 (481)

gk874

132

6SL312 7 -1TE31 - 3AA3

1PH8167-2 . F ...

500 (369)

143

0.946

0.2440 (2.16)

240 (529)

gk874

132

6SL312 7 -1TE31 - 3AA3

1PH8135-2 . G...

158 (117)

63

0.952

0.0750 (0.66)

120 (265)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8131-2 . L ...

105 (77.4)

48

0.951

0.0446 (0.39)

85 (187)

gk833

45

6SL312 7 -1TE24 - 5AA3

1PH8133-2 . L ...

131 (96.6)

59

0.952

0.0600 (0.53)

103 (227)

gk833

60

6SL312 7 -1TE26 - 0AA3

1PH8137-2 . L ...

203 (150)

894)

0.953

0.0885 (0.78)

136 (300)

gk833

85

6SL312 7 -1TE28 - 5AA3

1PH8165-2 . L ...

440 (325)

188

0.960

0.2160 (1.91)

218 (481)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8167-2 . L ...

500 (369)

230

0.960

0.2440 (2.16)

240 (529)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8137-2 . M...

203 (150)

1154)

0.950

0.0885 (0.78)

136 (300)

gk833

132

6SL312 7 -1TE31 - 3AA3

Cooling:
Internal air cooling
External air cooling
1)
2)
3)
4)
5)

0
1

nmax,Inv: Maximum permissible operating speed based on the induced voltage in the motor and the voltage strength of the Motor Module
(without protective circuit).
nmax: Maximum speed that must not be exceeded.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz.
Above approx. 85 A, connection type "Power connector top" is not possible (15th data position E to H).
Power connector is generally not possible with 1PH816.
The rated output current of the Motor Module is lower than the rated motor current at 4 kHz.
Siemens PM 21 2011

5/45

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Water cooling, IP65 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
Operating
frequency speed,
max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

nmax, Inv

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 synchronous
motor
Water cooling

Line voltage 400 V 3 AC, Smart/Basic Line Module

1500

17.6 (23.6)

112 (82.6)

40

326

50.0

3150

4500

1PH8131-2 7 F2 7 - ... 1

23.1 (31.0)

147 (108)

42

371

50.0

2450

4500

1PH8133-2 7 F2 7 - ... 1

29.7 (39.8)

189 (139)

57

384

50.0

2650

4500

1PH8135-2 7 F2 7 - ... 1

32.7 (43.9)

208 (153)

58

371

50.0

2350

4500

1PH8137-2 7 F2 7 - ... 1

44.9 (60.2)

286 (211)

118

316

50.0

3500

4500

1PH8138-2 7 F2 7 - ... 1

59.0 (79.1)

375 (277)

111

380

100.0

2400

4000

1PH8164-2 7 F2 7 - ... 1

74.0 (99.2)

475 (350)

148

355

100.0

2600

4000

1PH8166-2 7 F2 7 - ... 1

84.0 (113)

530 (391)

169

355

100.0

2600

4000

1PH8168-2 7 F2 7 - ... 1

30.6 (41.0)

146 (108)

57

383

66.7

3450

4500

1PH8133-2 7 G2 7 - ... 1

39.0 (52.3)

186 (137)

81

346

66.7

3800

4500

1PH8135-2 7 G2 7 - ... 1

44.4 (59.5)

212 (156)

85

371

66.7

3500

4500

1PH8137-2 7 G2 7 - ... 1

59.3 (79.5)

283 (209)

131

374

66.7

3900

4500

1PH8138-2 7 G2 7 - ... 1

132

28.5 (38.2)

109 (80.4)

57

359

83.3

4500

4500

1PH8131-2 7 L2 7 - ... 1

160

88.0 (118)

335 (247)

165

355

167.0

4000

4000

1PH8164-2 7 L2 7 - ... 1

102 (137)

390 (288)

188

380

167.0

3900

4000

1PH8166-2 7 L2 7 - ... 1

119 (160)

455 (336)

225

355

167.0

4000

4000

1PH8168-2 7 L2 7 - ... 1

132

160

5
2000

2500

132

Line voltage 400 V 3 AC, Active Line Module

1750

132

2800

112 (82.6)

40

377

58.3

3150

4500

1PH8131-2 7 F2 7 - ... 1

26.4 (35.4)

144 (106)

42

415

58.3

2450

4500

1PH8133-2 7 F2 7 - ... 1

34.1 (45.7)

186 (137)

56

415

58.3

2650

4500

1PH8135-2 7 F2 7 - ... 1

37.0 (49.6)

202 (149)

58

415

58.3

2350

4500

1PH8137-2 7 F2 7 - ... 1

52.4 (70.3)

286 (211)

118

366

58.3

3500

4500

1PH8138-2 7 F2 7 - ... 1

67.0 (89.9)

365 (269)

108

440

117.0

2400

4000

1PH8164-2 7 F2 7 - ... 1

85.0 (114)

460 (339)

143

410

117.0

2600

4000

1PH8166-2 7 F2 7 - ... 1

94.0 (126)

510 (376)

164

410

117.0

2600

4000

1PH8168-2 7 F2 7 - ... 1

34.9 (46.8)

145 (107)

57

415

76.7

3450

4500

1PH8133-2 7 G2 7 - ... 1

44.3 (59.4)

184 (136)

80

395

76.7

3800

4500

1PH8135-2 7 G2 7 - ... 1

50.5 (67.7)

210 (155)

84

424

76.7

3500

4500

1PH8137-2 7 G2 7 - ... 1

67.7 (90.8)

281 (207)

130

415

76.7

3900

4500

1PH8138-2 7 G2 7 - ... 1

132

31.7 (42.5)

108 (79.7)

56

400

93.3

4500

4500

1PH8131-2 7 L2 7 - ... 1

160

93.0 (125)

315 (232)

156

395

187.0

4000

4000

1PH8164-2 7 L2 7 - ... 1

109 (146)

375 (277)

177

420

187.0

3900

4000

1PH8166-2 7 L2 7 - ... 1

123 (165)

420 (310)

210

395

187.0

4000

4000

1PH8168-2 7 L2 7 - ... 1

160

2300

20.4 (27.4)

132

For versions, see

Order No. supplement
and options on page 5/54.

5/46

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Water cooling, IP65 degree of protection

Motor type
(repeated)

Static
torque

Static
current

Efficiency Moment
of inertia

M0

I0

Nm (lbf-ft)

Terminal
box

J
kgm2

Weight,
approx.

(lbf-in-s2)

kg (lb)

Type

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8131-2 . F 2...

115 (84.8)

41

0.946

0.0446 (0.39)

102 (225)

gk843

45

6SL312 7 -1TE24- 5AA3

1PH8133-2 . F 2...

155 (114)

43

0.947

0.0600 (0.53)

120 (265)

gk843

45

6SL312 7 -1TE24- 5AA3

1PH8135-2 . F 2...

196 (145)

59

0.950

0.0750 (0.66)

138 (304)

gk843

60

6SL312 7 -1TE26- 0AA3

1PH8137-2 . F 2...

226 (167)

60

0.951

0.0885 (0.78)

153 (337)

gk843

60

6SL312 7 -1TE26- 0AA3

1PH8138-2 . F 2...

290 (214)

1204)

0.958

0.0885 (0.78)

156 (344)

gk843

132

6SL312 7 -1TE31- 3AA3

1PH8164-2 . F 2...

440 (325)

118

0.940

0.1750 (1.55)

224 (494)

gk874

132

6SL312 7 -1TE31- 3AA3

1PH8166-2 . F 2...

550 (406)

159

0.940

0.2160 (1.91)

257 (567)

gk874

200

6SL312 7 -1TE32- 0AA3

1PH8168-2 . F 2...

620 (457)

179

0.940

0.2440 (2.16)

279 (615)

gk874

200

6SL312 7 -1TE32- 0AA3

1PH8133-2 . G 2...

155 (114)

61

0.950

0.0600 (0.53)

120 (265)

gk843

60

6SL312 7 -1TE26- 0AA3

1PH8135-2 . G 2...

196 (145)

854)

0.952

0.0750 (0.66)

138 (304)

gk843

85

6SL312 7 -1TE28- 5AA3

1PH8137-2 . G 2...

226 (167)

904)

0.954

0.0885 (0.78)

153 (337)

gk843

85

6SL312 7 -1TE28- 5AA3

1PH8138-2 . G 2...

290 (214)

1334)

0.960

0.0885 (0.78)

156 (344)

gk843

132

6SL312 7 -1TE31- 3AA3

1PH8131-2 . L 2...

115 (84.8)

60

0.948

0.0446 (0.39)

102 (225)

gk843

60

6SL312 7 -1TE26- 0AA3

1PH8164-2 . L 2...

440 (325)

205

0.955

0.1750 (1.55)

224 (494)

gk874

200

6SL312 7 -1TE32- 0AA3

1PH8166-2 . L 2...

550 (406)

240

0.955

0.2160 (1.91)

257 (567)

gk874

200

6SL312 7 -1TE32- 0AA3

1PH8168-2 . L 2...

520 (384)

240

0.955

0.2440 (2.16)

279 (615)

gk874

260

6SL3320-1TE32- 1AA3

1PH8131-2 . F 2...

115 (84.8)

41

0.947

0.0446 (0.39)

102 (225)

gk843

45

6SL312 7 -1TE24- 5AA3

1PH8133-2 . F 2...

155 (114)

43

0.948

0.0600 (0.53)

120 (265)

gk843

45

6SL312 7 -1TE24- 5AA3

1PH8135-2 . F 2...

196 (145)

59

0.951

0.0750 (0.66)

138 (304)

gk843

60

6SL312 7 -1TE26- 0AA3

1PH8137-2 . F 2...

226 (167)

60

0.952

0.0885 (0.78)

153 (337)

gk843

60

6SL312 7 -1TE26- 0AA3

1PH8138-2 . F 2...

290 (214)

1204)

0.959

0.0885 (0.78)

156 (344)

gk843

132

6SL312 7 -1TE31- 3AA3

1PH8164-2 . F 2...

440 (325)

118

0.943

0.1750 (1.55)

224 (494)

gk874

132

6SL312 7 -1TE31- 3AA3

1PH8166-2 . F 2...

550 (406)

159

0.943

0.2160 (1.91)

257 (567)

gk874

200

6SL312 7 -1TE32- 0AA3

1PH8168-2 . F 2...

620 (457)

179

0.943

0.2440 (2.16)

279 (615)

gk874

200

6SL312 7 -1TE32- 0AA3

1PH8133-2 . G 2...

155 (114)

61

0.951

0.0600 (0.53)

120 (265)

gk843

60

6SL312 7 -1TE26- 0AA3

1PH8135-2 . G 2...

196 (145)

854)

0.953

0.0750 (0.66)

138 (304)

gk843

85

6SL312 7 -1TE28- 5AA3

1PH8137-2 . G 2...

226 (167)

4)

90

0.956

0.0885 (0.78)

153 (337)

gk843

85

6SL312 7 -1TE28- 5AA3

1PH8138-2 . G 2...

290 (214)

1334)

0.961

0.0885 (0.78)

156 (344)

gk843

132

6SL312 7 -1TE31- 3AA3

1PH8131-2 . L 2...

115 (84.8)

60

0.949

0.0446 (0.39)

102 (225)

gk843

60

6SL312 7 -1TE26- 0AA3

1PH8164-2 . L 2...

440 (325)

205

0.959

0.1750 (1.55)

224 (494)

gk874

200

6SL312 7 -1TE32- 0AA3

1PH8166-2 . L 2...

550 (406)

240

0.959

0.2160 (1.91)

257 (567)

gk874

200

6SL312 7 -1TE32- 0AA3

1PH8167-2 . L 2...

520 (384)

240

0.959

0.2440 (2.16)

279 (615)

gk874

260

6SL3320-1TE32- 1AA3

Cooling:
Internal air cooling
External air cooling

1)
2)
3)
4)

0
1

nmax,Inv: Maximum permissible operating speed based on the induced voltage in the motor and the voltage strength of the Motor Module
(without protective circuit).
nmax: Maximum speed that must not be exceeded.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz.
Above approx. 85 A, connection type "Power connector top" is not possible (15th data position E to H).
Power connector is generally not possible with 1PH816.
Siemens PM 21 2011

5/47

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Water cooling, IP65 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed,
max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

nmax, Inv

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 synchronous
motor
Water cooling

Line voltage 480 V 3 AC, Smart/Basic/Active Line Module

2000

23.2 (31.1)

111 (81.9)

39

427

66.7

3150

4500

1PH8131-2 7 F2 7 - ... 1

29 (38.9)

139 (103)

41

449

66.7

2450

4500

1PH8133-2 7 F2 7 - ... 1

37.9 (50.8)

181 (134)

56

449

66.7

2650

4500

1PH8135-2 7 F2 7 - ... 1

40.6 (54.4)

194 (143)

57

449

66.7

2350

4500

1PH8137-2 7 F2 7 - ... 1

59.7 (80.1)

285 (210)

118

416

66.7

3500

4500

1PH8138-2 7 F2 7 - ... 1

70 (93.9)

330 (243)

105

500

133.0

2400

4000

1PH8164-2 7 F2 7 - ... 1

89 (119)

425 (314)

138

465

133.0

2600

4000

1PH8166-2 7 F2 7 - ... 1

100 (134)

480 (354)

157

465

133.0

2600

4000

1PH8168-2 7 F2 7 - ... 1

39.1 (52.4)

141 (104)

57

449

88.3

3450

4500

1PH8133-2 7 G2 7 - ... 1

50.5 (67.7)

182 (134)

79

452

88.3

3800

4500

1PH8135-2 7 G2 7 - ... 1

56.8 (76.2)

205 (151)

83

449

88.3

3500

4500

1PH8137-2 7 G2 7 - ... 1

76.3 (102)

275 (203)

130

449

88.3

3900

4500

1PH8138-2 7 G2 7 - ... 1

132

33.6 (45.1)

107 (78.9)

56

427

100.0

4500

4500

1PH8131-2 7 L2 7 - ... 1

160

96 (129

305 (225)

150

420

200.0

4000

4000

1PH8164-2 7 L2 7 - ... 1

110 (148)

350 (258)

169

450

200.0

3900

4000

1PH8166-2 7 L2 7 - ... 1

125 (168)

395 (291)

197

420

200.0

4000

4000

132

160

5
2650

3000

132

1PH8168-2 7 L2 7 - ... 1
For versions, see
Order No. supplement
and options on page 5/54.

5/48

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Water cooling, IP65 degree of protection

Motor type
(repeated)

Static
torque

Static
current

Efficiency Moment of
inertia

M0

I0

Nm (lbf-ft)

Terminal
box

J
kgm2

Weight,
approx.

(lbf-in-s2)

kg (lb)

Type

SINAMICS S120 Motor Module

Rated output
current3)
Irated

For additional versions

and components see
chapter SINAMICS S120
drive system

Order No.

1PH8131-2 . F 2...

115 (84.8)

41

0.948

0.0446 (0.39)

102 (225)

gk843

45

6SL312 7 -1TE24 - 5AA3

1PH8133-2 . F 2...

155 (114)

43

0.949

0.0600 (0.53)

120 (265)

gk843

45

6SL312 7 -1TE24 - 5AA3

1PH8135-2 . F 2...

196 (145)

59

0.952

0.0750 (0.66)

138 (304)

gk843

60

6SL312 7 -1TE26 - 0AA3

1PH8137-2 . F 2...

226 (167)

60

0.953

0.0885 (0.78)

153 (337)

gk843

60

6SL312 7 -1TE26 - 0AA3

1PH8138-2 . F 2...

290 (214)

1204)

0.960

0.0885 (0.78)

156 (344)

gk843

132

6SL312 7 -1TE31 - 3AA3

1PH8164-2 . F 2...

440 (325)

118

0.946

0.1750 (1.55)

224 (494)

gk874

132

6SL312 7 -1TE31 - 3AA3

1PH8166-2 . F 2...

550 (406)

159

0.946

0.2160 (1.91)

257 (567)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8168-2 . F 2...

620 (457)

179

0.946

0.2440 (2.16)

279 (615)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8133-2 . G 2...

155 (114)

61

0.952

0.0600 (0.53)

120 (265)

gk843

60

6SL312 7 -1TE26 - 0AA3

1PH8135-2 . G 2...

196 (145)

854)

0.954

0.0750 (0.66)

138 (304)

gk843

85

6SL312 7 -1TE28 - 5AA3

1PH8137-2 . G 2...

226 (167)

904)

0.958

0.0885 (0.78)

153 (337)

gk843

85

6SL312 7 -1TE28 - 5AA3

1PH8138-2 . G 2...

290 (214)

1334)

0.962

0.0885 (0.78)

156 (344)

gk843

132

6SL312 7 -1TE31 - 3AA3

1PH8131-2 . L 2...

115 (84.8)

60

0.950

0.0446 (0.39)

102 (225)

gk843

60

6SL312 7 -1TE26 - 0AA3

1PH8164-2 . L 2...

440 (325)

205

0.960

0.1750 (1.55)

224 (494)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8166-2 . L 2...

550 (406)

240

0.960

0.2160 (1.91)

257 (567)

gk874

200

6SL312 7 -1TE32 - 0AA3

1PH8168-2 . L 2...

520 (384)

240

0.960

0.2440 (2.16)

279 (615)

gk874

260

6SL3320-1TE32 - 1AA3

Cooling:
Internal air cooling
External air cooling

1)
2)
3)
4)

0
1

nmax,Inv: Maximum permissible operating speed based on the induced voltage in the motor and the voltage strength of the Motor Module
(without protective circuit).
nmax: Maximum speed that must not be exceeded.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz.
Above approx. 85 A, connection type "Power connector top" is not possible (15th data position E to H).
Power connector is generally not possible with 1PH816.
Siemens PM 21 2011

5/49

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Water cooling, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed,
max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

nmax, Inv

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 synchronous
motor
Water cooling

Line voltage 400 V 3 AC, Smart/Basic Line Module

700

180
225

1000

180
225

1500

180
225

2500

180
225

42 (56.3)

573 (423)

100

303

47

1450

3800

1PH8184-2 7 C2 7 - ... 1

58 (77.8)

791 (583)

142

295

47

1450

3800

1PH8186-2 7 C2 7 - ... 1

72 (96.6)

982 (724)

180

275

47

1450

3500

1PH8224-2 7 C2 7 - ... 1

95 (127)

1296 (956)

255

255

47

1550

3500

1PH8226-2 7 C2 7 - ... 1

121 (162)

1651 (1218)

305

270

47

1450

3500

1PH8228-2 7 C2 7 - ... 1

61 (82)

583 (430)

140

313

67

1950

3800

1PH8184-2 7 D2 7 - ... 1

80 (107)

764 (564)

190

300

67

2050

3800

1PH8186-2 7 D2 7 - ... 1

101 (135)

964 (711)

255

275

67

2050

3500

1PH8224-2 7 D2 7 - ... 1

135 (181)

1289 (951)

325

285

67

1950

3500

1PH8226-2 7 D2 7 - ... 1

169 (227)

1614 (1190)

395

290

67

1950

3500

1PH8228-2 7 D2 7 - ... 1

90 (121)

573 (423)

190

334

100

2700

3800

1PH8184-2 7 F2 7 - ... 1

119 (160)

758 (559)

275

305

100

2950

3800

1PH8186-2 7 F2 7 - ... 1

151 (202)

961 (709)

355

290

100

2900

3500

1PH8224-2 7 F2 7 - ... 1

201 (270)

1280 (944)

445

305

100

2700

3500

1PH8226-2 7 F2 7 - ... 1

251 (337)

1598 (1179)

590

285

100

2900

3500

1PH8228-2 7 F2 7 - ... 1

127 (170)

485 (358)

260

328

167

3800

3800

1PH8184-2 7 L2 7 - ... 1

168 (225)

642 (474)

370

305

167

3800

3800

1PH8186-2 7 L2 7 - ... 1

182 (244)

695 (513)

365

320

167

3500

3500

1PH8224-2 7 L2 7 - ... 1

228 (306)

871 (642)

400

360

167

3500

3500

1PH8226-2 7 L2 7 - ... 1

270 (362)

1031 (760)

570

300

167

3500

3500

1PH8228-2 7 L2 7 - ... 1

102

342

53

1450

3800

1PH8184-2 7 C2 7 - ... 1

Line voltage 400 V 3 AC, Active Line Module

800

1150

1750

180

48 (64.4)
66 (88.5)

788 (581)

142

335

53

1450

3800

1PH8186-2 7 C2 7 - ... 1

225

81 (109)

967 (713)

178

310

53

1450

3500

1PH8224-2 7 C2 7 - ... 1

108 (145)

1289 (951)

255

287

53

1550

3500

1PH8226-2 7 C2 7 - ... 1

138 (185)

1647 (1215)

305

315

53

1450

3500

1PH8228-2 7 C2 7 - ... 1

180

70 (93.9)

581 (429)

140

386

77

1950

3800

1PH8184-2 7 D2 7 - ... 1

92 (123)

764 (564)

190

345

77

2050

3800

1PH8186-2 7 D2 7 - ... 1

225

115 (154)

955 (704)

250

310

77

2050

3500

1PH8224-2 7 D2 7 - ... 1

155 (208)

1287 (949)

325

325

77

1950

3500

1PH8226-2 7 D2 7 - ... 1

194 (260)

1611 (1188)

395

330

77

1950

3500

1PH8228-2 7 D2 7 - ... 1

103 (138)

562 (415)

186

386

117

2700

3800

1PH8184-2 7 F2 7 - ... 1

138 (185)

753 (555)

275

355

117

2950

3800

1PH8186-2 7 F2 7 - ... 1

180
225

2900

573 (423)

180
225

175 (235)

955 (704)

355

335

117

2900

3500

1PH8224-2 7 F2 7 - ... 1

233 (312)

1271 (937)

440

355

117

2700

3500

1PH8226-2 7 F2 7 - ... 1

289 (388)

1577 (1163)

580

335

117

2900

3500

1PH8228-2 7 F2 7 - ... 1

140 (188)

461 (340)

250

375

193

3800

3800

1PH8184-2 7 L2 7 - ... 1

178 (239)

586 (432)

340

345

193

3800

3800

1PH8186-2 7 L2 7 - ... 1

191 (256)

629 (464)

335

370

193

3500

3500

1PH8224-2 7 L2 7 - ... 1

238 (319)

784 (578)

365

413

193

3500

3500

1PH8226-2 7 L2 7 - ... 1

283 (380)

932 (687)

520

345

193

3500

3500

1PH8228-2 7 L2 7 - ... 1
For versions, see
Order No. supplement
and options on page 5/56.

5/50

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Water cooling, IP55 degree of protection

Motor type
(repeated)

Static
torque

Static Efficiency Moment of

current
inertia

M0

I0

Nm (lbf-ft)

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

kgm2 (lbf-in-s2) kg (lb)

Type

Order No.

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system

1PH8184-2 . C 2...

590 (435)

103

0.919

0.457 (4.04)

330 (728)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8186-2 . C 2...

800 (590)

143

0.924

0.599 (5.30)

400 (882)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-2 . C 2...

1007 (743)

183

0.947

1.28 (11.3)

580 (1279)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8226-2 . C 2...

1330 (981)

260

0.952

1.66 (14.7)

700 (1544)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8228-2 . C 2...

1680 (1239)

306

0.955

2.02 (17.9)

810 (1786)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8184-2 . D 2...

600 (443)

143

0.937

0.457 (4.04)

330 (728)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-2 . D 2...

800 (590)

196

0.943

0.599 (5.30)

400 (882)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-2 . D 2...

1007 (743)

262

0.956

1.28 (11.3)

580 (1279)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8226-2 . D 2...

1330 (981)

330

0.960

1.66 (14.7)

700 (1544)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8228-2 . D 2...

1680 (1239)

408

0.962

2.02 (17.9)

810 (1786)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8184-2 . F 2...

600 (443)

196

0.951

0.457 (4.04)

330 (728)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-2 . F 2...

800 (590)

285

0.952

0.599 (5.30)

400 (882)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8224-2 . F 2...

1007 (743)

367

0.962

1.28 (11.3)

580 (1279)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8226-2 . F 2...

1330 (981)

454

0.965

1.66 (14.7)

700 (1544)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8228-2 . F 2...

1680 (1239)

612

0.964

2.02 (17.9)

810 (1786)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8184-2 . L 2...

530 (391)

278

0.957

0.457 (4.04)

330 (728)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8186-2 . L 2...

720 (531)

405

0.957

0.599 (5.30)

400 (882)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8224-2 . L 2...

885 (653)

460

0.961

1.28 (11.3)

580 (1279)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8226-2 . L 2...

1170 (863)

532

0.962

1.66 (14.7)

700 (1544)

1XB7700-P02

3804)

6SL3320-1TE33- 8AA3

1PH8228-2 . L 2...

1400 (1033)

762

0.963

2.02 (17.9)

810 (1786)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8184-2 . C 2...

590 (435)

103

0.926

0.457 (4.04)

330 (728)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8186-2 . C 2...

800 (590)

143

0.931

0.599 (5.30)

400 (882)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-2 . C 2...

1007 (743)

183

0.952

1.28 (11.3)

580 (1279)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8226-2 . C 2...

1330 (981)

260

0.956

1.66 (14.7)

700 (1544)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8228-2 . C 2...

1680 (1239)

306

0.958

2.02 (17.9)

810 (1786)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8184-2 . D 2...

600 (443)

143

0.942

0.457 (4.04)

330 (728)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-2 . D 2...

800 (590)

196

0.948

0.599 (5.30)

400 (882)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-2 . D 2...

1007 (743)

262

0.959

1.28 (11.3)

580 (1279)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8226-2 . D 2...

1330 (981)

330

0.962

1.66 (14.7)

700 (1544)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8228-2 . D 2...

1680 (1239)

408

0.964

2.02 (17.9)

810 (1786)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8184-2 . F 2...

600 (443)

196

0.954

0.457 (4.04)

330 (728)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-2 . F 2...

800 (590)

285

0.955

0.599 (5.30)

400 (882)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8224-2 . F 2...

1007 (743)

367

0.963

1.28 (11.3)

580 (1279)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8226-2 . F 2...

1330 (981)

454

0.965

1.66 (14.7)

700 (1544)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8228-2 . F 2...

1680 (1239)

612

0.965

2.02 (17.9)

810 (1786)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8184-2 . L 2...

530 (391)

278

0.956

0.457 (4.04)

330 (728)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8186-2 . L 2...

720 (531)

405

0.955

0.599 (5.30)

400 (882)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8224-2 . L 2...

885 (653)

460

0.958

1.28 (11.3)

580 (1279)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8226-2 . L 2...

1170 (863)

532

0.958

1.66 (14.7)

700 (1544)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8228-2 . L 2...

1400 (1033)

762

0.958

2.02 (17.9)

810 (1786)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1)
2)
3)
4)

nmax,Inv: Maximum permissible operating speed based on the induced voltage in the motor and the voltage strength of the Motor Module
(without protective circuit).
nmax: Maximum speed that must not be exceeded.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the motor rated current at 2.0 kHz.
Siemens PM 21 2011

5/51

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Water cooling, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Rated
frequency

Operating
speed,
max.1)

Speed,
max.2)

nrated

SH

Prated

Mrated

Irated

Urated

frated

nmax, Inv

nmax

kW (HP)

Nm (lbf-ft)

Hz

rpm

rpm

Order No.

rpm

1PH8 synchronous
motor
Water cooling

Line voltage 480 V 3 AC, Smart/Basic/Active Line Module

1000

180
225

1350

180
225

2000

180
225

3200

180
225

60 (80.5)

573 (423)

102

423

67

1450

3800

1PH8184-2 7 C2 7 - ... 1

82 (110)

783 (578)

140

415

67

1450

3800

1PH8186-2 7 C2 7 - ... 1

101 (135)

964 (711)

178

385

67

1450

3500

1PH8224-2 7 C2 7 - ... 1

134 (180)

1280 (944)

255

357

67

1550

3500

1PH8226-2 7 C2 7 - ... 1

172 (231)

1642 (1211)

300

390

67

1450

3500

1PH8228-2 7 C2 7 - ... 1

82 (110)

580 (428)

140

417

90

1950

3800

1PH8184-2 7 D2 7 - ... 1

107 (143)

757 (558)

190

400

90

2050

3800

1PH8186-2 7 D2 7 - ... 1

135 (181)

955 (704)

250

365

90

2050

3500

1PH8224-2 7 D2 7 - ... 1

180 (241)

1273 (939)

320

380

90

1950

3500

1PH8226-2 7 D2 7 - ... 1

226 (303)

1599 (1179)

395

395

90

1950

3500

1PH8228-2 7 D2 7 - ... 1

110 (148)

525 (387)

176

434

133

2700

3800

1PH8184-2 7 F2 7 - ... 1

154 (207)

735 (542)

265

400

133

2950

3800

1PH8186-2 7 F2 7 - ... 1

186 (249)

888 (655)

330

380

133

2900

3500

1PH8224-2 7 F2 7 - ... 1

248 (333)

1184 (873)

410

390

133

2700

3500

1PH8226-2 7 F2 7 - ... 1

310 (416)

1480 (1092)

550

380

133

2900

3500

1PH8228-2 7 F2 7 - ... 1

142 (190)

424 (313)

230

405

213

3800

3800

1PH8184-2 7 L2 7 - ... 1

183 (245)

546 (403)

315

375

213

3800

3800

1PH8186-2 7 L2 7 - ... 1

196 (263)

585 (431)

310

400

213

3500

3500

1PH8224-2 7 L2 7 - ... 1

245 (329)

731 (539)

340

460

213

3500

3500

1PH8226-2 7 L2 7 - ... 1

291 (390)

868 (640)

485

380

213

3500

3500

1PH8228-2 7 L2 7 - ... 1
For versions, see
Order No. supplement
and options on page 5/56.

5/52

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 synchronous motors
Water cooling, IP55 degree of protection

Motor type
(repeated)

Static
torque

Static
current

Efficiency

Moment of
inertia

M0

I0

Nm (lbf-ft)

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

kgm2 (lbf-in-s2) kg (lb)

Type

Order No.

Rated output For additional versions

current3)
and components see
chapter SINAMICS S120
Irated
drive system

1PH8184-2 . C 2...

590 (435)

103

0.937

0.457 (4.04)

330 (728)

1XB7322-P05

132

6SL3120-1TE31- 3AA3

1PH8186-2 . C 2...

800 (590)

143

0.941

0.599 (5.30)

400 (882)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-2 . C 2...

1007 (743)

183

0.957

1.28 (11.3)

580 (1279)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8226-2 . C 2...

1330 (981)

260

0.960

1.66 (14.7)

700 (1544)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8228-2 . C 2...

1680 (1239)

306

0.961

2.02 (17.9)

810 (1786)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8184-2 . D 2...

600 (443)

143

0.946

0.457 (4.04)

330 (728)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-2 . D 2...

800 (590)

196

0.952

0.599 (5.30)

400 (882)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8224-2 . D 2...

1007 (743)

262

0.961

1.28 (11.3)

580 (1279)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8226-2 . D 2...

1330 (981)

330

0.964

1.66 (14.7)

700 (1544)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8228-2 . D 2...

1680 (1239)

408

0.965

2.02 (17.9)

810 (1786)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8184-2 . F 2...

600 (443)

196

0.957

0.457 (4.04)

330 (728)

1XB7322-P05

200

6SL3120-1TE32- 0AA3

1PH8186-2 . F 2...

800 (590)

285

0.956

0.599 (5.30)

400 (882)

1XB7700-P02

310

6SL3320-1TE33- 1AA3

1PH8224-2 . F 2...

1007 (743)

367

0.964

1.28 (11.3)

580 (1279)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8226-2 . F 2...

1330 (981)

454

0.965

1.66 (14.7)

700 (1544)

1XB7700-P02

490

6SL3320-1TE35- 0AA3

1PH8228-2 . F 2...

1680 (1239)

612

0.964

2.02 (17.9)

810 (1786)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1PH8184-2 . L 2...

530 (391)

278

0.954

0.457 (4.04)

330 (728)

1XB7700-P02

260

6SL3320-1TE32- 6AA3

1PH8186-2 . L 2...

720 (531)

405

0.953

0.599 (5.30)

400 (882)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8224-2 . L 2...

885 (653)

460

0.954

1.28 (11.3)

580 (1279)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8226-2 . L 2...

1170 (863)

532

0.954

1.66 (14.7)

700 (1544)

1XB7700-P02

380

6SL3320-1TE33- 8AA3

1PH8228-2 . L 2...

1400 (1033)

762

0.954

2.02 (17.9)

810 (1786)

1XB7712-P03

745

6SL3320-1TE37- 5AA3

1)
2)
3)

nmax,Inv: Maximum permissible operating speed based on the induced voltage in the motor and the voltage strength of the Motor Module
(without protective circuit).
nmax: Maximum speed that must not be exceeded.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
Siemens PM 21 2011

5/53

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Order No. supplements for 1PH808/1PH810/1PH813/1PH816 motors

Data position of the Order No.

Shaft height 80

Shaft height 100

Shaft height 132

Shaft height 160

Overall length1)

9 10 11 12

13 14 15 16

. 1 Z

Asynchronous variant

Synchronous variant (1PH813/1PH816)

Encoder systems for motors without DRIVE-CLiQ interface

Without encoder2)

Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R)3)

Incremental encoder HTL 1024 S/R (encoder HTL1024S/R) 2)4)

Incremental encoder HTL 2048 S/R (encoder HTL2048S/R) 2)5)

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder

J
IC2048S/R)3)

Encoder systems for motors with DRIVE-CLiQ interface

Absolute encoder 22 bit (resolution 4194304, internal 2048 S/R) + 12 bit multi-turn
(traversing range 4096 revolutions) (encoder AM22DQ)3)

Incremental encoder 22 bit (resolution 4194304, internal 2048 S/R) + commutation position 11 bit
(encoder IC22DQ)3)

Rated speeds at 380 V to 480 V 3 AC (winding design)

400 rpm/500 rpm/600 rpm

1000 rpm/1150 rpm/1350 rpm

1500 rpm/1750 rpm/2000 rpm

2000 rpm/2300 rpm/2650 rpm

2500 rpm/2800 rpm/3000 rpm

3000 rpm/3300 rpm/3600 rpm

Cooling

Degree of protection

Forced ventilation
DE J NDE

IP55

Forced ventilation
NDE J DE

IP55

Water cooling

IP65

Type of construction
IM B3 (IM V5, IM V6)

IM B5 (IM V1, IM V3)

IM B35 ( IM V15, IM

V35)6)

3
For 13th to 15th data
position of the Order
No., see page 5/55.

1)
2)
3)
4)
5)
6)

Not selectable. Determined by the choice of rated power.

Only possible with 8th data position "1" (asynchronous variant).
Limited to nmax = 12000 rpm.
Limited to nmax = 9000 rpm.
Limited to nmax = 4600 rpm.
Only possible with 1PH810 to 1PH816.

5/54

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Order No. supplements for 1PH808/1PH810/1PH813/1PH816 motors (continued)

Data position of the Order No.

Shaft extension DE

Balancing

Plain shaft

Fitted key

Full-key

Fitted key

Half-key

Bearing

Vibration magnitude acc. to Shaft and

Siemens/EN 60034-142)
flange accuracy2)

Standard

R/A

Standard

S/A

Standard1)

SR/A

SPECIAL

Performance3)

SPECIAL/B

SPECIAL

Advanced lifetime4)

S/A

9 10 11 12

13 14 15 16

. 1 Z

Cable connection (view of DE)

Terminal box

Cable entry

Signal connection

Top

Right

DE

Top

Left

DE

Top

NDE

Left

Top

Right

DE

Top

Left

DE

Top

NDE

Left

Top

DE

Left

Power

connector5)

Version status

Special version (order codes are required for options, see page 5/60)

Ordering example
Selection criteria

Design

Structure of the order number

1PH8 motor

Synchronous variant, water cooling

Shaft height 132
version status 1

1PH8131- 2 . . 2. - . . . 1

Encoder system

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

1PH8131- 2M. 2. - . . . 1

Rated operating point

1500 rpm, 17.6 kW (23.6 HP), 112 Nm (82.6 lbf-ft)

1PH8131- 2MF2. - . . . 1

Type of construction

IM B3 (IM V5, IM V6)

1PH8131- 2MF20- . . . 1

Shaft extension DE

Plain shaft

1PH8131- 2MF20-0 . . 1

Bearing version

Standard
Vibration magnitude R/A
Shaft and flange accuracy R

1PH8131- 2MF20-0B. 1

Connection

Cable connection terminal box top

Cable entry on the right
Signal connection DE

1PH8131- 2MF20-0BA1

Options

1)
2)
3)

4)

5)

1PH8131- 2MF20-0BA1-Z
Additional PTC thermistor chain for alarm and tripping

1PH8131- 2MF20-0BA1-Z
A12

Special paint finish worldwide: sky blue, RAL 5015

1PH8131- 2MF20-0BA1-Z
A12+K23+X05

Only possible with 8th data position "1" (asynchronous variant).

For definition, see 1PH8 Configuration Manual
Only possible with 8th data position "1" (asynchronous variant),
1PH808: Limited to nmax = 15000 rpm
1PH810: Limited to nmax = 12000 rpm
1PH813: Limited to nmax = 10000 rpm
1PH816: Limited to nmax = 9000 rpm. Not possible with 12th data position "2" (IM B5)
Limited to nmax = 5000 rpm.
1PH813: Limited to nmax = 4500 rpm
1PH816: Limited to nmax = 4000 rpm.
With 1PH810, power connector is only possible up to a maximum static current of I0 = 36 A.
With 1PH813, power connector is only possible up to a maximum static current of I0= 85 A.
Not possible for 1PH816.
Siemens PM 21 2011

5/55

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Order No. supplements for 1PH818/1PH822/1PH828 motors

Data position of the Order No.

Shaft height 180

Shaft height 225

Shaft height 280

Overall length1)

9 10 11 12

13 14 15 16

. 1 Z

Asynchronous variant

Synchronous variant (1PH818/1PH822)

Encoder systems for motors without DRIVE-CLiQ interface

Without encoder2)

Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R)

Incremental encoder HTL 1024 S/R (encoder HTL1024S/R)2)

Incremental encoder HTL 2048 S/R (encoder HTL2048S/R)2)3)

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

Encoder systems for motors with DRIVE-CLiQ interface

Absolute encoder 22 bit (resolution 4194304, internal 2048 S/R) + 12 bit multi-turn
(traversing range 4096 revolutions) (encoder AM22DQ)

Incremental encoder 22 bit (resolution 4194304, internal 2048 S/R) + commutation position 11 bit
(encoder IC22DQ)

Rated speeds at 380 V to 480 V 3 AC (winding design)

400 rpm/500 rpm/600 rpm

700 rpm/800 rpm/1000 rpm

1000 rpm/1150 rpm/1350 rpm

1500 rpm/1750 rpm/2000 rpm

2500 rpm/2900 rpm/3200 (3400) rpm

Rated speeds at 690 V 3 AC (1PH828) (winding design)

400 rpm/500 rpm

700 rpm/800 rpm

1000 rpm/1150 rpm

1500 rpm/1750 rpm

Cooling

Degree of protection

Water cooling

IP55

Type of construction
1PH818

1PH822

IM B3 (IM B6, IM B7, IM B8, IM V6)

1PH828
IM B3 (IM V6)

IM V5

IM V5

IM V57)

IM B5 with A450
flange (IM V3)4)

IM B5 with A550
flange (IM V3)5)

IM B5 with A660
flange (IM V3)6)7)

IM B35 with A450 flange (IM V35)

IM B35 with A550

flange (IM V35)

IM B35 with A660

flange (IM V35)

IM V15 with A450 flange

IM V15 with A550

flange

IM V15 with A660

flange7)

5
For 13th to 15th data
position of the Order
No., see page 5/57.

1)
2)
3)
4)
5)
6)
7)

Not selectable. Determined by the choice of rated power.

Only possible with 8th data position "1" (asynchronous variant).
Limited to nmax = 4600 rpm.
Limited to nmax = 3000 rpm. Not possible with 14th data position "L" (bearing performance).
Limited to nmax = 2500 rpm. Not possible with 14th data position "L" (bearing performance).
Limited to nmax = 2000 rpm.
Only possible with 14th data position A or B (standard bearing).

5/56

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Order No. supplements for 1PH818/1PH822/1PH828 motors (continued)

Data position of the Order No.

Shaft extension DE

Balancing

Plain shaft

Fitted key

Full-key

Fitted key

Half-key

Bearing

Vibration magnitude acc. to Shaft and

Siemens/EN 60034-141)
flange accuracy1)

Standard

Standard

R/A

Increased radial forces

Increased radial forces

R/A

Standard

S/A

Standard2)

SR/A

Performance2)3)

SR/A

9 10 11 12

13 14 15 16

. 1 Z

Also possible with 1PH818 and 1PH822:

Cable connection (view of DE)

Terminal box

Cable entry

Signal connection

Top

Right

DE

Top

Left

DE

Top

NDE

Right

Top

DE

Right

Version status

Special version (order codes are required for options, see page 5/60)

Ordering example
Selection criteria

Design

Structure of the order number

1PH8 motor

Asynchronous variant, water cooling

Shaft height 180
Version status 1

1PH8184- 1 . . 2 .- . . . 1

Encoder system

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

1PH8184- 1M . 2 . - . . . 1

Rated operating point

1750 rpm, 82 kW (110 HP), 447 Nm (330 lbf-ft)

1PH8184- 1MF2 .- . . . 1

Type of construction

IM B3 (IM B6, IM B7, IM B8, IM V6)

1PH8184- 1MF20- . . . 1

Shaft extension DE

Plain shaft

1PH8184- 1MF20-0 . . 1

Bearing version

Standard
Vibration magnitude R/A
Shaft and flange accuracy R

1PH8184- 1MF20-0B. 1

Connection

Cable connection terminal box top

Cable entry on the right
Signal connection DE

1PH8184- 1MF20-0BA1

Options

1)
2)
3)

1PH8184- 1MF20-0BA1-Z
Additional PTC thermistor chain for alarm and tripping

1PH8184- 1MF20-0BA1-Z
A12

Special paint finish worldwide: sky blue, RAL 5015

1PH8184- 1MF20-0BA1-Z
A12+K23+X05

For definition, see 1PH8 Configuration Manual

Only possible with 8th data position "1" (asynchronous variant).
Only possible with 1PH818: Limited to nmax = 7500 rpm. Not possible with 12th data position "2" (IM B5 type of construction).
Only possible with 1PH822: Limited to nmax = 6000 rpm. Not possible with 12th data position "2" (IM B5 type of construction).
Siemens PM 21 2011

5/57

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Order No. supplements for 1PH835 motors

Data position of the Order No.

Shaft height 355

Overall length1)

7
.

9 10 11 12

13 14 15 16

. 0 Z

Asynchronous variant
Forced ventilation with noise value 77 dB2)

Encoder systems for motors without DRIVE-CLiQ interface

Without encoder

Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R)

Incremental encoder HTL 1024 S/R (encoder HTL1024S/R)

Incremental encoder HTL 2048 S/R (encoder HTL2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

Encoder systems for motors with DRIVE-CLiQ interface

Absolute encoder 22 bit (resolution 4194304, internal 2048 S/R) + 12 bit multi-turn
(traversing range 4096 revolutions) (encoder AM22DQ)

Incremental encoder 22 bit (resolution 4194304, internal 2048 S/R) + commutation position 11 bit
(encoder IC22DQ)

Prepared for mounting external encoder systems3)

Incremental encoder HTL1024 S/R with solid shaft
Mounting of incremental encoder POG 10 D 1024

Order code H56 required

Incremental encoder HTL1024 S/R with solid shaft

Incremental encoder POG 10 supplied by customer

Order code G80 required

Incremental encoder HTL1024 S/R with hollow shaft

Incremental encoder HOG 28 supplied by customer

Order code H75 required

Rated speeds at 400 V to 500 V 3 AC (winding design)

480 rpm/550 rpm/600 rpm

640 rpm/750 rpm/800 rpm

800 (830) rpm/900 rpm/1000 rpm

1080 rpm/1250 rpm/1350 rpm

Rated speeds at 690 V 3 AC (winding design)

550 rpm/600 rpm

750 rpm/800 rpm

900 rpm/1000 rpm

1250 rpm/1350 rpm

Cooling

Degree of protection

Forced ventilation

IP55

Forced ventilation

IP23 (open-circuit cooling)

Type of construction
IM B3

IM B35 with A800 flange

3
For 13th to 15th data
position of the Order
No., see page 5/59.

1)
2)
3)

Not selectable. Determined by the choice of rated power.

1PH835.-7 asynchronous motors with forced ventilation and noise value of 85 dB, see Catalog CR 1.
For more information on incremental encoders, see: www.baumerhuebner.com

5/58

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Order No. supplements for 1PH835 motors (continued)

Data position of the Order No.

9 10 11 12

13 14 15 16

. 0

Shaft extension DE

Balancing

Plain shaft

Fitted key

Full-key

Fitted key

Half-key

Bearing

Vibration magnitude acc. to Shaft and

Siemens/EN 60034-141)
flange accuracy1)

Standard

Standard

R/A

Increased radial forces

Increased radial forces

R/A

Cable connection (view of DE)

Terminal box

Cable entry

Signal connection External fan NDE with air inlet from NDE
air-flow direction NDE DE

NDE right

Bottom

NDE

NDE left

Bottom

NDE top

Right

DE top2)

Right

NDE
NDE
NDE

Top

Left (order code G00 required)

Top

Right (order code G02 required)

Left (order code G00 required)

Right (order code G02 required)

Top2)3)

Left (order code G00 required)2)

Right (order code G02

required)2)

X
X

Version status

Special version (additional order codes are required for options, see page 5/60)

Ordering example
Selection criteria

Design

Structure of the order number

1PH8 motor

Asynchronous variant, forced ventilation with noise value of 77 dB

Shaft height 355
IP55 degree of protection
Version status 0

1PH8350- 1 . .1 .- . . . 0

Encoder system

Incremental encoder 22 bit (resolution 4194304, internal 2048 S/R)

+ commutation position 11 bit (encoder IC22DQ)

1PH8350- 1D . 1 . - . . . 0

Rated operating point

1080 rpm, 270 kW (362 HP), 2388 Nm (1761 lbf-ft)

1PH8350- 1DF1 .- . . . 0

Type of construction

IM B3

1PH8350- 1DF10- . . . 0

Shaft extension DE

Plain shaft

1PH8350- 1DF10-0 . . 0

Bearing version

Standard
Vibration magnitude R/A
Shaft and flange accuracy R

1PH8350- 1DF10-0B. 0

Connection

Cable connection, terminal box NDE top

Cable entry on the right
Signal connection NDE
External fan NDE left with air inlet from NDE, air-flow direction NDE DE

1PH8350- 1DF10-0BW0-Z

Options

1)
2)
3)

G00

With air filter

1PH8350- 1DF10-0BW0-Z
G00+G14

Special paint finish worldwide: sky blue, RAL 5015

1PH8350- 1DF10-0BW0-Z
G00+G14+K23+X05

For definition, see 1PH8 Configuration Manual

Only possible with 12th data position "0" (IM B3).
Only possible for assignments with terminal box 1XB7712-P.
Siemens PM 21 2011

5/59

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Options

Order
code

Description

For use with motors

A12

Additional PTC thermistor chain for alarm and tripping

(only possible for version with terminal box)

A25

Additional KTY84 temperature sensor as reserve

connected to signal terminal strip
(only possible for version with terminal box)

Standard

Standard

G00

External fan NDE left

(possible if 15th data position is U, W or X)

G02

External fan NDE right

(possible if 15th data position is V, W or X)

G14

With air filter

G80

Mounting of a POG 10 incremental encoder supplied

by customer
(possible if 9th data position is K)

H56

Mounting of the POG 10 D 1024 incremental encoder

(possible if 9th data position is K)

H75

Mounting of an HOG 28 incremental encoder supplied

by customer
(possible if 9th data position is G)

K08

Encoder connector mounted opposite

K09

Terminal box or power connector NDE right

1PH808
1PH810
1PH813
1PH816

1PH818
1PH822
1PH828

1PH835

For 1PH810 only1)/

1PH813/1PH816

For 1PH810 only1)/

1PH813/1PH816

Terminal box NDE left, cable entry DE,

signal connection top (possible if 15th data position is A)

K16

Second shaft extension

(d l: 120 mm 210 mm (4.72 in 8.27 in))
(possible if 9th data position is A or G)

K18

Radial shaft sealing ring DE2)

K40

Regreasing system, DE and NDE

Only for
1PH818/1PH822

Standard

Terminal box NDE right, cable entry DE,

signal connection top (possible if 15th data position is A)
Terminal box or power connector NDE left

K10

Standard with
1PH828
K80

Axial pipe connection NDE

(only possible with forced ventilation)

K83

Rotation of terminal box by +90 degrees

(possible in combination with options K09 or K10)

4)

K84

Rotation of terminal box by -90 degrees

(possible in combination with options K09 or K10)

4)

K85

Rotation of terminal box by +180 degrees

(possible in combination with options K09 or K10)

K90

Version with flange size A400

(possible if 12th data position 2, 3 and 5)

Only for 1PH818

L00

Replace terminal box (standard) with the next largest

terminal box
Note dimension implications, see CAD CREATOR.

L27

NDE bearing in insulated version

Only for 1PH818

Standard

Standard with
1PH822/1PH828
Fan version in IP65 degree of protection3)

L74

1)
2)
3)
4)

Option available

Option not available

Not possible with 12th data position "2" (IM B5 type of construction).
Only appropriate if oil spray or oil vapor is occasionally deposited on the sealing ring.
Radial shaft sealing ring is not possible with: 14th data position E, F and L.
Regardless of the degree of protection, at high levels of atmospheric pollution, the fan must be cleaned.
Not possible for 1PH822 and 1XB7712-P03 terminal box.

5/60

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH8 asynchronous and synchronous motors

Options (continued)
Order
code

Description

For use with motors

P00

Undrilled cable entry plate

Not for
1XB7820-P00

P01

Cable entry plate 3 M63 1.5

Only for
1XB7700-P02
1XB7712-P03

Only for
1XB7712-P03

P02

Cable entry plate 3 M75 1.5

Only for
1XB7712-P03

Only for
1XB7712-P01
1XB7712-P03

P03

Cable entry plate 4 M75 1.5

Only for
1XB7712-P01

P04

Cable entry plate 4 M63 1.5

Only for
1XB7712-P03

Only for
1XB7712-P01
1XB7712-P03

V90

1PH7-compatible shaft extension

(d l: 42 mm 110 mm (1.65 in 4.33 in))
(note reduced radial forces)

Only for 1PH813

Paint finish: anthracite RAL 7016

Standard

Standard

Standard

X01

Paint finish: jet black, matt RAL 9005

X02

Paint finish: cream white RAL9001

X03

Paint finish: reseda green RAL 6011

X04

Paint finish: pebble gray RAL 7032

X05

Paint finish: sky blue RAL 5015

X06

Paint finish: light ivory RAL 1015

X08

Paint finish: white aluminum RAL 9006

K24

Primer

Pale green

Red brown

Red brown

K23

Special paint finish worldwide, primer and

paint finish: anthracite RAL 7016

K23+X..

Special paint finish worldwide, primer and other

paint finish can be selected from X01 to X08

1PH808
1PH810
1PH813
1PH816

Option available

Option not available

1PH818
1PH822
1PH828

1PH835

When ordering a motor with options, -Z should be added to the order number.

Siemens PM 21 2011

5/61

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Overview

Benefits
7
7
7
7
7
7
7
7
7
7
7
7

7
7

1PH7 motors, shaft heights 180 and 225

High power density with small motor dimensions

High degree of protection
Wide speed control ranges
Speed down to zero without reducing the torque
Ruggedness
Essentially maintenance-free
Bearings for high cantilever load
High rotational accuracy, even at the lowest speeds
Integrated encoder system to sense the motor speed,
connected using a connector or DRIVE-CLiQ interface
Terminal box to connect the power cable
Motor temperature monitoring with KTY84
Various types of cooling systems
Basic external cooling using a pipe connection
Optional bearing versions with re-lubrication device and
insulated bearings (NDE)

Application
Crane systems:
Hoisting and closing gears for cranes
Hoisting and traversing gears for high-bay racking vehicles
Printing industry:
Single and main drives for printing machines
Rubber, plastic, wire, and glass manufacturing:
Drives for extruders, calenders, rubber injection machines, foil
machines, fleece plants
Wire-drawing machines, cable-stranding machines, etc.
General applications such as coiler and winder drives.
The 1PH7 motors are suitable for installation in dry indoor areas
without corrosive atmospheres.
1PH7 motors, shaft height 280

The 1PH7 AC motors are compact, force-ventilated squirrelcage asynchronous motors with degree of protection IP55.
The motors are ventilated using a mounted external fan unit.
The motor can be ordered either with the air flow from the motor
drive end (DE) to the motor non-drive end (NDE) - or vice versa.
These motors have been designed specifically for use in conjunction with converters. Depending on the control requirements, the appropriate encoder systems are available for the
motors. These encoders are used to sense the motor speed and
indirect position.

5/62

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Technical specifications

Characteristic curves

1PH7 motor

Cooling
in accordance with EN 60034-6
(IEC 60034-6)

Temperature class155 (F) for a

coolant temperature
of up to 40 C (104F)

S6-40 %
Constant
torque
range

Forced ventilation
Prated

1PH718/1PH722
1PH728

Fan mounted axially at NDE

Fan mounted radially at NDE

Temperature monitoring

Temperature sensor KTY84 in the

stator winding

1PH728

1 additional KTY84 as reserve

Motor fan ratings

400 V 3 AC 50/60 Hz
480 V 3 AC 60 Hz

Type of construction
in accordance with EN 60034-7
(IEC 60034-7)

IM B3, IM B35

Degree of protection
in accordance with EN 60034-5
(IEC 60034-5)

IP55 (fan IP54)

Shaft extension on the

drive end in accordance with
DIN 748-3 (IEC 60072-1)

With fitted key, half-key/full-key

balancing

Shaft and flange accuracy in

accordance with DIN 42955
(IEC 60072-1)1)

Tolerance N/Tolerance R

S6-25 %
Voltage
limiting characteristic

S6-60 %
S1
Constant power range
(field weakening range)

G_D211_EN_00030b

Insulation of the stator winding

in accordance with EN 60034-1
(IEC 60034-1)

n2

nrated

Typical speed/power characteristic for 1PH7 motors

Vibration magnitude
in accordance with
Siemens/EN 60034-14
(IEC 60034-14)
1PH718/1PH722
1PH728

Grade R/A, grade S/A, grade SR/A

Grade A, grade R/A

Sound pressure level LpA (1 m)

in accordance with
EN ISO 1680, max.
Tolerance + 3 dB
External fan 50 Hz

Sound pressure level as a function

of air-flow direction

Connection

Connector for signals

(mating connector not supplied)
Terminal box for power

1PH718/1PH722
1PH728

Terminal box at top

Terminal box NDE right

Paint finish

Primed
Paint finish anthracite RAL 7016

1)

Shaft extension run-out, concentricity of centering ring and shaft and

perpendicularity of flange to shaft.
Siemens PM 21 2011

5/63

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Speed
during field
weakening1)

Continuous
speed,
max.2)

Speed,
max.3)

nrated

SH

Prated

Mrated

Irated

Urated

n2

nS1

nmax

kW (HP)

Nm (lbf-ft)

rpm

rpm

rpm

Order No.

rpm

1PH7 asynchronous motor

Forced ventilation

Line voltage 400 V 3 AC, Smart/Basic Line Module

400

180
225

1000

180
225

1500

180
225

2500

180
225

16.3 (21.9)

390 (288)

51

271

21004)

35005)4)

50004)

1PH7184- 7 7 B 7 7 - 7 .. .

21.2 (28.4)

505 (373)

67

268

24004)

35005)4)

50004)

1PH7186- 7 7 B 7 7 - 7 .. .

30.4 (40.8)

725 (535)

88

268

1900

31005)4)

45004)

1PH7224- 7 7 B 7 7 - 7 .. .

31005)4)

45004)

1PH7226- 7 7 B 7 7 - 7 .. .

39.2 (52.6)

935 (690)

114

264

22004)

48 (64.4)

1145 (845)

136

272

22004)

31005)4)

45005)4)

1PH7228- 7 7 B 7 7 - 7 .. .

39 (52.3)

372 (274)

90

335

3300

35005)

5000

1PH7184- 7 7 D 7 7 - 7 .. .

51 (68.4)

485 (358)

116

340

3700

35005)

5000

1PH7186- 7 7 D 7 7 - 7 .. .

71 (95.2)

678 (500)

161

335

2900

31005)

4500

1PH7224- 7 7 D 7 7 - 7 .. .

92 (123)

880 (649)

198

340

2900

31005)

4500

1PH7226- 7 7 D 7 7 - 7 .. .

45005)

1PH7228- 7 7 D 7 7 - 7 .. .

113 (152)

1080 (797)

240

340

2900

31005)

51 (68.4)

325 (240)

120

335

5000

35005)

5000

1PH7184- 7 7 F 7 7 - 7 .. .

74 (99.2)

471 (347)

170

330

5000

35005)

5000

1PH7186- 7 7 F 7 7 - 7 .. .

95 (127)

605 (446)

204

340

2900

31005)

4500

1PH7224- 7 7 U 7 7 - 7 .. .

130 (174)

828 (611)

278

340

2900

31005)

4500

1PH7226- 7 7 F 7 7 - 7 .. .

160 (215)

1019 (752)

350

340

2900

31005)

45005)

1PH7228- 7 7 F 7 7 - 7 .. .

78 (10.5)

298 (220)

171

340

5000

35005)

5000

1PH7184- 7 7 L 7 7 - 7 .. .

106 (142)

405 (299)

235

335

5000

35005)

5000

1PH7186- 7 7 L 7 7 - 7 .. .

142 (190)

542 (400)

298

340

3500

31005)

4500

1PH7224- 7 7 L 7 7 - 7 .. .

168 (225)

642 (438)

362

335

3500

31005)

4500

1PH7226- 7 7 L 7 7 - 7 .. .

205 (275)

783 (578)

433

340

3500

31005)

45005)

1PH7228- 7 7 L 7 7 - 7 .. .
For versions, see
Order No. supplement and
options on page 5/72.

5/64

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Rated
Moment
frequency of inertia

cos

rated

frated

Hz

kgm2

(lbf -in-s2)

Weight,
approx.

kg (lb)

Terminal
box

Type

SINAMICS S120 Motor Module

Rated output
current6)
Irated

For additional versions

and components see
chapter SINAMICS
S120 drive system

Order No.

1PH7184-..B...

0.84

26

0.830

14.2

0.503 (4.45)

370 (816)

1XB7322

60

6SL3120- 1TE26-0AA3

1PH7186-..B...

0.81

38.5

0.845

14.0

0.666 (5.89)

440 (970)

1XB7322

85

6SL3120- 11 TE28-5AA3

1PH7224-..B...

0.87

36.5

0.864

14.0

1.479 (13.1)

630 (1389)

1XB7322

857)

6SL3120- 1TE28-5AA3

1PH7226-..B...

0.86

49

0.880

14.0

1.930 (17.1)

750 (1654)

1XB7322

132

6SL3120- 1TE31-3AA3

1PH7228-..B...

0.85

60.5

0.888

13.9

2.326 (20.6)

860 (1896)

1XB7322

1327)

6SL3120- 1TE31-3AA3

1PH7184-..D... 0.83

44

0.913

34.2

0.503 (4.45)

370 (816)

1XB7322

857)

6SL3120- 1TE28-5AA3

1PH7186-..D... 0.81

58

0.918

34.1

0.666 (5.89)

440 (970)

1XB7322

132

6SL3120- 1TE31-3AA3

1PH7224-..D... 0.81

78.5

0.934

33.9

1.479 (13.1)

630 (1389)

1XB7322

200

6SL3120- 1TE32-0AA3

1PH7226-..D... 0.84

87.5

0.935

33.9

1.930 (17.1)

750 (1654)

1XB7422

200

6SL3120- 1TE32-0AA3

1PH7228-..D... 0.85

98

0.938

33.9

2.326 (20.6)

860 (1896)

1XB7700

260

6SL3320- 1TE32-6AA3

1PH7184-..F...

0.78

64

0.930

50.7

0.503 (4.45)

370 (816)

1XB7322

132

6SL3120- 1TE31-3AA3

1PH7186-..F...

0.81

84

0.937

50.7

0.666 (5.89)

440 (970)

1XB7422

200

6SL3120- 1TE32-0AA3

88.5

0.944

50.6

1.479 (13.1)

630 (1398)

1XB7422

2007)

6SL3120- 1TE32-0AA3

1PH7224-..U... 0.84
1PH7226-..F...

0.84

120

0.945

50.6

1.930 (17.1)

750 (1654)

1XB7700

310

6SL3320- 1TE33-1AA3

1PH7228-..F...

0.82

169

0.949

50.5

2.326 (20.6)

860 (1896)

1XB7700

380

6SL3320- 1TE33-8AA3

1PH7184-..L...

0.82

77

0.937

84.1

0.503 (4.45)

370 (816)

1XB7322

200

6SL3120- 1TE32-0AA3

1PH7186-..L...

0.82

108

0.942

84.1

0.666 (5.89)

440 (970)

1XB7422

260

6SL3320- 1TE32-6AA3

1PH7224-..L...

0.84

115

0.948

84.0

1.479 (13.1)

630 (1389)

1XB7700

310

6SL3320- 1TE33-1AA3

1PH7226-..L...

0.84

154

0.950

84.0

1.930 (17.1)

750 (1654)

1XB7700

380

6SL3320- 1TE33-8AA3

1PH7228-..L...

0.84

185

0.950

83.9

2.326 (20.6)

860 (1896)

1XB7700

490

6SL3320- 1TE35-0AA3

1)
2)
3)
4)
5)
6)
7)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nS1: Maximum permissible speed that is continuously permitted without speed duty cycles.
nmax: Maximum speed that must not be exceeded.
The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < 5 motor rated frequency.
Speed is reduced with increased radial forces, see selection guides.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the motor rated current.
Siemens PM 21 2011

5/65

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Speed
during field
weakening1)

Continuous
speed,
max.2)

Speed,
max.3)

nrated

SH

Prated

Mrated

Irated

Urated

n2

nS1

nmax

kW (HP)

Nm (lbf-ft)

rpm

rpm

rpm

Order No.

rpm

1PH7 asynchronous motor

Forced ventilation

Line voltage 400 V 3 AC, Active Line Module

400

180
225

16.3 (21.9)

390 (288)

51

271

29004)

35004)5)

50004)

1PH7184- 7 7 B 7 7 - 7 .. .

21.2 (28.4)

505 (373)

67

268

33004)

35004)5)

50004)

1PH7186- 7 7 B 7 7 - 7 .. .

30.4 (40.8)

725 (535)

88

268

27004)

31004)5)

45004)

1PH7224- 7 7 B 7 7 - 7 .. .

31004)5)

45004)

1PH7226- 7 7 B 7 7 - 7 .. .

935 (690)

114

264

29004)

48 (64.4)

1145 (845)

136

272

29004)

31004)5)

45004)5)

1PH7228- 7 7 B 7 7 - 7 .. .

80 (107)

1529 (1128)

144

400

1700

2200

33004)

1PH7284- 7 7 B 7 7 - 0 .. .

100 (134)

1909 (1408)

180

400

1800

2200

33004)

1PH7286- 7 7 B 7 7 - 0 .. .

130 (174)

2481 (1830)

233

400

1800

2200

33004)

1PH7288- 7 7 B 7 7 - 0 .. .

125 (168)

1492 (1101)

220

400

2200

2200

3300

1PH7284- 7 7 C 7 7 - 0 .. .

155 (208)

1850 (1365)

285

385

2200

2200

3300

1PH7286- 7 7 C 7 7 - 0 .. .

190 (255)

2268 (1673)

365

370

2200

2200

3300

1PH7288- 7 7 C 7 7 - 0 .. .

44 (59)

366 (270)

89

383

4200

35005)

5000

1PH7184- 7 7 D 7 7 - 7 .. .

58 (77.8)

482 (356)

116

390

4400

35005)

5000

1PH7186- 7 7 D 7 7 - 7 .. .

81 (109)

670 (494)

160

385

2900

31005)

4500

1PH7224- 7 7 D 7 7 - 7 .. .

105 (141)

870 (642)

197

390

2900

31005)

4500

1PH7226- 7 7 D 7 7 - 7 .. .

45005)

1PH7228- 7 7 D 7 7 - 7 .. .

39.2 (52.6)

500

800

1150

280

280

180
225

280

1750

180
225

280

2900

180
225

129 (173)

1070 (789)

238

390

2900

31005)

170 (228)

1414 (1043)

314

400

2200

2200

3300

1PH7284- 7 7 D 7 7 - 0 .. .

210 (282)

1745 (1287)

414

380

2200

2200

3300

1PH7286- 7 7 D 7 7 - 0 .. .

260 (349)

2160 (1593)

497

385

2200

2200

3300

1PH7288- 7 7 D 7 7 - 0 .. .

60 (80.5)

327 (241)

120

388

5000

35005)

5000

1PH7184- 7 7 F 7 7 - 7 .. .

85 (114)

465 (343)

169

385

5000

35005)

5000

1PH7186- 7 7 F 7 7 - 7 .. .

110 (148)

600 (443)

203

395

2900

31005)

4500

1PH7224- 7 7 U 7 7 - 7 .. .

135 (181)

737 (544)

254

395

2900

31005)

4500

1PH7226- 7 7 F 7 7 - 7 .. .

179 (240)

975 (719)

342

395

2900

31005)

45005)

1PH7228- 7 7 F 7 7 - 7 .. .

225 (302)

1228 (906)

393

400

2200

2200

3300

1PH7284- 7 7 F 7 7 - 0 .. .

270 (362)

1474 (1087)

466

400

2200

2200

3300

1PH7286- 7 7 F 7 7 - 0 .. .

340 (456)

1856 (1369)

586

400

2200

2200

3300

1PH7288- 7 7 F 7 7 - 0 .. .

81 (109)

265 (196)

158

395

5000

35005)

5000

1PH7184- 7 7 L 7 7 - 7 .. .

101 (135)

333 (246)

206

385

5000

35005)

5000

1PH7186- 7 7 L 7 7 - 7 .. .

149 (200)

490 (361)

274

395

3500

31005)

4500

1PH7224- 7 7 L 7 7 - 7 .. .

185 (248)

610 (450)

348

390

3500

31005)

4500

1PH7226- 7 7 L 7 7 - 7 .. .

215 (288)

708 (522)

402

395

3500

31005)

45005)

1PH7228- 7 7 L 7 7 - 7 .. .
For versions, see
Order No. supplement and
options on page 5/72.

5/66

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Rated
Moment
frequency of inertia

cos

rated

Weight,
approx.

frated

Hz

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current6)
and components
see chapter SINAMICS
Irated
S120 drive system
Order No.

1PH7184-..B...

0.84

26

0.830

14.2

0.503 (4.45)

370 (816)

1XB7322

60

6SL3120-1TE26-0AA3

1PH7186-..B...

0.81

38.5

0.845

14.0

0.666 (5.89)

440 (970)

1XB7322

85

6SL3120-1TE28-5AA3

1PH7224-..B...

0.87

36.5

0.864

14.0

1.479 (13.1)

630 (1389)

1XB7322

857)

6SL3120-1TE28-5AA3

1PH7226-..B...

0.86

49

0.880

14.0

1.930 (17.1)

750 (1654)

1XB7322

132

6SL3120-1TE31-3AA3

1PH7228-..B...

0.85

60.5

0.888

13.9

2.326 (20.6)

860 (1896)

1XB7322

1327)

6SL3120-1TE31-3AA3

1PH7284-..B...

0.87

60

0.922

17

4.2 (37.2)

1300 (2867)

1XB7712

200

6SL3120-1TE32-0AA3

1PH7286-..B...

0.86

78

0.930

17

5.2 (46)

1500 (3308)

1XB7712

200

6SL3120-1TE32-0AA3

1PH7288-..B...

0.87

100

0.933

17

6.3 (55.8)

1700 (3749)

1XB7712

260

6SL3320-1TE32-6AA3

1PH7284-..C...

0.86

95

0.944

27

4.2 (37.2)

1300 (2867)

1XB7712

260

6SL3320-1TE32-6AA3

1PH7286-..C...

0.85

135

0.948

27

5.2 (46)

1500 (3308)

1XB7712

310

6SL3320-1TE33-1AA3

1PH7288-..C...

0.84

170

0.951

27

6.3 (55.8)

1700 (3749)

1XB7712

380

6SL3320-1TE33-8AA3

1PH7184-..D...

0.82

42

0.920

39.2

0.503 (4.45)

370 (816)

1XB7322

1PH7186-..D...

0.81

58

0.925

39.1

0.666 (5.89)

440 (970)

1XB7322

132

6SL3120-1TE31-3AA3

1PH7224-..D...

0.81

79

0.938

38.9

1.479 (13.1)

630 (1389)

1XB7322

200

6SL3120-1TE32-0AA3

1PH7226-..D...

0.84

87.5

0.941

38.9

1.930 (17.1)

750 (1654)

1XB7422

200

6SL3120-1TE32-0AA3

857)

6SL3120-1TE28-5AA3

1PH7228-..D...

0.85

98

0.943

38.9

2.326 (20.6)

860 (1896)

1XB7700

260

6SL3320-1TE32-6AA3

1PH7284-..D...

0.82

158

0.956

38.6

4.2 (37.2)

1300 (2867)

1XB7712

3107)

6SL3320-1TE33-1AA3

1PH7286-..D...

0.81

218

0.958

38.6

5.2 (46)

1500 (3308)

1XB7712

490

6SL3320-1TE35-0AA3

1PH7288-..D...

0.82

252

0.960

38.6

6.3 (55.8)

1700 (3749)

1XB7712

4907)

6SL3320-1TE35-0AA3

1PH7184-..F...

0.78

64

0.934

59.0

0.503 (4.45)

370 (816)

1XB7322

132

6SL3120-1TE31-3AA3

1PH7186-..F...

0.80

84

0.940

59.0

0.666 (5.89)

440 (970)

1XB7422

200

6SL3120-1TE32-0AA3
6SL3120-1TE32-0AA3

1PH7224-..U...

0.84

88

0.944

58.9

1.479 (13.1)

630 (1389)

1XB7422

2007)

1PH7226-..F...

0.82

120

0.947

58.9

1.930 (17.1)

750 (1654)

1XB7700

260

6SL3320-1TE32-6AA3

1PH7228-..F...

0.81

169

0.948

58.8

2.326 (20.6)

860 (1896)

1XB7700

380

6SL3320-1TE33-8AA3

1PH7284-..F...

0.86

163

0.962

58.7

4.2 (37.2)

1300 (2867)

1XB7712

490

6SL3320-1TE35-0AA3

1PH7286-..F...

0.87

184

0.963

58.7

5.2 (46)

1500 (3308)

1XB7712

490

6SL3320-1TE35-0AA3

1PH7288-..F...

0.87

234

0.965

58.7

6.3 (55.8)

1700 (3749)

1XB7712

745

6SL3320-1TE37-5AA3

1PH7184-..L...

0.80

77

0.934

97.4

0.503 (4.45)

370 (816)

1XB7322

200

6SL3120-1TE32-0AA3

1PH7186-..L...

0.78

107

0.936

97.3

0.666 (5.89)

440 (970)

1XB7422

2007)

6SL3120-1TE32-0AA3

1PH7224-..L...

0.84

115

0.946

97.3

1.479 (13.1)

630 (1389)

1XB7700

310

6SL3320-1TE33-1AA3

1PH7226-..L...

0.83

154

0.946

97.2

1.930 (17.1)

750 (1654)

1XB7700

380

6SL3320-1TE33-8AA3

1PH7228-..L...

0.82

186

0.946

97.2

2.326 (20.6)

860 (1896)

1XB7700

490

6SL3320-1TE35-0AA3

1)
2)
3)
4)
5)
6)
7)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nS1: Maximum permissible speed that is continuously permitted without speed duty cycles.
nmax: Maximum speed that must not be exceeded.
The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < 5 motor rated frequency.
Speed is reduced with increased radial forces, see selection guides.
The rated pulse frequencies must be taken into account: The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the motor rated current.
Siemens PM 21 2011

5/67

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Speed
during field
weakening1)

Continuous
speed,
max.2)

Speed,
max.3)

nrated

SH

Prated

Mrated

Irated

Urated

n2

nS1

nmax

kW (HP)

Nm (lbf-ft)

rpm

rpm

rpm

Order No.

rpm

1PH7 asynchronous motor

Forced ventilation

Line voltage 480 V 3 AC, Smart/Basic/Active Line Module

500

180
225

600

1000

1350

280

280

180
225

280

2000

180
225

280

2900

180
225

20.5 (27.5)

392 (289)

51

335

32004)

35004)5)

50004)

1PH7184- 7 7 B 7 7 - 7 .. .

26.5 (35.5)

506 (373)

67

335

36004)

35004)5)

50004)

1PH7186- 7 7 B 7 7 - 7 .. .

38 (51.0)

725 (535)

86

335

29004)

31004)5)

45004)

1PH7224- 7 7 B 7 7 - 7 .. .

31004)5)

45004)

1PH7226- 7 7 B 7 7 - 7 .. .

49 (65.7)

935 (690)

112

330

32004)

60 (80.5)

1145 (845)

135

340

32004)

31004)5)

45004)5)

1PH7228- 7 7 B 7 7 - 7 .. .

95 (127)

1519 (1120)

144

480

2200

2200

33004)

1PH7284- 7 7 B 7 7 - 0 .. .

120 (161)

1916 (1413)

180

480

2200

2200

33004)

1PH7286- 7 7 B 7 7 - 0 .. .

155 (208)

2467 (1820)

233

480

2200

2200

33004)

1PH7288- 7 7 B 7 7 - 0 .. .

150 (201)

1433 (1057)

220

480

2200

2200

3300

1PH7284- 7 7 C 7 7 - 0 .. .

185 (248)

1767 (1303)

285

480

2200

2200

3300

1PH7286- 7 7 C 7 7 - 0 .. .

230 (308)

2197 (1621)

365

460

2200

2200

3300

1PH7288- 7 7 C 7 7 - 0 .. .

50 (67.1)

355 (262)

86

450

5000

35005)

5000

1PH7184- 7 7 D 7 7 - 7 .. .

67 (89.9)

475 (350)

114

460

5000

35005)

5000

1PH7186- 7 7 D 7 7 - 7 .. .

92 (123)

650 (479)

156

450

2900

31005)

4500

1PH7224- 7 7 D 7 7 - 7 .. .

120 (161)

847 (625)

193

460

2900

31005)

4500

1PH7226- 7 7 D 7 7 - 7 .. .

45005)

1PH7228- 7 7 D 7 7 - 7 .. .

147 (197)

1043 (769)

232

460

2900

31005)

200 (268)

1416 (1044)

314

470

2200

2200

3300

1PH7284- 7 7 D 7 7 - 0 .. .

245 (329)

1733 (1278)

414

445

2200

2200

3300

1PH7286- 7 7 D 7 7 - 0 .. .

305 (409)

2158 (1592)

497

450

2200

2200

3300

1PH7288- 7 7 D 7 7 - 0 .. .

68 (91.2)

325 (240)

120

450

5000

35005)

5000

1PH7184- 7 7 F 7 7 - 7 .. .

94 (126)

450 (332)

165

445

5000

35005)

5000

1PH7186- 7 7 F 7 7 - 7 .. .

124 (166)

590 (435)

200

460

2900

31005)

4500

1PH7224- 7 7 U 7 7 - 7 .. .

153 (205)

730 (538)

254

450

2900

31005)

4500

1PH7226- 7 7 F 7 7 - 7 .. .

196 (263)

936 (690)

332

450

3000

31005)

45005)

1PH7228- 7 7 F 7 7 - 7 .. .

255 (342)

1218 (898)

393

455

2200

2200

3300

1PH7284- 7 7 F 7 7 - 0 .. .

310 (416)

1481 (1092)

466

455

2200

2200

3300

1PH7286- 7 7 F 7 7 - 0 .. .

385 (516)

1838 (1356)

586

455

2200

2200

3300

1PH7288- 7 7 F 7 7 - 0 .. .

81 (109)

267 (197)

158

395

5000

35005)

5000

1PH7184- 7 7 L 7 7 - 7 .. .

101 (135)

333 (246)

206

385

5000

3500 5)

5000

1PH7186- 7 7 L 7 7 - 7 .. .

149 (200)

490 (361)

274

395

3500

31005)

4500

1PH7224- 7 7 L 7 7 - 7 .. .

185 (248)

610 (450)

348

390

3500

31005)

4500

1PH7226- 7 7 L 7 7 - 7 .. .

215 (288)

708 (522)

402

395

3500

31005)

45005)

1PH7228- 7 7 L 7 7 - 7 .. .
For versions, see
Order No. supplement and
options on page 5/72.

5/68

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Rated
Moment
frequency of inertia

cos

rated

Weight,
approx.

frated

Hz

kgm2 (lbf-in-s2) kg (lb)

Terminal
box

SINAMICS S120 Motor Module

Type

Rated output For additional versions

current6)
and components see
chapter SINAMICS
Irated
S120 drive system
Order No.

1PH7184-..B...

0.83

26

0.858

17.5

0.503 (4.45)

370 (816)

1XB7322

60

6SL3120-1TE26-0AA3

1PH7186-..B...

0.79

39.5

0.870

17.3

0.666 (5.89)

440 (970)

1XB7322

85

6SL3120-1TE28-5AA3

1PH7224-..B...

0.85

37.5

0.888

17.3

1.479 (13.1)

630 (1389)

1XB7322

857)

6SL3120-1TE28-5AA3

1PH7226-..B...

0.85

50

0.900

17.3

1.930 (17.1)

750 (1654)

1XB7322

132

6SL3120-1TE31-3AA3

1PH7228-..B...

0.84

61.5

0.907

17.2

2.326 (20.6)

860 (1896)

1XB7322

1327)

6SL3120-1TE31-3AA3

1PH7284-..B...

0.86

61

0.932

20.3

4.2 (37.2)

1300 (2867)

1XB7712

200

6SL3120-1TE32-0AA3

1PH7286-..B...

0.86

80

0.939

20.3

5.2 (46.0)

1500 (3308)

1XB7712

200

6SL3120-1TE32-0AA3

1PH7288-..B...

0.86

102

0.941

20.3

6.3 (55.8)

1700 (3749)

1XB7712

260

6SL3320-1TE32-6AA3

1PH7284-..C...

0.86

90

0.950

34

4.2 (37.2)

1300 (2867)

1XB7712

260

6SL3320-1TE32-6AA3

1PH7286-..C...

0.84

135

0.954

34

5.2 (46.0)

1500 (3308)

1XB7712

310

6SL3320-1TE33-1AA3

1PH7288-..C...

0.84

170

0.956

34

6.3 (55.8)

1700 (3749)

1XB7712

380

6SL3320-1TE33-8AA3

1PH7184-..D...

0.81

42

0.928

45.8

0.503 (4.45)

370 (816)

1XB7322

1PH7186-..D...

0.79

59.5

0.930

45.7

0.666 (5.89)

440 (970)

1XB7322

132

6SL3120-1TE31-3AA3

1PH7224-..D...

0.80

78.5

0.942

45.6

1.479 (13.1)

630 (1389)

1XB7322

200

6SL3120-1TE32-0AA3

1PH7226-..D...

0.82

88.5

0.945

45.6

1.930 (17.1)

750 (1654)

1XB7422

200

6SL3120-1TE32-0AA3

99.5

85 7)

6SL3120-1TE28-5AA3

1PH7228-..D...

0.84

0.947

45.6

2.326 (20.6)

860 (1896)

1XB7700

260

6SL3320-1TE32-6AA3

1PH7284-..D...

0.82

159

0.958

45.3

4.2 (37.2)

1300 (2867)

1XB7712

3107)

6SL3320-1TE33-1AA3

1PH7286-..D...

0.80

217

0.960

45.3

5.2 (46.0)

1500 (3308)

1XB7712

490

6SL3320-1TE35-0AA3

1PH7288-..D...

0.82

250

0.962

45.3

6.3 (55.8)

1700 (3749)

1XB7712

4907)

6SL3320-1TE35-0AA3

1PH7184-..F...

0.78

66

0.935

67.3

0.503 (4.45)

370 (816)

1XB7322

132

6SL3120-1TE31-3AA3

1PH7186-..F...

0.78

87

0.941

67.3

0.666 (5.89)

440 (970)

1XB7422

200

6SL3120-1TE32-0AA3

1PH7224-..U...

0.82

91

0.944

67.2

1.479 (13.1)

630 (1389)

1XB7422

200

6SL3120-1TE32-0AA3

1PH7226-..F...

0.82

119

0.948

67.2

1.930 (17.1)

750 (1654)

1XB7700

260

6SL3320-1TE32-6AA3

1PH7228-..F...

0.79

168

0.950

67.1

2.326 (20.6)

860 (1896)

1XB7700

380

6SL3320-1TE33-8AA3

1PH7284-..F...

0.86

162

0.962

67

4.2 (37.2)

1300 (2867)

1XB7712

490

6SL3320-1TE35-0AA3

1PH7286-..F...

0.87

182

0.964

67

5.2 (46.0)

1500 (3308)

1XB7712

490

6SL3320-1TE35-0AA3

1PH7288-..F...

0.87

232

0.965

67

6.3 (55.8)

1700 (3749)

1XB7712

745

6SL3320-1TE37-5AA3

1PH7184-..L...

0.80

77

0.934

97.4

0.503 (4.45)

370 (816)

1XB7322

200

6SL3120-1TE32-0AA3

1PH7186-..L...

0.78

107

0.936

97.3

0.666 (5.89)

440 (970)

1XB7422

210

6SL3320-1TE32-1AA3

1PH7224-..L...

0.84

115

0.946

97.3

1.479 (13.1)

630 (1389)

1XB7700

310

6SL3320-1TE33-1AA3

1PH7226-..L...

0.83

154

0.946

97.2

1.930 (17.1)

750 (1654)

1XB7700

380

6SL3320-1TE33-8AA3

1PH7228-..L...

0.82

188

0.954

97.2

2.326 (20.6)

860 (1896)

1XB7700

490

6SL3320-1TE35-0AA3

1)
2)
3)
4)
5)
6)
7)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nS1: Maximum permissible speed that is continuously permitted without speed duty cycles.
nmax: Maximum speed that must not be exceeded.
The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < 5 motor rated frequency.
Speed is reduced with increased radial forces, see selection guides.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the motor rated current.
Siemens PM 21 2011

5/69

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Speed
Continuous
during field speed,
weakening1) max. 2)

Speed,
max. 3)

nrated

SH

Prated

Mrated

Irated

Urated

n2

nS1

nmax

kW (HP)

Nm (lbf-ft)

rpm

rpm

rpm

Order No.

rpm

1PH7 asynchronous motor

Forced ventilation
Order
code

Line voltage 690 V 3 AC, Active Line Module

500

800

1150

1750

280

280

280

280

77 (103)

1471 (1085)

80

690

1700

2200

33004)

1PH7284- 7 7 B 7 7 - 0 ... -Z

C30

96 (128)

1834 (1353)

101

690

1800

2200

33004)

1PH7286- 7 7 B 7 7 - 0 ... -Z

C30

125 (168)

2388 (1761)

130

690

1900

2200

33004)

1PH7288- 7 7 B 7 7 - 0 ... -Z

C30

115 (154)

1373 (1013)

120

690

2200

2200

3300

1PH7284- 7 7 C 7 7 - 0 ... -Z

C30

145 (194)

1731 (1277)

160

665

2200

2200

3300

1PH7286- 7 7 C 7 7 - 0 ... -Z

C30

185 (248)

2208 (1629)

210

640

2200

2200

3300

1PH7288- 7 7 C 7 7 - 0 ... -Z

C30

164 (220)

1362 (1005)

176

690

2200

2200

3300

1PH7284- 7 7 D 7 7 - 0 ... -Z

C30

203 (272)

1686 (1244)

233

655

2200

2200

3300

1PH7286- 7 7 D 7 7 - 0 ... -Z

C30

251 (337)

2084 (1537)

280

665

2200

2200

3300

1PH7288- 7 7 D 7 7 - 0 ... -Z

C30

217 (291)

1184 (873)

221

690

2200

2200

3300

1PH7284- 7 7 F 7 7 - 0 ... .Z

C30

261 (350)

1424 (1050)

262

690

2200

2200

3300

1PH7286- 7 7 F 7 7 - 0 ... -Z

C30

329 (441)

1795 (1324)

330

690

2200

2200

3300

1PH7288- 7 7 F 7 7 - 0 ... -Z

C30

For versions, see Order No.

supplement and options on
page 5/74.

5/70

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Rated
Moment
frequency of inertia

cos

rated

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

frated

Hz

kgm2 (lbf-in-s2) kg (lb)

Type

Rated output For additional versions

current6)
and components
see chapter SINAMICS
Irated
S120 drive system
Order No.

857)

1PH7284-..B...

0.87

34

0.923

17

4.2 (37.2)

1300 (2867)

1XB7712

1PH7286-..B...

0.86

45

0.927

17

5.2 (46.0)

1500 (3308)

1XB7712

120

6SL3320-1TG31-2AA3

1PH7288-..B...

0.86

57

0.930

17

6.3 (55.8)

1700 (3749)

1XB7712

150

6SL3320-1TG31-5AA3

1PH7284-..C...

0.85

55

0.943

27

4.2 (37.2)

1300 (2867)

1XB7712

150

6SL3320-1TG31-5AA3

1PH7286-..C...

0.84

80

0.947

27

5.2 (46.0)

1500 (3308)

1XB7712

175

6SL3320-1TG31-8AA3

1PH7288-..C...

0.84

100

0.950

27

6.3 (55.8)

1700 (3749)

1XB7712

260

6SL3320-1TG32-6AA3

1PH7284-..D...

0.81

91

0.955

38.6

4.2 (37.2)

1300 (2867)

1XB7712

215

6SL3320-1TG32-2AA3

1PH7286-..D...

0.80

125

0.957

38.6

5.2 (46.0)

1500 (3308)

1XB7712

260

6SL3320-1TG32-6AA3

1PH7288-..D...

0.81

145

0.959

38.6

6.3 (55.8)

1700 (3749)

1XB7712

330

6SL3320-1TG33-3AA3

1PH7284-..F...

0.86

94

0.961

58.7

4.2 (37.2)

1300 (2867)

1XB7712

260

6SL3320-1TG32-6AA3

1PH7286-..F...

0.87

105

0.963

58.7

5.2 (46.0)

1500 (3308)

1XB7712

330

6SL3320-1TG33-3AA3

1PH7288-..F...

0.86

134

0.964

58.7

6.3 (55.8)

1700 (3749)

1XB7712

410

6SL3320-1TG34-1AA3

1)
2)
3)
4)
5)
6)
7)

6SL3320-1TG28-5AA3

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nS1: Maximum permissible speed that is continuously permitted without speed duty cycles.
nmax: Maximum speed that must not be exceeded.
The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < 5 motor rated frequency.
Speed is reduced with increased radial forces, see selection guides.
The rated pulse frequencies must be taken into account: The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2 kHz.
Siemens PM 21 2011

5/71

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Order No. supplements for 1PH718/1PH722 motors

Data position of the Order No.

Shaft height 180

Shaft height 225

Overall length1)

9 10 11 12

13 14 15 16

. Z

Fan
External fan, PG cable gland in terminal box

Without external fan, for pipe connection, PG cable gland in terminal box

External fan, metric cable gland in terminal box

Without external fan, for pipe connection, metric cable gland in terminal box

Encoder systems for motors without DRIVE-CLiQ interface

Without encoder

Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R)

Incremental encoder HTL 1024 S/R (encoder HTL1024S/R)

Incremental encoder HTL 2048 S/R (encoder HTL2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R without C and D tracks (encoder IN2048S/R)

Encoder systems for motors with DRIVE-CLiQ interface

Absolute encoder 22 bit (resolution 4194304, internal 2048 S/R) + 12 bit multi-turn
(traversing range 4096 revolutions) (encoder AM22DQ)

Incremental encoder 22 bit (resolution 4194304, internal 2048 S/R) + commutation position 11 bit
(encoder IC22DQ)

Incremental encoder 22 bit without commutation position (encoder IN22DQ)

Rated speeds at 380 V to 480 V 3 AC (winding design)

400 rpm/500 rpm

1000 rpm/1150 rpm/1350 rpm

1500 rpm/1750 rpm/2000 rpm

1500 rpm/1750 rpm/2000 rpm (for 1PH7224 only)

2500 rpm/2900 rpm

Cable connection (view of DE)

Terminal box
Cable entry
Top

Right

Top

DE

Top

NDE

Top

Left

Type of construction
IM B3

IM B3

Hoisting system for different types of construction (IM B6, IM B7, IM B8, IM V5, IM V6)

IM B35

1PH7184 with A400 flange

1PH7186 with A450 flange
1PH722 with A550 flange

IM B35

1PH7184 with A450 flange

IM B35

1PH7184 with A400 flange

1PH7186 with A450 flange
1PH722 with A550 flange
Hoisting concept for different types of construction (IM V15, IM V36)

IM B35

1PH7184 with A450 flange

Hoisting system for different types of construction (IM V15, IM V36)

6
For 13th to 16th data
position of the Order
No., see page 5/73.

1)

Not selectable. Determined by the choice of rated power.

5/72

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Order No. supplements for 1PH718/1PH722 motors (continued)

Data position of the Order No.

Shaft height 180

Shaft height 225

9 10 11 12

13 14 15 16

. Z

Holding brake with emergency stop function (suitable for coupling output in type of construction IM B3)1)
Without brake

With brake

With emergency release screws and microswitch

With brake

With manual release and microswitch

Bearing version

Vibration magnitude acc. to Shaft and

Siemens/EN 60034-142)
flange accuracy2)

Coupling

R/A

Coupling

R/A

Coupling

S/A

Coupling

SR/A

Belt

R/A

Belt

R/A

Increased cantilever forces

R/A

Increased cantilever forces

R/A

Increased maximum speed5)

S/A

Shaft extension DE

Balancing

Direction of air flow (fan)

Fitted key

Half-key

DE NDE

Fitted key

Half-key

NDE

Fitted key

Full-key

DE NDE

Fitted key

Full-key

NDE DE3)

Plain shaft

DE NDE

Plain shaft

NDE DE3)

Seal

Paint finish

Primed

Flange and shaft sealing ring4)

Primed

Anthracite RAL 7016

Flange and shaft sealing ring4)

Anthracite RAL 7016

Special paint finish in anthracite RAL 7016

Flange and shaft sealing ring4)

Special paint finish in anthracite RAL 7016

DE3)

Special version (order codes are required for options)

1)

2)
3)
4)
5)

Version with holding brake possible with:

12th data position 0
14th data position A
15th data position A or B
16th data position 0, 3 or 6
For definition see 1PH7 Configuration Manual.
Preferred direction of air flow in a polluted environment.
Only appropriate if oil spray or oil vapor is occasionally deposited on the sealing ring. A sealing ring is not possible for type of construction IM B3
(IM V5, IM V6) or version with increased maximum speed, version with belt or increased cantilever forces.
1PH718: nmax = 7000 rpm
1PH7224: nmax = 5500 rpm
Version possible for coupling output: 16th data position 0, 3 or 6.
Siemens PM 21 2011

5/73

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Order No. supplements for 1PH728 motors

Data position of the Order No.

Shaft height 280

Overall length1)

9 10 11 12

13 14 15 16

. 0

Fans2)

Mounting

Direction of air flow

External fan

NDE top

NDE J DE

External fan

NDE right

NDE J DE

External fan

NDE left

NDE J DE

External fan

DE top

DE J NDE

External fan

DE right

DE J NDE

External fan

DE left

DE J NDE

Without external fan

NDE right for single pipe connection

Encoder systems for motors without DRIVE-CLiQ interface

Without encoder

Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R)

Incremental encoder HTL 1024 S/R (encoder HTL1024S/R)

Incremental encoder HTL 2048 S/R (encoder HTL2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R without C and D tracks (encoder IN2048S/R)

Encoder systems for motors with DRIVE-CLiQ interface

Absolute encoder 22 bit (resolution 4194304, internal 2048 S/R) + 12 bit multi-turn
(traversing range 4096 revolutions) (encoder AM22DQ)

Incremental encoder 22 bit (resolution 4194304, internal 2048 S/R) + commutation position 11 bit
(encoder IC22DQ)

Incremental encoder 22 bit without commutation position (encoder IN22DQ)

Rated speeds at 380 V to 480 V 3 AC (winding design)

500 rpm/600 rpm

800 rpm/1000 rpm

1150 rpm/1350 rpm

1750 rpm/2000 rpm

Rated speeds at 690 V 3 AC (winding design)

500 rpm

Order code C30 required

800 rpm

Order code C30 required

1150 rpm

Order code C30 required

1750 rpm

Order code C30 required

Cable connection (view of DE)

Terminal box
Cable entry

Signal connection

NDE right

Bottom

DE

NDE left

Bottom

DE

NDE top

Right

DE

DE top

Right

NDE

5
For 12th to 16th data position
of the Order No., see
page 5/75.

1)
2)

Not selectable. Determined by the choice of rated power.

See selection guides.

5/74

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Order No. supplements for 1PH728 motors (continued)

Data position of the Order No.

Shaft height 280

9 10 11 12

13 14 15 16

. 0 Z

Type of construction1)
IM B3

IM V5

Can be subsequently modified to IM V6.

IM B35

With A660 flange

IM V15

With A660 flange

Can be subsequently modified to IM V35.

Bearing version

Vibration magnitude acc. to Shaft and

Siemens/EN 60034-142)
flange accuracy2)

Coupling

Coupling

R/A

Increased cantilever forces

Increased cantilever forces

R/A

Shaft extension DE

Balancing

Fitted key

Half-key

Fitted key

Full-key

Plain shaft

Paint finish
Primed

Anthracite RAL 7016

Special paint finish in anthracite RAL 7016

Special version (order codes are required for options)

1)
2)

See technical definitions for AC motors in chapter Servomotors.

For definition, see 1PH7 Configuration Manual
Siemens PM 21 2011

5/75

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Order No. supplements for 1PH728/1PL628 motors

Permissible combinations of mechanical variants External fan, terminal box, type of construction and drive type
1PH728/1PL628 motors
Shaft height 280

Permissible combinations of mechanical designs

Data position of
Order No. 8. 9. 10. 11. 12. 13. 14. 15. 16.
1PH728 . - 7 . . 7 7 - . 7 . .
1PL628 . - 7 . . 7 7 - . 7 . .

External fan
8th data position of the Order No.
1PH728 . - 7 . . . . - . . . .
1PL628 . - 7 . . . . - . . . .
Order No. supplement
0
NDE
top
NDE
DE

1
NDE
right
NDE
DE

2
NDE
left
NDE
DE

DE
top
DE
NDE

DE
right
DE
NDE

DE
left
DE
NDE

1P . . 28 . - . . . . 0 - . . . . Type of construction IM B3
1PL628 . - . . . . 0 - . . . .

1PH728 . - . . . . 1 - . . . . Type of construction IM V5

1PL628 . - . . . . 1 - . . . . (can be modified
subsequently to IM V6)

1PH728 . - . . . . 3 - . . . . Type of construction IM B35

1PL628 . - . . . . 3 - . . . .

1PH728 . - . . . . 5 - . . . . Type IM V15

1PL628 . - . . . . 5 - . . . . (can be modified
subsequently to IM V35)

Order codes for options

G14 With air filter
K08 Encoder connector mounted opposite
K55 Cable entry plate, terminal box, customer-specific1)
K83 Terminal box rotated through +90 degrees
K84 Terminal box rotated through -90 degrees
K85 Terminal box rotated through 180 degrees
K16 Second standard shaft extension
(only possible without encoder)
Y55 Non-standard shaft extension DE
M83 Additional thread for a setting screw on motor feet
Standard design
Released supplementary versions

1)

Plain text is required.

5/76

Siemens PM 21 2011

6
Single pipe
connection
NDE right
(can be modified
subsequently
to NDE left)

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Terminal box
11th data position of the Order No.
1PH728 . - . . . 7 . - . . . .
1PL628 . - . . . 7 . - . . . .

Type of construction
12th data position of the Order No.
1PH728 . - . . . . 7 - . . . .
1PL628 . - . . . . 7 - . . . .

Order No. supplement

0

NDE
right
Cable entry at
bottom, encoder connector DE

NDE
left
Cable entry at
bottom, encoder connector DE

Drive type
14th data position in Order No.
1PH728 . - . . . . . - . 7 . .
1PL628 . - . . . . . - . 7 . .

Order No. supplement

2
NDE
top
Cable entry
on right, encoder connector DE

5
DE
top
Cable entry
on right, encoder connector NDE

Order No. supplement

Type of
construction
IM B3

Type of
construction
IM V5
(IM V6)

Type of
construction
IM B35

Type of
construction
IM V15
(IM V35)

Coupling Coupling Belt/

N/N
R/R
Increased
radial
force
N/N

F
Belt/
Increased
radial
force
R/R

Siemens PM 21 2011

5/77

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Options

Order
code

Description

For use with motors

C30

Winding version 690 V 3 AC

G14

Fan unit with air filter

G80

Prepared for mounting an incremental encoder POG 10

K08

Signal connector mounted opposite

K16

Second standard shaft extension (only possible without encoder)

K31

2nd rating plate supplied separately in terminal box

K40

Re-lubrication device DE and NDE

(not possible with bearings for increased maximum speed)

Standard

K45

230 V AC standstill heating

K55

Cable entry plate, terminal box, customer-specific1)

K83

Terminal box rotated through +90 degrees

K84

Terminal box rotated through -90 degrees

K85

Terminal box rotated through 180 degrees

L27

NDE bearing in insulated version

Only for 1PH718

Standard

1PH718
1PH722

1PH728

Standard with
1PH722
M39

Version for zone 22 hazardous areas in accordance with EN 502812)

M83

Additional thread for a setting screw on motor feet

Y55

Non-standard shaft extension DE

On request

On request

Y80

Different rating plate data1)

On request

On request

Y82

Additional rating plate with customer data1)

On request

On request

Standard

Standard

Primer or paint finish in anthracite RAL 7016

color3)

R1Y

Paint finish in other RAL

R2Y

Special finish in other RAL color3)

Option available
Option not available

When ordering a motor with options, -Z should be added to the order number.

1)
2)
3)

Plain text is required in addition to order code.

The general conditions and information in the declaration of conformity must be taken into account.. Declarations of conformity are available on
request from your local Siemens sales office.
RAL color number must be specified in addition to order code.

5/78

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PH7 asynchronous motors
Forced ventilation, IP55 degree of protection

Options (continued)
Ordering example
Selection criteria

Design

Structure of the order number

1PH7 motor

Shaft height 180

1PH7184-. . . . . - . . . .

Fan

External fan, PG cable gland in terminal box

1PH7184- 2. . . . - . . . .

Encoder system

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

1PH7184- 2M . . .- . . . .

Rated operating point

2900 rpm, 81 kW (109 HP), 265 Nm (196 lbf-ft)

1PH7184-2ML. . - . . . .

Cable connection

Terminal box at top,

cable entry NDE

1PH7184-2ML2. - . . . .

Type of construction

IM B3

1PH7184-2ML20- . . . .

Brake

Without holding brake

1PH7184-2ML20-0 . . .

Bearing version

Coupling
Vibration magnitude R/A
Shaft and flange accuracy R

1PH7184- 2ML20-0B. .

Shaft extension DE
Balancing
Air direction

Fitted key
Half-key
DE NDE

1PH7184-2ML20-0BA.

Paint finish

Primed

1PH7184-2ML20-0BA0

Fan unit with air filter

1PH7184-2ML20-0BA0-Z
G14

Paint finish in other RAL color

pearl white

1PH7184-2ML20-0BA0-Z
G14+R1Y
RAL1013

Options

1PH7184-2ML20-0BA0-Z

Siemens PM 21 2011

5/79

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Overview

Benefits
7

7
7
7
7
7
7
7
7
7

7
7

1PL6 motors, shaft heights 180 to 225

Extremely high power density with small motor dimensions

(50 to 60 % higher output as compared to 1PH7 in degree of
protection IP55)
Speed down to zero without reducing the torque
Ruggedness
Essentially maintenance-free
Bearings for high cantilever load
High rotational accuracy, even at the lowest speeds
Integrated encoder system to sense the motor speed,
connected using a connector or DRIVE-CLiQ interface
Terminal box to connect the power cables
Motor temperature monitoring with KTY84
Various types of cooling systems
Basic external cooling using a pipe connection
Optional bearing versions with re-lubrication device and
insulated bearings (NDE)

Application
Crane systems:
Hoisting and closing gears for cranes
Printing industry:
Main drives for printing machines
Manufacture of rubber, plastic and wire:
Drives for extruders, calenders, rubber injection machines,
foil machines, fleece plants
Wire-drawing machines, cable-stranding machines, etc.
General applications such as coiler and winder drives.
The 1PL6 motors are suitable for installation in dry indoor areas
without corrosive atmospheres.

1PL6 motors, shaft height 280

The 1PL6 AC motors are compact, force-ventilated or enclosedventilated squirrel-cage asynchronous motors with degree of
protection IP23. The motors are ventilated using a mounted
external fan unit.
The motor can be ordered either with the air flow from the motor
drive end (DE) to the motor non-drive end (NDE) - or vice versa.
Depending on the control requirements, the appropriate encoder systems are available for the motors. These encoders are
used to sense the motor speed and indirect position.
The motors comply with DIN standards and have degree of
protection IP23 in accordance with EN 60034-5 (IEC 60034-5).

5/80

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Technical specifications

Characteristic curves

1PL6 motor
Insulation of the stator winding Temperature class 155 (F)
in accordance with EN 60034-1 for a coolant temperature
of up to 40 C (104F)
(IEC 60034-1)

S6-40 %

Prated

Forced ventilation and enclosed

ventilation
Fan mounted axially at NDE
Forced ventilation, the fan is
mounted radially at the NDE

Temperature monitoring

Temperature sensor KTY84 in the

stator winding

1PL628

1 additional KTY84 as reserve

Motor fan ratings

400 V 3 AC 50/60 Hz
480 V 3 AC 60 Hz

Type of construction
IM B3, IM B35
in accordance with EN 60034-7
(IEC 60034-7)

Voltage
limiting characteristic

S6-60 %
S1
Constant power range
(field weakening range)

G_D211_EN_00030b

1PL628

S6-25 %

Constant
torque
range

Cooling
in accordance with EN 60034-6
(IEC 60034-6)
1PL618/1PL622

n2

nrated

Typical speed/power characteristic for 1PL6 motors

Degree of protection
IP23
in accordance with EN 60034-5
(IEC 60034-5)
Shaft extension on the drive end With fitted key, half-key/full-key
balancing
in accordance with DIN 748-3
(IEC 60072-1)
Shaft and flange accuracy
in accordance with DIN 42955
(IEC 60072-1)1)

Tolerance N/Tolerance R

Vibration magnitude
in accordance with
Siemens/EN 60034-14
(IEC 60034-14)
1PL618/1PL622
1PL628

Grade R/A, grade S/A, grade SR/A

Grade A, grade R/A

Sound pressure level LpA (1 m) Sound pressure level as a function

in accordance with
of the air-flow direction
EN ISO 1680, max.
Tolerance + 3 dB
Connection

Connector for signals (mating connector not supplied)

Terminal box for power

1PL618/1PL622
1PL628

Terminal box at top

terminal box NDE right

Paint finish

Primed
anthracite RAL 7016

1)

Shaft extension run-out, concentricity of centering ring and shaft and

perpendicularity of flange to shaft.
Siemens PM 21 2011

5/81

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Speed
during field
weakening1)

Continuous
speed,
max.2)

Speed,
max.3)

nrated

SH

Prated

Mrated

Irated

Urated

n2

nS1

nmax

kW (HP)

Nm (lbf-ft)

rpm

rpm

rpm

Order No.

rpm

1PL6 asynchronous motor

Forced ventilation

Line voltage 400 V 3 AC, Smart/Basic Line Module

400

180
225

1000

180
225

1500

180
225

2500

180
225

20.5 (27.5)

489 (361)

58

290

1500

35004)5)

50005)

1PL6184- 7 7 B 7 7 - 0 .. .

30.5 (40.9)

728 (537)

87

290

1600

35004)5)

50005)

1PL6186- 7 7 B 7 7 - 0 .. .

40 (53.6)

955 (704)

105

296

1400

31004)5)

45005)

1PL6224- 7 7 B 7 7 - 0 .. .

45005)

1PL6226- 7 7 B 7 7 - 0 .. .

57 (76.4)

1361 (1004)

145

305

1400

31004)5)

72 (96.6)

1719 (1268)

181

305

1300

31004)5)

45004)5)

1PL6228- 7 7 B 7 7 - 0 .. .

57 (76.4)

544 (401)

122

345

2100

35004)

5000

1PL6184- 7 7 D 7 7 - 0 .. .

74 (99.2)

707 (522)

157

345

2400

35004)

5000

1PL6186- 7 7 D 7 7 - 0 .. .

105 (141)

1003 (740)

220

345

2500

31004)

4500

1PL6224- 7 7 D 7 7 - 0 .. .

135 (181)

1289 (951)

278

345

2200

31004)

4500

1PL6226- 7 7 D 7 7 - 0 .. .

45004)

1PL6228- 7 7 D 7 7 - 0 .. .

165 (221)

1576 (1163)

331

348

2200

31004)

76 (102)

484 (357)

165

345

4000

35004)

5000

1PL6184- 7 7 F 7 7 - 0 .. .

108 (145)

688 (508)

233

340

4000

35004)

5000

1PL6186- 7 7 F 7 7 - 0 .. .

142 (190)

904 (667)

292

345

2900

31004)

4500

1PL6224- 7 7 F 7 7 - 0 .. .

175 (235)

1114 (822)

356

345

2900

31004)

4500

1PL6226- 7 7 F 7 7 - 0 .. .

230 (308)

1465 (1081)

468

345

2900

31004)

45004)

1PL6228- 7 7 F 7 7 - 0 .. .

100 (134)

382 (282)

208

345

5000

35004)

5000

1PL6184- 7 7 L 7 7 - 0 .. .

130 (174)

497 (367)

275

340

5000

35004)

5000

1PL6186- 7 7 L 7 7 - 0 .. .

178 (239)

680 (502)

358

345

3500

31004)

4500

1PL6224- 7 7 L 7 7 - 0 .. .

235 (315)

698 (515)

476

340

3500

31004)

4500

1PL6226- 7 7 L 7 7 - 0 .. .

265 (355)

1013 (747)

535

345

3500

31004)

45004)

1PL6228- 7 7 L 7 7 - 0 .. .
For versions, see
Order No. supplement and
options on page 5/90.

5/82

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Rated
Moment
frequency of inertia

cos

rated

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

frated

Hz

kgm2 (lbf-in-s2) kg (lb)

Type

Rated output For additional versions

current6)
and components
see chapter SINAMICS
Irated
S120 drive system
Order No.

1PL6184-..B...

0.84

33.4

0.820

14.2

0.503 (4.45)

370 (816)

1XB7322

60

6SL3120-1TE26-0AA3

1PL6186-..B...

0.84

48.6

0.828

14.1

0.666 (5.89)

440 (970)

1XB7322

85 7)

6SL3120-1TE28-5AA3

1PL6224-..B...

0.86

45.8

0.864

14

1.479 (13.1)

630 (1389)

1XB7322

132

6SL3120-1TE31-3AA3

1PL6226-..B...

0.85

67

0.868

14

1.930 (17.1)

750 (1654)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6228-..B...

0.86

77

0.871

14.1

2.326 (20.6)

860 (1896)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6184-..D...

0.87

45

0.897

34.4

0.503 (4.45)

370 (816)

1XB7322

132

6SL3120-1TE31-3AA3

1PL6186-..D...

0.86

61

0.907

34.3

0.666 (5.89)

440 (970)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6224-..D...

0.86

86

0.927

34.5

1.479 (13.1)

630 (1389)

1XB7422

2107)

6SL3320-1TE32-1AA3

1PL6226-..D...

0.88

90

0.927

31.1

1.930 (17.1)

750 (1654)

1XB7700

310

6SL3320-1TE33-1AA3

1PL6228-..D...

0.89

103

0.928

34.2

2.326 (20.6)

860 (1896)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6184-..F...

0.84

70

0.924

50.9

0.503 (4.45)

370 (816)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6186-..F...

0.85

91

0.930

50.9

0.666 (5.89)

440 (970)

1XB7422

260

6SL3320-1TE32-1AA3

1PL6224-..F...

0.87

91

0.940

50.9

1.479 (13.1)

630 (1389)

1XB7700

310

6SL3320-1TE33-1AA3

1PL6226-..F...

0.87

125

0.944

50.7

1.930 (17.1)

750 (1654)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6228-..F...

0.86

177

0.947

50.7

2.326 (20.6)

860 (1896)

1XB7700

490

6SL3320-1TE35-0AA3

1PL6184-..L...

0.86

80

0.936

84.2

0.503 (4.45)

370 (816)

1XB7422

210

6SL3320-1TE32-1AA3

1PL6186-..L...

0.85

113

0.943

84.1

0.666 (5.89)

440 (970)

1XB7700

310

6SL3320-1TE33-1AA3

1PL6224-..L...

0.87

119

0.950

84.1

1.479 (13.1)

630 (1389)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6226-..L...

0.88

157

0.953

84

1.930 (17.1)

750 (1654)

1XB7700

490

6SL3320-1TE35-0AA3

1PL6228-..L...

0.87

189

0.952

84

2.326 (20.6)

860 (1896)

1XB7700

745

6SL3320-1TE37-5AA3

1)
2)
3)
4)
5)
6)
7)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nS1: Maximum permissible speed that is continuously permitted without speed duty cycles.
nmax: Maximum speed that must not be exceeded.
Speed is reduced with increased radial forces, see selection guides.
The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < 5 motor rated frequency.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the motor rated current.
Siemens PM 21 2011

5/83

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Speed
during field
weakening1)

Continuous
speed,
max.2)

Speed,
max.3)

nrated

SH

Prated

Mrated

Irated

Urated

n2

nS1

nmax

kW (HP)

Nm (lbf-ft)

rpm

rpm

rpm

Order No.

rpm

1PL6 asynchronous motor

Forced ventilation

Line voltage 400 V 3 AC, Active Line Module

400

180
225

800

1150

280

180
225

280

1750

180
225

280

2900

180
225

24.5 (32.9)

585 (432)

69

300

1700

35004)5)

50005)

1PL6184- 7 7 B 7 7 - 0 .. .

31.5 (42.2)

752 (555)

90

290

1900

35004)5)

50005)

1PL6186- 7 7 B 7 7 - 0 .. .

1074 (792)

117

300

1600

31004)5)

45005)

1PL6224- 7 7 B 7 7 - 0 .. .

45005)

1PL6226- 7 7 B 7 7 - 0 .. .

45 (60.4)
57 (76.4)

1361 (1004)

145

305

1800

31004)5)

72 (96.6)

1719 (1268)

181

305

1800

31004)5)

45004)5)

1PL6228- 7 7 B 7 7 - 0 .. .

195 (262)

2328 (1717)

335

400

1700

2200

3300

1PL6284- 7 7 C 7 7 - 0 .. .

250 (335)

2984 (2201)

440

385

1900

2200

3300

1PL6286- 7 7 C 7 7 - 0 .. .

310 (416)

3701 (2730)

570

370

2200

2200

3300

1PL6288- 7 7 C 7 7 - 0 .. .

540 (398)

121

400

2500

35004)

5000

1PL6184- 7 7 D 7 7 - 0 .. .

65 (87.2)
85 (114)

706 (521)

158

400

2700

35004)

5000

1PL6186- 7 7 D 7 7 - 0 .. .

120 (161)

997 (735)

218

400

2800

31004)

4500

1PL6224- 7 7 D 7 7 - 0 .. .

155 (208)

1287 (949)

275

400

2600

31004)

4500

1PL6226- 7 7 D 7 7 - 0 .. .

190 (255)

1578 (1164)

334

400

2500

31004)

45004)

1PL6228- 7 7 D 7 7 - 0 .. .

280 (375)

2325 (1715)

478

400

2200

2200

3300

1PL6284- 7 7 D 7 7 - 0 .. .

355 (476)

2944 (2172)

637

380

2200

2200

3300

1PL6286- 7 7 D 7 7 - 0 .. .

435 (583)

3607 (2688)

765

385

2200

2200

3300

1PL6288- 7 7 D 7 7 - 0 .. .

89 (119)

486 (359)

166

400

4500

35004)

5000

1PL6184- 7 7 F 7 7 - 0 .. .

125 (168)

682 (503)

231

400

4500

35004)

5000

1PL6186- 7 7 F 7 7 - 0 .. .

165 (221)

900 (664)

292

400

2900

31004)

4500

1PL6224- 7 7 F 7 7 - 0 .. .

200 (268)

1091 (805)

350

400

2900

31004)

4500

1PL6226- 7 7 F 7 7 - 0 .. .

265 (355)

1446 (1067)

470

400

2900

31004)

45004)

1PL6228- 7 7 F 7 7 - 0 .. .

370 (496)

2019 (1489)

616

400

2200

2200

3300

1PL6284- 7 7 F 7 7 - 0 .. .

445 (597)

2429 (1792)

736

400

2200

2200

3300

1PL6286- 7 7 F 7 7 - 0 .. .

560 (751)

3055 (2253)

924

400

2200

2200

3300

1PL6288- 7 7 F 7 7 - 0 .. .

113 (152)

372 (274)

209

400

5000

35004)

5000

1PL6184- 7 7 L 7 7 - 0 .. .

150 (201)

494 (364)

280

390

5000

35004)

5000

1PL6186- 7 7 L 7 7 - 0 .. .

205 (275)

675 (498)

365

400

3500

31004)

4500

1PL6224- 7 7 L 7 7 - 0 .. .

4500

1PL6226- 7 7 L 7 7 - 0 .. .

45004)

1PL6228- 7 7 L 7 7 - 0 .. .

270 (362)

889 (656)

470

400

3500

31004)

300 (402)

988 (729)

530

400

3500

31004)

For versions, see

Order No. supplement and
options on page 5/90.

5/84

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Rated
Moment
frequency of inertia

cos

rated

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

frated

Hz

kgm2 (lbf-in-s2) kg (lb)

Type

Rated output For additional versions

current6)
and components
see chapter SINAMICS
Irated
S120 drive system
Order No.

1PL6184-..B...

0.86

33

0.800

14.4

0.503 (4.45)

370 (816)

1XB7322

85

6SL3120-1TE28-5AA3

1PL6186-..B...

0.85

47

0.814

14.3

0.666 (5.89)

440 (970)

1XB7322

857)

6SL3120-1TE28-5AA3

1PL6224-..B...

0.87

45

0.844

14.2

1.479 (13.1)

630 (1389)

1XB7322

132

6SL3120-1TE31-3AA3

1PL6226-..B...

0.85

67

0.868

14.0

1.930 (17.1)

750 (1654)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6228-..B...

0.86

77

0.871

14.0

2.326 (20.6)

860 (1896)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6284-..C...

0.90

95

0.929

27.3

4.2 (37.2)

1300 (2867)

1XB7712

380

6SL3320-1TE33-8AA3

1PL6286-..C...

0.90

135

0.934

27.3

5.2 (46.0)

1500 (3308)

1XB7712

490

6SL3320-1TE35-0AA3

1PL6288-..C...

0.90

170

0.939

27.3

6.3 (55.8)

1700 (3749)

1XB7712

745

6SL3320-1TE37-5AA3

1PL6184-..D...

0.86

46

0.906

39.4

0.503 (4.45)

370 (816)

1XB7322

132

6SL3120-1TE31-3AA3

1PL6186-..D...

0.86

62

0.910

39.4

0.666 (5.89)

440 (970)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6224-..D...

0.85

86

0.930

39.1

1.479 (13.1)

630 (1389)

1XB7422

260

6SL3320-1TE32-6AA3

1PL6226-..D...

0.87

92

0.930

39.2

1.930 (17.1)

750 (1654)

1XB7700

310

6SL3320-1TE33-1AA3

1PL6228-..D...

0.88

102

0.931

39.2

2.326 (20.6)

860 (1896)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6284-..D...

0.89

156

0.950

38.9

4.2 (37.2)

1300 (2867)

1XB7712

490

6SL3320-1TE35-0AA3

1PL6286-..D...

0.89

214

0.953

38.9

5.2 (46.0)

1500 (3308)

1XB7712

840

6SL3320-1TE38-4AA3

1PL6288-..D...

0.89

248

0.955

38.9

6.3 (55.8)

1700 (3749)

1XB7712

985

6SL3320-1TE41-0AA3

1PL6184-..F...

0.84

68

0.921

59.3

0.503 (4.45)

370 (816)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6186-..F...

0.84

92

0.935

59.3

0.666 (5.89)

440 (970)

1XB7422

260

6SL3320-1TE32-6AA3

1PL6224-..F...

0.87

90

0.942

59.2

1.479 (13.1)

630 (1389)

1XB7700

310

6SL3320-1TE33-1AA3

1PL6226-..F...

0.87

122

0.942

59.1

1.930 (17.1)

750 (1654)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6228-..F...

0.86

174

0.948

59.0

2.326 (20.6)

860 (1896)

1XB7700

490

6SL3320-1TE35-0AA3

1PL6284-..F...

0.90

162

0.959

59.0

4.2 (37.2)

1300 (2867)

1XB7712

745

6SL3320-1TE37-5AA3

1PL6286-..F...

0.91

182

0.960

59.0

5.2 (46.0)

1500 (3308)

1XB7712

8407)

6SL3320-1TE38-4AA3

1PL6288-..F...

0.91

232

0.962

59.0

6.3 (55.8)

1700 (3749)

1XB7712

1260

6SL3320-1TE41-2AA3

1PL6184-..L...

0.85

79

0.938

97.6

0.503 (4.45)

370 (816)

1XB7422

210

6SL3320-1TE32-1AA3

1PL6186-..L...

0.84

110

0.943

97.5

0.666 (5.89)

440 (970)

1XB7700

310

6SL3320-1TE33-1AA3

1PL6224-..L...

0.86

118

0.950

97.5

1.479 (13.1)

630 (1389)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6226-..L...

0.87

160

0.952

97.4

1.930 (17.1)

750 (1654)

1XB7700

490

6SL3320-1TE35-0AA3

1PL6228-..L...

0.86

188

0.952

97.3

2.326 (20.6)

860 (1896)

1XB7700

745

6SL3320-1TE37-5AA3

1)
2)
3)
4)
5)
6)
7)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nS1: Maximum permissible speed that is continuously permitted without speed duty cycles.
nmax: Maximum speed that must not be exceeded.
Speed is reduced with increased radial forces, see selection guides.
The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < 5 motor rated frequency.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2 kHz.
Siemens PM 21 2011

5/85

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Speed
during field
weakening1)

Continuous
speed,
max.2)

Speed,
max.3)

nrated

SH

Prated

Mrated

Irated

Urated

n2

nS1

nmax

kW (HP)

Nm (lbf-ft)

rpm

rpm

rpm

Order No.

rpm

1PL6 asynchronous motor

Forced ventilation

Line voltage 480 V 3 AC, Smart/Basic/Active Line Module

500

180
225

1000

1350

280

180
225

280

2000

180
225

280

2900

180
225

30 (40.2)

573 (423)

66

370

1900

35004)5)

50005)

1PL6184- 7 7 B 7 7 - 0 .. .

40 (53.6)

764 (564)

91

355

2000

35004)5)

50005)

1PL6186- 7 7 B 7 7 - 0 .. .

55 (73.8)

1050 (774)

114

370

1800

31004)5)

45005)

1PL6224- 7 7 B 7 7 - 0 .. .

45005)

1PL6226- 7 7 B 7 7 - 0 .. .

72 (96.6)

1375 (1014)

147

375

2000

31004)5)

90 (121)

1719 (1268)

180

380

1900

31004)5)

45004)5)

1PL6228- 7 7 B 7 7 - 0 .. .

235 (315)

2244 (1655)

335

480

2200

2200

3300

1PL6284- 7 7 C 7 7 - 0 .. .

310 (416)

2961 (2184)

440

480

2200

2200

3300

1PL6286- 7 7 C 7 7 - 0 .. .

385 (516)

3677 (2712)

570

460

2200

2200

3300

1PL6288- 7 7 C 7 7 - 0 .. .

523 (386)

119

460

3000

35004)

5000

1PL6184- 7 7 D 7 7 - 0 .. .

74 (99.2)
98 (131)

693 (511)

156

460

3100

35004)

5000

1PL6186- 7 7 D 7 7 - 0 .. .

137 (184)

969 (715)

215

460

2900

31004)

4500

1PL6224- 7 7 D 7 7 - 0 .. .

172 (231)

1217 (898)

265

460

2900

31004)

4500

1PL6226- 7 7 D 7 7 - 0 .. .

218 (292)

1542 (1137)

332

460

2900

31004)

45004)

1PL6228- 7 7 D 7 7 - 0 .. .

325 (436)

2299 (1696)

478

470

2200

2200

3300

1PL6284- 7 7 D 7 7 - 0 .. .

410 (550)

2901 (2140)

637

445

2200

2200

3300

1PL6286- 7 7 D 7 7 - 0 .. .

505 (677)

3573 (2635)

765

450

2200

2200

3300

1PL6288- 7 7 D 7 7 - 0 .. .

98 (131)

468 (345)

161

460

5000

35004)

5000

1PL6184- 7 7 F 7 7 - 0 .. .

135 (181)

645 (476)

220

460

5000

35004)

5000

1PL6186- 7 7 F 7 7 - 0 .. .

178 (239)

850 (627)

275

460

2900

31004)

4500

1PL6224- 7 7 F 7 7 - 0 .. .

220 (295)

1050 (774)

342

460

2900

31004)

4500

1PL6226- 7 7 F 7 7 - 0 .. .

288 (386)

1375 (1014)

450

460

2900

31004)

45004)

1PL6228- 7 7 F 7 7 - 0 .. .

415 (557)

1981 (1461)

616

455

2200

2200

3300

1PL6284- 7 7 F 7 7 - 0 .. .

500 (671)

2387 (1761)

736

455

2200

2200

3300

1PL6286- 7 7 F 7 7 - 0 .. .

630 (845)

3009 (2219)

924

455

2200

2200

3300

1PL6288- 7 7 F 7 7 - 0 .. .

113 (152)

372 (274)

209

400

5000

35004)

5000

1PL6184- 7 7 L 7 7 - 0 .. .

150 (201)

494 (364)

280

390

5000

35004)

5000

1PL6186- 7 7 L 7 7 - 0 .. .

205 (275)

675 (498)

365

400

3500

31004)

4500

1PL6224- 7 7 L 7 7 - 0 .. .

4500

1PL6226- 7 7 L 7 7 - 0 .. .

45004)

1PL6228- 7 7 L 7 7 - 0 .. .

270 (362)

889 (656)

470

395

3500

31004)

300 (402)

988 (729)

530

400

3500

31004)

For versions, see

Order No. supplement and
options on page 5/90.

5/86

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Rated
Moment
frequency of inertia

cos

rated

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

frated

Hz

kgm2 (lbf-in-s2) kg (lb)

Type

Rated output For additional versions

current6)
and components
see chapter SINAMICS
Irated
S120 drive system
Order No.

1PL6184-..B...

0.84

34

0.844

17.6

0.503 (4.45)

370 (816)

1XB7322

85

6SL3120-1TE28-5AA3

1PL6186-..B...

0.84

46

0.845

17.6

0.666 (5.89)

440 (970)

1XB7322

132

6SL3120-1TE31-3AA3

1PL6224-..B...

0.86

46

0.875

17.5

1.479 (13.1)

630 (1389)

1XB7322

132

6SL3120-1TE31-3AA3

1PL6226-..B...

0.85

66

0.887

17.4

1.930 (17.1)

750 (1654)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6228-..B...

0.85

79

0.894

17.4

2.326 (20.6)

860 (1896)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6284-..C...

0.90

90

0.939

34.0

4.2 (37.2)

1300 (2867)

1XB7712

380

6SL3320-1TE33-8AA3

1PL6286-..C...

0.90

135

0.945

34.0

5.2 (46.0)

1500 (3308)

1XB7712

490

6SL3320-1TE35-0AA3

1PL6288-..C...

0.90

170

0.948

34.0

6.3 (55.8)

1700 (3749)

1XB7712

745

6SL3320-1TE37-5AA3

1PL6184-..D...

0.86

44

0.918

46.1

0.503 (4.45)

370 (816)

1XB7322

132

6SL3120-1TE31-3AA3

1PL6186-..D...

0.85

60

0.920

46.0

0.666 (5.89)

440 (970)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6224-..D...

0.85

82

0.940

45.8

1.479 (13.1)

630 (1389)

1XB7422

2107)

6SL3320-1TE32-1AA3

1PL6226-..D...

0.87

88

0.940

45.8

1.930 (17.1)

750 (1654)

1XB7700

2607)

6SL3320-1TE32-6AA3

1PL6228-..D...

0.88

100

0.938

45.8

2.326 (20.6)

860 (1896)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6284-..D...

0.89

157

0.955

45.5

4.2 (37.2)

1300 (2867)

1XB7712

490

6SL3320-1TE35-0AA3

1PL6286-..D...

0.89

215

0.957

45.5

5.2 (46.0)

1500 (3308)

1XB7712

840

6SL3320-1TE38-4AA3

1PL6288-..D...

0.89

248

0.959

45.5

6.3 (55.8)

1700 (3749)

1XB7712

985

6SL3320-1TE41-0AA3

1PL6184-..F...

0.83

70

0.934

67.5

0.503 (4.45)

370 (816)

1XB7322

200

6SL3120-1TE32-0AA3

1PL6186-..F...

0.83

94

0.940

67.5

0.666 (5.89)

440 (970)

1XB7422

260

6SL3320-1TE32-6AA3

1PL6224-..F...

0.86

91

0.944

67.5

1.479 (13.1)

630 (1389)

1XB7700

310

6SL3320-1TE33-1AA3

1PL6226-..F...

0.86

124

0.948

67.5

1.930 (17.1)

750 (1654)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6228-..F...

0.85

176

0.948

67.3

2.326 (20.6)

860 (1896)

1XB7700

490

6SL3320-1TE35-0AA3

1PL6284-..F...

0.90

161

0.961

67.3

4.2 (37.2)

1300 (2867)

1XB7712

745

6SL3320-1TE37-5AA3

1PL6286-..F...

0.91

181

0.963

67.3

5.2 (46.0)

1500 (3308)

1XB7712

8407)

6SL3320-1TE38-4AA3

1PL6288-..F...

0.91

231

0.965

67.3

6.3 (55.8)

1700 (3749)

1XB7712

1260

6SL3320-1TE41-2AA3

1PL6184-..L...

0.85

79

0.938

97.6

0.503 (4.45)

370 (816)

1XB7422

210

6SL3320-1TE32-1AA3

1PL6186-..L...

0.84

110

0.943

97.5

0.666 (5.89)

440 (970)

1XB7700

310

6SL3320-1TE33-1AA3

1PL6224-..L...

0.86

118

0.950

97.5

1.479 (13.1)

630 (1389)

1XB7700

380

6SL3320-1TE33-8AA3

1PL6226-..L...

0.87

160

0.952

97.4

1.930 (17.1)

750 (1654)

1XB7700

490

6SL3320-1TE35-0AA3

1PL6228-..L...

0.86

188

0.952

97.3

2.326 (20.6)

860 (1896)

1XB7700

745

6SL3320-1TE37-5AA3

1)
2)
3)
4)
5)
6)
7)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nS1: Maximum permissible speed that is continuously permitted without speed duty cycles.
nmax: Maximum speed that must not be exceeded.
Speed is reduced with increased radial forces, see selection guides.
The speed is limited to lower values in some cases. The following restriction applies: Maximum output frequency < 5 motor rated frequency.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2 kHz.

Siemens PM 21 2011

5/87

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Selection and ordering data

Rated
speed

Shaft
height

Rated
power

Rated
torque

Rated
current

Rated
voltage

Speed
Continuous
during field speed,
weakening1) max.2)

Speed,
max.3)

nrated

SH

Prated

Mrated

Irated

Urated

n2

nS1

nmax

kW (HP)

Nm (lbf-ft)

rpm

rpm

rpm

Order No.

rpm

1PL6 asynchronous motor

Forced ventilation

Order
code

Line voltage 690 V 3 AC, Active Line Module

800

1150

1750

280

280

280

185 (248)

2208 (1629)

185

690

2000

2200

3300

1PL6284- 7 7 C 7 7 - 0 ... -Z

C30

240 (322)

2865 (2113)

250

665

2100

2200

3300

1PL6286- 7 7 C 7 7 - 0 ... -Z

C30

300 (402)

3581 (2641)

320

640

2200

2200

3300

1PL6288- 7 7 C 7 7 - 0 ... -Z

C30

272 (365)

2259 (1666)

270

690

2200

2200

3300

1PL6284- 7 7 D 7 7 - 0 ... -Z

C30

344 (461)

2857 (2107)

359

655

2200

2200

3300

1PL6286- 7 7 D 7 7 - 0 ... -Z

C30

422 (566)

3504 (2585)

431

665

2200

2200

3300

1PL6288- 7 7 D 7 7 - 0 ... -Z

C30

359 (481)

1959 (1445)

347

690

2200

2200

3300

1PL6284- 7 7 F 7 7 - 0 ... -Z

C30

432 (579)

2357 (1739)

415

690

2200

2200

3300

1PL6286- 7 7 F 7 7 - 0 ... -Z

C30

543 (728)

2963 (2186)

520

690

2200

2200

3300

1PL6288- 7 7 F 7 7 - 0 ... -Z

C30

For versions, see Order No.

supplement and options on
page 5/92.

5/88

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Motor type
(repeated)

Power
factor

Magnetizing
current

Efficiency Rated
Moment
frequency of inertia

cos

rated

Weight,
approx.

Terminal
box

SINAMICS S120 Motor Module

Rated output For additional versions
current4)
and components
see chapter SINAMICS
Irated
S120 drive system

frated

Hz

kgm2 (lbf-in-s2) kg (lb)

Type

Order No.

1PL6284-..C...

0.90

55

0.928

27

4.2 (37.2)

1300 (2867)

1XB7712

215

6SL3320-1TG32-2AA3

1PL6286-..C...

0.90

80

0.934

27

5.2 (46.0)

1500 (3308)

1XB7712

330

6SL3320-1TG33-3AA3

1PL6288-..C...

0.90

100

0.938

27

6.3 (55.8)

1700 (3749)

1XB7712

410

6SL3320-1TG34-1AA3

1PL6284-..D...

0.89

89

0.949

38.9

4.2 (37.2)

1300 (2867)

1XB7712

330

6SL3320-1TG33-3AA3

1PL6286-..D...

0.89

123

0.953

38.9

5.2 (46.0)

1500 (3308)

1XB7712

410

6SL3320-1TG34-1AA3

1PL6288-..D...

0.89

143

0.955

38.9

6.3 (55.8)

1700 (3749)

1XB7712

4655)

6SL3320-1TG34-7AA3

1PL6284-..F...

0.90

93

0.958

59

4.2 (37.2)

1300 (2867)

1XB7712

410

6SL3320-1TG34-1AA3

1PL6286-..F...

0.91

105

0.960

59

5.2 (46.0)

1500 (3308)

1XB7712

465

6SL3320-1TG34-7AA3

1PL6288-..F...

0.91

133

0.962

59

6.3 (55.8)

1700 (3749)

1XB7712

575

6SL3320-1TG35-8AA3

1)
2)
3)
4)
5)

n2: Max. permissible thermal speed at constant power or speed which is at the voltage limit when P = Prated.
nS1: Maximum permissible speed that is continuously permitted without speed duty cycles.
nmax: Maximum speed that must not be exceeded.
The rated pulse frequencies must be taken into account. The rated motor data is valid for 4 kHz or 2 kHz.
The rated output current of the Motor Module is lower than the rated motor current at 2 kHz.
Siemens PM 21 2011

5/89

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Order No. supplements for 1PL618/1PL622 motors

Data position of the Order No.

Shaft height 180

Shaft height 225

Overall length1)

9 10 11 12

13 14 15 16

. 0 Z

Fan
External fan, PG cable gland in terminal box

Without external fan, for pipe connection, PG cable gland in terminal box

External fan, metric cable gland in terminal box

Without external fan, for pipe connection, metric cable gland in terminal box

Encoder systems for motors without DRIVE-CLiQ interface

Without encoder

Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R)

Incremental encoder HTL 1024 S/R (encoder HTL1024S/R)

Incremental encoder HTL 2048 S/R (encoder HTL2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R without C and D tracks (encoder IN2048S/R)

Encoder systems for motors with DRIVE-CLiQ interface

Absolute encoder 22 bit (resolution 4194304, internal 2048 S/R) + 12 bit multi-turn
(traversing range 4096 revolutions) (encoder AM22DQ)

Incremental encoder 22 bit (resolution 4194304, internal 2048 S/R) + commutation position 11 bit
(encoder IC22DQ)

Incremental encoder 22 bit without commutation position (encoder IN22DQ)

Rated speeds at 380 V to 480 V 3 AC (winding design)

400 rpm/500 rpm

1000 rpm/1150 rpm/1350 rpm

1500 rpm/1750 rpm/2000 rpm

2500 rpm/2900 rpm

Cable connection (view of DE)

Terminal box
Cable entry
Top

Right

Top

DE

Top

NDE

Top

Left

3
For 12th to 16th data position
of the Order No., see
page 5/91.

1)

Not selectable. Determined by the choice of rated power.

5/90

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Order No. supplements for 1PL618/1PL622 motors (continued)

Data position of the Order No.

Shaft height 180

Shaft height 225

9 10 11 12

13 14 15 16

. 0 Z

Type of construction
IM B3

IM B3

Hoisting system for different types of construction (IM B6, IM B7, IM B8, IM V5, IM V6)

IM B35

1PL618 with A450 flange

1PL622 with A550 flange

IM B35

1PL618 with A450 flange

1PL622 with A550 flange
Hoisting system for different types of construction (IM V15, IM V36)

Bearing version

Vibration magnitude acc. to Shaft and

Siemens/EN 60034-141)
flange accuracy1)

Coupling

R/A

Coupling

R/A

Coupling

S/A

Coupling

SR/A

Belt

R/A

Belt

R/A

Increased cantilever forces

R/A

Increased cantilever forces

R/A

Shaft extension DE

Balancing

Direction of air flow (fan)

Fitted key

Half-key

DE NDE

Fitted key

Half-key

NDE

Fitted key

Full-key

DE NDE

Fitted key

Full-key

NDE DE2)

Plain shaft

DE NDE

Plain shaft

NDE DE2)

DE2)

Paint finish
Primed

Anthracite RAL 7016

Special paint finish in anthracite RAL 7016

Special version (order codes are required for options)

1)
2)

For definition, see 1PL6 Configuration Manual.

Preferred direction of air flow in a polluted environment.
Siemens PM 21 2011

5/91

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Order No. supplements for 1PL628 motors

Data position of the Order No.

Shaft height 280

Overall length1)

7
.

9 10 11 12

13 14 15 16

. 0 Z

Fans2)

Mounting

Direction of air flow

External fan

NDE top

NDE J DE

External fan

NDE right

NDE J DE

External fan

NDE left

NDE J DE

External fan

DE top

DE J NDE

External fan

DE right

DE J NDE

External fan

DE left

DE J NDE

Without external fan

NDE right for single pipe connection

Encoder systems for motors without DRIVE-CLiQ interface

Without encoder

Absolute encoder 2048 S/R, 4096 revolutions, multi-turn (encoder AM2048S/R)

Incremental encoder HTL 1024 S/R (encoder HTL1024S/R)

Incremental encoder HTL 2048 S/R (encoder HTL2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D tracks (encoder IC2048S/R)

Incremental encoder sin/cos 1 Vpp 2048 S/R without C and D tracks (encoder IN2048S/R)

Encoder systems for motors with DRIVE-CLiQ interface

Absolute encoder 22 bit (resolution 4194304, internal 2048 S/R) + 12 bit multi-turn
(traversing range 4096 revolutions) (encoder AM22DQ)

Incremental encoder 22 bit (resolution 4194304, internal 2048 S/R) + commutation position 11 bit
(encoder IC22DQ)

Incremental encoder 22 bit without commutation position (encoder IN22DQ)

Rated speeds at 380 V to 480 V 3 AC (winding design)

800 rpm/1000 rpm

1150 rpm/1350 rpm

1750 rpm/2000 rpm

Rated speeds at 690 V 3 AC (winding design)

800 rpm

Order code C30 required

1150 rpm

Order code C30 required

1750 rpm

Order code C30 required

Cable connection (view of DE)2)

Terminal box
Cable entry

Signal connection

NDE right

Bottom

DE

NDE left

Bottom

DE

NDE top

Right

DE

DE top

Right

NDE

5
For 12th to 16th data position
of the Order No., see
page 5/93.

1)
2)

Not selectable. Determined by the choice of rated power.

See selection guides.

5/92

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Order No. supplements for 1PL628 motors (continued)

Data position of the Order No.

Shaft height 280

9 10 11 12

13 14 15 16

. 0 Z

Type of construction1)
IM B3

IM V5

Can be subsequently modified to IM V6.

IM B35

With A660 flange

IM V15

With A660 flange

1
3

Can be subsequently modified to IM V35.

Bearing version

Vibration magnitude acc. to Shaft and

Siemens/EN 60034-142)
flange accuracy2)

Coupling

Coupling

R/A

Increased cantilever forces

Increased cantilever forces

R/A

Shaft extension DE

Balancing

Fitted key

Half-key

Fitted key

Full-key

Plain shaft

Paint finish
Primed

Anthracite RAL 7016

Special paint finish in anthracite RAL 7016

Special version (order codes are required for options)

Permissible combinations of mechanical variants for 1PL6 motors, see 1PH7 motors, page 5/76.

1)
2)

See technical definitions for AC motors in chapter Servomotors.

For definition, see 1PL6 Configuration Manual.
Siemens PM 21 2011

5/93

 Siemens AG 2010

Main motors
Asynchronous and synchronous motors for SINAMICS S120
1PL6 asynchronous motors
Forced ventilation, IP23 degree of protection

Options

Order
code

Description

For use with motors

C30

Winding version 690 V 3 AC

G14

Fan unit with air filter

G80

Prepared for mounting an incremental encoder POG 10

K08

Signal connector mounted opposite

K16

Second standard shaft extension (only possible without encoder)

K31

2nd rating plate supplied separately in terminal box

K40

Re-lubrication device DE and NDE

(not possible with bearings for increased maximum speed)

Standard

K45

230 V AC standstill heating

K55

Cable entry plate, terminal box, customer-specific1)

K83

Terminal box rotated through +90 degrees

K84

Terminal box rotated through -90 degrees

K85

Terminal box rotated through 180 degrees

L27

NDE bearing in insulated version

Only for 1PL618

Standard

1PL618
1PL622

1PL628

Standard with
1PL622
M83

Additional thread for a setting screw on motor feet

Y55

Non-standard shaft extension DE

On request

On request

Y80

Different rating plate data1)

On request

On request

Y82

Additional rating plate with customer data1)

On request

On request

Standard

Standard

Primer or paint finish in anthracite RAL 7016

Paint finish in other RAL color2)

R1Y

Special finish in other RAL

R2Y

color2)

Option available
Option not available

When ordering a motor with options, -Z should be added to the order number.

1)
2)

Plain text is required in addition to order code.

RAL color number must be specified in addition to order code.

5/94

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH8 motors
Terminal box/Cable cross-sections

Technical specifications
Terminal box
Cable entry
type
Power
(see selection
and ordering data
for assignment)

External signals

Max. outer
cable
diameter3)

Number of main terminals

mm (in)

Max. cross- Max.

section
rated
per terminal current4)
mm

gk803

1 M25 1.5 1 M16 1.51)

20 (0.79)

Phases:
3 M5
Grounding: 2 M5

1 10

52

gk813

1 M32 1.5 1 M16 1.51)

24.2 (0.95)

Phases:
3 M5
Grounding: 2 M5

1 16

70

gk823

1 M32 1.5 1 M16 1.51)

24.2 (0.95)

Phases:
3 M5
Grounding: 2 M5

1 16

70

gk826

1 M32 1.5 1 M16 1.51)

24.2 (0.95)

Phases:
6 M5
Grounding: 2 M5

1 10

52

gk833

1 M40 1.5 1 M16 1.51)

32 (1.26)

Phases:
3 M6
Grounding: 2 M6

1 35

110

gk843

1 M50 1.5 1 M16 1.51)

38 (1.50)

Phases:
3 M6
Grounding: 2 M6

1 50

133

gk863

1 M50 1.5 1 M16 1.51)

38 (1.50)

Phases:
3 M6
Grounding: 2 M6

1 50

133

gk873

1 M63 1.5 1 M16 1.51)

42.6 (1.68)

Phases:
3 M6
Grounding: 2 M6

1 50

133

gk874

1 M63 1.5 1 M16 1.51)

42.6 (1.68)

Phases:

2 70

240

3 M10

Grounding: 2 M6
1XB7322-P05

2 M50 1.5 1 PG 13.52)

38 (1.50)

Phases:
3 M12
2 50
Grounding: 2 fixing eyelet

210

1XB7422-P06

2 M63 1.5 1 PG 13.52)

53 (2.09)

Phases:
3 M12
2 70
Grounding: 2 fixing eyelet

270

1XB7700-P02

3 M75 1.5 1 PG 13.52)

68 (2.68)

Phases:
3 2 M12
3 150
Grounding: 2 fixing eyelet

700

1XB7712-P03

4 M75 1.5 1 PG 13.52)

68 (2.68)

Phases:
3 4 M16
Grounding: 4 M16

4 185

1150

1XB7712-P01

3 M63 1.5 1 M20 1.55)

1 M25 1.56)

53 (2.09)

Phases:
3 4 M16
Grounding: 4 M16

3 95

450

1XB7712-P03

4 M75 1.5 1 M20 1.55)

1 M25 1.56)

68 (2.68)

Phases:
3 4 M16
Grounding: 4 M16

4 185

1150

1XB7820-P00

Undrilled

Phases:
2 3 4 M16 8 240
Grounding: 8 M16

2100

With 1PH835 only

1 M20 1.55)
1 M25 1.56)

For terminal box type 1XB7712-P01 or 1XB7712-P03, other cable entries (power) can be ordered via
P options depending on the standard:
P00
P01
P02
P03
P04

Undrilled cable entry plate

Cable entry plate 3 x M63 x 1.5 (not for 1XB7712-P01)
Cable entry plate 3 x M75 x 1.5
Cable entry plate 4 x M75 x 1.5 (not for 1XB7712-P03)
Cable entry plate 4 x M63 x 1.5

For terminal box type 1XB7700-P02 other cable entries (power) can be ordered via P options
depending on the standard:
P00
P01

Undrilled cable entry plate

Cable entry plate 3 x M63 x 1.5

For terminal box type 1XB7322-P05 and1XB7422-P06, other cable entries (power) can be ordered via the
P option depending on the standard:
P00

Undrilled cable entry plate

For options K09 or K10, instead of terminal box gk863, terminal box gk873 is used mounted on the side.
For options K09 or K10, instead of terminal box gk833, terminal box gk843 is used mounted on the side.
For options K09 or K10, instead of terminal box gk813, terminal box gk823 is used mounted on the side.

1)
2)
3)
4)
5)
6)

Thread M16 1.5 arranged with 90 to signal connection; thread only for options A12, A25 and 9th data position "A" (without encoder).
Arranged opposite of signal connection (sideways from cable entry plate).
Dependent on the design of the metric cable gland.
Current-carrying capacity based on EN 60204-1/IEC 60364-5-52 with installation type E.
Mounted on left side of terminal box (viewed toward cable entries).
Mounted on right side of terminal box (viewed toward cable entries).
Siemens PM 21 2011

5/95

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH8 motors
Ventilation data/Sound pressure levels

Technical specifications (continued)

Motor
type

Direction of
air flow

Forced ventilation

Volume
of air,
min.

Sound pressure level

LpA (1 m)
Motor + external fan
operation at 50 Hz
tolerance + 3 dB

m3/s (ft3/s)

dB

0.02 (0.71)
0.02 (0.71)

701)
701)

230 V 50 Hz ( 10 %)

230 V 60 Hz ( 10 %)

265 V 60 Hz ( 10 %)

NDE DE
DE NDE

0.33
0.20

0.25
0.16

0.32
0.19

400 V 50 Hz ( 10 %)

400 V 60 Hz ( 10 %)

480 V 60 Hz ( 10 %)

1PH810

NDE DE
DE NDE

0.12
0.13

0.09
0.09

0.12
0.13

0.04 (1.41)
0.04 (1.41)

701)
701)

1PH813

NDE DE
DE NDE

0.13
0.21

0.16
0.19

0.17
0.23

0.09 (3.18)
0.09 (3.18)

701)
701)

1PH816

NDE DE
DE NDE

0.17
0.23

0.22
0.30

0.22
0.30

0.16 (5.65)
0.16 (5.65)

731)
731)

400 V 50 Hz ( 10 %)

400 V 60 Hz
(+ 5%/- 10 %)

480 V 60 Hz
(+ 5%/- 10 %)

1PH808
Forced ventilation

Fan motor
max. current consumption at

Forced ventilation
1PH835.-1..1
(IP55 degree of
protection)

NDE DE
DE NDE

4.7

4.6

4.6

0.75 (26.5)

772)

1PH835.-1..4
(IP23 degree of
protection)

NDE DE
DE NDE

4.7

4.6

4.6

1 (35.3)

772)

1)
2)

For rated pulse frequency of 4 kHz and speed range up to 5000 rpm.
For rated pulse frequency of 2.5 kHz and speed range up to 2800 rpm.

5/96

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH8 motors Cooling
data/Sound pressure levels/Water specification

Technical specifications (continued)

Cooling data and sound pressure levels
Motor
type

Flow volume,
min.

Pressure drop

Water connection at NDE

thread

Sound pressure level LpA

(1 m)
motor
tolerance + 3 dB

l/min (US gal./min)

bar

Inch

dB

Water cooling
1PH808

6 (1.58)

0.6

G 1/8

681)

1PH810

8 (2.11)

0.4

G 1/4

681)

1PH813

12 (3.17)

0.9

G 3/8

681)

1PH816

15 (3.96)

0.2

G 1/2

691)

1PH8184

15 (3.96)

0.6

G 3/8

702)

1PH8186

15 (3.96)

0.7

G 3/8

702)

1PH822.-1
(asynchronous variant)

20 (5.28)

0.6

G 3/8

702)

1PH822.-2
(synchronous variant)

25 (6.61)

0.9

G 3/8

703)

1PH828

35 (9.25)

0.6

G 1/2

723)

Water specification
Cooling water quality

The values specified for the cooling water correspond to the requirements for a closed cooling
circuit. Not all of the specified concentrations will occur in the cooling water at the same time.
For trouble-free operation, a filter can be installed. The filter fineness should be no less than
100 m.

Cooling water specifications

pH value

6.0 ... 9.0

Total hardness

< 170 ppm

Conductivity

< 500 S/cm

Operating pressure, max.

< 6 bar

Pressure drop at V(N)

< 1 bar

Cooling water inlet temperature, max.

< 30 C (86 F)

Cooling water temperature, min.

Tcooling water > Tambient - 5 K

Anti-freeze protection / corrosion protection

20 ... 30 %

NALCO 00GE056 inhibitor

0.2 ... 0.25 %

Components
Dissolved substances

< 340 ppm

Max. grain size

< 100 m

Chloride ions

< 40 ppm

Sulfate ions

< 50 ppm

Nitrate ions

< 50 ppm

1)
2)

3)

For rated pulse frequency of 4 kHz and speed range up to 5000 rpm.
For rated pulse frequencies of 2 kHz or 4 kHz and speed ranges:
1PH818 up to 5000 rpm
1PH822 up to 4500 rpm.
At rated pulse frequency of 2 kHz and speed ranges:
1PH822 up to 4500 rpm
1PH828 up to 3300 rpm.
Siemens PM 21 2011

5/97

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH8 motors
Radial force diagrams

Characteristic curves
Permissible radial forces
kN
1PH8 motors
Shaft height 80
FQ 2.1
Standard

G_PM21_EN_00016a

400 - 1500 rpm

1.7

FQ

2000 rpm

Permissible radial forces

kN
1PH8 motors
Shaft height 100
FQ 3.0
Standard

20

40

20

400 - 2000 rpm

4000 rpm

Permissible radial forces

kN
1PH8 motors
Shaft height 100
FQ 2.6
Performance

20

40

60 mm 80
x

G_PM21_EN_00017a

400 - 1500 rpm

x
1.3

2000 rpm
3000 rpm
4000 rpm
5000 rpm

0.9

20
L10h = 40000 h

Siemens PM 21 2011

6000 rpm
8000 rpm
10000 rpm
12000 rpm

1.4

20

40

60 mm 80
x

L10h = 12000 h

Permissible radial forces

kN
1PH8 motors
Shaft height 80
FQ 2.1
Advanced lifetime
1.7

4000 rpm

1.8

L10h = 12000 h

5/98

400 - 2000 rpm

2.2

FQ

6000 rpm
8000 rpm
10000 rpm
12000 rpm
15000 rpm

0.9

60 mm 80
x

G_PM21_EN_00063a

x
1.3

40

L10h = 20000 h

FQ

5000 rpm
6000 rpm
7000 rpm
9000 rpm

1.5

60 mm 80
x

G_PM21_EN_00061a

1.7

FQ

3000 rpm

2.0

L10h = 20000 h

Permissible radial forces

kN
1PH8 motors
Shaft height 80
FQ 2.1
Performance

2000 rpm

5000 rpm
6000 rpm
8000 rpm
10000 rpm

0.9

400 - 1500 rpm

2.5

FQ

3000 rpm
1.3

G_PM21_EN_00062a

40

60 mm 80
x

Permissible radial forces

kN
1PH8 motors
Shaft height 100
FQ 2.6
Advanced lifetime

G_PM21_EN_00064a

400 - 1500 rpm

2.2

FQ
x

2000 rpm

1.8

3000 rpm
4000 rpm
5000 rpm

1.4

20
L10h = 40000 h

40

60 mm 80
x

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH8 motors
Radial force diagrams

Characteristic curves (continued)

Permissible radial forces
kN
1PH8 motors
Shaft height 132
FQ 5 400 - 1500 rpm
Standard
4

FQ
x

G_PM21_EN_00018a

Permissible radial forces

kN
1PH8 motors
Shaft height 160
FQ 6
Standard

2000 rpm

400 - 1500 rpm

2000 rpm

5.5

FQ

3000 rpm
4000 rpm
5000 rpm
6000 rpm
8000 rpm

G_PM21_EN_00089

3000 rpm
4000 min
5000 rpm
6500 rpm

5
4.5

2
1
1 Maximum load
10
40
for 1PH7-compatible
shaft extension (42 x 110 mm
L10h = 20000 h
(1.65 x 4.33 in))
(option V90)

Permissible radial forces

kN
1PH8 motors
Shaft height 132
FQ 3
Performance

70 mm 100
x

G_PM21_EN_00019a

400 - 2000 rpm

4000 rpm

x
2
1.5

40

70 mm 100
x

L10h = 20000 h

2.5

FQ

10

Permissible radial forces

kN
1PH8 motors
5
Shaft height 160
FQ
Performance
4.5

G_PM21_EN_00090

400 - 1500 rpm

3000 rpm

FQ
x

6000 rpm
8000 rpm
10000 rpm

5000 rpm
7000 rpm

3.5

9000 rpm
3

1 Maximum load
10
40
for 1PH7-compatible
shaft extension (42 x 110 mm
(1.65 x 4.33 in))
L10h = 12000 h
(option V90)

Permissible radial forces

kN
1PH8 motors
Shaft height 132
FQ 3.5
Advanced lifetime
3

FQ
x

70 mm 100
x

400 - 1500 rpm

4000 rpm
4500 rpm

Permissible radial forces

kN
1PH8 motors
Shaft height 160
FQ 5
Advanced Lifetime
FQ

2000 rpm
3000 rpm

40

70 mm 100
x

L10h = 12000 h

G_PM21_EN_00020a

2.5

10

G_PM21_EN_00091

400 - 1500 rpm

4.6

2000 rpm

4.2

3000 rpm

4000 rpm

3.8
1

1 Maximum load
10
40
for 1PH7-compatible
shaft extension (42 x 110 mm
(1.65 x 4.33 in))
L10h = 40000 h
(option V90)

70 mm 100
x

10

40

70 mm 100
x

L10h = 40000 h

Siemens PM 21 2011

5/99

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH8 motors
Radial force diagrams

Characteristic curves (continued)

Permissible radial forces
kN
1PH8 motors
Shaft height 180
FQ 6
Standard

G_PM21_EN_00021a

1000 rpm

FQ

Permissible radial forces

kN
1PH8 motors
Shaft height 225
FQ 6 1000 rpm
Standard

G_PM21_EN_00024a

FQ
x

x
4

2000 rpm

3000 rpm

3000 rpm

4000 rpm
40

5000 rpm
80
120 mm 160
x

12

80

120 mm 160
x

L10h = 20000 h

G_PM21_EN_00022a

1000 rpm
1500 rpm

3000 rpm
4000 rpm

10

4500 rpm

40

L10h = 20000 h

Permissible radial forces

kN
1PH8 motors
Shaft height 180
FQ 16
With increased radial
force
14
FQ
x

2000 rpm

5000 rpm

Permissible radial forces

kN 1000 rpm
1PH8 motors
20
Shaft height 225
FQ
1500 rpm
With increased radial
18
force
FQ
16
x
3000 rpm
14
4500 rpm
12

G_PM21_EN_00025a

10
40

120 mm160
x

L10h = 12000 h

Minimum radial force 4 kN

(899 lbf)

Permissible radial forces

kN
1PH8 motors
Shaft height 180
FQ 6
Performance

40

Permissible radial forces

kN
1PH8 motors
Shaft height 225
FQ 6 1000 rpm
Performance

1000 rpm

120 mm 160
x

G_PM21_EN_00026a

FQ

80

L10h = 12000 h

Minimum radial force 5 kN

(1124 lbf)

G_PM21_EN_00023a

FQ

80

x
4

2000 rpm
3000 rpm

4000 rpm
40
L10h = 12000 h

5000 rpm
80
120 mm 160
x

2000 rpm
3000 rpm

4500 rpm

40

80

120 mm 160
x

L10h = 12000 h

Note:
The roller bearings used here (bearings with increased radial force) could sustain damage if they are operated under no load.
Observe the specified minimum radial forces!

5/100

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH8 motors
Radial force diagrams

Characteristic curves (continued)

Permissible radial forces kN
1PH8 motors
Shaft height 280
FQ 11
Standard

G_PM21_EN_00065a

500 rpm
1000 rpm

FQ
x

Permissible radial forces

kN
1PH8 motors
Shaft height 355
FQ 8
Standard

900 rpm

1400 rpm

1800 rpm

FQ
x

1500 rpm
7

2100 rpm

2000 rpm

40

80

120

40

160 mm 200
x

L10h = 20000 h

Permissible radial forces

kN
1PH8 motors
Shaft height 280
FQ 35
With increased radial
force
31
FQ
x
27

G_PM21_EN_00027b

80

120 160 mm 240

x

L10h = 20000 h

G_PM21_EN_00066a

500 rpm
Breaking point
of shaft extensions

1000 rpm

Permissible radial forces

kN
1PH8 motors
70
Shaft height 355
FQ
With increased radial
force
50 900 rpm
FQ
x

G_PM21_EN_00028b

1400 rpm

30 2100 rpm
1500 rpm

23
10
2000 rpm
40
Minimum radial force 9 kN
(2023 lbf)

80

L10h = 12000 h

120

160 mm 200
x

40
Minimum radial force 13 kN
(2923 lbf)

80

120

160 mm 240
x

L10h = 20000 h

Note:
The roller bearings used here (bearings with increased radial force) could sustain damage if they are operated under no load.
Observe the specified minimum radial forces!

Siemens PM 21 2011

5/101

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH7/1PL6 motors
Terminal box/Cable cross-sections

Technical specifications
Terminal
box

Cable
entry

Outer cable
diameter,
max.

Type

Valid for Order No. with

8th data position 2, 4 or 63)

Cable
entry

Outer cable
diameter,
max.1)

Number
of main terminals

Cross-section
per terminal,
max.

Current
per terminal,
max.2)

Valid for Order No. with

8th data position 7 or 8

mm (in)

mm (in)

mm2

1XB7322

2 x PG42

40 (1.57)

2 x M50 x 1.5

38 (1.50)

3 x M12

2 x 50

191

1XB7422

2 x M72 x 2

56 (2.20)

2 x M63 x 1.5

53 (2.09)

3 x M12

2 x 70

242

1XB7700

3 x M72 x 2

56 (2.20)

3 x M75 x 1.5

68 (2.68)

3 x 2 x M12

3 x 150

583

1XB7712

For 1PH728.-..B / 1PH7284-..C / 1PH7284-..D motors

(3+1) 4) x 3 x M16

3 x 95

450

3 x M63 x 1.5

53 (2.09)

For 1PH728.-..F / 1PH7286-..C / 1PH7286-..D / 1PH7288-..C / 1PH7288-..D motors

3 x M75 x 1.5

68 (2.68)

(3+1) 4) x 3 x M16

3 x 185

710

68 (2.68)

(3+1)4) x 4 x M16

4 x 185

925

For 1PL628 motors

4 x M75 x 1.5

1)
2)
3)
4)

Dependent on the design of the metric cable gland.

Current carrying capacity similar to EN 60204-1 for installation type C.
Not for 1PH728/1PL628.
Including ground terminal.

5/102

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH7/1PL6 motors
Ventilation data/Sound pressure levels

Technical specifications (continued)

Motor

Direction of air flow Fan motor

current consumption at

Type

Volume of air,
approx.

Sound pressure level

LpA (1 m)

400 V 50 Hz
( 10 %)

400 V 60 Hz
( 10 %)

480 V 60 Hz
(+ 5 %, - 10 %)

at 50 Hz

Motor + external fan operation

50 Hz
Tolerance +3 dB
Rated pulse frequency
4 kHz/2.5 kHz

m3/s (ft3/s)

dB

Forced ventilation, 1PH7 motors

1PH718

NDE DE
DE NDE

0.8

1.1

1.1

0.19 (6.71)

73

1PH722

NDE DE
DE NDE

1.9
2.8

2.2
2.8

2.2
2.8

0.36 (12.7)
0.36 (12.7)

74
761)

1PH728

NDE DE
DE NDE

2.55

2.6

2.6

0.42 (14.8)

74

Forced ventilation, 1PL6 motors

1PL618

NDE DE
DE NDE

0.8

1.1

1.1

0.27 (9.53)

732)

1PL622

NDE DE
DE NDE

1.9
2.8

2.2
2.8

2.2
2.8

0.38 (13.4)
0.38 (13.4)

742)
761)2)

1PL628

NDE DE
DE NDE

2.55

2.6

2.6

0.52 (18.3)

742)

1)
2)

The sound pressure level can be reduced if the air flow is from the drive end to the non-drive end with option G15 (sound attenuator).
Speed range 0 to 2000 rpm.
Siemens PM 21 2011

5/103

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH7/1PL6 motors
Bearing design/Bearing service life

Technical specifications (continued)

Motor
type

Bearing type

Bearing

Continuous speed
for S1 duty, max.

Motor
end

Bearing
designation

Speed limit, max.1)

ns1

ns12)

nmax.

nmax.2)

rpm

rpm

rpm

rpm

Deep-groove ball
bearing

Coupling output

DE
NDE

6214 C3
6214 C3

3500

4500

5000

7000

Cylindrical roller
bearing

Belt output

DE
NDE

NU22 14E
6214 C3

3500

5000

Cylindrical roller
bearing

Increased radial
forces

DE
NDE

NU22 14E
6214 C3

3000

5000

Deep-groove ball
bearing

Coupling output

DE
NDE

6216 C3
6216 C3

3100

Cylindrical roller
bearing

Belt output

DE
NDE

NU22 16E
6216 C3

3100

4500

1PH7224/1PH7226/ Cylindrical roller

1PL6224/1PL6226 bearing

Increased radial
forces

DE
NDE

NU22 16E
6216 C3

2700

4500

1PH7228/1PL6228

Cylindrical roller
bearing

Increased radial
forces

DE
NDE

NU22 16E
6216 C3

2500

4000

1PH728/1PL628

Deep-groove ball
bearing

Coupling output

DE
NDE

6220 C3
6220 C3

2200

3300

Cylindrical roller
bearing

Belt output

DE
NDE

NU22 0E
6220 C3

2200

3300

1PH718/1PL618

1PH722/1PL622

Drive type

3600
(for 1PH7224)

4500

5500
(for 1PH7224)

Bearing service life

Lifetime lubrication

The bearing service life is limited by material fatigue, the fatigue

service life, or lubrication failure, the grease service life.

On motors equipped with lifetime lubrication, the grease lifetime

is harmonized with bearing service life.

The fatigue service life, the static bearing service life L10h, is
primarily dependent on the mechanical load. This correlation
can be seen in the radial force/axial force diagrams. The values
were determined in accordance with DIN/ISO 281.

Apart from the 1PH728/1PL628 motors, the 1PH7/1PL6 motors in

the basic version have lifetime lubrication.

The grease lifetime is mainly dependent on the bearing size,

speed, temperature as well as the vibration load. The grease lifetime can be extended by especially favorable operating conditions, e.g. low average speed, low bearing temperature, radial
force or vibration load.

For motors with regreasing systems, the bearing service life can
be extended through defined regreasing intervals and influencing factors such as mounting conditions, speed, bearing size
and mechanical load can be compensated.

A reduced bearing service life can be expected for difficult operating conditions and when motors are mounted vertically.

Regreasing system

Lubricating nipples for regreasing are provided as standard on

1PH728/1PL628 motors. With the exception of 1PH728/1PL628
motors, regreasing with lubricating nipples can be supplied as
an option, order code K40.
For more information, see 1PH7 and 1PL6 Configuration
Manuals.

1)
2)

For continuous duty (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle duration of 10 min.
Version for increased maximum speed, see selection and ordering data for 1PH7.

5/104

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH7/1PL6 motors
Radial force diagrams

Characteristic curves
Permissible radial forces
for coupling output
1PH718/1PL618 motors

kN

G_D211_EN_00157

FQ 6

kN

1000 rpm
5

FQ

2000 rpm

G_D211_EN_00158

FQ 6

1000 rpm

FQ

Permissible radial forces

for coupling output
1PH722/1PL622 motors

2000 rpm

3000 rpm

3000 rpm

3
4000 rpm

4500 rpm

5000 rpm

DA65-5261

80

40

DA65-5261

40

120 mm 160
x

L10h = 20000 h

Permissible radial forces

for belt output
1PH718/1PL618 motors

G_D211_EN_00159

FQ

Permissible radial forces

for belt output
1PH722/1PL622 motors

1000 rpm

5
G_D211_EN_00160

16
FQ

13

FQ

120 mm 160
x

L10h = 20000 h

15
kN

80

1000 rpm

kN
14

2000 rpm

11

FQ

3000 rpm
9

3000 rpm
10

4000 rpm

4500 rpm

5000 rpm

2000 rpm

12

DA65-5261

DA65-5261

40

Minimum radial force 3 kN

Permissible radial forces

for belt output
with increased radial force
1PH718/1PL618 motors

120 mm 160
x

L10h = 12000 h

FQ

1000 rpm

kN
1P.. 186

13

40

Minimum radial force 4 kN

G_D211_EN_00161

17

15

FQ

80

Permissible radial forces

for belt output
with increased radial force
1PH722/1PL622 motors

1500 rpm
1P.. 184

3000 rpm

11

G_D211_EN_00162

kN
20

1000 rpm

FQ

16

FQ

120 mm 160
x

L10h = 12000 h

18

80

1500 rpm
3000 rpm

x
14

4000 rpm

4500 rpm

12
5000 rpm
9

10

DA65-5261

DA65-5261

40

Minimum radial force 4 kN

L10h = 12000 h

80

120 mm 160
x

40

Minimum radial force 5 kN

80

120 mm 160
x

L10h = 12000 h

Note:
The roller bearings used here (bearings with increased radial force) could sustain damage if they are operated under no load.
Observe the specified minimum radial forces!

Siemens PM 21 2011

5/105

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH7/1PL6 motors
Radial force diagrams

Characteristic curves (continued)

Permissible radial forces
for coupling output
1PH728/1PL628 motors

kN
G_D211_EN_00163

500 rpm
FQ 11
1000 rpm

FQ

1500 rpm
7

2000 rpm

DA65-5261

40

80

120

160 mm 200
x

L10h > 20000 h

when regreased

kN
Permissible radial forces
34
for belt output
with increased radial force
32
FQ
1PH728/1PL628 motors

500 rpm

G_D211_EN_00164

30
28

FQ

1000 rpm

26
24

1500 rpm

22

2000 rpm

20
DA65-5261

40

Minimum radial force 9 kN

80

120

160 mm 200
x

L10h > 12000 h

when regreased

Note:
The roller bearings used here (bearings with increased radial force) could sustain damage if they are operated under no load.
Observe the specified minimum radial forces!

5/106

Siemens PM 21 2011

 Siemens AG 2010

Main motors
Selection guides
Selection guides for 1PH7 motors
Mounted holding brakes

Options
Mounted holding brake for 1PH718/1PH722 motors

When the power fails or an emergency stop is issued, the drive

is braked from its current speed down to standstill and the brake
holds the drive steady.

A holding brake (Stromag) can be mounted on the DE end of

1PH718/1PH722 motors. The motor shaft is extended using a
shrunk-on stub shaft. The torque is transmitted through a fitted
key in accordance with DIN 6885-1. In addition, the stub shaft
can be axially secured using a thrust washer and a central screw
(M20).

The holding brake is designed for dry operation and maintains

IP55 degree of protection. The connection must be provided by
the customer.
In the basic version, the brake has three emergency release
screws; these are axially accessible from the front. The integrated or built-on microswitch can be incorporated in a higherlevel control system as either an NC or an NO contact. The fast
switching rectifier in the terminal box for the holding brake is
used to over-excite the coil to release the brake and to achieve
short release times. Release current = 2 holding current

The holding brake does not have its own bearings; the output
forces are therefore absorbed by the motor bearings. Due to limitations of space and their high radial forces, belt pulleys cannot
be attached. When selecting the coupling to couple to the motorbrake combination, it should be carefully noted that the shaft
extension diameter is larger than the diameter of the motor shaft
extension.
The electromagnetic holding brake operates in accordance with
the quiescent current principle, i.e. when current is flowing, the
brake is released electromagnetically and when no current is
flowing, the braking effect is achieved through the spring force.
Motor

Holding
brake

Type

Type

Holding
torque
(tolerance
20 %)

Nm (lbf -ft)

Speed, Single Service Coil

max.
switch- life
curing
switch- rent
energy, ing
perm. energy
nmax.

WE

Wmax.

rpm

kJ

MJ

Shaft extension
dimension
DIN 748

Length

mm (in)

mm (in)

Cantilever
force, perm.
(3000 rpm,
xmax.)

Moment
of inertia
of brake

Open- Closing
ing
time
time

Weight,
brake

J
N (lbf )

kgm2 (lbf-in-s2) ms

ms

kg (lb)

Brake supply voltage 230 V AC, 50 to 60 Hz

1PH7184 NFE 60
1PH7186 NFE 60/80

600 (443)
800 (590)

3500

69
91

154
56

0.9

90 (3.54) 90 (3.54) 2800 (629.47) 0.027 (0.24)

0.026 (0.23)

400

160

55 (121)

1PH7224 NFE 100

1000 (738) 3100
1PH7226 NFE 100
1000 (738)
1PH7228 NFE 100/140 1400 (1033)

158
206
248

153
109
32

1.3

100 (3.94) 100 (3.94) 2800 (629.47) 0.041 (0.36)

0.041 (0.36)
0.041 (0.36)

460

200

75 (165)

Speed nmax.:
Max. permissible speed at which an emergency stop is possible.
Single switching energy, perm. WE:
Perm. switching energy for emergency stop
WE = Jtot. n2/182.5 x 10-3 (J in kgm2, n in rpm)
Service life switching energy Wmax.:
Max. possible switching energy of the brake (for emergency stop) until
the brake linings must be replaced. Wmax. = WE z
Number of emergency stops z:
The number of emergency stops refers to the following conditions:
Braking from speed nmax., Jtot. = 2 Jmot.
A conversion can be made for operation under different conditions:
Number of emergency stops z = Wmax./WE
Coil current I:
Current in order to maintain the brake in a released condition.
Release current = 2 holding current
Permissible radial force:
Only coupling output is permissible.
Opening time:
Separating time until the brake opens. The values refer to the maximum
braking torque.
Closing time:
Interlocking time until the brake closes. The values refer to the maximum
braking torque.

Siemens PM 21 2011

5/107