Screw Pumps

SN Series

Utilization
The SN series from ALLWEILER is utilized in all segments of
industry where lubricating liquids are pumped that do not
contain abrasive components and will not chemically attack
the pump materials. Pumped liquids include a variety of oils
and oil products (including heating, lubricating, hydraulic oils
and bitumen), greases, chemical products like polyols,
isocyanates, paints, lacquers, adhesives, glycerin, resins, and
other lubricating media like paraffin, wax, soap, viscose,
cellulose pulp, glucose, syrup, salves, pastes, and more.
Main fields of application
Main fields of application are oil-firing and power engineering;
hydraulic, maritime, and offshore engineering; machine tools;
the chemical and petrochemical industries, the food industry,
and the pulp and paper industry.
Design
The SN series is a three-screw, self-priming screw pump with
hardened and ground spindles that rotate in a replaceable
casing insert.
The idler screws are hydraulically driven and axial thrust is
fully compensated hydrostatically. A groove ball bearing
lubricated with the pumped liquid or an external greaselubricated groove ball bearing holds the drive screw in place.
The shaft is sealed with either shaft seal rings or mechanical
seals. A return pipe connects the seal chamber with the
suction chamber. As a result, regardless of the current
discharge pressure, only the suction/inlet pressure will affect
the shaft seal.
Performance data c2
Capacity
Discharge pressure
Inlet pressure
Liquid temperature

Q
pd
ps
t

up to
up to
up to
up to

5.300 l/min e
bar f
64
bar
10
C g
+150

c The performance data overview is based on drive speeds that occur

when using three-phase motors in a 50-Hz power grid. Refer to the
proposal and order confirmation for exact operation limits.

d The specified operation limits are maximum values that may have to be
reduced in individual cases depending on technical variations. Refer to
the respective order documentation for binding values.

e Capacity of 3600 l/min is standard; 5300 l/min in a special version.

f Pressure limits depend on the casing material.
g Specified temperature limits depend on the seal. Please consult your
ALLWEILER representative
specified range.

regarding

temperatures

above

the

Functionality
Specially-shaped thread flanks cause the three spindles to
form sealed chambers; rotation of the spindles then causes
the contents of the chambers to move continuously in the axial
direction from the pump's suction side to its pressure side.

Despite rotation of the spindles, no turbulence results.

Constant chamber volumes eliminate squeezing forces,
thereby delivering virtually pulsation-free operation.
Flanges
Suction
branch:
Discharge
branch:

up to DN 150 according to DIN EN 1092-2 PN 16

up to DN 200 according to DIN EN 1092-2 PN 10
PN 40 according to DIN EN 1092-2 (pump casing
in EN-GJL-250)
PN 64 according to DIN EN 1092-2 (pump casing
in EN-GJS-400-15)

Other flanges (such as ANSI-B 16.1 or 16.5, SAE, JIS, BS etc.)

are available upon request.
Shaft coupling and safety guarding
When the scope of delivery includes a pump, base plate, and
shaft coupling (according to DIN 740), or if a motor bracket or
wall-mounted/foot-mounted motor bracket are provided, then
safety guarding according to DIN EN 294 will also be included.
Compliance with DIN EN 809 safety requirements is ensured.
Shaft sealing
Mechanical seal,
uncooled
Model code
Rotating ring
Counter ring

unbalanced
6.7 and 12.1
silicon
carbide
hard carbon
antimony
impregnated
CrNiMo steel
Viton

6.9 and 8.9

silicon
carbide
silicon
carbide

Metal parts
CrNiMo steel
O-rings
Viton
Material code
AQ1VGG
Q1Q1VGG
DIN EN 12 756
Max. inlet pressure
10 bar c
D
80 C
Permissible liquid
E
120 C
temperature with
bearing version
U
150 C
Other mechanical seals available upon request
Shaft seal rings
uncooled
Model code
(D) 4.2
4
Shaft seal ring material
Perbunan (NBR)
Gylon
Max. inlet pressure
1.5 bar c
Permissible liquid
80 C
temperature
c Maximum permissible inlet pressure is dependent on discharge
pressure, the liquid being pumped, viscosity, speed, and pump size.
Please consult your ALLWEILER representative.

SN Series
Bearing and lubrication
Bearing
Version
U

Description

Internal ball bearing, lubricated by pumped liquid,

shaft seal uncooled, unheated

Noise levels
The pump design provides gentle, uniform movement of the
liquid with low noise levels. The noise level lies between 50
and 100 dBA, depending on speed, pump size, and
installation.

External ball bearing, lifetime sealed, cannot be

relubricated, shaft seal uncooled, unheated
External ball bearing, lubricated through grease
E
nipple with grease regulator, shaft seal
uncooled, unheated
Internal ball bearing, lubricated with pumped
Q
liquid, no shaft seal
External ball bearing, lifetime sealed, cannot be
DQ
relubricated, no shaft seal
Other bearing designs upon request
D

Heating
Series

electric

with steam or heat transfer liquid

Heating
element
(vers. E)

Heating
shell
(vers. X)

Heating
cartridge
(vers. P)

SNH/SNGH

SNF/SNGF

SNS/SNGS

Heating
jacket
(vers. Y)

The provided specifications are reference values. Actual

airborne sound level depends strongly on the installation
conditions!
Model code
SN H 40 E R 46 U 4 QM E W1

Note: Pumps in double jacket only in welded-steel (special)

version.

Series
Construction type

Pressure relief valves

These pumps can be delivered with built-on pressure relief
valves (see page 9). This brochure does not provide valve
characteristic curves and sectional drawings; these must be
requested separately.
If pumps are requested without an installed pressure relief
valve, overload protection must be provided in the controller or
as a pipeline-mounted valve (see separate brochure).
Drive
The pumps can be coupled to different types of electric motors
or to other drive machines either directly (series SNH, SNGH),
by way of a motor bracket (series SNS, SNGS), or by way of
wall-mounted or foot-mounted brackets (series SNF, SNGF).
In most cases, the pumps are meant for use with surfacecooled three-phase squirrel-cage motors, design type B3 or
V1; degree of protection IP 55 according to IEC standard,
insulation class B, motor windings for 400 V, 50 or 60 Hz.
Explosion protection
The pump fulfills the requirements according to EU
explosion-protection directive 94/9/EC (ATEX 100a)
for devices in device class II, category 2 G.
Classification into temperature classes according to EN
13463-1 depends on the temperature of the pumped liquid.
Refer to the proposal or order documentation for the maximum
permissible liquid temperature for the respective temperature
classes.
Note: When operating the pump in category 2, suitable
measures must be provided to prevent impermissible warming
of the pump surfaces in the event of disturbance.

Size c
Drive screw type
Screw pitch
(R=right/L=left)
Screw pitch angle in degrees
Bearing type
Shaft seal
Shaft seal annex (optional)
Casing heating
Material code
c theoretical capacity expressed in l/min. at normal pitch
Installation types and modular system
Three-screw pumps, SN type series.
Uniform pumping elements with differing types of construction
and installation.

SN Series
Materials
Description
Pump casing
Casing insert
Pump cover, nondrive end
Pump cover, drive
end
Drive and idler
screws
Balance bushes

Materials
W61
W33
EN-GJL-250
EN-GJS-400-15
EN-GJL-250
SIL 70 (Silafont)

W67
EN-GJS-400-15
EN-GJL-250

W22 c
welded steel
EN-GJL-250

EN-GJL-250

EN-GJL-250

EN-GJS-400-15

EN-GJS-400-15

steel

EN-GJL-250

EN-GJL-250

EN-GJL-250

steel

steel

steel

16MnCrS5
(nitrided steel
1.7139)
AlMgSi1
3.2315

16MnCrS5
(nitrided steel
1.7139)
AlMgSi1
3.2315

16MnCrS5
(nitrided steel
1.7139)

16MnCrS5
(nitrided steel
1.7139)
AlMgSi1
3.2315

16MnCrS5
(nitrided steel
1.7139)

16MnCrS5
(nitrided steel
1.7139)
AlMgSi1
3.2315

W1
EN-GJL-250
EN-GJL-250

W2
EN-GJL-250
SIL 70 (Silafont)

EN-GJL-250

EN-GJL-250

EN-GJL-250

c refer to page 11 for additional information about the welded steel version.
NPSH values
NPSHreq. [m] at = 40 mm/s incl. 0.5 m safety margin. Values applicable to air-free liquids.
Please consult your ALLWEILER representative about liquids containing undissolved air.
Grid frequency
Motor speed
40-38
40-46
40-54
80-36
80-42
80-46
80-54
120-42
120-46
120-54
210-40
210-46
210-54
280-43
280-46
280-54
440-40
440-46
440-52
440-54
660-40
660-44
660-46
660-51
660-54
940-42
940-46
940-50
940-54
1300-38
1300-42
1300-44
1300-46
1300-54
1700-42
1700-46
2200-42
2200-46
2900-40
3600-46
c inlet pressure required

50 Hz
1450 1/min
3.0
3.0
5.4
3.0
3.0
3.0
5.5
3.0
3.0
5.5
3.0
3.0
5.7
3.0
3.0
5.8
3.0
3.0
5.9
6.1
3.0
3.0
3.1
6.2
6.5
3.0
3.5
6.4
6.9
3.0
3.3
3.6
4.0
7.5
3.8
4.6
4.4
5.3
4.8
6.9

60 Hz
2900 1/min
3.0
3.0
5.9
3.0
3.0
3.0
6.5
3.0
3.4
6.9
3.2
4.5
8.1
4.3
5.3
4.6
6.9
c
6.1
7.7
c
8.0
c
7.4
c
-

1750 1/min
3.0
3.0
5.5
3.0
3.0
3.0
5.6
3.0
3.0
5.7
3.0
3.0
6.0
3.0
3.0
6.2
3.0
3.2
6.4
6.6
3.0
3.6
3.9
6.8
7.3
3.6
4.6
7.2
8.1
3.4
4.2
4.8
5.4
5.0
6.6
6.0
7.6
6.7
-

3500 1/min
3.0
3.0
6.4
3.0
3.1
3.8
7.2
3.6
4.5
8.2
4.2
6.0
5.8
7.5
6.4
c
8.7
c
-

Note: Exact NPSHreq. values depend on the individual viscosity and pump speed. Refer to the NPSH characteristic curves for this
information.

SN Series
Performance table (viscosity v = 40 mm2/s)
Grid frequency

50 Hz

Pressure [bar]
Motor speed
40-38
40-46
40-54
80-36
80-42
80-46
80-54
120-42
120-46
120-54
210-40
210-46
210-54
280-43
280-46
280-54
440-40
440-46
440-52
440-54
660-40
660-44
660-46
660-51
660-54
940-42
940-46
940-50
940-54
1300-38
1300-42
1300-44
1300-46
1300-54
1700-42
1700-46
2200-42
2200-46
2900-40
3600-46

Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]
Q [l/min]
P [kW]

20

60 Hz
40

64

20

40

2900
1/min

1450
1/min

2900
1/min

1450
1/min

2900
1/min

1450
1/min

2900
1/min

1750
1/min

3500
1/min

1750
1/min

3500
1/min

1750
1/min

3500
1/min

1750
1/min

3500
1/min

30.7
0.42
40.9
0.5
54.5
0.63
56.2
0.7
68
0.8
80.4
0.9
106
1.13
96.5
1.19
115
1.35
152
1.68
165
1.97
207
2.33
274
2.92
241
2.92
274
3.19
364
3.97
343
4.17
436
4.96
510
5.63
571
6.13
531
6.3
603
6.93
653
7.34
770
8.38
878
9.28
773
9.16
931
10.5
1053
11.6
1237
13.1
921
11.3
1097
12.8
1175
13.5
1279
14.4
1696
17.9
1469
17.2
1705
19.2
1916
22.5
2215
25
2823
33.4
3523
39.3

62.6
1.13
83.5
1.31
112
1.55
114
1.81
139
2.02
164
2.23
216
2.68
196
3.11
233
3.41
310
4.07
334
5.06
419
5.78
557
6.96
489
7.53
555
8.08
738
9.64
694
10.8
882
12.4
1036
13.8
1072
16.2
1218
17.5
1318
18.3
1560
20.4
1776
22.2
1563
23.5
1878
26.1
2132
28.3
2500
31.4
1856
29.7
2215
32.7
-

28.0
1.21
37.2
1.57
48.6
2.06
51.7
2.15
61.8
2.57
74.3
2.98
96.1
3.88
88.6
3.69
107
4.31
140
5.62
156
6.19
195
7.63
255
9.99
227
9.11
259
10.2
340
13.3
328
12.9
416
16.1
477
18.8
538
20.8
511
19.8
575
22.3
625
24
726
28.1
834
31.7
738
28.9
896
34.2
996
38.5
1180
44.7
888
34.7
1052
40.8
1130
43.4
1234
46.8
1624
61.1
1414
54.6
1649
62.4
1849
71.2
2148
81.2
2730
105
3430
128

59.9
2.73
79.7
3.44
106
4.41
110
4.72
133
5.55
157
6.38
206
8.18
189
8.1
225
9.33
297
12
325
13.5
407
16.4
538
21.1
475
19.9
540
22.1
714
28.3
678
28.3
861
34.7
1003
40
1052
43.2
1191
48.2
1291
51.5
1516
59.9
1732
67.1
1527
62.9
1843
73.5
2075
82.2
2443
94.5
1823
76.5
2170
88.6
-

24.8
2.28
32.8
2.99
41.6
3.96
46.5
4.09
54.8
4.92
67.2
5.75
84.8
7.55
79.5
7.02
97.9
8.25
125
10.9
146
11.8
180
14.7
232
19.4
210
17.4
242
19.6
313
25.8
311
24.6
392
31
439
36.3
500
40.3
488
37.8
543
42.8
593
46.1
675
54.5
696
55.2
854
65.7
930
74.5
850
65.9
1000
78
1078
83.2
1182
90.1
1349
104
1585
120
1772
136
2071
156
2621
201
3321
247

56.7
4.86
75.4
6.28
98.8
8.23
105
8.6
125
10.3
150
11.9
195
15.5
179
14.8
216
17.2
283
22.5
315
24.8
393
30.5
515
40
457
36.5
523
40.8
687
53.3
661
51.7
837
64.4
964
75
1028
79.3
1159
89.2
1259
95.9
1465
113
1681
127
1486
116
1801
137
2009
154
2377
179
1785
139
2118
163
-

21.3
3.56
28
4.69
40.8
6.42
46.9
7.75
59.4
9.08
69.4
11
87.9
13
134
18.6
165
23.2
191
27.3
223
30.8
292
38.6
365
48.8
462
59.5
808
103
-

53.2
7.41
70.6
9.68
91.2
12.8
99
13.3
118
15.9
143
18.6
183
24.3
169
22.8
206
26.7
267
35.1
303
38.3
377
47.5
490
62.6
439
56.3
504
63.3
657
83.2
642
79.7
811
100
922
117
1002
123
1124
138
1223
149
1440
179
1756
212
1935
240
1743
214
2060
252
-

37.3
0.54
49.7
0.65
66.4
0.79
68.2
0.89
82.6
1.02
97.6
1.14
129
1.41
117
1.53
139
1.72
185
2.11
200
2.52
251
2.95
333
3.66
293
3.73
332
4.06
441
5
416
5.34
529
6.3
619
7.1
692
7.71
643
8.06
730
8.81
791
9.31
934
10.6
1064
11.7
937
11.7
1127
13.3
1276
14.6
1499
16.5
1114
14.5
1329
16.4
1423
17.2
1548
18.2
2053
22.5
1778
22
2062
24.4
2318
28.8
2680
31.8
3416
42.8
4261
49.8

75.9
1.52
101
1.73
135
2.02
138
2.39
168
2.65
198
2.9
262
3.44
238
4.11
282
4.48
375
5.27
404
6.66
507
7.53
674
8.95
592
9.94
671
10.6
893
12.5
838
14.3
1066
16.2
1296
21.4
1473
22.9
-

34.6
1.5
46
1.93
60.4
2.52
63.8
2.65
76.5
3.15
91.5
3.65
119
4.74
109
4.55
132
5.29
172
6.87
191
7.61
238
9.35
313
12.2
278
11.2
317
12.5
418
16.3
401
15.9
508
19.7
586
22.9
659
25.4
623
24.4
703
27.4
763
29.4
890
34.4
1020
38.7
901
35.5
1092
41.9
1219
47.2
1442
54.6
1082
42.8
1284
50.1
1378
53.2
1503
57.4
1982
74.7
1723
67
2007
76.5
2252
87.5
2613
99.5
3322
129
4167
157

73.1
3.44
97.3
4.3
129
5.48
134
5.91
162
6.91
192
7.91
252
10.1
230
10.1
274
11.6
363
14.8
395
16.9
495
20.3
655
26
577
24.9
656
27.5
869
35.1
823
35.5
1046
43.1
1275
54
1445
60
-

31.4
2.79
41.6
3.64
53.5
4.82
58.5
4.99
69.4
5.99
84.4
7
108
9.17
100
8.57
122
10.1
158
13.2
181
14.4
224
17.9
291
23.6
261
21.2
300
23.8
390
31.3
383
30
484
37.7
548
44.1
621
48.9
600
46.1
671
52.1
731
56.1
838
66.2
969
74.9
860
67.3
1050
80
1153
90.5
1375
105
1044
80.4
1232
95
1326
101
1451
110
1898
144
1658
127
1943
146
2174
166
2535
190
3214
244
4059
301

69.9
6.01
93
7.72
122
10.1
129
10.6
155
12.6
185
14.6
241
19
221
18.2
265
21.1
348
27.5
385
30.5
480
37.4
632
48.8
560
44.8
639
50.1
842
65.2
806
63.6
1022
79
1252
97.5
1413
110
-

27.9
4.33
36.8
5.7
52.8
7.8
61.6
9.4
76.6
11
90.1
13.4
112
15.8
169
22.6
209
28.1
242
33.2
282
37.4
364
46.9
457
59.2
574
72.2
814
105
1002
126
1174
149
1588
199
2089
260
-

66.4
9.1
88.2
11.8
115
15.6
123
16.2
147
19.4
177
22.6
228
29.6
211
27.8
255
32.6
332
42.7
373
46.8
465
57.9
607
76.1
541
68.8
620
77.2
812
101
787
97.4
995
122
1226
150
1378

Note: Refer to proposal or contract documentation for exact performance data at individual operating points.

64

1450
1/min

SN Series
List of components
Description
Pump casing
Casing insert c
Pump cover, drive end
Pump cover, non-drive end or
round foot (on SNS/SNG)
Stuffing box casing/bearing cover
Pump foot
Cover plate
Balance bush c
Seal cover/gland
Greasing chamber disc
Drive screw c
Idler screw c
Spacer bush
Pressure spring
Pipe
Gasket c
Gasket c
Round seal ring
Gasket c
Gasket c

Part No.
1
2
3
4
5
6
7
8
9
10
12
13
16
19
20
21
22
23
24
25

Description
Gasket c
Seal ring c
Seal ring c
Groove ball bearing c
Circlip
Supporting washer
Circlip
Ball
Key
Spring dowel
Screw plug
Screw plug
Stop screw
Screw plug
Grease nipple
Cheese head screw
Cheese head screw
Cheese head screw
Cheese head screw
Cheese head screw
Hexagon head screw

Part No.
26
27
28
34
35
36
37
40
41
42
46
47
48
49
50
51
52
53
54
55
57

Description
Part No.
Cheese head screw
79
Spacer ring
80
Supporting washer
81
Mechanical seal c
83
Shaft seal ring c
107
Support ring
108
Spacer bush
109
Hexagon screw
110
Heating chamber/heating shell 120
Gasket c
121
Cheese head screw
122
Screw plug
123
Seal ring c
124
Gasket
125
Heating element
126
Cheese head screw c
127
Thermostat
129
Seal ring
130

c available as spare part

Pump sectional drawing

SNH, U version, internal bearing, mechanical seal, size 40-660

Note: Series SNE, SNEF, SNGH, SNF, SNGF, SNS and SNGS are not shown explicitly because they differ only in how they are installed.
.
5

SN Series
Sectional drawings, internal bearing

SN..ER..U, internal bearing, mech. seal, sizes 940-3600

SN..ER..U3, internal bearing, 2 shaft seal rings

Sectional drawing of external bearing

SN..ER..D, external bearing, cannot be relubricated, mech. seal

SN..ER..E, external bearing, can be relubricated, mech. seal

SN Series
Sectional drawing of heating

SN..ER.., heating version X (heating shell)

SN..ER.., heating version P (heating cartridge)

SN..ER.., heating version E (electric heating elements)

SN..ER.., heating version Y (double jacket, only for welded steel

version)

Pump dimensions and installation plan

Pump and unit dimensions of all series can be generated and retrieved individually through ALL2CAD.
ALL2CAD is available online at the ALLWEILER service portal at http://service.allweiler.de .

SN Series
Heating c
Series SNH, SNF, SNS, SNGS:

Pump size

40
80
120
210
280
440
660
940
1300
1700
2200
2900
3600

Version X
(heating shell)

Version P
(heating
cartridge)

Connection
( in inches)

Connection
( in mm)

G 1/4
G 1/4
G 1/4
G 1/4
G 3/8
G 3/8
G 3/8
G 3/8
G 1/2
G 1/2
G 1/2
G 1/2
G 1/2

18
18
18
18
18
18
22
22
22
22
22
22
22

c not applicable for welded version

8

Version E = with heating elements, electric

Version P = with heating cartridge for steam or heat transfer liquids
Version X = with heating shell for steam or heat transfer liquids

Version E (with heating elements, electric)

Heating output
[W] (2 heating
elements)
240
260
300
420
460
460
680
880
1000
1340
1340
1600
1600

Connection
( in inches)
G 3/4
G 3/4
G 3/4
G1
G1
G1
G 1 1/4
G 1 1/2
G 1 1/2
G2
G2
G2
G2

Heat-up time of the pump in minutes, for T =

25 C

50 C

75 C

100 C

60

120

240

320

SN Series
Pressure relief valves
Pressure relief valves, installed on SNH, SNF, SNS, SNGS, SNGF series pumps (not welded versions), valve versions in materials
EN-GJL-250 and EN-GJS-400-15; see dimension drawings from ALL2CAD (http://service.allweiler.de) for valve dimensions.

Pump
size
40
80

Max. permissible
capacity
200
200
210

120

550
210

210

280

550

Max. permissible
working
pressurec
0-38
38-58
0-38
38-58
0-38
0-44
0-98
0-38
0-44
0-98
0-13.5
13.5-38

900
0-98
0-13.5
13.5-38

440

900
0-98
0-13.5
13.5-38
900
0-98

660

0-18
1800

0-98
0-13.5
13.5-38

900
0-98

940

0-18
1800

0-98
0-16

1300

2500

1700

2500

2200

2500

2900

3600

3600

3600

0-98
0-16
0-98
0-16
0-98
0-9
0-98
0-9
0-98

Valve
type

Valve
construction

Return connection

DS 35 d
DT 35 d
DS 35 d
DT 35 d
DS 41
DS 38 e
DVI 38 e
DS 41
DS 38
DVI 38 f
DS 44
DT 44
DV 44
DVI 44
DVS 44
DS 44
DT 44
DV 44
DVI 44
DVS 44
DS 44
DT 44
DV 44
DVI 44
DVS 44
DS 47
DV 47
DVI 47
DS 44
DT 44
DV 44
DVI 44
DVS 44
DS 47
DV 47
DVI 47
DS 50
DV 50
DVI 50
DVS 50
DS 50
DV 50
DVI 50
DVS 50
DS 50
DV 50
DVI 50
DVS 50
DS 56
DV 56
DVS 56
DS 56
DV 56
DVS 56

A Bd C Dd

Pipe thread G 1

A Bd C Dd

Pipe thread G 1
Pipe thread G 1

ABCD

Pipe thread G 1 1/2

Pipe thread G1

ABCD

DT = Pressure relief valve with cup springs, directly

controlled.
DV = Pressure relief valve, directly pilot-operated
DVI

= Pressure relief valve, indirectly pilot-operated

Pipe thread G 1 1/2

DVS = Pressure relief valve, pilot-operated, ship
version for vertically installed pumps

ABCD
-B-D

DS = Pressure relief valve with helical spring,

directly controlled.

PN 16 DIN EN 1092-2
DN65

A = Circulating valve
B = Circulating valve with manual regulation

ABCD
-B-D

PN 16 DIN EN 1092-2
DN65

C = Return valve

PN 16 DIN EN 1092-2
DN65

c only return valve (type C or D) allowed for

differential pressure more than 40 bar

PN 16 DIN EN 1092-2
DN80

d valve types DS 35 and DT 35 with manual

regulation (types B and D) cannot be used with
pump types SNS 40 and SNS 80

PN 16 DIN EN 1092-2
DN65

e on pump type SNS 120, valve types DS 38 and

DVI 38 can be used only with intermediate piece
(between pump casing and round foot)

PN 16 DIN EN 1092-2
DN80

f on pump type SNS 210, valve type DVI 38 can

be used only with intermediate piece (between
pump casing and round foot)

D = Return valve with manual regulation

ABCD
-B-D
ABCD
-B-D
ABCD
-B-D
ABCD
-B-D
ABCD
-B-D

PN 16 DIN EN 1092-2
DN100

ABCD
-B-D

PN 16 DIN EN 1092-2
DN100

ABCD
-B-D
ABCD
-B-D
ABCD
-B-D

PN 16 DIN EN 1092-2
DN100
PN 16 DIN EN 1092-2
DN125
PN 16 DIN EN 1092-2
DN125

SN Series
Benefits of SN series

Replacing insert unit while pump

casing is installed is quick and
easy.

Optional direct attachment of

a pressure relief valve as
overload protection
increases operational
reliability.

Hardened and ground

screws provide for long
service life.

Substantially dimensioned ball

bearings make the pump
universally applicable in a wide
range of viscosities.

Modular system enables

lower spare parts stocks
and other design types.

A variety of material
combinations enable
variable adaptation to
special operating conditions.

10

Balance pistons on the screws

reduce wear and ensure minimal
loads on the actuation system by
balancing out axial thrust.

Application-specific shaft seals

(shaft sealing rings, various
mechanical seals, or magnetic
coupling) increase flexibility.

The SN series fulfills the

requirements according to EU
explosion protection directive 94/9/EG (ATEX 100a).

A variety of sizes and screw pitch

angles provides for fine capacity
gradation and optimized
efficiency across the entire
performance range.

Other versions of the SN Series

Other versions of the SN series
In addition to the versions described above, other application
types, materials, shaft seals, bearings, quenches and special
spindle versions are available.
The most common variations are described briefly below.
More extensive information about this and all other variations
is available upon request.
SN series in welded steel version
Special features:





flanges according to DIN and ANSI are available

API 676 version is available
heating with double jacket is available
Only pressure relief valves for installation in a pipe (see
separate brochure) are possible for pumps in welded-steel
version with double jacket and pumps in welded-steel
version with flanges according to API 676.
Please observe the following diagram with installed pressure limiting valves.
The following diagram is applicable for the welded-steel
versions (without double mantle) of series SNH and SNF
with flanges according to DIN:

SN series in SN..AR..M version with magnetic coupling

Special features:


For applications that require the use of pumps without

shaft seals (such as moving heavy fuel oil in Marine
applications or pumping poisonous, harmful, and odorous
media).
 The magnetic couplings containment can hermetically
seal the pump. Magnetic forces transfer torque from the
motor to the pump within the magnetic coupling.
 Also available with pump casing in EN-GJS-400-15
(material combination W5).
 Maximum liquid temperature of 250 C, maximum viscosity
2000 mm/s.
 Refer to brochure VM 687 for more information.
SN series in SN..AR..D 14 BS-W61 version for pumping
refrigerator oil
Special features:


For pumping lubrication oils with traces of refrigerants

(such as ammonia, Freon, etc.).
 Version without non-ferrous metals in material combination
W61.
 Available in sizes 40 to 1300.
 Maximum capacity of 1700 l/min. (in size 1300-54 at 1450
1/min).
 Standard balanced bellow mechanical seal.
 Also available in hermetically sealed version with magnetic
drive.
 Refer to brochure VM 771 for more information.
SN series in SN..AR..D4.2 QM-W61 version for pumping
isocyanates and polyols
Special features:


The following diagram applies to the SNS series in the

welded-steel version with flanges according to DIN:

For pumping isocyanates and polyols that tend to

crystallize when released into the atmosphere.
 Version without non-ferrous metals in material combination
W61.
 Available in sizes 40 to 1300.
 Maximum capacity of 1700 l/min. (in size 1300-54 at 1450
1/min).
 Maximum viscosity is 6000 mm2/s.
 Shaft seal rings teflonized, with quench.
 Refer to brochure VM 740 for more information.

Additional information in brochures VM 677 and VM 679.

SNC(X), SNG(X), SNFG(X) for installation on gear box

Special features:







External pump for fast-running gear box for pumping

lubrication and gear-box oils. The pumps are driven
directly by the external gear box by way of a pinion pulled
onto the drive screw.
Series SNCX, SNGX, and SNFGX can maintain pumping
for up to an hour in the opposite rotational direction.
The pumps do not have a shaft seal.
Maximum viscosity is 75 mm/s.
Refer to brochure VM 645 for more information.

11

SN Series
Performance overview for three-screw pumps
Other series of three-screw, single-channel screw pumps are available for pumping performance outside of the SN series. Refer to the
following overview (specified performance based on 50-Hz speeds).

Subject to technical changes.

The specified performance data and all standard references are intended
to provide only an overview of the product and its performance! Refer to
the respective proposal and order confirmation for exact operation limits.

ALLWEILER AG
Postfach 1140 78301 Radolfzell
Allweilerstr. 1 78315 Radolfzell
Germany
Tel. +49 (0)7732 86-0
Fax. + 49 (0)7732 86-436
E-mail: service@allweiler.de
Internet: http://www.allweiler.com
VM 617 GB/06.08 ID No. 795 568