Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 286 views

    Test ECM Mode.

    Uploaded by

    Jorge Espinoza
    Test ECM Mode is a diagnostic feature available on Perkins ECMs running software version 8 or higher. It allows technicians to test a suspect ECM by activating the ECM for 24 hours without an engine serial number programmed. To use Test ECM Mode, the technician flashes a new ECM with the correct firmware file, activates it, then monitors engine parameters for 24 hours to diagnose issues. The ECM countdown clock displays remaining time. Technicians can reactivate Test ECM Mode to reset the timer, but once time elapses the ECM can no longer be used for testing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Test ECM Mode.

    Uploaded by

    Jorge Espinoza
    286 views10 pages
    Test ECM Mode is a diagnostic feature available on Perkins ECMs running software version 8 or higher. It allows technicians to test a suspect ECM by activating the ECM for 24 hours without an engine serial number programmed. To use Test ECM Mode, the technician flashes a new ECM with the correct firmware file, activates it, then monitors engine parameters for 24 hours to diagnose issues. The ECM countdown clock displays remaining time. Technicians can reactivate Test ECM Mode to reset the timer, but once time elapses the ECM can no longer be used for testing.

    Original Description:

    pruebas

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Test ECM Mode is a diagnostic feature available on Perkins ECMs running software version 8 or higher. It allows technicians to test a suspect ECM by activating the ECM for 24 hours without an engine serial number programmed. To use Test ECM Mode, the technician flashes a new ECM with the correct firmware file, activates it, then monitors engine parameters for 24 hours to diagnose issues. The ECM countdown clock displays remaining time. Technicians can reactivate Test ECM Mode to reset the timer, but once time elapses the ECM can no longer be used for testing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    286 views10 pages

    Test ECM Mode.

    Uploaded by

    Jorge Espinoza
    Test ECM Mode is a diagnostic feature available on Perkins ECMs running software version 8 or higher. It allows technicians to test a suspect ECM by activating the ECM for 24 hours without an engine serial number programmed. To use Test ECM Mode, the technician flashes a new ECM with the correct firmware file, activates it, then monitors engine parameters for 24 hours to diagnose issues. The ECM countdown clock displays remaining time. Technicians can reactivate Test ECM Mode to reset the timer, but once time elapses the ECM can no longer be used for testing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    Test ECM Mode

    Revision 1.2

    Contents

    1. When was Test ECM Mode available?...................................................................1


    2. When to use Test ECM Mode.................................................................................1
    3. How do I start to use Test ECM Mode?..................................................................2
    4. Programming the Engine Serial Number. Warning!..................................................2
    5. Using Test ECM Mode...........................................................................................4
    6. How to access Test ECM Mode..............................................................................4
    7. Test ECM Mode Screen..........................................................................................5
    8. Activating Test ECM Mode....................................................................................6
    9. Test ECM Mode Clock...........................................................................................7
    10. Terminating Test ECM Mode...............................................................................8
    11. Test ECM Mode Time Remaining Warning.........................................................9
    12. Reactivating Test ECM Mode.............................................................................10
    13. Test ECM Mode Time Has Elapsed....................................................................11

    1. When was Test ECM Mode available?


    Test ECM Mode was available on release 8 Vista software or higher (As a
    guide, the date of the file would be Dec 2002 onwards).

    2. When to use Test ECM Mode


    A Systematic diagnostic processes should be used to identify faults.
    The Fault Finding Guide (FFG) should be used before Test ECM Mode.
    Test ECM Mode should only be used as the final confirmation that the original
    ECM is faulty or not.
    For more information and queries about Test ECM Mode and issues relating to
    the ECM please contact Perkins Technical Support Centre:
    Technical_help@perkins.com
    +44 (0)1733 582858

    3. How do I start to use Test ECM Mode?


    __You will need an ECM which does not have the Engine Serial Number programmed.
    This can be a new ECM or one that has been used for Test ECM Mode previously**.
    __You will need a copy of TIPSS-EST 2002B or later (The Integrated Parts & Service
    System Electronic Service Tool). You will also require a TIPSS communication adaptor.
    __You will need a copy of the ECM flash file (release 8 or later), which is on the
    suspected faulty ECM. This can be downloaded from PTMI (Perkins Technical Marketing
    Information) which is on Perkins secure website.
    If your flash file is earlier than release 8 then you must download a release 8 or later
    version from PTMI.
    **Test ECMs can only be used if their timer has not expired or it has not been terminated by the
    user, in which case the ECM can never be used as a Test ECM again.

    4. Programming the Engine Serial Number. Warning!


    Before the ECMs Test ECM Mode is activated if the user tries to program the
    Engine Serial Number he will be given a warning that this will prevent them from
    using the ECM as a test ECM. This will normally apply to new ECMs that have
    not been used as Test ECMs before. Once Test ECM Mode has been activated
    the engine serial number can be programmed.

    5. Using Test ECM Mode


    To start using the Test ECM Mode, the user must connect to the suspected
    faulty ECM and make a note of the Flash File number. If the flash file number
    cannot be obtained from the suspected faulty ECM then the user must use the
    Engine Serial Number to Search the PTMI system to obtain the correct Flash
    File.
    The user must then remove the ECM plug from the suspected ECM and insert
    into the test ECM. Using EST the user must flash the Test ECM with the correct
    Flash File. Test ECM Mode can now be selected from the Service menu.

    6. How to access Test ECM Mode


    Test ECM Mode can be selected from the Service drop down menu when
    connected to an ECM using the Electronic Service Tool (EST) 2002B onwards.

    7. Test ECM Mode Screen


    Once Test ECM Mode has been selected the screen will display information
    relating to Test ECM Mode.

    8. Activating Test ECM Mode


    Once Test ECM Mode has been activated the Test ECM Mode status will
    display Active.

    9. Test ECM Mode Clock


    Once Test ECM Mode has been activated the Test ECM Time remaining will
    count down from 24Hrs. This is displayed in hours and minutes.

    10. Terminating Test ECM Mode


    If the user selects the Terminate button he will be given a warning, which
    indicates that if they terminate Test ECM Mode this ECM will no longer be able
    to be used as a Test ECM.

    11. Test ECM Mode Time Remaining Warning


    When the time has less than 1hr remaining, the text indicating the time remaining
    will increase in size and more bold. A warning will also be displayed at the bottom
    of the screen that there is less than 1hour test time remaining.

    12. Reactivating Test ECM Mode


    If the user selects Reactivate then the time will be reset to 24hrs. All
    configuration values that may have been modified while in Test ECM Mode will
    be reset to their original values.

    13. Test ECM Mode Time Has Elapsed


    Once Test ECM Mode time has elapsed the ECM can no longer be used as a
    Test ECM. The Test ECM Mode Status will show Inactive and the Test ECM
    Time Remaining will be 00 hours 00 min.

    If the user tries to start Test ECM Mode again then they will be give the following
    message.

    You might also like