The 2003 Audi A4 1.8T Wiring Harness Explained
The 2003 Audi A4 1.8T Wiring Harness Explained
The 2003 Audi A4 1.8T Wiring Harness Explained
Hey guys, thought Id document this for people always trying to figure this
stuff out. This should also help for my 2.7T swap. This is for a 2002 harness
and I am missing a few connectors like SAI and MAF.
Click this bar to view the full image.
MAP Sensor
Connector: Black (4 pin)
1: Black
2: Empty
3: White with black stripe
4: Grey with blue stripe
Oil Level
Connector: Black (3 pin)
1: Black with red stripe
2: Brown
3: Red with green stripe
Thermostat (possibly wrong)
Connector: Black (2 pin)
1: Brown
2: Blue with brown stripe
Lower Coolant Temp Sensor
Connector: Black (2 pin)
1: Yellow with black stripe
2: Blue with black stripe
Throttle Body
Connector: Black (6 pin)
1: Purple with red stripe
2: Green with purple stripe
3: Red with purple stripe
4: Purple with red stripe
5: Brown with purple stripe
6: Grey with brown stripe
A/C Compressor (possibly wrong)
Connector: Black (2 pin)
1: Blue
2: Blue
IAT
Connector: Black (2 pin)
1: Black with red stripe
2: Black
Alternator (possibly wrong)
Connector: Black (2 pin)
1: Green with blue stripe
2: White with green stripe
N112
Connector: Brown (2 pin)
1: Green with yellow stripe
2: Brown with black stripe
N249
Connector: Black (2 pin)
1: Green with yellow stripe
2: Yellow with green stripe
Wideband 02
Connector: Black (6 pin)
1: White
2: Black with white stripe
3: Green with yellow stripe
4: Red with white stripe
5: Brown
6: Grey with green stripe
Rear 02 Sensor
Connector: Brown (4 pin)
1: Green with yellow stripe
2: White with grey stripe
3: Purple
4: Red
Crank Position
Connector: Grey (3 pin)
1: Black
2: Blue
3: Grey
Knock Sensor (Rear)
Connector: Blue (3 pin)
1: Yellow
2: Green
3: Black
Knock Sensor (Front)
Connector: Green (3 pin)
1: White
2: Brown
3: Black
???
Connector: Black (3 pin)
1: Blue with yellow stripe
2: Empty
3: Brown with yellow stripe
Oil Pressure
Connector: Black (1 pin)
1: Yellow
Speed Sensor (Trans)
Connector: Black (3 pin)
1: Empty
2: Brown
3: Brown with red stripe
Other Trans Sensor (??)
Connector: Black (5 pin)
1: Empty
2: Blue with red stripe
3: Black with blue stripe
4: Empty
5: Empty
????
Connector: Black (1 pin)
1: Red with black stripe
VVT Tensioner
Connector: Black (2 pin)
1: Green with blue stripe
2: Yellow with grey stripe
Coolant Temp (Top)
Connector: Black (4 pin)
1: Blue with brown stripe
2: Brown with yellow stripe
3: Black
4: Brown with grey stripe
Cam Position Sensor
Connector: Black (3 pin)
1: White with black stripe
2: Green with grey stripe
3: Black
Injector 1 (Front)
Connector: Black (2 pin)
1: Red with blue stripe
2: Black with green stripe
Injector 2
Connector: Black (2 pin)
3. unused
4. red/black - Ignition/starter switch to ground
5. black/blue - Back up light switch pin 3
6. green/red - control module with indicator unit in instrument panel insert
7. unused
8. green/yellow - connector for fuse 234, connects MAF, N112, N80, N249
9. red/grey - Oil level thermal sensor pin 3 (red/green for 03)
10. unused
T17e, White, 17 pin
1. brown/green - to pin 1 on throttle body
2. yellow/lilac - to pin 2 on throttle body
3. brown/red - to pin 3 on throttle body
4. yellow/blue - to pin 4 on throttle body
5. grey/yellow - to pin 5 on Throttle Body
6. brown - to pin 6 on throttle body
7. unused
8. unused
9. unused
10. blue/green - from pin 38 ECU to steering column electronics module
11. red/black - to pin 4 on brake light switch from ECU
12. white/red - to pin 2 on brake light switch from ECU
13. red/green - to pin 2 clutch vacuum vent valve switch
14. grey/white - from pin 1 on locking relay for starter (clutch pedal switch) to pin 2 on clutch vent
vacuum valve switch
15. black/lilac - from ? to ECU
16. red/grey - from power supply relay to fuse S229 (20A)
17. unused
T17d, Red, 17 pin
1. white/yellow - pin 1 leak detection pump to ECU
2. grey/red - pin 2 leak detection pump to ECU
3. unused
4. unused
5. blue/brown - ? (03)
6. lilac/blue - to airbag control module from pin 67 ECU
7. unused
8. unused
9. unused
10. red/blue - to pin 5 on fuel pump relay
11. red/white - to ECU pin 24 to coolant fan control module
12. unused
13. orange/brown - Wire connection (low-bus)
14. orange/black - Wire connection (high-bus)
15. blue/red - reverse lamp connector
16. unused
17. unused
************************************************** ************************************************
2004 B6 S4 4.2 harness
T10, Black, 10 pin
1. blue generator ???
2.
3. white/green from instrument panel to F1 (oil pressure switch)
4.
5.
6. brown/yellow from pin 3 on F66 (Engine Coolant Level Warning Switch) to ground 269
7. blue/yellow from J285 (dash) to pin 1 on F66 (Engine Coolant Level Warning Switch)
8.
Here's an example of what's in the manual. You have to practice using the guide it has
leading in to the wiring diagram section to be able to read it easily, but it's worth it. My trans
swap would have been a nightmare without it, or I probably would have just bypassed the