Schedule of Rates 2011 (Rev1)

Negeri Sabah
State of Sabah
Jabatan Kerja Raya

Public Works Department
Jadual Kadar Harga Bagi

Kerja-Kerja Bangunan
(termasuk Kerja-Kerja Luar)
Schedule of Rates for Building
Works
(including External Works)
Pengarah Kerja Raya

- SR/1 -
Ibu Pejabat JKR

Kota Kinabalu
DISEMBER 2011
- SR/2 -
Isi Kandungan
Table of Content
Bil.
Huraian
Mukasurat
Piling
SR/5-11
Excavator
SR/12-13
Concretor
SR/14-16
Bricklayer
SR/17
Drainlayer
SR/18-20
Roofer
SR/21
Carpenter and Joiner
SR/22-24
Ironmongery
SR/25-26
Steel and Ironworker
SR/27-30
10
Pavior, Plasterer and Tile Fixer
SR/31-32
11
Plumber
SR/3341
12
Glazier
SR/42
13
Painter
SR/43
14
Road, Culvert, Fencing, Turfing and

Roadside Drains
SR/44-48
15
Electrical
SR/49-131
16
Mechanical
SR/132-145
17
Dayworks
SR/146-147
- SR/3 -
Negeri Sabah, Malaysia

State of Sabah, Malaysia
Jabatan Kerja Raya
Public Works Department
Jadual Kadar Harga Bagi Kerja-Kerja Bangunan
(termasuk Kerja-Kerja Luar)
Schedule of Rates for Building Works
(including external works)
1.
This Schedule of Rates shall form part of the Contract for : .......
......................................
.............................................................................
and
shall
be
read
in
conjunction with the General Specifications and any addendum or appendices hereto.
2.
The tenderer shall insert in the space provided against each item the percentage increase or
decrease for Dayworks Rate which he requires to be applied to the rates in this Schedule.
3.
The percentages increase or decrease inserted by the tenderer for Dayworks rate shall be
rationalised to reflect the current market prices and shall be subject to the agreement with the
S.O. as to their reasonableness and subject to such agreement, shall be used as a Schedule of
Rates for calculating the cost of any variation which may be ordered in accordance with the
term of the contract.
4.
This Schedule of Rates duly filled in (or amended) and signed must be returned together with
the Tender Form.
5.
All rates herein shall held to include for waste on materials, carriage and cartage, carrying in
and return of empties, hoisting, setting, fitting and fixing in position, making and all other
labours and everything else necessary (including any customs duty, etc.) for the proper
completion of each item and for establishment charges and profit.
6.
Rates for excavation (including excavation for drainage) are to include for keeping all
excavations free from water, mud, etc. by pumping or bailing if required and for planking and
strutting, levelling, ramming or preparing bottoms, any double handling required and for
additional excavation for planking and strutting and formwork.
7.
Rates for concrete shall be held to include for forming, leaving or cutting grooves, chases,
mortices, holes and making good and any sundry items of a like nature.
8.
Rates for formwork shall be held to include for erection, raking and circular cutting, splayed
edges, notchings, allowance for overlaps and passing at angles, battens, strutting, bolting,
wedging, easing, striking and removal.
9.
Rates for brickwork and blockwork shall be held to include for all rough and fair cutting, oversailing and receding courses, rough relieving and discharging arches, wedging and pinning,
raking out joints for and pointing flashings, bedding plates, bedding and pointing frames,
parging and coring flues, labour caves filling, plumbing angles, forming square and rebated
reveals, cut squints or bird-mouths, notches, forming, leaving or cutting chases, holes and
mortices and cutting and pinning and making good any other sundry items of a like nature.
Rates for each item of paving shall be held to include for all rounded angles, arises and
making good and any other sundry items of a like nature.
10.
11.
Rates for each item of skirtings, risers, channels and the like shall be held to include for all
- SR/4 -
short lengths, formed, cut and purpose made angles, junctions, ends, etc. and making good
and any other sundry items of a like nature.
12.
Rates for all carpentry timber are to include for all labour to notchings, halvings, morticing,
tensioning and wedging, scarfing, dovetailing, sinking for heads of bolts and nuts and
trimming for openings.
13.
Rates for each item of joinery shall be held to include for all cuttings, notchings, holes housing
ends, mitring ends and shaped ends, angles, junctions, heading joints, short lengths and any
other sundry items of a like nature.
14.
Rates for plastering, rendering, etc. shall include for raking out joints of brickwork, blockwork
and masonry or hacking concrete as key.
15.
Overall rates of each item of plastering, etc. shall be held to include for narrow widths and
small quantities, temporary rules, joints between different types of plastering, internal angles,
arises, rounded coves and external angles not exceeding 1" radius, and mitres, stopes etc. on
cornices, mouldings, enrichments, coves, skirtings, gutters and strings, all making good and
any other sundry items of a like nature.
16.
Rates for mild steel tubing are to include all short running lengths, sockets, backnuts, elbows
and bends.
17.
Rates for driving of pressure-treated timber piles shall include for the provision of all necessary
mechanical plant, rig, temporary works, timber, etc. transporting to site, erecting, dismantling
removal on completion and also for travelling of pile frame about the site.
18.
Rates for driving of precast concrete piles and reinforced concrete extension piles shall include
for travelling of pile frame about the site.
19.
20.
Provide always, the use of this Schedule of Rates shall be limited to variations which
are minor in nature. For extensive and sizeable variations involving large quantities, the S.O.
shall review the relevant rates contained herein before issuing the variation order and
reasonable reduction in the rates shall be agreed between the Contractor and the S.O.
20.
Abbreviations :nr
m
m2
m3
kg
pr
N.A.
=
=
=
=
=
=
=
Number
Metre
Metre Square
Metre Cube
Kilogram
Pair
Not Applicable
- SR/5 -
TAMBAHAN PERATUSAN
Kadar-kadar harga yang terkandung di dalam Jadual Kadar Harga ini adalah berasakan
kepada nilai kerja semasa di Daerah Kota Kinabalu. Tambahan peratusan bagi DaerahDaerah lain di Sabah dan lokasi-lokasi projek berkanan dari pusat bandar/pekan
pembekal bahan-bahan kerja berkenan adalah seperti Jadual berikut:Tambahan Peratusan Bagi Kerja-Kerja Bangunan-Bangunan Di Sabah.
BANDAR/PEKAN
A
Kurang Dari
10km
Kota Kinabalu
Penampang
Tuaran
Papar
Ranau
Kota Belud
Kudat
Kota Marudu
Pitas
Sandakan
Beluran
Kinabatangan
Tongod
Keningau
Tenom
Tambunan
Beaufort
Sipitang
Kuala Penyu
Tawau
Lahad Datu
Semporna
Kunak
0
0
5
5
10
10
15
15
15
15
15
18
18
10
15
12
12
12
12
15
15
15
15
KUMPULAN
B
C
10-20 km
20-30 km
TAMBAHAN PERATUSAN (%)
2
4
2
4
7
9
7
9
12
14
12
14
17
19
17
19
17
19
17
19
17
19
20
22
20
22
12
14
17
19
14
16
14
16
14
16
14
16
17
19
17
19
17
19
17
19
D
Lebih dari 30
km
6
6
11
11
16
16
21
21
21
21
21
24
24
16
21
18
18
18
18
21
21
21
21
Kawasan-kawasan yang tidak boleh dihubungi melalui jalan raya (JKR Standard Road)
atau kawasan melebihi 80km dari mana-mana pusat bandar/pecan, peratus
pertambahan akan dinilai berasingan.
- SR/6 -
PILING
No.
Item Description
Unit
Rate
(RM)
PRESSURE TREATED TIMBER PILES

1
Supply only 125mm x 125mm pressure treated initial and extension

timber piles.
31.80
Ditto 150mm x 150mm ditto.
37.70
Handle, transport, pitch and drive 125mm x 125mm timber piles.
10.00
12.00
Pointing and shaping end of 125mm x 125mm timber piles

shoeing with and including 3mm thick mild steel welded shoe
125mm x 125mm x 250mm high comprising of pyramid shape
150mm high and socket 100mm high including nailing to timber
(for hard driving only).
nr
15.00
nr
17.00
nr
25.00
nr
27.00
and
size
end
pile
Ditto 150mm x 150mm timber piles ditto 150mm x 150mm x

250mm high, comprising of pyramid shape end 150mm high, ditto.
Mild steel welded extension sleeve or collar size 5mm thick, 120mm x
120mm (internal dimensions) x 450mm long with a seating fillet
welded centrally inside and bevelling ends of piles and slipping same
into and nailing.
Ditto 140mm x 140mm (internal dimensions) x 450 mm long, ditto.
Cut off and remove surplus length 125mm x 125mm timber piles
including treating head and 150mm length of cut off end of pile with
preservative and an approved bituminous compound before encasing
in pile cap.
nr
3.00
10
Ditto 150mm x 150mm, ditto.
nr
4.00
11
Provide all equipment, hydraulic jack, deflection gauges, kentledge,

temporary staging etc. and test initial an initial test pile size 125mm x
125mm to a vertical load test of . KN including all extra costs
before commencement of the main piling works.
Per KN
15.00
12
Ditto and test a successive test pile ditto.
Per KN
13.00
13
Dito size 150mm x 150mm to a vertical load test of ... KN including

all extra costs in setting out and driving one pile before
commencement of the main piling works.
Per KN
15.00
Ditto and test a successive test pile ditto.
Per KN
13.00
14
PRECAST CONCRETE PILES

15
Supply only 150mm x 150mm initial/head pile 6.00m long.
45.00
16
Supply only 150mm x 150mm extension pile 6.00m long.
40.00
17
60.00
PILING (CONTD)
- SR/5-
No.
Item Description
Unit
Rate
(RM)
PRECAST CONCRETE PILES (CONTD)

18
55.00
19
75.00
20
Ditto 9.00m long
73.00
21
Ditto 12.00m long
73.00
22
70.00
23
Ditto 9.00m long.
68.00
24
Ditto 12.00m long
68.00
25
110.00
26
Ditto 9.00m long.
108.00
27
Ditto 12.00m long
106.00
28
100.00
29
Ditto 9.00m long.
98.00
30
Ditto 12.00m long
96.00
31
130.00
32
Ditto 9.00m long.
128.00
33
Ditto 12.00m long
126.00
34
125.00
35
Ditto 9.00m long.
123.00
36
Ditto 12.00m long
121.00
37
145.00
38
Ditto 9.00m long.
143.00
39
Ditto 12.00m long
141.00
40
140.00
41
138.00
42
Ditto 12.00m long
136.00
43
Handle, transport, pitch and drive 150mm x 150mm pile.
20.00
44
Ditto 200mm x 200mm pile.
30.00
45
35.00
46
35.00
PILING (CONTD)
No.
Item Description
- SR/8 -
Unit
Rate
(RM)

47
35.00
48
40.00
49
12.70mm (overall) Butt weld connection 0.60m girth between edges of

mild steel extension head and base cap plates including coated heavily
with bituminous compound.
nr
25.00
50
Ditto 0.80m girth ditto.
nr
30.00
51
nr
30.00
52
nr
40.00
53
nr
45.00
54
nr
50.00
55
Cut off and remove surplus length of 150mm x 150mm precast

concrete pile and strip off pile head, bend back reinforcement for
connection as specified.
nr
55.00
56
nr
60.00
57
nr
65.00
58
nr
70.00
59
nr
80.00
60
nr
90.00
61

temporary staging etc. and test an initial pile test size 150mm x
150mm to a vertical load test of .. KN including all extra costs before
commencement of the main piling works.
Per KN
21.00
62
Ditto and test a successive test pile test ditto.
Per KN
11.00
63
Ditto size 200mm x 200mm to a vertical load test of .. KN including

all extra costs before commencement of the main piling works.
Per KN
18.00
Per KN
9.00
Per KN
17.00
Per KN
8.00
Per KN
11.00
Per KN
8.00
64
65

66
67

68
PILING (CONTD)
No.
Item Description
69
- SR/9 -
Unit
Rate
(RM)

70
71

72
Per KN
11.00
Per KN
8.00
Per KN
11.00
Per KN
8.00
PRECAST CONCRETE SPUN PILES

73
Supply only 250mm diameter initial/head pile 6.00m long.
100.00
74
Ditto 9.00m long.
98.00
75
Ditto 12.00m long
96.00
76
Supply only 250mm diameter extension pile 6.00m long.
95.00
77
Ditto 9.00m long.
93.00
78
Ditto 12.00m long
91.00
79
130.00
80
Ditto 9.00m long.
128.00
81
Ditto 12.00m long
128.00
82
135.00
83
Ditto 9.00m long.
133.00
84
Ditto 12.00m long
131.00
85
165.00
86
Ditto 9.00m long.
163.00
87
Ditto 12.00m long
161.00
88
160.00
89
Ditto 9.00m long.
158.00
90
Ditto 12.00m long
156.00
91
195.00
92
Ditto 9.00m long.
193.00
93
Ditto 12.00m long
191.00
PILING (CONTD)
No.
Item Description
Unit
Rate
(RM)
PRECAST CONCRETE SPUN PILES (CONTD)

94
- SR/10 -
190.00
95
Ditto 9.00m long.
188.00
96
Ditto 12.00m long
186.00
97
225.00
98
Ditto 9.00m long.
223.00
99
Ditto 12.00m long
221.00
100
220.00
101
Ditto 9.00m long.
218.00
102
Ditto 12.00m long
216.00
103
280.00
104
Ditto 9.00m long.
278.00
105
Ditto 12.00m long
276.00
106
275.00
107
Ditto 9.00m long.
273.00
108
Ditto 12.00m long.
271.00
109
Handle, transport, pitch and drive 250mm diameter pile.
50.00
110
Ditto 300mm ditto.
50.00
111
Ditto 350mm ditto.
50.00
112
Ditto 400mm ditto.
60.00
113
Ditto 450mm ditto.
60.00
114
Ditto 600mm ditto.
60.00
115
12.70mm (overall) Butt weld connection 0.8m girth between edges of

mild steel extension head and base cap plates including coated heavily
with bituminous compound.
nr
50.00
116
nr
50.00
117
nr
50.00
118
nr
60.00
119
nr
60.00
120
nr
60.00
PILING (CONTD)
No.
Item Description
Unit
Rate
(RM)

121
Cut off 250mm diameter precast concrete spun pile to the required
level and roughen the inner surface to detail.
- SR/11 -
nr
50.00
122
Ditto 300mm diameter ditto.
nr
65.00
123
nr
80.00
124
nr
95.00
125
nr
110.00
126
nr
125.00
127
Supply and install 12mm diameter high yield steel reinforcement in

pile head to detail.
kg
4.30
128
kg
4.10
129
Provide and weld 6mm thick mild steel plates to detail for 250mm
diameter piles.
nr
55.00
130
Ditto 300mm diameter piles.
nr
65.00
131
nr
80.00
132
nr
90.00
133
nr
100.00
134
nr
130.00
135
Supply, place and compact grade 30/20 concrete in pile hollow section
as specified.
m3
450.00

temporary staging etc. and test an initial pile test size 250mm
diameter to a vertical load test of .. KN including all extra costs
before commencement of the main piling works.
Per KN
18.00
137
Per KN
9.00
138
Ditto pile size 300mm diameter to a vertical load test of .. KN

including all extra costs before commencement of the main piling
works.
Per KN
17.00
139
Per KN
9.00
140
Ditto size 350mm diameter to a vertical load test of .. KN including

Per KN
18.00
Per KN
9.00
136
141
PILING (CONTD)
No.
Item Description
Unit
Rate
(RM)

142
143

- SR/12 -
Per KN
21.00
Per KN
11.00
144

145
146

147
148
To carry out P.D.A test on 150mm x 150mm RC Pile or 150mm

diameter Spun Pile at specified location (excludes providing piling
rack and hammer)
149
150
151

rack and hammer)
Per KN
11.00
Per KN
8.00
Per KN
11.00
Per KN
8.00
nr
3,900.00
nr
4,160.00
nr
4,550.00
nr
1,092.00

rack and hammer)
Mobilization of PDA testing and equipments and personnel and carry
out PDA testing with CAPWAP analysis inclusive reporting and
submission of three (3) sets of report on test piles. (R.C. Square Pile
Sizes 150mm x 150mm up to 400mm x 400mm)
EXCAVATOR
No.
Item Description
Unit
Cut down and clear away from site, tress exceeding 300mm
and not exceeding 600mm girth at 1.00m above ground
level including grubbing up roots and filling up holes with
approved earth.
nr
169.60
Rate (RM)
Ditto exceeding 600mm and not exceeding 1200mm girth

ditto.
nr
225.70
nr
459.70
- SR/13 -
ditto.
4
Excavate oversite average 150mm deep to level off formation

or reduce level.
m2
2.40
Excavate to obtain formation level, load and transport

excavated material to temporary spoil heap or filling area
within site (by mechanical equipment).
m3
2.80
Ditto, away from site within 1 km lead.
m3
5.20
Transport only through each subsequent 1 km lead.
m3
0.55
Excavate for foundation, trenches, pier holes, manholes, septic

tanks, filter beds etc. & exceeding 1.50m deep, backfill and
remove surplus spoil and deposit, spread and level on site as
specified (by hand).
m3
17.00
Ditto exceeding 1.50m & not exceeding 3.00m deep ditto

(ditto).
m3
30.60
10
Ditto exceeding 3.00m & not exceeding 4.50m deep ditto

(ditto).
m3
43.80
11
Ditto irrespective of depth (by mechanical equipment).
m3
11.10
12
Excavation and removal of unsuitable material to contractors

own dumping source within 10 km from site (by mechanical
equipment).
m3
9.70
Imported earth from contractors own source within 10 km

from site including unloading in filling areas.
m3
14.90
14
Imported sandfill ditto.
m3
40.20
15
Transportation of the imported earth from contractors own

source through each subsequent 1 km lead.
m3
0.60
Spread, level and compact excavated earth/imported earth in

layers as specified in filling areas.
m3
1.90
Ditto surplus excavated earth in areas away from site, within 1

km lead.
m3
2.00
18
Hardcore as specified.
m3
48.00
19
50mm Thick sand filling, spread and levelled under concrete

slabs and floor.
m2
2.20
13
16
17
EXCAVATOR (CONTD)
Notes :
1.0 Item 6 and 7 If it comes to the knowledge of the S.O. that the Contractor is selling the surplus excavated
material, then the Contractor is not entitled to any payment in respect of this item.
2.0 In the measurement of quantities of earth either carting away or filling, the S.O. shall ensure that these are
compacted or consolidated quantity. For guidance, the following are the average increases in bulk of various
types of ground after excavation.
- SR/14 -
Type
Percent
Gravel
10
Sand
12
Ordinary Earth
25
Clay
33
1/3
Chalk
33
1/3
Rock
50
1/2
CONCRETOR
No.
Item Description
Unit
Concrete grade 15P (1:3:6-38mm gauge granite) as specified

in foundations.
m3
280.00
Ditto grade 15P (1:3:6-25mm gauge granite) as specified in

floors, aprons, kerbs, steps, etc.
m3
285.00

in foundations.
m3
340.00
Ditto as specified in ground floor slabs, aprons, kerbs, steps,
m3
345.00
- SR/15 -
Rate
(RM)
etc.
Ditto as specified in suspended floor slabs, walls, columns,
stairs, landings, canopy slabs, roof slabs, gutter sides and
bottoms, etc.
m3
350.00
Concrete grade 25p (1:1:3-20mm gauge granite) as

specified in foundations.
m3
390.00
Ditto, as specified in ground floor slabs, aprons, kerbs, steps,

etc.
m3
395.00
Ditto, as specified in suspended floor slabs, walls, columns,

bottoms etc.
m3
400.00

in foundations.
m3
450.00
10

etc.
m3
455.00
11

bottoms etc.
m3
460.00
12
Concrete grade 40 as specified in foundations.
m3
550.00
13

etc.
m3
555.00
14

bottoms etc.
m3
560.00
15
Mild steel bars in reinforcement to concrete work generally

including all cutting, bending and placing in position :
a) 6mm Diameter.
kg
4.30
b) 10mm Diameter.
kg
4.30
c) 12mm Diameter.
kg
4.30
d) 16mm 32 mm Diameter.
kg
4.30
CONCRETOR (CONTD)
No.
Item Description
16
High tensile steel bars in reinforcement to concrete work

generally including all cutting, bending and placing in position :
a) 10mm Diameter.
Unit
kg
- SR/16 -
Rate
(RM)
4.30
17
18
19
b) 12mm Diameter.
kg
4.30
c) 16mm 32 mm Diameter.
kg
4.30
Welded steel fabric reinforcement of 100mm x 200mm

weighing 3.73 kg/ms and embedded in concrete (MS-B283/B6).
m2
17.00
m2
20.00
m2
25.50
Ditto 100mm x 200mm mesh weighing 4.53kg/ms ditto (MSB385/B7).

20
m2
30.00
21
Ditto 200mm x 200mm mesh weighing 2.22kg/ms ditto (MSA142/A6).
m2
11.00
22
Ditto 200mm x 200mm mesh weighing 3.02kg/ms ditto (MSB193/A7).
m2
14.00
23
m2
18.00
24
m2
24.00
25

Expanded metal reinforcement of 100mm x 400mm weighing
2.61kg/ms (MS-C283/C6).
m2
20.00
m2
12.50
Ditto weighing 4.34 kg/ms (MS-C503/C8).
m2
19.50
26
27
SAWN FORMWORK AS SPECIFIED

28
To sides of foundation and ground beam.
m2
50.00
29
To sides of wall.
m2
50.00
30
To sides of column, staircase, lintols etc.
m2
50.00
31
To sides and soffit of beam.
m2
55.00
32
To soffit of suspended floor slab, roof slab, landing slab etc.
m2
55.00
33
Extra over last four items for sloping surfaces.
m2
5.00
34
Extra over for strutting to soffits exceeding 3.60m high for

every 600mm stages.
m2
5.00
CONCRETOR (CONTD)
- SR/17 -
No.
Item Description
Unit
Rate
(RM)
SAWN FORMWORK AS SPECIFIED (CONTD)

35
Extra over sawn formwork for wrot surfaces.
m2
10.00
m2
25.00
20.00
150mm Wide precast reinforced concrete (1:2:4 20mm

aggregate) half round surface water drain channel including
bends, junctions etc. finished fair on exposed surfaces and
bedding as specified, including all necessary excavation.
40.00
39
225mm Wide ditto.
55.00
40
300mm Wide ditto.
70.00
41
375mm Wide ditto.
85.00
42
450mm x 450mm x 75mm Thick precast reinforced concrete

(1:2:4-20mm aggregate) `longkang pencegah malaria finished
fair on exposed surfaces and bedding as specified including all
necessary excavation.
80.00
m2
75.00
20.00
m2
16.00
36
37
Extra over sawn formwork for patterned formwork with fillets

at 150mm centres or in 150mm wide V jointed timber
boards.
12mm Bitumen impregnated fibreboard 150mm wide as
expansion joint filler in reinforced concrete structure including
filling 10mm x 10mm recess with non shrinkable mastic
grouting.
PRECAST CONCRETE WORK

38
43
44
50mm Thick precast reinforced concrete (1:2:4-20mm

aggregate) drain cover with and including one layer of fabric
reinforcement, weighing 2.35kg/m2 (A6).
112mm x 150mm precast concrete (1:2:4-20mm aggregate)
lintol including formwork but excluding reinforcement.
DAMP PROFF MEMBRANE

45
`Pabkote No.3 or other approved bituminous damp proof

membrane applied on concrete surfaces all to the approval of
the S.O. and in accordance with the manufacturers instruction.
- SR/18 -
BRICKLAYER
Item Description
No.
Unit
Rate
(RM)
One brickwall in common bricks in cement mortar (1:6) as specified.
m2
70.00
Ditto in cement mortar (1:3) ditto.
m2
71.00
Half brickwall in common bricks in cement mortar (1:6) reinforced

with and including brick reinforcement at every fourth course.
m2
39.00
m2
39.00
Extra over common brickwork for fairface in cement mortar (1:6)

pointing on one side only as specified.
m2
9.00
Half brickwall built honey-comb in cement mortar (1:6) with 113mm

spaces as specified.
m2
22.00
Half brickwall built entirely of facing bricks in gauged mortar (1:6)

stuck weather pointing as specified.
m2
95.00
One brickwall in cement bricks in mortar (1:6) as specified.
m2
61.00
m2
63.00
Half brickwall in cement bricks in cement mortar (1:6) reinforced

with and including brick reinforcement at every fourth course.
m2
35.00
11
m2
35.50
12
One brickwall in calcium cilicate bricks in cement mortar (1:6) as

specified.
m2
69.00
13
m2
69.50
14
Half brickwall in calcium cilicate bricks in cement mortar (1:6)

reinforcement at every fourth course
m2
39.00
15
m2
39.50
16
Damp proof courses as specified (measured nett no allowance made

for laps in various widths as specified).
m2
14.50
17
90mm Thick precast cement and sand hollow blocks in cement mortar
(1:6) as specified.
m2
48.00
18
m2
48.00
19
114mm Thick precast cement and sand hollow blocks in cement

mortar (1:6) as specified.
m2
58.00
20
m2
59.00
21
190mm Thick precast cement and sand hollow blocks in cement

mortar (1:6) as specified.
m2
93.00
22
m2
95.00
23
450mm Thick limestone rubble walling in cement mortar (1:3) as

specified.
m2
165.00
m2
154.00
m2
32.00
m2
68.00
10
24
25
26
Ditto granite ditto.

Extra over uncourse random stone walling for fair face in cement
mortar (1:3) and pointing specified.
Extra over for squared rubble fair face and pointed as specified.
- SR/19 -
DRAINLAYER
No.
Item Description
Unit
Rate
(RM)
Excavate trench for 100mm diameter drains and bed 400mm wide not
exceeding 1.50m deep and average 900mm deep and back filling
trench including removing surplus soil and deposit and spread and
level on site as specified.
7.00
Ditto exceeding 1.50m deep but not exceeding 3.00m deep and
average 1.80m deep ditto.
16.00
Excavate trench for 150mm diameter drains and bed 450mm wide
not exceeding 1.50m deep and average 900mm deep ditto.
8.00
17.00
Ditto exceeding 1.50m deep but not exceeding 3.00m deep and
average 1.80m deep ditto.
150mm Concrete (1:3:6-38mm aggregate) bed 450mm wide under

100mm diameter drain pipe and haunch as specified.
19.00
Ditto 500mm wide under 150mm diameter drain pipe and ditto.
22.00
Ditto under 100mm diameter drain pipe and completely surround as

specified.
31.00
Ditto under 150mm diameter drain pipe and ditto.
40.00
Concrete (1:2:4-20mm aggregate in benching average thickness of

150mm to bottom of manhole finished to steep falls towards channels
and rendered with and including 13mm thick cement and sand (1:3)
trowelled smooth.
m2
53.00
m2
13.00
10
13mm Thick cement and sand (1:3) waterproofed rendering as

specified to internal sides of manhole or septic tank.
11
100mm Diameter vitrified clay pipe laid and jointed with flexible rubber
ring as specified.
37.00
12
Extra over bend
nr
18.00
13
Extra over 100mm x 100mm junction (Tee or Y).
nr
31.00
14
150mm Diameter vitrified clay half round straight channel and jointing
in cement and sand (1:3).
47.00
15
Extra over bend.
nr
42.00
16
Extra over 150mm x 150mm junction (Tee or Y).
nr
77.00
17
18.00
18
Extra over bend.
nr
19.00
19
22.00
20
Extra over bend.
nr
42.00
21
225mm Diameter vitrified clay pipe half round straight channel and
jointing in cement and sand (1:3).
27.00
- SR/20 -
DRAINLAYER (CONTD)
Item Description
No.
Unit
Rate
(RM)
22
Extra over bend.
nr
59.00
23
100mm Diameter (medium duty) cast iron drains laid complete as

specified.
77.00
24
Extra over bend.
nr
38.00
25
150mm diameter vitrified clay half round straight channel and jointing
123.00
26
Extra over bend.
nr
72.00
27
100mm Diameter salt glazed drains (1 Quality) laid and jointed with
tarred gaskin and cement and sand (1:3).
14.00
28
150mm diameter ditto.
18.00
29
100mm Diameter salt glazed stoneware half round straight channel

and jointing in cement and sand (1:3).
9.00
30
Extra over bend.
nr
7.00
31
150mm Diameter salt glazed stoneware half round straight channel

and jointing in cement and sand (1:3).
18.00
32
Extra over bend.
nr
9.00
33
100mm Diameter UPVC Class ''C'' pipes laid and jointed with solvent
weld as specified and in accordance with manufacturer's
instructions.
nr
20.00
34
Extra over bend.
nr
36.00
35
100mm Diameter UPVC Class ''C'' pipes laid and jointed with solvent
weld as specified and in accordance with manufacturer's instructions.
44.00
36
Extra over bend.
nr
100.00
37
19mm Diameter mild steel rod 750mm girth bent as required and
with ends split caulked and built into brickwork as step iron.
nr
7.00
38
610mm x 457mm Coated cast iron light duty single seal flat type
manhole cover and frame to BS.497 in grade ''C'' weighing 25.45kg
including setting frame in cement and sand (1:3) as specified and
sealing cover with grease.
nr
100.00
39
610mm x 457mm ditto weighing 38.18kg ditto.
nr
150.00
40
762mm x 462mm ditto medium duty ditto grade ''B'' weighing

234.00kg ditto.
nr
950.00
41
588mm Diameter coated cast iron heavy duty single flat type manhole
cover and frame to BS.497 in grade ''A'' weighing 245/00kg including
setting frame in cement and sand (1:3) as specified and sealing cover
with grease.
nr
1,050.00
- SR/21 -
DRAINLAYER (CONTD)
Item Description
Unit
No.
42
43
300mm - 100mm gauge graded limestone in filter bed as filter media.

100mm Diameter (medium duty) cast iron drains laid complete as
specified.
75.00
9.00
10.00
150mm Diameter half round glazeware drain cast in suitable length,

finished fair on exposed surfaces, bedded, jointed and pointed in
cement mortar (1:3) and including plain concrete as specified.
15.00
46
Extra over bend.
nr
5.00
47
225mm Diameter half round glazeware drain cast in suitable length,

finished fair on exposed surfaces, bedded, jointed and pointed in
cement mortar (1:3) and including plain concrete as specified.
150mm diameter ditto.
16.00
48
Extra over bend.
nr
7.00
49
Supply and fix 15 persons capacity septic tank complete with

effluent pipes as specified.
nr
15,000.00
50
Ditto 25 persons ditto.
nr
25,000.00
51
nr
40,500.00
52
nr
60,000.00
53
nr
75,000.00
44
45
100mm Diameter unglazed clayware subsoil drain pipe with open

joints.
150mm Diameter ditto.
m3
Rate
(RM)
- SR/22 -
ROOFER
Item Description
Unit
Interlocking concrete roofing tiles laid to 318 mm gauge on and

including battens as specified (standard colours).
m2
38.00
Ditto (premium colours).
m2
43.00
Ditto laid to 343 mm gauge ditto (standard colour).
m2
38.00
Ditto (premium colour).
m2
43.00
Hip or ridge tiles to match interlocking concrete roof tiles as specified

Ditto 500mm wide under 150mm diameter drain pipe and ditto.
36.00
No.
Rate
(RM)
Clay roofing tiles laid on and including battens as specified

(standard colour).
m2
73.00
Ditto (satin glazed).
m2
96.00
Hip or ridge to match interlocking clay roof tiles (standard colour).
71.00
Ditto (satin glazed).
79.00
10
Approved 0,48mm thick (Total Coated Thickness) standard colorbond

metal roofing sheet, fixed on timber joist or steel purlin (measured
separately) all in accordance with manufacturer's instruction
(measured nett-no allowance for laps).
11
Colorbond hip or ridge to match metal roof sheet (standard colour).
12
Corrugated aluminium steel roofing 0.50mm thick as specified

including cutting and fixing
13
0.70mm thick aluminium ridge capping 500mm girth.
14
Approved interlocking galvanised steel roofing sheets (0.48mm thick)

as specified decking secured to timber or steel purlins (measured
separately) as per manufacturer's intructions,including 150mm end
laps (measured nett no allowance made for laps).
m2
66.00
30.00
m2
64.00
69.00
m2
75.00
15
0.48mm Thick galvanised steel ridge caping 600mm girth as

specified.
32.00
16
0.42mm Thick galvanised steel flashing 300mm girth as specified.
30.00
17
Approved 3mm thick standard bituminous corrugated roofing sheet,

fixed on timber joists or steel purlin (measured separately all in
accordance with manufacturer's instruction (measured nett-no
allowance for laps)
m2
35.00
18
3mm Thick bituminous corrugated ridge capping 580mm girth as

specified.
20.00
19
Approved ceramic roofing tiles laid on and including timber battens as

specified.
m2
89.00
20
Hip or ridge to match ceramic roof tiles as specified
68.00
21
Approved 6mm thick polycarbonate roofing shhet fixed on timber or

steel purlins (measured separately) including forming curves and all in
accordance with the manufacturer's intruction (measured nett-no
allowance made for laps).
m2
165.00
- SR/23 -
22
Approved steel roof truss system complete with high tensile

galvanised steel roof truss, come with plates, self drilling fastener,
metal angle plates anchored with expansion bolt and steel battens
spaced to suit roofing profile in accordance with the manufacturer's
instructions
m2
66.00
CARPENTER AND JOINER

No.
Item Description
Unit
Rate
(RM)
The Following In Wrot Pressure-Treated S.G. 3 & S.G. 4 (Group ''B'')

Timber Unless Otherwise Stated.
1
Frames to doors, windows vent including fixing (S.G. 1 & S.G. 2

(Group ''A'') timber).
m3
2,500.00
Floor joists, roof trusses, rafters, ceiling joists and partitions including
fixing (Sawn S.G. 1 & S.G. 2 (Group ''A'') timber).
m3
2,300.00
Floor joists, roof trusses, rafters, ceiling joists partitions and ramps
including fixing (Sawn S.G. 3 & S.G. 4 (Group ''B'') timber).
m3
1,300.00
38mm Thick framed, ledged and braced doors and windows

including fixing but excluding ironmongery (measeured overall).
m2
140.00
38mm Thick panelled doors and casement windows, open and rebated
for glass or other infill (measured separately) including fixing but
excluding ironmongery (ditto).
m2
140.00
51mm Thick louvred doors and windows including ditto (ditto).
m2
150.00
38mm Thick skeleton framed flush door covered both sides with 6mm
thick plywood including ditto (ditto).
m2
80.00
Approved one hour rated doors in timber frame including

assembling all in accordance with the manufacturer's instructions
complete with accessories, single leaf size 900mm x 2100mm x
44mm thick.
nr
690.00
nr
1,400.00
Approved two hour rated doors in timber frame including assembling

all in accordance with the manufacturer's instructions complete with
accessories, single leaf size 900mm x 2100mm x 44mm thick.
nr
1,350.00
11
Ditto - Double leaf size 1800mm x 2100mm x 48mm thick.
nr
2,700.00
12
28mm Thick approved PVC flush door overall size 750mm x 2100mm
including fixing but excluding ironmongery.
nr
130.00
13
38mm Thick approved PVC flush door overall size 875mm x 2100mm
ditto.
nr
190.00
14
28mm Thick approved PVC sliding/folding door overall size 775mm x

2125mm including fixing but excluding ironmongery.
nr
135.00
15
32mm Thick tongued and grooved floor boarding.
m2
100.00
16
19mm Thick weather boarding (measured nett).
m2
55.00
17
25mm Thick barge boards and fascias.
m2
65.00
18
19mm Thick boarding in shelves.
m2
55.00
19
13mm Thick ''Damar Minyak'' wall panelling comprising of 51m x

13mm and 25mm x 13mm strips at 25mm apart as specified.
m2
120.00
20
Moulded skirtings, architrave, picture rail AND CORNICES IN S.G 5 &

S.G. 6 (Group ''C'') timber including fixing.
m3
4,000.00
9
10
- SR/24 -
21
Staircase component in S.G. 1 & S.G. 2 (Group ''A'') timber including

fixing.
m3
3,000.00
CARPENTER AND JOINER (CONTD)

Item Description
Unit
22
13mm Thick soft board in ceilig fixed complete including V-jointed and
cutting.
m2
33.00
23
3.2mm Thick fibre cement board in ceiling fixed complete as

specified.
m2
20.00
m2
22.00
No.
24
Rate
(RM)
4.5mm ditto.
25
6mm ditto.
m2
26.00
26
9mm Thick chipboard in ceiling fixed complete butt or V-jointed and

cutting.
m2
19.00
27
13mm ditto.
m2
22.00
28
8mm Thick gypsum plaster board in ceiling fixed complete as

specified.
m2
16.00
m2
19.00
m2
24.00
29
30
26mm Thick plywood panel in partition including fixing.

8mm ditto.
31
10mm ditto.
m2
27.00
32
6mm Thick plywood panel in partition including fixing.
m2
19.00
33
10mm ditto.
m2
24.00
34
13mm ditto.
m2
32.00
35
6mm Thick fibre cement board in partition including fixing but

excluding framing.
m2
22.00
36
12mm ditto.
m2
33.00
37
24mm ditto.
m2
60.00
38
9mm Thick approved gypsum board in partition including fixing but

excluding framing.
m2
26.00
39
12mm ditto
m2
29.00
40
1mm Thick ''Formica'' or equivalent laminated plastic sheeting

including fixing.
m2
135.00
41
50mm Thick ''Insulite'' wood wool-slabs including fixing.
m2
60.00
42
32mm Thick perforated acoustic boards fixed to walls as specified.
m2
130.00
43
12mm Thick mineral fibre board ceiling, exposed lay in grid and
complete with metal framing as specified (simple pattern).
m2
68.00
44
16mm ditto.
m2
74.00
45
13MM Thick mineral fibre board ceiling with concealed metal
- SR/25 -
suspension and joint edge and complete with ditto (ditto).

46
No.
47
50
48
49
51
52
53
16mm ditto (ditto).
Item Description
10mm Thick plain fibrous plasterglass ceiling board on and including
galvanised iron suspension system as specified.
50mm
13mmThick
ditto. resilient and flexible bounded fine glass fibre mat lining
(density 10kg/m3) and fixing to wall as specified.
65mm x 65mm approved plasterglass plain cornice as specified.
Layer of single sided reinforced aluminium foil insulation laid to
slope with with 150mm laps (measered nett-no allowance made for
for laps).
25mm Thick ''Rockwool'' mineral woolslab (NO.337) sandwiched
between timber framing (measured separately).
Galvanised chicken wire netting 50mm mesh, fixed with tying wire
to purlins including 150mm laps (measured nett-no allowance made
for laps).
CARPENTER AND JOINER (CONTD)
- SR/26 -
m2
110.00
m2
Unit
m2
120.00
Rate
(RM)
53.00
m2
m2
12.00
27.00
9.50
m2
7.00
m2
15.00
m2
4.50
IRONMONGERY
Item Description
No.
Unit
Rate
(RM)
Supply and fix the following ironmongery

1
75mm Steel but hinges (75mm x 60mm).
pr
10.00
100mm Ditto (100mm x 60mm).
pr
11.00
100mm Galvanised steel butt hinges.
pr
12.00
75mm Brass butt hinges (75mm x 60mm)
pr
15.00
100mm Ditto (100mm x 60mm).
pr
20.00
100mm Stainless steel butt hinges
pr
26.00
75mm Counter flap brass hinges
pr
31.00
150mm Brass cabin hook and eye.
nr
17.00
100mm Cabinet "D" handle (locally manufactured)
nr
9.00
10
150mm Ditto (ditto)
nr
11.00
11
1 set 300mm standard galvanised steel adjusted friction stay
nr
20.00
12
1 set 300mm standard stainless steel ditto
nr
40.00
13
Windows spring catch
nr
14.00
14
Windows fastener
nr
19.00
15
Window handle (casement window handle bronze aluminium)
nr
13.00
16
Extruded aluminium hat and coat hook with rubber buffer

32mm Thick tongued and grooved floor boarding.
nr
16.00
17
300mm Nylon cranked pull door handle
nr
600.00
18
200mm Brass barrel bolt
nr
20.00
19
250mm Ditto
nr
26.00
20
150mm x 19mm
manufactured).
nr
24.00
21
200mm x 19mm Ditto (ditto)
nr
30.00
22
150mm x 25mm Stainless steel flush bolt
nr
28.00
23
300mm x 25mm Ditto
nr
35.00
24
100mm x 50mm Flush pull (locally manufactured)
nr
21.00
25
37.50mm Brass cylinder padlock (locally manufactured)
nr
27.00
26
50mm Ditto (ditto)
nr
40.00
27
62.50mm Ditto(ditto)
nr
48.00
28
Approved light duty door closer (locally manufactured)
nr
85.00
Aluminium
lever
action
- SR/27 -
flush
bolt
(locally
IRONMONGERY (CONTD)
Item Description
No.
Unit
Rate
(RM)
Supply and fix the following ironmongery (Contd)

29
Double action floor spring.
nr
420.00
30
40mm/38mm Diameter rubber door stop.
nr
3.00
31
Approved door selector (locally manufactured).
nr
75.00
32
50mm Brass cupboard lock.
nr
25.00
33
62.50mm Cylinder sliding cupboard lock.
nr
55.00
34
Bathroom indicating bolt.
nr
43.00
35
2 lever mortice lockset (CROWN or other approved equivalent)

150mm Brass cabin hook and eye.
nr
41.00
36
2 lever rebated mortice lockset (ditto).
nr
50.00
37
3 lever mortice lockset (ditto).
nr
29.00
38
3 lever rebated mortice lockset (ditto).
nr
33.00
39
Thumb turn cylinder deadlock in stainless steel finish.
nr
65.00
40
Approved double cylinder deadlock
nr
390.00
41
60mm cylinder mortice door lock (5 pins thumb turn button)

Windows fastener.
nr
45.00
42
60mm Ditto but rebated (ditto).
nr
55.00
43
70mm Brass ball catch
nr
18.00
- SR/28 -
STEEL AND IRONWORKER

Item Description
No.
Rolled mild steel in roof trusses, braces, gusset plates, bearing plates
etc. including riveting, welding, bolting, hoisting and fixing.
Unit
Rate
(RM)
kg
4.90
Rolled mild steel in angles, joist, channels, plates, etc. including cutting,
drilling, assembling, welding, riveting, bolting etc.
kg
6.30
Mild steel hollow sections including cutting, drilling, assembling, welding

etc.
kg
7.50
1.0mm Thick natural anodised window or door frame including cutting,

drilling, assembling, welding, riveting, bolting etc.
25.00
Design, supply, fabricate and deliver to site including fixing and hoisting
in position steelroof truss, rafters, chord, bearers, ties, struts, wall
plates, truss connecters, straps, bolts and nuts and other associated
works, materials and labour required for the complete installation of the
fabricated steel trusses to S.O.s approval.
m2
120.00
Supply and fix the following mild steel bolts complete with nuts and
washers :a)
19mm-25mm Diameter bolts.
kg
8.00
b)
13mm-6mm ditto.
kg
8.00
c)
9mm ditto.
kg
8.00
d)
8mm ditto.
kg
8.00
e)
6mm ditto.
kg
8.00
50mm x 50mm x 2mm Thick galvanised wire mesh.
m2
17.50
50mm x 25mm x 2mm Ditto.
m2
20.00
Pair of self finished electro galvanised steel adjustable louver style, 4

blades and fixing (single control).
nr
18.00
10
Add for each additional louver blade.
nr
4.80
11
Pair of self finished galvanised pressed steel adjustable louver style, 8

blades and fixing (single control).
nr
21.00
12
Pair of self finished galvanised pressed steel adjustable louver style, 8

blades and fixing (double control).
nr
21.00
13
Add for each additional louver blade.
nr
4.80
14
10mm Diameter mild steel burglars bars and fixing.
5.00
15
12mm Ditto.
6.50
16
Supply and fix 1.0mm thick natural anodised aluminium side hung
casement window complete with all necessary framing and accessories
(glass measured separately) and fixing, all as per instruction and to the
approval of the S.O.
m2
225.00
- SR/29 -
STEEL AND IRONWORKER (CONTD)

Item Description
No.
17
Unit
Rate
(RM)
Supply and fix window grille comprising of 20mm x 20mm mild steel
hollow section framing infilled with 20mm x 3.2mm thick mild steel
plate set in rectangular design at 100mm
m2
120.00
18
Supply and fix door grille ditto.
m2
145.00
19
Supply and fix 1.0mm thick natural anodised aluminium two panel
sliding window complete with all necessary framing and accessories,
beading on top and bottom of frame (glass measured separately) and
fixing, all as per instruction and to the approval of the S.O.
m2
180.00
20
Supply and fix 1.0mm thick natural anodised aluminium three panel
sliding door ditto.
m2
230.00
21
Supply and install 3.00m x 2.40m mild steel collapsible door including
channels, tracks, guides, etc. and fixing, all as per instruction and to the
approval of the S.O.
nr
1,500.00
m2
m2
m2
m2
m2
144.00
144.00
137.00
101.00
144.00
22
23
To design, supply, deliver, & install City Top Light Roof System & Roof
covering for proprietary prefabricated Roof trusses in light Weight Sheet
including all necessary battens and material fabrication and fixing in
position, all fixing accessories items (except UPVC down pipe and 1
layer of insulation) for the complete UPVC down pipe and 1 layer of
insulation) for the complete installation of the standard truss system
with maximum truss span 13m and spacing 1.2 m:a) Concrete roof tile
b) Clay roof tile
c) Metal sheet roof tile profile
d) Metal sheet roof straight profile (deck type)
e) Asphalt Shingles roof
Supply only the following with City Top light weight product:a)
b)
c)
d)
e)
f)
g)
h)
i)
j)
k)
l)
m)
24
Lip-C Section CP75-10

Top-Hat Batten RB35-55
Top-Hat Batten RB40-55
Top-Hat Batten CT61-075
Top-Hat Batten CT61-10
m
m
m
m
m
m
m
m
m
m
m
m
m
9.00
10.00
12.00
16.00
19.00
21.00
26.00
38.00
33.00
5.00
5.00
10.00
14.00
m2
212.00
To design & supply (Ex-Factory) Only BlueScope Lysaght Light Roof

System & Roofing Sheet for proprietary prefabricated Roof trusses in
light Weight Sheet including all necessary battens and accessories items
(except UPVC DOWN pipe and 1 layer of insulation) for the standard
truss system with maximum truss span 13m and spacing 1.2m:-
a)
Metal sheet roof tile profile (Lysaght-Borneo Tiles 0.47mm TCT

in improved clean colorbond XRW)
- SR/30 -

Item Description
No.
25
Rate
(RM)
b)
Metal sheet roof straight profile (Lysaght Spandek 0.47mm TCT

in improved clean colorbond XRW)
m2
178.00
c)
Concrete roof tile (For Design & supply TRUSS COMPONENT

ONLY)
m2
119
m2
m2
m2
m2
141.00
183.00
133.00
99.00
a) M.S Angle Iron per 20 feet long;

1)1x1x1/8
2)1x1x1/8
3)1x1x5mm
4)2x2x3/16
5)2x2x1/4
6)2x2x1/4
7)2x2x3/8
8)3x3x1/4
9)3x3x3/8
10)4x3x3/8
11)4x4x1/2
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
b) M.S Square Bar

1)3/8x20
2)1/2x20
3)5/8x20
4)3/4x20
5)1x20
kg
kg
kg
kg
kg
4.00
4.00
6.00
6.00
12.00
c) M.S Plate
1)4.0mmx4x8
2)2.0mmx4x8
3)3.0mmx4x8
4)4.5mmx4x8
5)6.0mmx4x8
6)8.0mmx4x8
7)9.0mmx4x8
8)10.0mmx4x8
9)12.0mmx4x8
10)15.0mmx4x8
11)18.0mmx4x8
12)20.0mmx4x8
13)25.0mmx4x8
14)6.0mmx6x20
15)1/2x5x20
16)3.0mmx5x10
17)6.0mmx5x20
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
5.00
4.50
4.50
4.50
4.50
To design , supply , deliver & Install Bristeel Light Roof System & Roof
covering for proprietary prefabricated Roof trusses in light Weight Sheet
including all necessary battens and material fabrication and fixing in
position, all fixing accessories items (except UPVC down pipe and 1
layer of insulation) for the complete installation of the standard truss
system with maximum truss span 13m and spacing 1.2m:a)
b)
c)
d)
26
Unit
Concrete roof tile

Unglazed Clay roof tile
Metal sheet roof tileprofile to equivalent 0.47mmTCT
Metal sheet roof straight profile (deck type) to wquivalent
0.47mmTCT
Supply only the following from Teck Guan mild steel material:-
d) Hollow Section per 20 feet long;

1)3x1x2.3mm
2)3x2x2.3mm
3)4x2x2.3mm
4)4x2x4.5mM
- SR/31 -
kg
kg
kg
kg
5.00
5.00
5.00
2.70

Item Description
No.
5)4x4x6.0mm
6)4x6x6.0mm
7)5/8x5/8x1.0mm
8)5/8x5/8x1.2mm
9)3/4x3/4x1.0mm
10)3/4x3/4x1.2mm
11)1x1x1.0mm
12)1x1x1.2mm
13)1x2x1.2mm
14)1x2x2.3mm
15)1x11.6mm
16)1x1x2.3mm
17)2x2x1.6mm
18)2x2x2.3mm
Unit
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
- SR/32 -
Rate
(RM)
5.00
4.70
4.20
5.20
4.20
5.20
4.20
5.00
5.00
5.20
5.20
5.20
5.20
5.00
PAVIOR, PLASTERER AND TILE FIXER

Item Description
No.
Unit
Rate
(RM)
20mm Thick cement and sand (1:2) waterproofed rendering

as specified on concrete slab.
m2
13.
00
32mm Thick ditto
m2
16.
00
20mm Thick ditto skirting 150mm high with rounded top

edge and coved at bottom
20mm Thick cement and sand (1:3) rendering to floor as

specified
m2
25mm Thick ditto
m2
38mm Thick ditto
m2
20mm Thick ditto skirting 100mm high as specified
20mm Thick cement and sand (1:3)rendering to floor in

coloured cement as specified
m2
15.50
25mm Thick ditto
m2
17.00
10
38mm Thick ditto
m2
19.00
11
20mm Thick ditto skirting 100mm high as specified
12
200mm x 200mm x 7mm Thick non-slip ceramic tiles.
m2
76.00
13
300mm x 300mm x 8mm Thick ditto
m2
80.00
14
300mm x 300mm x8mm Thick ceramic tiles including

screeding as specified.
m2
79.00
15
100mm High skirting for 200mm x 7mm thick ceramic tiles

as specified
9.00
16
Ditto for 300mm x 8mm thick ditto
9.50
17
200mm x 200mm x 7mm Thick non-slip heavy duty

homogenous tiles including screed as specified
m2
85.00
18
300mm x 300mm x 8.5mm Ditto
m2
83.00
19
100mm High skirting for 200mm x 8mm heavy duty

homogenous ceramic tiles as specified
9.50
20
Ditto for 300mm x 8.5mm thick ditto
10.00
21
100mm x 200mm x 9mm Thick quarry tiles floorng as

specified
m2
82.00
22
Quarry tile skirting 100mm high
12.50
23
Unglazed mosaic flooring as specified including screed
m2
83..00
24
Unglazed mosaic tiles skirting 100mm high as specified

ditto
17.00
25
Semi-glazed mosaic tiles flooring (Square Pattern) as

specified including screed
m2
83.00
- SR/33 -
7.00
14.
00
15.
00
18.
00
4.00
4.50
PAVIOR, PLASTERER AND TILE FIXER (CONTD)

Item Description
No.
Unit
Rate
(RM)
26
Semi-glazed mosaic tile skirting 100mm high as specified including

screed
27
Semi-glazed mosaic tile flooring (Random Pattern) as specified

including screed
m2
85.0
0
28
Precast terrazzo tile flooring including 16mm (1:3) mortar screed as

specified
m2
82.0
0
29
20mm Thick in-situ terrazzo flooring 100mm as specified including

screed
m2
62.0
0
30
20mm Thick in-situ terrazzo skirting 100mm as specified including

screed
31
Teak parquet flooring including screed
m2
32
Kempas parquet flooring ditto
m2
33
275mm High riser for teak parquet flooring with rounded top edge
34
550mm High ditto
35
13mm x 75mm High timber skirting to match parquet flooring
36
20mm Thick granolithic flooring as specified
37
Ditto skirting 100mm high with rounded top edge and coved at
bottom
38
Vinyl tile flooring as specified including screed
39
100mm High vinyl skirting ditto
40
m2
17.
00
12.
00
180.0
0
120.0
0
55.0
0
110.0
0
18.0
0
9.5
0
3.5
0
45.0
0
8.0
0
35mm x 4mm Aluminium dividing strip fixed and cast in floor finish
as specified
m2
12.0
0
41
16mm Thick cement mortar (1:6) with plasticiser plastering in two

coats as specified to walls
m2
42
12mm ditto to soffit , beam etc.
m2
13.0
0
12.0
0
43
20mm Thick cement and sand (1:3) plastering in two coats as

specified on walls
m2
14.0
0
44
200mm x 200mm x 7mm Thick coloured glazed wall tiles, first

quality fixed including screed and all internal angles, coved and
round edge tiles and all cutting and fixing as specified
m2
57.0
0
- SR/34 -
m2
PLUMBER
Item Description
Unit
Galvanised iron 16 gauge (1.55mm) in flashing,collars etc. including

jointing and cutting fixed as specified.
m2
90.40
Galvanised iron 18 gauge (1.2mm) ditto.
m2
81.50
Galvanised iron 16 gauge (1.55mm) in valley gutters and gutter lining

including jointing and cutting fixed as specified.
m2
95.20
33.40
No.
Rate
(RM)
Galvanised iron 22 gauge (0.77mm) 100mm diameter half round eave

gutters including jointing and fixing with brackets as specified.
Extra for stopped end, angle or outlet.
nr
4.50
Galvanised iron 22 gauge (0.77mm) rainwater box gutter, 600mm girth

(200mm x 200mm) including fixing to timber and cutting hole for
downpipe.
48.80
Extra for stopped end, angle or outlet.
nr
14.40
Galvanised iron 22 gauge (0.77mm) 100mm diameter rainwater

downpipe with socketed joints, jointed in red lead and fixed to wall with
pipe nails, holderbats or brackets.
22.70
Extra over for bend, swan neck and shoes.
nr
11.20
10
Galvanised iron 22 gauge (0.77mm) 100mm x 75mm rainwater

downpipe and fixed to wall with approved holderbats.
31.80
11
Extra over for bend, shoes and short lengths.
nr
13.30
12
75mm Diameter UPVC rainwater down pipe jointed with socket

connectors and fixed to wall with brackets and distance pieces.
28.60
13
Extra over for bend (elbow).
nr
13.20
14
100mm Diameter UPVC rainwater downpipe ditto.
30.50
15
Extra over for bend (elbow)
nr
12.50
16
155mm Diameter UPVC rainwater downpipe ditto.
40.00
17
Extra over for bend (elbow).
nr
47.90
18
150mm Half round PVC rainwater gutter including jointing and fixing
with brackets.
45.10
19
Extra for stopped end.
nr
8.30
20
Approved galvanised iron wire ballon grating and fixing to end of

100mm diameter pipe.
nr
5.50
21
50mm Diameter medium duty coated cast iron soil, waste and
ventilating pipe as specified.
39.10
22
Extra over for bend.
nr
19.30
23
Ditto for 45 degree Y junction with back door.
nr
41.70
- SR/35 -
PLUMBER (CONTD)
Item Description
Unit
24
58.10
25
nr
25.90
26
nr
43.70
27
71.60
28
nr
32.00
29
nr
53.90
30
109.50
31
nr
68.60
32
Ditto for bend with cleaning eye.
nr
82.80
33
Approved fibreglass water tank with lid fixed complete:a) Size 880 gallons (nominal)
nr
2,031.20
b) Size 660 gallons (nominal)
nr
1,521.90
c) Size 400 gallons (nominal)
nr
1,084.90
d) Size 250 gallons (nominal)
nr
983.50
e) Size 200 gallons (nominal)
nr
790.70
f) Size 100 gallons (nominal)
nr
398.50
a) Size 400 gallons (nominal)
nr
1064.00
b) Size 250 gallons (nominal)
nr
665.00
d) Size 200 gallons (nominal)
nr
562.40
e) Size 100 gallons (nominal)
nr
380.00
a)
19mm Flanged tank connection and jointed to galvanised
mild steel tubing and mild steel cistern including welding
flange
to and perforation in cistern.
nr
19.25
b) 25mm Ditto.
nr
22.80
c) 32mm Ditto.
nr
38.00
d) 38mm Ditto.
nr
13.70
e) 50mm Ditto.
nr
55.10
f) 75mm Ditto.
nr
90.00
No.
34
35
Rate
(RM)
Approved High Density Polyethylene (HDPE) water tank with lid fixed
complete :-
PLUMBER (CONTD)
- SR/36 -
Item Description
No.
36
a)
19mm High pressure equilibrium ball valve as specified with
plastic ball and thread brazed on brass stem and body with
flynut
and lead washers and fixing to cistern including
drilling
cistern and jointing to cold water tubing.
b)
37
38
39
25mm ditto.
Unit
nr
Rate
(RM)
51.68
nr
66.48
a)
19mm High pressure equilibrium ball valve as specified with
blown cooper ball and thread brazed on brass stem and body
with
flynut and lead washers and fixing to cistern including
drilling
cistern and jointing to cold water tubing.
nr
324.00
b)
25mm ditto.
nr
522.00
c)
32mm ditto.
nr
756.00
d)
38mm ditto.
nr
828.00
e)
50mm ditto.
nr
900.00
f)
75mm ditto.
nr
3,600.00
g)
100mm ditto.
nr
4,500.00
a) 13mm Pressure screw down stopcock and jointed to galvanised mild

steel tubing both ends.
nr
21.60
b)
19mm ditto.
nr
27.00
c)
25mm ditto.
nr
50.40
d)
32mm ditto.
nr
86.40
e)
38mm ditto.
nr
140.40
f)
50mm ditto.
nr
270.00
18.00
b) 19mm ditto.
23.40
c) 25mm ditto.
36.00
d) 32mm ditto.
46.80
e) 38mm ditto.
54.00
f)
50mm ditto.
77.40
g) 63mm ditto.
99.00
h) 75mm ditto.
129.60
i) 100mm ditto.
180.00
a)
13mm Diameter galvanised mild steel tubing in class C as
specified including couplings, connectors, bends,elbows and
tees.
PLUMBER (CONTD)
No.
40
Item Description
Unit
a)
13mm Diameter galvanised mild steel tubing in class B
including all necessary bends,elbows, tees, fixed complete as
specified.
- SR/37 -
Rate
(RM)
15.30
41
42
43
b) 19mm ditto.
19.80
c) 25mm ditto.
30.60
d) 32mm ditto.
39.24
e) 38mm ditto.
45.00
f) 50mm ditto.
63.00
g) 63mm ditto.
81.00
h) 75mm ditto.
105.84
i) 100mm ditto.
154.08
a)
15mm Diameter UPVC pipe in class E including fixing as
specified.
5.94
b) 20mm ditto
7.20
c) 25mm ditto.
10.80
a)
32mm Diameter UPVC pipe in class D including fixing as
specified.
6.84
b) 40mm ditto.
8.28
c) 50mm ditto.
12.60
d) 75mm ditto.
28.44
e) 100mm ditto.
49.50
a) 15mm Diameter elbow.
nr
1.53
b) 20mm ditto.
nr
2.61
c) 25mm ditto.
nr
3.87
d) 32mm ditto.
nr
7.20
e) 40mm ditto.
nr
10.80
f) 50mm ditto.
nr
19.80
g) 75mm ditto.
nr
51.48
h) 100mm ditto.
nr
103.68
a) 15mm Diameter bend.
nr
1.53
b) 20mm ditto.
nr
2.61
UPVC fittings as specified:-
PLUMBER (CONTD)
Item Description
No.
43
Unit
Rate
(RM)
UPVC fittings as specified (Contd)

c) 25mm ditto.
nr
3.87
d) 32mm ditto.
nr
7.20
e) 40mm ditto.
nr
10.80
f) 50mm ditto.
nr
19.80
g) 75mm ditto.
nr
51.84
- SR/38 -
44
h) 100mm ditto.
nr
103.68
a) 15mm Diameter tee.
nr
2.25
b) 20mm ditto.
nr
3.24
c) 25mm ditto.
nr
6.30
d) 32mm ditto.
nr
9.90
e) 40mm ditto.
nr
13.32
f) 50mm ditto.
nr
22.68
g) 75mm ditto.
nr
60.48
h) 100mm ditto.
nr
60.48
a) 15mm Diameter socket double end.
nr
1.17
b) 20mm ditto.
nr
1.80
c) 25mm ditto.
nr
2.70
d) 32mm ditto.
nr
6.48
e) 40mm ditto.
nr
9.72
f) 50mm ditto.
nr
14.58
g) 75mm ditto.
nr
34.56
h) 100mm ditto.
nr
64.80
a) 25mm Diameter.
15.50
b) 50mm ditto.
28.70
c) 75mm ditto.
49.80
d) 100mm ditto.
79.30
ABS pipe in class C including fixing as specified:-
PLUMBER (CONTD)
Item Description
No.
45
46
Unit
Rate
(RM)
ABS pipe in Class D including fixing as specified:a)
25mm Diameter.
10.44
b)
50mm ditto.
19.26
c)
75mm ditto.
50.22
d)
100mm ditto.
122.40
a) 15mm Diameter.
5.22
b) 25mm ditto.
13.14
ABS pipe in Class E including fixing as specified:-
- SR/39 -
47
c) 50mm ditto.
40.86
d) 75mm ditto.
60.48
e) 100mm ditto.
149.40
a) 15mm Diameter 90 deg.Elbow.
nr
5.43
b) 25mm ditto.
nr
12.31
c) 50mm ditto.
nr
40.15
d) 75mm ditto.
nr
84.00
e) 100mm ditto.
nr
118.80
a) 15mm Diameter 45 deg. Elbow.
nr
9.00
b) 25mm ditto.
nr
9.60
c) 50mm ditto.
nr
19.35
d) 75mm ditto.
nr
154.10
e) 100mm ditto.
nr
223.10
a) 15mm Diameter egual socket.
nr
6.75
b) 25mm ditto.
nr
11.48
c) 50mm ditto.
nr
21.98
d) 75mm ditto.
nr
52.80
e) 100mm ditto.
nr
82.80
a) 15mm Diameter egual tee.
nr
7.50
b) 25mm ditto.
nr
15.38
c) 50mm ditto.
nr
32.70
ABS pipe fittings as specified :-
PLUMBER (CONTD)
Item Description
No.
47
Unit
Rate
(RM)
ABS pipe fittings as specified (Contd):d) 75mm ditto.
nr
127.50
e) 100mm ditto.
nr
142.80
a) 15mm Diameter end cap.
nr
5.78
b) 25mm ditto.
nr
9.38
c) 50mm ditto.
nr
22.05
d) 75mm ditto.
nr
103.20
e) 100mm Diameter end cap.
nr
194.40
a) 25mm Diameter.
8.37
b) 32mm ditto.
12.42
c) 50mm ditto.
30.24
HDPE pipe grade PN 10 including fixing as specified:-
- SR/40 -
d) 75mm ditto.
48
49
59.40
a) 25mm Diameter 90 deg. Elbow.
nr
14.04
b) 32mm ditto.
nr
35.10
c) 50mm ditto.
nr
58.32
d) 75mm ditto.
nr
154.80
a) 25mm Diameter egual tee.
nr
13.20
b) 32mm ditto.
nr
50.40
c) 50mm ditto.
nr
88.20
d) 75mm ditto.
nr
232.20
a) 25mm Diameter Straight Coupler.
nr
12.60
a) 32mm ditto.
nr
28.80
b) 50mm ditto.
nr
51.30
c) 75mm ditto.
nr
126.00
HDPE pipe fittings as specified :-
PLUMBER (CONTD)
Item Description
No.
49
50
Unit
Rate
(RM)
HDPE pipe fittings as specified :a) 25mm Diameter Male Threaded Adaptor (MTA).
nr
10.05
b) 32mm ditto.
nr
17.46
c) 50mm ditto.
nr
27.90
d) 75mm ditto.
nr
87.48
a)
25mm Diameter Female Threaded Adaptor (FTA).
nr
10.65
b)
32mm ditto.
nr
19.44
c)
50mm ditto.
nr
46.62
a)
25mm Diameter Reducer Coupling.
nr
13.20
b)
32mm ditto.
nr
21.42
c)
50mm ditto.
nr
44.82
d)
75mm ditto.
nr
126.00
Supply and fix the following sanitary fittings :-
- SR/41 -
a)
150mm x 150mm Semi-recessed, white glazed vitreous
china toilet roll holder.
nr
40.20
b)
150mm x 150mm Semi-recessed white glazed vitreous china
soap holder.
nr
44.30
c)
300mm x 150mm white glazed vitreous china recessed
combined soap dish and sponge holder.
nr
100.00
d)
550mm x 125mm Plate glass shelf complete with chromium
plated brass brackets.
nr
31.00
e)
600mm x 25mm Diameter chromium plated
ball and brackets for fixing.
nr
120.70
f)
550mm x 400mm Bevelled edged plate glass mirror
complete wiyh 3mm thick plywood backing and fixed with
chromium plated dome headed fixing screws and cork
washers.
nr
56.40
g) 12mm Chromium plated bib tap.
nr
53.60
h)
12mm Wall mounted mixer with 150mm lever swivel anti
splash nozzle or approved equivalent.
nr
73.90
i)
576mm x 426mm Wash basin in white vitreous china
complete with 13mm chromium plated tap blank,tap hole
stopper,32mm P trap including 38mm Seal waste fitting
with
chain and plug and painted bracket support.
nr
197.20
j)
Ditto with two 13mm chromium plated taps, marked hot and
cold.
nr
302.80
towel rail with
PLUMBER (CONTD)
No.
Item Description
Unit
Rate
(RM)
Supply and fix the following sanitary fittings (Contd):k)

500mm x 420mm Wall hung clinical wash hand basin in
white vitreous china with taphole, overflow & chainhole.
nr
1,317.00
l)
White vitreous china sink size 352mm x 352mm x 228mm
complete
with
38mm
trap
including
13mm
chromium
plated pillar tap etc. as specified.
nr
216.30
m) Dito size 572mm x 356mm x 352mm x 228mm x complete

with 38mm trap, 13mm chromium plated pillar tap etc. as
specified.
nr
279.50
n)
Single bowl and single drainer stainless steel sink size
900mm x 450mm x 169mm complete with 13mm chromium
plated pillar tap, 38mm trap etc. as specified.
nr
136.30
o)
Single bowl and single drainer stainless steel sink size
1050mm
x
450mm
x
169mm
complete
with
13mm
chromium plated pillar tap, 38mm trap etc.as specified.
nr
289.40
p) Double bowl and double drainer stainless steel sink

1800mm x 525mm complete with 13mm chromium plated
pillar taps 38mm trap etc.as specified.
nr
335.40
q) Squatting W.C. set including cistern as specified.
nr
342.70
r) Pedestal W.C. set including cistern as specified.
nr
468.70
s) White vitreous china long bath 1500mm x 750mm including 2

nos. chromium plated handles complete with wall mounted
bath
mixer, telephone hand shower set with flexible hose
and wall
brackets and 38mm chromium plated bath pop-up
waste with
overflow pipe and P.
nr
1,142.50
- SR/42 -
t) 100mm Diameter chromium plated shower rose and arm with

swivel joint complete with 13mm chrome plated stopcock.
86.60
Unit
nr
Rate
(RM)
244.90
v) Ditto with (2) two bowls as specified.

4mm Thick clear sheet glass and glazing to wood or metal as specified
w) Ditto with (3) three bowls as specified.
5mm ditto
x) Vitreous china urinal division size 325mm x 600mm
(approximately)).
6mm ditto
nr
m2
nr
m2
661.30
50.00
856.60
59.00
nr
m2
122.60
75.00
y) Concealed Flush Valve.

4mm Thick clear sheet glass lourvre blade 150mm wide as specified
nr
m
569.50
9.00
z) Exposed Flush Valve.

5mm ditto
nr
m
355.60
10.00
13.00
4mm Thick clea float glass and glazing to wood or metal as specified
m2
62.00
5mm ditto
m2
79.00
6mm ditto
m2
90.00
4mm Thick clear float glass louvre blade 150mm wide as specified
11.00
5mm ditto
14.00
6mm ditto
15.00
4mm Thick obscured glass and glazing to wood or metal as specified
m2
42.00
5mm ditto
m2
47.00
4mm thick obscured glass louvre blade 150mm wide as specified

5mm ditto
5mm Thick grey sheet glass and glazing to wood or metal as specified
6mm ditto
m
m
m2
m2
9.00
10.00
87.00
88.00
5mm Thick grey sheet glass louvre blade 150mm wide as specified
15.00
6mm ditto
5mm Thick dark grey float glass and glazing to wood or metal as
15.50
specified
m2
108.00
6mm ditto
m2
110.00
5mm Thick dark grey float glass louvre blade 150mm wide as specified
19.00
6mm ditto
6mm Thick obscured wired glass and glazing to wood or metal as
20.00
m2
190.00
m2
m2
64.00
75.00
No.
1
2
3
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Item Description
u) White vitreous china
single urinal bowl
including automatic cistern and chrome plated stopcock.
nr
as
specified
6mm ditto
specified
26
5mm Thick tinted glass and glazing to wood or metal as specified

27
6mm ditto
GLAZIER
- SR/43 -
PAINTER
Item Description
Unit
Knot, prime, stop and paint one undercoat and two finishing coats of
enamel paint on woodwork.
m2
9.00
Ditto on surfaces not exceeding 200mm girth.
1.50
Ditto exceeding 100mm and not exceeding 200mm girth.
2.00
Ditto exceeding 200mm and not exceeding 300mm girth.
2.50
Clean down,prime and paint one undercoat and two coats of emulsion
paint on wall and ceiling as specified.
m2
9.00
Ditto one undercoat and two coats of weather resistant paint ditto.
m2
10.00
Ditto one undercoat and two coats of gloss enamel paint on metal
surfaces generally as specified
m2
9.50
Ditto on surfaces not exceeding 100mm girth
1.00
Clean down,prime and paint one undercoat and two coats of gloss
enamel paint pn metal surfaces exceeding 200mm girth
1.50
10
Ditto exceding 200mm and not exceeding 300mm girth
2.00
11
Stain and wax polish to approval on timber surfaces as specified
m2
7.00
12
Ditto on surfaces not exceeding 100mm girth
1.00
13
2.00
14
3.00
15
Prepare and apply two coats of floor dressing on parquet or other

timber flooring
m2
9.00
16
Wood preservative,two coats on timber as specified
m2
7.00
17
Prepare and apply two coats of acrylic co-polymer resin based paint
("Standard Matt" or equivalent) on wall and soffits
m2
14.00
18
Prepare, stain to approval and apply three coats of varnish on

sufaces of woodwork
m2
10.00
No.
Rate
(RM)
19
Ditto on sufaces not exceeding 100mm girth
1.50
20
2.50
21
3.50
22
Prepare and supply two coats of flame retardant paint (up to 600
degrees ) on metal surfaces
m2
19.00
Prepare and apply two coats of silicone-based water repellent

solution on fair-face concrete and brickwork surfaces
m2
9.00
23
- SR/44 -
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS

Item Description
Unit
No.
Rate
(RM)
This Section is to be read in conjunction with Jabatan Kerja Raya

Malaysia Standard Specification For Road Works
ROADWORK
Unbound Pavement
1
50mm thick sand spread, levelled and compacted to falls and cambers
with an 8-ton roller.
m2
4.00
Supply, lay and compact 200mm Thick granular sub base as specified
ditto. (Within 10km from source)
m2
20.00
Supply, lay and compact 250mm Thick crushed aggregate base course
as specified ditto. (within 10km from source)
m2
26.25
Supply and spray bituminous prime coat (Grade MC70 or approved

equivalent) as specified.
m2
2.50
Supply, lay and compact asphalt concrete binder course (ACBC) 50mm
Thick inclusive of tack coat as specified. (Within 10KM from source)
m2
18.00
50mm Thick asphalt concrete wearing course (ACWC 20) Ditto.
m2
18.30
Supply, lay and compact suitable earth material road shoulder average
450mm Thickness as specified. (Source within 10KM from site)
m2
6.75
m2
40.00
Supply and lay 300mm x 150mm x 600mm precast reinforced

concrete (1:2:4-20mm aggregate) kerb finished fair on expose
surfaces, bedded, jointed and pointed in cement mortar (1:3)
including all necessary excavation, formwork and painting as
specified.
60.00
10
300mm x 150mm x 600mm ditto with scupper opening ditto.
65.00
11
100mm x 300mm x 600mm with splayed top ditto.
55.00
Road Furniture
8
Supply and lay road marking lines paint 100mm wide (white) as
specified.
Road Kerb
- SR/45 -
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS (CONTD)

Item Description
Unit
No.
Rate
(RM)
CULVERT
14
Supply and lay 600mm Diameter Concrete Culvert Class L as specified.
15
450.00
Ditto 900mm Diameter Ditto.
600.00
16
850.00
16
950.00
17
Ditto 600mm Class Y Ditto.
650.00
18
1,200.00
19
1,500.00
20
1,800.00
21
Head and Wings Walls as specified for 600mm Diameter culvert as

specified.
nr
1,500.00
22
900mm Ditto.
nr
2,000.00
23
1200mm Ditto.
nr
2,500.00
24
1500mm Ditto.
nr
3,000.00
22
Construct 3M x 3M Single Cell R.C. Box Culvert as specified.
6,500.00
23
Head and Wing Walls for Single Cell R.C. Box Culvert as specified.
nr
6,000.00
90.00
100.00
a) 100mm Diameter bend.
nr
85.00
b) 150mm Ditto.
nr
90.00
d) 100mm Diameter for T junction.
nr
90.00
e) 150mm Ditto.
nr
105.00
75.00
EXTERNAL WATER RETICULATION

28
100mm Diameter Mild Steel (MS) pipe including fixing as specified.
29
150mm Ditto.
30
Mild steel (MS) pipe fittings as specified:-
31
150mm Diameter UPVC pipe in class D including fixing as specified.
- SR/46 -

Item Description
Unit
No.
Rate
(RM)
EXTERNAL WATER RETICULATION (CONTD)

32
33
UPVC fittings as specified :a) 150mm Diameter bend.
nr
45.00
b) Ditto for T junction.
nr
60.00
45.00
75.00
a) 100mm Diameter 90 degree elbow.
nr
250.00
b) 150mm ditto.
nr
500.00
c) 100mm Diameter equal tee.
nr
60.00
d) 150mm ditto.
nr
85.00
e) 100mm Diameter 90 degree ditto.
nr
45.00
f) 150mm ditto.
nr
80.00
70.00
100mm Diameter HDPE pipe grade PN10 including fixing as specified.
34
150mm ditto.
35
HDPE pipe fittings as specified :-
FENCING
36
Chain link fencing 1.50m high consisting of 50mm x 50mm painted

steel angle post at 3.00m centres with bottom end embedded in
concrete (1:3:6 25mm aggregate) and with 50mm diamond mesh
(No.10 S.W.G.) galvanised chain link fence, including three strands of
No.8 galvanised straining wire and including 50mm x 50mm x 6mm
painted steel angle corner struts with bottom end embedded in and
including concrete (1:3:6 25mm aggregate) base.
37
Ditto 50mm diamond mesh (No. 12 S.W.G.)
75.00
38
78.00
39
80.00
40
Extra over last 4 items for chain link fencing 1.8m high having three
(3) strands of two ply barb wire (13 gauge with 4 pointed barb at
75mm) on top.
15.00
90.00
41
PVC coated Chain link fencing 1.50m high consisting of 50mm x

50mm x 6mm painted mild steel angle post at 3.00m centres with
bottom end embedded in concrete (1:3:6 25mm aggregate) and
with 50mm diamond mesh (No. 10 S.W.G.) pvc coated chain link
fence, including three strands of No.8 galvanised straining wire and
including 50mm x 50mm x 6mm painted mild steel angle corner
struts with bottom end embedded in and including concrete (1:3:6
25mm aggregate) base.
- SR/47 -
Item Description
Unit
Rate
(RM)
nr
3,500.00
nr
1,500.00
nr
5,000.00
Spot turfing on level surfaces at 450mm centres in chequered pattern

and including 50mm bed of black earth as specified.
m2
3.50
46
Close turfing on level surfaces and including 50mm bed of black earth
as specified.
m2
6.00
47
Close turfing to banks on and including 50mm bed of black earth and
pegging, all as specified.
m2
6.50
m2
18.00
No.
FENCING (CONTD)
42
Mild steel double leaf gate size 4.90m wide x 1.50m high overall, each
leaf comprising of 150mm wide frame constructed of 3mm thick mild
steel plate welded to and including 2 No. 25mm x 25mm x 3mm mild
steel hollow section closed at ends with 6mm thick mild steel plate, top
and bottom rails constructed of 2 No. 3mm thick mild steel plate welded
to and including 2 No 50mm x 25mm x 3mm thick mild steel hollow
section closed at ends with 6mm thick mild steel plate, infilled with
20mm x 20mm mild steel hollow section vertical members at 125mm
centres closed at ends with 6mm mild steel plate, with and including
mild steel bolt and sleeve, lock plate, butt hinges, welding and painting.
43
Mild steel single leaf gate size 1.05m wide x 1.50m high ditto.
44
Mild steel sliding gate size 6.0m wide x 1.80m high, constructed of
100mm x 50mm mild steel hollow gate frame all around including
intermediate framing to be welded together to infilled with 25mm x
25mm mild steel hollow at 150mm centres, fixing all members
together, filling all welds smooth complete with sliding gate roller
track and painting with one coat metallic primer and three coat alkali
resin base paint or equivalent and approved and all necessary works
for proper completion.
TURFING
45
48
Turfing for playing fields including site preparation, 100mm thick river
sand, 100mm thick top soil, turfing with an average 50mm thick
earth bed, compaction, watering, weed control, mowing and top
dressing all as specified.
ROADSIDE DRAINS
49
300mm x 300mm Precast reinforced concrete semi elliptical channel

75mm thick including all necessary excavation.
18.60
50
375mm x 375mm Ditto.
24.10
51
450mm x 450mm Dito.
34.80
52
56.80
53
Ditto Type A R.C. Drain as specified.
250.00
54
Ditto Type B Ditto
350.00
55
Ditto Type C Ditto
450.00
25.50
53
50mm Thick precast concrete cover slab 300mm wide cast in

approximately 600mm length, notched at ends and reinforced with and
including one layer of 150mm (6G) steel fabric reinforcement and
placing in position.
- SR/48 -
Item Description
No.
Unit
Rate
(RM)
ROAD SIDE DRAINS (CONTD)
54
60mm Thick approved interlocking concrete paver block as specified,

laid on and including 30mm thick sand and 60mm thick hardcore bed
and all necessary excavation, all in accordance with the manufactures
instruction and as specified.
m2
85.00
55
80mm Ditto.
m2
95.00
56
100mm Ditto.
m2
105.00
m3
200.00
m3
200.00
230mm x 600mm Mild steel grating drain cover with welded

connection, comprising 50mm x 50mm x 6mm thick angle all round,
infilled with 40mm x 6mm thick flats at 30mm centres, painted with
one coat red oxide primer, set in and including forming rebate at top
of drain.
nr
50.00
60
nr
150.00
61
1200mm x 1200mm Dito.
nr
500.00
62
850mm x 850mm Mild steel grating as sump cover ditto.
nr
300.00
GABION
57
58
Supply and lay 1.0m x 1.0m x 1.0m PVC coated wire mesh rock filled.
Ditto 3.0m x 1.0m x 1.0m as specified.
MILD STEEL GRATING
59
KANDUNGAN
MUKA
BAB
SYARAT-SYARAT
TAMBAHAN PERATUSAN
- SR/49 -
JADUAL KADAR HARGA
BAB
2
BAHAGIAN I :
A
B
C
D
E
F
Wiring
Wiring
PVC/PVC Cable
PVC Cable
Lightning Protection System
Earth Protection System
BAHAGIAN II :
A
B
C
D
E
F
G
H
I
Fuse-Switch & Switch Fuse

Isolator
Tap Off Unit
Starter
Contactor
Breaker Unit
Neutral Communicator Unit
Fuse Base c/w Fuse Holder
High Breaking Capacity Fuse
BAHAGIAN III
A
B
C
D
E
Distribution Box
MCB, RCCB, RCBO, MCCB
Surge Protection Device
Power Factor Regulator, Capacitor
Mains Switch Board, Switch Board, CB
BAHAGIAN IV
A
B
C
D
E
F
G
Fully Insulated Switches

Metalclad Switches
Switch Panel
Switch System
Output Source
Wiring Components
Conduit & Trunking
BAHAGIAN V
A
B
C
D
E
F
Bulbs
Fluorescent
Standard / General Equipment
Downlight
Components & Spare Parts equipment
Fan, Fans Spare Parts
BAHAGIAN VI
A
D
Hot Dipped Galvanised Octagonal Mild Steel

Pole
Traffic Light System Accessories
BAHAGIAN VII
Low Voltage Underground Cable
BAHAGIAN VIII
A.
B.
C.
D.
E.
F.
G.
H.
Instant / Storage Water Heater

PN-10
MATV
Telephone
Networking
PA System
Stage Lighting / Accessories
Stage Curtain
- SR/50 -
PART I WIRING
NOTE: For white plate instead of metalclad, deduct RM5.00 to the Price below
No.
Item Description
Unit
Rate
(RM)
- SR/51 -
Supply and install all materials according to JKR Standard

Specification on surface wiring in conduit or conceal using
PVC cable c/w galvanized steel conduit/trunking and related
accessories.
Lamp point c/w 10A SP metalclad switch.
nr
130.00
Lamp point c/w 2 nos 2 way 10A SP metalclad switch.
nr
155.00
Lamp point c/w 2 nos 2 way & intermediate 10A SP metalclad

switch.
nr
200.00
Lamp point c/w 10A SP weather- proof metalclad switch.
nr
515.00
Lamp point c/w 2 nos 10A 2 way SP weather- proof metalclad

switch.
nr
725.00
Lamp point c/w 10A SP and bulb holder batten type horizontal lath
or angled Bakelite switch.
nr
140.00
Lamp point c/w 10A SP metalclad switch, ceiling rose and m 3

cores 24/0.20mm round pvc cable.
nr
130.00
Lamp point c/w 2 nos 10A SP metalclad switch, 2 way ceiling rose
and 1/2m 3 cores 24/0.20mm round pvc cables.
nr
155.00
Lamp point c/w 2 nos 2 way and intermediate 10A SP metalclad

switch, ceiling rose and 1/2m 3 cores 24/0.20mm round pvc cables.
nr
200.00
Lamp point c/w 1 way 10A ceiling switch.
nr
160.00
10
PART I - WIRING
- SR/52 -
No.
Item Description
Unit
Rate
(RM)
11
nr
190.00
12
Lamp point for Exit or Emergency Lamp (without switch).
nr
120.00
13
Wall mounted fan point c/w 10A SP metalclad switch and ceiling
rose.
nr
136.00
14
Exaust fan point c/w 10A SP metalclad switch and ceiling rose (not
including making hole).
nr
136.00
15
Ceiling fan point c/w 10A SP metalclad switch and 10A 3 way
connector.
nr
136.00
16
Ceiling fan point c/w 10A SP metalclad switch, 10A 3 way connector
and hanger hook.
nr
146.00
17
Ceiling fan point c/w 10A SP metalclad switch, 10A 3-way

connector, regulator board and hanger hook.
nr
156.00
18
Ceiling fan point c/w 10A SP metalclad switch, 10A 3-way connector
and regulator board.
nr
146.00
19
Socket outlet point c/w 13A metalclad switch socket outlet using
PVC cable:i)
2 x 2.5mm2
nr
210.00
ii)
nr
270.00
2 x 4mm2
20
Power point c/w 13A metalclad twin switch socket outlet.
nr
260.00
21
Power point c/w 13A metalclad weather proof switch socket outlet.
nr
380.00
22
Power point c/w 15A metalclad switch socket outlet.
nr
230.00
- SR/53 -
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)
23
Power point c/w 15A metalclad switch socket outlet at floor level
c/w pedestal box.
nr
230.00
24
Water heater point c/w 15A DP switch with pilot lamp and15A 3
plate junction box.
nr
330.00
25
Cooker Control Unit (CCU) point c/w 45A DP metalclad switch with
pilot lamp and 13A Switch Socket Outlet with pilot lamp.
nr
470.00
26
Clock point c/w 10A SP metalclad switch and connector.
nr
132.00
27
Main supply point to bell/buzzer/chime transformer and indicator

board c/w 10A metalclad SP switch.
nr
162.00
28
Bell point c/w 10A bell/buzzer/chime push button.
nr
162.00
29
A/C point up to 2HP using 2 x 4mm2 cable c/w DOL starter, 15A
socket outlet, 32A DP switch with pilot lamp and mounting board.
i. Not more than 15m from respective DB.
nr
360.00
ii. Between 15m to 30m from respective DB.
nr
590.00
iii. Between 30m to 60m from respective DB.
nr
910.00
Isolator point c/w 20A SPN metalclad isolator using 2 x 4mm2 c/w
cable protector.
nr
400.00
30
- SR/54 -
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)
31
cable protector.
nr
460.00
32
cable protector.
nr
750.00
33
Isolator point c/w 20A TPN metalclad isolator using 4 x 4mm2 c/w
cable protector.
nr
520.00
34
cable protector.
nr
615.00
35
cable protector.
nr
1,140.00
36
Fused switch point c/w 32A SPN metalclad fused switch using 2 x
6mm2 c/w cable protector.
nr
460.00
37
Fused switch point c/w 32A TPN metalclad fused switch using 4 x
nr
615.00
38
TV antenna point using 5c2v cable c/w TV socket.
nr
180.00
39
Emergency controlled centre start & stop point c/w emergency

start-stop button.
nr
165.00
40
Emergency stop point c/w emergency stop button.
nr
140.00
41
Bomba switch point c/w 15A Bomba switch.
nr
510.00
42
Cat.5 computer point c/w RJ45 socket outlet (up to 100m).
nr
480.00
- SR/55 -
PART I WIRING
NOTE: For white plate instead of metalclad, deduct RM5.00 to the Price below
No.
Item Description
UNIT
Rate
(RM)

Specification on surface wiring in conduit or conceal using
PVC cable c/w uPVC conduit/casing/trunking and related
accessories.
Lamp point c/w 10A SP metalclad switch.
nr
90.00
Lamp point c/w 2 nos 2 way 10A SP metalclad switch.
nr
115.00
Lamp point c/w 2 nos 2 way & intermediate 10A SP metalclad

switch.
nr
160.00
Lamp point c/w 10A SP weather- proof metalclad switch.
nr
475.00
Lamp point c/w 2 nos 10A 2 way SP weather- proof metalclad

switch.
nr
685.00
Lamp point c/w 10A SP and bulb holder batten type horizontal lath
or angled Bakelite switch.
nr
100.00
Lamp point c/w 10A SP metalclad switch, ceiling rose and m 3

cores 24/0.20mm round pvc cable.
nr
90.00
Lamp point c/w 2 nos 10A SP metalclad switch, 2 way ceiling rose
and 1/2m 3 cores 24/0.20mm round pvc cables.
nr
105.00
Lamp point c/w 2 nos 2 way and intermediate 10A SP metalclad

switch, ceiling rose and 1/2m 3 cores 24/0.20mm round pvc cables.
nr
160.00
nr
120.00
10
- SR/56 -
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)
11
nr
150.00
12
Lamp point for Exit or Emergency Lamp (without switch).
nr
80.00
13
Wall mounted fan point c/w 10A SP metalclad switch and ceiling
rose.
nr
96.00
14
Exaust fan point c/w 10A SP metalclad switch and ceiling rose (not
including making hole).
nr
96.00
15
Ceiling fan point c/w 10A SP metalclad switch and 10A 3 way
connector.
nr
96.00
16
Ceiling fan point c/w 10A SP metalclad switch, 10A 3 way connector
and hanger hook.
nr
106.00
17
Ceiling fan point c/w 10A SP metalclad switch, 10A 3-way

connector, regulator board and hanger hook.
nr
116.00
18
Ceiling fan point c/w 10A SP metalclad switch, 10A 3-way connector
and regulator board.
nr
106.00
19
Socket outlet point c/w 13A metalclad switch socket outlet using
PVC cable:i.
2 x 2.5mm2
nr
160.00
ii.
2 x 4mm2
nr
205.00
20
Power point c/w 13A metalclad twin switch socket outlet.
nr
195.00
21
Power point c/w 13A metalclad weather proof switch socket outlet.
nr
340.00
- SR/57 -
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)
22
Power point c/w 15A metalclad switch socket outlet.
nr
175.00
23
Power point c/w 15A metalclad switch socket outlet at floor level
c/w pedestal box.
nr
175.00
24
Water heater point c/w 15A DP switch with pilot lamp and15A 3
plate junction box.
nr
245.00
25
Cooker Control Unit (CCU) point c/w 45A DP metalclad switch with
pilot lamp and 13A Switch Socket Outlet with pilot lamp.
nr
350.00
26
Clock point c/w 10A SP metalclad switch and connector.
nr
90.00
27
Main supply point to bell/buzzer/chime transformer and indicator

board c/w 10A metalclad SP switch.
nr
120.00
28
Bell point c/w 10A bell/buzzer/chime push button.
nr
120.00
29
A/C point up to 2HP using 2 x 4mm2 cable c/w DOL starter, 15A
socket outlet, 32A DP switch with pilot lamp and mounting board:i. Not more than 15m from respective DB
nr
300.00
ii. Between 15m to 30m from respective DB
nr
490.00
iii. Between 30m to 60m from respective DB

30
cable protector.
- SR/58 -
nr
nr
760.00
335.00
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)
31
cable protector.
nr
380.00
32
cable protector.
nr
625.00
33
cable protector.
nr
430.00
34
cable protector.
nr
510.00
35
cable protector.
nr
1,140.00
36
Fused switch point c/w 32A SPN metalclad fused switch using 2 x
nr
380.00
37
Fused switch point c/w 32A TPN metalclad fused switch using 4 x
nr
510.00
38
TV antenna point using 5c2v cable c/w TV socket.
nr
150.00
39
Emergency controlled centre start & stop point c/w emergency

start-stop button.
nr
180.00
40
Emergency stop point c/w emergency stop button.
nr
115.00
41
Bomba switch point c/w 15A Bomba switch.
nr
425.00
42
Cat.5 computer point c/w RJ45 socket outlet (up to 100m).
nr
400.00
- SR/59 -
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)

Specification on surface wiring or concealed as follows:PVC/PVC cable
2 x 6mm2 c/w conductor protection.
15.00
25.00
38.00
60.00
80.00
25.00
40.00
62.00
98.00
10
135.00
11
175.00
12
250.00
13
370.00
14
580.00
- SR/60 -
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)
PVC insulated round flexible cable

15
2 core, 23/0.16mm2.
3.50
16
3 core, 23/0.16mm2.
4.60
17
3 core, 40/0.16mm2
5.90
18
3 core, 70/0.16mm2.
7.80
5.00
2 core twin flat PVC insulated and shealthed (covered)

cable:19
2.5mm2.
- SR/61 -
PART I - WIRING
No.
Item Description
Unit
Rate
(RM)
Supply and install in conduit, trunking or galvanized steel

cable tray according to existing regulation:PVC cable:-
17.00
25.00
36.00
55.00
75.00
25.00
38.00
57.00
87.00
10
115.00
11
140.00
12
205.00
13
235.00
14
265.00
- SR/62 -
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)
E.
Supply, installation and testing

Lightning Protection System in
specification.
component parts for

accordance with IEE
Copper Tape 25mm x 3mm c/w copper tape saddle 25mm installed
in between test connectors with test connectors.
100.00
High density air final copper rod 16mm diameter x 610mm (2) c/w
copper base plate.
set
150.00
copper base plate.
set
300.00
copper base plate.
set
450.00
Brass type test connector c/w 2 diameter PVC pipe from test
connector to ground (soil).
set
345.00
Earthing point consisting of component parts as the following: -
nr
600.00
i) Steel core, copper conduited / laminated / covered earth

electrode 16mm(5/8) x 3568mm(12) long.
ii)
Steel or copper clip for 16mm (5/8) diameter copper earth

electrode.
iii) Prefilled concrete earth chamber with heavy duty type

detachable (re-installable) cover.
iv) 25mm x 3mm copper tape (1 x 1/8) installed either in
between test connector with earth electrode or in between
earth electrode and earth electrode (between rods).
- SR/63 -
PART I - WIRING
No.
Item Description
UNIT
Rate
(RM)
F.
Supply, installation and testing component parts for Earth

Protection System in accordance with IEE specification.
Copper Tape 25mm x 3mm installed in between switch box and test
Panel.
100.00
Earthing point consisting of component parts as the following: -
lot
600.00
i) Steel core, copper conduited / laminated / covered earth

electrode 16mm(5/8) x 3568mm(12) long.
ii)
Steel or copper clip for 16mm (5/8) diameter copper earth

electrode.
iii) Prefilled concrete earth chamber with heavy duty type

detachable (re-installable) cover.
iv) 25mm x 3mm copper tape (1 x 1/8) installed either in
between test connector with earth electrode or in between
earth electrode and earth electrode (between rods).
- SR/64 -
PART II - SWITCHING APPARATUS, FUSES, CONTROLLING APPARATUS

No.
Item Description
UNIT
Rate
(RM)
Supply and install:A
Fuse switch and switch fuse

Fused-switch, TPN, 500 volt, surface mounted metalclad c/w HBC
fuse switch.
60A/63A
nr
1,056.00
100A
nr
1,145.00
150A or 160A
nr
1,518.00
200A
nr
1,626.00
300A
nr
1,934.00
Fused-switch, TPN, 500 volt, metalclad box c/w HBC fuse switch
6
60A/63A
nr
984.00
100A
nr
1,033.00
150A or 160A
nr
1,420.00
200A
nr
1,520.00
10
300A
nr
1,724.00
Fused-switch, SPN, 250 volt,metalclad c/w HBC fuse switch

11
20A
nr
215.00
12
30A/32A
nr
246.00
13
60A/63A
nr
335.00
Fused-switch, TPN, 500 volt, surface mounted metalclad c/w HBC

fuse switch
14
20A up to 30A/32A
nr
563.00
15
60A/63A
nr
741.00
16
100A
nr
950.00
- SR/65 -
No.
Item Description
UNIT
Rate
(RM)
Fused-switch, TPN, 500 volt, metalclad box c/w HBC fuse switch:17
20A up to 30A/32A
nr
613.00
18
60A/63A
nr
763.00
19
100A
nr
892.00
Fused-switch, SPN, 250 volt, fully insulated c/w HBC fuse switch:20
20A up to 30A/32A
nr
206.00
21
60A/63A
nr
294.00
Supply and install

B
Isolator:
Isolator, DP 250V, metalclad:
20A
nr
220.00
30A/32A
nr
250.00
60A/63A
nr
300.00
Isolator, TPN, 500v, metalclad:4
20A
nr
300.00
30A/32A
nr
420.00
60A/63A
nr
530.00
100A/125A
nr
800.00
Supply and install

C
1
Tap Off Unit

30A up to 80A
set
180.00
100A up to 200A
set
200.00
- SR/66 -

No.
Item Description
UNIT
Rate
(RM)
Supply & install

D
Controlling Apparatus and Protection Equipment:-
Motor starter, DOL single phase up to 3HP with thermal overload

protection and indicator lamps.
nr
269.00
Motor starter, DOL three phase up to 3HP with thermal overload

protection and indicator lamps.
nr
369.00
Metalclad motor starter, star- delta three phase up to 10HP with

thermal overload protection and indicator lamps.
nr
656.00
Contactor:Supply and install including all interloping cable, screws, bolts, nuts,
washers and others
Single Pole and Neutral Contactor.
10A
nr
150.00
20A
nr
180.00
30A
nr
240.00
60A
nr
300.00
Three Poles Contactor and Neutral.

5
20A
nr
240.00
30A
nr
300.00
60A
nr
360.00
100A
nr
600.00
- SR/67 -

No.
Item Description
UNIT
Rate
(RM)
Breaker unit c/w fuse communicator:-
30A/32/A
nr
54.00
60A/63/A
nr
69.00
100A
nr
89.00
Neutral communicator unit:-
30A/32A
nr
26.00
60A/63A
nr
28.00
100A
nr
36.00
Fuse Base c/w fuse loader (for HBC fuse)
10A up to 20A
nr
11.00
32A
nr
13.00
63A
nr
17.00
80A
nr
35.00
100A
nr
40.00
125A
nr
126.00
160A
nr
126.00
200A
nr
126.00
- SR/68 -
No.
Item Description
UNIT
Rate
(RM)
High breaking capacity fuse, suitable for fuse loader or

switching apparatus:-
10A up to 20A
nr
8.00
32A
nr
10.00
45A
nr
12.00
63A
nr
18.00
80A
nr
25.00
100A
nr
29.00
125A
nr
34.00
160A
nr
38.00
200A
nr
39.00
10
250A
nr
78.00
11
300A
nr
93.00
12
400A
nr
129.00
PART III DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/69 -
No.
Item Description
UNIT
Rate
(RM)
Supply and install distribution box c/w miniature circuit

breaker MCB
Metalclad distribution box, SPN c/w MCB up to 32A breaking
capacity 6kA:-
4 ways
nr
355.00
6 ways
nr
380.00
8 ways
nr
410.00
10 ways
nr
450.00
12 ways
nr
495.00
14 ways
nr
520.00
Metalclad distribution box, TPN c/w MCBs up to 32A breaking

capacity 6kA:7
4 ways
nr
775.00
6 ways
nr
860.00
8 ways
nr
955.00
10
10 ways
nr
1,095.00
11
12 ways
nr
1,225.00
12
14 ways
nr
1,456.00
13
Sub division unit, fully insulated, SPN, 2 way, 15A/16A 6kA mcbs.
nr
220.00
- SR/70 -

No.
Item Description
UNIT
Rate
(RM)
Supply and install additional to Distribution Box and Main

switch box
Miniature Circuit Breaker (MCB)
MCB 1P up to 40A, breaking capacity 6kA
nr
39.00
63A 240V 1P MCB, breaking capacity 6kA
nr
68.00
nr
156.00
nr
160.00
nr
170.00
Up to 32A 240V 2P MCB, breaking capacity 6kA
nr
110.00
nr
120.00
nr
200.00
nr
310.00
10
nr
339.00
11
nr
357.00
12
nr
177.00
13
nr
188.00
14
nr
339.00
15
nr
468.00
16
nr
494.00
17
nr
558.00
18
nr
210.00
19
nr
232.00
20
nr
410.00
21
nr
688.00
- SR/71 -

No.
Item Description
UNIT
Rate
(RM)
22
nr
722.00
23
nr
817.00
Residue Current Circuit Breaker (RCCB)

24
RCCB, 240V double pole,40A 30mA
nr
280.00
25
nr
180.00
26
RCCB, 240V double pole, 40A 300mA
nr
315.00
27
nr
296.00
28
nr
250.00
29
nr
390.00
30
RCCB, 500V four pole,40A 30mA
nr
500.00
31
RCCB, 500V four pole, 40A 100mA
nr
384.00
32
nr
298.00
33
nr
730.00
34
nr
520.00
- SR/72 -

No.
Item Description
UNIT
Rate
(RM)
35
nr
309.00
Residue Current Circuit Breaker protected against

nuisance tripping type
36
nr
290.00
37
nr
188.00
38
nr
345.00
39
nr
405.00
40
nr
258.00
41
nr
405.00
42
RCCB, 240V double pole,63A 300mA with time delay
nr
678.00
43
nr
552.00
44
nr
495.00
45
nr
557.00
46
RCCB, 240V double pole,100A 300mA with time delay
nr
1,056.00
- SR/73 -

No.
Item Description
UNIT
Rate
(RM)
47
RCCB, 500V 4 pole,40A 30mA
nr
519.00
48
nr
393.00
49
nr
302.00
50
nr
777.00
51
nr
519.00
52
nr
318.00
53
RCCB, 500V 4 pole, 63A 300mA with time delay
nr
470.00
54
nr
942.00
55
nr
666.00
56
RCCB, 500V 4 pole, 80A 300mA with time delay
nr
998.00
57
nr
945.00
58
nr
1,331.00
- SR/74 -

No.
Item Description
UNIT
Rate
(RM)
Residue Current Circuit Breaker with overcurrent circuit

breaker (RCBO).
59
6A to 25A 6kA 240V DP 30mA RCBO
nr
948.00
60
32A 6kA 240V DP 30mA RCBO
nr
1,600.00
61
6A to 25A 6kA 240V DP 300mA RCBO
nr
885.00
62
32A 6kA 240V DP 300mA RCBO
nr
1,438.00
nr
435.00
30kA SPN Moulded Case Circuit Breaker

63
30A up to 60A
30kA TPN MCCB (Ics: 100% Icu)
64
30A up to 100A
nr
650.00
65
125A up to 160A
nr
780.00
66
200A
nr
970.00
67
From 225A up to 250A
nr
1,120.00
68
nr
1,700.00
- SR/75 -

No.
Item Description
UNIT
Rate
(RM)

69
30A up to 100A
nr
765.00
70
125A up to 160A
nr
980.00
71
200A
nr
1,100.00
72
nr
1,275.00
73
nr
1,560.00

74
30A up to 100A
nr
595.00
75
125A up to 160A
nr
720.00
76
200A
nr
925.00
77
nr
1,075.00
78
nr
1,630.00

79
30A up to 100A
nr
720.00
80
125A up to 160A
nr
870.00
81
200A
nr
1,080.00
82
nr
1,250.00
83
nr
1,500.00
- SR/76 -

No.
Item Description
UNIT
Rate
(RM)

84
30A up to 100A
nr
1,375.00
85
125A
nr
1,710.00
86
160A
nr
2,145.00
87
200A
nr
2,240.00
88
250A
nr
2,500.00
89
400A
nr
4,100.00
90
630A
nr
7,150.00
91
800A
nr
9,985.00
92
1000A
nr
15,680.0
0
93
1250A
nr
18,600.0
0
94
1600A
nr
20,980.0
0

95
30A up to 100A
nr
2,550.00
96
125A up to 160A
nr
5,440.00
97
nr
6,600.00
98
400A
nr
8,900.00
99
630A
nr
15,300.0
0
100
800A
nr
24,400.0
0
101
1000A
nr
38,160.0
0
- SR/77 -

No.
UNIT
Item Description
Rate
(RM)
Supply & install
Surge Protection Device (SPD)

IEC 61643-1/EN61643-11, IEEE C 62,41 Cat C & B
BS6651-1992- Cat C & B
Note: Switch Fuse Selection should be 3 pole or 4 pole, 63A to 125A
1.1
At Main Switchboard with Class II Protection

TT Network 240V
Protection
Aggregate Surge Rating
415V
Mode
(8/20uS)
Per Phase
Total
3P + N
3+1
80/120kA
360kA
1P + N
1+1
80kA
160kA
3P + N
Common
80kA
320kA
3P + N
7 mode
80kA
560kA
set
set
set
set
2,500.00
1,250.00
2,500.00
5,000.00
At Main Switchboard or sub switchboard with Class II Protection

TT Network 240V
Protection
415V
Mode
(8/20uS)
Per Phase
Total
a.
3P + N
3+1
40kA
200kA
b.
1P + N
1+1
40kA
120kA
c.
3P + N
Common
40kA
160kA
d.
3P + N
7 mode
40kA
280kA
set
set
set
set
1,500.00
745.00
1,400.00
2,900.00
set
set
set
940.00
500.00
2,100.00
a.
b.
c.
d.
1.2
1.3
At sub switchboard with Class II Protection

TT Network 240V
Protection
415V
Mode
a.
b.
c.
3P + N
1P + N
3P + N
3+1
1+1
7 mode

(8/20uS)
Per Phase
Total
25kA
175kA
25kA
65kA
25kA
175kA
- SR/78 -

No.
Item Description
UNIT
Rate
(RM)
Power Factor Regulators, Capacitors

Supply and install front access self standing flush fronted cubicle as
per IEE with the following capacitor rating:-
1.
30 KVAr Capacitor Bank Control Panel comprising of :

1 x 60A TPN MCCB
1 x 8 steps Power Factor Regulator
6 x 5KVAr Capacitor Bank 525V c/w 7% Reactor
6 x 10A TPN Contactor
9 x Indicating Light c/w Control fuse
18 x HRC Fuse (including internal wiring)
set
9,500.00
set
10,500.0
0
set
11,500.0
0
set
12,000.0
0
2.
1 x 125A TPN MCCB

3.
4.
1 x 160A TPN MCCB

1 x 200A TPN MCCB
- SR/79 -

No.
Item Description
UNIT
Rate
(RM)
5.
set
17,500.0
0
set
21,500.0
0
set
23,500.0
0
set
27,000.0
0
1 x 300A TPN MCCB

6.
7.
1 x 400A TPN MCCB

1 x 630A TPN MCCB
8.
1 x 630A TPN MCCB

- SR/80 -

No.
Item Description
UNIT
Rate
(RM)
Distribution Board, Mains Switch Board, Switch Board

Supply and Install including interlooping cable, screws, bolts, nuts,
washers and others
Front /Rear Access Self Standing metalclad switchboard cubicle as

per IEE and consisting of the following items of equipment and
accessories
a. 4 Nos. 6mm x 25mm tinned hard drawn high conductivity
copper busbars;
b. 1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle;
c.
3 Nos indicating lights (red, yellow and blue) as supply
indicators;
set
2,500.00
Front /Rear Access Self Standing metalclad switchboard cubicle as

per IEE and consisting of the following items of equipment and
accessories;
a. Incoming cable terminating box or heat shrinkable termination
kit or cable gland;
b. 3 Nos ammeter c/w selector switch and CTs;
c. 1 Nos. 0 600V voltmeter c/w selector switch;
d. 3 Nos indicating lights (red, yellow and blue) as SESB supply
indicators;
e. control fuses;
f.
1 set ELR c/w CTs;
g. Anti-condensation heater c/w automatic thermostat control,
ON-OFF switch and indicating light;
h. All internal wiring
i.
4 Nos. 6mm x 25mm tinned hard drawn high conductivity
copper busbars;
j.
1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle
set
6,000.00
Wall mounted metalclad switchboard cubicle as per IEE and

consisting of the following items of equipment and accessories
copper busbars;
set
2,000.00
b.
c.
d.
e.
1 Nos. 6mm x 25mm tinned copper earthing bar extending full

width of cubicle;
3 Nos indicating lights (red, yellow and blue) as supply
indicators;
control fuses;
All internal wiring
- SR/81 -

No.
Item Description
UNIT
Rate
(RM)

copper busbars;
b. 1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle;
c. Incoming cable terminating box or heat shrinkable termination
kit or cable gland;
d. 3 Nos 0-300A ammeters with MD indicators;
e. 1 Nos. 0 600V voltmeter c/w selector switch;
f.
1 Nos. power factor meter;
g. 3 Nos indicating lights (red, yellow and blue) as SESB supply
indicators;
h. 1 set 300/5A Class 1.0 15VA C.T.s;
i.
control fuses;
j.
All internal wiring
set
4,500.00

f.
4 Nos. 6mm x 25mm tinned hard drawn high conductivity
copper busbars;
g. 1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle;
h. 1 Nos 0-300A ammeter c/w selector switch;
i.
1 Nos. 0 600V voltmeter c/w selector switch;
j.
3 Nos indicating lights (red, yellow and blue) as SESB supply
indicators;
k. 1 set 300/5A Class 1.0 15VA C.T.s;
l.
control fuses;
m. All internal wiring
set
3,500.00
- SR/82 -

No.
Item Description
UNIT
Rate
(RM)
MSB consisting of the following ;

a. Incoming cable terminating box or heatshrinkable termination
kit;
b. 1 Nos. 0-600V voltmeter c/w selector switch;
c. 1 Nos. power factor meter c/w its own CTs;
d. 3 Nos Ammeters with MD indicators c/w its own CTs;
e. 1 set E/F and O/C relay, type IDMT c/w CTs;
f.
3 Nos indicating lights (RYB);
g. Anti-condensation heater c/w automatic thermostat control,
ON-OFF switch and indicating light;
h. 1 Nos. 6mm x 50mm tinned copper earthing bar extending the
full width of the cubicle;
i.
4 Nos. 6mm x 50mm tinned copper busbar;
j.
control fuses;
k. All internal wiring.
set
8,500.00
Supply and Install at the switchboard/sub-switchboard (including

internal wiring) the following fuses to act as incoming fuseswitches;
a. 300A TPN c/w fuse links
b. 200A TPN c/w fuse links
c. 160A TPN c/w fuse links
d. 100A TPN c/w fuse links
e. 60A TPN c/w fuse links
set
set
set
set
set
1,200.00
1,000.00
950.00
600.00
530.00

internal wiring and interconnection) the following MCCBs as
incoming MCCBs. The MCCBs shall complete with built-in ELR;
a. 30A 43kA TPN
b. 60A 43kA TPN
c. 80A/100A 43kA TPN
d. 160A 43kA TPN
e. 200A 43kA TPN
f. 250A 43kA TPN
g. 300A 43kA TPN
Set
Set
Set
Set
Set
Set
Set
2,300.00
2,300.00
2,300.00
2,500.00
3,480.00
3,480.00
4,680.00
- SR/83 -

No.
Item Description
UNIT
Rate
(RM)

internal wiring and interconnection tinned busbars) the following
Air Circuit Breakers (ABCs) as incoming ACBs.
a.
The ACBs shall have Breaking Capacity (Icu / Icw) of 50kA /

50kA with a short time rating of 1 second;
1. 800A 50kA/50kA 1 sec TPN Fixed type
set
11,525.0
0
2. 800A 50kA/50kA 1 sec TPN Drawout type
set
17,120.0
0
3. 800A 50kA/50kA 1 sec 4 Pole Fixed type
set
14,645.0
0
4. 800A 50kA/50kA 1 sec 4 Pole Drawout type
set
21,500.0
0
set
13,450.0
0
set
19,050.0
0
set
16,520.0
0
set
23,370.0
0
set
15,100.0
0
set
20,700.0
0
set
18,350.0
0
set
25,200.0
0
set
16,870.0
0
set
17,120.0
0
set
22,465.0
0
set
26,900.0
0
set
24,370.0
0
- SR/84 -
set
31,265.0
0
set
27,820.0
0
set
36,390.0
0

No.
Item Description
UNIT
Rate
(RM)
b.
The ACBs shall have Breaking Capacity (Icu / Icw) of 65kA /

65kA with a short time rating of 1 second;
set
set
set
19,010.00
set
25,870.00
set
17,805.00
set
set
20,880.00
set
27,735.00
set
19,470.00
set
set
22,700.00
set
29,550.00
set
21,010.00
set
set
24,410.00
set
31,265.00
set
28,740.00
set
- SR/85 -
15,885.00
21,485.00
23,405.00
25,070.00
26,615.00
35,630.00
set
32,180.00
set
40,750.00
PART IV COMPLETE ELECTIRCAL EQUIPMENT

No.
Item Description
UNIT
Rate
(RM)
Supply and install: A
Fully insulated switch

Flat plated switch, single pole
10A, 1 gang 1 way.
nr
10.20
10A, 2 gang 1 way.
nr
17.60
10A, 3 gang 1 way.
nr
30.30
10A, 4 gang 1 way.
nr
20.90
10A, 1 gang 2 way.
nr
13.50
10A, 1 gang intermediate.
nr
37.90
10A, 2 gang 2 way.
nr
23.40
10A, 3 gang 2 way.
nr
36.80
Flat plated switch, double pole without pilot lamp.

9
20A.
nr
21.00
10
30A.
nr
31.00
11
45A.
nr
49.40
Flat plated switch, double pole with pilot lamp.

12
20A.
nr
33.60
13
30A.
nr
64.00
14
45A.
nr
82.00
Switch, ceiling.
- SR/86 -
15
10A, 1 way.
nr
75.30
16
10A, 2 way.
nr
69.60
- SR/87 -

No.
Item Description
UNIT
Rate
(RM)
Surface switch, double pole without pilot lamp.

17
20A.
nr
20.90
18
30A.
nr
26.90
19
45A.
nr
49.40
Surface switch, double pole with pilot lamp.

20
20A.
nr
23.40
21
30A.
nr
32.10
22
45A.
nr
58.90
Push button bell switch / buzzer / chime.

23
Fully insulated 10A surface mounted.
nr
11.10
24
10A flat plate.
nr
9.90
Timer switch.
25
20A with 8 hrs storage spring.
nr
349.40
26
30A with 8 hrs storage spring.
nr
427.00
27
10A -16A quartz type c/w battery.
nr
96.00
- SR/88 -

No.
Item Description
UNIT
Rate
(RM)
Metalclad switches.
SP switch.
10A, 1 gang 1 way.
nr
8.80
10A, 2 gang 1 way.
nr
13.40
10A, 3 gang 1 way.
nr
19.60
10A, 4 gang 1 way.
nr
22.60
10A, 1 gang 2 way.
nr
12.10
10A, 1 gang Intermediate.
nr
45.90
10A, 2 gang 2 way.
nr
18.40
10A, 3 gang 2 way.
nr
24.60
Weather proof switches.

9
10A, 1 way.
nr
146.40
10
10A, 2 way.
nr
155.50
11
10A, intermediate.
nr
164.40
12
15A, 1 way.
nr
146.40
13
20A, 1 way.
nr
173.50
Double pole switch without pilot lamp.

14
20A
nr
70.70
15
30A
nr
81.90
16
45A
nr
94.40
17
60A
nr
184.40
- SR/89 -
No.
Item Description
UNIT
Rate
(RM)
Double pole switch with pilot lamp

18
20A
nr
91.90
19
30A
nr
101.90
20
45A
nr
120.70
21
60A
nr
196.90
- SR/90 -

No.
Item Description
UNIT
Rate
(RM)
C
1
Switch Panel
Time Switch Control Panel comprising the following components:a. 1 Nos. 10A DP Time switch (Quartz)
b. 1 Nos. 63 A TPN contactor (AC3)
c. 1 Nos. 63A TPN Switch Fuse;
d. 1 Nos. 63A rotary type TPN changeover switch
set
800.00
Time Switch Control Panel comprising the following components:a. 1 Nos. 10A DP Time switch (Quartz)
b. 1 Nos. 32 A TPN contactor (AC3);
c. 1 Nos. 32A TPN Switch Fuse;
d. 1 Nos. 32A rotary type TPN changeover switch
set
700.00
Photo cell
one
75.00
D
1
Switch System
Wall mounted Recess Mount Stainless Steel Grid Switch System
comprising of stainless steel plate and panel mounting clips
set
set
set
95.00
190.00
285.00
set
set
set
126.00
175.00
221.00
one
one
one
one
one
one
11.00
12.00
25.00
30.00
29.00
31.00
one
31.00
1. 8 aperture grid system c/w recess metal box

2
Wall mounted Surface Mount Stainless Steel Grid Switch System

comprising of stainless steel plate and panel mounting clips
1. 9 aperture grid system c/w surface metal box
Switch Modules for use with the above System

1. 1 or 2 way 10A SP switch module
2. 1 way 10A SP switch module c/w Bell symbol
3. 1 way 20A DP switch module
4. 1 way 20A DP switch module c/w neon indicator
5. 2 way 20A DP switch module
6.
2 way 20A SP spring return shrouded push button switch
module c/w red or green button
7. 2 way 20A SP spring return mushroom push button switch
module c/w red or green button
- SR/91 -
No.
Item Description
UNIT
Rate
(RM)
Output Source (OS) with or without switch, fully insulated

or metalclad.
15A
nr
22.60
nr
20.40
OS without switch, flat platted, fully insulated.

2
15A
OS surface switch, fully insulated c/w metal box.
13A, 1 gang.
nr
19.30
13A, 2 gang.
nr
40.40
13A, 1 gang l/d lampu penunjuk.
nr
21.80
nr
44.40
15A.
nr
29.00
15A, l/d lampu penunjuk.
nr
36.50
OS flat platted switch, fully insulated.

9
13A, 1 gang.
nr
16.80
10
13A, 2 gang.
nr
26.60
11
nr
13.30
12
nr
31.10
13
15A.
nr
18.60
14
15A l/d lampu penunjuk.
nr
27.80
OS with metalclad switch.

15
13A, 1 gang.
nr
29.80
16
13A, 2 gang.
nr
50.00
17
nr
32.00
18
nr
56.80
19
15A.
nr
35.40
20
15A l/d lampu penunjuk.
nr
42.10
- SR/92 -

No.
Item Description
UNIT
Rate
(RM)
21
Bakelite mounting box for surface mounted flat switch.
nr
7.80
22
Metalclad mounting box for surface mounted metalclad flat

switch/socket.
nr
7.80
23
Metalclad mounting box for concealed metalclad switch/socket.
nr
12.20
Wiring components.
Bakelite based bulb holder.
nr
4.40
Bakelite framed bulb holder.
nr
5.70
Bakelite angle framed bulb holder.
nr
8.20
Bakelite wedged bulb holder.
nr
5.70
Earthen-ware based bulb holder.
nr
6.30
Brass based bulb holder.
nr
8.20
E27 earthen-ware based bulb holder.
nr
8.80
E40 earthen-ware based bulb holder.
nr
9.40
B22 earthen-ware based bulb holder.
nr
9.40
10
3 pin earthen-ware insulated based bulb holder.
nr
6.90
11
5A 3plate bakelite ceiling rose.
nr
6.70
12
15A bakelite rounded junction box.
nr
5.70
13
30A bakelite square junction box.
nr
8.20
14
60A bakelite square junction box.
nr
10.70
- SR/93 -
No.
Item Description
UNIT
Rate
(RM)
15
200mm diameter electric bell (230V single phase type).
nr
175.00
16
250mm diameter electric bell (230V single phase type).
nr
255.00
17
60mm diameter electric bell 5V ac.
nr
78.00
18
2 tone electric chime 8V ac.
nr
85.00
19
Electric buzzer 8V ac.
nr
76.00
20
230V/5-8V step down transformer for bell or chime or buzzer.
nr
85.00
SESB Metering Panel / Board

Supply and install metering panel in compliances with SESB/IEE
specification
21
Metalclad meter board for SESB meter.
nr
350.00
22
Metalclad meter board for SESB meter with see through window.
nr
650.00
- SR/94 -

No.
Item Description
UNIT
Rate
(RM)
G.
Apparatus complete with conduit and trunking.

Conduit, galvanized steel with equal matching thickness.
19mm ( )g.p.
nr
5.60
25mm ( 1 )g.p.
nr
7.00
32mm ( 1 )g.p.
nr
9.30
38mm ( 1 )g.p.
nr
11.60
51mm ( 2 )g.p.
nr
25.90
102mm ( 4 )g.p.
nr
43.00
152mm ( 6 )g.p.
nr
84.70
T box galvanized steel c/w cover.

8
19mm ( )g.p.
nr
5.40
25mm ( 1 )g.p.
nr
6.80
10
32mm ( 1 )g.p.
nr
9.90
11
38mm ( 1 )g.p.
nr
11.40
12
51mm ( 2 )g.p.
nr
15.80
Direct passage box galvanized c/w cover.

13
19mm ( )g.p.
nr
6.00
14
25mm ( 1 )g.p.
nr
6.90
15
32mm ( 1 )g.p.
nr
13.00
16
38mm ( 1 )g.p.
nr
13.00
17
51mm ( 2 )g.p.
nr
20.00
Terminal galvanized steel box c/w cover.

18
19mm ( )g.p.
nr
6.00
19
25mm ( 1 )g.p.
nr
6.90
20
32mm ( 1 )g.p.
nr
13.00
21
38mm ( 1 )g.p.
nr
13.00
22
51mm ( 2 )g.p.
nr
19.20
- SR/95 -

No.
Item Description
UNIT
Rate
(RM)
Galvanised steel inspection bend c/w cover.

23
19mm ( )g.p.
nr
6.10
24
25mm ( 1 )g.p.
nr
7.50
25
32mm ( 1 )g.p.
nr
11.30
26
38mm ( 1 )g.p.
nr
17.10
27
51mm ( 2 )g.p.
nr
22.10
Galvanised steel elbow.

28
19mm ( )g.p.
nr
4.90
29
25mm ( 1 )g.p.
nr
5.60
30
32mm ( 1 )g.p.
nr
8.90
31
38mm ( 1 )g.p.
nr
9.80
32
51mm ( 2 )g.p.
nr
13.90
Galvanised steel ceiling box c/w cover.

33
19mm ( )g.p.
nr
6.00
34
25mm ( 1 )g.p.
nr
6.90
35
32mm ( 1 )g.p.
nr
13.00
36
38mm ( 1 )g.p.
nr
13.00
37
51mm ( 2 )g.p.
nr
19.20
Earth copper clip for conduit c/w bolt, nut and acc.
38
19mm ( )g.p.
nr
1.80
39
25mm ( 1 )g.p.
nr
2.00
40
32mm ( 1 )g.p.
nr
2.50
41
38mm ( 1 )g.p.
nr
3.30
42
51mm ( 2 )g.p.
nr
3.90
- SR/96 -

No.
Item Description
UNIT
Rate
(RM)
Galvanised steel socket for conduit.

43
19mm ( )g.p.
nr
1.90
44
25mm ( 1 )g.p.
nr
2.20
45
32mm ( 1 )g.p.
nr
2.90
46
38mm ( 1 )g.p.
nr
4.50
47
51mm ( 2 )g.p.
nr
8.90
Conduit, rigid high impact PVC.

48
19mm ( )g.p.
3.30
49
25mm ( 1 )g.p.
4.10
50
32mm ( 1 )g.p.
8.50
51
38mm ( 1 )g.p..
11.80
52
51mm ( 2 )g.p.
15.00
Wrapper, rigid high impact PVC.

53
19mm ( )g.p.
2.40
54
25mm ( 1 )g.p.
2.60
55
32mm ( 1 )g.p.
2.90
56
38mm ( 1 )g.p.
3.10
57
51mm ( 2 )g.p.
3.40
Conduit, galvanized steel bend.

58
19mm ( )g.p.
2.70
59
25mm ( 1 )g.p.
3.40
60
32mm ( 1 )g.p.
4.60
61
38mm ( 1 )g.p.
6.30
62
51mm ( 2 )g.p.
6.40
- SR/97 -

No.
Item Description
UNIT
Rate
(RM)
Galvanised steel trunking SWG 18 c/w cover.

63
51mm x 51mm ( 2" x 2" )
13.30
64
51mm x 76mm ( 2" x 3" )
16.40
65
51mm x 102mm ( 2" x 4" )
18.90
66
76mm x 76mm ( 3" x 3" )
21.50
67
76mm x 106mm ( 3" x 4" )
23.40
68
76mm x 204mm ( 3" x 6" )
24.40
Galvanised steel trunking SWG 16 c/w cover.

69
76mm x 152mm ( 3" x 6" )
37.10
70
102mm x 102mm ( 4" x 4" )
32.90
71
102mm x 152mm ( 4" x 6" )
40.80
72
102mm x 204mm ( 4" x 8" )
50.80
73
102mm x 254mm ( 4" x 10" )
59.50
74
102mm x 305mm ( 4" x 12" )
68.20
Cable supporting tray, galvanized steel SWG 14 c/w steel

hugger.
75
76mm width (3")
11.10
76
102mm width (4")
12.60
77
127mm width (5")
14.90
78
152mm width (6")
18.40
22.50
Cable supporting tray, galvanized steel SWG 14 c/w steel

hugger.
79
204mm width (8")
- SR/98 -

No.
Item Description
UNIT
Rate
(RM)
80
254mm width (10")
27.50
81
305mm width (12")
30.50
Metal board, SWG 16 c/w alloy bush, bolt and ramset nut.
82
152mm x 229mm x 508mm (6" x 9" x 20").
nr
200.00
83
152mm x 254mm x 508mm (6" x 10" x 20").
nr
200.00
84
152mm x 305mm x 508mm (6" x 12" x 20").
nr
200.00
85
229mm x 254mm x 508mm (9" x 10" x 20").
nr
238.00
86
229mm x 305mm x 76mm (9" x 12" x 3").
nr
113.00
87
305mm x 305mm x 76mm (12" x 12" x 3").
nr
138.00
88
305mm x 457mm x 76mm (12" x 18" x 3").
nr
163.00
89
457mm x 457mm x 76mm (18" x 18" x 3").
nr
200.00
- SR/99 -
PART V LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS

No.
Item Description
UNIT
Rate
(RM)
Supply and install:

A
Bulbs:
Bulbs, tungsten filament 240V B22/E27, 15W, 40W, 100W

clear or frost.
nr
3.00
Coloured round bulb.
nr
3.00
Bulbs, pigmi coloured, tungsten filament 240V, B22, 5W,

15W.
nr
3.70
Candle shaped bulb up to 60W.
nr
4.00
Bulbs, spot or floodlight PAR 38 240V, E27, 100W/150W.
nr
22.00
Bulbs, tungsten halogen 240V base R75-15, 300/500W.
nr
25.00
Bulbs, mercury vapour (MBF), 240V, insulated based, 3 pin,

80W.
nr
24.00
Bulbs, mercury vapour (MBF), 240V, insulated based, 3 pin,

125W.
nr
28.00
Bulbs, mercury vapour (MBF), 240V, E40, 250W.
nr
33.00
10
Bulbs, mercury vapour (MBF), 240V, E40, 400W.
nr
63.00
11
Bulb, High pressure sodium vapour (SON), 240V, E27, 70W.
nr
57.00
12
nr
60.00
13
nr
67.00
- SR/100 -

No.
Item Description
UNIT
Rate
(RM)
14
Bulb, High pressure sodium vapour (SON), 240, E40, 400W.
nr
75.00
15
Bulb, metal halide, 240V, E40, 250W.
nr
105.00
16
nr
115.00
17
nr
324.00
18
Tube, 600mm fluorescent, 18W, two pins (G13), min 2500

lumen.
nr
7.00
19

lumen.
nr
9.00
20

lumen.
nr
14.00
21

lumen.
nr
10.00
22

lumen.
nr
10.00
23
Tube, 22W fluorescent, round.
nr
14.00
24
Tube, 32W fluorescent, round.
nr
15.00
25
Tube, 36W/40W fluorescent, round.
nr
18.00
26
Tube, fluorescent 4, 36W, two pins (G13), quick start,

minimum 2500 lumen.
nr
15.00
27
Tube, fluorescent 5, 58/80W, two pins (G13), quick start,

minimum 2500 lumen.
nr
32.00
- SR/101 -

No.
UNIT
Item Description
Rate
(RM)
28
Tube, fluorescent, 4, 36W, two pins (G13), quick start,

minimum 3350 lumen.
nr
18.00
29
Tube, fluorescent 5, 58/80W, two pins (G13), quick start,

minimum 3350 lumen.
nr
32.00
30
Tube, 8W emergency fluorescent lamp /8W keluar (exit) lamp.
nr
9.00
31
Bulb, SL,
E27/B22: -
nr
35.00
nr
15.00
9W/13W/18W/25W/40W/60W/100W,
240V/50Hz
Bulbs, PL 240/50Hz: 32
i.
7W
33
ii. 9W
nr
18.00
34
iii. 11W
nr
20.00
Bulbs, PLC 240/50Hz: 35
i.
13W/18W
nr
30.00
36
ii.
26W
nr
38.00
- SR/102 -

No.
Item Description
UNIT
Rate
(RM)
Fluorescent equipments:
Fluorescent equipments with polyster resin ballast low
loss type 6W or lower and c/w tube, starter and power
factor capacitor.
Piped type equipments:
1 x 18W
nr
30.00
2 x 18W
nr
50.00
1 x 36W
nr
40.00
2 x 36W
nr
60.00
Ceiling mounted diffuser type equipment:

5
1 x 18W
nr
55.00
2 x 18W
nr
75.00
1 x 36W
nr
65.00
2 x 36W
nr
85.00
Ram type ceiling mounted:

9
2 x 36W
nr
172.00
10
3 x 36W
nr
197.00
11
2 x 58W
nr
197.00
Metal reflector type or angled metal reflector:

12
1 x 18W
nr
75.00
13
1 x 36W
nr
85.00
14
2 x 36W
nr
105.00
- SR/103 -

No.
UNIT
Item Description
Rate
(RM)
Ceiling mounted square type diffuser:

15
1 x 32W, round tube
nr
180.00
16
1 x 40w, round tube
nr
185.00
17
2 x 18W
nr
225.00
18
3 x 18W
nr
250.00
19
4 x 18W
nr
285.00
Ceiling mounted round diffuser:

20
1 x 22W, round tube
nr
165.00
21
1 x 32W, round tube
nr
180.00
22
1 x 40W, round tube
nr
185.00
23
Flame Proof Fitting

1 x 18W
nr
150.00
24
1 x 36W
nr
180.00
25
Corrosion Resistant Fitting

1 x 18W
nr
150.00
26
2 x 18W
nr
180.00
27
1 x 36W
nr
180.00
28
2 x 36W
nr
220.00
nr
300.00
Ceiling module type with Accessories,

recessed and hanging c/w diffuser:
29
2 x 18W (modul 600mm. x 600mm)
- SR/104 -
surface or

No.
Item Description
UNIT
Rate
(RM)
30
nr
320.00
31
nr
340.00
32
2 x 36W (modul 300mm. x 1200mm)
nr
320.00
33
3 x 36W (modul 300mm. x 1200mm)
nr
340.00
34
2 x 36W (modul 600mm. x 1200mm)
nr
350.00
35
3 x 36W (modul 600mm. x 1200mm)
nr
370.00
36
4 x 36W (modul 600mm. x 1200mm)
nr
390.00
Net wires protection equipments:

37
1 x 18W
nr
85.00
38
1 x 36W
nr
90.00
39
2 x 36W
nr
115.00
Ceiling module type, surface, recess and hanging c/w

ram & full parabolic aluminium reflector:
40
2 x 18W (modul 600mm. X 600mm)
nr
390.00
41
nr
420.00
42
nr
455.00
43
2 x 36W (modul 300mm. X 1200mm)
nr
350.00
44
2 x 36W (modul 600mm. X 1200mm)
nr
420.00
45
3 x 36W (modul 600mm. X 1200mm)
nr
455.00
46
4 x 36W (modul 600mm. X 1200mm)
nr
485.00
- SR/105 -

No.
Item Description
UNIT
Rate
(RM)
Ceiling module type, surface, recessed and hanging

c/w ram & full parabolic aluminium reflector, VDU type,
category 2
47
nr
420.00
48
nr
450.00
49
nr
485.00
50
2 x 36W (modul 300mm. X 1200mm)
nr
380.00
51
2 x 36W (modul 600mm. X 1200mm)
nr
450.00
52
3 x 36W (modul 600mm. X 1200mm)
nr
485.00
53
4 x 36W (modul 600mm. X 1200mm)
nr
515.00
T5 Fluorescent Light Fitting, ceiling module type,

surface or recessed mount c/w parabolic aluminium
louvre
54
1 x 28W (300mm X 1200mm)
nr
570.00
55
2 x 28W (300mm X 1200mm)
nr
705.00
56
2 x 28W (600mm X 1200mm)
nr
775.00
57
3 x 28W (600mm X 1200mm)
nr
975.00
- SR/106 -

No.
Item Description
UNIT
Rate
(RM)
Standard / General equipments
Durable light fitting c/w 60W bulb and white coolicon shade.
nr
40.00
Anti-vandal durable light fitting c/w 60W bulb and wire

netting.
nr
50.00
Durable light fitting c/w 13W/18W PLC bulb.
nr
80.00
150mm diameter acrylic globe c/w 13W PLC bulb.
nr
80.00
nr
100.00
nr
120.00
400mm diameter polycarbonate sphere globe of vandal

resistant c/w 70W SON bulb, choke, capacitor, pole fuse and
other required accessories.
nr
410.00
Spot or flood light lamp fitting c/w PAR 38, 100W/150W spot
or flood beam bulb.
nr
54.00
Spot or flood light lamp fitting c/w PAR 38, 300W spot or flood
beam bulb.
nr
57.00
- SR/107 -

No.
Item Description
UNIT
Rate
(RM)
10
8W fluorescent type emergency lamp with 3 hours capacity

and not less than 6AH battery capacity.
nr
113.00
11
8W fluorescent type emergency lamp with KELUAR sign, 3

hours capacity and not less than 6AH battery capacity.
nr
125.00
12
8W fluorescent type emergency lamp with KELUAR amd

direction sign, 3 hours capacity and not less than 6AH battery
capacity.
nr
132.00
13
Fluorescent type emergency lamp complete with KELUAR

and direction sign on both side.
nr
163.00
14
9W compact energy saving fluorescent lamp (warm / cool

white)
nr
12.00
15

white)
nr
20.00
16

white)
nr
22.00
17

white)
nr
25.00
18

white)
nr
35.00
19

white)
nr
45.00
20
40W/45W compact energy saving fluorescent lamp (warm /

cool white)
nr
110.00
- SR/108 -

No.
UNIT
Item Description
Rate
(RM)
Downlight
(Supply & Install)
1.
100mm dia. Ceiling recessed downlight c/w white/gold rim

and 10W/13W/18W/23W energy saving lamp.
set
115.00
2.
120mm dia. Ceiling recessed extra-low voltage downlight for

dichroic halogen lamp.
set
250.00
3.
125mm dia. Ceiling recessed downlight c/w white/gold rim

and 10W/13W/18W/23W energy saving lamp.
set
115.00
4.
150mm dia. Ceiling recessed downlight

white/gold rim and energy saving lamp.
reflector,
set
115.00
5.
150mm dia. Eyeball ceiling recessed downlight c/w reflector,

white/gold rim and 12V dichroic lamp.
set
235.00
6.
150mm dia. Ceiling recessed downlight c/w reflector,

white/gold rim and 10W/13W/18W PL-C compact lamp &
ballast.
set
115.00
7.
200mm/210mm dia. Ceiling recessed downlight c/w reflector,

white/gold rim and 18W/26W PL-C compact lamp & ballast.
set
185.00
8.
50W 12V Tungsten Halogen Lamp recessed downlight c/w

white/gold rim and 240/12V step down transformer.
set
115.00
c/w
- SR/109 -

No.
Item Description
UNIT
Rate
(RM)
Components and spare-parts equipment:

Prismatic acrylic diffuser for fluorescent equipment:
Size 300mm. x 600mm
nr
18.00
Size 600mm. x 600mm
nr
18.00
Size 300mm. x 1200mm
nr
18.00
nr
26.50
Ram for fluorescent equipments:

5
Size 300mm. x 600mm
nr
26.00
Size 600mm. x 600mm
nr
33.00
nr
33.00
nr
46.00
51cm hanging rod for fluorescent equipment 18W/40W c/w

base cover.
nr
13.00
10
Hanging rod up to 91cm for fluorescent equipment 18W/36W

or 58W.
nr
20.00
11
Holder for fluorescent starter.
nr
3.00
12
Holder for 2 pin fluorescent tube.
13
Starter for fluorescent equipment 18W/20W - 58W.
nr
2.50
14
3.25uF 250 VAC power factor capacitor, fluorescent lamp

18W/20W.
nr
9.00
15
7.5 uF 250 VAC power factor capacitor, fluorescent lamp 2 x

40W / 1 x 80W.
nr
20.00
3.00
- SR/110 -

No.
Item Description
UNIT
Rate
(RM)
16
18W/20W polyester filled ballast type 8W low loss or less.
nr
17.00
17
36W/40W polyester filled ballast type 8W low loss or less.
nr
17.00
18
58W polyester filled ballast, type 12W standard loss or less.
nr
33.00
19
SRS ballast, 36W/40W.
nr
51.50
20
SRS ballast, 58W.
nr
64.00
21
80W mercury vapour (MBF) ballast.
nr
31.00
22
nr
34.00
23
nr
65.50
24
nr
90.50
25
80W/125W, 8 MFD power factor capacitor for mercury vapour

discharged lamp.
nr
26.50
26
250W, 13 MFD power factor capacitor for mercury vapour

(MBF) discharged lamp.
nr
29.00
27
400W, 20 MFD power factor capacitor for mercury vapour

(MBF) discharged lamp.
nr
34.00
28
70W 240V high pressure sodium vapour (SON) ballast.
nr
39.00
29
nr
72.00
30
nr
89.00
31
nr
119.00
- SR/111 -
No.
Item Description
UNIT
Rate
(RM)
32
70W, 150W, 250W, 400W high pressure sodium vapour

ignitor.
nr
64.00
33
70W, 18uF power factor capacitor for high pressure sodium

vapour lamp.
nr
31.50
34

vapour lamp.
nr
31.50
35.

vapour lamp.
nr
45.00
36.

vapour lamp.
nr
54.00
Supply and install:

F
Fan and fans spare parts:
1.
48 diameter ceiling fan c/w regulator, hanger rod, safety wire

and other installation accessories.
nr
180.00
2.
60 diameter ceiling fan c/w regulator, hanger rod, safety wire

and other installation accessories.
nr
200.00
3.
140cm diameter 4 durable plastic blades super deluxe ceiling

fan c/w 5 speed wireless remote control, rod, safety wire and
other installation accessories.
nr
750.00
4.
150cm diameter 5 durable plastic blades super deluxe ceiling

fan c/w 7 speed wireless remote control, rod, safety wire and
nr
900.00
5.
12 diameter wall fan c/w installation accessories.
nr
200.00
- SR/112 -

No.
UNIT
Item Description
Rate
(RM)
6.
16 diameter wall fan c/w installation accessories.
nr
250.00
7.
16 diameter ceiling type oscillating fan c/w regulator.
nr
280.00
8.
25 inches diameter 2 reinforced die-cast aluminium blade

pedestal type free standing with 90 swivel, adjustable height
tube up to 78 inches with cast iron base and 3 speed control
oscillating fan and other installation accessories.
nr
625.00
9.
25 inches diameter 2 reinforced die-cast aluminium blade desk

type free standing with 90 swivel and 3 speed control
oscillating fan and other installation accessories.
nr
525.00
10.
25 inches diameter 2 reinforced die-cast aluminium blade wall

mounted with 90 swivel, adjustable height bend tube with
safety wall mounted kit and 3 speed control oscillating fan and
nr
570.00
Exhaust fan c/w automatic lid/cover:

11.
200mm. (8") g.p.
nr
175.00
12.
250mm. (10") g.p.
nr
200.00
13.
300mm. (12") g.p.
nr
250.00
14.
400mm. (16") g.p.
nr
560.00
15.
Making opening for exhaust fan including framing & plastering
nr
100.00
16.
Power Factor Capacitor for ceiling fan, 1220mm diameter,

2.2uF, and 380Vac.
nr
7.00
17.
Suitable regulator
diameter.
nr
40.00
18.
Fan hook, 150mm.
nr
20.00
19.
26 diameter dehumidifier foggy fan with outdoor misty

cooling system incorporating high pressure pump at 0.03litres
per minute per nozzle with a pressure of 400psi.
nr
4,650.00
for
ceiling
fan,
1220mm
- SR/113 -
1524mm
PART VI OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
No.
Item Description
UNIT
Rate
(RM)
Supply and Install

A
1. Supply and install including digging and patching back for

galvanised octagonal mild steel (hot dipped galvanized)
pole in accordance to BS 11840 and BS 5649 and
galvanized according to BS 729 for the following height: (Planted poles)
a.
Up to 6 metre
nr
1,070.00
b.
More than 6 metre and up to 7 metre
nr
1,140.00
c.
nr
1,290.00
d.
nr
1,395.00
e.
nr
1,510.00
f.
nr
1,625.00
g.
nr
1,740.00
- SR/114 -
No.
Item Description
UNIT
Rate
(RM)
1. Supply and install including digging and patching back for

galvanised octagonal mild steel (hot dipped galvanized)
pole in accordance to BS 11840 and BS 5649 and
galvanized according to BS 729 for the following height: (Flanged mounted)
a.
Up to 6 metre
nr
1,190.00
b.
nr
1,270.00
c.
nr
1,325.00
d.
nr
1,460.00
e.
nr
1,575.00
f.
nr
1,690.00
g.
nr
1,800.00
Supply and install concrete base for flanged mounted

lamp pole.
nr
950.00
4.
Steel type mounting for lantern including complete
accessories.
nr
38.00
5.
Galvanised steel type mounting for lantern including
complete accessories.
nr
48.00
6.
nr
80.00
nr
105.00
3.
Internal wiring for street or compound lighting.
7.
Bakelite Loop-in/Loop-out cable box c/w HRC fuse and
brass plate
- SR/115 -
No.
Item Description
UNIT
Rate
(RM)
B.
Galvanised octagonal mild steel single arm suitable for

lantern, measuring: -
1 metre
nr
140.00
1.5 metre
nr
152.00
2 metre
nr
168.00
2.5 metre
nr
180.00
Galvanised octagonal mild steel double arm suitable for

lantern, measuring: 5
1 metre
nr
280.00
1.5 metre
nr
300.00
2 metre
nr
320.00
2.5 metre
nr
340.00
1 metre
nr
420.00
10
1.5 metre
nr
435.00
11
2 metre
nr
455.00
12
2.5 metre
nr
480.00
Galvanised octagonal mild steel triple arm suitable for lantern,

measuring: 9
- SR/116 -
No.
Item Description
UNIT
Rate
(RM)
Street light lantern c/w choke, starter and accessories and

mercury vapour bulb (MBF), 240V: -
80W
nr
350.00
125W
nr
560.00
250W
nr
650.00
400W
nr
920.00
Street light lantern c/w control equipment and high pressure

sodium vapour bulb (SON), 240V: 5
70W
nr
415.00
100W
nr
520.00
150W
nr
685.00
250W
nr
710.00
400W
nr
875.00
10
Street light lantern, 90W low pressure sodium vapour bulb

(SOX) c/w control equipment
nr
580.00
11
Pole top lantern with opal acryclic bowl c/w control equipment
and mercury vapour bulb (MBF), 240V: -
12
a.
80W
nr
360.00
b.
125W
nr
406.00
nr
530.00
Area flood lighting lantern c/w built-in type control gear and
mercury vapour bulb (MBF): a.
80W
- SR/117 -
No.
Item Description
UNIT
Rate
(RM)
- SR/118 -
13
14
15
b.
125W
nr
606.00
c.
250W
nr
706.00
d.
400W
nr
769.00
Area flood lighting lantern c/w R7S-15 base, tungsten halogen

bulb 240V;
a.
70W E27
nr
682.00
b.
150W E40
nr
765.00
c.
250W E40
nr
858.00
d.
400W E40
nr
899.00
Lantera lampu limpah kawasan l/d tapak R7S-15, mentol

tungsten halogen 240V;
a.
150W
nr
269.00
b.
300W
nr
306.00
c.
500W
nr
331.00
d.
750W
nr
393.00
e.
1000W
nr
434.00
Area flood lighting lantern c/w built-in control equipment and

metal halide bulb (HPI), 240V;
a.
250W
nr
820.00
b.
400W
nr
869.00
c.
1000W
nr
1,300.00
d.
1500W
nr
1,350.00
- SR/119 -
No.
Item Description
UNIT
Rate
(RM)
Supply and install component parts for traffic light

system:
Traffic light aspect measured 210mm diameter using 50W

halogen bulb.
Red.
nr
735.00
ii
Amber.
nr
735.00
iii
Green.
nr
735.00
iv
Red with indication.
nr
785.00
Amber with indication.
nr
785.00
vi
Green with indication.
nr
785.00
Traffic light aspect measured 300mm diameter using 50W

halogen bulb.
i
Red.
nr
953.00
ii
Amber.
nr
953.00
iii
Green.
nr
953.00
iv
nr
1,005.00
nr
1,005.00
vi
nr
1,005.00
nr
1,223.00
Traffic light aspect measured 210mm diameter LED type.

i
Red.
- SR/120 -
No.
Item Description
UNIT
Rate
(RM)
ii
Amber.
nr
1,223.00
iii
Green.
nr
1,392.00
iv
nr
1,122.00
nr
1,410.00
vi
nr
1,410.00
Traffic light aspect measured 300mm diameter LED type.

i
Red.
nr
1,544.00
ii
Amber.
nr
1,544.00
iii
Green.
nr
2,085.00
iv
nr
1,477.00
nr
1,477.00
vi
nr
1,815.00
Traffic light aspect measured 210mm diameter Hi-Flux LED

type.
i
Red.
nr
1,409.00
ii
Amber.
nr
1,443.00
iii
Green.
nr
1,830.00
iv
nr
1,459.00
nr
1,493.00
- SR/121 -
No.
Item Description
UNIT
Rate
(RM)
vi
6
nr
1,729.00
Traffic light aspect measured 300mm diameter Hi-Flux LED

type.
i
Red.
nr
1,713.00
ii
Amber.
nr
1,729.00
iii
Green
nr
2,134.00
iv
nr
1,747.00
nr
1,797.00
vi
nr
2,186.00
Signal light aspect for pedestrian measured 150mm diameter

using halogen bulb 50W.
i
nr
919.00
ii
nr
919.00
nr
937.00
Press button for pedestrian
Loop detector
i
For single lane installation.
lot
787.00
ii
For two lane installation.
lot
973.00
iii
For three lane installation.
lot
1,210.00
iv
For four lane installation.
lot
1,091.00
- SR/122 -
No.
Item Description
UNIT
Rate
(RM)
10
1.5mm2 5 core Underground cable PVC/SWA/PVC.
32.00
11
34.00
12
36.00
13
40.00
14
46.00
15
37.00
16
45.00
17
47.00
18
52.00
19
62.00
- SR/123 -
PART VII LOW VOLTAGE UNDERGROUND CABLE AND ACCESSORIES

No.
Item Description
UNIT
Rate
(RM)
Supply, install, connect soldering/welding of cable end,

drain digging, sand filling, bricks laying / uPVC cable
protective covers, laying a 6mm diameter nylon rope
and to compact according to JKR Standard including
workers pay and material price.
2.5mm2 2 core PVC/SWA/PVC cable.
28.00
4mm2 2 core PVC/SWA/PVC cable.
34.00
37.00
40.00
45.00
60.00
85.00
45.00
54.00
10
65.00
11
76.00
12
92.00
13
107.00
- SR/124 -

No.
Item Description
UNIT
Rate
(RM)
14
25mm2 4 core XLPE/SWA/PVC cable.
92.00
15
107.00
16
146.00
17
207.00
18
269.00
19
336.00
20
426.00
21
524.00
22
679.00
23
849.00
- SR/125 -
No.
Item Description
UNIT
Rate
(RM)
Supply and install PVC/SWA/PVC and XLPE/SWA/PVC on

a cable supporter.
2.5mm2 2 core PVC/SWA/PVC cable.
26.00
31.50
35.00
37.00
43.00
57.00
82.00
43.00
52.00
10
63.00
11
74.00
12
90.00
13
104.00
14
90.00
15
104.00
- SR/126 -

No.
Item Description
UNIT
Rate
(RM)
16
142.00
17
205.00
18
264.00
19
332.00
20
421.00
21
520.00
22
672.00
23
843.00
- SR/127 -
PART VIII MISCELLANEOUS

No.
Item Description
UNIT
Rate
(RM)
Supply and install electrical equipments
3.3kW instant water heater c/w 40A 10mA rccb.
nr
780.00
3.3kW instant water heater c/w 40A 10mA rccb, built-in

booster pump.
nr
980.00
25litres 3kW storage heater tank
750.00
50litres 3kW storage heater tank
950.00
Installation works for GI/uPVC pipe fixing from main pipe to the
instant water heater.
nr
250.00
Installation works for GI pipe fixing from main pipe to& from
the water heater tank.
nr
400.00
128

No.
Item Description
UNIT
Rate
(RM)
PN-10 pipe
Supply and install incoming underground pipe below drainage
base (by pipe-jacking)
100mm diameter "red" HDPE PN-10 pipe
260.00
360.00
Supply and install incoming underground pipe below drainage

base (by manual excavation)
3
180.00
260.00
MATV
Supply and install
UHF / VHF / FM Antennas
set
300.00
1
2
Headend Metal Cabinet consisting of SAT Lightning Protection,

RF Amplifier (UHF, VHF, FM), IF Amplifier (SAT)
set
5,000.00
2 way splitter (5 2050 MHz)
set
75.00
2 way directional coupler
set
75.00
5c2v coaxial cable
15.00
7c2v coaxial cable
20.00
129

No.
Item Description
UNIT
Rate
(RM)
Telephone
Supply and install
Mild steel cable tray c/w brackets as follows:

a. 6"
b. 8"
m
m
25.00
34.00
Mild steel trunking c/w cover as follows:

a. 2" x 2"
b. 2" x 4"
c. 2" x 6"
d. 2" x 8"
m
m
m
m
14.00
22.00
36.00
45.00
m
m
m
m
12.00
22.00
34.00
52.00
a. 10 pairs
b. 20 pairs
c. 30 pairs
d. 50 pairs
set
set
set
set
120.00
265.00
325.00
420.00
MK III/0.63 gray PVC internal cable from DP box to telephone

point c/w flush telephone outlet/socket, termination, etc.
set
180.00
Networking
Supply and install
1.
NI wireless modem / router with 4 ports 10/100 base T

autosensing and auto-uplink RJ45 ports, 1 LAN 10/100 base T
RJ45 WAN adapter
nr
1,500.00
2.
Surge protector for direct plug into socket outlet and has builtin phone line splitter
nr
650.00
3.
16 Ports 10/100 base Switch
nr
1,800.00
4.
24 Ports 10/100 base Switch
nr
2,500.00
0.63mm gray PVC internal telephone cable as follows:

a. 10 pairs
b. 20 pairs
c. 30 pairs
d. 50 pairs
Distribution point box c/w tag block/terminal block (quick

plug-in connector type) jump ring base, plate holder, lockable
door, earthing terminal, etc, as follows:
130

No.
Item Description
UNIT
Rate
(RM)
PUBLIC ADDRESS (PA) SYSTEM

Supply and Install
30W 8 ohms horn speaker c/w driver and 50m 22AWG

Shielded Twisted Pair Cable
set
650.00
50W 8ohms horn speaker c/w 50W driver and 50m 22AWG
Shielded Twisted Pair Cable
set
650.00
400W 8ohms low frequency speaker system c/w 12" woofer

and 50m 22AWG Shielded Twisted Pair cable
set
5,000.00
150W 8ohms wall mounted speaker system c/w 50m 22AWG

Shielded Twisted Pair cable
set
2,800.00
20W 8ohms wall mounted self powered monitor speaker c/w

50m 22AWG Shielded Twisted Pair cable
set
2,200.00
1W ceiling speaker c/w 50m 22AWG Shielded Twisted Pair

cable
set
550.00
Wireless Clip Microphone & receiver (Senneisher)
set
2,800.00
Wireless handheld Microphone & receiver (Senneisher)
set
2,800.00
Handheld Microphone (Senneisher) c/w stand boom arm
set
750.00
10
Paging Microphone c/w 50m 2c screened cable and zone

selector
set
750.00
11
Emergency Panel Siren/Alarm
set
1,000.00
12
FM AM Tuner c/w internal Antenna
set
450.00
13
Cassette Player
set
2,000.00
14
CD Player
set
400.00
15
12 Channel Audio Mixer
set
5,000.00
16
Dual Channel 31 Band Equalizer
set
2,800.00
17
Compressor / Limiter
set
2,000.00
18
Crossover
set
2,000.00
19
24V DC Power Supply Regulator
set
250.00
131

No.
Item Description
UNIT
Rate
(RM)
20
Pre-Amp Mixer
set
3,000.00
21
160W 4 ohms Power Amplifier
set
2,800.00
22
100W 8 ohms Power Amplifier
set
2,400.00
23
200W 8 ohms Dual Channel Power Amplifier
set
3,500.00
24
240W 8 ohms Power Amplifier c/w auto changeover unit
set
4,600.00
25
600W 8 ohms Dual Channel Power Amplifier
set
5,000.00
26
Amplifier Monitoring Panel
set
450.00
27
Zone Selector
set
250.00
28
13 channel Patch Panel with XLR Female Socket
set
1,500.00
29
40m Detachable Patch Cord (using screened insulated copper

cable) c/w XLR connectors at both ends
set
300.00
30
Rack/Cubicle standard 19" Equipment rack c/w ventilation fan
set
2,500.00
STAGE LIGHTING ACCESSORIES

Supply and Install
500W T Class lamp
set
330.00
3 compartment cyclorama aluminium fitting for 300w to

1000w c/w colour filters
set
3,000.00
650W T Class lamp
set
395.00
8" theater fresnel aluminium fitting for 300w - 1000w c/w

colour filters
set
1,400.00
1000W T Class lamp
set
435.00
1000W "Profile" aluminium fitting for 300w to 1000w c/w

colour filters
set
1,400.00
Rack for Stage lighting control panel
set
3,500.00
6 x 2.5kW 3 phase Stage Lighting Dimmer c/w control panel
set
15,000.00
132
No.
Item Description
UNIT
Rate
(RM)
Aluminium truss (pre wired lighting bar 4 metre length with 4

x 15A outlets)
set
2,500.00
10

x 15A outlets)
set
3,500.00
11

x 15A outlets)
set
5,000.00
STAGE CURTAIN
set
25,000.00
set
25,000.00
380.00
1.
2.
Supply and Install

Vertical arising Stage Curtain comprising of the following
components:a. Wall-mounted metalclad Control Panel
b. Up down controller;
c. Remote switch for Stage Curtain at Bilik Kontrol;
d. Stage Curtain motor (1hp 3 phase) c/w all necessary
accessories, coupling, pulley, gearbox, winding drum, steel
wire, wheels, tracks, slider, etc
Horizontal arising Stage Curtain comprising of the following

components:a. Wall-mounted metalclad Control Panel;
b. Forward reverse controller;
c. Remote switch for Stage Curtain at Bilik Kontrol;
d. Stage Curtain motor (1hp 3 phase) c/w all necessary
accessories, coupling, pulley, gearbox, winding drum, steel
wire, wheels, tracks, slider, etc
3.
Fabric for Stage Curtain for vertical or horizontal arising c/w

necessary installation accessories
Material : Fabric
Fabric width : 54 inches (4.5 feet)
Fabric weight : 20 oz per linear yard
Flame retardant : Inherently flame retardant
Fiber content : 100% IFR Poly.
Colour & Pattern : to be decided by the client
133
BAHAGIAN I - PEMASANGANPERPAIPAN DALAMAN DAN AKSOSERI YANG BERKAITAN

No.
Item Description
Approved High Density Polyethylene (HDPE) water tank with lid fixed
complete:-
Unit
Rate (RM)
A.
Size 400 gallons (nominal)
nr
1,064.00
B.
nr
665.00
C.
nr
562.40
D.
nr
380.00
Flanged tank connection and jointed to galvanised mild steel tubing

and mild steel cistern including welding flanged to and perforation in
cistern.
a)
19 mm
nr
19.25
b)
25 mm
nr
22.80
c)
32 mm
nr
38.00
d)
38 mm
nr
43.70
e)
50 mm
nr
55.10
f)
75 mm
nr
90.00
High Pressure equilibrium ball valve as specified with plastic ball and
thread brazed on brass stem and body with flynut and lead washers
and fixing to cisterm including drilling cistern and jointing to cold water
tubing.
a)
19 mm
nr
51.68
b)
25 mm
nr
66.48
High pressure equilibrium ball valve as specified with blown cooper

ball and thread brazed on brass stem and body with flynut and lead
washers and fixing to cistern including drilling cistern and jointing to
cold water tubing.
a)
19 mm
nr
324.00
b)
25 mm
nr
522.00
c)
32 mm
nr
756.00
d)
38 mm
nr
828.00
e)
50mm
nr
900.00
f)
75 mm
nr
3600.00
g)
100 mm
nr
4500.00
Pressure screw down stopcock and jointed to galvanised mild steel

tubing both ends.
a)
13 mm
nr
21.60
b)
19 mm
nr
27.00
c)
25 mm
nr
50.40
d)
32 mm
nr
86.40
e)
38 mm
nr
140.40
f)
50 mm
nr
270.00
134

No.
Item Description
Galvanised mild steel tubing in class "C" as specified including

couplings, connectors, bends, elbows and fees.
Unit
Rate (RM)
a)
13 mm
nr
18.00
b)
19 mm
nr
23.40
c)
25 mm
nr
36.00
d)
32 mm
nr
46.80
e)
38 mm
f)
50 mm
g)
63 mm
h)
75 mm
i)
100 mm
nr
nr
nr
nr
54.00
77.40
99.00
129.60
180.00
Galvanised mild steel tubing in class "B" including all necessary

bends, elbows, tees, fixed complete as specified.
a)
13 mm
nr
15.30
b)
19 mm
nr
19.80
c)
25 mm
nr
30.60
d)
32 mm
nr
39.24
e)
38 mm
nr
45.00
f)
50 mm
nr
63.00
g)
63 mm
nr
81.00
h)
75 mm
nr
105.84
i)
100 mm
nr
154.08
UPVC pipe in class "E" including fixing as specified.

a)
15 mm
b)
20 mm
c)
25 mm
d)
32 mm
e)
38 mm
f)
50 mm

No.
9
Item Description
Unit
Rate (RM)
UPVC pipe in class "D" including fixing as specified.

a)
32 mm
nr
6.84
b)
40 mm
nr
8.28
135
10
c)
50 mm
nr
12.60
d)
75 mm
nr
28.44
e)
100 mm
nr
49.50
UPVC fittings as specified :ELBOW

a)
15 mm
nr
1.53
b)
20 mm
nr
2.61
a)
25 mm
nr
3.87
b)
32 mm
nr
7.20
c)
40 mm
nr
10.80
d)
50 mm
nr
19.80
e)
75 mm
nr
51.84
f)
100 mm
nr
103.68
a)
15 mm
nr
1.53
b)
20 mm
nr
2.61
c)
25 mm
nr
3.87
d)
32 mm
nr
7.20
e)
40 mm
nr
10.80
f)
50 mm
nr
19.80
g)
75 mm
nr
51.84
h)
100 mm
nr
103.68
i)
15 mm
2.25
j)
20 mm
3.24
k)
25 mm
6.30
l)
32 mm
9.90
m) 40 mm
13.32
n)
50 mm
22.68
o)
75 mm
60.48
p)
100 mm
60.48
BEND
TEE
136
No.
Item Description
Unit
Rate (RM)
SOCKET DOUBLE END
11
12
13
a)
15 mm
nr
1.17
b)
20 mm
nr
1.80
c)
25 mm
nr
2.70
d)
32 mm
nr
6.48
e)
40 mm
nr
9.72
f)
50 mm
nr
14.58
g)
75 mm
nr
34.56
h)
100 mm
nr
64.80
ABS pipe in class "D" including fixing as specified :a)
25 mm
10.44
b)
32 mm
c)
40 mm
d)
50 mm
19.26
e)
75 mm
50.22
f)
80 mm
g)
100 mm
122.40
h)
150 mm
ABS pipe in class "E" including fixing as specified :a)
15 mm
5.22
b)
20 mm
c)
25 mm
13.14
d)
32 mm
e)
40 mm
f)
50 mm
40.68
g)
75 mm
60.48
h)
80 mm
i)
100 mm
149.40
j)
150 mm
ABS pipe fittings as specified :90 deg. ELBOW

a)
15 mm
nr
5.43
b)
20 mm
nr
8.39
c) 25 mm
nr
No.
Item Description
137
Unit
12.31
Rate (RM)
No.
a)
32 mm
b)
40 mm
nr
15.47
EQUAL TEE
c) 50 mm
Item Description
Rate 14.44
(RM)
nr
40.15
a)
d)
15 mm
75 mm
nr
nr
7.50
84.00
b)
e)
20 mm
80 mm
nr
nr
11.18
-
c)
f)
25 mm
100 mm
nr
nr
15.38
118.80
d)
g)
32 mm
150 mm
nr
nr
17.33
-
e) 40 mm
45 deg. ELBOW
nr
20.70
f)
a)
50 mm
15 mm
nr
nr
32.70
9.00
g)
b)
75
20 mm
nr
nr
127.50
-
h)
c)
80
25 mm
nr
9.60-
i)
d)
100
mm
32 mm
nr
142.80-
e)
j)
40
150mm
mm
nr
nr
19.35
ENDf)CAP50 mm
g)
a)
75 mm
15
nr
nr
154.10
5.78
b)
h)
20
80 mm
nr
7.73-
c)
i)
25
100mm
mm
nr
9.38
223.10
d)
32 mm
150 mm
nr
12.90-
e) 40 mm
EQUAL SOCKET
nr
16.43
j)
14
nr
Unit
f)
a)
50 mm
15 mm
nr
nr
22.05
7.50
g)
b)
75
20 mm
nr
103.20
11.18
h)
c)
80
25 mm
nr
15.38-
i)
d)
100
mm
32 mm
nr
194.40
17.33
j)
e)
25
40 mm
mm
nr
nr
20.70-
nr
32.70
HDPE
grade PN 10 including fixing as specified:f) pipe
50 mm
a)
g)
20 mm
75 mm
nr
nr
7.80
127.50
b)
h)
25 mm
80 mm
nr
nr
8.37
-
c)
i)
32 mm
100 mm
nr
nr
12.42
142.80
d)
j)
nr
nr
10.65
-
e)
38 mm
150 mm
50 mm
nr
30.24
f)
75 mm
nr
59.40
138

No.
15
16
Item Description
Unit
Rate (RM)
HDPE pipe grade PN 12.5 including fixing as specified:a)
20 mm
nr
b)
25 mm
nr
8.55
c)
32 mm
nr
10.13
d)
38 mm
nr
12.15
e)
50 mm
nr
15.68
f)
75 mm
nr
HDPE pipe fitting as specified:90 deg. ELBOW

a)
20 mm
nr
9.38
b)
25 mm
nr
14.04
c)
32 mm
nr
35.10
d)
38 mm
nr
e)
50 mm
nr
58.32
f)
75 mm
nr
154.80
EQUAL TEE
a)
20 mm
nr
13.20
b)
25 mm
nr
20.34
c)
32 mm
nr
50.40
d)
38 mm
nr
e)
50 mm
nr
88.20
f)
75 mm
nr
232.20
STRAIGHT COUPLER
a)
20 mm
nr
11.18
b)
25 mm
nr
12.60
c)
32 mm
nr
28.80
d)
38 mm
nr
e)
50 mm
nr
51.30
f)
75 mm
nr
126.00
139

No.
Item Description
Unit
Rate (RM)
MALE THREADED ADAPTOR (MTA)

a)
20 mm
nr
8.03
b)
25 mm
nr
10.05
c)
32 mm
nr
17.47
d)
38 mm
nr
e)
50 mm
nr
27.90
f)
75 mm
nr
87.48
FEMALE THREADED ADAPTOR (FTA)

a)
20 mm
nr
8.55
b)
25 mm
nr
10.65
c)
32 mm
nr
19.44
d)
38 mm
nr
e)
50 mm
nr
46.62
f)
75 mm
nr
REDUCER COUPLING
a)
20 mm
nr
b)
25 mm
nr
13.20
c)
32 mm
nr
21.42
d)
38 mm
nr
e)
50 mm
nr
44.82
f)
75 mm
nr
126.00
BAHAGIAN II - PEMASANGAN PENDINGIN UDARA JENIS PISAH DAN AKSOSERI YANG BERKAITAN
140
No.
Item Description
Complete Installation Air Cooled Split Unit including one (1) meter
refrigerant piping, wiring works, casing, bracket, clips, vibration pad
and all others necessary required.
Unit
Rate (RM)
Wall Mounted
a)
9,000 btu/hr
nr
1,903.00
b)
13,000 btu/hr
nr
2,008.00
c)
18,000 btu/hr
nr
2,882.00
d)
24,000 btu/hr
nr
3,416.00
e)
28,000 btu/hr
nr
4,351.00
Ceiling mounted
a)
10,000 btu/hr
nr
2,442.00
b)
13,000 btu/hr
nr
2,739.00
c)
25,000 btu/hr
nr
3,399.00
d)
35,000 btu/hr
nr
3,911.00
e)
40,000 btu/hr
nr
4,494.00
f)
50,000 btu/hr
nr
6,244.00
Ceiling Cassete
a)
10,000 btu/hr
nr
3,014.00
b)
13,000 btu/hr
nr
3,344.00
c)
18,000 btu/hr
nr
4,158.00
d)
25,000 btu/hr
nr
4,626.00
e)
28,000 btu/hr
nr
5,187.00
f)
35,000 btu/hr
nr
6,838.00
g)
40,000 btu/hr
nr
7,036.00
h)
50,000 btu/hr
nr
7,651.00
Installation Copper Refrigerant Piping including insulation, metal

trunking and fixing as specified.
a)
9,000 btu/hr - 10,000 btu/hr

Suction: 3/8
Discharge:1/4
71.00
b)
13,000 btu/hr - 18,000 btu/hr

Suction : 1/2"
Discharge : 1/4"
80.00
c)
24,000 btu/hr - 30,000 btu/hr

Suction : 5/8"
Discharge : 3/8"
97.00
d)
35,000 btu/hr - 50,000 btu/hr

Suction : 3/4"
Discharge : 3/8"
138.00
BAHAGIAN II - PEMASANGAN PENDINGIN UDARA JENIS PISAH DAN AKSOSERI YANG BERKAITAN
141
No.
Item Description
e)
61,000 btu/hr
Suction : 3/4"
Discharge : 1/2"
Unit
m
142
Rate (RM)
147.00
DAYWORK RATES (CONTD)

No.
Description
Unit
Rate (RM)
Percentage
Increase/Decrease
DAYWORK LABOUR RATES

1.
General Labour
DAY
49.50
2.
Concrete Leveller/Screeder
DAY
71.50
3.
Drainlayer
DAY
71.50
4.
Mason
DAY
71.50
5.
Bricklayer
DAY
71.50
6.
Carpenter and Joiner
DAY
71.50
7.
Steel Bar Bender and Fixer
DAY
71.50
8.
Pneumatic Tool Operator
DAY
71.50
9.
Fitter
DAY
77.00
10.
Welder
DAY
77.00
11.
Plumber
DAY
77.00
12.
Painter
DAY
66.00
13.
Roofer
DAY
71.50
14.
Glazier
DAY
71.50
15.
Ironworker
DAY
77.00
16.
Pavior/Plasterer
DAY
71.50
17.
Tile Fixer
DAY
77.00
The foregoing Schedule of Rates and percentage increase or decrease for Daywork
Labour Rates as set down by the successful tenderer on Pages SR/147 inclusive have
been scrutinized and agreed to by me as reasonable.
.....................................................
(Superintending Officer)
143
Date : ..................................................
CONTRACT NO. ................................................................ of the year ........................
entered into the ................... day of ............................................................................. by
the undersigned parties to this Schedule of Rates consisting of ....................... pages,
number 1 to ................. inclusive which shall be read and construed as part of the said
Contract.
..........................................
(Contractor)
..........................................
............................................
(Witness)
............................................
(Witness)
Date : .................................
Date : .................................
144

Schedule of Rates 2011 (Rev1)

Uploaded by

Copyright:

Available Formats

Schedule of Rates 2011 (Rev1)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Schedule of Rates 2011 (Rev1)

Uploaded by

Copyright:

Available Formats

Negeri Sabah

Jabatan Kerja Raya

Jadual Kadar Harga Bagi

Pengarah Kerja Raya

Ibu Pejabat JKR

Carpenter and Joiner

Steel and Ironworker

Pavior, Plasterer and Tile Fixer

Road, Culvert, Fencing, Turfing and

Negeri Sabah, Malaysia

PRESSURE TREATED TIMBER PILES

Supply only 125mm x 125mm pressure treated initial and extension

Ditto 150mm x 150mm ditto.

Handle, transport, pitch and drive 125mm x 125mm timber piles.

Ditto 150mm x 150mm ditto.

Pointing and shaping end of 125mm x 125mm timber piles

Ditto 150mm x 150mm timber piles ditto 150mm x 150mm x

Ditto 140mm x 140mm (internal dimensions) x 450 mm long, ditto.

Ditto 150mm x 150mm, ditto.

Provide all equipment, hydraulic jack, deflection gauges, kentledge,

Ditto and test a successive test pile ditto.

Dito size 150mm x 150mm to a vertical load test of ... KN including

Ditto and test a successive test pile ditto.

PRECAST CONCRETE PILES

Supply only 150mm x 150mm initial/head pile 6.00m long.

Supply only 150mm x 150mm extension pile 6.00m long.

Supply only 200mm x 200mm initial/head pile 6.00m long.

PRECAST CONCRETE PILES (CONTD)

Supply only 200mm x 200mm extension pile 6.00m long.

Supply only 250mm x 250mm initial/head pile 6.00m long.

Ditto 9.00m long

Ditto 12.00m long

Supply only 250mm x 250mm extension pile 6.00m long.

Ditto 9.00m long.

Ditto 12.00m long

Supply only 300mm x 300mm initial/head pile 6.00m long.

Ditto 9.00m long.

Ditto 12.00m long

Supply only 300mm x 300mm extension pile 6.00m long.

Ditto 9.00m long.

Ditto 12.00m long

Supply only 350mm x 350mm initial/head pile 6.00m long.

Ditto 9.00m long.

Ditto 12.00m long

Supply only 350mm x 350mm extension pile 6.00m long.

Ditto 9.00m long.

Ditto 12.00m long

Supply only 400mm x 400mm initial/head pile 6.00m long.

Ditto 9.00m long.

Ditto 12.00m long

Supply only 400mm x 400mm extension pile 6.00m long.

Supply only 400mm x 400mm extension pile 9.00m long.

Ditto 12.00m long

Handle, transport, pitch and drive 150mm x 150mm pile.

Ditto 200mm x 200mm pile.

Ditto 250mm x 250mm pile.

Ditto 300mm x 300mm pile.

PRECAST CONCRETE PILES (CONTD)

Ditto 350mm x 350mm pile.