Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

DBKL Maintenance Rate

Download as pdf or txt
Download as pdf or txt
You are on page 1of 47

JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


GA0100 CUTTING DOWN TREES TO GROUND LEVEL ONLY
GA0101 Cut down trees of girth not exceeding 600mm measured No. 345.00
600mm above ground level. Cut down tree to ground
level without grubbing up roots, remove all branches
trunks, etc from site to a tip be provided by the
contractor.

GA0102 - do - if girth exceeding 600mm and not exceeding No. 517.50


900mm measured 600mm above ground level.

GA0103 - do - if girth exceeding 900mm and not exceeding No. 632.50


1200mm measured 600mm above ground level.

GA0104 - do - if girth exceeding 1200mm and not exceeding No. 747.50


1500mm measured 600mm above ground level.

GA0105 - do - if girth exceeding 1500mm and not exceeding No. 862.50


1800mm measured 600mm above ground level.

GA0106 - do - if girth exceeding 1800mm and not exceeding No. 977.50


2100mm measured 600mm above ground level.

GA0107 - do - if girth exceeding 2100mm and not exceeding No. 1,092.50


2400mm measured 600mm above ground level.

GA0108 - do - if girth exceeding 2400mm and not exceeding No. 1,207.50


2700mm measured 600mm above ground level.

GA0200 GRUBBING UP TREE STUMPS & ROOTS

GA0201 Supply all labours, equipment, material, excavate and No. 690.00
grub up tree-stump not exceeding 600mm girth and all
its roots to depth not exceeding 3.0m backfill excavation
and remove all trunk, stumps and roots from site to a tip
to be provided by the contractor.

GA0202 do but tree-stump of girth exceeding 600mm and all its No. 862.50
but not exceeding 1200mm measured 1000mm from
the ground level.

GA0203 do but tree-stump of girth exceeding 900mm but not No. 1,035.00
exceeding 1200mm.

GA0204 do but tree-stump of girth exceeding 1200mm but not No. 1,150.00
exceeding 1500mm.
GA0205 do but tree-stump of girth exceeding 1500mm but not No. 1,495.00
exceeding 1800mm
GA0206 do but tree-stump of girth exceeding 1800mm but not No. 1,955.00
exceeding 2100mm

97
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


GB0100 SITE CLEARING

GB0101 Clear the whole area of the construction site of grass, m 12.40
lallang, belukar, shrubs and all debris and construction
materials, structural or else where is directed by S.O.
GB0102 Extra over for clearing site of tree by heavy machineries No. 34.50
including carting away and grubbing of roots.

GC0100 DEMOLITION OF CONCRETE BRICKWORK, BLOCK


DRAIN, PUDU CUT DRAIN, CONCRETE FLOOR,
FOOTPATH AND PITCHING

GC0101 Excavate using hydraulic excavator to and break up m 37.95


existing concrete floor block drains, rubble wall and
brickwall in headwalls wingwalls, slabs and foundations
of manholes and culverts and drains and including
drains of all types, pipes and surrounds and get out and
dispose of rubble at site to be provided by Contractor or
as directed by S.O.

GC0102 Supply generator set and air compressor to site to break m 44.30
up existing concrete block drain, pudu cut drain, rubble
wall and brick wall in headwall, wingwall, slabs,
manholes, culverts, drains, rock, etc and dispose of
rubble at site to be provided by contractor or as directed
by S.O

GC0103 Do but for concrete with steel reinforcement bars m 56.90

HA0100 EARTHWORKS

HA0101 Excavate in all materials other than solid rock to the


required lines and profiles as shown on the Drawings or
as directed by the S.O and

a) transport and deposit in compacted layers to form m 5.30


embankments or to other fill areas all in accordance with
the Specifications or as directed by the S.O

b) run to spoil, dump to be provided by the Contractor, m 6.90


all in accordance to the Specification.

HA0102 Extra over item 2-2-1 for excavation rock. m 57.50

HA0103 Excavate in unsuitable material existing earth drains and m 9.30


other water courses, etc, below level, dispose to spoil
tips off-site at a location to be provided by the
Contractor and backfill with suitable material in
compacted layers all in accordance with the
Specifications or as directed by the S.O.

98
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


SAND FOR CONCRETING
HB0100
Supply and transport to Dewan Bandaraya Store or to
258.00
HB0101 any site in the Wilayah Persekutuan Kuala Lumpur,
Per.Lorry
clean sand for the use in concreting works. Capacity of
lorry to be between 4.0 and 5.0 cu.m
HB0102 Supply and transport to Dewan Bandaraya Store or to Per.Lorry 288.40
any site in the Wilayah Persekutuan Kuala Lumpur,
clean sand for the use in rendering. Capasity of lorry to
be between 4.0 and 5.0 cu.m
IA0100 EXCAVATION FOR DRAIN LAYING
IA0101 Excavate to drain for drain laying to depth not exceeding m 9.90
1.5 m in pre-approved length to minimise inconvenience
to pedestrian and vehicular traffic, get out and remove
to a tip to be provided by the contractor away from work
site not exceeding 4.5 KM radius, including where
directed cutting site slopes to angles as specified. On
completion of drain laying return selected spoil and ram
sides of drains. Include all necesarry timbering.

IA0102 Do but to depth exceeding 1.5 m but not exceeding 3.0 m 12.00
m -do- (Volume of excavation to be calculated from
ground level to the actual depth)
IA0103 Do but to depth exceeding 3.0 m but not exceeding 4.5 m 14.60
m -do- (Volume of excavation to be calculated from
ground level to the actual depth)

IB0100 EXCAVATION FOR DRAIN PIPE AND BOX CULVERT

IB0101 Excavate to concrete pipe to depth not exceeding 1.5m m 9.89


in pre-approved lengths to minimise inconvenience to
pedestrian and vehicular traffic and get out and remove
to a tip to be provided by the contractor away from work
site not exceeding 4.5 km radius. On completion of pipe
laying, return selected spoil and ram. Include all
necessary timbering.
IB0102 Do but to depth exceeding 1.5 m but not exceeding 3.0 m 12.00
m -do- (Volume of excavation to be calculated from
ground level to the actual depth)
IB0103 Do but to depth exceeding 3.0 m but not exceeding 4.5 m 14.60
m -do- (Volume of excavation to be calculated from
ground level to the actual depth)
IC0100 EXCAVATION FOR MANHOLES, SUMPS AND PIERS

IC0101 Excavate to foundation of manhole, sumps, pipe etc. not m 9.90


exceeding 1.5m deep get out and remove to a tip to be
provided by the contractor away from work site not
exceeding 4.5 km radius. On completion, return
selected spoil and ram, include for any timbering
required.

99
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


IC0102 Do but to depth exceeding 1.5 m but not exceeding 3.0 m 12.00
m -do- (Volume of excavation to be calculated from
ground level to the actual depth)

IC0103 Do but to depth exceeding 3.0 m but not exceeding 4.5 m 14.60
m -do- (Volume of excavation to be calculated from
ground level to the actual depth)
ID0100 HAND EXCAVATION

ID0101 Supply all necessary labour and tools for hand m 20.70
excavation, get out and remove to a tip provided by the
Contractor. On completion, return selected spoil and
ram.

CONCRETOR
JA0100 CONCRETE TO DRAINS
JA0101 Provide and lay concrete (1:3:6-38 aggregate) in base m 271.40
and haunching to block drain. "Pudu Cut" drain and
H.R.G.W channels all as per details in Drawings.
Include for all mixing and placing as required.
JA0102 Provide and lay (1:2:4-19 aggregate) in concrete m 278.30
revetment to side of H.R.G.W. drains all as per details in
Drawings.Include for all mixing and placing(casing
including struts etc. and float rendering measured
separately).
JB0100 CONCRETE IN PIPE CULVERT
JB0101 Provide and lay concrete (1:3:6-38 aggregate) in base m 271.40
and surround to pipe culvert all as per details in
Drawings. Include for all mixing and placing as required.

JC0100 CONCRETE IN REINFORCES STRUCTURES


INCLUDING MANHOLES, WALLS, FOUNDATIONS,
ETC
JC0101 Provide and lay concrete (1:4:8 - 38 mm agg) in rough m 241.50
fill or mud seal etc. as directed
JC 0102 Provide and lay concrete (1:3:6 - 38 mm agg) in m 271.40
foundation and benching to manholes or as directed
JC0103 Provide and lay concrete (1:2:4 - 20 mm agg) concrete m 278.30
in reinforced concrete structure including foundation and
walls. Include for all mixing, placing, vibrating and
consolidating as required. Reinforcement and casing
measured separately.
JC0104 Do but in reinforced concrete slabs and beams in m 278.30
manholes and chamber and do
KA0100 READY MIX CONCRETE
KA0101 Purchace and lay Ready-Mix Concrete Grade 20 Mpa to m 336.00
any site as directed by the S.O. Include for all mixing,
placing and consolidating as required.

100
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


KA0102 Do but Ready Mix Concrete Grade 25 Mpa m 356.50
KA0103 Do but Ready Mix Concrete Grade 30 Mpa m 368.00

LA0100 GLAZED WARE HALF-ROUND CHANNEL


LA0101 Purchase best commercial quality straight 150mm m 15.20
G.W.H.R channel in 600 mm or 900 mm lengths from
approved manufacturer, transport to site and lay as
directed on prepared concrete bed (measured
separately). Include for jointing in cement mortar 1:3
and all cutting and waste.
LA0102 Do but straight 225 mm dia G.W.H.R channel and -do- m 17.90
LA0103 Do but straight 225 mm dia G.W.H.R channel and -do- m 27.60
LA0104 Do but straight 381 mm dia G.W.H.R channel and -do- m 34.50

MA0100 PRECAST CONCRETE SLAB


MA0101 Provide and lay in position precast concrete over slabs No. 40.00
610 x 533 x 89 mm thick, reinforced with 6 Nos. 10 mm
dia.bars and 5 nos.6mm dia.distribution bars all as per
details in Drawings.
MA0102 Provide and lay in position precast concrete over slabs No. 48.00
610 x 610 x 100mm thick, reinforced with 6 Nos. 10 mm
dia.bars and 5 nos.6mm dia.distribution bars all as per
details in Drawings.
MA0103 Provide and lay in position precast concrete over slabs No. 52.00
711 x 610 x 100mm thick, reinforced with 6 Nos. 12 mm
dia.bars and 5 nos.6mm dia.distribution bars all as per
details in Drawings.
MA0104 Provide and lay in position precast concrete over slabs No. 54.00
838 x 610 x 100mm thick, reinforced with 6 Nos. 12 mm
dia.bars and 6 nos.6mm dia.distribution bars all as per
details in Drawings.
MA0105 Provide and lay in position precast concrete over slabs No. 58.00
838 x 610 x 100mm thick, reinforced with 6 Nos. 16mm
dia.bars and 6 nos.6mm dia.distribution bars all as per
details in Drawings.
MA0106 Provide and lay in position precast concrete over slabs No. 40.00
915 x 305 x 100mm thick, reinforced with 3 Nos. 12mm
dia.bars and 6 nos.6mm dia.distribution bars all as per
details in Drawings.
MA0107 Provide and lay in position precast concrete over slabs No. 43.00
1067 x 305 x 127mm thick, reinforced with 3 Nos.
12mm dia.bars and 6 nos.6mm dia.distribution bars all
as per details in Drawings.
MA0108 Provide and lay in position precast concrete over slabs No. 48.00
1067 x 305 x 127mm thick, reinforced with 3 Nos.
16mm dia.bars and 6 nos.6mm dia.distribution bars all
as per details in Drawings.

101
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


MB0100 PRECAST CONCRETE SLAB FOR MANHOLES

MB0101 Provide and lay in position precast concrete cover slabs No. 70.00
1443 x 305 x 100mm thick, reinforced with 3 Nos.
12mm dia.bars and 8 nos.6mm dia.distribution bars all
as per details in Drawings.

NA0100 BRICKLAYER AND MASON

NA0101 Supply and lay well burn clay brickwork in cement m 79.35
mortar 1:3 in walls and shafts of inspection chambers
and manholes, piers to suspended pipe lines, columns,
walls to any depth or height not exceeding 3 m
measurement not excluding openings. Include for flush
pointing of joints (reduced to 225mm thickness for
measurement)

NA0102 Supply approved wire cut clay bricks and construct m 79.35
225mm thick brickwork walls in English bond over
concrete foundations at sides of inverts (measured
separately). Include for laying and jointing in cement
mortar (1:3) and for rendering all exposed surfaces with
cement mortar 12 mm thick (1:3) where applicable
include for forming a recess 115x89/100/125 mm deep
to receive slabs.

NA0103 Do but for 338 mm thick brickworks walls and -do- m 113.70

NB0100 RENDERING

NB0101 Rendering to concrete or brick surfaces with portland m 17.25


cement mortar 20 mm mixture 1:3 finished with steel
float and include for any necessary screed backing and
preparatory.
NB0102 Do but using high alumina cement. m 20.70

OA0100 RUBBLE WALL AND RUBBLE PITCHING

OA0101 Supply all necessary materials and labour and construct m 253.00
mass limestone rubble wall inclusive to sides of drain.
The spalls to be 150mm to 225mm sizes. Include for
packing interstices with 1:3:6-40 mm concrete and
jointing and flush pointing faces with cement mortar 1:3.

OA0102 Supply all necessary materials and labour and construct m 109.25
rubble pitching to average thickness of 225 mm laid on
graded side slopes of drain. The average face size
blocks should be not less than 225mm by 150 mm.
Include for jointing and filling interstices with 1:3:6-19
mm concrete.

102
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


OA0103 Supply and build into limestone rubble wall or pitching No. 4.00
75 mm dia.eartenware pipes 300mm long to form weep
holes.

OA0104 Supply and build into limestone rubble wall or pitching m 29.10
75 mm dia.galvanised iron pipe (Class A) to form weep
holes.

OA0105 Supply and lay 75 mm to 125mm crushed metal as m 52.90


packing behind retaining walls to form weep holes.
Include for packing interstices with 1:3:6-40mm
concrete and jointing and flush pointing faces with
cement mortar 1:3

OA0106 Do but 150 mm to 225mm crushed metal and -do- m 72.80

OA0107 Supply,designed and installed concrete segmental m 227.70


retaining wall all as specified by the Architect
Landscape. Works shall also include design, inspection
and certification by a registered Professional Engineer.

OA0108 Membekal semua keperluan dan tenaga pekerja untuk m 379.50


kerja-kerja memasang "Konkrit Segmental Bagi
Retaining Wall ".

OA0109 Membekal semua keperluan dan tenaga pekerja untuk m 368.00


kerja-kerja memasang "Konkrit Modular Interlock
Retaining Wall".

OA0110 Membekal,menghantar semua keperluan dan tenaga No. 230.00


pekerja untuk kerja-kerja memasang "Gabion Wall"
bersaiz sangkar 1mx1mx1m (dawai G16 mesh 8x10m)

OA0111 Membekal,menghantar semua keperluan dan tenaga No. 333.50


pekerja untuk kerja-kerja memasang "Gabion Wall"
bersaiz sangkar 2mx1mx1m (dawai G16 mesh 8x10m)

OA0112 Membekal,menghantar semua keperluan dan tenaga No. 448.50


pekerja untuk kerja-kerja memasang "Gabion Wall"
bersaiz sangkar 3mx1mx1m (dawai G16 mesh 8x10m)

PA0100 STEEL AND IRONMONGERY


PA0101 REINFORCEMENT
PA0102 Supply and lay BRC fabric No.A10 or equivalent, include m 19.30
for fixing, bending if necessary and for overlapping
sheets 300 mm along cross wires at joints and all
cutting and waste.

PA0103 Do but B.R.C. Fabric A9 m 16.60


PA0104 Do but B.R.C. Fabric A8 m 15.20

PA0105 Do but B.R.C. Fabric B10 m 24.80

103
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


PB0100 STEEL GRATING

PB0101 Supply and fix in position steel grating 610mmx457mm No. 151.80
including frame to required level and position and all as
per detail in the Drawings.

PB0102 Do but for 610mmx610mm steel grating No. 204.20

PB0103 Do but for 711mmx610mm steel grating No. 238.70

PB0104 Do but for 838mmx610mm steel grating No. 276.00

PB0105 Do but for 915mmx610mm steel grating No. 331.20

PB0106 Do but for 1067mmx610mm steel grating No. 386.40

PB0107 Do but for 1219mmx610mm steel grating No. 441.60

PB0108 Do but for 1371mmx610mm steel grating No. 489.90

PB0109 Do but for 1523mmx610mm steel grating No. 545.10

PB0110 Do but for 1675mmx610mm steel grating No. 593.40

PB0111 Do but for 1827mmx610mm steel grating No. 641.70

PB0112 Supply and fix in position Hot Zinc Galvanised Iron No. 204.20
grating 610mmx457mm including frame and hinge (to
hook grating) to required level and position and all as
per detail in the Drawings.

PB0113 Do but for 610mmx610mm Hot Zinc Galvanised Iron No. 269.10
grating -do-.

PB0114 Do but for 711mmx610mm -do- No. 317.40

PB0115 Do but for 838mmx610mm -do- No. 372.60

PB0116 Do but for 915mmx610mm -do- No. 408.25

PB0117 Do but for 1067mmx610mm -do- No. 476.10

PB0118 Supply and fix in position Hot dip Galvanized Iron No. 345.00
Grating 610mmx457mm (using 75mmx75mmx6mm
Angle Frame) to required level and position and all as
per detail in the drawing).

PB0119 Do but for Grating size 610mmx610mm -do- No. 455.40

PB0120 Do but for Grating size 711mmx610mm -do- No. 552.20

PB0121 Do but for Grating size 838mmx610mm -do- No. 634.80

PB0122 Supply and fix in position Hot dip Galvanized Iron No. 151.80
Grating 610mmx457mm (using 30mmx30mmx5mm
Angle Frame) to required level and position and all as
per detail in the drawing).
PB0123 Do but for Grating size 610mmx610mm -do- No. 200.10

104
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


PB0124 Do but for Grating size 711mmx610mm -do- No. 227.00

PB0125 Do but for Grating size 838mmx610mm -do- No 255.00

PC0100 PRECAST COMPRESSED CONCRETE SLAB


PC0101 Supply and install 290mmx590mm PC Reinforced No. 90.00
concrete drain cover slab, Grade 35 compressed slab
50 mm thick to required level and position.
PC0102 Supply and install 450mmx600mm PC Reinforced No. 105.00
concrete drain cover slab, Grade 35 compressed slab
75 mm thick to required level and position.
PC0103 Supply and install 600mmx600mm PC Reinforced No. 190.00
concrete drain cover slab, Grade 35 compressed slab
50 mm thick to required level and position.
PC0104 Supply and install 800mmx800mm PC Reinforced No. 220.00
concrete drain cover slab, Grade 35 compressed slab
50 mm thick to required level and position.
PC0105 Supply and install 1200mmx1200mm PC Reinforced No. 700.00
concrete drain cover slab, Grade 35 compressed slab
75 mm thick to required level and position.
PC0106 Supply and install, galvanised mild steel base frame No. 144.00
overall size 610mmx405mmx5mm thick with angle plate
50x50x5mm thick.

PC0200 LABOUR COST FOR REMOVING & RE-LAYING


EXISTING SLAB
PC0201 Provide all necessary tools, machineries and labour to m 10.40
take out existing slab and after remedial works
(measured separately) re-lay the existing slabs.

105
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


PD0000 FRP MINIMESH(FRP)

PD0101 FRP PENUTUP LONGKANG

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
berukuran
PD0101 300mm x 300mm x 38mm tebal No 131.00
PD0102 - Ditto; 50mm tebal No 186.00
PD0103 - Ditto; 1000mm tebal No 318.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
berukuran
PD0104 300mm x 600mm x 38mm tebal No 230.00
PD0105 - Ditto; 50mm tebal No 330.00
PD0106 - Ditto; 1000mm tebal No 586.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
berukuran
PD0107 375mm x 600mm x 38mm tebal No 281.00
PD0108 - Ditto; 50mm tebal No 402.00
PD0109 - Ditto; 1000mm tebal No 720.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
berukuran
PD0110 300mm x 1200mm x 38mm tebal No 430.00
PD0111 - Ditto; 50mm tebal No 618.00
PD0112 - Ditto; 1000mm tebal No 1,121.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
berukuran
600mm x 600mm x 38mm tebal No 430.00
- Ditto; 50mm tebal No 618.00
- Ditto; 1000mm tebal No 1,121.00

106
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


Membekal dan Memasang FRP Minimesh Grating
Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
berukuran
PD0113 610mm x 475mm x 38mm tebal No 351.00
PD0114 - Ditto; 50mm tebal No 506.00
PD0115 - Ditto; 1000mm tebal No 911.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
PD0116 Frame, ISO Grey atau setara dengannya (Equivalent)
berukuran 610mm x 610mm x 38mm tebal No 443.00

PD0117 - Ditto; 50mm tebal No 638.00


PD0118 - Ditto; 1000mm tebal No 1,156.00

Membekal dan Memasang FRP Minimesh Grating


PD0119 Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
No 512.00
berukuran 711mm x 610mm x 38mm tebal

PD0120 - Ditto; 50mm tebal No 735.00


PD0121 - Ditto; 1000mm tebal No 1,340.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
PD0121
Frame, ISO Grey atau setara dengannya (Equivalent)
No 598.00
berukuran 838mm x 610mm x 38mm tebal
PD0122 - Ditto; 50mm tebal No 861.00
PD0123 - Ditto; 1000mm tebal No 1,570.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)

PD0124 berukuran 900mm x 900mm x 38mm tebal No 928.00


PD0125 - Ditto; 50mm tebal No 1,339.00
PD0126 - Ditto; 1000mm tebal No 2,458.00

PD0127 Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent) No 649.00
berukuran 915mm x 610mm x 38mm tebal

107
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


PD0128 - Ditto; 50mm tebal No 935.00
PD0129 - Ditto; 1000mm tebal No 1,708.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
PD0130
Frame, ISO Grey atau setara dengannya (Equivalent)
No 751.00
berukuran 1067mm x 610mm x 38mm tebal
PD0131 - Ditto; 50mm tebal No 1,084.00
PD0132 - Ditto; 1000mm tebal No 1,984.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
PD0133 Frame, ISO Grey atau setara dengannya (Equivalent)
berukuran 1219mm x 610mm x 38mm tebal No 855.00

PD0134 - Ditto; 50mm tebal No 1,232.00


PD0135 - Ditto; 1000mm tebal No 2,260.00

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
PD0136
berukuran 1371mm x 610mm x 38mm tebal No 957.00
PD0137 - Ditto; 50mm tebal No 1,381.00
PD0138 - Ditto; 1000mm tebal No 2,535.00

Membekal dan Memasang FRP Minimesh Grating


PD0139 Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent) No 1,060.00
berukuran 1523mm x 610mm x 38mm tebal

PD0140 - Ditto; 50mm tebal No 1,530.00


PD0141 - Ditto; 1000mm tebal No 2,811.00

Membekal dan Memasang FRP Minimesh Grating


PD0142
Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent) No 1,162.00
berukuran 1675mm x 610mm x 38mm tebal
PD0143 - Ditto; 50mm tebal No 1,678.00
PD0144 - Ditto; 1000mm tebal No 3,086.00

108
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)

Membekal dan Memasang FRP Minimesh Grating


Penutup Longkang (FRP Drain Cover) termasuk FRP
Frame, ISO Grey atau setara dengannya (Equivalent)
PD0145 berukuran 1827mm x 610mm x 38mm tebal No 1,265.00
PD0146 - Ditto; 50mm tebal No 1,826.00
PD0147 - Ditto; 1000mm tebal No 3,362.00

PD0200 FRP MAINHOLE


Membekal dan Memasang FRP Minimesh Grating
Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0201 setara dengannya (Equivalent) berukuran 300mm x
No 154.00
300mm x 38mm tebal
PD0202 - Ditto; 50mm tebal No 209.00
PD0203 - Ditto; 100mm tebal No 342.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole(FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0204 setara dengannya (Equivalent) berukuran 300mm x
No 277.00
600mm x 38mm tebal
PD0205 - Ditto; 50mm tebal No 376.00
PD0206 - Ditto; 100mm tebal No 633.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0207 setara dengannya (Equivalent) berukuran 375mm x
No 338.00
600mm x 38mm tebal
PD0208 - Ditto; 50mm tebal No 459.00
PD0209 - Ditto; 100mm tebal No 777.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0210 setara dengannya (Equivalent) berukuran 300mm x
No 521.00
1200mm x 38mm tebal
PD0211 - Ditto; 50mm tebal No 710.00
PD0212 - Ditto; 100mm tebal No 1,212.00

109
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)

Membekal dan Memasang FRP Minimesh Grating


Mainhole(FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0213 setara dengannya (Equivalent) berukuran 600mm x
No 521.00
600mm x 38mm tebal
PD0214 - Ditto; 50mm tebal No 710.00
PD0215 - Ditto; 100mm tebal No 1,212.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0216 setara dengannya (Equivalent) berukuran 610mm x
No 425.00
475mm x 38mm tebal
PD0217 - Ditto; 50mm tebal No 579.00
PD0218 - Ditto; 100mm tebal No 985.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0219 setara dengannya (Equivalent) berukuran 610mm x
No 536.00
610mm x 38mm tebal
PD0220 - Ditto; 50mm tebal No 731.00
PD0221 - Ditto; 100mm tebal No 1,250.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0222 Setara dengannya (Equivalent) berukuran 711mm x
No 621.00
610mm x 38mm tebal
PD0223 - Ditto; 50mm tebal No 844.00
PD0224 - Ditto; 100mm tebal No 1,449.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0225 setara dengannya (Equivalent) berukuran 838mm x
No 725.00
610mm x 38mm tebal
PD0226 - Ditto; 50mm tebal No 988.00
PD0227 - Ditto; 100mm tebal No 1,697.00

110
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0228 setara dengannya (Equivalent) berukuran 900mm x
No 1,131.00
900mm x 38mm tebal
PD0229 - Ditto; 50mm tebal No 1,542.00
PD0230 - Ditto; 100mm tebal No 2,660.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0231 setara dengannya (Equivalent) berukuran 915mm x
No 789.00
610mm x 38mm tebal
PD0232 - Ditto; 50mm tebal No 1,075.00
PD0233 - Ditto; 100mm tebal No 1,848.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0234 setara dengannya (Equivalent) berukuran 1067mm x
No 914.00
610mm x 38mm tebal
PD0235 - Ditto; 50mm tebal No 1,247.00
PD0236 - Ditto; 100mm tebal No 2,148.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0237 setara dengannya (Equivalent) berukuran 1219mm x
No 1,041.00
610mm x 38mm tebal
PD0238 - Ditto; 50mm tebal No 1,418.00
PD0239 - Ditto; 100mm tebal No 2,447.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0240 setara dengannya (Equivalent) berukuran 1371mm x
No 1,166.00
610mm x 38mm tebal
PD0241 - Ditto; 50mm tebal No 1,591.00
PD0242 - Ditto; 100mm tebal No 2,745.00

111
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0243 setara dengannya (Equivalent) berukuran 1523mm x
No 1,293.00
610mm x 38mm tebal
PD0244 - Ditto; 50mm tebal No 1,762.00
PD0245 - Ditto; 100mm tebal No 3,044.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0246 setara dengannya (Equivalent) berukuran 1675mm x
No 1,418.00
610mm x 38mm tebal
PD0247 - Ditto; 50mm tebal No 1,934.00
PD0248 - Ditto; 100mm tebal No 3,342.00

Membekal dan Memasang FRP Minimesh Grating


Mainhole (FRP Mainhole Cover) termasuk FRP Frame
dan lengkap dengan FRP Chequered Plate , ISO Grey
atau
PD0249 setara dengannya (Equivalent) berukuran 1827mm x
No 1,544.00
610mm x 38mm tebal
PD0250 - Ditto; 50mm tebal No 2,105.00
PD0251 - Ditto; 100mm tebal No 3,641.00

PD0300 FRP SUMP

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0301
termasuk FRP Frame, ISO Grey atau setara dengannya
No 131.00
(Equivalent) berukuran 300mm x 300mm x 38mm tebal

PD0302 - Ditto; 50mm tebal No 186.00


PD0303 - Ditto; 100mm tebal No 318.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran No 230.00
PD0304 300mm x 600mm x 38mm tebal
PD0305 - Ditto; 50mm tebal No 330.00
PD0306 - Ditto; 100mm tebal No 586.00

112
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran No 281.00
PD0307 375mm x 600mm x 38mm tebal
PD0308 - Ditto; 50mm tebal No 402.00
PD0309 - Ditto; 100mm tebal No 720.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0310 termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran 300mm x 1200mm x 38mm No 430.00
tebal
PD0311 - Ditto; 50mm tebal No 618.00
PD0312
- Ditto; 100mm tebal No 1,121.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0313
termasuk FRP Frame, ISO Grey atau setara dengannya
No 430.00
(Equivalent) berukuran 600mm x 600mm x 38mm tebal
PD0314 - Ditto; 50mm tebal No 618.00
PD0315 - Ditto; 100mm tebal No 1,121.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0316
termasuk FRP Frame, ISO Grey atau setara dengannya
No 351.00
(Equivalent) berukuran 610mm x 475mm x 38mm tebal
PD0317 - Ditto; 50mm tebal No 506.00
PD0318 - Ditto; 100mm tebal No 911.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0319
termasuk FRP Frame, ISO Grey atau setara dengannya
No 443.00
(Equivalent) berukuran 610mm x 610mm x 38mm tebal

PD0320 - Ditto; 50mm tebal No 638.00


PD0321 - Ditto; 100mm tebal No 1,156.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran No 512.00
PD0322 711mm x 610mm x 38mm tebal

113
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


PD0323 - Ditto; 50mm tebal No 735.00
PD0324
- Ditto; 100mm tebal No 1,340.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran No 598.00
PD0325 838mm x 610mm x 38mm tebal
PD0326 - Ditto; 50mm tebal No 861.00
PD0327 - Ditto; 100mm tebal No 1,570.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0328
termasuk FRP Frame, ISO Grey atau setara dengannya
No 928.00
(Equivalent) berukuran 900mm x 900mm x 38mm tebal
PD0329 - Ditto; 50mm tebal No 1,339.00
PD0330 - Ditto; 100mm tebal No 2,458.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0331
termasuk FRP Frame, ISO Grey atau setara dengannya
No 649.00
(Equivalent) berukuran 915mm x 610mm x 38mm tebal

PD0332 - Ditto; 50mm tebal No 935.00


PD0333 - Ditto; 100mm tebal No 1,708.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0334 termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran 1067mm x 610mm x 38mm No 751.00
tebal
PD0335 - Ditto; 50mm tebal No 1,084.00
PD0336 - Ditto; 100mm tebal No 1,984.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0337 termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran 1219mm x 610mm x 38mm No 855.00
tebal
PD0338 - Ditto; 50mm tebal No 1,232.00
PD0339 - Ditto; 100mm tebal No 2,260.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)

114
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


PD0340 termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran 1371mm x 610mm x 38mm No 957.00
tebal
PD0341 - Ditto; 50mm tebal No 1,381.00
PD0342 - Ditto; 100mm tebal No 2,535.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0343 termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran 1523mm x 610mm x 38mm No 1,060.00
tebal
PD0344 - Ditto; 50mm tebal No 1,530.00
PD0345 - Ditto; 100mm tebal No 2,811.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0346 termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran 1675mm x 610mm x 38mm No 1,162.00
tebal
PD0347 - Ditto; 50mm tebal No 1,678.00
PD0348 - Ditto; 100mm tebal No 3,086.00

Membekal dan Memasang FRP Minimesh Grating


Sump (FRP Sump Cover)
PD0349 termasuk FRP Frame, ISO Grey atau setara dengannya
(Equivalent) berukuran 1827mm x 610mm x 38mm No 1,265.00
tebal
PD0350 - Ditto; 50mm tebal No 1,826.00
PD0351 - Ditto; 100mm tebal No 3,362.00

PD0400 FRP LANTAI KAYU


Membekal dan memasang FRP Wooden Plank atau
setara dengannya (Equivalent) bersaiz 180mm x 40mm m 132.00
x 4mm
PD0401
Membekal dan memasang FRP Wooden Plank atau
setara dengannya (Equivalent) bersaiz 90mm x 25mm x m 87.00
PD0402 4mm

Membekalkan dan memasang FRP Wooden Plank


PD0403 m 82.00
bersaiz 75mm x 35mm x 6.3mm

membekalkan dan memasang FRP Wooden Plank


PD0404 m 109.00
bersaiz 127mm x 42mm x 6mm

PD0500 FRP 'HANDRAIL'

115
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)

Membekal dan memasang FRP dan lengkap dengan


FRP Cap atau setara dengannya (Equivalent)

PD0501 - Square Hollow FRP 76mm x 76mm x 4mm thk m 185.00


PD0502 - Rectangular Hollow FRP 52mm x 32mm x 5mm thk m 98.00
PD0503 - Round Tube FRP 25mm diameter m 26.00

Membekal dan memasang FRP Round Tube 50mm


diameter atau setara dengannya (Equivalent)
PD0504 - Round Tube 50mm diameter m 94.00
PD0505 - 'elbow' jenis FRP 50mm dia. nos 38.00
PD0506 - 'T - jointing' jenis FRP 50mm dia. nos 32.00
PD0507 - 'bracket base' jenis FRP 50mm dia.
nos 35.00
PD0600 FRP 'FLOATING JETTY'
Membekalkan FRP Floating Jetty bersaiz 12.00m (P) X
1.50M(L)

HPDE Pontoon 500mm (P) X 500mm (L) X 400MM (Ht) nos 469.00

FRP Square Hollow 76 x 76 x 76mm (Thk) m 153.00


FRP Minimesh Grating 19/19/38 x 38 x 38mm (thk) m2 855.00
termasuk FRP Handrail (Type C)
FRP Rectangular Hollow 75 x 35 x 5mm (thk) m 82.00
FRP Rectangular Hollow 52 x 32 x 5mm (thk) m 79.00
FRP Round Tube 32mm diameter m 34.00
FRP Cap nos 25.00
QA0100 TURFING

Grass must grow closed, short but fertile and its also
must have less than 5% in any other weed-size pieces
and at least 225 mm x 150 mm (flat area)

QA0101 Provide and lay turves of cow grass (Axonopus m 13.00


Compressus) and include for pegging in "Close-Turfing"
and 6 months maintenance and tending until turves
thrive. The contractor shall inform the Architect
Landscape of thus source of supply of all turves used on
the works

QA0102 Do but in "Spot Turfing" where specified and 300mm m 8.00


center to center.

QA0103 Do- Bermuda tifdwarf m 50.00

QA0104 Do - Stemotsphrum secundatum (White Grass) m 45.00

116
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


QA0105 Do -Zoysia tenufloria m 50.00

QA0106 Do- Pearl Grass m 60.00

QA0107 Do- Marimo papspalum m 50.00

Top Dressing

QA0108 Supply and spread 50 mm top soil with fertilizer on the m 15.00
ground surface prior to receiving grass. The contractor
shall follow with the standard and approval of the
Landscape Architect

QC0100 SUBSOIL DRAINAGE

QC0101 Supply and lay fully filtered, prefabricated subsoil m 8.60


drainage system (according to manufacturers
instruction) equivalent to STRIPDRAIX ( by NYLEX)
40mm x 100mm section.

QC0102 Ditto - 40 mm x 300 mm section m 20.10

QC0103 Ditto - 40 mm x 500 mm section m 32.80

QC0104 Supply and lay UV stablilised geotextille (equivalent to m 5.75


typar 3407). Include for wrapping round and bonding
with STRIPDRAIN (by NYLEX). Ends of STRIPDRAIN
tobe taped using PVC duct tape.

QC0105 Supply and lay subsoil drainage termination using m 40.25


100mm dia. PVC pipe. Include for cutting slot at the
PVC pipes to fit subsoil drainage system.

QC0106 Supply and lay 100mm dia. Class B G.I pipe. Include m 46.00
for connection to 100mm dia. PVC pipe.

QB0107 Supply and lay 150mm dia. PVC pipe on 100mm thick m 103.50
hardcore and river sand surround including all
necessary excavation back filling and carting away all
excavated material.

RA0100 INTERLOCKING CONCRETE PAVING, CLAY PAVER


GRANITE TILED & MISCELLANEOUS FOOTPATH
RA0101 INTERLOCKING PAVERS
RA0102 Supply all plant and labour and excavate to formation m 1.70
level to depth not exceeding 100mm and cart all
excavated materials away from site as directed. Roll
formation with a roller of not less than 2 tonne weight to
consolidate the sub-grade.
RA0103 Do- but exceeding 100mm and not exceeding 200mm m 3.20
and -do-

117
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


RA0104 Supply crusher run stone from an approved quarry and m 10.35
spread over formation, fill interstices with a proportion of
smaller gauge stones packed to a consolidated
thickness or not less than 100mm and roll with a roller of
not less than 2 tonne weight true line, camber and level.

RA0105 Supply approved sand, trasport to site spread, roll and m 4.60
consolidate to thickness less than 30mm with a roller of
not less than 2 tonne weight.

RA0106 Provide and lay 1:2:3-20mm aggregate concrete in edge m 278.30


restrain. Includes for all mixing, placing vibrating and
consolidating as required. Include formwork and other
necessary works.
RA0107 Supply and lay approved interlocking paving units to m 60.95
approved colour (s) and pattern (s) of 60mm thick from
approved manufacturer, transport to site and lay exact
line, level and gradient as required on prepared sand
bedding as described.
RA0108 Do- but for 80mm heavy duty interlocking paving units m 74.75
and -do-
RA0109 Provide labour and materials, careffuly take out existing m 27.60
interlocking paving units, excavate formation to a depth
not exceeding 140mm remove all excavated material
from site. Supply crusher run stone of granite for
limestone from an approved quarry and spread over
formation and consolidate with an 8 tonne roller or
powered wacker true line, camber and level to a
consolidated thickness of not less than 100mm. Supply
approved sand, spread over crucher run stone
foundation, roll and consolidate to thickness not less
than 30mm with roller not less than 2 tonne weight or
powered wacker. Lay the existing interlocking paving
units back to exact line, level and gradient as required
on the prepared sand bedding as described.

RA0110 Provide labour and materials, carefully take out existing m 13.80
interlocking paving units, transport to Dewan Bandaraya
Store at Jalan Cheras or to any site in the Wilayah
Persekutuan Kuala Lumpur as directed by the S.O

118
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


TUKANG JUBIN
Jubin dinding gerlis berukuran 150mm x 150mm x
12mm atau 108mm x 108mm x 5mm dari bahan yang
terbaik seperti mana yang dikehendaki. Semua genting-
genting yang membulat tepinya melengkuk di bahagian
tengah dan lain-lain mestilah sejajar dengan genting
dinding dalam semua keadaan.

Pengubinan dan lepekan mestilah mengandungi satu


lapisan mortar yang bersesuaian dengan tebal yang
dikehendaki dan disudahi dengan permukaan rata dan
licin. Jubin 'mosaic' mestilah mengandungi genting
'mosaic' 'semivitreous'.

Semua jubin mestilah tepat ukurannya dan bebas dari


kerosakan serta mestilah dipadat kemaskan dengan
mortar simen (1:3). Semua sambungan genting-genting
mestilah ditutup dengan mortar simen dan simen putih.

Kadar harga untuk jubin-jubin termasuk semua alat-alat


sementara untuk menentukan rata kayu penutup
sambungan dan kerja-kerja di bahagian sempit,
memotong dan benda-benda yang terlebih.

RB0100 CLAY PAVERS


RB0101 Supply and lay approved 50mm CLAY PAVER approved m 80.50
colour (s) and pattern (s) from and approved
manufacturer, transport to site and lay exact line, level
and gradient as required on prepared sand bedding as
described.
RB0102 Do- but 60mm and -do- m 86.25
RB0103 Do- but 70mm CLAY PAVER and -do- m 95.45
RC0100 COMPRESSED DECORATIVE CONCRETE TILES

RC0101 Provide and lay 50mm thick 1:2:4-20mm aggregate m 57.50


concrete as base for laying COMPRESSED
DECORATIVE CONCRETE TILES inclusive of steel
reinforcement type BRC fabric No. A10 concrete base to
include expansion joint of epoxy type at every 10 meter
intervals.
RC0102 Supply and lay approved COMPRESSED m 138.00
DECORATIVE CONCRETE TILES 400mm x 400mm
dimensions with exposed chippings or short blasted
texture to approved colour, pattern and surface texture
of 50mm thickness from approved manufacturer,
transport to site and lay to prepared concrete base as
described and 100mm crusher run surface measured
separately.

119
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


RC0103 Simen dan pasir (1:3) ubinan atau skrid 18mm tebal m2 13.60
yang dirata licin atau disiapkan untuk menerima genting
lantai

RC0104 Jubin mosaic 25mm x 25mm x 5mm separuh gerlis m2 68.10


tidak temasuk skrid

RC0105 20mm x 200mm x16mm jubin terazzo berwarna putih m2 76.00


tidak termasuk skrid

RC0106 300mm x 300mm x 1.6mm jubin lantai vinyl tidak m2 55.70


termasuk skrid

RC0107 300mm x 300mm x 2mm jubin lantai vinyl tidak m2 65.00


termasuk skrid

RC0108 300mm x 300mm x 2.5mm jubin lantai vinyl tidak m2 74.80


termasuk skrid

RC0109 Membekal dan memasang baru jubin lantai jenis m2 68.10


mosaic 25mm x 25mm

RC0110 Membekal dan memasang baru jubin lantai jenis m2 74.20


mosaic 50mm x 50mm
RC0111 Membekal dan memasang baru jubin lantai jenis glazed m2 74.20
tiles 100mm x 200mm

RC0112 Membekal dan memasang baru jubin lantai jenis tile m2 94.10
200mm x 200mm
RC0113 Membekal dan memasang baru jubin lantai tile 300mm m2 96.60
x 300mm

RC0114 Memecah dan membersihkan segala ubinan genting m2 5.90


dan ratakan semula jalur-jalur potongan untuk
menerima yang baru

RC0115 Memotong, memecah dan membersihkan segala m2 13.60


ubinan dan skrid dan ratakan semula serta adakan jalur-
jalur potongan untuk menerima yang baru di permukaan
konkrit. (Pengiraan untuk pemecahan jubin tidak akan
dikira berasingan jika skrid juga perlu dipecahkan)

RC0116 Kerja-kerja mengikis dan membersihkan keseluruhan m2 24.70


permukaan kemasan lantai jenis 'vinyl' dan getah
(potruding rubber-mat) dari segala kekotoran serta
mencuci bersih dan membaikpulih mana-mana
kerosakan pada permukaan lantai

RC0117 Kerja-kerja membekal dan memasang baru jubin liku m2 24.70


(coving tiles).

120
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


RC0118 Kerja-kerja membekal dan memasang baru jubin lantai m2 117.65
dari jenis 'homogenous' berukuran 300mm x 300mm x
5mm dari jenama 'White Horse' atau setanding
dengannya.
RC0119 Kerja-kerja membekal dan memasang baru jubin lantai m2 148.60
dari jenis 'homogenous' berukuran 400mm x 400mm x
5mm dari jenama 'White Horse' atau setanding
dengannya.
RC0120 Kerja-kerja membekal dan memasang baru jubin lantai m2 173.30
dari jenis 'homogenous' berukuran 600mm x 600mm x
5mm dari jenama 'White Horse' atau setanding
dengannya.
RC0121 Kerja-kerja membekal dan memasang baru jubin lantai m2 173.30
jenis 'Polish tiles' berukuran 300mm x 300mm x 6mm
dari jenis 'White Horse' atau setanding dengan warna,
bentuk dan ukuran jubin adalah mengikut arahan
Pegawai Projek
RC0122 Kerja-kerja membekal dan memasang baru jubin lantai m2 198.00
jenis 'Polish tiles' berukuran 400mm x 400mm x 6mm
dari jenis 'White Horse' atau setanding dengan warna,
bentuk dan ukuran jubin adalah mengikut arahan
Pegawai Projek

RC0123 Kerja-kerja membekal dan memasang baru jubin lantai m2 210.45


jenis 'Polish tiles' berukuran 600mm x 600mm x 6mm
dari jenis 'White Horse' atau setanding dengan warna,
bentuk dan ukuran jubin adalah mengikut arahan
Pegawai Projek
RC0124 Kerja-kerja membekal dan memasang baru jubin lantai m2 136.20
dari jenis 'Tile MML RUSTIK-RCR28' berukuran 300mm
x 300mm x 6mm homogenous atau setanding dengan
warna, bentuk dan ukuran jubin adalah mengikut arahan
Pegawai Projek

.
RC0125 Kerja-kerja membekal dan memasang baru jubin lantai m2 154.80
dari jenis 'Reconstitude Rough Face Granite'
berukuran 100mm x 100mm x 11mm dari jenis MML-
RFG 604 atau setanding dengan warna, bentuk dan
ukuran jubin adalah mengikut arahan Pegawai Projek.

RC0126 Kerja-kerja membekal dan memasang baru kemasan m2 371.30


lantai 'natural marble granite' dari jenis MML-RFG
atau setanding berukuran 600mm x 600mm x 12mm
tebal dengan warna, bentuk dan ukuran jubin mengikut
arahan Pegawai Projek.

RC0127 Kerja-kerja membekal dan memasang baru kemasan m2 618.90


lantai 'natural marble granite' dari jenis MML-RFG
atau setanding berukuran 600mm x 600mm x 20mm
tebal dengan warna, bentuk dan ukuran jubin mengikut
arahan Pegawai Projek.

121
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


RC0128 Kerja-kerja menyelenggara/ membaikpulih dan m2 92.80
menampal semula getah alas tangga yang tertanggal di
tempat duduk penonton dan tempat duduk VIP

RC0128 Kerja-kerja menyelenggara/ membaikpulih nosing dari ka.pjg 18.90


jenis aluminium yang telah rosak di tangga tempat
duduk penonton dan tempat duduk VIP

RD0100 HOMOGENEOUS GRANITE TILES


RD0101 Supply and lay 5mm x 100mm premolded expansion m 9.20
joint filler.
RD0102 Supply and lay 5mm x 15mm joint sealer. m 13.80

RD0103 Supply and lay 15mm thick leveling screed. m 11.50


RD0104 Supply and lay 6mm thick bonding layer LATICRETE m 13.80
3802 with cement mix.
Membekal dan memasang Unglazed Homogenus m 189.75
Granite Tile saiz 95mm x 95mm x 11mm di atas konkrit
tersedia dengan menggunakan Latex Portland Bonding
Cement Morrtar dan Portland Cement sebagai bahan
penyambung.

Membekal dan memasang Unglazed Homogenus m 230.00


Granite Tile saiz 95mm x 95mm x 15mm di atas konkrit
tersedia dengan menggunakan Latex Portland Bonding
Cement Morrtar dan Portland Cement sebagai bahan
penyambung.

RD0108 Supply and lay Granolithic Finish Over newly laid


concrete bedding using LOCAL Chipping. m 136.85

RD0109 Do - but shanghai plaster -do- m 46.00

RD0110 Do - but pebble wash finish over newly laid concrete


bedding using local stone m 184.00

RD0111 Provide all labour, material and equipment to produce


concrete stamping imprint finishes as required on
prepared bedding, exact line, level and gradient. m 161.00
Designed approved by L.A.

RD0112 Do but stencil imprint -do- m 138.00

RD0113 Do but spray on imprint -do- m 138.00

RD0114 Do but EPDM -do- m 138.00


RD0115 Provide all labour, material and equipment to produce
'Cement Ferro Finishes' as required on prepared
bedding, exact line, level and gradient. Price included
formwork, reinforced concrete and painting/shelex. m 305.00
Designed approved by L.A.

122
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


RD0116 Decorative stone finishes
Supply all labour, material and tools to provide or spread
decorative river stone finishes for any landscape Kg 23.00
designed required and all other related works.

RD0117 Do but .lime stone -do- Kg 28.75


RD0118 Do but .castle stone -do- Kg 28.75

RD0119 Supply and lay Non-Slip Heavy Duty Homogenous


Granite Tile Extruted Split Tile size 145mm x 15mm
over newly laid concrete bedding using Latex Portland m 138.00
Bonding Cement Mortar and Portland Cement as grout
joint.
RD0120 Supply and lay Unglazed Split Quarry Tiles (size 204mm
x 204mm x 25mm) over newly laid concrete bedding
with cement screed using Latex Portland Bonding
Cement Mortar and Portland Cement as grout joint all in m 149.50
accordance to the manufacturers specification. The
colour and pattern of the tile shall be as approved by the
S.O.

RD0121 Supply and lay Decorative Coloured Pigmented


Concrete Slab finish size 400mm x 400mm x 30mm)
over newly laid concrete bedding with cement screed
using Latex Portland Bonding Cement Mortar and
Portland Cement as grout joint all in accordance to the m 138.00
manufacturers specification. The colour and pattern of
the slab shall be determined by the S.O

RD0122 Supply and lay Shot-Blasted Exposed Chipping


Concrete Slab finish size 400mm x 400mm x 30mm)
over newly laid concrete bedding with cement screed
using Latex Portland Bonding Cement Mortar and
Portland Cement as grout joint all in accordance to the m 184.00
manufacturers specification. The colour and pattern of
the slab shall be determined by the S.O

RD0200 POROUS CONCRETE PAVEMENT

Supply and lay porous concrete pavement (hydromedia)


100 mm thickness with 5 mm 10 mm size chippings
and short blasted texture. Work shall be include for
RD0201 m 302.00
excavation, 150 mm compacted crusher run, formwork
and all necessary works. The colour and pattern of the
slab shall be determined by S.O

123
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)

Supply and lay porous concrete pavement (hydromedia)


150 mm thickness with 5 mm 10 mm size chippings
and short blasted texture. Work shall be include for
RD0202 m 377.00
excavation, 150 mm compacted crusher run, formwork
and all necessary works. The colour and pattern of the
slab shall be determined by S.O

RE0100 INTERLOCKING
RE0101 Membekal peralatan perlu dan mesin serta tenaga m 2.99
pekerja untuk kawasan bagi memasang siarkaki,
termasuk memandatkan tanah
RE0102 Membekal peralatan perlu dan mesin serta tenaga m 9.20
pekerja untuk meratakan batu Crusher Run setebal
100mm dan memandatkannya bagi tujuan kawasan
bagi memasang siarkaki.
RE0103 Membekal peralatan perlu dan mesin serta tenaga m 3.00
pekerja untuk meratakan pasir sungai setebal 30mm
dan memandatkannya bagi tujuan memasang siarkaki.

RE0104 Membekal dan meratakan konkrit aggregate 1:2:4 m 305.90


(20mm tebal).

RE0105 Membekal dan memasang interlocking paving (60mm m 92.00


tebal) sama seperti kawasan sekitarnya (mengikut
kelulusan Jabatan Landskap & Rekreasi)

RE0106 Membekal dan memasang heavy duty interlocking m 109.25


paving (80mm tebal) sama seperti kawasan sekitarnya
(mengikut kelulusan Jabatan Landskap & Rekreasi).

RE0107 Kerja-kerja membuka 'interlocking pavers' sediada dan m2 30.95


disimpan untuk diguna semula serta membersihkan
tapak tersebut.

Kerja-kerja membuka dan membuang 'interlocking


RE0108 pavers'sediada ke tempat yang diarahkan oleh Pegawai m2 15.00
Projek dan membersihkan tapak tersebut.

Membekal dan meratakan serta memampatkan tanah


RE0109 pasir setebal 30mm untuk peyediaan tapak bagi m2 14.80
meletakkan paving block.

Membekal dan memasang baru 'interlocking pavers'


berbetuk ukiran bunga atau setanding mengikut arahan
RE0110 m2 74.30
Pegawai Projek dari jenis heavy duty 80mm tebal dan
dipasang mengikut kecerunan yang sesuai.

Mengangkut interlocking pavers dari tempat simpanan


RE0111 dan memasang semula di tempat yang diarahkan oleh m2 49.60
pegawai projek

124
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)

Menyediakan pekerja dan peralatan perlu untuk


membuka interlocking tiles secara cermat (tujuan
RE0112 m 32.20
digunakan semula) dan meratakan semula pasir serta
memasang semula interlocking tiles yang telah dibuka.

RF0100 PEMBEKALAN BERKAITAN DENGAN


PENYELENGGARAAN AWAM
RF0101 Membekal dan menghantar pasir sungai bertapis, bersih m 63.25
dan sesuai untuk kerja-kerja konkrit dan untuk kerja-
kerja perataan asas.

RF0102 Membekal dan menghantar batu chipping ke Jabatan Tan 103.50


Landskap & Rekreasi

RF0103 Membekal dan menghantar interlocking paving (80mm m 74.75


heavy duty interlocking).

RF0104 Membekal dan menghantar clay paver (50mm). m 63.25


RF0105 Membekal dan menghantar clay paver (60mm) m 65.00

RF0106 Membekal dan menghantar clay paver (70mm) m 75.00

RF0107 Membekal batu aggregate bersaiz 1-2 ke Jabatan Tan 97.75


Landskap & Rekreasi

RF0108 Membekal dan menghantar simen untuk kegunaan Bag 23.00


Jabatan Landskap & Rekreasi (satu bag = 50kg)

RF0109 Membekal dan menghantar metro stone (saiz 40cm x m 92.00


40cm x 4cm)
RF0110 Membekal dan menghantar cobbler stone (saiz 40cm x m 138.00
40cm x 4cm)

RF0111 Membekal dan menghantar tanah (subsoil) m 23.00

RF0112 Membekal crusher run ke Jabatan Landskap dan Tan 92.00


Rekreasi

RF0113 Cat Minyak Liter 42.00


RF0114 Cat Air Liter 42.00
SA0100 RECONSTRUCTION WORKS
SA0101 Cut and excavate to break up existing road pavement m 120.00
including the crusher run base to a depth not exceeding
325mm and dispose to sites to be provided by the
Contractor

SA0102 Do as item SA0102 above but to a depth exceeding m 130.00


325mm, and not exceeding 400 mm, and -do-

SA0103 Do as item SA0102 above but to a depth exceeding m2 125.00


400mm, and not exceeding 475 mm, and -do-

125
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


SA0104 Membekal dan meratakan serta memadatkan m2 14.80
tanah/pasir (sub-base) setebal tidak melebihi 150mm
untuk peyediaan tapak bagi meletakkan lapisan 'crusher
run' (sub-grade)

SA0105 Membekal dan meratakan serta memadatkan lapisan m2 19.80


crusher run (sub-grade) setebal tidak melebihi 100mm
dan meletakan lapisan 'quarry dust' pada permukaan
'crusher-run' termasuk kerja-kerja pemadatan
menggunakan mesin pemadat untuk peyediaan tapak
bagi meletakkan lapisan premix.

SA0106 Membekal dan menyediakan lapisan permukaan m2 2.50


'cationic bituminous emulsion' (40%) pada kadar 1.5
sq.m per litre tack coat sebelum kerja-kerja
menyediakan permukaan premix diljalankan.

SA0107 Membekal dan menyediakan lapisan permukaan m2 9.90


'premixed bituminous macadam (20mm size granite
agg) dari pembekal yang diluluskan termasuk kos
pengangkutan ke tapak bina, dibentang dan dipadatkan
pada ketebalan tidak melebihi 50mm dengan jentera
pemadat tidak melebihi 10 tan atau mesin pemadat
yang diluluskan oleh pegawai projek.
SA0108 Supply sand or other approved sub-base materials, fill m 51.75
and compact to levels as directed.

SA0109 Supply crushed aggregates from any approved quarry, m 23.00


spread and compact over formation in two equal layers
to a consolidated thickness of not less than 225mm true
to line, level and camber.

SA0110 Supply cationic bitumen emulsion (RS-1K) and spread m 2.50


at an approximate rate of 0.4-0.5 litres/m2 over
consolidated road base.

SA0111 Purchase approved premixed asphaltic concrete, m 42.55


transport to site, lay and compact to a consolidated
thickness of not less than 80 mm as a binder course
(Mix ACB)

SA0112 Purchase approved premixed asphaltic concrete, m 27.60


transport to site, lay and roll to a consolidated thickness
of not less than 50 mm as a wearing course (Mix ACW1
or ACW2)

SB0100 OVERLAY

126
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


SB0101 Supply cationic bitumen emulsion (RS-1K) and spread m 2.50
at an approximate rate of 0.4-0.5 litres/m2 over existing
road.

SB0102 Purchase approved premixed asphaltic concrete, m 25.30


transport to site lay and roll to a consolidated thickness
of not less than 40 mm as a wearing course (mix ACW1
or ACW2)
SB0103 Supply, lay and compact "Cold Mix" for pothole patching m 460.00
using plate compactor and other equipment required to
duly complete the patching works or as instructed by the
S.O.

SC0100 MILING AND PAVING WORKS


SC0101 Mill 50 mm in single pass over exist, pavement,clean m 6.90
and disposed waste to DBKL stores as directed bt the
S.O.
SC0102 Mill exceeding 50 mm, but not exceeding 100 mm and m 9.20
do -as- per item 4-5-1
SC0103 Supply cationic bitumen emulsion (RS-1K) and spread m 2.50
at an approximate rate of 0.4-0.5 litres/m2 over milled
surfaces.
SC0104 Purchase approved premixed asphaltic concrete, m.ton 253.00
transport to site lay and roll over the rehabilitated area
as a binder course (mix ACB)
SC0105 Purchase approved premixed asphaltic concrete, m 27.60
transport to site lay and roll to a consolidated thickness
of not less than 50 mm as a wearing course (mix ACW1
or ACW2)

SD0100 STONE MASTIC ASPHALT

SD0102 Supply cationic bitumen emulsion (RS-2K) AS specified m2 2.90


and spread at an approximate rate of 0.4-0.5 litres/m2
over the milled and cleaned surfaces or existing
pavement surfaces.

SD0103 Purchase approved stone mastic asphalt (with premium m2 74.75


grade bitumen) as specified transport to site, lay and roll
to a consolidated thickness of not less than 50mm.

PENENTUAN

KAYU
Kesemua kayu yang digunakan hendaklah mengikut
senarai berikut melainkan dicatitkan :

Kumpulan Kelas 'A' - Cengal, Balau, Kempas, Kulim

127
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


Kumpulan Kelas 'B' - Merbau Resak, Tembusu,
Keruing, Kapor, Merawan,
Keledang, Mengkulang
Kumpulan Kelas 'C' - Meranti, Nyatoh, Bintangor,
Durian, Kedondong, Merbawa

Kumpulan Kelas 'D' - Geronggong

Kesemua kayu hendaklah daripada yang terbaik, kering


dengan sempurna dan dibumbu dengan sempurna,
bersih dari sebarang getah, retak-retak, penjuru yang
susut, simpulan yang besar, longgar dan bengap dan
dari sebarang keburukan yang lain.

Pemborong-pemborong hendaklah menggantikan


kesemua kayu yang membengkok, memutar atau yang
melahirkan sebarang kecacatan yang lain dengan
perbelanjaan sendiri.

Harga-harga untuk kesemua kayu termasuk juga


memotong, menetak, menggerek, memberam,
memasang, merapeh, merencong, melekap, melubang
dan menubing, menanggam, menyekaf (scarfing),
membaji, siku lidah, pinggir yang dirambahkan dan
dibulatkan, kayu-kayu pendek berbentuk sudut-sudut,
cabang-cabang, tanggam kepada bata serta bujaran-
bujaran pendek dan pekerjaan lain-lain yang serupa.
Harga-harga itu hendaklah termasuk juga kesemua
paku, pacang-pacang, peretap, gam, timah merah dan
putih dan sokongan-sokongan sementara.

TA0100 MEMBEKAL & MEMASANG PAPAN/KAYU

TA0101 Membekal dan memasang papan kayu kelas A m 287.50


berketam bersaiz 6" X 6"
TA0102 Membekal dan memasang papan kayu kelas A m 132.25
berketam bersaiz 4" X 4"
TA0103 Membekal dan memasang papan kayu kelas A m 97.75
berketam bersaiz 3" X 4"
TA0104 Membekal dan memasang papan kayu kelas A m 80.50
berketam bersaiz 2" X 5"
TA0105 Membekal dan memasang papan kayu kelas A m 57.50
berketam bersaiz 2" X 4"

TA0106 Membekal dan memasang papan kayu kelas A m 42.55


berketam bersaiz 2" X 3"

TA0107 Membekal dan memasang papan kayu kelas A m 28.75


berketam bersaiz 2" X 2"

128
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


TA0108 Membekal dan memasang papan kayu kelas A m 11.50
berketam bersaiz 1" X 2"
TA0109 Membekal dan memasang papan kayu kelas A m 5.75
berketam bersaiz 1" X 1"
TA0110 Membekal dan memasang papan kayu kelas A m 57.50
berketam bersaiz 1" X 8"
TA0111 Membekal dan memasang papan kayu kelas A m 42.55
berketam bersaiz 1" X 6"

UA0100 REFLEKSOLOGI

UA0101 Membekal dan memasang refleksologi termasuk kerja- m 600.00


kerja mengecat seperti yang diarahkan oleh Pegawai
Penguasa

UA0200 PERABOT TAMAN

UA0201 Supply and installed Cast aluminium Alloy Bollard No 632.50


UA0202 Supply and installed Recycle Rubber Bollard No 534.75
UA0203 Supply and Installed Fibre Glass Bollard No 460.00
Supply and installed Concrete Bollard with Pebble Wash
UA0204 No 600.00
Finishes

UA0205 Supply and Installed Galvanised Steel Bollard No 620.00


UA0206 Membekal dan memasang bangku taman, jenis antik
dengan rangka cast iron, tempat duduk serta penyandar
dari kayu cengal dan ditanam kakinya pada tapak No 1,495.00
konkrit

UA0207 Membekal dan memasang bangku taman jenis konkrit


bertetulang bersaiz 1830mm panjang x 450mm lebar x
450mm tinggi termasuk 'arm rest' dan disudahi dengan
kemasan pebble wash/tile. Rujuk pelan seperti No 2,200.00
dilampiran. Kerja-kerja termasuk membersihkan tapak,
menyediakan kotak bentuk dan tetulang besi. The
colour shall be as approved by the L.A

UA0208 Membekal dan memasang bangku taman jenis terazo No 437.00


model n dan ditanam kakinya pada tapak konkrit

UA0209 spt di atas untuk model "L" No 460.00

UA0210 spt di atas untuk model S No 460.00

UA0211 Membekal dan memasang meja taman jenis terazo Set 1,092.50
bentuk bulat beserta 4 bangku

UA0212 Membekal dan memasang meja picnic. No. 1,725.00

129
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


No 330.00
Membekal dan memasang tong sampah gantung jenis
polyethelene beserta tiang m.s dan ditanam pada asas
konkrit

UA0213 Membekal tong sampah gantung jenis polyethelene No 300.00


beserta tiang m.s ke Jabatan Pembangunan Landskap
& Rekreasi

Membekal dan memasang tong sampah jenis konkrit


bersaiz 700 mm tinggi x 600 mm diameter, dengan
penutup bersaiz 300 mm tinggi x 500 mm diameter,
tapak konkrit 650 mm x 650 mm termasuk 'weep hole'
UA0214 No 2,400.00
dan disudahi dengan kemasan 'pebble wash'.
The colour,pattern & material(cover/layer inside) shall
be as approved by the L.A.
(Rujuk pelan/gambarajah yang dilampirkan)

UA0215 Tong Sampah Kayu No 2,800.00

UA0216 Tong Sampah Jenis Stainless Steel No 3,360.00

UA0217 Membekal dan memasang papan tanda "Taman


Permainan Kanak-Kanak" jenis color bond zink sheet 1
muka, tulisan jenis sticker, ukuran 4 x 6 beserta tiang No 1,840.00
m.s 3 dia. Tinggi 106 dan ditanam pada asas konkrit

UA0218 Membekal dan memasang papan tanda "Taman No 2,415.00


Permainan Kanak-Kanak" jenis color bond zink sheet 2
muka, tulisan jenis sticker, ukuran 4 x 6 beserta tiang
m.s 3 dia. Tinggi 106 dan ditanam pada asas konkrit

UA0219 Membekal pelapik duduk buaian jenis transmission belt No 180.00


6 x 24 x 4 ply beserta stainless steel bracket ke
Jabatan Pembangunan Landskap & Rekreasi

UA0220 Membekal dan memasang pelapik duduk buaian jenis No 210.00


transmission belt 6 x 24 x 4 ply beserta stainless steel
bracket

UA0221 Membekal dan memasang rantai buaian 8mm G.I m 34.50


berserta shakel

UA0222 Membekal rantai buaian 8mm G.I berserta shakel ke m 25.00


Jabatan Pembangunan Landskap & Rekreasi

UA0223 Membekal dan memasang tiang gol bolasepak dari besi No 1,035.00
paip jenis G.I. Class B 3 dia. Ukuran 20 lebar dan 8
tinggi dari aras tanah termasuk kerja menanam dalam
asas konkrit serta dicat dengan satu lapis cat tahan
karat dan dua lapis cat kilat

UA0224 Membekal dan mengganti/memasang baru ring dan No. 322.00


jaring bola keranjang

130
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


UA0225 Membekal dan mengganti/memasang baru jaring bola No. 34.50
keranjang

VA0100 KERJA-KERJA MENGECAT PERALATAN


PERMAINAN & PERABOT TAMAN

Mengikis dan mengecat 1 lapisan cat anti karat(logam)


atau cat asas (kayu) dan dikemaskan dengan mengecat
2 lapisan cat kilat/timber tone di semua permukaan
logam/kayu
VA0101 Monkey Climb (Medium) No 517.50

VA0102 Monkey Climb (Large) No 747.50

VA0103 Spider Web No 287.50

VA0104 Konkrit Step Tower No 575.00

VA0105 Climbing Tower No 149.50

VA0106 Roket Slide No 747.50

VA0107 Big Boy No 575.00

VA0108 Buaian Rumah Eskimo No 517.50

VA0109 Traktor No 402.50

VA0110 Terowong / Culvert No 92.00

VA0111 Gelongsor Palong No 402.50

VA0112 Chain Climbing (Large) No 1,380.00


VA0113 Tiang Bola Sepak No 57.50

VA0114 Tiang Gelanggang Bola Tampar No 34.50

VA0115 Tiang Gelanggang Badminton / Sepaktakraw No 23.00

VA0116 Mengecat 2 lapisan road paint untuk garisan No 345.00


gelanggang Bola Tampar

VA0117 Mengecat 2 lapisan road paint untuk garisan No 287.50


gelanggang Badminton / Sepaktakraw
VA0118 Tiang Gelanggang Bola Keranjang No 172.50

VA0119 Mengecat 2 lapisan road paint untuk garisan No 460.00


gelanggang Bola Keranjang

VA0120 Buaian 2 Tempat Duduk No 230.00

VA0121 Buaian 3 Tempat Duduk No 287.50

VA0122 Buaian 4 Tempat Duduk No 402.50


VA0123 See-saw No 172.50
VA0124 Playground Modular Set (small size) No 862.50

131
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


VA0125 Playground Modular Set (medium size) No 1,495.00

VA0126 Playground Modular Set (large size) No 2,127.50

VA0127 Meja Berkelah No 80.50

VA0128 Bangku Taman No 46.00

VA0129 Wakaf (Small) No 977.50

VA0130 Wakaf (Medium) No 1,207.50

VA0131 Wakaf (Large) No 1,552.50

VA0132 Kerja-kerja membuka alat permainan(besi), mengikis


karat dan kotoran pada permukaan besi, mengecat
semula menggunakan 'Powder Coating Finishes' dan m2 250.0
memasang semula peralatan tersebut.

VA0200 MENCUCI PERALATAN MODULAR SET


Kerja-kerja mengikis segala kekotoran, mengosok,
mencuci dan membersihkan permukaan dengan
pancutan air (water jet) dan bahan pencuci kimia yang
diluluskan

VA0201 Playground Modular Set (small size) No 850.00

VA0202 Playground Modular Set (medium size) No 1,450.00

VA0203 Playground Modular Set (large size) No 2,100.00

PERALATAN ALAT PERMAINAN KANAK-KANAK


(MODULAR SET)
WA0100 ACCESSES / ACCESS CLIMBER & ACCESSORIES

WA0101 Arch Climber c/w 1 pair of loops Set 2,340.00


WA0102 Loops only Pair 900.00
WA0103 Beanstalk Climber No 3,300.00
WA0104 Cargo Chain Net No 3,228.00
WA0105 Curly Climber No 2,970.00
WA0106 Double Vertical Ladder No 2,850.00
WA0107 Vertical Rope Net Climber No 1,650.00
WA0108 Fireman Post No 1,800.00
WA0109 Hopscoth Climber No 2,808.00
WA0110 Matrix No 3,984.00
WA0111 Mountain Climber (1.0m) No 2,970.00
WA0112 Rock Climber No 3,828.00
WA0113 Rope Climber No 3,750.00
WA0114 Spider Web Net 1 set 2,028.00

132
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA0115 Staircase c/w Handrail No 3,150.00
WA0116 Staircase Handrail only 1 pair 1,284.00
WA0117 Timber Log Climber No 3,150.00
WA0118 Transfer Plaform (Sq. Platform) No 5,700.00

WA0119 Transfer Plaform (Tri. Platform) No 5,250.00


WA0120 Tree Climber No 2,340.00
WA0121 Vertical Chain Net Climber No 3,684.00
WA0122 Chian Net only No 1,650.00

WA0123 Vertical Ladder (0.6m) No 2,184.00

WA0124 Vertical Ladder (1.0m) No 2,328.00

WA0125 Vertical Ladder (1.3m) No 2,484.00

WA0126 Vertical Ladder (1.6m) No 2,628.00

WA0127 Vertical Rope Climber (1.0m) No 3,228.00

WA0128 Vertical Tube Tunnel (1.6m) No 8,028.00


WA0129 Vertical Tube Tunnel 2.7m) No 9,828.00
WA0130 Wavy Chain Net Climber c/w loops No 2,250.00

133
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA0131 Wavy Rope Net Climber c/w loops No 2,850.00

WA0200 DECK / BRIDGE DECK


WA0201 8-Sided Deck No 7,350.00

WA0202 Arch Bridge Deck No 6,300.00

WA0203 Balcony Deck c/w Safety Rail No 5,628.00


WA0204 Balcony Deck No 3,528.00

WA0205 Half Deck No 1,800.00

WA0206 Half Hexagon Deck No 5,400.00

WA0207 Hexagon Deck No 7,200.00


WA0208 Square Deck No 3,450.00
WA0209 Suspension Bridge Deck (2.4m) No 6,150.00
WA0210 Triangle Deck No 2,250.00
WA0211 Plastisol Seat on Deck No 1,350.00

WA0300 BRIDGES c/w Standard Panel / Rail

WA0301 Arch Bridge c/w Safety Rail No 7,800.00


WA0302 Balancing Log Bridge No 8,250.00
WA0303 Chain Net Bridge No 7,800.00
WA0304 Clatter Bridge c/w Safety Rail No 8,250.00

WA0305 Curve Bridge c/w Safety Rail No 7,800.00

WA0306 Handicapped Ramp c/w Safety Rail No 15,828.00

WA0307 Suspension Bridge c/w Mushroom Rail No 7,800.00

WA0308 Rope Net Bridge No 8,250.00

WA0309 Stepper Bridge No 7,800.00

WA0400 CUSTOM DESIGN BRIDGE PANEL / RAIL

WA0401 Cyber Round Peeping Panel No 5,250.00

WA0402 Cyber Triangle Bridge Panel No 5,250.00

WA0403 Fish Bridge Panel No 3,300.00


WA0404 Flower Bridge Panel No 3,450.00

WA0405 Gear Bridge Panel (Punch-hole) No 3,450.00

WA0406 Mushroom Bridge Panel (Punch-hole) No 6,150.00


WA0407 Music Graphic Bridge Panel No 3,750.00
WA0408 Musical Bridge Panel No 5,700.00

134
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA0409 Seahorse Bridge Panel No 3,450.00
WA0410 Sliding Bridge Panel No 3,000.00

WA0500 STANDARD ACTIVITY & SAFETY PANEL


WA0501 760mm diameter Tube Panel No 2,700.00
WA0502 Balcony Rail No 2,130.00
WA0503 Arcylic Bubble Panel No 3,150.00
WA0504 Acrylic Bubble without Panel No 1,728.00

WA0505 Bubble Panel (1.8mth Punch-hole) No 3,600.00


WA0506 Castle Panel (Lower) No 2,700.00

WA0507 Castle Panel (Upper) No 1,650.00


WA0508 'n' You Tube Panel (1.2m) No 2,700.00
WA0509 Numbering Panel c/w Plastic Holder No 3,600.00

WA0510 Safety Rail (1.2m) No 1,260.00


WA0511 Safety Rail (1.8mth) No 1,134.00
WA0512 Safety Rail (2.4m) No 2,184.00
WA0513 Slot Panel (1.2m) No 2,700.00
WA0514 Steering Wheel c/w Safety Rail No 1,950.00
WA0515 Tic-Tac-Toe c/w Safety Rail No 2,928.00
WA0516 Tic-Tac-Toe c/w Plastic Holder No 3,600.00
WA0517 Tube Panel (1.2m) No 1,800.00
WA0518 Tube Panel (1.8m punch-hole) No 2,028.00

WA0600 CUSTOM DESIGN ACTIVITY & SAFETY PANEL


WA0601 Algebra Panel No 2,250.00
WA0602 Bunga Raya Panel No 1,800.00
WA0603 Crayon Picket (imported item) No 3,750.00
WA0604 Cyber Round Panel (1.2m Punch-hole)) No 2,700.00

WA0605 Cyber Round Panel (1.8mth Punch-hole) No 3,300.00

WA0606 Cyber Triangle Panel (1.2m) No 2,700.00


WA0607 Fish Panel No 1,800.00
WA0608 Flower Panel No 1,950.00
WA0609 Lion Panel No 3,750.00
WA0610 Gear Panel No 1,950.00
WA0611 Monkey Panel No 3,750.00
WA0612 Mickey Mouse Panel No 2,250.00

135
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA0613 Mushroom Panel (1.8mth) No 3,300.00
WA0614 Little Mushroom Panel (1.2m) No 2,550.00
WA0615 Mushroom Rail (3 little Mushroom) No 3,900.00
WA0616 Slant Clock Panel (1.8m punch-hole) No 4,200.00
WA0617 Star Fish Panel No 3,900.00
WA0618 Sliding Panel No 2,400.00

WA0700 CLIMBER / OVERHEAD CLIMBER WITHOUT


PLATFORM

WA0701 Challenge Ladder c/w Two Rund Ladder No 3,204.00


WA0702 Coster Link No 3,750.00
WA0703 Curve Ladder No 3,450.00
WA0704 Curve Ring Trek No 2,700.00
WA0705 Double Ring Trek No 3,900.00
WA0706 Horizontal Loop Ladder No 2,784.00
WA0707 Human Ladder No 3,300.00
WA0708 Human Ladder (3 human) No 5,250.00
WA0709 Loop Beam Overhead Ladder No 2,700.00
WA0710 Rainbow Climber (1.2m) No 3,300.00
WA0711 Rainbow Climber (1.4m) No 3,900.00
WA0712 Rainbow Climber (1.6m) No 4,428.00
WA0713 Ring Trek No 2,400.00
WA0714 Ring only No 288.00
WA0715 'S' Ladder No 5,784.00
WA0716 'S' Ring Trek No 5,250.00
WA0717 Sky Rider without platforms No 6,750.00
WA0718 Sky Rider c/w 2 platforms No 9,000.00
WA0719 Sky Rider Hander only No 984.00
WA0720 Trick Ladder No 3,528.00
WA0721 Wave Ladder No 2,784.00
WA0722 Mountain Climber (3 sections) No 5,784.00
WA0723 Climb Across No 5,328.00
WA0724 Roundabout Ladder No 3,984.00

WA0800 CRAWL TUNNEL c/w PANELS

WA0801 90 Crawl Tube Tunnel No 7,950.00

136
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA0802 60 Crawl Tube Tunnel No 5,850.00
WA0803 Short Tube Tunnel No 5,328.00

WA0804 Half Transparent Short Tube Tunnel No 4,128.00

WA0805 1600 Straight Tube Tunnel No 5,760.00

WA0806 1600 HT Straight Tube Tunnel No 6,600.00


WA0807 2400 Straight Tube Tunnel No 7,728.00
WA0808 2400 HT Staright Tube Tunnel No 8,028.00

WA0809 'S' Tube Tunnel No 5,328.00


WA0810 Space Ball Crawl Tunnel No 18,750.00
WA0811 Uplink 'C' Tube Tunnel No 14,400.00

WA0812 Uplink 'S' Tube Tunnel No 5,328.00

WA0900 TUBE SLIDE (640 mm dia.)

WA0901 Straight Tube Slide (1.0m) No 5,400.00


WA0902 1300 Tube Slide No 6,840.00
WA0903 1600 Rainbow Tube Slide No 9,360.00
WA0904 1600 Spiral Tube Slide No 10,128.00
WA0905 1800 RainbowTub Slide No 10,800.00
WA0906 2200 Rainbow Tube Slide No 12,600.00
WA0907 2700 Rainbow Tube Slide No 14,280.00
WA0908 2700 Spiral Tube Slide No 14,700.00
WA0909 3300 Rainbow Tube Slide No 15,750.00
WA0910 Middle Tube No 2,600.00
WA0911 Exit Tube No 2,148.00
WA0912 Exit Tube Holder No 1,284.00
WA0913 Tube Supporting Post No 750.00

WA1000 OPEN SLIDE c/w SLIDE ENCLOSURE


WA1001 Double Long Wave Slide No 9,750.00
WA1002 Double Short Wave Slide No 8,250.00
WA1003 Long Wave Slide No 4,950.00
WA1004 Short Wave Slide No 2,700.00
WA1005 Spiral Slide No 14,850.00
WA1006 Slide Enclosure (bolt-in) No 684.00
WA1007 Slide Enclosure (Clamp) No 828.00

137
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA1100 ROOFING
STANDARD POLYTHLENE ROOF
WA1101 Semi-Dome Roof No 4,800.00
WA1102 Star Roof No 3,300.00

STANDARD STEEL ROOF


WA1103 Hexagon (Rainbow) Roof No 5,250.00
WA1104 Pyramid Square Cone Roof No 5,100.00
WA1105 Pyramid Hexagon Cone Roof No 5,700.00

CUSTOM / CONCEPTUAL DESIGN ROOF

WA1106 China Town Roof No 6,000.00


WA1107 Kelatan Roof No 6,300.00
WA1108 Melaka Mosque Roof No 6,300.00
WA1109 Terangganu Roof No 6,000.00

WA1200 SWING & ACCESSORIES

WA1201 2-seater swing c/w flat seats No 3,300.00


WA1202 3-seater swing c/w flat seats No 4,728.00
WA1203 4-seater swing c/w flat seats No 6,300.00
WA1204 5-seater swing c/w flat seats No 7,350.00

WA1205 2-seater Mini swing c/w flat seats No 3,150.00

ACCESSORIES
WA1206 Flat seat c/w Plastisol coated chain No 750.00
WA1207 Toddler seat c/w Plastisol coated chain No 1,128.00
WA1208 Belt seat c/w Plastisol coated chain No 750.00
WA1209 Flat seat No 600.00
WA1210 Toddler seat No 820.00
WA1211 Belt seat No 600.00
WA1212 Conveyer belt seat No 192.00

WA1300 SEE SAW & ACCESSORIES

WA1301 2-seater Spring See Saw No 3,300.00


WA1302 2-seater Single Spring See Saw No 3,150.00
WA1303 4-seater INTER-See Saw No 3,984.00
WA1304 4-seater INTER-'X' See Saw No 6,450.00
WA1305 4-Seater INTER-Double See Saw No 6,000.00

138
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA1306 Spring Fire Engine No 8,400.00

ACCESSORIES

WA1307 Polyethylene Saddle Seat No 600.00

WA1400 SPRING RIDER & ACCESSORIES

WA1401 Cutie Fox No 2,784.00


WA1402 Little Lamb No 2,784.00
WA1403 Baby Dino No 2,784.00
WA1404 Bird Flat No 2,484.00
WA1405 Horse Flat No 2,484.00

WA1406 Camel Flat No 2,484.00


WA1407 Camel Flat No 2,484.00
WA1408 Spring Jelly Fish No 2,784.00
WA1409 Spring Nemo No 2,784.00
WA1410 Spring Turtle No 2,784.00
WA1411 Triple Flat Spring Rider No 6,300.00

ACCESSORIES

WA1412 High Density Coil Spring No 1,950.00


WA1413 Aluminium Spring Body only No 1,800.00
WA1414 Flat Spring Body only No 1,284.00

WA1500 INDEPENDENT SLIDE & ACCESSORIES

WA1501 Independent Short Slide (1.0mht) No 5,850.00


WA1502 Independent Long Slide (1.6mht) No 7,350.00
WA1503 Independent Double Long Slide (1.6mht) No 9,750.00
WA1504 Independent Double Short Slide (1.0mht) No 8,250.00
WA1505 Independent Spiral Tube Slide (1.6mht) No 10,350.00
WA1506 Independent Spiral Slide (1.6mht) No 12,750.00

WA1600 OTHER INDEPENDENT PLAY ITEMS

WA1601 Floating Steps No 5,400.00


WA1602 Log Roll No 2,484.00
WA1603 Roll' only No 1,650.00
WA1604 Round Spring Board No 4,650.00
WA1605 Surfing Spring Board No 5,100.00

139
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA1606 'S' Walk No 1,470.00
WA1607 Merry-Go-Round No 9,750.00
WA1608 Play Telescope No 1,320.00
WA1609 Moon Climber (2.0m diameter) No 4,500.00
WA1610 Moon Climber (4.0m diameter) No 8,250.00
WA1611 Moon Climber (7.0m diameter) No 12,750.00
WA1612 Moon Climber Plate only No 450.00
WA1613 Moon Climber Cross Bar only No 450.00
WA1614 Jump 'n' Bounce (5 pcs) No 4,950.00
WA1615 Speaker No 2,250.00
WA1616 Backhoe Digger No 4,650.00
WA1617 Rock 'n' Roll No 4,200.00
WA1618 Dolphin Swing See Saw No 4,800.00
WA1619 Starie Swing See Saw No 4,800.00
WA1620 Flowerie Swing See Saw No 4,800.00
WA1621 Twister No 4,128.00
WA1622 Moon Rider No 5,250.00

WA1700 GENERAL ACCESSORIES

WA1701 Cross Bar (bolt-in) No 828.00


WA1702 Cross Bar (Clamp) No 828.00
WA1703 Post No 1,440.00
WA1704 Post cap No 90.00
WA1705 Clamp No 270.00
WA1706 Plastic End Cap No 156.00
WA1707 Sign Board No 1,920.00
WA1708 Tube Support Post No 720.00
WA1709 Tube Support C Bracket No 120.00
WA1710 Tube Support C No 1,140.00
WA1711 Exit Tube Support No 264.00
WA1712 T Nut No 6.00
WA1713 S/S Spring Washer No 6.00
WA1714 S/S Washer No 6.00
WA1715 S/S Button Cap Screw No 6.00
WA1716 S/S Nylok Nut No 6.00

140
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


WA1717 Holder Bracker No 9.60
WA1718 J Bolt No 192.00

WA1719 Kick Plate No 300.00

XA0100 PARCOURSE FITNESS EQUIPMENT


XA0101 Horizontal Ladder No. 3,960.00
XA0102 Parallel Bar No. 2,880.00
XA0103 Hamstrung Stretch No. 3,240.00
XA0104 Balance Beam No. 3,240.00
XA0105 Spring Up No. 2,880.00
XA0106 Leg Stretch No. 2,880.00
XA0107 Push Up No. 2,880.00
XA0108 Vault Bar No. 3,132.00
XA0109 Jump Touch Bar No. 3,420.00
XA0110 Body Curl No. 3,840.00
XA0111 Log Hop No. 3,972.00
XA0112 Sit Up No. 3,916.80
XA0113 Sit Reach No. 3,384.00
XA0114 Knee Lift No. 2,640.00
XA0115 Archiless Stretch No. 2,640.00
XA0116 Chin Up Bar No. 3,120.00
XA0117 Vertical Ladder No. 3,600.00
XA0118 Step Up No. 3,012.00
XA0119 Beam Hop No 3,444.00
XA0120 Signage - Aluminium Composite Signage

Membekal dan memasang Aluminium Composite No. 456.00


Signage berukuran standard berserta dengan tiang
2" dia. M.S. x 4' panjang dan tanam dalam campuran
asas konkrit .

XA0200 OUTDOOR GYM FITNESS EQUIPMENT


XA0201 Double Sky Walker No. 5,400.00

XA0202 Body Twister No. 4,800.00

XA0203 Double Leg Stretch Station No. 6,500.00

XA0204 Double Stretch Steering Wheel(4 wheels) No. 5,280.00

XA0205 Multifunction Gym No. 7,200.00

XA0206 Rowing Machine No. 5,880.00

141
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


XA0207 Horse Rider No. 4,320.00

XA0208 Sky Walker No. 5,060.00


XA0209 Single Stretch Steering Wheel (2 wheels) No. 4,460.00
XA0300 Loose Item

XA0301 Bearing Parcourse No. 180.00

XA0302 Rubber Stopper No. 180.00

XA0303 Cycling Paddle No. 180.00

XA0400 INTERGRATED MODULAR SET


XA0401 To install modular set (Proposal A) including: set 16,100.00
S-Tunnel Slide
Double Slide
Flat Entrance Ladder
Fireman Climber/Pole
XOX Panel
Triangle Deck
Square Deck
Roof

XA0402 To install modular set (Proposal B) including: set 32,200.00


S-Tunnel Slide
Double Slide
Speedy Slide
S-Tunnel Crawlway
Flat Entrance Leader
XOX Panel
Steering Panel
Track Ride
Triangle Deck
Square Deck
Roof

XA0403 To install modular set (Proposal C) including: set 48,300.00


S-Tunnel Slide
Double Slide
Fun Slide
Straight Crawlway
Flat Entrance Ladder
XOX Panel
HDPE Clock Panel
Clover Climber
Hurly Burly Climber
Monkey Bar
Mini Dome Bridge

142
JADUAL KADAR HARGA BAGI KERJA-KERJA PENYELENGGARAAN

KOD KETERANGAN UNIT HARGA(RM)


Log Roll
Ropeller
Triangle Deck
Square Deck
Roof
XA0404 To install modular set (Proposal D) including: set 78,200.00
S-Tunnel Slide
Double Slide
Speedy Slide
S-Tunnel Crawlway
Flat Entrance Ladder
HDPE Clock Panel
Step Climber
Wobbler Climber
Vertical Climber
Rug Ladder
Horizontal Loop Ladder
Wobbler Crossing
Track Ride
Triangle Deck
Square Deck
Roof
XA0500 Seamless Flooring
XA0501 Membekal dan memasang 'seamless flooring' tebal m2 276.00
25mm. Harga termasuk 'SBR base mate' tebal 15mm
dan 'EPDM color finish' tebal 10mm.
XA0502 Membuka seamless/rubber flooring yang pecah dan m2 10.30
rosak serta buang ditempat yang diarahkan oleh
Pegawai Penguasa
XA0600 Melepine
XA0601 Membekal dan memasang melipine 15mm 3 ply. Kerja- m2 645.00
kerja termasuk memotong, membentuk, memasang
skru dan segala keperluan yang berkaitan mengikut L.A.
approval
XA0602 Membekal dan memasang melipine 12mm 3 ply. Kerja- m2 545.00
kerja termasuk memotong, membentuk, memasang
skru dan segala keperluan yang berkaitan mengikut L.A.
approval
XA0603 Membekal dan memasang baru paparan (backboard) m2 1,000.00
gol bola keranjang daripada jenis acrylic. Kerja-kerja
termasuk membuka paparan lama
Spesifikasi : tebal : 15 mm
XA0604 Membekal dan memasang baru paparan (backboard) m2 1,700.00
gol bola keranjang daripada jenis acrylic. Kerja-kerja
termasuk membuka paparan lama.
Spesifikasi : tebal : 25 mm

143

You might also like