Doc No

AA 1
AA 35
AA 45
AA 46
AAMA 101
AAMA 501
AAMA 606.1
AAMA 607.1
AAMA 608.1
AAMA 609.1
AAMA 610.1
AAMA 800
AAMA 1102.7
AATCC 20
AATCC 70
AATCC 127
ABMA 12.1
ABMA 12.2
ABMA 18.1
ABMA 18.2
ABMA 19.1
ABMA 19.2
ABMA 20
ABMA 22.1
ABMA 22.2
ABMA 23.2
ABMA 24.1
ABMA 24.2
ABMA 25.2
ABMA 26.2
ACI 207.4R
ACI 210R
ACI 211.1
ACI 214
ACI 304.5R
ACI 306.1
ACI 306R
ACI 308

ACI 318/318R
ACI 336.2R
ACI 346
ACI 346R
ACI SP-15
ACI 503.1
ACI 503R
ACI 506R
ACI 544.2R
ACI SP-66
ACI 116R
ACI 201.1R
ACI 201.2R
ACI 207.1R
ACI 207.2R
ACI 211.2
ACI 211.3R
ACI 213R
ACI 221R
ACI 223
ACI 224R
ACI 301
ACI 302.1R
ACI 303R
ACI 304.2R
ACI 304.3R
ACI 304.4R
ACI 304R
ACI 305R
ACI 309R
ACI 311.4R
ACI 347R
ACI 506.1R
ACI 506.2
ACI 506.3R
ACI 515.1R
ACI 517.2R
ACI 530.1
ACI 544.1R
ADA 1
ADA 8

ADA 30
CSA/AM
A21.14
CSA/AM ANSI
Z21.22
CSA/AM ANSI
Z21.41
CSA/AM ANSI
Z21.41A
CSA/AM ANSI
Z21.47
CSA/AM ANSI
Z21.47A
CSA/AM ANSI
Z21.47B
CSA/AM
CSA/ANSI
Z21.10.1
CSA/AM
CSA/ANSI
Z21.10.1A
CSA/AM
CSA/ANSI
Z21.10.1B
CSA/AM
CSA/ANSI
Z21.18
CSA/AM
CSA/ANSI
Z21.66
CSA/AM
Z21.13
CSA/AM
Z21.13A
CSA/AM
Z21.13B
CSA/AM
Z21.64
CSA/AM
Z21.64A
CSA/AM
CSA/ANSI
Z83.8B

CSA/AM
CSA/ANSI
Z83.11
CSA/AM
CSA/ANSI
Z83.11B
CSA/AM Z83.3
CSA/AM
Z83.3A
CSA/AM
Z83.3B
CSA/AM
Z83.6A
CSA/AM
Z83.6B
CSA/AM
Z83.12
CSA/AM
Z83.13
CSA/AM
Z83.14
CSA/AM
Z83.15
AGMA 904C96
AGMA 908B89
AGMA 2000A88
AGMA 2001C95
AGMA 2003B97
AGMA 2004B89
AGMA 2005C96
AGMA 2011A98
AGMA 6001D97
AGMA 6010F97

AGMA 6021G89
AGMA 6034B92
AGMA 6109A00
AGMA 9000C90
AGMA 9002A86
AIA/NAS NA
0001
AIA/NAS NAS
1
AIA/NAS NA
0002
AIA/NAS NA
0003
AIA/NAS
NASM3
AIA/NAS NA
0004
AIA/NAS
NASM4
AIA/NAS NA
0005
AIA/NAS
NASM5
AIA/NAS NA
0006
AIA/NAS
NASM6
AIA/NAS NA
0007
AIA/NAS
NASM7
AIA/NAS NA
0008
AIA/NAS
NASM8
AIA/NAS NA
0009
AIA/NAS
NASM9

AIA/NAS
NASM10
AIA/NAS NAS
183
AIA/NAS
NASM12
AIA/NAS NA
0013
AIA/NAS NA
0014
AIA/NAS
NASM14
AIA/NAS NA
0015
AIA/NAS NA
0016
AIA/NAS
NASM16
AIA/NAS NA
0017
AIA/NAS
NASM17
AIA/NAS NA
0018
AIA/NAS
NASM18
AIA/NAS NA
0019
AIA/NAS NA
0020
AIA/NAS
NASM20
AIA/NAS NA
0021
AIA/NAS NA
0022
AIA/NAS NAS
1121
AIA/NAS NAS
1122
AIA/NAS NAS
1123
AIA/NAS NAS
1124

AIA/NAS NAS
1125
AIA/NAS NAS
1126
AIA/NAS NAS
1127
AIA/NAS NAS
1128
AIA/NAS NA
0023
AIA/NAS NA
0024
AIA/NAS NA
0025
AIA/NAS NAS
1740
AIA/NAS NA
0026
AIA/NAS NA
0027
AIA/NAS NA
0028
AIA/NAS NA
0029
AIA/NAS NA
0030
AIA/NAS NA
0033
AIA/NAS NA
0034
AIA/NAS NA
0035
AIA/NAS NA
0036
AIA/NAS NA
0037
AIA/NAS NA
0038
AIA/NAS NA
0039
AIA/NAS NA
0040
AIA/NAS NA
0041

AIA/NAS NA
0042
AIA/NAS NAS
42
AIA/NAS
NASM42
AIA/NAS NAS
43
AIA/NAS
NASM43
AIA/NAS NA
0044
AIA/NAS
NASM44
AIA/NAS NA
0045
AIA/NAS
NASM45
AIA/NAS NA
0046
AIA/NAS
NASM46
AIA/NAS NA
0047
AIA/NAS NAS
47
AIA/NAS
NASM47
AIA/NAS
NASM48
AIA/NAS NA
0049
AIA/NAS
NASM49
AIA/NAS NA
0050
AIA/NAS NA
0051
AIA/NAS NA
0052
AIA/NAS NA
0053
AIA/NAS NA
0054

AIA/NAS NA
0055
AIA/NAS NA
0056
AIA/NAS NA
0057
AIA/NAS NA
0058
AIA/NAS NA
0059
AIA/NAS NA
0060
AIA/NAS
NASM21047
AIA/NAS
NASM21299
AIA/NAS
NASM21314
AIA/NAS
NASM21315
AIA/NAS NA
0061
AIA/NAS
NASM45938/1
AIA/NAS NA
0064
AIA/NAS NA
0065
AIA/NAS NA
0066
AIA/NAS NA
0067
AIA/NAS NA
0068
AIA/NAS NA
0069
AIA/NAS NA
0070
AIA/NAS NA
0071
AIA/NAS NA
0072

AIA/NAS NAS
72
AIA/NAS NA
0073
AIA/NAS NAS
73
AIA/NAS NA
0074
AIA/NAS NAS
74
AIA/NAS NAS
75
AIA/NAS NAS
76
AIA/NAS NA
0077
AIA/NAS NAS
77
AIA/NAS NA
0078
AIA/NAS NA
0079
AIA/NAS NA
0080
AIA/NAS NA
0081
AIA/NAS NA
0082
AIA/NAS NA
0083
AIA/NAS NA
0084
AIA/NAS NA
0085
AIA/NAS NA
0086
AIA/NAS NA
0087
AIA/NAS NA
0088
AIA/NAS NA
0089
AIA/NAS NA
0090

AIA/NAS NA
0091
AIA/NAS NA
0092
AIA/NAS NA
0093
AIA/NAS NA
0094
AIA/NAS NA
0095
AIA/NAS NA
0096
AIA/NAS NA
0113
AIA/NAS NA
0114
AIA/NAS NA
0119
AIA/NAS NA
0120
AIA/NAS NA
0121
AIA/NAS NAS
121
AIA/NAS NA
0122
AIA/NAS NA
0123
AIA/NAS NAS
123
AIA/NAS NA
0124
AIA/NAS NA
0125
AIA/NAS NA
0126
AIA/NAS NA
0127
AIA/NAS NA
0128
AIA/NAS NA
0129
AIA/NAS NA
0130

AIA/NAS NA
0131
AIA/NAS NA
0132
AIA/NAS NA
0133
AIA/NAS NA
0134
AIA/NAS NA
0140
AIA/NAS NA
0141
AIA/NAS
NASM14201
AIA/NAS
NASM28728/1
AIA/NAS
NASM28728/2
AIA/NAS
NASM28728/3
AIA/NAS
NASM28728/4
AIA/NAS
NASM28728/5
AIA/NAS
NASM28728/6
AIA/NAS
NASM28728/7
AIA/NAS
NASM28728/8
AIA/NAS
NASM3926
AIA/NAS
NASM3926/1
AIA/NAS
NASM3926/2

AIA/NAS
NASM3926/3
AIA/NAS
NASM3926/4
AIA/NAS
NASM91528
ANSI C78.1420
ASME
A112.6.3
ASME Y14.100
ASTM A 182/A
182M REV A
ASTM A 192/A
192M
ASTM A 193/A
193M REV B
ASTM A 194/A
194M REV A
ASTM A 20/A
20M REV B
ASTM A 213/A
213M REV A
ASTM A 234/A
234M REV A
ASTM A 249/A
249M REV A
ASTM A 312/A
312M REV A
ASTM A 370
ASTM A 403/A
403M
ASTM A 496
ASTM A 568/A
568M

ASTM A 6/A
6M REV B
ASTM A 733
ASTM A 82
ASTM A 861
REV A
ASTM B 108
REV A
ASTM B 140/B
140M
ASTM B 177
ASTM B 232/B
232M
ASTM B 250/B
250M
ASTM B 272
ASTM B 30
ASTM B 338
REV A
ASTM B 746/B
746M
ASTM C 216
REV A
ASTM C 270
REV A
ASTM C 534
REV A
ASTM C 56
ASTM C 578
ASTM C 822
REV A
ASTM C 827
REV A
ASTM D 1363
ASTM D 1510
REV A
ASTM D 2013
ASTM D 2170
REV A
ASTM D 2172
ASTM D 2414
ASTM D 25
ASTM D 2519

ASTM D 2583
ASTM D 2667
ASTM D 2887
REV A
ASTM D 3701
ASTM D 3841
ASTM D 3960
ASTM D 4000
REV A
ASTM D 4017
ASTM D 4020
REV A
ASTM D 4485
REV A
ASTM D 490
ASTM D
5330/D 5330M
ASTM D 5470
ASTM D 564
ASTM D 600
ASTM D 611
REV B
ASTM D 653
ASTM D 664
ASTM D 69
ASTM D 800
ASTM D 849
ASTM D 878
ASTM D 885
ASTM D 909
ASTM E 1
ASTM E 140
ASTM E 8
ASTM E 8M
ASTM F 1047
ASTM F 137

ASTM F 1603
ASTM F 1667
REV A
ASTM F 288
ASTM F 468
REV A
ASTM F 959M
REV A
CSA/AM
CSA/ANSI
Z83.11A
CSA/AM
CSA/ANSI
Z83.8A
EIA TIA/EIA455-188
EIA TIA/EIA598-B
NSF 5E
SAE AMS
2643C
SAE AMS
2762B
SAE AMS
3374B
SAE AMS
4784F
SAE AMS
4785F
SAE AMS
4786F
SAE AMS
4935G
SAE AMS
5223F
SAE AMS
5363E
SAE AMS
5375E
SAE AMS
5403A
SAE AMS
5404A

SAE AMS
5504M
SAE AMS
5592E
SAE AMS
5629E
SAE AMS
5642K
SAE AMS
5687M
SAE AMS
5697F
SAE AMS
5768K
SAE AMS
5779C
SAE AMS
6267F
SAE AMS
6375B
SAE AMS
6417F
SAE AMS
6425B
SAE AMS
6431L
SAE AMS
7719D
SAE AS 28775
SAE AS 3479C
SAE AS 3480B
SAE AS 3481D
SAE AS 3482B
SAE AS 5176A
SAE AS 5406A
SAE AS
81935A

SAE AS 9449A
SAE AS 9450A
SAE AS 9451A
SAE AS 9452A
SAE AS 9453A
SAE AS 9455A
SAE AS 9456A
SAE AS 9457A
SAE AS 9458A
SAE AS 9516A
SAE AS 9517A
SAE AS 9518A
SAE AS 9520A
SAE AS 9521A
SAE AS 9523A
SAE AS 9525A
SAE AS 9526A
SAE AS 9881A
SAE AS 9882A
SAE J 858
SAE MA
3289A
UL 1082
BULLETINS

UL 1236
BULLETINS
UL 1262
BULLETINS
UL 412
BULLETINS
UL 484
BULLETINS
UL 489
PROPOSED
UL 568
PROPOSED
UL 705
BULLETINS
UL 96
PROPOSED
AIA/NAS NA
0142
AIA/NAS NA
0143
AIA/NAS NA
0144
AIA/NAS NA
0145
AIA/NAS NA
0146
AIA/NAS NA
0147
AIA/NAS NA
0148
AIA/NAS NA
0149
AIA/NAS NA
0150
AIA/NAS NA
0151
AIA/NAS NA
0152
AIA/NAS NA
0153
AIA/NAS NA
0155
AIA/NAS NA
0156

AIA/NAS NA
0157
AIA/NAS NA
0158
AIA/NAS NA
0159
AIA/NAS NA
0160
AIA/NAS NA
0161
AIA/NAS NA
0162
AIA/NAS NA
0163
AIA/NAS NAS
170
AIA/NAS NAS
184
AIA/NAS NAS
186
AIA/NAS NAS
198
AIA/NAS NA
0201
AIA/NAS NA
0202
AIA/NAS NA
0203
AIA/NAS NA
0204
AIA/NAS NA
0211
AIA/NAS NA
0212
AIA/NAS NA
0213
AIA/NAS NA
0221
AIA/NAS NA
0222
AIA/NAS NA
0223
AIA/NAS NA
0224

AIA/NAS
NASM229
AIA/NAS NA
0241
AIA/NAS NA
0242
AIA/NAS NA
0243
AIA/NAS NA
0244
AIA/NAS NA
0245
AIA/NAS NA
0247
AIA/NAS NA
0248
AIA/NAS NA
0249
AIA/NAS NA
0250
AIA/NAS NA
0252
AIA/NAS NA
0253
AIA/NAS
NASM256
AIA/NAS NAS
287
AIA/NAS NAS
302
AIA/NAS
NASM302
AIA/NAS NAS
303
AIA/NAS NAS
304
AIA/NAS NAS
305
AIA/NAS NAS
306
AIA/NAS NAS
307
AIA/NAS NAS
308

AIA/NAS NAS
309
AIA/NAS NAS
310
AIA/NAS
NASM310
AIA/NAS NAS
312
AIA/NAS NAS
313
AIA/NAS NAS
314
AIA/NAS NAS
315
AIA/NAS
NASM315
AIA/NAS NAS
316
AIA/NAS
NASM316
AIA/NAS NAS
317
AIA/NAS NAS
318
AIA/NAS NAS
319
AIA/NAS NAS
320
AIA/NAS
NASM320
AIA/NAS NAS
322
AIA/NAS NAS
323
AIA/NAS NAS
324
AIA/NAS NAS
325
AIA/NAS NAS
326
AIA/NAS NAS
327
AIA/NAS NAS
328

AIA/NAS NAS
329
AIA/NAS NAS
330
AIA/NAS NAS
333
AIA/NAS NAS
334
AIA/NAS NAS
335
AIA/NAS NAS
336
AIA/NAS NAS
337
AIA/NAS NAS
338
AIA/NAS NAS
339
AIA/NAS NAS
340
AIA/NAS NAS
354
AIA/NAS NAS
355
AIA/NAS NAS
356
AIA/NAS NAS
357
AIA/NAS NAS
358
AIA/NAS NAS
359
AIA/NAS NAS
360
AIA/NAS NAS
384
AIA/NAS
NASM386
AIA/NAS NAS
387
AIA/NAS NAS
388
AIA/NAS NAS
390

AIA/NAS NAS
395
AIA/NAS NAS
396
AIA/NAS NAS
397
AIA/NAS NAS
398
AIA/NAS NAS
399
AIA/NAS NAS
410
AIA/NAS NAS
411
AIA/NAS NAS
424
AIA/NAS NAS
427
AIA/NAS NAS
428
AIA/NAS NAS
451
AIA/NAS NAS
463
AIA/NAS NAS
467
AIA/NAS NAS
487
AIA/NAS NAS
488
AIA/NAS NAS
498
AIA/NAS NAS
500
AIA/NAS NAS
501
AIA/NAS
NASM501
AIA/NAS NAS
509
AIA/NAS NAS
513
AIA/NAS NAS
514

AIA/NAS NAS
516
AIA/NAS NAS
517
AIA/NAS NAS
518
AIA/NAS NAS
520
AIA/NAS NAS
521
AIA/NAS NAS
522
AIA/NAS
NASM525
AIA/NAS NAS
529
AIA/NAS NAS
537
AIA/NAS NAS
538
AIA/NAS NAS
549
AIA/NAS NAS
551
AIA/NAS NAS
553
AIA/NAS NAS
557
AIA/NAS NAS
558
AIA/NAS NAS
561
AIA/NAS NAS
562
AIA/NAS NAS
563
AIA/NAS NAS
564
AIA/NAS NAS
565
AIA/NAS
NASM565
AIA/NAS NAS
566

AIA/NAS NAS
567
AIA/NAS NAS
568
AIA/NAS NAS
569
AIA/NAS NAS
570
AIA/NAS NAS
572
AIA/NAS NAS
573
AIA/NAS NAS
574
AIA/NAS NAS
577
AIA/NAS NAS
578
AIA/NAS NAS
591
AIA/NAS NAS
592
AIA/NAS NAS
593
AIA/NAS NAS
594
AIA/NAS NAS
595
AIA/NAS NAS
596
AIA/NAS NAS
597
AIA/NAS NAS
600
AIA/NAS NAS
601
AIA/NAS NAS
602
AIA/NAS NAS
603
AIA/NAS NAS
604
AIA/NAS NAS
605

AIA/NAS NAS
606
AIA/NAS NAS
607
AIA/NAS NAS
617
AIA/NAS NAS
618
AIA/NAS NAS
620
AIA/NAS NAS
621
AIA/NAS NAS
622
AIA/NAS NAS
623
AIA/NAS NAS
624
AIA/NAS NAS
625
AIA/NAS NAS
626
AIA/NAS NAS
627
AIA/NAS NAS
628
AIA/NAS NAS
629
AIA/NAS NAS
630
AIA/NAS NAS
632
AIA/NAS NAS
634
AIA/NAS NAS
636
AIA/NAS NAS
636A
AIA/NAS NAS
638
AIA/NAS NAS
640
AIA/NAS NAS
642

AIA/NAS NAS
644
AIA/NAS NAS
652
AIA/NAS NAS
653
AIA/NAS NAS
654
AIA/NAS NAS
655
AIA/NAS NAS
656
AIA/NAS NAS
657
AIA/NAS NAS
658
AIA/NAS NAS
659
AIA/NAS NAS
661
AIA/NAS NAS
662
AIA/NAS NAS
671
AIA/NAS NAS
673
AIA/NAS NAS
674
AIA/NAS NAS
675
AIA/NAS NAS
676
AIA/NAS NAS
677
AIA/NAS NAS
678
AIA/NAS NAS
679
AIA/NAS NAS
721
AIA/NAS NAS
722
AIA/NAS NAS
723

AIA/NAS NAS
724
AIA/NAS NAS
813
AIA/NAS NAS
814
AIA/NAS NAS
815
AIA/NAS NAS
817
AIA/NAS NAS
818
AIA/NAS NAS
820
AIA/NAS NAS
823
AIA/NAS NAS
831
AIA/NAS NAS
832
AIA/NAS NAS
833
AIA/NAS NAS
834
AIA/NAS NAS
835
AIA/NAS NAS
836
AIA/NAS NAS
837
AIA/NAS NAS
838
AIA/NAS NAS
839
AIA/NAS NAS
840
AIA/NAS NAS
841
AIA/NAS NAS
842
AIA/NAS NAS
843
AIA/NAS NAS
844

AIA/NAS NAS
845
AIA/NAS NAS
846
AIA/NAS NAS
847
AIA/NAS NAS
947
AIA/NAS
NASM961
AIA/NAS
NASM970
AIA/NAS NAS
1003
AIA/NAS NAS
1004
AIA/NAS NAS
1005
AIA/NAS NAS
1006
AIA/NAS NAS
1007
AIA/NAS NAS
1008
AIA/NAS NAS
1009
AIA/NAS NAS
1010
AIA/NAS NAS
1012
AIA/NAS NAS
1014
AIA/NAS NAS
1016
AIA/NAS NAS
1018
AIA/NAS NAS
1020
AIA/NAS NAS
1023
AIA/NAS NAS
1024
AIA/NAS NAS
1025

AIA/NAS NAS
1026
AIA/NAS NAS
1027
AIA/NAS NAS
1028
AIA/NAS NAS
1029
AIA/NAS NAS
1030
AIA/NAS NAS
1031
AIA/NAS NAS
1032
AIA/NAS NAS
1033
AIA/NAS NAS
1034
AIA/NAS NAS
1035
AIA/NAS NAS
1036
AIA/NAS NAS
1037
AIA/NAS NAS
1038
AIA/NAS NAS
1039
AIA/NAS NAS
1040
AIA/NAS NAS
1041
AIA/NAS NAS
1042
AIA/NAS NAS
1043
AIA/NAS NAS
1044
AIA/NAS NAS
1045
AIA/NAS NAS
1046
AIA/NAS NAS
1047

AIA/NAS NAS
1049
AIA/NAS NAS
1050
AIA/NAS NAS
1051
AIA/NAS NAS
1052
AIA/NAS NAS
1053
AIA/NAS NAS
1054
AIA/NAS NAS
1055
AIA/NAS NAS
1056
AIA/NAS NAS
1057
AIA/NAS NAS
1070
AIA/NAS NAS
1080
AIA/NAS NAS
1081
AIA/NAS NAS
1090
AIA/NAS NAS
1091
AIA/NAS NAS
1097
AIA/NAS NAS
1099
AIA/NAS NAS
1101
AIA/NAS NAS
1102
AIA/NAS NAS
1129
AIA/NAS NAS
1130
AIA/NAS NAS
1131
AIA/NAS NAS
1132

AIA/NAS NAS
1133
AIA/NAS NAS
1134
AIA/NAS NAS
1135
AIA/NAS NAS
1136
AIA/NAS NAS
1137
AIA/NAS NAS
1138
AIA/NAS NAS
1141
AIA/NAS NAS
1142
AIA/NAS NAS
1143
AIA/NAS NAS
1144
AIA/NAS NAS
1145
AIA/NAS NAS
1146
AIA/NAS NAS
1147
AIA/NAS NAS
1148
AIA/NAS NAS
1149
AIA/NAS NAS
1151
AIA/NAS NAS
1152
AIA/NAS NAS
1153
AIA/NAS NAS
1154
AIA/NAS NAS
1155
AIA/NAS NAS
1156
AIA/NAS NAS
1157

AIA/NAS NAS
1158
AIA/NAS NAS
1160
AIA/NAS NAS
1161
AIA/NAS NAS
1162
AIA/NAS NAS
1163
AIA/NAS NAS
1164
AIA/NAS NAS
1165
AIA/NAS NAS
1166
AIA/NAS NAS
1167
AIA/NAS NAS
1168
AIA/NAS NAS
1169
AIA/NAS NAS
1170
AIA/NAS NAS
1171
AIA/NAS NAS
1172
AIA/NAS NAS
1173
AIA/NAS NAS
1174
AIA/NAS NAS
1175
AIA/NAS NAS
1176
AIA/NAS NAS
1177
AIA/NAS NAS
1178
AIA/NAS NAS
1181
AIA/NAS NAS
1182

AIA/NAS NAS
1183
AIA/NAS NAS
1184
AIA/NAS NAS
1185
AIA/NAS NAS
1186
AIA/NAS NAS
1187
AIA/NAS NAS
1188
AIA/NAS NAS
1189
AIA/NAS NAS
1190
AIA/NAS NAS
1191
AIA/NAS NAS
1193
AIA/NAS NAS
1195
AIA/NAS NAS
1197
AIA/NAS NAS
1198
AIA/NAS NAS
1199
AIA/NAS NAS
1200
AIA/NAS NAS
1201
AIA/NAS NAS
1202
AIA/NAS NAS
1203
AIA/NAS NAS
1204
AIA/NAS NAS
1205
AIA/NAS NAS
1206
AIA/NAS NAS
1207

AIA/NAS NAS
1208
AIA/NAS NAS
1209
AIA/NAS NAS
1210
AIA/NAS NAS
1211
AIA/NAS NAS
1212
AIA/NAS NAS
1213
AIA/NAS NAS
1216
AIA/NAS NAS
1218
AIA/NAS NAS
1219
AIA/NAS NAS
1221
AIA/NAS NAS
1223
AIA/NAS NAS
1224
AIA/NAS NAS
1225
AIA/NAS NAS
1226
AIA/NAS NAS
1227
AIA/NAS NAS
1228
AIA/NAS NAS
1229
AIA/NAS NAS
1230
AIA/NAS NAS
1231
AIA/NAS NAS
1232
AIA/NAS NAS
1233
AIA/NAS NAS
1234

AIA/NAS NAS
1235
AIA/NAS NAS
1241
AIA/NAS NAS
1242
AIA/NAS NAS
1251
AIA/NAS NAS
1252
AIA/NAS NAS
1261
AIA/NAS NAS
1262
AIA/NAS NAS
1263
AIA/NAS NAS
1264
AIA/NAS NAS
1265
AIA/NAS NAS
1266
AIA/NAS NAS
1267
AIA/NAS NAS
1268
AIA/NAS NAS
1269
AIA/NAS NAS
1270
AIA/NAS NAS
1271
AIA/NAS NAS
1272
AIA/NAS NAS
1273
AIA/NAS NAS
1274
AIA/NAS NAS
1275
AIA/NAS NAS
1276
AIA/NAS NAS
1277

AIA/NAS NAS
1278
AIA/NAS NAS
1279
AIA/NAS NAS
1280
AIA/NAS NAS
1281
AIA/NAS NAS
1282
AIA/NAS NAS
1284
AIA/NAS NAS
1285
AIA/NAS NAS
1287
AIA/NAS NAS
1288
AIA/NAS NAS
1291
AIA/NAS NAS
1292
AIA/NAS NAS
1293
AIA/NAS NAS
1294
AIA/NAS NAS
1295
AIA/NAS NAS
1296
AIA/NAS NAS
1297
AIA/NAS NAS
1298
AIA/NAS NAS
1299
AIA/NAS NAS
1300
AIA/NAS NAS
1301
AIA/NAS
NAM1312-105

AIA/NAS
NAM1312-107
AIA/NAS
NAM1312-108
AIA/NAS
NAM1312-109
AIA/NAS
NAM1312-111
AIA/NAS
NAM1312-113
AIA/NAS
NASM1312
AIA/NAS
NASM1312-1
AIA/NAS
NASM1312-2
AIA/NAS
NASM1312-3
AIA/NAS
NASM1312-4
AIA/NAS
NASM1312-5
AIA/NAS
NASM1312-6
AIA/NAS
NASM1312-7
AIA/NAS
NASM1312-8
AIA/NAS
NASM1312-9
AIA/NAS
NASM1312-10
AIA/NAS
NASM1312-11
AIA/NAS
NASM1312-12

AIA/NAS
NASM1312-13
AIA/NAS
NASM1312-14
AIA/NAS
NASM1312-15
AIA/NAS
NASM1312-16
AIA/NAS
NASM1312-17
AIA/NAS
NASM1312-18
AIA/NAS
NASM1312-19
AIA/NAS
NASM1312-20
AIA/NAS
NASM1312-21
AIA/NAS
NASM1312-22
AIA/NAS
NASM1312-23
AIA/NAS
NASM1312-24
AIA/NAS
NASM1312-25
AIA/NAS
NASM1312-26

AIA/NAS
NASM1312-27
AIA/NAS
NASM1312-28
AIA/NAS
NASM1312-29
AIA/NAS
NASM1312-30
AIA/NAS
NASM1312-31
AIA/NAS NAS
1321
AIA/NAS NAS
1322
AIA/NAS NAS
1323
AIA/NAS NAS
1324
AIA/NAS NAS
1325
AIA/NAS NAS
1326
AIA/NAS NAS
1328
AIA/NAS NAS
1329
AIA/NAS NAS
1330
AIA/NAS NAS
1332
AIA/NAS NAS
1333
AIA/NAS NAS
1334
AIA/NAS NAS
1335
AIA/NAS NAS
1336

AIA/NAS NAS
1337
AIA/NAS NAS
1338
AIA/NAS NAS
1339
AIA/NAS NAS
1340
AIA/NAS NAS
1341
AIA/NAS NAS
1342
AIA/NAS NAS
1343
AIA/NAS NAS
1344
AIA/NAS NAS
1345
AIA/NAS NAS
1346
AIA/NAS NAS
1347
AIA/NAS NAS
1349
AIA/NAS NAS
1351
AIA/NAS NAS
1353
AIA/NAS NAS
1354
AIA/NAS NAS
1352
AIA/NAS NAS
1355
AIA/NAS NAS
1356
AIA/NAS NAS
1357
AIA/NAS NAS
1358
AIA/NAS NAS
1359
AIA/NAS NAS
1360

AIA/NAS NAS
1361
AIA/NAS NAS
1362
AIA/NAS NAS
1363
AIA/NAS NAS
1364
AIA/NAS NAS
1365
AIA/NAS NAS
1366
AIA/NAS NAS
1368
AIA/NAS NAS
1369
AIA/NAS NAS
1370
AIA/NAS NAS
1371
AIA/NAS NAS
1372
AIA/NAS NAS
1373
AIA/NAS NAS
1374
AIA/NAS NAS
1375
AIA/NAS NAS
1376
AIA/NAS NAS
1377
AIA/NAS NAS
1378
AIA/NAS NAS
1379
AIA/NAS NAS
1382
AIA/NAS NAS
1383
AIA/NAS NAS
1384
AIA/NAS NAS
1385

AIA/NAS NAS
1394
AIA/NAS NAS
1395
AIA/NAS NAS
1396
AIA/NAS NAS
1397
AIA/NAS NAS
1398
AIA/NAS NAS
1399
AIA/NAS NAS
1400
AIA/NAS NAS
1401
AIA/NAS NAS
1410
AIA/NAS NAS
1412
AIA/NAS NAS
1413
AIA/NAS NAS
1414
AIA/NAS NAS
1415
AIA/NAS NAS
1416
AIA/NAS NAS
1418
AIA/NAS NAS
1420
AIA/NAS NAS
1422
AIA/NAS NAS
1423
AIA/NAS NAS
1424
AIA/NAS NAS
1425
AIA/NAS NAS
1426
AIA/NAS NAS
1428

AIA/NAS NAS
1430
AIA/NAS NAS
1432
AIA/NAS NAS
1435
AIA/NAS NAS
1436
AIA/NAS NAS
1438
AIA/NAS NAS
1440
AIA/NAS NAS
1442
AIA/NAS NAS
1443
AIA/NAS NAS
1446
AIA/NAS NAS
1448
AIA/NAS NAS
1450
AIA/NAS NAS
1452
AIA/NAS NAS
1453
AIA/NAS NAS
1455
AIA/NAS NAS
1456
AIA/NAS NAS
1458
AIA/NAS NAS
1460
AIA/NAS NAS
1462
AIA/NAS NAS
1463
AIA/NAS NAS
1464
AIA/NAS NAS
1465
AIA/NAS NAS
1466

AIA/NAS NAS
1468
AIA/NAS NAS
1470
AIA/NAS NAS
1472
AIA/NAS NAS
1473
AIA/NAS NAS
1474
AIA/NAS NAS
1475
AIA/NAS NAS
1476
AIA/NAS NAS
1478
AIA/NAS NAS
1480
AIA/NAS NAS
1482
AIA/NAS NAS
1486
AIA/NAS NAS
1488
AIA/NAS NAS
1490
AIA/NAS NAS
1492
AIA/NAS NAS
1493
AIA/NAS NAS
1496
AIA/NAS NAS
1497
AIA/NAS NAS
1498
AIA/NAS NAS
1500
AIA/NAS NAS
1502
AIA/NAS NAS
1512
AIA/NAS NAS
1513

AIA/NAS NAS
1514
AIA/NAS NAS
1515
AIA/NAS
NASM1515
AIA/NAS NAS
1516
AIA/NAS NAS
1518
AIA/NAS NAS
1520
AIA/NAS NAS
1522
AIA/NAS NAS
1523
AIA/NAS NAS
1525
AIA/NAS NAS
1526
AIA/NAS NAS
1528
AIA/NAS NAS
1530
AIA/NAS NAS
1532
AIA/NAS NAS
1535
AIA/NAS NAS
1536
AIA/NAS NAS
1538
AIA/NAS NAS
1540
AIA/NAS NAS
1542
AIA/NAS NAS
1546
AIA/NAS NAS
1548
AIA/NAS NAS
1550
AIA/NAS NAS
1552

AIA/NAS NAS
1553
AIA/NAS NAS
1554
AIA/NAS NAS
1555
AIA/NAS NAS
1556
AIA/NAS NAS
1558
AIA/NAS NAS
1560
AIA/NAS NAS
1562
AIA/NAS NAS
1563
AIA/NAS NAS
1564
AIA/NAS NAS
1578
AIA/NAS NAS
1580
AIA/NAS NAS
1581
AIA/NAS NAS
1587
AIA/NAS NAS
1598
AIA/NAS NAS
1603
AIA/NAS NAS
1604
AIA/NAS NAS
1605
AIA/NAS NAS
1606
AIA/NAS NAS
1607
AIA/NAS NAS
1608
AIA/NAS NAS
1609
AIA/NAS NAS
1610

AIA/NAS NAS
1611
AIA/NAS NAS
1612
AIA/NAS NAS
1613
AIA/NAS NAS
1620
AIA/NAS NAS
1621
AIA/NAS NAS
1622
AIA/NAS NAS
1623
AIA/NAS NAS
1624
AIA/NAS NAS
1625
AIA/NAS NAS
1626
AIA/NAS NAS
1627
AIA/NAS NAS
1628
AIA/NAS NAS
1630
AIA/NAS NAS
1631
AIA/NAS NAS
1632
AIA/NAS NAS
1633
AIA/NAS NAS
1634
AIA/NAS NAS
1635
AIA/NAS NAS
1636
AIA/NAS NAS
1637
AIA/NAS NAS
1640
AIA/NAS NAS
1669

AIA/NAS NAS
1670
AIA/NAS NAS
1671
AIA/NAS NAS
1672
AIA/NAS NAS
1673
AIA/NAS NAS
1674
AIA/NAS NAS
1675
AIA/NAS NAS
1676
AIA/NAS NAS
1677
AIA/NAS NAS
1686
AIA/NAS NAS
1687
AIA/NAS NAS
1688
AIA/NAS NAS
1690
AIA/NAS NAS
1691
AIA/NAS NAS
1703
AIA/NAS NAS
1704
AIA/NAS NAS
1705
AIA/NAS NAS
1706
AIA/NAS NAS
1707
AIA/NAS NAS
1708
AIA/NAS NAS
1709
AIA/NAS NAS
1710
AIA/NAS NAS
1711

AIA/NAS NAS
1712
AIA/NAS NAS
1713
AIA/NAS NAS
1714
AIA/NAS NAS
1715
AIA/NAS NAS
1716
AIA/NAS NAS
1719
AIA/NAS NAS
1720
AIA/NAS NAS
1721
AIA/NAS NAS
1722
AIA/NAS NAS
1724
AIA/NAS NAS
1725
AIA/NAS NAS
1726
AIA/NAS NAS
1727
AIA/NAS NAS
1728
AIA/NAS NAS
1729
AIA/NAS NAS
1730
AIA/NAS NAS
1731
AIA/NAS NAS
1732
AIA/NAS NAS
1734
AIA/NAS NAS
1735
AIA/NAS NAS
1736
AIA/NAS NAS
1738

AIA/NAS NAS
1739
AIA/NAS NAS
1750
AIA/NAS NAS
1751
AIA/NAS NAS
1752
AIA/NAS NAS
1753
AIA/NAS NAS
1754
AIA/NAS NAS
1755
AIA/NAS NAS
1757
AIA/NAS NAS
1758
AIA/NAS NAS
1759
AIA/NAS NAS
1760
AIA/NAS NAS
1761
AIA/NAS NAS
1762
AIA/NAS NAS
1763
AIA/NAS NAS
1764
AIA/NAS NAS
1765
AIA/NAS NAS
1766
AIA/NAS NAS
1767
AIA/NAS NAS
1768
AIA/NAS NAS
1769
AIA/NAS NAS
1770
AIA/NAS NAS
1771

AIA/NAS NAS
1772
AIA/NAS NAS
1773
AIA/NAS NAS
1774
AIA/NAS NAS
1775
AIA/NAS NAS
1776
AIA/NAS NAS
1777
AIA/NAS NAS
1778
AIA/NAS NAS
1779
AIA/NAS NAS
1780
AIA/NAS NAS
1781
AIA/NAS NAS
1782
AIA/NAS NAS
1783
AIA/NAS NAS
1784
AIA/NAS NAS
1785
AIA/NAS NAS
1787
AIA/NAS NAS
1789
AIA/NAS NAS
1790
AIA/NAS NAS
1791
AIA/NAS NAS
1792
AIA/NAS NAS
1793
AIA/NAS NAS
1794
AIA/NAS NAS
1795

AIA/NAS NAS
1801
AIA/NAS NAS
1802
AIA/NAS NAS
1803
AIA/NAS NAS
1804
AIA/NAS NAS
1805
AIA/NAS NAS
1829
AIA/NAS NAS
1830
AIA/NAS NAS
1831
AIA/NAS NAS
1832
AIA/NAS NAS
1833
AIA/NAS NAS
1834
AIA/NAS NAS
1835
AIA/NAS NAS
1836
AIA/NAS NAS
1837
AIA/NAS NAS
1841
AIA/NAS NAS
1842
AIA/NAS NAS
1843
AIA/NAS NAS
1844
AIA/NAS NAS
1845
AIA/NAS NAS
1846
AIA/NAS NAS
1847
AIA/NAS NAS
1848

AIA/NAS NAS
1849
AIA/NAS NAS
1850
AIA/NAS NAS
1851
AIA/NAS NAS
1852
AIA/NAS NAS
1853
AIA/NAS NAS
1854
AIA/NAS NAS
1860
AIA/NAS NAS
1861
AIA/NAS NAS
1862
AIA/NAS NAS
1863
AIA/NAS NAS
1870
AIA/NAS NAS
1871
AIA/NAS NAS
1872
AIA/NAS NAS
1873
AIA/NAS NAS
1900
AIA/NAS NAS
1919
AIA/NAS NAS
1921
AIA/NAS NAS
1922
AIA/NAS NAS
1923
AIA/NAS NAS
1925
AIA/NAS NAS
1972
AIA/NAS NAS
1973

AIA/NAS NAS
1974
AIA/NAS NAS
1975
AIA/NAS NAS
1976
AIA/NAS NAS
1977
AIA/NAS NAS
1978
AIA/NAS NAS
1979
AIA/NAS NAS
1980
AIA/NAS NAS
1982
AIA/NAS NAS
1983
AIA/NAS NAS
1984
AIA/NAS NAS
1985
AIA/NAS NAS
1986
AIA/NAS NAS
1987
AIA/NAS NAS
1988
AIA/NAS NAS
1989
AIA/NAS NAS
1990
AIA/NAS NAS
1992
AIA/NAS NAS
1993
AIA/NAS NAS
1994
AIA/NAS NAS
1995
AIA/NAS NAS
1996
AIA/NAS NAS
1997

AIA/NAS NAS
1998
AIA/NAS NAS
1999
AIA/NAS NAS
2000
AIA/NAS NAS
2005
AIA/NAS NAS
2006
AIA/NAS NAS
2008
AIA/NAS NAS
2010
AIA/NAS NAS
2012
AIA/NAS NAS
2013
AIA/NAS NAS
2014
AIA/NAS NAS
2015
AIA/NAS NAS
2016
AIA/NAS NAS
2018
AIA/NAS NAS
2020
AIA/NAS NAS
2022
AIA/NAS NAS
2025
AIA/NAS NAS
2026
AIA/NAS NAS
2028
AIA/NAS NAS
2030
AIA/NAS NAS
2032
AIA/NAS NAS
2035
AIA/NAS NAS
2036

AIA/NAS NAS
2038
AIA/NAS NAS
2040
AIA/NAS NAS
2042
AIA/NAS NAS
2045
AIA/NAS NAS
2046
AIA/NAS NAS
2048
AIA/NAS NAS
2050
AIA/NAS NAS
2052
AIA/NAS NAS
2055
AIA/NAS NAS
2056
AIA/NAS NAS
2058
AIA/NAS NAS
2060
AIA/NAS NAS
2062
AIA/NAS NAS
2065
AIA/NAS NAS
2066
AIA/NAS NAS
2068
AIA/NAS NAS
2070
AIA/NAS NAS
2072
AIA/NAS NAS
2105
AIA/NAS NAS
2106
AIA/NAS NAS
2108
AIA/NAS NAS
2110

AIA/NAS NAS
2112
AIA/NAS NAS
2115
AIA/NAS NAS
2116
AIA/NAS NAS
2118
AIA/NAS NAS
2120
AIA/NAS NAS
2122
AIA/NAS NAS
2125
AIA/NAS NAS
2126
AIA/NAS NAS
2128
AIA/NAS NAS
2130
AIA/NAS NAS
2132
AIA/NAS NAS
2205
AIA/NAS NAS
2206
AIA/NAS NAS
2208
AIA/NAS NAS
2210
AIA/NAS NAS
2212
AIA/NAS NAS
2306
AIA/NAS NAS
2308
AIA/NAS NAS
2310
AIA/NAS NAS
2312
AIA/NAS NAS
2406
AIA/NAS NAS
2408

AIA/NAS NAS
2410
AIA/NAS NAS
2412
AIA/NAS NAS
2506
AIA/NAS NAS
2508
AIA/NAS NAS
2510
AIA/NAS NAS
2512
AIA/NAS NAS
2605
AIA/NAS NAS
2606
AIA/NAS NAS
2608
AIA/NAS NAS
2610
AIA/NAS NAS
2612
AIA/NAS NAS
2705
AIA/NAS NAS
2706
AIA/NAS NAS
2708
AIA/NAS NAS
2710
AIA/NAS NAS
2712
AIA/NAS NAS
2803
AIA/NAS NAS
2804
AIA/NAS NAS
2805
AIA/NAS NAS
2806
AIA/NAS NAS
2807
AIA/NAS NAS
2808

AIA/NAS NAS
2809
AIA/NAS NAS
2810
AIA/NAS NAS
2813
AIA/NAS NAS
2814
AIA/NAS NAS
2815
AIA/NAS NAS
2816
AIA/NAS NAS
2817
AIA/NAS NAS
2818
AIA/NAS NAS
2819
AIA/NAS NAS
2820
AIA/NAS NAS
2822
AIA/NAS NAS
2824
AIA/NAS NAS
2826
AIA/NAS NAS
2828
AIA/NAS NAS
2830
AIA/NAS NAS
2832
AIA/NAS NAS
2833
AIA/NAS NAS
2834
AIA/NAS NAS
2835
AIA/NAS NAS
2836
AIA/NAS NAS
2837
AIA/NAS NAS
2838

AIA/NAS NAS
2839
AIA/NAS NAS
2840
AIA/NAS NAS
2842
AIA/NAS NAS
2843
AIA/NAS NAS
2844
AIA/NAS NAS
2845
AIA/NAS NAS
2846
AIA/NAS NAS
2847
AIA/NAS NAS
2848
AIA/NAS NAS
2849
AIA/NAS NAS
2850
AIA/NAS NAS
2852
AIA/NAS NAS
2853
AIA/NAS NAS
2854
AIA/NAS NAS
2855
AIA/NAS NAS
2856
AIA/NAS NAS
2857
AIA/NAS NAS
2858
AIA/NAS NAS
2859
AIA/NAS NAS
2860
AIA/NAS
NASM3036
AIA/NAS NAS
3103

AIA/NAS NAS
3104
AIA/NAS NAS
3105
AIA/NAS NAS
3106
AIA/NAS NAS
3108
AIA/NAS NAS
3110
AIA/NAS NAS
3203
AIA/NAS NAS
3204
AIA/NAS NAS
3205
AIA/NAS NAS
3206
AIA/NAS NAS
3208
AIA/NAS NAS
3210
AIA/NAS
NASM3212
AIA/NAS
NASM3213
AIA/NAS
NASM3214
AIA/NAS NAS
3303
AIA/NAS NAS
3304
AIA/NAS NAS
3305
AIA/NAS
NASM3369
AIA/NAS NAS
3417
AIA/NAS NAS
3426
AIA/NAS
NASM3498
AIA/NAS NAS
4006

AIA/NAS NAS
4121
AIA/NAS NAS
4123
AIA/NAS NAS
4450
AIA/NAS NAS
4452
AIA/NAS NAS
4458
AIA/NAS NAS
4466
AIA/NAS
NASM5591
AIA/NAS
NASM5673
AIA/NAS
NASM5674
AIA/NAS NAS
6203
AIA/NAS NAS
6204
AIA/NAS NAS
6205
AIA/NAS NAS
6206
AIA/NAS NAS
6207
AIA/NAS NAS
6208
AIA/NAS NAS
6209
AIA/NAS NAS
6210
AIA/NAS NAS
6212
AIA/NAS NAS
6214
AIA/NAS NAS
6216
AIA/NAS NAS
6218
AIA/NAS NAS
6220

AIA/NAS NAS
6303
AIA/NAS NAS
6304
AIA/NAS NAS
6305
AIA/NAS NAS
6306
AIA/NAS NAS
6307
AIA/NAS NAS
6308
AIA/NAS NAS
6309
AIA/NAS NAS
6310
AIA/NAS NAS
6312
AIA/NAS NAS
6314
AIA/NAS NAS
6316
AIA/NAS NAS
6318
AIA/NAS NAS
6320
AIA/NAS NAS
6403
AIA/NAS NAS
6603
AIA/NAS NAS
6604
AIA/NAS NAS
6605
AIA/NAS NAS
6606
AIA/NAS NAS
6607
AIA/NAS NAS
6404
AIA/NAS NAS
6405
AIA/NAS NAS
6406

AIA/NAS NAS
6407
AIA/NAS NAS
6408
AIA/NAS NAS
6409
AIA/NAS NAS
6410
AIA/NAS NAS
6412
AIA/NAS NAS
6414
AIA/NAS NAS
6416
AIA/NAS NAS
6418
AIA/NAS NAS
6420
AIA/NAS NAS
6608
AIA/NAS NAS
6609
AIA/NAS NAS
6610
AIA/NAS NAS
6612
AIA/NAS NAS
6614
AIA/NAS NAS
6616
AIA/NAS NAS
6618
AIA/NAS NAS
6620
AIA/NAS NAS
6703
AIA/NAS NAS
6704
AIA/NAS NAS
6705
AIA/NAS NAS
6706
AIA/NAS NAS
6707

AIA/NAS NAS
6708
AIA/NAS NAS
6709
AIA/NAS NAS
6710
AIA/NAS NAS
6712
AIA/NAS NAS
6714
AIA/NAS NAS
6716
AIA/NAS NAS
6718
AIA/NAS NAS
6720
AIA/NAS NAS
6803
AIA/NAS NAS
6804
AIA/NAS NAS
6805
AIA/NAS NAS
6806
AIA/NAS NAS
6807
AIA/NAS NAS
6808
AIA/NAS NAS
6809
AIA/NAS NAS
6810
AIA/NAS NAS
6812
AIA/NAS
NASM6812
AIA/NAS NAS
6814
AIA/NAS NAS
6816
AIA/NAS NAS
6818
AIA/NAS
NASM6818

AIA/NAS NAS
6820
AIA/NAS NAS
6913
AIA/NAS NAS
6914
AIA/NAS NAS
6915
AIA/NAS NAS
6916
AIA/NAS NAS
6918
AIA/NAS NAS
6920
AIA/NAS NAS
6922
AIA/NAS NAS
6925
AIA/NAS NAS
6926
AIA/NAS NAS
6928
AIA/NAS NAS
6930
AIA/NAS NAS
6932
AIA/NAS NAS
6935
AIA/NAS NAS
6936
AIA/NAS NAS
6938
AIA/NAS NAS
6940
AIA/NAS NAS
6942
AIA/NAS NAS
6946
AIA/NAS NAS
6948
AIA/NAS NAS
6950
AIA/NAS NAS
6952

AIA/NAS NAS
6955
AIA/NAS NAS
6956
AIA/NAS NAS
6958
AIA/NAS NAS
6960
AIA/NAS NAS
6962
AIA/NAS NAS
6965
AIA/NAS NAS
6966
AIA/NAS NAS
6968
AIA/NAS NAS
6970
AIA/NAS NAS
6972
AIA/NAS NAS
6974
AIA/NAS NAS
6975
AIA/NAS NAS
6976
AIA/NAS NAS
6978
AIA/NAS NAS
6980
AIA/NAS NAS
6982
AIA/NAS NAS
6984
AIA/NAS NAS
6985
AIA/NAS NAS
6986
AIA/NAS NAS
6988
AIA/NAS NAS
6990
AIA/NAS NAS
6992

AIA/NAS NAS
7004
AIA/NAS NAS
7005
AIA/NAS NAS
7006
AIA/NAS NAS
7008
AIA/NAS NAS
7010
AIA/NAS NAS
7012
AIA/NAS NAS
7014
AIA/NAS NAS
7015
AIA/NAS NAS
7016
AIA/NAS NAS
7018
AIA/NAS NAS
7020
AIA/NAS NAS
7022
AIA/NAS NAS
7024
AIA/NAS NAS
7025
AIA/NAS NAS
7026
AIA/NAS NAS
7028
AIA/NAS NAS
7030
AIA/NAS NAS
7032
AIA/NAS NAS
7034
AIA/NAS NAS
7035
AIA/NAS NAS
7036
AIA/NAS NAS
7038

AIA/NAS NAS
7040
AIA/NAS NAS
7042
AIA/NAS NAS
7100
AIA/NAS NAS
7101
AIA/NAS NAS
7103
AIA/NAS NAS
7104
AIA/NAS NAS
7105
AIA/NAS NAS
7106
AIA/NAS NAS
7107
AIA/NAS NAS
7108
AIA/NAS NAS
7109
AIA/NAS NAS
7110
AIA/NAS NAS
7112
AIA/NAS NAS
7114
AIA/NAS NAS
7116
AIA/NAS NAS
7203
AIA/NAS NAS
7204
AIA/NAS NAS
7205
AIA/NAS NAS
7206
AIA/NAS NAS
7207
AIA/NAS NAS
7208
AIA/NAS NAS
7209

AIA/NAS NAS
7210
AIA/NAS NAS
7212
AIA/NAS NAS
7214
AIA/NAS NAS
7216
AIA/NAS NAS
7303
AIA/NAS NAS
7304
AIA/NAS NAS
7305
AIA/NAS NAS
7306
AIA/NAS NAS
7307
AIA/NAS NAS
7308
AIA/NAS NAS
7309
AIA/NAS NAS
7310
AIA/NAS NAS
7312
AIA/NAS NAS
7314
AIA/NAS NAS
7316
AIA/NAS NAS
7400
AIA/NAS NAS
7401
AIA/NAS NAS
7402
AIA/NAS NAS
7403
AIA/NAS NAS
7404
AIA/NAS NAS
7405
AIA/NAS NAS
7406

AIA/NAS NAS
7407
AIA/NAS NAS
7408
AIA/NAS NAS
7409
AIA/NAS NAS
7410
AIA/NAS NAS
7412
AIA/NAS NAS
7414
AIA/NAS NAS
7416
AIA/NAS NAS
7500
AIA/NAS NAS
7501
AIA/NAS NAS
7502
AIA/NAS NAS
7503
AIA/NAS NAS
7504
AIA/NAS NAS
7505
AIA/NAS NAS
7506
AIA/NAS NAS
7507
AIA/NAS NAS
7508
AIA/NAS NAS
7509
AIA/NAS NAS
7510
AIA/NAS NAS
7512
AIA/NAS NAS
7514
AIA/NAS NAS
7516
AIA/NAS NAS
7600

AIA/NAS NAS
7601
AIA/NAS NAS
7602
AIA/NAS NAS
7603
AIA/NAS NAS
7604
AIA/NAS NAS
7605
AIA/NAS NAS
7606
AIA/NAS NAS
7607
AIA/NAS NAS
7608
AIA/NAS NAS
7609
AIA/NAS NAS
7610
AIA/NAS NAS
7612
AIA/NAS NAS
7614
AIA/NAS NAS
7616
AIA/NAS NAS
7700
AIA/NAS NAS
7701
AIA/NAS NAS
7702
AIA/NAS NAS
7703
AIA/NAS NAS
7704
AIA/NAS NAS
7705
AIA/NAS NAS
7706
AIA/NAS NAS
7800
AIA/NAS NAS
7801

AIA/NAS NAS
7802
AIA/NAS NAS
7803
AIA/NAS NAS
7804
AIA/NAS NAS
7805
AIA/NAS NAS
7806
AIA/NAS
NASM7838
AIA/NAS
NASM7839
AIA/NAS
NASM7873
AIA/NAS
NASM7874
AIA/NAS NAS
7900
AIA/NAS NAS
7901
AIA/NAS NAS
7902
AIA/NAS NAS
7903
AIA/NAS NAS
7904
AIA/NAS NAS
7905
AIA/NAS NAS
7906
AIA/NAS NAS
8000
AIA/NAS NAS
8001
AIA/NAS NAS
8002
AIA/NAS NAS
8003
AIA/NAS NAS
8004
AIA/NAS NAS
8005

AIA/NAS NAS
8006
AIA/NAS NAS
8100
AIA/NAS NAS
8101
AIA/NAS NAS
8102
AIA/NAS NAS
8103
AIA/NAS NAS
8104
AIA/NAS NAS
8105
AIA/NAS NAS
8106
AIA/NAS NAS
8200
AIA/NAS NAS
8201
AIA/NAS NAS
8202
AIA/NAS NAS
8203
AIA/NAS NAS
8204
AIA/NAS NAS
8205
AIA/NAS NAS
8206
AIA/NAS NAS
8302
AIA/NAS NAS
8303
AIA/NAS NAS
8304
AIA/NAS NAS
8602
AIA/NAS NAS
8603
AIA/NAS NAS
8604
AIA/NAS NAS
8605

AIA/NAS NAS
8606
AIA/NAS NAS
8607
AIA/NAS NAS
8608
AIA/NAS NAS
8609
AIA/NAS NAS
8610
AIA/NAS NAS
8612
AIA/NAS NAS
8614
AIA/NAS NAS
8616
AIA/NAS NAS
8802
AIA/NAS NAS
8803
AIA/NAS NAS
8804
AIA/NAS NAS
8805
AIA/NAS NAS
8806
AIA/NAS NAS
8807
AIA/NAS NAS
8808
AIA/NAS NAS
8809
AIA/NAS NAS
8810
AIA/NAS NAS
8812
AIA/NAS NAS
8814
AIA/NAS
NASM8814
AIA/NAS NAS
8816
AIA/NAS
NASM8831

AIA/NAS
NASM8846
AIA/NAS
NASM8906
AIA/NAS
NASM8906/2
AIA/NAS
NASM8907
AIA/NAS
NASM8922
AIA/NAS
NASM8922/1
AIA/NAS
NASM8975
AIA/NAS
NASM8975/1
AIA/NAS
NASM8975/2
AIA/NAS
NASM8975/3
AIA/NAS
NASM8975/4
AIA/NAS
NASM8975/5
AIA/NAS
NASM8975/6
AIA/NAS
NASM8975/7
AIA/NAS
NASM8984
AIA/NAS
NASM8985
AIA/NAS NAS
9001
AIA/NAS NAS
9002
AIA/NAS NAS
9003
AIA/NAS NAS
9004
AIA/NAS NAS
9005
AIA/NAS NAS
9006

AIA/NAS
NASM9006
AIA/NAS NAS
9101
AIA/NAS NAS
9102
AIA/NAS NAS
9103
AIA/NAS NAS
9104
AIA/NAS NAS
9105
AIA/NAS NAS
9106
AIA/NAS NAS
9201
AIA/NAS NAS
9202
AIA/NAS NAS
9203
AIA/NAS NAS
9204
AIA/NAS NAS
9205
AIA/NAS NAS
9206
AIA/NAS NAS
9301
AIA/NAS NAS
9302
AIA/NAS NAS
9303
AIA/NAS NAS
9304
AIA/NAS NAS
9305
AIA/NAS NAS
9306
AIA/NAS NAS
9307
AIA/NAS NAS
9308
AIA/NAS NAS
9309

AIA/NAS NAS
9310
AIA/NAS NAS
9311
AIA/NAS NAS
9312
AIA/NAS
NASM10971
AIA/NAS
NASM14144
AIA/NAS
NASM14145
AIA/NAS
NASM14151
AIA/NAS
NASM14155
AIA/NAS
NASM14156
AIA/NAS
NASM14157
AIA/NAS
NASM14164
AIA/NAS
NASM14177
AIA/NAS
NASM14179
AIA/NAS
NASM14181
AIA/NAS
NASM14182
AIA/NAS
NASM14183
AIA/NAS
NASM14191
AIA/NAS
NASM14198
AIA/NAS
NASM14200
AIA/NAS
NASM14210
AIA/NAS
NASM14213
AIA/NAS
NASM14214

AIA/NAS
NASM14218
AIA/NAS
NASM14219
AIA/NAS
NASM14222
AIA/NAS
NAM14290
AIA/NAS
NASM14490
AIA/NAS
NASM14491
AIA/NAS
NASM14493
AIA/NAS
NASM14531
AIA/NAS
NASM15795
AIA/NAS
NASM15981
AIA/NAS
NASM16187
AIA/NAS
NASM16205
AIA/NAS
NASM16206
AIA/NAS
NASM16208
AIA/NAS
NASM16218
AIA/NAS
NASM16228
AIA/NAS
NASM16491
AIA/NAS
NASM16491/1
AIA/NAS
NASM16491/2
AIA/NAS
NASM16491/3

AIA/NAS
NASM16535
AIA/NAS
NASM16536
AIA/NAS
NASM16555
AIA/NAS
NASM16556
AIA/NAS
NASM16562
AIA/NAS
NASM16610
AIA/NAS
NASM16995
AIA/NAS
NASM16996
AIA/NAS
NASM17731
AIA/NAS
NASM17732
AIA/NAS
NASM17828
AIA/NAS
NASM17829
AIA/NAS
NASM17830
AIA/NAS
NASM17855
AIA/NAS
NASM17984
AIA/NAS
NASM17985
AIA/NAS
NASM17986
AIA/NAS
NASM17987
AIA/NAS
NASM17988
AIA/NAS
NASM17989
AIA/NAS
NASM17990
AIA/NAS
NASM18063

AIA/NAS
NASM18064
AIA/NAS
NASM18067
AIA/NAS
NASM20002
AIA/NAS
NASM20004
AIA/NAS
NASM20005
AIA/NAS
NASM20006
AIA/NAS
NASM20007
AIA/NAS
NASM20008
AIA/NAS
NASM20009
AIA/NAS
NASM20010
AIA/NAS
NASM20012
AIA/NAS
NASM20014
AIA/NAS
NASM20016
AIA/NAS
NASM20017
AIA/NAS
NASM20018
AIA/NAS
NASM20020
AIA/NAS
NASM20022
AIA/NAS
NASM20024
AIA/NAS
NASM20033
AIA/NAS
NASM20034
AIA/NAS
NASM20035
AIA/NAS
NASM20036

AIA/NAS
NASM20037
AIA/NAS
NASM20038
AIA/NAS
NASM20039
AIA/NAS
NASM20040
AIA/NAS
NASM20042
AIA/NAS
NASM20044
AIA/NAS
NASM20045
AIA/NAS
NASM20065
AIA/NAS
NASM20066
AIA/NAS
NASM20067
AIA/NAS
NASM20068
AIA/NAS
NASM20073
AIA/NAS
NASM20074
AIA/NAS
NASM20230
AIA/NAS
NASM20392
AIA/NAS
NASM20426
AIA/NAS
NASM20427
AIA/NAS
NASM20470
AIA/NAS
NASM20501
AIA/NAS
NASM20600
AIA/NAS
NASM20601
AIA/NAS
NASM20604

AIA/NAS
NASM20605
AIA/NAS
NASM20613
AIA/NAS
NASM20615
AIA/NAS
NASM20652
AIA/NAS
NASM20652/1
AIA/NAS
NASM20700
AIA/NAS
NASM20995
AIA/NAS
NASM21025
AIA/NAS
NASM21042
AIA/NAS
NASM21043
AIA/NAS
NASM21044
AIA/NAS
NASM21045
AIA/NAS
NASM21046
AIA/NAS
NASM21048
AIA/NAS
NASM21049
AIA/NAS
NASM21050
AIA/NAS
NASM21051
AIA/NAS
NASM21052
AIA/NAS
NASM21053
AIA/NAS
NASM21054
AIA/NAS
NASM21055

AIA/NAS
NASM21056
AIA/NAS
NASM21057
AIA/NAS
NASM21058
AIA/NAS
NASM21059
AIA/NAS
NASM21060
AIA/NAS
NASM21061
AIA/NAS
NASM21063
AIA/NAS
NASM21064
AIA/NAS
NASM21065
AIA/NAS
NASM21066
AIA/NAS
NASM21067
AIA/NAS
NASM21068
AIA/NAS
NASM21069
AIA/NAS
NASM21070
AIA/NAS
NASM21071
AIA/NAS
NASM21072
AIA/NAS
NASM21073
AIA/NAS
NASM21074
AIA/NAS
NASM21075
AIA/NAS
NASM21076
AIA/NAS
NASM21077
AIA/NAS
NASM21078

AIA/NAS
NASM21079
AIA/NAS
NASM21080
AIA/NAS
NASM21081
AIA/NAS
NASM21082
AIA/NAS
NASM21083
AIA/NAS
NASM21084
AIA/NAS
NASM21085
AIA/NAS
NASM21086
AIA/NAS
NASM21087
AIA/NAS
NASM21093
AIA/NAS
NASM21094
AIA/NAS
NASM21095
AIA/NAS
NASM21096
AIA/NAS
NASM21097
AIA/NAS
NASM21125
AIA/NAS
NASM21130
AIA/NAS
NASM21132
AIA/NAS
NASM21133
AIA/NAS
NASM21134
AIA/NAS
NASM21140
AIA/NAS
NASM21143

AIA/NAS
NASM21143/1
AIA/NAS
NASM21143/2
AIA/NAS
NASM21207
AIA/NAS
NASM21209
AIA/NAS
NASM21224
AIA/NAS
NASM21225
AIA/NAS
NASM21244
AIA/NAS
NASM21245
AIA/NAS
NASM21250
AIA/NAS
NASM21262
AIA/NAS
NASM21266
AIA/NAS
NASM21287
AIA/NAS
NASM21295
AIA/NAS
NASM21296
AIA/NAS
NASM21297
AIA/NAS
NASM21318
AIA/NAS
NASM21322
AIA/NAS
NASM21323
AIA/NAS
NASM21325
AIA/NAS
NASM21326
AIA/NAS
NASM21327

AIA/NAS
NASM21332
AIA/NAS
NASM21333
AIA/NAS
NASM21334
AIA/NAS
NASM21392
AIA/NAS
NASM21472
AIA/NAS
NASM22529
AIA/NAS
NASM22529/1
AIA/NAS
NASM22529/2
AIA/NAS
NASM22978
AIA/NAS
NASM23460
AIA/NAS
NASM23964
AIA/NAS
NASM24066/2
AIA/NAS
NASM24066/3
AIA/NAS
NASM24066/4
AIA/NAS
NASM24373
AIA/NAS
NASM24374
AIA/NAS
NASM24625
AIA/NAS
NASM24627
AIA/NAS
NASM24628

AIA/NAS
NASM24629
AIA/NAS
NASM24630
AIA/NAS
NASM24634
AIA/NAS
NASM24661
AIA/NAS
NASM24665
AIA/NAS
NASM24667
AIA/NAS
NASM24671
AIA/NAS
NASM24673
AIA/NAS
NASM24674
AIA/NAS
NASM24677
AIA/NAS
NASM24678
AIA/NAS
NASM24692
AIA/NAS
NASM24693
AIA/NAS
NASM24694
AIA/NAS
NASM25027
AIA/NAS
NASM25087
AIA/NAS
NASM25420
AIA/NAS
NASM25440
AIA/NAS
NASM27039
AIA/NAS
NASM27120
AIA/NAS
NASM27384
AIA/NAS
NASM27545

AIA/NAS
NASM27576
AIA/NAS
NASM27577
AIA/NAS
NASM27953
AIA/NAS
NASM27954
AIA/NAS
NASM27975
AIA/NAS
NASM27980
AIA/NAS
NASM27981
AIA/NAS
NASM27983
AIA/NAS
NASM27984
AIA/NAS
NASM27986
AIA/NAS
NASM28042
AIA/NAS
NASM33540
AIA/NAS
NASM33547
AIA/NAS
NASM33557
AIA/NAS
NASM33588
AIA/NAS
NASM33522
AIA/NAS
NASM33602
AIA/NAS
NASM33737
AIA/NAS
NASM33749
AIA/NAS
NASM33750
AIA/NAS
NASM33781
AIA/NAS
NASM35140

AIA/NAS
NASM35190
AIA/NAS
NASM35191
AIA/NAS
NASM35198
AIA/NAS
NASM35199
AIA/NAS
NASM35202
AIA/NAS
NASM35206
AIA/NAS
NASM35207
AIA/NAS
NASM35214
AIA/NAS
NASM35215
AIA/NAS
NASM35273
AIA/NAS
NASM35274
AIA/NAS
NASM35275
AIA/NAS
NASM35276
AIA/NAS
NASM35307
AIA/NAS
NASM35308
AIA/NAS
NASM35671
AIA/NAS
NASM35672
AIA/NAS
NASM35674
AIA/NAS
NASM35675
AIA/NAS
NASM35677
AIA/NAS
NASM35678
AIA/NAS
NASM35751

AIA/NAS
NASM35756
AIA/NAS
NASM35791
AIA/NAS
NASM35792
AIA/NAS
NASM35793
AIA/NAS
NASM35812
AIA/NAS
NASM39086
AIA/NAS
NASM39087
AIA/NAS
NASM43770/1
AIA/NAS
NASM43770/2
AIA/NAS
NASM43770/3
AIA/NAS
NASM43770/4
AIA/NAS
NASM43770/5
AIA/NAS
NASM43770/6
AIA/NAS
NASM43770/7
AIA/NAS
NASM43770/8
AIA/NAS
NASM43770/9
AIA/NAS
NASM43770/1
0

AIA/NAS
NASM43770/1
1
AIA/NAS
NASM43770/1
2
AIA/NAS
NASM43770/1
3
AIA/NAS
NASM43770/1
4
AIA/NAS
NASM45595
AIA/NAS
NASM45595/1
AIA/NAS
NASM45595/2
AIA/NAS
NASM45595/3
AIA/NAS
NASM45595/4
AIA/NAS
NASM45595/5
AIA/NAS
NASM45595/6
AIA/NAS
NASM45595/7
AIA/NAS
NASM45595/8
AIA/NAS
NASM45908
AIA/NAS
NASM45909
AIA/NAS
NASM45915

AIA/NAS
NASM45938
AIA/NAS
NASM45938/2
AIA/NAS
NASM45938/3
AIA/NAS
NASM45938/4
AIA/NAS
NASM45938/5
AIA/NAS
NASM45938/6
AIA/NAS
NASM45938/7
AIA/NAS
NASM45938/8
AIA/NAS
NASM45938/9
AIA/NAS
NASM45938/1
0
AIA/NAS
NASM45938/1
1
AIA/NAS
NASM45938/1
2
AIA/NAS
NASM45938/1
3
AIA/NAS
NASM45938/1
4
AIA/NAS
NASM47195

AIA/NAS
NASM47196
AIA/NAS
NASM51021
AIA/NAS
NASM51023
AIA/NAS
NASM51029
AIA/NAS
NASM51031
AIA/NAS
NASM51038
AIA/NAS
NASM51045
AIA/NAS
NASM51047
AIA/NAS
NASM51096
AIA/NAS
NASM51105
AIA/NAS
NASM51109
AIA/NAS
NASM51110
AIA/NAS
NASM51400
AIA/NAS
NAM51417
AIA/NAS
NASM51417
AIA/NAS
NASM51474
AIA/NAS
NASM51575
AIA/NAS
NASM51576
AIA/NAS
NASM51833
AIA/NAS
NASM51834
AIA/NAS
NASM51838
AIA/NAS
NASM51850

AIA/NAS
NASM51863
AIA/NAS
NASM51864
AIA/NAS
NASM51871
AIA/NAS
NASM51896
AIA/NAS
NASM51923
AIA/NAS
NASM51932
AIA/NAS
NASM51956
AIA/NAS
NASM51958
AIA/NAS
NASM51959
AIA/NAS
NASM51963
AIA/NAS
NASM51964
AIA/NAS
NASM51965
AIA/NAS
NASM51966
AIA/NAS
NASM51973
AIA/NAS
NASM51974
AIA/NAS
NASM51975
AIA/NAS
NASM51976
AIA/NAS
NASM51977
AIA/NAS
NASM51981
AIA/NAS
NASM51982
AIA/NAS
NASM51987

AIA/NAS
NASM63540/1
AIA/NAS
NASM63540/2
AIA/NAS
NASM63540/3
AIA/NAS
NASM63540/4
AIA/NAS
NASM63540/5
AIA/NAS
NASM63540/7
AIA/NAS
NASM81177
AIA/NAS
NASM81177/1
AIA/NAS
NASM81177/2
AIA/NAS
NASM81177/3
AIA/NAS
NASM82496
AIA/NAS
NASM83050
AIA/NAS
NASM83459
AIA/NAS
NASM83459/1
AIA/NAS
NASM83459/2
AIA/NAS
NASM83459/3

AIA/NAS
NASM85353
AIA/NAS
NASM85353/1
AIA/NAS
NASM85353/2
AIA/NAS
NASM85449
AIA/NAS
NASM85449/1
AIA/NAS
NASM85449/2
AIA/NAS
NASM85449/3
AIA/NAS
NASM85449/4
AIA/NAS
NASM85604
AIA/NAS
NASM85643
AIA/NAS
NASM85643/1
AIA/NAS
NASM85643/2
AIA/NAS
NASM85643/3
AIA/NAS
NASM85643/4
AIA/NAS
NASM85643/5
AIA/NAS
NASM85730

AIA/NAS
NASM85730/1
AIA/NAS
NASM90353
AIA/NAS
NASM90354
AIA/NAS
NASM90415
AIA/NAS
NASM90725
AIA/NAS
NASM90726
AIA/NAS
NASM122076
AIA/NAS
NASM122077
AIA/NAS
NASM122078
AIA/NAS
NASM122079
AIA/NAS
NASM122080
AIA/NAS
NASM122081
AIA/NAS
NASM122082
AIA/NAS
NASM122083
AIA/NAS
NASM122084
AIA/NAS
NASM122085
AIA/NAS
NASM122086
AIA/NAS
NASM122087
AIA/NAS
NASM122088
AIA/NAS
NASM122089
AIA/NAS
NASM122090

AIA/NAS
NASM122091
AIA/NAS
NASM122092
AIA/NAS
NASM122093
AIA/NAS
NASM122094
AIA/NAS
NASM122095
AIA/NAS
NASM122096
AIA/NAS
NASM122097
AIA/NAS
NASM122098
AIA/NAS
NASM122099
AIA/NAS
NASM122100
AIA/NAS
NASM122101
AIA/NAS
NASM122102
AIA/NAS
NASM122103
AIA/NAS
NASM122104
AIA/NAS
NASM122105
AIA/NAS
NASM122106
AIA/NAS
NASM122107
AIA/NAS
NASM122108
AIA/NAS
NASM122109
AIA/NAS
NASM122110
AIA/NAS
NASM122111
AIA/NAS
NASM122112

AIA/NAS
NASM122113
AIA/NAS
NASM122114
AIA/NAS
NASM122115
AIA/NAS
NASM122116
AIA/NAS
NASM122117
AIA/NAS
NASM122118
AIA/NAS
NASM122119
AIA/NAS
NASM122120
AIA/NAS
NASM122121
AIA/NAS
NASM122122
AIA/NAS
NASM122123
AIA/NAS
NASM122124
AIA/NAS
NASM122125
AIA/NAS
NASM122126
AIA/NAS
NASM122127
AIA/NAS
NASM122128
AIA/NAS
NASM122129
AIA/NAS
NASM122130
AIA/NAS
NASM122131
AIA/NAS
NASM122132
AIA/NAS
NASM122133
AIA/NAS
NASM122134

AIA/NAS
NASM122135
AIA/NAS
NASM122155
AIA/NAS
NASM122156
AIA/NAS
NASM122157
AIA/NAS
NASM122158
AIA/NAS
NASM122159
AIA/NAS
NASM122160
AIA/NAS
NASM122161
AIA/NAS
NASM122162
AIA/NAS
NASM122163
AIA/NAS
NASM122164
AIA/NAS
NASM122165
AIA/NAS
NASM122166
AIA/NAS
NASM122167
AIA/NAS
NASM122168
AIA/NAS
NASM122169
AIA/NAS
NASM122170
AIA/NAS
NASM122171
AIA/NAS
NASM122172
AIA/NAS
NASM122173
AIA/NAS
NASM122174
AIA/NAS
NASM122175

AIA/NAS
NASM122195
AIA/NAS
NASM122196
AIA/NAS
NASM122197
AIA/NAS
NASM122198
AIA/NAS
NASM122199
AIA/NAS
NASM122200
AIA/NAS
NASM122201
AIA/NAS
NASM122202
AIA/NAS
NASM122203
AIA/NAS
NASM122204
AIA/NAS
NASM122205
AIA/NAS
NASM122206
AIA/NAS
NASM122207
AIA/NAS
NASM122208
AIA/NAS
NASM122209
AIA/NAS
NASM122210
AIA/NAS
NASM122211
AIA/NAS
NASM122212
AIA/NAS
NASM122213
AIA/NAS
NASM122214
AIA/NAS
NASM122215
AIA/NAS
NASM122235

AIA/NAS
NASM122236
AIA/NAS
NASM122237
AIA/NAS
NASM122238
AIA/NAS
NASM122239
AIA/NAS
NASM122240
AIA/NAS
NASM122241
AIA/NAS
NASM122242
AIA/NAS
NASM122243
AIA/NAS
NASM122244
AIA/NAS
NASM122245
AIA/NAS
NASM122246
AIA/NAS
NASM122247
AIA/NAS
NASM122248
AIA/NAS
NASM122249
AIA/NAS
NASM122250
AIA/NAS
NASM122251
AIA/NAS
NASM122252
AIA/NAS
NASM122253
AIA/NAS
NASM122254
AIA/NAS
NASM122255
AIA/NAS
NASM122256
AIA/NAS
NASM122257

AIA/NAS
NASM122258
AIA/NAS
NASM122259
AIA/NAS
NASM122260
AIA/NAS
NASM122261
AIA/NAS
NASM122262
AIA/NAS
NASM122263
AIA/NAS
NASM122264
AIA/NAS
NASM122265
AIA/NAS
NASM122266
AIA/NAS
NASM122267
AIA/NAS
NASM122268
AIA/NAS
NASM122269
AIA/NAS
NASM122270
AIA/NAS
NASM122271
AIA/NAS
NASM122272
AIA/NAS
NASM122273
AIA/NAS
NASM122274
AIA/NAS
NASM122275
AIA/NAS
NASM124651
AIA/NAS
NASM124653
AIA/NAS
NASM124654
AIA/NAS
NASM124655

AIA/NAS
NASM124656
AIA/NAS
NASM124657
AIA/NAS
NASM124658
AIA/NAS
NASM124659
AIA/NAS
NASM124660
AIA/NAS
NASM124661
AIA/NAS
NASM124662
AIA/NAS
NASM124663
AIA/NAS
NASM124664
AIA/NAS
NASM124666
AIA/NAS
NASM124667
AIA/NAS
NASM124668
AIA/NAS
NASM124669
AIA/NAS
NASM124670
AIA/NAS
NASM124671
AIA/NAS
NASM124691
AIA/NAS
NASM124693
AIA/NAS
NASM124694
AIA/NAS
NASM124695
AIA/NAS
NASM124696
AIA/NAS
NASM124697
AIA/NAS
NASM124698

AIA/NAS
NASM124699
AIA/NAS
NASM124700
AIA/NAS
NASM124701
AIA/NAS
NASM124702
AIA/NAS
NASM124703
AIA/NAS
NASM124704
AIA/NAS
NASM124706
AIA/NAS
NASM124707
AIA/NAS
NASM124708
AIA/NAS
NASM124709
AIA/NAS
NASM124710
AIA/NAS
NASM124711
AIA/NAS
NASM124731
AIA/NAS
NASM124733
AIA/NAS
NASM124734
AIA/NAS
NASM124735
AIA/NAS
NASM124736
AIA/NAS
NASM124737
AIA/NAS
NASM124738
AIA/NAS
NASM124739
AIA/NAS
NASM124740
AIA/NAS
NASM124741

AIA/NAS
NASM124742
AIA/NAS
NASM124743
AIA/NAS
NASM124746
AIA/NAS
NASM124747
AIA/NAS
NASM124748
AIA/NAS
NASM124749
AIA/NAS
NASM124750
AIA/NAS
NASM124751
AIA/NAS
NASM124771
AIA/NAS
NASM124773
AIA/NAS
NASM124774
AIA/NAS
NASM124775
AIA/NAS
NASM124776
AIA/NAS
NASM124777
AIA/NAS
NASM124778
AIA/NAS
NASM124779
AIA/NAS
NASM124780
AIA/NAS
NASM124781
AIA/NAS
NASM124782
AIA/NAS
NASM124783
AIA/NAS
NASM124784
AIA/NAS
NASM124786

AIA/NAS
NASM124787
AIA/NAS
NASM124788
AIA/NAS
NASM124789
AIA/NAS
NASM124790
AIA/NAS
NASM124791
AIA/NAS
NASM124811
AIA/NAS
NASM124812
AIA/NAS
NASM124813
AIA/NAS
NASM124814
AIA/NAS
NASM124815
AIA/NAS
NASM124816
AIA/NAS
NASM124817
AIA/NAS
NASM124818
AIA/NAS
NASM124819
AIA/NAS
NASM124820
AIA/NAS
NASM124821
AIA/NAS
NASM124822
AIA/NAS
NASM124823
AIA/NAS
NASM124824
AIA/NAS
NASM124825
AIA/NAS
NASM124826
AIA/NAS
NASM124827

AIA/NAS
NASM124828
AIA/NAS
NASM124829
AIA/NAS
NASM124830
AIA/NAS
NASM124831
AIA/NAS
NASM124832
AIA/NAS
NASM124833
AIA/NAS
NASM124834
AIA/NAS
NASM124835
AIA/NAS
NASM124836
AIA/NAS
NASM124837
AIA/NAS
NASM124838
AIA/NAS
NASM124839
AIA/NAS
NASM124840
AIA/NAS
NASM124841
AIA/NAS
NASM124842
AIA/NAS
NASM124843
AIA/NAS
NASM124844
AIA/NAS
NASM124845
AIA/NAS
NASM124846
AIA/NAS
NASM124847
AIA/NAS
NASM124848
AIA/NAS
NASM124849

AIA/NAS
NASM124850
AIA/NAS
NASM171401
AIA/NAS
NASM171402
AIA/NAS
NASM171403
AIA/NAS
NASM171404
AIA/NAS
NASM171405
AIA/NAS
NASM171406
AIA/NAS
NASM171407
AIA/NAS
NASM171408
AIA/NAS
NASM171409
AIA/NAS
NASM171410
AIA/NAS
NASM171411
AIA/NAS
NASM171412
AIA/NAS
NASM171413
AIA/NAS
NASM171414
AIA/NAS
NASM171415
AIA/NAS
NASM171416
AIA/NAS
NASM171417
AIA/NAS
NASM171418
AIA/NAS
NASM171419
AIA/NAS
NASM171420
AIA/NAS
NASM171421

AIA/NAS
NASM171422
AIA/NAS
NASM171423
AIA/NAS
NASM171424
AIA/NAS
NASM171425
AIA/NAS
NASM171426
AIA/NAS
NASM171427
AIA/NAS
NASM171428
AIA/NAS
NASM171429
AIA/NAS
NASM171430
AIA/NAS
NASM171431
AIA/NAS
NASM171432
AIA/NAS
NASM171433
AIA/NAS
NASM171434
AIA/NAS
NASM171435
AIA/NAS
NASM171436
AIA/NAS
NASM171437
AIA/NAS
NASM171438
AIA/NAS
NASM171439
AIA/NAS
NASM171440
AIA/NAS
NASM171441
AIA/NAS
NASM171442
AIA/NAS
NASM171443

AIA/NAS
NASM171444
AIA/NAS
NASM171445
AIA/NAS
NASM171446
AIA/NAS
NASM171447
AIA/NAS
NASM171448
AIA/NAS
NASM171449
AIA/NAS
NASM171450
AIA/NAS
NASM171451
AIA/NAS
NASM171452
AIA/NAS
NASM171453
AIA/NAS
NASM171454
AIA/NAS
NASM171455
AIA/NAS
NASM171456
AIA/NAS
NASM171457
AIA/NAS
NASM171458
AIA/NAS
NASM171459
AIA/NAS
NASM171460
AIA/NAS
NASM171461
AIA/NAS
NASM171462
AIA/NAS
NASM171463
AIA/NAS
NASM171464
AIA/NAS
NASM171465

AIA/NAS
NASM171466
AIA/NAS
NASM171467
AIA/NAS
NASM171468
AIA/NAS
NASM171469
AIA/NAS
NASM171470
AIA/NAS
NASM171471
AIA/NAS
NASM171472
AIA/NAS
NASM171473
AIA/NAS
NASM171474
AIA/NAS
NASM171475
AIA/NAS
NASM171476
AIA/NAS
NASM171477
AIA/NAS
NASM171478
AIA/NAS
NASM171479
AIA/NAS
NASM171480
AIA/NAS
NASM171481
AIA/NAS
NASM171482
AIA/NAS
NASM171483
AIA/NAS
NASM171484
AIA/NAS
NASM171485
AIA/NAS
NASM171486
AIA/NAS
NASM171487

AIA/NAS
NASM171488
AIA/NAS
NASM171489
AIA/NAS
NASM171490
AIA/NAS
NASM171491
AIA/NAS
NASM171492
AIA/NAS
NASM171493
AIA/NAS
NASM171494
AIA/NAS
NASM171495
AIA/NAS
NASM171496
AIA/NAS
NASM171497
AIA/NAS
NASM171498
AIA/NAS
NASM171499
AIA/NAS
NASM171500
AIA/NAS
NASM171501
AIA/NAS
NASM171502
AIA/NAS
NASM171503
AIA/NAS
NASM171504
AIA/NAS
NASM171505
AIA/NAS
NASM171506
AIA/NAS
NASM171507
AIA/NAS
NASM171508
AIA/NAS
NASM171509

AIA/NAS
NASM171510
AIA/NAS
NASM171511
AIA/NAS
NASM171512
AIA/NAS
NASM171513
AIA/NAS
NASM171514
AIA/NAS
NASM171515
AIA/NAS
NASM171516
AIA/NAS
NASM171517
AIA/NAS
NASM171518
AIA/NAS
NASM171519
AIA/NAS
NASM171520
AIA/NAS
NASM171521
AIA/NAS
NASM171522
AIA/NAS
NASM171523
AIA/NAS
NASM171524
AIA/NAS
NASM171525
AIA/NAS
NASM171526
AIA/NAS
NASM171527
AIA/NAS
NASM171528
AIA/NAS
NASM171529
AIA/NAS
NASM171530
AIA/NAS
NASM171531

AIA/NAS
NASM171532
AIA/NAS
NASM171533
AIA/NAS
NASM171534
AIA/NAS
NASM171535
AIA/NAS
NASM171536
AIA/NAS
NASM171537
AIA/NAS
NASM171538
AIA/NAS
NASM171539
AIA/NAS
NASM171540
AIA/NAS
NASM171541
AIA/NAS
NASM171542
AIA/NAS
NASM171543
AIA/NAS
NASM171544
AIA/NAS
NASM171545
AIA/NAS
NASM171546
AIA/NAS
NASM171547
AIA/NAS
NASM171548
AIA/NAS
NASM171549
AIA/NAS
NASM171550
AIA/NAS
NASM171551
AIA/NAS
NASM171552
AIA/NAS
NASM171553

AIA/NAS
NASM171554
AIA/NAS
NASM171555
AIA/NAS
NASM171556
AIA/NAS
NASM171557
AIA/NAS
NASM171558
AIA/NAS
NASM171559
AIA/NAS
NASM171560
AIA/NAS
NASM171561
AIA/NAS
NASM171562
AIA/NAS
NASM171563
AIA/NAS
NASM171564
AIA/NAS
NASM171565
AIA/NAS
NASM171566
AIA/NAS
NASM171567
AIA/NAS
NASM171568
AIA/NAS
NASM171569
AIA/NAS
NASM171570
AIA/NAS
NASM171571
AIA/NAS
NASM171572
AIA/NAS
NASM171573
AIA/NAS
NASM171574
AIA/NAS
NASM171575

AIA/NAS
NASM171576
AIA/NAS
NASM171577
AIA/NAS
NASM171578
AIA/NAS
NASM171579
AIA/NAS
NASM171580
AIA/NAS
NASM171581
AIA/NAS
NASM171582
AIA/NAS
NASM171583
AIA/NAS
NASM171584
AIA/NAS
NASM171585
AIA/NAS
NASM171586
AIA/NAS
NASM171587
AIA/NAS
NASM171588
AIA/NAS
NASM171589
AIA/NAS
NASM171590
AIA/NAS
NASM171591
AIA/NAS
NASM171592
AIA/NAS
NASM171593
AIA/NAS
NASM171594
AIA/NAS
NASM171595
AIA/NAS
NASM171596
AIA/NAS
NASM171597

AIA/NAS
NASM171598
AIA/NAS
NASM171599
AIA/NAS
NASM171600
AIA/NAS
NASM171601
AIA/NAS
NASM171602
AIA/NAS
NASM171603
AIA/NAS
NASM171604
AIA/NAS
NASM171605
AIA/NAS
NASM171606
AIA/NAS
NASM171607
AIA/NAS
NASM171608
AIA/NAS
NASM171609
AIA/NAS
NASM171610
AIA/NAS
NASM171611
AIA/NAS
NASM171612
AIA/NAS
NASM171613
AIA/NAS
NASM171614
AIA/NAS
NASM171615
AIA/NAS
NASM171616
AIA/NAS
NASM171617
AIA/NAS
NASM171618
AIA/NAS
NASM171619

AIA/NAS
NASM171620
AIA/NAS
NASM171621
AIA/NAS
NASM171622
AIA/NAS
NASM171623
AIA/NAS
NASM171624
AIA/NAS
NASM171625
AIA/NAS
NASM171626
AIA/NAS
NASM171627
AIA/NAS
NASM171628
AIA/NAS
NASM171629
AIA/NAS
NASM171630
AIA/NAS
NASM171631
AIA/NAS
NASM171632
AIA/NAS
NASM171633
AIA/NAS
NASM171634
AIA/NAS
NASM171635
AIA/NAS
NASM171636
AIA/NAS
NASM171637
AIA/NAS
NASM171638
AIA/NAS
NASM171639
AIA/NAS
NASM171640
AIA/NAS
NASM171641

AIA/NAS
NASM171642
AIA/NAS
NASM171643
AIA/NAS
NASM171644
AIA/NAS
NASM171645
AIA/NAS
NASM171646
AIA/NAS
NASM171647
AIA/NAS
NASM171648
AIA/NAS
NASM171649
AIA/NAS
NASM171650
AIA/NAS
NASM171651
AIA/NAS
NASM171652
AIA/NAS
NASM171653
AIA/NAS
NASM171654
AIA/NAS
NASM171655
AIA/NAS
NASM171656
AIA/NAS
NASM171657
AIA/NAS
NASM171658
AIA/NAS
NASM171659
AIA/NAS
NASM171660
AIA/NAS
NASM171661
AIA/NAS
NASM171662
AIA/NAS
NASM171663

AIA/NAS
NASM171664
AIA/NAS
NASM171665
AIA/NAS
NASM171666
AIA/NAS
NASM171667
AIA/NAS
NASM171668
AIA/NAS
NASM171669
AIA/NAS
NASM171670
AIA/NAS
NASM171671
AIA/NAS
NASM171672
AIA/NAS
NASM171673
AIA/NAS
NASM171674
AIA/NAS
NASM171675
AIA/NAS
NASM171676
AIA/NAS
NASM171677
AIA/NAS
NASM171678
AIA/NAS
NASM171679
AIA/NAS
NASM171680
AIA/NAS
NASM171681
AIA/NAS
NASM171682
AIA/NAS
NASM171683
AIA/NAS
NASM171684
AIA/NAS
NASM171685

AIA/NAS
NASM171686
AIA/NAS
NASM171687
AIA/NAS
NASM171688
AIA/NAS
NASM171689
AIA/NAS
NASM171690
AIA/NAS
NASM171691
AIA/NAS
NASM171692
AIA/NAS
NASM171693
AIA/NAS
NASM171694
AIA/NAS
NASM171695
AIA/NAS
NASM171696
AIA/NAS
NASM171697
AIA/NAS
NASM171698
AIA/NAS
NASM171699
AIA/NAS
NASM171700
AIA/NAS
NASM171701
AIA/NAS
NASM171702
AIA/NAS
NASM171703
AIA/NAS
NASM171704
AIA/NAS
NASM171705
AIA/NAS
NASM171706
AIA/NAS
NASM171707

AIA/NAS
NASM171708
AIA/NAS
NASM171709
AIA/NAS
NASM171710
AIA/NAS
NASM171711
AIA/NAS
NASM171712
AIA/NAS
NASM171713
AIA/NAS
NASM171714
AIA/NAS
NASM171715
AIA/NAS
NASM171716
AIA/NAS
NASM171717
AIA/NAS
NASM171718
AIA/NAS
NASM171719
AIA/NAS
NASM171720
AIA/NAS
NASM171721
AIA/NAS
NASM171722
AIA/NAS
NASM171723
AIA/NAS
NASM171724
AIA/NAS
NASM171725
AIA/NAS
NASM171726
AIA/NAS
NASM171727
AIA/NAS
NASM171728
AIA/NAS
NASM171729

AIA/NAS
NASM171730
AIA/NAS
NASM171731
AIA/NAS
NASM171732
AIA/NAS
NASM171733
AIA/NAS
NASM171734
AIA/NAS
NASM171735
AIA/NAS
NASM171736
AIA/NAS
NASM171737
AIA/NAS
NASM171738
AIA/NAS
NASM171739
AIA/NAS
NASM171740
AIA/NAS
NASM171741
AIA/NAS
NASM171742
AIA/NAS
NASM171743
AIA/NAS
NASM171744
AIA/NAS
NASM171745
AIA/NAS
NASM171746
AIA/NAS
NASM171747
AIA/NAS
NASM171748
AIA/NAS
NASM171749
AIA/NAS
NASM171750
AIA/NAS
NASM171751

AIA/NAS
NASM171752
AIA/NAS
NASM171753
AIA/NAS
NASM171754
AIA/NAS
NASM171755
AIA/NAS
NASM171756
AIA/NAS
NASM171757
AIA/NAS
NASM171758
AIA/NAS
NASM171759
AIA/NAS
NASM171760
AIA/NAS
NASM171761
AIA/NAS
NASM171762
AIA/NAS
NASM171763
AIA/NAS
NASM171764
AIA/NAS
NASM171765
AIA/NAS
NASM171766
AIA/NAS
NASM171767
AIA/NAS
NASM171768
AIA/NAS
NASM171769
AIA/NAS
NASM171770
AIA/NAS
NASM171771
AIA/NAS
NASM171772
AIA/NAS
NASM171773

AIA/NAS
NASM171774
AIA/NAS
NASM171775
AIA/NAS
NASM171776
AIA/NAS
NASM171777
AIA/NAS
NASM171778
AIA/NAS
NASM171779
AIA/NAS
NASM171780
AIA/NAS
NASM171781
AIA/NAS
NASM171782
AIA/NAS
NASM171783
AIA/NAS
NASM171784
AIA/NAS
NASM171785
AIA/NAS
NASM171786
AIA/NAS
NASM171787
AIA/NAS
NASM171788
AIA/NAS
NASM171789
AIA/NAS
NASM171790
AIA/NAS
NASM171791
AIA/NAS
NASM171792
AIA/NAS
NASM171793
AIA/NAS
NASM171794
AIA/NAS
NASM171795

AIA/NAS
NASM171796
AIA/NAS
NASM171797
AIA/NAS
NASM171798
AIA/NAS
NASM171799
AIA/NAS
NASM171800
AIA/NAS
NASM171801
AIA/NAS
NASM171802
AIA/NAS
NASM171803
AIA/NAS
NASM171804
AIA/NAS
NASM171805
AIA/NAS
NASM171806
AIA/NAS
NASM171807
AIA/NAS
NASM171808
AIA/NAS
NASM171809
AIA/NAS
NASM171810
AIA/NAS
NASM171811
AIA/NAS
NASM171812
AIA/NAS
NASM171813
AIA/NAS
NASM171814
AIA/NAS
NASM171815
AIA/NAS
NASM171816
AIA/NAS
NASM171817

AIA/NAS
NASM171818
AIA/NAS
NASM171819
AIA/NAS
NASM171820
AIA/NAS
NASM171821
AIA/NAS
NASM171822
AIA/NAS
NASM171823
AIA/NAS
NASM171824
AIA/NAS
NASM171825
AIA/NAS
NASM171826
AIA/NAS
NASM171827
AIA/NAS
NASM171828
AIA/NAS
NASM171829
AIA/NAS
NASM171830
AIA/NAS
NASM171831
AIA/NAS
NASM171832
AIA/NAS
NASM171833
AIA/NAS
NASM171834
AIA/NAS
NASM171835
AIA/NAS
NASM171836
AIA/NAS
NASM171837
AIA/NAS
NASM171838
AIA/NAS
NASM171839

AIA/NAS
NASM171840
AIA/NAS
NASM171841
AIA/NAS
NASM171842
AIA/NAS
NASM171843
AIA/NAS
NASM171844
AIA/NAS
NASM171845
AIA/NAS
NASM171846
AIA/NAS
NASM171847
AIA/NAS
NASM171848
AIA/NAS
NASM171849
AIA/NAS
NASM171850
AIA/NAS
NASM171851
AIA/NAS
NASM171852
AIA/NAS
NASM171853
AIA/NAS
NASM171854
AIA/NAS
NASM171855
AIA/NAS
NASM171856
AIA/NAS
NASM171857
AIA/NAS
NASM171858
AIA/NAS
NASM171859
AIA/NAS
NASM171860
AIA/NAS
NASM171861

AIA/NAS
NASM171862
AIA/NAS
NASM171863
AIA/NAS
NASM171864
AIA/NAS
NASM171865
AIA/NAS
NASM171866
AIA/NAS
NASM171867
AIA/NAS
NASM171868
AIA/NAS
NASM171869
AIA/NAS
NASM171870
AIA/NAS
NASM171871
AIA/NAS
NASM171872
AIA/NAS
NASM171873
AIA/NAS
NASM171874
AIA/NAS
NASM171875
AIA/NAS
NASM171876
AIA/NAS
NASM171877
AIA/NAS
NASM171878
AIA/NAS
NASM171879
AIA/NAS
NASM171880
AIA/NAS
NASM171881
AIA/NAS
NASM171882
AIA/NAS
NASM171883

AIA/NAS
NASM171884
AIA/NAS
NASM171885
AIA/NAS
NASM171886
AIA/NAS
NASM171887
AIA/NAS
NASM171888
AIA/NAS
NASM171889
AIA/NAS
NASM171890
AIA/NAS
NASM171891
AIA/NAS
NASM171892
AIA/NAS
NASM171893
AIA/NAS
NASM171894
AIA/NAS
NASM171895
AIA/NAS
NASM171896
AIA/NAS
NASM171897
AIA/NAS
NASM171898
AIA/NAS
NASM171899
AIA/NAS
NASM171900
AIAA S-017
AIAA R-024
AIAA R-100
AIIM MS1
AIIM TR2
AIIM TR4
AIIM MS23

AIIM MS24
AIIM MS26
AIIM MS32
AIIM MS34
AIIM MS43
AIIM MS46
AISC S303
AISC S329
AISC S335
AMCA 220
AMCA 302
AMCA 303
AMCA 501
AMCA 511
ANSI PH1.25
ANSI PH1.39
ANSI PH1.53
ANSI MH2.1
ANSI MH2.3
ANSI MH2.5
ANSI MH2.8
ANSI MH2.9
ANSI MH2.14
ANSI MH2.15
ANSI PH2.19
ANSI PH2.34
ANSI IT1.10
ANSI O1.1
ANSI S1.10

ANSI S1.12
ANSI MH3.1
ANSI MH3.3
ANSI MH3.4
ANSI X4.13
ANSI B11.2
ANSI N2.1
ANSI PH2.2
ANSI PH2.5
ANSI PH2.50
ANSI PH22.8
ANSI PH22.93
ANSI
PH22.109
ANSI PH22.110
ANSI
PH22.139
ANSI
PH22.164
ANSI PH3.31
ANSI PH3.35
ANSI PH3.48
ANSI PH3.64
ANSI PH3.607
ANSI PH3.617
ANSI X3.11
ANSI X3.19
ANSI X3.34
ANSI X3.52
ANSI X3.53
ANSI X3.55
ANSI X3.58
ANSI X3.127

ANSI X3.203
ANSI X3.205
ANSI C37.11
ANSI
C57.12.26
ANSI O5.1
ANSI C73A
ANSI B7.1
ANSI Z79.2
ANSI Z79.3
ANSI Z79.14
ANSI Z80.1
ANSI Z8.1
ANSI C84.1
ANSI IT9.1
ANSI IT9.10
ANSI Z9.2
ANSI
MH10.6M
ANSI B11.1
ANSI B11.3
ANSI B11.5
ANSI B11.6
ANSI B11.8
ANSI B11.9
ANSI B11.10
ANSI B11.11
ANSI B11.13
ANSI B11.15
ANSI Z236.1

ANSI A14.2
ANSI C29.1
ANSI C29.2
ANSI C29.3
ANSI C29.4
ANSI C29.5
ANSI C29.8
ANSI Z34.1
ANSI Z34.2
ANSI C37.12
ANSI C37.44
ANSI C37.46
ANSI C37.47
ANSI C37.121
ANSI C39.1
ANSI C50.12
ANSI C50.13
ANSI
C57.12.10
ANSI
C57.12.13
ANSI
C57.12.70
ANSI B71.1
ANSI
C57.12.25
ANSI B74.2
ANSI B74.3
ANSI B74.12
ANSI B74.13
ANSI B74.18
ANSI C78.1
ANSI C78.1
ANSI C78.2

ANSI C78.2
ANSI C78.2A
ANSI C78.2A
ANSI C78.3
ANSI C78.3
ANSI C78.1341
ANSI C78.1342
ANSI C78.1404
ANSI C78.1408
ANSI C78.1409
ANSI C78.1410
ANSI C78.1414
ANSI C78.1415
ANSI C78.1416
ANSI C78.180
ANSI C80.5
ANSI C81.61
ANSI C81.61
ANSI C81.61G
ANSI C81.61G
ANSI C82.2
ANSI Z87.1
ANSI Z88.2
ANSI Z90.1
ANSI Z97.1
ANSI C119.1

ANSI Z129.1
ANSI C135.1
ANSI C135.30
ANSI C136.14
ANSI C136.20
ANSI C136.21
ANSI B173.1
ANSI B173.3
ANSI B173.8
ANSI B212.1
ANSI Z245.1
APA PRP-108
APA E30
APA F405
APA E445
API SPEC 12D
API SPEC 5CT
API SPEC 5D
API SPEC 5L
API SPEC 6D
API MPMS
19.1
API STD 607
API PUBL
2015A
API STD 526
API STD 527
API STD 594
API STD 598
API STD 599
API STD 600
API STD 609
API STD 610
API STD 614
API STD 617
API STD 618

API STD 619

API STD 650
API STD 672
API RP 1004
API STD 1104
API RP 1110
API STD 1529
API RP 1615
API STD 2000
API RP 2003
API PUBL
2015
API BULL
2516
API PUBL
2517D
API STD 2551
API STD 2555
ARI 430
ARI 210/240
ARI 270
ARI 310/380
ARI 320
ARI 350
ARI 365
ARI 370
ARI 410
ARI 420
ARI 440
ARI 450
ARI 460
ARI 495
ARI 520
ARI 550/590
ARI 560
ARI 575
ARI 610
ARI 710
ARI 750
ARI 760

ARI 810
ARI 850
ARI 880
ASA S3.2
ASA S3.19
ASA S1.4
ASA S1.6
ASA S1.8
ASA S1.11
ASA S1.13
ASA S1.40
ASA S3.1
ASA S3.13
ASA S12.6
ASA S12.33
ASHRAE 15
ASHRAE 16
ASHRAE 17
ASHRAE 20
ASHRAE 23
ASHRAE 25
ASHRAE 29
ASHRAE 33
ASHRAE 37
ASHRAE 51
ASHRAE 52.1
ASHRAE 68
ASHRAE 90A
ASHRAE 116
ASME SEC I
ASME SEC I
ADD
ASME SEC I
CODES

ASME SEC I
FORMS/GUID
ES
ASME SEC I
INDEX
ASME SEC I
INTRODUCTI
ON
ASME SEC I
MA I
ASME SEC I
NMA A
ASME SEC I
PT PB
ASME SEC I
PT PEB
ASME SEC I
PT PFH
ASME SEC I
PT PFT
ASME SEC I
PT PG
ASME SEC I
PT PMB
ASME SEC I
PT PR
ASME SEC I
PT PVG
ASME SEC I
PT PW
ASME SEC I
PT PWT
ASME SEC I SI
UNITS
ASME SEC IV
ASME SEC IV
ADD
ASME SEC IV
INDEX
ASME SEC IV
INTRODUCTI
ON

ASME SEC IV
NMA APP A
ASME SEC IV
NMA APP B
ASME SEC IV
NMA APP C
ASME SEC IV
NMA APP D
ASME SEC IV
NMA APP E
ASME SEC IV
NMA APP F
ASME SEC IV
NMA APP H
ASME SEC IV
NMA APP I
ASME SEC IV
NMA APP K
ASME SEC IV
NMA APP L
ASME SEC IV
PT HLW
INTRO
ASME SEC IV
SI UNITS
ASME B1.1
ASME B1.2
ASME B1.3M
ASME B1.5
ASME B1.7M
ASME B1.8
ASME B1.9
ASME B1.12
ASME B1.13M
ASME B1.16M
ASME B1.20.1
ASME B1.20.3
ASME B1.20.5
ASME B1.20.7

ASME B1.21M
ASME B1.22M
ASME CSD-1
ASME CSD-1
INTERPRETAT
IONS
ASME CSD-1A
ASME MH1
ASME
MH1.2.2M
ASME
MH1.8M
ASME MH1A
ASME QEI-1
ASME SEC IV
MA APP 1
ASME SEC IV
PT HC A-1
ASME SEC IV
PT HF A-1
ASME SEC IV
PT HG A-1
ASME SEC IV
PT HLW A-1
ASME SEC
VIII D1 INT
VOL 42
ASME SEC
VIII DIVISION
1
ASME
B18.13A
ASME HST-2
ASME SEC IV
MA APP 2
ASME SEC IV
PT HC A-2
ASME SEC IV
PT HF A-2

ASME SEC IV
PT HG A-2
ASME SEC IV
PT HLW A-2
ASME PTC
25.3
ASME SEC IV
MA APP 3
ASME SEC IV
PT HC A-3
ASME SEC IV
PT HF A-3
ASME SEC IV
PT HG A-3
ASME SEC IV
PT HLW A-3
ASME B4.1
ASME HST-4
ASME PTC 4
ASME SEC IV
MA APP 4
ASME SEC IV
PT HC A-4
ASME SEC IV
PT HF-HW A-4
ASME SEC IV
PT HG A-4
ASME SEC IV
PT HLW A-4
ASME B56.1
INTERPRETAT
IONS
ASME B5.1M
ASME B5.8
ASME B5.9
ASME B5.10
ASME B5.16
ASME B5.18
ASME B5.35
ASME B5.40

ASME B5.45
ASME B5.53M
ASME B5.54
ASME HST-5
ASME SEC IV
MA APP 5
ASME SEC IV
PT HC A-5
ASME SEC IV
PT HF-HW A-5
ASME SEC IV
PT HG A-5
ASME SEC IV
PT HLW A-5
ASME HST-6
ASME SEC IV
PT HF-HW A-6
ASME SEC IV
PT HG A-6
ASME SEC IV
PT HLW A-6
ASME SEC IV
PT HF-HW A-7
ASME SEC IV
PT HG A-7
ASME SEC IV
PT HLW A-7
ASME SEC IV
PT HF-HW A-8
ASME SEC IV
PT HLW A-8
ASME PTC 9
ASME SEC IV
PT HF-HW A-9
ASME PTC 10

ASME SEC IV
PT HF-HB A10
ASME Y10.11
ASME
A112.19.3
ASME SEC IV
PT HF-HB A11
ASME SEC IV
PT HF-HB A12
ASME A13.1
ASME SEC IV
PT HF-HB A13
ASME SEC IV
PT HF-HB A14
ASME Y14.1
ASME Y14.1M
ASME Y14.2M
ASME Y14.3M
ASME Y14.4M
ASME
Y14.5.1M
ASME Y14.5M
ASME Y14.6
ASME Y14.7.1
ASME Y14.7.2
ASME Y14.8M
ASME
Y14.13M
ASME Y14.24
ASME
Y14.32.1M

ASME
Y14.34M
ASME
Y14.35M
ASME
Y14.36M
ASME Y14.38
ASME
Y14.100M
ASME B15.1
ASME SEC IV
PT HF-HB A15
ASME B16.1
ASME B16.3
ASME B16.4
ASME B16.4
INTERPRETAT
IONS
ASME B16.5
ASME B16.5
INTERPRETAT
IONS
ASME B16.5A
ASME B16.9
ASME B16.9
INTERPRETAT
IONS
ASME B16.10
ASME B16.11
ASME B16.12
ASME B16.14
ASME B16.15
ASME B16.15
INTERPRETAT
IONS
ASME B16.18
ASME B16.20
ASME
B16.20A
ASME B16.21
ASME B16.22
ASME
B16.22A

ASME B16.23
ASME B16.24
ASME B16.25
ASME B16.25
INTERPRETAT
IONS
ASME B16.26
ASME B16.29
ASME B16.33
ASME B16.34
ASME B16.34
INTERPRETAT
IONS
ASME
B16.34A
ASME B16.36
ASME B16.36
INTERPRETAT
IONS
ASME B16.38
ASME B16.39
ASME B16.40
ASME A17.1
ASME B17.1
ASME B17.2
ASME B18.1.1
ASME B18.1.2
ASME
B18.1.3M
ASME B18.2.1
ASME
B18.2.1A
ASME B18.2.2
ASME
B18.2.3.1M
ASME
B18.2.3.2M
ASME
B18.2.3.3M
ASME
B18.2.3.4M

ASME
B18.2.3.5M
ASME
B18.2.3.6M
ASME
B18.2.3.7M
ASME
B18.2.3.8M
ASME
B18.2.3.9M
ASME
B18.2.4.2M
ASME
B18.2.4.3M
ASME
B18.2.4.4M
ASME
B18.2.4.5M
ASME
B18.2.4.6M
ASME B18.3
ASME
B18.3.1M
ASME
B18.3.2M
ASME
B18.3.3M
ASME
B18.3.4M
ASME
B18.3.5M
ASME
B18.3.6M
ASME B18.5
ASME
B18.5.2.1M
ASME
B18.5.2.2M
ASME B18.6.1
ASME B18.6.2
ASME B18.6.3
ASME B18.6.4
ASME
B18.6.5M

ASME
B18.6.7M
ASME B18.7
ASME
B18.7.1M
ASME B18.8.1
ASME B18.9
ASME B18.10
ASME B18.11
ASME B18.12
ASME B18.13
ASME
B18.13.1M
ASME B18.15
ASME
B18.16.1M
ASME
B18.16.2M
ASME
B18.16.3M
ASME
B18.18.1M
ASME
B18.18.2M
ASME
B18.18.2M
SUPPLEMENT
ASME
B18.18.3M
ASME
B18.18.4M
ASME
B18.21.1
ASME
B18.21.2M
ASME
B18.22.1
ASME
B18.22M
ASME
B18.24.1
ASME
B18.24.2

ASME
B18.24.3
ASME PTC
19.5
ASME PTC
19.11
ASME PTC 23
ASME PTC 26
ASME B27.6
ASME B27.7
ASME B27.8M
ASME B29.1M
ASME
B29.14M
ASME
B29.21M
ASME B30.9
ASME B30.10
ASME B30.10
INTERPRETAT
IONS
ASME B30.11
ASME
B30.11A
ASME B30.16
ASME B30.16
INTERPRETAT
IONS
ASME B31.1
CASES NO. 25
ASME B31.1
CASES NO. 26
ASME B31.1
ASME B31.1
INTERPRETAT
IONS
ASME B31.1A
ASME B31.1B
ASME B31.3

ASME B31.3A
ASME B31.4
ASME B31.5
ASME B31.8
ASME B31.9
ASME B31.9
INTERPRETAT
IONS
ASME B32.3M
ASME B32.4M
ASME B32.5
ASME B32.6M
ASME Y32.4
ASME Y32.10
ASME
B36.10M
ASME SEC I
INT VOL 42
ASME SEC IV
INT VOL 42
ASME SEC I
INT VOL 43
ASME SEC IV
INT VOL 43
ASME SEC I
INT VOL 44
ASME SEC IV
INT VOL 44
ASME B46.1
ASME B47.1
ASME B56.1
ASME
B56.11.3
ASME
B56.11.4
ASME B73.1M
ASME B89.3.1
ASME B94.2
ASME B94.6

ASME B94.19
ASME
B94.51M
ASME B94.54
ASME SEC I
A98
ASME SEC IV
A98
ASME SEC I
A99
ASME SEC IV
A99
ASME B107.1
ASME B107.2
ASME
B107.4M
ASME
B107.5M
ASME B107.6
ASME
B107.8M
ASME
B107.10M
ASME
B107.11M
ASME
B107.14M
ASME B107.15
ASME
B107.16M
ASME
B107.17M
ASME B107.19
ASME
B107.20M
ASME B107.21
ASME
B107.23M
ASME
A112.6.1M

ASME
A112.14.1
ASME
A112.18.1
ASME
A112.19.1M
ASME
A112.19.2M
ASME
A112.19.4M
ASME
A112.19.5
ASME
A112.21.1M
ASME
A112.21.2M
ASME
A112.36.2M
ASQ Z1.4
ASQ A8402
ASQ Q9000-1
ASQ Q9001
ASQ Q9002
ASQ Q9003
ASQ Q9004-1
ASSE/SAFE
A14.3
ASSE/SAFE
Z359.1
ASSE 1001
ASSE 1003
ASSE 1009
ASSE 1010
ASSE 1019
ASSE 1020
ASSE 1037
ASTM B1
ASTM E1
ASTM A3
ASTM B3
ASTM E4

ASTM A1
ASTM E10
ASTM E11
ASTM A2
ASTM B2
ASTM E23
ASTM C24
ASTM
B26/B26M
ASTM E30
ASTM E3
ASTM G38
ASTM C4
ASTM D4
ASTM A49
ASTM
A53/A53M
ASTM D56
ASTM C62
ASTM B5
ASTM C5
ASTM D5
ASTM A66
ASTM A6/A6M
ASTM B6
ASTM D6
ASTM E6
ASTM C78
ASTM E7
ASTM G7
ASTM B8
ASTM E8 REV
B
ASTM E8M
REV B
ASTM
B92/B92M
ASTM E9 REV
A

ASTM E97
ASTM SI 10
ASTM B105
ASTM B111M
ASTM E122
ASTM E133
ASTM A135
ASTM E140
ASTM D143
ASTM F146
ASTM
A148/A148M
ASTM
B152/B152M
ASTM B172
ASTM B173
ASTM C208
ASTM C216
ASTM C12
ASTM D12
ASTM
B232/B232M
ASTM
A234/A234M
REV A
ASTM
A240/A240M
ASTM D245
ASTM A269
ASTM A270
ASTM E270
ASTM
A285/A285M
ASTM D13
ASTM C14
ASTM C14M

ASTM E317
ASTM F373
ASTM E381
ASTM G15
REV B
ASTM D391
ASTM D429
ASTM D445
ASTM
B16/B16M
ASTM D16
ASTM A473
ASTM A500
ASTM A501
ASTM
A516/A516M
ASTM D516
ASTM E519
ASTM C533
ASTM F543
ASTM E18
ASTM D562
ASTM C579
ASTM B19
ASTM B612
ASTM
A615/A615M
REV A
ASTM A618
ASTM B618
ASTM D647
REV A
ASTM C652
ASTM D664
ASTM D702
ASTM
A20/A20M

ASTM C20
ASTM D20
ASTM E737
ASTM D750
ASTM
A775/A775M
REV B
ASTM B21
ASTM B21M
ASTM E21
ASTM D797
ASTM G21
ASTM
A802/A802M
ASTM D816
ASTM C840
ASTM D861
ASTM C862
ASTM E874
ASTM C920
ASTM B22
ASTM G22
ASTM F1040
ASTM E1077
ASTM E1155
ASTM D1248
REV A
ASTM B23
ASTM D1531
ASTM D1547
ASTM C25
ASTM D1583
ASTM D25
ASTM D1610
ASTM E1695
ASTM D1743

ASTM D1744
ASTM D1761
ASTM D1783
ASTM D1876
ASTM E1925
ASTM
A27/A27M
ASTM C27
ASTM
C28/C28M
ASTM E28
ASTM G28
ASTM D2000
ASTM D2130
ASTM
A29/A29M
ASTM B29
ASTM
C29/C29M
ASTM D29
ASTM E29
REV A
ASTM G29
ASTM D2277
ASTM B30
ASTM D2417
ASTM D2436
ASTM D2624
ASTM D2740
ASTM D2742
ASTM
C31/C31M
ASTM D2934
ASTM B32

ASTM C32
ASTM B33
ASTM C33
ASTM D3254
ASTM C34
ASTM D34
ASTM E34
ASTM G34
ASTM D3446
ASTM D3449
ASTM D3499
ASTM D3501
ASTM C35
ASTM D3550
ASTM
A36/A36M
REV A
ASTM
B36/B36M
ASTM
C36/C36M
ASTM D36
ASTM F36
ASTM
C37/C37M
ASTM F37
ASTM F38
ASTM
C39/C39M
ASTM C40
ASTM D4308
ASTM D4339
ASTM D4562
ASTM D4632
ASTM D41
ASTM B42

ASTM
C42/C42M
ASTM B43
ASTM D43
ASTM
D5449/D5449
M
ASTM E45
ASTM
A47/A47M
ASTM G47
ASTM D6015
ASTM A48
REV A
ASTM B49
ASTM C50
ASTM D50
ASTM E50
ASTM C51
ASTM E53
ASTM C55
ASTM E55
ASTM C56
ASTM
C59/C59M
ASTM B61
ASTM C61
ASTM
C61/C61M
ASTM B62
ASTM E62
ASTM B63
ASTM B66
ASTM A67
ASTM B67
REV A

ASTM C67
ASTM B68
ASTM B69
REV A
ASTM D69
ASTM C70
ASTM D70
ASTM E70
ASTM D71
ASTM E72
ASTM C73
REV A
ASTM A74
ASTM E74
REV A
ASTM B75
ASTM B75M
ASTM D75
ASTM E75
ASTM C76
ASTM C76M
ASTM E76
ASTM E77
ASTM
C79/C79M
ASTM D79
ASTM A82
REV A
ASTM D83
ASTM E83
ASTM E84
REV A
ASTM G85
ASTM B86
ASTM D86
REV A
ASTM F86
ASTM C87
ASTM B88
ASTM B88M
ASTM C88
REV A
ASTM D88

ASTM E88
ASTM
A90/A90M
REV A
ASTM
B90/B90M
ASTM C90
ASTM E90
ASTM B91
ASTM C91
ASTM D91
ASTM C92
ASTM D92
REV A
ASTM E92
ASTM
B93/B93M
ASTM D93
ASTM PS93
ASTM B94
ASTM
C94/C94M
ASTM D94
ASTM D95
ASTM
B96/B96M
ASTM E96
ASTM D97
REV A
ASTM
B98/B98M
ASTM D98
ASTM
B99/B99M
ASTM C99
ASTM E100
ASTM B101
ASTM
B103/B103M

ASTM E103
ASTM E104
ASTM F104
ASTM
B107/B107M
ASTM A108
ASTM B108
ASTM E108
ASTM
A109/A109M
ASTM
C109/C109M
ASTM C110
REV A
ASTM E110
ASTM B111
ASTM E111
ASTM E112
ASTM C113
ASTM D113
ASTM E114
ASTM A116
ASTM D116
ASTM B117
ASTM C117
ASTM D117
ASTM C119
REV B
ASTM E119
REV A
ASTM F119
ASTM C120
ASTM D120
ASTM E120
ASTM A121
ASTM
B121/B121M
ASTM C121
ASTM
B122/B122M

ASTM
A123/A123M
ASTM C123
ASTM D123
REV B
ASTM
B124/B124M
ASTM A125
ASTM C125
REV A
ASTM E125
ASTM A126
ASTM C126
ASTM D126
ASTM E126
ASTM B127
ASTM C127
ASTM D127
ASTM E127
ASTM
A128/A128M
ASTM C128
ASTM D128
ASTM C129
REV A
ASTM D129
ASTM D130
ASTM
A131/A131M
ASTM C131
ASTM E132
ASTM C133
ASTM A134
ASTM B134
ASTM B135
ASTM B135M
ASTM C135
ASTM B136

ASTM C136
REV A
ASTM E136
ASTM B137
ASTM F137
ASTM B138
ASTM B138M
ASTM C138
ASTM F138
ASTM A139
ASTM B139
ASTM B139M
ASTM C139
ASTM E139
ASTM
B140/B140M
ASTM C140
ASTM D140
ASTM C141
ASTM C142
ASTM A143
ASTM
C143/C143M
ASTM C144
ASTM E145
ASTM D146
ASTM F147
ASTM B148
ASTM C148
ASTM C149
ASTM D149
REV A
ASTM B150
ASTM B150M
REV A
ASTM C150

ASTM D150
ASTM F150
ASTM
B151/B151M
ASTM F152
ASTM
A153/A153M
ASTM B153
ASTM D153
ASTM B154
ASTM E154
ASTM E155
ASTM C156
ASTM D156
ASTM
C157/C157M
ASTM C158
ASTM A159
ASTM B159M
REV A
ASTM C159
ASTM B162
ASTM C162
ASTM E162
ASTM B163
REV A
ASTM B164
ASTM E164
ASTM B165
ASTM C165
ASTM B166
ASTM A167
ASTM B167
ASTM C167
ASTM E167
ASTM B168
ASTM E168
ASTM B169

ASTM B169M
ASTM C169
ASTM B170
ASTM C170
ASTM
B171/B171M
ASTM C171
REV A
ASTM E171
ASTM C172
ASTM C173
REV A
ASTM D173
REV B
ASTM B174
ASTM
C174/C174M
ASTM E175
ASTM A176
ASTM B176
ASTM B177
ASTM C177
ASTM E177
REV A
ASTM
A178/A178M
ASTM B179
ASTM A183
ASTM B183
ASTM C183
ASTM
A184/A184M
ASTM A185
ASTM C185
ASTM E186
ASTM B187
ASTM D187
ASTM B188
ASTM C188
ASTM B189

ASTM D189
ASTM E190
ASTM E191
ASTM
A192/A192M
ASTM
C192/C192M
ASTM E192
ASTM
A193/A193M
REV B
ASTM E193
ASTM
A194/A194M
REV B
ASTM C195
ASTM B196
REV A
ASTM B196M
ASTM C196
ASTM E196
ASTM
A197/A197M
ASTM
B197/B197M
ASTM B199
ASTM C199
ASTM B200
ASTM E200
ASTM B201
ASTM D202
ASTM E202
ASTM
A203/A203M
ASTM C203
ASTM E203
ASTM
A204/A204M
ASTM D204

ASTM
B206/B206M
ASTM C206
ASTM C207
ASTM B208
ASTM E208
REV A
ASTM B209
ASTM B209M
ASTM C209
ASTM D209
ASTM B210
ASTM B210M
ASTM C210
ASTM B211
ASTM B211M
REV A
ASTM B212
ASTM C212
ASTM B213
ASTM
A214/A214M
ASTM B214
ASTM B215
ASTM C215
ASTM E215
ASTM
A213/A213M
REV A
ASTM
A216/A216M
ASTM
A217/A217M
ASTM C217
ASTM D217
ASTM
A220/A220M
ASTM E220
ASTM B221

ASTM B221M
ASTM E223
ASTM D224
ASTM E224
ASTM C225
ASTM D225
REV A
ASTM C226
ASTM D226
REV A
ASTM
A227/A227M
ASTM B227
ASTM C227
REV A
ASTM D227
REV A
ASTM E227
ASTM
A228/A228M
ASTM B228
ASTM E228
ASTM
A229/A229M
ASTM B229
ASTM D229
ASTM
A230/A230M
ASTM
B230/B230M
ASTM
A231/A231M
ASTM
B231/B231M
ASTM C231
ASTM
A232/A232M
ASTM C232
ASTM C233
ASTM D233

ASTM D235
ASTM B236
ASTM B236M
ASTM C236
ASTM A239
ASTM B240
ASTM D240
ASTM
B241/B241M
ASTM C241
ASTM
A242/A242M
REV A
ASTM D242
ASTM E243
ASTM B244
ASTM D244
ASTM B246
ASTM A247
ASTM B247
ASTM B247M
ASTM B248
ASTM B248M
ASTM E248
ASTM
A249/A249M
ASTM
B249/B249M
ASTM D249
ASTM B250
ASTM B250M
ASTM B251
ASTM B251M

ASTM E251
ASTM A252
ASTM E252
ASTM B253
ASTM A254
ASTM B254
ASTM A255
ASTM D256
ASTM E256
ASTM D257
ASTM E257
ASTM B258
ASTM E258
ASTM C260
ASTM D260
ASTM D261
ASTM A262
ASTM A263
REV A
ASTM B263
ASTM D263
ASTM E263
ASTM A264
REV A
ASTM E264
ASTM A265
REV A
ASTM B265
ASTM E265
ASTM C267
ASTM
A268/A268M
REV A
ASTM D268
ASTM C270
ASTM B271
ASTM B272

ASTM C272
ASTM E272
ASTM C273
ASTM E273
ASTM
A275/A275M
ASTM B275
ASTM A276
REV A
ASTM B276
ASTM D276
REV A
ASTM A278
ASTM A278M
ASTM D279
ASTM B280
ASTM D280
ASTM E280
ASTM B281
ASTM D281
ASTM C282
ASTM
A283/A283M
ASTM B283
REV A
ASTM D283
ASTM E283
ASTM B286
ASTM C286
ASTM D287
ASTM E288
ASTM F288
ASTM C289
ASTM E290
REV A

ASTM E291
ASTM C293
ASTM C294
ASTM A295
ASTM C295
ASTM D295
ASTM C297
ASTM D297
ASTM B298
ASTM E300
ASTM
B301/B301M
ASTM C301
ASTM D301
ASTM
A302/A302M
ASTM B302
ASTM C302
ASTM C303
ASTM A304
ASTM D304
ASTM D305
ASTM B306
ASTM A307
ASTM C307
ASTM F307
ASTM A308
ASTM
B308/B308M
ASTM E308
ASTM A309
REV A
ASTM C309
REV A
ASTM E309
ASTM E310
ASTM F310
ASTM B311
ASTM C311

ASTM
A312/A312M
REV C
ASTM D312
ASTM
A313/A313M
ASTM
B313/B313M
ASTM A314
ASTM B315
ASTM C315
ASTM
B316/B316M
ASTM B317
ASTM
C317/C317M
ASTM
C318/C318M
ASTM
A320/A320M
REV B
ASTM F320
ASTM C321
ASTM A322
ASTM B322
ASTM D322
ASTM D323
REV A
ASTM A325
ASTM A325M
ASTM A327
ASTM
A328/A328M
ASTM B328
ASTM B329
ASTM D329
ASTM E329
REV B
ASTM B330
ASTM C330

ASTM D330
ASTM E330
ASTM F330
ASTM A331
ASTM C331
ASTM D331
ASTM E331
ASTM C332
ASTM
A333/A333M
ASTM B333
ASTM E334
ASTM
A335/A335M
ASTM B335
ASTM C335
ASTM E335
ASTM
A336/A336M
ASTM C336
ASTM E336
ASTM B338
ASTM C338
ASTM E338
ASTM B339
ASTM E340
ASTM
A341/A341M
ASTM D341
ASTM
A342/A342M
ASTM
B345/B345M
ASTM D345
ASTM E345
ASTM E346
ASTM B348
ASTM D348
ASTM
A350/A350M
REV C

ASTM D350
ASTM E350
ASTM
A351/A351M
ASTM D351
ASTM E351
ASTM
A352/A352M
ASTM A354
REV A
ASTM E354
ASTM B355
ASTM E355
ASTM C356
ASTM E357
ASTM D358
ASTM E358
ASTM B359
ASTM E359
ASTM B361
ASTM C361
ASTM C361M
ASTM B363
ASTM C365
ASTM
A366/A366M
ASTM C366
ASTM F366
ASTM B367
ASTM B368
ASTM B369
ASTM D369
ASTM A370
REV A
ASTM B370
ASTM B371
ASTM D371
ASTM B372

ASTM B373
ASTM D374
ASTM E376
ASTM A380
ASTM D380
ASTM D381
ASTM E384
ASTM A385
ASTM F386
ASTM
A387/A387M
ASTM D387
ASTM F387
ASTM
A389/A389M
ASTM C390
ASTM D390
ASTM E390
ASTM C393
ASTM A394
ASTM
A395/A395M
ASTM B395
ASTM B395M
ASTM C395
ASTM D395
ASTM D396
ASTM B397
ASTM
B399/B399M
ASTM E399
ASTM A400
ASTM C401
ASTM F402
ASTM
A403/A403M
REV B
ASTM B403

ASTM
C403/C403M
ASTM C404
ASTM F405
ASTM B406
ASTM E407
ASTM C408
ASTM D409
ASTM F409
REV A
ASTM F410
ASTM A411
ASTM B411
ASTM C411
ASTM B412
ASTM C412
ASTM C412M
ASTM D412
REV A
ASTM F412
ASTM
A413/A413M
ASTM C413
ASTM D413
ASTM E413
ASTM C414
ASTM B415
ASTM B418
REV A
ASTM C418
ASTM D420
ASTM
A421/A421M
REV A
ASTM C421
ASTM D421
ASTM B422
ASTM D422
ASTM
A423/A423M

ASTM C423
ASTM A424
ASTM B424
REV A
ASTM E424
ASTM C425
ASTM C426
ASTM E426
ASTM B427
REV A
ASTM
A428/A428M
ASTM B428
ASTM E428
ASTM B429
ASTM B430
ASTM D430
ASTM A434
REV A
ASTM D434
ASTM A436
ASTM F436
ASTM F436M
ASTM F437
ASTM A438
ASTM
B438/B438M
REV A
ASTM E438
ASTM F438
ASTM A439
ASTM B439
ASTM F439
REV A
ASTM B441

ASTM
F441/F441M
ASTM
C442/C442M
REV A
ASTM
F442/F442M
ASTM B443
ASTM C443
ASTM C443M
ASTM B444
ASTM C444
ASTM C444M
ASTM D444
ASTM B446
ASTM D446
ASTM E446
ASTM F446
ASTM B447
ASTM D448
ASTM A449
ASTM B449
ASTM
C449/C449M
ASTM D449
ASTM E449
ASTM
A450/A450M
REV A
ASTM D450
ASTM B452
ASTM
A453/A453M
ASTM B453
ASTM B453M
ASTM D453
ASTM D454

ASTM B456
ASTM D456
ASTM E456
ASTM E458
ASTM F458
ASTM F459
ASTM D460
ASTM D461
ASTM
A463/A463M
ASTM B463
ASTM B465
ASTM D465
ASTM
A466/A466M
ASTM
B466/B466M
ASTM F467
ASTM F467M
ASTM F468
ASTM F468M
ASTM A470
ASTM
C470/C470M
ASTM D470
ASTM D471
ASTM B472
ASTM C472
ASTM D473
ASTM A475
ASTM C475
ASTM B476
ASTM C476
ASTM D476
ASTM F476
ASTM B477
ASTM F477
ASTM A478
ASTM C478

ASTM C478M
ASTM D478
ASTM E478
REV A
ASTM
A479/A479M
ASTM
A480/A480M
ASTM D480
ASTM F480
REV A
ASTM C481
ASTM D482
REV A
ASTM
B483/B483M
ASTM F483
ASTM
A484/A484M
ASTM F484
ASTM A485
ASTM
A487/A487M
ASTM B487
ASTM
A488/A488M
ASTM B488
ASTM E488
ASTM A489
ASTM A490
ASTM A490M
ASTM D490
ASTM E490
REV A
ASTM
B491/B491M
ASTM A492
ASTM A493
ASTM E493

ASTM F493
ASTM
A494/A494M
ASTM
C494/C494M
REV A
ASTM E494
ASTM C495
REV A
ASTM D495
ASTM A496
REV A
ASTM C496
ASTM A497
ASTM C497
ASTM C497M
ASTM C498
ASTM E498
ASTM A499
ASTM B499
ASTM C499
ASTM E499
ASTM B501
ASTM D501
ASTM F502
ASTM B504
ASTM A505
ASTM B505
ASTM A506
ASTM C506
ASTM C506M
ASTM A507
ASTM C507
ASTM C507M
ASTM
A508/A508M

ASTM B508
ASTM C509
ASTM A510
ASTM A510M
ASTM F510
ASTM A511
ASTM D511
ASTM A512
ASTM D512
ASTM A513
ASTM C513
ASTM
A514/A514M
REV A
ASTM C514
ASTM E514
ASTM
A515/A515M
ASTM C516
ASTM
A517/A517M
ASTM D517
ASTM E517
ASTM
A518/A518M
ASTM C518
ASTM D518
ASTM E518
REV A
ASTM A519
ASTM B520
ASTM C520
ASTM D520
ASTM B522
ASTM D522
REV A
ASTM D523

ASTM D524
ASTM D525
ASTM F526
ASTM E527
ASTM
A529/A529M
ASTM D529
ASTM E529
ASTM
A530/A530M
ASTM B530
ASTM C531
ASTM D531
ASTM
A532/A532M
REV A
ASTM
A533/A533M
ASTM A534
ASTM C534
ASTM C535
ASTM A536
ASTM E536
ASTM F536
ASTM
A537/A537M
ASTM E537
ASTM F537
ASTM B540
ASTM B541
ASTM F541
ASTM C542
ASTM D542
ASTM E542
ASTM B543
ASTM D543

ASTM E543
ASTM B545
ASTM D545
ASTM E545
ASTM D546
ASTM E546
ASTM
B547/B547M
ASTM C547
ASTM C549
ASTM C550
ASTM C552
ASTM F552
ASTM C553
ASTM A554
ASTM
A555/A555M
ASTM D555
ASTM B557
ASTM B557M
ASTM C557
ASTM E557
ASTM D558
ASTM B559
ASTM D559
ASTM D560
ASTM F560
ASTM A561
ASTM C561
ASTM C562
ASTM A563
ASTM A563M
ASTM B563
ASTM D563
ASTM
A564/A564M
ASTM B564
REV A

ASTM C564
ASTM D564
ASTM A565
ASTM B565
ASTM D565
ASTM B566
ASTM C566
ASTM D566
ASTM B567
ASTM C567
ASTM
A568/A568M
REV B
ASTM B568
ASTM C568
ASTM F568
ASTM F568M
ASTM
A570/A570M
ASTM C570
ASTM D570
ASTM E570
ASTM B571
ASTM D572
ASTM D573
ASTM A574
ASTM A574M
ASTM B574
REV A
ASTM A575
ASTM B575
REV A
ASTM D575
ASTM A576
REV B
ASTM E576
ASTM B577
ASTM E577
ASTM
A578/A578M

ASTM B578
ASTM C578
ASTM D578
ASTM A579
ASTM B579
ASTM D579
ASTM
A580/A580M
ASTM B580
ASTM C580
ASTM E580
ASTM
A581/A581M
REV B
ASTM C581
ASTM
A582/A582M
REV B
ASTM C582
ASTM B584
ASTM D585
ASTM F585
ASTM A586
ASTM C586
ASTM C587
ASTM
A588/A588M
REV A
ASTM
C588/C588M
ASTM A589
ASTM D590
ASTM
A591/A591M
ASTM B591
REV A
ASTM C591

ASTM C592
ASTM B593
ASTM F593
ASTM B594
ASTM F594
ASTM A595
ASTM C595
REV A
ASTM D595
ASTM E595
ASTM B596
ASTM E596
ASTM A597
ASTM B597
ASTM C597
ASTM B598
ASTM A600
REV A
ASTM B600
ASTM D600
ASTM B601
REV A
ASTM C602
REV A
ASTM E602
ASTM A603
ASTM C603
ASTM A604
ASTM D604
ASTM E604
ASTM E605
ASTM A606
ASTM F606
ASTM F606M
ASTM A607

ASTM B607
ASTM D607
ASTM E607
ASTM F607
ASTM
A609/A609M
ASTM
B609/B609M
ASTM D609
ASTM C610
ASTM D610
ASTM A611
ASTM D611
ASTM C612
REV A
ASTM D612
ASTM
C613/C613M
ASTM D613
ASTM C615
ASTM C616
ASTM B617
ASTM C617
ASTM D617
ASTM C618
ASTM D618
ASTM E619
ASTM
A620/A620M
ASTM E621
ASTM
A622/A622M
ASTM D622
ASTM A623
ASTM A623M
ASTM F623
ASTM
A624/A624M
ASTM B624

ASTM D624
ASTM
A625/A625M
ASTM
A626/A626M
ASTM A627
ASTM B628
ASTM C629
ASTM D629
ASTM A630
ASTM
C630/C630M
ASTM
A633/A633M
REV A
ASTM C633
ASTM D633
ASTM
A635/A635M
ASTM C635
ASTM D635
ASTM C636
ASTM B637
ASTM C637
REV A
ASTM C638
ASTM D638
ASTM D638M
ASTM C639
ASTM B640
ASTM F640
ASTM
A641/A641M
ASTM C641
ASTM D642
ASTM B643
ASTM A644
ASTM B644
ASTM D644

ASTM B645
ASTM C645
ASTM B646
ASTM D646
ASTM D648
REV A
ASTM E648
ASTM B650
ASTM C651
ASTM D653
ASTM C654
ASTM C654M
ASTM C655
ASTM C655M
ASTM C658
ASTM
A659/A659M
ASTM B660
ASTM D660
ASTM B661
ASTM C661
ASTM D661
ASTM D662
ASTM E662
ASTM
A663/A663M
ASTM B663
ASTM C663
ASTM C665
ASTM D665
ASTM E665
ASTM A666
ASTM
B666/B666M
ASTM C666
ASTM E666
ASTM
A667/A667M

ASTM E667
ASTM
A668/A668M
ASTM E668
ASTM C669
ASTM B670
ASTM C670
ASTM F670
ASTM D671
ASTM E671
ASTM E672
ASTM
A673/A673M
ASTM
A675/A675M
REV A
ASTM E675
ASTM C679
ASTM A681
ASTM F681
ASTM
A682/A682M
ASTM E682
ASTM F682
REV A
ASTM B683
ASTM F683
ASTM
A684/A684M
ASTM B684
ASTM B685
ASTM
C685/C685M
REV A
ASTM D685
ASTM A686
ASTM B687
ASTM B689
ASTM D689
REV A

ASTM
A690/A690M
REV A
ASTM E691
ASTM D692
ASTM A693
ASTM D693
ASTM E694
ASTM A695
REV B
ASTM B695
ASTM C695
ASTM D695
ASTM A696
REV A
ASTM B696
ASTM D696
ASTM F696
ASTM D698
REV A
ASTM A700
ASTM C700
ASTM A702
ASTM C702
ASTM
A703/A703M
ASTM D704
ASTM F704
ASTM
A706/A706M
ASTM D706
ASTM D707
ASTM
F707/F707M
ASTM F708
ASTM D709
ASTM E709
ASTM
A710/A710M
ASTM D710
ASTM A711

ASTM D711
ASTM E713
ASTM D714
ASTM A715
ASTM F718
ASTM C719
ASTM D720
ASTM E720
ASTM C721
ASTM D721
ASTM E721
ASTM F721
ASTM E722
ASTM D724
ASTM C725
ASTM C726
REV A
ASTM D726
ASTM F726
ASTM C728
ASTM B731
ASTM C732
ASTM D732
ASTM E732
ASTM A733
ASTM B733
ASTM E736
ASTM F738
ASTM F738M
ASTM A739
REV A
ASTM C739
ASTM A740
ASTM B740
ASTM
A742/A742M
ASTM B742

ASTM
A743/A743M
REV A
ASTM
A744/A744M
ASTM C744
ASTM F744M
ASTM
B745/B745M
ASTM A746
ASTM
B746/B746M
ASTM D747
ASTM
A749/A749M
ASTM A751
ASTM D751
ASTM C754
ASTM
A755/A755M
ASTM E756
ASTM
A757/A757M
ASTM F758
ASTM A759
ASTM E759
ASTM
A760/A760M
ASTM E760
ASTM
A761/A761M
ASTM E761
ASTM
A762/A762M
ASTM B763
ASTM A764
ASTM C764
ASTM F765

ASTM B766
ASTM
A767/A767M
REV B
ASTM A768
ASTM B768
ASTM
A770/A770M
ASTM B770
ASTM D772
ASTM F773M
ASTM
D774/D774M
ASTM E774
ASTM C778
ASTM D779
ASTM A780
ASTM B780
ASTM C780
ASTM B782
ASTM F782
ASTM F783
ASTM D785
ASTM E785
ASTM
A786/A786M
REV B
ASTM E786
ASTM D787
ASTM E787
ASTM A788
REV A
ASTM
B788/B788M
ASTM D788
ASTM E788
ASTM
F788/F788M
ASTM D790

ASTM F791
ASTM
A792/A792M
ASTM C792
ASTM D792
ASTM A793
ASTM C793
ASTM A794
ASTM F794
ASTM C795
ASTM E795
ASTM
A796/A796M
ASTM C796
ASTM
A798/A798M
REV A
ASTM C800
ASTM D800
ASTM E800
ASTM E801
ASTM F801
ASTM A805
ASTM C805
ASTM B806
REV A
ASTM D808
ASTM A809
ASTM C811
ASTM E812
ASTM
F812/F812M
ASTM D813
ASTM E814
ASTM F814
REV B

ASTM C816
ASTM A818
ASTM C822
ASTM D822
ASTM E822
ASTM C823
ASTM D823
ASTM B824
ASTM E825
ASTM
A827/A827M
REV A
ASTM C827
REV A
ASTM C828
ASTM D828
ASTM
A829/A829M
ASTM D832
ASTM C834
ASTM
E835/E835M
ASTM F835
ASTM F835M
ASTM C836
ASTM F836
ASTM F836M
ASTM F837
ASTM F837M
ASTM C841
ASTM F841
ASTM F842
ASTM C843
ASTM C844
ASTM F844
ASTM C847

ASTM D847
ASTM D848
ASTM A849
ASTM D849
ASTM D850
ASTM A853
ASTM D853
ASTM D854
ASTM F856
ASTM
A857/A857M
REV A
ASTM F857
ASTM D858
ASTM F858
ASTM D859
ASTM E859
ASTM F859
ASTM C860
ASTM F860
ASTM A861
ASTM F861
ASTM C864
ASTM E864
ASTM C865
ASTM D865
ASTM E865
ASTM E866
ASTM D869
ASTM D871
ASTM F872
ASTM C873
ASTM D873
REV A

ASTM D874
ASTM D876
ASTM D877
ASTM D878
REV A
ASTM F879
ASTM F879M
ASTM A880
ASTM F880
ASTM F880M
ASTM C881
ASTM C882
ASTM D882
ASTM F882
ASTM D883
ASTM E883
ASTM F883
ASTM
A884/A884M
ASTM
C884/C884M
ASTM D885
ASTM D888
ASTM C889
ASTM D891
ASTM D892
ASTM D893
ASTM F895
ASTM D896
ASTM D897
ASTM D898
ASTM D899
ASTM F899
ASTM C901
REV A
ASTM D902
ASTM D903
ASTM D905

ASTM D906
ASTM F906
ASTM
A907/A907M
ASTM A908
ASTM D909
ASTM D910
ASTM E911
ASTM D912
ASTM F912
ASTM F912M
ASTM C913
ASTM D914
ASTM C916
ASTM F917
ASTM D918
ASTM F918
ASTM F919
ASTM F920
ASTM C921
ASTM F921
ASTM D922
REV A
ASTM C923
ASTM D923
ASTM C924
ASTM D924
ASTM F925
ASTM D926
ASTM D929
ASTM C930
ASTM E930
ASTM
C931/C931M
ASTM C932
REV A
ASTM E934

ASTM C937
ASTM D937
ASTM D938
ASTM C939
ASTM F940
ASTM F941
ASTM C942
ASTM D942
ASTM D943
ASTM D945
ASTM D946
ASTM F949
ASTM D950
ASTM D951
ASTM C952
ASTM F952
ASTM D953
ASTM C954
ASTM D955
ASTM F957
ASTM F959M
REV A
ASTM
C960/C960M
ASTM F960
ASTM C964
ASTM F965
ASTM C966
ASTM A967
ASTM D968
ASTM C969
ASTM D969
ASTM E969
ASTM D971
REV A

ASTM D972
ASTM D974
ASTM D975
ASTM D976
ASTM C977
ASTM D977
ASTM D979
ASTM C989
ASTM E990
ASTM D991
ASTM F993
ASTM D994
ASTM C995
ASTM D995
REV B
ASTM D996
ASTM D1000
ASTM F1000
ASTM E1001
REV A
ASTM C1002
ASTM D1002
ASTM D1003
ASTM D1004
REV A
ASTM E1004
ASTM D1005
ASTM D1006
ASTM D1013
ASTM D1014
ASTM F1014
ASTM C1015
ASTM
C1017/C1017M
ASTM C1018
ASTM D1018

ASTM C1019
REV B
ASTM E1019
ASTM F1021
ASTM F1023
ASTM F1026
ASTM C1029
ASTM D1030
ASTM C1036
ASTM E1042
ASTM D1043
ASTM E1043
ASTM D1044
ASTM E1044
ASTM C1047
ASTM D1047
ASTM F1047
ASTM C1048
REV B
ASTM D1048
ASTM D1049
ASTM D1050
ASTM D1052
ASTM C1053
ASTM D1053
REV A
ASTM D1054
ASTM D1055
ASTM D1056
ASTM D1059
ASTM D1062
ASTM C1063
ASTM
C1064/C1064M
ASTM D1064
ASTM E1064

ASTM F1066
ASTM D1067
ASTM D1068
ASTM C1071
ASTM C1072
REV A
ASTM D1073
ASTM D1075
ASTM D1076
ASTM C1077
ASTM D1078
ASTM F1078
ASTM F1079
ASTM F1083
ASTM D1084
ASTM C1089
ASTM D1091
ASTM E1091
ASTM D1092
ASTM D1093
ASTM D1094
ASTM E1094
ASTM E1095
ASTM E1098
ASTM E1099
ASTM C1107
ASTM C1116
ASTM D1117
ASTM D1119
ASTM E1119
ASTM D1120
ASTM D1121
ASTM D1122
REV A
ASTM D1123
ASTM F1123
ASTM D1125
ASTM D1126
ASTM C1136
ASTM F1138
ASTM D1139

ASTM D1140
ASTM D1141
ASTM D1142
ASTM D1143
ASTM F1145
ASTM D1146
ASTM E1146
ASTM D1149
ASTM D1151
ASTM D1153
ASTM F1156
ASTM E1157
ASTM D1159
ASTM D1160
ASTM C1161
ASTM F1166
REV A
ASTM D1169
ASTM D1171
ASTM D1172
ASTM D1176
ASTM D1177
ASTM D1179
ASTM E1182
ASTM F1182
ASTM D1183
ASTM D1184
ASTM D1185
REV A
ASTM D1186
ASTM D1188
ASTM D1190
ASTM F1192
ASTM D1193
ASTM D1194
ASTM D1199
ASTM D1200

ASTM D1203
ASTM D1204
ASTM D1208
ASTM D1209
ASTM D1210
ASTM D1214
ASTM D1217
ASTM F1217
ASTM D1218
ASTM E1225
ASTM D1227
ASTM D1229
ASTM E1237
ASTM F1237
ASTM D1238
ASTM D1241
ASTM D1242
REV A
ASTM F1242
ASTM D1246
ASTM E1249
ASTM D1250
ASTM D1250
VOL I
ASTM D1250
VOL II
ASTM D1250
VOL III
ASTM D1250
VOL IV
ASTM D1250
VOL V
ASTM E1251
ASTM D1252
ASTM D1253
ASTM D1259
ASTM D1263

ASTM D1250
VOL VI
ASTM D1250
VOL VII
ASTM D1250
VOL VIII
ASTM D1250
VOL IX
ASTM D1264
ASTM E1264
ASTM D1266
ASTM F1267
ASTM D1272
ASTM D1275
REV A
ASTM D1250
VOL X
ASTM D1250
VOL XI/XII
ASTM D1250
VOL XIII
ASTM D1250
VOL XIV
ASTM F1275
ASTM D1287
ASTM C1289
ASTM D1293
ASTM D1296
ASTM D1298
ASTM D1301
ASTM D1306
ASTM D1308
ASTM D1310
ASTM F1312
ASTM D1319
ASTM E1320
ASTM D1321
ASTM D1322

ASTM F1325
ASTM D1327
REV A
ASTM D1330
ASTM F1332
ASTM D1335
ASTM D1338
ASTM D1343
ASTM F1344
ASTM F1347
ASTM D1348
ASTM D1349
ASTM D1353
ASTM F1360
ASTM D1363
ASTM D1364
ASTM D1366
ASTM D1369
ASTM F1370
ASTM D1385
ASTM D1386
ASTM D1388
ASTM E1392
ASTM D1394
ASTM D1397
ASTM D1398
ASTM D1400
ASTM D1401
ASTM D1403
ASTM D1405
ASTM D1414
ASTM D1415
ASTM E1417
ASTM D1418
ASTM D1423
ASTM D1424
ASTM D1426
ASTM D1430

ASTM D1435
ASTM E1441
ASTM E1444
REV A
ASTM D1448
ASTM F1448
REV A
ASTM D1452
ASTM D1456
ASTM E1456
ASTM D1458
ASTM D1461
ASTM D1475
ASTM D1476
ASTM D1478
ASTM D1483
ASTM D1488
ASTM D1489
ASTM D1493
ASTM D1494
ASTM D1499
ASTM D1500
ASTM D1505
ASTM D1506
ASTM D1509
ASTM D1510
ASTM D1512
ASTM D1513
REV A
ASTM D1516
ASTM D1525
ASTM D1527
ASTM D1533
ASTM D1535
ASTM D1544
ASTM D1545
ASTM D1552
ASTM D1555
ASTM D1556
ASTM D1557
ASTM D1562

ASTM E1570
ASTM D1577
ASTM D1578
ASTM D1579
ASTM D1586
ASTM D1587
ASTM D1596
ASTM D1598
ASTM D1599
ASTM D1600
ASTM F1602
ASTM D1603
ASTM F1603
ASTM F1604
ASTM D1607
ASTM D1608
ASTM D1611
ASTM D1613
ASTM D1614
ASTM D1617
ASTM D1619
ASTM D1621
ASTM D1622
ASTM D1623
ASTM D1625
ASTM E1626
ASTM D1630
ASTM D1631
ASTM D1632
ASTM D1633
ASTM D1639
ASTM D1640
ASTM D1646
ASTM D1647
ASTM D1652
ASTM D1653

ASTM D1654
ASTM D1667
ASTM F1667
ASTM D1668
REV A
ASTM E1672
ASTM D1675
ASTM D1687
ASTM D1688
ASTM D1691
ASTM D1693
ASTM F1700
ASTM D1708
ASTM D1709
ASTM D1710
ASTM D1718
ASTM D1719
ASTM D1720
ASTM D1722
ASTM D1726
ASTM D1729
ASTM D1730
ASTM D1732
ASTM D1734
ASTM D1735
ASTM D1740
ASTM D1742
ASTM E1742
ASTM D1746
ASTM D1747
ASTM D1748
ASTM D1751
ASTM D1752
ASTM D1763
ASTM D1765
ASTM D1776
ASTM D1779

ASTM D1780
ASTM D1781
ASTM F1783
ASTM D1784
REV A
ASTM D1785
ASTM D1790
ASTM F1793
ASTM D1796
ASTM D1799
ASTM D1813
ASTM D1814
ASTM D1815
ASTM D1824
ASTM D1830
ASTM D1831
ASTM D1840
ASTM D1845
ASTM D1849
ASTM D1854
ASTM D1857
ASTM D1863
ASTM D1864
ASTM D1868
ASTM D1869
ASTM D1875
ASTM D1881
ASTM D1883
ASTM D1889
ASTM D1890
ASTM D1894
ASTM D1895
ASTM D1907
ASTM D1917
ASTM D1921
ASTM D1922
REV A
ASTM D1928

ASTM D1929
ASTM D1932
ASTM D1943
ASTM D1950
ASTM D1951
ASTM D1952
ASTM D1954
ASTM D1957
ASTM D1959
ASTM D1960
ASTM D1962
ASTM D1963
ASTM D1964
ASTM D1965
ASTM D1968
REV A
ASTM D1974
ASTM D1980
ASTM D1983
ASTM
D2010/D2010
M
ASTM D2013
REV A
ASTM D2022
ASTM D2024
ASTM D2026
ASTM D2027
ASTM D2028
ASTM D2029
ASTM E2030
ASTM D2036
ASTM D2041
ASTM D2042
ASTM D2060
ASTM D2069

ASTM E2072
ASTM D2073
ASTM E2073
ASTM D2084
ASTM D2091
ASTM D2092
ASTM D2096
ASTM D2098
ASTM D2099
ASTM D2103
ASTM D2104
ASTM D2105
ASTM D2106
ASTM D2109
ASTM D2111
ASTM D2112
ASTM D2113
ASTM D2115
ASTM D2116
ASTM D2122
ASTM D2126
ASTM D2136
ASTM D2137
ASTM D2152
ASTM D2156
ASTM D2161
ASTM D2162
ASTM D2165
ASTM D2167
ASTM D2168
ASTM D2170
ASTM D2171

ASTM D2172
ASTM D2176
REV A
ASTM D2178
REV A
ASTM D2194
ASTM D2196
ASTM D2197
ASTM D2200
ASTM D2207
ASTM D2208
ASTM D2209
ASTM D2210
ASTM D2212
ASTM D2213
ASTM D2216
ASTM D2217
ASTM D2221
ASTM D2227
ASTM D2228
ASTM D2235
REV A
ASTM D2239
ASTM D2240
ASTM D2241
ASTM D2243
ASTM D2244
ASTM D2245
ASTM D2247
ASTM D2256
ASTM D2257
ASTM D2258
ASTM D2265
ASTM D2266
ASTM D2268
ASTM D2270
ASTM D2272
ASTM D2273

ASTM D2274
ASTM D2276
ASTM D2282
ASTM D2287
ASTM D2290
ASTM D2291
ASTM D2303
ASTM D2310
ASTM D2321
ASTM D2322
ASTM D2330
ASTM D2343
ASTM
D2344/D2344
M
ASTM D2346
ASTM D2350
ASTM D2360
ASTM D2369
ASTM D2370
ASTM D2371
ASTM D2372
ASTM D2382
ASTM D2386
ASTM D2392
ASTM D2395
ASTM D2397
ASTM D2412
REV A
ASTM D2414
REV A
ASTM D2419
ASTM D2434
ASTM D2440
ASTM D2444

ASTM D2447
ASTM D2455
ASTM D2457
ASTM D2464
ASTM D2466
ASTM D2467
ASTM D2468
REV A
ASTM D2471
ASTM D2472
ASTM D2481
ASTM D2486
ASTM D2487
ASTM D2488
ASTM D2492
ASTM D2500
ASTM D2503
ASTM D2510
ASTM D2511
ASTM D2512
ASTM D2513
ASTM D2517
ASTM D2519
ASTM D2520
ASTM D2532
ASTM D2533
ASTM D2556
REV A
ASTM D2559
ASTM D2563
ASTM D2564
REV A
ASTM D2565
ASTM D2572
ASTM D2573
ASTM D2579
ASTM D2580
ASTM D2582

ASTM D2583
ASTM D2584
ASTM D2595
ASTM D2596
ASTM D2603
ASTM D2609
ASTM D2617
ASTM D2622
ASTM D2625
ASTM D2626
REV B
ASTM D2628
ASTM D2632
ASTM D2649
ASTM D2651
ASTM D2657
ASTM D2661
REV A
ASTM D2662
REV A
ASTM D2665
ASTM D2666
REV A
ASTM D2667
ASTM D2670
ASTM D2671
ASTM D2672
REV A
ASTM D2680
REV A
ASTM D2683
ASTM D2686
ASTM D2697
ASTM D2698
ASTM D2699
ASTM D2700
ASTM D2702

ASTM D2709
ASTM D2714
ASTM D2724
ASTM D2726
ASTM D2729
REV A
ASTM D2732
ASTM D2734
ASTM D2737
ASTM D2751
REV A
ASTM D2766
ASTM D2774
ASTM D2794
ASTM D2800
ASTM D2802
ASTM D2803
ASTM D2804
ASTM D2805
REV A
ASTM D2807
ASTM D2821
ASTM D2822
ASTM D2823
ASTM D2824
ASTM D2835
ASTM D2837
REV A
ASTM D2842
ASTM D2843
ASTM
D2846/D2846
M
ASTM D2852
ASTM D2854
ASTM D2855
ASTM D2856

ASTM D2859
ASTM
D2860/D2860
M
ASTM D2862
ASTM D2863
ASTM D2867
ASTM D2868
ASTM D2880
ASTM D2885
ASTM D2887
ASTM D2896
ASTM D2905
ASTM D2922
ASTM D2935
ASTM D2937
ASTM D2939
ASTM D2940
ASTM D2941
ASTM D2942
ASTM D2949
ASTM D2950
ASTM D2983
ASTM D2989
ASTM D2990
ASTM D2992
ASTM D2995
ASTM D2996
ASTM D2997
ASTM D3000
REV A
ASTM D3013
ASTM D3014
ASTM D3017

ASTM D3018
ASTM D3032
ASTM D3034
ASTM D3035
ASTM
D3039/D3039
M
ASTM D3045
ASTM D3056
ASTM D3061
ASTM D3064
ASTM D3065
ASTM D3069
ASTM D3070
ASTM D3078
ASTM D3090
ASTM D3091
ASTM D3092
ASTM D3097
ASTM D3120
ASTM D3122
ASTM D3137
ASTM D3138
ASTM D3139
ASTM D3145
ASTM D3147
ASTM D3159
ASTM D3161
REV A
ASTM D3162
ASTM D3166
ASTM D3168
ASTM D3170
ASTM D3171
ASTM D3174
ASTM D3175
REV A
ASTM D3177
ASTM D3182
ASTM D3183

ASTM D3186
ASTM D3212
REV A
ASTM D3222
ASTM D3223
ASTM D3227
ASTM D3228
ASTM D3230
ASTM D3231
ASTM D3240
ASTM D3241
ASTM D3242
ASTM D3249
ASTM D3257
ASTM D3261
ASTM D3266
ASTM D3268
ASTM D3269
ASTM D3271
ASTM D3272
ASTM D3273
ASTM D3274
ASTM D3275
ASTM D3278
ASTM D3280
ASTM D3282
ASTM D3295
ASTM D3299
ASTM D3307
ASTM D3308

ASTM D3309
REV A
ASTM D3320
ASTM D3329
ASTM
D3330/D3330
M
ASTM D3335
REV A
ASTM D3336
ASTM D3337
ASTM D3338
ASTM D3343
ASTM D3363
ASTM D3368
ASTM D3369
ASTM D3370
REV A
ASTM D3372
ASTM D3373
ASTM D3374
ASTM D3379
ASTM D3381
ASTM D3385
ASTM D3386
ASTM D3389
ASTM D3400
ASTM D3401
ASTM
D3410/D3410
M
ASTM D3417
ASTM D3418
ASTM D3432
ASTM D3441
ASTM D3443
ASTM D3447
REV A
ASTM D3450

ASTM D3452
ASTM D3453
ASTM D3462
ASTM D3464
ASTM
D3479/D3479
M
ASTM D3482
ASTM D3487
ASTM D3492
ASTM D3495
ASTM D3500
ASTM D3505
ASTM D3511
REV A
ASTM D3517
ASTM
D3518/D3518
M
ASTM
D3529/D3529
M
ASTM
D3530/D3530
M
ASTM D3531
ASTM D3532
ASTM D3539
ASTM D3544
ASTM D3545
ASTM D3551
ASTM D3552
ASTM D3553
ASTM D3559
ASTM D3567
ASTM D3574
ASTM D3575
ASTM D3577
ASTM D3578
REV A
ASTM D3579

ASTM D3595
ASTM D3611
ASTM D3617
ASTM D3623
REV A
ASTM D3624
REV A
ASTM D3634
ASTM
D3652/D3652
M
ASTM
D3654/D3654
M
ASTM D3656
ASTM D3666
ASTM D3667
ASTM D3668
ASTM D3677
ASTM D3691
REV A
ASTM D3699
ASTM D3701
REV A
ASTM D3703
ASTM
D3715/D3715
M
ASTM D3718
REV A
ASTM D3725
ASTM D3732
ASTM D3734
ASTM D3738
ASTM D3740
ASTM
D3759/D3759
M
ASTM D3761
ASTM D3767

ASTM D3772
ASTM D3773
ASTM D3774
ASTM D3775
ASTM D3776
ASTM D3790
ASTM D3792
ASTM D3800
ASTM
D3811/D3811M
ASTM
D3813/D3813
M
ASTM
D3815/D3815
M
ASTM D3828
ASTM D3832
ASTM
D3833/D3833
M
ASTM D3839
REV A
ASTM D3841
ASTM D3846
ASTM D3850
ASTM D3878
ASTM D3887
ASTM D3892
ASTM D3909
REV B
ASTM D3910
ASTM D3916
ASTM D3921
ASTM D3924
ASTM D3925
ASTM D3935
ASTM D3941
ASTM D3948
REV A

ASTM D3950
ASTM D3951
ASTM D3953
ASTM D3960
ASTM D3990
ASTM D4000
REV A
ASTM D4004
ASTM D4006
ASTM D4017
REV A
ASTM D4018
ASTM D4019
REV A
ASTM D4020
REV A
ASTM D4022
ASTM D4047
ASTM D4048
ASTM D4052
ASTM D4057
ASTM D4060
ASTM D4065
ASTM D4066
REV A
ASTM D4067
ASTM D4075
ASTM D4080
ASTM D4083
ASTM D4092
ASTM D4097
REV A
ASTM D4101
ASTM D4102
ASTM D4126
ASTM D4157

ASTM D4169
ASTM D4172
ASTM D4175
ASTM D4176
ASTM D4177
ASTM D4181
ASTM D4203
ASTM D4214
ASTM D4216
ASTM D4220
ASTM D4225
ASTM D4239
ASTM D4253
ASTM D4254
ASTM
D4255/D4255
M
ASTM D4263
ASTM D4268
ASTM D4287
ASTM D4289
ASTM D4294
ASTM D4300
REV A
ASTM D4306
ASTM D4317
ASTM D4318
ASTM D4325
ASTM D4338
ASTM D4350
ASTM D4355
ASTM D4377
ASTM D4388
ASTM D4397
ASTM D4402

ASTM D4417
ASTM D4427
ASTM D4429
ASTM D4434
ASTM D4442
ASTM D4444
ASTM D4473
REV A
ASTM D4479
ASTM D4491
REV A
ASTM D4500
ASTM D4507
REV A
ASTM D4530
ASTM D4533
ASTM D4549
ASTM D4586
ASTM D4601
ASTM D4615
ASTM D4617
ASTM D4624
ASTM D4625
ASTM D4628
ASTM D4629
ASTM D4634
ASTM D4636
ASTM D4637
ASTM D4643
ASTM D4653
ASTM D4655
ASTM D4673
ASTM D4675
ASTM D4683

ASTM D4684
ASTM D4689
ASTM D4690
ASTM D4701
ASTM D4704
ASTM D4705
ASTM
D4727/D4727
M
ASTM D4737
REV A
ASTM D4741
ASTM D4745
ASTM D4749
ASTM D4751
REV A
ASTM D4759
ASTM D4783
REV A
ASTM D4786
ASTM D4791
ASTM D4801
ASTM D4802
ASTM D4807
ASTM D4808
ASTM D4809
ASTM D4814
REV A
ASTM D4815
ASTM D4831
ASTM D4833
ASTM D4857
ASTM D4858

ASTM D4859
ASTM D4863
ASTM D4892
ASTM D4897
ASTM D4898
ASTM D4919
ASTM D4927
ASTM D4928
ASTM D4951
ASTM D4952
ASTM D4956
ASTM D4976
REV B
ASTM D4985
REV A
ASTM D5006
ASTM D5034
ASTM D5035
ASTM D5040
ASTM
D5052/D5052
M
ASTM D5053
ASTM D5059
ASTM D5104
ASTM D5105
ASTM
D5118/D5118M
ASTM D5119
ASTM D5151
ASTM D5168
ASTM D5185
ASTM D5191
ASTM D5204
ASTM D5205

ASTM D5213
ASTM
D5229/D5229
M
ASTM D5300
ASTM D5304
ASTM
D5330/D5330
M
ASTM D5436
ASTM D5445
REV A
ASTM
D5448/D5448
M
ASTM
D5450/D5450
M
ASTM D5452
ASTM D5470
ASTM
D5486/D5486
M REV A
ASTM D5632
ASTM D5727
ASTM D5834
ASTM D5948
ASTM D5960
ASTM D6012
ASTM D6017
ASTM D6018
ASTM D6020
ASTM
D6039/D6039
M
ASTM D6075
ASTM D6076
ASTM D6107
ASTM D6116

ASTM D6183
ASTM D6193
ASTM D6199
ASTM D6576
AWS B2.1
AWS
C1.1M/C1.1
AWS C1.3
AWS D1.1
AWS D1.2
AWS D1.3
AWS D1.4
AWS A5.21
AWS A2.4
AWS B2.2
AWS C2.16
AWS A3.0
AWS C3.2
AWS C3.4
AWS C3.5
AWS C3.6
AWS C3.7
AWS D3.6M
AWS
A4.2M/A4.2
AWS A4.3
AWS B4.0M
AWS A5.1
AWS A5.01
AWS A5.2
AWS
A5.3/A5.3M
AWS A5.4
AWS A5.5
AWS A5.6
AWS A5.7
AWS A5.8
AWS A5.9
AWS
A5.10/A5.10M
AWS
A5.11/A5.11M

AWS
A5.12/A5.12M
AWS A5.13
AWS
A5.14/A5.14M
AWS A5.15
AWS A5.16
AWS
A5.17/A5.17M
AWS
A5.18/A5.18M
AWS A5.19
AWS A5.20
AWS A5.22
AWS
A5.23/A5.23M
AWS A5.24
AWS
A5.25/A5.25M
AWS
A5.26/A5.26M
AWS A5.28
AWS A5.29
AWS A5.30
AWS C5.4
AWS C5.5
AWS
D9.1M/D9.1
AWS D14.1
AWS
D14.3/D14.3M
AWS D14.6
AWS D15.1
AWS Z49.1
AWWA M16
AWWA M11
AWWA C205
AWWA C702
AWWA M23
AWWA D100
AWWA D102

AWWA
C104/A21.4
AWWA
C105/A21.5
AWWA
C110/A21.10
AWWA
C111/A21.11
AWWA
C115/A21.15
AWWA
C151/A21.51
AWWA
C153/A21.53
AWWA C200
AWWA C203
AWWA C206
AWWA C207
AWWA C208
AWWA C209
AWWA C210
AWWA C213
AWWA C214
AWWA B300
AWWA C300
AWWA B301
AWWA C301
AWWA C302
AWWA C303
AWWA C400
AWWA C402
AWWA C403
AWWA C500
AWWA B502
AWWA C502
AWWA C503
AWWA C504
AWWA C508

AWWA C509
AWWA C510
AWWA C511
AWWA C550
AWWA C600
AWWA C603
AWWA C606
AWWA C651
AWWA C652
AWWA C700
AWWA C701
AWWA C703
AWWA C704
AWWA C800
AWWA C900
AWWA C901
BHMA A156.1
BHMA A156.2
BHMA A156.3
BHMA A156.4
BHMA A156.5
BHMA A156.6
BHMA A156.7
BHMA A156.8
BHMA A156.9
BHMA
A156.10
BHMA A156.11
BHMA
A156.12
BHMA
A156.13
BHMA
A156.14
BHMA
A156.15
BHMA
A156.16
BHMA
A156.17
BHMA
A156.18

BHMA
A156.19
BHMA
A156.20
BHMA
A156.21
BHMA
A156.23
BHMA
A156.24
BOCA
APPENDIX A
NPC
BOCA
APPENDIX B
NPC
BOCA
APPENDIX C
NPC
BOCA
APPENDIX D
NPC
BOCA
APPENDIX E
NPC
BOCA
APPENDIX F
NPC
BOCA INDEX
NPC
BOCA
ARTICLE 1
NPC
BOCA
ARTICLE 2
NPC
BOCA
ARTICLE 3
NPC
BOCA
ARTICLE 4
NPC

BOCA
ARTICLE 5
NPC
BOCA
ARTICLE 6
NPC
BOCA
ARTICLE 7
NPC
BOCA
ARTICLE 8
NPC
BOCA
ARTICLE 9
NPC
BOCA
ARTICLE 10
NPC
BOCA
ARTICLE 11
NPC
BOCA
ARTICLE 12
NPC
BOCA
ARTICLE 13
NPC
BOCA
ARTICLE 14
NPC
BOCA
ARTICLE 15
NPC
BOCA
ARTICLE 16
NPC
BOCA
ARTICLE 17
NPC
BOCA
ARTICLE 18
NPC
BOCA CONT
NPC 1990

BOCA CONT
NPC 1990
BOOK
CAMI B7.7
CGSB 39-GP38A
CI/CORDAGE
1201
CI/CORDAGE
1301
CI/CORDAGE
1302A
CI/CORDAGE
1303
CI/CORDAGE
1304
CI/CORDAGE
1305
CI/CORDAGE
1306
CI/CORDAGE
1307
CI/CORDAGE
1308
CISPI 301
CSI MP-2-1
CSI MP-2-2
CSI MP-2-3
CTI ATC-105
DHI A115.7
EIA SSB-1-C
EIA J-STD-006
EIA 455-83A
EIA EIA/TIA455-29A
EIA TIA/EIA455-171A
EIA 557-1

EIA JESD78
EIA EIA-170
EIA 227-A
EIA TIA/EIA232-F
EIA 267-C
EIA 274-D
EIA 278-B
EIA 297-A
EIA 310-D
EIA 343-A
EIA 358-C
EIA 359-A
EIA 359-A-1
EIA 364-07B
EIA 364-11A
EIA 364-35A
EIA 364-56A
EIA EIA-36405B
EIA EIA-36408B
EIA EIA-36424B
EIA EIA-36425C
EIA EIA-36429B
EIA EIA-36437B
EIA EIA-36438B
EIA EIA-36440B
EIA EIA-36441C
EIA EIA-36454A
EIA EIA-36471A
EIA EIA-36499

EIA EIA-364104A
EIA EIA-364105
EIA 385
EIA 412-A
EIA EIA-440-A
EIA 455-34
EIA 455-65
EIA 455-174
EIA EIA-45521A
EIA EIA-45523A
EIA EIA-45526A
EIA EIA-45533A
EIA EIA-45588
EIA EIA-45591
EIA EIA-455179
EIA EIA/TIA455-3A
EIA EIA/TIA455-6B
EIA EIA/TIA455-14A
EIA EIA/TIA455-15A
EIA EIA/TIA455-22B
EIA EIA/TIA455-24
EIA EIA/TIA455-30B
EIA EIA/TIA455-37A
EIA EIA/TIA455-42A

EIA EIA/TIA455-46A
EIA EIA/TIA455-47B
EIA EIA/TIA455-48B
EIA EIA/TIA455-51A
EIA EIA/TIA455-53A
EIA EIA/TIA455-58A
EIA EIA/TIA455-60A
EIA EIA/TIA455-62A
EIA EIA/TIA455-77
EIA EIA/TIA455-78A
EIA EIA/TIA455-82B
EIA EIA/TIA455-127
EIA EIA/TIA455-167A
EIA EIA/TIA455-173
EIA EIA/TIA455-188
EIA RS-455-86
EIA TIA/EIA455-2C
EIA TIA/EIA455-4B
EIA TIA/EIA455-5B
EIA TIA/EIA455-16A
EIA TIA/EIA455-20A
EIA TIA/EIA455-25B

EIA TIA/EIA455-28C
EIA TIA/EIA455-31C
EIA TIA/EIA455-32A
EIA TIA/EIA455-39B
EIA TIA/EIA455-41A
EIA TIA/EIA455-43A
EIA TIA/EIA455-44B
EIA TIA/EIA455-50B
EIA TIA/EIA455-54B
EIA TIA/EIA455-55C
EIA TIA/EIA455-56B
EIA TIA/EIA455-57B
EIA TIA/EIA455-58B
EIA TIA/EIA455-67
EIA TIA/EIA455-75A
EIA TIA/EIA455-76
EIA TIA/EIA455-80B
EIA TIA/EIA455-81B
EIA TIA/EIA455-84B
EIA TIA/EIA455-87B
EIA TIA/EIA455-100A
EIA TIA/EIA455-104A

EIA TIA/EIA455-107A
EIA TIA/EIA455-168A
EIA TIA/EIA455-175A
EIA TIA/EIA455-176
EIA TIA/EIA455-177A
EIA TIA/EIA455-178A
EIA TIA/EIA455-184
EIA 463-A
EIA TIA/EIA465-A
EIA TIA/EIA466-A
EIA 469-C
EIA TIA/EIA470-B
EIA RS-478
EIA 483
EIA RS-487
EIA 494-B
EIA 512
EIA 512-1
EIA 520A000A
EIA 520AAAAA
EIA 520AAABA
EIA 520C000
EIA 520CA00A
EIA 520CAAAA

EIA 520CAABA
EIA 520CAACA
EIA 520CAADA
EIA TIA-5264A
EIA TIA/EIA526-10
EIA TIA/EIA526-14A
EIA 554-A
EIA 557-A
EIA 584
EIA 585
EIA TIA/EIA598-A
EIA TIA/EIA604
EIA 649
EIA IEEE/EIA
12207.1
EIA IEEE/EIA
12207.2
EIA EIA5200000-D
ICEA S-70-547
ICEA S-80-576
IEC 60086-1
IEC 60086-2
IEC 60774-1
IEC 60843-1
IEC 60843-3
IEC 61077
IEC 61105

IEEE 1
IEEE SI 10
IEEE C12.1
IEEE C12.4
IEEE C12.7
IEEE C12.11
IEEE 32
IEEE Y32.9
IEEE C37.09
IEEE C37.09A
SUPP
IEEE C37.09C
SUPP
IEEE C37.09E
SUPP
IEEE C37.09G
SUPP
IEEE C37.13
IEEE C37.20.1
IEEE C37.20.2
IEEE C37.20.3
IEEE C37.30
IEEE C37.90
IEEE C37.90.1
IEEE 43
IEEE 45
IEEE 48
IEEE C57.12.00
IEEE C57.12.01
IEEE C57.12.80
IEEE C57.12.90
IEEE C57.12.91
IEEE C57.13

IEEE C57.94
IEEE C62.1
IEEE C62.11
IEEE C62.41
IEEE C63.14
IEEE 81
IEEE 91
IEEE 91A
IEEE C95.1
IEEE C95.3
IEEE 112
IEEE 145
IEEE 152
IEEE 176
IEEE 260.1
IEEE 280
IEEE 299
IEEE 315
IEEE 315A
SUPP
IEEE 383
IEEE 386
IEEE 400
IEEE 404
IEEE 421.1
IEEE 432
IEEE 455
IEEE 521
IEEE 602
IEEE 686

IEEE 945
IEEE 991
IEEE 1003.1
IEEE 1076
IEEE 12207.0
IEEE 12207.1
IEEE 12207.2
IPC J-STD-004
IPC J-STD-005
IPC J-STD-006
IPC FC-233A
IPC TM-650
2.3.12
IPC T-50F
IPC EG-140
IPC SG-141
IPC A-142
IPC QF-143
IPC FC-231C
IPC FC-232C
IPC FC-241C
IPC D-322
IPC NC-349
IPC D-350D
IPC D-356A
IPC DW-425A
IPC TM-650
IPC TM-650
MANUAL
IPC TM-650
2.1.7
IPC TM-650
2.1.9

IPC TM-650
2.3.1.1
IPC TM-650
2.3.4.2
IPC TM-650
2.3.4.3
IPC TM-650
2.3.7.1
IPC TM-650
2.3.9
IPC TM-650
2.3.10
IPC TM-650
2.3.16
IPC TM-650
2.3.16.1
IPC TM-650
2.3.17
IPC TM-650
2.3.17.2
IPC TM-650
2.3.18
IPC TM-650
2.3.19
IPC TM-650
2.3.32
IPC TM-650
2.3.33
IPC TM-650
2.3.34
IPC TM-650
2.3.35
IPC TM-650
2.4.4
IPC TM-650
2.4.4.1
IPC TM-650
2.4.8
IPC TM-650
2.4.8.2
IPC TM-650
2.4.24
IPC TM-650
2.4.25

IPC TM-650
2.4.38
IPC TM-650
2.4.39
IPC TM-650
2.4.41
IPC TM-650
2.4.41.1
IPC TM-650
2.5.1
IPC TM-650
2.5.5.2
IPC TM-650
2.5.5.5
IPC TM-650
2.5.5.5.1
IPC TM-650
2.5.5.3
IPC TM-650
2.5.6
IPC TM-650
2.5.6.2
IPC TM-650
2.5.17.1
IPC TM-650
2.5.28
IPC TM-650
2.6.1
IPC TM-650
2.6.2.1
IPC TM-650
2.6.3
IPC TM-650
2.6.3.3
IPC TM-650
2.6.17
IPC QL-653A
IPC SM-840C
IPC 2221
IPC 2223
ISA MC96.1
ISO 5-4
ISO 46
ISO 54

ISO 594-1
ISO 594-2
ISO 668
ISO 830
ISO 1000
ISO 1122-1
ISO 1161
ISO 1224
ISO 1496-1
ISO 1496-2
ISO 1496-3
ISO 3290
ISO 3573
ISO 3574
ISO 3575
ISO 3861
ISO 4960
ISO 4995
ISO 4996
ISO 4997
ISO 4998
ISO 4999
ISO 5000
ISO 5001
ISO 5002
ISO 5950
ISO 5951
ISO 5952
ISO 5954

ISO 6316
ISO 6317
ISO 6328
ISO 6932
ISO 7886-1
ISO 8537
ISO 8879
ISO 9000
ISO 9000-2
ISO 9000-3
ISO 9000-4
ISO 9001
ISO 9004
ISO 9004-2
ISO 9004-3
ISO 9004-4
ISO 10005
ISO 10011-1
ISO 10011-2
ISO 10011-3
ISO 10012-1
ISO 11319
MSS SP-6
MSS SP-84
MSS SP-25
MSS SP-45
MSS SP-55

MSS SP-58
MSS SP-61
MSS SP-67
MSS SP-69
MSS SP-70
MSS SP-71
MSS SP-72
MSS SP-78
MSS SP-80
MSS SP-81
MSS SP-83
MSS SP-85
MSS SP-88
MSS SP-89
MSS SP-104
MSS SP-110
NCSL Z540-1
NEMA BU 1
NEMA EW 1
NEMA FU 1
NEMA KS 1
NEMA PB 1
NEMA DC 3
NEMA WC 7
NEMA MG 11
NEMA FB 1
NEMA ICS 1
NEMA LA 1
NEMA LI 1
NEMA MG 1
NEMA OS 1
NEMA RN 1
NEMA ST 1
NEMA TR 1
NEMA VE 1
NEMA WD 1
NEMA ICS 2
NEMA PB 2
NEMA PB 2.1

NEMA SG 2
NEMA TC 2
NEMA DC 3
NEMA HP 3
NEMA ICS 3
NEMA LD 3
NEMA LD 3.1
NEMA SG 3
NEMA TC 3
NEMA WC 3
NEMA HP 4
NEMA WC 66
NEMA WC 5
NEMA EW 6
NEMA TC 6
&8
NEMA WD 6
NEMA C78.390
NEMA MG 7
NEMA WC 8
NEMA TC 9
NEMA MG 10
NEMA C12.7
NEMA TC 13
NEMA TC 14
NEMA C18.1M
NEMA ST 20
NEMA SM 23
NEMA WC 26
NEMA C29.2
NEMA C37.32
NEMA C37.121
NEMA WC 52

NEMA WC 56
NEMA WC
63.1
NEMA WC
63.2
NEMA C78.2B1
NEMA C78.2B2
NEMA C78.2C1
NEMA C78.2C2
NEMA
C78.2D-1
NEMA
C78.2D-2
NEMA C78.2E1
NEMA C78.2E2
NEMA
C78.3A-1
NEMA C78.3A
NEMA C78.40
NEMA C78.41
NEMA C80.1
NEMA
C81.61A-1
NEMA
C81.61A-2
NEMA C82.4
NEMA C135.7
NEMA 250
NEMA MW
1000
NEMA WC
27500
NFPA 10
NFPA 11
NFPA 12
NFPA 13

NFPA 14
NFPA 15
NFPA 16
NFPA 17
NFPA 17A
NFPA 20
NFPA 24
NFPA 30
NFPA 30A
NFPA 31
NFPA 32
NFPA 37
NFPA 50
NFPA 54
NFPA 58
NFPA 70
NFPA 70B
NFPA 79
NFPA 80
NFPA 82
NFPA 86
NFPA 86D
NFPA 90A
NFPA 90B
NFPA 91
NFPA 96
NFPA 99
NFPA 101
NFPA 102
NFPA 211
NFPA 214
NFPA 252
NFPA 255
NFPA 261

NFPA 325
NFPA 385
NFPA 407
NFPA 409
NFPA 412
NFPA 414
NFPA 701
NFPA 780
NFPA 1221
NFPA 1500
NFPA 1901
NFPA 1914
NFPA 1931
NFPA 1961
NFPA 1963
(NFPA) T2.7.2
(NFPA) T2.9.16
(NFPA) T3.9.18
R1
(NFPA) T2.6.1
R2
(NFPA) T2.12.1
(NFPA)
T2.12.10
(NFPA) T2.13.4
(NFPA) T2.24.1
R1
(NFPA) T3.5.45
(NFPA)
B93.30M
(NFPA)
B93.114M
NSC A10.3
NSC A10.6
NSC Z41
NSF 1
NSF 7

NSF 2
NSF C-2
NSF 3
NSF 4
NSF 5
NSF 6
NSF 8E
NSF 12
NSF 14
NSF 18A
NSF 20
NSF 26
NSF 29
NSF 30
NSF 35
NSF 36
NSF 37
NSF 51
NSF 60
NSF 61
NWWDA I.S.1
NWWDA I.S.2
NWWDA I.S.4
NWWDA TM-5
NWWDA I.S.6
NWWDA TM-6
NWWDA TM-7
NWWDA TM-8
NWWDA TM-9
NWWDA TM10
PIMA IT3.604
RMA IP-7
RMA IP-20

RMA IP-22
RWMA BULL
16
SACMA SRM
1
SACMA SRM
2
SACMA SRM
3
SACMA SRM
4
SACMA SRM
5
SACMA SRM
17
SAE J 53
SAE J 10
SAE AS 115E
SAE AS 116E
SAE AS 117E
SAE AS 118E
SAE AS 119E
SAE AS 120E
SAE AS 153E
SAE AS 154D
SAE AS 155D
SAE AS 156D
SAE AS 157D
SAE AS 158D
SAE J 296
SAE J 366

SAE J 516
SAE J 517
SAE J 538
SAE J 598
SAE AS 621C
SAE AS 622C
SAE AS 623C
SAE AS 624C
SAE AS 625C
SAE AS 626C
SAE AS 627C
SAE AS 628C
SAE AS 629C
SAE AS 630C
SAE AS 631C
SAE AS 632C
SAE J 688
SAE J 690
SAE J 700
SAE J 20
SAE J 786A
SAE J 848
SAE J 992
SAE J 1231
SAE ARP
1257A
SAE J 1473
SAE ARP
1512A
SAE ARP 24C
SAE HIR
1622A
SAE Z26.1
SAE J 1926
SAE AMS
2300H
SAE MAM
2300B
SAE AMS
2481G
SAE J 30

SAE AMS
2680C
SAE AMS
2814F
SAE AMS
3054B
SAE AMS
3216F
SAE AMS
3598D
SAE AMS
3755B
SAE AMS
4064E
SAE AMS
4125J
SAE AMS
4140H
SAE AMS
4182F
SAE AMS
4215G
SAE AMS
4229D
SAE AMS
4313C
SAE AMS
4625G
SAE AMS
4930E
SAE AMS
4944F
SAE AMS
4967H
SAE AMS
5046B
SAE AMS
5047E
SAE AMS
5069F
SAE AMS
5221E
SAE AMS
5336F

SAE AMS
5338E
SAE AMS
5355G
SAE AMS
5387C
SAE AMS
5568F
SAE AMS
5569A
SAE AMS
5577H
SAE AMS
5581D
SAE AMS
5587E
SAE AMS
6264J
SAE AMS
6434E
SAE AMS
6457C
SAE AMS
6458H
SAE AMS
6461J
SAE AMS
7259D
SAE AMS
7276G
SAE AMS
7459C
SAE AS 7479A
SAE AMS
7730E
SAE AMS
7913A
SAE AMS-S7916A
SAE AS 7949A
SAE AS 9356B

SAE AS
150401 THRU
AS 150425
SAE J 78
SAE J 81
SAE J 88
SAE J 89
SAE J 96
SAE J 98
SAE AMS-HHG-101
SAE J 110
SAE J 121
SAE J 121M
SAE J 122
SAE J 123
SAE J 154
SAE J 159
SAE J 160
SAE J 163
SAE J 164
SAE J 180
SAE AMSSTD-182
SAE AMSSTD-183
SAE J 183
SAE AMSSTD-184
SAE J 184
SAE AMSSTD-185
SAE J 185
SAE J 198
SAE AMS-QQA-200A
SAE AMS-QQA-200/1
SAE AMS-QQA-200/2
SAE AMS-QQA-200/3
SAE AMS-QQA-200/4A

SAE AMS-QQA-200/5
SAE AMS-QQA-200/6A
SAE AMS-QQA-200/7A
SAE AMS-QQA-200/8
SAE AMS-QQA-200/9
SAE AMS-QQA-200/10
SAE AMS-QQA-200/11
SAE AMS-QQA-200/13A
SAE AMS-QQA-200/14
SAE AMS-QQA-200/15A
SAE AMS-QQA-200/16
SAE AMS-QQA-200/17
SAE J 209
SAE J 211/1
SAE J 222
SAE AMS-QQA-225A
SAE AMS-QQA-225/1A
SAE AMS-QQA-225/2
SAE AMS-QQA-225/3
SAE AMS-QQA-225/4
SAE AMS-QQA-225/5
SAE AMS-QQA-225/6A
SAE AMS-QQA-225/7

SAE AMS-QQA-225/8A
SAE AMS-QQA-225/9
SAE AMS-QQA-225/10
SAE J 238
SAE J 246
SAE AMS-QQA-250
SAE AMS-QQA-250/1
SAE AMS-QQA-250/2
SAE AMS-QQA-250/3
SAE AMS-QQA-250/4A
SAE AMS-QQA-250/5A
SAE AMS-QQA-250/6
SAE AMS-QQA-250/7
SAE AMS-QQA-250/8A
SAE AMS-QQA-250/9
SAE AMS-QQA-250/10
SAE AMS-QQA-250/11
SAE AMS-QQA-250/12
SAE AMS-QQA-250/13
SAE AMS-QQA-250/14
SAE AMS-QQA-250/15A
SAE AMS-QQA-250/18
SAE AMS-QQA-250/19

SAE AMS-QQA-250/20
SAE AMS-QQA-250/21A
SAE AMS-QQA-250/22A
SAE AMS-QQA-250/24A
SAE AMS-QQA-250/25A
SAE AMS-QQA-250/26A
SAE AMS-QQA-250/28A
SAE AMS-QQA-250/29
SAE AMS-QQA-250/30
SAE J 267
SAE AS 269H
SAE J 276
SAE AMS-QQN-290
SAE J 293
SAE J 297
SAE J 300
SAE J 318
SAE AMS-QQC-320
SAE J 321
SAE J 335
SAE J 336
SAE J 348
SAE J 350
SAE J 356
SAE J 360
SAE AMS-QQA-367
SAE J 369
SAE J 375
SAE J 376
SAE J 379

SAE J 380
SAE J 381
SAE J 382
SAE J 386
SAE AMSSTD-401
SAE J 403
SAE J 404
SAE J 423
SAE AMS-QQW-428
SAE J 429
SAE J 439A
SAE J 441
SAE AS 478K
SAE ARP 490E
SAE ARP 492C
SAE J 492
SAE J 506
SAE J 512
SAE J 513
SAE J 514
SAE J 518
SAE J 524
SAE J 525
SAE J 526
SAE J 530
SAE J 531
SAE J 532
SAE J 534
SAE J 537
SAE J 541
SAE J 553
SAE J 560
SAE J 561
SAE J 564
SAE J 565
SAE AS 568B
SAE J 573

SAE J 575
SAE J 576
SAE J 578
SAE J 583
SAE ARP 584B
SAE J 585
SAE J 586
SAE J 588
SAE J 589B
SAE J 592
SAE J 593
SAE J 594
SAE J 595
SAE ARP 598B
SAE ARP 603F
SAE AS 604D
SAE AS 611D
SAE AS 614B
SAE J 614
SAE J 636
SAE J 638
SAE J 645
SAE J 661
SAE J 663
SAE J 678
SAE J 680
SAE AS 681H
SAE J 682
SAE AS 683B
SAE J 683
SAE J 684
SAE AS 686A
SAE J 689
SAE J 694

SAE J 695
SAE J 697
SAE AMS-QQS-700
SAE J 701
SAE J 702
SAE J 704
SAE J 706
SAE J 712
SAE J 726
SAE J 727
SAE J 732
SAE J 739
SAE J 740
SAE J 741
SAE ARP 743B
SAE J 744
SAE J 753
SAE J 754A
SAE AS 755C
SAE J 759
SAE AMSSTD-753
SAE J 760
SAE AMS-QQS-763
SAE ARP 763
SAE J 765
SAE AS 782
SAE ARP 785A
SAE AIR 797E
SAE J 818
SAE J 820
SAE J 821
SAE J 833
SAE J 840
SAE J 843
SAE J 844
SAE J 845

SAE J 846
SAE J 847
SAE J 849
SAE J 858A
SAE ARP 868B
SAE AS 870D
SAE AS 871A
SAE J 872
SAE J 875
SAE ARP 891A
SAE AS 896B
SAE AS 897B
SAE J 898/ISO
6682
SAE J 899
SAE J 903
SAE ARP 908C
SAE J 910
SAE J 917
SAE J 919
SAE J 925
SAE J 928
SAE J 931
SAE AS 933B
SAE J 942
SAE AMS-G952A
SAE AS 954E
SAE AS 959B
SAE J 959
SAE J 964
SAE AS 970B
SAE AS 971B
SAE AS 972B
SAE AS 976
SAE AS 977
SAE ARP 982C
SAE J 985

SAE J 986
SAE J 987
SAE ARP 994
SAE J 994
SAE J 995
SAE AS 1001E
SAE AS 1002E
SAE AS 1003D
SAE AS 1004D
SAE AS 1005E
SAE AS 1006D
SAE AS 1007D
SAE AS 1008E
SAE AS 1009E
SAE AS 1010D
SAE J 1024
SAE J 1029
SAE AS 1031D
SAE AS 1032D
SAE AS 1033D
SAE AS 1034D
SAE AS 1035C
SAE AS 1036E
SAE AS 1037E
SAE AS 1038D

SAE AS 1039D
SAE AS 1040D
SAE J 1040
SAE AS 1043F
SAE J 1050
SAE J 1053
SAE AS 1055D
SAE J 1063
SAE J 1065
SAE J 1067
SAE AS 1072E
SAE J 1072
SAE AS 1073A
SAE J 1074
SAE J 1082
SAE J 1086
SAE J 1097
SAE J 1128
SAE AS 1132F
SAE J 1163
SAE J 1165
SAE J 1166
SAE ARP 1173
SAE J 1174
SAE AS 1177A
SAE J 1177
SAE ARP
1179C
SAE J 1180
SAE AS 1182B
SAE ARP
1185B

SAE J 1193
SAE ARP
1199B
SAE AS 1227B
SAE AIR 1228
SAE J 1234
SAE J 1237
SAE AS 1241C
SAE ARP
1247C
SAE ARP
1256B
SAE AS 1290A
SAE AS 1291A
SAE AS 1292
SAE J 1292
SAE AS 1293
SAE AS 1294
SAE AS 1295
SAE AS 1298
SAE AS 1299B
SAE AS 1300A
SAE AS 1301C
SAE AS 1310B
SAE ARP
1331B
SAE AS 1339E
SAE J 1349
SAE AIR
1351D
SAE AIR
1362B
SAE J 1362
SAE AS 1376D

SAE AIR
1377A
SAE AMS
1379A
SAE AMS
1380A
SAE AMS
1382A
SAE AMS
1383A
SAE ARP
1383A
SAE J 1383
SAE AMS
1384A
SAE AMS
1385A
SAE AMS
1386A
SAE AMS
1387A
SAE J 1401
SAE J 1402
SAE AIR
1419A
SAE ARP
1420A
SAE AMS
1424C
SAE AMS
1426C
SAE AMS
1428C
SAE AMS
1431B
SAE AMS
1435A
SAE AMS 1453
SAE J 1453
SAE J 1472
SAE AMS
1476B

SAE J 1495
SAE J 1503
SAE J 1508
SAE MA 1520
SAE ARP
1524A
SAE AMS
1526B
SAE AMS
1534B
SAE AMS
1535B
SAE AMS
1537B
SAE AMS
1538A
SAE J 1545
SAE AMS 1547
SAE MA
1547A
SAE J 1559
SAE MA
1565A
SAE MA
1566A
SAE MA
1567B
SAE MA 1568
SAE MA 1573
SAE ARP
1575A
SAE AMS
1625B
SAE AMS
1626B
SAE AMS
1631B
SAE ARP
1658B

SAE ARP 1675

SAE J 1703
SAE AS 1708C
SAE AS 1711B
SAE AS 1712B
SAE AS 1713B
SAE AS 1714C
SAE AS 1715C
SAE AS 1716C
SAE AS 1717C
SAE AS 1718C
SAE AS 1719B
SAE AS 1720B
SAE MAP 1753
SAE J 1775/
HIR 1559A
SAE J 1776/
HIR 1514A
SAE J 1777/
HIR 1063B
SAE J 1780/
HRP 4382
SAE J 1781/
HIR 1694
SAE J 1782
SAE J 1783/
HRP 4538
SAE J 1784/
HIR 4544
SAE MA 1784

SAE AS 1790G
SAE AS 1791B
SAE AS 1792D
SAE ARP 1801
SAE MA 1806
SAE AS 1814B
SAE ARP
1820A
SAE AS 1895C
SAE AS
1895/1D
SAE AS
1895/2C
SAE AS
1895/3C
SAE AS
1895/4C
SAE AS
1895/5C
SAE AS
1895/6C
SAE AS
1895/7C
SAE AS
1895/8C
SAE AS
1895/9C
SAE AS
1895/10C
SAE AS
1895/11C
SAE AS
1895/12C
SAE AS
1895/13C
SAE AS
1895/14C

SAE AS
1895/15D
SAE AS
1895/16A
SAE AS
1895/17A
SAE AS
1895/18A
SAE AS
1895/19A
SAE AS
1895/20A
SAE AS
1895/21A
SAE AS
1895/22A
SAE J 1899
SAE ARP 1902
SAE AS 1909B
SAE AS 1910B
SAE AS 1911B
SAE AS 1912B
SAE AS 1913B
SAE AS 1914B
SAE ARP 1923
SAE J 1926/1
SAE J 1926/2
SAE J 1926/3
SAE ARP 1927
SAE AS 1933A
SAE MA 1937

SAE MA
1943A
SAE AS 1946A
SAE AS
1946SUP1
SAE ARP
1947A
SAE AS 1960
SAE AS
1960/1A
SAE AS 1960/2
SAE AS 1960/3
SAE AS 1960/4
SAE AS 1960/5
SAE J 1966
SAE ARP
1967A
SAE ARP 1972
SAE AS 1986B
SAE AS 1990B
SAE MA 2007
SAE MA 2010
SAE MA
2012B
SAE J 2014
SAE MA
2025A
SAE MA
2035A
SAE MA
2036A
SAE MA
2037A
SAE MA
2038A

SAE MA
2039A
SAE MA
2040B
SAE MA
2043A
SAE MA
2046A
SAE MA
2047C
SAE MA
2058A
SAE AS 2078
SAE MA 2080
SAE MA 2081
SAE MA 2082
SAE MA 2083
SAE MA 2084
SAE MA 2085
SAE MA 2086
SAE MA 2087
SAE MA 2088
SAE MA 2089
SAE MA 2090
SAE MA 2091
SAE MA 2093
SAE MA 2100
SAE MA 2101
SAE MA 2102
SAE MA 2103
SAE MA 2104
SAE MA 2105

SAE MA
2106A
SAE MA 2150
SAE MA
2150/1
SAE MA
2150/2
SAE MA
2150/4
SAE MA
2150/5
SAE MA
2150/6
SAE MA
2150/7
SAE MA 2151
SAE MA
2151/1
SAE MA
2151/2
SAE MA
2151/3
SAE MA
2152/1
SAE MA
2152/2
SAE MA
2153/1
SAE MA
2153/2
SAE MA
2154/1
SAE MA
2154/2
SAE MA
2154/3
SAE MA
2155/1
SAE MA
2155/2
SAE MA
2155/3
SAE MA
2155/4

SAE MA
2155/5
SAE MA
2156/1
SAE MA
2156/2
SAE MA
2156/3
SAE J 2162
SAE MA 2170
SAE MA 2171
SAE MA 2172
SAE AMSSTD-2175
SAE MA
2176A
SAE MA
2177A
SAE MA
2178A
SAE AMSSTD-2219
SAE AMS
2241M
SAE MAM
2241C
SAE AMS
2242F
SAE MAM
2242A
SAE AMS
2243G
SAE MAM
2243B
SAE J 2244/1
SAE AMS
2248E
SAE AMS
2249E

SAE AMS
2251G
SAE MAM
2251A
SAE AMS
2252D
SAE MAM
2252A
SAE AMS
2253E
SAE MAM
2253
SAE AMS
2259C
SAE AMS
2262F
SAE AMS
2269E
SAE J 2270
SAE J 2295
SAE AMS
2301H
SAE AMS
2303D
SAE MAM
2303B
SAE AMS
2310E
SAE AMS
2315E
SAE J 2333
SAE AMS
2360C
SAE AMS
2361C
SAE AMS
2362A
SAE J 2362
SAE J 2363
SAE AMS 2368
SAE AMS
2370G

SAE AMS
2371F
SAE AMS
2375C
SAE AMS
2400U
SAE AMS
2401E
SAE AMS
2404D
SAE AMS
2406J
SAE AMS
2409G
SAE AMS
2410H
SAE AMS
2411E
SAE AMS
2412G
SAE AMS
2413D
SAE AMS
2415G
SAE AMS
2416H
SAE AMS
2417F
SAE AMS
2418F
SAE AMS
2420C
SAE AMS
2424D
SAE AMS
2425E
SAE AMS
2430L
SAE AMS
2433B
SAE AMS
2434B
SAE AMS
2435F

SAE AMS
2436C
SAE AMS
2465B
SAE AMS
2469F
SAE AMS
2470L
SAE AMS
2471E
SAE AMS
2472E
SAE AMS
2475F
SAE AMS
2485H
SAE AMS
2486B
SAE AMS
2491D
SAE AMS
2515E
SAE MA 2515
SAE AMS
2516D
SAE AMS
2518A
SAE MA 2520
SAE MA 2521
SAE AMS
2535A
SAE MA 2536
SAE MA 2537
SAE AMS
2601F
SAE AMS
2602D
SAE AMS
2604F
SAE AMS
2605D
SAE AMS
2606E

SAE AMS
2607D
SAE AMS
2616D
SAE AMS
2620D
SAE AMS
2625D
SAE AMS
2629B
SAE AMS
2630B
SAE AMS
2631B
SAE AMS
2632A
SAE AMS
2633B
SAE AMS
2634B
SAE AMS
2643B
SAE AMS
2644A
SAE AMS
2658A
SAE AMS
2672F
SAE AMS
2681B
SAE AMS
2750C
SAE AMS
2755D
SAE AMS
2759C
SAE AMS
2759/6
SAE AMS
2759/7
SAE AMS
2762A
SAE AMS
2770E

SAE AMS
2800C
SAE AMS
2801A
SAE AMS
2804C
SAE AMS
2808D
SAE AMS
2810F
SAE AMS
2813F
SAE AMS
2816V
SAE AMS
2817E
SAE AMS
2825A
SAE AMS
3021C
SAE AMS
3025B
SAE AMS
3040B
SAE AMS
3041C
SAE AMS
3042C
SAE AMS
3043B
SAE AMS
3044D
SAE AMS
3045C
SAE AMS
3046D
SAE AMS
3055A
SAE AMS
3056B
SAE AS 3062C
SAE AS 3066

SAE AS 3067B
SAE AS 3068A
SAE AS 3069
SAE AS 3070
SAE AS 3071B
SAE AS 3080
SAE AS 3081
SAE AS 3082
SAE AS 3083
SAE AS 3086
SAE AS 3087
SAE AS 3088
SAE AS 3089
SAE AS 3090
SAE AS 3091
SAE AS 3092
SAE AS 3093
SAE AS 3094
SAE AS 3095
SAE AS 3096
SAE AS 3097
SAE AS 3098
SAE AMS
3100A
SAE AS 3106
SAE AMS
3107A
SAE AMS
3107/1A
SAE AMS
3107/2A
SAE AMS
3107/3A
SAE AMS
3107/4A
SAE AS 3121
SAE AS 3122
SAE AS 3123
SAE AS 3124
SAE AS 3125

SAE AS 3126
SAE AS 3127
SAE AS 3128
SAE AS 3129
SAE AS 3130
SAE AS 3131
SAE AS 3132
SAE AMS
3135D
SAE AMS
3136E
SAE AMS
3138C
SAE AMS
3138/1B
SAE AMS
3138/2B
SAE AMS
3138/4B
SAE AS 3144
SAE AMS
3151B
SAE AS 3163
SAE AMS
3166B
SAE AMS-M3171
SAE AS 3174
SAE AS 3175
SAE AS 3176
SAE AS 3177
SAE AMS
3193C
SAE AMS
3194C
SAE AMS
3195E
SAE AMS
3196F

SAE AMS
3197K
SAE AMS
3198K
SAE AMS
3199K
SAE AMS
3200J
SAE AMS
3201K
SAE AMS
3202L
SAE AMS
3204L
SAE AMS
3205L
SAE AMS
3207M
SAE AMS
3208M
SAE AS 3208
SAE AMS
3209L
SAE AS 3209
SAE AMS
3212N
SAE AMS
3213L
SAE AMS
3214K
SAE AMS
3215L
SAE AS 3215A
SAE AS 3216A
SAE AMS
3217A
SAE AMS
3217/1B
SAE AMS
3217/2B
SAE AMS
3217/3B

SAE AMS
3217/4A
SAE AMS
3217/5B
SAE AMS
3217/6
SAE AS 3217A
SAE AS 3218A
SAE AS 3219A
SAE AMS
3220F
SAE AS 3220
SAE AMS
3222G
SAE AMS
3226G
SAE AMS
3227G
SAE AS 3228A
SAE AS 3229A
SAE AS 3230A
SAE AS 3231A
SAE AS 3232
SAE AS 3233
SAE AS 3234
SAE AS 3235A
SAE AMS
3237F
SAE AMS
3238E
SAE AMS
3239E
SAE AMS
3240J
SAE AMS
3241H

SAE AMS
3243F
SAE AMS
3244G
SAE AMS
3248B
SAE AMS
3249C
SAE AMS
3251G
SAE AS 3257
SAE MA 3259
SAE AIR 3260
SAE AMS
3260B
SAE AS 3261
SAE MA 3266
SAE AMS 3269
SAE AMS
3270J
SAE AMS
3272A
SAE AS 3272
SAE AMS
3273E
SAE AS 3273
SAE AMS
3274G
SAE MA 3274
SAE AMS
3275B
SAE MA 3275
SAE AMS
3276C
SAE AMS
3277A
SAE MA
3279B
SAE MA
3280B

SAE AMS
3281B
SAE MA
3281B
SAE MA
3286A
SAE MA 3287
SAE MA 3288
SAE MA 3289
SAE AS 3291A
SAE MA 3294
SAE MA 3295
SAE MA 3296
SAE AMS
3301G
SAE AMS
3302G
SAE MA 3302
SAE AMS
3303J
SAE AS 3303
SAE AMS
3304G
SAE MA 3304
SAE AMS
3305H
SAE AMS
3307C
SAE AS 3307
SAE AS 3308
SAE AS 3309
SAE AMS
3315F
SAE AS 3319A
SAE AMS
3320G
SAE AS 3320A
SAE AS 3321A
SAE AS 3322A

SAE AMS 3323

SAE AMS
3325D
SAE AMS
3327C
SAE AMS
3328A
SAE AMS
3329A
SAE MA
3329C
SAE AMS
3330A
SAE MA
3330C
SAE AMS
3331A
SAE MA
3331C
SAE AMS
3332D
SAE AMS
3334D
SAE AMS
3336D
SAE AMS
3337D
SAE AMS
3338F
SAE MA 3338
SAE MA 3339
SAE MA
3340B
SAE MA 3341
SAE MA 3342
SAE MA 3343
SAE MA 3344
SAE AMS
3345E
SAE AMS
3346F

SAE AMS
3347B
SAE MA 3347
SAE AMS
3348C
SAE MA 3348
SAE AMS
3349C
SAE MA 3349
SAE MA 3350
SAE MA 3351
SAE MA 3352
SAE MA 3353
SAE MA 3354
SAE AMS
3356E
SAE AMS
3357G
SAE MA 3365
SAE MA 3366
SAE MA 3368
SAE MA 3369
SAE MA 3371
SAE AMS
3374A
SAE MA
3374A
SAE AMS
3375B
SAE MA
3376B
SAE MA
3377A
SAE MA
3378C
SAE MA 3379
SAE AMS
3380D
SAE MA 3380
SAE MA 3381
SAE AMS
3382C

SAE MA 3382
SAE MA 3383
SAE MA 3384
SAE MA 3385
SAE MA 3386
SAE MA 3387
SAE MA 3388
SAE MA 3389
SAE MA 3390
SAE MA 3391
SAE MA 3392
SAE MA 3393
SAE MA 3394
SAE MA 3398
SAE MA 3399
SAE AS 3400
SAE AS 3401
SAE AS 3402
SAE AS 3403
SAE AS 3404
SAE AS 3405
SAE AS 3406
SAE AS 3407
SAE AMS
3410J
SAE AMS
3411D
SAE AMS
3412D
SAE AMS
3415C
SAE MA 3421
SAE MA 3422
SAE MA 3423
SAE MA 3424
SAE MA 3425
SAE MA 3426
SAE MA 3427
SAE MA 3428
SAE MA 3429
SAE MA 3433
SAE MA 3434
SAE AS 3435
SAE AS 3436

SAE MA 3437
SAE MA 3438
SAE MAP 3439
SAE MAP 3440
SAE MA 3442
SAE MA 3444
SAE MA 3445
SAE MA
3446A
SAE MA 3447
SAE MA 3448
SAE MA 3449
SAE MA 3450
SAE MA 3453
SAE MA 3476
SAE AS 3477A
SAE AS 3479B
SAE AS 3480A
SAE AS 3481C
SAE AS 3482A
SAE AS 3483A
SAE AS 3485
SAE AS 3486A
SAE AS 3490
SAE AS 3491
SAE AS 3492
SAE AS 3493
SAE AS 3494
SAE AS 3495
SAE AS 3496
SAE AS 3497
SAE AS 3498
SAE AS 3504
SAE AS 3505

SAE AS 3506
SAE AS 3510A
SAE AS 3511A
SAE AMS
3529A
SAE AS 3547
SAE AS 3548
SAE AS 3549
SAE AS 3550
SAE AS 3551
SAE AMS
3568A
SAE AMS
3568/1A
SAE AMS
3568/2A
SAE AMS
3568/3A
SAE AS 3569
SAE AMS
3570E
SAE AS 3570
SAE AMS
3571B
SAE AMS
3571/1B
SAE AMS
3571/2B
SAE AMS
3571/3B
SAE AMS
3571/4B
SAE AMS
3571/5B
SAE AMS
3571/6B
SAE AMS
3571/7B
SAE AMS
3571/8B

SAE AMS
3571/9B
SAE AS 3574A
SAE MA 3574
SAE AS 3577
SAE AS 3578
SAE AS 3580
SAE AS 3581
SAE AS 3582
SAE AS 3584
SAE AS 3585
SAE AS 3586
SAE AS 3587
SAE AS 3588
SAE AS 3589
SAE AMS
3607F
SAE AMS
3611D
SAE AMS
3613C
SAE AMS
3615E
SAE AMS
3619C
SAE AMS
3623D
SAE AMS
3628D
SAE AMS
3632E
SAE AMS
3635D
SAE AMS
3636G
SAE AMS
3638F
SAE AMS
3646C
SAE AMS
3647C
SAE AMS
3648B

SAE AMS
3649C
SAE AMS
3650C
SAE AMS
3652C
SAE AMS
3653E
SAE AMS
3654C
SAE AMS
3655B
SAE AMS
3656E
SAE AMS
3662C
SAE AMS
3666D
SAE AMS
3668C
SAE AMS
3679B
SAE AMS
3680C
SAE AMS
3686A
SAE AMS
3688B
SAE AMS
3689B
SAE AMS
3710C
SAE AMS
3722A
SAE AMS
3726/2A
SAE AMS
3726/3A
SAE AMS
3751B
SAE AMS
3756A
SAE AMS
3792B

SAE AMS
3792/1A
SAE AMS
3792/2A
SAE AMS
3792/3A
SAE AMS
3797B
SAE AMS
3797/1B
SAE AMS
3797/2B
SAE AMS
3797/3B
SAE AMS
3797/4B
SAE AMS
3797/5B
SAE AMS
3797/6B
SAE AMS
3797/7B
SAE AMS
3797/8B
SAE AMS
3797/9B
SAE AMS
3797/10B
SAE AMS
3797/11B
SAE AMS
3797/12B
SAE AMS
3798B
SAE AMS
3798/1B
SAE AMS
3798/2B
SAE AMS
3798/3B
SAE AMS
3798/4B
SAE AMS
3798/5B

SAE AMS
3798/6B
SAE AMS
3798/7B
SAE AMS
3798/8B
SAE AMS
3798/9B
SAE AMS
3798/10B
SAE AMS
3798/11B
SAE AMS
3798/12B
SAE AMS
3798/13B
SAE AMS
3798/14B
SAE AMS
3798/15B
SAE AMS
3798/16B
SAE AMS
3799B
SAE AMS
3799/1B
SAE AMS
3799/2B
SAE AMS
3799/3B
SAE AMS
3799/4B
SAE AMS
3801A
SAE AMS
3801/1A
SAE AMS
3801/2A
SAE AMS
3801/3A
SAE AMS
3801/4A
SAE AMS
3801/5A

SAE AMS
3808A
SAE AMS
3813A
SAE AMS
3813/1A
SAE AMS
3813/2A
SAE AMS
3813/3A
SAE AMS
3817D
SAE AMS
3819B
SAE AMS
3824C
SAE AMS
3827B
SAE AMS
3832C
SAE AMS
3837D
SAE AMS
3846C
SAE AMS
3847C
SAE AMS
3865C
SAE AMS
3867B
SAE AMS
3867/1B
SAE AMS
3867/2B
SAE AMS
3867/3B
SAE AMS
3867/4A
SAE AMS
3867/5A
SAE AMS
3867/6A
SAE AMS
3890A

SAE AMS
3892B
SAE AMS
3892/1B
SAE AMS
3892/2B
SAE AMS
3892/3B
SAE AMS
3892/4B
SAE AMS
3892/5B
SAE AMS
3892/6A
SAE AMS
3892/7A
SAE AMS
3892/8A
SAE AMS
3892/9B
SAE AMS
3892/10A
SAE AMS
3894E
SAE AMS
3894/1B
SAE AMS
3894/2B
SAE AMS
3894/3B
SAE AMS
3894/5B
SAE AMS
3894/7B
SAE AMS
3894/8B
SAE AMS
3894/9B
SAE AMS
3894/10A
SAE AMS
3894/11A
SAE AMS
3898B

SAE AMS
3898/1B
SAE AMS
3898/2B
SAE AMS
3898/3B
SAE AMS
3898/4B
SAE AMS
3898/5B
SAE AMS
3901C
SAE AMS
3901/1C
SAE AMS
3901/2C
SAE AMS
3901/3C
SAE AMS
3901/4C
SAE AMS
3901/5C
SAE AMS
3901/6C
SAE AMS
3901/7C
SAE AMS
3901/8B
SAE AMS
3901/9B
SAE AMS
3901/10B
SAE AMS
3901/11B
SAE AMS
3901/12B
SAE AMS
3902E
SAE AMS
3903A
SAE AMS
3903/1A
SAE AMS
3903/2A

SAE AMS
3903/3A
SAE AMS
3903/4A
SAE AMS
3903/5A
SAE AMS
3903/6A
SAE AMS
3903/7A
SAE AMS
3903/8A
SAE AMS
3906B
SAE AMS
3906/1B
SAE AMS
3906/2B
SAE AMS
3906/3B
SAE AMS
3906/4B
SAE AMS
3906/5B
SAE AMS
3906/6B
SAE AMS
3906/7B
SAE AMS
3912A
SAE AMS
4003G
SAE ARP
4005A
SAE AMS
4009A
SAE MA 4016
SAE MA 4017
SAE MA 4018
SAE MA 4019
SAE MA 4020
SAE AMS
4021F
SAE MA 4021

SAE AMS
4026K
SAE AMS
4029J
SAE MA 4029
SAE MA 4030
SAE MA 4035
SAE AMS
4036J
SAE MA 4036
SAE MA
4037A
SAE MA
4038A
SAE MA
4039A
SAE MA
4040A
SAE MA 4044
SAE MA 4045
SAE AMS
4049J
SAE AMS
4050G
SAE AS 4059D
SAE AMS
4066B
SAE AIR
4069A
SAE MA 4070
SAE AMS
4071K
SAE AMS
4081H
SAE AMS
4082N
SAE AMS
4083K
SAE AMS
4084C

SAE AMS
4085B
SAE AMS
4089C
SAE AMS
4090D
SAE AS 4099A
SAE AMS
4100C
SAE AMS
4107E
SAE AMS
4108E
SAE AMS
4111B
SAE AMS
4120P
SAE AMS
4121G
SAE AMS
4126B
SAE AMS
4127H
SAE AMS
4130L
SAE AMS
4132E
SAE AMS
4133D
SAE AMS
4134D
SAE AMS
4141E
SAE AMS
4143C
SAE AMS
4144E
SAE AMS
4146D
SAE AMS
4147C
SAE MA 4147

SAE AMS
4148D
SAE AMS
4149C
SAE AS 4149
SAE AMS
4157C
SAE AMS
4159C
SAE AMS
4162C
SAE AMS
4163C
SAE AMS
4167G
SAE AS 4167A
SAE AMS
4174C
SAE MA 4177
SAE AMS
4179B
SAE AMS
4184E
SAE AMS
4185D
SAE AMS
4186B
SAE MA 4187
SAE MA 4189
SAE AMS
4190F
SAE AS 4194
SAE AMS
4200A
SAE AMS
4201D
SAE AMS
4202C
SAE AMS
4204B
SAE AMS
4205B

SAE AMS
4207A
SAE AMS
4212H
SAE AMS
4233B
SAE AMS
4235A
SAE AMS
4236A
SAE AMS
4244A
SAE AMS
4245B
SAE AMS
4246B
SAE AMS
4247A
SAE AMS
4248A
SAE AMS
4259A
SAE AMS
4261E
SAE AMS
4270A
SAE AIR 4275
SAE AMS
4281F
SAE AS 4283A
SAE AS 4299A
SAE AMS
4300B
SAE AMS 4308
SAE AMS 4309
SAE AMS
4310C
SAE AMS
4311C

SAE AMS
4312C
SAE AMS
4314B
SAE AMS
4320A
SAE AMS
4321A
SAE AS 4330
SAE AMS 4334
SAE AMS
4340D
SAE AMS
4341D
SAE AMS
4342D
SAE AMS
4343C
SAE AMS-G4343
SAE MA 4360
SAE AS 4370B
SAE AMS
4375J
SAE AMS
4376F
SAE AMS
4377G
SAE AMS-S4383
SAE AS 4389
SAE AS 4393A
SAE AMS
4395E
SAE AS 4395A
SAE AS 4396A
SAE AS 4417

SAE AMS
4418F
SAE AMS
4452B
SAE AMS
4453C
SAE AMS
4455D
SAE ARP 4462
SAE AMS
4484J
SAE AMS
4500H
SAE AMS
4505H
SAE AS 4506A
SAE AMS
4507G
SAE MA 4534
SAE AMS
4535B
SAE AMS
4616E
SAE AMS
4640F
SAE AMS
4651B
SAE AS 4702A
SAE AS 4710
SAE AS 4716
SAE AMS
4750C
SAE AMS
4764E
SAE AMS
4765E
SAE AMS
4766G
SAE AMS
4767F

SAE AMS
4770K
SAE AMS
4771H
SAE AMS
4772J
SAE AMS
4773F
SAE AMS
4774F
SAE AMS
4775G
SAE AMS
4776F
SAE AMS
4777F
SAE AMS
4778G
SAE AMS
4779F
SAE AMS
4780E
SAE AMS
4782E
SAE AMS
4783E
SAE AMS
4784E
SAE AMS
4785D
SAE AMS
4786E
SAE AMS
4787F
SAE AMS
4800D
SAE AMS
4805D
SAE AMS
4820D
SAE AMS
4827D
SAE AS 4841

SAE AMS
4842D
SAE AS 4842
SAE AS 4842/1
SAE AS 4843
SAE AS 4843/1
SAE AS 4843/2
SAE ARP 4848
SAE AMS
4855F
SAE AS 4855
SAE AS 4857
SAE AS 4858
SAE AS 4859
SAE AMS
4860E
SAE AS 4860
SAE AS 4861
SAE AMS
4862F
SAE AS 4863
SAE AS 4875
SAE AS 4875/1
SAE AS 4875/2
SAE AS 4877A
SAE AMS
4880C
SAE AMS
4890B

SAE AMS
4892B
SAE AMS
4911H
SAE AMS
4921G
SAE AMS
4922A
SAE AMS
4926J
SAE AMS
4928Q
SAE AMS
4931A
SAE AMS
4935F
SAE AMS
4941C
SAE AMS
4942D
SAE AMS
4943F
SAE AMS
4951F
SAE AMS
4956C
SAE AMS
4957B
SAE AMS
4959C
SAE AMS 4963
SAE AMS
4965G
SAE AMS
4966L
SAE AMS
4970F
SAE AMS
4971E
SAE AMS
4972D
SAE AMS
4975G

SAE AMS
4976E
SAE AMS
4978C
SAE AMS
4979D
SAE AMS
4981C
SAE AMS
4982B
SAE AMS
4983B
SAE AS 4983
SAE AMS
4984A
SAE AMS-S5000
SAE AMS-R5001
SAE AS 5017
SAE AMS
5020D
SAE AMS
5022M
SAE AMS
5024G
SAE AMS
5027D
SAE AMS
5028C
SAE AMS
5030G
SAE AMS
5036G
SAE AMS
5040L
SAE AMS
5042K
SAE AMS
5044H
SAE AMS
5045G

SAE AMS
5050J
SAE AMS
5053G
SAE AMS
5060G
SAE AMS
5061E
SAE AMS
5062F
SAE AMS-T5066
SAE AMS
5075E
SAE AMS
5077E
SAE AMS
5080H
SAE AMS
5085E
SAE AMS
5110G
SAE AMS
5120J
SAE AMS
5121G
SAE AMS
5122G
SAE AS 5131
SAE AMS
5132H
SAE AS 5132
SAE AS 5135
SAE AS 5160
SAE AS 5161A
SAE AS 5164
SAE AS 5165
SAE AS 5168

SAE AS 5169
SAE AS 5172
SAE AS 5173
SAE AS 5174
SAE AS 5176
SAE AS 5178
SAE AS 5179
SAE AS 5180
SAE AS 5181
SAE AS 5182
SAE AS 5183
SAE AS 5184
SAE AS 5185
SAE AS 5186
SAE AS 5187
SAE AS 5188
SAE AS 5189
SAE AS 5194A
SAE AS 5201
SAE AMS
5223E
SAE AMS
5225E
SAE AS 5258

SAE AS 5258/1
SAE AS 5258/2
SAE AS 5258/3
SAE AS 5258/4
SAE AS 5258/5
SAE AS 5258/6
SAE AS 5258/7
SAE AS 5258/8
SAE AS 5258/9
SAE AS
5258/10
SAE ARP 5316
SAE AMS
5333D
SAE AMS
5334F
SAE AMS
5337B
SAE AMS
5339D
SAE AMS
5342D
SAE AMS
5343D
SAE AMS
5344D
SAE AMS
5347A
SAE AMS
5349C
SAE AMS
5350H
SAE AMS
5352D

SAE AMS
5353C
SAE AMS
5354E
SAE AS 5355
SAE AS 5355/1
SAE AS 5355/2
SAE AS 5355/3
SAE AMS
5356A
SAE AS 5356
SAE AMS
5357A
SAE AMS
5360E
SAE AMS
5362K
SAE AMS
5366D
SAE AMS
5370C
SAE AS 5372
SAE AMS
5377E
SAE AS 5379
SAE AMS
5380F
SAE AMS
5382H
SAE AMS
5383D
SAE AMS
5384D
SAE AMS
5385G
SAE AMS
5390D
SAE AMS
5391E

SAE AMS
5398E
SAE AMS
5399C
SAE AMS
5400A
SAE AMS
5401B
SAE MAM
5401A
SAE AS 5406
SAE AMS 5412
SAE AS 5440
SAE AMS
5503D
SAE AMS
5504K
SAE AMS
5505D
SAE AMS
5506E
SAE AMS
5507E
SAE AMS
5508F
SAE AMS
5510P
SAE AMS
5511G
SAE AMS
5512K
SAE AMS
5513G
SAE AMS
5514G
SAE AMS
5516M
SAE AMS
5517L
SAE AMS
5518J

SAE AMS
5519L
SAE AMS
5520E
SAE AMS
5521G
SAE AMS
5523E
SAE AMS
5524J
SAE AMS
5525G
SAE AMS
5528F
SAE AMS
5529E
SAE AMS
5532F
SAE AMS
5536L
SAE MAM
5536A
SAE AMS
5540L
SAE AMS
5542L
SAE AMS
5544G
SAE AMS
5545D
SAE AMS
5547G
SAE AMS
5548M
SAE AMS
5552E
SAE AMS
5553E
SAE AMS
5554D
SAE AMS
5556G
SAE AMS
5558E

SAE AMS
5559H
SAE AMS
5560J
SAE AMS
5561F
SAE AMS
5562D
SAE AMS
5564C
SAE AMS
5565K
SAE AMS
5566L
SAE AMS
5567D
SAE AMS
5570N
SAE AMS
5571G
SAE AMS
5572G
SAE AMS
5575M
SAE AMS
5576J
SAE AMS
5578D
SAE AMS
5580J
SAE AMS
5582D
SAE AMS
5583C
SAE AMS 5584
SAE AMS
5585E
SAE AMS
5586E
SAE AS 5587
SAE AMS
5588F

SAE AMS
5589D
SAE AMS
5590E
SAE AMS
5591J
SAE AMS
5592D
SAE AMS
5593E
SAE AMS
5595F
SAE AMS
5596J
SAE AMS
5597E
SAE AMS
5598D
SAE MAM
5598B
SAE AMS
5599F
SAE MAM
5599B
SAE AMS
5604D
SAE AS 5604
SAE AMS
5608D
SAE AMS
5609D
SAE AMS
5610M
SAE AMS
5612G
SAE AMS
5613P
SAE AMS
5614D
SAE AMS
5616K
SAE AMS
5617H

SAE AMS
5618F
SAE AMS
5620F
SAE AMS
5629D
SAE AMS
5630G
SAE AMS
5632G
SAE AMS
5635D
SAE AMS
5636E
SAE AMS
5637F
SAE AMS
5638E
SAE AMS
5639G
SAE AMS
5640R
SAE AMS
5641F
SAE AMS
5642J
SAE AMS
5643P
SAE AMS
5646L
SAE AMS
5647G
SAE AMS
5649E
SAE AMS
5650E
SAE AMS
5653E
SAE AMS
5655D
SAE AMS
5656D
SAE AMS
5659K

SAE AMS
5660H
SAE AMS
5661E
SAE AMS
5662L
SAE AMS
5663J
SAE AMS
5664E
SAE AMS
5665M
SAE AMS
5666E
SAE AMS
5667K
SAE AMS
5668H
SAE AMS
5671F
SAE AMS
5672B
SAE AMS
5674D
SAE AMS
5675D
SAE AMS
5676E
SAE AMS
5678D
SAE AMS
5679G
SAE AMS
5680H
SAE AMS
5682D
SAE AMS
5685J
SAE AMS
5686G
SAE AMS
5687L
SAE AMS
5688K

SAE AMS
5689E
SAE AMS
5690L
SAE AMS
5692C
SAE AMS
5694G
SAE AMS
5697D
SAE AMS
5698F
SAE AMS
5699F
SAE AMS
5701C
SAE AMS
5703C
SAE AMS
5704G
SAE AMS
5706J
SAE MAM
5706B
SAE AMS
5707J
SAE AMS
5708G
SAE AMS
5709G
SAE AMS
5712H
SAE AMS
5713H
SAE AMS
5716G
SAE AMS
5717G
SAE AMS
5719C
SAE AMS
5731J
SAE AMS
5732G

SAE AMS
5734H
SAE AMS
5737M
SAE AMS
5738C
SAE AMS
5743H
SAE AMS
5744D
SAE AMS
5745E
SAE AMS
5746E
SAE AMS
5749D
SAE AMS
5754K
SAE AMS
5755E
SAE AMS
5758F
SAE AMS
5759J
SAE AMS
5763C
SAE AMS
5764C
SAE AMS
5766C
SAE AMS
5768J
SAE AMS
5769E
SAE AMS
5771D
SAE AMS
5772C
SAE AMS
5774D
SAE AMS
5776D
SAE AMS
5778D

SAE AS 5778
SAE AMS
5780D
SAE AMS
5782E
SAE AMS
5784D
SAE AMS
5786D
SAE AMS
5788E
SAE AMS
5789C
SAE AMS
5790B
SAE AMS
5791A
SAE AMS
5793A
SAE AMS
5794D
SAE AMS
5796D
SAE AMS
5798D
SAE AMS
5800E
SAE AMS
5801E
SAE AMS
5802B
SAE AMS
5803C
SAE AMS
5804F
SAE AMS
5805F
SAE AMS
5808B
SAE AMS 5810
SAE AS 5813
SAE AMS
5814B

SAE AMS
5817E
SAE AMS 5819
SAE AMS
5821F
SAE AMS
5822C
SAE MAM
5822A
SAE AMS
5823D
SAE AS 5823
SAE AMS
5825F
SAE AMS
5826C
SAE AMS
5828F
SAE AMS
5829D
SAE AMS
5830A
SAE AMS
5831A
SAE AMS
5832E
SAE AMS
5833B
SAE AMS
5836A
SAE AMS
5837F
SAE AMS
5838D
SAE AMS 5839
SAE AMS
5840C
SAE AMS
5841D
SAE AMS
5842D

SAE AMS
5843D
SAE AMS
5844E
SAE AMS
5845E
SAE AMS
5846A
SAE AMS
5850C
SAE AMS 5854
SAE AMS
5857A
SAE AMS
5860E
SAE AMS
5862E
SAE AMS
5863D
SAE AMS
5864A
SAE AMS
5865C
SAE AMS
5866C
SAE AMS
5869A
SAE AMS
5871D
SAE AMS
5873C
SAE AMS
5878A
SAE AMS
5879B
SAE AMS
5880B
SAE AMS
5884A
SAE AMS
5887A
SAE AMS
5888A

SAE AMS
5889A
SAE AMS
5890C
SAE AMS
5896A
SAE AMS
5897A
SAE AMS
5898A
SAE AMS
5900B
SAE AMS
5901B
SAE AMS
5902A
SAE AMS
5903A
SAE AMS
5904A
SAE AMS
5905A
SAE AMS
5906A
SAE AMS
5907A
SAE AMS
5910A
SAE AMS
5911A
SAE AMS
5912A
SAE AMS
5913A
SAE AMS 5914
SAE AMS 5930
SAE AMS 5931
SAE AMS 5940
SAE AS 5944

SAE AMS 5962

SAE ARP 6002
SAE AS 6011
SAE AMS-G6032
SAE AS 6038
SAE AS 6039B
SAE AMS-S6098
SAE AS 6136
SAE AS 6144
SAE AMS-C6183
SAE AMS
6250J
SAE AMS 6257
SAE AMS
6260M
SAE AMS
6265J
SAE AMS
6267E
SAE AMS
6270M
SAE AMS
6274L
SAE AMS
6276G
SAE AMS
6277E
SAE AMS
6278A
SAE AMS
6280H
SAE AMS
6282H
SAE AMS
6290G

SAE AMS
6292F
SAE AMS
6294F
SAE AMS
6299D
SAE AMS
6300D
SAE AMS
6302F
SAE AS 6302
SAE AMS
6303E
SAE AMS
6304H
SAE MAM
6304A
SAE AMS
6305C
SAE AMS
6308B
SAE AMS
6320K
SAE AMS
6322L
SAE AMS
6323J
SAE AMS
6324F
SAE AMS
6325G
SAE AMS
6327G
SAE AMS
6328J
SAE AMS 6345
SAE AMS
6348B
SAE AMS
6350J
SAE AMS
6351F

SAE AMS
6352G
SAE AMS
6354D
SAE AMS
6356D
SAE AMS
6358G
SAE AMS
6359F
SAE AMS
6360K
SAE AMS
6361D
SAE AMS
6362E
SAE AMS
6365H
SAE AMS
6370K
SAE AMS
6371H
SAE AMS
6372J
SAE AMS
6373E
SAE AMS
6374B
SAE AMS
6375A
SAE AMS
6378E
SAE AMS
6381F
SAE AMS
6382L
SAE AMS
6385E
SAE AMS
6395E
SAE AMS
6396C
SAE AS 6399

SAE AMS
6407F
SAE AMS
6408A
SAE AMS
6411E
SAE AMS
6412K
SAE AMS
6414H
SAE AMS
6415P
SAE AMS
6417E
SAE AMS
6419E
SAE AMS
6422F
SAE AMS
6424C
SAE AMS
6425A
SAE AMS
6426D
SAE AMS
6427H
SAE AMS
6428E
SAE AMS
6429E
SAE AMS
6430E
SAE AMS
6431K
SAE AMS
6433D
SAE AMS
6435C
SAE AMS
6437E
SAE AMS
6438D
SAE AMS
6439B

SAE AS 6439
SAE AMS
6440K
SAE AMS
6444H
SAE AMS
6447E
SAE AMS
6448H
SAE AMS
6450G
SAE AS 6451
SAE AMS
6453A
SAE AMS
6454B
SAE AMS
6455G
SAE AMS
6459C
SAE AMS
6460E
SAE AMS
6462G
SAE AMS
6463C
SAE AMS
6465C
SAE AMS
6466E
SAE AMS
6469B
SAE AMS
6470K
SAE AMS
6475G
SAE AMS
6476B
SAE AMS 6477
SAE AMS 6478

SAE AS 6480
SAE AMS
6484A
SAE AMS
6487H
SAE AMS
6488F
SAE AMS
6490E
SAE AMS
6491B
SAE AMS
6501B
SAE AMS
6519A
SAE AMS
6520C
SAE AMS
6522A
SAE AMS
6523E
SAE AMS
6525B
SAE AMS
6526D
SAE AMS
6527C
SAE AMS
6528A
SAE AMS
6529A
SAE AMS
6532A
SAE AMS
6533A
SAE AMS
6543B
SAE AMS
6544B
SAE AS 6625
SAE AMS-T6735
SAE AMS-T6736

SAE AMS-S6758
SAE AMS-T6841
SAE AMS-T6845
SAE AMS-R6855A
SAE AMS-W6858A
SAE AMS-H6875A
SAE AS 6882
SAE AMS-I7068
SAE AMS-T7081
SAE AS 7092
SAE AMS-S7124
SAE AMS-I7171
SAE AMS-F7190
SAE AMS-H7199
SAE AS 7220
SAE AS 7222A
SAE AS 7225
SAE AS 7228
SAE AS 7229
SAE AS 7232
SAE AS 7233
SAE AS 7234
SAE AS 7235
SAE AS 7236

SAE AS 7237
SAE AS 7245
SAE AS 7246
SAE AS 7250A
SAE AS 7251A
SAE AS 7253A
SAE AMS
7255C
SAE AMS
7256A
SAE AMS
7257C
SAE AMS
7258B
SAE AMS
7260E
SAE AMS
7264A
SAE AMS
7266B
SAE AMS
7267G
SAE AMS
7268C
SAE AMS
7269B
SAE AMS
7270K
SAE AMS
7271H
SAE AMS
7272F
SAE AMS
7273C
SAE AMS
7274H
SAE AS 7283

SAE AMS
7301F
SAE AMS
7320D
SAE AMS
7322D
SAE AS 7325A
SAE AS 7351
SAE AS 7431
SAE AMS
7445C
SAE AS 7452
SAE AS 7454
SAE AS 7455
SAE AS 7456
SAE AS 7458
SAE AS 7459A
SAE AS 7460
SAE AS 7461
SAE AS 7466A
SAE AS 7467A
SAE AS 7468B
SAE AS 7469
SAE AS 7470
SAE AS 7471B
SAE AS 7472
SAE AS 7473A
SAE AS 7474B
SAE AS 7475B

SAE AS 7477D
SAE AS 7478B
SAE AS 7482A
SAE AMS
7488D
SAE AMS
7490N
SAE AMS
7493K
SAE AMS
7496H
SAE AMS
7498K
SAE AMS
7510A
SAE AMS
7510/1A
SAE AMS
7510/2A
SAE AMS
7701D
SAE AMS
7702D
SAE AMS
7705D
SAE AMS
7707B
SAE AMS
7717C
SAE AMS
7718D
SAE AMS-S7720
SAE AMS
7721B
SAE AMS
7725C
SAE AMS
7727D
SAE AMS
7728G

SAE AMS
7731B
SAE AMS
7732B
SAE AS 7768
SAE AS 7768/1
SAE AS 7788
SAE AMS-M7866
SAE AMS 7903
SAE AMS
7904A
SAE AMS 7905
SAE AMS 7906
SAE AMS 7907
SAE AS 7928
SAE AS 7928/4
SAE AS 7928/5
SAE AS 7928/6
SAE AS
7928/1A
SAE AS
7928/2A
SAE AS 7928/7
SAE AMS-C8073
SAE AS 8090
SAE AS 8091
SAE AS 8181
SAE AMS-T8506

SAE AMS-S8559
SAE AS 8568
SAE AMS-A8576
SAE AS 8581
SAE AS 8660
SAE AS 8662
SAE AS 8700
SAE AS 8712
SAE AS 8775
SAE AS 8791
SAE AS
8791/1A
SAE AS 8796
SAE AMS-S8802
SAE AS 8804
SAE AMS-C8837
SAE AS 8905
SAE AS 8914
SAE AMS-S8949
SAE AMS-S8840
SAE AS 8952
SAE AMS-B8964
SAE AS 8976
SAE AS 8991
SAE AMS-T9046

SAE AS 9058A
SAE AMS-C9084
SAE AS 9105
SAE AS 9112A
SAE AS 9141
SAE AS 9142
SAE AS 9144
SAE AS 9158
SAE AS 9201
SAE AS 9202
SAE AS 9203
SAE AS 9204
SAE AS 9205
SAE AS 9208
SAE AS 9209
SAE AS 9210
SAE AS 9212
SAE AS 9216
SAE AS 9217
SAE AS 9218
SAE AS 9219
SAE AS 9230
SAE AS 9245
SAE AS 9276
SAE AS 9283
SAE AS 9284
SAE AS 9285
SAE AS 9286
SAE AS 9292
SAE AS 9294

SAE AS 9296
SAE AS 9297
SAE AS 9303
SAE AS 9304
SAE AS 9305
SAE AS 9306
SAE AS 9307
SAE AS 9308
SAE AS 9309
SAE AS 9310
SAE AS 9311
SAE AS 9312
SAE AS 9316
SAE AS 9317
SAE AS 9318
SAE AS 9319
SAE AS 9320
SAE AS 9321
SAE AS 9353
SAE AS 9354
SAE AS 9357
SAE AS 9358
SAE AS 9359
SAE AS 9360
SAE AS 9361
SAE AS 9362
SAE AS 9363
SAE AS 9364
SAE AS 9371
SAE AS 9372
SAE AS 9373
SAE AS 9374
SAE AS 9375
SAE AS 9376
SAE AS 9379
SAE AS 9380
SAE AS 9385

SAE AS 9386
SAE AS 9389
SAE AS 9390A
SAE AS 9391
SAE AS 9392
SAE AS 9393
SAE AS 9394
SAE AS 9395
SAE AS 9397
SAE AS 9398
SAE AS 9403
SAE AS 9432
SAE AS 9433
SAE AS 9434
SAE AS 9440
SAE AS 9441
SAE AS 9442
SAE AS 9449
SAE AS 9450
SAE AS 9451
SAE AS 9452
SAE AS 9453
SAE AS 9454
SAE AS 9455
SAE AS 9456
SAE AS 9457
SAE AS 9458
SAE AS 9459
SAE AS 9460
SAE AS 9462
SAE AS 9463
SAE AS 9464
SAE AS 9465
SAE AS 9466
SAE AS 9467
SAE AS 9468
SAE AS 9482
SAE AS 9486
SAE AS 9489

SAE AS 9490
SAE AS 9491
SAE AS 9492
SAE AS 9493
SAE AS 9494
SAE AS 9496
SAE AS 9500
SAE AS 9501
SAE AS 9502
SAE AS 9503
SAE AS 9505
SAE AS 9516
SAE AS 9517
SAE AS 9518
SAE AS 9519
SAE AS 9520
SAE AS 9521
SAE AS 9522
SAE AS 9523
SAE AS 9524
SAE AS 9525
SAE AS 9526
SAE AS 9527
SAE AS 9528
SAE AS 9529
SAE AS 9530
SAE AS 9531
SAE AS 9532
SAE AS 9533
SAE AS 9534
SAE AS 9549
SAE AS 9551
SAE AS 9552
SAE AS 9553
SAE AS 9554

SAE AS 9555
SAE AS 9556
SAE AS 9557
SAE AS 9558
SAE AS 9559
SAE AS 9564
SAE AS 9565A
SAE AS 9566
SAE AS 9567
SAE AS 9568A
SAE AS 9572
SAE AS 9573
SAE AS 9574
SAE AS 9575
SAE AS 9576
SAE AS 9577
SAE AS 9579
SAE AS 9581
SAE AS 9582
SAE AS 9583
SAE AS 9584
SAE AS 9585
SAE AS 9586
SAE AS 9587
SAE AS 9588
SAE AS 9589
SAE AS 9592

SAE AS 9593
SAE AS 9594
SAE AS 9595
SAE AS 9596
SAE AS 9597
SAE AS 9598
SAE AS 9599
SAE AS 9601
SAE AS 9602
SAE AS 9603
SAE AS 9631
SAE AS 9633
SAE AS 9638
SAE AS 9676
SAE AS 9677
SAE AS 9678
SAE AS 9679
SAE AS 9681
SAE AS 9685
SAE AS 9686
SAE AS 9687
SAE AS 9696
SAE AS 9697
SAE AS 9698
SAE AS 9699
SAE AS 9705
SAE AS 9712
SAE AS 9714

SAE AS 9715
SAE AS 9716
SAE AS 9724A
SAE AS 9732
SAE AS 9733
SAE AS 9734
SAE AS 9741
SAE AS 9742
SAE AS 9750
SAE AS 9751
SAE AS 9759
SAE AS 9760
SAE AS 9761
SAE AS 9770
SAE AS 9771
SAE AS 9772
SAE AS 9783
SAE AS 9784
SAE AS 9785
SAE AS 9786
SAE AS 9788
SAE AS 9790
SAE AS 9796
SAE AS 9805
SAE AS 9806
SAE AS 9808
SAE AS 9816
SAE AS 9821
SAE AS 9841
SAE AS 9842
SAE AS 9843

SAE AS 9844
SAE AS 9845
SAE AS 9846
SAE AS 9847
SAE AS 9848
SAE AS 9880
SAE AS 9881
SAE AS 9882
SAE AS 9885
SAE AS 9887
SAE AS 9890
SAE AS 9894
SAE AS 9895
SAE AS 9902
SAE AS 9914
SAE AS 9916
SAE AS 9917
SAE AS 9918
SAE AS 9923
SAE AS 9924
SAE AS 9928
SAE AS 9933
SAE AS 9944
SAE AS 9947
SAE AS 9955
SAE AS 9956
SAE AS 9958
SAE AS 9964
SAE AS 9966
SAE AS 9967

SAE AS 10051
SAE AS 10081
SAE AS 10380
SAE AMS-S13165
SAE AS 13341
SAE AS 13471
SAE AS 13591
SAE AS 14101
SAE AS 14102
SAE AS
14103A
SAE AS 14104
SAE AS 14105
SAE AS 14114
SAE AS
14153A
SAE AS
14154A
SAE AS 14227
SAE AS 14237
SAE AS
14238A
SAE AS 14243
SAE AS 14244
SAE AS 14274
SAE AS 14487
SAE AS 14488
SAE AS 17107
SAE AS 17143

SAE AS 17184
SAE AS 17852
SAE AS 17983
SAE AS 18012
SAE AS 18013
SAE AS 18121
SAE AS 18259
SAE AS 18276
SAE AS 18280
REV A
SAE AS
18280/1
SAE AMS-L18331
SAE AS 18607
SAE AS
19692A
SAE AMS-C19853
SAE AMS-B20148
SAE AS 20218
SAE AS 20253
SAE AS 20708
SAE AS
20708/1
SAE AS
20708/2
SAE AS
20708/3
SAE AS
20708/4
SAE AS
20708/5
SAE AS
20708/6

SAE AS
20708/7
SAE AS
20708/8
SAE AS
20708/9
SAE AS
20708/14
SAE AS
20708/15
SAE AS
20708/16
SAE AS
20708/17
SAE AS
20708/19
SAE AS
20708/20
SAE AS
20708/21
SAE AS
20708/22
SAE AS
20708/23
SAE AS
20708/28
SAE AS
20708/29
SAE AS
20708/30
SAE AS
20708/31
SAE AS
20708/32
SAE AS
20708/33
SAE AS
20708/34
SAE AS
20708/35
SAE AS
20708/36
SAE AS
20708/45

SAE AS
20708/46
SAE AS
20708/47
SAE AS
20708/48
SAE AS
20708/49
SAE AS
20708/50
SAE AS
20708/52
SAE AS
20708/53
SAE AS
20708/54
SAE AS
20708/55
SAE AS
20708/56
SAE AS
20708/62
SAE AS
20708/66
SAE AS
20708/67
SAE AS
20708/70
SAE AS
20708/74
SAE AS
20708/76
SAE AS
20708/78
SAE AS
20708/79
SAE AS
20708/80
SAE AS
20708/81
SAE AS
20708/131
SAE AS
20708/500

SAE AMS-T21014
SAE AS
21150B
SAE AS
21151B
SAE AS
21152B
SAE AS
21153B
SAE AS 21154
SAE AS 21155
SAE AMS-A21180
SAE AS 21220
SAE AS 21221
SAE AS 21223
SAE AS 21230
SAE AS 21231
SAE AS 21232
SAE AS 21233
SAE AS
21428A
SAE AS 21431
SAE AS 21438
SAE AS 21439
SAE AS
21441A
SAE AS 21442
SAE AS 21443
SAE AS 21446

SAE AS 21447
SAE AMS-T21595
SAE AMS-P21600
SAE AS 21608
SAE AS
21900A
SAE AS
21902A
SAE AS
21913A
SAE AS
21914A
SAE AS 21915
SAE AS
21916A
SAE AS 21919
SAE AS 21921
SAE AS 21922
SAE AS
21923A
SAE AS
21924A
SAE AS
21925A
SAE AS 21926
SAE AS 21935
SAE AS 21937
SAE AS 21938
SAE AS 21939
SAE AS 21941
SAE AS 21942
SAE AS 21944
SAE AS 21945
SAE AMS-T22085

SAE AS 22145
SAE AMSDTL-22499
SAE AMSDTL-22499/1A
SAE AMSDTL-22499/2A
SAE AMSDTL-22499/3
SAE AMSDTL-22499/4
SAE AMS-C22542
SAE AMS-C22587
SAE AMS-A22771
SAE AS 22805
SAE AMS-P22968
SAE AS 23003
SAE AMS-I23011
SAE AMSDTL-23053
SAE AMSDTL-23053/1
SAE AMSDTL-23053/4
SAE AS 23190
SAE AMS-T23397
SAE AS 23479
SAE AMSDTL-23053/5
SAE AMSDTL-23053/6

SAE AMSDTL-23053/7
SAE AMSDTL-23053/8
SAE AS 23899
SAE AS 24000
SAE AS 24001
SAE AMSDTL-23053/10
SAE AMSDTL-23053/11
SAE AMSDTL-23053/12
SAE AMSDTL-23053/13
SAE AMSDTL-23053/14
SAE AMSDTL-23053/15
SAE AMSDTL-23053/16
SAE AMSDTL-23053/17
SAE AMSDTL-23053/18
SAE AMS-I23053/2
SAE AS
23190/1
SAE AS
23190/2
SAE AS
23190/3
SAE AS 24333
SAE AS 24334
SAE AS 24405
SAE AS
24463A

SAE AS 24464
SAE AS 24509
SAE AS 24510
SAE AS 24563
SAE AMS-F24610
SAE AS 24651
SAE AS 24652
SAE AS 24654
SAE AS 25019
SAE AS 25027
SAE AS 25036
SAE AS 25050
SAE AS 25064
SAE AS 25109
SAE AS 25226
SAE AS 25281
SAE AMS-A25463
SAE AS 25481
SAE AMS-G25667
SAE AMS-G25871
SAE AS 27194
SAE AS 27195
SAE AS 27196
SAE AS 27197
SAE AS 27198
SAE AS 27212

SAE AS
27640A
SAE AS
27641A
SAE AS
27642A
SAE AS
27643A
SAE AS
27644A
SAE AS
27645A
SAE AS
27646A
SAE AS
27647A
SAE AS
27648A
SAE AS
27649A
SAE AMS-C27725
SAE AS 28772
SAE AS 28778
SAE AS
28912A
SAE AS
28913A
SAE AS
28914A
SAE AS
28915A
SAE AS 29512
SAE AS 29513
SAE AS 29523
SAE AS 29561
SAE AMS-C29602
SAE AS
31091A
SAE AS
31171A
SAE AS
31371A

SAE AS 31971
SAE AS 33201
SAE AS 33481
SAE AS 33514
SAE AS 33515
SAE AS 33559
SAE AS 33566
SAE AS 33583
SAE AS 33611
SAE AS
33671A
SAE AS
33681A
SAE AS 33731
SAE AS
33931A
SAE AS
34001A
SAE AS
34021A
SAE AS
34121A
SAE AS 34541
SAE AS 34591
SAE AS 35051
SAE AS 35061
SAE AS 35769
SAE AS
38386/1
SAE AS
38386/2
SAE AS
38386/3
SAE AS
38386/4
SAE AS 38390

SAE AS 38404
SAE AS 39631
SAE AS 39901
SAE AS 49011
SAE AS 50571
SAE AS
50881A
SAE AS 51007
SAE AS 51989
SAE AS 51992
SAE AS 53731
SAE AS 56761
SAE AS
58091/1
SAE AS 70991
SAE AS 71051
SAE AS 81531
SAE AMS-C81562
SAE AS 81587
SAE AMS-A81596
SAE AS 81703
SAE AS
81714/1
SAE AS
81714/2
SAE AS
81714/3
SAE AS
81714/4

SAE AS
81714/5
SAE AS
81714/6
SAE AS
81714/7
SAE AS
81714/8
SAE AS
81714/9
SAE AS
81714/11
SAE AS
81714/12
SAE AMS-P81728
SAE AMS-C81769
SAE AS 81820
SAE AS
81820/1
SAE AS
81820/2
SAE AS
81820/3
SAE AS
81820/4
SAE AS 81822
SAE AS
81822/1
SAE AS
81822/3
SAE AS
81822/5
SAE AS 81824
SAE AS
81824/1
SAE AMS-H81829
SAE AMS-R81835
SAE AMS-T81914

SAE AMS-T81914/1
SAE AMS-T81914/2
SAE AMS-T81915
SAE AS 81934
SAE AS
81934/1
SAE AS
81934/2
SAE AS 81935
SAE AMS-T81914/3
SAE AMS-T81914/4
SAE AMS-T81914/5
SAE AMS-T81914/6
SAE AS
81935/1
SAE AS
81935/2
SAE AS
81935/3
SAE AS
81935/4
SAE AMS-T81914/7
SAE AS
81935/5
SAE AS 81936
SAE AS 819361
SAE AS 819362
SAE AMS-C81986
SAE AMS-C83231
SAE AMS-I83387

SAE AMS-C83445
SAE AS 83519
SAE AS
83519/1
SAE AS
83519/2
SAE AS 85075
SAE AS 85421
SAE AS 85720
SAE AS
85720/1
SAE AS 90376
SAE AS 91001
SAE AS 91101
SAE AS 91111
SAE AS 91601
SAE AS 91641
SAE AS 91691
SAE AS 91701
SAE AS 91711
SAE AS 91721
SAE AS 92001
SAE AS 115401
THRU AS
115450
SAE AS 115451
THRU AS
115500
SAE AS 115501
THRU AS
115550
SAE AS 115601
THRU AS
115650
SAE AS 115651
THRU AS
115700

SAE AS 115801
THRU AS
115850
SAE AS 115851
THRU AS
115900
SAE AS 115901
THRU AS
115950
SAE AS 115951
THRU AS
116000
SAE AS 116001
THRU AS
116050
SAE AS 116051
THRU AS
116100
SAE AS 116101
THRU AS
116150
SAE AS 116901
THRU AS
116912
SAE AS 116925
THRU AS
116960
SAE AS 117001
THRU AS
117040
SAE AS 117041
THRU AS
117080
SAE AS
121501 THRU
AS 121525
SAE AS
121601 THRU
AS 121650
SAE AS
121651 THRU
AS 121700

SAE AS
121701 THRU
AS 121750
SAE AS
121751 THRU
AS 121800
SAE AS
121801 THRU
AS 121850
SAE AS
121851 THRU
AS 121925
SAE AS
122676 THRU
AS 122775
SAE AS
122900 THRU
AS 122939
SAE AS
123020 THRU
AS 123119
SAE AS
123151 THRU
AS 123300
SAE AS
123301 THRU
AS 123450
SAE AS
123451 THRU
AS 123600
SAE AS
123601 THRU
AS 123750
SAE AS
124951 THRU
AS 125100
SAE AS
125101A
THRU
125250A
SAE AS
125251A
THRU
125400A

SAE AS
125401 THRU
AS 125550
SAE AS
125551 THRU
AS 125700
SAE AS
125701A
THRU
125850A
SAE AS
126275 THRU
AS 126586
SAE AS
126587 THRU
AS 126652
SAE AS
126881 THRU
AS 127192
SAE AS
127193 THRU
AS 127492
SAE AS
128363 THRU
AS 128686
SAE AS
128687 THRU
AS 128998
SAE AS
129293 THRU
AS 129604
SAE AS
150201 THRU
AS 150300
SAE AS
150301 THRU
AS 150400
SAE AS
150426 THRU
AS 150450
SAE AS
150501 THRU
AS 150800

SAE AS
150801 THRU
AS 151100
SAE AS
151401 THRU
AS 151700
SAE AS
151701 THRU
AS 152000
SAE AS
152601 THRU
AS 152900
SAE AS
152901 THRU
AS 153200
SAE AS
153201 THRU
AS 153500
SAE AS
154701 THRU
AS 155000
SAE AS
155001 THRU
AS 155300
SAE AS
155301 THRU
AS 155600
SAE AS
155901 THRU
AS 156200
SAE AS
158901 THRU
AS 159200
SAE AS
162501 THRU
AS 162800
SDI/DOOR
111-B
SDI/DOOR
111-C
SDI/DOOR
111-D
SDI/DOOR
111-E

SDI/DOOR
111-F
SDI/DOOR
111-G
SDI/DOOR 107
SDI/DOOR
111-A
SMACNA KIT
SMACNA SEI
SSPC PAINT 1
SSPC SP COM
SSPC PAINT 2
SSPC PAINT
13
SSPC PA 1
SSPC PS 1.09
SSPC SP 1
SSPC VIS 1
SSPC PA 2
SSPC SP 2
SSPC VIS 2
SSPC PA 3
SSPC SP 3
SSPC PA 4
SSPC PS 4.01
SSPC PS 4.02
SSPC PAINT 5
SSPC SP 5
SSPC SP 6

SSPC SP 7
SSPC PAINT 8
SSPC SP 8
SSPC PAINT 9
SSPC PS 10.01
SSPC SP 10
SSPC PAINT
11
SSPC PS 11.01
SSPC SP 11
SSPC PS 12.01
SSPC PS 13.01
SSPC PS 14.01
SSPC PAINT
15
SSPC PAINT
16
SSPC PAINT
20
SSPC PAINT
22
SSPC PAINT
27
SSPC PAINT
101
TIA TIA/EIA455-35A
UL 5
UL 1
UL 38
UL 44
UL 3

UL 4
UL 67
UL 6
UL 83
UL 94
UL 9
UL 10A
UL 10B
UL 109
UL 252
UL 325
UL 14B
UL 14C
UL 486A
UL 486B
UL 497
UL 514A
UL 514C
UL 19
UL 746A
UL 746B
UL 746C
UL 746D
UL 746E

UL 20
UL 796
UL 873
UL 923
UL 924
UL 935
UL 1082
UL 1242
UL 1449
UL 1581
UL 32
UL 33
UL 45
UL 50
UL 58
UL 62
UL 67
UL 70
UL 73
UL 80
UL 87
UL 92
UL 96

UL 96A
UL 98
UL 103
UL 123
UL 130
UL 142
UL 147
UL 153
UL 154
UL 174
UL 181
UL 181B
UL 187
UL 197
UL 198C
UL 198E
UL 198H
UL 207
UL 209
UL 214
UL 228
UL 246
UL 250
UL 262
UL 296

UL 298
UL 299
UL 312
UL 330
UL 343
UL 353
UL 360
UL 372
UL 378
UL 399
UL 401
UL 404
UL 412
UL 414
UL 427
UL 429
UL 430
UL 437
UL 441
UL 467
UL 471
UL 474
UL 484
UL 486C

UL 489
UL 496
UL 497B
UL 498
UL 499
UL 506
UL 507
UL 508
UL 510
UL 511
UL 512
UL 514A
UL 514B
UL 521
UL 542
UL 544
UL 555
UL 555S
UL 558
UL 561
UL 574
UL 580
UL 586
UL 621
UL 634
UL 636

UL 639
UL 644
UL 651
UL 651A
UL 664
UL 674
UL 681
UL 687
UL 698
UL 705
UL 710
UL 711
UL 719
UL 723
UL 726
UL 727
UL 731
UL 732
UL 749
UL 752
UL 763
UL 768
UL 773
UL 773A
UL 778
UL 779

UL 781
UL 783
UL 786
UL 789
UL 790
UL 795
UL 797
UL 817
UL 842
UL 844
UL 845
UL 854
UL 857
UL 858
UL 863
UL 864
UL 867
UL 869A
UL 870
UL 884
UL 886
UL 891
UL 894
UL 900
UL 910
UL 916

UL 921
UL 943
UL 977
UL 984
UL 987
UL 997
UL 998
UL 1004
UL 1008
UL 1010
UL 1012
UL 1017
UL 1029
UL 1030
UL 1034
UL 1042
UL 1053
UL 1067
UL 1076
UL 1077
UL 1086
UL 1093
UL 1196
UL 1206

UL 1236
UL 1244
UL 1262
UL 1283
UL 1316
UL 1414
UL 1414
UL 1437
UL 1479
UL 1559
UL 1569
UL 1570
UL 1571
UL 1572
UL 1610
UL 1666
UL 1776
UL 1950
UL 1995
UL 60950
ANSI Z79.8
ANSI Z79.9
ANSI Z79.10
ANSI Z89.1
ANSI Z358.1

API STD 2550

ASA S1.10
ASME A39.1
ASME A39.1A
ASME A39.1B
ASME B16.32
ASME B40.1
ASME
MH1.4.1M
ASME
Y14.26M
ASME B18.27
ASTM A 1
ASTM A 27/A
27M
ASTM A 36/A
36M REV A
ASTM A 47/A
47M
ASTM A 48
REV A
ASTM A 67
ASTM A 82
REV A
ASTM A 90/A
90M
ASTM A 105/A
105M
ASTM A 106
ASTM A 108
ASTM A 116
ASTM A 123/A
123M
ASTM A 125
ASTM A 126
ASTM A 134
ASTM A 139
ASTM A 143
ASTM A 153/A
153M

ASTM A 159
ASTM A 167
ASTM A 176
ASTM A 181/A
181M
ASTM A 182/A
182M
ASTM A 183
ASTM A 185
ASTM A 193/A
193M REV A
ASTM A 194/A
194M
ASTM A 197/A
197M
ASTM A 203/A
203M
ASTM A 204/A
204M
ASTM A 213/A
213M
ASTM A 214/A
214M
ASTM A 216/A
216M
ASTM A 217/A
217M
ASTM A 220/A
220M
ASTM A 227/A
227M
ASTM A 228/A
228M
ASTM A 230/A
230M
ASTM A 231/A
231M
ASTM A 232/A
232M
ASTM A 239

ASTM A 242/A
242M REV A
ASTM A 247
ASTM A 249/A
249M
ASTM A 252
ASTM A 254
ASTM A 262
ASTM A 265
REV A
ASTM A 268/A
268M
ASTM A 276
REV A
ASTM A 283/A
283M
ASTM A 295
ASTM A 302/A
302M
ASTM A 307
ASTM A 308
ASTM A 309
ASTM A 313/A
313M
ASTM A 314
ASTM A 320/A
320M
ASTM A 322
ASTM A 325
ASTM A 325M
ASTM A 327
ASTM A 328/A
328M
ASTM A 333/A
333M
ASTM A 335/A
335M
ASTM A 336/A
336M
ASTM A 342/A
342M

ASTM A 351/A
351M
ASTM A 352/A
352M
ASTM A 354
ASTM A 366/A
366M
ASTM A 380
ASTM A 385
ASTM A 387/A
387M
ABMA 16.1
ABMA 16.2
AIA/NAS
NA0077
AIA/NAS
NA0078
AIA/NAS
NA0079
AIA/NAS
NA0080
AIA/NAS
NA0081
AIA/NAS
NA0082
AIA/NAS
NA0083
AIA/NAS
NA0084
AIA/NAS
NA0095
AIA/NAS
NA0096
AIA/NAS NAS
526
AIA/NAS NAS
527
AIA/NAS NAS
663
AIA/NAS NAS
664

AIA/NAS NAS
665
AIA/NAS NAS
666
AIA/NAS NAS
667
AIA/NAS NAS
668
AIA/NAS NAS
1579
AIA/NAS NAS
1582
AIA/NAS
NASM21
AIA/NAS
NASM23
AIA/NAS
NASM24
AIA/NAS
NASM25
AIA/NAS
NASM26
AIA/NAS
NASM27
AIA/NAS
NASM28
AIA/NAS
NASM29
AIA/NAS
NASM30
AIA/NAS
NASM32
AIA/NAS
NASM34
AIA/NAS
NASM37
AIA/NAS
NASM63540
AIA/NAS
NASM22
ANSI A14.1
ANSI C78.40
ANSI C136.3

ANSI C136.10
ANSI C136.13
ANSI IT3.604
ANSI PH1.30
ANSI PH1.33
ANSI PH3.69
ANSI PH3.101
ANSI PH3.601
ANSI PH4.29
ANSI X3.206
ASTM A 389/A
389M
ASTM A 395/A
395M
ASTM A 403/A
403M REV B
ASTM A 411
ASTM A 413/A
413M
ASTM A 421/A
421M REV A
ASTM A 424
ASTM A 428/A
428M
ASTM A 434
REV A
ASTM A 436
ASTM A 439
ASTM A 449
ASTM A 463/A
463M
ASTM A 475
ASTM A 478

ASTM A 479/A
479M
ASTM A 480/A
480M
ASTM A 484/A
484M
ASTM A 485
ASTM A 487/A
487M
ASTM A 488/A
488M
ASTM A 489
ASTM A 490
ASTM A 493
ASTM A 494/A
494M
ASTM A 496
REV A
ASTM A 497
ASTM A 499
ASTM A 502
ASTM A 506
ASTM A 508/A
508M
ASTM A 510
ASTM A 510M
ASTM A 511
ASTM A 512
ASTM A 513
ASTM A 514/A
514M REV A
ASTM A 517/A
517M
ASTM A 518/A
518M
ASTM A 519
ASTM A 520
ASTM A 532/A
532M REV A

ASTM A 533/A
533M
ASTM A 534
ASTM A 535
ASTM A 536
ASTM A 537/A
537M
ASTM A 555/A
555M
ASTM A 561
ASTM A 563
ASTM A 563M
ASTM A 564/A
564M
ASTM A 565
ASTM A 568/A
568M REV B
ASTM A 569/A
569M
ASTM A 570/A
570M
ASTM A 574
ASTM A 575
ASTM A 576
REV B
ASTM A 578/A
578M
ASTM A 580/A
580M
ASTM A 581/A
581M REV B
ASTM A 586
ASTM A 589
ASTM A 591/A
591M
ASTM A 595
ASTM A 597
ASTM A 603

ASTM A 606
ASTM A 611
ASTM A 620/A
620M
ASTM A 622/A
622M
ASTM A 623
ASTM A 623M
ASTM A 624/A
624M
ASTM A 625/A
625M
ASTM A 626/A
626M
ASTM A 627
ASTM A 630
ASTM A 633/A
633M REV A
ASTM A 635/A
635M
ASTM A 641/A
641M
ASTM A 644
ASTM A 659/A
659M
ASTM A 663/A
663M
ASTM A 666
ASTM A 675/A
675M REV A
ASTM A 681
ASTM A 682/A
682M
ASTM A 684/A
684M
ASTM A 686
ASTM A 687

ASTM A 690/A
690M REV A
ASTM A 693
ASTM A 695
REV B
ASTM A 696
REV A
ASTM A 700
ASTM A 703/A
703M
ASTM A 711
ASTM A 739
REV A
ASTM A 740
ASTM A 742/A
742M
ASTM A 743/A
743M REV A
ASTM A 744/A
744M
ASTM A 746
ASTM A 749/A
749M
ASTM A 751
ASTM A 757/A
757M
ASTM A 760/A
760M
ASTM A 762/A
762M
ASTM A 767/A
767M REV B
ASTM A 768
ASTM A 770/A
770M
ASTM A 775/A
775M
ASTM A 780

ASTM A 792/A
792M
ASTM A 793
ASTM A 798/A
798M
ASTM A 809
ASTM A 818
ASTM A 829/A
829M
ASTM A 849
ASTM A 853
ASTM A 861
ASTM A 880
ASTM A 907/A
907M
ASTM A 908
ASTM A 967
ASTM B 633
ASTM B 2
ASTM B 5
ASTM B 8
ASTM B 19
ASTM B 22
ASTM B 29
ASTM B 33
ASTM B 43
ASTM B 49
ASTM B 63
ASTM B 66
ASTM B 67
REV A
ASTM B 75
ASTM B 75M
ASTM B 80
ASTM B 85
ASTM B 88M
ASTM B 90/B
90M
ASTM B 91
ASTM B 96/B
96M

ASTM B 98/B
98M
ASTM B 101
ASTM B 107/B
107M
ASTM B 117
ASTM B 124/B
124M
ASTM B 134
ASTM B 136
ASTM B 137
ASTM B 138
ASTM B 150
ASTM B 150M
REV A
ASTM B 152M
REV A
ASTM B 153
ASTM B 154
ASTM B 162
ASTM B 163
ASTM B 164
ASTM B 170
ASTM B 179
ASTM B 183
ASTM B 189
ASTM B 193
ASTM B 194
ASTM B 199
ASTM B 200
ASTM B 206/B
206M
ASTM B 209
ASTM B 210
ASTM B 210M
ASTM B 211
ASTM B 211M
REV A

ASTM B 212
ASTM B 213
ASTM B 214
ASTM B 221
ASTM B 221M
ASTM B 227
ASTM B 228
ASTM B 230/B
230M
ASTM B 231/B
231M
ASTM B 236
ASTM B 236M
ASTM B 244
ASTM B 246
ASTM B 247
ASTM B 250
ASTM B 251
ASTM B 251M
ASTM B 253
ASTM B 254
ASTM B 258
ASTM B 265
ASTM B 275
ASTM B 281
ASTM B 283
REV A
ASTM B 298
ASTM B 301/B
301M
ASTM B 302
ASTM B 306
ASTM B 308/B
308M

ASTM B 311
ASTM B 313/B
313M
ASTM B 315
ASTM B 316/B
316M
ASTM B 317
ASTM B 322
ASTM B 329
ASTM B 333
ASTM B 335
ASTM B 338
ASTM B 344
ASTM B 345/B
345M
ASTM B 348
ASTM B 355
ASTM B 359
ASTM B 361
ASTM B 367
ASTM B 368
ASTM B 369
ASTM B 370
ASTM B 371
ASTM B 373
ASTM B 397
ASTM B 403
ASTM B 411
ASTM B 422
ASTM B 424
REV A
ASTM B 427
REV A
ASTM B 429
ASTM B 430
ASTM B 447
ASTM B 449

ASTM B 452
ASTM B 456
ASTM B 463
ASTM B 465
ASTM B 472
ASTM B 476
ASTM B 483/B
483M
ASTM B 487
ASTM B 488
ASTM B 491/B
491M
ASTM B 499
ASTM B 501
ASTM B 504
ASTM B 508
ASTM B 520
ASTM B 522
ASTM B 530
ASTM B 540
ASTM B 541
ASTM B 543M
ASTM B 547/B
547M
ASTM B 557
ASTM B 563
ASTM B 564
REV A
ASTM B 566
ASTM B 567
ASTM B 568
ASTM B 578
ASTM B 579
ASTM B 574
REV A

ASTM B 575
REV A
ASTM B 580
ASTM B 584
ASTM B 591
REV A
ASTM B 593
ASTM B 596
ASTM B 597
ASTM B 598
ASTM B 609/B
609M
ASTM B 617
ASTM B 624
ASTM B 628
ASTM B 632/B
632M
ASTM B 637
ASTM B 640
ASTM B 643
ASTM B 645
ASTM B 646
ASTM B 650
ASTM B 656
ASTM B 660
ASTM B 661
ASTM B 666/B
666M
ASTM B 683
ASTM B 684
ASTM B 685
ASTM B 687
ASTM B 689
ASTM B 696
ASTM B 731
ASTM B 733
ASTM B 740
ASTM B 742
ASTM B 745/B
745M
ASTM B 763
ASTM B 766

ASTM B 768
ASTM B 788/B
788M
ASTM B 824
ASTM C 425
ASTM C 4
ASTM C 14
ASTM C 27
ASTM C 28/C
28M
ASTM C 29/C
29M
ASTM C 31/C
31M
ASTM C 32
ASTM C 34
ASTM C 35
ASTM C 37/C
37M
ASTM C 40
ASTM C 42/C
42M
ASTM C 59/C
59M
ASTM C 61
ASTM C 61/C
61M
ASTM C 67
ASTM C 73
REV A
ASTM C 76
ASTM C 76M
ASTM C 79/C
79M
ASTM C 87
ASTM C 88
REV A
ASTM C 91
ASTM C 94/C
94M
ASTM C 99

ASTM C 109/C
109M
ASTM C 113
ASTM C 116
ASTM C 117
ASTM C 119
ASTM C 120
ASTM C 121
ASTM C 123
ASTM C 125
REV A
ASTM C 126
ASTM C 133
ASTM C 136
ASTM C 138/C
138M REV A
ASTM C 142
ASTM C 143/C
143M
ASTM C 144
ASTM C 148
ASTM C 156
ASTM C 157/C
157M
ASTM C 159
ASTM C 162
ASTM C 167
ASTM C 170
ASTM C 171
REV A
ASTM C 172
ASTM C 173/C
173M
ASTM C 174/C
174M
ASTM C 183
ASTM C 188
ASTM C 192/C
192M
ASTM C 196

ASTM C 206
ASTM C 209
ASTM C 215
ASTM C 225
ASTM C 227
REV A
ASTM C 236
ASTM C 241
ASTM C 260
ASTM C 267
ASTM C 270
ASTM C 273
ASTM C 282
ASTM C 286
ASTM C 289
ASTM C 293
ASTM C 294
ASTM C 297
ASTM C 301
ASTM C 302
ASTM C 303
ASTM C 307
ASTM C 309
REV A
ASTM C 315
ASTM C 317/C
317M
ASTM C 318/C
318M
ASTM C 321
ASTM C 330
ASTM C 332
ASTM C 335
ASTM C 338
ASTM C 356
ASTM C 361
ASTM C 365
ASTM C 366
ASTM C 390
ASTM C 393

ASTM C 395
ASTM C 403/C
403M
ASTM C 411
ASTM C 412
ASTM C 412M
ASTM C 413
ASTM C 414
ASTM C 418
ASTM C 426
ASTM C 443
ASTM C 443M
ASTM C 444M
ASTM C 470/C
470M
ASTM C 472
ASTM C 478
ASTM C 478M
ASTM C 481
ASTM C 494/C
494M REV A
ASTM C 495
REV A
ASTM C 496
ASTM C 497M
ASTM C 499
ASTM C 506
ASTM C 506M
ASTM C 507
ASTM C 509
ASTM C 513
ASTM C 514
ASTM C 516

ASTM C 518
ASTM C 520
ASTM C 534
ASTM C 542
ASTM C 549
ASTM C 550
ASTM C 552
ASTM C 557
ASTM C 561
ASTM C 562
ASTM C 564
ASTM C 566
ASTM C 567
ASTM C 568
ASTM C 570
ASTM C 580
ASTM C 581
ASTM C 582
ASTM C 586
ASTM C 587
ASTM C 588/C
588M
ASTM C 591
ASTM C 597
ASTM C 610
ASTM C 613/C
613M
ASTM C 616
ASTM C 617
ASTM C 630/C
630M
ASTM C 633
ASTM C 635
ASTM C 636
ASTM C 637
REV A
ASTM C 638

ASTM C 639
ASTM C 641
ASTM C 651
ASTM C 654M
ASTM C 655
ASTM C 655M
ASTM C 658
ASTM C 661
ASTM C 663
ASTM C 665
ASTM C 666
ASTM C 669
ASTM C 670
ASTM C 679
ASTM C 695
ASTM C 700
ASTM C 702
ASTM C 721
ASTM C 725
ASTM C 732
ASTM C 739
ASTM C 764
ASTM C 778
ASTM C 780
ASTM C 792
ASTM C 793
ASTM C 794
ASTM C 796
ASTM C 800
ASTM C 805
ASTM C 811
ASTM C 816
ASTM C 822
ASTM C 823
ASTM C 840

ASTM C 841
ASTM C 843
ASTM C 844
ASTM C 847
ASTM C 864
ASTM C 865
ASTM C 873
ASTM C 883
ASTM C 884/C
884M
ASTM C 913
ASTM C 916
ASTM C 921
ASTM C 923
ASTM C 930
ASTM C 931/C
931M
ASTM C 932
REV A
ASTM C 937
ASTM C 939
ASTM C 942
ASTM C 954
ASTM C 964
ASTM C 966
ASTM C 977
ASTM C 984
ASTM C 989
ASTM C 995
ASTM C 1002
ASTM C 1015
ASTM C 1018
ASTM C 1029
ASTM C 1036
ASTM C 1047

ASTM C 1048
REV B
ASTM C 1063
ASTM C
1064/C 1064M
ASTM C 1085
ASTM C 1107
ASTM C 1116
ASTM C 1289
ASTM D 543
ASTM D 1535
ASTM D 1578
ASTM D 2105
ASTM D 2310
ASTM D 2992
ASTM D 2996
ASTM D 2997
ASTM D 3517
ASTM D 4
ASTM D 5
ASTM D 6
ASTM D 12
ASTM D 13
ASTM D 16
ASTM D 20
ASTM D 29
ASTM D 34
ASTM D 36
ASTM D 41
ASTM D 43
ASTM D 50
ASTM D 71
ASTM D 75
ASTM D 79

ASTM D 86
REV A
ASTM D 91
ASTM D 92
REV A
ASTM D 93
ASTM D 95
ASTM D 97
REV A
ASTM D 113
ASTM D 116
ASTM D 117
ASTM D 123
REV B
ASTM D 126
ASTM D 127
ASTM D 128
ASTM D 129
ASTM D 130
ASTM D 149
REV A
ASTM D 150
ASTM D 153
ASTM D 173
REV B
ASTM D 178
ASTM D 185
ASTM D 187
ASTM D 189
ASTM D 204
ASTM D 209
ASTM D 217
ASTM D 224
ASTM D 225
REV A

ASTM D 227
REV A
ASTM D 229
ASTM D 233
ASTM D 249
ASTM D 260
ASTM D 261
ASTM D 268
ASTM D 276
REV A
ASTM D 280
ASTM D 281
ASTM D 305
ASTM D 312
ASTM D 322
ASTM D 329
ASTM D 330
ASTM D 331
ASTM D 348
ASTM D 350
ASTM D 351
ASTM D 358
ASTM D 369
ASTM D 371
ASTM D 374
ASTM D 380
ASTM D 381
ASTM D 387
ASTM D 390
ASTM D 395
ASTM D 409
ASTM D 412
REV A
ASTM D 413
ASTM D 418
ASTM D 422
ASTM D 430
ASTM D 444

ASTM D 449
ASTM D 453
ASTM D 454
ASTM D 456
ASTM D 460
ASTM D 461
ASTM D 473
ASTM D 476
ASTM D 482
REV A
ASTM D 494
ASTM D 496
ASTM D 498
ASTM D 511
ASTM D 512
ASTM D 515
ASTM D 517
ASTM D 518
ASTM D 520
ASTM D 522
REV A
ASTM D 523
ASTM D 524
ASTM D 529
ASTM D 541
ASTM D 545
ASTM D 546
ASTM D 555
ASTM D 559
ASTM D 563
ASTM D 565
ASTM D 566
ASTM D 573
ASTM D 575
ASTM D 578
ASTM D 579

ASTM D 595
ASTM D 607
ASTM D 609
ASTM D 610
ASTM D 612
ASTM D 617
ASTM D 621
ASTM D 622
ASTM D 629
ASTM D 633
ASTM D 635
ASTM D 637
ASTM D 638M
ASTM D 642
ASTM D 644
ASTM D 646
ASTM D 647
REV A
ASTM D 665
ASTM D 671
ASTM D 673
REV A
ASTM D 685
ASTM D 689
REV A
ASTM D 692
ASTM D 693
ASTM D 695
ASTM D 695M
ASTM D 696
ASTM D 698
REV A
ASTM D 704
ASTM D 706
ASTM D 707
ASTM D 709

ASTM D 710
ASTM D 711
ASTM D 714
ASTM D 720
ASTM D 724
ASTM D 726
ASTM D 729
ASTM D 732
ASTM D 740
ASTM D 746
ASTM D 747
ASTM D 751
ASTM D 756
ASTM D 774/D
774M
ASTM D 779
ASTM D 782
ASTM D 785
ASTM D 788
ASTM D 790M
ASTM D 797
ASTM D 808
ASTM D 823
ASTM D 828
ASTM D 832
ASTM D 853
ASTM D 854
ASTM D 858
ASTM D 859
ASTM D 865
ASTM D 869
ASTM D 871
ASTM D 873
REV A
ASTM D 874

ASTM D 876
ASTM D 878
REV A
ASTM D 883
ASTM D 888
ASTM D 891
ASTM D 893
ASTM D 895
ASTM D 896
ASTM D 899
ASTM D 905
ASTM D 906
ASTM D 924
ASTM D 926
ASTM D 929
ASTM D 938
ASTM D 942
ASTM D 943
ASTM D 945
ASTM D 946
ASTM D 950
ASTM D 951
ASTM D 953
ASTM D 968
ASTM D 969
ASTM D 971
REV A
ASTM D 976
ASTM D 977
ASTM D 979
ASTM D 991
ASTM D 995
REV B
ASTM D 996
ASTM D 1000
ASTM D 1002

ASTM D 1003
ASTM D 1004
REV A
ASTM D 1005
ASTM D 1006
ASTM D 1013
ASTM D 1014
ASTM D 1018
ASTM D 1030
ASTM D 1043
ASTM D 1044
ASTM D 1047
ASTM D 1048
ASTM D 1049
ASTM D 1050
ASTM D 1052
ASTM D 1053
REV A
ASTM D 1054
ASTM D 1055
ASTM D 1056
ASTM D 1059
ASTM D 1067
ASTM D 1068
ASTM D 1076
ASTM D 1078
ASTM D 1085
ASTM D 1117
ASTM D 1120
ASTM D 1121
ASTM D 1122
REV A
ASTM D 1123
ASTM D 1125
ASTM D 1126
ASTM D 1133
ASTM D 1135
ASTM D 1139
ASTM D 1140

ASTM D 1143
ASTM D 1146
ASTM D 1151
ASTM D 1153
ASTM D 1160
ASTM D 1169
ASTM D 1171
ASTM D 1172
ASTM D 1176
ASTM D 1179
ASTM D 1183
ASTM D 1184
ASTM D 1185
REV A
ASTM D 1188
ASTM D 1193
ASTM D 1194
ASTM D 1199
ASTM D 1200
ASTM D 1203
ASTM D 1208
ASTM D 1209
ASTM D 1210
ASTM D 1214
ASTM D 1217
ASTM D 1218
ASTM D 1227
ASTM D 1229
ASTM D 1242
REV A
ASTM D 1246
ASTM D 1250
ASTM D 1250
VOL I
ASTM D 1250
VOL II
ASTM D 1250
VOL IV

ASTM D 1250
VOL VI
ASTM D 1250
VOL VII
ASTM D 1252
ASTM D 1259
ASTM D 1263
ASTM D 1266
ASTM D 1272
ASTM D 1275
REV A
ASTM D 1250
VOL VIII
ASTM D 1250
VOL IX
ASTM D 1250
VOL XIII
ASTM D 1287
ASTM D 1293
ASTM D 1296
ASTM D 1298
ASTM D 1306
ASTM D 1308
ASTM D 1310
ASTM D 1330
ASTM D 1335
ASTM D 1348
ASTM D 1349
ASTM D 1353
ASTM D 1364
ASTM D 1366
ASTM D 1386
ASTM D 1388
ASTM D 1394
ASTM D 1397
ASTM D 1398
ASTM D 1415
ASTM D 1416

ASTM D 1418
REV A
ASTM D 1423
ASTM D 1424
ASTM D 1426
ASTM D 1435
ASTM D 1448
ASTM D 1456
ASTM D 1457
ASTM D 1458
ASTM D 1468
ASTM D 1474
ASTM D 1475
ASTM D 1483
ASTM D 1488
ASTM D 1489
ASTM D 1493
ASTM D 1494
ASTM D 1499
ASTM D 1500
ASTM D 1505
ASTM D 1506
ASTM D 1509
ASTM D 1510
ASTM D 1512
ASTM D 1513
REV A
ASTM D 1516
ASTM D 1525
ASTM D 1527
ASTM D 1542
ASTM D 1544
ASTM D 1545
ASTM D 1547
ASTM D 1548
ASTM D 1555
ASTM D 1556
ASTM D 1559

ASTM D 1565
ASTM D 1577
ASTM D 1579
ASTM D 1586
ASTM D 1596
ASTM D 1598
ASTM D 1599
ASTM D 1600
ASTM D 1603
ASTM D 1607
ASTM D 1608
ASTM D 1611
ASTM D 1613
ASTM D 1614
ASTM D 1617
ASTM D 1619
ASTM D 1621
ASTM D 1623
ASTM D 1630
ASTM D 1631
ASTM D 1632
ASTM D 1633
ASTM D 1640
ASTM D 1642
ASTM D 1647
ASTM D 1652
ASTM D 1654
ASTM D 1667
ASTM D 1668
REV A
ASTM D 1675
ASTM D 1688
ASTM D
1704/D 1704M
ASTM D 1708
ASTM D 1709

ASTM D 1718
ASTM D 1719
ASTM D 1722
ASTM D 1726
ASTM D 1735
ASTM D 1742
ASTM D 1744
ASTM D 1746
ASTM D 1747
ASTM D 1751
ASTM D 1752
ASTM D 1779
ASTM D 1785
ASTM D 1796
ASTM D 1799
ASTM D 1813
ASTM D 1824
ASTM D 1840
ASTM D 1845
ASTM D 1849
ASTM D 1854
ASTM D 1863
ASTM D 1864
ASTM D 1868
ASTM D 1869
ASTM D 1870
ASTM D 1875
ASTM D 1876
ASTM D 1881
ASTM D 1883
ASTM D 1889
ASTM D 1894
ASTM D 1895
ASTM D 1898
ASTM D 1907

ASTM D 1917
ASTM D 1921
ASTM D 1922
REV A
ASTM D 1925
ASTM D 1927
ASTM D 1928
ASTM D 1943
ASTM D 1947
ASTM D 1950
ASTM D 1951
ASTM D 1952
ASTM D 1954
ASTM D 1957
ASTM D 1960
ASTM D 1962
ASTM D 1964
ASTM D 1965
ASTM D 1968
REV A
ASTM D 1974
ASTM D 1980
ASTM D 1983
ASTM D 2000
ASTM D
2010/D 2010M
ASTM D 2013
REV A
ASTM D 2015
ASTM D 2022
ASTM D 2024
ASTM D 2026
ASTM D 2027
ASTM D 2029
ASTM D 2041
ASTM D 2042

ASTM D 2060
ASTM D 2069
ASTM D 2073
ASTM D 2091
ASTM D 2099
ASTM D 2103
ASTM D 2104
ASTM D 2109
ASTM D 2111
ASTM D 2112
ASTM D 2113
ASTM D 2115
ASTM D 2116
ASTM D 2122
ASTM D 2136
ASTM D 2137
ASTM D 2152
ASTM D 2156
ASTM D 2161
ASTM D 2162
ASTM D 2165
ASTM D 2167
ASTM D 2168
ASTM D 2170
ASTM D 2171
ASTM D 2176
REV A
ASTM D 2194
ASTM D 2196
ASTM D 2197
ASTM D 2207
ASTM D 2208
ASTM D 2209
ASTM D 2210
ASTM D 2212

ASTM D 2213
ASTM D 2217
ASTM D 2221
ASTM D 2231
ASTM D 2235
ASTM D 2243
ASTM D 2244
ASTM D 2245
ASTM D 2247
ASTM D 2248
REV A
ASTM D 2251
ASTM D 2257
ASTM D 2258
ASTM D 2262
ASTM D 2266
ASTM D 2268
ASTM D 2270
ASTM D 2272
ASTM D 2273
ASTM D 2276
ASTM D 2282
ASTM D 2290
ASTM D 2303
ASTM D 2321
ASTM D 2322
ASTM D 2330
ASTM D 2343
ASTM D
2344/D 2344M
ASTM D 2346
ASTM D 2350
ASTM D 2360

ASTM D 2369
ASTM D 2370
ASTM D 2371
ASTM D 2372
ASTM D 2382
ASTM D 2392
ASTM D 2393
ASTM D 2397
ASTM D 2412
REV A
ASTM D 2417
ASTM D 2419
ASTM D 2440
ASTM D 2444
ASTM D 2447
ASTM D 2455
ASTM D 2457
ASTM D 2464
ASTM D 2466
ASTM D 2467
ASTM D 2472
ASTM D 2475
ASTM D 2481
ASTM D 2486
ASTM D 2488
ASTM D 2492
ASTM D 2511
ASTM D 2512
ASTM D 2517
ASTM D 2520
ASTM D 2532
ASTM D 2533
ASTM D 2556
REV A
ASTM D 2563
ASTM D 2565
ASTM D 2572

ASTM D 2573
ASTM D 2579
ASTM D 2580
ASTM D 2582
ASTM D 2584
ASTM D 2586
ASTM D 2595
ASTM D 2596
ASTM D 2609
ASTM D 2617
ASTM D 2622
ASTM D 2625
ASTM D 2628
ASTM D 2632
ASTM D 2649
ASTM D 2651
ASTM D 2654
REV A
ASTM D 2661
ASTM D 2662
REV A
ASTM D 2665
ASTM D 2666
REV A
ASTM D 2670
ASTM D 2671
ASTM D 2672
REV A
ASTM D 2683
ASTM D 2697
ASTM D 2698
ASTM D 2702
ASTM D 2709
ASTM D 2714

ASTM D 2724
ASTM D 2729
REV A
ASTM D 2734
ASTM D 2737
ASTM D 2740
ASTM D 2742
ASTM D 2751
REV A
ASTM D 2774
ASTM D 2794
ASTM D 2800
ASTM D 2802
ASTM D 2803
ASTM D 2804
ASTM D 2807
ASTM D 2810
ASTM D 2813
ASTM D 2821
ASTM D 2822
ASTM D 2824
ASTM D 2835
ASTM D 2837
REV A
ASTM D 2842
ASTM D 2843
ASTM D
2846/D 2846M
ASTM D 2852
ASTM D 2855
ASTM D 2856
ASTM D
2860/D 2860M
ASTM D 2863
ASTM D 2867

ASTM D 2868
ASTM D 2885
ASTM D 2887
ASTM D 2896
ASTM D 2914
ASTM D 2919
ASTM D 2922
ASTM D 2934
ASTM D 2935
ASTM D 2939
ASTM D 2940
ASTM D 2941
ASTM D 2942
ASTM D 2950
ASTM D 2989
ASTM D 2990
ASTM D 2995
ASTM D 3000
REV A
ASTM D 3014
ASTM D 3020
ASTM D 3029
ASTM D 3032
ASTM D 3034
ASTM D 3037
ASTM D
3039/D 3039M
ASTM D 3045
ASTM D 3061
ASTM D 3064
ASTM D 3066
ASTM D 3067
ASTM D 3068
ASTM D 3069
ASTM D 3070

ASTM D 3077
ASTM D 3078
ASTM D 3083
ASTM D 3091
ASTM D 3092
ASTM D 3097
ASTM D 3107
ASTM D 3120
ASTM D 3122
ASTM D 3137
ASTM D 3138
ASTM D 3139
ASTM D 3162
ASTM D 3166
ASTM D 3168
ASTM D 3171
ASTM D 3174
ASTM D 3175
ASTM D 3183
ASTM D 3212
REV A
ASTM D 3222
ASTM D 3227
ASTM D 3228
ASTM D 3230
ASTM D 3231
ASTM D 3240
ASTM D 3242
ASTM D 3249
ASTM D 3254
ASTM D 3257
ASTM D 3261
ASTM D 3268
ASTM D 3272

ASTM D 3274
ASTM D 3278
ASTM D 3280
ASTM D 3282
ASTM D 3286
ASTM D 3293
REV A
ASTM D 3308
ASTM D 3309
REV A
ASTM D 3320
ASTM D 3329
ASTM D
3330/D 3330M
ASTM D 3335
REV A
ASTM D 3336
ASTM D 3343
ASTM D 3363
ASTM D 3369
ASTM D 3373
ASTM D 3374
ASTM D 3379
ASTM D 3381
ASTM D 3385
ASTM D 3389
ASTM D 3400
ASTM D 3401
ASTM D
3410/D 3410M
ASTM D 3417
ASTM D 3432
ASTM D 3441
ASTM D 3443
ASTM D 3446
ASTM D 3447

ASTM D 3452
ASTM D 3462
ASTM D
3479/D 3479M
ASTM D 3482
ASTM D 3492
ASTM D 3495
ASTM D 3500
ASTM D
3518/D 3518M
ASTM D
3529/D 3529M
ASTM D
3530/D 3530M
ASTM D 3531
ASTM D 3532
ASTM D 3545
ASTM D 3551
ASTM D 3552
ASTM D 3559
ASTM D 3567
ASTM D 3574
ASTM D 3595
ASTM D 3611
ASTM D 3617
ASTM D 3623
REV A
ASTM D 3624
REV A
ASTM D 3634
ASTM D 3656
ASTM D 3691
REV A
ASTM D 3701
REV A
ASTM D 3703
ASTM D
3715/D 3715M
ASTM D 3718
REV A
ASTM D 3725

ASTM D 3732
ASTM D 3734
ASTM D 3738
ASTM D
3759/D 3759M
ASTM D 3761
ASTM D 3772
ASTM D 3773
ASTM D 3774
ASTM D 3775
ASTM D 3786
ASTM D 3787
ASTM D 3792
ASTM D 3800
ASTM D
3811/D 3811M
ASTM D
3816/D 3816M
ASTM D
3833/D 3833M
ASTM D 3839
REV A
ASTM D 3846
ASTM D 3887
ASTM D
3889/D 3889M
ASTM D 3892
ASTM D 3905
ASTM D 3910
ASTM D 3916
ASTM D 3935
ASTM D 3941
ASTM D 3948
REV A
ASTM D 3950
ASTM D 3953
ASTM D 4000
ASTM D 4004

ASTM D 4006
ASTM D 4018
ASTM D 4019
REV A
ASTM D 4022
ASTM D 4047
ASTM D 4048
ASTM D 4052
ASTM D 4057
ASTM D 4060
ASTM D 4065
ASTM D 4066
ASTM D 4067
ASTM D 4075
ASTM D 4083
ASTM D 4092
ASTM D 4099
ASTM D 4101
ASTM D 4102
ASTM D 4126
ASTM D 4157
ASTM D 4169
ASTM D 4172
ASTM D 4175
ASTM D 4177
ASTM D 4181
ASTM D 4203
ASTM D 4214
ASTM D 4216
ASTM D 4225
ASTM D 4239
ASTM D 4253
ASTM D 4254

ASTM D
4255/D 4255M
ASTM D 4263
ASTM D 4268
ASTM D 4289
ASTM D 4294
ASTM D 4300
REV A
ASTM D 4317
ASTM D 4318
ASTM D 4325
ASTM D 4338
ASTM D 4355
ASTM D 4377
ASTM D 4402
ASTM D 4417
ASTM D 4434
ASTM D 4442
ASTM D 4444
ASTM D 4473
REV A
ASTM D 4479
ASTM D 4500
ASTM D 4507
REV A
ASTM D 4530
ASTM D 4615
ASTM D 4617
ASTM D 4624
ASTM D 4628
ASTM D 4629
ASTM D 4632
ASTM D 4634
ASTM D 4636
ASTM D 4637

ASTM D 4643
ASTM D 4653
ASTM D 4655
ASTM D 4673
ASTM D 4675
ASTM D 4683
ASTM D 4684
ASTM D 4690
ASTM D 4701
ASTM D 4704
ASTM D 4705
ASTM D
4727/D 4727M
ASTM D 4737
REV A
ASTM D 4745
ASTM D 4749
ASTM D 4751
REV A
ASTM D 4783
REV A
ASTM D 4791
ASTM D 4802
ASTM D 4807
ASTM D 4808
ASTM D 4814
ASTM D 4815
ASTM D 4833
ASTM D 4857
ASTM D 4858
ASTM D 4859
ASTM D 4892

ASTM D 4897
ASTM D 4898
ASTM D 4925
ASTM D 4927
ASTM D 4928
ASTM D 4951
ASTM D 4952
ASTM D 4985
REV A
ASTM D 5006
ASTM D 5034
ASTM D 5035
ASTM D 5040
ASTM D
5052/D 5052M
ASTM D 5053
ASTM D 5059
ASTM D 5105
ASTM D 5151
ASTM D 5185
ASTM D 5191
ASTM D 5204
ASTM D 5205
ASTM D 5213
ASTM D
5229/D 5229M
ASTM D 5300
ASTM D 5304
ASTM D 5436
ASTM D 5445
ASTM D 5452
ASTM D
5486/D 5486M
REV A

ASTM D 5632
ASTM D 5727
ASTM D 5948
ASTM D 6012
ASTM D 6017
ASTM D 6020
ASTM D 6076
ASTM D 6107
ASTM D 6183
ASTM D 6199
ASTM E 3
ASTM E 6
ASTM E 7
ASTM E 18
ASTM E 21
ASTM E 23
ASTM E 28
ASTM E 29
REV A
ASTM E 30
ASTM E 34
ASTM E 45
ASTM E 53
ASTM E 59
ASTM E 62
ASTM E 70
ASTM E 75
ASTM E 77
ASTM E 84
ASTM E 88
ASTM E 90
ASTM E 96
ASTM E 97
ASTM E 100
ASTM E 103
ASTM E 108

ASTM E 110
ASTM E 114
ASTM E 119
REV A
ASTM E 120
ASTM E 127
ASTM E 132
ASTM E 136
ASTM E 139
ASTM E 142
ASTM E 145
ASTM E 152
REV A
ASTM E 162
ASTM E 167
ASTM E 168
ASTM E 171
ASTM E 175
ASTM E 177
REV A
ASTM E 186
ASTM E 191
ASTM E 193
ASTM E 202
ASTM E 203
ASTM E 214
ASTM E 220
ASTM E 223
ASTM E 224
ASTM E 227
ASTM E 228
ASTM E 243
ASTM E 248
ASTM E 251
ASTM E 252
ASTM E 256

ASTM E 257
ASTM E 263
ASTM E 264
ASTM E 265
ASTM E 270
ASTM E 273
ASTM E 280
ASTM E 283
ASTM E 290
REV A
ASTM E 291
ASTM E 300
ASTM E 308
ASTM E 309
ASTM E 310
ASTM E 324
ASTM E 330
ASTM E 335
ASTM E 336
ASTM E 338
ASTM E 340
ASTM E 345
ASTM E 357
ASTM E 358
ASTM E 359
ASTM E 376
ASTM E 384
ASTM E 390
ASTM E 399
ASTM E 407
ASTM E 413
ASTM E 424
ASTM E 428
ASTM E 437
ASTM E 443

ASTM E 447
ASTM E 449
ASTM E 456
ASTM E 458
ASTM E 462
ASTM E 478
REV A
ASTM E 488
ASTM E 493
ASTM E 499
ASTM E 518
REV A
ASTM E 543
ASTM E 545
ASTM E 546
ASTM E 557
ASTM E 570
ASTM E 577
ASTM E 580
ASTM E 595
ASTM E 596
ASTM E 602
ASTM E 604
ASTM E 607
ASTM E 619
ASTM E 621
ASTM E 662
ASTM E 666
ASTM E 667
ASTM E 671
ASTM E 672
ASTM E 675
ASTM E 691
ASTM E 694
ASTM E 713

ASTM E 720
ASTM E 721
ASTM E 722
ASTM E 736
ASTM E 737
ASTM E 756
ASTM E 774
ASTM E 785
ASTM E 787
ASTM E 795
ASTM E 800
ASTM E 812
ASTM E 814
ASTM E 822
ASTM E 825
ASTM E 835/E
835M
ASTM E 865
ASTM E 883
ASTM E 930
ASTM E 934
ASTM E 969
ASTM E 1001
REV A
ASTM E 1042
ASTM E 1077
ASTM E 1094
ASTM E 1095
ASTM E 1098
ASTM E 1146
ASTM E 1157
ASTM E 1182
ASTM E 1225
ASTM E 1237

ASTM E 1251
ASTM E 1264
ASTM E 1392
ASTM E 1441
ASTM E 1456
ASTM E 1570
ASTM E 1626
ASTM E 1742
ASTM E 2030
ASTM E 2073
ASTM F 36
ASTM F 37
ASTM F 119
ASTM F 141
ASTM F 142
ASTM F 150
ASTM F 152
ASTM F 306
ASTM F 330
ASTM F 387
ASTM F 402
ASTM F 405
ASTM F 410
ASTM F 412
ASTM F 436
ASTM F 436M
ASTM F 437
ASTM F 438
ASTM F 439
ASTM F 441/F
441M
ASTM F 442/F
442M
ASTM F 458
ASTM F 459
ASTM F 467

ASTM F 467M
ASTM F 468
ASTM F 468M
ASTM F 477
ASTM F 480
REV A
ASTM F 483
ASTM F 493
ASTM F 526
ASTM F 536
ASTM F 541
ASTM F 543
ASTM F 560
ASTM F 568
ASTM F 568M
ASTM F 585
ASTM F 593
ASTM F 594
ASTM F 606M
ASTM F 607
ASTM F 670
ASTM F 696
ASTM F 707/F
707M
ASTM F 718
ASTM F 721
ASTM F 726
ASTM F 738
ASTM F 758
ASTM F 765
ASTM F 788/F
788M
ASTM F 791
ASTM F 794
ASTM F 812/F
812M

ASTM F 814
REV B
ASTM F 835
ASTM F 836
ASTM F 836M
ASTM F 841
ASTM F 844
ASTM F 856
ASTM F 858
ASTM F 859
ASTM F 860
ASTM F 861
ASTM F 872
ASTM F 879
ASTM F 879M
ASTM F 880
ASTM F 880M
ASTM F 895
ASTM F 899
ASTM F 906
ASTM F 912
ASTM F 912M
ASTM F 917
ASTM F 918
ASTM F 920
ASTM F 921
ASTM F 941
ASTM F 952
ASTM F 957
ASTM F 959M
ASTM F 960
ASTM F 965
ASTM F 1021

ASTM F 1023
ASTM F 1026
ASTM F 1079
ASTM F 1083
ASTM F 1123
ASTM F 1156
ASTM F 1192
ASTM F 1217
ASTM F 1242
ASTM F 1267
ASTM F 1275
ASTM F 1312
ASTM F 1332
ASTM F 1347
ASTM F 1360
ASTM F 1370
ASTM F 1448
REV A
ASTM F 1602
ASTM F 1700
ASTM F 1783
ASTM F 1793
ASTM G 7
ASTM G 15
REV B
ASTM G 21
ASTM G 22
ASTM G 23
ASTM G 26
ASTM G 28
ASTM G 29
ASTM G 34
ASTM G 47
ASTM G 158

ASTM S I 10
MODUK
AQAP-150
MODUK
AQAP-170
EIA EIA-36471B
EIA EIA-738
EIA EIA/TIA455-170
EIA GEB1
EIA TIA/EIA455-46A
EIA TIA/EIA455-51A
EIA TIA/EIA455-53A
EIA TIA/EIA455-173
IEEE 85
IEEE 200
IEEE 812
IEEE C50.10
IPC D-351
IPC D-352
IPC J-STD006A
NEMA C78.1
NEMA C78.2
NEMA C81.61
NEMA ICS 6
NFPA 1902
NFPA 1903
NFPA 1904
NISO Z39.18

NSF 2
SUPPLEMENT
SAE AIR
1378B
SAE AMS
1424D
SAE AMS
1546B
SAE AMS
2300J
SAE AMS
2518B
SAE AMS
2640J
SAE AMS
2644B
SAE AMS
3135E
SAE AMS
3335D
SAE AMS
4383E
SAE AMS
4845G
SAE AMS
4908F
SAE AMS
5050K
SAE AMS
5053H
SAE AMS
5115H
SAE AMS
5328D
SAE AMS
5355H
SAE AMS
5356B
SAE AMS
5357B
SAE AMS
5678E

SAE AMS
5683F
SAE AMS
5716H
SAE AMS
5732H
SAE AMS
5775D
SAE AMS
5810A
SAE AMS
5840D
SAE AMS
5865D
SAE AMS
5887B
SAE AMS
5888B
SAE AMS
5889B
SAE AMS
5890D
SAE AMS
6257A
SAE AMS
6270N
SAE AMS
6292G
SAE AMS
6294G
SAE AMS
6412L
SAE AMS
6442F
SAE AMS
6455H
SAE AMS
6485G
SAE AMS
6524D
SAE AMS
7261/1F
SAE AMS
7261/2F

SAE AMS
7261D
SAE AMS
7265C
SAE AMS
7440D
SAE AMS-C27725A
SAE AS 1002F
SAE AMS-S7124A
SAE AMS-S83318
SAE AS 1003E
SAE AS 1004E
SAE AS 1005F
SAE AS 1006E
SAE AS 1007E
SAE AS 1008F
SAE AS 1009F
SAE AS 1010E
SAE AS 1035D
SAE AS 7325B
SAE AS 8804A
SAE AS 9141A
SAE AS 9142A
SAE AS 9202A
SAE AS 9203A

SAE AS 9204A
SAE AS 9205A
SAE AS 9218A
SAE AS 9362A
SAE AS 9363A
SAE AS 9364A
SAE AS 9371A
SAE AS 9372A
SAE AS 9373A
SAE AS 9375A
SAE AS 9376A
SAE AS 9454A
SAE AS
18607A
SAE AS
21150C
SAE AS
21151C
SAE AS
21152C
SAE AS
21153C
SAE AS
24333A
SAE AS
24334A
SAE AS
33671B
SAE AS 38386
SAE J 231
SAE J 590

SAE J 607
SAE J 742
SAE J 945
SAE J 1164
SSPC PA
GUIDE 3
UL 563
UL 567
UL 1025
UL 1247
UL 1256
UL 1439
CSA/AM ANSI
Z21.22B-2001
AIA/NAS NA
0167
AIA/NAS NAS
366
ASTM F 1145
ASTM F 993
ASTM C 36/C
36M
ASTM D 1037
ASTM D 892
ASTM B 134/B
134M
ASTM D 2092
CSA/AM
CSA/ANSI
Z83.8
AIA/NAS
NASM91524
AIA/NAS
NASM91525
AIA/NAS
NASM51939

AIA/NAS
NASM21382
AIA/NAS
NASM21384
AIA/NAS
NASM21387
AIA/NAS NAS
1405
AIA/NAS
NASM27976
AIA/NAS
NASM28728
AIA/NAS
NASM51929
AIA/NAS
NASM90120
AIA/NAS NAS
1812
AIA/NAS NAS
1402
AIA/NAS NAS
560
AIA/NAS NAS
1584
AIA/NAS
NASM91522
ASME MH1B
AIA/NAS NAS
1590
ASME
B30.16A
AIA/NAS NAS
1814
AIA/NAS NAS
589
AIA/NAS NAS
5
AIA/NAS NA
0063
AIA/NAS NAS
699
AIA/NAS NAS
369

AIA/NAS NAS
1912
AIA/NAS NAS
1916
AIA/NAS NAS
464
AIA/NAS NAS
372
AIA/NAS NAS
1585
AIA/NAS NAS
528
AIA/NAS NAS
1404
AIA/NAS NAS
587
AIA/NAS NAS
586
AIA/NAS NA
0062
AIA/NAS NAS
1806
AIA/NAS NAS
1583
AIA/NAS NAS
585
AIA/NAS NAS
1786
AIA/NAS NAS
1096
AIA/NAS NAS
1810
AIA/NAS NAS
371
AIA/NAS NAS
1908
AIA/NAS NAS
1816
AIA/NAS NAS
373
AIA/NAS NAS
1403
AIA/NAS NAS
120

AIA/NAS NAS
1406
AIA/NAS NAS
367
AIA/NAS NAS
1240
AIA/NAS NAS
1914
AIA/NAS NAS
363
AIA/NAS NAS
1910
ASME B31.4A
AIA/NAS NAS
365
AIA/NAS NAS
696
AIA/NAS NAS
361
AIA/NAS NA
0165
AIA/NAS NAS
368
AIA/NAS NAS
583
AIA/NAS NAS
362
AIA/NAS NAS
1906
AIA/NAS NAS
519
AIA/NAS NAS
1699
AIA/NAS NAS
590
AIA/NAS NAS
364
AIA/NAS NAS
370
AIA/NAS NA
0166
AIA/NAS NAS
496

AIA/NAS NAS
588
AIA/NAS NAS
584
AIA/NAS NAS
1808
AIA/NAS NAS
1237
AIA/NAS NAS
819
ANSI C78.41
ANSI C80.1
ASTM E 323
ASTM C 33
REV A
ASTM E 864
ASTM D 822
ASTM B 21/B
21M
ASTM F 704
ASTM B 36/B
36M
ASTM B 211M
ASTM D 92
ASTM A 242/A
242M
ASTM D 975
ASTM D 2200
ASTM B 453
ASTM D 611
ASTM PS 93
ASTM D 2700
ASTM D 1385
ASTM D 525
ASTM B 248
ASTM D 4306

ASTM D 2699
ASTM D 1186
ASTM D 2274
ASTM B 122/B
122M
ASTM D 638
ASTM D 1644
ASTM C 233
ASTM D 86
ASTM A 796/A
796M
ASTM C 960/C
960M
ASTM C 140
REV A
ASTM D 1073
ASTM D 1693
ASTM D 3575
ASTM A 516/A
516M
ASTM E 1672
ASTM D 3699
ASTM D 4956
REV A
ASTM B 121/B
121M
ASTM E 55
ASTM B 108
ASTM D 1238
ASTM B 139/B
139M
ASTM D 140
ASTM A 36/A
36M
ASTM D 3578
ASTM D 4562
ASTM D 2084
ASTM D 1655
ASTM C 602
REV A
ASTM D 3170

ASTM B 196/B
196M
ASTM B 69
ASTM D 4801
ASTM D 3577
ASTM B 601
ASTM D 882
ASTM A 588/A
588M
ASTM B 248M
ASTM D 1929
ASTM A 453/A
453M
ASTM D 4485
ASTM E 494
ASTM F 782
ASTM D 2240
ASTM B 247M
ASTM E 648
ASTM F 552
ASTM D 922
REV A
ASTM C 728
ASTM F 446
ASTM A 827/A
827M
ASTM A 710/A
710M
ASTM B 363
ASTM B 135
ASTM B 249/B
249M
ASTM D 2949
ASTM A 668/A
668M
ASTM D 4863
ASTM E 517
ASTM D 1776

ASTM E 801
ASTM D 2106
ASTM F 1325
ASTM D 813
ASTM C 535
ASTM C 131
ASTM F 837M
ASTM B 99/B
99M
ASTM D 396
ASTM C 828
ASTM A 109/A
109M
ASTM E 498
ASTM A 178/A
178M
ASTM D 2239
ASTM F 738M
ASTM D 1091
ASTM B 187
ASTM F 537
ASTM D 4786
ASTM A 492
ASTM A 450/A
450M REV A
ASTM D 1815
ASTM A 423/A
423M
ASTM D 6075
ASTM D 2096
ASTM C 442/C
442M
ASTM F 835M

ASTM B 209M
ASTM D 2098
ASTM E 709
ASTM D 2241
ASTM D 4097
ASTM D 2603
ASTM D 2726
ASTM C 311
ASTM A 131/A
131M
ASTM A 312/A
312M
ASTM B 111
ASTM B 241/B
241M
ASTM E 2072
ASTM A 285/A
285M
ASTM D 3307
ASTM D 4831
ASTM F 1344
ASTM D 816
ASTM B 418
ASTM D
3654/D 3654M
ASTM D 244
ASTM A 529/A
529M
ASTM F 1182
ASTM D 450
ASTM C 475
ASTM C 12
ASTM B 240
ASTM D 2513
ASTM D 6116

ASTM C 507M
ASTM A 278/A
278M
ASTM B 169/B
169M
ASTM D 1740
ASTM D 465
ASTM C 618
ASTM F 1667
ASTM C 836
ASTM C 423
ASTM F 138
ASTM B 197/B
197M
ASTM D 3266
ASTM D 648
ASTM C 827
ASTM A 515/A
515M
ASTM D 2386
ASTM C 110
REV A
AWS B4.0
AWS D10.9
ASTM A 792/A
792M REV A
EIA 748
EIA TIA/EIA455-35A
ASTM D 613
IPC HDBK-001
ISO 9002

ISO 9003
NEMA C78.3
SAE AMS
6478A
SAE AMS
6444J
SAE AMS
6433E
SAE AS 7253B
SAE AMS
5384E
SAE AMS
2362B
SAE AMS
4310D
SAE AMS
2303E
SAE AMS
6532B
SAE AMS
4363F
SAE AS 1227C
SAE AMS
7717D
SAE AMS
6437F
SAE AMS
7903A
SAE AMS
6356E
ASTM B 167
SAE AS 7250B
SAE AMS
5331F
SAE AS 4854
SAE AS 5877
SAE AMS
2301J

SAE AMS
5585F
SAE AMS
7907A
ASTM D 4783
SAE AMS
5578E
SAE AMS
6477A
SAE AMS
5560K
SAE AMS
2405C
ASTM C 55
REV A
SAE AMS
5625D
SAE AMS
5593F
SAE AMS
5036H
ASTM A 153/A
153M REV A
SAE AMS
6543C
SAE AMS
5330D
SAE AMS
4816C
ASTM D 4857
REV A
ASTM F 880
REV A
SAE MAM
2303C
SAE AMS
3870D
SAE AMS
7261/3E
ASTM D 975
REV A

SAE AMS
6354E
SAE AMS
7904B
SAE AMS
5075F
SAE AMS
5080J
ASTM D 225
SAE AMS
5884B
SAE AMS
5525H
SAE AMS
6365J
SAE AMS
3416A
SAE AMS
2759/7A
SAE AMS
5110H
ASTM C 90
REV A
SAE AMS
5637G
SAE AS 5195A
SAE AMS
6518B
SAE AMS
7262C
ASTM B 168
ASTM A 633/A
633M
SAE AMS
5120K
SAE AMS
6454C
SAE AS 3232A
SAE AMS
7906A

SAE AMS
6519B
SAE AMS
5586F
SAE AMS
3815D
SAE AMS
6435D
ASTM D 2700
REV A
ASTM C 652
REV A
SAE AMS
3823D
SAE AMS
7905A
SAE AS 7251B
SAE AMS
6426E
SAE AMS
3821B
SAE AMS
5544H
ASTM A
1008/A 1008M
REV A
ASTM D 2699
REV A
SAE AS 4393B
SAE AS
91001A
SAE AMS
3880C
ASTM D 4300
SAE AMS
6520D
SAE AMS
5608E
SAE AMS
5672C
UL 521
BULLETINS

ASTM D 4101
REV A
UL 1244
BULLETINS
ASTM D 2274
REV A
ASTM A 615/A
615M REV B
ASTM E 200
ASTM D 2837
ASTM F 836M
REV A
ASTM C 129
ASTM A 494/A
494M REV A
ASTM D 4066
REV A
ASTM E 143
ASTM F 467
REV A
ASTM D 1552
ASTM A 500
REV A
ASTM D 974
ASTM A 463/A
463M REV A
ASTM D 4814
REV A
ASTM D 897
ASTM D 2983
ASTM F 468M
REV A
ASTM B 173
REV A
ASTM A 760/A
760M REV A

ASTM D 2112
REV A
ASTM E 83
ASTM C 901
ASTM F 467M
REV A
ASTM B 69
REV A
ASTM D 3878
ASTM A 48/A
48M
ASTM F 880M
REV A
ASTM C 127
ASTM B 411/B
411M
ASTM D 1159
ASTM A 123/A
123M REV A
ASTM D 3832
ASTM D 3790
ASTM B 166
ASTM A 234/A
234M
ASTM F 837
ASTM E 74
ASTM D 4020
ASTM D 1932
ASTM D 3182
ASTM F 949
REV A
ASTM D 2680
ASTM D 3453
ASTM A 579
ASTM D 3241
ASTM D 1831

ASTM D 2287
ASTM D 3017
ASTM C 685/C
685M
ASTM F 141
REV A
ASTM C 139
ASTM A 673/A
673M
ASTM A 466/A
466M
ASTM C 272
ASTM D 6018
ASTM D 3035
ASTM D 2513
REV A
ASTM A 755/A
755M
ASTM C 128
AWS
D1.1/D1.1M
EIA EIA-36410A
EIA EIA-36442B
EIA EIA-36453B
EIA EIA-36483
EIA EIA-36422B
EIA EIA-36423B
EIA EIA-343-A
EIA EIA-36445A
IPC J-STD001C
SAE AMS
5902B
SAE AS 683C

SAE AMS
5655E
SAE AMS
5689F
SAE AMS
6382M
SAE AMS
5737N
SAE AMS
5604E
SAE ARP 868C
SAE AMS
5613R
SAE AS 9360A
SAE AS 871B
SAE AMS
4507H
SAE AMS
5504L
SAE AMS
5339E
SAE AMS
2401F
SAE AMS
5649F
SAE MA
3302A
SAE AMS
5694H
SAE AMS
5805G
SAE AMS
5506F
SAE AMS
5798E
SAE AMS
5697E
SAE AMS
5560L
SAE AMS
6373F

SAE AMS
4926K
SAE AMS
4111C
SAE AMS
5731K
SAE AMS
5505E
SAE AMS
5839A
SAE AMS
5553F
SAE MA
3354A
SAE AMS
5614E
SAE MA
3304A
SAE AMS
5836B
SAE AMS
4143D
SAE AMS
5674E
SAE AMS
6257B
SAE AMS
5734J
SAE AMS
5830B
SAE AMS
6438E
SAE AMS
5077F
SAE MA
3353A
SAE AMS
5778E
SAE AMS
5831B
SAE AMS
5819A
SAE AS 1001F

SAE AMS-C83231A
SAE AMS
2486C
SAE ARP
1902A
SAE AMS
5854A
SAE MAP
1753A
SAE AMS
6378F
SAE AMS
6370L
SAE AMS
5828G
SAE AMS
5675E
SAE AMS
4984B
SAE AMS
5823E
SAE AMS
5914A
SAE AMS
2406K
SAE AMS
6422G
SAE AS 9358A
SAE AS 9374A
SAE MA
3339A
SAE AMS
5832F
SAE AMS
7718E
SAE AMS
7445D
SAE AMS
5635E
SAE AMS
6278B

SAE AMS
5337C
SAE AS 686B
SAE AS
92001A
UL 749
BULLETINS
ACI 347
ASTM A 480/A
480M REV A
ASTM D 2949
REV A
ASTM D 3145
ASTM D 3295
ASTM D 3577
REV A
ASTM D 3578
REV A
ASTM D
3652/D 3652M

Title
Aluminum Standards and Data
Specifications for AluminumSheet Metal Work in Building Construction Construction Manual Series Section5
Fourth Edition
Designation System forAluminum Finishes
Standards for AnodizedArchitectural Aluminum
Voluntary Specifications forAluminum and Poly (Vinyl Chloride) (PVC) Prime Windows and Glass
Doors(Replaces AAMA 101V-86 and GS-001)
Methods of Test for ExteriorWalls
Voluntary Guide Specificationsand Inspection Methods for Integral Color Anodic Finishes for
ArchitecturalAluminum
Voluntary Guide Specificationand Inspection Methods for Clear Anodic Finishes for Architectural Aluminum
Voluntary Guide Specificationand Inspection Methods for Electrolytically Deposited Color Anodic Finishesfor
Architectural Aluminum
Voluntary Guide Specificationfor Cleaning and Maintenance of Architectural Anodized Aluminum
Voluntary Guide Specificationfor Cleaning and Maintenance of Painted Aluminum Extrusions and Curtain
WallPanels
Voluntary Specifications andTest Methods for Sealants
Voluntary Specifications forAluminum Storm Doors
Fiber Analysis: QualitativeEditorially Revised 1988; Related to ISO 3072
Water Repellency: Tumble JarDynamic Absorption Test
Water Resistance: HydrostaticPressure Test Related to ISO 811
Instrument Ball BearingsMetric Design R(1998)
Instrument Ball Bearings InchDesign R(1998)
Needle Roller Bearings Radial,Metric Design R(1994)
Needle Roller Bearings Radial,Inch Design R(1993)
Tapered Roller Bearings -Radial Metric Design R(1993)
Tapered Roller Bearings -Radial Inch Design R(1999)
Radial Bearings of Ball,Cylindrical Roller and Spherical Roller Types Metric Design
Spherical Plain RadialBearings, Joint Type Metric Design R(1999)
Spherical Plain RadialBearings, Joint Type Inch Design R(1999)
Thrust Bearings of TaperedRoller Type - Inch Design R(1999)
Thrust Bearings of Ball,Cylindrical Roller and Spherical Roller Types - Metric Design R(1999)
Thrust Bearings of Ball andCylindrical Roller Types - Inch Design R(1999)
Rolling Bearings, LinearMotion Recirculating Ball, Sleeve Type Inch Series R(1999)
Thin Section Ball BearingsInch Design
Cooling and Insulating Systemsfor Mass Concrete R(1998)
Erosion of Concrete inHydraulic Structures R(1998)
Standard Practice forSelecting Proportions for Normal, Heavyweight, and Mass Concrete R(1997)
Recommended Practice forEvaluation of Strength Test Results of Concrete R(1997)
Batching, Mixing, and JobControl of Lightweight Concrete R(1997)
Standard Specification forCold Weather Concreting R(1998)
Cold Weather ConcretingR(1997)
Standard Practice for CuringConcrete R(1997)

Building Code Requirements forStructural Concrete (ACI 318-99) and Commentary (ACI 318R-99)
Suggested Analysis and DesignProcedures for Combined Footings and Mats R(1993)
Standard Specification forCast-In-Place Nonreinforced Concrete Pipe R(1997)
Recommendations forCast-In-Place Nonreinforced Concrete Pipe R(1997)
Standard Specifications forStructural Concrete (ACI 301-96) with Selected ACI and ASTM
ReferencesSYNOPSIS ONLY
Standard Specification forBonding Hardened Concrete, Steel, Wood, Brick, and Other Materials toHardened
Concrete with a Multi-Component Epoxy Adhesive R(1997)
Use of Epoxy Compounds withConcrete R(1998)
Guide to Shotcrete R(1995)
Measurement of Properties ofFiber Reinforced Concrete R(1999)
ACI Detailing Manual
Cement and ConcreteTerminology
Guide for Making a ConditionSurvey of Concrete in Service R(1997)
Guide to Durable ConcreteR(1997)
Mass Concrete
Effect of Restraint, VolumeChange, and Reinforcement on Cracking of Mass Concrete
Standard Practice forSelecting Proportions for Structural Lightweight Concrete
Guide for SelectingProportions for No-Slump Concrete Supersedes ACI 211.3 - 75
Guide for StructuralLightweight Aggregate Concrete R(1999)
Guide for Use of Normal Weightand Heavyweight Aggregates in Concrete
Standard Practice for the Useof Shrinkage- Compensating Concrete
Control of Cracking inConcrete Structures
Specifications for StructuralConcrete
Guide for Concrete Floor andSlab Construction
Guide to Cast-In-PlaceArchitectural Concrete Practice
Placing Concrete by PumpingMethods
Heavyweight Concrete:Measuring, Mixing, Transporting, and Placing
Placing Concrete with BeltConveyors
Guide for Measuring, Mixing,Transporting, and Placing Concrete
Hot Weather Concreting
Guide for Consolidation of Concrete
Guide for Concrete Inspection
Guide to Formwork for ConcreteR(1999)
Committee Report on FiberReinforced Shotcrete
Specification for Shotcrete
Guide to Certification ofShotcrete Nozzlemen
Guide to the Use ofWaterproofing, Dampproofing, Protective, and Decorative Barrier Systems forConcrete
(Revised 1985)
Accelerated Curing of Concreteat Atmospheric Pressure - State of the Art
Specification for MasonryStructures and Commentary ASCE 6-99/TMS 602-99
Fiber Reinforced Concrete
Alloy for Dental Amalgam:Addendum Included, Supplement 1A-1979 (R 1993)
Specification No. 8 for ZincPhosphate Cement (R 1987)

Dental Zinc Oxide-EugenolCements and Zinc Oxide Non- Eugenol Cements

(Withdrawn) Ductile-IronFittings 3-Inch Through 24- Inch, for Gas Revision of ANSI A21.14-1984
Relief Valves for Hot WaterSupply Systems First Edition; CSA 4.4-M99
Quick Disconnect Devices forUse with Gas Fuel Appliances First Edition; CSA 6.9-M98
Quick Disconnect Devices forUse with Gas Fuel Appliances First Edition; CSA 6.9-M98; Addenda toZ21.411998
Gas-Fired Central FurnacesSecond Edition; CSA 2.3-M98
Gas-Fired Central FurnacesSecond Edition; Addenda to ANSI Z21.47-1998; CSA 2.3-M98
Gas-Fired Central FurnacesSecond Edition; Addenda to ANSI Z21.47-1998; CSA 2.3-M98
Gas Water Heaters Volume I,Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less
FirstEdition; CSA 4.1-M98
Gas Water Heaters Volume I,Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less
FirstEdition; CSA 4.1-M98; Addenda to Z21.10.1-1998
Gas Water Heaters Volume I -Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less
FirstEdition; CSA 4.1-M98; Addenda to Z21.10.1-1998
Gas Appliance PressureRegulators Second Edition; CSA/CGA 6.3-2000

Automatic Vent Damper Devicesfor Use with Gas-Fired Appliances First Edition; CSA/CGA 6.14-M96

Gas-Fired Low-Pressure Steamand Hot Water Boilers Twenty-Second Edition R(1998)

Gas-Fired Low-Pressure Steamand Hot Water Boilers
Gas-Fired Low-Pressure Steamand Hot Water Boilers
(Withdrawn) Direct VentCentral Furnaces Fourth Edition Superseded by Z21.47-1993
(Withdrawn) Direct VentCentral Furnaces Addenda to Z21.64-1990; Superseded by Z21.47-1993
Gas Unit Heater and Gas-FiredDuct Furnaces First Edition; CGA 2.6-M96; Addenda Z83.8a-1998;
AddendaZ83.8b-2000; Corrected Replacement June 04 2001

Gas Food Service EquipmentFirst Edition; CGA 1.8-M96; Supersedes Z83.12-1994, Z83.13-1994, Z83.141994and Z83.15-1994; Addenda Z83.11a-1997
Addenda to Z83.11-1996 GasFood Service Equipment First Edition; CSA/CGA 1.8B-2000

Gas Utilization Equipment inLarge Boilers First Edition; Revision of Z21.30-1950 R(1995)
Gas Utilization Equipment inLarge Boilers R(1989)
Gas Utilization Equipment inLarge Boilers R(1989)
Gas-Fired Infrared Heaters
Gas-Fired Infrared Heaters
(Withdrawn) Gas Food ServiceEquipment (Baking and Roasting Ovens) First Edition; (CGA 1.10M94)Superseded by Z83.11-1996
(Withdrawn) Gas Food ServiceEquipment (Deep Fat Fryers) First Edition; (CGA 1.9-M94) Superseded by
Z83.11-1996
(Withdrawn) Gas Food ServiceEquipment (Counter Appliances) First Edition; (CGA 1.11-M94) Superseded
byZ83.11-1996
(Withdrawn) Gas Food ServiceEquipment (Kettles, Steam Cookers and Steam Generators) First Edition;
(CGA1.15- M94) Superseded by Z83.11-1996
Metric Usage
Geometry Factors forDetermining the Pitting Resistance and Bending Strength of Spur, Helical
andHerringbone Gear Teeth Revision of 226.01 R(1995)
Gear Classification andInspection Handbook Tolerances and Measuring Methods for Unassembled Spur
andHelical Gears (Including Metric Equivalents) Errata - 07/90; Err
Fundamental Rating Factors andCalculation Methods for Involute Spur and Helical Gear Teeth
Rating the Pitting Resistanceand Bending Strength of Generated Straight Bevel, Zerol Bevel, and SpiralBevel
Gear Teeth
Gear Materials and HeatTreatment Manual Revision of 240.01
Design Manual for Bevel Gears
Cylindrical WormgearingTolerance and Inspection Methods Replacement of AGMA 390.03a
Design and Selection ofComponents for Enclosed Gear Drives
Standard for Spur, Helical,Herringbone and Bevel Enclosed Drives

Shaft Mounted and ScrewConveyor Drives Using Spur, Helical and Herringbone Gears Revision of
480.06;Revised by ANSI/AGMA 6109-A00 and ANSI/AGMA 6009-A00 R(1994)
Practice for EnclosedCylindrical Wormgear Speed Reducers and Gearmotors
Standard for Gearmotor, ShaftMounted and Screw Conveyor Drives Metric Edition; Revision of
ANSI/AGMA6019-E89 and 6021-G89
Flexible Couplings - PotentialUnbalance Classification Revision of 515.02 R(1996)
Bores and Keyways for FlexibleCouplings (Inch Series) Redesignation of AGMA 518.xx; Supersedes
511.02,512.03, 513.01 R(1994)
Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric
Rivet - Countersunk Head 100Deg. Superseded - December 1941 Cancelled - October 1989 (Use AN 426)
(Rev.1)
Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric
Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric
Bolt-Machine, AircraftRevision 1; FSC 5306
Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric
Bolt - Machine, AircraftRev.1; FSC 5306
Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric
Bolt - Machine, AircraftRev.1; FSC 5306
Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric
Bolt - Machine, AircraftRev.1; FSC 5306
Procurement SpecificationMetric Fasteners, Titanium Alloy, Externally Threaded, 1100 MPa Tensile, 660MPa
Shear (Rev. 2)
Bolt - Machine, AircraftRev.1; FSC 5306
Procurement SpecificationMetric Fasteners, Alloy Steel, Externally Threaded, 1100 MPa Tensile, 660
MPaShear (Rev. 2)
Bolt - Machine, AircraftRev.1; FSC 5306
Nuts, Self Locking, 235Degrees C, Metric, Procurement Specification for (Rev. 2)
Bolt - Machine, AircraftRev.1; FSC 5306

Bolt - Machine, AircraftRev.1; FSC 5306

Stud - Coarse Thread Rev.4;FSC 5307
Bolt - Machine, AircraftRev.1; FSC 5306
Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric
Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric
Bolt - Machine, AircraftRev.1; FSC 5306
Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric
Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric
Bolt - Machine, AircraftRev.1; FSC 5306
Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric
Bolt - Machine, AircraftRev.1; FSC 5306
Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric
Bolt - Machine, AircraftRev.1; FSC 5306
Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric
Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric
Bolt - Machine, AircraftRev.1; FSC 5306
Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric
Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric
Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305
Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305
Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305
Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305

Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305
Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305
Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305
Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305
Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric
Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric
Recess - Torq-Set Dimensionsof Recess, Gage and Driver, Metric (Rev. 2)
Rivet, Blind, Self-PluggingMechanically Locked Spindle, Bulbed (Rev. 7)
Procurement Specification,Metric Fasteners, A-286 CRES Externally Threaded, 1100 MPa Tensile, 660
MPaShear (Rev. 2)
Nut, Self-Locking, Floating,Plate, Two- Lug, Metric Low Height, C'Bored, 1100 MPa 235 Degrees C,
425Degrees C (Rev. 2)
Nut, Self-Locking, Floating,Plate, Two- Lug, Metric Low Height, C'Bored, 1100 MPa 235 Degrees C,
425Degrees C (Rev. 2)
Nut, Self-Locking, SplineDrive, 1250 MPa, 235 DEG C, 425 DEG C, Metric (Rev. 2)
Nut, Self-Locking, SplineDrive, 1250 MPa, 235 DEG C, 425 DEG C, Metric (Rev. 2)
Nut, Self-Locking, HexagonExtended Washer 1100 MPa, Metric, 235 Degrees C, 425 Degrees C (Rev. 2)
Nut, Self-Locking, HexagonExtended Washer 1100 MPa, Metric, 235 Degrees C, 425 Degrees C (Rev. 2)
Screw, Close Tolerance PanHead Offset Cruciform Recess Alloy Steel, 1100 MPa, Metric (Rev. 2)
Bolt, Close Tolerance, HexagonHead Alloy Steel 1100 MPa Metric Rev. 4
Bolt, Close Tolerance, HexagonHead, Titanium Alloy 1100 MPa Metric (Rev. 2)
Screw, Close Tolerance, 100Degree Flush Head Offset Cruciform Recess Alloy Steel 660 MPa Shear
Metric(Rev. 3)
Screw, Close Tolerance, 100Deg. Flush Head, Offset Cruciform Recess, Titanium Alloy, 660 MPa,
Shear,Metric (Rev. 4)
Nut, Self-Locking, Plate, TwoLug, Fixed Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425 Degrees
C(Rev. 1)
Nut, Self-Locking, Plate, TwoLug, Fixed Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425 Degrees
C(Rev. 1)

Screw, Close Tolerance, 100Degree Flush Head, Offset Cruciform Recess A-286 CRES 660 MPa Shear
Metric(Rev. 3)
Spacer, Sleeve-Rivet (Rev. 9)
Bolt, Eye FSC 5306
Spacer, Sleeve - Screw andBolt (Segments Inactive for New Design) Rev. 10
Bolt, Eye FSC 5306
Nut, Self Locking, 425 DegreesC, Metric, Procurement Specification for (Rev. 2)
Bolt, Eye FSC 5306
Bolt, Close Tolerance, HexagonHead, A-286 CRES 1100 MPa Metric (Rev. 3)
Bolt, Eye FSC 5306
Screw, Close Tolerance PanHead Offset Cruciform Recess A-286 CRES 1100 MPa Metric (Rev. 2)
Bolt, Eye FSC 5306
Screw, Close Tolerance PanHead Offset Cruciform Recess Titanium Alloy 1100 MPa, Metric (Rev. 2)
Spacer, Sleeve, Nonmetallic,Epoxy and Phenolic, Screw and Bolt (Rev. 1)
Bolt, Eye FSC 5306
Bolt, Eye FSC 5306
Nut, Self-Locking, CastellatedReduced Hexagon, 600 MPa, Metric, 235 Degrees C (Rev. 1)
Bolt, Eye FSC 5306
Nut, Self-Locking,Castellated, Reduced Hexagon, 1100 MPa Tensile, Metric 235 Degrees C (Rev. 1)
Rivet - Solid, Universal Head,A286 Corrosion Resistant Steel, Metric (Rev. 1)
Rivet - Solid, Universal Head,Monel, Metric
Rivet - Solid, Countersunk 100Degree Head, A286 Corrosion Resistant Steel, Metric
Rivet - Solid, Countersunk 100Degree Head, Monel, Metric

Rivet - Solid, ReducedCountersunk 100 Degree Head, A286 Corrosion Resistant Steel, Metric
Rivet - Solid, ReducedCountersunk 100 Degree Head, Monel, Metric
Procurement Specification,Metric Fasteners, Alloy Steel, Externally Threaded, 1250 MPa Tensile, 750
MPaShear (Rev. 2)
Bolt, Close Tolerance, SplineDrive, Alloy Steel, 1250 MPa, Metric (Rev. 2)
Bolt, Close Tolerance, SplineDrive, A286 CRES, 1250 MPa Metric (Rev. 2)
Screw, Close Tolerance, 100Degree Flush Head, Offset Cruciform Recess Alloy Steel 750 MPa Shear,
Metric(Rev. 3)
Nut, Self-Locking, Plate,Two-Lug, Low Height, Steel, 125 KSI Ftu, 450 Degrees F Rev.1; FSC 5310
Washer, Countersunk and Plain,for Use with Bolts and Nuts up to and Including 260 KSI Ftu Rev.1; FSC 5310
Strap, Retaining, Two Hole,for Pipe, Conduit, and Cable Rev.1; FSC 5340
Strap, Retaining, Two Hole,for Tubing Rev.1; FSC 5340
Nut, Self-Locking, SplineDrive, Alloy Steel, 1800 MPa, 235 Degrees C, Metric Cancelled - November
1994(Rev. 3)
Nut, Plain, Clinch(Self-Clinching, Round) Rev.1; FSC 5310

Nut, Thin, with OptionalLockwire Hole, Metric (Rev. 1)

Nut, Thin, with OptionalLockwire Hole, Metric (Rev. 1)
Nut, Thin, with OptionalLockwire Hole, Metric (Rev. 1)
Screw, Dual, Wrenching, HexHead/Offset Cruciform, A286 CRES, Full Thread, 1100 MPa - Metric (Rev. 5)
Screw, Machine, Pan Head,Offset Cruciform, A286 CRES Full Thread 1100 MPa - Metric (Rev. 6)
Screw, Cap, Hexagon SocketHead, Full Thread, A-286 CRES, 1100 MPa, Metric (Rev. 3)
Screw, Machine, 100 DegreeFlush Head, Offset Cruciform Recess, Full Thread, A286 CRES, 1100 MPa
Metric(Rev. 1)
Bolt, Alloy Steel 1550 MPaTensile, Procurement Specification (Rev. 1)
Bolt, Alloy Steel 1800 MPaTensile, Procurement Specification (Rev. 1)

Bushing-Clamp-Up, Steel,Chrome Plated (Rev. 5)

Nut, Self-Locking, Plate, OneLug, Metric, Floating Low Height, C'Bored, 1100 MPa 235 Degrees C,
425Degrees C (Rev. 1)
Bushing-Clamp-Up, Steel,Cadmium Plated (Rev. 7)
Nut, Self-Locking, Plate, OneLug, Metric, Floating Low Height, C'Bored, 1100 MPa 235 Degrees C,
425Degrees C (Rev. 1)
Bushing-Clamp-Up, Bronze (Rev.5)
Bushing-Plain, Press Fit,Steel (Rev. 6)
Bushing-Plain, Press Fit,Copper & Bronze Rev. 8
Nut, Self-Locking, Plate,Fixed, One Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235
Degrees C, 425 Degrees C (Rev. 1)
Bushing-Flanged, Press FitSteel, Bronze, & Copper Rev. 9
Nut, Self-Locking, Plate,Fixed, One Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235
Degrees C, 425 Degrees C (Rev. 1)
Nut, Self-Locking, Plate,Fixed, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235
Degrees C, 425 Degrees C (Rev. 1)
Nut, Self-Locking, Plate,Fixed, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235
Degrees C, 425 Degrees C (Rev. 1)
Nut, Self-Locking, Plate,Fixed, Corner Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235
Degrees C, 425 Degrees C (Rev. 1)
Nut, Self-Locking, Plate,Fixed, Corner Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235
Degrees C, 425 Degrees C (Rev. 1)
Nut, Self-Locking, Plate,Fixed, Side by Side Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa,Metric
235 Degrees C, 425 Degrees C (Rev. 1)
Nut, Self-Locking, Plate,Fixed, Side by Side Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa,Metric
235 Degrees C, 425 Degrees C (Rev. 1)
Nut, Self-Locking, Plate,Floating, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa,Metric
235 DEG C, 425 DEG C (Rev. 2)
Nut, Self-Locking, Plate,Floating, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa,Metric
235 DEG C, 425 DEG C (Rev. 2)
Nut, Self-Locking, Plate,Floating, Side by Side, Reduced Rivet Spacing, Low Height, C'Bored, 900
MPa,Metric, 235 Degrees C, 425 Degrees C (Rev. 3)
Nut, Self-Locking, Plate,Floating, Side by Side, Reduced Rivet Spacing, Low Height, C'Bored, 900
MPa,Metric, 235 Degrees C, 425 Degrees C (Rev. 3)
Screw, Pan Head, OffsetCruciform Recess, Full Thread, Alloy Steel, 1100 MPa, Metric (Rev. 1)
Screw, Pan Head, OffsetCruciform Recess, Full Thread, Titanium Alloy, 1100 MPa Metric (Rev. 1)

Screw, 100 Degree Flush Head,Offset Cruciform Recess Full Thread, Alloy Steel, 1100 MPa, Metric (Rev. 1)
Screw, 100 Degree Flush Head,Offset Cruciform Recess Full Thread, Titanium Alloy, 1100 MPa, Metric
(Rev.1)
Nut, Self-Locking, Floating,Plate, Corner Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425Degrees
C (Rev. 1)
Nut, Self-Locking, Floating,Plate, Corner Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425Degrees
C (Rev. 1)
Nut, Self-Locking, Plate,Corner Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425 Degrees C(Rev.
1)
Nut, Self-Locking, Plate,Corner Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425 Degrees C(Rev.
1)
Screw, Hex Head OffsetCruciform Titanium, Full Thread, 1100 MPa, Metric (Rev. 5)
Screw, Hex Head OffsetCruciform Alloy Steel, Full Thread, 1100 MPa, Metric (Rev. 6)
Bracket, 90 Degree Angle,2-Bolt Attach, Metric
Bracket, 90 Degree Angle,2-Bolt Attach, Metric
Bracket, 90 Degree Angle,2-Rivet Attach, Metric
Knob-Control, 1 Inch Spherical(Rev. 5) R(1992)
Bracket, 90 Degree Angle,2-Rivet Attach, Metric
Screw, Close Tolerance, 100Deg. Reduced Crown Head, Offset Cruciform Recess, Alloy Steel, 660 MPa
Shear,Metric (Rev. 5)
Knob-Control, 1 Inch Dia. X5/8 Oval, Plastic (Rev. 5) R(1992)
Screw, Close Tolerance, 100Deg. Reduced Crown Head, Offset Cruciform Recess, A-286 CRES, 660 MPa
Shear,Metric (Rev. 5)
Screw, Close Tolerance, 100Deg. Reduced Crown Head, Offset Cruciform Recess, Titanium, 660 MPa
Shear,Metric (Rev. 5)
Bolt, Adjusting, Crown HexagonHead, Alloy Steel, Full Thread, 1100 MPa, Metric
Screw, Captive, 100 DegreeFlush Head, Offset Cruciform Recess Alloy Steel, 660 MPa Shear, Metric (Rev.1)
Screw, Captive, 100 DegreeFlush Head, Offset Cruciform Recess A-286 CRES, 660 MPa Shear, Metric (Rev.1)
Screw, Captive, 100 DegreeFlush Head, Offset Cruciform Recess, Titanium, 660 MPa Shear, Metric (Rev. 2)
Screw, Captive, Pan Head,Offset Cruciform Recess Alloy Steel, 660 MPa Shear, Metric (Rev. 1)

Screw, Captive, Pan Head,Offset Cruciform Recess A- 286 CRES, 660 MPa Shear, Metric (Rev. 1)
Screw, Captive, Pan Head,Offset Cruciform Recess Titanium, 660 MPa Shear, Metric (Rev. 1)
Nut, Self-Locking, Barrel,Floating, 1550 MPa, Metric (Rev. 2)
Retainer, Nut, FloatingBarrel, Metric
Washer, Dimpled, 100 Degree,Metric
Washer, Dimpled, 100 Degree,Metric
Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 KSI Ftu,
Replaceable Nut Element, 1/64 Oversize Rapair FSC 5310
Dial, Control, Multiturn Counters, Vernier, 1.81 Diameter FSC 5355

Dial, Control, Multiturn Counters, Vernier, 1.75 Diameter FSC 5355

Dial, Control, Multiturn Counters, 10 - Turn Counter, Concentric (1.810 - Inch Diameter) FSC 5355

Dial, Control, Multiturn Counters, Vernier, 1.16 Diameter FSC 5355

Dial, Control, Multiturn Counters, Three Digits FSC 5355

Dial, Control, Multiturn Counters, Three Digit, Illuminated and Nonilluminated FSC 5355

Dial, Control, Multiturn Counters, 100 - Turn Counters, 4 - Digit FSC 5355

Dial, Control, Multiturn Counters, Vernier, .88 Diameter FSC 5355

Knobs, Control (for Use with Electronic, Communications, and Allied Equipment) FSC 5355
Knob, Control, Ball FSC 5355
Knob, Control, Oval Tapered FSC 5355

Knob, Control, Tapered FSC 5355

Knob, Control, Round, Edge Lighted and Non-Edge Lighted FSC 5355
Knobs-Control, Plastic (Round, Concentric, Pointer, Spinner, Spinner Slip-Clutch, Bar, Tactile, Knob Lock
Pointer, Slip-Clutch, and Knob Locks) FSC 5355
Electric Lamps - Microfilm Projection Lamps - Two-Inch (51mm) Dichroic Coated Integral Reflector, Rim
Reference, Tungsten Halogen Lamps with GX5.3 Bases Consolidation
Floor Drains and Trench Drains Revision and Redesignation of ASME A112.21.1M-1991 R(1998)
Engineering Drawing Practices
Standard Specification for Forged or Rolled Alloy- Steel Pipe Flanges, Forged Fittings, and Valves and Parts
for High-Temperature Service
Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service R(2001)
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature
Service, or Both
Standard Specification for General Requirements for Steel Plates for Pressure Vessels
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and HeatExchanger Tubes
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High
Temperature Service
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes

Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled,
General Requirements for

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet
Piling
Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
Standard Specification for Steel Wire, Plain, for Concrete Reinforcement AASHTO No: M 32
Standard Specification for High-Silicon Iron Pipe and Fittings
Standard Specification for Aluminum-Alloy Permanent Mold Castings
Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
Standard Guide for Engineering Chromium Electroplating
Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
E(2001)
Standard Specification for General Requirements for Wrought Copper Alloy Wire
Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
Standard Specification for Copper Alloys in Ingot Form E(2002)
Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat
Exchangers
Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and
Arches
Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Standard Specification for Mortar for Unit Masonry
Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular
Form
Standard Specification for Structural Clay Non-Load- Bearing Tile R(2001)
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Standard Terminology Relating to Concrete Pipe and Related Products
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens from Cementitious
Mixtures
Standard Test Method for Permanganate Time of Acetone and Methanol R(2001)
Standard Test Method for Carbon Black - Iodine Adsorption Number
Standard Practice for Preparing Coal Samples for Analysis
Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) IP Designation: 319/84 (89)
Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
Standard Test Method for Carbon Black-Oil Absorption Number
Standard Specification for Round Timber Piles E(2001)
Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor E(2001)
R(2001)
Standard Test Method for Biodegradability of Alkylbenzene Sulfonates R(2001)
Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic
Resonance Spectrometry IP Designation: 338/98
Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels R(2001)
Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
Standard Classification System for Specifying Plastic Materials
Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
Standard Specification for Performance of Engine Oils
Standard Specification for Road Tar R(2001)
Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
Standard Test Methods for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical
Insulation Materials
Standard Test Methods for Liquid Paint Driers R(2002)
Standard Specification for Liquid Paint Driers R(2001)
Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon
Solvents IP Designation: 2/98
Standard Terminology Relating to Soil, Rock, and Contained Fluids
Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration British Standard
4457; IP Designation: 177/96
Standard Test Methods for Friction Tapes
Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions R(1997)
Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils E(2002)
Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from
Manufactured Organic-Base Fibers
Standard Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method Method
Standard No. 791b E(2001)
Standard Specification for ASTM Thermometers
Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness Vickers Hardness,
Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scle
Standard Test Methods for Tension Testing of Metallic Materials
Standard Test Methods for Tension Testing of Metallic Materials (Metric)
Standard Specification for Frying and Braising Pans, Tilting Type R(2001)
Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

Standard Specification for Kettles, Steam-Jacketed, 32 Oz to 20 Gal (1 to 75.7 L), Tilting, Table Mounted,
Direct Connected, Gas Fired and Electric Fired R(2001)
Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
Standard Specification for Tungsten Wire for Electron Devices and Lamps R(2002)
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural
Fasteners [Metric]
Addenda to Z83.11-1996 Gas Food Service Equipment First Edition; CSA/CGA 1.8a-M97

Addenda to Z83.8-1996 Gas Unit Heater and Gas-Fired Duct Furnaces First Edition; CSA/CGA 2.6a-M98

FOTP-188 Low Temperature Testing of Fiber Optic Components R(2001)

Optical Fiber Cable Color Coding
Water Heaters, Hot Water Supply Boilers, and Heat Recovery Equipment Printed 01/15/2002
Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
(Noncurrent) Carburizing Carbon and Low-Alloy Steel Parts
(R) Sealing Compound Aircraft Firewall
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 50Au - 25Pd - 25Ni 2015 to 2050
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915
Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed UNS R56400
Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10%
Reduction UNS N09902
(Noncurrent) Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr - 10.5Ni - 0.90
(Cb+Ta) Solution Heat Treated UNS J92641; Reaffirmed Noncurrent
(Noncurrent) Alloy Castings, Investment, Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni- 5.0W as Cast
UNS R30023; Reaffirmed Noncurrent January 2002
(Noncurrent) Alloy Castings, Investment, Corrosion and Heat Resistant 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vacuum Melted, Vacuum Cast
(Noncurrent) Alloy Castings, Investment, Corrosion and Heat Resistant 59Ni - 12.6Cr - 9.0Co - 1.9Mo - 4.2W 4.0Ti - 4.2Ta - 3.4Al - 0.015B - 0.10Zr - 0.90Hf Vacuum M

Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 12.5Cr (SAE 51410) Annealed UNS S41000
Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si Solution
Heat Treated UNS N08330
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum
Induction Plus Consumable Electrode Melted Solution Heat T
Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining,
Solution Heat Treated UNS S34720 Type 1; UNS S34723 Type 2
Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Annealed UNS N06600
Steel, Corrosion-Resistant, Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated UNS S30400
Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb 0.15N - 31Fe Solution and Precipitation Heat Treated UNS R3
(Noncurrent) Alloy Welding Electrodes, Covered, Corrosion and Heat Resistant 75Ni - 15Cr - 1.5 (Cb + Ta) 1.9Ti - 0.55Al - 5.5Fe UNS N07750; Reaffirmed Noncurrent Ja
Steel Bars, Forgings, and Tubing 1.2Cr - 3.25 Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Electroslag Remelted or
Consumable Electrode Vacuum Remelted UNS G93106
Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment
Controlled Packaging UNS G86200
Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable
Electrode Vacuum Remelted
Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable
Electrode Vacuum Melted UNS K32550
Steel, Bars, Forgings, and Tubing 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) Vacuum Consumable
Electrode Melted UNS K24728
Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Stamping Quality UNS K95000
Packing, Preformed, Hydraulic, +275 Degrees F ("O"Ring) FSC 5331
(R) Nut, Self-Locking, Plate, One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F FSC
5310; UNS S66286
(R) Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800
Degrees F UNS S66286; FSC 5310
(R) Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286 Class: 125
ksi/800 Degrees F FSC 5310; UNS S66286
(R) Nut, Self-Locking, Plate, Side by Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125
ksi/800 Degrees F UNS S66286; FSC 5310
(R) Fitting, Sleeve, Flared FSC 4730; Should Be Used Instead of MS20819G, Which Was Cancelled on 28
September 1999
(R) Fitting, Union, Tube, .375 Bulkhead FSC 4730; Should Be Used Instead of AN832 and MS24393 That
Were Cancelled on 11 February 2000
Bearings, Plain, Rod End, Self-Aligning, Self- Lubricating, General Specification for

(R) Screw, Machine, Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi min, .
1380-40 UNJF-3A FSC 5305; UNS K14675
(R) Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, UNS K14675, 195 ksi
min, .1640-36 UNJF-3A FSC 5305; UNS K14675
(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .
1900- 32 UNJF-3A FSC 5306; UNS K14675
(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .
2500- 28 UNJF-3A FSC 5306; UNS K14675
(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head Steel, UNS K16475, 195 ksi min, .
3125-24 UNJF-3A FSC 5306; UNS K14675
(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .
4375- 20 UNJF-3A FSC 5306; UNS K14675
(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .
5000- 20 UNJF-3A FSC 5306; UNS K14675
(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .
5625- 18 UNJF-3A FSC 5306; UNS K14675
(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .
6250- 18 UNJF-3A FSC 5306; UNS K14675
(R) Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1380-40 UNJF-3A
FSC 5305; UNS G87400
(R) Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1640-36 UNJF-3A
FSC 5305; UNS G87400
(R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1900-32 UNJF-3A
FSC 5306; UNS G87400
(R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .3125-24 UNJF-3A
FSC 5306; UNS G87400
(R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .375-24 UNJF-3A FSC
5306; UNS G87400
(R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .5000-20 UNJF-3A
FSC 5306; UNS G87400
(R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .6250-18 UNJF-3A
FSC 5306; UNS G87400
(R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .7500-16 UNJF-3A
FSC 5306; UNS G87400
(R) Nut, Plain, Hexagon, Cadmium Plated, UNS G87400, 125 ksi min FSC 5310; UNS G87400
(R) Nut, Plain, Hexagon - Drilled, Cadmium Plated, UNS G87400, 125 ksi min FSC 5310
Electrical Terminals Blade Type
Bolt, Machine-Hex Head-PD Shank MJ Thread, AMS 6322, Cadmium Plate, Metric Reaffirmed Noncurrent
November 2001; FSC 5306
12/26/2001 (20p)

11/19/2001 (10p)
1/16/2002 (6p)
3/7/2002 (32p)
11/9/2001 (12p)
(DRAFT) UL Standard for Safety Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker
Enclosures Proposed Tenth Edition; Comments Due by February 28,
(Draft) UL Standard for Safety Nonmetallic Cable Trays Systems Proposed First Edition; Comments Due
January 10,2002
02/14/2002 (44p)
(DRAFT)UL Standard for Safety Lightning Protection Components Proposed Fifth Edition; Comments Due
April 25, 2002
Washer, Dimpled, 100 Degree,Metric
Washer, Dimpled, 100 Degree,Metric
Washer, Dimpled, 100 Degree,Metric
Insert, Screw Thread, KeyLocked, Installation and Removal Procedure, Metric
Insert, Screw Thread KeyLocked, Alloy Steel, Miniature, Metric FSC 5340, Revision 1
Insert, Screw Thread KeyLocked, A286 Cres Miniature, Metric (Rev. 1)
Insert, Screw Thread Key Locked,Alloy Steel, Lightweight, Metric (Rev. 1)
Insert, Screw Thread KeyLocked, A286 Cres Lightweight, Metric (Rev. 1)
Insert, Screw Thread KeyLocked, Alloy Steel, Heavy Duty, Metric (Rev. 1)
Insert, Screw Thread KeyLocked, A286 Cres Heavy Duty, Metric (Rev. 1)
Bolt, Eye, Alloy Steel, 1100MPa Metric (Rev. 1)
Bolt, Eye, A286 CRES, 1100 MPaMetric (Rev. 1)
Bolt, Clevis, 660 MPa Shear,Metric (Rev. 1)
Male Threaded Fasteners,Metric Design Parameters for

Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, "T" Handle, Metric
Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, "T" Handle, Metric
Screw, Fairing Washer,Assembly, Alloy Steel, Offset Cruciform Recess Full Thread, 1100MPa Tensile,Metric
(Rev. 2)
Screw, Fairing Washer,Assembly, 6AL-4V Titanium Alloy, Offset Cruciform Recess, Full Thread,1100MPa
Tensile, Metric (Rev. 2)
Pin, Quick Release, PositiveLocking Single Acting, Metric Procurement Specification for
Setscrew, Hexagon Socket, CupPoint, A286 CRES, Metric (Rev. 1)
Bolt, Blind, Design Elements,Metric
Clevis - Engine Control Rod,Adjustable (Rev. 4)
Stud - Fine Thread (Rev. 3)
Spacer, Stepped, Swage Type(Rev. 2)
Knob-Control 1.25 Spher.,Plastic (Rev. 3) R(1992)
Post, Electrical- MechanicalEquipment, Stud Type, Metric
Post, Electrical- MechanicalEquipment, Stud Type, Metric
Post, Electrical- MechanicalEquipment, Stud Type, Metric
Post, Electrical- MechanicalEquipment, Stud Type, Metric
Post, Electrical- MechanicalEquipment, Swage Type, Metric (Rev. 1)
Post, Electrical- MechanicalEquipment, Swage Type, Metric (Rev. 1)
Post, Electrical- MechanicalEquipment, Swage Type, Metric (Rev. 1)
Post, Electrical - MechanicalEquipment, Internal Thread Type, Metric R(1987)
Post, Electrical - MechanicalEquipment, Internal Thread Type, Metric R(1987)
Post, Electrical - MechanicalEquipment, Internal Thread Type, Metric R(1987)
Post, Electrical - MechanicalEquipment, Internal Thread Type, Metric R(1987)

Fasteners - Interlocking SlideFSC 5325

Insert, Sandwich Panel, Moldedin, Blind Threaded, Self-Locking, Cres, Lightweight, Metric
Insert, Sandwich Panel, Moldedin, Thru Threaded, Self- Locking, Cres, Metric
Insert, Sandwich Panel, Moldedin, Blind Threaded, Self-Locking, Cres, Metric
Insert, Sandwich Panel, Moldedin, Blind Threaded, Self-Locking, Alum/Steel, Floating, Metric
Insert, Sandwich Panel, Moldedin, Blind Threaded, Self-Locking, Cres/Cres, Floating, Metric
Bearing, Plain, SelfLubricating, Self- Aligning Low Speed, Narrow, Grooved Outer Ring, -54Degrees C to 163
Degrees C, Metric (Rev. 1)
Bearing, Plain, SelfLubricating, Self- Aligning Low Speed, Narrow, Chamfered Outer Ring, -54Degrees C to
163 Degrees C, Metric (Rev. 1)
Bearing, Plain, SelfLubricating, Self- Aligning Low Speed, Wide, Grooved Outer Ring, -54 DegreesC to 163
Degrees C Metric
Bearing, Plain, Self Lubricating,Self- Aligning Low Speed, Wide, Chamfered Outer Ring, -54 Degrees C to
163Degrees C Metric
Bolt, Shoulder, Hexagon HeadA286 CRES 1100 MPa Tensile Metric
Bolt, Shoulder, Hexagon HeadAlloy Steel 1100 MPa Tensile Metric
Nut - Self Locking, Plate,Right Angle, 250 Degrees F FSC 5310; Revision 1
Terminal - Chain to Cable (forSwaging) (Rev. 3) R(1992)
Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)
Pin-Escutcheon FSC 5315
Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)
Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)
Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)
Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)
Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)
Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)

Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)

Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)
Nut, Plain, Castellated,Airframe FSC 5310
Cable Assembly Swaged TypeType I & Type II Terminals (Rev. 5) R(1994)
Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994)
Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994)
Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994)
Nut, Plain, Hexagon, AirframeFSC 5310
Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994)
Nut, Jam, Hexagon FSC 5310
Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994)
Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994)
Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994)
Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994)
Nut, Plain, Castellated, ShearFSC 5310
Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)
Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)
Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)
Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)
Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)
Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)
Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)

Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)

Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)
Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu ,Close Tolerance, 95 KSI FsuFSC
5305; REV 14
Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu Fsc 5305; REV 14
Rod - Control, Solid Steel(Rev. 5)
Tube Assembly-Control AluminumAlloy with Riveted Threaded Rod Ends (Rev. 5)
Tube Assembly-Control AluminumAlloy with Riveted Clevis and Threaded Rod Ends (Rev. 6)
Tube-Control Aluminum Alloy(Rev. 4)
Tube Assembly - Control Steelwith Welded Threaded Rod- Ends (Rev. 6)
Tube Assembly - Control Steelwith Welded Clevis and Threaded Rod Ends (Rev. 6)
Tube-Control Steel (Rev. 1)R(1992)
Screw-100 Degree Oval RecessedHead Sheet Metal (Rev. 1) R(1992)
Pin, Threaded Taper FSC 5315
Screw-100 Degree Oval RecessedHead Mach. (Coarse & Fine Thread) (Rev. 1) R(1992)
Screw-82 Degree Oval RecessedHead-Mach. (Coarse & Fine Thread) R(1990)
Washer-Flush Type Finishing(Rev. 5)

Nut - "U" Type SheetSpring (Rev. 2) R(1983)

Nut - "U" Type CountersunkSheet Spring (Rev. 2) R(1983)
Clamp - Ratchet, One Piece(Rev. 3)
Clamp-Ratchet, Three Piece(Rev. 3)
Latch, Push Button, Adjustable(Rev. 2)
NAS Certification &Qualification of Nondestructive Test Personnel
Hazardous Materials ManagementProgram (Rev. 2)
Coupling - Tube FlaredFitting, Female Thread (Rev. 3)
Pin - Pulley Guard Revision 9;FSC5315
Bolt, Machine, 125,000 psi -Crowned Hexagon Head, Adjusting Rev. 8
Plug Button Rev. 2
Nut Spacer, Plate - PlainRevision 8
Bolt - Hex Head, Brass,Electrical (Rev. 5)
Nut-Instrument Mount (Rev. 8)
Nut - "J" Type SheetSpring (Rev. 4) R(1992)
Fasteners, Alloy SteelExternally Threaded, 95 KSI Fsu, 450 Degrees F Rev. 13
Nut Spacer, Plate -Countersunk (Rev. 8)
Bolt - Stabilized,Non-Magnetic, CRES REV 5; FSC 5306
Screw, Machine, FillisterHead, Fine Thread FSC 5306
Nut, Drilled Jam Rev. 6
Washer-Rod End Locking (Rev.6) R(1989)
Screw, Machine, 100 Degree,Flat Head Full Threaded, Alloy Steel (Rev. 8)

Fitting, Lubrication - .1250Inch Drive, Flush Type (Rev. 7)

Screw-100 Degree CloseTolerance Flat Head 160,000 psi (Rev. 4)
Gage-100 Degrees Flat Heat Flushness(Rev. 3)
Coupling-Flexible, LowPressure, 450 Deg Air Line (Rev. 1)
Coupling-Flexible, LowPressure, 250 Deg Air Line (Rev. 1)
Coupling - Flexible, LowPressure Air Line Rev. 1
Screw - Washer Head FSC 5305;Revision 1
Rivet-Flat Head, Hi-Shear,Close Tolerance Shank Rev 5
Bushing, Sleeve - Press Fit,Undersize Inside Diameter (Rev. 5)
Bushing - Flanged Press Fit -Undersize Inside Diameter (Rev. 7)
Washer, Nonmetallic -Insulating, Electrical Rev. 4
Bolt - Universal Fitting (Rev.6)
Elbow - Universal 15 Degrees(Rev. 3)
Grommet, Plastic-SplitRevision 6; FSC 5325
Keys - Square and Rectangular(Rev. 5)
Pins-Spring, Slotted &Coiled, Heavy Duty Rev. 7
Cam Follower Needle Bearing,High Strength Stud Revision 7; FSC 3110
Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)
Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)
Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)
Setscrew - Hexagon and FlutedSocket, Headless FSC 5305
Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)

Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)

Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)
Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)
Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)
Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)
Clamp Assembly - ElectronicEquipment (Rev. 6)
Pin, Rear Mounting -Electronic Equipment (Rev. 7)
Nut, Self-Locking, Barrel,Floating, 180 kSI Ftu Revision 15; FSC5310
Retainer - Floating Barrel NutRev. 7
Coupling - Rigid TubeConnector, Aluminum (Rev. 5) R(1987)
Ring - Rigid Tube Connector,Aluminum (Rev. 5) R(1987)
Nut - Rigid Tube Connector,Aluminum (Rev. 5) R(1987)
Coupling - Rigid TubeConnector, Corrosion Resistant Steel (Rev. 5) R(1988)
Ring - Rigid Tube Connector,Corrosion Resistant Steel (Rev. 5) R(1988)
Nut - Rigid Tube Connector,Corrosion Resistant Steel (Rev. 5) R(1988)
Fittings - Rigid TubeConnector Flared Tube (Rev. 3)
Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8)
Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8)
Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8)
Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8)
Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8)
Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8)

Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8)
Pin, Straight, Headless -(Dowel) (Rev. 4)
Packing, Preformed, StraightThread Tube Fitting Boss, Synthetic Lubricant Resistant (Rev. 2)
Fastener-Recommended Shank,Hole and Head-To-Shank Fillet Radius Limits for (Rev. 6) R(1992)
Washer, Flat - Reduced OutsideDiameter (Rev. 5)
Fasteners, Titanium AlloyProcurement Specification Rev. 11
Hook, Support - ElectronicEquipment Clamp (NAS 573) (Rev. 2)
Screw, Machine, Aircraft, PanHead, Cross Recess, Short Thread, 160,000 psi Alloy Steel (Rev. 7) R(1993)
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point- SteelExternal Wrenching Rev. 7
Bolt - Twelve Point- SteelExternal Wrenching Rev 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7
Bolt - Twelve Point - SteelExternal Wrenching Rev. 7

Bolt - Twelve Point - SteelExternal Wrenching Rev. 7

Coupling-Rigid Tube BulkheadConnector (Rev. 3) R(1988)
Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306
Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306
Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306
Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306
Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306
Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306
Bearing - Rod End, ExternalThread, Self-Aligning, Anti-Friction (Rev. 2) R(1992)
Bearings, Ball and Roller, RodEnd, Anti-Friction, Airframe (Rev. 5)
Screw, Machine, Flathead 100Degree Plain and Self- Locking (Rev. 10)
Nut, Plain, Hexagon - SmallPattern, Nonstructural (Rev. 6)
Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989)
Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989)
Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989)
Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989)
Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989)
Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989)
Nut, Self-Locking, Hexagon -Low Height (Rev. 9) R(1981)
Screw, Miniature FillisterHead (Rev. 2) R(1992)
Screw, Miniature Pan Head(Rev. 2)
Screw, Miniature 100 Deg FlatHead (Rev. 2) R(1992)

Screw, Miniature Binding Head(Rev. 2) R(1992)

Cap - Protective, ElectricalConnector (Rev. 3) R(1979)
Cap - Protective, FlaredFitting (Rev. 2) R(1979)
Plug - Protective, Flared Hoseor Tube Assembly (Rev. 3)
Cap - Protective, FlaredFitting (Rev. 3)
Plug - Protective, FlaredTube, Hose Assembly or MS33649 Boss (Rev. 3)
Plug - Protective, ElectricalConnector (Rev. 2) R(1979)
Cast Surface ComparisonStandard (Rev. 2)
Cap - Protective, ElectricalConnector FSC 5340
Cap - Protective, FlaredFitting (Plastic) FSC 5340
Plug - Protective, Flared Hoseor Tube Assembly FSC 5340
Cap or Plug - Protective,Plain Tube or Hole FSC 5340
Cap - Protective FlaredFitting (Metal) FSC 5340
Plug - Protective, FlaredTube, Hose Assembly or MS33649 Boss FSC 5340
Plug - Protective, ElectricalConnector FSC 5340
Plug - Protective, FlarelessTube End (Plastic) FSC 5340
Cap - Beaded Hose Connection,Plastic, Protective FSC 5340
Plug, Pipe Thread, Protective,Dust and Moisture Seal FSC 5340
Caps, Protective, Dust andMoisture Seal for Beam Seal Fitting Protective, Dust and Moisture Seal forBeam
Seal Fittings FSC 5340
Plugs, Protective, FlarelessTube End (Metal) Protective, Dust and Moisture Seal for Beam Seal FittingsFSC
5340
Plug - Tubing, Protective,Dust and Moisture Seal FSC 5340
Cap - Tubing, Protective, Dustand Moisture Seal FSC 5340

Plug, Machine Screw,Protective, Plastic FSC 5340

Cap, Pipe, Thread, Protective,Dust and Moisture Seal FSC 5340
Caps and Plugs, Protective,Dust and Moisture Seal FSC 5340
Cap-Protective, Beaded TubeAssembly
Washer - Flat, Electrical FSC5310
Washer, Flat FSC 5310
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Bolt - Machine Hexagon Head,A286 CRES (Rev. 7)
Nut, Self-Locking, Plate - TwoLug, Regular Height, Non-Csk (Rev. 5) R(1992)
Nut, Self-Locking, Plate - TwoLug, Regular Height, Csk (Rev. 4) R(1993)
Nut, Self-Locking, Plate - OneLug, Regular Height, Non-Csk (Rev. 5) R(1992)

Nut, Self-Locking, Plate - OneLug, Regular Height, Csk (Rev. 4) R(1993)

Nut, Self-Locking, Plate -Corner, Regular Height, Non- Csk (Rev. 5) R(1992)
Nut, Self-Locking, Plate -Corner, Regular Height, Csk R(1993)
Nut, Self-Locking, Plate - TwoLug, Regular Height, Bevel Seat (Rev. 4) R(1993)
Nut, Self-Locking, Plate - OneLug, Regular Height, Non-Csk, Bevel Seat (Rev. 4) R(1993)
Nut, Self-Locking, Plate - TwoLug, Regular Height, Floating (Rev. 6) R(1992)
Nut, Self-Locking, Plate - OneLug, Regular Height, Non-Csk, Floating (Rev. 6) R(1992)
Nut, Self-Locking, Plate -Right Angle, Regular Height, C'Bore, Floating (Rev. 5) R(1993)
Nut Assembly, Self-Locking,Gang Channel - Regular Height, Non-Csk (Rev. 5) R(1992)
Nut Assembly, Self-Locking,Gang Channel - Regular Height, Non-Csk (Rev. 5) R(1992)
Nut Assembly, Self-Locking, GangChannel - Regular Height, Non-Csk (Rev. 5) R(1992)
Nut Assembly, Self-Locking,Gang Channel - Regular Height, Non-Csk (Rev. 5) R(1992)
Nut Assembly, Self-Locking,Gang Channel - Regular Height, Non-Csk (Rev. 5) R(1992)
Nut Assembly, Self-Locking,Gang Channel - Regular Height, Csk (Rev. 5) R(1992)
Nut Assembly, Self-Locking,Gang Channel - Regular Height, Csk (Rev. 5) R(1992)
Nut Assembly, Self-Locking,Gang Channel - Regular Height, Csk (Rev. 5) R(1992)
Shackle-Anchor, Forged CarbonSteel, Round Pin (for Ground Support Equipment) (Rev. 2) R(1994)
Shackle-Chain, Forged CarbonSteel, Screw Pin (for Ground Support Equipment) (Rev. 1) R(1994)
Shackle-Chain, Forged CarbonSteel, Round Pin (for Ground Support Equipment) (Rev. 2) R(1994)
Thimble, Heavy, Wrought Steel,Wire Cable (for Ground Support Equipment) (Rev. 3)
Clip-Wire Rope, Forged CarbonSteel (for Ground Support Equipment) R(1994)
Turnbuckle Assembly, ForgedCarbon Steel, Jaw and Jaw (for Ground Support Equip) Rev. 4

Sling Link, Welded, AlloySteel, Pear Shaped (for Ground Support Equipment) (Rev. 2)
Grab Hook, Forged Alloy Steel,Direct Eye (for Ground Support Equipment) (Rev. 2)
Safety Hook, Forged CarbonSteel, Snap, Direct Eye (for Ground Support Equipment) (Rev. 2)
S Hook, Alloy Steel (forGround Support Equipment) (Rev. 2)
Bolt, Eye, Assembly - ForgedCarbon Steel (Rev. 4)
Rivet, Protruding Head,Hi-Shear (Supersedes NAS 178) (Rev. 4) R(1994)
Rivet, Hi-Shear 100 DegreeFlush Close Tolerance Head (Supersedes NAS 177) (Rev. 4)
Spacer, Sleeve-Rivet, HighTemperature, Non Magnetic Rev.6
Spacer, Sleeve-Screw and BoltHigh Temperature, Non Magnetic Rev. 8
Washer, Plain, Oversize forAluminum Terminals (Rev. 3) R(1981)
Collar, Swage Locking forPull-Type and Stump-Type Lockbolts Rev. 12
Setscrew - Self-Locking Rev.12
Hook, Chain, S (Rev. 3)
Streamer Assembly, Warning(Rev. 5)
Rivet, Solid, 100 Deg. FlushShear Head, Aluminum Alloy, Titanium Columbium Alloy (Rev. 9)
Washer-Bevel 9 1/2 Degrees(Rev. 2)
Screw, Machine-Flat FillisterHead, Full Thread, Offset Cruciform Rev. 10
Screw, Machine-Flat 100 DegHead Full Thread, Offset Cruciform Rev. 9
Standoff, Threaded,Self-Clinching REV 1; FSC 5340
Insert, Screw Thread HelicalCoil, Free Running and Self-Locking, Tangless Revision 2
Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)
Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)

Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)
Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)
Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)
Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)
Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)
Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)
Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9
Washer, Flat (Rev. 2)
Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14

Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14
Bolt, Shoulder, Hex Head,Close Tolerance, CRES-A286 Rev.3; FSC 5306
Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10)
Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10)
Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10)
Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10)
Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10)
Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10)
Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10)
Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10)
Washer, Dimpled, 100 Degrees(Rev. 5)
Fastener, Chain (Rev. 1)R(1981)
Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10
Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10
Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10
Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10
Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10
Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10
Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10
Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10
Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9
Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9

Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9

Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9
Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9
Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9
Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9
Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9
Screw, Self-Locking-Flat 100Deg Head, Full Thread (Rev. 12)
Screw, Self-Locking, Pan Head,Full Thread Cruciform and Offset Cruciform Recess Rev. 16
Screw, Self-Locking-FlatFillister Head, Full Thread (Rev. 10)
Locking Device Positive Index(Rev. 8)
Shim - Miniature Anchor Nut(Rev. 3)
Washer - 5052 Aluminum Alloy(Rev. 2) R(1989)
Rivet-Solid Universal Head,A286 Corrosion Resistant Steel (Rev. 5)
Rivet - Solid - 100 DegreeFlush Head A286 Corrosion Resistant Steel (Rev. 4)
Rivet, Solid, 100 Deg FlushShear Head, A286 Corrosion Resistant Steel and Monel (Rev. 9)
Chain - Bead Components andAssembly (Rev. 5)
Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)
Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)
Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)
Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)
Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)
Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)

Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)
Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)
Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)
Fitting, Tie Down Strap End(Rev. 2) R(1989)
Strap Assembly - Tie Down(Rev. 2)
Strap Assembly - Tie DownBuckle (Rev. 2)
Screw, Pan Head SlottedDovetail Recess, Full Thread Self-Locking Optional Rev. 10
Bolt, Pan Head Self-LockingOptional Rev. 12
Screw, 100 Degree Flush HeadDovetail Slot Recess, Full Thread Self-Locking Optional REV 9; FSC 5305
Bolt, 100 Degree Flush HeadSelf-Locking Optional Rev. 11
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)
Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)

Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)

Rivet - Solid, 100 DegreeFlush Head, Aluminum Alloy, MS 20426 Repair (Rev. 1) R(1981)
Rivet - Solid, Universal Head,Aluminum Alloy, MS 20470 Repair (Rev. 1) R(1981)
Bolt, Ring - Swivel (Rev. 4)R(1980)
Washer - 7075 Aluminum AlloyFlat (Rev. 3)
Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306
Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306
Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306
Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306
Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306
Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306
Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306
Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306
Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306
Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306
Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306
Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306
Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306
Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306
Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306
Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306
Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306

Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306

Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306
Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306
Snap Hook (Rev. 5)
Hook Snap, Bolt (Rev. 2)R(1980)
Buckle - Web Strap, Light Duty(Rev. 3) R(1980)
Safety Hook (Rev. 2) R(1982)
Nut, Extended Washer, Hexagon- Self-Locking, Low Height, C'Bore (Rev. 5) R(1985)
Nut, Hex and WasherSelf-Aligning, Self-Locking - Shear Pin (Rev. 3) R(1980)
Nut, Self-Locking, Hexagon-LowHeight, Light Weight (Rev. 12)
Pin - Threaded Shear 100Degree Csk Head Rev. 3 R(1982)
Pin - Threaded Shear 100Degree Csk Head (Rev. 3) R(1982)
Pin - Threaded Shear 100Degree Csk Head (Rev. 3) R(1982)
Pin - Threaded Shear 100Degree Csk Head (Rev. 3) R(1982)
Pin - Threaded Shear 100Degree Csk Head (Rev. 3) R(1982)
Bolt, Shoulder - Hexagon HeadREV.4; FSC 5306
Screw - Brazier Head, Shoulder(Rev. 2)
Screw - 100 Degree Flat Head,Shoulder (Rev. 2)
Thumbscrew (Rev. 1) R(1991)
Screw, Pan Head, AssembledWashers (Rev. 3)
Fastener Test Methods Metric;Method 105, Stress Durability FSC 53GP

Fastener Test Methods, Metric;Method 107 Vibration FSC 53GP

Fastener Test Methods, Metric;Method 108 Tensile Strength FSC 53GP

Fastener Test Methods, Metric;Method 109 Stress Corrosion FSC 53GP

Fastener Test Methods, Metric;Method 111 Tension Fatigue FSC 53GP

Fastener Test Methods, Metric;Method 113 Double Shear Test FSC 53GP

Fastener Test Methods FSC 53GP

Fastener Test Methods; Method1 Salt Spray FSC 53GP
Fastener Test Methods; Method2 Interaction FSC 53GP
Fastener Test Methods; Method3 Humidity FSC 53GP
Fastener Test Methods; Method4 Lap Joint Shear FSC 53GP
Fastener Test Methods; Method5 Stress Durability FSC 53GP
Fastener Test Methods; Method6 Hardness FSC 53GP
Fasteners Test Methods; Method7 Vibration 53GP
Fastener Test Methods; Method8 Tensile Strength Rev 1; FSC 53GP
Fastener Test Methods; Method9 Stress Corrosion
Fastener Test Methods; Method10 Stress Rupture

Fastener Test Methods; Method11 Tension Fatigue FSC 53GP

Fastener Test Methods; Method12 Thickness of Metallic Coatings FSC 53GP

Fastener Test Methods; Method13 Double Shear Test FSC 53GP

Fastener Test Methods; Method14 Stress Durability Internally Threaded Fasteners 53GP

Fastener Test Methods; Method15 Torque - Tension 53GP

Fastener Test Methods; Method16 Clamping Force for Installation Formed Fasteners FSC 53GP

Fastener Test Methods; Method17 Stress Relaxation FSC 53GP

Fastener Test Methods; Method18 Elevated Temperature Tensile Strength FSC 53GP

Fastener Test Methods; Method19 Fastener Sealing FSC 53GP

Fastener Test Methods; Method20 Single Shear FSC 53GP

Fastener Test Methods; Method21 Shear Joint Fatigue Constant Amplitude FSC 53GP

Fastener Test Methods; Method22 Receptacle Push-Out, Panel Fasteners FSC 53GP

Fastener Test Methods; Method23 Tensile Strength of Panel Fasteners FSC 53GP

Fastener Test Methods; Method24 Receptacle Torque- Out, Panel Fasteners FSC 53GP

Fastener Test Methods; Method25 Driving Recess Torque Quality Conformance Test FSC 53GP

Fastener Test Methods; Method26 Structural Panel Fastener Lap Joint Shear FSC 53GP

Fastener Test Methods; Method27, Panel Fastener Sheet Pull-Up FSC 53GP

Fastener Test Methods; Method28, Elevated Temperature Double Shear FSC 53GP

Fastener Test Methods; Method29 Measurement Techniques for Determining Shank Expanding Characteristics
ofDeformable Fasteners FSC 53GP
Fastener Test Methods; Method30, Sheet Pull-Up of Blind Fasteners 53GP

Fastener Test Methods; Method31, Torque FSC 53GP

Rivet, Slug, Sleeveless (Rev.2) R(1991)

Pin - Threaded ShearProtruding Head (Rev. 3) R(1991)
Pin - Threaded ShearProtruding Head (Rev. 3) R(1991)
Pin - Threaded ShearProtruding Head (Rev. 3) R(1991)
Pin - Threaded ShearProtruding Head (Rev. 3) R(1991)
Pin - Threaded ShearProtruding Head (Rev. 3) R(1991)
Insert, Screw - ThreadedSpline (Rev. 2)
Nut, Blind Rivet - Flathead,Internal Thread, Non- Locking (Free-Running) and Self-Locking
(PrevailingTorque) Rev. 10; FSC 5310
Nut, Blind Rivet - CountersunkHead, Internal THD, Non- Locking (Free Running) or Self-Locking
(PrevailingTorque) Rev. 10; FSC 5310
Pin, Quick Release, PositiveLocking Single & Double Acting (Rev. 6)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)

Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)

Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)
Identification of MaleThreaded Fasteners Rev 5
Caster, Light Duty, Rigid andSwivel Rev. 2 R(1981)
Screw, Cap, Socket HeadUndrilled and Drilled, Plain and Self-Locking Alloy Steel,Corrosion-Resistant Steel
and Heat-Resistant Steel, UNRF-3A Rev. 9
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Screw, Cap, Socket HeadUndrilled and Drilled, Plain and Self-Locking Alloy Steel, Corrosion-Resistant Steel
and Heat-Resistant Steel, UNRC-3A and UNRC-2A (Rev. 9)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)

Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)

Pin, Quick Release, Positive Locking,Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)
Grommet-Plastic Flip Type(Rev. 6)
Duct, Air, Flexible andSemi-Rigid (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Duct-Air, Flexible, Helix WireSupported (Rev. 2)
Fitting, Tie Down Strap End(Light Duty) (Rev. 2)
Strap Assembly, Two PartAdjustable (Rev. 5)
Strap Assembly, One Part (Rev.5)
Strap Assembly, Loop Type(Rev. 6)

Insert-Threaded Metal,Lightweight, Self-Locking, and Non Self-Locking (Rev. 6)

Insert - Threaded Metal,Heavy-Duty, Self-Locking, and Non Self-Locking Rev. 7
Chain-Welded Twist Link, ShortLink Pattern R(1980)
Clamp-Loop, Nylon Rev. 5
Rivet-Blind, Protruding Head,Locked Spindle (Rev. 6)
Rivet-Blind, 100 Degree FlushHead, Locked Spindle FSC 5320; Revision 7
Rivet - Blind, Self-PluggingMechanically Locked Spindle (Rev. 5)
Washer, Radius (Rev. 1)
Nut, Universal Port Fitting(Rev. 4)
Gasket, Sealing, Custom Design(Rev. 2) R(1993)
Pins and Collars, SwageLocking Revision 7; FSC 5320
Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4)
Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4)
Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4)
Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4)
Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4)
Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4)
Nut, Plain, Hexagon, DrilledJam, Thin (Rev. 2)
Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993)

Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993)

Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993)
Terminal - Strap, Cable EyeEnd and Fork End Rev. 2
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) R(1988)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) R(1988)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) R(1988)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) R(1988)
Lockwasher - Bearing Retaining(Rev. 5)
Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2) R(1988)
Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2) R(1988)
Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2) R(1988)
Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2) R(1988)
Eyelet, Metallic, Electrical,Printed Circuit Board, Funnel Type R(1989)
Chain, Weldless Flat Type LinkR(1980)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev.
2)R(1989)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev.
2)R(1989)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev.
2)R(1989)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev.
2)R(1989)
Clip, Spring Tension REV 2;FSC 5340
Clip, Spring Tension (Rev. 5)
Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981)
Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981)

Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981)
Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981)
Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981)
Nut, Self-Locking, Plate - TwoLug, Cap, Floating (Rev. 9)
Nut, Self-Locking, Plate - TwoLug, Cap, Floating, Reduced Rivet Spacing (Rev. 9)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev.
2)R(1981)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev.
2)R(1981)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev.
2)R(1981)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev.
2)R(1981)
Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev.
2)R(1981)
Pin, Swage Locking, Steel, 100Degree Head (MS24694), Tension, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel, 100Degree Head (MS24694), Tension, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel, 100Degree Head (MS24694), Tension, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel, 100Degree Head (MS24694), Tension, Stump-Type (Rev. 4) R(1993)
Locknut Bearing Retaining(Rev. 6)
Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993)
Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993)
Nut Assembly, Self-Locking,Gang Channel - Low Height, C'Bore, Miniature Rev. 3 R(1979)
Nut Assembly, Self-Locking,Gang Channel - Low Height, C'Bore, Miniature (Rev. 3) R(1979)

Radiographic Standard forClassification of Fusion Weld Discontinuities (Rev. 1) R(1981)

Washers-Plastic and SyntheticRubber (Rev. 3) R(1989)
Fastener Systems for AerospaceApplications FSC53GP
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Pull-Type Rev. 2 R(1981)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2) R(1981)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2) R(1981)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2) R(1981)
Packing with Retainer (Rev. 3)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type Rev. 2 R(1989)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Stump-Type Rev. 2 R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 2) R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 2) R(1989)

Knob, Hand, Ground SupportEquipment (Rev. 4) R(1981)

Grommet, PTFE-Split Revision3; FSC 5325
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4)
Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4)
Gages, Pins and CollarInspection, Swage Locking Rev. 9
Reducer, Flared Tube (Rev. 2)
Bolt, Flat Pan Head Rev. 13
Bolt, 100 Degree Flush Head,95 KSI Shear FSC 5306; Revision 11
Bolt, 100 Degree Flush ReducedHead (Rev. 9)
Washer Plain and Csk, 1200Degrees F (Rev. 3)
(Inactive) Washer - SealingRev. 3
Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)

Packing, Ethylene PropylenePreformed O-Ring Phosphate Ester Resistant (-65 Degrees F to 250/300
DegreesF) Rev. 6
Packing, Ethylene PropylenePreformed, Straight Thread Tube Fitting Boss, Phosphate Ester Resistant
-65Degrees F to 250/300 Degrees F (Rev. 4)
Seal Element, Packing,Preformed, Ethylene Propylene Rubber Revision 4; FSC5330
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11)
Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8
Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8
Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8
Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8
Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8
Screw, Machine-Pan Head, CrossRecessed, Full Thread (Rev. 2) R(1988)
Washer, Key, Dual Tab (Rev. 1)R(1988)
Handle, Latching Internal& External Release Components & Assembly (Rev. 1) R(1980)
Washer, Lock, Spring,Non-Magnetic (Rev. 2) R(1981)
Fastener - Blind, InternallyThreaded, External Sleeve, General Purpose, Protruding Head Self-Locking(Rev. 5)

Fastener - Blind, InternallyThreaded, External Sleeve, General Purpose, Flush Head Self-Locking (Rev. 5)
Fastener - Blind, InternallyThreaded, External Sleeve, High Temperature, Protruding Head Self-Locking(Rev.
8)
Fastener - Blind, InternallyThreaded, External Sleeve, High Temperature, Flush Head Self-Locking (Rev. 6)
Fastener - Blind, InternallyThreaded, External Sleeve, Lightweight, Protruding Head Self-Locking (Rev. 6)
Fastener - Blind, InternallyThreaded, External Sleeve, Lightweight, Flush Head, Millable &Non-Millable, SelfLocking (Rev. 5)
Fastener - Blind InternallyThreaded, External Sleeve Self-Locking Rev. 4
Washer, Lock-Spring, Helical,Hi-Collar (Rev. 1) R(1979)
Strap, Retaining-Cushioned,Rectangular, Two-Piece Revision 5; FSC 5340
Rivet, Blind, Aluminum Sleeve,Mechanically Locked Spindle, Bulbed Rev 3; FSC 5320
Rivet, Blind, Monel andInconel Sleeve, Mechanically Locked Spindle, Bulbed REV 2
Hose Assembly,Tetrafluoroethylene High Temperature, Medium Pressure, Flared R(1981)
Hose Assembly,Polytetrafluoroethylene High Temperature, High Pressure, Flared R(1982)
Hose Assembly,Polytetrafluoroethylene High Temperature, High Pressure, Flareless R(1982)
Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
Strap, Retaining-Cushioned,Rectangular, Open Bottom Revision 4; FSC 5340

Clamp, Loop-Cushioned,Rectangular Revision 5; FSC 5340

Clamp, Loop-Cushioned, CenterMounting Revision 4; FSC 5340
Clamp, Loop-Cushioned,Elongated Revision 3; FSC 5340
Clamp, Loop-Cushioned Revision4; FSC 5340
Clamp, Loop-Cushioned, SaddleRevision 3; FSC 5340
Rivet, Blind, 100 DegreeReduced Flush Head, (NAS 1097 Head) Mechanically Locked Spindle (Rev. 2)
Rivet, Blind, Protruding Head,Mechanically Locked Spindle (Rev. 2)
Rivet - Blind, 100 DegreeFlush Head (MS20426 Head) Mechanically Locked Spindle (Rev. 2)
Rivet, Blind, Self-Plugging,Mechanically Locked Spindle (Rev. 2)
Pin-Rivet, Threaded, TaperShank, Shear Type 100 Degree Head (Rev. 1)
Pin-Rivet, Threaded, TaperShank, Shear Type, 100 Degree Head - Oversize (Rev. 1)
Nut, Self-Locking, CaptiveWasher, Shear Type, 450 Degrees F and 800 Degrees F (Rev. 3)
Nut, Self-Locking, Aligning,450 Degrees F and 800 Degrees F (Rev. 4)
Pin-Rivet, Threaded, TaperShank, Shear Type, Protruding Head (Rev. 1)
Pin-Rivet, Threaded, TaperShank, Shear Type, Protruding Head - Oversize (Rev. 1)
Fastener - Taper Shank (Rev.1)
Nut, Blind, Serrated Head,Self-Locking, 450 Degrees F (Rev. 1) R(1981)
Nut, Blind, Serrated Head,Self-Locking, Closed End, 450 Degrees F (Rev. 1) R(1981)
Nut, Self-Locking, BlindRivet, Elliptical Head, 450 Degrees F (Rev. 4)
Nut, Self-Locking, BlindRivet, Elliptical Head, Closed End, 450 Degrees F (Rev. 2)
Nut Self-Locking, Blind Rivet,Elliptical Head Installation Data for (Rev. 1)
Rivet - Blind, ProtrudingHead, Mechanically Locked Spindle, Bulbed (Rev. 3)

Rivet - Blind, 100 DegreeFlush Head, Mechanically Locked Spindle, Bulbed (Rev. 3)
Fastener - Blind, InternallyThreaded, External Sleeve, General Purpose, Flush Head, Self-Locking1/64"
Oversize (Rev. 3)
Fastener - Blind, InternallyThreaded, External Sleeve, General Purpose, Protruding Head Self-Locking1/64"
Oversize (Rev. 3)
Fastener - Blind, InternallyThreaded, External Sleeve, High Temperature, Flush Head Self-Locking1/64"
Oversize (Rev. 4)
Fastener - Blind, InternallyThreaded, External Sleeve, High Temperature, Protruding Head Self-Locking1/64"
Oversize (Rev. 4)
Fastener - Blind, InternallyThreaded, External Sleeve Lightweight, Flush Head, Millable &Non-Millable, SelfLocking, 1/64" Oversize (Rev. 3)
Fastener - Blind, InternallyThreaded, External Sleeve, Lightweight, Protruding Head Self-Locking1/64"
Oversize (Rev. 3)
Nut, Self-Locking, 450 DegreesF, Hexagon-Low Height 80 ksi (Rev. 1)
Nut, Self Locking, ExtendedWasher, Double Hexagon, 220 ksi, 450 Degrees F (Rev. 1)
Nut, Self-Locking, DoubleHexagon Shear 450 Deg F (Rev. 1)
Fitting End, Flareless Acorn,Standard Dimensions for Revision 4; FSC 4730
Elbow, Reducer, 45 Degree,Flareless Tube to Swivel (Rev. 2)
Elbow Reducer, 90 Degree,Flareless Tube to Swivel (Rev. 2)
Tee, Reducer, Flareless Tubeto Swivel Swivel on Run (Rev. 2)
Tee, Reducer, Flareless Tubeto Swivel Swivel on Side (Rev. 2)
Nut, Self-Locking, Plate - TwoLug, Floating, 125 ksi Ftu, 450 Degrees F and 800 Degrees F (Rev. 1)
Nut, Self-Locking, Plate -Corner, Counterbored, Floating, 125 ksi Ftu, 450 Degrees F and 800 Degrees F(Rev.
1)
Bolt, Close Tolerance 100Degree Reduced Head Dovetail Slot (Rev. 2)
Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed (Rev. 6)
Rivet - Blind, 100 DEG FlushHead, Mechanically Locked Spindle, Bulbed Rev. 7
Nut, Self-Locking, Plate, TwoLug, Low Height, C'Bored, 160 ksi, 450 Degrees F, 800 Degrees F (Rev. 1)
R(1994)
Nut, Self-Locking, Plate, OneLug, Low Height, C'Bored, 160 ksi, 450 Degrees F, 800 Degrees F (Rev.
1)R(1982)

Nut, Self-Locking, Plate,Corner, Low Height, C'Bored, 160 ksi, 450 Degrees F, 800 Degrees F (Rev. 1)
R(1982)
Nut, Self-Locking, Plate, TwoLug, Low Height, C'Bored, Floating, 160 ksi, 450 Degrees F, 800 Degrees F(Rev.
1) R(1982)
Nut, Self-Locking, Plate, OneLug, Low Height, C'Bored, Floating, 160 ksi, 450 Degrees F, 800 Degrees F(Rev.
1) R(1982)
Nut, Self-Locking, Plate, TwoLug, Low Height, C'Bored, Reduced Rivet Spacing, 160 ksi, 450 Degrees F,
800Degrees F (Rev. 1) R(1989)
Nut, Self-Locking, Plate, OneLug, Low Height, C'Bored, Reduced Rivet Spacing, 160 ksi, 450 Degrees F,
800Degrees F (Rev. 1) R(1989)
Nut, Self-Locking, Plate,Corner, Low Height, C'Bored, Reduced Rivet Spacing, 160 ksi, 450 Degrees F,800
Degrees F (Rev. 1) R(1989)
Nut, Self-Locking, Plate, OneLug, Low Height, C'Bored, Side by Side, 160 ksi, 450 Degrees F, 800 Degrees
F(Rev. 1) R(1989)
Nut, Self-Locking, Plate, TwoLug, Low Height, C'Bored, Floating, Reduced Rivet Spacing, 160 ksi,
450Degrees F, 800 Degrees F (Rev. 1) R(1989)
Nut, Self-Locking, Plate, TwoLug, Low Height, 100 Degree Csk, 160 ksi, 450 Degrees F, 800 Degrees F
(Rev.1) R(1989)
Nut, Self-Locking, Plate, OneLug, Low Height, 100 Degree Csk, 160 ksi, 450 Degrees F, 800 Degrees F
(Rev.1) R(1989)
Nut, Self-Locking, Plate,Corner, Low Height, 100 Degree Csk, 160 ksi, 450 Degrees F, 800 Degrees F(Rev. 1)
R(1989)
Nut Assembly, Self-Locking,Gang Channel, Low Height, C'Bored, 160 ksi, 250 Degrees F, 450 Degrees F,
800Degrees F (Rev. 1) R(1989)
Nut Assembly, Self-Locking,Gang Channel, Low Height, Csk, 160 ksi, 250 Degrees F, 450 Degrees F,
800Degrees F (Rev. 1) R(1989)
Bolt, External Wrenching, 220ksi Min Tensile, 132 ksi Min Shear H-11 Steel, 900 Degrees F (Rev. 2) R(1991)
Clamp, Tube Mounting R(1994)
Nut, Self-Locking, Plate, Sideby Side, Floating, Low Height, Reduced Rivet Spacing, C'Bored, 160 ksi,
450Degrees F, 800 Degrees F Rev. 1; FSC 5310
Bolt, 100 Degree Flush Head160,000 PSI UTS Rev. 4
Nut, Self-Locking, Plate - TwoLug, Floating, Variable Counterbore, Replaceable Nut Element 125 ksi Ftu,
450Degrees F and 800 Degrees F R(1990)
Nut, Self-Locking, Plate - OneLug, Floating, Variable Counterbore, Replaceable Nut Element 125 ksi Ftu,
450Degrees F and 800 Degrees F R(1990)
Nut, Self-Locking, Plate -Corner, Floating, Variable Counterbore, Replaceable Nut Element 125 ksi Ftu,450
Degrees F and 800 Degrees F R(1990)
Nut - Self-Locking,Counterbore Replaceable Element R(1990)
Retaining Clip - ReplaceableNut Plate R(1990)

Screw, Hex Head, CruciformRecess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev. 2)
Screw, Hex Head, CruciformRecess, Full Thread A286 CRES, 160,000 PSI Tensile FSC 5305: Rev. 6
Nut, Plate, Self-LockingFloating, Spring Loaded R(1990)
Nut, Self-Locking, ExtendedWasher, Double Hexagon, Alloy Steel, 180 ksi, 450 Degrees F (Rev. 1) R(1989)
Nut, Self-Locking, ExtendedWasher, Double Hexagon, CRES, 180 KSI, 450 Degrees F and 800 Degrees
FRevision 3; FSC5310
Post, Electrical-MechanicalEquipment, Stud Type (Rev. 3)
Post, Electrical-MechanicalEquipment, Swage Type (Rev. 1)
Post, Electrical-MechanicalEquipment (Rev. 2)
Insert, Molded in, BlindThreaded, Self-Locking, Nonself-Locking, Sandwich Panel Revisiion 8; FSC 5325
Insert, Molded in, Threaded,Self-Locking, Nonself- Locking, Sandwich Panel Revision 7; FSC5325
Insert, Molded in, Csk andThru Clearance Hole, Sandwich Panel Revision 5; FSC5325
Insert, Molded in, BlindThreaded, Self-Locking, Nonself-Locking, Floating, Sandwich Panel Revision
7;FSC5325
Insert, Molded in, BlindThreaded, Self-Locking, Nonself-Locking, Lightweight, Sandwich Panel Revision8;
FSC5325
Installation Tab and AlignmentTool for NAS1832, NAS1833, NAS1834, NAS1835, and NAS1836 Molded in
InsertsFSC 5120; Rev. 4
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)

Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)

Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalSingle Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalSingle Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalSingle Step (Rev. 1) R(1989)
Stud Assembly - Threaded MetalSingle Step (Rev. 1) R(1989)
Nut, Self-Locking, Plate - TwoLug, Deep Counterbore, Floating, 125 ksi Ftu, 450 Degrees & 800 Degrees
F(Rev. 2)
Nut Assembly, Torque Limiting,600 Degrees F Application .2500-28 UNJF-3B Thread (Rev. 2)
Nut, Torque Limiting, 900Degrees F Application, 1/4- 28 UNJF-3B Thread R(1989)
Insert, Self-Locking, ThermalBonded Honeycomb Panel (Rev. 1) R(1994)
Rivet, Blind - GeneralPurpose, Bulbed, Self-Plugging, Mechanically-Locked-Spindle Rev. 4
Rivet, Blind - GeneralPurpose, Bulbed, Protruding Head, Mechanically-Locked-Spindle Rev. 7
Rivet, Blind-General Purpose,Bulbed, 100 Degree Flush Head, Mechanically-Locked-Spindle Rev. 8
Clamp, Hose, Band, TangentialWorm, Light Weight (Rev. 3)
Clamp, Hose, Band, TangentialWorm, Light Weight (Rev. 1) R(1994)
Clamp, Hose FSC 4730; Rev 1
Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)
Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)

Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)
Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)
Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)
Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)
Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)
Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)
Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7
Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)
Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)
Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)
Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)
Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)
Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)

Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)
Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)
Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)
Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 4 R(1989)
Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4) R(1989)
Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4) R(1989)
Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4) R(1989)
Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4) R(1989)
Collar, Grooved, Pin-Rivet,Titanium, (Composite Applications)
Pin-Rivet, Grooved; and Collarfor Composite Materials
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type

Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type

Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type
Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type
Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy Rev. 4 R(1989)
Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy (Rev. 4) R(1989)
Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy (Rev. 4) R(1989)
Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy (Rev. 4) R(1989)

Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy (Rev. 4) R(1989)
Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994)
Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Tension, 100 DegreeHead (MS24694), Stump- Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Tension, 100 DegreeHead (MS24694), Stump- Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Tension, 100 DegreeHead (MS24694), Stump- Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Tension, 100 DegreeHead (MS24694), Stump- Type, Titanium Alloy (Rev. 3) R(1994)
Bolt-Lock, Shear, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 3 R(1989)
Bolt-Lock, Shear, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989)

Bolt-Lock, Shear, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989)
Bolt-Lock, Shear, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989)
Bolt-Lock, Shear, 100 DegreeHead, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 3 R(1989)
Bolt-Lock, Shear, 100 DegreeHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989)
Bolt-Lock, Shear, 100 DegreeHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989)
Bolt-Lock, Shear, 100 DegreeHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989)
Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7)
Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)
Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)
Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)
Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)
Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)
Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)

Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)
Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306
Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)
Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)
Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)
Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)
Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)
Bolt, 100 Deg Flat Head, OffsetCruciform and Slotted Dovetail, 180 ksi (Rev. 3)
Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)

Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)
Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
Grommets, Rubber, Hot-Oil andCoolant Resistant FSC 5325
Bolt-U (Rev. 2)

Bolt-U (Rev. 2)
Bolt-U (Rev. 2)
Bolt-U (Rev. 2)
Bolt-U (Rev. 2)
Bolt-U (Rev. 2)
Bolt-Hook (Rev. 2)
Bolt-Hook (Rev. 2)
Bolt-Hook (Rev. 2)
Bolt-Hook (Rev. 2)
Bolt-Hook (Rev. 2)
Bolt-Hook (Rev. 2)
Screws, Machine, Pan Head,Cross-Recessed, Self- Sealing, Integral Silicone 0-Ring, Plain and Self-Locking
FSC 5305
Screws, Machine, Pan Head,Cross-Recessed, Self- Sealing, Integral Fluorosilicone 0-Ring, Plain andSelfLocking FSC 5305
Nuts, Plain, Clinch-Flush FSC5310
Bolt-U, Strap Type (Rev. 2)
Bolt-U, Strap Type (Rev. 2)
Bolt-U, Strap Type (Rev. 2)
Bolts, Self-Retaining,Positive Locking, Cres 90 KSI Fsu, 63 KSI Ftu, Hexagon Slotted Head, 450Degrees F
and 650 Degrees F FSC 5306
Packaging of ElectricalCable-Cord-Wire Rev. 2
Electrical Harness - CableAssemblies, Packaging of Rev. 1
Screw Assembly, Panel FSC 5325
Aluminum Coating (Rev. 3)

Heat Sink,Electrical-Electronic Component, Semiconductor Devices, Formed FSC 5999

Heat Sink,Electrical-Electronic Component, Semiconductor Devices, for Dual Inline Packages(DIP)
Pin, Crimp - Protruding ShearHead (Rev. 2)
Pin, Crimp - 100 Degree FlushShear Head (Rev. 2)
Pin, Crimp, Protruding TensionHead (Rev. 1)
Pin, Crimp, 100 Degree CrownShear/Tension Head (Rev. 1)
Fasteners; Panel;Nonstructural FSC 5325
Pin, Straight, Headed FSC 5315
Rivets, Structural, AluminumAlloy, Titanium Columbium Alloy General Specification for FSC 5320
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking. 160 Ksi Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, rediced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt,Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306
Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking,160 KSI Ftu Revision 8; FSC5306

Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt, Tension Hex Head, CloseTolerance, A286 CRES, Short Thread,Reduced Major Thread Dia; Self-Locking
andNonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread,Reduced Major Thread Dia; Self-Locking
andNonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia, SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt, Tension Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160KSI Ftu Revision 7; FSC5305
Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread,Reduced Major Thread Dia; Self-Locking
andNonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread DIA, SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305
Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7, FSC5305
Bolt,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC5
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, Close Tolerance,Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC5
Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC
Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC

Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread,Reduced Major Thread
Diameter,Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC
Bolt,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC5
Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC
Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC
Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC
Bolt ,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking,160 KSI Ftu Revision 9, FSC5
Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC
Bolt,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC5
Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major
ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8

Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Fasteners, Externally ThreadedAlloy Steel, Corrosion Resistant Steel, Aluminum 60,000 PSI to 125,000
PSIRev.1; FSC 53GP
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Clamps, Instrument Mounting,Aircraft FSC 5340

Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7
Pin, Swage Locking, pH13-8MoCRES, 100 Degree Crown Head, Shear, Pull-Type (Rev. 1)
Pin, Swage Locking, pH13-8MoCRES, Protruding Head, Shear, Pull-Type (Rev. 1)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Stump-Type R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Stump-Type R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Stump-Type R(1989)
Pin, Swage Locking, Aluminum Alloy,100 Degree Head (MS20426), Tension, Stump-Type R(1989)
Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Stump-Type R(1989)
Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2)
Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989)
Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989)
Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989)
Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989)
Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989)
Pin, Swage Locking, A-286CRES, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 1)

Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1)
Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2)

Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2)
Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2)
Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990)

Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990)
Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990)
Recess, Ribbed Cruciform,Dimensions of Recess and Gages FSC 53GP; REV 8
Bit, Screwdriver, CruciformSpecification for (Rev. 2)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head, CruciformRecess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking
andNonlocking FSC 5306; Revision 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)

Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking
andNonlocking (Rev. 5)
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head, CruciformRecess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3

Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking
andNonlocking Rev. 3
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and
NonlockingRev. 4
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5

Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking
Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking
Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking
Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking
Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking
Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking
Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking
Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking
FSC 5306; Revision 6
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking
FSC 5306; Revision 6

Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking
FSC 5306; Revision 6
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking
FSC 5306; Revision 6
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking
FSC 5306; Revision 6
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking
FSC 5306; Revision 6
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking
FSC 5306; Revision 6
Bolt, Internal Wrenching, 160KSI FTU Revision 1; FSC 5306
Screws, Structural, AircraftFSC 5305
Nut, Self-Locking, 1,200Degrees Fahrenheit FSC 5310
Bolt, Machine, 1200 DegreesFahrenheit FSC 5306
Bolt, Pan Head, Close Tolerance,Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V, Self-Locking
andNonlocking Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and
Nonlocking Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and
Nonlocking Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and
Nonlocking Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and
Nonlocking Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V, Self-Lockingand
Nonlocking Rev. 4
Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and
Nonlocking Rev. 4
Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3)
Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3)
Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3)
Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3)
Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3)
Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3)

Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3)
Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5
Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5
Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5
Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5
Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5
Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5
Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5
Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev.
2)
Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev.
2)
Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev.
2)
Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev.
2)
Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev.
2)
Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev.
2)
Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev.
2)
Screw, Machine, Washer Head,Full Thread, Phillips Recess, Alloy Steel (Rev. 2)
Screw, Machine, Washer Head,Full Thread, Phillips Recess, Alloy Steel (Rev. 2)
Screw, Machine, Washer Head,Full Thread, Phillips Recess, Alloy Steel (Rev. 2)
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread

Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Rivets, Blind, NonstructuralType FSC 5320; Rev. 1
Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
Bolt, 180 KSI Ftu and 180 KSIFsu, 450 Degrees F Protruding and Flush Head; General Specification for
FSC5306

Inserts, Screw-Thread, HelicalCoil FSC 5325

Bolt, Alloy Steel, Shear andTensile (132 KSI Min Fsu and 220 KSI Min Fts), 450 Degrees F, Spline
Drive,General Specification for FSC 5306
Bolts, Shear, Steel, 132 KSIFsu, 450 Degrees F FSC 5306
Bolt, Alloy Steel, Shear andTensile (156 KSI MIN Fsu and 260 KSI MIN Ftu), 450 Degrees F,
ExternalWrenching, Flanged Head FSC 5306
Nuts, Self-Locking, AlloySteel, 260 KSI Ftu, 450 Degrees F, General Specification for FSC 5310
Nut, Self-Locking, AssembledWasher, Alloy Steel, 220 KSI Ftu, 450 Degrees F, (12-Spline Wrenching
Element)FSC 5310
Fastener, Blind, HighStrength, Installation Formed Corrosion Resistant Steel, Heat Resistant Steeland Titanium
General Specification for FSC 5320
Fasteners, Blind, HighStrength, Installation Formed, Corrosion Resistant and Heat Resistant Steeland Titanium,
Design and Usage Limitations for FSC 5320
Fasteners, Blind, HighStrength, Corrosion Resistant and Heat Resistant Steel, Flush Head, Type II,Class 1 FSC
5320
Fasteners, Blind, Titanium,Flush Head, Type II, Class 2 FSC 5320
Fasteners, Blind, HighStrength, Corrosion Resistant and Heat Resistant Steel, Protruding Head, TypeII, Class 1
FSC 5320
Fasteners, Blind, Titanium,Protruding Head, Type II, Class 2 FSC 5320
Fasteners, Blind, HighStrength, Titanium/Cres, Protruding Head, Type I, Class 2 FSC 5320
Fasteners, Blind, HighStrength, Titanium/Cres, Flush Head, Type I, Class 2
Nut, Self-Locking, Steel, 260KSI Ftu, 450 Degrees F FSC 5310
Nuts, Alloy Steel, Shear andTensile, Self-Locking, (180 KSI Ftu 450 Degrees F), General Specification forFSC
5310
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1)

Recess-Cross, Low TorqueDrive, Dimensions and Gage Dimensions for FSC 5305
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile
(Rev. 1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile
(Rev. 1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile
(Rev. 1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile
(Rev. 1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile
(Rev. 1)
Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile
(Rev. 1)
Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed Style A, Class 1, Code B and E FSC
5320;Rev 3
Rivet-Blind, 100 Degree FlushHead, Mechanically Locked Spindle, Bulbed Style A, Class 2, Code B and E
FSC5320; Rev 3
Rivet-Blind, 100 Degree FlushShear Head, Mechanically Locked Spindle, Bulbed Style A, Class 3, Code B
andE FSC 5320; Rev 3
Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed Style B, Class 1, Code B and E FSC
5320;Rev 3
Rivet-Blind, 100 Degree FlushHead, Mechanically Locked Spindle, Bulbed Style B, Class 2, Code B and E
FSC5320; Rev 3
Rivet-Blind, Flanged DomeHead, Mechanically Locked Spindle, Bulbed Style B, Class 4, Code B and E
FSC5320; Rev 3
Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed Style A, Class 1, Code M REV 3; FSC
5320
Rivet-Blind, 100 Degree FlushHead, Mechanically Locked Spindle, Bulbed Style A, Class 2, Code M REV 3;
FSC5320
Rivet-Blind, 100 Degree FlushShear Head, Mechanically Locked Spindle, Bulbed Style A, Class 3, Code M
REV3; FSC 5320

Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed Style B, Class 1, Code M and C REV 3;
FSC5320
Rivet-Blind, 100 Degree FlushHead, Mechanically Locked Spindle, Bulbed Style B, Class 2, Code M and C
REV3; FSC 5320
Rivet-Blind, Flanged DomeHead, Mechanically Locked Spindle, Bulbed Style B, Class 4, Code M REV 3;
FSC5320
Pin, Spring, Tubular (Coiledand Slotted) FSC 5315
Nut, Self-Locking,Lightweight, Castellated, 450 Degrees F FSC5310
Nut, Self-Locking,Lightweight, Thin, Castellated, 450 Degree F FSC 5310
Washer, Flat, Round, CorrosionResisting Steel (For Electrical Applications) FSC 5310
Washer, Recessed CountersunkTwo Surfaces, for Use with Wheel Bolts and Nuts up to and Including 180
KSIFtu FSC 5310
Nut, Wheel, Self-Locking,Flanged, Steel, 180 KSI Ftu, 450 Degrees F, Spline Drive FSC 5310
Bolt, Wheel, Tension, Flanged,Steel, 180KSI Ftu, 450 Degrees F, External Spline Drive FSC 5306
Nut, Wheel, Self-Locking,Flanged Steel, 220 KSI Ftu, 450 Degrees F, Spline Drive FSC 5310
Washer, Recessed, CountersunkTwo Surfaces, for Use with Wheel Bolts and Nuts up to and Including 220
KSIFtu FSC 5310
Nut, Plate, Self-Locking,Floating, Two Lug, Reduced Rivet Spacing, Steel, (Polyamide Insert) 500Cycles
Reuse, Replaceable Nut, 160 KSI Ftu, 450 Degrees F FSC 5310
Bolt, Tension: Nickel Alloy718; 220 KSI Ftu; External Wrenching, Spline Drive, Flanged Head Rev.1;
FSC5306
Nut, Self-Locking, ExtendedWasher, Round, Nickel Alloy 718, 220 KSI Ftu, 450 Degrees and 800 Degrees
F,Spine Drive FSC 5310
Washer, Countersunk and Plain,for Use with Bolts and Nuts Up to and Including 220 KSI Ftu FSC 5310
Recess - Offset Cruciform,Ribbed Dimensions of Recess, Gage and Driver for Rev.2; FSC 53GP
Lock, Rod End, Extra Strength,High Profile Lug FSC 5340
Nut, Floating, Self Locking,Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 KSI
Ftu,Replaceable Nut Element FSC 5310
Nut, Floating, Self Locking,Attached Retention Element (A.R.E.), 450 Degrees F, Cres (A-286), 125 KSIFtu,
Replaceable Nut Element FSC 5310
Nut Element, Replaceable,Attached Retention Element (A.R.E), 450 Degrees F, CRES (A-286), 125 KSI
FtuFSC 5310
Nut Element, AttachedRetention Element (A.R.E.), 450 Degrees F, Steel, (AISI 1050 or 4130), 125KSI Ftu
FSC 5310

Rivet, Solid, 120 DegreesFlush Interference Shear Head FSC 5320

Rivet, Solid, 120 Degree FlushInterference, Tension Type Head FSC 5320
Nut, Self-Locking, 450 DegreesF, Hexagon, Reduced Head Height, Ring Base, Corrosion Resistant Steel
FSc5310
Clamp, Loop, Cushioned,Rectangular, Metric FSC 5340
Bolt, Wheel, Nickel Alloy 718,220 KSI Ftu, 132 KSI Fsu, 450 Degrees F, External Wrenching, Spline
Drive,Flanged Head FSC 5306
Nut, Wheel, Self-Locking,Flanged, Nickel Alloy 718, 220 KSI Ftu, 450 Degrees F, Spline Drive FSC 5310
Nut, Self-Locking, Channel,Floating, Carbon Steel, 125 KSI, Ftu FSC 5310
Pin, Quick Release withWarning Streamer Assembly FSC 5315
Washer, Flat-Metal, RoundGeneral Purpose FSC 5310
Fasteners, ExternallyThreaded, Self-Locking Design and Usage Limitations for FSC 5305
Stud, ContinuousThread-(Bolt-Stud), B16 Alloy Steel, High Temperature Service (875 - 1000 F.)FSC 5307
Bolt, Machine, Regular Semi-FinishedHexagon Head, Copper-Silicon Alloy (Silicon Bronze), Unc-2A, NonMagneticFSC 5306
Bolts, Machine, Hexagon Head,Regular Semi-Finished, Aluminum Alloy, Unc-2A, Non-Magnetic FSC 5306
Bolts, Machine, Hexagon Head,Semifinished Corrosion Resisting Steel UNC-2A, Nonmagnetic FSC 5306
Screws, Machine, FlatCountersunk Head, Slotted, Copper-Silicon Alloy, UNC-2A, Nonmagnetic FSC 5305
Nut, Self-Locking,Hexagon-Thin, UNC-3B (Non Metallic Insert) Austenitic Corrosion ResistantSteel,
Nonmetallic, 250 Degrees F FSC 5310
Grommet, Metallic, GeneralSpecification for FSC 5325
Grommet, Metallic, Plain, withToothed Washer (Type II) FSC 5325

Grommet, Metallic, Oblong,with Flat Washer (Type IV) FSC 5325

Grommet, Metallic, Oblong,with Raised Washer (Type V) FSC 5325

Rivet-Tubular, Oval Head FSC5320

Rivet, Tubular, 150 DegreeFlat Countersunk Head FSC 5320
Pin, Straight, Headless(Dowel) (.0002 over Nominal Size) FSC 5315
Pin, Straight, Headless(Dowel) (.001 Over Nominal Size) FSC 5315
Pin, Spring-Tubular, SlottedFSC 5315
Pin, Tapered, Plain FSC 5315
Screw, Cap, SocketHead-Hexagon, Corrosion Resistant Steel, UNC-3A FSC 5305
Screw, Cap, SocketHead-Hexagon, Corrosion Resistant Steel, UNF-3A FSC 5305
Fastener, Rotary,Quick-Operating, Flush Head, Floating Type, 2210 lbs min Tensile Strength
Fastener, Rotary,Quick-Operating, Protruding Head Floating Type, 2210 lbs min Tensile Strength
Nut, Self-Locking, Hexagon,Regular-Height, (Non- Metallic Insert) 250 Degrees F, Nickel-Copper Alloy
FSC5310
Nut, Self-Locking, Hexagon,Regular Height, 250 Degrees F, (Non-Metallic Insert) Non-CorrosionResistantSteel FSC 5310
Nut, Self-Locking,Hexagon-Regular, 250 Degrees F, and 450 Degrees F (Non-Metallic Insert), 300Series
Corrosion Resistant Steel FSC 5310
Fasteners, Screw Threaded,Descriptive Factor Symbols and Order of Notes for Engineering Documents forFSC
53GP
Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, Button Handle FSC 5315
Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, "T" Handle FSC5315
Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, "L" Handle FSC5315
Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, Ring Handle FSC 5315
Pin, Quick Release, Self-Retaining,Positive Locking, Double Acting, "T" Handle FSC 5315
Pin, Quick Release,Self-Retaining Positive Locking, Double Acting "L" Handle FSC 5315
Pin, Quick Release, PositiveLocking, Double Acting, Ring Handle FSC 5315
Setscrew, Hexagon Socket, CupPoint, 250 Degrees F, Self Locking Element, Alloy Steel, Cadmium Plated
FSC5305

Setscrew, Hexagon Socket, CupPoint, 250 Degrees F, Self Locking Element, Corrosion Resisting
Steel,Passivated FSC 5305
Setscrew, Hexagon Socket, ConePoint, 250 Degrees F, Self Locking, Element, Alloy Steel, Cadmium Plated
FSC5305
Washer, Countersunk and Plain,High Strength FSC 5310
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306

Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306

Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306
Key, Machine - Rectangular inCross Section, Both Ends Square FSC 5315
Key, Machine-Square in CrossSection, Both Ends Square FSC5315
Key, Machine-Square in CrossSection, One End Square, Other End Round FSC 5315
Key, Machine-Square in CrossSection, Both Ends Round FSC 5315
Bolt, Machine, Aircraft,Drilled Head, Fine Thread FSC 5306
Bolt, Machine, Aircraft,Drilled Head, Coarse Thread FSC 5306; Revision 1
Grommets, Metallic, Plain andSpur, with Washers, Type I and Type III FSC 5325
Pin, Straight. Headed DrilledShank FSC5315
Rivet, Solid, Countersunk 100Degrees, Precision Head, Aluminum and Titanium Columbium Alloy FSC 5320
Rivet, Solid - 100 DegreeCountersunk Head, Carbon Steel, Corrosion-Resistant Steel, Monel and CopperFSC
5320
Rivet, Solid, Universal Head,Aluminum Alloy and Titanium Columbium Alloy FSC 5320
Nut, Self-Locking, Plate, TwoLug, 1200 Degrees F, 125 KSI Ftu FSC 5310
Rivet, Blind, Structural PullStem, Self-Plugging, Protruding Head, Type II FSC 5320
Rivet, Blind, Structural PullStem, Self-Plugging, 100 Degree Flush Head, Type II FSC 5320
Rivet, Blind, Nonstructural,Universal Head, Class 1 FSC 5320

Rivet, Blind, Nonstructural,100 Degree Flush Head FSC 5320

Rivet, Solid - Universal Head,Steel, Carbon and Steel, Corrosion - Resistant FSC 5320
Rivet, Solid-Universal Head,Brass, Copper, Nickel- Copper Alloy REV 1; FSC 5320
Eyelets, Metallic, and EyeletWashers, Metallic FSC 5325
Eyelets, Metallic, RolledFlange Type; and Eyelet Washer FSC 5325

Pin, Grooved, Headless,Longitudinal Groove FSC 5315

Wire, Safety or Lock FSC 9505
Nut, Castellated, Hexagon FSC5310
Nut, Self-Locking, 450 DegreesF, Reduced Hexagon, Reduced Height, Ring Base, Non-Corrosion Resistant
SteelFSC 5310
Nut, Self-Locking, 800 DegreesF, Reduced Hexagon, Reduced Height, Ring Base, Corrosion Resistant Steel
FSC5310
Nut, Self-Locking, Hexagon,Regular Height, 250 Degrees F, 125 KSI Ftu and 60 KSI Ftu FSC 5310
Nut, Self-LockingHexagon-Regular Height, 450 Degrees F, 125 KSI Ftu FSC 5310
Nut, Self-Locking,Hexagon-Regular Height, 800 Degrees F, 125 KSI Ftu FSC 5310
Nut, Self-Locking, Plate, TwoLug, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800 Degrees F FSC 5310
Nut, Self-Locking, Plate, TwoLug, 100 Degree CSK Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310
Nut, Self-Locking, Plate, TwoLug, 100 Degree CSK, Low Height, Cres, 125 KSI Ftu, 450 Degrees and
800Degrees F FSC 5310
Nut, Self-Locking, Plate, OneLug, Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310
Nut, Self-Locking, Plate, OneLug, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800 Degrees F FSC5310
Nut, Self-Locking, Plate, OneLug, 100 Degree CSK, Low Height, Alloy Steel, 125 KSI Ftu, 450 Degrees
FFSC5310
Nut, Self-Locking, Plate, OneLug, 100 Degree CSK, Low Height, Cres, 125 KSI Ftu, 450 Deg. & 800 Deg
F.FSC5310
Nut, Self-Locking, Plate,Corner, Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310

Nut, Self-Locking, Plate,Corner, Low Height, Cres, 125KSI Ftu, 450 Degrees F & 800 Degrees F FSC5310
Nut, Self-Locking, Plate,Corner, 100 Degrees CSK Low Height, Alloy Steel, 125 KSI Ftu, 450 Degrees FFSC
5310
Nut, Self-Locking, Plate,Corner, 100 Degree CSK, Low Height, CRES, 125 KSI Ftu, 450 Degrees F and
800Degrees F FSC 5310
Nut, Self-Locking, Plate, TwoLug, Floating, Low Height Steel, 125 KSI Ftu, 450 Degrees F FSC 5310
Nut, Self-Locking, Plate, TwoLug, Floating, Low Height, CRES, 125 KSI Ftu, 450 Degrees F and 800 Degrees
FFSC 5310
Nut, Self-Locking, Plate, OneLug, Floating, Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310
Nut, Self-Locking GangChannel, Floating, Low Height, Steel, 125 KSI Ftu, 250 Degrees F FSC 5310
Nut, Self-Locking GangChannel, Floating, Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310
Nut, Self-Locking, Channel,Floating, Low Height, Cres, 125KSI Ftu, 450 Degrees F and 800 Degrees F
Nut, Self-Locking, GangChannel, 100 Degree CSK, Floating, Low Height, Steel, 125 KSI Ftu, 250Degrees F
FSC 5310
Nut, Self-Locking GangChannel, 100 Degree CSK, Floating, Low Height, Steel, 125 KSI Ftu, 450Degrees F
FSC 5310
Nut, Self-Locking GangChannel, 100 Degree CSK, Floating, Low Height, CRES, 125 KSI Ftu, 450 DegreesF
& 800 Degrees F FSC 5310
Nuts, Self-Locking, Plate,Two-Lug, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees
FFSC 5310
Nut, Self-Locking, Plate, TwoLug, Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu, 450 Degrees F
and800 Degrees F FSC 5310
Nut, Self-Locking, Plate,One-Lug, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees
FFSC 5310
Nut, Self-Locking, Plate, One-Lug,Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu, 450 Degrees F
and 800Degrees F FSC 5310
Nut, Self-Locking, Plate,Corner, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees
FRevision 1; FSC 5310
Nut, Self-Locking, Plate,Corner, Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu, 450 Degrees F&
800 Degrees F FSC 5310
Nut, Self-Locking, Plate, TwoLug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu,
450Degrees F FSC 5310; Rev. 1
Nut, Self-Locking, Plate, TwoLug, Floating, Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu,
450Degrees F and 800 Degrees F Revision 1; FSC 5310
Nut, Self-Locking, Plate, TwoLug, Floating, Non- Metallic Insert, Steel 125 KSI Ftu, 250 Degrees F FSC5310
Nut, Self-Locking, Plate, TwoLug, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F FSC 5310

Nut, Self-Locking, GangChannel, Non-Metallic Insert, 125 KSI Ftu, 250 Degrees F FSC 5310
Nut, Self-Locking, Plate, OneLug, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F FSC5310
Nut, Self-Locking, Plate,Corner, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F FSC 5310
Nut, Self-Locking, Plate, OneLug, Floating, Non- Metallic Insert, Steel 125 KSI Ftu, 250 Degrees F FSC5310
Nut, Self-Locking, Hexagon,Non-Metallic Insert, Low Height, 250 Degrees F FSC 5310
Nut, Self-Locking, Steel, 220KSI Ftu, 450 Degrees F, Flanged, MS33787 Wrenching Element FSC 5310
Nut, Self-Locking, Steel, 260KSI Ftu, 450 Degrees F, Flanged, MS33787 Wrenching Element FSC 5310
Nut, Self-Locking, Plate,Side, by Side, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450Degrees F
FSC 5310
Nut, Self-Locking, Plate, Sideby Side Reduced Rivet Spacing, Low Height, Cres, 125 KSI Ftu, 450 Degrees&
800 Degrees F. FSC5310
Screw, Self-Locking, 250Degrees F, Steel, 55 KSI Ftu, 100 Degree Flat Head, Cross Recessed FSC 5305
Bolt, Self-Locking, 250Degrees F; Steel, 75 KSI Fsu, 125 KSI Ftu, Hex Head FSC 5306
Bolt, Self-Locking, 250Degrees F, Cres, 48 KSI Fsu, 80 KSI Ftu, Hex Head FSC 5306
Bolt, Self-Locking, 75 KSIFsu, 125 KSI Ftu Pan Head, Cross Recessed FSC 5306
Bolt, Self-Locking, 250Degrees F., Cres, 48 KSI Fsu, 80 KSI Ftu Pan Head, Cross Recessed FSC 5306
Bolt, Self-Retaining, PositiveLocking, Cres 90 KSI Fsu, 63 KSI Ftu, Pan Head, 450 Degrees F & 650Degrees
F FSC 5306
Bolt, Self-Retaining, PositiveLocking, Cres 90 KSI Ftu, 63 KSI, 100 Degree Flush Head, 450 Degrees F &650
Degrees F FSC 5306
Wrenching Element, External,Hexagon, for Threaded Fasteners FSC 53GP
Nut, Self-Locking, Steel, 180KSI Ftu, 450 Degrees F, Flanged, MS33787 Wrenching Element FSC 5310
Bolt, Tension, Steel, 180 KSIFtu, 450 Degrees F External Wrenching, Spline Drive, Flanged FSC 5306
Fasteners, Blind, HighStrength, Pull Type, Positive Mechanical Lock, 100 Degree Flush Head,Corrosion
Resisting Steel, 95 KSI Fsu FSC 5320
Pin, Straight, Headless(Dowel), General Specification for FSC 5315

Pin, Straight, Headless,(Dowel) (.0002 Over Size), Cres 303 FSC 5315

Pin, Straight, Headless,(Dowel) (.0002 Under Size), Cres 303 FSC 5315

Screw, Tapping, 100 DegreeFlat Head, Spaced Thread FSC 5305

Insert, Screw Thread, Coarseand Fine, Screw Locking, Helical Coil, Cres FSC 5325
Nut, Self-Locking,Castellated, Hexagon Counterbored, Assembled Washer, 250 Degrees FNon-Metallic Insert
(for Self-Retaining Bolts) FSC 5310
Nut, Self-Locking,Castellated, Hexagon - 800 Degrees F FSC 5310
Nut, Castellated, Hexagon,Counterbored Assembled Washer, 450 Degrees F, (for Self-Retaining Bolts)
FSC5310
Nut, Self-Locking, Hexagon,Thin, 450 Degrees F, 80 KSI Ftu FSC 5310
Bolt, Tension, Steel, ExternalWrenching, Flanged, 12 - Point, 180 KSI Ftu, 450 Degrees F FSC5306
Screws, Self Locking, 250Degrees F, Cylindrical Head Hexagonal Wrenching Socket, Alloy Steel, 160 KSIFtu
(Socket Head Cap Screws) FSC 5305
Grommet, Plastic, Edging FSC5325
Screw, Machine - Steel,Drilled Double Hexagon, Extended Washer, .164-36 (Mil-S-8879 Thread) FSC 5306
Screws, Self Locking, 250Degrees F, Cylindrical Head, Hexagonal Wrenching Socket, Corrosion
ResistingSteel 80 KSI Ftu (Socket Head Cap Screws) FSC 5306
Bolt, Tension, Steel, 260 KSIFtu, 450 Degrees F, External Wrenching, Spline Drive, Flanged Head FSC 5306
Bolt, Tension, Steel, 220 KSIFtu, 450 Degrees F External Wrenching, Spline Drive, Flanged Head FSC 5306
Screw, Drive, Round Head, TypeU, Steel, Carbon, Cadmium Plated FSC 5305
Clamp, Loop-Aluminum, Plainand Cushioned FSC 5340
Stud - Style I SnapslideFastener FSC 5325
Stud - Style III SnapslideFastener FSC 5325
Stud - Style IV SnapslideFastener FSC5325
Fastener Installation -Snapslide FSC 5325

Fastener - Snapslide FSC 5325

Clamp, Loop-Steel, Plain andCushioned FSC 5340
Clamp, Loop-Double, Cable orTube, Steel, Plain and Cushioned FSC 5340
Nut, Plain, Hexagon-Azimuth(with Lockwire Holes) FSC 5310
Screw, Shoulder, HexagonSocket-Head and Slotted-Head General Specification for FSC 5305
Grommet, Edging FSC 5325
Grommet, Composite, Edging FSC5325

Grommet, Cushion Composite,Edging FSC 5325

Fastener, Rotary,Quick-Operating, High-Strength FSC 5325

Pin, Quick-Release,Self-Retaining, Positive-Locking FSC 5315
Bolt, Self-Retaining, PositiveLocking FSC 5306
Clip, Solid, Spring TensionFSC 5340

Clip, Single Slot, SpringTension FSC 5340

Clip, Double Slot, SpringTension FSC 5340

Casters, Rigid and Swivel,Precision Pneumatic Tired FSC 5340

Casters, Rigid and Swivel,Precision Spring Mounted FSC 5340
Screw, Tapping-Thread Cutting,Type BF or BT, Pan Head, Cross-Recessed, Carbon Steel FSC 5305
Screw, Tapping-Thread Cutting,Type D, F, G, or T, Flat 82 Degree Countersunk Head, Cross-Recessed,
CarbonSteel FSC 5305
Screw, Tapping - ThreadCutting, Types D, F, G or T, Flat 82 Degrees Countersunk Head,Cross-Recessed,
Corrosion-Resisting Steel FSC 5305

Screw, Tapping-Thread Cutting,Types D,F,G, or T, Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated
FSC5305
Screw, Tapping-Thread Cutting,Types D,F,G or T, Pan Head, Cross Recessed, Corrosion Resisting Steel FSC
5305
Screw, Tapping, ThreadCutting-Types D,F,G and T, Approximate Hole Sizes for FSC 5305
Rivet, Blind-Countersunk Head,Drive Type FSC 5320
Pin, Cotter, (Split) FSC 5315
Screw, Cap, Socket Head, FlatCountersunk, 82 Degree, Alloy Steel, UNC-3A FSC 5305
Screw, Cap, Socket Head, FlatCountersunk, 82 Degree, Corrosion-Resisting Steel, UNC-3A FSC 5305
Screw, Cap, Socket Head,Hexagon, Drilled Corrosion- Resisting Steel (UNF-3A) FSC 5305
Screw, Cap, Socket Head,Hexagon, Drilled Corrosion- Resisting Steel (UNC-3A) FSC 5305
Screw, Cap, Socket Head,Hexagon, Drilled Alloy Steel, (UNC-3A) FSC 5305
Screw, Cap, Socket Head,Hexagon, Drilled Alloy Steel, (UNF-3A) FSC 5305
Pin, Tapered, Plain FSC 5315
Screw, Machine, FlatCountersunk Head, 100 Degree, Cross Recessed, UNC-2A and UNF-2A FSC 5305
Screw, Machine, FlatCountersunk Head, 100 Degree, Structural, Cross Recessed, UNC-3A and UNF-3AFSC
5305
Nut, Self-Locking, 250 DegreesF, 450 Degrees F, and 800 Degrees F FSC 5310
Screw, Externally RelievedBody FSC 5305
Fasteners, Straight, Headed,Swaged Collar Limitations for Use of FSC 5325
Washers, for Use with AircraftAluminum Terminals FSC 5310
Screw, Machine-Pan Head,Structural, Cross Recessed FSC 5305; Rev. 1
Clevis, Rod End - Turnbuckle(General Purpose) FSC 5340
Rivet, Blind, Drive Type FSC5320
Key, Woodruff, Alloy Steel FSC5315

Bolt, Self-Retaining, ImpedanceType, 95 KSI Fsu, Hex Head, 450 Degrees F FSC 5306
Screw, Close Tolerance, 95 KSIFsu, Flush Head, 450 Degrees F FSC 5305
Bolt, Hook - Turnbuckle(General Purpose) FSC 5306
Turnbuckle, Body (GeneralPurpose) FSC 5340
Clevis, Rod End-Adjusting,Wide and Narrow Forks FSC 5340
Fasteners, Snap, Style 2(Regular Wire Spring Clamp Type) FSC 5325
Fasteners, Snap, Style 2A(Small Wire Spring Clamp Type) FSC 5325
Fasteners, Snap, Style 4(Three Way Locking Type) FSC 5325
Fasteners, Snap, Style 5(Scalloped Button Head Type) FSC5325
Fasteners, Snap, Style 7(Rivet Type) FSC 5325
Clamp, Instrument Mounting,Aircraft FSC 5340
Safety Wiring and CotterPinning, General Practices for FSC 53GP
Pins, Spring, FunctionalLimitations of FSC 5315
Nonstructural Rivets for BlindAttachment; Limitations for Design and Usage FSC 5320
Nut, Self-Locking, Aircraft,Reliability and Maintainability Usage Requirements for FSC 5310
Rivets, Blind, Structural,Mechanically Locked and Friction Retainer Spindle, (Reliability andMaintainability)
Design and Construction Requirement for FSC 5320
Bolts, Self-Retaining,Aircraft, Reliability and Maintainability, Design and Usage Requirements forFSC 5306
Nut, Sheet Spring, InstrumentMounting FSC 5310
Screw - Installation andLimitations for Usage of Thread Cutting and Thread Forming FSC 5305
Recess-Dovetail, Slot andConical Dovetail Slot, Dimensions of Recess, Gage and Driver for FSC 53GP
Recess - Offset Cruciform,Dimensions of Recess, Gage and Driver for Rev.2; FSC 53GP
Strap, Retaining, One Hole forPipe, Rigid Conduit and Cable FSC 5340

Screw, Machine-82 Degree FlatCountersunk Head, Cross- Recessed, Carbon Steel, Cadmiun Plated, UNC-2A
FSC5305
Screw, Machine - 82 DegreeFlat Countersunk Head, Cross-Recessed, Carbon Steel, Cadmium Plated, UNF2AFSC 5305
Screw, Machine-FlatCountersunk Head, 82 Degree, Cross- Recessed, Brass, UNC-2A FSC 5305
Screw, Machine-FlatCountersunk Head, 82 Degree, Cross- Recessed, Brass, Black Chemical Finish,UNF-2A
FSC 5305
Screw, Machine-Flat CountersunkHead, 82 Degree, Cross- Recessed, Aluminum Alloy, Anodic Coated, UNC2A FSC5305
Screw, Machine-Pan Head,Cross-Recessed, Carbon Steel, Cadmium Plated, UNC-2A FSC 5305
Screw, Machine-Pan Head, CrossRecessed, Carbon Steel, Cadmium Plated, UNF-2A (IN./MM) FSC 5305
Screw, Machine-Pan Head, CrossRecessed, Brass, UNC-2A FSC 5305
Screw, Machine-Pan Head,Cross-Recessed, Brass, UNF-2A FSC 5305
Screw, Machine-DrilledFillister Head, Slotted, Brass, Black Chemical Finish, UNC-2A FSC 5305
Screw, Machine-DrilledFillister Head, Slotted, Brass, Black Chemical Finish, UNF-2A FSC 5305
Screw, Machine-DrilledFillister Head, Slotted, Corrosion Resisting Steel, Passivated, UNC-2A FSC5305
Screw, Machine-DrilledFillister Head, Slotted, Corrosion Resisting Steel, Passivated, UNF-2A FSC5305
Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Steel, Corrosion Resisting, Passivated, UNC-2A
FSC5305
Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Steel, Corrosion Resisting, Passivated, UNF-2A FSC5305
Pin, Grooved,Headless-Longitudinal Taper Groove, Carbon Steel FSC 5315
Pin, Grooved,Headless-Longitudinal Taper Groove, Corrosion-Resisting Steel FSC 5315
Pin, Grooved,Headless-Longitudinal Straight Groove, Carbon Steel FSC 5315
Pin, Grooved, Headless-LongitudinalStraight Groove, Corrosion-Resisting Steel FSC 5315
Pin, Grooved,Headless-Longitudinal Center Groove, Carbon Steel FSC 5315
Pin, Grooved,Headless-Longitudinal Center Groove, Corrosion-Resisting Steel FSC 5315
Bolt, Square Neck, Round Head(Carriage) Steel, Cadmium or Zinc Plated, Unc-2A FSC 5306

Key, Wooddruff, Steel, Alloy,with Keyway and Key Slot Dimensions FSC 5315
Handle, Bail-Chest, SurfaceMounting Countersunk Holes FSC 5340
Handle, Bail Chest, RecessedFSC 5340
Handle, Bail-Chest, SurfaceMounting, Plain Holes FSC 5340
Clevis, Rod, End-Adjustableand Plain, Steel FSC 5340
Pin, Spring-Tubular, Coiled,Heavy Duty FSC 5315
Handle, Bow FSC 5340
Snap Hooks, Wire Body, FixedLoop Eye, Flat Spring Closure, with Retainer FSC 5340

Snap Hooks, Wire Body, FixedLoop Eye, Side Retaining Closure FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye, with Roller, Flat Spring Closure, Narrow Mouth FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye with Roller, Flat Spring Closure, Wide Mouth FSC 5340

Snap Hooks, Cast Body, FixedEye, Sliding Bolt Closure FSC 5340

Snap Hooks, Cast Body, SwivelEye, Sliding Bolt Closure FSC 5340

Snap Hooks, Cast Body, LoopEye Swivel FSC 5340

Snap Hooks, Cast Body, RoundEye Swivel FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye, Trigger Closure FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye W/O Roller, Flat Spring Closure, Wide Mouth FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye W/O Roller, Flat Spring Closure, Light Duty FSC 5340

Snap Hooks, Cast Body, FixedRound Eye W/O Roller, Flat Spring Closure FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye W/O Roller, Flat Spring Closure, Narrow Mouth FSC 5340

Snap Hooks, Cast Body, OpenEye, Sliding Bolt Closure FSC 5340

Washers, Shouldered, Recessed,Saddle, Concave and Convex, General Specification for FSC 5310
Washer, Shouldered, Polyamide(Nylon) FSC 5310

Washer, Shouldered,Polytetrafluoroethylene FSC 5310

Washer, Recessed, AluminumAlloy FSC 5310

Washer, Saddle, Steel, CarbonFSC 5310

Washer, Saddle, Aluminum AlloyFSC 5310

Washer, Convex, Steel, AlloyFSC 5310

Washer, Concave, Steel, AlloyFSC 5310

Washer, Shouldered, PhenolicFSC 5310

Bolt, Eye, GeneralSpecification for FSC 5306

Stud, Locked in, Ring Locked,Serrated, General Specification for FSC 5307
Stud, Locked in - key Locked,General Specification for FSC 5307

Nut, Plain, Clinch and Nut,Self-Locking, Clinch General Specification for FSC 5310
Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Hexagon Head and Shank, Swage Clinch) FSC 5310

Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Self Clinching, Knurled Collar, 450 Degrees F and
600Degrees F) FSC 5310
Nut, Plain, Self-ClinchingFlush FSC 5310

Nut, Self-Locking, Clinch,(Swage-Clinching, Knurled Shank, Miniature, 250 Degrees F) FSC 5310

Nut, Self-Locking, Clinch,(Swage-Clinching, Knurled Shank, Miniature, 450 Degrees F or 800 Degrees F)FSC
5310
Nut, Plain Clinch and Nut, Self-LockingClinch (Knurled Collar, Miniature, 450 Degrees F) FSC 5310

Nut, Self-Locking, Clinch(Swage-Clinching, Knurled Shank, 250 Degrees F, UNJC-3B) FSC 5310

Nut, Self-Locking, Clinch(Swage-Clinching, Knurled Shank, 250 Degrees F, UNJF-3B) FSC 5310

Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Self- Clinching) Round FSC 5310

Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Floating, 400 Degrees F FSC 5310

Nut, Plain, Spline, Round FSC5310

Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Self- Clinching, Knurled Collar, Miniature, Floating,450
Degrees F and 600 Degrees F) FSC 5310
Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Self- Clinching, Knurled Collar, Floating, 450 DegreesF and
600 Degrees F) FSC 5310
Rivets, Blind, Self-PluggingPreparation for and Installation of FSC 5320

Rivets, Buck Type, Preparationfor and Installation of FSC 5320

Setscrew-Hexagon Socket, CupPoint, Corrosion- Resisting Steel, Passivated, UNC-3A, Plain and Self-Locking
FSC 5305
Setscrew-Hexagon Socket, CupPoint, Corrosion- Resisting Steel, Passivated, UNF-3A, Plain and Self
LockingFSC 5305
Setscrew-Hexagon Socket, FlatPoint, Corrosion- Resisting Steel, Passivated, UNC-3A, Plain and Self-Locking
FSC 5305
Setscrew-Hexagon Socket, FlatPoint, Corrosion- Resisting Steel, Passivated, UNF-3A, Plain and Self-Locking
FSC 5305
Setscrew-Hexagon Socket, ConePoint, Corrosion- Resisting Steel, Passivated, UNC-3A & UNF-3A, Plain
andSelf Locking FSC 5305
Setscrew-Hexagon Socket,Half-Dog Point, Corrosion- Resisting Steel, Passivated, UNC-3A FSC 5305
Setscrew-Hexagon Socket,Half-Dog Point, Corrosion- Resisting Steel, Passivated, UNF-3A FSC 5305
Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Grade 5,Cadmium
Plated, UNF-2A, Plain and Self-Locking FSC 5305
Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Grade 5,Cadmium
Plated, UNC-2A FSC 5305
Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Corrosion-Resisting,
Passivated, UNC-2A FSC 5305
Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Corrosion-Resisting,
Passivated, UNF-2A FSC 5305
Pin, Straight, Headless FSC5315
Bolt, Machine, Hex Head, FullyThreaded, Fine Thread, Metric FSC 5306
Bolt, Machine, Hex Head, FullyThreaded, Fine Thread, Metric FSC 5306
Screw, Cap, Hex Head, FullyThreaded - Metric FSC 5306
Screw, Shoulder, Slotted-Head,Corrosion-Resistant Steel FSC 5305
Screw, Shoulder, Slotted-Head,Hexagon, Corrosion- Resistant Steel FSC 5305
Stud, Locked in, Key-Locked,Lightweight FSC 5307
Stud, Locked in, Key-Locked,Heavy Duty FSC 5307
Pin, Straight, Steel-Drill RodFSC 5315
Screw, Tapping-Thread Forming,Type AB, Hexagon Head, Slotted FSC 5305

Screw, Tapping-HighPerformance, Thread Rolling, Types SF, SW and TT, Pan Head, Cross RecessedFSC 5305
Stud - Plain, General PurposeFSC5307
Screw, Tapping-HighPerformance, Zone Hardened Structural Thread Rolling, Hexagon Washer Head FSC5305
Screw, Externally RelievedBody, Panhead, Cross- Recessed, Corrosion-Resisting Steel, UNC-2A FSC 5305
Pin, Spring-Tubular, Coiled,Standard Duty
Pin, Straight-Headless;Drilled for Cotter Pins FSC 5315
Strap, Retaining, One Hole forThin Wall Conduit (EMT) FSC 5340
Screw, Machine Pan-Head,Cross-Recessed, Corrosion Resisting Steel, UNF-2A FSC 5305
Screw, Machine, FlatCountersunk Head, 82 Degrees, Cross-Recessed, Corrosion-Resistant Steel,UNC-2A FSC
5305
Setscrew - Hexagon Socket, CupPoint, Alloy Steel, Cadmium Plated, UNC-3A, Plain and Self-Locking FSC
5305
Setscrew, Hexagon Socket, CupPoint, Alloy Steel, Cadmium Plated, UNF-3A, Plain and Self-Locking FSC
5305
Setscrew - Hexagon Socket,Flat Point, Alloy Steel, Cadmium Plated, UNC-3A, Plain and Self-Locking
FSC5305
Setscrew - Hexagon Socket,Flat Point, Alloy Steel, Cadmium Plated, UNF-3A, Plain and Self-Locking
FSC5305
Setscrew - Hexagon Socket,Cone Point, Alloy Steel, Cadmium Plated, UNC-3A, Plain and Self-Locking
FSC5305
Setscrew - Hexagon Socket,Cone Point, Alloy Steel, Cadmium Plated, UNF-3A, Plain and Self-Locking
FSC5305
Screw, Shoulder - Socket Head,Hexagon, Alloy Steel, Cadmium Plated, UNC-3A FSC 5305
Setscrew-Hexagon Socket,Half-Dog Point, Alloy Steel, Cadmium Plated, UNF-3A FSC 5305
Setscrew-Hexagon Socket,Half-Dog Point, Alloy Steel, Cadmium Plated, UNC-3A FSC 5305
Setscrew-Hexagon Socket, OvalPoint, Alloy Steel, Cadmium Plated, UNC-3A FSC 5305
Setscrew-Hexagon Socket, OvalPoint, Alloy Steel, Cadmium Plated, UNF-3A FSC 5305
Pin, Spring-Tubular, Coiled,Light Duty FSC 5315

Stud, Self-Locking, FlushHead, Ribbed Clinch Type FSC 5307

Stud, Self-Locking, Flush andProtruding Head FSC 5307

Stud, Self-Clinching, FlushHead, Hex Clinch Type FSC 5307

Stud, Self-Locking, ConcealedHead, Knurled Clinch Type FSC 5307

Stud, Self-Locking, ConcealedHead, Hex Clinch Type FSC 5307

Stud, Self-Locking, BroachingType FSC 5307

Fasteners, Blind, High Strength,Installation Formed, Alloy Steel; General Specifications for FSC 5320
Fasteners, Blind, HighStrength, Installation Formed, Alloy Steel; Design and Usage Limitations forFSC 5320

Fasteners, Blind, High Strength,Installation Formed, Threaded, Self Locking, 100 Degree Flush Head,
450Degree F, Alloy Steel 112 KSI Fus FSC 5320
Fasteners, Blind, HighStrength, Installation Formed, Threaded, Self-Locking, Protruding Head; 450Degrees F,
Alloy Steel, 112 KSI, Fsu FSC 5320
Screws, Machine, Self-Sealing,Integral O-Ring FSC 5305
Bolt, Self-Retaining,Impedance Type FSC 5306
Rivet, Titanium, Bimetal 95KSI Fsu General Specifications for FSC 5320
Rivet, Titanium, Bimetal, 95KSI Fsu, Protruding Head, Type I FSC 5320

Rivet, Titanium, Bimetal 95KSI Fsu 100 Degree Tension Crown Head, Type II FSC 5320

Rivet, Titanium, Bimetal, 95KSI Fsu, 100 Degree Reduced Flush Crown Head, Type III FSC 5320

Nuts (Fasteners), InternallyThreaded, Preload Locking, 450 Degrees F, 800 Degrees F and 1200 Degrees
F,General Specification for FSC 5310
Nut (Fastener), InternallyThreaded, Hexagon, Reduced Height 125 KSI and 200 KSI Ftu, 450 Degrees F
FSC5310
Nut, Preload Locking, ExtendedWasher, Hexagon, Reduced Height, CRES, 125 KSI, 450 Degrees F and
1200Degrees F FSC 5310
Clamp Assembly, Saddle-Type,Cushion, General Specification for FSC 5340
Clamp Assembly, Saddle-Type,Cushioned, NBR Rubber, 321 Cres, 275 Degrees F, Fuel Resistant,
GeneralPurpose FSC 5340
Clamp Assembly, Saddle-Type,Cushioned, EPR Rubber, 321 Cres, 275 Degrees F, General Purpose FSC 5340

Clamp Assembly, Saddle-Type,Cushioned, Silcone Fabric, Reinforced 321 Cres, 500 Degrees F,
GeneralPurpose FSC 5340
Clamp Assembly, Saddle-Type,Cushioned, Ptfe, 321 Cres, -320 Degrees F to 450 Degrees F, General
PurposeFSC 5340
Bolt, Nickel Alloy 718,Tension, High Strength, (125 KSI Fsu and 220 KSI Ftu), High Temperature,Spline
Drive General Specification for FSC 5306
Bits, Screwdriver, RibbedGeneral Specification for FSC 5120
Bit, Screwdriver, RibbedCruciform, Insert Type, External Hexagon Shank, Manually Driven FSC 5120

Bit, Screwdriver, RibbedCruciform, Long Shank, External Hexagon Shank, Power Driven FSC 5120

Bit, Screwdriver, RibbedOffset Cruciform, External Hexagon Shank, Power Driven FSC 5120

Bit, Screwdriver, RibbedOffset Cruciform, Long Shank, External Hexagon Shank FSC 5120

Bit, Screwdriver, Insert Type,Ribbed, Offset Cruciform, External Hexagon Shank, Manually Driven FSC 5120

Nut, Self-Locking, SplineDrive, Assembled Washer, Nickel Alloy 718, 220 KSI Ftu, 900 Degrees F,General
Specification for FSC 5310

Nut, Captive Washer,Self-Locking, Nickel Ally 718, 220 KSI Ftu, 900 Degree (12-Spline) WrenchingElement
FSC 5310
Fastener, Blind, HighStrength, Pull Type, Positive Mechanical Lock, 100 Degree Flush Head, AlloySteel, 112
K.S.I. Fsu FSC 5320
Fastener, Blind, HighStrength, Pull Type, Positive Mechanical Lock, Protruding Head, Alloy Steel,112 K.S.I.
Fsu FSC 5320
Nut, Self-Locking, Steel, 160KSI, 450 Degrees F 12 Point, Captive Washer FSC 5310
Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNC-2A FSC
5305;Revision 1
Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNF-2A FSC
5305;Revision 1
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325

Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325

Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil CoarseThread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil CoarseThread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325

Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil CoarseThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325

Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325

Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil CoarseThread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325

Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil CoarseThread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325

Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325

Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325

Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325

Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325

Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325

Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, Corrosion ResistantSteel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Pin - Spring, CorrosionResistant Steel FSC 5315
Standard for AerodynamicDecelerator and Parachute Drawings
Space Operations and SupportDocumentation
Recommended Practice for PartsManagement
Recommended Practice forAlphanumeric Computer-Output Microforms-Operational Practices for
Inspectionand Quality Control
Glossary of DocumentTechnologies
Silver Recovery Techniques
Standard Recommended Practice-Production, Inspection, and Quality Assurance of First-Generation,
SilverMicroforms of Documents

Standard Test Target for Usein Microfilming Source Document Engineering Graphics on 35 mm
MicrofilmR(1987)
35 mm Planetary Cameras(Top-Light) - Procedures for Determining Illumination Uniformity ofMicrofilming
Engineering Drawings Errata; Amendment 1 - 1998
Standard Recommended Practice- Microrecording of Engineering Source Documents on 35mm Microfilm
Dimensions for Reels Used for16 mm and 35 mm Microfilm
Recommended Practice -Operational Procedures - Inspection and Quality Control of DuplicateMicroforms of
Documents and from COM
Test Procedure for Duplicating35 mm Diazo Microfilm Aperture Cards Addendum - 1996
Code of Standard Practice forSteel Buildings and Bridges
Allowable Stress DesignSpecification for Structural Joints Using ASTM A325 or A490 Bolts
Specification for StructuralSteel Buildings Allowable Stress Design and Plastic Design with Commentary
Test Methods for Air CurtainUnits
Application of Sone Ratingsfor Non-Ducted Air Moving Devices
Application Sound Power LevelRatings for Fans
Application Manual for AirLouvers
Certified Ratings Program forAir Control Devices
(Withdrawn) Photography (Film)- Safety Photographic Film *NOT CURRENT DOCUMENT
(Withdrawn) Dimensions for70-mm Film Magazines and Film for Still-Picture Cameras; (Revised
andRedesignated to ANSI/NAPM IT1.39-1994) *NOT CURRENT DOCUMENT R(1988)
(Withdrawn) Requirements forPhotographic Filing Enclosures for Storing Processed Photographic
Films,Plates, and Papers *NOT CURRENT DOCUMENT
(Withdrawn) 55-Gallon(280-Liter) Tight-Head Universal Steel Drums (DOT-17E, UFC-Rule 40, NMFC-Item
260) *NOT CURRENT DOCUMENT
(Withdrawn) 55-Gallon(280-Liter) Tight-Head Universal Steel Drums (DOT-5B) *NOT CURRENT
DOCUMENT
(Withdrawn) 55-Gallon(280-Liter) Full-Removable-Head Universal Steel Drums (DOT-17H, UFC-Rule
40,NMFC - Item 260) *NOT CURRENT DOCUMENT
(Withdrawn) 16-Gallon(61-Liter) Full-Removable-Head Lug-Cover Universal Steel Drums (UFC-Rule
40,NMFC - Item 260) *NOT CURRENT DOCUMENT
(Withdrawn) 5-Gallon(19-Liter) Tight-Head Universal Steel Drums (DOT-17E, DOT-37B60, UFC-Rule
40,NMFC - Item 260) *NOT CURRENT DOCUMENT
(Withdrawn) 16-Gallon(61-Liter) Full-Removable-Headl Universal Steel Drums (UFC-Rule 40, NMFCItem260) *NOT CURRENT DOCUMENT
(Withdrawn) 5-Gallon(19-Liter) Nesting Lug-Cover Universal Steel Pails (DOT-37A80, DOT-37A60,UFCRule 40, NMFC-Item 260) *NOT CURRENT DOCUMENT
(Withdrawn) Photography(Sensitometry) - Density Measurements - Geometric Conditions for
TransmissionDensity (Revision and Consolidation of ANSI PH2.19- 1976 and PH2
(Withdrawn) Method forDetermining the Speeds of Monochrome Photographic Negative-Films for
AerialPhotography *NOT CURRENT DOCUMENT R(1977)
Photography (Films) - AerialFilms/Spools/Containers - Dimensions Revision, Consolidation, andRedesignation
of ANSI PH1.2-1979; ANSI PH1.10-1981; and ANSI PH1.46- 19
Woodworking Machinery - SafetyRequirements (WMMA O1.1)
Calibration of Microphones,Method for R(1986)

Laboratory StandardMicrophones, Specs. for R(1986)

(Withdrawn) Requirements forRound Metal Motor Oil Cans *NOT CURRENT DOCUMENT
(Withdrawn) 201.5 X 904.5Grease Cartridge *NOT CURRENT DOCUMENT
(Withdrawn) Specifications forRound Composite Motor Oil Cans *NOT CURRENT DOCUMENT
(Withdrawn) Financial Services- Financial Transaction Cards *NOT CURRENT DOCUMENT
(Withdrawn) Machine Tools -Hydraulic Presses - Safety Requirements for Construction, Care, and Use
Warning Symbols - RadiationSymbol
Photography (Sensitometry) -Black-and-White Continuous-Tone Papers - Determination of ISO Speed and
Rangefor Printing R(1989)
Method for Determining Speedof Photographic Negative Materials (Monochrome, Continuous- Tone) R(1986)
Photography - Direct-ExposureMedical and Dental Radiographic Film/Process Combinations - Determination
ofISO Speed and Average Gradient
(Withdrawn) Dimensions ofProjectable Image Area on 16- mm Motion-Picture Film *NOT CURRENT
DOCUMENT
(Withdrawn) Dimensions for35-mm Motion-Picture Film Perforated BH *NOT CURRENT DOCUMENT
(Withdrawn) Dimensions for16-mm Motion-Picture Film Perforated 1R *NOT CURRENT DOCUMENT
(Withdrawn) Dimensions for16-mm Motion-Picture Film Perforated 2R *NOT CURRENT DOCUMENT
(Withdrawn) Dimensions for35-mm Motion-Picture Film Perforated KS *NOT CURRENT DOCUMENT
(Withdrawn) Position,Dimensions and Reproducing Speed of Magnetic Sound Record on 8-mm Type SMotionPicture Film *NOT CURRENT DOCUMENT
Methods for TestingPhotographic Enlargers R(1992)
Methods of Designating andMeasuring Focal Lengths and Focal Distances of Photographic Lenses R(1987)
Shutter Tests forStill-Picture Cameras R(1978)
Method for Testing OpticalPerformance of Slide and Filmstrip Projectors with Built-in Small ScreensR(1988)
Photography - Camera Lenses -Determination of ISO Colour Contribution Index (ISO/CCI)
Definitions, Methods ofTesting, and Specifications for Appearance Imperfections of Optical Elementsand
Assemblies R(1991)
Specification for GeneralPurpose Cards for Information Processing
Eleven-Sixteenths-InchPerforated Paper Tape for Information Interchange R(1995)
Interchange Rolls ofPerforated Tape for Information Interchange R(1995)
Unrecorded Single-DiskCartridge (Front Loading, 2200 bpi), General, Physical, and MagneticRequirements
R(1993)
Programming Language PL/I ISO6160: 1979 R(1993)
Information Systems -Unrecorded Magnetic Tape Cartridge for Information Interchange - 0.250 Inch(6.30
mm), 1600 bpi (63 bpmm), Phase Encoded R(1997)
Unrecorded Eleven-Disk Pack -General, Physical, and Magnetic Requirements R(1995)
Information Systems -Unrecorded Magnetic Tape Cartridge for Information Interchange - 0.250 Inch(6.30
mm), 6400 - 10 000 ftpi (252-394 ftpmm) R(1997)

Information Systems -Helical-Scan Digital Computer Tape Cartridge, for Information Interchange(3.81-mm
(0.150-in) Digital Data Storage (DDS) Recorded Format) R(1997
Information Systems - Helical-ScanDigital Computer Tape Cartridge for Information Interchange (3.81mm(0.150-in) Data/DAT Recorded Format) R(1997)
(Withdrawn) Requirements forElectrical Control for AC High-Voltage Circuit Breakers Rated on aSymmetrical
Current Basis or a Total Current Basis *NOT CURRENT DOCUME
(Withdrawn) Transformers -Pad- Mounted Compartmental- Type, Self-Cooled, Three-Phase
DistributionTransformers for Use with Separable Insulated High- Voltage Connect
Wood Poles - Specificationsand Dimensions
(Withdrawn) Dimensions ofAttachment Plugs and Receptacles for Marine Ship-to-Shore Use for Small
CraftSupplement to C73-1973; *NOT CURRENT DOCUMENT
Safety Requirements for theUse, Care and Protection of Abrasive Wheels Addendum B7.1A - 1995
(Withdrawn) Tracheal TubeConnectors and Adapters; DOCUMENT Correction - January 1982 *NOT
CURRENTDOCUMENT
(Withdrawn) AnestheticEquipment - Oropharyngeal and Nasopharyngeal Airways *NOT CURRENT
DOCUMENT
(Withdrawn) AnestheticEquipment - Tracheal Tubes *NOT CURRENT DOCUMENT
(Withdrawn) Ophthalmics -Prescription Ophthalmic Lenses - Recommendations *NOT CURRENT
DOCUMENT
Commercial Laundry and DrycleaningOperations - Safety Requirements
(Withdrawn) Electric PowerSystems and Equipment - Voltage Ratings (60 Hertz) ANSI/NEMA C84.1-1995
Imaging Materials - ProcessedSilver- Gelatin Type Black- and-White Film - Specifications for
StabilityANSI/ISO 10602-1995
Imaging Materials -Photographic Film and Paper - Determination of Curl ANSI/ISO 4330 -1994
Fundamentals Governing theDesign and Operation of Local Exhaust Systems R(1991)
Surface and Air Vehicles -Unit-Load Heights for Palletized Loads R(1997)
Machine Tools - MechanicalPower Presses - Safety Requirements for Construction, Care, and Use R(1994)
Machine Tools - Power PressBrakes - Safety Requirements for Construction, Care, and Use R(1994)
Machine Tools - Ironworkers -Safety Requirements for Construction, Care, and Use R(1994)
Machine Tools - Lathes -Safety Requirements for Construction, Care, and Use R(1994)
Machine Tools - Drilling,Milling, and Boring Machines - Safety Requirements for Construction, Care,and Use
R(1994)
Safety Requirements for theConstruction, Care, and Use of Grinding Machines R(1987)
Machine Tools - Metal SawingMachines - Safety Requirements for Construction, Care, and Use
Machine Tools - Gear- CuttingMachines - Safety Requirements for Construction, Care, and Use R(1994)
Machine Tools - Single- andMultiple-Spindle Automatic Bar and Chucking Machines - Safety Requirementsfor
Construction, Care, and Use R(1998)
Machine Tools - Pipe, Tube,and Shape Bending Machines - Safety Requirements for Construction, Care,
andUse R(1994)
(Withdrawn) Liquid-in-GlassThermometers - General - Purpose Laboratory Use; Correction-April 1984
*NOTCURRENT DOCUMENT

Ladders - Portable Metal -Safety Requirements

Electrical Power Insulators -Test Methods R(1996)
(Withdrawn) Insulators -Wet-Process Porcelain and Toughened Glass - Suspension Type Still Active,Copyright
Transferred to Nema
Wet Process PorcelainInsulators - Spool Type R(1995)
Wet-Process PorcelainInsulators - Strain Type R(1995)
Wet-Process PorcelainInsulators - Low- and Medium- Voltage Types R(1995)
Wet-Process PorcelainInsulators - Apparatus, Cap and Pin Type R(1995)
Certification - Third-PartyCertification Programs for Products, Processes, and Services Revision of ANSIZ34.1
- 1987
Certification -Self-Certification by Producer or Supplier
AC High-Voltage CircuitBreakers Rated on a Symmetrical Current Basis - Specifications Guide
Distribution Oil Cutouts andFuse Links, Specs. for R(1992)
Specifications for Power Fusesand Fuse Disconnecting Switches R(1992)
Distribution FuseDisconnecting Switches, Fuse Supports, and Current-Limiting Fuses, Specs. forSupplement
C37.47A-1983, Correction-January 1984 R(1992)
(Withdrawn) Switchgear - UnitSubstations - Requirements Still Active, Copyright Transferred to NemaR(1995)
Electrical Analog IndicatingInstruments, Requirements for R(1992)
Requirements for Salient-PoleSynchronous Generators and Generator/Motors for Hydraulic
TurbineApplications R(1989)
Rotating Electrical Machinery- Cylindrical- Rotor Synchronous Generators Supersedes ANSI/IEEE C50.13-77
Transformers - 230 kV andBelow 833/958 Through 8333/10 417 kVA, Single-Phase, and 750/862 Through
60000/ 80 000/100 000 kVA, Three-Phase Without Load Tap Changing;
Conformance Requirements forLiquid-Filled Transformers Used in Unit Installations, Including
UnitSubstations
Terminal Markings andConnections for Distribution and Power Transformers R(1993)
Hazardous Industrial Chemicals- Walk-Behind Mowers and Ride-On Machines with Mowers - Safety
Specifications
Transformers - Pad-Mounted,Compartmental-Type, Self- Cooled, Single-Phase Distribution Transformers
withSeparable Insulated High-Voltage Connectors; High Voltage, 3
Specifications for Shapes andSizes of Grinding Wheels, and for Shapes, Sizes and Identification of
MountedWheels
Specifications for Shapes andSizes of Diamond Grinding Wheels, Hand Hones, and Mounted Wheels
Specifications for the Size ofAbrasive Grain - Grinding Wheels, Polishing and General Industrial Uses
Markings for IdentifyingGrinding Wheels and Other Bonded Abrasives R(1995)
Grading of Certain AbrasiveGrain on Coated Abrasive Products, Specs. for Correction-December 1977
Fluorescent Lamps -Rapid-Start Types - Dimensional and Electrical Characteristics suppC78.1C-1994; Supp
C78.1D-1995; Supp C78.1E-1996; Supp C78.1F-1996; SuppC78.1G
Fluorescent Lamps -Rapid-Start Types - Dimensional and Electrical Characteristics SuppC78.1C-1994; Supp
C78.1D-1995; Supp C78.1E-1996; Supp C78.1F-1996; SuppC78.1G
Fluorescent Lamps -Preheat-Start Types - Dimensional and Electrical Characteristics R(1996)

Fluorescent Lamps -Preheat-Start Types - Dimensional and Electrical Characteristics See NEMA
forSupplements C78.2B-1992; C78.2C-1993; C78.2D-1994; C78.2E-1995; C78.
10W, 13W, 18W, and 26WSingle-Ended Quad Tube Preheat- Start Fluorescent Lamps with Internal Meansof
Starting - Specifications
10W, 13W, 18W, and 26WSingle-Ended Quad Tube Preheat- Start Fluorescent Lamps with Internal Meansof
Starting - Specifications
Fluorescent Lamps -Instant-Start and Cold-Cathode Types - Dimensional and ElectricalCharacteristics R(1996)
Fluorescent Lamps -Instant-Start and Cold-Cathode Types - Dimensional and ElectricalCharacteristics R(1996)
Electric Lamps - 750-Watt,120-Volt Self-Ballasted Mercury Lamps R(1995)
Electric Lamps - 160-Watt120-Volt B87 Self-Ballasted Mercury Lamps R(1995)
Electric Lamps - DNFProjection Lamp R(1995)
Electric Lamps - CBAProjection Lamp R(1995)
Electric Lamps - EJLProjection Lamp R(1995)
Electric Lamps - ELBProjection Lamp R(1995)
Electric Lamps - DDMProjection Lamp R(1994)
Electric Lamps - DEDProjection Lamp R(1994)
(Withdrawn) Electric Lamps -FHS Projection Lamps Still Active, Copyright Transferred to Nema R(1995)
Specifications for FluorescentLamp Starters Correction - May 1972 R(1994)
Aluminum Rigid Conduit - (ARC)
Electrical Lamp Bases PartialRevision and Consolidation of ANSI C81.10-76,C81.20-76,C81.30-76,
C81.4R(1996)
Electrical Lamp Bases R(1996)
Electrical Lamp Bases;Contents, Foreword, and Annexes A and B
Electrical Lamp Bases;Contents, Foreword, and Annexes A and B
Fluorescent Lamp Ballasts -Methods of Measurement R(1995)
Practice for - Occupationaland Educational Eye and Face Protection Supplement ANSI Z87.1A - 1989
Respiratory Protection
Protective Headgear - forMotor Vehicular Users - Specifications
Safety Glazing Materials Usedin Buildings - Safety Performance Specifications and Methods of Test R(1994)
Electric Connectors - SealedInsulated Underground Connector Systems Rated 600 Volts R(1997)

Hazardous Industrial Chemicals- Precautionary Labeling

Galvanized Steel Bolts andNuts for Overhead Line Construction
Zinc-Coated Ferrous GroundRods for Overhead or Underground Line Construction
Roadway Lighting Equipment -Enclosed Side-Mounted Luminaires for Horizontal-Burning High-IntensityDischarge Lamps IEEE C136-1994
Roadway Lighting Equipment -Fiber-Reinforced Plastic (FRP) Lighting Poles IEEE C136-1994
Roadway Lighting - VerticalTenons Used with Post-Top- Mounted Luminaires R(1997)
Hand Tools - Nail Hammers -Safety Requirements
Hand Tools - Heavy StrikingTools - Safety Requirements
Hand Tools - Riveting, Scalingand Tinners' Setting Hammers - Safety Requirements
Carbide Tips for Brazing onTurning Tools Supplement B212.1A 11/12/1990;ANSI/ISO 242:1975 R(1990)
Refuse Collection, Processing,and Disposal Equipment - Mobile Refuse Collection and Compaction Equipment
-Safety Requirements Partial Revision of ANSI Z245.1- 1984
(Withdrawn) PerformanceStandards and Policies for Structural-Use Panels *NOT CURRENT DOCUMENT
Residential & Commercial
Performance Rated Panels
Performance Standards andPolicies for Structural-Use Panels
Specification for Field WeldedTanks for Storage of Production Liquids R(2000)
Specification for Casing andTubing (U.S. Customary Units) Sixth Edition; Effective Date April 15, 1999;Errata
May 1999
Specification for Drill PipeFourth Edition
Specification for Line PipeForty-Second Edition
Specification for PipelineValves (Gate, Ball, and Check Valves) Twenty-First Edition; Supplement 2Effective
June 1, 1998
Manual of PetroleumMeasurement Standards Chapter 19 - Evaporative Loss Measurement Section 1
-Evaporative Loss from Fixed-Roof Tanks Second Edition; Supersedes BULL
Fire Test for Soft-SeatedQuarter-Turn Valves Fourth Edition R(1998)
(Withdrawn) Guide for Controllingthe Lead Hazard Associated with Tank Entry and Cleaning *NOT
CURRENT DOCUMENT
Flanged Steel Pressure ReliefValves
Seat Tightness of PressureRelief Valves
Check Valves: Wafer,Wafer-Lug, and Double Flanged Type Fifth Edition
Valve Inspection and TestingSeventh Edition; Errata August 22,1997
Metal Plug Valves - Flangedand Welding Ends Fourth Edition
Steel Gate Valves - Flangedand Butt-Welding Ends, Bolted and Pressure Seal Bonnets Tenth Edition; ErrataJune 5, 1998
Butterfly Valves: DoubleFlanged, Lug- and Wafer-Type Fifth Edition
Centrifugal Pumps forPetroleum, Heavy Duty Chemical, and Gas Industry Services
Lubrication, Shaft-Sealing,and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and GasIndustry
Services Fourth Edition
Centrifugal Compressors forPetroleum, Chemical, and Gas Service Industries
Reciprocating Compressors for Petroleum,Chemical, and Gas Industry Services

Rotary Type PositiveDisplacement Compressors for Petroleum, Chemical, and Gas Industry ServicesThird
Edition
Welded Steel Tanks for OilStorage Tenth Edition; Addendum 1 March 2000
Packaged, Integrally GearedCentrifugal Air Compressors for Petroleum, Chemical, and Gas IndustryServices
Bottom Loading and VaporRecovery for MC-306 Tank Motor Vehicles Seventh Edition (R 1995)
Welding of Pipelines andRelated Facilities Nineteenth Edition
Pressure Testing of LiquidPetroleum Pipelines Fourth Edition
Aviation Fueling Hose FifthEditon
Installation of UndergroundPetroleum Storage Systems
Venting Atmospheric andLow-Pressure Storage Tanks Nonrefrigerated and Refrigerated Fifth Edition;Errata November 15, 1999
Protection Against IgnitionsArising out of Static, Lightning, and Stray Currents Sixth Edition
Safe Entry and Cleaning ofPetroleum Storage Tanks
Evaporation Loss fromLow-Pressure Tanks (R 1993)
Documentation File for APIPublication 2517 - Evaporation Loss from External Floating-Roof Tanks
Standard Method forMeasurement and Calibration of Horizontal Tanks ASTM D1410 R(1997)
Method for Liquid Calibrationof Tanks ASTM D1406-65 R(1997)
Central Station Air-HandlingUnits
Unitary Air-Conditioning andAir-Source Heat Pump Equipment
Sound Rating of OutdoorUnitary Equipment
Standard for Packaged TerminalAir- Conditioners and Heat Pumps; (CSA C744-93)
Water-Source Heat Pumps
Sound Rating of Non-DuctedIndoor Air-Conditioning Equipment
Commercial and IndustrialUnitary Air-Conditioning Condensing Units
Sound Rating of Large OutdoorRefrigerating and Air- Conditioning Equipment
Forced-Circulation Air-Coolingand Air-Heating Coils
Unit Coolers for Refrigeration
Room Fan-Coils Supersedes440-97
Water-Cooled RefrigerantCondensers, Remote Type
Remote Mechanical-DraftAir-Cooled Refrigerant Condensers
Refrigerant Liquid Receivers
Positive DisplacementCondensing Units
Water Chilling Packages Usingthe Vapor Compression Cycle Addeneum June : 1999 with White Paper;
Supersedes550-92, and 590-92, and all Addendum
Absorption Water Chilling andWater Heating Packages
Method of Measuring MachinerySound Within an Equipment Space
Central System Humidifiers forResidential Applications
Liquid-Line Driers
Thermostatic RefrigerantExpansion Valves
Solenoid Valves for Use withVolatile Refrigerants

Automatic CommercialIce-Makers
Commercial and Industrial AirFilter Equipment
Air Terminals Supersedes ARIStandard 880-94
Method for Measuring theIntelligibility of Speech over Communication Systems ASA 85-1989 R(1999)
(Withdrawn) Method forMeasurement of Real-Ear Protection of Hearing Protectors and PhysicalAttenuation of
Ear Muffs ASA 1 R(1990)
Specification for Sound LevelMeters Amendment S1.4A- 1985 ASA 47 R(1997)
Preferred Frequencies, FrequencyLevels, and Band Numbers for Acoustical Measurements ASA 53 R(1997)
Reference Quantities forAcoustical Levels ASA 84-1989 R(1997)
Specification for Octave-Bandand Fractional-Octave- Band Analog and Digital Filters ASA 65-1986 R(1998)
Measurement of Sound PressureLevels in Air ASA 118 1995 R(1999)
Specification for AcousticalCalibrators ASA 40-1984 R(1997)
Maximum Permissible AmbientNoise Levels for Audiometric Test Rooms ASA 99
Mechanical Coupler forMeasurement of Bone Vibrators ASA 74-1987 R(1997)
Methods for Measuring theReal-Ear Attenuation of Hearing Protectors
Engineering Methods for theDetermination of Sound Power Levels of Noise Sources in a SpecialReverberation
Test Room ASA 91 R(1997)
Safety Code for MechanicalRefrigeration Addendum 15b:02-2001; 15c-2000; 15d-2000; Errata
12/05/1994;Interpretation IC 15-1994-11: 10/20/2000
Method of Testing for RatingRoom Air Conditioners and Packaged Terminal Air Conditioners R(1999)
Method of Testing Capacity ofThermostatic Refrigerant Expansion Valves
Method of Testing for RatingRemote Mechanical-Draft Air-Cooled Refrigerant Condensers
Methods of Testing for RatingPositive Displacement Refrigerant Compressors and Condensing Units
Methods of Testing ForcedConvection and Natural Convection Air Coolers for Refrigeration
Methods of Testing AutomaticIce Makers R(1999)
Methods of Testing ForcedCirculation Air Cooling and Air Heating Coils
Methods of Testing for RatingUnitary Air-Conditioning and Heat Pump Equipment
Laboratory Methods of TestingFans for Rating AMCA Standard 210-85; Interpretation IC 51-1999-02
Gravimetric and Dust-SpotProcedures for Testing Air- Cleaning Devices Used in General Ventilation
forRemoving Particulate Matter
Laboratory Method of TestingIn-Duct Sound Power Measurement Procedure for Fans AMCA 330-86
Energy Conservation in NewBuilding Design This Publication Includes the Following Sections:
(1)ANSI/ASHRAE/IES 90A-1980, (2) ASHRAE/IES 90B-1975, (3) ASHRAE 90C-197
Methods of Testing for RatingSeasonal Efficiency of Unitary Air Conditioners and Heat Pumps
BPVC SECTION I Rules forConstruction of Power Boilers Non-Interfiled (Boiler and Pressure VesselCodes)
BPVC SECTION I 1999 Addenda,Rules for Construction of Power Boilers Non-Interfiled
Codes, Standards, andSpecifications Referenced in Text

Data Report Forms and Guides

Index
Introduction

Appendix I - MandatoryPreparation of Technical Inquiries to the Boiler and Pressure VesselCommittee

Interfiled
Appendix A Explanation of theCode Containing Matter Not Mandatory Unless Specifically Referred to in
theRules of the Code
Part PB Requirements forBoilers Fabricated by Brazing Interfiled
Part PEB Requirements forElectric Boilers
Part PFH Optional Requirementsfor Feedwater Heater (When Located within Scope of Section I
Rules)Interfiled
Part PFT Requirements forFiretube Boilers
Part PG General Requirementsfor All Methods of Construction
Part PMB Requirements forMiniature Boilers
Part PR Requirements forBoilers Fabricated by Riveting Interfiled
Part PVG Requirements forOrganic Fluid Vaporizers Interfiled
Part PW Requirements forBoilers Fabricated by Welding
Part PWT Requirements forWatertube Boilers
SI Units Interfiled
BPVC SECTION IV Rules forConstruction of Heating Boilers Non-Interfiled (Boiler and Pressure
VesselCodes)
BPVC SECTION IV 1999 Addenda,Rules for Construction of Heating Boilers Non-Interfiled (Boiler and
PressureVessel Codes)
Index
INTRODUCTION

Appendix A Approval of NewMaterials Under the ASME Boiler and Pressure Vessel Code
Appendix B Method of CheckingSafety Valve and Safety Relief Valve Capacity by Measuring Maximum
Amount ofFuel That Can Be Burned
Appendix C Examples of Methodof Calculating a Welded Ring Reinforced Furnace
Appendix D Examples of Methodsof Computation of Openings in Boiler Shells
Appendix E Terminology
Appendix F Quality ControlSystem
Appendix H List ofAbbreviations and Addresses
Appendix I Specification forTest Method for Water Absorption of Plastics ASTM D 570-81 Reapproved 1988
Appendix K Guide toInformation Appearing on Certificate of Authorization
Appendix L Guide toManufacturer's Data Report Forms
Introduction

SI Units
Unified Inch Screw Threads (UNand UNR Thread Form)
Gages and Gaging for UnifiedInch Screw Threads Errata May 1992 R(1991)
Screw Thread Gaging Systemsfor Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR,
UNJ,M, and MJ) Errata - 1994
Acme Screw Threads
Nomenclature, Definitions, andLetter Symbols for Screw Threads Revision of ANSI B1.7-1977 R(1992)
Stub Acme Screw ThreadsR(1994)
Buttress Inch Screw Threads 7Degrees/45 Degrees Form with 0.6 Pitch Basic Height of Thread
EngagementR(1992)
Class 5 Interference-FitThread R(1998)
Metric Screw Threads - MProfile
Gages and Gaging for Metric MScrew Threads Revision of ANSI B1.16-1972 R(1992)
Pipe Threads, General Purpose(Inch) Revision and Redesignation of ASME/ANSI B2.1-1968 R(1992)
Dryseal Pipe Threads (Inch)Revision and Redesignation of B2.2-1968 R(1998)
Gaging for Dryseal PipeThreads (Inch) R(1998)
Hose Coupling Screw Threads(Inch) R(1998)

Metric Screw Threads: MJProfile

Gages and Gaging for MJ SeriesMetric Screw Threads Revision of ANSI B1.22-1978 R(1992)
Controls and Safety Devicesfor Automatically Fired Boilers
Interpretations to CSD-1-1998Controls and Safety Devices for Automatically Fired Boilers

Addenda to CSD-1-1998 Controlsand Safety Devices for Automatically Fired Boilers Errata - May 2000
Pallets, Slip Sheets, andOther Bases for Unit Loads Supersedes MH1.1.2, MH1.4.1M, MH1.6, and MH1.7M
Pallet Sizes Revision of ANSIMH1.2.2-1975
Wood Pallets
Addenda to MH1 - 1997 Pallets,Slip Sheets, and Other Bases for Unit Loads
Standard for the Qualificationof Elevator Inspectors R(2000)
Appendix 1 - MandatoryPreparation of Technical Inquiries to the Boiler and Pressure VesselCommittee
Article 1 General
Article 1 General
Article 1 Scope and ServiceRestrictions
Article 1 General
Interpretations Volume 42

BPVC SECTION VIII Rules forConstruction of Pressure Vessels DIVISION 1 Non-Interfiled (Boiler
andPressure Vessel Codes)
Addenda to B18.13-1996 Screwand Washer Assemblies - Sems (Inch Series)
Performance Standard for HandChain Manually Operated Chain Hoists
Appendix 2 - Mandatory Codes,Standards, and Specifications Referenced in Text
Article 2 MaterialRequirements
Article 2 MaterialRequirements

Article 2 MaterialRequirements
Article 2 MaterialRequirements
(Withdrawn) Safety and ReliefValves (Performance Test Codes)
Appendix 3 - MandatoryAdhesive Attachment of Nameplates to Casing
Article 3 Design
Article 3 Design Stresses andMinimum Thicknesses
Article 3 Design
Article 3 Design
Preferred Limits and Fits forCylindrical Parts R(1999)
Performance Standard forOverhead Electric Wire Rope Hoists
Fire Steam Generators Revisionof ASME PTC 4.1- 1964(R1991) (Performance Test Codes)
Appendix 4 - MandatoryAlternative Specification for Plates and Bars in Lieu of SA-36 for FlatPlates and Bars
Article 4 Tests
Article 4 General Requirements

Article 4 Pressure RelievingDevices

Article 4 Design of Weldments
Interpretations to B56.1-1993Safety Standard for Low Lift and High Lift Trucks

T-Slots, Their Bolts, Nuts,and Tongues Revision of ANSI B5.1-1975; Should Be Used Instead of ANSI
B5.1.Which Was Cancelled in 1985 R(1998)
Chucks and Chuck Jaws R(1994)
Spindle Noses for Tool RoomLathes, Engine Lathes, Turret Lathes, and Automatic Lathes R(1998)
Machine Tapers
Accuracy of Engine and ToolRoom Lathes One of a Series of Standards for Small Tools and Machine
ToolElements R(1992)
Spindle Noses and Tool Shanksfor Milling Machines R(1998)
Machine MountingSpecifications for Abrasive Discs and Plate Mounted Wheels Errata - October1985 R(1994)
Spindle Noses and Tool Shanksfor Horizontal Boring Machines R(1991)

Milling Machines R(1998)

Cutter and Tool GrindingMachines R(1994)
Methods for PerformanceEvaluation of Computer Numerically Controlled Machining Centers Errata 1993R(1998)
Performance Standard for AirChain Hoists
Appendix 5 - Mandatory VacuumBoilers
Article 5 Quality Control andInspection
Article 5 MaterialRequirements

Article 5 Tests, Inspection,and Stamping

Article 5 Tests
Performance Standard for AirWire Rope Hoists
Article 6 Welding Processesand Qualifications

Article 6 Instruments,Fittings, and Controls

Article 6 Inspection andStamping
Article 7 Design of Weldments

Article 7 InstallationRequirements
Article 7 Controls
Article 8 FabricationRequirements

Article 8 InstallationRequirements
Displacement Compressors,Vacuum Pumps and Blowers Erratum - 1972 (Performance Test Codes) R(1997)
Article 9 Inspection

Performance Test Code onCompressors and Exhausters (Performance Test Codes)

Article 10 GeneralRequirements

Letter Symbols andAbbreviations for Quantities Used in Acoustics Revision of ASA Y10.11-53
Stainless Steel PlumbingFixtures (Designed for Residential Use)
Article 11 MaterialRequirements

Article 12 Brazing Processes,Procedures, and Qualifications

Scheme for the Identificationof Piping Systems Erratum - September 1998

Article 13 Design

Article 14 FabricationRequirements

Decimal Inch Drawing SheetSize and Format

Metric Drawing Sheet Size andFormat
Line Conventions and LetteringR(1998)
Multiview and Sectional ViewDrawings Revision of ANSI Y14.3 - 1975 R(1999)
Pictorial Drawing R(1999)
Mathematical Definition ofDimensioning and Tolerancing Principles R(1999)
Dimensioning and TolerancingR(1999)
Screw Thread RepresentationR(1998)
Gear Drawing Standards - Part1 for Spur, Helical, Double Helical and Rack Partial Revision of Y14.758R(1998)
Gear and Spline DrawingStandards Part 2 - Bevel and Hypoid Gears R(1999)
Castings and Forgings
Mechanical SpringRepresentation R(1998)
Types and Applications ofEngineering Drawings Revision of ASME Y14.24M-1989
Chassis Frames - Passenger Carand Light Truck - Ground Vechicle Practices R(1999)

Associated Lists
Revision of EngineeringDrawings and Associated Documents
Surface Texture Symbols
Abbreviations and AcronymsRevision and Redesignation of ASME Y1.1-1989
Engineering Drawing Practices
Safety Standard for MechanicalPower Transmission Apparatus
Article 15 Inspection andStamping

Cast Iron Pipe Flanges andFlanged Fittings Classes 25, 125, and 250
Malleable Iron ThreadedFittings Classes 150 and 300
Gray Iron Threaded Fittings -Classes 125 and 250
Interpretations to B16.4-1998- Gray Iron Threaded Fittings - Classes 125 and 250

Pipe Flanges and FlangedFittings NPS 1/2 Through NPS 24

Interpretations to B16.5-1996Pipe Flanges and Flanged Fittings Includes Interpretation No. 3

Addenda to B16.5-1996 PipeFlanges and Flanged Fittings NPS 1/2 Through NPS 24
Factory-Made Wrought SteelButtwelding Fittings
Interpretations to B16.9-1993Factory-Made Wrought Steel Buttwelding Fittings Includes Interpretation No. 1

Face-to-Face and End-to-EndDimensions of Valves

Forged Fittings,Socket-Welding and Threaded
Cast Iron Threaded DrainageFittings
Ferrous Pipe Plugs, Bushings,and Locknuts with Pipe Threads
Cast Bronze Threaded FittingsClasses 125 and 250 R(1994)
Interpretations to B16.5-1985Cast Bronze Threaded Fittings Classes 125 and 250 Includes InterpretationsNo. 1

Cast Copper Alloy Solder JointPressure Fittings R(1994)

Metallic Gaskets for PipeFlanges Ring-Joint, Spiral- Wound, and Jacketed
Addenda to B16.20-1998Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed
Nonmetallic Flat Gaskets forPipe Flanges Revision of ANSI B16.21-1978
Wrought Copper and CopperAlloy Solder Joint Pressure Fittings
Addenda to B16.22-1995 WroughtCopper and Copper Alloy Solder Joint Pressure Fittings

Cast Copper Alloy Solder JointDrainage Fittings - DWV Errata - January 1994
Cast Copper Alloy Pipe Flangesand Flanged Fittings Class 150, 300, 400, 600, 900, 1500, and 2500 Errata
-1991 R(1998)
Buttwelding Ends
Interpretations to B16.25-1997Buttwelding Ends Includes Interpretation No. 1

Cast Copper Alloy Fittings forFlared Copper Tubes

Wrought Copper and WroughtCopper Alloy Solder Joint Drainage Fittings - DWV
Manually Operated Metallic GasValves for Use in Gas Piping Systems up to 125 psig (Sizes 1/2 Through 2)
Valves - Flanged, Threaded,and Welding End
Interpretations to B16.34-1996Valves - Flanged, Threaded, and Welding End Includes Interpretation No. 2

Addenda to B16.34-1996 Valves- Flanged, Threaded, and Welding End

Orifice Flanges
Interpretations to B16.36-1996Orifice Flanges

Large Metallic Valves for GasDistribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum) R(1994)
Malleable Iron Threaded PipeUnions Classes 150, 250, and 300
Manually OperatedThermoplastic Gas Shutoffs and Valves in Gas Distribution Systems R(1994)
Safety Code for Elevators andEscalators
Keys and Keyseats R(1998)
Woodruff Keys and KeyseatsRevision of USAS B17F-1930 R(1998)
Small Solid Rivets 7/16 InchNominal Diameter and Smaller Revision of B18.1-1965 R(1995)
Large Rivets 1/2 Inch NominalDiameter and Larger Revision of B18.4-1960 R(1995)
Metric Small Solid Rivets 12mm Nominal Diameter and Smaller Errata - October 1985 R(1995)
Square and Hex Bolts andScrews (Inch Series)
Addenda to ASME B18.2.1-1996Square and Hex Bolts and Screws (Inch Series)
Square and Hex Nuts (InchSeries) R(1999)
Metric Hex Cap Screws
Metric Formed Hex ScrewsErrata - December 1980 R(1995)
Metric Heavy Hex Screws Errata- April 1981 R(1995)
Metric Hex Flange ScrewsR(1995)

Metric Hex Bolts Errata - May1981 R(1995)

Metric Heavy Hex Bolts Errata- April 1981 R(1995)
Metric Heavy Hex StructuralBolts Errata - April 1981 R(1995)
Metric Hex Lag Screws R(1999)
Metric Heavy Hex Flange ScrewsR(1995)
Metric Hex Nuts, Style 2Errata - January 1982 R(1995)
Metric Slotted Hex Nuts Errata- May 1981 R(1995)
Metric Hex Flange Nuts R(1999)
Metric Hex Jam Nuts Errata -May 1981 R(1998)
Metric Heavy Hex Nuts Errata -April 1981 R(1998)
Socket Cap, Shoulder, and SetScrews, Hex and Spline Keys (Inch Series)
Socket Head Cap Screws (MetricSeries) R(1993)
Metric Series Hexagon Keys andBits R(1998)
Hexagon Socket Head ShoulderScrews (Metric Series) R(1993)
Hexagon Socket Button Head CapScrews (Metric Series) R(1993)
Hexagon Socket FlatCountersunk Head Cap Screws (Metric Series) R(1993)
Metric Series Socket SetScrews R(1993)
Round Head Bolts (Inch Series)R(1998)
Metric Round Head Short SquareNeck Bolts
Metric Round Head Square NeckBolts R(2000)
Wood Screws (Inch Series)R(1997)
Slotted Head Cap Screws,Square Head Set Screws, and Slotted Headless Set Screws (Inch Series)
Machine Screws and MachineScrew Nuts
Thread Forming and ThreadCutting Tapping Screws and Metallic Drive Screws (Inch Series)
Metric Thread-Forming andThread-Cutting Tapping Screws 2000 Edition; Revision of ANSI/ASME
B18.6.5M-1986(R1993)

Metric Machine Screws 2000Edition; Revision of ASME B18.6.7M-1985(1993)

General Purpose Semi-TubularRivets, Full Tubular Rivets, Split Rivets and Rivet Caps R(1992)
Metric General PurposeSemi-Tubular Rivets R(2000)
Clevis Pins and Cotter Pins(Inch Series) Errata - April 1995 R(2000)
Plow Bolts (Inch Series)
Track Bolts and Nuts R(2000)
Miniature Screws R(1992)
Glossary of Terms forMechanical Fasteners R(1991)
Screw and Washer Assemblies -Sems (Inch Series)
Screw and Washer Assemblies -Sems (Metric Series)
Forged Eyebolts R(1995)
Mechanical and PerformanceRequirements for Prevailing- Torque Type Steel Metric Hex Nuts and Hex
FlangeNuts Errata - December 1980 R(1995)
Torque-Tension TestRequirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex FlangeNuts
R(1995)
Dimensional Requirements forPrevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts
Inspection and QualityAssurance for General Purpose Fasteners R(1999)
Inspection and QualityAssurance for High-Volume Machine Assembly Fasteners R(1999)
Supplement of ASMEB18.18.2m-1987 Inspection and Quality Assurance for High-Volume MachineAssembly
Fasteners

Inspection and Quality Assurancefor Special Purpose Fasteners R(1999)

Inspection and QualityAssurance for Fasteners for Highly Specialized Engineered ApplicationsR(1999)
Lock Washers (Inch Series)
Lock Washers (Metric Series)
Plain Washers Reaffirmationand Redesignation of ASA B27.2-1965 R(1998)
Metric Plain Washers R(2000)
Part Identifying Number (PIN)Code System Standard for B18 Externally Threaded Products
Part Identifying Number (PIN)Code System Standard for B18 Internally Threaded Products

Part Identifying Number (PIN)Code System Standard for B18 Nonthreaded Products
Application Part II of FluidMeters (Performance Test Codes)
Steam and Water Sampling,Conditioning, and Analysis in the Power Cycle (Performance Test Codes)
Atmospheric Water CoolingEquipment (Performance Test Codes) R(1997)
Speed-Governing Systems forInternal Combustion Engine- Generator Units (Performance Test Codes)
General Purpose Uniform CrossSection Spiral Retaining Rings R(1999)
General Purpose Tapered andReduced Cross Section Retaining Rings R(1999)
General Purpose Metric Taperedand Reduced Cross Section Retaining Rings Type 3DM1 - Heavy Duty
ExternalRings Type 3EM1 - Reinforced "E" Rings Type 3FM1 - "C"Type R
Precision Power TransmissionRoller Chains, Attachments, and Sprockets R(1999)
"H" Type MillChains, Attachments, and Sprocket Teeth
700 Class Welded Steel andCast Chains, Attachments and Sprockets for Water and Sewage Treatment Plants
Slings Safety Standard forCableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings FSC 3940;Should Be
Used Instead of MIL-S-52432A
Hooks
Interpretations to B30.10-1993Hooks

Monorails and Underhung Cranes

Addenda to B30.11 - 1998Monorails and Underhung Cranes
Overhead Hoists (Underhung)
Interpretations to B30.16-1998Overhead Hoists (Underhung)

Cases No. 25 to B31.1 PowerPiping

Cases No. 26 to B31.1 PowerPiping

Power Piping
Interpretations to B31.1-1998Power Piping Includes Interpretation No. 31

Addenda to B31.1-1998 PowerPiping

Addenda to B31.1-1998 EditionPower Piping
Process Piping

Addenda to Process Piping

Pipeline TransportationSystems for Liquid Hydrocarbons and other Liquids
Refrigeration Piping Errata -1993
Gas Transmission andDistribution Piping Systems
Building Services Piping
Interpretations to B31.9-1996Building Services Piping Includes Interpretation No. 1

Preferred Metric Sizes forFlat Metal Products R(1994)

Preferred Metric Sizes forRound, Square, Rectangle and Hexagon Metal Products Revision of ANSIB32.41977 R(1994)
Preferred Metric Sizes forTubular Metal Products Other Than Pipe Errata - 1996 R(1994)
Preferred Metric Equivalentsof Inch Sizes for Tubular Metal Products Other Than Pipe Revision of ANSIB32.6
- 1977 R(1994)
Graphic Symbols for PlumbingFixtures for Diagrams Used in Architecture and Building Construction
Revisionof ANSI Y32.4-54 R(1999)
Graphic Symbols for FluidPower Diagrams R(1999)
Welded and Seamless WroughtSteel Pipe
Interpretations Volume 42
Interpretations Volume 42
Interpretations Volume 43
Interpretations Volume 43
Interpretations Volume 44
Interpretations Volume 44
Surface Texture (SurfaceRoughness, Waviness, and Lay)
Gage Blanks Revision ofANSI/ASME B47.1AM-1982 R(1999)
Safety Standard for Low Liftand High Lift Trucks
Load Handling Symbols forPowered Industrial Trucks Special Notice - October 1993 R(2000)
Hook-Type Forks and ForkCarriers for Powered Industrial Forklift Trucks Special Notice - February1993
R(2000)
Specification for HorizontalEnd Suction Centrifugal Pumps for Chemical Process Errata - August 1992R(1999)
Measurement ofOut-Of-Roundness R(1997)
Reamers
Knurling R(1995)

Milling Cutters and End Mills

Specifications for Band SawBlades (Metal Cutting)
Specifications for Hole Saws,Hole Saw Arbors, and Hole Saw Accessories
1998 Addenda Summary ofChanges
Addenda 1998 Summary ofChanges
1999 Addenda Summary ofChanges
Addenda 1999 Summary ofChanges
Socket Wrenches, Hand (InchSeries)
Socket Wrenches, Extensions,Adaptors, and Universal Joints, Power Drive (Impact) (Inch Series)
Driving and Spindle Ends forPortable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded)
Socket Wrenches, Hand (MetricSeries)
Wrenches, Box, Angled, OpenEnd, Combination, Flare Nut, and Tappet (Inch Series)
Adjustable Wrenches
Handles and Attachments forHand Socket Wrenches - Inch and Metric Series
Pliers, Diagonal Cutting, andNippers, End Cutting
Hand Torque Tools
Flat Tip and PhillipsScrewdrivers
Shears (Metal Cutting, Hand)
Gages, Wrench Openings,Reference
Pliers, Retaining Ring R(1998)
Pliers (Lineman's, IronWorker's, Gas, Glass, Fence, and Battery)
Wrench, Crowfoot Attachments(Inch Series)
Pliers, Multiple Position,Adjustable
Floor-Affixed Supports forOff-the-Floor Plumbing Fixtures for Public Use

Backwater Valves R(1998)

Plumbing Fixture Fittings
Enameled Cast Iron PlumbingFixtures Errata - November 1996; Supplement 2 - June 2000 R(1999)
Vitreous China PlumbingFixtures Supplement 1 - June 2000
Porcelain Enameled FormedSteel Plumbing Fixtures Errata - November 1996; Supplement 1 1998;Supplement 2 - June 2000 R(1999)
Trim for Water-Closet Bowls,Tanks, and Urinals
Floor Drains R(1998)
Roof Drains Revision of ANSIA112.21.2-1971
Cleanouts R(1998)
Sampling Procedures and Tablesfor Inspection by Attributes
Quality Management and QualityAssurance - Vocabulary ISO 8402:1994; ASQ A8402-1994 is a Revision
andRedesignation of ASQ A3-1987
Quality Management and QualityAssurance Standards - Guidelines for Selection and Use Supersedes Q901987
Quality Management Systems -Requirements
Quality Systems - Model forQuality Assurance in Production, Installation, and Servicing Supersedes Q92-1987
Quality Systems - Model forQuality Assurance in Final Inspection and Test Supersedes Q93-1987
Quality Management and QualitySystem Elements - Guidelines; Supersedes Q94-1987
Safety Requirements for FixedLadders
Safety Requirements forPersonal Fall Arrest Systems
Performance Requirements forPipe Applied Atmospheric Type Vacuum Breakers
Performance Requirements forWater Pressure Reducing Valves; Errata 12/20/93
Performance Requirements forCommercial Food Waste Grinder Units
Performance Requirements forWater Hammer Arresters
Performance Requirements forVacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type
Performance Requirements forPressure Vacuum Breaker Assembly (Recommended for Outdoor Usage)
Performance Requirements forPressurized Flushing Devices (Flushometers) for Plumbing Fixtures
Standard Specification forHard-Drawn Copper Wire
Standard Specification forASTM Thermometers E1
Standard Specification forSteel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
Standard Specification forSoft or Annealed Copper Wire
Standard Practices for ForceVerification of Testing Machines AASHTO No: T67

Standard Specification forCarbon Steel Tee Rails

Standard Test Method forBrinell Hardness of Metallic Materials AASHTO No. T70-86
Standard Specification forWire Cloth and Sieves for Testing Purposes
Standard Specification forCarbon Steel Girder Rails of Plain, Grooved, and Guard Types R(1997)
Standard Specification forMedium-Hard-Drawn Copper Wire
Standard Test Methods forNotched Bar Impact Testing of Metallic Materials
Standard Test Method forPyrometric Cone Equivalent (PCE) of Fireclay and High Alumina
RefractoryMaterials
Standard Specification forAluminum-Alloy Sand Castings
(Withdrawn) Standard TestMethods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, andWrought
Iron
Standard Practice forPreparation of Metallographic Specimens
Standard Practice for Makingand Using C-Ring Stress- Corrosion Test Specimens
Standard Specification forClay Drain Tile and Perforated Clay Drain Tile
Standard Test Method forBitumen Content R(1998)
Standard Specification forHeat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and ForgedCarbon
Steel Compromise Joint Bars
Standard Specification forPipe, Steel, Black and Hot- Dipped, Zinc-Coated, Welded and Seamless
Standard Test Method for FlashPoint by Tag Closed Tester
Standard Specification forBuilding Brick (Solid Masonry Units Made from Clay or Shale)
Standard Specification forHigh Conductivity Tough- Pitch Copper Refinery Shapes
Standard Specification forQuicklime for Structural Purposes R(1997)
Standard Test Method forPenetration of Bituminous Materials
Standard Specification forSteel Screw Spikes
Standard Specification forGeneral Requirements for Rolled Structural Steel Bars, Plates, Shapes, andSheet
Piling
Standard Specification forZinc AASHTO No.: M120-77
Standard Test Method for Losson Heating of Oil and Asphaltic Compounds E1; AASHTO No.: T 47 R(2000)
Standard Terminology Relatingto Methods of Mechanical Testing E1-2000
Standard Test Method forFlexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
Standard Terminology Relatingto Metallography
Standard Practice forAtmospheric Environmental Exposure Testing of Nonmetallic Materials
Standard Specification forConcentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
Standard Test Methods forTension Testing of Metallic Materials AASHTO No.: T68
Standard Test Methods forTension Testing of Metallic Materials (Metric)
Standard Specification forUnalloyed Magnesium Ingot and Stick for Remelting
Standard Test Methods ofCompression Testing of Metallic Materials at Room Temperature R(2000)

(Withdrawn) Standard TestMethods for Directional Reflectance Factor, 45-Deg 0-Deg, of Opaque Specimensby
Broad-Band Filter Feflectometry *NOT CURRENT DOCUMENT R(198
Standard for Use of theInternational System of Units (SI): the Modern Metric System Revision
andRedesignation of ANSI/IEEE Std 268-1992 and ASTM E380
Standard Specification forHard-Drawn Copper Alloy Wires for Electric Conductors
Standard Specification forCopper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock (Metric)E12000
Standard Practice forCalculating Sample Size to Estimate, with a Specified Tolerable Error, theAverage for a
Characteristic of a Lot or Process
Standard Specification forDistillation Equipment E1- 2000 R(2000)
Standard Specification forElectric-Resistance-Welded Steel Pipe
Standard Hardness ConversionTables for Metals Relationship Among Brinell Hardness, Vickers Hardness,
RockwellHardness, Superficial Hardness, Knoop Hardness, and Scl
Standard Test Methods ofTesting Small Clear Specimens of Timber E1-2000 R(2000)
Standard Test Methods forFluid Resistance of Gasket Materials
Standard Specification forSteel Castings, High Strength, for Structural Purposes
Standard Specification forCopper Sheet, Strip, Plate, and Rolled Bar
Standard Specification forRope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members,
forElectrical Conductors
Standard Specification forRope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members,
forElectrical Conductors
Standard Specification forCellulosic Fiber Insulating Board R(2001)
Standard Specification forFacing Brick (Solid Masonry Units Made from Clay or Shale)
Standard Practice forInstalling Vitrified Clay Pipe Lines
Standard Specification for RawTung Oil R(1998)
Standard Specification forConcentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
Standard Specification forPiping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and
HighTemperature Service
Standard Specification for Heat-ResistingChromium and Chromium-Nickel Stainless Steel Plate, Sheet, and
Strip forPressure Vessels
Standard Practice forEstablishing Structural Grades and Related Allowable Properties for VisuallyGraded
Lumber E1-2001
Standard Specification forSeamless and Welded Austenitic Stainless Steel Tubing for General Service
Standard Specification forSeamless and Welded Austenitic Stainless Steel Sanitary Tubing
(Withdrawn) StandardDefinitions of Terms Relating to Liquid Penetrant Inspection
Standard Specification forPressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile
StrengthR(2001)
Standard Specification forSpirits of Turpentine
Standard Specification forConcrete Sewer, Storm Drain, and Culvert Pipe
Standard Specification forConcrete Sewer, Storm Drain, and Culvert Pipe (Metric)

Standard Practice forEvaluating Performance Characteristics of Ultrasonic Pulse-Echo Examination

Instrumentsand Systems without the Use of Electronic Measurement In
Standard Test Method forEmbossed Depth of Resilient Floor Coverings
Standard Method of MacroetchTesting Steel Bars, Billets, Blooms, and Forgings
Standard Terminology Relatingto Corrosion and Corrosion Testing
Standard Specification forCreosote-Coal Tar Solution E1-2000 R(2000)
Standard Test Methods forRubber Property-Adhesion to Rigid Substrates
Standard Test Method forKinematic Viscosity of Transparent and Opaque Liquids (the Calculation ofDynamic
Viscosity) IP Designation: 71/1/97; British Standard 2000:
Standard Specification forFree-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines ReplacesASTM
B16M
Standard Terminology forPaint, Related Coatings, Materials, and Applications
Standard Specification forStainless Steel Forgings
Standard Specification forCold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds
andShapes
Standard Specification forHot-Formed Welded and Seamless Carbon Steel Structural Tubing
Standard Specification forPressure Vessel Plates, Carbon Steel, for Moderate- and Lower-TemperatureService
R(2001)
Standard Test Method forSulfate Ion in Water E1-1995 R(1995)
Standard Test Method forDiagonal Tension (Shear) in Masonry Assemblages E1-2001
Standard Specification forCalcium Silicate Block and Pipe Thermal Insulation R(2001)
Standard Specification andTest Methods for Metallic Medical Bone Screws
Standard Test Methods forRockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
Standard Test Method forConsistency of Paints Measuring Kregs Unit (KU) Viscosity Using a Stormer-Type
Viscometer
Standard Test Methods forCompressive Strength of Chemical-Resistant Mortars, Grouts, MonolithicSurfacings,
and Polymer Concretes
Standard Specification forCartridge Brass Sheet, Strip, Plate, Bar, and Disks (Blanks)
Standard Specification forIron Bronze Sintered Bearings (Oil-Impregnated)
Standard Specification forDeformed and Plain Billet- Steel Bars for Concrete Reinforcement AASHTO No.:M
31
Standard Specification forHot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
Standard Specification forAluminum-Alloy Investment Castings
(Withdrawn) Standard Practicefor Design of Molds for Test Specimens of Plastic Molding Materials
*NOTCURRENT DOCUMENT
Standard Specification forHollow Brick (Hollow Masonry Units Made from Clay or Shale)
Standard Test Method for AcidNumber of Petroleum Products by Potentiometric Titration British
Standard4457; IP Designation: 177/96; E1-2001 R(2001)
(Withdrawn) StandardSpecification for Cast Methacrylate Plastic Sheets, Rods, Tubes and Shapes*NOT
CURRENT DOCUMENT
Standard Specification forGeneral Requirements for Steel Plates for Pressure Vessels

Standard Test Methods forApparent Porosity, Water Absorption, Apparent Specific Gravity, and BulkDensity of
Burned Refractory Brick and Shapes by Boiling Water
Standard Test Method forDistillation of Road Tars
(Withdrawn) Standard Practicefor Installation of Storm Windows, Replacement Windows, Multi-Glazing,
StormDoors, and Replacement Doors
Standard Test Method forRubber Deterioration in Carbon - Arc Weathering Apparatus
Standard Specification forEpoxy-Coated Steel Reinforcing Bars

Standard Specification forNaval Brass Rod, Bar, and Shapes

Standard Specification forNaval Brass Rod, Bar, and Shapes (Metric)
Standard Test Methods forElevated Temperature Tension Tests of Metallic Materials R(1998)
(Withdrawn) Standard TestMethods for Rubber Property - Young's Modulus at Normal and
SubnormalTemperatures *NOT CURRENT DOCUMENT R(1989)
Standard Practice forDetermining Resistance of Synthetic Polymeric Materials to Fungi
Standard Practice for SteelCastings, Surface Acceptance Standards, Visual Examination R(2001)
Standard Test Methods forRubber Cements E1-1993 R(1993)
Standard Specification forApplication and Finishing of Gypsum Board
Standard Practice for Use ofthe Tex System to Designate Linear Density of Fibers, Yarn Intermediates,
andYarns
Standard Practice forPreparing Refractory Concrete Specimens by Casting
Standard Practice for AdhesiveBonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter
Panels
Standard Specification forElastomeric Joint Sealants
Standard Specification forBronze Castings for Bridges and Turntables
Standard Practice forDetermining Resistance of Plastics to Bacteria R(1996)
Standard Specification forFilter Units, Air Conditioning: Viscous-Impingement and Dry Types,Replaceable
R(2001)
Standard Test Methods forEstimating the Depth of Decarburization of Steel Specimens
Standard Test Method forDetermining FF Floor Flatness and FL Floor Levelness Numbers R(2001)
Standard Specification forPolyethylene Plastics Extrusion Materials for Wire and Cable
Standard Specification forWhite Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
Standard Test Methods forRelative Permittivity (Dielectric Constant) and Dissipation Factor by
FluidDisplacement Procedures
(Withdrawn) StandardSpecification For Extruded Acrylic Plastic Sheet *NOT CURRENT DOCUMENT
Standard Test Methods forChemical Analysis of Limestone, Quicklime, and Hydrated Lime
Standard Test Method forHydrogen Ion Concentration of Dry Adhesive Films
Standard Specification forRound Timber Piles
Standard Practice forConditioning Leather and Leather Products for Testing
Standard Test Method forMeasurement of Computed Tomography (CT) System Performance R(2001)
Standard Test Method forDetermining Corrosion Preventive Properties of Lubricating Greases

(Withdrawn) Standard TestMethod for Determination of Water in Liquid Petroleum Products by KarlFischer
Reagent
Standard Test Methods forMechanical Fasteners in Wood R(2000)
Standard Test Methods forPhenolic Compounds in Water
Standard Test Method for PeelResistance of Adhesives (T-Peel Test)
Specification for Engineeringand Design Criteria for Rigid Wall Relocatable Structures
Standard Specification forSteel Castings, Carbon, for General Application R(2000)
Standard Classification ofFireclay and High-Alumina Refractory Brick
Standard Specification forGypsum Plasters
Standard Test Methods forSoftening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
Standard Test Methods ofDetecting Susceptibility to Intergranular Corrosion in Wrought, NickelRich,Chromium-Bearing Alloys
Standard Classification Systemfor Rubber Products in Automotive Applications E1-2001; SAE J200
Standard Test Method forDiameter of Wool and Other Animal Fibers by Microprojection R(2001)
Standard Specification forSteel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished,
GeneralRequirements for E1-2000
Standard Specification forRefined Lead R(1997)
Standard Test Method for BulkDensity ("Unit Weight") and Voids in Aggregate AASHTO No.: T19/T19M
Standard Test Methods forSampling and Testing Lac Resins
Standard Practice for UsingSignificant Digits in Test Data to Determine Conformance with
SpecificationsR(1999)
Standard Practice forDetermining Algal Resistance of Plastic Films
(Withdrawn) StandardSpecification for Fiberboard Nail- Base Sheathing *NOT CURRENT DOCUMENT
Standard Specification forCopper Alloys in Ingot Form
(Withdrawn) StandardSpecification for Perforated, Laminated-Wall Bituminized Fiber Pipe forGeneral
Drainage *NOT CURRENT DOCUMENT
(Withdrawn) Forced-ConvectionLaboratory Ovens for Electrical Insulation, Spec, for *NOT CURRENT
DOCUMENT
Standard Test Methods forElectrical Conductivity of Aviation and Distillate Fuels IP Designation:274/99; E12001
(Withdrawn) StandardSpecification for Poly(Vinyl Chloride) (PVC) Plastic Tubing *NOT
CURRENTDOCUMENT
(Withdrawn) Standard Methodsfor Chemical Analysis of Tribasic Lead Phosphosilicate *NOT CURRENT
DOCUMENT
Standard Practice for Makingand Curing Concrete Test Specimens in the Field
(Withdrawn) Standard Practicefor Rubber Seals - Compatibility with Service Fluids *NOT CURRENT
DOCUMENT
Standard Specification forSolder Metal

Standard Specification forSewer and Manhole Brick (Made from Clay or Shale) AASHTO No.: M91-78; E11999R(1999)
Standard Specification forTinned Soft or Annealed Copper Wire for Electrical Purposes
Standard Specification forConcrete Aggregates
(Withdrawn) StandardSpecification for Fabric- Reinforced, Vulcanized Rubber Sheeting for Pond,Canal, and
Reservoir Lining *NOT CURRENT DOCUMENT
Standard Specification forStructural Clay Load- Bearing Wall Tile
Standard Guide for ChemicalAnalysis of White Pigments R(1999)
Standard Test Methods forChemical Analysis of Aluminum and Aluminum-Base Alloys R(1998)
Standard Test Method forExfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum
Alloys(EXCO Test)
(Withdrawn) Standard TestMethod for Water Content of Trichlorotrifluoroethane with Karl FischerReagent
*NOT CURRENT DOCUMENT
(Withdrawn) Standard TestMethod for Sulfur Dioxide in Workplace Atmoshperes (Barium Perchlorate
Method)*NOT CURRENT DOCUMENT R(1984)
Standard Test Method forToughness of Wood-Based Structural Panels R(2000)
Standard Test Methods forWood-Based Structural Panels in Compression R(2000)
Standard Specification for InorganicAggregates for Use in Gypsum Plaster R(2000)
Standard Practice for ThickWall, Ring-Lined, Split Barrel, Drive Sampling of Soils
Standard Specification forCarbon Structural Steel

Standard Specification forBrass Plate, Sheet, Strip, and Rolled Bar

Standard Specification forGypsum Wallboard E1-2000
Standard Test Method forSoftening Point of Bitumen (Ring-and-Ball Apparatus) E1-2000 R(2000)
Standard Test Method forCompressibility and Recovery of Gasket Materials
Standard Specification forGypsum Lath
Standard Test Methods forSealability of Gasket Materials
Standard Test Methods forCreep Relaxation of a Gasket Material
Standard Test Method forCompressive Strength of Cylindrical Concrete Specimens
Standard Test Method forOrganic Impurities in Fine Aggregates for Concrete AASHTO No.: T21
Standard Test Method forElectrical Conductivity of Liquid Hydrocarbons by Precision Meter E1-2001R(2000)
Standard Test Method forDetermination of the Odor of Adhesives
Standard Test Method for ShearStrength of Adhesives Using Pin-and-Collar Specimen
Standard Test Method for GrabBreaking Load and Elongation of Geotextiles R(1996)
Standard Specification forAsphalt Primer Used in Roofing, Dampproofing,and Waterproofing E-1;
AASHTONo.: M116 R(2000)
Standard Specification forSeamless Copper Pipe, Standard Sizes

Standard Test Method forObtaining and Testing Drilled Cores and Sawed Beams of Concrete AASHTO
No.:T24
Standard Specification forSeamless Red Brass Pipe, Standard Sizes
Standard Specification forCoal Tar Primer Used in Roofing, Dampproofing,and Waterproofing 2AASHTO
No.:M121
Standard Test Method forTransverse Compressive Properties of Hoop Wound Polymer Matrix
CompositeCylinders R(2000)
Standard Test Methods forDetermining the Inclusion Content of Steel E1-1998; E2-1999
Standard Specification forFerritic Malleable Iron Castings
Standard Test Method forDetermining Susceptibility to Stress-Corrosion Cracking of 2XXX and
7XXXAluminum Alloy Products
Standard Test Method forStatic Water Absorption of Leather R(2001)
Standard Specification forGray Iron Castings E1-1998
Standard Specification forCopper Rod Drawing Stock for Electrical Purposes E2: October 2000
Standard Practice forSampling, Sample Preparation, Packaging, and Marking of Lime and LimestoneProducts
Standard Test Methods forChemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Ironand
Manganese R(1999)
Standard Practices forApparatus, Reagents, and Safety Considerations for Chemical Analysis ofMetals, Ores,
and Related Materials
Standard Terminology Relatingto Lime and Limestone (as Used by the Industry)
Standard Test Method forDetermination of Copper in Unalloyed Copper by Gravimetry
Standard Specification forConcrete Brick
Standard Practice for SamplingWrought Nonferrous Metals and Alloys for Determination of
ChemicalComposition R(1996)
Standard Specification forStructural Clay Non-Load- Bearing Tile
Standard Specification forGypsum Casting Plaster and Gypsum Molding Plaster
Standard Specification forSteam or Valve Bronze Castings
Standard Specification forGypsum Keene's Cement
Standard Specification forGypsum Keene's Cement
Standard Specification forComposition Bronze or Ounce Metal Castings
Standard Test Methods forChemical Analysis of Copper and Copper Alloys (Photometric Methods) R(1996)
Standard Test Method forResistivity of Metallically Conducting Resistance and Contact MaterialsE1-1995
R(1995)
Standard Specification forBronze Castings for Steam Locomotive Wearing Parts
Standard Specification forSteel Tie Plates, Low- Carbon and High-Carbon-Hot-Worked
Standard Specification for Carand Tender Journal Bearings, Lined

Standard Test Methods forSampling and Testing Brick and Structural Clay Tile AASHTO No.: T 32-70
Standard Specification forSeamless Copper Tube, Bright Annealed
Standard Specification forRolled Zinc E2-2000
Standard Test Methods forFriction Tapes
Standard Test Method forSurface Moisture in Fine Aggregate AASHTO No.: T142 R(2001)
Standard Test Method forDensity of Semi-Solid Bituminous Materials (Pycnometer Method)
Standard Test Method for pH ofAqueous Solutions with the Glass Electrode
Standard Test Method forRelative Density of Solid Pitch and Asphalt (Displacement Method) R(1999)
Standard Test Methods ofConducting Strength Tests of Panels for Building Construction
Standard Specification forCalcium Silicate Brick (Sand-Lime Brick)
Standard Specification forCast Iron Soil Pipe and Fittings AASHTO No.: M263-77
Standard Practice ofCalibration of Force-Measuring Instruments for Verifying the Force Indicationof Testing
Machines
Standard Specification forSeamless Copper Tube
Standard Specification forSeamless Copper Tube (Metric)
Standard Practice for SamplingAggregates AASHTO No. T2
Standard Test Methods forChemical Analysis of Copper- Nickel and Copper-Nickel-Zinc Alloys R(1996)
Standard Specification forReinforced Concrete Culvert, Storm Drain, and Sewer Pipe
Standard Specification forReinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
Standard Test Methods forChemical Analysis of Nickel- Copper Alloys R(1998)
Standard Test Method forInspection and Verification of Thermometers
Standard Specification forTreated Core and Nontreated Core Gypsum Sheathing Board
Standard Specification forZinc Oxide Pigments AASHTO No.: M124 R(1999)
Standard Specification forSteel Wire, Plain, for Concrete Reinforcement AASHTO No.: M 32
Standard Specification for RedLead Pigment E1-1996 R(1996)
Standard Practice forVerification and Classification of Extensometers
Standard Test Method forSurface Burning Characteristics of Building Materials
Standard Practice for ModifiedSalt Spray (Fog) Testing
Standard Specification forZinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings E1-2000
Standard Test Method forDistillation of Petroleum Products at Atmospheric Pressure
Standard Practice for SurfacePreparation and Marking of Metallic Surgical Implants
Standard Test Method forEffect of Organic Impurities in Fine Aggregate on Strength of Mortar E11995R(1995)
Standard Specification forSeamless Copper Water Tube E1-2000
Standard Specification for SeamlessCopper Water Tube (Metric)
Standard Test Method forSoundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
Standard Test Method forSaybolt Viscosity AASHTO No.: T72 R(1999)

Standard Practice for SamplingNonferrous Metals and Alloys in Cast Form for Determination of
ChemicalComposition R(1996)
Standard Test Method forWeight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-AlloyCoatings
R(1999)
Standard Specification forMagnesium-Alloy Sheet and Plate
Standard Specification forLoadbearing Concrete Masonry Units
Standard Test Method forLaboratory Measurement of Airborne Sound Transmission Loss of BuildingPartitions
and Elements
Standard Specification forMagnesium-Alloy Forgings
Standard Specification forMasonry Cement
Standard Test Method forPrecipitation Number of Lubricating Oils
Standard Test Methods forSieve Analysis and Water Content of Refractory Materials R(1999)
Standard Test Method for Flashand Fire Points by Cleveland Open Cup IP Designation: 36/84 (89); AASHTO
No.:T48; DIN 51 376
Standard Test Method forVickers Hardness of Metallic Materials E1-1997; E2-1999; E3-2000 R(1997)
Standard Specification forMagnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings,and
Die Castings
Standard Test Methods forFlash-Point by Pensky- Martens Closed Cup Tester IP Designation: D34/99
Provisional StandardSpecification for Fabricated Shapes and Finished Parts Fabricated fromPolyimide Resins
Should Be Used Instead of MIL-R-46198, Which Was Cancelle
Standard Specification forMagnesium-Alloy Die Castings R(2000)
Standard Specification forReady-Mixed Concrete E1-2001
Standard Test Methods forSaponification Number of Petroleum Products IP Designation: 136S1/98,136S2/99
Standard Test Method for Waterin Petroleum Products and Bituminous Materials by Distillation AASHTO
No.T55; API Designation: MPMS Chapter 10.5; IP Designation: 74/8
Standard Specification forCopper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposesand
Pressure Vessels
Standard Test Methods forWater Vapor Transmission of Materials
Standard Test Method for PourPoint of Petroleum Products IP Designation: 15/95
Standard Specification forCopper-Silicon Alloy Rod, Bar and Shapes
Standard Specification forCalcium Chloride
Standard Specification forCopper-Silicon Alloy Wire for General Applications
Standard Test Method forModulus of Rupture of Dimension Stone R(2000)
Standard Specification forASTM Hydrometers
Standard Specification forLead-Coated Copper Sheet and Strip for Building Construction
Standard Specification forPhosphor Bronze Plate, Sheet, Strip, and Rolled Bar E1-1999

Standard Test Method for RapidIndentation Hardness Testing of Metallic Materials E1-1996 R(1996)
Standard Practice forMaintaining Constant Relative Humidity by Means of Aqueous Solutions R(1996)
Standard Classification Systemfor Nonmetallic Gasket Materials
Standard Specification forMagnesium-Alloy Extruded Bars, Rods, Shapes, Tubes, and Wire
Standard Specification forSteel Bars, Carbon, Cold- Finished, Standard Quality
Standard Specification forAluminum-Alloy Permanent Mold Castings
Standard Test Methods for FireTests of Roof Coverings
Standard Specification forSteel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled E1-2000
Standard Test Method for CompressiveStrength of Hydraulic Cement Mortars (Using 2-in. or (50-mm) Cube
Specimens)
Standard Test Methods forPhysical Testing of Quicklime, Hydrated Lime, and Limestone
Standard Test Method forIndentation Hardness of Metallic Materials by Portable Hardness Testers E1-1998;
E2-1999 R(1997)
Standard Specification forCopper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock E1-2000
Standard Test Method forYoung's Modulus, Tangent Modulus, and Chord Modulus
Standard Test Methods forDetermining Average Grain Size E1-2000
Standard Test Method forReheat Change of Refractory Brick R(1998)
Standard Test Method forDuctility of Bituminous Materials AASHTO No.: T51
Standard Practice forUltrasonic Pulse-Echo Straight- Beam Examination by the Contact Method
Standard Specification forMetallic-Coated, Steel- Woven Wire Fence Fabric
Standard Test Methods forVitrified Ceramic Materials for Electrical Applications R(1999)
Standard Practice forOperating Salt Spray (Fog) Apparatus
Standard Test Method forMaterials Finer Than 75- Micrometers (No. 200) Sieve in Mineral Aggregates
byWashing
Standard Guide for Sampling,Test Methods, Specifications, and Guide for Electrical Insulating Oils
ofPetroleum Origin
Standard Terminology Relatingto Dimension Stone
Standard Test Methods for FireTests of Building Construction and Materials
Standard Test Method for Rateof Grease Penetration of Flexible Barrier Materials (Rapid Method) R(1998)
Standard Test Methods ofFlexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
Standard Specification forRubber Insulating Gloves R(2000)
Standard Test Methods forChemical Analysis of Titanium and Titanium Alloys
Standard Specification forMetallic-Coated Carbon Steel Barbed Wire
Standard Specification forLeaded Brass Plate, Sheet, Strip, and Rolled Bar
Standard Test Method for WaterAbsorption of Slate R(1999)
Standard Specification forCopper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), andCopperNickel Alloy Plate, Sheet, Strip, and Rolled Bar

Standard Specification forZinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
Standard Test Method forLightweight Particles in Aggregate AASHTO No.: T113
Standard Terminology Relatingto Textiles
Standard Specification forCopper and Copper Alloy Forging Rod, Bar, and Shapes
Standard Specification forSteel Springs, Helical, Heat-Treated E1-1996
Standard Terminology Relatingto Concrete and Concrete Aggregates
Standard Reference Photographsfor Magnetic Particle Indications on Ferrous Castings R(1997)
Standard Specification forGray Iron Castings for Valves, Flanges, and Pipe Fittings E1-1998
Standard Specification forCeramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid MasonryUnits
Standard Test Methods forAnalysis of Yellow, Orange, and Green Pigments Containing Lead Chromate
andChromium Oxide Green R(1997)
Standard Test Method forInspection and Verification of Hydrometers R(1998)
Standard Specification forNickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
Standard Test Method forSpecific Gravity and Absorption of Coarse Aggregate R(2001)
Standard Test Method for DropMelting Point of Petroleum Wax Including Petrolatum IP
Designation:133/79(87); TAPPI T 634ts-64 R(1999)
Standard Practice forFabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
Standard Specification forSteel Castings, Austenitic Manganese R(1998)
Standard Test Method forSpecific Gravity and Absorption of Fine Aggregate
Standard Test Methods forAnalysis of Lubricating Grease
Standard Specification forNonloadbearing Concrete Masonry Units
Standard Test Method forSulfur in Petroleum Products (General Bomb Method) British Standard 4454;
IPDesignation: 61/99
Standard Test Method forDetection of Copper Corrosion from Petroleum Products by the Copper StripTarnish
Test IP Designation: 154/93; British Standard 4351; E1- 200
Standard Specification forStructural Steel for Ships
Standard Test Method forResistance to Degradation of Small-Size Coarse Aggregate by Abrasion andImpact in
the Los Angeles Machine
Standard Test Method forPoisson's Ratio at Room Temperature
Standard Test Methods for ColdCrushing Strength and Modulus of Rupture of Refractories
Standard Specification forPipe, Steel, Electric- Fusion (Arc)-Welded (Sizes NPS 16 and over)
Standard Specification forBrass Wire
Standard Specification forSeamless Brass Tube
Standard Specification forSeamless Brass Tube (Metric)
Standard Test Method for TrueSpecific Gravity of Refractory Materials by Water Immersion
Standard Method forMeasurement of Stain Resistance of Anodic Coatings on Aluminum R(1998)

Standard Test Method for SieveAnalysis of Fine and Coarse Aggregates

Standard Test Method forBehavior of Materials in a Vertical Tube Furnace at 750 Degrees C E1-2000
Standard Test Method forMeasurement of Coating Mass per Unit Area on Anodically Coated
AluminumR(2000)
Standard Test Method forFlexibility of Resilient Flooring Materials with Cylindrical MandrelApparatus E11994 R(1994)
Standard Specification forManganese Bronze Rod, Bar and Shapes
Standard Specification forManganese Bronze Rod, Bar and Shapes (Metric)
Standard Test Method for UnitWeight, Yield, and Air Content (Gravimetric) of Concrete AASHTO No.: T121
Standard Specification forWrought 18 Chromium- 14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wirefor
Surgical Implants (UNS S31673)
Standard Specification forElectric-Fusion (Arc)- Welded Steel Pipe (NPS 4 and Over)
Standard Specification forPhosphor Bronze Rod, Bar, and Shapes
Standard Specification forPhosphor Bronze Rod, Bar, and Shapes (Metric)
Standard Specification forConcrete Masonry Units for Construction of Catch Basins and Manholes
Standard Test Methods for ConductingCreep, Creep- Rupture, and Stress-Rupture Tests of Metallic Materials
Standard Specification forCopper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar and Shapes E1,E22000
Standard Test Methods forSampling and Testing Concrete Masonry Units and Related Units
Standard Practice for SamplingBituminous Materials
Standard Specification forHydraulic Hydrated Lime for Structural Purposes
Standard Test Method for ClayLumps and Friable Particles in Aggregates AASHTO No.: T112
Standard Practice forSafeguarding Against Embrittlement of Hot-Dip Galvanized Structural SteelProducts and
Procedure for Detecting Embrittlement R(1999)
Standard Test Method for Slumpof Hydraulic-Cement Concrete
Standard Specification forAggregate for Masonry Mortar AASHTO No.: M45-70(1974)
Standard Specification forGravity-Convection and Forced-Ventilation Ovens E1-1995
Standard Test Methods forSampling and Testing Bitumen- Saturated Felts and Woven Fabrics for Roofingand
Waterproofing
Standard Test Method forFlexibility of Non-Metallic Gasket Materials R(1997)
Standard Specification forAluminum-Bronze Sand Castings E1-2001
Standard Test Methods forPolariscopic Examination of Glass Containers
Standard Test Method forThermal Shock Resistance of Glass Containers R(2000)
Standard Test Method forDielectric Breakdown Voltage and Dielectric Strength of Solid ElectricalInsulating
Materials at Commercial Power Frequencies
Standard Specification forAluminum Bronze Rod, Bar, and Shapes E2-1999
Standard Specification forAluminum Bronze, Rod, Bar, and Shapes (Metric)
Standard Specification forPortland Cement

Standard Test Methods for ACLoss Characteristics and Permittivity (Dielectric Constant) of SolidElectrical
Insulation
Standard Test Method forElectrical Resistance of Conductive Resilient Flooring Reinstated
Standard Specification forCopper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
Standard Test Methods forTension Testing of Nonmetallic Gasket Materials
Standard Specification forZinc Coating (Hot-Dip) on Iron and Steel Hardware AASHTO No.: M232
Standard Test Method forExpansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing E1-1996R(1996)
Standard Test Methods forSpecific Gravity of Pigments E1-1996 R(1996)
Standard Test Method forMercurous Nitrate Test for Copper and Copper Alloys
Standard Test Methods forWater Vapor Retarders Used in Contact with Earth under Concrete Slabs, on Walls,or
as Ground Cover
Standard Reference Radiographsfor Inspection of Aluminum and Magnesium Castings
Standard Test Method for WaterRetention by Concrete Curing Materials
Standard Test Method forSaybolt Color of Petroleum Products (Saybolt Chromometer Method)
Standard Test Method forLength Change of Hardened Hydraulic-Cement Mortar and Concrete
Standard Test Methods forStrength of Glass by Flexure (Determination of Modulus of Rupture) R(2000)
Standard Specification forAutomotive Gray Iron Castings R(1993)
Standard Specification forPhosphor Bronze Wire E1
Standard Specification forVitrified Clay Filter Blocks
Standard Specification forNickel Plate, Sheet, and Strip
Standard Terminology of Glassand Glass Products
Standard Test Method forSurface Flammability of Materials Using a Radiant Heat Energy Source
Standard Specification forSeamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
Standard Specification forNickel-Copper Alloy Rod, Bar, and Wire
Standard Practice forUltrasonic Contact Examination of Weldments
Standard Specification of Nickel-CopperAlloy (UNS N04400) Seamless Pipe and Tube
Standard Test Method forMeasuring Compressive Properties of Thermal Insulations
Standard Specification forNickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025,
andN06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N0661
Standard Specification forStainless and Heat- Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
Standard Specification forNickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025,
andN06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N0661
Standard Test Methods forThickness and Density of Blanket or Batt Thermal Insulations
Standard Practice forGoniophotometry of Objects and Materials
Standard SpecificationNickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025,
andN06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) P
Standard Practices for GeneralTechniques of Infrared Quantitative Analysis
Standard Specification forAluminum Bronze Sheet, Strip, and Rolled Bar

Standard Specification forAluminum Bronze Sheet, Strip, and Rolled Bar (Metric)
Standard Test Methods forChemical Analysis of Soda- Lime and Borosilicate Glass R(2000)
Standard Specification forOxygen-Free Electrolytic Copper - Refinery Shapes
Standard Test Method forCompressive Strength of Dimension Stone R(1999)
Standard Specification forCopper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and HeatExchangers
E1-2001
Standard Specification forSheet Materials for Curing Concrete
Standard Specification forStandard Atmospheres for Conditioning and Testing Flexible Barrier
MaterialsR(1998)
Standard Practice for SamplingFreshly Mixed Concrete
Standard Test Method for AirContent of Freshly Mixed Concrete by the Volumetric Method E1-1995
Standard Specification for Bitumen-SaturatedCotton Fabrics Used in Roofing and Waterproofing
Standard Specification forBunch-Stranded Copper Conductors for Electrical Conductors
Standard Test Method forMeasuring Thickness of Concrete Elements Using Drilled Concrete Cores
AASHTONo.: T 148
Standard Terminology ofMicroscopy E1-2000 R(1999)
Standard Specification forStainless and Heat- Resisting Chromium Steel Plate, Sheet, and Strip
Standard Specification forCopper-Alloy Die Castings
Standard Guide for ChromiumElectroplating on Steel for Engineering Use
Standard Test Method forSteady-State Heat Flux Measurements and Thermal Transmission Properties byMeans
of the Guarded-Hot-Plate Apparatus
Standard Practice for Use ofthe Terms Precision and Bias in ASTM Test Methods R(1996)
Standard Specification forElectric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler
andSuperheater Tubes R(2000)
Standard Specification forAluminum Alloys in Ingot and Molten Forms for Castings from All CastingProcesses
Standard Specification forCarbon Steel Track Bolts and Nuts
Standard Practice forPreparation of Low-Carbon Steel for Electroplating R(1997)
Standard Practice for Samplingand the Amount of Testing of Hydraulic Cement
Standard Specification forWelded Deformed Steel Bar Mats for Concrete Reinforcement
Standard Specification forSteel Welded Wire Fabric, Plain, for Concrete Reinforcement
Standard Test Method for AirContent of Hydraulic Cement Mortar AASHTO No.: T137
Standard Reference Radiographsfor Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings
Standard Specification forCopper Bar, Bus Bar, Rod, and Shapes
Standard Test Method forBurning Quality of Kerosine R(1999)
Standard Specification forSeamless Copper Bus Pipe and Tube
Standard Test Method forDensity of Hydraulic Cement AASHTO No.: T133
Standard Specification forLead-Coated and Lead-Alloy- Coated Soft Copper Wire for Electrical Purposes

Standard Test Method forConradson Carbon Residue of Petroleum Products IP Designation: 13/94;
BritishStandard 4380
Standard Test Method forGuided Bend Test for Ductility of Welds R(1997)
Standard Specification forApparatus for Microdetermination of Carbon and Hydrogen in Organic andOrganoMetallic Compounds E1-2000 R(1999)
Standard Specification forSeamless Carbon Steel Boiler Tubes for High-Pressure Service E1-1996 R(1996)
Standard Practice for Makingand Curing Concrete Test Specimens in the Laboratory
Standard Reference Radiographsfor Investment Steel Castings of Aerospace Applications R(1999)
Standard Specification forAlloy-Steel and Stainless Steel Bolting Materials for High-TemperatureService

Standard Specification forLaboratory Glass Micropipets R(1999)

Standard Specification forCarbon and Alloy Steel Nuts for Bolts for High Pressure or High
TemperatureService, or Both
Standard Specification forMineral Fiber Thermal Insulating Cement
Standard Specification forCopper-Beryllium Alloy Rod and Bar
Standard Specification forCopper-Beryllium Alloy Rod and Bar (Metric)
Standard Specification forExpanded or Exfoliated Vermiculite Thermal Insulating Cement
Standard Practice for GravityLoad Testing of Floors and Low Slope Roofs E1-2000 R(2000)
Standard Specification forCupola Malleable Iron
Standard Specification forCopper-Beryllium Alloy Wire
Standard Specification forMagnesium-Alloy Permanent Mold Castings
Standard Test Method for PierTest for Refractory Mortars R(2000)
Standard Specification forElectrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and FerrousAlloys
R(1999)
Standard Practice forPreparation, Standardization, and Storage of Standard and Reagent Solutionsfor Chemical
Analysis
Standard Practice for TestingChromate Coatings on Zinc and Cadmium Surfaces R(2000)
Standard Test Methods forSampling and Testing Untreated Paper Used for Electrical Insulation
Standard Test Methods forAnalysis of Ethylene Glycols and Propylene Glycols
Standard Specification forPressure Vessel Plates, Alloy Steel, Nickel
Standard Test Methods forBreaking Load and Flexural Properties of Block-Type Thermal Insulation
Standard Test Method for WaterUsing Volumetric Karl Fischer Titration
Standard Specification forPressure Vessel Plates, Alloy Steel, Molybdenum R(1999)
Standard Test Methods forSewing Threads

Standard Specification forCopper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
Standard Specification forFinishing Hydrated Lime R(1997)
Standard Specification forHydrated Lime for Masonry Purposes R(1997)
Standard Practice forPreparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold,Centrifugal,
and Continuous Castings
Standard Test Method forConducting Drop-Weight Test to Determine Nil-Ductility Transition Temperatureof
Ferritic Steels R(2000)
Standard Specification forAluminum and Aluminum-Alloy Sheet and Plate
Standard Specification forAluminum and Aluminum-Alloy Sheet and Plate (Metric)
Standard Test Methods forCellulosic Fiber Insulating Board
Standard Specification forLampblack Pigment E1-1996 R(1996)
Standard Specification forAluminum and Aluminum-Alloy Drawn Seamless Tubes
Standard Specification forAluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)
Standard Test Method forReheat Change of Insulating Firebrick R(1999)
Standard Specification forAluminum and Aluminum-Alloy Bar, Rod, and Wire
Standard Specification forAluminum and Aluminum-Alloy Bar, Rod, and Wire (Metric)
Standard Test Method forApparent Density of Free- Flowing Metal Powders Using the Hall FlowmeterFunnel
R(1995)
Standard Specification forStructural Clay Facing Tile
Standard Test Method for FlowRate of Metal Powders
Standard Specification forElectric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
Standard Test Method for SieveAnalysis of Granular Metal Powders
Standard Practices forSampling Finished Lots of Metal Powders
Standard Test Method forFundamental Transverse, Longitudinal, and Torsional Resonant Frequencies
ofConcrete Specimens E1-1999
Standard Practice forStandardizing Equipment for Electromagnetic Examination of SeamlessAluminum-Alloy
Tube
Standard Specification forSeamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger
Tubes E1-2000; Replaces A200-1994 and A271- 1996
Standard Specification forSteel Castings, Carbon, Suitable for Fusion Welding, for High-TemperatureService
R(1998)
Standard Specification forSteel Castings, Martensitic Stainless and Alloy, for Pressure-ContainingParts,
Suitable for High-Temperature Service
Standard Test Method forWeather Resistance of Slate R(1999)
Standard Test Methods for ConePenetration of Lubricating Grease IP Designation: 50/88
Standard Specification forPearlitic Malleable Iron
Standard Test Method forCalibration of Thermocouples By Comparison Techniques E1-1996 R(1996)
Standard Specification forAluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

Standard Specification forAluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and
Tubes(Metric)
Standard Test Methods forAnalysis of Sulfuric Acid
Standard Specification forSmooth-Surfaced Asphalt Roll Roofing (Organic Felt) R(1996)
Standard Test Methods forAnalysis of Hydrochloric Acid
Standard Test Methods forResistance of Glass Containers to Chemical Attack R(1999)
Standard Specification forAsphalt Shingles (Organic Felt) Surfaced with Mineral Granules
Standard Specification forAir-Entraining Additions for Use in the Manufacture of Air-Entraining
HydraulicCement
Standard Specification forAsphalt-Saturated Organic Felt Used in Roofing and Waterproofing
Standard Specification forSteel Wire, Cold-Drawn for Mechanical Springs
Standard Specification forHard-Drawn Copper-Clad Steel Wire
Standard Test Method forPotential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-BarMethod)
Standard Specification forCoal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
Standard Test Method forOptical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys bythe
Point-To-Plane Technique R(1996)
Standard Specification forSteel Wire, Music Spring Quality
Standard Specification forConcentric-Lay-Stranded Copper-Clad Steel Conductors
Standard Test Method forLinear Thermal Expansion of Solid Materials with a Vitreous SilicaDilatometer
Standard Specification forSteel Wire, Oil-Tempered for Mechanical Springs
Standard Specification forConcentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
Standard Test Methods forRigid Sheet and Plate Materials Used for Electrical Insulation
Standard Specification forSteel Wire, Oil-Tempered Carbon Valve Spring Quality
Standard Specification forAluminum 1350-H19 Wire for Electrical Purposes
Standard Specification forChromium-Vanadium Alloy Steel Spring Wire
Standard Specification forConcentric-Lay-Stranded Aluminum 1350 Conductors
Standard Test Method for AirContent of Freshly Mixed Concrete by the Pressure Method E1-1999
Standard Specification for Chromium-VanadiumAlloy Steel Valve Spring Quality Wire
Standard Test Methods forBleeding of Concrete
Standard Test Method forAir-Entraining Admixtures for Concrete
Standard Test Methods ofSampling and Testing Turpentine

Standard Specification forMineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
Standard Specification forAluminum Bars for Electrical Purposes (Bus Bars)
Standard Specification forAluminum Bars for Electrical Purposes (Bus Bars) (Metric)
Standard Test Method forSteady-State Thermal Performance of Building Assemblies by Means of a
GuardedHot Box E1-1993 R(1993)
Standard Practice for Locatingthe Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel
ArticlesR(1999)
Standard Specification forZinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die
CastingsE1- 2000
Standard Test Method for Heatof Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
Standard Specification forAluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
Standard Test Method forAbrasion Resistance of Stone Subjected to Foot Traffic E1-1997 R(1997)
Standard Specification forHigh-Strength Low-Alloy Structural Steel AASHTO No.: M 161

Standard Specification forMineral Filler for Bituminous Paving Mixtures E1-2001 R(2000)
Standard Practice forElectromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
Standard Test Method forMeasurement of Thickness of Anodic Coatings on Aluminum and of
OtherNonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Ins
Standard Test Methods andPractices for Emulsified Asphalts AASHTO No.: T59
Standard Specification forTinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
Standard Test Method forEvaluating the Microstructure of Graphite in Iron Castings R(1998)
Standard Specification forAluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled
RingForgings
Standard Specification forAluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled
RingForgings (Metric)
Standard Specification forGeneral Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip,and
Rolled Bar
Standard Specification forGeneral Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip,and
Rolled Bar (Metric)
Standard Test Method forDetermination of Manganese in Manganese Ores by Pyrophosphate
ComplexedPermanganate Potentiometric Titration
Standard Specification forWelded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and CondenserTubes
E1-1999
Standard Specification forGeneral Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes
andForgings
Standard Specification forAsphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules R(1996)
Standard Specification forGeneral Requirements for Wrought Copper Alloy Wire
Standard Specification forGeneral Requirements for Wrought Copper-Alloy Wire (Metric)
Standard Specification for GeneralRequirements for Wrought Seamless Copper and Copper-Alloy Tube
Standard Specification forGeneral Requirements for Wrought Seamless Copper and Copper-Alloy
Tube(Metric)

Standard Test Methods forPerformance Characteristics of Metallic Bonded Resistance Strain GagesR(1998)
Standard Specification forWelded and Seamless Steel Pipe Piles E1-2000
Standard Test Method forThickness of Thin Foil and Film by Weighing R(1999)
Standard Guide for Preparationof Aluminum Alloys for Electroplating E1-1999 R(1999)
Standard Specification forCopper-Brazed Steel Tubing
Standard Practice forPreparation of and Electroplating on Stainless Steel R(1998)
Standard Test Methods forDetermining Hardenability of Steel
Standard Test Methods forDetermining the Izod Pendulum Impact Resistance of Plastics
Standard Test Method forChlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
Standard Test Methods for DCResistance or Conductance of Insulating Materials
Standard Test Method forSulfur in Organic Compounds by Sodium Peroxide Bomb Ignition
Standard Specification forStandard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of
SolidRound Wires Used as Electrical Conductors
Standard Test Method for TotalNitrogen in Organic Materials by Modified Kjeldahl Method E1-1996 R(1996)
Standard Specification forAir-Entraining Admixtures for Concrete
Standard Specification forBoiled Linseed Oil E1-1995 R(1995)
Standard Specification forIron Blue Pigment R(1999)
Standard Practices forDetecting Susceptibility to Intergranular Attack in Austenitic StainlessSteels
Standard Specification forCorrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip R(1999)
Standard Test Method forDetermination of Cross- Sectional Area of Stranded Conductors
Standard Specification forChrome Oxide Green Pigment R(1999)
Standard Test Method forMeasuring Fast-Neutron Reaction Rates by Radioactivation of Iron
Standard Specification forStainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip R(1999)
Standard Test Method forMeasuring Fast-Neutron Reaction Rates by Radioactivation of Nickel R(1996)
Standard Specification forNickel and Nickel-Base Alloy-Clad Steel Plate R(1999)
Standard Specification for Titaniumand Titanium Alloy Strip, Sheet, and Plate
Standard Test Method forMeasuring Reaction Rates and Fast-Neutron Fluences by Radioactivation ofSulfur-32
Standard Test Methods forChemical Resistance of Mortars, Grouts, and Monolithic Surfacings and
PolymerConcretes
Standard Specification forSeamless and Welded Ferritic and Martensitic Stainless Steel Tubing forGeneral
Service
Standard Guide for Samplingand Testing Volatile Solvents and Chemical Intermediates for Use in Paint
andRelated Coatings and Material
Standard Specification forMortar for Unit Masonry
Standard Specification forCopper-Base Alloy Centrifugal Castings
Standard Specification for CopperFlat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

Standard Test Method for WaterAbsorption of Core Materials for Structural Sandwich Constructions R(1996)
Standard Reference Radiographsfor High-Strength Copper-Base and Nickel-Copper Alloy Castings
Standard Test Method for ShearProperties of Sandwich Core Materials E1-2000
Standard Practice forUltrasonic Examination of Longitudinal Welded Pipe and Tubing
Standard Test Method forMagnetic Particle Examination of Steel Forgings
Standard Practice forCodification of Certain Nonferrous Metals and Alloys, Cast and Wrought
Standard Specification forStainless Steel Bars and Shapes
Standard Test Method forApparent Porosity in Cemented Carbides R(2000)
Standard Test Methods forIdentification of Fibers in Textiles
Standard Specification forGray Iron Castings for Pressure-Containing Parts for Temperatures up to 650Degrees
F
Standard Specification forGray Iron Castings for Pressure-Containing Parts for Temperatures up to 350Degrees
C E1-1996
Standard Test Methods forBleeding of Pigments R(1997)
Standard Specification forSeamless Copper Tube for Air Conditioning and Refrigeration Field Service E1-2000
Standard Test Methods forHygroscopic Moisture (and Other Matter Volatile under the Test Conditions)
inPigments R(1995)
Standard Reference Radiographsfor Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings
Standard Practice forPreparation of Copper and Copper- Base Alloys for Electroplating andConversion
Coatings R(1995)
Standard Test Method for OilAbsorption of Pigments by Spatula Rub-Out
Standard Test Method for AcidResistance of Porcelain Enamels (Citric Acid Spot Test)
Standard Specification for Lowand Intermediate Tensile Strength Carbon Steel Plates
Standard Specification forCopper and Copper-Alloy Die Forgings (Hot-Pressed)
Standard Test Methods forChemical Analysis of Cuprous Oxide and Copper Pigments R(1999)
Standard Test Method forDetermining Rate of Air Leakage Through Exterior Windows, Curtain Walls,
andDoors Under Specified Pressure Differences Across the Specimen R
Standard Specification forCopper Conductors for Use in Hookup Wire for Electronic Equipment
Standard Terminology Relatingto Porcelain Enamel and Ceramic-Metal Systems
Standard Test Method for APIGravity of Crude Petroleum and Petroleum Products (Hydrometer Method) E12000R(2000)
Standard Specification forLaboratory Glass Volumetric Flasks R(1998)
Standard Specification forTungsten Wire for Electron Devices and Lamps E1-1996 R(1996)
Standard Test Method forPotential Alkali-Silica Reactivity of Aggregates (Chemical Method)
Standard Test Methods for BendTesting of Material for Ductility

Standard Test Methods forChemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide
andPotassium Hydroxide)
Standard Test Method forFlexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
Standard DescriptiveNomenclature for Constituents of Concrete Aggregates
Standard Specification forHigh-Carbon Anti-Friction Bearing Steel
Standard Guide forPetrographic Examination of Aggregates for Concrete
Standard Test Methods forVarnished Cotton Fabrics Used for Electrical Insulation
Standard Test Method forFlatwise Tensile Strength of Sandwich Constructions R(1999)
Standard Test Methods forRubber Products - Chemical Analysis R(1998)
Standard Specification forSilver-Coated Soft or Annealed Copper Wire
Standard Practice for SamplingIndustrial Chemicals R(1996)
Standard Specification forFree-Cutting Copper Rod, Bar, Wire and Shapes
Standard Test Methods forVitrified Clay Pipe
Standard Test Methods forSoluble Cellulose Nitrate R(1999)
Standard Specification forPressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and ManganeseMolybdenum-Nickel E1-1999
Standard Specification forThreadless Copper Pipe, Standard Sizes
Standard Test Method forDensity and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
Standard Test Method forDimensions and Density of Preformed Block and Board - Type Thermal Insulation
Standard Specification forCarbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
Standard Specification forn-Butyl Alcohol (Butanol) R(1999)
Standard Test Method forSolvent-Extractable Material in Black Pigments R(1999)
Standard Specification forCopper Drainage Tube (DWV)
Standard Specification forCarbon Steel Bolts and Studs, 60 000 psi Tensile Strength
Standard Test Method forTensile Strength of Chemical- Resistant Mortar, Grouts, and MonolithicSurfacings
Standard Practice for SamplingPressurized Gas for Gas Analysis E1-1995 R(1995)
Standard Specification forSteel Sheet, Terne (Lead- Tin Alloy) Coated by the Hot-Dip Process
Standard Specification forAluminum-Alloy 6061-T6 Standard Structural Profiles
Standard Practice forComputing the Colors of Objects by Using the CIE System
Standard Test Method forWeight and Composition of Coating on Terne Sheet by the Triple-Spot TestR(1999)
Standard Specification forLiquid Membrane-Forming Compounds for Curing Concrete
Standard Practice forEddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
Standard Reference Radiographsfor Tin Bronze Castings
Standard Practice for SamplingCryogenic Aerospace Fluids R(2000)
Test Method for DensityDetermination for Powder Metallurgy (P/M) Materials Containing Less Than
TwoPercent Porosity R(1997)
Standard Test Methods forSampling and Testing Fly Ash or Natural Pozzolans for Use as a MineralAdmixture
in Portland-Cement Concrete

Standard Specification forSeamless and Welded Austenitic Stainless Steel Pipes

Standard Specification forAsphalt Used in Roofing

Standard Specification forStainless Steel Spring Wire
Standard Specification forAluminum and Aluminum-Alloy Round Welded Tubes
Standard Specification forStainless Steel Billets and Bars for Forging
Standard Specification forSeamless Copper Alloy Pipe and Tube
Standard Specification forClay Flue Linings
Standard Specification forAluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
Standard Specification forAluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles forElectrical
Purposes (Bus Conductor)
Standard Specification forGypsum Concrete
Standard Specification forGypsum Formboard
Standard Specification forAlloy/Steel Bolting Materials for Low-Temperature Service

Standard Test Method for HailImpact Resistance of Aerospace Transparent Enclosures R(1999)
Standard Test Method for BondStrength of Chemical- Resistant Mortars
Standard Specification forSteel Bars, Alloy, Standard Grades R(1996)
Standard Guide for CleaningMetals Prior to Electroplating
Standard Test Method forGasoline Diluent in Used Gasoline Engine Oils by Distillation IP Designation:23/83
(92)
Standard Test Method for VaporPressure of Petroleum Products (Reid Method)
Standard Specification forStructural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile
StrengthAASHTO No.: M 164
Standard Specification forHigh-Strength Bolts for Structural Steel Joints (Metric)
Standard Test Methods forImpact Testing of Cast Irons R(1997)
Standard Specification forSteel Sheet Piling AASHTO No.: M 202
Standard Test Method forDensity, Oil Content, and Interconnected Porosity of Sintered MetalStructural Parts
and Oil-Impregnated Bearings
Standard Test Method forApparent Density of Metal Powders and Compounds Using the Scott Volumeter
Standard Specification forAcetone
Standard Specification forAgencies Engaged in the Testing and/or Inspection of Materials Used inConstruction
Standard Test Method forFisher Number of Metal Powders and Related Compounds
Standard Specification forLightweight Aggregates for Structural Concrete

Standard Specification for2-Butoxyethanol R(1997)

Standard Test Method forStructural Performance of Exterior Windows, Curtain Walls, and Doors byUniform
Static Air Pressure Difference E1-1998
Standard Test Method for BirdImpact Testing of Aerospace Transparent Enclosures R(1999)
Standard Specification forSteel Bars, Alloy, Cold- Finished R(2000)
Standard Specification forLightweight Aggregates for Concrete Masonry Units
Standard Specification for2-Ethoxyethanol R(1999)
Standard Test Method for WaterPenetration of Exterior Windows, Skylights, Doors, and Curtain Walls
byUniform Static Air Pressure Difference
Standard Specification forLightweight Aggregates for Insulating Concrete
Standard Specification forSeamless and Welded Steel Pipe for Low-Temperature Service
Standard Specification forNickel-Molybdenum Alloy Plate, Sheet, and Strip
Standard Practice for GeneralTechniques of Infrared Microanalysis
Standard Specification forSeamless Ferritic Alloy- Steel Pipe for High-Temperature Service
Standard Specification forNickel-Molybdenum Alloy Rod
Standard Test Method forSteady-State Heat Transfer Properties of Horizontal Pipe Insulation
Standard Test Method forHydroxyl Groups by Pyromellitic Dianhydride Esterification
Standard Specification forAlloy Steel Forgings for Pressure and High-Temperature Parts E1-2000
Standard Test Method forAnnealing Point and Strain Point of Glass by Fiber Elongation R(2000)
Standard Test Method forMeasurement of Airborne Sound Insulation in Buildings
Standard Specification forSeamless and Welded Titanium and Titanium Alloy Tubes for Condensers and
HeatExchangers
Standard Test Method forSoftening Point of Glass R(1998)
Standard Test Method ofSharp-Notch Tension Testing of High-Strength Sheet Materials R(1997)
Standard Specification for PigTin
Standard Test Method forMacroetching Metals and Alloys
Standard Test Method forDirect Current Magnetic Properties of Materials Using D-C Permeameters andthe
Ballistic Test Methods
Standard Viscosity-TemperatureCharts for Liquid Petroleum Products R(1998)
Standard Test Methods forPermeability of Feebly Magnetic Materials
Standard Specification forAluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for
Gasand Oil Transmission and Distribution Piping Systems
Standard Test Method forSampling and Testing Calcium Chloride for Roads and Structural Applications
Standard Test Methods ofTension Testing of Metallic Foil R(1998)
Standard Test Methods forAnalysis of Methanol
Standard Specification forTitanium and Titanium Alloy Bars and Billets
Standard Test Methods forRigid Tubes Used for Electrical Insulation
Standard Specification forCarbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing forPiping
Components

Standard Test Methods forFlexible Treated Sleeving Used for Electrical Insulation
Standard Test Methods forChemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel,Ingot
Iron, and Wrought Iron E1-2000 R(2000)
Standard Specification forCastings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-ContainingParts Used
in USDOE-NE Standards
Standard Classification forNatural Muscovite Block Mica and Thins Based on Visual Quality
Standard Test Methods forChemical Analysis of Cast Iron - All Types E1-2000 R(2000)
Standard Specification forSteel Castings, Ferritic and Martensitic, for Pressure-Containing Parts,Suitable for
Low-Temperature Service R(1998)
Standard Specification forQuenched and Tempered Alloy Steel Bolts, Studs, and Other Externally
ThreadedFasteners
Standard Test Methods forChemical Analysis of High- Temperature, Electrical, Magnetic, and OtherSimilar
Iron, Nickel, and Cobalt Alloys E1-2000 R(2000)
Standard Specification forNickel-Coated Soft or Annealed Copper Wire
Standard Practice for GasChromatography Terms and Relationships R(2001)
Standard Test Method forLinear Shrinkage of Preformed High-Temperature Thermal Insulation Subjectedto
Soaking Heat E1-1992 R(1997)
Standard Test Method forPhosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition
Standard Specification forWood to Be Used as Panels in Weathering Tests of Coatings
Standard Test Methods forAnalysis of Phosphoric Acid
Standard Specification forCopper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes
withIntegral Fins
Standard Test Methods forAnalysis of Soda Ash (Sodium Carbonate)
Standard Specification forFactory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
Standard Specification forReinforced Concrete Low- Head Pressure Pipe
Standard Specification forReinforced Concrete Low- Head Pressure Pipe (Metric)
Standard Specification forSeamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
Standard Test Method forFlatwise Compressive Properties of Sandwich Cores
Standard Specification forCommercial Steel (CS) Sheet, Carbon, (0.15 Maximum Percent) Cold-Rolled E11998
Standard Test Methods forMeasurement of Thickness of Sandwich Cores
Standard Specification forFixation Pins and Wires R(2000)
Standard Specification forTitanium and Titanium Alloy Castings R(1998)
Standard Method forCopper-Accelerated Acetic Acid- Salt Spray (Fog) Testing (CASS Test)
Standard Specification forCopper-Nickel Alloy Castings
Standard Test Method forSpecific Gravity of Creosote Fractions and Residue AASHTO No. T 74; E11995R(1995)
Standard Test Methods andDefinitions for Mechanical Testing of Steel Products
Standard Specification forCopper Sheet and Strip for Building Construction
Standard Specification forCopper-Zinc-Silicon Alloy Rod
Standard Specification forAsphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules; WideSelvage
R(1996)
Standard Specification forSeamless Copper and Copper- Alloy Rectangular Waveguide Tube

Standard Specification forAluminum Foil for Capacitors

Standard Test Methods forThickness of Solid Electrical Insulation
Standard Practice forMeasuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic)Test
Methods
Standard Practice forCleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, andSystems E12000
Standard Test Methods forRubber Hose R(2000)
Standard Test Method for Gum Contentin Fuels by Jet Evaporation IP Designation: 131/99
Standard Test Method forMicroindentation Hardness of Materials
Standard Practice forProviding High-Quality Zinc Coatings (Hot-Dip)
Standard Test Method for Thicknessof Resilient Flooring Materials Having Flat Surfaces
Standard Specification forPressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
Standard Test Method for Colorand Strength of Chromatic Pigments with a Mechanical Muller
Standard Test Method forMeasuring Thickness of Resilient Floor Covering with Foam Layer
Standard Specification forSteel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts,Suitable
for High-Temperature Service R(1998)
Standard Criteria for Samplingand Acceptance of Preformed Thermal Insulation Lots R(2000)
Standard Specification forCoal-Tar Creosote for the Preservative Treatment of Piles, Poles, and Timbersfor
Marine, Land, and Freshwater Use R(1999)
Standard Reference Radiographsfor Steel Fusion Welds
Standard Test Method forFlexural Properties of Sandwich Constructions
Standard Specification forSteel Transmission Tower Bolts, Zinc-Coated and Bare
Standard Specification forFerritic Ductile Iron Pressure-Retaining Castings for Use at ElevatedTemperatures
Standard Specification forU-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
Standard Specification forU-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser
Tubes(Metric)
Standard Specification forChemical-Resistant Resin Mortars
Standard Test Methods forRubber Property - Compression Set
Standard Specification forFuel Oils
Standard Specification forConcentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors R(1999)
Standard Specification forConcentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
Standard Test Method forPlane-Strain Fracture Toughness of Metallic Materials R(1997)
Standard Practice for SteelBars, Selection Guide, Composition, and Mechanical Properties R(2000)
Standard Classification ofAlumina and Alumina- Silicate Castable Refractories R(2000)
Standard Practice for SafeHandling of Solvent Cements, Primers, and Cleaners Used for JoiningThermoplastic
Pipe and Fittings R(1999)
Standard Specification forWrought Austenitic Stainless Steel Piping Fittings

Standard Specification forMagnesium-Alloy Investment Castings

Standard Test Method for Timeof Setting of Concrete Mixtures by Penetration Resistance
Standard Specification forAggregates for Masonry Grout
Standard Specification forCorrugated Polyethylene (PE) Pipe and Fittings
Standard Test Method forTransverse Rupture Strength of Cemented Carbides R(2000)
Standard Practice forMicroetching Metals and Alloys
Standard Test Method forThermal Conductivity of Whiteware Ceramics R(1999)
Standard Test Method forGrindability of Coal by the Hardgrove-Machine Method E2-2000
Standard Specification forThermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
Standard Test Method for WearLayer Thickness of Resilient Floor Coverings by Optical Measurement
Standard Specification forZinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
Standard Specification forCopper-Nickel-Silicon Alloy Rod and Bar
Standard Test Method forHot-Surface Performance of High-Temperature Thermal Insulation
(Discontinued) StandardSpecification for Copper- Nickel-Silicon Alloy Wire
Standard Specification forConcrete Drain Tile
Standard Specification forConcrete Drain Tile (Metric)
Standard Test Methods forVulcanized Rubber and Thermoplastic Elastomers - Tension
Standard Terminology Relatingto Plastic Piping Systems
Standard Specification forCarbon Steel Chain
Standard Test Method forAbsorption of Chemical- Resistant Mortars, Grouts, and Monolithic Surfacings
Standard Test Methods forRubber Property - Adhesion to Flexible Substrate
Classification for RatingSound Insulation R(1999)
Standard Test Method forWorking, Setting, and Service Strength Setting Times of Chemically SettingChemicalResistant Silicate and Silica Mortars
Standard Specification forHard-Drawn Aluminum-Clad Steel Wire
Standard Specification forCast and Wrought Galvanic Zinc Anodes E1-2000 R(2000)
Standard Test Method forAbrasion Resistance of Concrete by Sandblasting
Standard Guide to SiteCharacterization for Engineering Design and Construction Purposes
Standard Specification forUncoated Stress-Relieved Steel Wire for Prestressed Concrete AASHTO No.: M204

Standard Test Method forTumbling Friability of Preformed Block-Type Thermal Insulation

Standard Practice for DryPreparation of Soil Samples for Particle-Size Analysis and Determination ofSoil
Constants R(1998)
Standard Specification forCopper-Aluminum-Silicon- Cobalt Alloy, Copper-Nickel-Silicon-Magnesium
Alloy,Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum- Magnesiu
Standard Test Method forParticle-Size Analysis of Soils R(1998)
Standard Specification forSeamless and Electric- Welded Low-Alloy Steel Tubes R(2000)

Standard Test Method for SoundAbsorption and Sound Absorption Coefficients by the Reverberation Room
Method
Standard Specification forSteel, Sheet, for Porcelain Enameling
Standard Specification forNi-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Plate, Sheet, and Strip
Standard Test Methods forSolar Energy Transmittance and Reflectance (Terrestrial) of Sheet MaterialsE1- 1993
R(1993)
Standard Specification forCompression Joints for Vitrified Clay Pipe and Fittings
Standard Test Method forLinear Drying Shrinkage of Concrete Masonry Units
Standard Practice for Electromagnetic(Eddy-Current) Examination of Seamless and Welded Tubular
Products,Austenitic Stainless Steel and Similar Alloys
Standard Specification forGear Bronze Alloy Castings
Standard Test Method forWeight (Mass) of Coating on Aluminum-Coated Iron or Steel Articles
Standard Test Method for Angleof Twist in Rectangular and Square Copper and Copper Alloy Tube E1 R(1998)
Standard Practice forFabrication and Control of Steel Reference Blocks Used in UltrasonicExamination
Standard Specification forAluminum-Alloy Extruded Structural Pipe and Tube
Standard Test Method forParticle Size Distribution of Refractory Metal Powders and Related Compoundsby
Turbidimetry
Standard Test Methods forRubber Deterioration - Dynamic Fatigue R(2000)
Standard Specification forSteel Bars, Alloy, Hot- Wrought or Cold-Finished, Quenched and TemperedR(2000)
Standard Test Method forResistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam
Standard Specification forAustenitic Gray Iron Castings E1-1997 R(1997)
Standard Specification forHardened Steel Washers R(2000)
Standard Specification forHardened Steel Washers (Metric) R(2000)
Standard Specification forThreaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings,Schedule
80
Standard Test Method forTransverse Testing of Gray Cast Iron R(1997)
Standard Specification forSintered Bronze Bearings (Oil-Impregnated)

Standard Specification forGlasses in Laboratory Apparatus R(1996)

Standard Specification forSocket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe
Fittings,Schedule 40
Standard Specification forAustenitic Ductile Iron Castings R(1999)
Standard Specification forIron-Base Sintered Bearings (Oil-Impregnated)
Standard Specification forChlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
Standard Specification forCopper-Cobalt-Beryllium (UNS No. C17500) and Copper-Nickel-Beryllium (UNS
No.C17510) Rod and Bar

Standard Specification forChlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
Standard Specification forGypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board

Standard Specification forChlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)

Standard Specification forNickel-Chromium-Molybdenum- Columbium Alloy (UNS N06625) and NickelChromium-Molybdenum-Silicon Alloy (UNS N06219) Plate, Sheet, and Strip
Standard Specification forJoints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets
Standard Specification forJoints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets(Metric)
Standard Specification forNickel-Chromium-Molybdenum- Columbium Alloys (UNS N06625) and NickelChromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube E1- 2001
Standard Specification forPerforated Concrete Pipe
Standard Specification forPerforated Concrete Pipe (Metric)
Standard Test Methods forChemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) R(1999)
Standard Specification forNickel-Chromium-Molybdenum- Columbium Alloy (UNS N06625) and NickelChromium-Molybdenum-Silicon Alloy (UNS N06219) Rod and Bar E1- 2001
Standard Specifications andOperating Instructions for Glass Capillary Kinematic Viscometers IPDesignation:
71S2/95
Standard Reference Radiographsfor Steel Castings up to 2 in. (51 mm) in Thickness
Standard Consumer SafetySpecification for Grab Bars and Accessories Installed in the Bathing AreaR(1999)
Standard Specification forWelded Copper Tube
Standard Classification forSizes of Aggregate for Road and Bridge Construction
Standard Specification forQuenched and Tempered Steel Bolts and Studs
Standard Specification forChromates on Aluminum R(1998)
Standard Specification forMineral Fiber Hydraulic- Setting Thermal Insulating and Finishing Cement
Standard Specification forAsphalt Used in Dampproofing and Waterproofing E1 R(1999)
Standard Test Methods forAnalysis of Calcium Chloride
Standard Specification forGeneral Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy SteelTubes

Standard Specification forCoal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing E1-2000R(2000)
Standard Specification forCopper-Clad Steel Wire for Electronic Application E1-1998 R(1998)
Standard Specification forHigh-Temperature Bolting Materials, with Expansion Coefficients Comparable
toAustenitic Stainless Steels
Standard Specification forCopper-Zinc-Lead Alloy (Leaded-Brass) Rod
Standard Specification forCopper-Zinc-Lead Alloy (Leaded Brass) Rod (Metric)
Standard Test Method for TarAcids in Creosote-Coal Tar Solutions E1-2000 R(2000)
Standard Test Method forRubber Deterioration by Heat and Air Pressure

Standard Specification forElectrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel
PlusChromium
Standard Specification forCaustic Soda (Anhydrous) R(1997)
Standard Terminology Relatingto Quality and Statistics
Standard Test Method for Heatof Ablation E1-1996 R(1996)
Standard Practice forNondestructive Pull Testing of Wire Bonds E1-1995 R(1995)
Standard Test Methods forMeasuring Pull Strength of Microelectronic Wire Bonds E1-1995 R(1995)
Standard Test Methods forSampling and Chemical Analysis of Soaps and Soap Products R(1997)
Standard Test Methods for Felt
Standard Specification forSteel Sheet, Aluminum- Coated, by the Hot-Dip Process
Standard Specification for UNSN08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
Standard Specification forCopper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
Standard Test Methods for AcidNumber of Naval Stores Products Including Tall Oil and Other Related
Products
Standard Specification forWeldless Chain
Standard Specification forSeamless Copper-Nickel Pipe and Tube
Standard Specification forNonferrous Nuts for General Use
Standard Specification forNonferrous Nuts for General Use (Metric)
Standard Specification forNonferrous Bolts, Hex Cap Screws, and Studs for General Use
Standard Specification forNonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
Standard Specification forVacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
Standard Specification forMolds for Forming Concrete Test Cylinders Vertically
Standard Test Methods forCrosslinked Insulations and Jackets for Wire and Cable
Standard Test Method forRubber Property - Effect of Liquids E1-1999
Standard Specification for UNSN06030, UNS N06022, UNS N06200, UNS N08020, UNS N08026, UNS
N08024, UNSN08926, UNS N08367, UNS N10276, UNS N10665, UNS N10675, and UNS
Standard Test Methods forPhysical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
Standard Test Method forSediment in Crude Oils and Fuel Oils by the Extraction Method APIDesignation:
Chapter 10-1 (MPMS); BSI 4382; IP Designation: 53/82; E1-1995;
Standard Specification forZinc-Coated Steel Wire Strand
Standard Specification forJoint Compound and Joint Tape for Finishing Gypsum Board
Standard Specification forGeneral Requirements for Wrought Precious Metal Electrical Contact MaterialsE11995 R(1995)
Standard Specification forGrout for Masonry
Standard Classification forDry Pigmentary Titanium Dioxide Products
Standard Test Methods forSecurity of Swinging Door Assemblies R(1996)
Standard Specification forGold-Silver-Nickel Electrical Contact Alloy
Standard Specification for ElastomericSeals (Gaskets) for Joining Plastic Pipe
Standard Specification forChromium-Nickel Stainless Steel Weaving and Knitting Wire
Standard Specification forPrecast Reinforced Concrete Manhole Sections

Standard Specification forPrecast Reinforced Concrete Manhole Sections (Metric)

Standard Specification forZinc Yellow (Zinc Chromate) Pigments R(1997)
Standard Test Methods forChemical Analysis of Copper Alloys R(1996)
Standard Specification forStainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Standard Specification forGeneral Requirements for Flat-Rolled Stainless and Heat-Resisting SteelPlate, Sheet,
and Strip
Standard Test Methods forSampling and Testing of Flaked Aluminum Powders and Pastes R(1999)
Standard Specification forThermoplastic Well Casing Pipe and Couplings Made in Standard DimensionRatios
(SDR), SCH 40 and SCH 80
Standard Test Method for LaboratoryAging of Sandwich Constructions
Standard Test Method for Ashfrom Petroleum Products IP Designation: 4/96; British Standard 4450
Standard Specification forAluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
Standard Test Method for TotalImmersion Corrosion Test for Aircraft Maintenance Chemicals
Standard Specification forGeneral Requirements for Stainless Steel Bars, Billets, and Forgings
Standard Test Method forStress Crazing of Acrylic Plastics in Contact with Liquid or Semi-LiquidCompounds
E1-1998 R(1998)
Standard Specification forHigh Hardenability Antifriction Bearing Steel
Standard Specification forSteel Castings Suitable for Pressure Service R(1998)
Standard Test Method forMeasurement of Metal and Oxide Coating Thickness by Microscopical Examinationof
a Cross Section R(1997)
Standard Practice for SteelCastings, Welding, Qualifications of Procedures and Personnel
Standard Specification forElectrodeposited Coatings of Gold for Engineering Uses
Standard Test Methods forStrength of Anchors in Concrete and Masonry Elements
Standard Specification forCarbon Steel Lifting Eyes
Standard Specification forHeat-Treated Steel Structural Bolts, 150 ksi Minimum Tensile Strength
AASHTONo.: M 253
Standard Specification forHigh-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural SteelJoints
(Metric) AASHTO No.: M253M
Standard Specification forRoad Tar R(1997)
Standard Solar Constant andZero Air Mass Solar Spectral Irradiance Tables
Standard Specification forAluminum and Aluminum-Alloy Extruded Round Tubes for GeneralPurposeApplications
Standard Specification forStainless Steel Rope Wire R(2000)
Standard Specification forStainless Steel Wire and Wire Rods for Cold Heading and Cold Forging R(2000)
Standard Test Methods forLeaks Using the Mass Spectrometer Leak Detector in the Inside-Out TestingMode

Standard Specification forSolvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe
andFittings
Standard Specification forCastings, Nickel and Nickel Alloy
Standard Specification forChemical Admixtures for Concrete

Standard Practice forMeasuring Ultrasonic Velocity in Materials

Standard Test Method forCompressive Strength of Lightweight Insulating Concrete
Standard Test Method forHigh-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
Standard Specification forSteel Wire, Deformed, for Concrete Reinforcement
Standard Test Method forSplitting Tensile Strength of Cylindrical Concrete Specimens
Standard Specification forSteel Welded Wire Fabric, Deformed, for Concrete Reinforcement
Standard Test Methods forConcrete Pipe, Manhole Sections, or Tile
Standard Test Methods forConcrete Pipe, Manhole Sections, or Tile (Metric)
Standard Specification forPerforated Clay Drain Tile
Standard Test Methods forLeaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer inthe
Tracer Probe Mode R(2000)
Standard Specification forSteel Bars and Shapes, Carbon Rolled from "T" Rails E1-1997 R(1997)
Standard Test Method forMeasurement of Coating Thicknesses by the Magnetic Method:
NonmagneticCoatings on Magnetic Basis Metals
Standard Test Method forFacial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and FloorTile
R(1999)
Standard Test Methods forLeaks Using the Mass Spectrometer Leak Detector in the Detector Probe
ModeR(2000)
Standard Specification forSilver-Coated, Copper-Clad Steel Wire for Electronic Application
Standard Test Methods ofSampling and Chemical Analysis of Alkaline Detergents R(1998)
Standard Test Method forEffects of Cleaning and Chemical Maintenance Materials on Painted AircraftSurfaces
E1 R(1998)
Standard Test Method forMeasurement of Thickness of Metallic Coatings by the Coulometric MethodR(1997)
Standard Specification forSteel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, GeneralRequirements for
Standard Specification forCopper-Base Alloy Continuous Castings
Standard Specification forAlloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
Standard Specification forReinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
Standard Specification forReinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
Standard Specification forDrawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled R(1998)
Standard Specification forReinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
Standard Specification forReinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
Standard Specification forQuenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings
forPressure Vessels R(1999)

Standard Specification forCopper Alloy Strip for Flexible Metal Hose

Standard Specification forElastomeric Cellular Preformed Gasket and Sealing Material
Standard Specification forGeneral Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
Standard Specification forGeneral Requirements for Wire Rods and Coarse Round Wire, Carbon Steel(Metric)
Standard Test Method forResistance to Abrasion of Resilient Floor Coverings Using an Abrader with aGrit
Feed Method R(1999)
Standard Specification forSeamless Stainless Steel Mechanical Tubing
Standard Test Methods forCalcium and Magnesium in Water R(1998)
Standard Specification forCold-Drawn Buttweld Carbon Steel Mechanical Tubing
Standard Test Methods forChloride Ion in Water R(1999)
Standard Specification forElectric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
Standard Test Method forObtaining and Testing Specimens of Hardened Lightweight Insulating Concretefor
Compressive Strength R(1995)
Standard Specification forHigh-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable forWelding
AASHTO No.: M244
Standard Specification forNails for the Application of Gypsum Board
Standard Test Method for WaterPenetration and Leakage Through Masonry E1-1996; Supersedes C1389
R(1996)
Standard Specification forPressure Vessel Plates, Carbon Steel, for Intermediate- andHigher-Temperature
Service R(1997)
Standard Specification forVermiculite Loose Fill Thermal Insulation E1-1996 R(1996)
Standard Specification forPressure Vessel Plates, Alloy Steel, High-Strength, Quenched and TemperedR(1999)
Standard Specification forAsphalt Plank
Standard Test Method forPlastic Strain Ratio r for Sheet Metal
Standard Specification forCorrosion-Resistant High- Silicon Iron Castings
Standard Test Method forSteady-State Thermal Transmission Properties by Means of the Heat Flow
MeterApparatus
Standard Test Method forRubber Deterioration - Surface Cracking
Standard Test Methods forFlexural Bond Strength of Masonry
Standard Specification forSeamless Carbon and Alloy Steel Mechanical Tubing
Standard Specification forTin-Coated, Copper-Clad Steel Wire for Electronic Application E1-1998 R(1998)
Standard Test Methods forDensity of Granular Loose Fill Insulations
Standard Specification forZinc Dust Pigment
Standard Specification forGold-Silver-Platinum Electrical Contact Alloy E1-1995 R(1995)
Standard Test Methods forMandrel Bend Test of Attached Organic Coatings
Standard Test Method forSpecular Gloss R(1999)

Standard Test Method forRamsbottom Carbon Residue of Petroleum Products IP Designation: 14/94;British
Standard 4451
Standard Test Method forOxidation Stability of Gasoline (Induction Period Method) IP Designation:40/97;
British Standard 4347
Standard Test Method forMeasuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests
Standard Practice forNumbering Metals and Alloys (UNS) E1-1997 R(1997)
Standard Specification forHigh-Strength Carbon- Manganese Steel of Structural Quality
Standard Test Method forEnclosed Carbon-Arc Exposures of Bituminous Materials
Standard Guide for ConductingFlexural Tests on Beams and Girders for Building Construction E1-1998
R(1998)
Standard Specification forGeneral Requirements for Specialized Carbon and Alloy Steel Pipe E1-2000
Standard Test Method forMeasurement of Coating Thicknesses by the Magnetic Method:
ElectrodepositedNickel Coatings on Magnetic and Nonmagnetic Substrates
Standard Test Method forLinear Shrinkage and Coefficient of Thermal Expansion of ChemicalResistantMortars, Grouts, Monolithic Surfacings, and Polymer Concretes
Standard Test Method forRubber Property - Pusey and Jones Indentation
Standard Specification forAbrasion-Resistant Cast Irons E1-1999 R(1999)

Standard Specification forPressure Vessel Plates, Alloy Steel, Quenched and Tempered, ManganeseMolybdenum and Manganese-Molybdenum-Nickel R(1999)
Standard Specification forCarburizing Steels for Anti- Friction Bearings
Standard Specification for PreformedFlexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular
Form
Standard Test Method forResistance to Degradation of Large-Size Coarse Aggregate by Abrasion andImpact in
the Los Angeles Machine E1-1996
Standard Specification forDuctile Iron Castings E1- 1999 R(1999)
Standard Test Methods forChemical Analysis of Zinc and Zinc Alloys
Standard Test Method for Sizeof Resilient Floor Tile by Dial Gage Method
Standard Specification forPressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel R(2000)
Standard Test Method forAssessing the Thermal Stability of Chemicals by Methods of Thermal Analysis
Standard Specification forDesign, Fabrication, and Installation of Fences Constructed of Wood andRelated
Materials
Standard Specification forPalladium Electrical Contact Alloy
Standard Specification forGold Electrical Contact Alloy
Standard Specification forAlloy Steel Eyebolts
Standard Specification forLock-Strip Gaskets R(1999)
Standard Test Method for Indexof Refraction of Transparent Organic Plastics
Standard Practice forCalibration of Laboratory Volumetric Apparatus
Standard Specification forWelded Copper and Copper- Alloy Heat Exchanger Tube
Standard Practices forEvaluating the Resistance of Plastics to Chemical Reagents

Standard Practice for AgenciesPerforming Nondestructive Testing

Standard Specification forElectrodeposited Coatings of Tin E1-2001
Standard Test Methods forPreformed Expansion Joint Fillers for Concrete Construction (Nonextruding
andResilient Types)
Standard Test Method forDetermining Image Quality in Direct Thermal Neutron Radiographic Examination
Standard Test Method for SieveAnalysis of Mineral Filler for Road and Paving Materials AASHTO No.: T
37;E1-1999
Standard Test Method for FrostPoint of Sealed Insulating Glass Units E1-1999 R(1999)
Standard Specification forAluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
Standard Specification forMineral Fiber Pipe Insulation
Standard Specification forPerlite Loose Fill Insulation E1-1995 R(1995)
Standard Test Method forMeasuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
Standard Specification forCellular Glass Thermal Insulation
Standard Terminology Relatingto Chain Link Fencing
Specification for MineralFiber Blanket Thermal Insulation for Commercial and Industrial Applications
Standard Specification forWelded Stainless Steel Mechanical Tubing E1-1999
Standard Specification forGeneral Requirements for Stainless Steel Wire and Wire Rods
Standard Guide for TestingDrying Oils R(1998)
Standard Test Methods ofTension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
Standard Test Methods ofTension Testing Wrought and Cast Aluminum- and Magnesium-Alloy
Products(Metric)
Standard Specification forAdhesives for Fastening Gypsum Wallboard to Wood Framing
Standard Practice forArchitectural Application and Installation of Operable Partitions
Standard Test Methods forMoisture-Density Relations of Soil-Cement Mixtures
Standard Specification forNickel-Coated, Copper-Clad Steel Wire for Electronic Application E1-1998R(1998)
Standard Test Methods forWetting and Drying Compacted Soil-Cement Mixtures
Standard Test Methods forFreezing and Thawing Compacted Soil-Cement Mixtures
Standard Specification forUnalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
Standard Practice forMacroetch Testing of Tool Steel Bars R(1999)
Standard Test Method for Ashin a Graphite Sample R(2000)
Standard Test Method forMoisture in a Graphite Sample R(2000)
Standard Specification forCarbon and Alloy Steel Nuts
Standard Specification forCarbon and Alloy Steel Nuts (Metric)
Standard Specification forPalladium-Silver-Copper Electrical Contact Alloy
Standard Test Method forPhthalic Anhydride Content of Alkyd Resins and Resin Solutions E1-1996R(1996)
Standard Specification forHot-Rolled and Cold- Finished Age-Hardening Stainless Steel Bars and Shapes
Standard Specification forNickel Alloy Forgings

Standard Specification forRubber Gaskets for Cast Iron Soil Pipe and Fittings
Standard Test Methods forLiquid Paint Driers R(1996)
Standard Specification forMartensitic Stainless Steel Bars, Forgings, and Forging Stock forHigh-Temperature
Service
Standard Test Method for ShearTesting of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and
RodsR(2000)
Standard Test Method forCarbonizable Substances in White Mineral Oil
Standard Specification forCopper-Clad Aluminum Wire E1-1998 R(1998)
Standard Test Method for TotalEvaporable Moisture Content of Aggregate by Drying
Standard Test Method forDropping Point of Lubricating Grease IP Designation: 132/97
Standard Test Method forMeasurement of Coating Thickness by the Beta Backscatter Method
Standard Test Method forDetermining Density of Structural Lightweight Concrete
Standard Specification forSteel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled andCold-Rolled,
General Requirements for
Standard Test Method forMeasurement of Coating Thickness by X-Ray Spectrometry
Standard Specification forLimestone Dimension Stone
Standard Specification forCarbon and Alloy Steel Externally Threaded Metric Fasteners
Standard Specification forCarbon and Alloy Steel Externally Threaded Metric Fasteners
Standard Specification forStructural Steel, Sheet and Strip, Carbon, Hot-Rolled
Standard Specification forOil- and Resin-Base Caulking Compound for Building Construction
Standard Test Method for WaterAbsorption of Plastics
Standard Practice for FluxLeakage Examination of Ferromagnetic Steel Tubular Products
Standard Practice forQualitative Adhesion Testing of Metallic Coatings E1-2000
Standard Test Method forRubber - Deterioration by Heat and Oxygen
Standard Test Method forRubber - Deterioration in an Air Oven
Standard Specification forAlloy Steel Socket-Head Cap Screws
Standard Specification forAlloy Steel Socket-Head Cap Screws (Metric)
Standard Specification forLow-Carbon Nickel- Molybdenum-Chromium, Low-Carbon Nickel-ChromiumMolybdenum, Low-Carbon Nickel-Molybdenum-Chromium- Tantalum, Low-Carbon
Standard Specification forSteel Bars, Carbon, Merchant Quality, M-Grades
Standard Specification forLow-Carbon Nickel- Molybdenum-Chromium, Low-Carbon Nickel-ChromiumMolybdenum, and Low-Carbon Nickel-Chromium-Molybdenum- Copper, Low-Carb
Standard Test Methods forRubber Properties in Compression R(1996)
Standard Specification forSteel Bars, Carbon, Hot- Wrought, Special Quality R(2000)
Standard Test Method for FrostPoint of Sealed Insulating Glass Units in the Vertical Position E1- 2000R(1999)
Standard Test Methods for Detectionof Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
R(1998)
Standard Guide for DimensionalCoordination of Rectilinear Building Parts and Systems R(1999)
Standard Specification forStraight-Beam Ultrasonic Examination of Plain and Clad Steel Plates forSpecial
Applications

Standard Test Method forMicrohardness of Electroplated Coatings R(1999)

Standard Specification forRigid, Cellular Polystyrene Thermal Insulation
Standard Specification forGlass Fiber Strands
Standard Specification forSuperstrength Alloy Steel Forgings
Standard Specification forElectrodeposited Coatings of Tin-Lead Alloy (Solder Plate) R(1999)
Standard Specification forGreige Woven Glass Fabrics
Standard Specification forStainless Steel Wire
Standard Specification forAnodic Oxide Coatings on Aluminum R(2000)
Standard Test Method forFlexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars,Grouts,
Monolithic Surfacings, and Polymer Concretes
Standard Practice forApplication of Ceiling Suspension Systems for Acoustical Tile and Lay-InPanels in Areas
Requiring Seismic Restraint
Standard Specification forFree-Machining Stainless Steel Wire and Wire Rods R(2000)

Standard Practice forDetermining Chemical Resistance of Thermosetting Resins Used inGlass-FiberReinforced Structures Intended for Liquid Service
Standard Specification forFree-Machining Stainless Steel Bars R(2000)

Standard Specification forContact-Molded Reinforced Thermosetting Plastic (RTP) Laminates forCorrosionResistant Equipment
Standard Specification forCopper Alloy Sand Castings for General Applications
Standard Practice for Samplingand Accepting a Single Lot of Paper, Paperboard, Fiberboard, and
RelatedProduct
Standard Practice forInsertion of Flexible Polyethylene Pipe into Existing Sewers R(2000)
Standard Specification forZinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-CoatedWire
for Spun-In-Place Structural Strand
Standard Test Method forPotential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates
(RockCylinder Method)
Standard Specification forGypsum Veneer Plaster
Standard Specification forHigh-Strength Low-Alloy Structural Steel with 50 ksi (345 MPa) Minimum
YieldPoint to 4-in. (100-mm) Thick AASHTO No.: M 222
Standard Specification forGypsum Base for Veneer Plasters
Standard Specification forSeamless and Welded Carbon Steel Water-Well Pipe
Standard Test Method for PetroleumWax in Paper R(1997)
Standard Specification forSteel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight (Mass)Applications
Standard Specification forCopper-Zinc-Tin and Copper- Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip,and
Rolled Bar
Standard Specification forUnfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

Standard Specification forMineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh
Covered) (Industrial Type)
Standard Test Method forBending Fatigue Testing for Copper-Alloy Spring Materials
Standard Specification forStainless Steel Bolts, Hex Cap Screws, and Studs
Standard Practice for UltrasonicInspection of Aluminum-Alloy Wrought Products for Aerospace Applications
Standard Specification forStainless Steel Nuts
Standard Specification forSteel Tubes, Low-Carbon, Tapered for Structural Use
Standard Specification forBlended Hydraulic Cements E1-2000
Standard Specification forTetrasodium Pyrophosphate (Anhydrous) R(1997)
Standard Test Method for TotalMass Loss and Collected Volatile Condensable Materials from Outgassing in
aVacuum Environment R(1999)
Standard Specification forGold-Copper Alloy Electrical Contact Material R(1999)
Standard Test Method forLaboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
Standard Specification forCast Tool Steel R(1999)
Standard Practice for HeatTreatment of Aluminum Alloys R(1998)
Standard Test Method for PulseVelocity Through Concrete
Standard Practice forDetermining Offset Yield Strength in Tension for Copper Alloys
Standard Specification forTool Steel High Speed R(1999)
Standard Guide for Descalingand Cleaning Titanium and Titanium Alloy Surfaces E1-1997 R(1997)
Standard Specification forLiquid Paint Driers R(1997)
Standard Practice for TemperDesignations for Copper and Copper Alloys - Wrought and Cast
Standard Specification forAgricultural Liming Materials
Standard Test Method forSharp-Notch Tension Testing with Cylindrical Specimens R(1997)
Standard Specification forZinc-Coated Steel Structural Wire Rope
Standard Test Method forExtrusion Rate and Application Life of Elastomeric Sealants E1-1997 R(1997)
Standard Test Method forMacroetch Testing of Consumable Electrode Remelted Steel Bars and BilletsR(1998)
Standard Specification forDiatomaceous Silica Pigment E1-1996 R(1996)
Standard Test Method forDynamic Tear Testing of Metallic Materials R(1994)
Standard Test Methods forThickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied
toStructural Members R(2000)
Standard Specification forSteel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled,with
Improved Atmospheric Corrosion Resistance
Standard Test Methods forDetermining the Mechanical Properties of Externally and Internally
ThreadedFasteners, Washers, and Rivets
Standard Test Methods forDetermining the Mechanical Properties of Externally and Internally
ThreadedFasteners, Washers, and Rivets (Metric)
Standard Specification forSteel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, orBoth,
Hot-Rolled and Cold-Rolled

Standard Specification forAutocatalytic Nickel Boron Coatings for Engineering Use R(1998)
Standard Specification for WetGround Mica Pigments R(1999)
Standard Test Method forOptical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys bythe
Point-To-Plane Technique, Nitrogen Atmosphere R(1996)
Standard Test Method forAdhesion of Gasket Materials to Metal Surfaces
Standard Practice forCastings, Carbon, Low-Alloy, and Martensitic Stainless Steel, UltrasonicExamination
Thereof R(1997)
Standard Specification forAluminum 1350 Round Wire, Annealed and Intermediate Tempers, for
ElectricalPurposes
Standard Practice forPreparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, ConversionCoatings,
and Related Coating Products
Standard Specification forMolded Expanded Perlite Block and Pipe Thermal Insulation
Standard Test Method forEvaluating Degree of Rusting on Painted Steel Surfaces
Standard Specification forStructural Steel (SS), Sheet, Carbon, Cold-Rolled
Standard Test Methods forAniline Point and Mixed Aniline Point of Petroleum Products and
HydrocarbonSolvents IP Designation: 2/98 R(1998)
Standard Specification forMineral Fiber Block and Board Thermal Insulation
Standard Test Method forCarbonizable Substances in Paraffin Wax R(1999)
Standard Test Method forConstituent Content of Composite Prepreg by Soxhlet Extraction
Standard Test Method forCetane Number of Diesel Fuel Oil IP Designation: 41/99
Standard Specification forGranite Dimension Stone
Standard Specification forQuartz-Based Dimension Stone
Standard Specification forCoin Silver Electrical Contact Alloy
Standard Practice for CappingCylindrical Concrete Specimens
Standard Test Method forPunching Quality of Phenolic Laminated Sheets R(1998)
Standard Specification forCoal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a MineralAdmixture
in Concrete
Standard Practice forConditioning Plastics for Testing
Standard Practice forEvaluating Foreign Odors in Paper Packaging R(1995)
Standard Specification forDrawing Steel (DS), Sheet, Carbon, Cold-Rolled
Standard Practice for Use ofMetric (SI) Units in Building Design and Construction (Committee E-6Supplement
to E380) E1-1999 R(1999)
Standard Specification forDrawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled
Standard Test Methods forRubber Hose for Automotive Air and Vacuum Brake System
Standard Specification for TinMill Products, General Requirements
Standard Specification for TinMill Products, General Requirements (Metric)
Standard PerformanceSpecification for Foley Catheter
Standard Specification for TinMill Products, Electrolytic Tin Plate, Single Reduced
Standard Specification forHigh-Strength, High- Conductivity Copper-Alloy Wire for ElectronicApplication

Standard Test Method for TearStrength of Conventional Vulcanized Rubber and Thermoplastic ElastomersE12001
Standard Specification for TinMill Products, Black Plate, Single-Reduced
Standard Specification for TinMill Products, Electrolytic Tin Plate, Double Reduced
Standard Specification forHomogeneous Tool-Resisting Steel Bars for Security Applications
Standard Specification forSilver-Copper Eutectic Electrical Contact Alloy
Standard Specification forSlate Dimension Stone
Standard Test Methods forQuantitative Analysis of Textiles
Standard Test Methods forDetermination of Tin Coating Weights for Electrolytic Tin Plate
Standard Specification forWater-Resistant Gypsum Backing Board
Standard Specification forNormalized High-Strength Low-Alloy Structural Steel Plates

Standard Test Method forAdhesion or Cohesive Strength of Flame-Sprayed Coatings R(1999)

Standard Volume CorrectionTable for Road Tar
Standard Specification forSteel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled
Standard Specification for theManufacture, Performance, and Testing of Metal Suspension Systems
forAcoustical Tile and Lay-In Panel Ceilings
Standard Test Method for Rateof Burning and/or Extent and Time of Burning of Plastics in a
HorizontalPosition
Standard Practice forInstallation of Metal Ceiling Suspension Systems for Acoustical Tile andLay-In Panels
Standard Specification forPrecipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock forHighTemperature Service
Standard Specification for SAggregates for Radiation- Shielding Concrete
Standard DescriptiveNomenclature of Constituents of Aggregates for Radiation-Shielding ConcreteR(1997)
Standard Test Method forTensile Properties of Plastics
Standard Test Method forTensile Properties of Plastics (Metric)
Standard Test Method forRheological (Flow) Properties of Elastomeric Sealants
Standard Specification forWelded Copper Tube for Air Conditioning and Refrigeration Service
Standard Test Methods forRadiopacity of Plastics for Medical Use R(2000)
Standard Specification forZinc-Coated (Galvanized) Carbon Steel Wire
Standard Test Method forStaining Materials in Lightweight Concrete Aggregates E1
Standard Test Method forDetermining Compressive Resistance of Shipping Containers, Components, andUnit
Loads
Standard Specification forCopper-Beryllium Alloy Seamless Tube
Standard Terminology Relatingto Iron Castings
Standard Specification forCopper Alloy Addition Agents
Standard Test Method forMoisture Content of Paper and Paperboard by Oven Drying

Standard Practice forPlane-Strain Fracture Toughness Testing of Aluminum Alloys

Standard Specification forNonstructural Steel Framing Members
Standard Practice for FractureToughness Testing of Aluminum Alloys
Standard Test Method forGrammage of Paper and Paperboard (Mass per Unit Area) TAPPI T 410 om-88
Standard Test Method forDeflection Temperature of Plastics under Flexural Load in the EdgewisePosition
Standard Test Method forCritical Radiant Flux of Floor-Covering Systems Using a Radiant Heat EnergySource
Standard Specification forElectrodeposited Engineering Chromium Coatings on Ferrous Substrates
Standard Test Method forFlexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point
Loading at Room Temperature R(2000)
Standard Terminology Relatingto Soil, Rock, and Contained Fluids R(2000)
Standard Specification forPorous Concrete Pipe
Standard Specification forPorous Concrete Pipe (Metric)
Standard Specification forReinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
Standard Specification forReinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
Standard Specification forChemical-Resistant Resin Grouts for Brick or Tile
Standard Specification forCommercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25
MaximumPercent), Hot-Rolled
Standard Practices for Packaging/Packingof Aluminum and Magnesium Products
Standard Test Method forEvaluating Degree of Checking of Exterior Paints R(2000)
Standard Practice for HeatTreatment of Magnesium Alloys
Standard Test Method forIndentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
Standard Test Method forEvaluating Degree of Cracking of Exterior Paints R(2000)
Standard Test Method forEvaluating Degree of Erosion of Exterior Paints R(2000)
Standard Test Method forSpecific Optical Density of Smoke Generated by Solid Materials
Standard Specification forSteel Bars, Carbon, Merchant Quality, Mechanical Properties R(2000)
Standard Specification forSilver-Tungsten Carbide Electrical Contact Material R(2000)
Standard Specification forAsbestos-Cement Storm Drain Pipe
Standard Specification forMineral-Fiber Blanket Thermal Insulation for Light Frame Construction
andManufactured Housing
Standard Test Method forRust-Preventing Characteristics of Inhibited Mineral Oil in the Presence ofWater IP
Designation: 135/93
Standard Practice for UsingAbsorbed Dose Versus Depth in Materials to Verify the X-Ray Output of FlashXRay Machines
Standard Specification forAnnealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, andFlat Bar
Standard Practice forIdentification Marking of Aluminum and Magnesium Products E1-1997
Standard Test Method forResistance of Concrete to Rapid Freezing and Thawing
Standard Practice forCalculating Absorbed Dose from Gamma or X Radiation
Standard Specification forCentrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders R(1998)

Standard Specification forMercury-In-Glass, Maximum Self-Registering, Clinical Thermometers

Standard Specification forSteel Forgings, Carbon and Alloy, for General Industrial Use E1; AASHTO No.:M
102
Standard Practice forApplication of Thermoluminescence-Dosimetry (TLD) Systems for DeterminingAbsorbed
Dose in Radiation-Hardness Testing of Electronic Devices
Standard Specification forGlazing Compounds for Back Bedding and Face Glazing of Metal Sash
Standard Specification forPrecipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip forHighTemperature Service
Standard Practice forPreparing Precision and Bias Statements for Test Methods for ConstructionMaterials
Standard Specification forTanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing E1-1994 R(1994)
Standard Test Method forFlexural Fatigue of Plastics by Constant-Amplitude-Of-Force
Standard Specification forMaximum Permissible Thermal Residual Stress in Annealed Glass
LaboratoryApparatus
Standard Specification forDisposable Glass Micropipets E1-1992 R(1996)
Standard Specification forSampling Procedure for Impact Testing of Structural Steel AASHTO No.: T 243
Standard Specification forSteel Bars, Carbon, Hot- Wrought, Special Quality, Mechanical PropertiesR(2000)

Standard Specification forInterchangeable Taper- Ground Stopcocks and Stoppers R(1998)

Standard Test Method forTack-Free Time of Elastomeric Sealants E1-1997 R(1997)
Standard Specification forTool Steels Alloy R(1999)
Standard Practice for Use ofBranch Connections R(1998)
Standard Specification forSteel, Strip, High-Carbon, Cold-Rolled, General Requirements for
Standard Practice for LiquidChromatography Terms and Relationships R(2000)
Standard Specification forWrought Carbon Steel Sleeve- Type Pipe Couplings R(1998)
Standard Specification forPure Palladium Electrical Contact Material E1-1995 R(1995)
Standard Practice forSelection and Application of Thermal Insulation for Piping and Machinery
Standard Specification forSteel, Strip, High-Carbon, Cold-Rolled R(1998)
Standard Specification forPlatinum-Iridium Electrical Contact Materials
Standard Specification forPalladium-Copper Electrical Contact Material E1-1995 R(1995)
Standard Specification forConcrete Made by Volumetric Batching and Continuous Mixing

Standard Practice forConditioning Paper and Paper Products for Testing TAPPI T 402 R(1998)
Standard Specification forTool Steel, Carbon R(1999)
Standard Specification forBrass, Copper, and Chromium- Plated Pipe Nipples
Standard Specification forElectroplated Engineering Nickel Coatings
Standard Test Method forInternal Tearing Resistance of Paper

Standard Specification forHigh-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in
MarineEnvironments
Standard Practice forConducting an Interlaboratory Study to Determine the Precision of a TestMethod
Standard Specification forCoarse Aggregate for Bituminous Paving Mixtures
Standard Specification forPrecipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, andStrip
R(1999)
Standard Specification for CrushedAggregate for Macadam Pavements
Standard Specification forLaboratory Glass Volumetric Apparatus
Standard Specification forSteel Bars, Carbon, Hot- Wrought, Special Quality, for Fluid PowerApplications E11995 R(1995)
Standard Specification forCoatings of Zinc Mechanically Deposited on Iron and Steel
Standard Test Method forCompressive Strength of Carbon and Graphite R(2000)
Standard Test Method forCompressive Properties of Rigid Plastics
Standard Specification forSteel Bars, Carbon, Hot- Wrought or Cold-Finished, Special Quality, forPressure
Piping Components R(2000)
Standard Specification forCoatings of Cadmium Mechanically Deposited
Standard Test Method forCoefficient of Linear Thermal Expansion of Plastics between -30 Degrees C and30
Degrees C with Vitreous Silica Dilatometer
Standard Specification forLeather Protectors for Rubber Insulating Gloves and Mittens
Standard Test Methods forLaboratory Compaction Characteristics of Soil Using Standard Effort (12,400ftlbf/ft3 (600 kN-m/m3))
Standard Practices forPackaging, Marking, and Loading Methods for Steel Products for DomesticShipment E12000
Standard Specification forVitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
Standard Specification forSteel Fence Posts and Assemblies, Hot Wrought R(2000)
Standard Practice for ReducingSamples of Aggregate to Testing Size AASHTO T248
Standard Specification forSteel Castings, General Requirements, for Pressure-Containing Parts
Standard Specification forMelamine-Formaldehyde Molding Compounds
Standard Practice forSelecting Bolting Lengths for Piping System Flanged Joints E1-1996 R(1996)
Standard Specification forLow-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
Standard Specification forCellulose Acetate Molding and Extrusion Compounds
Standard Specification forCellulose Acetate Butyrate Molding and Extrusion Compounds
Standard Specification forModular Gage Boards
Standard Practice for Designand Installation of Rigid Pipe Hangers R(1997)
Standard Specification forLaminated Thermosetting Materials
Standard Guide for MagneticParticle Examination
Standard Specification forAge-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium
AlloyStructural Steel Plates
Standard Specification forVulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
Standard Specification forSteel Forging Stock E1-1997 R(1996)

Standard Test Method forNo-Pick-Up Time of Traffic Paint R(1998)

Standard Guide for Selectionof Scales for Metric Building Drawings E1-1999 R(1999)
Standard Test Method forEvaluating Degree of Blistering of Paints R(2000)
Standard Specification forSteel Sheet and Strip, High- Strength, Low-Alloy, Hot-Rolled, and SteelSheet, ColdRolled, High-Strength, Low-Alloy, with Improved Formab
Standard for Shipbuilders andMarine Paints and Coatings Product/Procedure Data Sheet
Standard Test Method forAdhesion and Cohesion of Elastomeric Joint Sealants under Cyclic
Movement(Hockman Cycle) R(1998)
Standard Test Method forFree-Swelling Index of Coal R(1999)
Standard Guide for Selectionand Use of Neutron- Activation Foils for Determining Neutron Spectra
Employedin Radiation-Hardness Testing of Electronics
Standard Test Method forAverage Particle Size of Alumina and Silica Powders by Air PermeabilityE1-1997
R(1997)
Standard Test Method for OilContent of Petroleum Waxes IP Designation: 158/69(85)
Standard Guide for DeterminingNeutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing
ofElectronics
Standard Specification forGage Piping Assemblies R(1998)
Standard Practice forCharacterizing Neutron Energy Fluence Spectra in Terms of an EquivalentMonoenergetic
Neutron Fluence for Radiation-Hardness Testing of Electron
Standard Test Method for SurfaceWettability of Paper (Angle-Of-Contact Method)
Standard Specification forSemidense Mineral Fiber Siding R(1998)
Standard Specification forMineral Fiber Roof Insulation Board
Standard Test Method forResistance of Nonporous Paper to Passage of Air R(1999)
Standard Test Method forSorbent Performance of Adsorbents
Standard Specification forPerlite Thermal Insulation Board
Standard Specification for 60%Palladium-40% Silver Electrical Contact Material
Standard Test Method for AgingEffects of Artificial Weathering on Latex Sealants
Standard Test Method for ShearStrength of Plastics by Punch Tool
Standard Specification forDisposable Pasteur-Type Pipet R(1996)
Standard Specification forWelded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
Standard Specification forAutocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
Standard Test Method forCohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to
StructuralMembers
Standard Specification forStainless Steel Metric Bolts, Screws, and Studs
Standard Specification forStainless Steel Metric Bolts, Screws, and Studs
Standard Specification forSteel Bars, Alloy, Hot- Wrought, for Elevated Temperature or Pressure-Containing
Parts, or Both R(2000)
Standard Specification forCellulosic Fiber (Wood- Base) Loose-Fill Thermal Insulation
Standard Specification forHardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
Standard Specification forCopper-Nickel-Tin Spinodal Alloy Strip
Standard Specification forSteel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel
PipeAASHTO No.: M 246/M 246M
Standard Specification forFine Silver Electrical Contact Fabricated Material R(2000)

Standard Specification forCastings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, forGeneral

Application E1-1999
Standard Specification forCastings, Iron-Chromium- Nickel, Corrosion Resistant, for Severe Service
Standard Specification forPrefaced Concrete and Calcium Silicate Masonry Units
Standard Test Method forMeasuring Dose Rate Threshold for Upset of Digital Intergrated Circuits(Metric)
Standard Specification forCorrugated Aluminum Pipe for Sewers and Drains
Standard Specification forDuctile Iron Gravity Sewer Pipe
Standard Specification forCorrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe,Pipe-Arches, and
Arches R(2000)
Standard Test Method forApparent Bending Modulus of Plastics by Means of a Cantilever Beam
Standard Specification forSteel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled,
GeneralRequirements for
Standard Test Methods,Practices, and Terminology for Chemical Analysis of Steel Products
Standard Test Methods forCoated Fabrics
Standard Specification forInstallation of Steel Framing Members to Receive Screw-Attached Gypsum
PanelProducts
Standard Specification forSteel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by theCoilCoating Process for Exterior Exposed Building Products
Standard Test Method forMeasuring Vibration-Damping Properties of Materials
Standard Specification forSteel Castings, Ferritic and Martensitic, for Pressure-Containing and
OtherApplications, for Low-Temperature Service
Standard Specification forSmooth-Wall Poly (Vinyl Chloride)(PVC) Plastic Underdrain Systems forHighway,
Airport, and Similar Drainage R(2000)
Standard Specification forCarbon Steel Crane Rails
Standard Test Method forEffect of Deflection on Sprayed Fire-Resistive Material Applied to
StructuralMembers R(2000)
Standard Specification forCorrugated Steel Pipe, Metallic-Coated for Sewers and Drains AASHTO
No.:M36/M36M
Standard Test Method forEffect of Impact on Bonding of Sprayed Fire-Resistive Material Applied toStructural
Members R(2000)
Standard Specification forCorrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches,
and Arches AASHTO No.: M167/M167M
Standard Test Method forCompressive Strength of Sprayed Fire-Resistive Material Applied to
StructuralMembers R(2000)
Standard Specification forCorrugated Steel Pipe, Polymer Precoated for Sewers and Drains AASHTO
No.M245/M245M
Standard Specification forCopper Alloy Sand Castings for Valve Application
Standard Specification forMetallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size forMechanical
Springs R(2001)
Standard Specification forMineral Fiber Loose-Fill Thermal Insulation
Standard Specification forWildcats, Ship Anchor Chain R(1998)

Standard Specification forElectrodeposited Coatings of Cadmium R(1998)

Standard Specification forZinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

Standard Specification forVacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors andShafts
Standard Specification forCopper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip andSheet
Standard Specification forThrough-Thickness Tension Testing of Steel Plates for Special ApplicationsR(1996)
Standard Specification forCopper-Beryllium Alloy Sand Castings for General Applications
Standard Test Method forEvaluating Degree of Flaking (Scaling) of Exterior Paints R(2000)
Standard Practice forMeasuring Dose Rate Response of Linear Integrated Circuits (Metric)
Standard Test Method forBursting Strength of Paper
Standard Specification for theClassification of the Durability of Sealed Insulating Glass Units
Standard Specification forStandard Sand
Standard Test Method for WaterResistance of Paper, Paperboard, and Other Sheet Materials by the DryIndicator
Method R(1998)
Standard Practice for Repairof Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
Standard Specification for 75% Silver, 24.5 % Copper, 0.5 % Nickel Electrical Contact Alloy
Standard Test Method forPreconstruction and Construction Evaluation of Mortars for Plain and ReinforcedUnit
Masonry
Standard Specification forIron Graphite Sintered Bearings (Oil-Impregnated)
Standard Specification forDoors, Furniture, Marine
Standard Specification forStaple, Handgrab, Handle, and Stirrup Rung R(1998)
Standard Test Method forRockwell Hardness of Plastics and Electrical Insulating Materials
Standard Specification forCrucibles, Ignition, Laboratory, Metal E1-1997 R(1996)
Standard Specification forHot-Rolled Carbon, Low- Alloy, High-Strength Low-Alloy, and Alloy Steel
FloorPlates
Standard Specification forDishes, Evaporating, Platinum E1-1997 R(1996)
Standard Specification forEthyl Cellulose Molding and Extrusion Compounds
Standard Specification forDisposable Glass Micro Blood Collection Pipets R(1996)
Standard Specification forSteel Forgings, General Requirements
Standard Practice forInstalling Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
Standard Classification Systemfor Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
Standard Specification forPipet, Blood Diluting
Standard Specification for SurfaceDiscontinuities of Bolts, Screws, and Studs, Inch and Metric Series
Standard Test Methods forFlexural Properties of Unreinforced and Reinforced Plastics and ElectricalInsulating
Materials

Standard Test Method forStress Crazing of Transparent Plastics

Standard Specification forSteel Sheet, 55% Aluminum- Zinc Alloy-Coated by the Hot-Dip Process
Standard Test Method forEffects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric
SealantsR(1998)
Standard Test Methods forDensity and Specific Gravity (Relative Density) of Plastics by Displacement
Standard Specification forRolled Floor Plate, Stainless Steel
Standard Test Method forEffects of Accelerated Weathering on Elastomeric Joint Sealants E1-1997R(1997)
Standard Specification forCommercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum),
Cold-Rolled
Standard Specification forPoly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based
onControlled Inside Diameter
Standard Specification forThermal Insulation for Use in Contact with Austenitic Stainless Steel E11998R(1998)
Standard Practices forMounting Test Specimens During Sound Absorption Tests
Standard Practice forStructural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Stormand
Sanitary Sewers and Other Buried Applications
Standard Test Method forFoaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
Standard Practice forInstalling Factory-Made Corrugated Steel Pipe for Sewers and OtherApplications

Standard Specification forGlass Fiber Blanket Insulation (Aircraft Type)

Standard Test Methods ofChemical Analysis of Industrial Metal Cleaning Compositions R(1997)
Standard Guide for Measurementof Gases Present or Generated During Fires
Standard Practice forControlling Quality of Radiological Examination of Electronic Devices E1-1995R(1995)
Standard Test Method forMeasuring Optical Angular Deviation of Transparent Parts
Standard Specification forSteel, Flat Wire, Carbon, Cold-Rolled R(1998)
Standard Test Method for ReboundNumber of Hardened Concrete
Standard Specification forCopper Alloy Permanent Mold Castings for General Applications
Standard Test Method forChlorine in New and Used Petroleum Products (Bomb Method)
Standard Specification forAluminum-Coated (Aluminized) Carbon Steel Wire
Standard Practice for SurfacePreparation of Concrete for Application of Chemical-Resistant ResinMonolithic
Surfacings
Standard Test Method for CrackStrength of Slow-Bend Precracked Charpy Specimens of High-Strength
MetallicMaterials R(1997)
Standard Specification forSurface Discontinuities of Nuts, Inch and Metric Series
Standard Test Method forRubber Deterioration - Crack Growth R(2000)
Standard Test Method for FireTests of Through- Penetration Fire Stops
Standard Test Method forSpecific Optical Density of Smoke Generated by Solid Materials for
AerospaceApplications

Standard Test Method forSulfur in Graphite by Combustion-Iodometric Titration Method E1-1998 R(1998)
Standard Specification forCoppered Carbon Steel Wire E1-1996 R(1996)
Standard Terminology Relatingto Concrete Pipe and Related Products E1-1999
Standard Practice forConducting Tests on Paint and Related Coatings and Materials Using FilteredOpen- Flame
Carbon-Arc Exposure Apparatus
Standard Practice forDetermining Resistance of Solar Collector Covers to Hail by Impact withPropelled Ice
Balls R(1996)
Standard Practice forExamination and Sampling of Hardened Concrete in Constructions
Standard Practices forProducing Films of Uniform Thickness of Paint, Varnish, and Related Productson Test
Panels
Standard Specification forGeneral Requirements for Copper Alloy Castings
Standard Specification forPhase Change-Type Disposable Fever Thermometer for Intermittent Determinationof
Human Temperature
Standard Specification forPlates, Carbon Steel, for Forging and Similar Applications R(1998)

Standard Test Method forChange in Height at Early Ages of Cylindrical Specimens from CementitiousMixtures
E1-1997 R(1997)
Standard Test Method for Low-PressureAir Test of Vitrified Clay Pipe Lines
Standard Test Method forTensile Properties of Paper and Paperboard Using Constant-Rate-OfElongationApparatus
Standard Specification forAlloy Structural Steel Plates
Standard Practice for RubberConditioning for Low- Temperature Testing R(1997)
Standard Specification forLatex Sealants E1-2001
Standard Guide for ModularCoordination of Clay and Concrete Masonary Units R(1999)
Standard Specification forAlloy Steel Socket Button and Flat Countersunk Head Cap Screws
Standard Specification forAlloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
Standard Specification forHigh Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membranefor
Use with Separate Wearing Course
Standard Specification forStainless Steel Metric Nuts
Standard Specification forStyle 1 Stainless Steel Metric Nuts
Standard Specification forStainless Steel Socket Head Cap Screws
Standard Specification forStainless Steel Socket Head Cap Screws (Metric)
Standard Specification forInstallation of Interior Lathing and Furring
Standard Specification forThrusters, Tunnel, Permanently Installed in Marine Vessels R(1998)
Standard Test Methods forMeasuring the Forced Entry Resistance of Sliding Door Assemblies,
ExcludingGlazing Impact
Standard Specification forApplication of Gypsum Veneer Plaster
Standard Specification forApplication of Gypsum Base to Receive Gypsum Veneer Plaster
Standard Specification forWashers, Steel, Plain (Flat), Unhardened for General Use
Standard Specification forMetal Lath R(2000)

Standard Test Method forAcidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and SimilarIndustrial
Aromatic Hydrocarbons R(2000)
Standard Test Method for AcidWash Color of Industrial Aromatic Hydrocarbons
Standard Specification forPost-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer
andDrainage Pipe
Standard Test Method forCopper Strip Corrosion by Industrial Aromatic Hydrocarbons
Standard Test Method forDistillation of Industrial Aromatic Hydrocarbons and Related Materials
Standard Specification forSteel Wire, Carbon, for General Use R(1998)
Standard Test Method forHydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of IndustrialAromatic
Hydrocarbons
Standard Test Methods forSpecific Gravity of Soil Solids by Water Pycnometer
Standard Practice forMechanical Symbols, Shipboard - Heating, Ventilation, and Air Conditioning(HVAC)
Standard Specification forSteel Sheet Piling, Cold Formed, Light Gage

Standard Specification for HotWater Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
Standard Test Methods forManganese in Water
Standard Specification for HotWater Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor
RackType
Standard Test Method forSilica in Water
Standard Test Method for AirErosion of Sprayed Fire- Resistive Materials (SFRMs) Applied to
StructuralMembers R(2000)
Standard Specification forHeat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor
RackType
Standard Practice forDetermining the Consistency of Refactory Castable Using the Ball-in-Hand Test
Standard Specification for HotWater Sanitizing Commercial Dishwashing Machines, Multiple Tank,
RacklessConveyor Type
Standard Specification forHigh-Silicon Iron Pipe and Fittings E1-1994
Standard Specification forCommercial Dishwashing Racks R(1998)
Standard Specification forDense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
Standard Practice for SurfacePreparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb
ShelterPanels
Standard Practice for FiringRefractory Concrete Specimens R(1995)
Standard Test Method forRubber - Deterioration by Heating in Air (Test Tube Enclosure)
Standard Specification forStructural Film Adhesives for Honeycomb Sandwich Panels E1-2000
Standard Specification forCorrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be AdhesivelyBonded
in Honeycomb Shelter Panels
Standard Test Method forEvaluating Degree of Settling of Paint R(1998)
Standard Test Methods ofTesting Cellulose Acetate
Standard Specification forFilter Units, Air Conditioning: Viscous-Impingement Type, Cleanable R(1990)
Standard Test Method forCompressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
Standard Test Method forOxidation Stability of Aviation Fuels (Potential Residue Method) IPDesignation:
138/99; British Standard 4456

Standard Test Method for SulfatedAsh from Lubricating Oils and Additives IP Designation: 163/96;
BritishStandards 4716
Standard Test Methods forNonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
Standard Test Method forDielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
Standard Test Method forInorganic Chlorides and Sulfates in Insulating Oils
Standard Specification forStainless Steel Socket Button and Flat Countersunk Head Cap Screws
Standard Specification forStainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
Standard Practice for Criteriafor Use in Evaluation of Testing Laboratories and Organizations forExamination
and Inspection of Steel, Stainless Steel, and Related A
Standard Specification forStainless Steel Socket-Set Screws
Standard Specification forStainless Steel Socket Set Screws (Metric)
Standard Specification forEpoxy-Resin-Base Bonding Systems for Concrete
Standard Test Method for BondStrength of Epoxy-Resin Systems Used with Concrete by Slant Shear
Standard Test Method forTensile Properties of Thin Plastic Sheeting
Standard Performance andSafety Specification for Cryosurgical Medical Instruments R(1996)
Standard Terminology Relatingto Plastics
Standard Guide forReflected-Light Photomicrography
Standard PerformanceSpecification for Padlocks
Standard Specification forEpoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
Standard Test Method forThermal Compatibility between Concrete and an Epoxy-Resin Overlay
Standard Test Methods for TireCords, Tire Cord Fabrics, and Industrial Filament Yarns Made
fromManufactured Organic-Base Fibers
Standard Test Methods forDissolved Oxygen in Water R(1996)
Standard Test Methods forChemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium
Oxide(Gd2O3) Powder
Standard Test Methods forSpecific Gravity, Apparent, of Liquid Industrial Chemicals R(2000)
Standard Test Method forFoaming Characteristics of Lubricating Oils IP Designation: 146/2000;
BritishStandard 5092
Standard Test Method forInsolubles in Used Lubricating Oils
Standard Test Method for AgarDiffusion Cell Culture Screening for Cytotoxicity E1-1995 R(1995)
Standard Test Method forResistance of Adhesive Bonds to Chemical Reagents
Standard Test Method forTensile Properties of Adhesive Bonds
Standard Test Method forApplied Weight per Unit Area of Dried Adhesive Solids
Standard Practice for AppliedWeight per Unit Area of Liquid Adhesive
Standard Specification forStainless Steel Billet, Bar, and Wire for Surgical Instruments
Standard Specification forPrefabricated Masonry Panels
Standard Test Methods forFlexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used forElectrical
Insulation
Standard Test Method for Peelor Stripping Strength of Adhesive Bonds
Standard Test Method forStrength Properties of Adhesive Bonds in Shear by Compression Loading

Standard Test Method forStrength Properties of Adhesives in Plywood Type Construction in Shear byTension
Loading
Standard Specification forLetters and Numerals for Ships R(1998)
Standard Specification forSteel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, StructuralQuality
Standard Specification forStainless Steel Needle Tubing R(1998)
Standard Test Method for KnockCharacteristics of Aviation Gasolines by the Supercharge Method
IPDesignation: 119/96
Standard Specification forAviation Gasolines
Standard Specification forGlass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
Standard Specification forCuprous Oxide for Use in Antifouling Paints R(1999)
Standard Specification forAlloy Steel Socket Set Screws
Standard Specification forAlloy Steel Socket Set Screws (Metric)
Standard Specification forPrecast Concrete Water and Wastewater Structures
Standard Test Methods forEthylcellulose
Standard Specification forAdhesives for Duct Thermal Insulation E1-1996 R(1996)
Standard Specification forCommercial Food Waste Disposers R(1998)
Standard Test Method for BlockingResistance of Paper and Paperboard TAPPI T 477 m-47
Standard Specification forNoncarbonated Mechanically Refrigerated, Beverage Dispenser (Visible Product)
Standard Specification forSlicing Machines, Food, Electric
Standard Specification forMinimum Performance and Safety Requirements for Resuscitators Intended forUse
with Humans R(1999)
Standard Practice forDetermining the Properties of Jacketing Materials for Thermal InsulationR(1996)
Standard Definitions of TermsRelating to Hemostatic Forceps R(1996)
Standard Specification forNonrigid Vinyl Chloride Polymer Tubing
Standard Specification forResilient Connectors between Reinforced Concrete Manhole Structures, Pipes,and
Laterals
Standard Practice for SamplingElectrical Insulating Liquids
Standard Practice for TestingConcrete Pipe Sewer Lines by Low-Pressure Air Test Method R(1997)
Standard Test Method forDissipation Factor (or Power Factor) and Relative Permittivity (DielectricConstant) of
Electrical Insulating Liquids E1-1999
Standard Test Method forResistance to Chemicals of Resilient Flooring
Standard Test Method forRubber Property - Plasticity and Recovery (Parallel Plate Method)
Standard Specification forBorax R(1997)
Standard Classification ofPotential Health and Safety Concerns Associated with Thermal InsulationMaterials
and Accessories
Standard Test Methods forEstimating the Largest Grain Observed in a Metallographic Section (ALA GrainSize)
Standard Specification forExterior Gypsum Soffit Board
Standard Specification forSurface-Applied Bonding Compounds for Exterior Plastering
Standard Specification forSerological Pipet, Disposable Plastic R(1998)

Standard Specification forGrout Fluidifier for Preplaced-Aggregate Concrete

Standard Test Method for ConePenetration of Petrolatum IP Designation: 179/79(95); British Standard 4698
Standard Test Method forCongealing Point of Petroleum Waxes, Including Petrolatum IP Designation:76/95;
British Standard 5088 R(1998)
Standard Test Method for Flowof Grout for Preplaced- Aggregate Concrete (Flow Cone Method)
Standard Practice for QualityControl Receipt Inspection Procedures for Protective Coatings (Paint), Usedin
Marine Construction and Shipbuilding
Standard Practice forInspection of Marine Surface Preparation and Coating Application
Standard Test Method forCompressive Strength of Grouts for Preplaced-Aggregate Concrete in theLaboratory
Standard Test Method forOxidation Stability of Lubricating Greases by the Oxygen Bomb Method IP
Designation:142/85 (92); E1-1995 R(1995)
Standard Test Method forOxidation Characteristics of Inhibited Mineral Oils British Standard 4388
Standard Test Methods forRubber Properties in Compression or Shear (Mechanical Oscillograph) R(1997)
Standard Specification forPenetration-Graded Asphalt Cement for Use in Pavement Construction R(1999)
Standard Specification forPoly(Vinyl Chloride)(PVC) Corrugated Sewer Pipe with a Smooth Interior
andFittings
Standard Test Method forImpact Strength of Adhesive Bonds
Standard Test Method for WaterResistance of Shipping Containers by Spray Method
Standard Test Method for BondStrength of Mortar to Masonry Units E1-1997 R(1997)
Standard Specification forMixing Machines, Food, Electric
Standard Test Method forBearing Strength of Plastics
Standard Specification forSteel Drill Screws for the Application of Gypsum Panel Products or MetalPlaster
Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in.
Standard Test Method forMeasuring Shrinkage from Mold Dimensions of Thermoplastics
Standard Specification forGong, Sound Signaling R(1996)
Standard Specification forCompressible-Washer-Type Direct Tension Indicators for Use with
StructuralFasteners [Metric]
Standard Specification forPredecorated Gypsum Board
Standard Specification forMedical and Surgical Suction and Drainage Systems R(2000)
Standard Guide for Lock-StripGasket Glazing R(1997)
Standard Specification forRigid Laryngoscopes for Tracheal Intubation - Hook-On Fittings forLaryngoscope
Handles and Blades with Lamps
Standard Guide for InstallingAsbestos-Cement Nonpressure Pipe
Standard Specification forChemical Passivation Treatments for Stainless Steel Parts E1-2000
Standard Test Methods forAbrasion Resistance of Organic Coatings by Falling Abrasive
Standard Practice forInfiltration and Exfiltration Acceptance Testing of Installed PrecastConcrete Pipe Sewer
Lines R(2000)
Standard Test Method forLaboratory Determination of Degree of Bleeding of Traffic Paint R(1998)
Standard Specification forGlass Volumetric (Transfer) Pipets R(1999)
Standard Test Method forInterfacial Tension of Oil Against Water by the Ring Method

Standard Test Method forEvaporation Loss of Lubricating Greases and Oils

Standard Test Method for Acidand Base Number by Color- Indicator Titration IP Designation: 139/98;
BritishStandard 2634
Standard Specification forDiesel Fuel Oils
Standard Test Methods forCalculated Cetane Index of Distillate Fuels IP Designation: 364/84; E1-2000R(2000)
Standard Specification forQuicklime and Hydrated Lime for Soil Stabilization
Standard Specification forEmulsified Asphalt
Standard Practice for SamplingBituminous Paving Mixtures
Standard Specification forGround Granulated Blast- Furnace Slag for Use in Concrete and Mortars
Standard Specification forCore-Splice Adhesive for Honeycomb Sandwich Structural Panels
Standard Test Method forRubber Property - Volume Resistivity of Electrically Conductive andAntistatic
Products E1-2000 R(2000)
Standard Specification forValve Locking Devices E1- 1996 R(1996)
Standard Specification forPreformed Expansion Joint Filler for Concrete (Bituminous Type)
Standard Test Method for Timeof Flow of Fiber- Reinforced Concrete Through Inverted Slump Cone
Standard Specification forMixing Plants for Hot- Mixed, Hot-Laid Bituminous Paving Mixtures
Standard Terminology ofPackaging and Distribution Environments
Standard Test Method forPressure-Sensitive Adhesive- Coated Tapes Used for Electrical and
ElectronicApplications
Standard Practice for PipingSystem Drawing Symbols
Standard Practice forDetection and Evaluation of Discontinuities by the Immersed Pulse-EchoUltrasonic
Method Using Longitudinal Waves
Standard Specification forSteel Self-Piercing Tapping Screws for the Application of Gypsum PanelProducts or
Metal Plaster Bases to Wood Studs or Steel Studs
Standard Test Method forApparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimensby
Tension Loading (Metal-To-Metal)
Standard Test Method for Hazeand Luminous Transmittance of Transparent Plastics
Standard Test Method forInitial Tear Resistance of Plastic Film and Sheeting
Standard Practice forDetermining Electrical Conductivity Using the Electromagnetic (Eddy-Current)Method
Standard Test Method forMeasurement of Dry-Film Thickness of Organic Coatings Using Micrometers
Standard Practice forConducting Exterior Exposure Tests of Paints on Wood
Standard Test Method forDetermining Total Nitrogen in Resins and Plastics R(1998)
Standard Practice forConducting Exterior Exposure Tests of Paints on Steel
(Withdrawn) StandardSpecification for Flashlights on Vessels
Standard Practice forInstallation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
Standard Specification forChemical Admixtures for Use in Producing Flowing Concrete

Standard Test Method forFlexural Toughness and First- Crack Strength of Fiber-Reinforced Concrete(Using
Beam with Third-Point Loading)
Standard Test Method forHydrogen in Petroleum Fractions

Standard Test Method forSampling and Testing Grout

Standard Test Methods forDetermination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron,Nickel,
and Cobalt Alloys
Standard Specification forFeeders, Detergent, Rinse Agent, and Sanitizing Agent for CommercialDishwashing
and Glasswashing Machines
Standard Specification forDispensers, Powdered Iced Tea
Standard Specification forGeneral Workmanship and Performance Measurements of Hemostatic
ForcepsR(1996)
Standard Specification forSpray-Applied Rigid Cellular Polyurethane Thermal Insulation
Standard Test Method for FiberAnalysis of Paper and Paperboard TAPPI T 401 om-88 R(1999)
Standard Specification forFlat Glass R(1997)
Standard Classification forAcoustically Absorptive Materials Applied by Trowel or Spray E1-1997 R(1997)
Standard Test Method forStiffness Properties of Plastics as a Function of Temperature by Means of aTorsion
Test
Standard Specification forPipets, Milk and Cream Examination
Standard Test Method forResistance of Transparent Plastics to Surface Abrasion
Standard Specification forGlass Serological Pipets (General Purpose and Kahn)
Standard Specification forAccessories for Gypsum Wallboard and Gypsum Veneer Base
Standard Specification forPoly(Vinyl Chloride) Jacket for Wire and Cable
Standard Specification forFrying and Braising Pans, Tilting Type
Standard Specification forHeat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass
Standard Specification forRubber Insulating Blankets
Standard Specification forRubber Insulating Covers
Standard Specification forRubber Insulating Line Hose R(1999)
Standard Test Method forMeasuring Rubber Deterioration - Cut Growth Using Ross Flexing ApparatusE1-1999
R(1999)
Standard Specification forBorosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV)Applications
Standard Test Methods forRubber Property - Stiffening at Low Temperatures: Flexible Polymers andCoated
Fabrics R(1997)
Standard Test Method forRubber Property - Resilience Using a Rebound Pendulum R(2000)
Standard Specifications forFlexible Cellular Materials - Latex Foam
Standard Specification forFlexible Cellular Materials - Sponge or Expanded Rubber
Standard Test Method for YarnNumber Based on Short- Length Specimens
Standard Test Method for CleavageStrength of Metal-to- Metal Adhesive Bonds E1-1997
Standard Specification forInstallation of Lathing and Furring to Receive Interior and Exterior PortlandCementBased Plaster
Standard Test Method forTemperature of Freshly Mixed Portland Cement Concrete

Standard Test Methods for Ironin Rosin Tall Oil Fatty Acids and Other Related Products
Standard Test Method for Waterin Organic Liquids by Coulometric Karl Fischer Titration

Standard Specification forVinyl Composition Floor Tile

Standard Test Methods forAcidity or Alkalinity of Water R(1996)
Standard Test Methods for Ironin Water
Standard Specification forFibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
Standard Test Method forMeasurement of Masonry Flexural Bond Strength
Standard Specification forFine Aggregate for Bituminous Paving Mixtures
Standard Test Method forEffect of Water on Compressive Strength of Compacted Bituminous
MixturesAASHTO No. T165 R(2000)
Standard Specification forRubber - Concentrated, Ammonia Preserved, Creamed, and Centrifuged
NaturalLatex
Standard Practice forLaboratories Testing Concrete and Concrete Aggregates for Use in Constructionand
Criteria for Laboratory Evaluation
Standard Test Method forDistillation Range of Volatile Organic Liquids IP Designation: 195/81
Standard Terminology forSurgical Scissors - Inserted and Non-Inserted Blades R(1998)
Standard Specification forInserted and Noninserted Surgical Scissors R(1998)
Standard Specification forPipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
Standard Test Methods forViscosity of Adhesives
Standard Specification forSpun Cast Prestressed Concrete Poles
Standard Test Methods forPhosphorus in Lubricating Oils and Additives
Standard Specification forNonmetallic Honeycomb Core for Use in Shelter Panels
Standard Test Method forMeasuring Apparent Viscosity of Lubricating Greases
Standard Test Method forAcidity of Hydrocarbon Liquids and Their Distillation Residues
Standard Test Method for WaterReaction of Aviation Fuels
Standard Specification forPharmaceutical Glass Graduates
Standard Specification forCommon Laboratory Glass Funnels
Standard Specification forLiquid Caustic Soda (Sodium Hydroxide Solution) R(1997)
Standard Specification forSoda Ash, Anhydrous (Sodium Carbonate, Anhydrous)
Standard Specification forPackaged Dry, Hydraulic- Cement Grout (Nonshrink)
Standard Specification forFiber-Reinforced Concrete and Shotcrete
Standard Test Methods forEvaluating Nonwoven Fabrics
Standard Test Method forPercent Ash Content of Engine Coolants and Antirusts
Standard Specification forIndustrial Grade Ethylene Glycol
Standard Test Method forBoiling Point of Engine Coolants R(1998)
Standard Test Method forReserve Alkalinity of Engine Coolants and Antirusts
Standard Test Method forDensity or Relative Density of Engine Coolant Concentrates and EngineCoolants by
the Hydrometer
Standard Test Methods forWater in Engine Coolant Concentrate by the Karl Fischer Reagent Method
Standard Specification for Non-MetallicExpansion Joints R(1998)
Standard Test Methods forElectrical Conductivity and Resistivity of Water R(1999)
Standard Test Method forHardness in Water
Standard Specification forFlexible, Low Permeance Vapor Retarders for Thermal Insulation
Standard Specification forSpray Shields for Mechanical Joints
Standard Specification forAggregate for Single or Multiple Bituminous Surface Treatments

Standard Test Methods for Amountof Material in Soils Finer Than the No. 200 (75-Micrometer) Sieve
Standard Practice for thePreparation of Substitute Ocean Water E1-1999
Standard Test Method for WaterVapor Content of Gaseous Fuels by Measurement of Dew-Point
TemperatureR(2000)
Standard Test Method for Pilesunder Static Axial Compressive Load E1-1994 R(1994)
Standard Specification forTurnbuckles, Swaged, Welded, Forged R(1996)
Standard Test Method forBlocking Point of Potentially Adhesive Layers
Standard Specification forMuriatic Acid (Technical Grade Hydrochloric Acid)
Standard Test Method forRubber Deterioration - Surface Ozone Cracking in a Chamber
Standard Practice for Effectof Moisture and Temperature on Adhesive Bonds
Standard Specification forMethyl Isobutyl Ketone R(1997)
Standard Terminology Relatingto Product Counterfeit Protection Systems
Standard Specification forSampling and Testing of Reusable Laboratory Glassware R(1996)
Standard Test Method forBromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins
byElectrometric Titration IP Designation: 130/98
Standard Test Method forDistillation of Petroleum Products at Reduced Pressure
Standard Test Method forFlexural Strength of Advanced Ceramics at Ambient Temperature R(1996)
Standard Practice for HumanEngineering Design for Marine Systems, Equipment and Facilities R(2000)
Standard Test Method forSpecific Resistance (Resistivity) of Electrical Insulating Liquids
Standard Test Method forRubber Deterioration - Surface Ozone Cracking Outdoors or Chamber
(TriangularSpecimens)
Standard Guide for pH ofAqueous Solutions of Soaps and Detergents
Standard Practice for Samplingand Preparing Aqueous Solutions of Engine Coolants or Antirusts for
TestingPurposes
Standard Test Method forFreezing Point of Aqueous Engine Coolants R(1998)
Standard Test Methods forFluoride Ion in Water
Standard Test Method forMeasurement of Surface Layer Thickness by Radial Sectioning R(1998)
Standard Specification forAnodes, Sacrificial Zinc Alloy R(1996)
Standard Test Methods forResistance of Adhesives to Cyclic Laboratory Aging Conditions E1-1997
Standard Test Method forFlexural Strength of Adhesive Bonded Laminated Assemblies
Standard Test Methods forPallets and Related Structures Employed in Materials Handling and Shipping
Standard Test Methods forNondestructive Measurement of Dry Film Thickness of Nonmagnetic
CoatingsApplied to a Ferrous Base
Standard Test Method for BulkSpecific Gravity and Density of Compacted Bituminous Mixtures Using
CoatedSamples E1-1998
Standard Specification forConcrete Joint Sealer, Hot- Applied Elastic Type
Standard Guide for theMeasurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiationof
Semiconductor Devices
Standard Specification forReagent Water
Standard Test Method forBearing Capacity of Soil for Static Load and Spread Footings
Standard Specification forCalcium Carbonate Pigments R(1999)
Standard Test Method forViscosity by Ford Viscosity Cup R(1999)

Standard Test Methods forVolatile Loss from Plastics Using Activated Carbon Methods E1-1999 R(1999)
Standard Test Method for LinearDimensional Changes of Nonrigid Thermoplastic Sheeting or Film at
ElevatedTemperature
Standard Test Methods forCommon Properties of Certain Pigments
Standard Test Method for Colorof Clear Liquids (Platinum-Cobalt Scale)
Standard Test Method forFineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
Standard Test Method for SieveAnalysis of Glass Spheres E1-1994 R(1994)
Standard Test Method forDensity and Relative Density (Specific Gravity) of Liquids by BinghamPycnometer
R(1998)
Standard Specification forCooker, Steam R(1997)
Standard Test Method forRefractive Index and Refractive Dispersion of Hydrocarbon Liquids
Standard Test Method forThermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal
Heat Flow Technique
Standard Specification forEmulsified Asphalt Used as a Protective Coating for Roofing R(2000)
Standard Test Method forRubber Property - Compression Set at Low Temperatures E1-1998 R(1997)
Standard Guide for InstallingBonded Resistance Strain Gages R(1998)
Standard Specification forCommercial Dishwashing Machines, Multiple-Tank, Continuous OvalConveyorType, Heat Sanitizing R(1998)
Standard Test Method for MeltFlow Rates of Thermoplastics by Extrusion Plastometer
Standard Specification forMaterials for Soil- Aggregate Subbase, Base, and Surface Courses
Standard Test Methods forResistance of Plastic Materials to Abrasion
Standard Specification forCuffed and Uncuffed Tracheal Tubes E1-1997
Standard Test Method forBromide Ion in Water R(1999)
Standard Practice forMinimizing Dosimetry Errors in Radiation Hardness Testing of SiliconElectronic Devices
Using Co-60 Sources
Standard Guide for PetroleumMeasurement Tables API Standard: API MPMS Ch.11.1; IP Designation:
200/80(90); BSI Handbook; E1-1997 R(1997)
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume I Table 5A - Generalized Crude Oils Correction of Observ
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume II Table 5B - Generalized Products Correction of Observe
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume III Table 6C - Volume Correction Factors for Individual
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume IV Table 23A - Generalized Crude Oils Correction of Obse
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume V Table 23B - Generalized Products Correction of Observe
Standard Test Method forOptical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys bythe
Argon Atmosphere, Point-To-Plane, Unipolar Self- Initiating Ca
Standard Test Methods forChemical Oxygen Demand (Dichromate Oxygen Demand) of Water
Standard Test Method forResidual Chlorine in Water R(1996)
Standard Test Methods forNonvolatile Content of Resin Solutions R(1994)
Standard Test Method forLeakage Tendencies of Automotive Wheel Bearing Greases R(1999)

Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume VI Table 24C - Volume Correction Factors for Individual
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume VII Table 53A - Generalized Crude Oils Correction of Obs
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume VIII Table 53B - Generalized Products Correction of Obse
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume IX Table 54C - Volume Correction Factors for Individual
Standard Test Method forDetermining the Water Washout Characteristics of Lubricating Greases
Standard Classification forAcoustical Ceiling Products
Standard Test Method forSulfur in Petroleum Products (Lamp Method) IP Designation: 107/86
Standard Specification forMetal, Expanded, Steel R(1997)
Standard Specification forPentachlorophenol E1-1997 R(1997)
Standard Test Method forCorrosive Sulfur in Electrical Insulating Oils IP Designation: 315/86
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction
FactorsVolume X - Background, Development, and Program Documentation E
Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Intraconversion
betweenVolume Measures and Density Measures Volume XI/XII Volume XI - Ta
Standard Guide for PetroleumMeasurement Tables Manual of Petroleum Measurement Standards Chapter 11.1
-Volume Correction Factors Volume XIII Table 5D - Generalized
Standard Guide for PetroleumMeasurement Tables Manual of Petroleum Measurement Standards Chapter 11.1
-Volume Correction Factors Volume XIV Table 53D - Generalized
Standard Test Method forPerformance of Griddles
Standard Test Method for pH ofEngine Coolants and Antirusts E1-1998 R(1997)
Standard Specification forFaced Rigid Cellular Polyisocyanurate Thermal Insulation Board ReplacesC984-94
and C1013-94
Standard Test Methods for pHof Water
Standard Test Method for Odorof Volatile Solvents and Diluents R(1996)
Standard Test Method forDensity, Relative Density (Specific Gravity), or API Gravity of CrudePetroleum and
Liquid Petroleum Products by Hydrometer Method API Design
Standard Test Methods forChemical Analysis of White Lead Pigments R(1999)
Standard Test Method forPhthalic Anhydride Content of Alkyd Resins and Esters Containing OtherDibasic
Acids (Gravimetric) E1-1996 R(1996)
Standard Test Method forEffect of Household Chemicals on Clear and Pigmented Organic Finishes R(1998)
Standard Test Method for FlashPoint and Fire Point of Liquids by Tag Open-Cup Apparatus E1-1997 R(1997)
Standard Specification forBrick, Insulating, High Temperature, Fire Clay R(1997)
Standard Test Method forHydrocarbon Types in Liquid Petroleum Products by Fluorescent IndicatorAdsorption
IP Designation: 156/97
Standard Reference Radiographsfor Titanium Castings
Standard Test Method forNeedle Penetration of Petroleum Waxes
Standard Test Method for SmokePoint of Kerosine and Aviation Turbine Fuel IP Designation: 57/95

Standard Specification forStainless Steel Suture Needle Holders - General Workmanship Requirements
andCorresponding Test Methods R(1996)
Standard Specification forBitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
Standard Specification forRubber Sheet Gaskets R(2000)
Standard Practice for Use ofSI (Metric) Units in Maritime Applications (Committee F-25 Supplement
toIEEE/ASTM SI 10)
Standard Test Method for TuftBind of Pile Yarn Floor Coverings Discontinued November 1995 and Reinstated
Standard Practice for WorkingLife of Liquid or Paste Adhesives by Consistency and Bond Strength
Standard Test Method forViscosity of Cellulose Derivatives by Ball-Drop Method R(2000)
Standard Specification forRubber Floor Tile
Standard Specification forManually Operated Fueling Hose Reels R(1996)
Standard Test Methods forMoisture in Cellulose R(1998)
Standard Practice for Rubber -Standard Temperatures for Testing
Standard Test Method forNonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer,and Related
Products E1-2000 R(2000)
Standard Specification forOvens, Microwave, Electric R(1999)
Standard Test Method forPermanganate Time of Acetone and Methanol R(1997)
Standard Test Method for Waterin Volatile Solvents (Karl Fischer Reagent Titration Method) R(1999)
Standard Practice forReporting Particle Size Characteristics of Pigments R(1997)
Standard Practice forQuantities of Materials for Bituminous Surface Treatments R(2000)
Standard Specification forPressure-Reducing Valves for Water Systems, Shipboard
Standard Test Method forHydrazine in Water R(2001)
Standard Test Method for AcidNumber (Empirical) of Synthetic and Natural Waxes
Standard Test Method forStiffness of Fabrics E1-1999
Standard Practice for AngleResolved Optical Scatter Measurements on Specular or Diffuse Surfaces
Standard Test Methods forChemical Analysis of White Titanium Pigments R(1999)
Standard Test Method forUnsaponifiable Matter in Alkyd Resins and Resin Solutions R(1998)
Standard Test Method for FattyAcid Content of Alkyd Resins and Alkyd Resin Solutions R(1998)
Standard Test Method forNondestructive Measurement of Dry Film Thickness of Nonconductive
CoatingsApplied to a Nonferrous Metal Base
Standard Test Method for WaterSeparability of Petroleum Oils and Synthetic Fluids
Standard Test Methods for ConePenetration of Lubricating Grease Using One-Quarter and One-Half Scale
ConeEquipment IP Designation: 310/84 (92)
Standard Test Method forEstimation of Net Heat of Combustion of Aviation Fuels
Standard Test Methods forRubber O-Rings R(1999)
Standard Test Method forRubber Property - International Hardness R(1999)
Standard Practice for LiquidPenetrant Examination
Standard Practice for Rubberand Rubber Latices - Nomenclature
Standard Test Method for Twistin Yarns by Direct- Counting
Standard Test Method forTearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
Standard Test Methods forAmmonia Nitrogen in Water
Standard Classification Systemfor Polychlorotrifluoroethylene (PCTFE) Plastics

Standard Practice for OutdoorWeathering of Plastics

Standard Guide for ComputedTomography (CT) Imaging
Standard Practice for MagneticParticle Examination
Standard Test Method forMicronaire Reading of Cotton Fibers
Standard Guide for Selectionof Security Technology for Protection Against Counterfeiting,
Alteration,Diversion, Duplication, Simulation, and Substitution (CADDSS) o
Standard Practice for SoilInvestigation and Sampling by Auger Borings R(2000)
Standard Test Method forRubber Property - Elongation at Specific Stress E1-1991 R(1996)
Standard Specification forCaustic Potash; Solid (Potassium Hydroxide; Solid)
Standard Test Methods forFully Cured Silicone Rubber- Coated Glass Fabric and Tapes for ElectricalInsulation
Standard Test Method forMoisture or Volatile Distillates in Bituminous Paving Mixtures R(2001)
Standard Test Method forDensity of Liquid Coatings, Inks, and Related Products
Standard Test Method forHeptane Miscibility of Lacquer Solvents R(2000)
Standard Test Method forLow-Temperature Torque of Ball Bearing Grease R(1997)
Standard Test Method for OilAbsorption of Pigments by Gardner-Coleman Method
Standard Test Method for AmylaceousMatter in Adhesives
Standard Test Method forNonvolatile Content of Aqueous Adhesives
Standard Test Method forSolidification Point of Industrial Organic Chemicals
Standard Test Method forDiffuse Light Transmission Factor of Reinforced Plastics Panels
Standard Practice for FilteredOpen-Flame Carbon-Arc Exposures of Plastics
Standard Test Method for ASTMColor of Petroleum Products (ASTM Color Scale) IP Designation: 196/97
Standard Test Method forDensity of Plastics by the Density-Gradient Technique
Standard Test Methods forCarbon Black - Ash Content
Standard Test Methods forCarbon Black - Heating Loss R(2000)
Standard Test Method forCarbon Black - Iodine Adsorption Number
Standard Test Methods forCarbon Black - pH Value R(2000)
Standard Test Method forCarbon Black, Pelleted - Pour Density E1-1999
Standard Test Method for Widthof Leather
Standard Test Method for VicatSoftening Temperature of Plastics
Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Plastic Pipe, Schedules 40 and 80
Standard Test Method for Waterin Insulating Liquids by Coulometric Karl Fischer Titration
Standard Practice forSpecifying Color by the Munsell System
Standard Test Method for Colorof Transparent Liquids (Gardner Color Scale)
Standard Test Method forViscosity of Transparent Liquids by Bubble Time Method
Standard Test Method forSulfur in Petroleum Products (High-Temperature Method)
Standard Test Method forCalculation of Volume and Weight of Industrial Aromatic Hydrocarbons R(2000)
Standard Test Method forDensity and Unit Weight of Soil in Place by the Sand-Cone Method
Standard Test Methods forLaboratory Compaction Characteristics of Soil Using Modified Effort (56,000ftlbf/ft3 (2,700 kN-m/m3))1
Standard Specification forCellulose Acetate Propionate Molding and Extrusion Compounds

Standard Practice for ComputedTomographic (CT) Examination

Standard Test Methods forLinear Density of Textile Fibers
Standard Test Method forBreaking Strength of Yarn in Skein Form
Standard Test Method forFiller Content of Phenol, Resorcinol, and Melamine Adhesives
Standard Test Method forPenetration Test and Split- Barrel Sampling of Soils
Standard Practice forThin-Walled Tube Sampling of Soils for Geotechnical Purposes
Standard Test Method forDynamic Shock Cushioning Characteristics of Packaging Material
Standard Test Method forTime-To-Failure of Plastic Pipe under Constant Internal Pressure
Standard Test Method forResistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, andFittings
Standard Terminology forAbbreviated Terms Relating to Plastics
Standard Specification forKettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or WallMounted, Direct
Connected, Gas Fired and Electric Fired
Standard Test Method forCarbon Black in Olefin Plastics
Standard Specification forKettles, Steam-Jacketed, 32 Oz to 20 Gal (1 to 75.7 L), Tilting, TableMounted, Direct
Connected, Gas Fired and Electric Fired
Standard Specification forFreezers, Ice Cream, Soft Serve, Shake
Standard Test Method forNitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) E12000R(2000)
Standard Test Method forOxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic
AcidProcedures)
Standard Test Method forCorrosion Produced by Leather in Contact with Metal
Standard Test Method forAcidity in Volatile Solvents and Chemical Intermediates Used in Paint,Varnish,
Lacquer, and Related Products R(1999)
Standard Test Method forAlkalinity in Acetone R(1999)
Standard Test Method for EsterValue of Solvents and Thinners R(1996)
Standard Test Methods forCarbon Black - Sulfur Content
Standard Test Method forCompressive Properties of Rigid Cellular Plastics
Standard Test Method forApparent Density of Rigid Cellular Plastics
Standard Test Method forTensile and Tensile Adhesion Properties of Rigid Cellular Plastics R(1995)
Standard Specification forChromated Copper Arsenate R(2000)
Standard Guide for IncludingGovernment Procurement Requirements in ASTM Documents R(1999)
Standard Test Method forRubber Property - Abrasion Resistance (Footwear Abrader) R(2000)
Standard Test Method for Waterin Phenol and Related Materials by the Iodine Reagent Method
Standard Practice for Makingand Curing Soil-Cement Compression and Flexure Test Specimens in
theLaboratory
Standard Test Methods forCompressive Strength of Molded Soil-Cement Cylinders
Standard Test Method for AcidValue of Organic Coating Materials E1-1996 R(1996)
Standard Test Methods forDrying, Curing, or Film Formation of Organic Coatings at Room
TemperatureR(1999)
Standard Test Methods for Rubber-Viscosity,Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney
Viscometer)
Standard Test Methods forResistance of Dried Films of Varnishes to Water and Alkali E1-1996 R(1996)
Standard Test Methods forEpoxy Content of Epoxy Resins
Standard Test Methods forWater Vapor Transmission of Organic Coating Films E1-1999 R(1999)

Standard Test Method forEvaluation of Painted or Coated Specimens Subjected to Corrosive

EnvironmentsR(2000)
Standard Specification forFlexible Cellular Materials - Vinyl Chloride Polymers and Copolymers(Closed-Cell
Foam)
Standard Specification forDriven Fasteners: Nails, Spikes, and Staples
Standard Specification for GlassFabrics (Woven and Treated) for Roofing and Waterproofing
Standard Guide for ComputedTomography (CT) System Selection R(2001)
Standard Test Methods forPolytetrafluoroethylene Tubing
Standard Test Methods for Chromiumin Water R(1996)
Standard Test Methods forCopper in Water
Standard Test Methods for Zincin Water
Standard Test Method forEnvironmental Stress-Cracking of Ethylene Plastics
Standard Specification forSolid Vinyl Floor Tile
Standard Test Method forTensile Properties of Plastics by Use of Microtensile Specimens
Standard Test Methods forImpact Resistance of Plastic Film by the Free-Falling Dart Method
Standard Specification forExtruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and HeavyWalled Tubing
Standard Specification forIsobutyl Acetate (95% Grade)
Standard Specification forIsobutyl Alcohol R(1999)
Standard Test Method forDilution Ratio of Active Solvents in Cellulose Nitrate Solutions R(2000)
Standard Test Method for WaterMiscibility of Water- Soluble Solvents
Standard Test Methods forHydrolyzable Chloride Content of Liquid Epoxy Resins R(1996)
Standard Practice for VisualAppraisal of Colors and Color Differences of Diffusely-Illuminated
OpaqueMaterials
Standard Practices forPreparation of Aluminum and Aluminum-Alloy Surfaces for Painting R(1998)
Standard Practices forPreparation of Magnesium Alloy Surfaces for Painting R(1998)
Standard Practice for MakingCementitious Panels for Testing Coatings R(1998)
Standard Practice for TestingWater Resistance of Coatings Using Water Fog Apparatus
Standard Test Method forLuminometer Numbers of Aviation Turbine Fuels
Standard Test Method for OilSeparation from Lubricating Grease During Storage E1-2000 R(2000)
Standard Practice forRadiographic Examination
Standard Test Method forTransparency of Plastic Sheeting
Standard Test Method forRefractive Index of Viscous Materials
Standard Test Method for RustProtection by Metal Preservatives in the Humidity Cabinet IP
Designation:366/84
Standard Specification forPreformed Expansion Joint Filler for Concrete Paving and StructuralConstruction
(Nonextruding and Resilient Bituminous Types)
Standard Specification forPreformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Pavingand
Structural Construction E1-1996 R(1996)
Standard Specification forEpoxy Resins
Standard Classification Systemfor Carbon Blacks Used in Rubber Products
Standard Practice forConditioning and Testing Textiles E1-July 2000
Standard Specification forAdhesive for Acoustical Materials Discontinued 1993 and Reinstated

Standard Practice forConducting Creep Tests of Metal- To-Metal Adhesives

Standard Test Method forClimbing Drum Peel for Adhesives
Standard Guide for Performanceof an Ice Rescuer - Level 11
Standard Specification forRigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride)
(CPVC) Compounds
Standard Specification forPoly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
Standard Test Method forBrittleness Temperature of Plastic Sheeting by Impact
Standard Specification forAutomatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air
orNitrogen Service
Standard Test Method for Waterand Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
IPDesignation: MPMS Chapter 10.6; British Standard 2882
Standard Practice for CarbonBlack - Sampling Packaged Shipments R(1997)
Standard Test Method forMeasuring Thickness of Leather Test Specimens
Standard Test Method forMeasuring Thickness of Leather Units R(2000)
Standard Test Method for WaterAbsorption (Static) of Vegetable Tanned Leather
Standard Test Method forApparent Viscosity of Plastisols and Organosols at Low Shear Rates
Standard Test Method forThermal Endurance of Flexible Sheet Materials Used for Electrical Insulationby the
Curved Electrode Method
Standard Test Method for RollStability of Lubricating Grease
Standard Test Method forNaphthalene Hydrocarbons in Aviation Turbine Fuels by
UltravioletSpectrophotometry
Standard Test Methods forChemical Analysis of Strontium Chromate Pigment R(1999)
Standard Test Method forPackage Stability of Paint
Standard Specification forJet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type
Standard Test Method forFusibility of Coal and Coke Ash R(2000)
Standard Specification forMineral Aggregate Used on Built-Up Roofs R(2000)
Standard Test Method forMoisture in Mineral Aggregate Used on Built-Up Roofs E1 R(1999)
Standard Test Method forDetection and Measurement of Partial Discharge (Corona) Pulses in Evaluationof
Insulation Systems R(1998)
Standard Specification forRubber Rings for Asbestos- Cement Pipe R(2000)
Standard Test Method forDensity of Adhesives in Fluid Form
Standard Test Method forFoaming Tendencies of Engine Coolants in Glassware
Standard Test Method for CBR(California Bearing Ratio) of Laboratory-Compacted Soils
Standard Test Method forTurbidity of Water
Standard Test Method for BetaParticle Radioactivity of Water
Standard Test Method forStatic and Kinetic Coefficients of Friction of Plastic Film and Sheeting
Standard Test Methods forApparent Density, Bulk Factor, and Pourability of Plastic Materials
Standard Test Method forLinear Density of Yarn (Yarn Number) by the Skein Method
Standard Test Methods forRubber Property - Shrinkage of Raw and Compounded Hot-Polymerized StyreneButadiene Rubber (SBR)
Standard Test Methods forParticle Size (Sieve Analysis) of Plastic Materials
Standard Test Method for PropagationTear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
Standard Practice forPreparation of Compression- Molded Polyethylene Test Sheets and TestSpecimens

Standard Test Method forDetermining Ignition Temperature of Plastics

Standard Test Method forThermal Endurance of Flexible Electrical Insulating Varnishes
Standard Test Method for AlphaParticle Radioactivity of Water
Standard Test Method forAcetone Tolerance of Heat- Bodied Drying Oils E1-1995 R(1995)
Standard Test Method for Ashin Drying Oils and Fatty Acids E1-1995 R(1995)
Standard Test Method forQuantitative Determination of Break in Drying Oils E1-1995 R(1995)
Standard Test Method for Footsin Raw Linseed Oil (Volumetric Method) E1-1995 R(1995)
Standard Test Method forHydroxyl Value of Fatty Oils and Acids E1-1995 R(1995)
Standard Test Method forIodine Value of Drying Oils and Fatty Acids
Standard Test Method for Losson Heating of Drying Oils E1-1995 R(1995)
Standard Test Method forSaponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty
AcidsR(1995)
Standard Test Method forSpecific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at25/25
Degrees C R(1996)
Standard Test Method for TungOil Quality E1-1995 R(1995)
Standard Test Method forUnsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized FattyAcids
R(1998)
Standard Terminology Relatingto Paper and Paper Products
Standard Practice for Methodsof Closing, Sealing, and Reinforcing Fiberboard Boxes
Standard Test Method for AcidValue of Fatty Acids and Polymerized Fatty Acids R(1998)
Standard Test Method for FattyAcid Composition by Gas- Liquid Chromatography of Methyl Esters E11995R(1995)
Standard Test Methods forEvaluation of Total Sulfation Activity in the Atmosphere by the Lead
DioxideTechnique
Standard Practice of PreparingCoal Samples for Analysis
Standard Test Methods ofSampling and Chemical Analysis of Chlorine-Containing Bleaches E1-1995R(1995)
Standard Test Method for CloudPoint of Nonionic Surfactants R(1997)
Standard Specification forCutback Asphalt (Slow- Curing Type)
Standard Specification forCutback Asphalt (Medium- Curing Type)
Standard Specification forCutback Asphalt (Rapid- Curing Type)
Standard Test Methods forWater Vapor Content of Electrical Insulating Gases by Measurement of DewPoint
Guide for Recommended Uses ofPhotoluminescent Safety Markings FSC 9390; Should Be Used Instead of
MIL-L-3891B, Which Was Cancelled on October 16, 2000
Standard Test Methods forCyanides in Water
Standard Test Method forTheoretical Maximum Specific Gravity and Density of Bituminous PavingMixtures
Standard Test Method forSolubility of Asphalt Materials in Trichloroethylene
Standard Test Methods forMeasuring Zipper Dimensions
Standard Specification forMarine Fuels R(1998)

Standard Specification forPhotoluminescent (Phosphorescent) Safety Markings FSC 9390; Should Be

UsedInstead of MIL-L-3891B, Which Was Cancelled on October 16, 2000
Standard Test Methods forTotal, Primary, Secondary, and Tertiary Amine Values of Fatty Amines,Amidoamines,
and Diamines by Referee Potentiometric Method E1-1998 R(1
Standard Test Method forPhotopic Luminance of Photoluminescent (Phosphorescent) Markings FSC
9390;Should Be Used Instead of MIL-L-3891B, Which Was Cancelled on Octo
Standard Test Method forRubber Property - Vulcanization Using Oscillating Disk Cure Meter
Standard Test Method for PrintResistance of Lacquers
Standard Guide for Preparationof Zinc-Coated (Galvanized) Steel Surfaces for Painting
Standard Test Method for Colorfastnessand Transfer of Color in the Washing of Leather
Standard Test Method forDynamic Water Resistance of Shoe Upper Leather by the Dow Corning LeatherTester
Standard Test Method forDynamic Water Resistance of Shoe Upper Leather by the Maeser WaterPenetration
Tester
Standard Specification forPolyethylene Film and Sheeting
Standard Specification forPolyethylene (PE) Plastic Pipe, Schedule 40 E1-1999
Standard Test Method forLongitudinal Tensile Properties of "Fiberglass"(Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe and Tube
Standard Test Methods forDetermination of Amine Acid Acceptance (Alkalinity) of Halogenated
OrganicSolvents
Standard Test Methods forNonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
Standard Test Methods forSpecific Gravity of Halogenated Organic Solvents and Their Admixtures R(2000)
Standard Test Method forOxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
Standard Practice for RockCore Drilling and Sampling of Rock for Site Investigation
Standard Practice for OvenHeat Stability of Poly(Vinyl Chloride) Compositions R(1997)
Standard Specification forFEP-Fluorocarbon Molding and Extrusion Materials
Standard Test Method forDetermining Dimensions of Thermoplastic Pipe and Fittings
Standard Test Method forResponse of Rigid Cellular Plastics to Thermal and Humid Aging
Standard Test Method forCoated Fabrics - Low- Temperature Bend Test R(1998)
Standard Test Methods forRubber Property - Brittleness Point of Flexible Polymers and Coated FabricsR(2000)
Standard Test Method forAdequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and
MoldedFittings by Acetone Immersion
Standard Test Method for SmokeDensity in Flue Gases from Burning Distillate Fuels R(1999)
Standard Practice forConversion of Kinematic Viscosity to Saybolt Universal Viscosity or toSaybolt Furol
Viscosity E1, E2-2000 R(1999)
Standard Test Method for BasicCalibration of Master Viscometers and Viscosity Oil Standards
Standard Test Method for pH ofAqueous Extracts of Wool and Similar Animal Fibers R(2000)
Standard Test Method forDensity and Unit Weight of Soil in Place by the Rubber Balloon Method
Standard Test Methods forCalibration of Laboratory Mechanical-Rammer Soil Compactors E1-1997 R(1996)
Standard Test Method forKinematic Viscosity of Asphalts (Bitumens) IP Designation: 319/84 (89)
Standard Test Method forViscosity of Asphalts by Vacuum Capillary Viscometer IP Designation: 222/84(89)

Standard Test Methods forQuantitative Extraction of Bitumen from Bituminous Paving Mixtures
Standard Test Method forFolding Endurance of Paper by the M.I.T. Tester
Standard Specification for AsphaltGlass Felt Used in Roofing and Waterproofing
Standard Test Method forConcentration of Formaldehyde Solutions
Standard Test Methods forRheological Properties of Non-Newtonian Materials by Rotational (BrookfieldType)
Viscometer
Standard Test Method forAdhesion of Organic Coatings by Scrape Adhesion
Standard Pictorial SurfacePreparation Standards for Painting Steel Surfaces
Standard Test Method forBursting Strength of Leather by the Ball Method
Standard Test Method forBreaking Strength of Leather by the Grab Method
Standard Test Method forTensile Strength of Leather
Standard Test Method for GrainCrack and Extension of Leather by the Mullen Test
Standard Test Method for SlitTear Resistance of Leather
Standard Test Method forCompressibility of Leather
Standard Test Method forLaboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
Standard Practice for WetPreparation of Soil Samples for Particle-Size Analysis and Determination ofSoil
Constants R(1998)
Standard Test Method for CreepProperties of Package Cushioning Materials
Standard Specification forNatural Rubber (NR) Technical Grades
Standard Test Method forRubber Property - Abrasion Resistance (Pico Abrader) R(2001)
Standard Specification forSolvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe andFittings
Standard Specification forPolyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
Standard Test Method forRubber Property - Durometer Hardness
Standard Specification forPoly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
Standard Test Method forFreeze-Thaw Resistance of Water-Borne Coatings
Standard Test Method forCalculation of Color Differences from Instrumentally Measured ColorCoordinates
R(2000)
Standard Test Method forIdentification of Oils and Oil Acids in Solvent-Reducible Paints R(1999)
Standard Practice for TestingWater Resistance of Coatings in 100% Relative Humidity
Standard Test Method forTensile Properties of Yarns by the Single-Strand Method
Standard Test Method forExtractable Matter in Textiles
Standard Practice for SamplingYarn for Testing
Standard Test Method forDropping Point of Lubricating Grease over Wide Temperature Range
Standard Test Method for WearPreventive Characteristics of Lubricating Grease (Four-Ball Method) R(1996)
Standard Test Method forAnalysis of High-Purity n- Heptane and Isooctane by Capillary GasChromatography
R(1998)
Standard Practice forCalculating Viscosity Index from Kinematic Viscosity at 40 and 100 Degrees CIP
Designation: 226/91 (95); British Standard 4459 R(1998)
Standard Test Method forOxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
Standard Test Method for TraceSediment in Lubricating Oils

Standard Test Method forOxidation Stability of Distillate Fuel Oil (Accelerated Method) IPDesignation:
388/97; E1-1999 R(1999)
Standard Test Method forParticulate Contaminant in Aviation Fuel by Line Sampling IP Designation:216/97
Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Plastic Pipe (SDR-PR)
Standard Specification forNonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion
Compounds
Standard Test Method forApparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by SplitDisk
Method
Standard Practice forFabrication of Ring Test Specimens for Glass-Resin Composites
Standard Test Methods forLiquid-Contaminant, Inclined- Plane Tracking and Erosion of InsulatingMaterials
Standard Classification forMachine-Made "Fiberglass" (Glass-Fiber-ReinforcedThermosetting-Resin) Pipe
Standard Practice forUnderground Installation of Thermoplastic Pipe for Sewers and OtherGravity-Flow
Applications
Standard Test Method forResistance of Shoe Upper Leather to Artificial Perspiration
Standard Test Method forMethylene Blue Active Substances E1-1995 R(1995)
Standard Test Method forTensile Properties of Glass Fiber Strands, Yarns, and Rovings Used inReinforced
Plastics
Standard Test Method forShort-Beam Strength of Polymer Matrix Composite Materials and Their
LaminatesE1-2000
Standard Test Method forApparent Density of Leather
Standard Test Method forAntimony Oxide in White Pigment Separated from Solvent-Reducible PaintsR(1999)
Standard Test Method for TraceImpurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
Standard Test Method forVolatile Content of Coatings
Standard Test Method forTensile Properties of Organic Coatings
Standard Test Method forPigment Content of Solvent- Reducible Paints R(1999)
Standard Practice forSeparation of Vehicle from Solvent-Reducible Paints R(1999)
Standard Test Method for Heatof Combustion of Hydrocarbon Fuels by Bomb Calorimeter (HighPrecisionMethod)
Standard Test Method forFreezing Point of Aviation Fuels
Standard Test Method for Colorof Dyed Aviation Gasolines
Standard Test Methods forSpecific Gravity of Wood and Wood-Based Materials E1-1997; E2-2000 R(1997)
Standard Specification forCationic Emulsified Asphalt
Standard Test Method forDetermination of External Loading Characteristics of Plastic Pipe byParallel- Plate
Loading
Standard Test Method forCarbon Black-Oil Absorption Number
Standard Test Method for SandEquivalent Value of Soils and Fine Aggregate
Standard Test Method forPermeability of Granular Soils (Constant Head) E1-1993 R(2000)
Standard Test Method forOxidation Stability of Mineral Insulating Oil
Standard Test Method forDetermination of the Impact Resistance of Thermoplastic Pipe and Fittings byMeans
of a Tup (Falling Weight)

Standard Specification forPolyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on OutsideDiameter
Standard Test Method forIdentification of Carboxylic Acids in Alkyd Resins E1-1996 R(1996)
Standard Test Method forSpecular Gloss of Plastic Films and Solid Plastics
Standard Specification forThreaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
Standard Specification forPoly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
Standard Specification forPoly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Plastic Pipe Fittings, Schedule 40
Standard Test Method for Gel Timeand Peak Exothermic Temperature of Reacting Thermosetting Resins
Standard Specification forSulfur Hexafluoride
Standard Test Method forAccelerated Evaluation of Wood Preservatives for Marine Services by Means
ofSmall-Size Specimens E1-1995 R(1994)
Standard Test Method for ScrubResistance of Wall Paints
Standard Practice forClassification of Soils for Engineering Purposes (Unified Soil ClassificationSystem)
Standard Practice for Descriptionand Identification of Soils (Visual-Manual Procedure)
Standard Test Method for Formsof Sulfur in Coal R(1998)
Standard Test Method for CloudPoint of Petroleum Products British Standard 4458
Standard Test Method forRelative Molecular Mass (Molecular Weight) of Hydrocarbons by
ThermoelectricMeasurement of Vapor Pressure R(1997)
Standard Test Method forAdhesion of Solid Film Lubricants R(1998)
Standard Test Method forThermal Shock Sensitivity of Solid Film Lubricants E1-1998 R(1998)
Standard Test Method forCompatibility of Materials with Liquid Oxygen (Impact Sensitivity Thresholdand
Pass-Fail Techniques)
Standard Specification forThermoplastic Gas Pressure Pipe, Tubing, and Fittings
Standard Specification forReinforced Epoxy Resin Gas Pressure Pipe and Fittings
Standard Test Method for BondStrength of Electrical Insulating Varnishes by the Helical Coil Test
Standard Test Methods forComplex Permittivity (Dielectric Constant) of Solid Electrical InsulatingMaterials at
Microwave Frequencies and Temperatures to 1650 Degree
Standard Test Method forViscosity and Viscosity Change After Standing at Low Temperature of
AircraftTurbine Lubricants R(1998)
Standard Test Method forVapor-Liquid Ratio of Spark- Ignition Engine Fuels
Standard Test Method forApparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow
PropertiesR(1997)
Standard Specification forAdhesives for Structural Laminated Wood Products for Use under Exterior (WetUse)
Exposure Conditions
Standard Practice forClassifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
Standard Specification forSolvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
Standard Practice forXenon-Arc Exposure of Plastics Intended for Outdoor Applications
Standard Test Method forIsocyanate Groups in Urethane Materials or Prepolymers
Standard Test Method for FieldVane Shear Test in Cohesive Soil
Standard Test Method for TotalOrganic Carbon in Water E1-1994
Standard Test Method forPhenols in Water by Gas- Liquid Chromatography
Standard Test Method forPuncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

Standard Test Method forIndentation Hardness of Rigid Plastics by Means of a Barcol Impressor
Standard Test Method for IgnitionLoss of Cured Reinforced Resins
Standard Test Method forEvaporation Loss of Lubricating Greases over Wide-Temperature Range
Standard Test Method forMeasurement of Extreme- Pressure Properties of Lubricating Grease (FourBallMethod)
Test Method for Sonic ShearStability of Polymer- Containing Oils
Standard Specification forPlastic Insert Fittings for Polyethylene (PE) Plastic Pipe
Standard Test Method for TotalAsh in Leather
Standard Test Method forSulfur in Petroleum Products by Wavelength Dispersive X-Ray
FluorescenceSpectrometry
Standard Test Method forEndurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants(Falex
Pin and Vee Method) R(1998)
Standard Specification forAsphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
Standard Specification forPreformed Polychloroprene Elastomeric Joint Seals for Concrete PavementsR(1998)
Standard Test Method forRubber Property - Resilience by Vertical Rebound
Standard Test Method forCorrosion Characteristics of Solid Film Lubricants E1-2000
Standard Guide for Preparationof Metal Surfaces for Adhesive Bonding R(1995)
Standard Practice for HeatFusion Joining of Polyolefin Pipe and Fittings
Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Schedule 40 Plastic Drain, Waste, andVent
Pipe and Fittings E1-1999
Standard Specification forPolybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
Standard Specification forPoly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Standard Specification forPolybutylene (PB) Plastic Tubing
Standard Test Method forBiodegradability of Alkylbenzene Sulfonates
Standard Test Method forMeasuring Wear Properties of Fluid Lubricants (Falex Pin and Vee BlockMethod)
R(1999)
Standard Test Methods forHeat-Shrinkable Tubing for Electrical Use
Standard Specification forJoints for IPS PVC Pipe Using Solvent Cement
Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) and Poly(Vinyl Chloride) (PVC)Composite
Sewer Piping
Standard Specification forSocket-Type Polyethylene Fittings for Outside Diameter-ControlledPolyethylene Pipe
and Tubing
Standard Specification forPolytetrafluoroethylene- Backed Pressure-Sensitive Electrical Insulating Tape
Standard Test Method forVolume Nonvolatile Matter in Clear or Pigmented Coatings R(1998)
Standard Test Method forDetermination of the Pigment Content of Solvent-Reducible Paints byHigh-Speed
Centrifuging R(1999)
Standard Test Method forResearch Octane Number of Spark-Ignition Engine Fuel IP Designation: 237
Standard Test Method for MotorOctane Number of Spark- Ignition Engine Fuel IP Designation: 236/87
Standard Practice for RubberChemicals - Determination of Infrared Absorption Characteristics R(1998)

Standard Test Method for Waterand Sediment in Middle Distillate Fuels by Centrifuge E1-1998; E2-1999
Standard Test Method forCalibration and Operation of the Falex Block-On-Ring Friction and WearTesting
Machine R(1998)
Standard Test Methods forBonded, Fused, and Laminated Apparel Fabrics R(1995)
Standard Test Method for BulkSpecific Gravity and Density of Non-Absorptive Compacted Bituminous
Mixtures
Standard Specification forPoly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Standard Test Method forUnrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
Standard Test Methods for VoidContent of Reinforced Plastics
Standard Specification forPolyethylene (PE) Plastic Tubing
Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Sewer Pipe and Fittings Errata
Standard Test Method forSpecific Heat of Liquids and Solids R(2000)
Standard Practice forUnderground Installation of Thermoplastic Pressure Piping
Standard Test Method forResistance of Organic Coatings to the Effects of Rapid Deformation (Impact)E1-1999
R(1999)
Standard Test Method forPreparation of Methyl Esters from Oils for Determination of Fatty AcidComposition
by Gas-Liquid Chromatography R(1998)
Standard Specification forOzone-Resistant Ethylene- Alkene Polymer Insulation for Wire and Cable
Standard Guide for TestingFiliform Corrosion Resistance of Organic Coatings on Metal
Standard Test Method forPurity of Methyl Ethyl Ketone by Gas Chromatography
Standard Test Method forHiding Power of Paints by Reflectometry
Standard Test Method forChromic Oxide in Leather (Perchloric Acid Oxidation) R(1998)
Standard Test Method forMeasuring the Relative Stiffness of Leather by Means of a Torsional WireApparatus
Standard Specification forAsphalt Roof Cement E1-1997 R(1997)
Standard Specification forAsphalt Roof Coatings E1- 1997 R(1997)
Standard Specification forAluminum-Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered,
andFibered Without Asbestos
Standard Specification forLubricant for Installation of Preformed Compression Seals in ConcretePavements
R(1998)
Standard Test Method forObtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
Standard Test Method for WaterAbsorption of Rigid Cellular Plastics
Standard Test Method forDensity of Smoke from the Burning or Decomposition of Plastics
Standard Specification forChlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-WaterDistribution
Systems
Standard Specification forStyrene-Rubber (SR) Plastic Drain Pipe and Fittings
Standard Test Method forApparent Density of Activated Carbon R(2000)
Standard Practice for MakingSolvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
Standard Test Method forOpen-Cell Content of Rigid Cellular Plastics by the Air Pycnometer R(1998)

Standard Test Method forIgnition Characteristics of Finished Textile Floor Covering Materials
Standard Test Method forAdhesion of Pressure- Sensitive Tape to Fiberboard at 90 Degree Angle andConstant
Stress R(1999)
Standard Test Method forParticle Size Distribution of Granular Activated Carbon
Standard Test Method forMeasuring the Minimum Oxygen Concentration to Support Candle-like
Combustionof Plastics (Oxygen Index)
Standard Test Methods forMoisture in Activated Carbon
Standard Test Method forNitrogen Content (Kjeldahl) and Hide Substance Content of Leather
Standard Specification for GasTurbine Fuel Oils
Standard Test Method forResearch and Motor Method Octane Ratings Using On-Line Analyzers
IPDesignation: 360/96 R(1999)
Standard Test Method forBoiling Range Distribution of Petroleum Fractions by Gas Chromatography
Standard Test Method for BaseNumber of Petroleum Products by Potentiometric Perchloric Acid Titration
IPDesignation: 276/95
Standard Practice forStatements on Number of Specimens for Textiles
Standard Test Methods forDensity of Soil and Soil- Aggregate in Place by Nuclear Methods (ShallowDepth)
E1-1997
Standard Test Method forApparent Density of Industrial Aromatic Hydrocarbons R(2000)
Standard Test Method forDensity of Soil in Place by the Drive-Cylinder Method
Standard Test Methods forEmulsified Bitumens Used as Protective Coatings
Standard Specification forGraded Aggregate Material for Bases or Subbases for Highways or Airports
Standard Test Method forMeasuring Break Pattern of Leather (Break Scale)
Standard Test Method for TotalAcid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
Standard Specification for3.25-in. Outside Diameter Poly(Vinyl Chloride)(PVC) Plastic Drain, Waste, andVent
Pipe and Fittings
Standard Test Method forDensity of Bituminous Concrete in Place by Nuclear Methods R(1997)
Standard Test Method forLow-Temperature Viscosity of Automotive Fluid Lubricants Measured byBrookfield
Viscometer R(1993)
Standard Test Method forAcidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
Standard Test Methods forTensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
Standard Practice for ObtainingHydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe and Fittings E1- 1999
Standard Practice forDetermining Application Rate of Bituminous Distributors
Standard Specification forFilament-Wound "Fiberglass" (Glass-Fiber-ReinforcedThermosetting-Resin) Pipe
Standard Specification forCentrifugally Cast "Fiberglass" (Glass-Fiber-ReinforcedThermosetting- Resin) Pipe
Standard Specification forPolybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter E1-1999
Standard Specification forEpoxy Molding Compounds
Standard Test Method for FlameHeight, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular
Plasticsin a Vertical Position
Standard Test Method for WaterContent of Soil and Rock in Place by Nuclear Methods (Shallow Depth) E11997

Standard Specification forClass A Asphalt Shingles Surfaced with Mineral Granules

Standard Test Methods forHookup Wire Insulation
Standard Specification forType PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Standard Specification forPolyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
Standard Test Method forTensile Properties of Polymer Matrix Composite Materials

Standard Practice for HeatAging of Plastics without Load R(1997)

Standard Test Method for GelTime of Solventless Varnishes
Standard Guide for Three-PieceSteel and Tinplate Straight-Wall and Necked-In Aerosol Cans E1-2000
Standard Terminology Relatingto Aerosol Products
Standard Test Methods forFlammability of Aerosol Products
Standard Test Method forDelivery Rate of Aerosol Products E1-1999 R(1999)
Standard Test Method of RapidPressure Determination of Pressurized Products
Standard Test Method forDetermination of Leaks in Flexible Packaging by Bubble Emission
Standard Practice for StorageTesting of Aerosol Products E1-1997 R(1997)
Standard Practice for SafeFilling of Low-Pressure Pressurized Products E1-1997 R(1997)
Standard Test Method for Particle-SizeDistribution of Space-Insecticide Aerosol R(1993)
Standard Test Method forAerosol Products for Delivered Mass
Standard Test Method for TraceQuantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative
Microcoulometry
Standard Specification forSolvent Cements for Styrene- Rubber (SR) Plastic Pipe and Fittings
Standard Test Method forRubber Property - Hydrolytic Stability R(1994)
Standard Specification forSolvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene
(ABS) and Poly(Vinyl Chloride) (PVC) Non- Pressure Piping Co
Standard Specification forJoints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
Standard Test Method forThermal Endurance of Electrical Insulating Varnishes by the Helical CoilMethod
Standard Test Method forTesting Stop-Leak Additives for Engine Coolants R(1999)
Standard Specification forModified ETFE-Fluoropolymer Molding and Extrusion Materials
Standard Test Method forWind-Resistance of Asphalt Shingles (Fan-Induced Method)
Standard Test Method forCarbon Monoxide in the Atmosphere (Continuous Measurement by
NondispersiveInfrared Spectrometry) E1-2000 R(2000)
Standard Test Method forFatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
Standard Practice forQualitative Identification of Polymers in Emulsion Paints R(1999)
Standard Test Method forChipping Resistance of Coatings E1-1996 R(1996)
Standard Test Method forConstituent Content Composite Materials
Standard Test Method for Ashin the Analysis Sample of Coal and Coke from Coal
Standard Test Method forVolatile Matter in the Analysis Sample of Coal and Coke R(1997)
Standard Test Methods forTotal Sulfur in the Analysis Sample of Coal and Coke R(1997)
Standard Practice for Rubber -Materials, Equipment, and Procedures for Mixing Standard Compounds
andPreparing Standard Vulcanized Sheets (PNS 876:1992) R(1994)
Standard Practice for Rubber -Preparation of Pieces for Test Purposes from Products R(1998)

Standard Test Methods forRubber - Evaluation of SBR (Styrene-Butadiene Rubber) Mixed with Carbon
Blackor Carbon Black and Oil
Standard Specification forJoints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
Standard Specification forUnmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and
CoatingMaterials
Standard Test Method for TotalMercury in Water
Standard Test Method for Thiol(Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and DistillateFuels
(Potentiometric Method)
Standard Test Method for TotalNitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
Standard Test Method for Saltsin Crude Oil (Electrometric Method)
Standard Test Method forPhosphorus in Gasoline
Standard Test Method forUndissolved Water in Aviation Turbine Fuels R(1996)
Standard Test Method forThermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
IPDesignation: 323/89
Standard Test Method forAcidity in Aviation Turbine Fuel IP Designation: 354/81(87)
Standard Practice for GeneralAmbient Air Analyzer Procedures R(2000)
Standard Test Methods forAromatics in Mineral Spirits by Gas Chromatography
Standard Specification forButt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE)Plastic Pipe
and Tubing
Standard Test Method forAutomated Separation and Collection of Particulate and Acidic GaseousFluoride in
the Atmosphere (Double Paper Tape Sampler Method) E1-2000 R
Standard Test Method forSeparation and Collection of Particulate and Gaseous Fluorides in theAtmosphere
(Sodium Bicarbonate-Coated Glass Tube and Particulate Filter
Standard Test Methods forAnalysis for Fluoride Content of the Atmosphere and Plant Tissues
(ManualProcedures) E1-2001 R(2001)
Standard Practice for DirectInjection of Solvent- Reducible Paints into a Gas Chromatograph for
SolventAnalysis R(2001)
Standard Practice for VacuumDistillation of Solvents from Solvent-Reducible Paints for Analysis R(1998)
Standard Test Method forResistance to Growth of Mold on the Surface of Interior Coatings in anEnvironmental
Chamber
Standard Test Method forEvaluating Degree of Surface Disfigurement of Paint Films by Microbial(Fungal or
Algal) Growth or Soil and Dirt Accumulation
Standard Specification forE-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
Standard Test Methods forFlash Point of Liquids by Small Scale Closed-Cup Apparatus E1-1997
Standard Test Methods forAnalysis of White Zinc Pigments R(1999)
Standard Practice forClassification of Soils and Soil- Aggregate Mixtures for Highway ConstructionPurposes
E1-1999 R(1997)
Standard Specification forPTFE Tubing
Standard Specification forFilament-Wound Glass-Fiber- Reinforced Thermoset Resin CorrosionResistantTanks
Standard Specification forPerfluoroalkoxy (PFA)- Fluorocarbon Resin Molding and Extrusion Materials
Standard Specification forPTFE Resin Skived Tape

Standard Specification forPolybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
Standard Specification forEmulsified Coal-Tar Pitch (Mineral Colloid Type)
Standard Test Method forPurity of Methyl Isobutyl Ketone by Gas Chromatography
Standard Test Method for PeelAdhesion of Pressure- Sensitive Tape

Standard Test Method for LowConcentrations of Lead, Cadmium, and Cobalt in Paint by Atomic
AbsorptionSpectroscopy R(1999)
Standard Test Method for Lifeof Lubricating Greases in Ball Bearings at Elevated Temperatures
Standard Test Method forDetermining Life and Torque of Lubricating Greases in Small Ball BearingsR(1996)
Standard Test Method forEstimation of Net Heat of Combustion of Aviation Fuels
Standard Test Method forEstimation of Hydrogen Content of Aviation Fuels R(2000)
Standard Test Method for FilmHardness by Pencil Test
Standard Specification forFEP-Fluorocarbon Sheet and Film
Standard Specification forPolytetrafluoroethylene (PTFE) Resin Cast Film
Standard Practices forSampling Water from Closed Conduits E1-1999 R(1999)
Standard Test Method forMolybdenum in Water R(1996)
Standard Test Method for Vanadiumin Water R(1998)
Standard Specification forVinyl-Coated Glass Yarns
Standard Test Method forTensile Strength and Young's Modulus for High-Modulus Single-FilamentMaterials
E1- 1989 R(1989)
Standard Specification forViscosity-Graded Asphalt Cement for Use in Pavement Construction R(1999)
Standard Test Method forInfiltration Rate of Soils in Field Using Double-Ring Infiltrometer
Standard Test Method forCoefficient of Linear Thermal Expansion of Electrical Insulating Materials
Standard Test Method forCoated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader)R(1999)
Standard Specification forLiquid Sodium Silicates R(1997)
Standard Test Methods forWater in Halogenated Organic Solvents and Their Admixtures
Standard Test Method forCompressive Properties of Polymer Matrix Composite Materials with
UnsupportedGage Section by Shear Loading
Standard Test Method forEnthalpies of Fusion and Crystallization of Polymers by Differential
ScanningCalorimetry (DSC)
Standard Test Method forTransition Temperatures of Polymers by Differential Scanning Calorimetry
Standard Test Method forUnreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutionsby
Gas Chromatography E1-1996 R(1996)
Standard Test Method forMechanical Cone Penetration Tests of Soil
Standard Test Method forChloride in Trichlorotrifluoroethane
Standard Test Method forPurity of Halogenated Organic Solvents
Standard Test Method forWashability Properties of Interior Architectural Coatings

Standard Practice for Rubber -Identification by Pyrolysis-Gas Chromatography R(1998)

Standard Specification forFlexible Cellular Materials - Urethane for Furniture and AutomotiveCushioning,
Bedding, and Similar Applications
Standard Specification forAsphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
Standard Test Method forAverage Velocity in a Duct Using a Thermal Anemometer R(2001)
Standard Test Method forTension-Tension Fatigue of Polymer Matrix Composite Materials

Standard Test Method forDetermining Electrolytic Corrosion of Copper by Adhesives R(2000)

Standard Specification forMineral Insulating Oil Used in Electrical Apparatus
Standard Specification forRubber Contraceptives (Male Condoms)
Standard Test Method forHexane Extraction of Leather
Standard Test Methods forStructural Panels in Tension E1-1995 R(1995)
Standard Test Method forDensity or Relative Density of Pure Liquid Chemicals R(2000)
Standard Test Method forPilling Resistance and Other Related Surface Changes of Textile Fabrics:Brush Pilling
Tester
Standard Specification for"Fiberglass" (Glass-Fiber- Reinforced Thermosetting-Resin) PressurePipe
Standard Test Method forIn-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Testof a
+/-45 Degree Laminate E1-1995
Standard Test Method forMatrix Solids Content of Composite Pregreg

Standard Test Method forVolatiles Content of Composite Material Prepreg

Standard Test Method for ResinFlow of Carbon Fiber- Epoxy Prepreg

Standard Test Method for GelTime of Carbon Fiber- Epoxy Prepreg
Standard Test Methods for EvaporationRates of Volatile Liquids by Shell Thin-Film Evaporometer R(1996)
Standard Guide for ReportingTest Methods and Results on High Modulus Fibers R(1996)
Standard Test Method forAlcohol Content and Purity of Acetate Esters by Gas Chromatography
Standard Practice forLaboratory Preparation of Soil- Lime Mixtures Using a Mechanical MixerE1-1997
R(1996)
Test Method for TensileProperties of Fiber-Reinforced Metal Matrix Composites E1-2000
Standard Test Method for FiberContent by Digestion of Reinforced Metal Matrix Composites R(1996)
Standard Test Methods for Leadin Water
Standard Practice forDetermining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin)
Pipe and Fittings
Standard Test Methods forFlexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams
Standard Test Methods forFlexible Cellular Materials Made from Olefin Polymers
Standard Specification forRubber Surgical Gloves
Standard Specification forRubber Examination Gloves
Standard Specification forRubber Surgical Drainage Tubes, Penrose-Type E1-1999 R(1999)

Standard Specification forPolychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

Standard Practice forAccelerated Aging of Pressure- Sensitive Tapes R(1998)
Standard Practice for Samplingand Analysis of New Built-Up Roof Membranes E1-1994 R(1994)
Standard Test Method forTesting Antifouling Panels in Shallow Submergence R(1998)
Standard Test Method for LowConcentrations of Mercury in Paint by Atomic Absorption Spectroscopy R(1999)
Standard Test Method for TraceChloride Ion in Engine Coolants
Standard Test Method forThickness of Pressure- Sensitive and Gummed Tapes R(1999)

Standard Test Methods forShear Adhesion of Pressure- Sensitive Tapes E1: 2000

Standard Specification forInsect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns
Standard Specification forMinimum Requirements for Agencies Testing and Inspecting Road and
PavingMaterials
Standard Specification forRubber Seals Used in Flat- Plate Solar Collectors R(2000)
Standard Test Method forBearing Ratio of Laboratory Compacted Soil-Lime Mixtures R(1985)
Standard Test Methods forRubber-Identification by Infrared Spectrophotometry
Standard PerformanceSpecification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics
Standard Specification forKerosine
Standard Test Method forHydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear
MagneticResonance Spectrometry IP Designation: 338/98
Standard Test Method forPeroxide Number of Aviation Turbine Fuels
Standard Practice for QualityAssurance of Pressure- Sensitive Tapes

Standard Test Method for LowConcentrations of Chromium in Paint by Atomic Absorption Spectroscopy
R(1999)
Standard Test Method forSemiquantitative Determination of Fish Oil in Drying Oils and Drying OilFatty Acids
by Gas-Liquid Chromatography R(1998)
Standard Practice forReporting Cure Times of Ultraviolet-Cured Coatings E1-1996 R(1996)
Standard Specification forHigh-Flash Aromatic Naphthas
Standard Specification forRubber-Coated Cloth Hospital Sheeting R(2000)
Standard Practice for MinimumRequirements for Agencies Engaged in the Testing and/or Inspection of Soiland
Rock as Used in Engineering Design and Construction
Standard Test Method for TensileStrength and Elongation of Pressure-Sensitive Tapes E1-1997

Standard Test Method for TotalFluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode
Method
Standard Practice for Rubber -Measurement of Dimensions

Standard Specification forRubber Finger Cots

Standard Test Methods forLength of Woven Fabric E1- 1996 R(1996)
Standard Test Methods forWidth of Textile Fabric
Standard Test Method forFabric Count of Woven Fabric
Standard Test Method for MassPer Unit Area (Weight) of Fabric
Standard Test Method forVolatile Matter (Moisture) of Leather by Oven Drying R(1996)
Standard Test Method for WaterContent of Coatings by Direct Injection into a Gas Chromatograph
Standard Test Method forDensity of High-Modulus Fibers
Standard Test Method forUnwind Force of Pressure- Sensitive Tapes E1-1997

Standard Test Method for Curling,Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes

Standard Practice forAccelerated Weathering of Pressure-Sensitive Tapes by Carbon-Arc ExposureApparatus

Standard Test Methods forFlash Point by Small Scale Closed Tester IP Designation: 303/83 (88)
Standard Specification forRubber Seals Contacting Liquids in Solar Energy Systems E1-1998 R(1997)
Standard Test Method for WaterVapor Transmission of Pressure-Sensitive Tapes E1-1997

Standard Practice forUnderground Installation of "Fiberglass" (Glass-Fiber-ReinforcedThermosetting- Resin)

Pipe
Standard Specification forGlass-Fiber-Reinforced Polyester Plastic Panels
Standard Test Method forin-Plane Shear Strength of Reinforced Plastics
Standard Test Method for RapidThermal Degradation of Solid Electrical Insulating Materials
byThermogravimetric Method (TGA) R(2000)
Standard Terminology forComposite Materials
Standard Specification forTolerances for Knitted Fabrics
Standard Practice forPackaging/Packing of Plastics R(1998)
Standard Specification forAsphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
Standard Practices for Design,Testing, and Construction of Slurry Seal
Standard Test Method forTensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
Standard Test Method for Oiland Grease and Petroleum Hydrocarbons in Water
Standard Specification forStandard Environment for Conditioning and Testing Paint, Varnish, Lacquer,and
Related Materials R(1996)
Standard Practice for SamplingLiquid Paints and Related Pigmented Coatings R(1996)
Standard Specification forPolycarbonate (PC) Unfilled and Reinforced Material
Standard Test Method for FlashPoint by the Equilibrium Method with a Closed-Cup Apparatus E1-1996
R(1996)
Standard Test Method forDetermining Water Separation Characteristics of Aviation Turbine Fuels byPortable
Separometer

Standard Specification forStrapping, Nonmetallic (and Joining Methods)

Standard Practice forCommercial Packaging
Standard Specification for Strapping,Flat Steel and Seals
Standard Practice forDetermining Volatile Organic Compound (VOC) Content of Paints and RelatedCoatings
Standard Terminology Relatingto Fabric Defects
Standard Classification Systemfor Specifying Plastic Materials
Standard Test Methods forRubber - Determination of Metal Content by Flame Atomic Absorption
(AAS)Analysis R(1998)
Standard Test Method for Waterin Crude Oil by Distillation API Designation: Chapter 10.2 (MPMS);
IPDesignation: 358/97; E1-2000 R(2000)
Standard Test Method for Waterin Paints and Paint Materials by Karl Fischer Method
Standard Test Methods forProperties of Continuous Filament Carbon and Graphite Fiber Tows
Standard Test Method forMoisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide
Standard Specification forUltra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
Standard Specification forCoal Tar Roof Cement, Asbestos Containing E1 R(2000)
Standard Test Method forPhosphorus in Lubricating Oils and Additives by Quinoline
PhosphomolybdateMethod
Standard Test Method forDetection of Copper Corrosion from Lubricating Grease
Standard Test Method forDensity and Relative Density of Liquids by Digital Density Meter IPDesignation:
365/84(86)
Standard Practice for ManualSampling of Petroleum and Petroleum Products IP Designation: IMPMS
(Chapter8.1) R(2000)
Standard Test Method forAbrasion Resistance of Organic Coatings by the Taber Abraser
Standard Practice forDetermining and Reporting Dynamic Mechanical Properties of Plastics
Standard Classification Systemfor Nylon Injection and Extrusion Materials (PA)
Standard Specification forReinforced and Filled Polyphenylene Sulfide (PPS) Injection Molding andExtrusion
Materials
Standard Test Methods forCompounding Materials - Flame Atomic Absorption Technique - Determination
ofMetals R(1997)
Standard Specification forTrichloroethylene, Technical and Vapor-Degreasing Grade
Standard Practice forDescription of Frozen Soils (Visual-Manual Procedure) E2-1999 R(1994)
Standard Terminology Relatingto Dynamic Mechanical Measurements on Plastics
Standard Specification forContact-Molded Glass-Fiber- Reinforced Thermoset Resin Corrosion-Resistant
TanksE1-1996; E2, E3-1999
Standard Specification forPolypropylene Injection and Extrusion Materials
Standard Test Method forThermal Oxidative Resistance of Carbon Fibers R(1999)
Standard Specification forVapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
(Withdrawn) Standard TestMethod for Abrasion Resistance of Textile Fabrics (Oscillatory CylinderMethod)

Standard Practice forPerformance Testing of Shipping Containers and Systems E1-2000

Standard Test Method for WearPreventive Characteristics of Lubricating Fluid (Four-Ball Method) R(1999)
Standard Terminology Relatingto Petroleum, Petroleum Products, and Lubricants E1: 2000
Standard Test Method for FreeWater and Particulate Contamination in Distillate Fuels (Visual
InspectionProcedures) R(1997)
Standard Practice forAutomatic Sampling of Petroleum and Petroleum Products IP Designation: MPMSChapter
8.2 R(2000)
Standard Classification forAcetal (POM) Molding and Extrusion Materials
Standard Specification forStyrene-Acrylonitrile (SAN) Injection and Extrusion Materials
Standard Test Methods forEvaluating the Degree of Chalking of Exterior Paint Films
Standard Specification forRigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated
Poly(VinylChloride) (CPVC) Building Products Compounds
Standard Practices forPreserving and Transporting Soil Samples R(2000)
Standard Specification forStyrene-Butadiene Sheeting
Standard Test Methods forSulfur in the Analysis Sample of Coal and Coke Using High-Temperature
TubeFurnace Combustion Methods
Standard Test Methods forMaximum Index Density and Unit Weight of Soils Using a Vibratory Table
Standard Test Methods forMinimum Index Density and Unit Weight of Soils and Calculation of
RelativeDensity
Standard Guide for TestingInplane Shear Properties of Composite Laminates E1-1994 R(1994)

Standard Test Method forIndicating Moisture in Concrete by the Plastic Sheet Method R(1999)
Standard Test Methods forTesting Fiber Ropes
Standard Test Method forHigh-Shear Viscosity Using a Cone/Plate Viscometer
Standard Test Method forElastomer Compatibility of Lubricating Greases and Fluids
Standard Test Method forSulfur in Petroleum Products by Energy-Dispersive X-Ray FluorescenceSpectrometry
Standard Test Methods forAbility of Adhesive Films to Support or Resist the Growth of Fungi
Standard Practice for AviationFuel Sample Containers for Tests Affected by Trace Contamination
Standard Specification forPolyvinyl Acetate-Based Emulsion Adhesives
Standard Test Methods forLiquid Limit, Plastic Limit, and Plasticity Index of Soils
Standard Test Methods forNonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
Standard Test Method forFlexibility Determination of Supported Adhesive Films by Mandrel Bend
Standard Test Method forCorrosivity Index of Plastics and Fillers
Standard Test Method forDeterioration of Geotextiles from Exposure to Ultraviolet Light and Water(XenonArc Type Apparatus)
Standard Test Method for Waterin Crude Oils by Potentiometric Karl Fischer Titration API Designation:
MPMSChapter 10.7; IP Designation: 356/93
Standard Specification forNonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
Standard Specification forPolyethylene Sheeting for Construction, Industrial, and AgriculturalApplications
Standard Test Method for ViscosityDeterminations of Unfilled Asphalts Using the Brookfield Thermosel
ApparatusE1-2000 R(2000)

Standard Test Methods forField Measurement of Surface Profile of Blast Cleaned Steel R(1999)
Standard Classification ofPeat Samples by Laboratory Testing R(1997)
Standard Test Method for CBR(California Bearing Ratio) of Soils in Place
Standard Specification forPoly(Vinyl Chloride) Sheet Roofing
Standard Test Methods forDirect Moisture Content Measurement of Wood and Wood-Base
MaterialsSupersedes D2016 Along with D4444; E1-1997 R(1997)
Standard Test Methods for Useand Calibration of Hand- Held Moisture Meters E1-1998 R(1998)
Standard Practice forMeasuring the Cure Behavior of Thermosetting Resins Using Dynamic
MechanicalProcedures
Standard Specification forAsphalt Roof Coatings - Asbestos-Free
Standard Test Methods forWater Permeability of Geotextiles by Permittivity
Standard Test Method forDetermining Grit, Lumps, or Undissolved Matter in Water-Borne Adhesives
Standard Specification forThermoplastic Polyester (TPES) Materials
Standard Test Method forDetermination of Carbon Residue (Micro Method)
Standard Test Method forTrapezoid Tearing Strength of Geotextiles R(1996)
Standard Specification forPolystyrene and Rubber- Modified Polystyrene Molding and Extrusion Materials
Standard Specification forAsphalt Roof Cement, Asbestos-Free
Standard Specification forAsphalt-Coated Glass Fiber Base Sheet Used in Roofing
Standard Specification forn-Butyl Acetate (All Grades)
Standard Specification forPhenolic Compounds (PF)
Standard Test Method forMeasuring Apparent Viscosity by Capillary Viscometer at High-Temperature
andHigh- Shear Rates R(1998)
Standard Test Method forDistillate Fuel Storage Stability at 43 Degrees C (110 Degrees F) IPDesignation:
378/87 R(1998)
Standard Test Method forAnalysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oilsby
Atomic Absorption Spectrometry
Standard Test Method for TraceNitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet
OxidativeCombustion and Chemiluminescence Detection IP Designation: 379/88
Standard Specification forStyrene-Maleic Anhydride Materials (S/MA)
Standard Test Method forCorrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft TurbineEngine
Lubricants, and Other Highly Refined Oils
Standard Specification forEPDM Sheet Used in Single- Ply Roof Membrane
Standard Test Method forDetermination of Water (Moisture) Content of Soil by the Microwave OvenMethod
Standard Test Method for TotalChlorides in Leather R(1998)
Standard Test Methods forSulfates in Leather (Total, Neutral, and Combined Acid)
Standard Classification Systemfor Acrylonitrile- Butadiene-Styrene (ABS) Plastics and Alloys Molding
andExtrusion Materials
Standard Guide for Selectionand Use of Flat Strapping Materials
Standard Test Method forMeasuring Viscosity at High Shear Rate and High Temperature by TaperedBearing
Simulator

Standard Test Method forDetermination of Yield Stress and Apparent Viscosity of Engine Oils at
LowTemperature E1-2000
Standard Specification forAdhesive, Casein-Type
Standard Specification forUrea-Formaldehyde Resin Adhesives
Standard Specification forTechnical Grade Methylene Chloride
Standard Test Method forTearing Strength, Tongue Tear of Leather
Standard Test Method forStitch Tear Strength of Leather, Double Hole
Standard Specification forCorrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes

Standard Test Method forCalculated Cetane Index by Four Variable Equation IP Designation: 380/94
Standard Test Method forMeasuring Viscosity at High Temperature and High Shear Rate by TaperedPlugViscometer
Standard Specification forFilled Compounds of Polytetrafluoroethylene (PTFE) Molding and
ExtrusionMaterials
Standard Test Method forPerforming the Sieve Analysis of Coal and Designating Coal Size Replaces
ASTMD310- 88, D311-84, D410-84, D431-84; E1-1994 R(1994)
Standard Test Method forDetermining Apparent Opening Size of a Geotextile
Standard Practice forDetermining the Specification Conformance of Geosynthetics R(1996)
Standard Test Methods forResistance of Adhesive Preparations in Container to Attack by Bacteria,Yeast, and
Fungi
Standard Test Method forStitch Tear Strength, Single Hole
Standard Test Method for FlatParticles, Elongated Particles, or Flat and Elongated Particles in CoarseAggregate
Standard Specification forPolyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
Standard Specification forPoly(Methyl Methacrylate) Acrylic Plastic Sheet
Standard Test Method forSediment in Crude Oil by Membrane Filtration API Designation: MPMS
(Chapter10.8) R(1999)
Standard Test Methods forHydrogen Content of Light Distillates, Middle Distillates, Gas Oils, andResidua by
Low-Resolution Nuclear Magnetic Resonance Spectroscopy
Standard Test Method for Heatof Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
(PrecisionMethod)
Standard Specification forAutomotive Spark-Ignition Engine Fuel
Standard Test Method forDetermination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to
C4Alcohols in Gasoline by Gas Chromatography
Standard Test Method forBuckle Tear Strength of Leather
Standard Test Method for IndexPuncture Resistance of Geotextiles, Geomembranes, and Related Products
Standard Test Method forDetermination of the Ability of Lubricants to Minimize Ring Sticking andPiston
Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outb
Standard Test Method forDetermination of the Tendency of Lubricants to Promote Preignition inTwo-StrokeCycle Gasoline Engines

Standard Specification forLubricants for Two-Stroke- Cycle Spark-Ignition Gasoline Engines-TC

Standard Test Method forDetermination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
Standard Test Method forDensity of Solid Pitch (Helium Pycnometer Method) E1-1999 R(1999)
Standard Specification forAsphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
Standard Test Method forInsoluble Contamination of Hydraulic Fluids by Gravimetric Analysis E12000R(2000)
Standard Specification forTesting of Hazardous Materials Packagings R(1997)
Standard Test Methods forElemental Analysis of Lubricant and Additive Components - Barium,
Calcium,Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluor
Standard Test Methods forWater in Crude Oils by Coulometric Karl Fischer Titration API Designation:MPMS
Chapter 10.9; IP Designation: 386/99
Standard Test Method forDetermination of Additive Elements in Lubricating Oils by Inductively
CoupledPlasma Atomic Emission Spectrometry
Standard Test Method forQualitative Analysis for Active Sulfur Species in Fuels and Solvents (DoctorTest)
Standard Specification forRetroreflective Sheeting for Traffic Control
Standard Specification forPolyethylene Plastics Molding and Extrusion Materials
Standard Specification for LowSilicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines
Requiringa Pre-Charge of Supplemental Coolant Additive (SCA)
Standard Test Method forMeasurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
Standard Test Method forBreaking Strength and Elongation of Textile Fabrics (Grab Test)
Standard Test Method forBreaking Force and Elongation of Textile Fabrics (Strip Method)
Standard Test Methods for AshContent of Adhesives E1- 1997 R(1997)
Standard Test Method forPermeability of Leather to Water Vapor

Standard Test Method forColorfastness of Crocking of Leather

Standard Test Methods for Leadin Gasoline by X-Ray Spectroscopy IP Designation: 228/79; FSC 9130; Should
BeUsed Instead of ASTM-D3229, Which Was Cancelled on August
Standard Test Method forShrinkage of Textile Fibers (Single-Fiber Test)
Standard Practice forPerforming Accelerated Outdoor Weathering of Pressure-Sensitive Tapes
UsingConcentrated Natural Sunlight R(1999)
Standard Practice forFabrication of Fiberboard Shipping Boxes

Standard Test Method forEvaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine
Standard Test Method forDetection of Holes in Medical Gloves
Standard Practice forFabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
Standard Test Method forDetermination of Additive Elements, Wear Metals, and Contaminants in
UsedLubricating Oils and Determination of Selected Elements in Base Oil
Standard Test Method for VaporPressure of Petroleum Products (Mini Method)
Standard Classification Systemfor Polyamide-Imide (PAI) Molding and Extrusion Materials FSC 9330; Should
BeUsed Instead of MIL-P-46179A, Which Was Cancelled on 27 J
Standard Classification Systemfor Polyetherimide (PEI) Materials

Standard Specification forPolymeric Resin Film for Electrical Insulation and Dielectric Applications
Standard Test Method forMoisture Absorption Properties and Equilibrium Conditioning of Polymer
MatrixComposite Materials E1 R(1998)
Standard Test Method forMeasurement of Resin Content and Other Related Properties of Polymer
MatrixThermoset Prepreg by Combined Mechanical and Ultrasonic Methods
Standard Test Method forAssessing Distillate Fuel Storage Stability by Oxygen Overpressure
Standard Specification forPressure-Sensitive Tape for Packaging, Filament-Reinforced

Standard Specification forCast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
Standard Practice forPictorial Markings for Handling of Goods
Standard Test Method for InplaneShear Properties of Hoop Wound Polymer Matrix Composite Cylinders
R(2000)
Standard Test Method forTransverse Tensile Properties of Hoop Wound Polymer Matrix CompositeCylinders
R(2000)
Standard Test Method for ParticulateContamination in Aviation Fuels by Laboratory Filtration IP
Designation:423/97
Standard Test Methods forThermal Transmission Properties of Thin Thermally Conductive Solid
ElectricalInsulation Materials
Standard Specification forPressure-Sensitive Tape for Packaging, Box Closure, and Sealing E1-2000

Standard Specification forHalon 1301, Bromotrifluoromethane (CF3Br) Replaces ES24-93

Standard Specification forEmulsified Refined Coal Tar (Mineral Colloid Type)
Standard Guide for SourceReduction Reuse, Recycling, and Disposal of Solid and Corrugated
Fiberboard(Cardboard)
Standard Specification forMolding Compounds, Thermosetting E1-1996
Standard Specification forTechnical Grade Ethylene Dichloride
Standard Test Method forDetermination of Resistance of Leather to Bleeding
Standard Test Method forDetermination of Magnesium Sulfate (Epsom Salt) in Leather
Standard Test Method forDetermining the Presence of Lead Salts in Leather
Standard Practice forCalculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
Standard Specification forCrates, Wood, Open and Covered

Standard Test Method forCracking Resistance of Leather

Standard Test Method forShrinkage Temperature of Leather
Standard Specification forStop-Leak Additive for Engine Coolants Used in Light Duty Service Should BeUsed
Instead of MIL-C-51047B, which Was Cancelled on 11 Septemb
Standard Test Method forBlocking

Standard Test Method forTackiness of Finish on Leather

Standard Practice for Stitchesand Seams
Standard Practice for Qualityof Wood Members of Containers and Pallets E1-1999
Standard Specification forFlexible Cellular Rubber Chemically Blown
Specification for WeldingProcedure and Performance Qualification
Recommended Practices forResistance Welding
Recommended Practices forResistance Welding Coated Low Carbon Steels R(1987)
Structural Welding Code -Steel
Structural Welding CodeAluminum
Structural Welding Code - SheetSteel
Structural Welding Code -Reinforcing Steel
Specification for BareElectrodes and Rods for Surfacing R(1989)
Standard Symbols for Welding,Brazing, and Nondestructive Examination
Standard for Brazing Procedureand Performance Qualification
Guide for Thermal-SprayOperator Qualification
Standard Welding Terms andDefinitions Including Terms for Brazing, Soldering Thermal Spraying andThermal
Cutting
Standard Method for Evaluatingthe Strength of Brazed Joints in Shear R(1992)
Specification for TorchBrazing
Specification for InductionBrazing
Specification for FurnaceBrazing
Specification for AluminumBrazing
Specification for UnderwaterWelding
Standard Procedures forCalibrating Magnetic Instruments to Measure the Delta Ferrite Content ofAustenitic
and Duplex Ferritic-Austenitic Stainless Steel Weld Metal
Standard Methods for Determinationof the Diffusible Hydrogen Content of Martensitic, Bainitic, and
FerriticSteel Weld Metal Produced by Arc Welding
Standard Methods forMechanical Testing of Welds
Specification for Carbon SteelElectrodes for Shielded Metal Arc Welding
Filler Metal ProcurementGuidelines
Specification for Carbon andLow Alloy Steel Rods for Oxyfuel Gas Welding
Specification for Aluminum andAluminum-Alloy Electrodes for Shielded Metal Arc Welding
Specification for Stainless SteelElectrodes for Shielded Metal Arc Welding Supersedes SAE AMS 5777
Specification for Low-AlloySteel Electrodes for Shielded Metal Arc Welding
Specification for CoveredCopper and Copper Alloy Arc Welding Electrodes R(1991)
Specification for Copper andCopper Alloy Bare Welding Rods and Electrodes R(1991)
Specification for FillerMetals for Brazing and Braze Welding
Specification for BareStainless Steel Welding Electrodes and Rods
Specification for BareAluminum and Aluminum-Alloy Welding Electrodes and Rods
Specification for Nickel andNickel-Alloy Welding Electrodes for Shielded Metal Arc Welding

Specification for Tungsten andTungsten-Alloy Electrodes for Arc Welding and Cutting
Specification for SurfacingElectrodes for Shielded Metal Arc Welding
Specification for Nickel andNickel-Alloy Bare Welding Electrodes and Rods
Specification for Welding Electrodesand Rods for Cast Iron
Specification for Titanium andTitanium Alloy Welding Electrodes and Rods
Specification for Carbon SteelElectrodes and Fluxes for Submerged Arc Welding
Specification for Carbon SteelElectrodes and Rods for Gas Shielded Arc Welding
Specification for MagnesiumAlloy Welding Electrodes and Rods
Specification for Carbon SteelElectrodes for Flux Cored Arc Welding
Specification for Stainless SteelElectrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods
forGas Tungsten Arc Welding
Specification for Low AlloySteel Electrodes and Fluxes for Submerged Arc Welding
Specification for Zirconiumand Zirconium Alloy Welding Electrodes and Rods
Specification for Carbon andLow-Alloy Steel Electrodes and Fluxes for Electroslag Welding
Specification for Carbon andLow-Alloy Steel Electrodes and Electrogas Welding
Specification for Low-AlloySteel Electrodes and Rods for Gas Shielded Arc Welding
Specification for Low-AlloySteel Electrodes for Flux Cored Arc Welding
Specification for ConsumableInserts
Recommended Practices for StudWelding
Recommended Practices for GasTungsten Arc Welding R(1994)
Sheet Metal Welding Code
Specification for Welding ofIndustrial and Mill Cranes and Other Material Handling Equipment
Specification for WeldingEarthmoving and Construction Equipment
Specification for Welding ofRotating Elements of Equipment
Railroad Welding Specification- Cars and Locomotives
Safety in Welding, Cutting andAllied Processes
(Withdrawn) Work Practices forAsbestos-Cement Pipe
Steel Pipe - A Guide forDesign and Installation Third Edition
Cement-Mortar ProtectiveLining and Coating for Steel Water Pipe - 4 in. (100 mm) and Larger - ShopApplied
Cold-Water Meters - CompoundType
PVC Pipe - Design andInstallation
Welded Steel Tanks for WaterStorage
Coating Steel Water-StorageTanks

Cement-Mortar Lining forDuctile-Iron Pipe and Fittings for Water

Polyethylene Encasement forDuctile-Iron Pipe Systems
Ductile-Iron and Gray-IronFittings, 3 in. Through 48 in. (76 mm Through 1219 mm), for Water
Erratum:October 1999
Rubber-Gasket Joints forDuctile-Iron Pressure Pipe and Fittings
Flanged Ductile-Iron Pipe withDuctile-Iron or Gray- Iron Threaded Flanges
Ductile-Iron Pipe,Centrifugally Cast, for Water
Ductile-Iron Compact Fittings,for Water Service
Steel Water Pipe - 6 in. (150mm) and Larger
Coal-Tar Protective Coatingsand Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied
AddendaC203a - 1999
Field Welding of Steel Water Pipe
Steel Pipe Flanges forWaterworks Service - Sizes 4 in. Through 144 in. (100 mm Through 3,600 mm)Erratum December 1994
Dimensions for FabricatedSteel Water Pipe Fittings
Cold-Applied Tape Coatings forthe Exterior of Special Sections, Connections, and Fittings for Steel
WaterPipelines
Liquid-Epoxy Coating Systemsfor the Interior and Exterior of Steel Water Pipelines
Fusion-Bonded Epoxy Coatingfor the Interior and Exterior of Steel Water Pipelines
Tape Coating Systems for theExterior of Steel Water Pipelines
Hypochlorites
Reinforced Concrete PressurePipe, Steel-Cylinder Type
Liquid Chlorine
Prestressed Concrete PressurePipe, Steel-Cylinder Type Erratum - January 2000
Reinforced Concrete PressurePipe, Noncylinder Type
Concrete Presure Pipe,Bar-Wrapped, Steel-Cylinder Type
Asbestos-Cement Pressure Pipe,4 in. Through 16 in. (100 mm Through 400 mm), for Water Distribution
Systems
Asbestos-Cement TransmissionPipe, 18 in. Through 42 in. (450 mm Through 1,050 mm), for Water
SupplyService
Selection of Asbestos-CementTransmission Pipe, Sizes 18 in. Through 42 in. (450 mm Through 1,050 mm),
forWater Supply Service
Metal-Seated Gate Valves forWater Supply Service; Addendum C500A - 1995
Sodium Polyphosphate, Glassy(Sodium Hexametaphosphate) Addendum B502A 1997
Dry-Barrel Fire Hydrants IncorporatesAddendum C502A-95
Wet-Barrel Fire Hydrants
Rubber-Seated Butterfly Valves
Swing-Check Valves forWaterworks Service, 2 in. (50 mm) Through 24 in. (600 mm) NPS

Resilient-Seated Gate Valvesfor Water Supply Service Addendum C509A-95

Double Check Valve BackflowPrevention Assembly
Reduced-Pressure PrincipleBackflow Prevention Assembly
Protective Epoxy InteriorCoatings for Valves and Hydrants
Installation of Ductile-IronWater Mains and Their Appurtenances
Installation ofAsbestos-Cement Pressure Pipe R(2000)
Grooved and Shouldered Joints
Disinfecting Water Mains
Disinfection of Water- StorageFacilities
Cold-Water Meters - DisplacementType, Bronze Main Case First Edition
Cold-Water Meters - TurbineType, for Customer Service
Cold-Water Meters - FireService Type
Propeller-Type Meters forWaterworks Applications Second Edition
Underground Service LineValves and Fittings
Polyvinyl Chloride (PVC)Pressure Pipe and Fabricated Fittings, 4 in. Through 12 in.(100 mm Through300
mm), for Water Distribution
Polyethylene (PE) PressurePipe and Tubing, 1/2 in. (13 mm) Through 3 in, (76 mm), for Water Service
Butts and Hinges
Bored and Preassembled Locks& Latches
Exit Devices (BHMA 701)
Door Controls - Closers (BHMA301)
Auxiliary Locks &Associated Products (BHMA 501)
Architectural Door Trim (BHMA1001)
Template Hinge DimensionsR(1997)
Door Controls - Overhead Stopsand Holders (BHMA 311)
Cabinet Hardware (BHMA 201)
Power Operated PedestrianDoors
Cabinet Locks
Interconnected Locks &Latches
Mortise Locks & Latches(BHMA 621)
Sliding & Folding DoorHardware
Closer Holder Release Devices(Revision of: ANSI A156.15-1986)
Auxiliary Hardware
Self Closing Hinges &Pivots
Materials and Finishes (BHMA1301)

Power Assist and Low EnergyPower Operated Doors

Strap and Tee Hinges and HaspsR(1996)
Thresholds
Electromagnetic Locks
Delayed Egress Locks
Referenced Standards EighthEdition

Basic Principles EighthEdition

Sizing the Building WaterSupply Distribution System Eighth Edition

Rates of Rainfall for VariousCities a (in./hr) Eighth Edition

Tables, Rules and ConversionCalculations Eighth Edition

Gas Piping Systems EighthEdition

Index Eighth Edition

Administration and EnforcementEighth Edition

Definitions Eighth Edition

General Regulations EighthEdition

Materials Eighth Edition

Joints and Connections EighthEdition

Sanitary Drainage SystemsEighth Edition

Indirect Waste Piping andSpecial Waste Eighth Edition

Storm Drainage Systems EighthEdition

Vents and Venting EighthEdition

Traps, Interceptors,Separators, and Backwater Valves Eighth Edition

Drainage Pipe Cleanouts EighthEdition

Plumbing Fixtures EighthEdition

Hangers and Supports EighthEdition

Health Care Plumbing EighthEdition

Water Supply and DistributionEighth Edition

Individual Water Supply EighthEdition

Inspection, Tests andMaintenance Eighth Edition

Engineered Plumbing SystemsEighth Edition

BOCA National PlumbingCode/1990 Eighth Edition

BOCA National PlumbingCode/1990 Eighth Edition

Safety Requirements forAbrading Materials with Coated Abrasives Systems

"V" Blocks andClamps, Standard for
Fiber Ropes: General Standard
Polypropylene: 3 and 8 Strand
PET/Polypro Combo: 3 Strand
Nylon Polyamide: 3 and 8Strand
Polyester (PET): 3 and 8Strand
Polyester SB: 12 Strand Braid
Nylon DB: Double Braid
Polyester DB: Double Braid
Manilla: 3 Strand
Standard Specification forHubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Wasteand
Vent Piping Applications
Masterformat: Master List ofTitles and Numbers for the Construction Industry (Pressure Vessels)
Section Format (PressureVessels)
Page Format (Pressure Vessels)
Acceptance Test Code for WaterCooling Towers (CTI Code Tower Standard Specifications)
(Withdrawn) Standard SteelDoor and Steel Frame Preparation for Floor Closers Light Duty, Center
Hung,Single or Double Acting; Center Hung, Single of Double Acting;
Guidelines for Using PlasticEncapsulated Microcircuits and Semiconductors in Military, Aerospace andOther
Rugged Applications
Requirements for ElectronicGrade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for
ElectronicSoldering Applications Amendment 1 - August 1996
(Withdrawn) FOTP-83 Cable toInterconnecting Device Axial Compressive Loading Withdrawn - April 1995;
*NOTCURRENT DOCUMENT
(Withdrawn) FOTP-29 RefractiveIndex Profile, Transverse Interference Method Formerly Standards Proposal
No.4537
FOTP-171 Attenuation bySubstitution Measurement for Short-Length Multimode Graded-Index and
SingleMode Optical Fiber Cable Assemblies Upgrade and Revision of TIA/EI
(Withdrawn) Guidance for theSelection of Critical Manufacturing Operations for Use in Implementing an
SPCSystem for Passive Components

IC Latch-Up Test Errata -January 1998

Electrical PerformanceStandards - Monochrome Television Studio Facilities
One-Inch Perforated TapeR(1993)
Interface between DataTerminal Equipment and Data Circuit-Terminating Equipment Employing SerialBinary
Data Interchange
Axis and Motion Nomenclaturefor Numerically Controlled Machines
Interchangeable Variable BlockData Format for Positioning, Contouring, and
Contouring/PositioningNumerically Controlled Machines R(1988)
Mounting Dimensions forLoudspeakers
Cable Connectors for AudioFacilities for Radio Broadcasting Correction Sheet
Cabinets, Racks, Panels, andAssociated Equipment
Electrical PerformanceStandards for High Resolution Monochrome Closed Circuit Television Camera
American National StandardCode for Information Interchange for Numerical Machine Control
Standard Colors for ColorIdentification and Coding
Special Colors
TP-07B Contact AxialConcentricity Test Procedure for Electrical Connectors
TP-11A Resistance to SolventsTest Procedure for Electrical Connectors and Sockets
TP-35A Insert Retention TestProcedure for Electrical Connectors R(1990)
TP-56 Resistance to SolderingHeat Test Procedure for Electrical Connectors
TP-05B Contact Insertion,Release and Removal Force Test Procedure for Electrical Connectors FSC
5935;Should Be Used Instead of MIL-STD-1344, Method 2012.1
TP-08B Crimp Tensile StrengthTest Procedure for Electrical Connectors FSC 5935; Should Be Used Instead
ofMIL-STD-1344, Method 2003.1
TP-24B Maintenance Aging TestProcedure for Electrical Connectors FSC 5935; Should Be Used Instead
ofMIL-STD- 1344, Method 2002.1
TP-25C Probe Damage TestProcedure for Electrical Connectors FSC 5935; Should Be Used Instead ofMILSTD- 1344, Method 2006.1
TP-29B Contact Retention TestProcedure for Electrical Connectors FSC 5935; Should Be Used Instead ofMILSTD- 1344, Method 2007.1
TP-37B Contact Engagement andSeparation Force Test Procedure for Electrical Connectors FSC 5935; Should
BeUsed Instead of MIL-STD-1344, Method 2014
TP-38B Cable Pull-Out TestProcedure for Electrical Connectors
TP-40B Crush Test Procedurefor Electrical Connectors FSC 5935; Should Be Used Instead of MIL-STD1344,Method 2008.1
TP-41C Cable Flexing TestProcedure for Electrical Connectors
TP-54A Magnetic Permeabilityfor Test Procedure for Electrical Connectors, Contacts, and Sockets
TP-71A Solder Wicking (WaveSolder Technique) Test Procedure for Electrical Connectors and Sockets
TP-99 Gage Location andRetention Test Procedure for Electrical Connectors

TP-104A Flammablility TestProcedure for Electrical Connectors

TP-105 Altitude - LowTemperature Test Procedure for Electrical Connectors
Preferred Values R(1983)
Electrical PerformanceStandards for Direct View High Resolution Monochrome Closed CircuitTelevision
Monitors
Fiber Optic Terminology
FOTP-34 Interconnection DeviceInsertion Loss Test
FOTP-65 Optical Fiber FlexureTest
FOTP-174 Mode Field Diameterof Single-Mode Optical Fiber by Knife-Edge Scanning in the Far Field
FOTP-21 Mating Durability ofFiber Optic Interconnecting Devices
FOTP-23 Air Leakage Testing ofFiber Optic Component Seals R(1996)
FOTP-26 Crush Resistance ofFiber Optic Cable Interconnecting Devices R(1996)
FOTP-33 Fiber Optic CableTensile Loading and Bending Test
FOTP-88 Fiber Optic Cable BendTest
FOTP-91 Fiber Optic CableTwist-Bend Test R(1996)
FOTP-179 Inspection of CleavedFiber End Faces by Interferometry
FOTP-3 Procedure to MeasureTemperature Cycling Effects on Optical Fibers, Optical Cable, and OtherPassive
Fiber Optic Components Replaces 455-52-83
FOTP-6 Cable Retention TestProcedure for Fiber Optic Cable Interconnecting Devices
FOTP-14 Fiber Optic ShockTests (Specified Pulse)
FOTP-15 Altitude/Immersion ofFiber Optic Components
FOTP-22 Ambient LightSusceptibility of Fiber Optic Components
FOTP-24 Water Peak AttenuationMeasurement of Single- Mode Fibers
FOTP-30 Frequency DomainMeasurement of Multimode Optical Fiber Information Transmission Capacity
FOTP-37 Low or HighTemperature Bend Test for Fiber Optic Cable
FOTP-42 Optical Crosstalk inFiber Optic Components

FOTP-46 Spectral AttenuationMeasurement for Long- Length, Graded-Index Optical Fibers

FOTP-47 Output Far FieldRadiation Pattern Measurement
FOTP-48 Measurement of OpticalFiber Cladding Diameter Using Laser-Based Instruments
FOTP-51 Pulse DistortionMeasurement of Multimode Glass Optical Fiber Information TransmissionCapacity
FOTP-53 Attenuation bySubstitution Measurement for Multimode Graded-Index Optical Fibers or
FiberAssemblies Used in Long Length Communications Systems
FOTP-58 Core DiameterMeasurement of Graded-Index Optical Fibers
FOTP-60 Measurement of Fiberor Cable Length Using an OTDR
FOTP-62 Measurement of OpticalFiber Macrobend Attenuation
FOTP-77 Procedures to Qualifya Higher-Order Mode Filter for Measurements on Single-Mode Fiber
FOTP-78 Spectral-AttenuationCutback Measurement for Single-Mode Optical Fibers R(1998)
FOTP-82 Fluid Penetration Testfor Fluid-Blocked Fiber Optic Cable
FOTP-127 SpectralCharacterization of Multimode Laser Diodes
FOTP-167 Mode Field Diameter,Variable Aperture in the Far Field
FOTP-173 Coating GeometryMeasurement for Optical Fiber Side-View Method
FOTP-188 Low TemperatureTesting of Fiber Optic Components
FOTP-86 Fiber Optic CableJacket Shrinkage
FOTP-2 Impact TestMeasurements for Fiber Optic Devices
FOTP-4 Fiber Optic ComponentTemperature Life Test
FOTP-5 Humidity Test Procedurefor Fiber Optic Components
FOTP-16 Salt Spray (Corrosion)Test for Fiber Optic Components R(2000)
FOTP-20 Measurement of Changein Optical Transmittance
FOTP-25 Repeated ImpactTesting of Fiber Optic Cables and Cable Assemblies

FOTP-28 Measuring DynamicStrength and Fatigue Parameters of Optical Fibers by Tension

FOTP-31 Proof Testing OpticalFibers by Tension
FOTP-32 Fiber Optic CircuitDiscontinuities R(1999)
FOTP-39 Optical Fiber CableWater Wicking Test
FOTP-41 Compressive LoadingResistance of Fiber Optic Cables
FOTP-43 Output Near-FieldRadiation Pattern Measurement of Optical Waveguide Fibers
FOTP-44 Refractive IndexProfile, Refracted Ray Method
FOTP-50 Light LaunchConditions for Long-Length Graded- Index Optical Fiber Spectral
AttenuationMeasurements
FOTP-54 Mode ScramblerRequirements for Overfilled Launching Conditions to Multimode Fibers
FOTP-55 End-View Methods forMeasuring Coating and Buffer Geometry of Optical Fibers
FOTP-56 Test Method forEvaluating Fungus Resistance of Optical Fiber and Cable
FOTP-57 Preparation andExamination of Optical Fiber Endface for Testing Purposes
FOTP-58 Core DiameterMeasurement of Graded-Index Optical Fibers Revision of TIA/EIA-455-58A
FOTP-67 Procedure forAssessing High Temperature Exposure Effects on Optical Characteristics ofOptical
Fibers
FOTP-75 Fluid Immersion AgingProcedure for Optical Fiber Mechanical Properties
Method for Measuring DynamicFatigue of Optical Fibers by Tension
FOTP-80 Measurement of Cut-OffWavelength of Single- Mode Fiber by Transmitted Power
FOTP-81 Compound Flow (Drip)Test for Filled Fiber Optic Cable
FOTP-84 Jacket Self-Adhesion(Blocking) Test for Optical Fiber Cable R(1998)
FOTP-87 Fiber Optic Cable KnotTest R(1999)
FOTP-100 Gas Leakage Test forGas-Blocked Fiber Optic Cables R(1999)
FOTP-104 Fiber Optic CableCyclic Flexing Test

FOTP-107 Determination ofComponent Reflectance or Link/System Return Loss Using a Loss Test
SetRevision of EIA/TIA-455-107
FOTP-168 Chromatic DispersionMeasurement of Multimode Graded-Index and Single-Mode Optical Fibers
bySpectral Group Delay Measurement in the Time Domain R(1999)
FOTP-175 Chromatic DispersionMeasurement of Single- Mode Optical Fibers by the Differential Phase
ShiftMethod
FOTP-176 Method for MeasuringOptical Fiber Cross- Sectional Geometry by Automated Grey-Scale Analysis
FOTP-177 Numerical ApertureMeasurement of Graded- Index Optical Fibers
FOTP-178 Measurements of StripForce for Mechanically Removing Coatings from Optical Fibers
FOTP-184 Coupling ProofOverload Test for Fiber Optic Interconnecting Devices R(1999)
Fixed Aluminum ElectrolyticCapacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) andfor
Standard Duty (Type 2)
Group 3 Facsimile Apparatusfor Document Transmission
Procedures for DocumentFacsimile Transmission
Standard Test Method forDestructive Physical Analysis (DPA) of Ceramic Monolithic Capacitors
Telecommunications-TelephoneTerminal Equipment - Performance and Compatibility Requirements for
TelephoneSets with Loop Signalling
Multi-Line Key TelephoneSystems (KTS) for Voiceband Applications R(1988)
Standard Method of Test forEffective Series Resistance (ESR) and Capacitance of Multilayer
CeramicCapacitors at High Frequencies Editorially Corrected - February 19
Line Circuit (Card) for 1A2Generic Multi-Line Key Telephone Systems
32 Bit Binary CL (BCL) and 7Bit ASCII CL (ACL) Exchange Input Format for Numerically Controlled
Machines
Standard Methods forMeasurement of the Equivalent Electrical Parameters of Quartz Crystal Units,1 kHz to 1
GHz
Standard Methods forMeasurement of the Equivalent Electrical Parameters of Quartz Crystal Units,1 kHz to 1
GHz
Sectional Specification forPushbutton Switches of Certified Quality
Detail Specification forNonsensitive Pushbutton Switch Single-Pole Contact
Detail Specification forNonsensitive Pushbutton Switch Momentary Contact
Sectional Specification forSensitive Switches of Certified Quality
Blank Detail Specification forSpecial-Use Sensitive Switches of Certified Quality
Detail Specification forSensitive Switches, Single Break Contacts, Basic Size

Detail Specification forSensitive Switches, Single Break Contacts, Miniature Size

Detail Specification forSensitive Switches, Single Break Contacts, Subminiature Size 5 A
Detail Specification forSensitive Switches, Single Break Contacts, Sub-Subminiature Size 7 A
OFSTP-4A Optical Eye PatternMeasurement Procedure
OFSTP-10 Measurement ofDispersion Power Penalty in Digital Single-Mode Systems R(1998)
OFSTP-14 Optical Power LossMeasurements of Installed Multimode Fiber Cable Plant
Method Selection forAssessment of Nonconforming Levels in Parts per Million (PPM)
Statistical Process ControlSystems
Zero Acceptance NumberSampling Procedures and Tables for Inspection by Attributes of a
ContinuousManufacturing Process
Zero Acceptance NumberSampling Procedures and Tables for Inspection by Attributes of Isolated Lots
Optical Fiber Cable ColorCoding
Fiber Optic ConnectorIntermateability Standards (FOCIS) R(2000)
National Consensus Standardfor Configuration Management
Industry Implementation ofInternational Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard
forinformation Technology - Software Life Cycle Processes - Life Cycle
Industry Implementation ofInternational Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard
forInformation Technology - Software Life Cycle Processes - Implementa
Generic Specification forSpecial-Use Electromechanical Switches of Certified Quality
Weather-Resistant PolyolefinCovered Wire & Cable
Communications Wire and Cablefor Wiring of Premises
Primary Batteries - Part 1:General Ninth Edition
Primary Batteries - Part 2:Physical and Electrical Specifications Tenth Edition
Helical-Scan Video TapeCassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS Part 1:
VHSand Compact VHS Video Cassette System First Edition; (CENELEC EN
Helical-Scan Video TapeCassette System Using 8 mm Magnetic Tape - 8 mm Video Part 1:
GeneralSpecifications Second Edition
Helical-Scan Video TapeCassette System Using 8 mm Magnetic Tape - 8 mm Video Part 3: HighBandSpecifications for Hi 8 First Edition; CENELEC EN 60843-3: 1993
Helical-Scan Video TapeCassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS CompactVHS Video Cassette First Edition
Reference Tapes for Video TapeRecorder Systems First Edition; CENELEC EN 61105: 1993

Standard General Principlesfor Temperature Limits in the Rating of Electric Equipment and for theEvaluation
of Electrical Insulation R(1992)
Standard for Use of theInternational System of Units (SI): the Modern Metric System Revision
andRedesignation of ANSI/IEEE Std 268-1992 and ASTM E380
Code for Electricity Metering8th Edition Revised and Redesignated to ANSI/NEMA C12.1 - 1995
Standard for Mechanical DemandRegisters (ANSI/IEEE) R(1990)
American National StandardRequirements for Watthour Meter Sockets (ANSI/IEEE)
Instrument Transformers forRevenue Metering, 10 kV BIL Through 350 kV (0.6 kV NSV Through 69 kV
NSV)
Standard Requirements,Terminology, and Test Procedure for Neutral Grounding Devices R(1991)
Graphic Symbols for ElectricalWiring and Layout Diagrams Used in Architecture and Building
Construction(ANSI/IEEE) R(1989)
Standard Test Procedure for ACHigh-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
(ANSI/IEEE)
Supplement to IEEE StandardTest Procedure for AC High- Voltage Circuit Breakers Rated on a
SymmetricalCurrent Basis
Supplement to IEEE StandardTest Procedure for AC High- Voltage Circuit Breakers Rated on a
SymmetricalCurrent Basis
Supplement to IEEE StandardTest Procedure for AC High- Voltage Circuit Breakers Rated on a
SymmetricalCurrent Basis
Supplement to IEEE StandardTest Procedure for AC High- Voltage Circuit Breakers Rated on a
SymmetricalCurrent Basis
Standard for Low-Voltage ACPower Circuit Breakers Used in Enclosures (ANSI/IEEE)
Standard for Metal-EnclosedLow-Voltage Power Circuit Breaker Switchgear (ANSI/IEEE)
Standard for Metal-CladSwitchgear (ANSI/IEEE)
Metal-Enclosed InterrupterSwitchgear (ANSI/IEEE) R(1992)
Standard Requirements forHigh-Voltage Switches (ANSI/IEEE)
Standard for Relays and RelaySystems Associated with Electric Power Apparatus (ANSI/IEEE) R(1994)
Standard Surge WithstandCapability (SWC) Tests for Protective Relays and Relay Systems R(1994)
Recommended Practice forTesting Insulation Resistance of Rotating Machinery (ANSI/IEEE)
Recommended Practice forElectric Installations on Shipboard Corrections December 17, 1998
Standard Test Procedures andRequirements for Alternating-Current Cable Terminations 2.5 kV Through 765
kV
Standard General Requirementsfor Liquid-Immersed Distribution, Power, and Regulating
Transformers(ANSI/IEEE)
Standard General Requirementsfor Dry-Type Distribution and Power Transformers Including Those withSolidCast and/or Resin-Encapsulated Windings (ANSI/IEEE)
Standard Terminology for Powerand Distribution Transformers (ANSI/IEEE) R(1992)
Standard Test Code forLiquid-Immersed Distribution, Power, and Regulating Transformers (ANSI/IEEE)
Standard Test Code forDry-Type Distribution and Power Transformers
Standard Requirements forInstrument Transformers (ANSI/IEEE)

Recommended Practice forInstallation, Application, Operation, and Maintenance of Dry-Type GeneralPurpose

Distribution and Power Transformers (ANSI/IEEE) R(1987)
Standard for GappedSilicon-Carbide Surge Arresters for AC Power Circuits (ANSI/IEEE) R(1994)
Standard for Metal-Oxide SurgeArresters for AC Power Circuits (&T; 1kV) (ANSI/IEEE)
IEEE Recommended Practice onSurge Voltages in Low- Voltage AC Power Circuits (ANSI/IEEE)
American National StandardDictionary for Technologies of Electromagnetic Compatibility
(EMC),Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD)
Guide for Measuring EarthResistivity, Ground Impedance, and Earth Surface Potentials of a GroundSystem
Standard Graphic Symbols forLogic Functions Revision of ANSI Y32.14-73 (ANSI/IEEE) R(1994)
Supplement to IEEE Standardfor Graphic Symbols and Logic Functions R(1994)
Standard for Safety Levelswith Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz
to 300 GHz (ANSI/IEEE)
Recommended Practice for theMeasurement of Potentially Hazardous Electromagnetic Fields - RF
andMicrowave Revision of ANSI C95.3-1973 and ANSI C95.5- 1981 (ANSI/IEE
Standard Test Procedure forPolyphase Induction Motors and Generators (ANSI/IEEE)
Standard Definitions of Termsfor Antennas (ANSI/IEEE)
Audio Program LevelMeasurement
Standard on PiezoelectricitySupersedes 177-68, 178- 58, 179-61
American National StandardLetter Symbols for Units of Measurement (SI Units, Customary Inch-PoundUnits,
and Certain Other Units) Revision and Redesignation of IEEE
Standard Letter Symbols forQuantities Used in Electrical Science and Electrical Engineering Revision ofANSI
Y10.5-1968 R(1997)
Standard Method for Measuringthe Effectiveness of Electromagnetic Shielding Enclosures
Graphic Symbols for Electricaland Electronics Diagrams (Including Reference Designation Class
DesignationLetters) CSA Z99-75; Supersedes ANSI Y32.2- 75 (ANSI/IEEE)
Supplement to Graphic Symbolsfor Electrical and Electronics Diagrams Supplement to ANSI Y32.2-75 and
IEEE315-75 R(1994)
Standard for Type Test ofClass IE Electric Cables, Field Splices, and Connections for Nuclear
PowerGenerating Stations (ANSI/IEEE) R(1992)
Standard for SeparableInsulated Connector Systems for Power Distribution Systems Above 600 V(ANSI/IEEE)
Guide for MakingHigh-Direct-Voltage Tests on Power Cable Systems in the Field
Standard for Cable Joints forUse with Extruded Dielectric Cable Rated 5000-138 000 V and Cable Joints
forUse with Laminated Dielectric Cable Rated 2500-500 000 V
Standard Definitions forExcitation Systems for Synchronous Machines Revision of IEEE Std 421-1972R(1996)
Guide for InsulationMaintenance for Rotating Electric Machinery (5 hp to Less Than 10 000 hp)(ANSI/IEEE)
Standard Test Procedure forMeasuring Longitudinal Balance of Telephone Equipment Operating in the
VoiceBand (ANSI/IEEE) R(1992)
Standard Letter Designationsfor Radar-Frequency Bands R(1990)
Recommended Practice forElectric Systems in Health Care Facilities IEEE White Book
Standard Radar Definitions

Recommended Practice forPreferred Metric Units for Use in Electrical and Electronics Science andTechnology
R(1997)
Standard for Logic CircuitDiagrams R(1994)
Information Technology -Portable Operating System Interface (POSIX) - Part 1: System ApplicationProgram
Interface (API) (C Language) ISO/IEC 9945-1: 1996 (E); Incor
Standard VHDL LanguageReference Manual IEEE Computer Society Document
Industry Implementation ofInternational Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard
forInformation Technology - Software Life Cycle Processes
Industry Implementation ofInternational Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard
forInformation Technology - Software Life Cycle Processes - Life Cycl
Industry Implementation ofInternational Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard
forInformation Technology - Software Life Cycle Processes - Implement
Requirements for SolderingFluxes; (Amendment 1 - 1996)
Requirements for SolderingPastes; (Amendment 1 - 1996)
Requirements for ElectronicGrade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for
ElectronicSoldering Applications; (Amendment 1 - 1996)
(Withdrawn) Flexible AdhesiveBonding Films
(Withdrawn) Glass FabricWeight Renumbered to 2.1.6.1
Terms and Definitions forInterconnecting and Packaging Electronic Circuits
Specification for FinishedFabric Woven from "E" Glass for Printed Boards Amended Sheets -December 1991
Specification for FinishedFabric Woven from "S" Glass for Printed Boards
Specification for FinishedFabric Woven from Aramid for Printed Boards
Specification for FinishedFabric Woven from Quartz (Pure Fused Silica) for Printed Boards
Flexible Base Dielectrics forUse in Flexible Printed Wiring Amendment 1:10/00/95
Adhesive Coated DielectricFilms for Use as Cover Sheets for Flexible Printed Wiring and Flexible
BondingFilms Revision C
Flexible Metal-CladDielectrics for Use in Fabrication of Flexible Printed Wiring Amendment1:10/00/95
Guidelines for SelectingPrinted Wiring Board Sizes Using Standard Panel Sizes R(1991)
Computer Numerical ControlFormatting for Drillers and Routers R(1993)
Printed Board Description inDigital Form Revision D - July 1992
Bare Substrate Electrical TestData Format
Design and End ProductRequirements for Discrete Wiring Boards
Test Methods Manual
Test Methods Manual
Thread Count of Glass Fabric;Revision C - December 1994 (Test Methods Manual)
Surface Scratch ExaminationMetal Clad Foil (Test Methods Manual)

Chemical Cleaning of MetalClad Laminate; Revision B - May 1986 (Test Methods Manual)
Chemical Resistance ofLaminates, Prepreg, and Coated Foil Products, by Solvent Exposure; Revision ADecember 1994 (Test Methods Manual)
Chemical Resistance of CoreMaterials to Methylene Chloride (Test Methods Manual)
Cupric Chloride EtchingMethod; Revision A - December 1994 (Test Methods Manual)
Flammability of Prepreg andThin Laminate Revision D (Test Methods Manual)
Flammability of Laminate;Revision B - December 1994 (Test Methods Manual)
Resin Content of Prepreg, byBurn-Off; Revision B - December 1994 (Test Methods Manual)
Resin Content of Prepreg, byTreated Weight; Revision C - December 1994 (Test Methods Manual)
Resin Flow Percent of PrepregRevision D (Test Methods Manual)
Resin Flow of "NoFlow" Prepreg Revision B (Test Methods Manual)
Gel Time for PrepregMaterials; Revision A - April 1986 (Test Methods Manual)
Volatile Content of Prepreg;Revision C - December 1994 (Test Methods Manual)
Flux Induced Corrosion (CopperMirror Method) (Test Methods Manual)
Presence of Halides in Flux,Silver Chromate Method Revision C - January 1995 (Test Methods Manual)
Solids Content, Flux; RevisionB - January 1995 (Test Methods Manual)
Halide Content, Quantitative(Chloride & Bromide); Revision B - January 1995 (Test Methods Manual)
Flexural Strength of Laminates(at Ambient Temperature); Revision B - December 1994 (Test Methods Manual)
Flexural Strength of Laminates(at Elevated Temperature); Revision A - December 1994 (Test Methods Manual)
Peel Strength of Metallic CladLaminates; Revision C - December 1994 (Test Methods Manual)
Peel Strength of Metallic CladLaminates at Elevated Temperature (Hot Fluid Method); Revision A December1994 (Test Methods Manual)
Glass Transition Temperatureand Z-Axis Thermal Expansion by TMA; Revision C - December 1994 (Test
MethodsManual)
Glass Transition Temperatureand Cure Factor by DSC; Revision C - December 1994 (Test Methods Manual)

Prepreg Scaled Flow Testing(Test Methods Manual)

Dimensional Stability, GlassReinforced Thin Laminates; Revision A - February 1986 (Test Methods Manual)
Coefficient of Linear ThermalExpansion of Electrical Insulating Materials (Test Methods Manual)
Coefficient of ThermalExpansion by the Vitreous Silica (Quartz) Dilatometer Method Revision A (TestMethods
Manual)
Arc Resistance of PrintedWiring Material; Revision B - May 1986 (Test Methods Manual)
Dielectric Constant and DissipationFactor of Printed Wiring Board Material - Clip Method (Test Methods
Manual)
Stripline Test forPermittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) atX-Band Revision
C (Assembly-Joining Handbook)
Stripline Test for ComplexRelative Permittivity of Circuit Board Materials to 14 GHz (AssemblyJoiningHandbook)
Permittivity (DielectricConstant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid CellMethod);
Revision C - December 1987 (Test Methods Manual)
Dielectric Breakdown of RigidPrinted Wiring Material; Revision B - May 1986 (Test Methods Manual)
Electric Strength of PrintedWiring Material Revision A (Test Methods Manual) R(1998)
Volume and Surface Resistivityof Dielectric Materials; Revision A - December 1994 (Test Methods Manual)
Q Resonance, Flexible PrintedWiring Materials; Revision A - April 1988 (Test Methods Manual)
Fungus Resistance PrintedWiring Materials Revision E (Test Methods Manual)
Water Absorption, Metal CladPlastic Laminates; Revision A - May 1986 (Test Methods Manual)
Moisture and InsulationResistance, Printed Boards Revision E (Test Methods Manual)
Surface Insulation Resistance,Fluxes; Revision A - January 1995 (Test Methods Manual)
Hydrolytic Stability, FlexiblePrinted Wiring Material (Test Methods Manual)
Certification of FacilitiesThat Inspect/Test Printed Boards, Components and Materials
Qualification and Performanceof Permanent Solder Mask
Generic Standard on PrintedBoard Design Amendment 1: January 2000
Sectional Design Standard forFlexible Printed Boards Supersedes IPC-D-249
Temperature MeasurementThermocouples
Photography - DensityMeasurements - Part 4: Geometric Conditions for Reflection Density SecondEdition
Aircraft - Fuel Nozzle GroundingPlugs and Sockets First Edition
Cylindrical Gears for GeneralEngineering and for Heavy Engineering - Modules Second Edition

Conical Fittings with a 6 %(Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part1:
General Requirements First Edition; CEN EN 20594-1: 1993
Conical Fittings with a 6 %(Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part2:
Lock Fittings Second Edition
Series 1 Freight Containers - Classification,Dimensions and Ratings Fifth Edition
Freight Containers -Vocabulary Second Edition
SI Units and Recommendationsfor the Use of Their Multiples and of Certain Other Units Third
Edition;Amendment 1: 11-01-1998
Vocabulary of Gear Terms -Part 1: Definitions Related to Geometry Second Edition; Corrigendum 1:11-01-99
Series 1 Freight Containers -Corner Fittings - Specification Fourth Edition; Corrigendum 1-1990;
AS/NZS3711.3: 1993
Rolling Bearings - InstrumentPrecision Bearings First Edition
Series 1 Freight Containers -Specification and Testing - Part 1: General Cargo Containers for GeneralPurposes
Amendment 1: 1AAA and 1BBB Containers Fifth Edition; A
Series 1 Freight Containers -Specification and Testing - Part 2: Thermal Containers Fourth Edition
Series 1 Freight Containers -Specification and Testing - Part 3: Tank Containers for Liquids, Gases
andPressurized Dry Bulk Fourth Edition; PNS 924-3: 1992
Rolling Bearings - Balls -Dimensions and Tolerances Second Edition
Hot-Rolled Carbon Steel Sheetof Commercial and Drawing Qualities Third Edition
Cold-Reduced Carbon SteelSheet of Commercial and Drawing Qualities Third Edition
Continuous Hot-Dip Zinc-CoatedCarbon Steel Sheet of Commercial, Lock-Forming and Drawing Qualities
SecondEdition
Rubber Hoses for Sand and GritBlasting - Specification Second Edition
Cold-Reduced Carbon SteelStrip with a Carbon Content over 0,25% Second Edition
Hot-Rolled Steel Sheet ofStructural Quality Third Edition
Hot-Rolled Steel Sheet of HighYield Stress Structural Quality Third Edition
Cold-Reduced Steel Sheet ofStructural Quality Third Edition
Continuous Hot-Dip Zinc-CoatedCarbon Steel Sheet of Structural Quality Third Edition
Continuous Hot-Dip Terne (LeadAlloy) Coated Cold- Reduced Carbon Steel Sheet of Commercial, Drawing
andStructural Qualities Third Edition
Continuous Hot-DipAluminium/Silicon-Coated Cold- Reduced Carbon Steel Sheet of Commercial andDrawing
Qualities Second Edition
Cold-Reduced Carbon SteelSheet for Vitreous Enamelling Third Edition
Hot-Rolled and Cold-ReducedElectrolytic Zinc-Coated Carbon Steel Sheet of Commercial and
DrawingQualities First Edition
Continuous ElectrolyticTin-Coated Cold-Reduced Carbon Steel Sheet of Commercial and DrawingQualities
Third Edition
Hot-Rolled Steel Sheet ofHigher Yield Strength with Improved Formability Second Edition; (Correctedand
Reprinted - 1994)
Continuously Hot-Rolled SteelSheet of Structural Quality with Improved Atmospheric Corrosion
ResistanceSecond Edition; Corrected and Reprinted 08/01/1999
Cold-Reduced Carbon SteelSheet According to Hardness Requirements Second Edition; Corrected
andReprinted 12-01-1999

Hot-Rolled Steel Strip ofStructural Quality Third Edition

Hot-Rolled Carbon Steel Stripof Commercial and Drawing Qualities Second Edition
Photography - PhotographicMaterials - Determination of ISO Resolving Power Second Edition; Correctedand
Reprinted 09/01/2000
Cold-Reduced Carbon SteelStrip with a Maximum Carbon Content of 0,25% First Edition
Sterile Hypodermic Syringesfor Single Use - Part 1: Syringes for Manual Use First Edition; Replaces ISO7886;
Corrigendum 1-1995
Sterile Single-Use Syringes,with or without Needle, for Insulin First Edition; Amendment 1: 11/01/2000
Information Processing - Textand Office Systems - Standard Generalized Markup Language (SGML)
FirstEdition; Amendment 1: 07-01-1988; Technical Corrigendum 1: 12-15Quality Management Systems -Fundamentals and Vocabulary Second Edition; Supersedes ISO 9000-1:1994
andISO 8402:1994
Quality Management and QualityAssurance Standards - Part 2: Generic Guidelines for the Application of
ISO9001, ISO 9002 and ISO 9003 Second Edition
Quality Management and QualityAssurance Standards - Part 3: Guidelines for the Application of ISO
9001:1994 to the Development, Supply, Installation and Maintenance
Quality Management and QualityAssurance Standards - Part 4: Guide to Dependability Programme
ManagementFirst Edition; IEC/CEI 300-1
Quality Management Systems -Requirements Third Edition; Also Supersedes ISO 9002:1994 and ISO
9003:1994
Quality Management Systems -Guidelines for Performance Improvements Second Edition; Supersedes
ISO9004-1:1994
Quality Management and QualitySystem Elements - Part 2: Guidelines for Services First Edition; Correctedand
Reprinted - 1993
Quality Management and QualitySystem Elements - Part 3: Guidelines for Processed Materials First Edition;
(NZS 9004.3: 1994) (CAN/CSA-ISO 9004-3-94)
Quality Management and QualitySystem Elements - Part 4: Guidelines for Quality Improvement First Edition;
(Corrigendum 1-1994) (NZS 9004.4: 1994) (PNS 1004-4: 1993)
Quality Management -Guidelines for Quality Plans First Edition
Guidelines for AuditingQuality Systems - Part 1: Auditing First Edition; Corrected and Reprinted -1993
Guidelines for AuditingQuality Systems - Part 2: Qualification Criteria for Quality Systems AuditorsFirst
Edition; Corrected and Reprinted - 1993
Guidelines for AuditingQuality Systems - Part 3: Management of Audit Programmes First Edition;Corrected
and Reprinted - 1993
Quality Assurance Requirementsfor Measuring Equipment - Part 1: Metrological Confirmation System
forMeasuring Equipment First Edition; Corrected and Reprinted - 199
Information Technology - 8 mmWide Magnetic Tape Cartridge for Information Interchange - Helical
ScanRecording First Edition
Standard Finishes for ContactFaces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
(Withdrawn) Valves - SocketWelding and Threaded Ends
Standard Marking System forValves, Fittings, Flanges and Unions
Bypass and Drain Connections
Quality Standard for SteelCastings for Valves, Flanges and Fittings and Other Piping Components
VisualMethod for Evaluation of Surface Irregularities

Pipe Hangers and Supports -Materials, Design and Manufacture

Pressure Testing of SteelValves
Butterfly Valves
Pipe Hangers and Supports -Selection and Application
Cast Iron Gate Valves, Flangedand Threaded Ends
Gray Iron Swing Check Valves,Flanged and Threaded Ends
Ball Valves with Flanged orButt-Welding Ends for General Service
Cast Iron Plug Valves, Flangedand Threaded Ends
Bronze Gate, Globe, Angle andCheck Valves
Stainless Steel, Bonnetless,Flanged Knife Gate Valves
Class 3000 Steel Pipe UnionsSocket-Welding and Threaded
Cast Iron Globe & AngleValves Flanged and Threaded Ends
Diaphragm Type Valves
Pipe Hangers and Supports -Fabrication and Installation Practices
Wrought Copper Solder JointPressure Fittings
Ball Valves Threaded,Socket-Welding, Solder Joint, Grooved and Flared Ends
Calibration Laboratories andMeasuring and Test Equipment - General Requirements; (Replaces MIL-STD45662)
Busways
Electric Arc Welding PowerSources R(1999)
Low Voltage Cartridge FusesR(1996)
Enclosed and MiscellaneousDistribution Equipment Switches (600 Volts Maximum)
Panelboards
Residential Controls -Electrical Wall-Mounted Room Thermostats R(1996)
Cross-Linked-Thermosetting-Polyethylene-InsulatedWire and Cable for the Transmission and Distribution of
Electrical EnergyICEA NO. S-66-524; Revision No. 1 - Septem
Energy Management Guide forSelection and Use of Single-Phase Motors R(1997)
Fittings, Cast Metal Boxes,and Conduit Bodies for Conduit and Cable Assemblie Revision No. 1 - August1993
Industrial Control and SystemsGeneral Requirements
Surge Arresters
Industrial LaminatingThermosetting Products
Motors and Generators Revision1:2000
Sheet-Steel Outlet Boxes,Device Boxes, Covers, and Box Supports
Polyvinyl-Chloride (PVC)Externally Coated Galvanized Rigid Steel Conduit and Intermediate MetalConduit
Specialty Transformers (ExceptGeneral-Purpose Type) R(1997)
Transformers Regulators andReactors R(2000)
Metal Cable Tray Systems ThirdEdition; CSA C22.2 No. 126.1-98
General Color Requirements forWiring Devices
Industrial Control and SystemsControllers, Contactors, and Overload Relays Rated Not More Than 2000
VoltsAC or 750 Volts DC
Deadfront DistributionSwitchboards
General Instructions forProper Handling, Installation, Operation, and Maintenance of DeadfrontDistribution
Switchboards Rated 600 Volts or Less

High Voltage Fuses

Electrical Plastic Tubing(EPT) and Conduit (EPC-40 and EPC-80)
Residential Controls -Electrical Wall- Mounted Room Thermostats
Electrical and Electronic PTFE(Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire; Types
ET(250 Volts), E (600 Volts), and EE (1000 Volts) R(1992)
Industrial Control and SystemsFactory Built Assemblies R(2000)
High-Pressure DecorativeLaminates
Application, Fabrication, andInstallation of High- Pressure Decorative Laminates
Power Switching Equipment
PVC Fittings for Use withRigid PVC Conduit and Tubing
Rubber-Insulated Wire andCable for the Transmission and Distribution of Electrical Energy ICEAS-19-81;
Revision No. 1 - February 1994
Electrical and Electronic FEP(Fluorinated Ethylene Propylene) Insulated High Temperature Hook-Up
Wire,Types KT (250 Volt), K (600 Volt), and KK (1000 Volt)
Performance Standard forCategory 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables
Thermoplastic-Insulated Wireand Cable for the Transmission and Distribution of Electrical Energy ICEAS-61402; Revision No. 1 - December 7, 1993; Revision No. 2 - D
Guidelines for PrecautionaryLabeling for Arc-Welding and Cutting Products
PVC Plastic Utilities Duct forUnderground Installations Supersedes TC 6-1990 and TC 8-1990
Wiring Devices - DimensionalSpecifications
Method of Designation forElectric Lamps - Miniature and Sealed Beam Incandescent Lamps FirstEdition:April
1999; Revision of ANSI C78.390-1992
Motion/Position ControlMotors, Controls, and Feedback Devices Revision 1 - September 1996
Ethylene-Propylene-Rubber-InsulatedWire and Cable for the Transmission and Distribution of Electrical
EnergyICEA S-68-516; Revision No. 1 - September 1991; Revision
Fittings for PVC PlasticUtilities Duct for Underground Installation
Energy Management Guide forSelection and Use of Polyphase Motors R(1999)
Requirements for WatthourMeter Sockets R(1999)
Electrical Nonmetallic Tubing(ENT)
Filament-Wound ReinforcedThermosetting Resin Conduit and Fittings R(1997)
(Withdrawn) Dry Cells andBatteries - Specifications Revision of ANSI C18.1-1986; Superseded by
C18.1MPart 1 and Part 2
Dry-Type Transformers forGeneral Applications R(1997)
Steam Turbines for MechanicalDrive Service R(1997)
Binational Wire and CablePackaging Standard EEMAC 201- 2000; Errata 11/17/2000
Insulators - Wet-ProcessPorcelain and Toughened Glass - Suspension Type Supersedes ANSI
C29.2:1992R(1999)
High-Voltage Air DisconnectSwitches Interrupter Switches, Fault Initiating Switches, Grounding Switches,Bus
Supports and Accessories Control Voltage Ranges - Schedu
Switchgear - Unit Substations- Requirements Supersedes ANSI C37.121:1989 R(2000)
High-Temperature andElectronic Insulated Wire - Impulse Dielectric Testing R(1991)

3.0 kHz Insulation ContinuityProof Testing of Wire and Cable R(2000)

Performance Standard forTwisted Pair Premise Voice and Data Communications Cable
Performance Standard forCoaxial Premise Data Communications Cables
9W and 13W Single Ended QuadTube Preheat -Start Fluorescent Lamps with Internal Means of Starting Specifications
9W and 13W Single Ended QuadTube Preheat -Start Fluorescent Lamps with Internal Means of Starting
-Specifications
Electric Lamps - Dimensionaland Electrical Characteristics 15W, 20W and 27W Single-Ended Quad
TubeFluorescent Lamps with Internal Means of Starting with GX32d Bases
Electric Lamps - Dimensionaland Electrical Characteristics 15W, 20W and 27W Single-Ended Quad
TubeFluorescent Lamps with Internal Means of Starting with GX32d Bases
Fluorescent Lamps -Preheat-Start Types - Dimensional and Electrical Characteristics
Fluorescent Lamps -Preheat-Start Types - Dimensional and Electrical Characteristics
Guidelines for theEstablishment of Wattage Ratings on Fluorescent Lamp Data Sheets
Guidelines for theEstablishment of Wattage Ratings on Fluorescent Lamp Data Sheets
Guidelines for theEstablishment of Wattage Ratings on Fluorescent Lamp Data Sheets
Guidelines for theEstablishment of Wattage Ratings on Fluorescent Lamp Data Sheets
Specifications for MercuryLamps Revision of ANSI C78.40-1985; Supplement C78.40a-1998
Electric Lamps: Guidelines forLow Pressure Sodium Lamps Revision of ANSI C78.41-1987
Rigid Steel Conduit - ZincCoated (GRC)
Electrical Lamp Bases
Electrical Lamp Bases
American National Standard forBallasts - for High- Intensity-Discharge and Low-Pressure Sodium
Lamps(Multiple-Supply Type)
(Withdrawn) Zinc-Coated SpoolType Secondary Racks
Enclosures for ElectricalEquipment (1000 Volts Maximum)
Magnet Wire Revision 4
Standard for Aerospace andIndustrial Electrical Cable
Standard for Portable FireExtinguishers (National Fire Codes, vol. 1)
Standard for Low-ExpansionFoam (National Fire Codes, vol. 1)
Standard on Carbon DioxideExtinguishing Systems (National Fire Codes, vol. 1)
Installation of SprinklerSystems (National Fire Codes, vol. 1)

Standard for the Installationof Standpipe, Private Hydrant, and Hose Systems (National Fire Codes, vol. 1)
Standard for Water Spray FixedSystems for Fire Protection (National Fire Codes, vol. 1)
Standard for the Installationof Deluge Foam-Water Sprinkler and Foam-Water Spray Systems (National
FireCodes, vol. 1)
Standard for Dry ChemicalExtinguishing Systems (National Fire Codes, vol. 1)
Standard for Wet ChemicalExtinguishing Systems (National Fire Codes, vol. 1)
Standard for the Installationof Stationary Pumps for Fire Protection (National Fire Codes, vol. 1)
Standard for the Installationof Private Fire Service Mains and Their Appurtenances (National Fire Codes,vol. 1)
Flammable and CombustibleLiquids Code (National Fire Codes, vol. 1)
Code for Motor Fuel DispensingFacilities and Repair Garages (National Fire Codes, vol. 1)
Standard for the Installationof Oil-Burning Equipment (National Fire Codes, vol. 1)
Standard for DrycleaningPlants (National Fire Codes, vol. 1)
Standard for the Installationand Use of Stationary Combustion Engines and Gas Turbines (National FireCodes,
vol. 2)
Standard for Bulk OxygenSystems at Consumer Sites (National Fire Codes, vol. 2)
National Fuel Gas Code AGAZ223.1-1999
Liquefied Petroleum Gas Code(National Fire Codes, vol. 2)
National Electrical Code 1999Edition
Recommended Practice forElectrical Equipment Maintenance (National Fire Codes, Vol. 9)
Electrical Standard forIndustrial Machinery (National Fire Codes, vol. 3)
Standard for Fire Doors andFire Windows (National Fire Codes, vol. 4)
Standard on Incinerators andWaste and Linen Handling Systems and Equipment (National Fire Codes, vol. 4)
Standard for Ovens andFurnaces (National Fire Codes, vol. 4)
Standard for IndustrialFurnaces Using Vacuum as an Atmosphere (National Fire Codes, vol. 4)
Standard for the Installationof Air Conditioning and Ventilating Systems (National Fire Codes, vol. 4)
Standard for the Installationof Warm Air Heating and Air - Conditioning Systems (National Fire Codes, vol.4)
Standard for Exhaust Systemsfor Air Conveying of Vapors, Gases, Mists, and Noncombustible
ParticulateSolids (National Fire Codes, vol. 4)
Ventilation Control and FireProtection of Commercial Cooking Operations (National Fire Codes, vol. 4)
Standard for Health CareFacilities (National Fire Codes, vol. 5)
Life Safety Code (NationalFire Codes, vol. 5)
Standard for Grandstands,Folding and Telescopic Seating, Tents, and Membrane Structures (National
FireCodes, vol. 5)
Standard for Chimneys,Fireplaces, Vents, and Solid Fuel-Burning Appliances (National Fire Codes,vol. 6)
Standard on Water-CoolingTowers (National Fire Codes, vol. 6)
Standard Methods of Fire Testsof Door Assemblies (National Fire Codes, vol. 6)
Standard Method of Test ofSurface Burning Characteristics of Building Materials (National Fire Codes,vol. 6)
Standard Method of Test for DeterminingResistance of Mock-Up Upholstered Furniture Material Assemblies to
Ignitionby Smoldering Cigarettes (National Fire Codes, vol

Guide to Fire HazardProperties of Flammable Liquids, Gases, and Volatile Solids (Formerly NFPA325M)
(National Fire Codes, vol. 10)
Standard for Tank Vehicles forFlammable and Combustible Liquids (National Fire Codes, vol. 6)
Standard for Aircraft FuelServicing (National Fire Codes, vol. 7)
Standard on Aircraft Hangars(National Fire Codes, vol. 7)
Standard for EvaluatingAircraft Rescue and Fire- Fighting Foam Equipment (National Fire Codes, vol.7)
Standard for Aircraft Rescueand Fire-Fighting Vehicles Errata 06/25/1996 (National Fire Codes, vol. 7)
Standard Methods of Fire Testsfor Flame Propagation of Textiles and Films (National Fire Codes, vol. 7)
Standard for the Installationof Lightning Protection Systems
Standard for the Installation,Maintenance, and Use of Emergency Services Communications Systems
(NationalFire Codes, vol. 8)
Standard on Fire DepartmentOccupational Safety and Health Program (National Fire Codes, vol. 8)
Standard for Automotive FireApparatus (National Fire Codes, vol. 8)
Standard for Testing FireDepartment Aerial Devices (National Fire Codes, vol. 8)
Standard on Design of andDesign Verification Tests for Fire Department Ground Ladders (National FireCodes,
vol. 8)
Standard on Fire Hose(National Fire Codes, vol. 8)
Standard for Fire HoseConnections (National Fire Codes, vol. 8)
Hydraulic Fluid Power - Pumps- Determination of Fluid Pressure Fluctuation Characteristics First Edition
Information Report HydraulicFluid Power - Determination of Particulate Contaminant Level Using
AutomaticOptical Particle Counters First Edition
(Withdrawn) Method ofEstablishing the Flow Degradation of Fixed Displacement Hydraulic Fluid
PowerPumps When Exposed to Particulate Contaminant; Appendix R(1994)
Fluid Power Components -Method for Verifying the Fatigue and Establishing the Burst Pressure Ratingsof the
Pressure Containing Envelope of a Metal Fluid Power Compo
Hydraulic Fluid Power -Systems and Products - Method of Measuring Average Steady-State PressureFirst
Edition
Recommended Practice -Hydraulic Fluid Power - Systems and Products - Testing General
Measurement,Principles and Tolerances First Edition
Information Report -Recommendations for Conservation, Maintenance, and Disposal of HydraulicFluids First
Edition
Hydraulic Fluid Power -Systems Standard for Stationary Industrial Machinery Supplement to ISO 4413;1998 Hydraulic Fluid Power - General Rules Relating to Systems
Hydraulic Fluid Power -Two-Port Slip-In Cartridge Valves - Cavities (Technically Equivalent to
ISO7368:1989) First Edition Errata - June 1996
Hydraulic Fluid Power -Contamination Analysis Data - Reporting Method; Appendix (NFPA T2.9.3M
R1)R(1993)
Pneumatic Fluid Power -Systems Standard for Industrial Machinery NFPA/T2.25.1M-1986; First Edition
Safety Requirements forPower-Actuated Fastening Systems
Safety Requirements forDemolition Operations 19536- 0000
Personal Protection -Protective Footwear 19591-0000
(Withdrawn) Soda Fountain andLuncheonette Equipment
Commercial Refrigerators andFreezers

Food Equipment
Special Equipment and/orDevices
Commercial Spray-TypeDishwashing and Glasswashing Machines
Commercial Cooking,Rethermalization, and Powered Hot Food Holding and Transport Equipment
Water Heaters, Hot WaterSupply Boilers, and Heat Recovery Equipment
Dispensing Freezers
Commercial Powered FoodPreparation Equipment
Automatic Ice Making Equipment
Plastics Piping SystemComponents and Related Materials
Manual Food & BeverageDispensing Equipment
Commercial Bulk MilkDispensing Equipment
Pot, Pan, and Utensil Washers
Detergent and Chemical Feedersfor Commercial Spray- Type Dishwashing Machines
Cabinetry and Laboratory Furniturefor Hospitals
High Pressure DecorativeLaminates for Surfacing Food Service Equipment
Dinnerware
Air Curtains for Entrancewaysin Food and Food Service Establishments
Food Equipment Materials
Drinking Water TreatmentChemicals - Health Effects
Drinking Water SystemComponents - Health Effects
Series for Wood Flush Doors
Wood Window Units
Water Repellent PreservativeNon-Pressure Treatment for Millwork
Split Resistance Test Method
Wood Stile and Rail Doors
Adhesive Bond Test Method
Cycle-Slam Test Method
Hinge-Loading Test Method
Door Finishes Test Method
Screwholding Test Method
Photography (Optics) -Photographic Lenses - Measurement Method for Distribution of IlluminancePIMA;
Revision and Redesignation of ANSI PH3.22-1979 (R1992)
Specifications for RubberWelding Hose Eigth Edition (#101 - Nondestructive Testing Handbook, vol. 2)
Classical V-Belts and SheavesThird Edition; Joint RMA/MPTA/RAC (ANSI/IEEE)

Narrow V-Belts and SheavesThird Edition; Joint RMA/MPTA/RAC (ANSI/IEEE)

Resistance Welding EquipmentStandards
Compressive Properties ofOriented Fiber-Resin Composites
Compression After ImpactProperties of Oriented Fiber- Resin Composites
Open-Hole CompressionProperties of Oriented Fiber- Resin Composites
Tensile Properties of OrientedFiber-Resin Composites
Open-Hole Tensile Propertiesof Oriented Fiber-Resin Composites
Determination of Twist inCarbon Fibers
(Withdrawn) MinimumPerformance Criteria for Emergency Steering of Wheeled EarthmovingConstruction
Machines October 1984; Cancelled July 1993, Superseded by J 1511
(R) Automotive and Off-HighwayAir Brake Reservoir Performance and Identification Requirements
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to Straight, Flareless, LightweightFSC
4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to 45 Degree Flareless, LightweightFSC
4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to 90 Degree, Flareless,Lightweight FSC
4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 45 Degree to 45 Degree, Flareless,Lightweight
FSC 4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 45 Degree to 90 Degree, FlarelessLightweight
FSC 4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 90 Degree to 90 Degree, FlarelessLightweight
FSC 4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to Straight, Flared, LightweightFSC
4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to 45 Degree, Flared, LightweightFSC
4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to 90 Degree, Flared, LightweightFSC
4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 45 Degree to 45 Degree, Flared, LightweightFSC
4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 45 Degree to 90 Degree, Flared, LightweightFSC
4720
Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 90 Degree to 90 Degree, Flared, LightweightFSC
4720
(Cancelled) (R) Excavator,Mini-Excavator, and Backhoe Hoe Bucket Volumetric Rating
Exterior Sound Level for HeavyTrucks and Buses R(2001)

Hydraulic Hose FittingsJanuary 2001

Hydraulic Hose
(Cancelled) Grounding ofStorage Batteries *NOT CURRENT DOCUMENT R(1989)
(Cancelled) Sealed LightingUnits for Construction, Industrial, and Forest Machinery R(1994)
Hose Assembly, 3000 psi, PTFE,Flareless, Straight to Straight, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flareless, Straight to 45 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flareless, Straight to 90 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flareless, 45 Degree to 45 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flareless, 45 Degree to 90 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flareless, 90 Degree to 90 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flared, Straight to Straight, Heavyweight FSC 4720
Hose Assembly, 3000 psi,PTFE,Flared, Straight to 45 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flared, Straight to 90 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flared, 45 Degree to 45 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flared, 45 Degree to 90 Degree, Heavyweight FSC 4720
Hose Assembly, 3000 psi, PTFE,Flared, 90 Degree to 90 Degree, Heavyweight FSC 4720
(Cancelled) Truck AbilityPrediction Procedure, Recommended Practice August 1987
(Cancelled) Certificates ofMaximum Net Horsepower for Motor Trucks and Truck Tractors R(1965)
Upper Coupler Kingpin -Commercial Trailers and Semitrailers R(2001)
Coolant System Hoses
(Cancelled) Brake System RoadTest Code - Truck, Bus, and Combination of Vehicles
Fifth Wheel Kingpin,Heavy-Duty - Commercial Trailers and Semitrailers R(2001)
(Cancelled) Brake SystemPerformance Requirements - Truck, Bus, and Combination of Vehicles R(1985)
Formed Tube Ends for HoseConnections and Hose Fittings January 2001
(Withdrawn) Gas Turbine EngineTransient Performance Presentation for Digital Computer Programs
(Cancelled) Brake Performance- Rubber-Tired Earthmoving Machines, Standard Replaced by SAE J/ISO 3450
(Withdrawn) Corrosion ofAluminum Alloys by Aircraft Maintenance Chemicals Sandwich Test
Determination of HydraulicPressure Drop
(Withdrawn) Noise Control inFluid Power Systems of Marine Vehicles (See J 1782); *NOT CURRENT
DOCUMENTR(1992)
Safety Glazing Materials forGlazing Motor Vehicles and Motor Vehicle Equipment Operating on Land
Highways- Safety Standard
(Withdrawn) Specification forStraight Thread O-Ring Boss Port August 1988
Steel Cleanliness, PremiumAircraft-Quality Magnetic Particle Inspection Procedure
Steel Cleanliness, PremiumAircraft-Quality Magnetic Particle Inspection Procedure Metric (SI)Measurement
Phosphate TreatmentAntichafing
Fuel and Oil Hoses FSC 4720

Electron-Beam Welding forFatigue Critical Applications

Packaging and Marking ofPackages of Welding Wire Premium Quality
Oil, Lubricating, LowTemperature for -55 Degrees C (- 67 Degrees F) Service
Fluorocarbon (FKM) RubberHigh-Temperature - Fluid Resistant Low Compression Set 70 to 80
(Withdrawn) Plastic Sheet,Copper Faced, GTN Glass Fabric Reinforced Polytetrafluoroethylene
CancelledOctober 1995
Powder, Fumed Silicon DioxideR(1997)
Aluminum Alloy, Clad Two SidesSheet 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet) Annealed UNS A83003
Aluminum Alloy Die Forgings,and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution
andPrecipitation Heat Treated UNS A 96151
Aluminum Alloy Die Forgings4.0Cu - 2.0Ni - 0.68Mg (2018-T61) Solution and Precipitation Heat Treated
UNSA92018
Aluminum Alloy, Wire 5.0Mg -0.12Mn - 0.12Cr (5056-0) Annealed UNS A95056
(R) Aluminum Alloy, Castings5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation Heat
TreatedUNS A33550
Aluminum Alloy Castings, HighStrength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution
HeatTreated and Overaged
Aluminum Alloy, Rolled orForged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219T352)Solution Heat Treated and Mechanically Stress Relieved UNS A922
Phosphor Bronze Bars, Rods,and Tubing 95Cu - 5Sn Hard Temper UNS C51000
Titanium Alloy Bars, Wire,Forgings, and Rings 6Al - 4V, Extra Low Interstitial Annealed UNS R56401
Titanium Alloy Tubing,Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved UNS R56320
Titanium Alloy, Bars, Wire,Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable UNS R56400
Carbon Steel, Sheet, Strip,and Plate (SAE 1020 and 1025) Annealed UNS G10200 and UNS G10250
Steel, Sheet and Strip 0.08 -0.13C, Aluminum Killed Deep Forming Grade UNS G10100
Steel Bars, Forgings, andTubing 0.15 - 0.20C (SAE 1018) UNS G10180
Iron-Nickel Alloy Strip 49Fe -5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated UNS N09902
Steel, Investment Castings0.95Cr - 0.20Mo (0.25 - 0.35C) (SAE 4130 Mod) Normalized or Normalized
andTempered UNS J13046

Steel, Investment Castings0.95Cr - 0.20Mo (0.35 - 0.45C) (SAE 4140 Mod) Normalized or Normalized
andTempered UNS J14046
Steel, Corrosion Resistant,Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and
SolutionHeat Treated or Homogenization, Solution, and Precipitation
(R) Alloy, Corrosion and HeatResistant, Investment Castings 60Co - 29Cr - 4.5W as Cast UNS R30006
Steel, Corrosion and HeatResistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated,PrecipitationHardenable UNS S17700
Steel, Corrosion and HeatResistant, Seamless and Welded Hydraulic Tubing 19Cr - 9.5Ni - 0.03C Max
ColdDrawn, 1/8 Hard Temper UNS S30403
Steel, Corrosion and HeatResistant, Welded Tubing 25Cr - 20Ni (SAE 30310) Solution Heat Treated
UNSS31008
Nickel Alloy, Corrosion andHeat Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo 3.7CbAnnealed UNS N06625
Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W -18.5Fe
Solution Heat Treated UNS N06002
Steel, Carburizing Grade,Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (SAE 9317)UNS
K44414
Steel Sheet, Strip, and Plate0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) UNS K33517
Steel, Welding Wire 0.95Cr -0.20Mo (0.28 - 0.33C) Vacuum Melted, Environmental Controlled Packaging
SAE4130 UNS K13147
Steel, Welding Wire 0.65Si -1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment
ControlledPackaging UNS K23015
Steel, Welding Wire 0.95Cr -0.20V (0.28 - 0.33C) (SAE 6130) Vacuum Melted, Environment
ControlledPackaging UNS K13148
Rings, Sealing, Fluorocarbon(FKM) Rubber High- Temperature-Fluid Resistant Low Compression Set 85 to 95
Rings, Sealing, Fluorocarbon(FKM) Rubber High- Temperature-Fluid Resistant Low Compression Set 70 to 80
(Withdrawn) Bolts and Screws,Steel Low-Alloy, Heat Resistant 195,000 psi (1,345MPa) Tensile
StrengthHardened and Tempered, Roll Threaded (AMS 6304) *NOT CURRENT DOC
Bolts and Screws, Steel, UNSS66286 1650 Degrees F Solution Heat Treated Precipitation Heat Treated
BeforeRoll Threaded FSC 5306; UNS S66286
(Noncurrent) Depleted UraniumCastings
Aluminum-Beryllium Alloy,Sheet and Plate 38Al - 62Be
(Noncurrent) Sealing Compound,Thread and Gasket, Fuel, Oil, and Water Resistant FSC 8030
(R) Bearings, Ball, Airframe,Antifriction, General Standard for
Nut, Plain, Hexagon FSC 5310; UNSS66286

Nut-Hex, Check

Steel Self-Drilling TappingScrews

Thread Rolling Screws
(R) Sound Measurement -Off-Road Work Machines - Exterior April 1995
Dynamic Cushioning PerformanceCriteria for Snowmobile Seats January 1985 R(1995)
Flashing Warning Lamp forIndustrial Equipment FSC 6240 R(1986)
(R) Personnel Protection forGeneral Purpose Industrial Machines November 1992
Gasket, Metallic-Encased
Seals - Testing of Radial Lip
Decarburization in Hardenedand Tempered Unified Threaded Fasteners
Decarburization in Hardenedand Tempered Metric Threaded Fasteners
Surface Discontinuities onNuts R(1998)
(R) Surface Discontinuities onBolts, Screws, and Studs in Fatigue Applications March 1994
(R) Operator Space EnvelopeDimensions for Off-Road Machines
Load Moment System FSC 3810R(1994)
Swell, Growth, and DimensionalStability of Brake Linings R(1980)
Low Tension Wiring and CableTerminals and Splice Clips January 1974
Radiator Caps and Filler NecksR(1997)
Electrical Charging Systemsfor Construction and Industrial Machinery May 1987
Continuous IdentificationMarking of Nickel and Nickel Base Alloys
Continuous IdentificationMarking of Iron and Steel Products FSC 4710; Should Be Used Instead ofFED-STD183, Which Was Cancelled on February 15, 2000
Engine Oil Performance andEngine Service Classification (Other Than "Energy Conserving")
Identification Marking ofAluminum, Magnesium, and Titanium
(R) Qualifying a Sound DataAcquisition System
Identification Marking ofCopper and Copper Base Alloy Mill Products
Access Systems for Off-RoadMachines June 1988
(R) Windshield Wiper Systems -Trucks, Buses, and Multipurpose Vehicles
Aluminum Alloy, Bar, Rod,Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specificationfor
Aluminum Alloy 3003, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A93003
Aluminum Alloy 2014, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A92014
Aluminum Alloy 2024, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A92024
Aluminum Alloy 5083, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A95083

Aluminum Alloy 5086, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A95086
Aluminum Alloy 5454, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A95454
Aluminum Alloy 5456, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A95456
Aluminum Alloy 6061, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A96061
Aluminum Alloy 6063, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A96063
Aluminum Alloy 6066, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A96066
Aluminum Alloy 7075, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A97075
Aluminum Alloy 7178, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A97178
Aluminum Alloy, Bar, Rod,Shapes, and Wire, Extruded, 7178-T76 Improved Exfoliation Resistance
UNSA97178
Aluminum Alloy Bar, Rod,Shapes, Extruded, 7075-T76 Improved Exfoliation Resistance UNS A97075
Aluminum Alloy, StructuralShapes, Extruded, 6061 UNS A96061
Aluminum Alloy 6162, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A96162
Instrument Face Design andLocation for Construction and Industrial Equipment April 1980 R(1987)
(R) Instrumentation for ImpactTest - Part 1 - Electronic Instrumentation Supersedes J 211-1988
(R) Parking Lamps (FrontPosition Lamps)
Aluminum and Aluminum Alloy,Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished;
GeneralSpecification for
Aluminum Alloy, Bar, Rod, andWire, Rolled, Drawn, or Cold Finished, 1100 UNS A91100
Aluminum Alloy, Bar, Rod, andWire, Rolled, Drawn, or Cold Finished, 3003 UNS A93003
Aluminum Alloy, Bar, Rod, andWire, Rolled, Drawn, or Cold Finished, 2011 UNS A92011
Aluminum Alloy, 2014, Bar,Rod, and Wire and Special Shapes, Rolled, Drawn, or Cold Finished UNS A92014
Aluminum Alloy, 2017, Bar,Rod, and Wire Rolled, Drawn, or Cold Finished UNS A92017
Aluminum Alloy, 2024, Bar,Rod, and Wire; Rolled, Drawn, or Cold Finished UNS A92024
Aluminum Alloy, 5052, Bar,Rod, and Wire; Rolled, Drawn, or Cold Finished UNS A95052

Aluminum Alloy 6061, Bar, Rod,and Wire, and Special Shapes; Rolled, Drawn, or Cold Finished UNS A96061
Aluminum Alloy 7075, Bar, Rod,and Wire, and Special Shapes; Rolled, Drawn, or Cold Finished UNS A97075
Aluminum Alloy 6262, Bar, Rod,and Wire; Rolled, Drawn, or Cold Finished UNS A96262
Nut and Conical Spring WasherAssemblies R(1998)
Spherical and Flanged Sleeve(Compression) Tube Fittings
Aluminum and Aluminum Alloy,Plate and Sheet General Specification for
Aluminum 1100, Plate and SheetUNS A91100
Aluminum Alloy 3003, Plate andSheet UNS A93003
Aluminum Alloy Alclad 2014,Plate and Sheet UNS A82014
Aluminum Alloy 2024, Plate andSheet UNS A92024
Aluminum Alloy Alclad 2024,Plate and Sheet UNS A82024
Aluminum Alloy 5083, Plate andSheet UNS A95083
Aluminum Alloy 5086, Plate andSheet UNS A95086
Aluminum Alloy 5052, Plate andSheet UNS A95052
Aluminum Alloy 5456, Plate andSheet UNS A95456
Aluminum Alloy 5454, Plate andSheet UNS A95454
Aluminum Alloy 6061, Plate andSheet UNS A96061
Aluminum Alloy 7075, Plate andSheet UNS A97075
Aluminum Alloy Alclad 7075,Plate and Sheet UNS A87075
Aluminum Alloy 7178, Plate andSheet UNS A97178
Aluminum Alloy Alclad 7178,Plate and Sheet UNS A87178
Aluminum Alloy, Alclad OneSide 7075, Plate and Sheet UNS A87075
Aluminum Alloy 5086, Plate andSheet for Sea Water Applications

Aluminum Alloy 5456, Plate andSheet, for Sea Water Applications

Aluminum Alloy, 7178-T76,Plate and Sheet Improved Exfoliation Resistant UNS A97178
Aluminum Alloy, 7178-T76,Alclad Plate and Sheet, Improved Exfoliation Resistant UNS A87178
Aluminum Alloy, 7075, Plateand Sheet (Improved Exfoliation Resistant)
Aluminum Alloy, Alclad 7075Plate and Sheet Improved Exfoliation Resistant UNS A87075
Aluminum Alloy, 7011 Alclad,7075 Plate and Sheet UNS A87075
Aluminum Alloy, 7011 Alclad,7178 Plate and Sheet UNS A87178
Aluminum Alloy 2124, Plate UNSA92124
Aluminum Alloy 2219, Plate andSheet UNS A92219
(R) Wheels/Rims - Trucks -Performance Requirements and Test Procedures
Identification of Material forAN, MS, and AS Engine and Propeller Standard Utility Parts and Also
forCompany Parts
(R) Steering Frame Lock forArticulated Loaders and Tractors November 1992
Nickel Plating(Electrodeposited) FSC MFFP; Should be used instead of QQ-N-290, which wascancelled 3 May
2001
(R) Vehicle Grade ParkingPerformance Requirements September 1995
Operator Controls onIndustrial Equipment April 1980 R(1994)
Engine Oil ViscosityClassification FSC 9150
(R) Automotive Air Brake LineCouplers (Gladhands)
Chromium Plating(Electrodeposited) FSC MFFP; Should be used instead of QQ-C-320, which wascancelled on
3 May 2001
(R) Tire Guards for OperatorProtection - Earthmoving Haulage Machines
(R) Multiposition Small EngineExhaust System Fire Ignition Suppression June 1995
Sound Level for Truck CabInterior October 1988
(R) Wheel Chocks June 1990
Spark Arrester Test Procedurefor Medium Size Engines January 1991
(R) Welded Flash-ControlledLow-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading
(R) Truck and Bus GradeParking Performance Test Procedure September 1995
Aluminum Alloy Forgings
Flammability of PolymericInterior Materials - Horizontal Test Method June 1989 R(1994)
Radius-Of-Load or Boom AngleIndicating Systems April 1985 R(1994)
Load Indicating Devices inLifting Crane Service April 1985
Gogan Hardness of Brake LiningMay 1972 R(1996)

Specific Gravity of BrakeLining August 1971 R(1993)

(R) Windshield DefrostingSystems Test Procedure and Performance Requirements - Trucks, Buses,
andMultipurpose Vehicles
(R) Windshield DefrostingSystems Performance Requirements - Trucks, Buses, and Multipurpose VehiclesJune
1994
(R) Operator Restraint Systemfor Off-Road Work Machines
Sandwich Constructions andCore Materials; General Test Methods FSC 5680; Should Be Used Instead of MILSTD-401B, Which Was Cancelled on 24 September 1999
Chemical Compositions of SAECarbon Steels
Chemical Compositions of SAEAlloy Steels
Methods of Measuring CaseDepth R(1998)
Wire, Steel, Carbon (HighCarbon, Round, for Mechanical Springs, General Purpose) FSC 9505
Mechanical and MaterialRequirements for Externally Threaded Fasteners
Sintered Carbide ToolsFebruary 1977
(R) Cut Wire Shot June 1993
Identification Marking Methods
Electrohydraulic Servovalves
Aircraft Engine Fuel PumpCavitation Endurance Test
Rivets and Riveting, StandardMay 1968
Sleeve Type Half BearingsNovember 1978 R(1995)
Automotive Tube Fittings
Refrigeration Tube Fittings -General Specifications
Hydraulic Tube Fittings
Hydraulic Flanged Tube, Pipe,and Hose Connections, Four-Bolt Split Flange Type June 1993
(R) Seamless Low-Carbon SteelTubing Annealed for Bending and Flaring February 1996
(R) Welded and Cold DrawnLow-Carbon Steel Tubing Annealed for Bending and Flaring
Welded Low-Carbon Steel TubingFSC 4710
Automotive Pipe Fittings May1995
Automotive Pipe, Filler, andDrain Plugs May 1995
(R) Automotive Straight ThreadFiller and Drain Plugs June 1993
Lubrication Fittings
(R) Storage Batteries
(R) Voltage Drop for StartingMotor Circuits October 1996
Circuit Breakers April 1996
(R) Seven Conductor ElectricalConnector for Truck- Trailer Jumper Cable
(R) Electrical Terminals -Eyelet and Spade Type June 1993
Headlamp Beam Switching March1990
Semiautomatic Headlamp BeamSwitching Devices June 1989
Aerospace Size Standard forO-Rings
(R) Miniature Lamp Bulbs

(R) Test Methods and Equipmentfor Lighting Devices and Components for Use on Vehicles Less Than 2032
mm inOverall Width
(R) Plastic Materials for Usein Optical Parts Such as Lenses and Reflex Reflectors of Motor VehicleLighting
Devices
(R) Color Specification June1995
(R) Front Fog Lamps June 1993
Coiled Tubing, CorrosionResistant Steel, Hydraulic Applications, Aerospace
(R) Tail Lamps (Rear PositionLamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width
Stop Lamps for Use on MotorVehicles Less Than 2032 mm in Overall Width
Turn Signal Lamps for Use onMotor Vehicles Less Than 2032 mm in Overall Width
Turn Signal Switch October1977
(R) Sidemarker Lamps for useon Road Vehicles Less than 2032 mm in Overall Width
Backup Lamps (Reversing Lamps)
Reflex Reflectors July 1995
Flashing Warning Lamps forAuthorized Emergency, Maintenance and Service Vehicles
Determination of ParticulateContamination in Liquids by the Particle Count Method R(1991)
Impulse Testing of HydraulicHose, Tubing, and Fitting Assemblies R(1991)
Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees F,Heavyweight, Hydraulic
(R) Hose Assembly and Tubing,Polytetrafluoroethylene, Cleaning Methods for
Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 Degrees F, HeavyDuty, Hydraulic
and Pneumatic
Engine and TransmissionDipstick Marking August 1977 R(1995)
V-Belts and Pulleys R(1997)
Motor Vehicle Heater TestProcedure R(1998)
Automotive TransmissionTerminology R(1997)
(R) Brake Lining Quality TestProcedure
(R) Rivets for Brake Liningsand Bolts for Brake Blocks July 1994
Speedometers and Tachometers -Automotive, Recommended Practice June 1984 R(1988)
Location and Operation ofInstruments and Controls in Motor Truck Cabs, Recommended Practice June
1982R(1988)
Gas Turbine Engine Steady-State and Transient Performance Presentation for Digital Computer Programs
Rear Wheel Splash and StoneThrow Protection, Recommended Practice January 1956 R(1984)
Installation Procedures andTorques for Fluid Connections R(1991)
Tire Chain Clearance- Trucks,Buses (Except Suburban, Intercity, and Transit Buses), and Combinations
ofVehicles, Information Report August 1985
Trailer Couplings, Hitches,and Safety Chains - Automotive Type
Piloted Ring Seal Tube SwivelConnection Assembly R(1991)
(R) Curbstone Clearance,Approach, Departure, and Ramp Breakover Angles - Passenger Car and LightTruck,
Recommended Practice June 1996
Disc Wheel/Hub or DrumInterface Dimensions - Commercial Vehicles

Turning Ability and OffTracking - Motor Vehicles R(1998)

Safety Chain of Full Trailersor Converter Dollies, Recommended Practice May 1988
Steel, Sheet and Strip, Mediumand High Carbon FSC 9515
Truck Tractor SemitrailerInterchange Coupling Dimensions, Information Report August 1984
Brake and ElectricalConnection Locations - Truck- Tractor and Truck-Trailer, Recommended PracticeMay
1985
Openings for Six- andEight-Bolt Truck Transmission Mounted Power Take-Offs R(2000)
Rating of Winches
Industrial and AgriculturalDisc Wheels R(1999)
(R) Air Cleaner Test Code June1993
Nomenclature-Crawler Tractor,Standard; January 1954 R(1986)
(R) Specification Definitions- Loaders
Cutting Edge - Curved Grader,Standard June 1991
Countersunk Square Holes forCutting Edges and End Bits, Standard July 1986
(R) Capacity Rating-Scraper,Open Bowl
Procedure for theDetermination of Particulate Contamination of Air in Dust Controlled Spacesby the Manual
Particle Count Method
Hydraulic Pump and MotorMounting and Drive Dimensions, Standard June 1996
Maintenance Interval Chart,Recommended Practice May 1991
Lubricant Types - Constructionand Industrial Machinery, Information Report January 1972
Aircraft Propulsion SystemPerformance Station Designation and Nomenclature
Lighting Identification Code,Recommended Practice January 1995
Corrosion-Resistant SteelParts: Sampling, Inspection and Testing for Surface Passivation Should BeUsed
Instead of MIL-STD-753, Which Was Cancelled on December 18, 1
(R) Dimensional Specificationsfor General Service Sealed Lighting Units
Steel Bars, Wire, Shapes, andForgings; Corrosion Resistant Should Be Used Instead of QQ-S-763F, Which
WasCancelled on October 5, 1998
Accumulators, Ground,Hydropneumatic Pressure
Crane Load Stability Test CodeOctober 1990
Clamp, Half Tube SupportR(1991)
(R) Aerospace - Procedure forthe Determination of Particulate Contamination in Hydraulic Fluids by
theControl Filter Gravimetric Procedure
(R) Hose Characteristics andSelection Chart Should Be Used Instead of MS33620 Which Was Cancelled on
7July 1999
Rated Operating Load for Loaders,Standard May 1987
Crane Hoist Line Speed andPower Test Code R(1998)
Electrical Wiring Systems forConstruction, Agricultural, and Off-Road Machines May 1985 R(1994)
Human Physical Dimensions,Recommended Practice May 1989
Test Procedures for Brake Shoeand Lining Bonds
Brake System Road Test Code -Passenger Car and Light- Duty Truck R(1997)
Nonmetallic Air Brake SystemTubing
(R) Optical Warning Devicesfor Authorized Emergency, Maintenance, and Service Vehicles

Coding Systems forIdentification of Fluid Conductors and Connectors, Recommended PracticeDecember 1993
Trailer Tow Bar Eye and PintleHook/ Coupler Performance, Recommended Practice November 1987
Connection and AccessoryLocations for Towing Multiple Trailers, Recommended Practice November 1985
Electrical Terminals BladeType, Recommended Practice August 1969
Method - Pressure Drop Testsfor Fuel System Components
Wrenching Configuration,Bi-Hexagonal (12 Point) Drive, Design Standard for
Manufacturing and InspectionStandards for Preformed Packings (O-Rings) R(1991)
Drawbar Test Procedure forConstruction, Forestry, and Industrial Machines, Standard May 1986
(R) Trailer Axle Alignment
Determination of AluminumAlloy Tempers Through Electrical Conductivity Measurement (Eddy
Current)R(1988)
Fitting, Nipple, Reducer,Flareless Tube to Pipe, External Thread
Fitting, Elbow, 90 Degree,Standard and Reducer, Flareless Tube to Pipe, External Thread
Control Locations for Off-RoadWork Machines R(1994)
Operator's Seat Dimensions forOff-Road Self-Propelled Work Machines, Standard December 1988
(R) Passenger Car WindshieldWiper Systems
Torque Requirements,Installation and Qualification Test, Hose and Tube Fitting R(1993)
Hazard Warning Signal Switch,Standard October 1988
Marine Push-Pull ControlCables August 1965 R(1980)
(R) Sound Measurement -Off-Road Work Machines - Operator - Singular Type, Standard April 1995
Minimum Service AccessDimensions for Off-Road Machines December 1987 R(1993)
Electrical Terminals - Pin andReceptacle Type, Standard July 1989
Hydraulic Power CircuitFiltration July 1965 R(1986)
(R) Fitting, Adapter, Union,Flared to Boss Should be Used Instead of MS24487C, Which was Cancelled on
1March 2000
(R) Passenger Car WindshieldWasher Systems
Guns, Spray, Oil and Solvent
Wrenches, Hand Twelve PointHigh Strength, Thin Wall R(1999)
Drive - Studded, Accessory,2.653 B.C. Square, Design Standard for
Lifting Crane, Wire-RopeStrength Factors May 1991
(R) Recommended Practice forMeasuring Haze and Reflectance of Mirrors
Drive-Accessory, (203.2) 8.000BC Round, QAD, Design Standard for
Drive-Accessory, (254) 10.000BC Round, QAD, Design Standard for
Spline Details, AccessoryDrives and Flanges
Coupling-Clamp, Groove V-Band,6.400, 9.400, 11.400 Flange OD R(1991)
Coupling-Clamp, Groove V-Band, Forged 6.400, 9.400, 11.400 Flange OD R(1991)
Minimizing Stress- CorrosionCracking in Wrought Titanium Alloy Products
(R) Vision FactorsConsiderations in Rearview Mirror Design, Information Report June 1995

Sound Level for Passenger Carsand Light Trucks

Rope Supported Lattice-TypeBoom Crane Structures - Method of Test April 1985 R(1994)
Recommended Practice for theDesign of Tubing Installations for Aerospace Fluid Power Systems R(1991)
(R) Alarm - Backup - ElectricLaboratory Performance Testing, Standard August 1993
(R) Mechanical and MaterialRequirements for Steel Nuts
Tee, Standard and Reducer,Bulkhead on Run, Internal Port on Side, Flareless Tube FSC 4730 R(2000)
Tee, Standard and Reducer,Bulkhead and Internal Port on Run, Flareless Tube FSC 4730 R(2000)
Tee, Standard and Reducer,Bulkhead on Run, Flareless Tube FSC 4730 R(2000)
Elbow, 90 Degree, Standard andReducer, Flareless Tube FSC 4730 R(2000)
Tee, Standard and Reducer,Flareless Tube FSC 4730 R(2000)
Cross, Standard and Reducer,Flareless Tube FSC 4730 R(2000)
Union, Standard and Reducer,Bulkhead, Flareless Tube FSC 4730 R(2000)
Elbow, 90 Degree, Standard andReducer, Bulkhead, Flareless Tube FSC 4730 R(2000)
Tee, Standard and Reducer,Bulkhead on Side, Flareless Tube FSC 4730 R(2000)
Elbow, 45 Degree, Standard andReducer, Flareless Tube R(2000)
Fuel-Fired Heaters - AirHeating - for Construction and Industrial Machinery, Standard December 1989
(R) Lighting and Marking ofConstruction, Earthmoving Machinery
(R) Fitting, Tee, Standard andReducer , Bulkhead on Run, Internal Port on Side, Flared FSC 4730
(R) Fitting, Tee, Standard andReducer, Bulkhead on Run, Internal Port on Run, Flared FSC 4730
(R) Fitting, Tee, Standard andReducer, Bulkhead on Run, Flared FSC 4730
(R) Fitting, Elbow, 90 Degree,Standard and Reducer, Flared FSC 4730
Tee, Standard and Reducer,Flared Tube
(R) Fitting, Cross, Standardand Reducer, Flared FSC 4730
(R) Fitting, Union, Standardand Reducer, Bulkhead, Flared FSC 4730
(R) Fitting, Elbow, 90 Degree,Standard and Reducer, Bulkhead, Flared FSC 4730

(R) Fitting, Tee, Standard andReducer, Bulkhead on Side, Flared FSC 4730
(R) Fitting, Elbow, 45 Degree,Standard and Reducer, Bulkhead, Flared FSC 4730
Performance Criteria forRollover Protective Structures (ROPS) for Construction, Earthmoving, Forestryand
Mining Machines April 1988 R(1994)
Safety Wire Holes, Hex,Fitting, Location of, Design Standard FSC 4720 R(2000)
(R) Describing and Measuringthe Driver's Field of View, Recommended Practice August 1994
(R) Steel Stamped Nuts of OnePitch Thread Design - Inch Series, Standard August 1996
Fire Testing of Flexible Hose,Tube Assemblies, Coils, Fittings, and Similar System Components
(R) Cantilevered Boom CraneStructures - Method of Test, Standard November 1993
Pressure Ratings for HydraulicTubing and Fittings, Information Report July 1995
(R) Seven-Conductor Cable
Sleeve, Hose Assembly, FireProtection
Sintered Tool Materials,Recommended Practice February 1977
Sleeve Hose Assembly, HeatShrinkable R(2000)
Engine Sound Level MeasurementProcedure R(2000)
Fuel Economy Measurement RoadTest Procedure, Standard June 1995
Numbering Metals and Alloys,Recommended Practice July 1995 (ASTM E 527)
Hydraulic Excavator LiftCapacity Calculation and Test Procedure, Standard November 1988
Low Tension Primary Cable
Bolts, Screws and Nuts -External Wrenching UNJ Thread, Inch Series - Design Standard FSC 53GP
Determining Seat Index PointR(1997)
Reporting Cleanliness Levelsof Hydraulic Fluids, Recommended Practice July 1979 R(1986)
Sound Measurement - Off-RoadSelf-Propelled Work Machines Operator-Work Cycle
Test Procedure to Measure theR.F. Shielding Characteristics of E.M.I. Gaskets R(1991)
Operator Ear Sound LevelMeasurement Procedure for Small Engine Powered Equipment,
RecommendedPractice October 1977 R(1985)
Nondestructive InspectionStandards for Bolts and Screws
Hydraulic Excavator OperatorControls, Recommended Practice April 1978 R(1988)
Aircraft Gas Turbine EngineExhaust Smoke Measurement
Telescopic Boom Length IndicatingSystem R(1980)
Standard Machining AllowanceAircraft-Quality and Premium Aircraft-Quality Steel Bars and
MechanicalTubing
Flexure Testing of HydraulicTubing Joints and Fittings

Nomenclature and Dimensionsfor Hydraulic Excavators, Recommended Practice March 1981 R(1984)
(R) Selection, Application,and Inspection of Electric Overcurrent Protective Devices
High-Temperature Low PressureHose Assembly, Convoluted-, Tetrafluoroethylene-, for Aerospace R(1992)
Standard Impulse MachineEquipment and Operation R(1991)
Specification Definitions -Off-Road Work Machines, Standard January 1985
(R) Metric Thread RollingScrews
(R) Fire Resistant PhosphateEster Hydraulic Fluid for Aircraft
General Requirements forAerospace Ground Support Equipment Motorized and Nonmotorized
Procedure for the ContinuousSampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
Graphic Symbols for AircraftHydraulic and Pneumatic Systems R(1991)
Sleeve, Hose Assembly, ChafeGuard, TFE or FEP R(1991)
Sleeve, Hose Assembly, ChafeGuard, Butyrate Coil R(1993)
Automobile, Truck,Truck-Tractor, Trailer, and Motor Coach Wiring, Recommended Practice October1981
Sleeve, Hose Assembly, ChafeGuard, TFE Coil R(1993)
Sleeve, Hose Assembly, ChafeGuard, Nylon Coil R(1993)
Sleeve, Hose Assembly, ChafeGuard, Neoprene Rubber R(2000)
Sleeve, Heavy Wall, HoseAssembly, Chafe Guard, TFE R(2000)
Adapter - Port Connection RingLocked to Flareless Tube End R(1993)
Port - Ring Locked FluidConnection Type Standard Dimensions for FSC 4730 R(2000)
Adapters - Port Connection,Ring Locked Design, Installation and Removal of
Fastener Torque for ThreadedApplications, Definitions of
Chemical Milling Process
Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees F,Lightweight, Hydraulic
and Pneumatic
Engine Power Test Code - SparkIgnition and Compression Ignition - Net Power Rating June 1990 R(1995)
(R) Manufacturers'Identification of Aerospace Electrical and Electronic Wiring Devices andAccessories
Aerospace Hydraulic FluidsPhysical Properties
(R) Graphical Symbols forOperator Controls and Displays on Off-Road Self-Propelled Work Machines
Alternate Dimensions, CenterBody Section, Shape Fluid Fitting, Design Standard FSC 4730 R(2000)

Fire Test Equipment forFlexible Hose and Tube Assemblies R(2000)

Compound, Alkaline RustRemover Aircraft Turbine Engine Components R(1996)
Scale Conditioner, AlkalineAircraft Turbine Engine Components
Oxide Remover Compound, AcidicAircraft Turbine Engine Components R(1995)
Oxide Conditioner, AlkalinePermanganate Aircraft Turbine Engine Components R(1999)
Impulse Testing of AerospaceHydraulic Actuators, Valves, Pressure Containers, and Similar Fluid
SystemComponents
(R) Performance Requirementsfor Motor Vehicle Headlamps
Acid, Inhibited PhosphoricAircraft Turbine Engine Components Room Temperature Application R(1996)
Compound, Hot Carbon and PaintRemover Aircraft Turbine Engine Components
Compound, Silicone RubberRemover Aircraft Turbine Engine Components Room Temperature
ApplicationR(1996)
Remover, Anti-Galling CompoundAircraft Turbine Engine Components Room Temperature Application
R(1996)
(R) Road Vehicle- HydraulicBrake Hose Assemblies for Use with Nonpetroleum-Base Hydraulic Fluids
Automotive Air Brake Hose andHose Assemblies, Recommended Practice June 1985 (NZS/SAE J1402: 1985)
InletTotal-Pressure-Distortion Considerations for Gas- Turbine Engines
Gas Turbine Engine Inlet FlowDistortion Guidelines
(R) Deicing/Anti-Icing Fluid,Aircraft, SAE Type I
Fluid, Deicing/Anti-Icing,Runways and Taxiways Glycol Base
(R) Fluid, AircraftDeicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV
(R) Compound, Solid Runway andTaxiway Deicing/Anti- Icing
Fluid, Generic,Deicing/Anti-Icing Runways and Taxiways
Disinfectant Cleaner forAircraft Interior General Purpose Liquid
Fitting - O-Ring Face Seal FSC4730; This Document is Technically Equivalent to ISO/DIS 8434 Part 3
(R) Braking Performance -Roller Compactors
Deodorant, Aircraft Toilet

Test Procedure for BatteryFlame Retardant Venting Systems R(1998)

(R) Performance Test forAir-Conditioned, Heated, and Ventilated Off-Road, Self-Propelled WorkMachines
Hose Clamp Specifications
Areas for Calculating Stressor Load Values for Metric MJ Externally Threaded Fasteners R(1991)
Surface Preparation andPriming of Aluminum Alloy Parts for High Durability Structural AdhesiveBonding
R(1995)
Cleaner for Aircraft ExteriorSurfaces, Water- Miscible, Pressure-Spraying Type R(1994)
Cleaner, Aircraft Glass Window
Cleaner, Transparent PlasticR(1996)
Cleaner, Alkaline Hot-TankType
Deoxidizer, Acidic, forMagnesium Alloys R(1996)
Instrumental Color DifferenceMeasurement for Exterior Finishes, Textiles and Colored Trim,
RecommendedPractice June 1986
Cleaner, Anodic, Electrolytic,Alkaline for Steel, Tank Type R(1992)
Wrenches, Twelve Spline,Metric R(1991)
Measurement of Solar HeatingEffect July 1995
Inserts, Screw Thread, HelicalCoil Metric Series Procurement Specification for FSC5340
Gaging Practice and GageRequirements for MJ Metric Screw Threads
Insert, Screw Thread, HelicalCoil Metric Series, Standard Assembly Dimensions for
Nut, Self Locking - UNSS66286, 425 Degrees C &650 Degrees C, 1100 MPa, MJ Thread,
ProcurementSpecification for, Metric R(1991)
Nut, Self-Locking - Steel,Class 1100 MPa/235 Degrees C, MJ Thread Procurement Specification for,
MetricFSC 5310 R(2000)
Surface Preparation andPriming of Aluminum Alloy Parts for High Durability Structural Adhesive
BondingHand Applied Phosphoric Acid Anodizing
Desmutter, Aluminum, PowderedR(1994)
Desmutter, Aluminum, LiquidR(1994)
Cleaner, Carpet WaterExtraction Type
Hose Assemblies, Installed,Visual Inspection Guide for

Structural Weldbonding ofAluminum Structures R(1995)

Motor Vehicle Brake Fluid
Fitting End, Internal FlareDesign Standard FSC 4730 R(2000)
Coupling, Flexible, VariableCavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions Design Standard
Coupling Subassembly,Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends
Half Coupling Subassembly,Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends
Nut Assembly, Coupling,Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends
Washer, Coupling, Flexible,Variable Cavity, Threaded, Ferrule Type Tube Ends
Ferrule, Coupling, Flexible,Variable Cavity, Threaded, Ferrule Tube End
Retainer, Coupling, Flexible,Variable Cavity, Threaded Ferrule Type Tube Ends
Coupling Body, Flexible,Variable Cavity, Threaded Ferrule Type Tube Ends
Fitting End, Half- Coupling,Flexible Variable Cavity Threaded, Ferrule Type Design Standard
Ferrule End, Coupling,Flexible Variable Cavity, Threaded, Ferrule Type, Design Standard
Hole Sizes, Recommended forMetric Fasteners on Propulsion Equipment R(1991)
Bleed-Air Pneumatic Systemsfor Gas Turbine Equipped Marine and Amphibious Craft, Information
Report;November 1984 R(1991)
(R) Design and SpecificationGuide for Hydraulic Pumps Used on Advanced Surface Craft and
SubmersibleVehicles, Information Report August 1989
(R) General EnvironmentalConsiderations for Marine Vehicles, Information Report December 1990
Hydraulic System Diagrams andAssociated Tables for Marine Vehicles April 1991
Materials for Fluid Systems ofMarine Vehicles December 1982 R(1987)
(R) Ship Systems and Equipment- Hydraulic Systems - Noise Control Supersedes J 1782/HIR 1622A-1986
(R1992)
Selection of HydraulicDirectional Control Valves for Marine Vehicle Applications
Specifications and Standardsfor Marine Hydraulic Systems and Components May 1992
Spacers and Washers,Procurement Specification for, Metric R(1991)

Nut, Fitting, Retained,Lightweight

Wire, Retainer Tube CouplingNut
Nut, Fitting, Lightweight,Flareless FSC 4730
Exterior Sound Level ofSpecialized Aircraft Ground Support Equipment, Measurement of R(1991)
Spring Clips and CushionSelection for Metal Tube Support, Metric
Terminology for TitaniumMicrostructures R(1994)
Chord Method of EvaluatingSurface Microstructural Characteristics
(R) Coupling Assembly,V-Retainer, High Pressure High Temperature, Pneumatic Tube
Coupling, V-Retainer, SingleLatch, Type I Standard Profile
Flange, Male, Seam Weld Type IStandard Profile
Flange, Female, Seam Weld,Type I Standard Profile
Coupling, V-Retainer, SingleLatch, Type II Low Profile
Flange, Male, Seam Weld, TypeII Low Profile
Flange, Female, Seam Weld,Type II Low Profile
Seal, Type I & II Standardand Low Profile
Flange, Male, Butt Weld, TypeII Low Profile
Flange, Female, Butt Weld,Type II Low Profile
Flange, Male, Butt Weld, TypeI Standard Profile
Flange, Female, Butt Weld,Type I Standard Profile
Flange End, Male, Type IStandard Profile Design Standard
Flange End, Female, Type IStandard Profile Design Standard
Flange End, Male, Type II LowProfile Design Standard

Flange End, Female, Type IILow Profile Design Standard

Flange, Male, Integral, WeldRing, Type II Low Profile
Flange, Female, Integral, WeldRing, Type II Low Profile
Flange, Male, Integral, WeldRing, Type I Standard Profile
Flange, Female, Integral, WeldRing, Type I Standard Profile
Coupling, V-Retainer, DoubleLatch, Type II Low Profile
Installation, Joint,V-Retainer Coupling Assembly
Coupling, V-Retainer, DoubleLatch, Type I Standard Profile
Lubricating Oil, AircraftPiston Engine (Ashless Dispersant)
Bolt, Tee Head, InterfaceSurface, Dimensions for R(1991)
Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal,
Straight to Straight
Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal,
Straight to 45 Degree
Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal,
Straight to 90 Degree
Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi, Lightweight,Beam Seal,
45 Degree to 45 Degree
Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal,
45 Degree to 90 Degree
Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal,
90 Degree to 90 Degree
Qualification andCertification of Etch Inspectors R(1991)
(R) Connections for GeneralUse and Fluid Power - Ports and Stud Ends with ISO 725 Threads and ORingSealing - Part 1: Threaded Port with O-Ring Seal in Truncated Ho
Connections for General Useand Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring
Sealing- Part 2: Heavy-Duty (S Series) Stud Ends ISO 11926-3
(R) Connections for GeneralUse and Fluid Power - Ports and Stud Ends with ISO 725 Threads and ORingSealing - Part 3: Light-Duty (L Series) Stud Ends, Standard; Mar
Application of Direct Pressureto Resin in Curing of Epoxy and Addition Type Polyimides R(1995)
(R) Age Controls for HoseContaining Age-Sensitive Elastomeric Material
Nut, Hex, Free Running,Procurement Specification for, Metric R(1991)

Nuts, Self-Locking, UNS N07001730 Degrees C, 1100 MPa, and 1210 MPa Procurement Specification for,
Metric
(R) Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, up to 1500 psi and 450 DegreesF, Hydraulic
and Pneumatic
Hose Assembly, Polytetrafluoroethylene,Metallic Reinforced, up to 1500 psi and 450 Degrees F, Hydraulic
andPneumatic (Supplement 1) Supplement 1 to AS 1946A-2000
Dendrite Arm Spacing ofStructural Aircraft Quality D357 Aluminum Alloy Castings, Determination
andAcceptance of R(1996)
Coupling Assembly, V-Band,Sheet Metal Flange, Pneumatic Tube R(1991)
Coupling, Sheet Metal, 40Degree V-Band, Standard Latch FSC 5340
Coupling, Sheet Metal, 40Degree V-Band, Quick Release (Optional Safety) Latch R(1991)
Flange, Sheet Metal R(1991)
Flange End, Design StandardR(1991)
Installation, Joint, 40 DegreeV-Band Coupling and Narrow Sheet Metal Flanges
Lubricating Oil, AircraftPiston Engine (Non- dispersant Mineral Oil)
Containers, Shipping andStorage, Reusable
Recommended MeasurementPractices and Procedures for EMC Testing
Fitting Assembly, Adapter RingLocked Port Connection to Beam Seal 4000 psi and 5000 psi /9/ FSC
4730R(2000)
Aluminum Alloy Tempers
Hose Assembly,Tetrafluoroethylene, Lightweight, 204 Degrees C, 21 000 kPa Hydraulic, MetricR(1991)
Packing, Preformed - O-RingSeal Standard Sizes &Size Codes, Metric R(1991)
(R) Port, Internal, StraightThread, Fitting Connection, Design Standard, Metric FSC 4730
(R) Pneumatic Tires forMilitary Tactical Wheeled Vehicles,
Union, Flareless Tube, MetricFSC 4730 R(2000)
Plug, Flareless Tube, MetricFSC 4730 R(2000)
Cap Assembly, Pressure Seal,Flareless Tube, Metric FSC 4730 R(2000)
Bushing, Screw ThreadExpander, Flareless Tube, Metric FSC 4730 R(2000)
Union, Reducer, FlarelessTube, Metric FSC 4730 R(2000)

Plug, Port - MJ Thread, O-RingSeal, AMS-5640, Metric

Nut, Flareless, Metric
Union, Bulkhead, FlarelessTube, Metric FSC 4730 R(2000)
Adapter Flareless Metric toInch FSC 4730 R(2000)
Nut, Retained, Flareless,Metric FSC 4730
Union, Reducer/ExpanderBulkhead, Flareless Tube, Metric FSC 4730 R(2000)
Test Methods, Hose Assemblies,Polytetrafluoroethylene (PTFE) FSC 4720
Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DEGCone, Straight
to Straight, Lightweight, Metric R(1994)
Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, Straight to
45-Deg, Lightweight, Metric R(1994)
Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, Straight to
90-Deg, Lightweight, Metric R(1994)
Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, 45- Deg to
45-Deg, Lightweight, Metric R(1994)
Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, 45- Deg to
90-Deg, Lightweight, Metric R(1994)
Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, to 90-Deg
to 90-Deg, Lightweight, Metric R(1994)
Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, Straight to Straight, MetricR(1991)
Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, Straight to 45 Deg, Metric R(1991)
Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, Straight to 90 Deg, Metric R(1991)
Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, 45 Deg to 45 Deg, Metric R(1991)
Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, 45 Deg to 90 Deg, Metric R(1991)
Hose Assembly, Tetrafluoroethylene,21000 kPa, Flareless, 90 Deg to 90 Deg, Metric R(1991)
Fitting End, Dimensions, FluidSystems Port Connection, Metric R(1993)
Hose Assemblies, Metal MediumPressure, High Temperature, Metric R(1994)
Hose Assembly, Metal, MediumPressure Flareless, Welded, Straight to Straight Fitting Ends, Metric R(1994)
Hose Assembly, Metal, MediumPressure Flareless, Welded, Straight to 45 Degree Fitting Ends, MetricR(1994)
Hose Assembly, Metal, MediumPressure Flareless, Welded, Straight to 90 Degree Fitting Ends, MetricR(1994)
Hose Assembly, Metal, MediumPressure Flareless, Welded, 45 Degree to 45 Degree Fitting Ends,
MetricR(1994)
Hose Assembly, Metal, MediumPressure Flareless, Welded, 45 Degree to 90 Degree Fitting Ends,
MetricR(1994)

Hose Assembly, Metal, MediumPressure Flareless, Welded, 90 Degree to 90 Degree Fitting Ends,
MetricR(1996)
Clamps, Loop or P Style,Single Point Mount, Multiple Shapes, Metric
Clamp, Loop Style, Cushioned,with Wedge, Hydrocarbon Fluid Resistant, Metric
Clamp, Loop Style, Cushioned,with Wedge, Phosphate Ester Fluid Resistant, Metric
Clamp Support, Loop Clamp,Metric
Clamp, Loop Style, withInsert, Hydrocarbon Fluid Resistant, Metric
Clamp, Loop Style, withInsert, Phosphate Ester Fluid Resistant, Metric
Clamp, Loop Style, withInsert, High Temperature, Metric
Clamp Assemblies, Saddle orOmega Style, Two Point Mount, Multiple Shapes, Metric R(2000)
Clamp, Saddle Type, Cushioned,Hydrocarbon Fluid Resistant, Metric
Clamp, Saddle Type, Cushioned,Phosphate Ester Fluid Resistant, Metric
Clamp, Saddle Type, Cushioned,High Temperature, Metric
Clamp, Center Mount, BareMetal, Aluminum, Metric
Clamp, Center Mount, BareMetal, Stainless Steel, Metric
Clamp, Loop Type, Bare Metal,Aluminum, Metric
Clamp, Loop Type, Bare Metal,Stainless Steel, Metric
Clamp, Rectangular, 2 Piece,Cushioned, with Wedges, Hydrocarbon Fluid Resistant, Metric
Clamp, Rectangular, 2 Piece,Cushioned, with Wedges, Phosphate Ester Fluid Resistant, Metric
Clamp, Rectangular, 2 Piece,Cushioned, with Wedges, High Temperature, Metric
Clamp, Rectangular Loop,Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Aluminum, Metric
Clamp, Rectangular Loop,Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Stainless Steel, Metric
Clamp, Rectangular Loop,Cushioned, with Wedge, Phosphate Ester Fluid Resistant, Aluminum, Metric
Clamp, Rectangular Loop,Cushioned, with Wedge, Phosphate Ester Fluid Resistant, Stainless Steel,Metric

Clamp, Rectangular Loop,Cushioned, with Wedge, High Temperature, Stainless Steel, Metric
Clamp, Center Mount, Cushioned,Hydrocarbon Fluid Resistant, Metric
Clamp, Center Mount,Cushioned, Phosphate Ester Fluid Resistant, Metric
Clamp, Center Mount,Cushioned, High Temperature, Metric
Spark Plug Heat RatingClassifications FSC 5330
Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa,Lightweight Beam
Seal, Straight to Straight, Metric R(1994)
Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa,Lightweight Beam
Seal, Straight to 45 Degrees, Metric R(1994)
Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa,Lightweight Beam
Seal, Straight to 90 Degree, Metric R(2000)
Castings, Classification andInspection of AREA NDTI; Should Be Used Instead of MIL-STD-2175A, Which
WasCancelled on 10 November 1999
Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa,Beam Seal,
Straight to Straight, Metric
Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa,Beam Seal,
Straight to 45 Degree, Metric
Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa,Beam Seal,
Straight to 90 Degree, Metric
Fusion Welding for AerospaceApplications AREA THJM; Should Be Used Instead of MIL-STD-2219, Which
WasCancelled on 10 September 1999
Tolerances Corrosion and HeatResistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
Tolerances, Metric Corrosionand Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars andWire
Tolerances Corrosion and HeatResistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, andPlate
Tolerances, Metric Corrosionand Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet,Strip,
and Plate
Tolerances Corrosion and HeatResistant Steel Tubing R(2000)
Tolerances, Metric Corrosionand Heat Resistant Steel Tubing R(2000)
Connections for Fluid Powerand General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring
SealingPart 1: Port with O-Ring Seal in Truncated Housing ISO 6149Chemical Check Analysis LimitsCorrosion and Heat Resistant Steels and Alloys, Maraging and Other HighlyAlloyed Steels, and Iron Alloys R(2000)
(R) Chemical Check Analysis LimitsTitanium and Titanium Alloys

Tolerances Low-Alloy SteelBars

Tolerances, Metric Low-AlloySteel Bars
(R) Tolerances Low-Alloy SteelSheet, Strip, and Plate
(R) Tolerances, MetricLow-Alloy Steel Sheet, Strip, and Plate
Tolerances Carbon and AlloySteel Tubing
Tolerances, Metric Carbon andAlloy Steel Tubing R(1994)
(R) Chemical Check AnalysisLimits Wrought Low-Alloy and Carbon Steels
Tolerances Nickel, NickelAlloy, and Cobalt Alloy Sheet, Strip, and Plate R(1994)
Chemical Check Analysis LimitsNickel, Nickel Alloys, and Cobalt Alloys R(2000)
Ship Systems and Equipment -Threaded Fasteners - Inspection, Test, and Installation Requirements
(R) Fasteners - Part Standard- Cap Screws, Hex Bolts, and Hex Nuts
Cleanliness, Aircraft QualitySteel Magnetic Particle Inspection Procedure
Cleanliness, Aircraft QualitySteel Martensitic Corrosion-Resistant Steels Magnetic Particle
InspectionProcedure
Cleanliness, Aircraft QualitySteel Martensitic Corrosion-Resistant Steels Magnetic Particle
InspectionProcedure Metric (SI) Measurement
Qualification Sampling and Testingof Steels Transverse Tensile Properties
Determination of Delta FerriteContent
Ship Systems and Equipment -Hydraulic Systems - Filter Selection Parameters
Room Temperature TensileProperties of Castings
Elevated Temperature TensileProperties of Castings
Stress-Rupture Properties ofCastings R(1994)
Lubricating Oil, AutomotiveEngine, API Service SJ for Military Administrative Service
Lubricating Oil for WheeledMilitary Vehicles with Heavy-Duty Diesel Engines
Sampling and Testing ofWrought Titanium Raw Material Except Forgings and Forging Stock
Quality Assurance Sampling andTesting Carbon and Low- Alloy Steel Wrought Products and Forging Stock

Quality Assurance Sampling andTesting Corrosion and Heat Resistant Steels and Alloys Wrought Products
andForging Stock
Control of Forgings RequiringFirst Article Approval
Plating, Cadmium
(R) Plating, Cadmium LowHydrogen Content Deposit
(R) Plating, ElectrolessNickel
Plating, Chromium Hard Deposit
Plating, Immersion Tin forAluminum Alloys
Plating, Silver Nickel Strike,High Bake
(R) Plating, Silver for HighTemperature Applications
(R) Plating, Silver CopperStrike, Low Bake
Plating, Silver-Rhodium
Plating, Lead and Indium
Plating, Nickel-CadmiumDiffused
(R) Plating, Zinc-Nickel Alloy
Plating, Copper
(R) Plating of Aluminum forSolderability Zinc Immersion Pre-Treatment Process
Plating, Nickel Low-StressedDeposit
Plating, Gold for ThermalControl
Shot Peening
(R) Plating,Nickel-Thallium-Boron or Nickel-Boron Electroless Deposition
Plating, Tin-Zinc Alloy
Coating, Tungsten Carbide-CobaltDetonation Process

Coating, Aluminum OxideDetonation Deposition

Disilicide Diffusion Coatingof Molybdenum and Molybdenum Alloys Pack Cementation Method R(1995)
(R) Hard Anodic CoatingTreatment of Aluminum and Aluminum Alloys Processing and
PerformanceRequirements
Anodic Treatment of AluminumAlloys Chrome Acid Process
(R) Anodic Treatment ofAluminum Alloys Sulfuric Acid Process, Undyed Coating
Anodic Treatment of AluminumAlloys Sulfuric Acid Process, Dyed Coating
Protective TreatmentsMagnesium Alloys
Black Oxide Coating
Conversion Coating of TitaniumAlloys Fluoride- Phosphate Type R(1994)
Surface Treatment ofPolytetrafluoroethylene Preparation for Bonding R(1994)
Polytetrafluoroethylene (PTFE)Resin Coating Low Build, 370 - 400 Degrees C (698 - 752 Degrees F)
FusionR(1994)
Ring - Back-Up, PortConnection, AMS 3660, Metric R(1991)
Polytetrafluoroethylene (PTFE)Resin Coating High Build, 370 Degrees - 400 Degrees C (698 Degrees 752Degrees F) Fusion R(1994)
Thread Compound, Anti-Seize,Graphite-Petrolatum R(1994)
Nut - Hex, Back-Up Ring PortFitting Connector, AMS 5639, MJ Thread, Metric R(1991)
Nut, Plain, Hexagon, PortFitting Connector, AMS 5639, MJ Thread, Metric R(1991)
Coating, Vapor DepositedPoly-Monochloro-Para-Xylylene for Microcircuits R(1994)
Gasket, Metal C-Ring, FaceSeal, Internal Pressure, UNS N07750 Silver Plated, Metric
Groove Design, Metal C-RingGasket, Face Type Internal Pressure, Metric
Pressure Testing, GaseousMedia 10 psi
Pressure Testing 25 psiR(1995)
Pressure Testing, GaseousMedia 40 psi
Pressure Testing 55 psiR(1995)
Pressure Testing 70 psiR(1995)

Pressure Testing 100 psiR(1995)

Pressure Testing, Hydraulic200 psi R(1995)
Pressure Testing, Hydraulic1000 psi
Pressure Testing, Hydraulic2500 psi
Fluid, Jet Reference FSC 9130R(2001)
Inspection, Ultrasonic Productover 0.5 Inch (12.7 mm) Thick
Ultrasonic Inspection Titaniumand Titanium Alloy Bar and Billet
Inspection, Ultrasonic, ofThin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness
Ultrasonic InspectionCentrifugally-Cast, Corrosion- Resistant Steel Tubular Cylinders
Ultrasonic Inspection ThinWall Metal Tubing
Structural Examination ofTitanium Alloys Chemical Etch Inspection Procedure
Inspection Material, Penetrant
Hardness and ConductivityInspection of Wrought Aluminum Alloy Parts
Brazing, Aluminum Torch orFurnace
Welding, Electron-Beam
Pyrometry R(1994)
Nitriding, Molten Salt Bath
Heat Treatment of Steel PartsGeneral Requirements
Gas Nitriding and HeatTreatment of Low-Alloy Steel Parts R(1992)
Gas and Vacuum Carburizing andHeat Treatment of Carburizing Grade Steel Parts
Carburizing Carbon andLow-Alloy Steel Parts
Heat Treatment of WroughtAluminum Alloy Parts (SUPERSEDING: SAE AMS-H-6088) R(1994)

Identification Finished PartsR(1994)

Heat Treatment of TitaniumAlloy Parts
Identification Castings
Identification Forgings
Identification and PackagingElastomeric Products R(1993)
Packaging and Marking ofPackages of Welding Wire Standard Method
Identification Welding Wire,Tab Marking Method
Packaging and IdentificationPreformed Packings
Material Safety Data SheetsR(1992)
Fluid, Reference for TestingDi-Ester (Polyol) Resistant Material
Polyalkylene Glycol Heat TreatQuenchant
Magnetic Particles,Nonfluorescent Dry Method
Magnetic Particles,Nonfluorescent Wet Method, Oil Vehicle, Ready-to-Use
Magnetic Particles,Nonfluorescent Wet Method, Dry Powder
Magnetic Particles,Nonfluorescent Wet Method, Oil Vehicle, Aerosol Packaged
Magnetic Particles,Fluorescent Wet Method, Dry Powder
Magnetic Particles,Fluorescent Wet Method, Oil Vehicle, Ready-to-Use
Magnetic Particles,Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged
Lubricant, Instrument Bearing,Petroleum Base Viscosity 15 R(1994)
Lubricant, Instrument Bearing,Petroleum Base Viscosity 35
Bolts, Screws and Studs, ScrewThread Requirements R(1991)
Nut, Self-Locking, DoubleHexagon, Reduced Envelope, AMS 7251 R(1991)

(R) Nut, Self-Locking, DoubleHexagon, Reduced Envelope AS 7251; FSC 5310

Nut, Self-Locking, DoubleHexagon, Reduced Envelope, AMS 7251 R(1991)
Nut, Self-Locking, DoubleHexagon, Reduced Envelope, AMS 7251 R(1991)
Nut, Self-Locking, DoubleHexagon, Reduced Envelope, AMS 7251 R(1991)
(R) Acceptance Criteria -Magnetic Particle, Fluorescent Penetrant, and Contrast Dye PenetrantInspection
Insert - CRES Helical CoilFine Thread, Straight Stud Locking, 1.5 Dia Nom Length R(1991)
Insert - CRES Helical CoilFine Thread, Straight Stud Locking, 2 Dia Nom Length R(1991)
Insert - CRES Helical CoilFine Thread, Straight Stud Locking, 2.5 Dia Nom Length R(1991)
Insert - CRES Helical CoilFine Thread, Straight Stud Locking, 3 Dia Nom Length R(1991)
Stud-Straight, Key Locked,Steel .190-32 UNJF X .190- 32 UNJF R(1991)
Stud - Straight, Key Locked,Steel .250-28 UNJF X .250- 28 UNJF R(1991)
Stud - Straight, Key Locked,Steel .3125-24 UNJF X .3125-24 UNJF R(1991)
Stud - Straight, Key Locked,Steel .325-24 UNJF X .375- 24 UNJF R(1991)
Stud - Straight, Key Locked,CRES AMS 5731 .190-32 UNJF X .190-32 UNJF R(1991)
Stud - Straight, Key Locked,CRES AMS 5731 .250-28 UNJF X .250-28 UNJF R(1991)
Stud - Straight, Key Locked,CRES AMS 5731 .3125-24 UNJF X .3125-24 UNJF R(1991)
Stud - Straight, Key Locked,CRES AMS 5731 .375-24 UNJF X .375-24 UNJF R(1991)
Insert - CRES Helical Coil FineThread, Locking (Low Friction Systems) 1.5 Dia Nom Length R(1991)
Insert - CRES Helical CoilFine Thread, Locking (Low Friction Systems) 2 Dia Nom Length R(1991)
Insert - CRES Helical CoilFine Thread, Locking (Low Friction Systems) 2.5 Dia Nom Length R(1991)
Insert - CRES Helical CoilFine Thread, Locking (Low Friction Systems) 3 Dia Nom Length R(1991)
Screw, Machine - Hexagon Head,PD Shank, CRES AMS 5731, .164-36 UNJF-3A R(1991)
Adhesion Promoter forPolysulfide Sealing Compounds R(2000)
Screw, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, CRES AMS 5731, .164-36 UNJF-3A R(1991)
Primer, Adhesive,Corrosion-Inhibiting for High Durability Structural Adhesive Bonding FSC 8040R(2001)
Primer, Adhesive,Corrosion-Inhibiting High Durability Epoxy, -55 Degrees to +95 Degrees C (-67Degrees to
+203 Degrees F) R(2001)
Primer, Adhesive,Corrosion-Inhibiting High Durability Epoxy, -55 Degrees to +120 Degrees C(-67 Degrees to
+248 Degrees F) R(2001)
Primer, Adhesive,Corrosion-Inhibiting High Durability Epoxy, -55 to +175 Degrees C (-67 to+347 Degrees F)
R(1997)
Primer, Adhesive, Corrosion-InhibitingHigh Durability Epoxy, -55 to +215 Degrees C (-67 to +419 Degrees F)
R(1997)
Plug, Expansion - Aluminum,2024-T4, Long; Std and .010 Oversize Diameters R(1991)
Pin, Expansion - Aluminum,(2024-T4), Long R(1991)
Plug, Expansion - Aluminum,2024-T4, Short; Std and .010 Oversize Diameters R(1991)
Pin, Expansion - Aluminum,(2024-T4), Short R(1991)
Plug, Expansion - CRES, 416,Long; Std and .010 Oversize Diameters R(1991)

Pin, Expansion - CRES, 416,Long R(1991)

Plug, Expansion - CRES, 416,Short; Std and .010 Oversize Diameters R(1991)
Pin, Expansion - CRES, 416,Short R(1991)
Plug, Expansion - CRES, 303,Long; Std and .010 Oversize Diameters R(1991)
Pin, Expansion - CRES, 303,Long R(1991)
Plug, Expansion - CRES, 303,Short; Std and .010 Oversize Diameters R(1991)
Pin, Expansion - CRES, 303,Short R(1991)
Coating Material, SiliconeResin 205 Degrees C (400 Degrees F) Cure R(1994)
Coating Material, PhenolicResin PTFE Pigmented, 150 Degrees C (302 Degrees F) Cure
(R) Coating Materials,Fluorocarbon (FKM) Elastomeric
(R) Coating Material,Fluorocarbon (FKM), Elastomeric Rain-Erosion Resistant, Black
(R) Coating Material,Fluorocarbon (FKM) Elastomeric Rain-Erosion and Thermal-Flash Resistant,White
(R) Coating Material,Fluorocarbon (FKM) Elastomeric Anti-Static Topcoating, Black
Stud, Stepped - 2.5 DiaEngagement, PD Shank, AMS 5731 .5625-18 UNJF-3A X .500-20 UNJF-3A R(1995)
Fluid, Aircraft Compass
Nut, Plain-O.D. Slots, KeyWasher Locked, AMS 6233, MIL-S-8879 R(1991)
(R) Solvents, Cleaning,Cleaning Prior to Application of Sealing Compounds
Magnesium Alloy, Processes forPretreatment and Prevention of Corrosion on
Bolt, Machine - Double HexExtended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .190-32 UNJF3AR(1991)
Bolt, Machine - Double HexExtended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .250-28 UNJF3AR(1991)
Bolt, Machine - Double HexExtended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .3125-24 UNJF3AR(1991)
Bolt, Machine - Double HexExtended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .375-24 UNJF3AR(1991)
Silicone Rubber Sponge ClosedCell, Medium, Extreme Low Temperature R(2001)
Silicone Rubber Sponge ClosedCell, Firm, Extreme Low Temperature R(2001)
Silicone Rubber Sponge ClosedCell, Medium R(1996)
Sponge, Silicone Rubber ClosedCell, Firm R(1996)

Sponge, Chloroprene (CR)Rubber Soft R(1998)

Sponge, Chloroprene (CR)Rubber Medium Stiffness R(1998)
Sponge, Chloroprene (CR)Rubber Firm R(1998)
Butadiene Acrylonitrile (NBR)Rubber Petroleum-Base Hydraulic Fluid Resistant 55 - 65
Butadiene Acrylonitrile (NBR)Rubber Dry Heat Resistant 35 - 45
Butadiene Acrylonitrile (NBR)Rubber Dry Heat Resistant 55 - 65
Rubber, SyntheticLow-Temperature Resistant 25 - 35
Synthetic Rubber Low-TemperatureResistant 45 - 55
Chloroprene (CR) RubberWeather Resistant 25 - 35
Chloroprene (CR) RubberWeather Resistant 45 - 55
Packing, Preformed - AMS 7276- Seal R(1991)
Chloroprene (CR) RubberWeather Resistant 65 - 75
Packing, Preformed - AMS 7276,'O' Ring R(1991)
Acrylonitrile Butadiene (NBR)Rubber Aromatic Fuel Resistant 55 - 65 R(1998)
Acrylonitrile Butadiene (NBR)Rubber Aromatic Fuel Resistant 75 - 85 R(1996)
Acrylonitrile Butadiene (NBR)Rubber Aromatic Fuel Resistance 35 - 45 R(1998)
Acrylonitrile Butadiene (NBR)Rubber Aromatic Fuel Resistant 65 - 75 R(1995)
Ring, Retaining-Spiral,Internal, Heavy Duty, CRES R(1991)
Ring, Retaining-Spiral,External, Heavy Duty, CRES R(1991)
Standard Elastomer Stocks TestSlabs R(1998)
Test Slabs, AcrylonitrileButadiene (NBR-H) Medium- High Acrylonitrile, 65 - 75
Test Slabs, AcrylonitrileButadiene (NBR-L) Low Acrylonitrile, 65 - 75
Test Slabs, Chloroprene (CR)65 - 75

Test Slabs, Fluoroelastomer(FKM) 65 - 75 R(1998)

Test Slabs, Fluorosilicone(FVMQ) 55 - 65
Test Slabs, PhosphonitrilicFluoroelastomer (FZ) 65 - 75
Ring, Retaining-Spiral,Internal, Light Duty, CRES R(1991)
Ring, Retaining-Spiral,External, Light Duty, CRES R(1991)
Ring, Retaining, Spiral,Minimum Distortion, Dimensional and Acceptance Standard for R(1991)
Rubber, Synthetic GeneralPurpose, Fluid Resistant 55 - 65 R(1995)
Sleeve, Flared, Tube Fitting -Aluminum FSC 4730
Synthetic Rubber Hot OilResistant, High Swell 45 - 55 R(1998)
Acrylonitrile Butadiene (NBR)Rubber Hot Oil and Coolant Resistant, Low Swell 45 - 55 R(1995)
Acrylonitrile Butadiene (NBR)Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65 R(1995)
Rivet - Tubular, Countersunk,AS 7228
Rivet - Tubular, Universal, AS7228
Rivet - Tubular, Countersunk,AS 7232
Rivet - Tubular, Universal, AS7232
Bolt, Tee Head - AMS 5708,Chamfered, .1900-32 UNJF-3A R(1991)
Bolt, Tee Head - AMS 5708,Chamfered, .2500-28 UNJF-3A R(1991)
Bolt, Tee Head - AMS 5708,Chamfered, .3125-24 UNJF-3A R(1991)
Bolt, Tee Head - AMS 5708,Chamfered, .3750-24 UNJF-3A
Butyl (IIR) Rubber PhosphateEster Resistant 35 - 45
Butyl (IIR) Rubber PhosphateEster Resistant 65 - 75 R(1994)
Butyl (IIR) Rubber PhosphateEster Resistant 85 - 95 R(1999)
Chloroprene (CR) RubberWeather Resistant 35 - 45 R(1999)
Chloroprene (CR) RubberWeather Resistant 55 - 65 R(1999)

Chloroprene (CR) Rubber FlameResistant 55 - 65

Chloroprene (CR) Rubber FlameResistant 65 - 75
Ethylene Propylene (EPM)Rubber Phosphate Ester Resistant 55 - 65 R(2001)
Ethylene Propylene (EPDM)Rubber Hydrazine-Base-Fluid Resistant 75 - 85 R(1998)
Synthetic Rubber and CorkComposition General Purpose Medium R(2001)
Clamp, Loop-Cushioned, CRES,High Temperature, .204 Hole Inactive for New Design After April 1, 1987
Pin - Cotter, CRES AMS 7211,Metric Series R(1991)
Identification of StandardUtility Parts - Bolts and Nuts R(1991)
Ethylene-Propylene-Diene(EPDM) Rubber General Purpose 45 - 55 R(2001)
Nut, Self-Locking, Clip,Floating, AMS 7251 R(1991)
Nut, Self Locking - SplineDrive, Extended Washer UNS S66286, Silver Plate, MJ Thread, Metric R(1991)
Sealing Compound, Polysulfide(T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities
HighStrength, for Intermittent Use to 360 Degrees F (182 Degrees C)
Chloroprene (CR) Rubber Sheet,Cotton Fabric Reinforced Weather Resistant R(1995)
Cloth, Nylon, PolyurethaneCoated Thermally, Radio Frequency, or Ultrasonically Sealable R(1995)
Nut - Self-Locking, Clinch,Serrated Shank, 700 Degrees F, Dry Film Coated, UNS S66286, UNJ Thread
Chloroprene (CR) Rubber Sheet,Nylon Cloth Reinforced Weather Resistant R(1995)
Nut - Self-Locking, Clinch,Serrated Shank, 1200 Degrees F, Silver Plated, UNS S66286, UNJ Thread
Acrylonitrile Butadiene (NBR)Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant
R(1995)
Nut - Self-Locking, Clinch,Serrated Shank, 400 Degrees C, Dry Film Coated, UNS S66286, MJ Thread, Metric
Sheet, Acrylonitrile Butadiene(NBR) Rubber and Non- Asbestos Fiber Fuel and Oil Resistant
Nut - Self-Locking, Clinch,Serrated Shank, 650 Degrees C, Silver Plated, UNS S66286, MJ Thread, Metric
Sealing Compound, IntegralFuel Tanks and General Purpose, Intermittent Use to 360 Degrees F (182Degrees
C)
Sealing Compound,Polythioether Integral Fuel Tanks and General Purpose, Fast CuringIntermittent Use to 360
Degrees F (182 Degrees C)
Insert, Screw Thread, HelicalCoil, Metric Series, Free Running, CRES, Uncoated
Insert, Screw Thread, HelicalCoil, Metric Series, Free Running, CRES, Dry Film Lubricated

Sealing Compound, Polysulfide(T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities LowDensity
(1.20 to 1.35 sp gr), for Intermittent Use to 360 Degrees
Insert, Screw Thread, HelicalCoil, Metric Series, Free Running, CRES, Cadmium Plated
Bolt, Machine-Hex Head-PDShank-MJ Thread, AMS 5731, Metric
Bolt, Machine-Spline ExtendedWasher, PD Shank Long Thread, AMS 5731, Metric R(1991)
Nut, Plain Hex - UNS S66286,MJ Thread, Metric R(1991)
Bolt, Machine-Hex Head- PDShank MJ Thread, AMS 6322, Cadmium Plate, Metric R(1991)
Nut, Self-Locking, DoubleHexagon, AMS 5709 R(1993)
Clip - Spring, Tension, Outer5.5 mm Bolt Hole, AMS 5525, Metric
Clip - Spring, Tension, Inner5.5 mm Bolt Hole, AMS 5525, Metric
Cushion - Tube Clamp Support,PTFE, Metric
Silicone, Rubber GeneralPurpose 40 Durometer R(2001)
Silicone Rubber GeneralPurpose 50 Durometer R(2001)
Nut, Plain Hex - UNS G87400,Cadmium Plate, MJ Thread, Metric R(1991)
Silicone, Rubber GeneralPurpose 60 Durometer R(2001)
Bolt, Machine - Hexagon Head,PD Shank, AMS 5708, .190- 32 UNJF-3A R(1991)
Silicone, Rubber GeneralPurpose 70 Durometer R(2001)
Bolt-Machine, Hex Head,Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric R(1991)
Silicone, Rubber GeneralPurpose 80 Durometer R(2001)
Rubber, Silicone (VMQ) LowCompression Set, Non-Oil- Resistant 65 - 75 R(1995)
Bolt, Machine - Hexagon Head,PD Shank, AMS 5708, .250- 28 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,PD Shank, AMS 5708, .3125-24 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,PD Shank, AMS 5708, .375- 24 UNJF-3A R(1991)
Silicone (VMQ) Rubber Sheet,Glass Cloth Reinforced R(1995)
Stud - Straight, Ring Locked,CRES AMS-5731 0.190- 24UNJC X 0.190- 32UNJF
Silicone (VMQ) Rubber Sheet,Glass Cloth Reinforced Heat and Weather Resistant 60 - 80 R(2001)
Stud - Straight, Ring Locked,CRES AMS-5731 0.250- 20UNJC X 0.250- 28UNJF
Stud - Straight, Ring Locked,CRES AMS-5731 0.3125- 18UNJC X 0.3125- 24UNJF
Stud - Straight, Ring Locked,CRES AMS-5731 0.375- 16UNJC X 0.375- 24UNJF

Sponge, Fluorosilicone (FVM)Rubber Closed Cell R(2001)

Fluorosilicone (FVMQ) RubberFuel and Oil Resistant 55 - 65 R(2001)
Fluorosilicone (FVMQ) RubberHigh Temperature Fuel and Oil Resistant 70 - 80 R(2001)
Fluorosilicone (FVMQ) RubberFuel and Oil Resistant 35 - 45 R(2001)
Fluorosilicone (FVMQ) RubberFuel and Oil Resistant, High Strength 45 - 55 R(2001)
Insert, Screw Thread, HelicalCoil, Metric Series, Screw Locking, CRES, Uncoated
Fluorosilicone (FVMQ) RubberFuel and Oil Resistant 45 - 55 R(2001)
Insert, Screw Thread, HelicalCoil, Metric Series, Screw Locking, CRES, Dry Film Lubricated
Fluorosilicone (FVMQ) RubberFuel and Oil Resistant 65 - 75 R(2001)
Insert, Screw Thread, HelicalCoil, Metric Series, Screw Locking, CRES, Cadmium Plated
Silicone Rubber ExtremeLow-Temperature Resistant 15 - 30 R(2001)
Silicone Rubber ExtremeLow-Temperature Resistant 35 - 45 R(2001)
Silicone (PVMQ) RubberExtreme-Low-Temperature Resistant 55 - 65 R(2001)
Silicone (PVMQ) RubberExtreme-Low-Temperature Resistant 65 - 75 R(1998)
Silicone (PVMQ) RubberExtreme-Low-Temperature Resistant 75 - 85 R(1998)
Bolt, Machine-Hex Head, PDShank, Long Thread, AMS 5662, Metric R(1991)
Bolt, Machine-Spline ExtendedWasher, PD Shank, Long Thread, AMS6322, Cadmium Plated, Metric R(1991)
Bolt, Machine-Spline ExtendedWasher, PD Shank, Long Thread, AMS 5662, Metric
Bolt, Machine-Spline ExtendedWasher, Full Shank, Long Thread, AMS 5731 Metric R(1991)
Bolt, Machine-Spline ExtendedWasher, Full Shank, Drilled, Long Thread, AMS 5731, Metric R(1991)
Bolt, Machine-Spline DriveExtended Washer Head, Full Shank, Long Thread, AMS5662, Metric R(1991)
Nut, Plain Hex - Thin, UNSS66286, MJ Thread, Metric R(1991)
Silicone Rubber 1000 psi (6.90MPa) Tensile Strength 45 - 55 R(1996)
Silicone Rubber 1000 psi (6.89MPa) Minimum Tensile Strength 55 - 65 Durometer

Rubber, Silicone 1200 psi(8.27 MPa), High Modulus 45 - 55 R(1995)

Bolt, Machine-Hex Head- FullShank, Long Thread, AMS 5731 Metric R(1991)
Silicone (VMQ) Rubber 1150 psi(7.93 MPa) Tensile Strength, High Resiliency 25 - 35 R(2000)
Bolt, Spline Drive ExtendedWasher Head, PD Shank, Long Thread, AMS 5708, Metric
Silicone (VMQ) Rubber 1100 psi(7.58 MPa) Tensile Strength, High Resiliency 65 - 75 R(1998)
Nut, Self Locking - ReducedHex Drive, UNS S66286, Silver Plate, MJ Thread, Metric R(1991)
Nut, Castellated, Hex - UNSS66286, MJ Thread, Metric R(1991)
Nut, Spline Drive - ExtendedWasher, Cupwasher Lock, UNS S66286, Silver Plate, MJ Thread, Metric R(1991)
Packing, Preformed - O-RingSeal, AMS 7276, Metric R(1991)
Nut, Self Locking - SplineDrive, Extended Washer, UNS G87400, Cadmium Plate, MJ Thread, Metric R(1991)
Nut, Plain Hex - Thin, UNSG87400, Cadmium Plate, MJ Thread, Metric R(1991)
Silicone (VMQ) RubberLubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65R(1995)
Rubber, Silicone (VMQ)Lubricating Oil and Compression Set Resistant 65 - 75 R(1995)
Bolt, Machine - Hex Head,Drilled, Full Shank, Long Thread, AMS 5731, Metric R(1991)
Bolt, Machine-Spline Drive,Extended Washer Head, Full Shank, LG Thread, AMS 5662, Metric R(1991)
Bolt, Machine-Spline ExtendedWasher, PD Shank, Long Thread, Drilled, AMS5662 Metric R(1991)
Bolt, Machine-Hex Head, Drilled,PD Shank, Long Thread, AMS 5662, Metric R(1991)
Bolt, Spline Drive ExtendedWasher Head, Drilled, PD Shank, Long Thread, AMS 5708, Metric
(R) Sealing Compound AircraftFirewall
(R) Bolts and Screws, UNS S66286,Corrosion and Heat Resistant Steel, Procurement Specification, Metric
(FSC5306)
Adhesive/Sealant,Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
Bolts & Screws, UNS G87400Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric
FSC5306
(R) Bolts and Screws, NickelAlloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification,
Metric(FSC 5306)
(R) Bolts and Screws, UNSN07001 Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled BeforeAging,
Procurement Specification, Metric FSC 5306
Stud, Straight - 2.5 DiaEngagement, A286, MJ Metric 6 x 1 - 6 x 1 R(1993)
Hose, PolytetrafluoroethyleneTFE Fluorocarbon Resin Wire Braid Reinforced R(1995)
Stud, Straight - 2.5 DiaEngagement, A286, MJ Metric 7 x 1 - 7 x 1 R(1993)
Stud, Straight - 2.5 DiaEngagement, A286, MJ Metric 8 x 1 - 8 x 1 R(1993)
Tetrafluoroethylene/PropyleneRubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 to 80 and 85
to95

Stud, Straight - 2.5 DiaEngagement, A286, MJ Metric 10 x 1.25 - 10 x 1.25 R(1993)

Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 6 x 1 - 5 x 0.8 R(1993)
Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 7 x 1 - 6 x 1 R(1993)
Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 8 x 1 - 7 x 1 R(1993)
Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 10 x 1.25 - 8 x 1 R(1993)
Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 12 x 1.25 - 10 x 1.25 R(1993)
Stud, Stepped - 2.0 DiaEngagement, A286, MJ Metric 6 x 1 - 5 x 0.8 R(1993)
Stud, Stepped - 2.0 Dia Engagement,A286, MJ Metric 7 x 1 - 6 x 1 R(1993)
Stud, Stepped - 2.0 DiaEngagement, A286, MJ Metric 8 x 1 - 7 x 1 R(1993)
Stud, Stepped - 2.0 DiaEngagement, A286, MJ Metric 10 x 1.25 - 8 x 1 R(1993)
Stud, Stepped - 2.0 DiaEngagement, A286, MJ Metric 12 x 1.25 - 10 x 1.25 R(1993)
Clip - Spring, Tension, Outer6.7 mm Bolt Hole, AMS 5525, Metric
Clip - Spring, Tension, Inner6.7 mm Bolt Hole, AMS 5525, Metric
Bolt, Machine-Hex Head-Drilled, PD Shank, Long Thread, AMS 5731, Metric R(1991)
Clamp - Tube Support, SpringClips and PTFE Cushion Procurement Specification for
Bolt, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, AMS 5708, .190-32 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, AMS 5708, .250-28 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, AMS 5708, .3125-24 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, AMS 5708, .375-24 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,Drilled 6 Holes, PD Shank, AMS 5708, .190-32 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,Drilled 6 Holes, PD Shank, AMS 5708, .250-28 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,Drilled 6 Holes, PD Shank, AMS 5708, .3125-24 UNJF-3A R(1991)
Bolt, Machine - Hexagon Head,Drilled 6 Holes, PD Shank, AMS 5708, .375-24 UNJF-3A R(1991)
(R) Flux, Silver Brazing
(R) Flux, Silver Brazing HighTemperature
Flux, Aluminum Brazing forTorch or Furnace Brazing
Flux, Aluminum Dip Brazing1030 Degrees F (554 Degrees C) or Lower Liquidus
Nut, Plain Hex - Drld, UNSG87400, Cadmium Plate, MJ Thread, Metric R(1991)
Nut, Plain Hex - UNS S66286,Silver Plate, MJ Thread, Metric R(1991)
Nut, Plain Hex - Drld, UNSS66286, Silver Plate, MJ Thread, Metric R(1991)
Nut, Plain Hex - Thin, UNSS66286, Silver Plate, MJ Thread, Metric R(1991)
Nut, Castellated, Hex - UNSG87400, Cadmium Plate, MJ Thread, Metric R(1991)
Nut, Castellated, Hex - UNSS66286, Silver Plate, MJ Thread, Metric R(1991)
Nut, Castellated, Hex - Thin,UNS G87400, Cadmium Plate, MJ Thread, Metric R(1991)
Nut, Castellated, Hex - Thin,UNS S66286, Silver Plate, MJ Thread, Metric R(1991)
Nut, Self Locking, SplineDrive, Extended Washer, UNS N07001, Silver Plate, MJ Thread, Metric R(1991)
Nut, Self Locking - Shank UNSN07001, Silver Plate, MJ Thread, Metric FSC 5310
Packing, Preformed - O-RingSeal, AMS 7273, Metric R(1991)
Spacer, Sleeve - for .190 InchBolt, AMS4901 or AMS4921 R(1991)
Spacer, Sleeve - for .250 InchBolt, AMS4901 or AMS4921 R(1991)

Spacer, Sleeve - for 5mm Bolt,AMS4901 or AMS4921, Metric R(1991)

Spacer, Sleeve - for 6mm Bolt,AMS4901 or AMS4921, Metric R(1991)
O-Ring Groove Design forPacking Preformed, Elastomeric O-Ring Seals, Static, Axial Compression,Metric
FSC 5330
O-Ring Groove Design forPacking Preformed, Elastomeric O-Ring Seals, Static, Radial Squeeze, Metric
Packing, Preformed - O-RingSeal, AMS 7267, Metric R(1991)
Nut, Self Locking - SplineDrive, Captive Washer, UNS S66286, Silver Plate, MJ Thread, Metric
Packing, Preformed O-RingSeal, Fluorocarbon (MIL-R- 83485, Type I), Metric R(1993)
Bolt, Machine - Tee Head,Chamfered Classification: 1210 MPa /730 Degrees C Close Tol Shank, UNSN07001,
Metric FSC 5306
Bolt, Machine - Spline DriveHD, Close Tol Full Shank, AMS-5662, Metric
Bolt, Spline Drive SpecialExtended Washer Head, Reduced Head, PD Shank, AMS 5708, Metric
Bolt, Spline Drive ExtendedWasher Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric
Retainer, Nut and Bolt, CupLock 5 mm and 6 mm, AMS 5510, Metric
Washer, Flat, AMS-5525, Metric
Bolt, Machine - SplineExtended Washer, Full Head, PD Shank, Long Thread, AMS 5662 - Metric
Nut, Self Locking - DoubleHexagon, Extended Washer, UNS S66286, Silver Plated, UNJ Thread FSC 5310
(R) Nut, Self-Locking, Plate,One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F
(R) Nut, Self-Locking, Plate,One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125
ksi/800Degrees F
Nut, Self-Locking, Plate, TwoLug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286 Class:
125ksi/800 Degrees F fsc 5310
(R) Nut, Self-Locking, Plate,Side by Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class:
125ksi/800 Degrees F
(R) Nut, Self-Locking,Hexagon, Regular Height, UNS S66286, Class: 125 ksi/800 Degrees F
Nut, Self-Locking, 12 Point,Reduced Height, Silver Plate, UNS S66286
(R) Nut, Self-Locking, ExtendedDouble Hexagon, Reduced Flange, Dry Film Lube, UNS S66286, Class: 160
KSI/800Degrees F
Stud-Stepped, 1.5 DIAEngagement, .375-16 UNJC-3A Mod X .3125-24 UNJF-3A (UNS S66286)
Gasket - Type X or XV EngineAccessory Drive
Gasket - Type XI EngineAccessory Drive
Gasket - Type XII, XIV A andXIV B Engine Accessory Drive
Gasket - Type XIII EngineAccessory Drive
Gasket - Type XIV-C EngineAccessory Drive
Gasket - Type XVI EngineAccessory Drive
Gasket - Type XIX EngineAccessory Drive
Gasket - Engine AccessoryDrive
Insert - Thin Wall, ShortSelf-Locking, 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread
Insert - Thin Wall, LongSelf-Locking 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread

Insert - Screw Thread, ThinWall, Self-Locking UNS NO7718, Silver Plated, Class: 185 ksi/1025 Degrees
F,Procurement Specification (FSC5340)
Cable, Safety, Kit - Corrosionand Heat Resistant Steel, UNS S32100
Cable, Safety, Kit - CorrosionResistant Steel, UNS S30400
Plastic Sheet and Film, VinylCopolymers Unplasticized R(1998)
Assembly Nut and Clip,Removable Self-Locking Nut, UNS S66286
Basket, Removable Self-LockingNut, UNS S66286
Sleeve, Removable Self-LockingNut, UNS S30403
Assembly Nut, Plate, RemovableSelf-Locking Nut
Packing, Preformed - O-RingSeal AMS 7272
Sheet, Polyether Urethane (EU)Elastomer Foam Shock Absorbing R(2001)
Foam, Polyether Urethane (EU)Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density R(1993)
Foam, Polyether Urethane (EU)Elastomer, Shock Absorbing 15 Pounds/ Cubic Foot (240 kg/m3) Density
R(1998)
Foam, Polyether Urethane (EU)Elastomer, Shock Absorbing 20 Pounds/ Cubic Foot (320 kg/m3) Density
R(1998)
Packing, Preformed - O-RingSeal AMS 7270
Foam, Flexible PolyurethaneOpen Cell, Medium Flexibility R(2001)
Packing, Preformed - O-RingSeal AMS 7274
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled FSC 9320 R(2001)
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 45 Durometer "A" R(2001)
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 55 Durometer "A" R(2001)
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 65 Durometer "A" R(2001)
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 75 Durometer "A" R(2001)
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 85 Durometer "A" R(2001)
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 95 Durometer "A" R(2001)
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 55 Durometer "D" R(2001)
Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 65 Durometer "D" R(2001)

Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 75 Durometer "D" R(2001)
Bolt, Shear - Double Hex Head,UNS N07718 - 185 ksi
Rivet-Solid, Universal Head,AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric
Pin, Spring - Tubular, Coiled,Standard Duty, UNS N07718
Packing, Preformed - O-RingSeal AMS 7271 FSC 5330
Bolt, Machine - Double HexHead, PD Shank, UNS N07718 - 185 ksi
Packing, Preformed - O-RingSeal AMS 7259
Packing, Preformed - O-RingSeal AMS 3304
Pin and Plug, Expansion, KitCres, 416, Long
Pin and Plug, Expansion, KitCres, 416, Short
Pin and Plug, Expansion, KitCres, 303, Long
Pin and Plug, Expansion, KitCres, 303, Short
Pin and Plug, Expansion, KitAl Alloy 2024, Short
Pin and Plug, Expansion, KitAl Alloy 2024, Long
Plastic Sheet Cotton FabricReinforced Phenol- Formaldehyde R(1998)
Plastic Sheet, PolycarbonateGeneral Purpose
Film, Copper Clad Polyester
Plastic Tubing Cotton FabricReinforced Phenol- Formaldehyde
Resin, Polyimide, LaminatingHigh Temperature Resistant, 315 Degrees C (599 Degrees F)
Tubing, IrradiatedPolychloroprene Elastomer, Electrical Insulation Flexible, Heat-Shrinkable,1.750 to 1 Shrink
Ratio
Plastic Extrusions andMoldings, Polycarbonate General Purpose
Tubing, Plastic, ElectricalInsulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2to 1
Shrink Ratio R(1995)
Plastic Sheet and Strip,Modified Vinyl, Foamed Closed Cell
Tubing, Plastic, ElectricalInsulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1Shrink
Ratio R(1995)
Tubing, Irradiated PolyolefinPlastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to
1Shrink Ratio
Sheet,Polychlorotrifluoroethylene (PCTFE) Molded, Unplasticized R(1995)
Polyfluoroethylene-PropyleneFilm and Sheet
Tubing,Polychlorotrifluoroethylene (PCTFE) Unplasticized R(1998)

Film,Polychlorotrifluoroethylene (PCTFE) Unplasticized R(1995)

Rods, Sheets, and MoldedShapes, Polychlorotrifluoroethylene (PCTFE) Unplasticized R(1995)
Polytetrafluoroethylene (PTFE)Film Non-Critical Grade R(1999)
Tubing, Electrical InsulationStandard Wall, Extruded Polytetrafluoroethylene (PTFE) R(1999)
Tubing, Electrical InsulationLight Wall, Extruded Polytetrafluoroethylene (PTFE) R(1999)
Tubing, Electrical InsulationThin Wall, Extruded Polytetrafluoroethylene (PTFE) R(1999)
PolytetrafluoroethyleneExtrusions Normal Strength, as Sintered
Polytetrafluoroethylene Film,General Purpose Grade
Polytetrafluoroethylene (PTFE)Sheet, Glass Cloth Reinforced R(1998)
Polytetrafluoroethylene (PTFE)Moldings Premium Grade, as Sintered
Insulation, Thermal CeramicFiber
Insulation, Thermal SilicaFiber
Adhesive, Polyimide Resin,Film and Paste High Temperature Resistant, 315 Degrees C (599 Degrees
F)R(1995)
Adhesive, Foaming, HoneycombCore Splice, Structural - 55 Degrees C to +82 Degrees C (-65 Degrees F
to+180 Degrees F) R(1994)
Adhesive, Foaming, Honeycomb,Core Splice, Structural - 54 Degrees to +177 Degrees C (-65 Degrees to
+350Degrees F) R(1994)
Sandwich Structures, GlassFabric-Resin Low Pressure Molded, Heat Resistant
Paper Honeycomb 125 lb (55 kg)Paper R(1994)
Shims, Filled Resin CompoundPrecatalyzed Sheet R(2001)
Shims, Filled Resin CompoundLiquid Precatalyzed R(2001)
Microspheres, Hollow GlassR(1994)
Moldings, Glass Fiber FilledPolytetrafluoroethylene 75 PTFE Resin, 25 Glass, as Sintered R(1994)
(R) Tape, Low Modulus Aramid300 (1334), 1000 (4448) and 8000 (13,345) Breaking Strength

Tape, Low Modulus Aramid 2(51), 300 (1334) Breaking Strength R(1994)
Tape, Low Modulus Aramid 2(51), 1000 (4448) Breaking Strength R(1994)
Tape, Low Modulus Aramid 2(51), 3000 (13,345) Breaking Strength R(1994)
Webbing, Nylon, IntegralLocking Slots
Webbing, Nylon, IntegralLocking Slots 5/8 (15.9) Wide, 1000 (4448) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 5/8 (15.9) Wide, 2000 (8896) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1 (25) Wide, 3000 (13,345) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1 (25) Wide, 4000 (17,793) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1 (25) Wide, 5000 (22,241) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1-1/16 (27) Wide, 6000 (26,689) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1-1/16 (27) Wide, 7000 (31,138) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1-1/16 (27) Wide, 8000 (35,586) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1-1/8 (29) Wide, 9000 (40,034) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1-1/8 (29) Wide, 10,000 (44,482) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1-1/8 (29) Wide, 11,000 (48,930) Breaking Strength
Webbing, Nylon, IntegralLocking Slots 1-1/8 (29) Wide, 12,000 (53,379) Breaking Strength
Webbing, Low Modulus AramidR(1998)
Webbing, Low Modulus Aramid9/16 (14) Wide, 500 (2224) Breaking Strength Herringbone Twill, Resin
TreatedR(1999)
Webbing, Low Modulus Aramid 1(25) Wide, 600 (2669) Breaking Strength Herringbone Twill R(1999)
Webbing, Low Modulus Aramid3/4 (19) Wide, 600 (2669) Breaking Strength Herringbone Twill R(1998)
Webbing, Low Modulus Aramid1-23/32 (44) Wide, 5500 (24,465) Breaking Strength Double Plain Weave
withBinder R(1998)
Webbing, Low Modulus Aramid1-23/32 (44) Wide, 3600 (16,014) Breaking Strength Herringbone Twill,
ResinTreated R(1999)

Webbing, Low Modulus Aramid3-1/32 (77) Wide, 9000 (40,034) Breaking Strength Double Plain Weave
withBinder R(1998)
Webbing, Low Modulus Aramid1-23/32 (44) Wide, 8700 (38,700) Breaking Strength Double Plain Weave
withBinder R(1998)
Webbing, Low Modulus Aramid1-23/32 (44) Wide, 1200 (5338) Breaking Strength Herringbone Twill R(1998)
Webbing, Low Modulus Aramid1-23/32 (44) Wide, 6500 (28,913) Breaking Strength Herringbone Twill
ResinTreated R(1999)
Webbing, Low Modulus Aramid 1(25) Wide, 6000 (26,689) Breaking Strength Herringbone Twill R(1998)
Webbing, Low Modulus Aramid1-3/4 (44) Wide, 10,000 (44,482) Breaking Strength Herringbone Twill
R(1998)
Webbing, Low Modulus Aramid 1(25) Wide, 9000 (40,034) Breaking Strength Special Weave R(1998)
Webbing, Low Modulus Aramid1-23/32 (44) Wide, 7300 (32,472) Breaking Strength Twill, Resin
TreatedR(1999)
Webbing, Low Modulus Aramid1-1/4 (32) Wide, 800 (3,559) Breaking Strength Herringbone Twill R(1998)
Webbing, Low Modulus Aramid 1(25) Wide, 2500 (11,121) Breaking Strength Herringbone Twill R(1998)
Webbing, Low Modulus Aramid1-1/2 (38) Wide, 1700 (7562) Breaking Strength Special Weave R(1997)
Webbing, Tubular, Low ModulusAramid-54 R(1998)
Webbing, Tubular, Low ModulusAramid 9/16 (14) Wide, 1400 (6228) Breaking Strength R(1998)
Webbing, Tubular, Low ModulusAramid 3/4 (19) Wide, 2300 (10,231) Breaking Strength R(1998)
Webbing, Tubular, Low ModulusAramid 1 (25) Wide, 4000 (17,793) Breaking Strength R(1998)
Webbing, Tubular, Low ModulusAramid 3-3/16 (81) Wide, 2250 (10,008 N) Breaking Strength R(1998)
Cloth, Parachute, Meta-Aramid,Low Modulus R(1994)
Cloth, Parachute, Meta-Aramid,Low Modulus 4.7(159) Weight, Twill R(2001)
Cloth, Parachute, Meta-Aramid,Low Modulus 6.5(220) Weight, Special Weave R(2001)
Cloth, Parachute, Meta-Aramid,Low Modulus 12.0(407) Weight, Special Weave R(2001)
Cloth, Parachute, Meta-Aramid,Low Modulus 7.0(237) Weight, Plain Weave R(2001)
Cloth, Parachute, Meta-Aramid,Low Modulus 18.0(610) Weight, Basket Weave, Resin Treated R(2001)

Tape, Adhesive, Pressure-Sensitive Masking

Rope, Aramid Fiber, Jacketedfor Antenna- Support Systems R(1993)
Rope, Aramid Fiber, JacketedCabled Strand, Extruded Jacket
Rope, Aramid Fiber, JacketedParallel Strand, Extruded Jacket
Rope, Aramid Fiber, JacketedParallel Yarn, Braided Jacket
Nylon Braid, Flat ElectricalTying Resin Coated
(R) Cloths, Cleaning forAircraft Primary and Secondary Structural Surfaces FSC 7920
Cloth, Glass Finished forResin Laminates
Cloth, Type "E"Glass, "B" Stage Polyester- Resin- Impregnated, 7781 Style Fabric,Flame Resistant R(1995)
Roving, Type "S-2"Glass Epoxy Resin Impregnated
Cloth, Type "S"Glass 181 Style Fabric, Finish No. HTS- 904
(R) Cloth, Quartz Finished forResin Laminates
Cloth, Quartz, "B"Stage Polyimide Resin Impregnated Style 581 Fabric, 315 Degrees C (599Degrees F)
Filaments, Boron TungstenSubstrate, Continuous R(1995)
Boron Filament Tape,Epoxy-Resin-Impregnated R(2001)
Boron Filament Tape,Epoxy-Resin-Impregnated Type B4.0- E374 (Type B0.102-E191) R(2001)
Boron Filament Tape,Epoxy-Resin-Impregnated Type B5.6- E374 (Type B0.142-E190) R(2001)
Boron Filament Tape,Epoxy-Resin-Impregnated Type B8.0- E374 (Type B0.203-E190) R(2001)
Boron Filament Tape,Epoxy-Resin-Impregnated Type B4.0- E180 (Type B0.102-E82) R(2001)
Boron Filament Tape,Epoxy-Resin-Impregnated Type B5.6- E180 (Type B0.142-E82) R(2001)
Boron Filament Tape,Epoxy-Resin-Impregnated Type B8.0- E180 (Type B0.203-E82) R(2001)
Graphite Yarn, Non- Structural5 Ply Yarn, 720 Filaments

Fibers, Carbon, Tow and Yarnfor Structural Composites R(1997)

Tow or Yarn, Carbon Fibers forStructural Composites GF 400 (2758) Tensile Strength, 33 (228)
TensileModulus R(1997)
Tow or Yarn, Carbon Fibers forStructural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile
ModulusR(1997)
Tow or Yarn, Carbon Fibers forStructural Composites GF 400 (2758) Tensile Strength, 40 (276)
TensileModulus R(1997)
Tow or Yarn, Carbon Fibers forStructural Composites GF 300 (2068) Tensile Strength, 75 (517)
TensileModulus R(1997)
Tow or Yarn, Carbon Fibers forStructural Composites GF 220 (1517) Tensile Strength, 75 (517)
TensileModulus R(1997)
Tow or Yarn, Carbon Fibers forStructural Composites GF 325 (2241) Tensile Strength, 57 (393)
TensileModulus R(1997)
Tow or Yarn, Carbon Fibers forStructural Composites GF (OX) 400 (2758) Tensile Strength, 33 (228)
TensileModulus R(1997)
Tow or Yarn, Carbon Fibers forStructural Composites GF (OX) 400 (2758) Tensile Strength, 40 (276)
TensileModulus R(1997)
Tow, Carbon Fiber forStructural Composites 500 (3447) Tensile Strength, 32 (221) Tensile ModulusR(1997)
Tow, Carbon Fiber forStructural Composites 550 (3792) Tensile Strength, 38 (262) Tensile ModulusR(1997)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186)
Modulus,175 (347) R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138)
Modulus,175 (347) R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131)
Modulus,80 (176) R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus,
80(176) R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus,
80(176) R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus,
80(176) R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus,
175(347) R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 210,000 (1448) Tensile, 20,000,000 (138)
Modulus,175 (347) R(1994)
Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 200,000 (1379) Tensile, 18,000,000 (124)
Modulus,80 (176) R(1994)
Interleaf Carrier Material,Composite Tape or Broadgoods Paper, 0.004 Inch (0.10 mm), Perforated

Interleaf Carrier Material,Composite Tape Parchment, 0.004 in. (0.10 mm), Unperforated
Interleaf Carrier Material,Composite Tape Polyethylene Film, Unperforated 0.0018 in. (0.046 mm)
Interleaf Carrier Material,Composite Tape Polyethylene Coated Paper, Unperforated 0.0035 inch (0.089 mm)
Interleaf Carrier Material,Composite Tape Paper, 0.004 inch (0.10 mm), Perforated
Interleaf Carrier Material,Composite Tape Polyethylene Coated Paper, Perforated 0.0035 inch (0.089 mm)
Organic Fiber (Para-Aramid),Yarn and Roving, High Modulus
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/22.5 Tensile Strength, 18(124)/1010
Tensile Modulus 195 (215 d tex) Denier, 0.6% Finish
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 17.5(121)/950
Tensile Modulus 380 Denier, (420 d tex), 0.6% Finish
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 16.5(114)/900
Tensile Modulus 1140 Denier (1270 d tex), 0.6% Finish
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 16.5(114)/955
Tensile Modulus 1420 Denier (1580 d tex), 0.6% Finish
(R) Roving, Organic Fiber(Para-Aramid), High Modulus OR 450 (3103)/22.5 Tensile Strength, 17.5(121)/865
Tensile Modulus 7100 Denier, (7900 d tex), 0.6% Finish
(R) Roving, Organic Fiber (Para-Aramid),High Modulus OR 500 (3447)/23.5 Tensile Strength, 17.5 (121)/890
TensileModulus 4560 Denier, (5070 d tex), 0.6% Finish
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/20.9 Tensile Strength, 16.5(114)/895
Tensile Modulus 2160 Denier, (2400 d tex), 0.6% Finish
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/22.6 Tensile Strength, 18(124)/1005
Tensile Modulus 195 Denier (215 d tex), 1.2% Finish
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 17.5(121)/970
Tensile Modulus 380 Denier (420 d tex), 1.2% Finish
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 16.5(114)/945
Tensile Modulus 1140 Denier (1270 d tex), 1.2% Finish
(R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 16.5(114)/950
Tensile Modulus 1420 (1580 d tex) Denier, 1.2% Finish
(R) Yarn, Organic Fiber (Para-Aramid),High Modulus OY 390 (2689)/21.1 Tensile Strength, 16.5 (114)/900
TensileModulus 2160 (2400 d tex) Denier, 1.2% Finish
Cloth, Organic Fiber(Para-Aramid), High Modulus for Structural Composites
Cloth, Organic Fiber(Para-Aramid), High Modulus Epoxy Resin Impregnated R(1994)
Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 120, 175 (350) R(1994)
Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 181, 175 (350) R(1994)

Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 281, 175 (350) R(1994)
Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 328, 175 (350) R(1994)
Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 120, 80 (180) R(1994)
Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 181, 80 (180) R(1994)
Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 281, 80 (180) R(1994)
Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 328, 80 (180) R(1994)
Glass Tape and Flat Sheet,Non-Woven Cloth Epoxy Resin Impregnated, for Hand and Machine Layup R(1997)
Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 120(248) R(1997)
Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III36 -120 (248) R(1997)
Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-26 150(302) R(1997)
Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III26 -150 (302) R(1997)
Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 150(302) R(1997)
Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 95(203) R(1997)
Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III33 - 95(203) R(1997)
Radomes, Foam SandwichPolyimide/Quartz Cloth Construction R(1994)
Aluminum Alloy, Sheet andPlate 0.12 Cu (1100-H14) Strain Hardened (UNS A91100)
Selection and Application ofRelays for Proper Performance
Aluminum Alloy Foil 1.0Mg -0.6Si - 0.30Cu - 0.20Cr (6061-0) Annealed R(1995)
Ring, Retaining - External,Spiral Wound, Heavy & Medium Duty CRES, Metric R(1991)
Ring, Retaining - Internal,Spiral Wound, Heavy & Medium Duty CRES, Metric R(1991)
Pin, Straight, Headless AMS5688, Metric R(1991)
Pin, Straight, Headless AMS5732, Metric R(1991)
Ring, Retaining - External,Tapered, Type I, Class 2 AMS 5520, Metric R(1991)
Aluminum Alloy, Alclad Sheetand Plate, 1.0Mg - 60Si - 0.28Cu - 0.20Cr (Alclad 6061-0) Annealed
(UNSA86061)
Ring, Retaining - Internal,Tapered, Type I, Class 1 AMS 5520, Metric R(1991)

Aluminum Alloy, Sheet andPlate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061 -T4 Sheet, -T451 Plate)Solution
Heat Treated and Naturally Aged
Aluminum Alloy Sheet and Plate(2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
UNSA92014
Ring, Retaining - Internal,Beveled, Tapered, Type II Class 1 AMS 5520, Metric R(1991)
Ring, Retaining - External,Reinforced E-Ring, Type I Class 3 AMS 5520, Metric R(1991)
Rings, Retaining - SpiralWound, Uniform Section Corrosion Resistant, Procurement Specification for,Metric
FSC 5365 R(2000)
Aluminum Alloy Sheet andPlate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn Alclad One Side 2024 and 11/2%Alclad One Side 2024-T3 Sheet 1-1/2% Alclad One Side 2024- T351
Rings, Retaining - TaperedWidth, Uniform Thickness Corrosion Resistant, Procurement Specification
for,Metric FSC 5365 R(2000)
Washer, Key - 90 DegreeLocking, Cres, UNS S32100, Metric
Washer, Key - 180 DegreeLocking, Cres, UNS S32100, Metric
Washer, Key - 270 DegreeLocking, Cres, UNS S32100, Metric
Washer, Key - Dual LockingPositions, Cres, UNS S32100, Metric
Nut, Spanner - End Slots,Cupwasher Locked, UNS S66286, Silver Plated, MJ Thread, Metric
Washer, Cup, Lock - SpannerNut AMS 5646, Metric FSC 5310
Aluminum Alloy, Sheet andPlate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651Plate)
Solution and Precipitation Heat Treated UNS A97075
(R) Aluminum Alloy, Plate6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated,
StressRelieved, and Overaged UNS A97050
Aerospace Fluid Power -Cleanliness Classification for Hydraulic Fluids
Aluminum Alloy, Drawn, RoundSeamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti - (2219T8511)Solution Heat Treated, Stress Relieved by Stretching, and Precipi
Sealing Integral Fuel Tanks
Pins, Procurement Specificationfor, Metric FSC 5315 R(2000)
Aluminum Alloy, Drawn, Round,Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-0) Annealed (UNS
A95052)
Aluminum Alloy Tubing,Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061T4)Solution Heat Treated and Naturally Aged UNS A96061
Aluminum Alloy, Seamless DrawnTubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and
PrecipitationHeat Treated
Aluminum Alloy Tubing,Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061T6)Solution and Precipitation Heat Treated Ref. UNS 96061
Aluminum Alloy Sheet 5.7Zn -2.2Mg - 1.6Cu - 0.22Cr (7475-T61) Solution and Precipitation Heat
TreatedR(1995)

Aluminum Alloy Sheet 5.7Zn -2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
R(1995)
Aluminum Alloy, Plate 1.6Cu -2.2Mg - 0.22Cr - 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved
byStretching, and Precipitation Heat Treated UNS A97475
Aluminum Alloy, Plate 5.7Zn -2.2Mg - 1.6Cu - 0.22Cr (7475-T651) Solution Heat Treated, Stress Relieved,and
Precipitation Heat Treated UNS A97475
Adapter, Assembly - PortConnection Ring Locked to Flareless Tube End FSC 4730
Aluminum Alloy Alclad Sheet5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (ALClad 7475-T761) Solution and
PrecipitationHeat Treated UNS A87475
Aluminum Alloy Die Forgings(7050-T74) Solution Heat Treated and Overaged UNS A97050
Aluminum Alloy, Hand Forgings6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat
Treated,Compression Stress-Relieved, and Overaged (UNS A97050)
Aluminum Alloy Forgings 7.7Zn- 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat
Treated(UNS A97049) R(1995)
Aluminum Alloy, Rolled or ColdFinished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution
HeatTreated and Naturally Aged (T4) Solution Heat Treated, Cold W
Aluminum Alloy Bars, Rods, andWire, Rolled or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014T6)Solution and Precipitation Heat Treated UNS A92014
Aluminum Alloy, Die and HandForgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6)
Solutionand Precipitation Heat Treated (UNS A97075) (Supersedes AMS 4
Aluminum Alloy, Forgings andRolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated
UNSA96061
Aluminum Alloy Die Forgings4.4Cu - 0.85Si - 0.80Mn (2025-T6) Solution and Precipitation Heat Treated
UNSA 92025
Aluminum Alloy Die and HandForgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni
-0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treat
Aluminum Alloy Forgings andRolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution
andPrecipitation Heat Treated UNS A92014
Aluminum Alloy, Die Forgings4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat Treated UNS
A9201401 1997
Aluminum Alloy Die Forgings5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation
HeatTreated
Aluminum Alloy Forgings andRolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219T6)Solution and Precipitation Heat Treated R(1995)
Aluminum Alloy, Hand Forgingsand Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219T852/T851)Solution Heat Treated, Mechanically Stress Relieved, and Prec
Aluminum Alloy Forgings andRolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4)
SolutionHeat Treated and Naturally Aged R(1995)
Aluminum Alloy Forgings 5.6Zn- 2.5Mg - 1.6Cu - 0.23Cr(7075-T7352) Solution Heat Treated, Stress
Relievedby Compression, and Overaged UNS A97075 R(2000)
Bolt, Spline Drive ExtendedWasher, Reduced Shank, AMS 5662, Metric

Aluminum Alloy Die Forgings(7175-T66) Solution and Precipitation Heat Treated UNS A97175
Aluminum Alloy, Die and HandForgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and
PrecipitationHeat Treated UNS A97175
Clamp, Loop-Cushioned,Integral Lock R(1993)
Aluminum Alloy Extrusions7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated,
StressRelieved, and Overaged (UNS A97049)
Aluminum Alloy, Extrusions7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511) Solution Heat Treated,
StressRelieved, and Overaged UNS A97049
Aluminum Alloy, Extrusions6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated,Stress
Relief Stretched, Straightened, and Precipitation Heat Treat
Aluminum Alloy, Extrusions6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat
Treated,Stress-Relieved by Stretching, and Straightened UNS A92219
(R) Aluminum Alloy, Extrusions5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511) Solution Heat Treated,
StressRelieved by Stretching, and Overaged (UNS A97075)
Wrenches; Flare Nut, Crowfoot,12-Point Nondistorting R(1999)
Aluminum Alloy, Flash WeldedRings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and
PrecipitationHeat Treated (UNS A97075)
Nut, Self Locking - HexExtended Washer UNS N07001, Silver Plate, MJ THD, Metric
Aluminum Alloy Forgings 5.6Zn- 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress
Relieved,and Precipitation Heat Treated UNS A97175 R(2000)
Filler Metal, Aluminum Brazing10Si - 4.0Cu (4145)
Filler Metal, Aluminum Brazing12Si (4047)
Aluminum Alloy Bars, Rods, andWire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F)
asFabricated R(1994)
Bolt, Machine, Spline Drive,Special Extended Washer, Reduced Head, PD Shank, AMS 5662, Metric
Screw, Machine, 100 DegreeCSK, Flat Head, Offset Cruciform Recess, Full Shank, UNS S66286, MJ
Thread,Metric
Aluminum Alloy Welding Wire5.2Si (4043) (UNS A94043)
Sheet and Strip Surface FinishNomenclature R(1995)
Aluminum Alloy Plate 7.7Zn -2.4Mg - 1.6Cu - 0.16Cr (7049-T7351) Solution Heat Treated, Stress
Relieved,and Precipitation Heat Treated R(1995)
Aluminum Alloy Plate 6.2Zn -2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress
Relieved,and Overaged UNS A97050
Aluminum Alloy Plate 5.7Zn -2.2Mg - 1.6Cu - 0.22Cr (7475-T7351) Solution Heat Treated, Stress Relieved
byStretching, and Precipitation Heat Treated R(1994)
Aluminum Alloy, Plate 6.2Zn -1.8Cu - 2.4Mg - 0.13Zr (7010-T7651) Solution Heat Treated, Stress
Relieved,and Precipitation Heat Treated
Aluminum Alloy, Plate 6.2Zn -1.8Cu - 2.4Mg - 0.13Zr (7010-T73651) or (7010-T7451) Solution Heat
Treated,Stress Relieved, and Precipitation Heat Treated

Aluminum Alloy Sheet, Alclad5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475- T61) Solution and Precipitation
HeatTreated (UNS A87475) R(1994)
(R) Aluminum Alloy, Castings5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated(UNS
A03550)
Aluminum Alloy, Welding Wire4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201) (UNS A02010)
Aluminum Alloy Castings, 4.6Cu- 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71) Solution and Precipitation
HeatTreated UNS A12060 R(2000)
Aluminum Alloy Castings 4.6Cu- 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and
NaturallyAged UNS A12060 R(2000)
(R) Aluminum Alloy, WeldingWire 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti for Welding A206.0 Type Alloys
Aluminum Alloy, Welding Wire5.0Si - 1.2Cu - 0.50Mg (355) (UNS A03550)
Aluminum Alloy, Welding Wire7.0Si - 0.52Mg (357) (UNS A03570)
Aluminum Alloy, Hand Forgings7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049- T7352) Solution Heat Treated,
StressRelieved by Compression, and Precipitation Heat Treated (UNS
Aluminum Alloy Hand Forgingsand Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061- T652) Solution
HeatTreated, Stress Relief Compressed, and Precipitation Heat Tr
Aluminum Alloy, Sheet 2.4Li -1.3Cu - 0.95Mg - 0.10Zr (8090-T6) Solution and Precipitation Heat
Treated(Unrecrystallized)
(R) Aluminum Alloy Castings,Investment 7.0Si - 0.32Mg (356.0-T51) Precipitation Heat Treated UNS A03560
Aluminum Alloy, Alclad FlatSheet 4.1Cu - 1.4Mg - 0.45Mn (Alclad 2424-T3) Solution Heat Treated and
ColdWorked UNS A82424
Jet Reference Fluid Study forFuel Tank Sealants
(R) Aluminum Alloy Castings,Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0- T6) Solution and
PrecipitationHeat Treated UNS A03550
Handles and Attachments forHand Socket Wrenches
Rings, Retaining - SpiralWound, Uniform Section Corrosion and Heat Resistant, UNS S66286 FSC 5365
Boron-Aluminum Composite Sheet50 v/o 5.6B, 6061-0, for Diffusion Bonding R(1994)
Aluminum Alloy, Sheet 8.6Fe -1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened
(UNSA98009)
Aluminum Alloy Extrusions8.6Fe - 1.8Si - 1.3V (8009- H112) Powder Metallurgy Product, StrainHardened(UNS A98009)
Aluminum Alloy, Rolled orForged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652)
SolutionHeat Treated, Mechanically Stress Relieved, and Precipitation He
Aluminum Alloy, Rolled orForged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352)
SolutionHeat Treated, Mechanically Stress Relieved, and Precipitation

Aluminum Alloy, Rolled orForged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652)
SolutionHeat Treated, Mechanically Stress Relieved, and Precipitation
Aluminum Alloy Rings, Rolledor Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652)
SolutionHeat Treated, Mechanically Stress Relieved, and Precipitation
Aluminum Alloy Forgings 7.7Zn- 2.5Mg - 1.5Cu - 0.16Cr (7149-T73) Solution and Precipitation Heat
TreatedR(1994)
Aluminum Alloy Forgings 7.7Zn- 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed
Tubing, Flared, StandardDimensions for, Design Standard
Aluminum Alloy, Forgings 7.8Zn- 2.2Mg - 1.6Cu - 0.15Cr (7249-T74 and -T7452)
Aluminum Alloy, Extrusions6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated,
StressRelieved, Straightened, and Overaged UNS A97050
Aluminum Alloy, Extrusions6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated,
StressRelieved by Stretching, Straightened, and Overaged UNS A97050
Aluminum Alloy, Extrusions6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated,
StressRelieved, Straightened, and Overaged UNS A97050
Aluminum Alloy, Extrusions7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated,
StressRelieved by Stretching, and Overaged (UNS A97149)
Grease, Pneumatic System FSC9150; Should Be Used Instead of MIL-G-4343C, Which Was Cancelled on
10September 1999
Metric Wrenches; NondistortingFlare Nut R(1999)
Nut, Fitting, Retained
Sheet and Plate, MagnesiumAlloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized
(UNSM11311) R(1995)
Plate, Magnesium Alloy 3.0Al -1.0Zn - 0.20Mn (AZ31B- H26) Cold Rolled and Partially Annealed R(1995)
Sheet and Plate, MagnesiumAlloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B- H24) Cold Rolled, Partially
AnnealedR(1995)
Sealing Compound, Topcoat,Fuel Tank, Buna-N Type FSC 8030
Nut - Self-Locking Clinch, SerratedShank, Hole Preparation, Installation and Removal Procedures
Nut, Self-Locking, UNS S66286,1200 Degrees F, 160 000 psi, UNJ Thread FSC 5310
Magnesium Alloy Welding Wire9.0Al - 2.0Zn (AZ92A) UNS M11922
Fitting End, Flared TubeConnection, Design Standard
Fitting End, Bulkhead, FlaredTube Connection, Design Standard
Nuts, Self-Locking, Alloy,Corrosion and Heat Resistant High Strength, All Metal, Dry Film Lubricated,1400
Degree F (760 Degree C), Procurement Specification

Magnesium Alloy, Sand Castings2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat
Treated(UNS M18220)
Magnesium Alloy, InvestmentCastings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation
HeatTreated (UNS M11914)
Magnesium Alloy, InvestmentCastings 9.0Al - 2.0Zn (AZ92A-T 6) Solution and Precipitation Heat
Treated(UNS M11920)
Magnesium Alloy, InvestmentCastings 10Al (AM100A-T6) Solution and Precipitation Heat Treated
(UNSM10100)
Barkhausen Noise Inspectionfor Detecting Grinding Burns in High Strength Steel Parts R(1996)
Magnesium Alloy Castings,Permanent Mold 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation HeatTreated
Copper, Sheet, Strip, andPlate Soft Annealed UNS C11000
Copper Alloy (Brass), Sheet,Strip, and Plate 70Cu - 30Zn Annealed (061) (UNS C26000)
Bolts and Screws, Steel, UNSS66286 Tensile Strength 160 ksi, Procurement Specification FSC 5306
Copper Alloy (Brass), Sheet,Strip, and Plate 70Cu - 30Zn Half Hard (H02) (UNS C26000)
Socket Wrenches, Hand (Metric)R(1999)
Copper-Beryllium Alloy,Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated
(TF00,Formerly AT) (UNS C17200)
Silicon Bronze Bars, Rods,Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved R(1994)
Aluminum Bronze, Bars, Rods,Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and
StressRelieved (HR50) or Temper Annealed (TQ50) (UNS C63000)
Copper-Beryllium Alloy, Barsand Rods 98Cu - 1.9Be (CDA 172) Hard Temper UNS C17200
Nut, Retained, Short FlarelessFSC 4730 R(2000)
Pi-Bus
Aerospace Standard, GlandDesign, O-Ring and Other Elastomeric Seals
Solder, Tin-Lead 45Sn - 55Pb
Copper Alloy, Brazing Filler Metal52.5Cu - 38Mn - 9.5Ni 1615 to 1700 Degrees F (879 to 927 Degrees
C)Solidus-Liquidus Range UNS C69950
Silver Alloy, Brazing FillerMetal 56Ag - 42Cu - 2.0Ni 1420 to 1640 Degrees F (771 to 893 Degrees C)SolidusLiquidus Range UNS P07560
Silver Alloy, Brazing FillerMetal 85Ag - 15Mn 1760 Degrees to 1780 Degrees F (960 Degrees to 971
DegreesC) Solidus-Liquidus Range UNS P07850
Silver Alloy, Brazing FillerMetal 92.5Ag - 7.2Cu - 0.22Li 1435 to 1635 Degrees F (779 to 891 Degrees
C)Solidus-Liquidus Range UNS P07925

Silver Alloy Brazing FillerMetal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 Degrees F (627 to 635Degrees
C) Solidus-Liquidus Range UNS P07500
Silver Alloy, Brazing FillerMetal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 Degrees F (632 to688
Degrees C) Solidus-Liquidus Range UNS P07501
Silver Alloy, Brazing FillerMetal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 Degrees F (718 to 857 Degrees
C)Solidus-Liquidus Range UNS P07540
Silver Alloy, Brazing FillerMetal 60Ag - 30Cu - 10Sn 1115 to 1325 Degrees F (602 to 718 Degrees C)SolidusLiquidus Range UNS P07600
Silver Alloy Brazing FillerMetal 63Ag - 28.5Cu - 6.0Sn - 2.5Ni 1275 to 1475 Degrees F (691 to 802Degrees C)
Solidus-Liquidus Range UNS P07630
Nickel Alloy, Brazing FillerMetal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 to 1970 Degrees F (977to
1077 Degrees C) Solidus-Liquidus Range UNS N99600 R(2000)
Nickel Alloy, Brazing FillerMetal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 to 1970 Degrees
F(977 to 1077 Degrees C) Solidus-Liquidus Range UNS N99610 R(
Nickel Alloy, Brazing FillerMetal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 Degrees F (971 to
999Degrees C) Solidus-Liquidus Range UNS N99620 R(2000)
Nickel Alloy, Brazing FillerMetal 92Ni - 4.5Si - 3.1B 1800 to 1900 Degrees F Solidus-Liquidus Range
(UNSN99630)
Nickel Alloy, Brazing FillerMetal 94Ni - 3.5Si - 1.8B 1800 to 1950 Degrees F (982 to 1066 Degrees C)SolidusLiquidus Range (UNS N99640)
Manganese Alloy, BrazingFiller Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 Degrees F (966 to
1024Degrees C) Solidus-Liquidus Range UNS M26800
Nickel Alloy, Brazing FillerMetal 71Ni - 10Si - 19Cr 1975 to 2075 Degrees F (1080 to 1135 Degrees
C)Solidus-Liquidus Range (UNS N99650)
Cobalt Alloy, High TemperatureBrazing Filler Metal 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 to
2100Degrees F (1121 to 1149 Degrees C) Solidus- Liquidus Range
Gold-Palladium-Nickel Alloy,Brazing Filler Metal, High Temperature 50Au - 25Pd - 25Ni 2015 to 2050
DegreesF (1102 to 1121 Degrees C) Solidus-Liquidus Range UNS P005
Gold-Palladium-Nickel AlloyBrazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130Degrees
F (1135 to 1166 Degrees C) Solidus-Liquidus Range
Gold-Palladium-Nickel Alloy,Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to
1915Degrees F (1007 to 1046 Degrees C) Solidus-Liquidus Range UNS P00
Gold-Nickel Alloy, BrazingFiller Metal, High Temperature 82Au - 18Ni 1740 Degrees F (949 Degrees
C)Solidus-Liquidus Temperature UNS P00820
Bearings, Babbitt 91Sn - 4.5Sb- 4.5Cu (UNS L13910)
Bearings, Sintered MetalPowder 89Cu - 10Sn Oil Impregnated
Bearings, Leaded Copper 70Cu -28.5Pb Steel Back UNS C98400 R(1994)
Bearings, Leaded Bronze 80Cu -10Pb - 10Sn Steel Back R(1994)
Fittings, 37 Degree Flared,Fluid Connection, Standard 05 1995

Castings, Leaded Bronze, Sandand Centrifugal 80Cu - 10Sn - 9.5Pb as Cast (UNS C93700) R(1994)
Fittings and Bosses, PipeThreaded, Fluid Connection, Standard 05-1995
Fittings, 37 Degree Flared toPipe Threaded, Fluid Connection,Standard 05 1995
Fittings, Beaded, FluidConnection, Standard 05 1995
Fittings, Beaded to 37 DegreeFlared, Fluid Connection, Standard 05 1995
Fittings, Beaded to PipeThreaded, Fluid Connection, Standard 05 1995
Flaring (Swaging) and Removalof Shank Nuts
Leaded Red Brass, Sand andCentrifugal Castings 85Cu - 5.0Sn - 5.0Pb - 5.0Zn as Cast UNS C83600
Elbow, 45 Degree, Pipe,Internal and External Thread FSC 4730; Should Be Used Instead of AN915 REV11,
Which Was Cancelled 8 February 1999
Tee, Pipe, Internal Thread FSC4730; Should Be Used Instead of AN917 REV 8, Which Was Cancelled 8
February1999
Cross, Pipe, Internal ThreadFSC 4730; Should Be Used Instead of AN918 REV 8, Which Was Cancelled on
8February 1999
Coupling, Pipe, InternalThread FSC 4730; Should Be Used Instead of AN910 REV 10, Which Was Cancelled8
February 1999
Manganese Bronze, Sand andCentrifugal Castings 58Cu - 39Zn - 1.2Fe - 1.0Al - 0.80Mn as Cast UNS C86500
Nipple, Pipe, External ThreadFSC 4730; Should Be Used Instead of AN911 REV 9, Which Was Cancelled on
8February 1999
Bushing, Pipe, Internal andExternal Thread FSC 4730; Should Be Used Instead of AN912 REV 9, Which
WasCancelled on 8 February 1999
Manganese Bronze, Sand andCentrifugal Castings 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe High Strength, asCast
UNS C86300
Plug, Pipe, External ThreadFSC 4730; Should Be Used Instead of MS20913G, Which Was Cancelled on
28September 1999
Fittings, Straight ThreadedBoss or Flanged, Fluid Connection, Standard 05 1995
Fittings, Straight Thread Bossor Flanged to 37 Degree Flared, Fluid Connection, Standard 05 1995
Fittings, Flanged to Beaded,Fluid Connection, Standard 05 1995
Bolts and Screws, Nickel AlloyUNS N07718, Classification: 185 ksi/1200 Degrees F Procurement
Specification,Standard FSC 5306 REV 09 1996
Aluminum Bronze Alloy,Centrifugal and Continuous-Cast Castings 81.5Cu - 10.3Al - 5.0Ni - 2.8FeQuench
Hardened and Temper Annealed (UNS C95510)
Copper-Beryllium AlloyCastings 97Cu - 2.1Be - 0.52Co - 0.28Si Solution Heat Treated (TB00) (UNSC82500)

Alloy Castings, Corrosion andHeat Resistant 66Ni - 29Cu - 4.0Si as Cast UNS N04019
Titanium Alloy, Sheet, Strip,and Plate 6Al - 4V Annealed (UNS R56400)
Titanium Bars, Wire, Forgings,and Rings Commercially Pure 70.0 ksi (483 MPa) Yield Strength R(1995)
Titanium Alloy, Seamless,Hydraulic Tubing 15V - 3.0Cr - 3.0Al - 3.0Sn Cold Worked and PrecipitationHeat
Treated
Titanium Alloy, Bars, Wire,and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength (UNS R54520)
Titanium Alloy Bars, Wire,Forgings, Rings, and Drawn Shapes 6AI - 4V Annealed UNS R56400
Titanium Alloy Bars, Forgings,and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed,
FractureToughness (UNS R56400)
Titanium Alloy Extrusions andFlash Welded Rings 6Al - 4V Annealed Beta Processed R(1994)
Titanium Tubing, WeldedAnnealed, 40,000 psi (276 MPa) Yield Strength R(1994)
Titanium Tubing, Seamless Annealed,40,000 psi (275 MPa) Yield Strength UNS R50400
Titanium Alloy, Hydraulic,Seamless Tubing 3.0Al - 2.5V Annealed (UNS R56320)
Titanium Welding WireCommercially Pure Environment Controlled Packaging R(1994)
Titanium Alloy Welding Wire6Al - 4V, Extra Low Interstitial Environment Controlled Packaging R(1994)
(R) Titanium Alloy, Round Barand Wire 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution
HeatTreated and Cold Drawn (UNS R58640)
Titanium Alloy Wire 13.5V -11Cr - 3A1 Spring Temper (UNS R58010)
Titanium Alloy, Bars, Wire,Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified
Strength(UNS R56400)
Titanium Alloy, Bars, Wire,Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400)
Titanium Alloy, Forgings 5AI -2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength UNS R54520
Titanium Alloy Bars, Wire, andForgings 7A1 - 4Mo Solution and Precipitation Heat Treated (UNS
R56740)R(1994)
Titanium Alloy, Bars, Wire,Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable (UNS R56620)
Titanium Alloy Bars, Wire, andRings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized R(1994)
Titanium Alloy, Bars, Wire,and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and PrecipitationHeat
Treated (UNS R54620)

Titanium Alloy, Forgings 6.0A1- 2.0Sn - 4.0Zr - 2.0Mo Solution and Precipitation Heat Treated (UNS R54620)
Titanium Alloy Bars, Wire,Forgings, and Rings 6A1 - 6V - 2Sn Annealed (UNS R56620)
Titanium Alloy, Bars, Wire,Forgings, and Rings 6AI, 6V - 2Sn Solution and Precipitation Heat Treated
UNSR56620
Titanium Alloy Bars, Wire, andForgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation HeatTreated
R(1994)
Titanium Alloy Wire 44.5 Cb(UNS R58450)
Titanium Alloy, Forgings 10V -2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated
andAged 180 ksi (1241 MPa) Tensile Strength
Spring Pins, Tubular, CoiledCorrosion Resistant Nickel Base Alloy, Procurement Specification for (FSC5315)
Titanium Alloy Forgings 10V -2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173
ksi(1193 MPa) Tensile Strength
Steel,Chrome-Nickel-Molybdenum (E4340) Bars and Reforging Stock
Rubber Cellular Sheet, Moldedand Hand-Built Shapes; Latex Foam Should Be Used Instead of MIL-R-5001,
WhichWas Cancelled on December 18, 1998
Air Filling Valves
Steel Bars, Forgings, andTubing, Free-Cutting 1.5Mn - 0.25Pb (0.32 - 0.39C) (11L37) (UNS G11374)
Steel Bars, Forgings, andTubing, Free Cutting 0.14 - 0.20C (SAE 1117) UNS G11170
Steel, Bars, Forgings, andTubing, Free-Cutting 1.5Mn (0.32 - 0.39C) (SAE 1137) UNS G11370
(R) Steel, Welding Wire 1.05Cr- 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C) Vacuum Melted, EnvironmentControlled Packaging (UNS K22925)
(R) Steel, Welding Wire 1.05Cr- 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) Vacuum Melted, EnvironmentControlled Packaging UNS K23725
(R) Steel, Welding Wire 0.06Carbon, Maximum, Specification UNS K00606 11 1996
Steel Sheet and Strip,Aluminum Coated Low Carbon R(1994)
Steel, Sheet and Strip 0.15Carbon, Maximum Deep Forming Grade UNS G10100
Steel, Sheet and Strip 0.15Carbon, Maximum Forming Grade (UNS G10100)
Steel, Sheet and Strip 0.15Carbon, Maximum Half Hard Temper (UNS G10100)
Steel, Sheet and Strip 0.25Carbon, Maximum Hard Temper (UNS G10200)

Steel Tubing, Seamless 0.15Carbon, Maximum Annealed

Steel Tubing, Welded 0.13Carbon, Maximum Annealed R(1994)
Steel, Bars, Forgings, andTubing 0.13 - 0.18C SAE 1015; UNS G10150
Steel, Low Carbon, Bars andWire 0.08 to 0.20 C (UNS K00802)
Steel, Low Carbon Bars,Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (UNS K02508)
Tubing, Carbon Steel (1025),(Aircraft Quality)
Steel Tubing, Seamless 0.22 -0.28C (SAE 1025) Cold Drawn and Stress Relieved (UNS G10250) R(1994)
Steel Tubing, Welded (0.22 -0.28C) (SAE 1025) Normalized or Stress Relieved R(1994)
Steel Bars, Forgings, andTubing 0.31 - 0.38C (SAE 1035) R(1994)
Steel Sheet, Strip, and Plate0.47 - 0.55C (SAE 1050) Annealed UNS G10500
Carbon Steel, Wire 0.75 -0.88C (SAE 1080) Spring Temper, Cold Drawn (UNS G10800)
Steel Strip 0.68 - 0.80C (SAE1074) R(1994)
Sheet and Strip, Steel (0.90 -1.04C) (SAE 1095) UNS G10950 R(1999)
Steel Strip (0.90 - 1.04C)(SAE 1095) Hard Temper UNS G10950 R(1999)
Tube End - Beaded, DesignStandard FSC 4730; Should Be Used Instead of MS33660D, Which Was Cancelled
10May 2000
Steel, Bars 0.90 - 1.30C
Fitting End - Hose Connection,Design Standard FSC 4730; Should Be Used Instead of MS33658A, Which
WasCancelled on 20 July 1999
Desiccant Port and DesiccantHolder
Fitting, Bolt, Flared FSC4730; Should Be Used Instead of AN774 REV 7, Which Was Cancelled on
28September 1999
(R) Fitting, Bolt, FluidPassage FSC 4730; Should Be Used Instead of AN775 REV 13, Which Was Cancelledon
28 September 1999
Fitting, Connector, MultipleFluid Pressure Line, 45 Degree FSC 4730
Fitting, Connector, MultipleFluid Pressure Line, Tee FSC 4730
Fitting, Plug, Tube End,Flared FSC 4730; Should Be Used Instead of the Following Two Flared
FittingStandards, Which Were Cancelled on 28 September 1999: AN806 REV 7

Fitting, Port Plug and BleederFSC 4730; Should Be Used Instead of the Following Two Flared
FittingsStandards, Which Were Cancelled on 28 September 1999: AN814 REV 1
Fitting, Adapter, Port,Reducer FSC 4730; Should Be Used Instead of AN893 and MS24397, Which
WasCancelled on 26 May 2000; SAE 5202, Reference within SAE AS 5172, Has
Fitting, Bushing, Port,Reducer FSC 4730; Should Be Used Instead of AN894 and MS 24398, Which
WasCancelled on 26 May 2000; SAE AS 5202, Referenced within SAE AS 5173
Fitting, Union and Reducer,Flared FSC 4730; Should Be Used Instead of the Following Four Flared
FittingStandards, Which Were Cancelled on 28 September 1999: AN815 R
Fitting, Sleeve, Flared FSC4730; Should Be Used Instead of MS20819G, Which Was Cancelled on 28
September1999
Nut, Fitting, Bulkhead FSC4730; Should Be Used Instead of AN924 REV 11, Which Was Cancelled on 16
March2000
Nut, Fitting, Port FSC 4730;Should Be Used Instead of AN6289 REV 7, Which Was Cancelled on 28
September1999
Fitting, Adapter, Bulkhead,Flared to Hose FSC 4730; Should Be Used Instead of AN807 REV 6, Which
WasCancelled on 28 September 1999
Fitting, Elbow, 90 Degree,Bulkhead, Flared to Hose FSC 4730; Should Be Used Instead of AN838, Rev
8,Which Was Cancelled on 20 July 2000
Fitting, Elbow, 45 Degree,Bulkhead, Flared to Hose FSC 4730; Should Be Used Instead of AN839, Rev
7,Which Was Cancelled on 20 July 2000
Fitting, Adapter, Hose toStraight Pipe FSC 4730; Should Be Used Instead of AN840 REV 9, Which
WasCancelled on 28 September 1999
Fitting, Adapter, Flared toHose FSC 4730; Should Be Used Instead of AN841 REV 5, Which Was Cancelled
on28 September 1999
Fitting, Elbow, 90 Degree,Pipe to Hose FSC 4730; Should Be Used Instead of AN842, Rev 11, Which
WasCancelled on 20 July 2000
Fitting, Elbow, 45 Degree,Pipe to Hose FSC 4730; Should Be Used Instead of AN844, Rev 11, Which
WasCancelled on 20 July 2000
Fitting, Elbow, 45 Degree,Bulkhead, Hose FSC 4730; Should Be Used Instead of AN846, Rev 7, Which
WasCancelled on 20 July 2000
Fitting, Elbow, 90 Degree,Bulkhead, Hose FSC 4730; Should Be Used Instead of AN848, Rev 11, Which
WasCancelled on 20 July 2000
Fitting, Adapter, Hose FSC4730; Should Be Used Instead of AN849 REV 11, Which Was Cancelled on
28September 1999
(R) Fitting, Adapter, StraightPipe to Flared FSC 4730; Should Be Used Instead of AN816 REV 13, Which
WasCancelled on 19 May 2000
Fitting End, External TaperPipe Thread, Design Standard FSC 4730
Iron-Nickel Alloy, Strip 49Fe- 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10%Reduction
(UNS N09902)
Iron-Nickel Alloy Strip 49Fe -5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 50%Reduction
UN N09902 R(1994)
Insulating Components, Molded,Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing
StrainRelief, General Specification for

Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight ShouldBe
Used in Place of MS3109, Dash Numbers 11 Through 18, W
Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right
AngleShould Be Used in Place of MS3117, Dash Number 11 Through 18,
Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight,
LowProfile Should Be Used in Place of MS3109, Dash Numbers 1 T
Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle,Low
Profile Should Be Used in Place of MS3117, Dash Numbers
Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight,
LowProfile, Miniature
Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle,Low
Profile, Miniature
Insulating Components, Molded,Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T
Insulating Components, Molded,Electrical, Heat Shrinkable, Strain Relief and Sealing, Y
Insulating Components, Molded,Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, 1 to 3
Insulating Components, Molded,Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T
Storage of AerospaceElastomeric Seals and Seal Assemblies Which Include an Elastomer ElementPrior to
Hardware Assembly FSC 5330
(R) Steel, Investment Castings0.50Cr - 0.55Ni - 0.25Mo (0.11 - 0.17C) (SAE 8615) Normalized UNS J11442
Steel, Investment Castings0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized andTempered
(UNS J13042)
(R) Steel, Maraging,Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum
MeltedHomogenized, Overaged, and Solution Heat Treated (UNS J93150)
(R) Steel, Maraging,Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Homogenized,Overaged, and
Solution Heat Treated (UNS J93010)
(R) Steel, CorrosionResistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization,Solution,
and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) T
(R) Steel, CorrosionResistant, Investmment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization,Solution,
and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa)
(R) Steel, CorrosionResistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization,Solution,
and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) T
(R) Steel, CorrosionResistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution andPrecipitation
Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength
(R) Steel, CorrosionResistant, Investment, 13Cr Free Machining; Hardened and Tempered UNS J91161
(R) Steel, Corrosion andModerate Heat Resistant, Investment Castings 12.5Cr (SAE 51410) Hardened
andTempered UNS J91152
(R) Steel, CorrosionResistant, Investment Casting, 17Cr - 0.55Mo (0.95 - 1.20C) Annealed UNSJ91639

Steel, Corrosion Resistant,Investment Castings 16Cr - 1.8Ni - 0.08N as Cast UNS J91651
(R) Steel, Corrosion and HeatResistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered
UNSJ91631
Couplings, Clamp, Grooved,V-Band
Couplings, Clamp, Grooved,V-Band, 1.75 to 14.25 Flange OD (-65 to 800 Degrees F) FSC 5340
Couplings, Clamp, Grooved,V-Band, 1.75 to 6.25 Flange OD (-65 to 250 Degrees F) FSC 5340
Couplings, Clamp, Grooved,V-Band, 1.75 to 14.25 Flange OD (-65 to 1200 Degrees F) FSC 5340
(R) Steel, CorrosionResistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution andPrecipitation
Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (
Coupling, Fuel Line, Flexible,125 psi General Specification for Should Be Used Instead of MIL-C85061B,Which Was Cancelled on 24 August 1999
(R) Steel, CorrosionResistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution HeatTreated,
Precipitation Hardenable (UNS J92110)
(R) Steel, Corrosion and HeatResistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated
(UNSJ92951)
Steel, Corrosion and HeatResistant, Investment Castings 19Cr - 12Ni - 1.0(Cb + Ta) Solution HeatTreated UNS
J92811
(R) Steel, Corrosion and HeatResistant, Investment Castings 25Cr - 20Ni (CK-20) as Cast (UNS J94211)
(R) Steel, Corrosion and HeatResistant, Investment Castings 19Cr - 9.5Ni Solution Heat Treated (UNSJ92620)
Fuse, Current Limiter Type,Aircraft
Nickel Alloy, Corrosion andHeat Resistant, Investment Castings, 73Ni - 12Cr - 4.5Mo - 2.0Cb - 0.70Ti -0.05C 6.0Al - 0.010B - 0.10Zr Vacuum Cast, as Cast (UNS N077
Valves, Safety, Cabin Air,General Specification for
(R) Cobalt Alloy, Corrosionand Heat Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo as CastUNS
R30030
Cobalt Alloy, Corrosion and HeatResistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W as Cast
(UNSR30031)
Nickel Alloy, Corrosion andHeat Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1(Cb+Ta) -0.90Ti 0.60Al - 18Fe Vacuum Melted Homogenization and Solution
Alloy Castings, Investment,Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al -0.006B
Vacuum-Melted, Vacuum-Cast, Solution and Precipitation He
(R) Cobalt Alloy, Corrosionand Heat Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo as CastUNS
R30021
(R) Nickel Alloy, Corrosionand Heat Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W
-18.5Fe as Cast (UNS N06002)
Nickel Alloy, Corrosion andHeat Resistant, Investment Castings 73Ni - 13Cr - 4.5Mo - 2.3Cb - 0.75Ti -6.0Al 0.010B - 0.10Zr Vacuum Cast, as Cast (UNS N07713)

Steel, Corrosion Resistant,Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22(Cb + Ta) - 2.8Cu SolutionHeat
Treated UNS J92200
Nickel Alloy, Corrosion andHeat Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -1.6Al 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
(R) Steel, Corrosion Resistant,Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and
PrecipitationHeat Treated (H935) 170 ksi (1172 MPa) Tensile Strength (
(R) Nickel Alloy, Corrosionand Heat Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb
VacuumMelted, Vacuum Cast as Cast (UNS N26625)
(R) Nickel Alloy, Corrosionand Heat Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb
VacuumMelted, Vacuum Cast as Cast, Specification UNS N26625 09 1996
Fitting, Union, Tube, .375Bulkhead FSC 4730; Should Be Used Instead of AN832 and MS24393 That
WereCancelled on 11 February 2000
Steel Castings, Vacuum Melted,Vacuum Cast, Investment, Corrosion Resistant 13Cr - 8.0Ni - 2.2Mo 1.1Al(195,000 psi (1344 MPa) Tensile Strength (Condition H1000) Ho
Hydraulic Systems, Aircraft,Design and Installation Requirements for FSC 1650; Should Be Used Instead
ofMIL-H-5440H, Which Was Cancelled on 13 September 1999
Steel, Corrosion Resistant,Sheet, Strip, and Plate 17Cr (SAE 51430) Annealed (UNS S43000)
Steel Sheet, Strip, and Plate,Corrosion and Heat Resistant 12.5Cr (SAE 51410) Annealed UNS S41000
R(1995)
Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 12Cr (SAE 51410 Modified) FerriteControlled,
Annealed (UNS S41000)
Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40-C) (SAE 51420) AnnealedR(1995)
Steel Sheet, Strip, and Plate,Corrosion and Heat Resistant 17Cr-13Ni-2.5Mo (SAE 30316L) Solution
HeatTreated UNS S31603 R(2000)
Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 13Cr - 2.0Ni - 3.0W Annealed (CompositionSimilar
to UNS S41800)
Steel, Corrosion and HeatResistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) SolutionHeat
Treated UNS S32100
Steel, Corrosion ResistantSheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated UNS S30403
Steel, Corrosion and Heat Resistant,Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution
HeatTreated UNS S34700
Steel, Corrosion Resistant,Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated UNSS30400
Steel, Corrosion Resistant,Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated
Steel, Corrosion Resistant,Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated UNSS30200
Steel, Corrosion Resistant,Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa)
TensileStrength UNS S30100
Steel, Corrosion Resistant,Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 150 ksi (1034 MPa)Tensile
Strength UNS S30100

Steel, Corrosion Resistant,Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa)Tensile
Strength UNS S30100
Steel, Corrosion and HeatResistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1AlSolution Heat
Treated, Precipitation Hardenable UNS S15700
Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 25Cr - 20Ni (SAE 30310S) Solution HeatTreated
UNS S31008 R(2000)
Steel, Corrosion andResistant, Sheet, Strip, and Plate 23Cr - 13.5Ni (SAE 30309S) Solution HeatTreated
Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 18Cr - 13Ni - 2.5Mo (SAE 30316) SolutionHeat
Treated UNS S31600
Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B -0.30V 1800
Degrees F (982 Degrees C) Solution Heat Treated (UNS
Steel, Corrosion Resistant,Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1A1 Solution Heat Treated,Precipitation
Hardenable UNS S17700 R(2000)
Steel, Corrosion Resistant,Sheet and Strip 17Cr - 7.1Ni - 1.1AL Solution Heat Treated and Cold
Rolled,Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 m
Iron Alloy, Corrosion and HeatResistant, Sheet, Strip, and Plate 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W
-1.0Cb - 0.15N Solution Heat Treated (UNS R30155)
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W18.5Fe Solution Heat Treated UNS N06002 R(2000)
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W18.5Fe Solution Heat Treated (UNS N06002) UNS N06002 R(200
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed
UNSN06600 R(2000)
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb - 2.5Ti -0.70A1 7.0Fe Annealed UNS N07750 R(2000)
Alloy, Corrosion and HeatResistant, Sheet, Strip, and Plate 57 Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti -1.4Al 0.05Zr - 0.006B Consumable Electrode or Vacuum Inductio
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -1.5Al 0.006B Vacuum Induction and Consumable Electrode Melt
Steel, Corrosion and HeatResistant, Sheet and Strip 15.5 Cr - 4.5Ni - 2.9Mo - 0.10N Solution HeatTreated
Steel, Corrosion and HeatResistant, Sheet and Strip 16.5Cr - 4.5Ni - 2.9Mo - 0.10N 1850 to 1975Degrees F
(1010 to 1079 Degrees C) Annealed UNS S35000
Alloy, Corrosion and HeatResistant, Sheet, Strip, and Plate 46Fe - 20.5Cr - 32Ni - 1.1Ti Annealed
(UNSN08801)
Nickel, Sheet and Strip Low(0.02 Max) Carbon Annealed (UNS N02201)
Steel, Corrosion and HeatResistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Annealed UNS S35000
Steel, Corrosion and HeatResistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (SAE30347)
Solution Heat Treated (UNS S34700)
Steel, Corrosion and HeatResistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Thin WallSolution
Heat Treated (UNS S34700)

Steel, Corrosion and HeatResistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin WallSolution
Heat Treated (UNS S32100)
Steel, Corrosion Resistant,Seamless Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated UNS S30400
Steel, Corrosion and HeatResistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni0.28N High-Pressure Hydraulic UNS S21900
Steel, Corrosion and HeatResistant, Seamless Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat TreatedUNS
S21904
Steel, Corrosion Resistant,Tubing 19Cr - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded
PlusUltrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper
Steel, Corrosion Resistant,Welded Tubing 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated UNS S30400
Steel, Corrosion Resistant,Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) High Pressure,Cold
Drawn UNS S30400
Steel, Corrosion Resistant,Seamless or Welded Tubing 19Cr - 10Ni (SAE 30304) Hydraulic, Annealed
(UNSS30400)
Steel, Corrosion and HeatResistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (SAE 30321) Solution HeatTreated
UNS S32100
Steel, Corrosion and HeatResistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Solution
HeatTreated UNS S34700 R(2000)
Steel, Corrosion and HeatResistant, Seamless Tubing 25Cr - 20Ni (SAE 30310S) Solution Heat Treated(UNS
S31008)
Steel, Corrosion and HeatResistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Solution HeatTreated
UNS S34700
Steel, Corrosion and HeatResistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution HeatTreated
UNS S32100
Steel, Corrosion and HeatResistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu VacuumInduction
Plus Consumable Electrode Vacuum Melted Solution Heat Treate
Nickel Alloy, Corrosion and HeatResistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe Annealed UNS N06600
Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al -7.0Fe
Annealed (UNS N07750)
Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al -7.0Fe
Solution Heat Treated (UNS N07750)
Steel, Corrosion and HeatResistant, Seamless and Welded Hydraulic Tubing 17Cr - 12Ni - 1.5Mo - 0.03Cmax
Cold Drawn, 1/8 Hard Temper UNS S31603
Alloy, Corrosion and HeatResistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb -0.15N
Solution Heat Treated (UNS R30155)
Nickel Alloy, Corrosion andHeat Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al0.006B - 0.08Zr Consumable Electrode or Vacuum Induction Me
Clamp, Loop, Plain, Support,Aircraft
Nickel Alloy, Corrosion andHeat Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W 18.5FeSolution Heat Treated UNS N06002

Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti -0.50A1 18Fe Consumable Electrode or Vacuum Induction Melted 177
Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti -0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted 195
Steel, Corrosion and HeatResistant, Tubing, Seamless, 12.5Cr (SAE 51410) Annealed UNS S41000
Iron-Nickel Alloy, Corrosionand Heat Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15SiSolution
Heat Treated (UNS N08330)
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo -3.2W 18.5Fe Solution Heat Treated (UNS N06333)
Steel, Corrosion Resistant,Sheet, Strip, and Plate 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat TreatedUNS
S21904
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50Al - 18Fe Consumable Electrode or Vacuum Inducti
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Me
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate, 72Ni - 15.5Cr - 0.95 (Cb + Ta) -2.5Ti 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Me
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo 3.7(Cb+Ta)Annealed UNS N06625
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo 3.7(Cb+Ta)Annealed UNS N06625
Steel, Corrosion Resistant,Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution HeatTreated,
Precipitation Hardenable (UNS S17400)
Compass; Magnetic, Pilot'sStandby FSC 6605; Should Be Used Instead of MIL-C-5604B, Which Was
Cancelledon 31 August 1999
Cobalt Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W 0.07LaSolution Heat Treated (UNS R30188)
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr - 0.12Cb (SAE
51410Modified) Ferrite Controlled, Annealed UNS S41040
Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 12.5Cr - Low Carbon (SAE 51416,
51416Se)Free- Machining UNS S41600, S41623
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled,Annealed
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 12.5Cr (SAE 51410)Annealed
(UNS S41000)
Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 12Cr - 0.50Mo Annealed (UNS S41025)
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0WAnnealed
UNS S41800
Steel Bars, Wire, andForgings, Corrosion Resistant 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum InductionPlus Vacuum
Consumable Electrode Melted Solution Heat Treated, Preci

Steel, Corrosion Resistant,Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C)
ConsumableElectrode Vacuum Melted UNS S44004
Steel, Corrosion and HeatResistant, Bars, Wire,and Forgings 13Cr (0.30 - 0.40C) (SAE 51420F, 51420Se)FreeMachining Grade UNS S42020 (Type 2); S42023 (Type 1)
Steel, Corrosion Resistant,Bars, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al
VacuumInduction Plus Consumable Electrode Melted Solution Heat Treated
Steel, Corrosion Resistant,Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C)
(UNSS44004)
Steel, Corrosion Resistant,Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440F) FreeMachining, Annealed UNS S44020 (Type I), UNS S44023 (Type II)
Steel, Corrosion Resistant,Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free- Machining,Solution
Heat Treated
Steel, Corrosion Resistant,Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn100
ksi (689 MPa) Tensile Strengh (UNS S30200)
Steel, Corrosion Resistant,Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn125
ksi (862 MPa) Tensile Strength UNS S30200 R(2000)
Steel, Corrosion Resistant,Bars and Forgings 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al Free-MachiningSwaging
or Upsetting Solution Heat Treated (UNS S30345)
Steel, Corrosion Resistant,Bars, Wire, Forgings, Tubing, and Rings 19Cr - 10Ni Solution Heat Treated(UNS
S30400)
Steel, Corrosion Resistant,Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining (UNS S30300 (Type 1))
(UNS S30323 (Type 2)) (UNS S30310 (Type 3))
Steel, Corrosion Resistant,Bars, Wire, and Forgings 18.5Cr - 10Ni - 0.22Se (SAE 30303Se) FreeMachining;Swaging or Upsetting Solution Heat Treated UNS S30323 R(2000
Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining,Solution
Heat Treated UNS S34720 Type 1; UNS S34723 Type 2 R(2000
Steel, Corrosion Resistant,Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30(Cb+Ta) 4.0CuSolution Heat Treated, Precipitation Hardenable UNS S17400
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb
(SAE30347) Solution Heat Treated (UNS S34700)
Steel, Corrosion Resistant,Bars, Wire, Forgings, Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated(UNS
S30403)
Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 18Cr - 13Ni - 2.1Mo Free Machining
SolutionHeat Treated (UNS J92200)
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 23Cr - 13.5Ni (SAE
30309S)Solution Heat Treated (UNS S30908)
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5MoSolution Heat
Treated (UNS S31603)
Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V(0.200.25C) Hardened and Tempered (UNS S42200)
Steel, Corrosion Resistant,Bars, Wire, Forgings, Extrusions, and Rings 9.0Mn - 20Cr - 6.5Ni - 0.27NSolution
Heat Treated UNS S21904
Steel, Corrosion Resistant,Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb 3.5CuConsumable Electrode Melted Solution Heat Treated, Precipitation

Nickel-Iron Alloy, Corrosionand Heat Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti -0.015B 34Fe Consumable Electrode or Vacuum Induction Melted Sol
Nickel-Iron Alloy, Corrosionand Heat Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti0.015B - 35Fe Consumable Electrode or Vacuum Induction Me
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50Al - 18Fe Consumable Electrode or Vacuum Induction
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50Al - 18Fe Consumable Electrode or Vacuum Induction
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 74Ni - 15.5Cr - 8.0Fe UNS N06600
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo -3.65
(Cb+Ta) Annealed UNS N06625
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti -0.70Al 7.0Fe Equalized, Precipitation Hardenable (UNS N07750)
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti 1.0(Cb+Ta) - 0.70Al 2100 Degrees F (1149 Degrees C) Solution an
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti -0.70Al 7.0Fe Consumable Electrode or Vacuum Induction Melted
Steel Wire, CorrosionResistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu PrecipitationHardenable, Spring
Temper UNS S45500 R(2000)
Steel, Corrosion and HeatResistant, Wire 18Cr - 11.5Ni - 0.70 (Cb+Ta) (SAE 30347) Solution HeatTreated
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 70Ni - 2.4 Mn - 15.5Cr - 3.0Ti - 7.0Fe
(UNSN07092)
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 80Ni - 20Cr
Steel, Corrosion Resistant,Wire 17Cr - 7.1Ni - 1.1Al Cold-Drawn, Precipitation-Hardenable (UNS S17700)
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe CompositionSimilar to
UNS N06062
Steel, Corrosion and HeatResistant, Welding Wire 18.5Cr - 11Ni - 0.40Cb (SAE 30347) UNS S34781
Nickel Alloy, Corrosion andHeat Resistant Coating, Rods and Wire 78Ni - 20Cr
Steel, Corrosion Resistant,Safety Wire, 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated, Cold
Finished(Composition Similar to UNS S30500)
Steel, Corrosion Resistant,Rivet Wire, 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated UNS S30500
Nickel Alloy, Corrosion andHeat Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Annealed (UNS N06600)
Steel, Corrosion Resistant,Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper UNS S30200

Steel, Corrosion and HeatResistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated
(UNSS32100)
Steel, Corrosion and HeatResistant, Wire 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat TreatedComposition
Similar to UNS S31600
Steel, Corrosion and HeatResistant, Welding Wire 19Cr - 12.5Ni - 2.5Mo UNS S31680
Steel, Corrosion and HeatResistant, Welding Wire 27Cr - 21.5Ni (UNS S31080)
Steel, Corrosion Resistant,Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated
Nickel Alloy, Corrosion andHeat Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1Temper,
Precipitation Hardenable UNS N07750 R(2000)
Nickel Alloy, Corrosion andHeat Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe
SpringTemper, Precipitation Hardenable UNS N07750 R(2000)
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb -1.8Ti
Consumable Electrode or Vacuum Induction Melted 1800 Degree
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb -1.8Ti
Consumable Electrode or Vacuum Induction Melted 1750 Degree
Nickel Alloy, Corrosion andHeat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al -0.05Zr 0.006B Consumable Electrode or Vacuum Induction Melted
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo -3.0Ti 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo -3.0Ti 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo -3.0Ti 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo -3.0Ti 1.4Al Consumable Electrode or Vacuum Induction Melted 1
Nickel Alloy, Corrosion andHeat Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti -1.4Al 0.05Zr - 0.006B Consumable Electrode or Vacuum Inductio
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti1.6Al - 0.006B Vacuum Melted, Solution Heat Treated Precipi
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti1.6A1 - 0.006B Vacuum Melted, Solution and Precipitation He
Iron-Nickel Alloy, HeatResistant, Bars, Forgings, and Rings 44Fe - 18.5Cr - 35.5Ni - 1.1Si SolutionHeat
Treated (UNS N08330)
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo -3.2W 18.5Fe Solution Heat Treated UNS N06333
Steel Bars, Wire, Forgings,Tubing, Rings, and Extrusions, Corrosion Resistant 11.8 Cr - 2.5Ni - 1.8Mo -0.33V
(0.08 - 0.15C) Annealed, Vacuum Arc or Electroslag Reme
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo -2.1Ti 0.006B - 0.30V Consumable Electrode Melted, 1800 Degrees
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo -2.1Ti 0.006B - 0.30V Consumable Electrode Melted 1800 Degrees F

Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti -0.006B 0.30V Consumable Electrode Melted, 1650 Degrees F (899
Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti -0.006B 0.30V Consumable Electrode Melted 1650 Degrees F (899 D
Steel Bars, CorrosionResistant 18Cr - 9Ni (SAE 30303F) Free Machining, High Yield StrengthSolution Heat
Treated and Cold Worked UNS S30323 R(2000)
Steel, Corrosion and HeatResistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution HeatTreated,
Sub-Zero Cooled, Equalized, and Over-Tempered UNS S35500
Steel, Corrosion and HeatResistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170ksi
(1172 MPa) Tensile Strength (UNS S35500)
Steel, Corrosion and HeatResistant, Bars and Forgings 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Equalized andOverTempered UNS S35000
Alloy Bars and Forgings,Corrosion and Heat Resistant 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al -31Fe
Consumable Electrode Vacuum Melted Solution and Precipitation
Steel, Corrosion Resistant,Bars, Wire, Forgings, and Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C)
PremiumQuality for Bearing Applications, Double Vacuum Melted UNS S42
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo -0.60W 18.5Fe Solution Heat Treated (UNS N06002)
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 64Ni - 5.0Cr - 24.5Mo - 5.5FeSolution
Heat Treated (UNS N10004)
Alloy, Corrosion- Resistant,Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable
ElectrodeVacuum Melted Solution Heat Treated for Work Strengthening (UNS
Cobalt Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 52Co - 20Cr - 10Ni - 15W SolutionHeat
Treated (UNS R30605)
Steel, Corrosion ResistantBars, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.50 (Cb + Ta) -1.5Cu
Solution Heat Treated UNS S45000
Steel, Corrosion Resistant,Bars, Wire, Forgings, Extrusions, and Rings 5.0 Mn - 22Cr - 12.5Ni - 2.2Mo
-0.20Cb - 0.30N - 0.20V Solution Heat Treated UNS S20910
Alloy, Corrosion and HeatResistant, Bars and Forgings 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe SolutionHeat
Treated (UNS N08800)
Alloy, Corrosion and HeatResistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W -1.0Cb 0.15N - 31Fe Solution and Precipitation Heat Treated (UNS R
Alloy, Corrosion and HeatResistant, Bars, Forgings, and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W
-1.0(Cb+Ta) - 0.15N - 32Fe Solution Heat Treated UNS R30155
Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 74Ni - 7.0Cr - 16.5Mo Solution
HeatTreated (UNS N10003)
Cobalt Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 40Co - 22Cr - 22Ni - 14.5W 0.07LaSolution Heat Treated (UNS R30188)
Steel, Corrosion and HeatResistant, Welding Wire 16.5Cr - 4.5Ni - 2.9Mo - 0.10N (UNS S35080)
Steel, Corrosion and HeatResistant, Welding Wire 12.5Cr (SAE 51410) (UNS S41001)
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 72Ni - 15.5Cr - 1.0Cb - 2.4Ti - 0.70Al - 7.0Fe(UNS
N07069)

Covers, Aircraft Components,General Requirements for

Steel, Corrosion and HeatResistant, Welding Wire 15.5Cr - 4.5Ni - 2.9Mo - 0.10N UNS S35500
Steel, Corrosion and HeatResistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20TiVacuum
Induction Melted (UNS S63197)
Steel, Corrosion and HeatResistant, Welding Wire 29Cr - 9.5Ni UNS S64299
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe (UNS N10004)
Cobalt Alloy, Corrosion andHeat Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C
UNSR30006
Cobalt Alloy, Corrosion andHeat Resistant, Welding Wire 54Co - 25.5Cr - 10.5Ni - 7.5W UNS R30031
Steel, Corrosion and HeatResistant, Welding Wire 20Cr - 10Ni - 0.75Cb High Ferrite Grade UNS S34780
Cobalt Alloy, Powder, PlasmaSpray 56.5Co - 25.5Cr - 10.5Ni - 7.5W
Powder, Plasma Spray 95Ni -5Al
(R) Iron Alloy, Corrosion andHeat Resistant Welding Wire 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb0.15N Annealed (UNS R30155)
Cobalt Alloy, Corrosion andHeat Resistant, Welding Wire 52Co - 20Cr - 10Ni - 15W UNS R30605
Alloy Welding Wire, Corrosionand Heat Resistant 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe
(UNSN06002)
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al -0.006B
Cobalt Alloy, Corrosion andHeat Resistant, Welding Wire 39Co - 22Cr - 22Ni - 14.5W - 0.07La UNS R30188
Iron-Nickel Alloy, Corrosionand Heat Resistant, Welding Wire 41Fe - 37.5Ni - 14Co - 4.8(Cb + Ta) 1.5TiVacuum Melted, Low Expansion UNS N19907
Steel, Corrosion and HeatResistant, Welding Wire 16.4Cr - 4.8Ni - 0.22 (Cb+Ta) - 3.6Cu Vacuum Melted(UNS
S17480)
Steel, Corrosion and Heat Resistant,Welding Wire 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V UNS
K66286
Steel, Corrosion and HeatResistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V
VacuumInduction Melted, Environment Controlled Packaging (UNS S66286
Steel, Corrosion and HeatResistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace
ElementControlled
Steel, Corrosion and HeatResistant, Flat Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800Degrees F
(982 Degrees C) Solution Treated, Cold Drawn or Cold Roll
Tube - Pitot, ElectricallyHeated
Cobalt Alloy, Corrosion andHeat Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted
UNSR30918

Steel, Corrosion and HeatResistant, Welding Wire 13Cr - 2.0Ni - 3.0W UNS S41800
Cobalt Alloy, Corrosion andHeat Resistant, Hardfacing Rod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo
(UNSR30021)
Steel, Corrosion Resistant,Welding Wire 12Cr (SAE 51410 Modified) Ferrite Control Grade (UNS S41081)
UNSS41081
Steel, Corrosion and HeatResistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V VacuumInduction
Melted UNS S41780
Steel, Corrosion and Heat Resistant,Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction
MeltedUNS S41780
Steel, Corrosion and HeatResistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V (UNS S41780)
Card-Compass Correction FSC6610
Steel, Corrosion Resistant,Welding Wire 16.4Cr - 4.8Ni - 0.22Cb - 3.6Cu UNS S17480
Steel, Corrosion and HeatResistant, Welding Wire 15Cr - 5.1Ni - 0.30Cb - 3.2Cu (UNS S15500) UNS S15500
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al
-0.006B Vacuum Induction Melted, Solution Heat Treated (UNS N
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5A1
VacuumInduction Melted UNS N07090
Nickel-Iron Alloy, Corrosionand Heat Resistant, Welding Wire 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B -35Fe
(UNS N09901)
Alloy, Corrosion and HeatResistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta0.30Al
- 0.05Zr - 0.05La - 0.20N (UNS R30556)
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al18Fe Consumable Electrode or Vacuum Induction Melted (UNS N
Cobalt Alloy, Corrosion andHeat Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution
HeatTreated and Cold Drawn (UNS R30003)
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 72Ni - 3.0Mn - 20Cr - 2.5Cb (UNS N06082)
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 62Ni - 21.5Cr - 9.0Mo - 3.7Cb UNS N06625
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La UNS N06635
Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al (UNS N06231)
Steel, Corrosion and HeatResistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted (UNSS13889)
Cobalt-Nickel Alloy, Corrosionand Heat Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode
Cobalt-Nickel Alloy, Corrosionand Heat Resistant, Bars 19Cr - 36Co - 25Ni -7.0Mo - 0.50Cb - 2.9Ti - 0.20Al9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode

Cobalt-Nickel Alloy, Corrosionand Heat Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode
Alloy, Corrosion Resistant,Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable
ElectrodeVacuum Melted Solution Heat Treated and Work Strengthened (UNS R
Alloy, Corrosion Resistant,Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable
ElectrodeVacuum Melted Solution Heat Treated, Work Strengthened, and Aged
Alloy, Corrosion and HeatResistant, Bars and Forgings 53Ni - 15Cr - 18.5Co - 5.0Mo - 3.2Ti - 4.2A1 -0.03B
Double Vacuum Melted Solution, Stabilization, and Precipit
Steel, Corrosion and HeatResistant, Honeycomb Core Resistance Welded, Square Cell R(2000)
Alloy Bars, Forgings, andRings, Corrosion and Heat Resistant 61Ni - 20.5Cr - 8.5Mo - 3.4Cb - 1.3Ti -5.0Fe
Consumable Electrode or Vacuum Induction Melted Solution H
Steel, Corrosion Resistant,Bars and Wire 19Cr - 10Ni (SAE 30304) High Yield Strength Solution HeatTreated
and Cold Worked UNS S30400
Steel, Corrosion Resistant,Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu MultipleMelted,
Solution Heat Treated, Precipitation Hardenable UNS S45500
Steel, Corrosion Resistant,Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable
ElectrodeRemelted, Solution Heat Treated Precipitation Hardenable (UNS S
Steel, Corrosion Resistant,Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.60Cb - 1.5Cu Solution
HeatTreated, Precipitation Hardenable UNS S45000
Steel, Corrosion Resistant,Plate 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable
ElectrodeMelted Solution Heat Treated, Precipitation Hardenable UNS S
Nickel, Corrosion and HeatResistant, Sheet and Strip Thoria Dispersion Strengthened 2.2ThO2 UNS
N03260R(2000)
Steel, Corrosion Resistant,Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper UNS S30200
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7CbSolution Heat
Treated (UNS N06625)
Alloy, Corrosion and HeatResistant, Sheet, Strip and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45FeSolution Heat
Treated UNS N08800
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30Al -0.05La
Consumable Electrode Melted, Solution Heat Treated (UNS N
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 59Ni - 22Cr - 2Mo - 14W - 0.35Al -0.03La
Solution Heat Treated (UNS N06230)
(R) Nickel Alloy, Corrosionand Heat Resistant, Sheet, Strip, and Foil 62Ni - 21.5Cr - 9.0Mo - 3.7Cb
ColdRolled and Annealed (UNS N06625/N06626)
Steel, Corrosion Resistant,Bars, Wire, Forgings, and Wire 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C)
forBearing Applications UNS S44004
Iron-Nickel Alloy, Bars,Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6Ti Solution HeatTreated,
Precipitation Hardenable Multiple Melted, High Temperature, L
Nickel Alloy, Corrosion andHeat Resistant, Bars Bars, Forgings and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo
-1.2Al Consumable Electrode or Vacuum Induction Melted Anneale
Nickel Alloy, Corrosion andHeat Resistant, Plate 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Annealed
(UNSN06617)

Nickel Alloy, Corrosion andHeat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2AlConsumable
Electrode or Vacuum Induction Melted Annealed (UNS N06617)
Nickel, Corrosion and HeatResistant, Bars, Forgings, and Extrusions Thoria Dispersion Strengthened2.2ThO2
Stress-Relieved UNS N03260 R(2000)
Steel, Corrosion and HeatResistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti
(SAE30321) Solution Heat Treated and Cold Drawn, One- Eighth Hard T
Steel, Corrosion and HeatResistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 11Ni - 0.80Cb (SAE30347)
Solution Heat Treated and Cold Drawn, One- Eighth Hard Tem
Steel, Corrosion Resistant,Bars, Wire, and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C)
ConsumableElectrode Melted Under Pressure
Steel Bars, Forgings, andTubing, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb - 1.0V (1.05 - 1.15C)Premium
Aircraft Quality for Bearing Applications, Double Vacuum Mel
Steel, Corrosion Resistant,Sheet, Strip, and Plate 18Cr - 8Ni (SAE 30301) Solution Heat TreatedComposition
Similar to UNS S30100
Steel, Corrosion Resistant,Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 3/4 Hard, 175 ksi (1207MPa)
Tensile Strength UNS S30100
Steel, Corrosion Resistant,Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, 125ksi
(862 MPa) Tensile Strength UNS S30200
Steel, Corrosion Resistant,Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/2 Hard, 150 ksi
(1034MPa) Tensile Strength UNS S30200
Steel, Corrosion Resistant,Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi
(1207MPa) Tensile Strength UNS S30200
Steel, Corrosion Resistant,Sheet Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276MPa)
Tensile Strength UNS S30200
Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (SAE 30316) ColdRolled, 1/4
Hard, 125 ksi (862 MPa) Tensile Strength UNS S31600
Steel, Corrosion Resistant,Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862MPa)
Tensile Strength UNS S30400
Steel, Corrosion Resistant,Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi
(1034MPa) Tensile Strength Composition Similar to UNS S30400
Steel Sheet and Strip,Corrosion Resistant 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 175 ksi (1207 MPa)Tensile
Strength UNS S30400
Steel Sheet and Strip,Corrosion Resistant 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 185 ksi (1276 MPa)Tensile
Strength Composition Similar to UNS S30400
Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti0.50Al - 18Fe Consumable Electrode or Vacuum Induction Mel
Steel, Corrosion Resistant,Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C)Vacuum
Induction Plus Vacuum Consumable Electrode Melted (UNS S426
Steel, Bars, Wire, Forgings,Extrusions, Tubing, and Rings Wear, Galling, and Corrosion Resistant 5.0Mn -3.5Si
- 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated (UNS S2
Alloy, Corrosion and HeatResistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 30Cb - 5.5Al -0.008B 25.5Fe Multiple Melted, High Temperature, Oxidation Resis
Slings, Aircraft, GeneralSpecification for FSC 1730; Should Be Used Instead of MIL-S-5944C, Which
WasCancelled on 1 July 1999

Nickel Alloy, Corrosion andHeat Resistant, Bar and Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50AL19Fe Consumable Electrode or Vacuum Induction Melted 1775 D
Marking; Standard Hose,Aircraft FSC 4720; Should Be Used Instead of MIL-M-6002A, Which Was
Cancelledon 1 November 1999
Cylinders, Carbon DioxideFilled, Technical FSC 4220; Should Be Used Instead of MIL-C-601G(1), WhichWas
Cancelled on 07 September 1999
Grease, Plug Valve, Gasolineand Oil Resistant, NATO Code Number G-363, Metric FSC 9150; Should Be
UsedInstead of MIL-G-6032D, Which Was Cancelled on 10 September 19
Bearings, Ball, Bellcrank,Antifriction, Airframe FSC 3110
Bearings, Ball, Rod End,Double Row, Self-Aligning FSC 3110
Steel,Chrome-Nickel-Molybdenum (8735) Bars and Reforging Stock (Aircraft Quality)
Conduit, Electrical, Flexible,Shielded, Aluminum Alloy for Aircraft Installations FSC 5975; Should Be Usedfor
New Design Instead of MIL-C-6136, Which Was Inactivate
Sound and Thermal Insulationfor Aircraft General Specification for the Installation of
Cork and Rubber CompositionSheet; for Aromatic Fuel and Oil Resistant Gaskets Should be Used Instead
ofMIL-C-6183, Which Was Cancelled on December 18, 1998
Steel Bars, Forgings, andTubing 1.5Cr - 3.5Ni (0.07 - 0.13 C) (SAE 3310) UNS K44910
Steel Bars, Forgings, andTubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) ConsumableElectrode
Vacuum Remelted Normalized and Tempered
Steel, Bars, Forgings, andTubing 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) (UNS G93106)
Steel, Bars, Forgings, andTubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Vacuum
ConsumableElectrode Remelted (UNS G93106)
Steel, Bars, Forgings, andTubing 1.2Cr - 3.25 Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) ElectroslagRemelted or
Consumable Electrode Vacuum Remelted (UNS G93106)
Steel, Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.20Mo (0.11 - 0.17C) (SAE 8615) (UNS G86150)
Steel Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C)
Steel Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) ConsumableElectrode
Vacuum Melted UNS G86200
Steel, Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc
orElectroslag Remelted UNS G86200 R(2001)
Steel Bars, Forgings, andTubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft- Qualityfor
Bearing Applications Double Vacuum Melted
Steel Bars, Forgings, andRings 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)
Steel Tubing, Mechanical0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) UNS G87350
Steel Bars and Forgings,Carburizing 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615) UNS G46150

Steel Bars and Forgings,Carburizing 1.8Ni - 0.25Mo (0.15 - 0.20C) (SAE 4617) R(1992)
Steel Bars and Forgings,Carburizing 1.8Ni - 0.25Mo (0.17 - 0.22C) (SAE 4620) (UNS G46200) R(1994)
Steel Bars, Forgings andTubing 0.50Cr - 1.8Ni - 0.25Mo (0.17 - 0.23C) (SAE 4320H) UNS H43200
Steel Bars and Forgings 0.25Mo(0.35 - 0.40C) (SAE 4037) UNS G40370
Low-Alloy Steel, Heat-Resistant,Bars, Forgings, and Tubing 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C)
(UNS K23015)
Transmitter, Pressure, Fuel,0-600 psi FSC 6620; Should Be Used Instead of MIL-T-6302B(2), Which
WasCancelled on 16 August 1999
Steel Bars and Forgings, LowAlloy, Heat Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C)
Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C)(UNS
K14675)
Low-Alloy Steel,Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 -0.50C) UNS
K14675 R(2000)
Steel, Heat Resistant, Bars,Forgings, and Tubing; 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum
ArcRemelted UNS K14675
Steel Bars and Forgings 0.90Si- 1.0Cr - 2.0Ni - 3.2Mo - 2.0Cu - 0.10V (0.07 - 0.13C) Vacuum Arc
orElectroslag Remelted UNS K71040
Steel Bars, Forgings, andRings 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)
Steel Bars, Forgings, andRings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) UNS G87400
Steel, Mechanical Tubing,0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) UNS G87400
Steel Bars, Forgings, andTubing 0.65Cr - 0.70Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740 Modified) (UNSK11640)
Steel, Bars and Forgings0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 105 ksi (724MPa)
Tensile Strength (UNS G87400)
Steel Bars and Forgings 0.50Cr- 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125,000 psi
(862MPa) Tensile Strength
Steel, Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.25Mo (0.48 to 0.53C) (SAE 8750) (UNS K13550)
Steel, Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise HeatTreated
UNS G41300
Steel, Bars 0.95Cr - 0.20Mo(0.28 to 0.33C) (SAE 4130) Normalized (UNS G41300)
Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) UNS G41300
Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized UNS G41300

Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) UNS G41350
Steel Sheet, Strip, and Plate0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C)
Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.30 - 0.35C)
Steel Sheet, Strip, and Plate0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) UNS G87400
Steel Sheet, Strip, and Plate0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) (UNS G43400)
Steel Tubing, Seamless 0.95Cr- 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved UNS
G41300
Steel Tubing, Seamless 0.95Cr- 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength
UNSG41300
Steel Tubing, Seamless 0.95Cr- 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength
Steel Tubing, Seamless 0.95Cr- 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved (UNS
G41350)
Steel Bars, Forgings, andRings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
Steel, Mechanical Tubing0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) (UNS G41300)
Steel Tubing, Mechanical0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) UNS G41350
Steel, Welded Tubing 0.95Cr -0.20Mo (0.28 - 0.33C) (SAE 4130) (UNS G41300)
Steel Tubing, Seam-Free, Round0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95.0 Ksi (655 MPa) Tensile
Strength
Steel, Welding Wire 0.50Cr -0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted,
EnvironmentControlled Packaging (UNS G86200)
Steel Bars 1.0Cr - 0.20Mo -0.045Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130.0 ksi (896 MPa)
YieldStrength Free Machining
Steel, Mechanical Tubing0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) UNS G41400
Steel, Bars, Forgings, andRings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed (UNS G41400)
Steel Sheet, Strip, and Plate,Low Alloy, Heat Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C)
Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) UNS G41400
Steel Sheet, Strip, and Plate0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed UNS K22950
Hose, Rubber, Wire-Wound,Synthetic, Ice Eliminating System FSC 4720; Should Be Used Instead of MIL-H6399B, Which Was Cancelled on 1 July 1999

Steel, Bars, Forgings, andTubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 - 0.33C) (UNS K33020)
Steel, Hotwork Tool, Bars andForgings 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) Electroslag Remelted (ESR)
orConsumable Electrode Vacuum Arc Remelted (VAR) Annealed (UNS T
Steel Bars, Forgings, andTubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) Consumable
ElectrodeRemelted UNS K23080
Steel, Bars and Forgings0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) (UNS G43370)
Steel Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum
ConsumableElectrode Remelted UNS G43400
Steel, Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) (UNS G43406)
SAE4340; UNS G43406
Steel, Bars, Forgings, andTubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) ConsumableElectrode
Vacuum Remelted
Steel, Bars, Forgings, andTubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) ConsumableElectrode
Vacuum Remelted (UNS K44220)
Steel Bars, Forgings, andTubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified98BV40)
Steel Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) UNS K22950
Steel, Bars, Forgings, andTubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) ConsumableElectrode
Vacuum Melted (UNS K32550)
Steel Bars, Forgings, andTubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Consumable Electrode VacuumMelted
Steel Bars, Forgings, andTubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.25 - 0.33C) (UNS K23080)
Steel, Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C)(4335 Modified) UNSK23477
Steel Bars, Forgings, Tubing,and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) Consumable
ElectrodeVacuum Melted UNS K33517
Steel, Bars, Forgings, Tubing,and Rings 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C)
(4335Modified) (UNS K33517)
Steel, Bars, Forgings, andTubing 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) Vacuum
ConsumableElectrode Melted (UNS K24728)
Steel Sheet, Strip, and Plate0.75Mn - 0.80Cr - 1.8Ni - 0.35Mo - 0.20V (0.33-0.38C)
Steel Sheet, Strip, and Plate0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) Vacuum Consumable
ElectrodeMelted, Annealed (UNS K33517) R(1994)
Steel, Sheet, Strip, and Plate5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (UNS T20811)
Steel Sheet, Strip, and Plate1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.45 - 0.50C) Consumable Electrode
VacuumMelted
Steel Sheet, Strip, and Plate1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) Consumable Electrode
VacuumMelted, Annealed

Hose, Rubber, Aircraft PaintFinish Remover FSC 4720; Should Be Used Instead of MIL-H-6439A, Which
WasCancelled on 1 November 1999
Steel, Bars, Forgings, andTubing 1.45Cr (0.98 - 1.10C) (SAE 52100) for Bearing Applications (UNSG52986)
Steel Bars, Forgings, andTubing 1.45Cr (0.98 - 1.10C) (SAE 52100) Premium Aircraft- Quality,Consumable
Electrode Vacuum Melted
Steel, Bars, Forgings, andTubing 1.4Cr (0.98 - 1.10C) (SAE 52100) Electroslag Remelted UNS G52986
Steel, Bars, Forgings, andTubing 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) UNS G61500
Steel, Spring Wire andSprings, 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) Annealed and Cold Drawn
UNSG61500
Shields, Protective, Aircraftand Missiles FSC 1730; Should Be Used Instead of MIl-S-6451E, Which
WasCancelled on 1 July 1999
Steel, Welding Wire 0.30Cr - 1.8Ni- 0.40Mo - (0.23 - 0.28C) Vacuum Melted, Environment Controlled
Packaging(UNS K32550)
Steel Sheet, Strip, and Plate1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) Consumable Electrode Melted
Steel, Sheet, Strip and Plate0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) (UNS G61500)
(R) Steel, Welding Wire 1.0Cr- 1.0Mo - 0.12V (0.18 - 0.23C) Vacuum Melted (UNS K22720)
Wire, Steel Welding 0.75Si -0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) UNS K11365
(R) Steel, Welding Wire 0.95Cr- 0.20V (0.28 - 0.33C) (SAE 6130), Specification UNS K13149 11-1996
Wire, Steel Welding 18.5Ni -8.5Co - 5.2Mo - 0.72Ti - 0.10Al Vacuum Melted, Environment
ControlledPackaging UNS K93130
Wire, Steel Welding 2.0Cr -10Ni - 8.0Co - 1.0Mo - 0.02Al - 0.06V (0.10 - 0.14C) Vacuum Melted,Environment
Controlled Packaging UNS K91971
Steel, CorrosionResistant,Welding Wire 5.2Cr - 0.55Mo UNS S50280
(R) Steel, Welding Wire 1.75Mn- 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, EnvironmentControlled Packaging, Specification 11-1996
Steel, Nitriding, Bars,Forging, and Tubing 1.6Cr - 0.35Mo - 1.1Al (0.38 - 0.43C) UNS K24065
Steel, Nitriding, Bars,Forgings, and Tubing, 1.1Cr - 3.5Ni - 0.25Mo - 1.2Al (0.21 - 0.26C) UNSK52355
Steel, Bars, Forgings, andTubing 0.50Cr - 0.12Mo (0.89 - 1.01C) UNS K19526
Steel Bars, Forgings, andTubing 0.80Cr (0.90 - 1.03C) for Bearing Applications
Steel, Bars and Forgings 3.1Cr- 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Annealed
HeatTreatable to 290 ksi (1999 MPa) Tensile Strength (UNS K92580)

Tie Down, Cargo, Aircraft,Type C-2

Steel, Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) SAE 4340 Normalized andTempered
UNS G43400
Steel, Bars and Forgings 5.0Cr- 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted
(UNST20811)
Steel, Bars and Forgings 5.0Cr- 1.3Mo - 0.5V - (0.38 - 0.43C) UNS T20811
Steel Bars, Forgings, andTubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) Premium Aircraft Quality forBearing
Applications Consumable Electrode Vacuum Melted UNS T11350
Steel Bars, Forgings, andTubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) Premium Aircraft-Quality forBearing
Applications, Double Vacuum Melted UNS T11350
Steel, Maraging, Welding Wire18Ni - 8.0Co - 4.9Mo - 0.40Ti - 0.10Al Vacuum Induction Melted,
EnvironmentControlled Packaging (UNS K92890)
Steel Bars, Forgings, Tubing,and Rings, Maraging 19Ni - 3.0Mo - 1.4Ti - 0.10Al Double Vacuum
Melted,Annealed R(1992)
Steel, Maraging, Sheet, Strip,and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode
Melted,Solution Heat Treated (UNS K92890)
Steel Plate 2.0Cr - 10Ni -14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged
Steel, Sheet, Strip, and Plate0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum
ConsumableElectrode Melted, Annealed UNS K91472
Steel, Bars, Forgings, Tubing,and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C)
ConsumableElectrode Vacuum Melted UNS K91472 01 1997
Steel, Bars, Forgings, Tubing,and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C)
ConsumableElectrode Vacuum Melted, Annealed UNS K91283
Steel, Bars and Forgings 2.0Cr- 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and
Overaged,Specification UNS K92571 09 1996
Steel, Bars 0.95Cr - 0.20Mo(0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized(UNS
G41300)
Steel, Bars 0.95Cr - 0.20Mo(0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized(UNS
G41400)
Steel Bars and Forgings 3.1Cr- 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Annealed (UNS
K92580)
Steel, Welding Wire 2.0Cr -10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment
ControlledPackaging (UNS K92571)
Steel Bars and Forgings,Maraging 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum
Melted,Solution Heat Treated
Plate, Maraging Steel 2.0Cr -10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted, Solution
HeatTreated
Spray Equipment, AircraftWindshield, Anti-Icing
Tubing, Chrome-Molybdenum,4135 Steel, Seamless Aircraft Quality
Tubing, Chrome-Molybdenum,(4130 or 8630) Steel, Seamless and Welded

Steel, Chrome-Molybdenum(4130) Bars and Reforging Stock (Aircraft Quality) Should Be Used Instead
ofMIL- S-6758B, Which Was Cancelled on October 5, 1998
Tape and Sheet, Adhesive,Rubber and Cork Composition FSC 9320; Should Be Used Instead of MIL-T6841,Which Was Cancelled on 31 August 1999
Tubing, Steel, Corrosion-Resistant(S30400), Aeropsace Vehicle Hydraulic System 1/8 Hard Condition
Elastomer, Synthetic, Sheets,Strips, Molded or Extruded Shapes, General Specification for Should Be
UsedInstead of MIL-R-6855, Which Was Cancelled on December 18, 1
Welding, Resistance: Spot andSeam
Heat Treatment of Steel RawMaterials Should Be Used Instead of MIL-H-6875, Which Was Cancelled on
2February 1999
Water Repellent, Window andWindshield, Glass and Plastic FSC 6850; Should Be Used Instead of MIL-W6882F, Which Was Cancelled on 30 September 1999
Ingot, Zinc Alloy (for SheetMetal Forming Dies) FSC 9650; Should Be Used Instead of MIL-I-7068A,
WhichWas Cancelled on 23 August 1999
Tube, Aluminum Alloy,Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality
Fittings, Cargo Tiedown,Aircraft FSC 1670; Should Be Used Instead of MIL-F-7092(2), Which WasCancelled
on 07 September 1999
Sealing Compound, Polysulfide,Accelerator Required, for Aircraft Structures FSC 8030; Should Be
UsedInstead of MIL-S-7124B, Which Was Cancelled on 27 September 1999
Insulation Blanket,Thermal-Acoustical FSC 5640; Should Be Used Instead of MIL-I-7171D, Which
WasCancelled on 30 September 1999
Forging, Steel, forAircraft/Aerospace Equipment and Special Ordnance Applications AREA FORG;Should Be
Used Instead of MIL-F-7190B, Which Was Cancelled on 10 Septemb
Heat Treatment of WroughtCopper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000,
C17200,C17300, C17500, and C17510) Should Be Used Instead of MIL-H-719
Aluminum Rivets, UNS A91100,99Al (1100-H14) (Superseding AMS 7220C)
Aluminum Rivets, UNS A921172.5Cu - 0.3Mg (2117-T4) Procurement Specification FSC 532
Rivets, Carbon SteelProcurement Specification for FSC 5320
Rivets, Steel, CorrosionResistant 18Cr-9Ni Solution Heat Treated Procurement Specification for FSC5320
Rivets, Steel, Corrosion andHeat Resistant 18Cr- 10.5Ni-0.70(Cb + Ta) Solution Heat Treated
ProcurementSpecification for FSC 5320
Rivets, Solid and Tubular,Nickel Alloy Corrosion and Heat Resistant 74Ni - 15.5Cr - 8.0Fe
ProcurementSpecification for FSC 5320
Rivets, Solid, UNS N04400,Corrosion Resistant 67Ni - 31Cu Procurement Specification for
Rivets, Blind, CorrosionResistant Alloy, 67Ni - 31Cu, Procurement Specification for FSC 5320
Rivets, UNS S66286, Steel,Corrosion and Heat Resistant, 80 ksi Shear Strength, ProcurementSpecification for
FSC 5320
Rivets, Alloy, Corrosion andHeat Resistant 52Co-20Cr- 10Ni-15W Solution Heat Treated Procurement
Specificationfor FSC 5320

Rivets, Nickel Alloy,Corrosion and Heat Resistant 47.5Ni-22Cr- 1.5Co-9.0Mo-0.60W-18.5 Fe; SolutionHeat
Treated Procurement Specification for FSC 5320
Inserts, Screw Thread, HelicalCoil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification for
FSC5340
Inserts, Screw Thread, HelicalCoil 72Ni-15.5Cr- 0.95(Cb+Ta) -2.5Ti-0.70 Al-7.0Fe; Corrosion and
HeatResistant Alloy, Procurement Specification for FSC 5340
Nuts, Self-Locking, Steel,Corrosion and Heat Resistant High Strength, All Metal 1200 Degrees F Use,
UNThread Form FSC 5310
Nuts, Self-Locking, Steel,Corrosion and Heat Resistant High Strength, All Metal 1200 Degrees F Use,
UNJThread Form FSC 5310
(R) Nuts, Self-Locking, NickelAlloy, UNS N07001 Classification: 180 ksi/1400 Degrees F
ProcurementSpecification FSC 5310
Rings, Sealing,Tetrafluoroethylene/ Propylene Rubber (FEPM) Hydraulic Fluid and SyntheticOil Resistant 70
to 80
Rings, Sealing,Tetrafluoroethylene/ Propylene Rubber (FEPM) Hydraulic Fluid and SyntheticOil Resistant 85
to 95
Rings, Sealing,Perfluorocarbon (FFKM) Rubber High Temperature Fluid Resistant 70 - 80
Rings, Sealing, Butadiene-Acrylonitrile(NBR) Rubber Fuel Resistant, Low Shrinkage 65 - 75 R(2001)
Rings, Butadiene-Acrylonitrile(NBR) Rubber, Molded Fuel and Low Temperature Resistant 70 - 80
Rings, Sealing, SiliconeRubber High Temperature Resistant, Low Compression Set 65 - 75
Rings, Sealing, FluorocarbonRubber General Purpose, High Temperature, Fuel and Oil Resistant 65 75R(2001)
Rings, Sealing, Silicone (VSI)Rubber Heat-Resistant, Low Compression Set 70 - 80 R(2001)
Rings, Sealing, SiliconeRubber Low Compression Set, Non-Oil Resistant 65 - 75
Rings, Sealing, Silicone(PVMQ) Rubber Low Outgassing, Space and Vacuum Service 45 - 55
Rings, Sealings, Butadiene-Acrylonitrile(NBR) Rubber Fuel Resistant 65 - 75
Rings, Sealing,Butadiene-Acrylonitrile (NBR) Rubber Fuel and Low Temperature Resistant 60 -70
Rings, Sealing,Butadiene-Acrylonitrile (NBR) Rubber Synthetic Lubricant Resistant 65 - 75
Rings, Sealing, Fluorosilicone(FVMQ) Rubber High Temperature Fuel and Oil Resistant 70 - 80 R(2001)
Rings, Sealing,Butadiene-Acrylonitrile (NBR) Rubber Oil Resistant 65 - 75
Gaskets, Type XX EngineAccessory Drive Corrosion Resistant Steel Screen Reinforced ControlledPerformance
Superseding AMS 7283A; FSC 5330

(R) Steel, Highly-StressedSprings 0.95Cr - 0.2V (0.48 - 0.53C) (SAE 6150) Case Hardened UNS G61500
Rings, Sealing, CastLeaded-Tin Bronze, 80Cu - 16Sn - 5Pb As Cast (UNS C92800) R(1994)
Rings, Sealing, Cast TinBronze 80Cu - 19Sn As Cast (UNS C91300) R(1994)
(R) Gasket, Metal O-RingCorrosion and Heat Resistant Steel Procurement Specification for (FSC 5330)
Clamp, Loop Type Bonding FSC5340
Bracket, Support Clamp FSC5340
Balls, Steel, CorrosionResistant 17Cr Hardened (UNS S44002, S44003, S44004) R(1994)
Bolts and Screws, Steel, LowAlloy Heat Treated, Roll Threaded (Superseding AMS 7452K)
Bolts and Screws, Steel, LowAlloy, Heat Resistant 135 000 psi Tensile Strength, Normalized and
Tempered,Roll Threaded (Superseding AMS 7454G)
Bolts and Screws, Steel, LowAlloy, Heat Resistant Hardened and Tempered, Roll Threaded (Superseding
AMS7455E)
Studs, Steel, Low Alloy HeatTreated, Roll Threaded (Superseding AMS 7456H)
Studs, Steel, Low Alloy, HeatResistant Normalized and Tempered, Roll Threaded 135 000 psi Tensile
Strength(Superseding AMS 7458E)
(R) Bolts and Screws, SteelUNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture
RatedProcurement Specification FSC 5306
Bolts and Screws, TitaniumAlloy 6Al - 4V Procurement Specification for FSC 5306; Superseding AMS
7460DR(2000)
Bolts and Screws, TitaniumAlloy 6Al - 4V Fatigue- Rated, Procurement Specification for (Superseding
AMS7461C)
(R) Bolts and Screws, NickelAlloy, UNS N07718 Tensile Strength 185 ksi Fatigue Rated;
ProcurementSpecification FSC 5306
(R) Bolts and Screws, NickelAlloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated
ProcurementSpecification FSC 5306
Bolts, Cobalt-Chromium-NickelAlloy UNS R30035, Tensile Strength 260 ksi, Procurement Specification
FSC5306
Bolts and Screws, UNS N07041Nickel Alloy, Corrosion and Heat Resistant, 155 ksi, ProcurementSpecification
FSC 5306 R(2000)
Bolts and Screws, Steel,Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded
(R) Bolts and Screws, NickelAlloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat
ResistantProcurement Specification FSC 5306
Bolts and Screws, Steel,Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded
Bolts and Screws Roll ThreadedProcurement Specification for FSC 5306 R(2000)
Bolts and Screws, Steel,Corrosion Resistant, UNS S17400 Tensile Strength 140 ksi ProcurementSpecification
(FSC 5306)
Bolts, Cobalt-Chromium-NickelAlloy , UNS R30159, Tensile Strength 260 ksi, Procurement Specification
FSC5306

Bolts and Screws, Steel, UNSS66286 Tensile Strength 130 ksi, Procurement Specification FSC 5306
Bolts and Screws, Steel, UNSS66286 Classification: 130 ksi/1200 Degrees F; 1800 Degrees F Solution
HeatTreated, Aged After Roll Threaded Procurement Specification f
(R) Studs, Corrosion and HeatResistant Steel, UNS S66286 Tensile Strength 130 ksi 1800 Degrees F
SolutionHeat Treated, Aged Before Roll Threading Procurement Specif
Rings, Flash Welded Aluminumand Aluminum Alloys R(1991)
Rings, Flash Welded Corrosionand Heat Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or
CobaltAlloys, or Precipitation-Hardenable Alloys
Rings, Flash Welded Ferriticand Martensitic Corrosion- Resistant Steels (UNS S41000)
Rings, Flash Welded Carbon andLow-Alloy Steels
Rings, Flash Welded Titaniumand Titanium Alloys
Magnets, Rare-Earth/ Cobalt,Permanent Powder- Metallurgy Product
Magnets, Rare-Earth/ Cobalt,Permanent Samarium- Cobalt, 33/67 - 15 (119) 250
Magnets, Rare-Earth/ Cobalt,Permanent Samarium- Cobalt, 33/67 - 18 (143) 250
Nickel-Iron Alloy, Magnetic,Sheet and Strip Annealed
Nickel-Iron Alloy, Magnetic,Sheet and Strip Cold Rolled, Half-Hard Temper
Nickel-Iron Magnetic Alloy,Bars and Forgings
(R) Iron, Commercially Pure,Bar, Sheet, Strip, and Plate Hot Rolled, Unannealed UNS K00095
Nickel-Iron Alloy, Magnetic, Sheetand Strip 50Ni - 50Fe Annealed, Forming Grade (UNS K95000)
Nickel-Iron Alloy, Magnetic,Bars, Rods, Tubing, and Forgings 50Ni - 50Fe (UNS K95000)
Steel, Corrosion-Resistant(18-8) Bars, Wire and Forging Stock (Aircraft Quality) FSC 9510
Lead Alloy Sheet andExtrusions 93Pb - 6.5Sb - 0.50Sn as Fabricated
Tungsten Alloy Shapes,Sintered, High Density
Iron-Nickel-Cobalt Alloy, Barsand Forgings 53Fe - 29Ni - 17Co Low Expansion, Glass Sealing UNS K94610
Iron-Nickel-Cobalt Alloy,Sheet, Strip, and Plate 53Fe - 29Ni - 17Co Low Expansion Glass Sealing,Annealed
UNS K94610

Gold Wire and Ribbon 99.97AuAnnealed

Steel Wire, Copper Clad 99Fe -0.32Mn Annealed
Light, Desk, Aircraft FSC6230; Should Be Used Instead of MIL-L-7768B(1), Which Was Cancelled on
09August 1999
Light, Desk, Aircraft FSC6230; Should Be Used Instead of MIL-L-7768/1, Which Was Cancelled on 09August
1999
Panels, Information,Integrally Illuminated FSC 6220; Should Be Used Instead of MIL-P-7788F(1),Which Was
Cancelled on 13 September 1999
Molybdenum Disulfide,Technical, Lubrication Grade Should Be Used Instead of MIL-M-7866C, Which
wasCancelled on 21 September 1998
Beryllium Bars, Rods, Tubing,and Shapes 4.25BeO - 94Be High Micro-Yield Strength
Beryllium Bars, Rods, Tubing,and Shapes High Ductility Grade
Beryllium Bars, Rods, Tubing,and Shapes Optical Grade
Beryllium Bars, Rods, Tubing,and Shapes Standard Grade
Beryllium Bars, Rods, Tubing,and Shapes Instrument Grade
Terminals, Lug: Splices,Conductor: Crimp Style, Copper, General Specification for FSC 5940; Should BeUsed
Instead of MIL-T-7928G, Which Was Cancelled on 31 August 1
Terminals, Lug and Splices,Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, BellMouthed, Type II, Class 1 (for 150 Degrees C Total Conductor T
Terminals, Lug and Splices,Conductor, Crimp Style, Splice, Electric, (Permanent, Type II, Class 1) for105
Degrees C Total Conductor Temperature FSC 5940; Should Be
Terminals, Lug and Splices,Conductor, Crimp Style, Splice, Electric, (Permanent, Type II, Class 1) for150
Degrees C Total Conductor Temperature FSC 5940; Should Be
Terminals, Lug and Splices,Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper,
Insulated,Ring Tongue, for Thin Wall Wire, Type II Class 1 for 105 Deg
Terminals, Lug and Splices,Conductor, Crimp Style, Copper, Insulated, Rectangular Tongue, for Thin
WallWire, Type II, Class 1 for 105 Degrees C Total Conductor Temp
Terminal Lug and Splices,Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper,Uninsulated,
Ring Tongue Type I, Class 1 for 175 Degrees C Total Conducto
Core Material, PlasticHoneycomb, Laminated Glass Fabric Base, for Aircraft Structural andElectronic
Applications Should Be Used Instead of MIL-C-8073, Which Was Can
Mobility, Towed AerospaceGround Equipment, General Requirements for
Adapter, Aircraft, JackingPoint, Design and Installation of FSC 1730; Should Be Used Instead ofMIL-STD809B, Which Was Cancelled on 1 July 1999
Detector, Ice, Air IntakeDuct, Aircraft Engines and Airframe Systems, General Specification for
Tubing, Steel, Corrosion-Resistant,(304), Annealed, Seamless and Welded

Steel Bars, Carbon, AISI(1095), Aircraft Quality FSC 9510; Should Be Used Instead of MIL-S-8559A,Which
Was Cancelled on 24 September 1999
Binoculars, Prismatic, Hand-Held(for Aeronautical Use) (7 x 50 and 6 x 42 (Wide Field)) FSC 6650; Should
BeUsed Instead of MIL-B-8568B, Which Was Cancelled on 30 Se
Adhesive, Acrylic Base, forAcrylic Plastic FSC 8040
Engine; Rocket, SolidPropellant 5 Second Duration, 4500 Pounds Thrust FSC 2845; Should Be UsedInstead of
MIL-E-8581A(AS), Which Was Cancelled on 26 May 2000
Silicone Compound NATO CodeNumber S-736 FSC 6850; Should Be Used Instead of MIL-S-8660C, Which
WasCancelled on 30 September 1999
Knife, Hunting, Sheathed,Survival, Pilot's FSC 7340; Should Be Used Instead of MIL-K-8662E(1), WhichWas
Cancelled on 30 August 1999
Installation and Test ofElectronic Equipment in Aircraft, General Specification for FSC MISC; ShouldBe Used
Instead of MIL-I-8700, Which Was Cancelled on August 23,
Valve; Air Relief, LowPressure
Hydraulic System Components,Aircraft and Missiles, General Specification for Should Be Used Instead
ofMIL-H-8775D, which Was Cancelled on 28 September, 1998
Retainer, Packing, Hydraulicand Pneumatic, Tetrafluoroethylene Resin
Reretainer, Packing, Hydraulicand Pneumatic, Polytetrafluoroethylene, Single Turn
Hose, Air Duct, Flexible,Aircraft
Sealing Compound, TemperatureResistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
Deicing System, PneumaticBoot, Aircraft, General Specification for
Coating, Cadmium (VacuumDeposited) AREA MFFP; Should Be Used Instead of MIL-C-8837B, Which
WasCancelled on 10 September 1999
Fittings and Cargo Rings,Tie-Down, Aircraft Floor FSC 1670; Should Be Used Instead of MIL-F8905B(1),Which Was Cancelled on 07 September 1999
Bearing, Roller,Self-Aligning, Airframe, Antifriction FSC 3110; Should Be Used Instead ofMIL-B-8914B(3),
Which Was Cancelled on 30 August 1999
Steel Bars, Plates, Sheets,Billets, and Reforging Stock Type D6AC
Steel Sheet and Strip,Corrosion-Resistant, Precipitation Hardening (AM350 and AM355), PremiumQuality
FSC 9515; Should Be Used Instead of MIL-S- 8840B, Which Was Can
Bearings, Roller, Rod End,Antifriction Self-Aligning FSC 3110; Should Be Used Instead of MIL-B8952B,Which Was Cancelled on 30 August 1999
Beryllium Sheet and PlateGeneral Requirements for FSC 9535; Should Be Used Instead of MIL-B8964(ASG),Which Was Cancelled on 17 September 1999
Bearings, Plain,Self-Aligning, All Metal FSC 3120; Should Be Used Instead of MIL-B-8976(4),Which Was
Cancelled on 30 August 1999
Gasket, Fuselage Light - CoverScrew FSC 5330
Titanium and Titanium Alloy,Sheet, Strip, and Plate FSC 9535

Ring - Back-Up, BossConnection, AMS 3652, AMS 3656, AMS 3660, AMS 3667 FSC 5330
Cloth, Glass, Finished, forResin Laminates FSC 8305; Should Be Used Instead of MIL-C-9084C, Which
WasCancelled on 10 September 1999
Pin, Straight, Headless,AMS5688, Lock FSC 5315
(R) Bolt, Machine - DoubleHexagon Extended Washer Head, Close Tolerance Shank, UNS S66286, 130
KSI,.3125-24 UNJF-3A FSC 5306
Gasket - Metal O-Ring, .035 TubeX .006 Wall, Cres FSC 5330
Gasket - Metal O-Ring, .062Tube X .006 Wall, Cres FSC 5330
Gasket - Type XX EngineAccessory Drive FSC 5330
Bolt-Machine, Steel, 12 PointHead, .250-28, Black Oxide FSC 5306
Nut, Plain, Hex, BossConnection, Corrosion Resistant Steel FSC 5310
Gasket - Metal O-Ring, .062Tube X .010 Wall, Cres FSC 5330
Gasket - Metal O-Ring, .094Tube X .006 Wall, Cres FSC 5330
Gasket - Metal O-Ring, .094Tube x .010 Wall, CRES FSC 5330
Gasket - Metal O-Ring, .125Tube x .010 Wall, CRES FSC 5330
Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Double Hexagon Extended Washer
Head,.190-32 UNJF-3A FSC 5306
Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Double Hexagon Extended Washer
Head,.250-28 UNJF-3A FSC 5306
Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Double Hexagon Extended Washer
Head,.3125-24 UNJF-3A FSC 5306
Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Double Hexagon Extended Washer
Head,.4375-20 UNJF-3A FSC 5306
Screw, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plate, Double Hexagon Extended Washer
Head,Drilled, .164-36 UNJF-3A FSC 5305
Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plate, Double Hexagon Extended Washer
Head,Drilled, .190-32 UNJF-3A FSC 5306
Bolt, Machine - Steel, AMS 6304,Diffused Nickel- Cadmium Plate, Double Hexagon Extended Washer Head, .
250-28UNJF-3A FSC 5306
Bolt, Machine - Steel AMS6304, Diffused Nickel - Cadmium Plate, Double Hexagon Extended Washer
Head,.3125-24 UNJF-3A FSC 5306
Bracket, Angle, 90 Degree .190x .312 Bolt FSC 5340; Should Be Used for New Design Instead of MS9230C,
WhichWas Cancelled on September 28, 1998
Pin, Cotter - CRES, AMS 7211FSC 2615
Washer, Key - Cres, AMS 5510,180 Deg. Locking FSC 5310
Bolt, Machine-Steel AMS 6322,Black Oxide, Hexagon Head, .190-32 UNJF-3A FSC 5306
Bolt, Machine - Steel, AMS6322, Black Oxide, Hexagon Head, .250-28 UNJF-3A FSC 5306
Bolt, Machine - Steel AMS6322, Black Oxide, Hexagon Head, .3125-24 UNJF-3A FSC 5306
Bolt, Machine - Steel, AMS6322, Black Oxide, Hexagon Head, .375-24 UNJF-3A FSC 5306
Screw, Machine - Steel AMS6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .138-40 UNJF-3A FSC 5305
Bolt, Machine - Steel AMS6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .190-32 UNJF-3A FSC 5306

Bolt, Machine-Steel AMS 6322,Black Oxide, Drilled, 1 Hole, Hexagon Head, .3125-24 UNJF-3A FSC 5306
Bolt, Machine - Steel, AMS6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .375-24 UNJF-3A FSC 5306
Stud, Shouldered, HexagonWrenching Steel, .190-32 NF- 3A X .190-32 NF-3A FSC 5307
Stud, Shouldered and Stepped,Hexagon Wrenching Steel, .190-32 NF-3A X .250-28 UNF-3A FSC 5307
Stud, Shouldered, HexagonWrenching Steel, .250-28 UNF- 3A X .250-28 UNF-3A FSC 5307
Stud, Shouldered and Stepped,Hexagon Wrenching, Steel, .250-28 UNF-3A X .3125-24 UNF-3A FSC 5307
Stud, Shouldered and Stepped,Hexagon Wrenching Steel, .250-28 UNF-3A X .375-24 UNF-3A FSC 5307
Stud, Shouldered, HexagonWrenching, Drilled, Steel, .190-32 NF-3A X .190-32 NF-3A FSC 5307
Stud, Shouldered and Stepped,Hexagon Wrenching, Drilled, Steel, .190-32 UNF-3A X .250-28 UNF-3A FSC
5307
Stud, Shouldered, HexagonWrenching, Drilled, Steel, .250-28 UNF-3A X .250-28 UNF-3A FSC 5307
Stud, Shouldered and Stepped,Hexagon Wrenching, Drilled, Steel, .250-28 UNF-3A X .3125-24 UNF-3A FSC
5307
Stud, Shouldered and Stepped,Hexagon Wrenching, Drilled, Steel, .250-28 UNF-3A X .375-24 UNF-3A FSC
5307
Screw, Machine - Steel,Slotted Hexagon Head, .190-32, Ni-Cad Plate FSC 5305
Screw, Machine - Steel,Slotted Hexagon Head, .250-28 Ni-Cad Plate FSC 5305
Rivet, Solid - 100 DegreeFlush Head, AMS 7233 FSC 5320
Rivet, Solid - Universal Head,AMS 7233 FSC 5320
Washer, Flat - AMS 6350 FSC5310
Washer, Flat - AMS 5510 FSC5310
Clamp, Loop - Aluminum, .204Hole FSC 5340
Clamp, Loop - Aluminum, .265Hole FSC 5340
Nut, Plain, Hexagon-A-286,Silver Plated FSC 5310
Nut, Castellated,Hexagon-A-286 FSC 5310
Nut, Castellated, Hexagon -A-286, Silver Plated FSC 5310
Nut, Plain, Hex-Drilled -A-286, Silver Plated FSC 5310
Nut, Plain, Hexagon,Check-A-286 FSC 5310
Nut, Plain, Hexagon, Check -A-286, Silver Plated, MIL- S-8879 FSC 5310
Nut, Slotted, Hexagon-Shear,A-286 FSC 5310
Nut, Slotted, Hexagon - Shear,A-286 Silver Plated, MIL-S-8879 FSC 5310
Gasket-Metal O-Ring, .035 TubeX .006 Wall, Silver Plated FSC 5330
Gasket-Metal O-Ring, .062 TubeX .006 Wall, Silver Plated FSC 5330
Gasket - Metal O-Ring, .062Tube x .010 Wall Silver Plated FSC 5330
Gasket - Metal O-Ring, .094Tube X .006 Wall, Silver Plated FSC 5330
Gasket-Metal O-Ring, .094 TubeX .010 Wall, Silver Plated FSC 5330
Gasket-Metal O-Ring, .125 TubeX .010 Wall, Silver Plated FSC 5330
Plug, Expansion - AMS 5510 FSC5340
Plug, Expansion - AMS 4003 FSC5340
Packing, Preformed, AMS 7267,O-Ring FSC 5330

Packing, Preformed, AMS 7267,O-Ring FSC 5330

Pin, Straight, Headless - AMS5735, Lock FSC 5315
Pin, Straight, Headless -CRES, AMS 5735, Dowel Standard and Oversize FSC 5315
Clamp, Loop - Multiple Tube,Detachable Cushion, AMS 5510 FSC 5340
Cushion, Loop Clamp -Multiple, 3-Tube, AMS 3303 FSC 5340
Cushion, Loop Clamp - Multiple,2-Tube, AMS 3303 FSC 5340
Strap, Retaining-MultipleTube, Detachable Cushion, AMS 5510 FSC 5340
Backplate, Retaining Strap AMS5510 FSC 5340
Bolt, Tee Head - AMS 6322,Chamfered, .190-32 UNJF-3A, Cadmium Plate (ASG) FSC 5306
Bolt, Tee Head - AMS 6322,Chamfered, .250-28 UNJF-3A, Cadmium Plate (ASG) FSC 5306
Rivet, Solid - Universal Head,AMS 5737 FSC 5320
Bolt, Tee Head - AMS 5735,Chamfered, .190-32 UNJF-3A FSC 5306
Bolt, Tee Head - AMS 5735,Chamfered, .250-28 UNJF-3A FSC 5306
Bolt, Tee Head - AMS 5735,Chamfered, .3125-24 UNJF-3A FSC 5306
Bolt, Machine-Steel AMS 6304,Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .190-32 UNJF-3A
FSC5306
Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Hexagon Head, Drilled, .250-28 UNJF3AFSC 5306
Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Hexagon Head, Drilled, .3125-24 UNJF3A (ASG) FSC 5306
Screw, Machine, Hexagon Head,Steel, .138-40 UNJF-3A FSC 5305
Screw Machine Hexagon HeadSteel 164-36 UNJF-3A FSC 5305
Bolt, Machine, Hexagon Head,Steel, .190-32 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, .250-28 UNJF-3A FSC 5306
Bolt, Machine, Hexagon HeadSteel, .3125-24 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, .375-24 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, .4375-20 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, .500-20 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, 5625-18 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, .5625-18 UNJF-3A FSC 5306
Bolt, Machine-Steel, AMS 6304,Diffused Nickel-Cadmium Plated Hexagon Head, .750-16 UNJF-3A FSC
5306
Rivet, Solid - 100 DegreeFlush Head, AMS 7235 FSC 5320
Pin, Straight, Heated, .124Diameter AMS 5735 FSC 5315
Pin, Straight, Headed, .186Diameter, AMS 5735 FSC 5315
Pin, Straight, Headed, .248Diameter, AMS 5735 FSC 5315
Pin, Straight, Headed, .311Diameter, AMS 5735 FSC 5315
Pin, Straight, Headed, .373 Diameter,AMS 5735 FSC 5315
Pin, Straight, Headed, .436Diameter, AMS 5735 FSC 5315
Pin, Straight, Headed .497Diameter, AMS 5735 FSC 5315
Washer, Flat - Steel AMS 6437or AMS 6485, Diffused Nickel-Gradium Plated, Countersunk FSC 5310
Pin, Straight, Headless - AMS5132, Lock FSC 5315
Bolt, Machine - Hexagon Head,Full Shank AMS 5731, .190-32 UNJF-3A FSC 5306

Bolt, Machine - Hexagon Head,Full Shank AMS 5731, .250-28 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank AMS 5731, .3125-24 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5731, .375-24 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5731, .4375-20 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5731, .500-20 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5731, .625-18 UNJF-3A FSC 5306
Bolt, Machined - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .190-32 UNJF-3A FSC 5306
Bolt, Machined - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .250-28 UNJF-3A FSC 5306
Bolt, Machined - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .3125-24 UNJF-3A FSC 5306
Bolt, Machined - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .375-24 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .500-20 UNJF-3A FSC 5306
Screw, Machine Steel AMS 6322,Cadmium Plate, Hexagon Head, .138-40 UNJF-3A FSC 5305
Screw, Machine Steel AMS 6322,Cadmium Plate, Hexagon Head, .164-36 UNJF-3A FSC 5305
Bolt, Machine, Hexagon HeadSteel, Cadmium Plated, .190-32 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .250-28 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, Cadmium Plated .3125-24 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .375-24 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .4375-20 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .500-20 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .5625-18 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .625-18 UNJF-3A FSC 5306
Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .750-16 UNJF-3A FSC 5306
Screw, Machine Steel AMS 6322,Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .138-40 UNJF-3A FSC 5305
Screw, Machine Steel AMS 6322,Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3A FSC 5305
Bolt, Machine - Steel AMS 6322,Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .190-32 UNJF-3A FSC 5306
Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .250-28 UNJF-3A FSC 5306
Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .3125-24 UNJF-3A FSC
5306
Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .375-24 UNJF-3A FSC 5306
Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .4375-20 UNJF-3A FSC
5306
Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .500-20 UNJF-3A FSC 5306
Washer, Flat - AMS 5510 FSC5310
Bracket, Flat, Steel, AMS6350, Cad, Plate FSC 5340
Plate, Mending FSC 5340
Nut-Hex, Boss Connection, CRESFSC 5310
Screw, Machine - DoubleHexagon Extended Washer Head, Corrosion and Heat Resistant Steel, .138-40UNJF3A FSC 5305

Screw, Machine - DoubleHexagon Extended Washer Head, Corrosion and Heat Resistant Steel, .164-36UNJF3A FSC 5305
Bolt, Machine-Double Hexagon,Extended Washer Head, Corrosion and Heat Resistant Steel, .190-32 UNJF-3A
FSC5306
Bolt, Machine - Double HexagonExtended Washer Head, Corrosion and Heat Resistant Steel, .250-28 UNJF3A FSC5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .3125-24UNJF3A FSC 5306
Bolt, Machine-Double Hexagon,Extended Washer Head, Corrosion and Heat Resistant Steel, .375-24 UNJF-3A
FSC5306
Screw, Machine - DoubleHexagon Extended Washer Head, Drilled, AMS 5731, .164-36 UNJF-3A FSC 5305
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS5731, .190-32 UNJF-3A
FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS 5731, .250-28 UNJF-3A
FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS 5731, .3125-24 UNJF-3A
FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS 5731, .375-24 UNJF-3A
FSC 5306
Screw, Machine - DoubleHexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, .138-40UNJF-3A
FSC 5305
Screw, Machine - DoubleHexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, .164-36UNJF-3A
FSC 5305
Bolt, Machine-Double Hexagon,Extended Washer Head, Drilled, PD Shank, Silver Plated, .190-32 UNJF-3A
FSC5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Silver Plated, .250-28 UNJF-3A
FSC5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Silver Plated, .3125-24 UNJF-3A
FSC5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Silver Plated, .375-24 UNJF-3A
FSC5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS 5731, Silver Plated, .50020UNFJ-3A FSC 5306
Washer, Key-CRES, AMS 5510, 90Degree, Locking FSC 5310
Washer, key - CRES, AMS 5510,270 Deg. Locking FSC 5310
Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .190-32 UNJF-3A FSC 5306
Bolt, Machine-Hexagon Head,Drilled, 6 Holes, Full Shank, .250-28 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .3125-24 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .375-24 UNJF-3A FSC 5306
Bolt, machine _ Hexagon Head,Drilled 6 Holes, Full Shank, .4375-20 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .500-20 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .5625-18 UNJF-3A FSC 5306
Bracket, Angle, 90 Degree,Cres .190 Bolt FSC 5340

Bracket, Angle, 90 Degree,Cres AMS 5510, .190 X .250 Bolt FSC 5340
Bracket, Angle 90 Degree,Cres, .190 X .312 Bolt FSC 5340
Bracket, Angle, 90 Degree,Cres .190 X .375 Bolt FSC 5340
Bracket, Angle, 90 Degree,Steel .190 Bolt FSC 5340
Bracket, Angle, 90 Degree,Cadmium Plated .190 X .250 Bolt FSC 5340
Bracket, Angle, 90 Degree,Cadmium Plated .190 X .312 Bolt FSC 5340
Bracket, Angle, 90 Degree,Cadmium Plated .190 X .375 Bolt FSC 5340
Bracket, Angle, 90 Degree,Cres .190 X .250 Bolt FSC 5340
Bracket, Angle, 90 Degree,Cres .190 x .312 Bolt FSC 5340
Bracket, Angle, 90 Degree,Cres .190 x .375 Bolt FSC 5340
Screw, Machine - Hexagon Head,PD Shank, Titanium AMS 4967, .138-40 UNJF-3A FSC 5305
Bolt, Machine - Hexagon Head,PD Shank, Titanium AMS 4967, .190-32 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,PD Shank, Titanium AMS 4967, .500-20 UNJF-3A FSC 5306
Bolt, Machine - CRES AMS 5731,Double Hexagon Extended Washer Head, Cupwasher Locked, .190-32
UNJF-3A FSC5306
Bolt, Machine - CRES AMS 5731,Double Hexagon Extended Washer Head, Cupwasher Locked, .250-28
UNJF-3A FSC5306
Bolt, Machine - Cres, AMS5731, Double Hexagon, Extended Washer Head, Cup Washer Locked, .3125-24
UNJF-3A FSC 5306
Bolt, Machine - Cres, AMS5731, Double Hexagon, Extended Washer Head, Cup Washer Locked, .375-24
UNJF-3A FSC 5306
Bolt, Machine - Steel, AMS6322, Cadmium Plated, Double Hexagon, Extended Washer Head, Cup
WasherLocked, .250-28 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, Steel AMS 6304, Diffused Nickel Cadmium
Plate,.190-32 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, Steel AMS 6304, Diffused Nickel Cadmium
Plate,.250-28 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, Steel AMS 6304, Diffused Nickel Cadmium
Plate,.3125-24 UNJF-3A FSC 5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .190-32UNJF3A FSC 5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .250-28 UNJF3AFSC 5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .3125-24UNJF3A FSC 5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .375-24UNJF3A FSC 5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel,.190-32
UNJF-3A FSC 5306
Screw, Machine - DoubleHexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion & HeatResistant
Steel, .138-40 UNJF-3A FSC 5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and HeatResistant
Steel, .190-32 UNJF-3A FSC 5306

Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and HeatResistant
Steel, .250-28 UNJF-3A FSC 5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and HeatResistant
Steel, .3125-24 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Close Tolerance Shank, Corrosion and Heat
ResistantSteel, .250-28 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Cres AMS 5643, .190-32 UNJF-3A FSC
5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, PD Shank, CRES AMS 5643, .250-28 UNJF-3A
FSC5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, PD Shank, CRES AMS 5643, .3125-24 UNJF-3A
FSC5306
Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, PD Shank, CRES AMS 5643, .190-32UNJF3A FSC 5306
Bolt, Machine-Double HexagonExtended Washer Head, Drilled, PD Shank, CRES AMS 5643, .250-28 UNJF3A FSC5306
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Titanium AMS 4967, .190-32 UNJF-3A
FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Titanium AMS 4967, .250-28 UNJF-3A
FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head Drilled, PD Shank, Titanium AMS 4967, .190-32
UNJF-3AFSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Titanium AMS 4967, .250-28
UNJF-3AFSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Titanium AMS 4967, .3125-24
UNJF-3AFSC 5306
Packing, Preformed - AMS 3650,'O' Ring FSC 5330
Packing, Preformed - AMS 3650,Seal FSC 5330
Packing, Preformed - AMS 3617,"O" Ring FSC 5330
Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .190-32 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .250-28 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .3125-24 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .375-24 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .500-20 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .625-18 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5643, .3125-24 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,PD Shank, AMS 5643, .190- 32 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,PD Shank, AMS 5643, .250- 28 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,PD Shank, AMS 5643, .375- 24 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, AMS 5643, .190-32 UNJF-3A FSC 5306
Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, AMS 5643, .500-20 UNJF-3A FSC 5306
Key, Woodruff - Chamfered CRESAMS 5640 FSC 5315
Pin, Straight, Headed, .0937Diameter, AMS 5616 FSC 5315
Pin, Straight, Headed, .1249Diameter, AMS 5616 FSC 5315

Pin, Straight, Headed, .1874Diameter, AMS 5616 FSC 5315

Pin, Straight, Headed, .2499Diameter, AMS 5616 FSC 5315
Pin, Straight, Headed, .3124Diameter, AMS 5616 FSC 5315
Pin, Straight, Headed, .3749Diameter, AMS 5616 FSC 5315
Pin, Straight, Headed, .4999Diameter, AMS 5616 FSC 5315
Washer, Cup, Lock - CRES AMS5510 FSC 5310
Nut, Plain Hexagon - AMS 6322,Cadmium Plate MIL-S- 8879 FSC 5310
Nut, Plain, Hex-Drilled - AMS6322, Cadmium Plated, MIL-S-8879 FSC 5310
Bolt, Machine - Double HexagonExtended Washer Head, AMS 5616, .190-32 UNJF-3A FSC 5306
Bolt, Machine-Double HexagonExtended Washer Head, AMS 5616, .3125-24 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, AMS 5616, .500-20 UNJF-3A FSC 5306
Bolt, Machine-Double HexagonExtended Washer Head, Drilled, AMS 5616, .190-32 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, AMS 5616, .250-28 UNJF-3A FSC 5306
Plug, Machine Thread Drilled,Preformed Packing MIL-S- 8879 Thread FSC 5365
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .19032 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .312524UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .37524 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .437520UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .19032 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .25028 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Steel AMS 6322, Cadmium
Plated,.500-20 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, .
0250-28UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium
Plated,.375-24 UNJF-3A FSC 5306
Bolt, Machine - Double HexagonExtended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, .
5625-18UNJF-3A FSC 5306
Packing, Preformed - AMS 3668,"O" Ring FSC 5330
Packing, Preformed - AMS 3668,Seal FSC 5330
Bolt, Machine, Hexagon Head,Drilled, 6 Hole, PD Shank, Steel AMS 6322, Cadmium Plated, .250-28 UNJF3AFSC 5306
Bolt, Machine, Hexagon Head,Drilled, 6 Hole, PD Shank, Steel AMS 6322, Cadmium Plated, .625-18 UNJF3AFSC 5306
Packing, Preformed - AMS 7273,Seal FSC 5330
Packing, Preformed - AMS 7273,"O" Ring FSC 5330

Hubs, Conduit Connection,Standard Dimensions FSC 5975

Terminal Shank-Swaging,Dimensions for FSC 4030; Should Be Used Instead of AND10081(4), Which
WasCancelled on 07 September 1999
Coupling Installations,Standard Conduit, Electrical FSC 5975
Shot Peening of Metal Parts
Process for Barrier Coating ofAnti-Friction Bearings FSC 3110; Should Be Used Instead of MIL-STD1334B(1),Which Was Cancelled on 2 August 1999
Navigation, Display MulticolorMicrochart/Map Transparencies FSC 6605; Should Be Used Instead of MILSTD-1347, Which Was Cancelled on 30 August 1999
Cleaning Methods andProcedures for Breathing Oxygen Equipment FSC 1660; Should Be Used Instead
ofMIL-STD- 1359B, Which Was Cancelled on 20 September 1999
Bearing, Plain,Self-Lubricating, Self-Aligning, Low Speed, Narrow, Grooved Outer Ring, -65Degrees to 325
Degrees F FSC 3120
Bearing, Plain,Self-Lubricating, Self-Aligning, Low Speed, Wide, Chamfered Outer Ring, -65Degrees F To
325 Degrees F
Bearing, Plain,Self-Lubricating, Self-Aligning, Low Speed, Wide, Grooved Outer Ring, -65Degree F to 325
Degree F FSC 3120
Bearing, Plain,Self-Lubricating, Self-Aligning, Low Speed, Narrow, Chamfered Outer Ring, -65Degrees F to
325 Degrees F
Circuit Breaker - Aircraft,Trip-Free, Push Pull, 25 Thru 35 Amps, Type I -55 to +121 Degrees C
Gyroscope, Displacement, Rolland Pitch (Hard Mounted) FSC 6610; Should Be Used Instead of
MS14114(AS),Which Was Cancelled on 09 August 1999
Circuit Breaker - Aircraft,Trip-Free, Push-Pull 3 Phase, 1 Thru 35 Amp, Type 1
Circuit Breaker - Aircraft,Trip-Free, Push-Pull, 3 Phase, 1 Thru 20 Amp, Type 1 FSC 5925
Lock, Rod End, ImprovedStrength, NAS Lug FSC 5340
Bushing, Sleeve Plain, PressFit, Ream Type
Bushing, Sleeve Flanged, PressFit, Ream Type FSC 3120
Clamp, Loop, Nylon, Metric FSC5340; Should Be Used Instead of DS14243, Which Was Cancelled on 27
September1999
Clamp, Loop Type, Bonding,Metric FSC 5340; Should Be Used Instead of DS14244, Which Was Cancelled on
27September 1999
Pin, Quick Release, PositiveLocking, "L" Handle, Single Action, Detent Wrench/Safety Pin(Slotted) FSC 5340
Clamp, Loop, Plastic, WireSupport, Metric FSC 5340; Should Be Used Instead of DS14487, Which
WasCancelled on 29 October 1999
Clamp, Loop, Plastic, WireSupport, Ribbed Inner Diameter, Metric FSC 5340; Should Be Used Instead
ofDS14488, Which Was Cancelled on 27 September 1999
Bearing, Ball, Annular,Primarily for Aircraft Motor- Generators, Type I FSC 3110
Terminal, Lug, Crimp Style,Copper, Insulated, Rectangular Tongue, Type II, Class 1 for 105 Degrees CTotal
Conductor Temperature

Screw, Externally RelievedBody (Synchro)

Reducers, Oxygen Pressure FSC1660; Should Be Used Instead of MIL-R-17852(AS), Which Was Cancelled on
28July 1999
Compass, Magnetic, Pilot'sStandby FSC 6605; Should Be Used Instead of MS17983, Which Was Cancelled
on30 August 1999
Markings for Aircrew StationDisplays Design and Configuration of FSC 1500; Should Be Used Instead ofMILM-18012B(3), Which Was Cancelled on 02 September 1998
Indicator, Humidity, Plug,Color Change FSC 6685; Should Be Used Instead of MS18013A(AS), Which
WasCancelled on 30 August 1999
Ferrules, Outer, Insulated,Shield Terminating, Type II Two-Piece, Class I, for Shielded Cable FSC 5940;Should
Be Used Instead of MS18121G, Which Was Cancelled on 27
Installation of WindowAnti-Icing, De-Greasing, and Washing Systems (General Specification for)
Lighting, Aircraft Interior,Installation of FSC 6220
(R) Fittings, 24 degrees ConeFlareless, Fluid Connection, 3000 psi
Sleeve, Bite Type, 24 DegreesCone Flareless Fitting, 3000 psi
Lead Alloy Pig FSC 9650;Should Be Used Instead of MIL- L-18331B(AS), Which Was Cancelled on
10September 1999
Thermal Anti-Icing Equipment,Wing and Empennage
Pumps, Hydraulic, VariableFlow, General Specification for
Carbon Removing Compound (forUse in Agitated Tank) FSC 6850; Should Be Used Instead of MIL-C19853D, WhichWas Cancelled on 21 September 1998
Brazing Sheet, Aluminum AlloyShould Be Used Instead of MIL-B-20148D, Which Was Cancelled on 21
September1998
Bearing, Ball, Anti-Friction,Airframe FSC 3110; Should Be Used Instead of MS20218C, Which Was Cancelled
on24 August 1998
Pin, Hinge FSC 5315
Synchros, GeneralSpecification for FSC 5990; Should Be Used Instead of MIL-S-20708, Which WasCancelled
on 15 September 1999
Synchro, Control Transformer,Type 11CT4E FSC 5990; Should Be Used Instead of MIL-S-20708/1F, Which
WasCancelled on 15 September 1999
Synchro, Control Transmitter,Type 11CX4E FSC 5990; Should Be Used Instead of MIL-S-20708/2E, Which
WasCancelled on 15 September 1999
Synchro, Torque Receiver, Type11TR4C FSC 5990; Should Be Used Instead of MIL-S-20708/3E, Which
WasCancelled on 15 September 1999
Synchro, Torque Receiver, Type11TX4C FSC 5990; Should Be Used Instead of MIL-S-20708/4E
Synchro, Torque Receiver, Type26V-11TR4C FSC 5990; Should Be Used Instead of MIL-S-20708/5E, Which
WasCancelled on 15 September 1999
Synchro, Torque Transmitter,Type 26V-11TX4C FSC 5990; Should Be Used Instead of MIL-S-20708/6F,
Which WasCancelled on 15 September 1999

Synchro, Control Transformer,Type 26V-11CT4D FSC 5990; Should Be Used Instead of MIL-S-20708/7E,
Which WasCancelled on 15 September 1999
Synchro, Control Transmitter,Type 26V-11CX4C FSC 5990; Should Be Used Instead of MIL-S-20708/8E,
Which WasCancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 26V- 11CDX4C FSC 5990; Should Be Used Instead of MIL-S20708/9E, Which Was Cancelled on 15 September 1999
Synchro, Control Transmitter,Type 15CX4D FSC 5990; Should Be Used Instead of MIL-S-20708/14G, Which
WasCancelled on 15 September 1999
Synchro, Control Transformer,Type 15CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/15G, Which
WasCancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 15CDX4D FSC 5990; Should Be Used Instead of MIL-S20708/16F, Which Was Cancelled on 15 September 1999
Synchro, Torque DifferentialTransmitter, Type 15TDX4C FSC 5990; Should Be Used Instead ofMIL-S20708/17F, Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 15TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/19G, Which Was Cancelled on 15 September 1999
Synchro, Control Transmitter,Type 15CX6C FSC 5990; Should Be Used Instead of MIL-S-20708/20E, Which
WasCancelled on 15 September 1999
Synchro, Control Transformer,Type 15CT6D FSC 5990; Should Be Used Instead of MIL-S-20708/21F, Which
WasCancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 15CDX6C FSC 5990; Should Be Used Instead of MIL-S20708/22E, Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 15TRX6A FSC 5990; Should Be Used Instead ofMIL-S20708/23E, Which Was Cancelled on 15 September 1999
Synchro, Control Transmitter,Type 18CX4D FSC 5990; Should Be Used Instead of MIL-S-20708/28F, Which
WasCancelled on 15 September 1999
Synchro, Control Transformer,Type 18CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/29F, Which
WasCancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 18CDX4C FSC 5990; Should Be Used Instead of MIL-S20708/30F, Which Was Cancelled on 15 September 1999
Synchro, Torque DifferentialTransmitter, Type 18TDX4C FSC 5990; Should Be Used Instead ofMIL-S20708/31F, Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 18TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/32G, Which Was Cancelled on 15 September 1999
Synchro, Control Transmitter,Type 18CX6C FSC 5990; Should Be Used Instead of MIL-S-20708/33E, Which
WasCancelled on 15 September 1999
Synchro, Control Transformer,Type 18CT6D FSC 5990; Should Be Used Instead of MIL-S-20708/34E, Which
WasCancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 18TRX6B FSC 5990; Should Be Used Instead ofMIL-S20708/35E, Which Was Cancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 18CDX6D FSC 5990; Should Be Used Instead of MIL-S20708/36E, Which Was Cancelled on 15 September 1999
Synchro, Control Transmitter,Type 23CX4D FSC 5990; Should Be Used Instead of MIL-S-20708/45F, Which
WasCancelled on 15 September 1999

Synchro, Control Transformer,Type 23CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/46E, Which
WasCancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 23CDX4C FSC 5990; Should Be Used Instead of MIL-S20708/47E, Which Was Cancelled on 15 September 1999
Synchro, Torque DifferentialTransmitter, Type 23TDX4C FSC 5990; Should Be Used Instead ofMIL-S20708/48E, Which Was Cancelled on 15 September 1999
Synchro, DifferentialReceiver, Type 23TDR4B FSC 5990; Should Be Used Instead of MIL-S20708/49C,Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 23TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/50F, Which Was Cancelled on 15 September 1999
Synchro, Control Transmitter,Type 23CX6D FSC 5990
Synchro, Control Transformer,Type 23CT6D FSC 5990; Should Be Used Instead of MIL-S-20708/53E, Which
WasCancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 23CDX6C FSC 5990; Should Be Used Instead of MIL-S20708/54E, Which Was Cancelled on 15 September 1999
Synchro, Torque DifferentialTransmitter, Type 23TDX6C FSC 5990; Should Be Used Instead ofMIL-S20708/55E, Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 23TRX6B FSC 5990; Should Be Used Instead of MIL-S20708/56E,Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 31TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/62F, Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 31TRX6A FSC 5990; Should Be Used Instead ofMIL-S20708/66E, Which Was Cancelled on 15 September 1999
Synchro, Torque DifferentialReceiver, Type 31TDR6B FSC 5990; Should Be Used Instead of MIL-S20708/67C,Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 37TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/70D, Which Was Cancelled on 15 September 1999
Synchro, Torque ReceiverTransmitter, Type 37TRX6A FSC 5990; Should Be Used Instead ofMIL-S20708/74E, Which Was Cancelled on 15 September 1999
Synchro, Torque DifferentialTransmitter, Type 37TDX6A FSC 5990; Should Be Used Instead ofMIL-S20708/76C, Which Was Cancelled on 15 September 1999
Synchro, Control Transmitter,Type 26V-08CX4C FSC 5990; Should Be Used Instead of MIL-S-20708/78F,
WhichWas Cancelled on 15 September 1999
Synchro, Control Transformer,Type 26V-08CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/79F,
WhichWas Cancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 26V- 08CDX4C FSC 5990; Should Be Used Instead of MIL-S20708/80F, Which Was Cancelled on 15 September 1999
Synchro, Control DifferentialTransmitter, Type 11CDX4B FSC 5990; Should Be Used Instead of MIL-S20708/81E, Which Was Cancelled in 15 September 1999
Synchro, Control Transmitter,Type 15CX4F FSC 5990; Should Be Used Instead of MIL-S-20708/131D, Which
WasCancelled on 15 September 1999
Synchro, Torque Receiver, Type26V-10TR4 FSC 5990; Should Be Used Instead of MIL-S-20708/500A and
Notice 1,Which Were Cancelled on 15 September 1999

Tungsten Base Metal, HighDensity Should Be Used Instead of MIL-T-21014D, Which Was Cancelled
onOctober 5, 1998
Bearing, Ball, Rod End, DoubleRow, Precision, Solid Shank, Self-Aligning, Airframe, Type I, -65 Degrees
to300 Degrees F FSC 3110
Bearing, Ball, Rod End, DoubleRow, Precision, External Thread, Self-Aligning, Airframe, Type II, -65Degrees
to 300 Degrees F FSC 3110
Bearing, Ball, Rod End, DoubleRow, Precision, Hollow Shank, Self-Aligning, Airframe, Type III, -65
Degreesto 300 Degrees F FSC 3110
Bearing, Ball, Rod End, DoubleRow, Precision, Internal Thread, Self-Aligning, Airframe, Type IV, -65Degrees
to 300 Degrees F FSC 3110
Bearing, Plain, Self-Aligning,Grooved Outer Ring FSC 3120
Bearing, Plain, Self AligningFSC 3120; Should Be Used Instead of MS21155B, Which Was Cancelled on
30August 1999
Aluminum-Alloy Castings, HighStrength AREA MECA; Should Be Used Instead of MIL-A-21180D, Which
WasCancelled on 10 September 1999
Bearing, Roller, Rod End,Internal Thread, Self- Aligning, Anti-Friction, Airframe, Heavy Duty, TypeII, -67
Degrees to 350 Degrees F, Sealed FSC 3110; Should Be Used
Bearing, Roller, Rod End,External Thread, Self- Aligning, Anti-Friction, Airframe, Heavy Duty, Type I,-67
Degrees to 350 Degrees F, Sealed FSC 3110; Should Be Used
Bearing, Roller, Rod End,External Thread, Self- Aligning, Anti-Friction, Airframe, Heavy Duty, Type I,-67
Degrees to 350 Degrees F, Sealed FSC 3110; Should Be Used
Bearing, Plain, Self-Aligning,Grooved Outer Ring TFE Lined, Wide FSC 3120; Should Be Used Instead
ofMS21230B, Which Was Cancelled on 03 May 1999
Bearing, Plain, Self-Aligning,TFE Lined, Wide FSC 3120; Should Be Used Instead of MS21231B, Which
WasCancelled on 03 May 1999
Bearing, Plain, Self-Aligning,Groove Outer Ring, TFE Lined, Narrow FSC 3120; Should Be Used Instead
ofMS21232A, Which Was Cancelled on 03 May 1999
Bearing, Plain, Self-Aligning,TFE Lined, Narrow FSC 3120; Should Be Used Instead of MS21233B, Which
WasCancelled 03 May 1999
Bearing, Ball, Airframe,Anti-Friction, Extra Light Duty, Precision
Bearing, Roller, Self-AligningSingle Row Anti- Friction, Sealed -65 to 350 Degrees F, Type I FSC 3110;Should
Be Used Instead of MS21431A, Which Was Cancelled on 05
Bearing, Roller, Needle,Single Row, Heavy Duty, Track Roller, Sealed, Type V Antifriction, Inch FSC3110;
Should Be Used Instead of MS21438C, Which Was Cancelled on
Bearing, Roller, Needle,Double Row, Heavy Duty, Track Roller, Sealed, Type VI, Inch FSC 3110; ShouldBe
Used Instead of MS21439B, Which Was Cancelled on 30 August 19
Bearing, Roller, Needle, TrackRoller, Integral Heavy Stud, Type IX, Antifriction, Inch FSC 3110; Should
BeUsed Instead of MS21441B, Which Was Cancelled on 22 Novmeb
Bearing, Roller, Needle, TrackRoller, Sealed, Type X, Antifriction, Inch FSC 3110; Should Be Used Insteadof
MS21442B, Which Was Cancelled on 24 January 2000
Bearing, Ball, Airframe,Anti-Friction, Pulley
Bearing, Roller, Self-AligningSingle Row, Barrel Roller, Torque Tube, Airframe, Antifriction, Sealed Type
VFSC 3110; Should Be Used Instead of MS21446A, Which Was C

Bearing, Roller, Needle, TrackRoller Crown Radiused O.D. Integral Stud, Type VII Antifriction, Inch
FSC3110; Should Be Used Instead of MS21447A, Which Was Cancelled
Tapes, Pressure-SensitiveAdhesive, Masking, Non- Staining - for Aircraft Painting Applications ShouldBe
Used Instead of MIL-T-21595D, Which Was Cancelled on 21 Sept
Paint System, Fluorescent,Removable, for Aircraft Application
Ferrule, Shield Terminating,Crimp Style FSC 5940; Should Be Used Instead of MIL-F-21608E, Which
WasCancelled on 7 September 1999
Adapter, Flareless Tube to aFlared Tube FSC 4730
Union, Flareless Tube FSC 4730
Plug, Flareless Tube FSC 4730
Cap, Pressure Seal, FlarelessTube Fitting FSC 4730
Adapter, Straight, Tube toBoss FSC 4730
Reducer, External Thread, FlarelessTube FSC 4730
Clamp, Loop Type, CushionedSupport FSC 5340
Nut, Sleeve Coupling,Flareless FSC 4730; Should Be Used Instead of MS21921, Which Was Cancelled on13
January 2000
Sleeve, Coupling, Flareless FSC4730; Should Be Used Instead of MS21922
Adapter, Flareless Tube,Bulkhead and Universal to Flared Tube FSC 4730
Union, Flareless Tube,Bulkhead and Universal FSC 4730
Elbow, 90 Degree Universal,Flareless Tube, High Profile FSC 4730
Elbow, 90 Degree Universal,Flareless Tube, Low Profile FSC 4730
Fitting End, Bolt ClusterFitting, Double Port, Through, Flareless FSC 4730; Should Be Used Instead
ofMS21935C, Which Was Cancelled on 07 September 1999
Nut, Cluster Fitting, RetainerFSC 4730; Should Be Used Instead of MS21937
Bolt, Cluster Fitting, SinglePort Flareless FSC 4730; Should Be Used Instead of MS21938
Bolt, Cluster Fitting, SinglePort, Through, Flareless FSC 4730; Should Be Used Instead of MS21939,
WhichWas Cancelled on 14 September 2000
Bolt, Cluster Fitting, DoublePort, Through, Flareless FSC 4730; Should Be Used Instead of MS21941,
WhichWas Cancelled on 14 September 2000
Body, Cluster Fitting, OneWay, Flareless FSC 4730; Should Be Used Instead of MS21942
Body, Cluster Fitting, TwoWay, 180 Degree, Flareless FSC 4730; Should Be Used Instead of MS21944,
WhichWas Cancelled on 14 September 2000
Body, Cluster Fitting,Three-Way, Flareless FSC 4730; Should Be Used Instead of MS21945
Tapes, Pressure-Sensitive,Adhesive, Preservation and Sealing FSC 7510; Should Be Used Instead of MIL-T22085E, Which Was Cancelled on 10 September 1999

Accelerometer Group, Counting(MS25447 and MS25448) FSC 6610; Should Be Used Instead of MIL-A22145C(AS),Which Was Cancelled on 30 August 1999
Shim Stock, Laminated
Shim Stock, Laminated,Aluminum Alloy FSC 9535

Shim Stock, Laminated, BrassFSC 9535

Shim Stock, Laminated, CRESFSC 9515

Shim Stock, Laminated, CarbonSteel FSC 9515
Cleaning Compound, HighPressure Cleaner, Liquid FSC 6850; Should Be Used Instead ofMIL-C-22542B(AS),
Which Was Cancelled on 21 September 1998
Cartridges, Grease, 14 Ounce(for Cartridge-Type Grease Gun) FSC 4930; Should Be Used Instead of MIL-C22587B, Which Was Cancelled on 30 August 1999
Aluminum Alloy Forgings, HeatTreated AREA FORG; Should Be Used Instead of MIL-A-22771D, Which
WasCancelled on 10 September 1999
Spray Kit, Self PressurizedFSC 4940; Should Be Used Instead of MIL-S-22805, Which Was Cancelled on
30August 1999
Paper, Recording, HeatSensitive FSC 7530; Should Be Used Instead of MIL-P-22968B(AS), Which
WasCancelled on 24 August 1999
Gages - Inspection for MS23002Crimping Dies (for Use with MS25036 Insulated Terminals) FSC 5220
Iron-Nickel Alloys for Sealingto Glasses and Ceramics Should Be Used Instead of MIL-I-23011C, Which
WasCancelled on October 5, 1998
Insulation Sleeving,Electrical, Heat Shrinkable, General Specification for FSC 5970; Should BeUsed Instead of
MIL-DTL-23053E, Which Was Cancelled on 16 September 19
Insulation Sleeving,Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible FSC5970; Should
Be Used Instead of MIL-DTL-23053/1C, Which Was Cancell
Insulation Sleeving,Electrical, Heat Shrinkable, Polyolefin, Dual-Wall, Outer Wall CrosslinkedFSC 5970;
Should Be Used Instead of MIL-DTL-23053/4D, Which Was Cancel
Straps, Clamps, and MountingHardware, Plastic and Metal for Cable Harness Tying and Support FSC
5975;Should Be Used for New Design Instead of MIL-S-23190, Which Was
Tapes, Pressure SensitiveAdhesive, for Masking During Paint Stripping Operations Should Be UsedInstead of
MIL-T-23397B, Which Was Cancelled on 21 September 1998
Indicator, Pressure, 11/2-Inch, Integrally Lighted FSC 6620; Should Be Used Instead ofMIL-I-23479B(1),
Which Was Cancelled on 16 August 1999
Insulation Sleeving,Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked FSC 5970;Should Be Used
Instead of MIL-DTL-23053/5C, Which Was Cancelled on 16 Se
Insulation Sleeving, Electrical,Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked FSC 5970; Should Be
UsedInstead of MIL-DTL-23053/6D, Which Was Cancelled on 16

Insulation Sleeving,Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked FSC5970;

Should Be Used Instead of MIL-DTL-23053/7C, Which Was Cancelle
Insulation Sleeving,Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, CrosslinkedFSC 5970;
Should Be Used Instead of MIL-DTL-23053/8C, Which Was Can
Aural Protector, Sound FSC4240; Should Be Used Instead of MIL-A-23899B(AS), Which Was Cancelled on
30August 1999
Fuse Holder, Block-Type, 1-,2-, and 3-Pole, 1- to 30- Ampere, Aircraft FSC 5920; Should Be Used Insteadof
MS24000F, Which Was Cancelled on 13 September 1999
Fuse Holder, Block-Type, 1-, 2-,and 3-Pole, 35- to 60- Ampere, Aircraft FSC 5920; Should Be Used Instead
ofMS24001F, Which Was Cancelled on 13 September 1999
Insulation Sleeving,Electrical, Heat Shrinkable, Silicone Rubber, Flexible FSC 5970; Should BeUsed Instead of
MIL-DTL-23053/10D, Which Was Cancelled on 16 September
Insulation Sleeving,Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-CrosslinkedFSC 5970;
Should Be Used Instead of MIL-DTL-23053/11C, Which Was Can
Insulation Sleeving,Electrical, Heat Shrinkable, Polytetrafluoroethylene FSC 5970; Should Be UsedInstead of
MIL-DTL-23053/12C, Which Was Cancelled on 16 September 1
Insulation Sleeving,Electrical, Heat Shrinkable, Fluoroelastomer, Flexible FSC 5970; Should BeUsed Instead
of MIL-DTL-23053/13B, Which Was Cancelled on 16 September
Insulation Sleeving,Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer,Semi-Rigid FSC
5970; Should Be Used Instead of MIL-DTL-23053/14B, Which
Insulation Sleeving,Electrical, Heat Shrinkable, Polyolefin, Heavy-Wall, Coated, Flexible, OuterWall
Crosslinked FSC 5970; Should Be Used Instead of MIL- DTL-23053/
Insulation Sleeving,Electrical, Heat Shrinkable, Crosslinked, Elastromeric Polyolefin, FlexibleFSC 5970;
Should Be Used Instead of MIL-DTL-23053/16B, Which Was Canc
Insulation Sleeving,Electrical, Heat Shrinkable, Flame Retarded, Modified Polyolefin, Flexible,Crosslinked
FSC 5970; Should Be Used Instead of MIL- DTL-23053/17B, W
Insulation Sleeving,Electrical, Heat Shrinkable, Modified Fluoropolymer, Crosslinked FSC 5970;Should Be
Used Instead MIL-DTL-23053/18B, Which Was Cancelled on 25 Fe
Insulation Sleeving,Electrical, Heat Shrinkable, Polyvinyl Chloride, Flexible Crosslinked andNon- Crosslinked
FSC 5970; Should Be Used Instead of MIL-I- 23053/2C, W
Straps, Clamps, and MountingHardware, Plastic for Cable Harness Tying and Support Clamp, Loop,
Nylon,Adjustable, Wire Support, Type III, Class 1 FSC 5340; Should Be
Straps, Clamps, Plastic andMetal, and Mounting Hardware, Plastic for Cable Harness Tying and SupportClamp,
Loop, Metal, Cushioned, Adjustable, Wire Support, Type V,
Straps, Clamps, and MountingHardware, Plastic and Metal for Cable Harness Tying and Support Strap,
Tiedown, Adjustable, Corrosion Resistant Steel Type VI, Class 1 F
Coupling Assembly, Hydraulic,Self-Sealing, Quick Disconnect, Flared Fitting to Internal Thread Boss
FSC4730; Should Be Used Instead of MS24333
Coupling Assembly, Hydraulic,Self-Sealing, Flareless Fitting to Internal Thread Boss FSC 4730; Should
BeUsed Instead of MS24334
Adapter, Flareless Tube toFlared Tube Precision Type FSC 4730; Should Be Used Instead of MS24405,
WhichWas Cancelled on 1 August 1999
Bearing, Roller, Needle-SingleRow, Heavy Duty, Self- Aligning, Type III, Antifriction, Inch FSC 3110

Bearing, Roller, Needle-DoubleRow, Heavy Duty, Self- Aligning, Type IV, Antifriction, Inch FSC 3110
Circuit Breaker - Aircraft,Trip-Free, Toggle, 5 Thru 15 AMP, Type I FSC 5925; Should Be Used Instead
ofMS24509K, Which Was Cancelled on 13 September 1999
Circuit Breaker - Aircraft,Trip-Free, Push-Pull, 5 Thru 15 AMP, Type I FSC 5925; Should Be Used Insteadof
MS24510K, Which Was Cancelled on 13 September 1999
Coupling Flangers, V-Band,Profile Dimensions for FSC 5340
Fixant, Hold Down FSC 4210;Should Be Used Instead of DOD-F-24610, Which Was Cancelled on 30
September1999
Elbow, Tube - 90 Degree,Bulkhead, Flareless Tube Universal to Flared Tube FSC 4730; Should Be
UsedInstead of MS24651, Which Was Cancelled on 2 August 1999
Elbow, Tube - 90 Degree,Bulkhead, Flared Tube, Universal to Flareless Tube FSC 4730; Should Be
UsedInstead of MS24652, Which Was Cancelled on 2 August 1999
Elbow, Tube - 45 Degree,Bulkhead, Flareless Tube Universal to Flared Tube FSC 4730; Should Be
UsedInstead of MS24654, Which Was Cancelled on 1 August 1999
Cable Assembly, ExternalElectric Power, Aircraft, 28 Volt DC, Jet Starting FSC 6150; Should Be UsedInstead
of MS25019G, Which Was Cancelled on 7 September 1999
Light Assembly, Cockpit, FixedFSC 6220; Should Be Used Instead of MS25027, Which Was Cancelled on
13September 1999
Terminal, Lug, Crimp Style,Copper, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1, (for 105Degrees
C Total Conductor Temperature) FSC 5940
Colors, Aeronautical Lightsand Lighting Equipment, General Requirements for FSC 6220; Should Be
UsedInstead of MIL-C-25050A(2), Which Was Cancelled on 13 September
Conduit, Flexible, RadioFrequency Shielding FSC 5975
Engines, Aircraft,Reciprocating, General Specification for FSC 2810; Should Be Used Instead ofMIL-E25109(AS), Which Was Cancelled on 07 September 1999
Link, Terminal, Connecting FSC5940; Should Be Used Instead of MS25226, which Was Cancelled on 31
August,1998
Clamp, Loop, Plastic, WireSupport FSC 5340; Should Be Used Instead of MS25281, Which Was Cancelled
on29 October 1999
Adhesive, Film Form, MetallicStructural Sandwich Construction FSC 8040
Cable Assemblies, ElectricPower, for Portable Ground Support Test Equipment
Glass, Monolithic, AircraftGlazing FSC 9340
Glass, Laminated, Aircraft GlazingFSC 9340; Should Be Used Instead of MIL-G-25871, Which Was Cancelled
on 28September 1999
Seal, Plain, Rubber, (-65 to +160 Degrees F Fuel Resistant), Mold in Groove FSC 5330
Seal, Plain, Rubber, SyntheticOil Resistant, (-65 to + 275 Degree F), Mold in Groove FSC 5330
Gasket, Rubber, FluidResistant, Oils, Synthetic Oils and Fuels, (-65 to + 400 Degrees F), Mold inGroove FSC
5330
Seal, Plain, Rubber, (Hot AirResistant 400 Degree F), Mold in Groove FSC 5330
Seal, Plain, Rubber, (-65 to +350 Degrees F Fuel Resistant), Mold in Groove FSC 5330
Terminal Board Assembly,Molded-In-Stud, Electric FSC 5940; Should Be Used Instead of MS27212,
whichWas Cancelled on 31 August, 1998

Bearing, Ball, Airframe,Anti-Friction, Heavy Duty

Bearing, Ball, Airframe,Anti-Friction, Intermediate Duty
Bearing, Ball, Airframe, ExtraLight Duty Should Be Used Instead of MS27642G, Which Was Cancelled on 23
July1998
Bearing, Ball, Airframe,Anti-Friction, Self-Aligning, Double Row, Heavy Duty
Bearing, Ball, Airframe,Anti-Friction, Double Row, Heavy Duty
Bearing, Ball, Airframe,Anti-Friction, Self-Aligning, Light and Heavy Duty FSC 3110; Should Be UsedInstead
of MS27645E, Which Was Cancelled on 23 July 1998
Bearing, Ball, Airframe,Anti-Friction, Extra Light Duty
Bearing, Ball, Airframe,Anti-Friction, Extra Wide, Double Row, Intermediate Duty FSC 3110; Should BeUsed
Instead of MS27467F, Which Was Cancelled on 23 July 1998
Bearing, Ball, Airframe,Anti-Friction, External Self Aligning, Extra Light Duty
Bearing, Ball, Airframe, Antifriction,Intermediate Duty
Coating, CorrosionPreventative, Polyurethane for Aircraft Integral Fuel Tanks for Use to 250Degrees F (121
Degrees C) FSC 8030
Packing, Preformed, ("DRing, Shock Strut) FSC 5330
Packing, Preformed, StraightThread Tube Fitting Boss FSC 5331
Bearing, Roller,Self-Aligning, Single Row Airframe, Anti-Friction, Sealed, Type I FSC 3110;Should Be Used
Instead of MS28912E, Which Was Cancelled on 02 September 1
Bearing, Roller,Self-Aligning, Double Row Airframe, Anti-Friction, Sealed, Type II FSC 3110;Should Be Used
Instead of MS28913D, Which Was Cancelled on 02 September
Bearing, Roller,Self-Aligning, Double Row Airframe, Anti-Friction, Sealed, Type III FSC 3110;Should Be
Used Instead of MS28914D, Which Was Cancelled on 02 September
Bearing, Roller,Self-Aligning, Double Row Torque Tube, Airframe, Anti-Friction, Sealed, TypeIV FSC 3110;
Should Be Used Instead of MS28915D, Which Was Concelled on
Packing, Preformed, HydocarbonFuel Resistant, Tube Fittings, "O" Ring FSC 5331
Packing, Preformed, HydocarbonFuel Resistant, "O" Ring FSC 5331
Hook, Filler Cap Chain FSC4030
Packing, Preformed,"O" Ring, Synthetic Lubricant Resistant FSC 5331
Cleaning Compounds, for PartsWashers and Spray Cabinets FSC 6850
Boots, Heat-Shrinkable,Strain-Relief, Straight FSC 5970
Boots, Heat-Shrinkable,Strain-Relief, Right Angle FSC 5970
Connector, Plug, Electric,Solder Type, Push-Pull Coupling Series 1 (Class E, P and J) FSC 5935

Gage Pin for Socket ContactEngagement Test

Circuit Breaker-Aircraft,Trip-Free, Push Pull, 1/2 Thru 20 Amps, Type I -55 Thru +121 Degrees C FSC5925;
Should Be Used Instead of MS3320N, Which Was Cancelled on 3
Contact Bushing, Electric,Wire Barrel FSC 5935; Should Be Used Instead of MS3348, Which Was
Inactivatedfor New Design on January 22, 1999
Fitting End, StandardDimensions for Flareless Tube Connection and Gasket Seal FSC 4730
Fitting End, StandardDimensions for Bulkhead Flareless Tube Connections FSC 4730; Should Be UsedInstead
of MS33515, Which Was Cancelled on 13 January 2000
Adapter, Aircraft, JackingPoint, Design and Installation of FSC 1730; Should Be Used Instead ofMS33559E,
Which Was Cancelled on 01 November 1999
Fittings, Installation ofFlareless Tube, Straight- Threaded Connectors FSC 4730; Should Be UsedInstead of
MS33566, Which Was Cancelled on 14 September 2000
Tubing End Double Flare,Standard Dimensions for FSC 4730
Tube Bend Radii
Strap, Tiedown, ElectricalComponents, Adjustable, Self-Clinching, Plastic, Type I, Class 1 FSC 5975;Should
Be Used for New Design Instead of MS3367, Which Was Inact
Strap, Tiedown, ElectricalComponents, Identification, Adjustable, Self-Clinching, Plastic, Type II,Class 1
Strip, Mounting, NutInsulating, for MS27212 Terminal Board
Packing, Preformed, StraightThread Tube Fitting Boss, Hydraulic, -65 Degrees F to +275 Degress F FSC 5330
Connectors, Receptacle,Electric, Wall Mounting, Front Release, Crimp Contact, AN Type FSC 5935;Should Be
Used for New Design Instead of MS3400, which Was Inactivate
Connector, Receptacle,Electric, Box Mounting, Front Release, Crimp Contact, AN Type with FSC 5935;Should
Be Used for New Design Instead of MS3402, Which Was Inactiv
Connectors, Receptacle,Electric, Wall Mounting, Front Release, Crimp Contact, AN Type - withAccessory
Threads FSC 5935; Should Be Used Instead of MS3412
Connectors, Receptacle,Electrical, Jam Nut Mounting, Rear Release Crimp Contact, AN Type FSC
5935;Should Be Used Instead of MS3454
Connector, Plug, Electrical,Self-Locking, Coupling Nut, Rear Release, Crimp Contact, AN Type FSC
5935;Should Be Used Instead of MS3459
Connector for Use with MS90362external Power Receptacle FSC 5935
Connector, Receptacle ExternalElectric Power, Aircraft, 28 Volt DC Operating Power FSC 5935
Gasket, Metallic, Encased,Annular, Copper FSC 5330
Connector, Air Duct Hose,Ground Cooling, Male FSC 4730
Connector, Air Duct Hose,Ground Cooling, Female FSC 4730
Packing, Preformed, Air DuctHose, Ground Cooling FSC 5330
Catch Assembly, Air Duct Hose,Ground Cooling FSC 4730
Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 160 Degrees F,Covered Pneumatic

Couplings, Hose, ReattachableScrew-On FSC 4730; Should Be Used Instead of MIL-C-38404E, Which
WasCancelled on 20 October 1999
Universal Joint, AntifrictionBearings FSC 3010; Should Be Used Instead of MIL-U-3963A, Which Was
Cancelledon 07 September 1999
Bearings, Roller, Needle,Airframe, Antifriction, Inch FSC 3110; Should Be Used Instead ofMIL-B-3990D(3),
Which Was Cancelled on 05 April 1999
Rod End - Threaded, AircraftFSC 5340; Should Be Used Instead of AN490, Which Was Cancelled on 30
June1999
Lights, Instrument,Individual, General Specification for FSC 6220; Should Be Used Instead ofMIL-L-5057F,
Which Was Cancelled on 7 September 1999
Wiring Aerospace Vehicle
Gasket, Rubber, Synthetic FSC5330
Stud, Locked In-Ring Locked,Serrated FSC 5307
Stud, Locked In-Ring,Serrated, High Strength FSC 5307
Fuse Holder, Block Type,Aircraft FSC 5920; Should Be Used Instead of MIL-F-5373, Which Was Cancelledon
31 August 1999
Splicing; Cable Terminal,Process for, Aircraft FSC 5130; Should Be Used Instead of MIL-S-5676, WhichWas
Cancelled on 29 October 1999
Circuit Breaker, Aircraft,Trip-Free Push Pull, Type I, Dual-Saftey, -55 Thru +121 Degrees C FSC 5925;Should
Be Used Instead of MIL-C-5809/1, Which Was Cancelled on
Terminals: Lug and Splice,Crimp Style, Aluminum, for Aluminum Aircraft Wire FSC 5940; Should Be
UsedInstead of MIL-T-7099, Which Was Cancelled on 27 September 1999
Pipe Threads, Taper,Aeronautical National Form, Symbol ANPT - Design and Inspection Standard FSC4730
Marking of ElectricalInsulating Materials FSC 6145; Should be Used for New Design Instead of MIL-M81531,Which Was Inactivated for New Design on September 30, 1998
Coatings, Cadmium, Tin-Cadmiumand Zinc (Mechanically Deposited) Should Be Used Instead of MIL-C81562B,Which Was Cancelled on 21 September 1998
Timer Assembly Rain RepellentFSC 6630; Should Be Used Instead of MIL-T-81587A(AS), Which Was
Cancelled on20 June 2000
Aluminum Foil for SandwichConstruction Should Be Used Instead of MIL-A-81596A, Which Was Cancelled
onOctober 5, 1998
Connectors, Electric,Circular, Miniature, Rack and Panel or Push-Pull Coupling, EnvironmentResisting FSC
5935; Should Be Used for New Design Instead of MIL-C- 81703
Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size
22,Series I FSC 5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size
20,Series I FSC 5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size
16,Series I FSC 5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size
12,Series I FSC 5940

Terminal Junction System, RackAssembly, Track Feedback Type, Series I FSC 5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size
22,Series I FSC 5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size
20,Series I FSC 5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size
16,Series I FSC 5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size
12,Series I FSC 5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Single, Series IFSC
5940
Terminal Junction System,Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Double, Series IFSC
5940
Plating, Tin-Lead(Electrodeposited)
Chemical Milling of Metals,Specification for
Bearings, Plain,Self-Aligning, Self-Lubricating, Low Speed Oscillation, General Specificationfor
Bearing, Plain, Self-Aligning,Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Outer Ring,
-65Degrees to 325 Degrees F
Bearing, Plain, Self-Aligning,Self-Lubricating, Lined Bore, Low Speed, Wide, Chamfered Outer Ring,
-65Degrees to 325 Degrees F
Bearing, Plain, Self-Aligning,Self-Lubricating, Lined Bore, Low Speed, Wide, Grooved Outer Ring,
-65Degrees to 325 Degrees F
Bearing, Plain, Self-Aligning,Self-Lubricating, Lined Bore, Low Speed, Narrow, Chamfered Outer Ring,
-65Degrees to 325 Degrees F
Wire, Electrical, SolderlessWrap, Insulated and Uninsulated, General Specification for
Wire, Electrical, SolderlessWrap, Polyethylene Terephthalate-Polyester Laminated Tape Insulation,
SilverCoated Solid Conductor FSC 6145; Should Be Used for New Desi
Wire, Electrical, SolderlessWrap, Extruded Polyvinyidene Fluoride (PVDF) Insulation, Silver Coated
SolidConductor FSC 6145; Should Be Used for New Design Instead of
Wire, Electrical, SolderlessWrap, Fluorocarbon Polyimide Tape and Polytetrafluoroethylene (PTFE)Insulation,
Silver Coated Solid Conductor FSC 6145; Should Be Used I
Splices, Electric, Permanent,Crimp Style, Copper, Insulated, Environment Resistant FSC 5940; Should BeUsed
Instead of MIL-S-81824, Which Was Cancelled on 31 August,
Splice, Electric, Permanent,Crimp Style Copper, Insulated, Environment Resistant, Class 1 FSC 5940;Should
Be Used Instead of MIL-T-81824/1, Which Was Cancelled on S
Heat Transfer Fluid,Fluorochemical FSC 6850; Should Be Used Instead of MIL-H-81829, Which
WasCancelled on 21 September 1999
Remover, Organic Coating, HotTank Type FSC 8010; Should Be Used Instead of MIL-R-81835(AS), Which
WasCancelled on 24 August 1999
Tubing, Plastic, Flexible,Convoluted, Conduit, General Specification for Should Be Used for New
DesignsInstead of MIL-T-81914, Which Was Inactivated for New Design

Tubing, Plastic, Flexible,Convoluted, Polytetrafluoroethylene, Standard Convolutions FSC 9330; ShouldBe

Used Instead of MIL-T-81914/1(AS), Which Was Inactivated for
Tubing, Plastic, ExtraFlexible, Convoluted, Polytetrafluoroethylene, Close Convolution FSC 9330;Should Be
Used Instead of MIL-T-81914/2(AS), which Was Inactivated f
Titanium and Titanium-AlloyCastings, Investment Should Be Used Instead of MIL-T-81915, Which
WasCancelled on 21 September 1998
Bearings, Sleeve, Plain andFlanged, Self-Lubricating, General Specification for
Bearing, Sleeve, Plain,Self-Lubricating, 325 Degrees F FSC 3120
Bearing, Sleeve, Flanged,Self-Lubricating, 325 Degrees F FSC 3120
Bearings, Plain, Rod End,Self-Aligning, Self- Lubricating, General Specification for
Tubing, Plastic, Flexible,Convoluted, Fluorinated Ethylene Propylene, Standard Convolution FSC 9330;Should
Be Used Instead of MIL-T-81914/3(AS), Which Was Inactivat
Tubing, Plastic, ExtraFlexible, Convoluted, Fluorinated Ethylene Propylene, Close ConvolutionShould Be
Used Instead of MIL-T-81914/4, Which Was Cancelled on Decembe
Tubing, Plastic, ExtraFlexible, Convoluted, Ethylene- Tetrafluoroethylene, Close Convolution ShouldBe Used
Instead of MIL-T-81914/5, Which Was Cancelled on December
Tubing, Plastic, Flexible,Convoluted, Ethylene- Tetrafluoroethylene, Standard Convolution FSC 9330;Should
Be Used Instead of MIL-T-81914/6(AS), Which Was Inactivate
Bearing, Plain, Rod End,Self-Aligning, Self- Lubricating, Wide, Externally Threaded, -65 Degrees F to+325
Degrees F FSC 3120
Bearing, Plain, Rod End,Self-Aligning, Self- Lubricating, Wide, Internally Threaded, -65 Degrees F to+325
Degrees F FSC 3120
Locking Devices (for Rod EndBearings) FSC 5340
Bearing, Plain, Rod End,Self-Aligning, Self- Lubricating, Narrow, Externally Threaded, -65 Degrees Fto +325
Degrees F FSC 3120
Tubing, Plastic, Flexible,Convoluted, Fluorinated Ethylene Propylene, Integral Braid FSC 5975; ShouldBe
Used Instead of MIL-T-81914/7(AS), Which Was Inactivated for
Bearing, Plain, Rod End,Self-Aligning, Self- Lubricating, Narrow, Internally Threaded, -65 Degrees Fto +325
Degrees F FSC 3120
Bearings, Plain,Self-Aligning, (BeCu Ball, CRES Race) General Specification for FSC 3120
Bearing, Plain, Self-Aligning,Be Cu Ball, CRES Race (with Stacking Groove) -65 to +350 Degrees F FSC
3120
Bearing, Plain, Self-Aligning,Be Cu Ball, CRES Race, - 65 to +350 Degrees F FSC 3120
Core Material, PlasticHoneycomb, Nylon Paper Base; for Aircraft Structural Applications Should BeUsed
Instead of MIL-C-81986, Which Was Cancelled on December 18, 19
Coatings, Polyurethane, RainErosion Resistant for Exterior Aircraft and Missile Plastic Parts FSC 8010
Inspection Process, MagneticRubber

Coating System, Polyurethane,Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective FSC 8010
Shield Termination, SolderStyle, Insulated, Heat- Shrinkable, Environment Resistant GeneralSpecification for
FSC 5940; Should Be Used for New Design Instead of MILShield Termination, SolderStyle, Insulated, Heat- Shrinkable, Environment Resistant for Cables HavingTin or
Silver Plated Shields (Class I) FSC 5940; Should Be Used
Shield Termination, SolderStyle, Insulated, Heat- Shrinkable, Environment Resistant with Pre InstalledLeads
for Cables Having Tin or Silver Plated Shields (Class I)
Tie down Assembly, HelicopterBlade, General Specification for FSC 1730; Should Be Used Instead ofMIL-T85075A(AS), Which Was Cancelled on 26 May 2000
Fittings, Tube, Fluid Systems,Separable, Beam Seal, 3000/4000 psi, General Specification for FSC 4730
Fittings, Tube, Fluid Systems,Separable, High Pressure, Dynamic Beam Seal, General Specification for
FSC4730
Fittings, Tube, Fluid Systems,Separable, High Pressure, Dynamic Beam Seal, Design Standard for Male End
FSC4730
Cap, Dust, Plastic, ElectricConnector FSC 5340; To be Used Instead of MS 90376E
Nut - Hex, Boss Connection,Cres FSC 5310
Bolt, Machine-Double HexagonExtended Washer Head, Close Tolerance Shank, AMS 5731, .190-32 UNJF-3A
FSC5306
Bolt, Machine-Double HexagonExtended Washer Head, Close Tolerance Shank, AMS 5731, .250-28 UNJF-3A
FSC5306
Bolt, Machine-Steel, 12 PointHead .375-24, Black Oxide FSC 5306
Pin, Straight, Headless,Steel, Oversize FSC 5315
Bolt-Machine, Steel, Drilled12 Point Head, .190(NO.10)-32, Black Oxide FSC 5306
Bolt-Machine, Steel, Drilled12 Point Head, .250-28, Black Oxide FSC 5306
Bolt-Machine, Steel, Drilled12 Point Head, .3125-24, Black Oxide FSC 5306
Bolt-Machine, Steel, Drilled12 Point Head, .375-24, Black Oxide FSC 5306
Nut, Plain, Hex, BossConnection, Aluminum FSC 5310
Screw - Flat Fillister Head,.190-32 FSC 5305

Screw, Machine - Steel, FlatFillister Head, .250-28 FSC 5305

Screw - Flat Fillister Head,.3125-24 FSC 5305

Screw - Flat Fillister Head,Drilled Shank, .190-32 FSC 5305

Screw - Flat Fillister Head,Drilled Shank, .250-28 FSC 5305

Screw - Flat Fillister,Drilled Head, .190-32 FSC 5305

Screw - Flat Fillister,Drilled Head, .250-20 FSC 5305

Screw - Flat Fillister,Drilled Head, .250-28 FSC 5305

Screw - Flat Fillister,Drilled Head, .3125.18 FSC 5305

Screw - Flat Fillister,Drilled Head, .3125-24 FSC 5305

Screw - Flat Fillister,Drilled Head, .375-16 FSC 5305

Screw - Flat Fillister,Drilled Head, .375-24 FSC 5305

Screw - Oval Fillister Head,.112-40 FSC 5305

Screw - Oval Fillister Head,.138.32 FSC 5305

Screw - Oval Fillister Head,.164-32 FSC 5305

Screw - Oval Fillister DrilledHead, .164-32 FSC 5305

Nut & Plain FSC 5310

Pin, Straight, Headed - .125Nom. FSC 5315

Pin, Straight, Headed - .187Nom. FSC 5315

Pin, Straight, Headed - .250Nom. FSC 5315

Pin, Straight, Headed - 312NOM. FSC 5315

Pin, Straight, Headed - 375NOM. FSC 5315

Pin, Straight, Headed - .500Nom. FSC 5315

Pin, Straight, Headless, SteelFSC 5315

Clamp - Loop Type Support(Heat Resistant) .204 Hole FSC 5340

Gasket - Aluminum - NonAsbestos, Annular FSC 5330

Rivet and Universal Head, HighTemperature, AMS 7229 FSC 5320

Rivet, Solid, Universal Head,AMS 7232 FSC 5320

Rivet, Solid, 100 Degree FlushHead, AMS 7229 FSC 5320

Rivet, Solid, 100 Degree FlushHead, AMS 7232 FSC 5320

Rivet - 100 Degree CountersunkHead, Corrosion Resistant Steel FSC 5320

Rivet-100 Degree CountersunkHead, Mild Steel R(1982)

Rivet - 100 DegreesCountersunk Head, Aluminum Alloy R(1991)

Rivet - Universal Head,Corrosion Resistant Steel FSC 5320

Rivet - Universal Head, MildSteel FSC 5320

Rivet-Universal Head, AluminumAlloy R(1991)

Stud - Straight, .3125-18 X.3125-24 FSC 5307

Stud - Straight, .375-16 X.375-24 FSC 5307

Stud - Straight, Necked,.375-16 X .375-24 FSC 5307

Stud - Straight, Necked,.4375-16 X .4375-20 FSC 5307

Stud - Straight, Drilled,.250-20 x .250-28 FSC 5307

Stud - Straight, Drilled,.3125-18 x .3125-24 FSC 5307

Stud - Straight, Drilled,.3125-18 X .3125-24 FSC 5307

Pin-Lock, Steel FSC 5315

Pin-Lock, Brass FSC 5315

Nut - Hex, Check FSC 5310

Stud, Stepped, 1.5 DiaEngagement, .250-20 X .190-32 FSC 5307

Stud, Stepped, 1.5 DiaEngagement, .3125-18 X .250-28 FSC 5307

Stud, Stepped, 1.5 DiaEngagement, .4375-14 x .375-24 FSC 5307

Stud-Stepped, 1.5 DiaEngagement, .500-13 x .4372-20 FSC 5307

Stud, Stepped, Drilled, 1.5Dia Engagement, .250-20 X .190-32 FSC 5307

Stud, Stepped, Drilled, 1.5Dia Engagement, .3125-18 X .250-28 FSC 5307

Stud, Stepped, Drilled, 1.5Dia Engagement, .375-16 x .3125-24

Stud, Stepped, 2 DiaEngagement .250-20 X .190-32 FSC 5307

Stud, Stepped, 2 DiaEngagement, .3125 X .250-28 FSC 5307

Stud, Stepped, 2 DiaEngagement, .375-16 X .3125-24 FSC 5307

Stud-Stepped, 2 DiaEngagement, .500-13 X .4375-20 FSC 5307

Stud-Stepped, Necked, 1.5 DiaEngagement, .4375-14 X .375-24 FSC 5307

Stud, Stepped, Drilled,Necked, 2 Dia Engagement, .4375 X .375-24 FSC 5307

(Withdrawn) Doors, Dutch,Recommended Standard *NOT CURRENT DOCUMENT

(Withdrawn) Recommended LouverDetails for Standard Steel Doors *NOT CURRENT DOCUMENT
(Withdrawn) Doors and Frames,Standard, Steel, Recommended Door, Frame and Hardware Schedule for
*NOTCURRENT DOCUMENT
(Withdrawn) RecommendedWeatherstripping for Standard Steel Doors and Frames *NOT CURRENT
DOCUMENT

(Withdrawn) Doors and Frames,Standard, Steel, Recommended Completed Opening Anchors *NOT
CURRENT DOCUMENT
(Withdrawn) Doors and Frames,Standard, Steel, Recommended Standard Preparation for Double
Type(Interconnected) Locks on *NOT CURRENT DOCUMENT
Hardware on Steel Doors(Reinforcement- Application)
Doors, Steel, Frames, Details,Recommended Standard
Kitchen Equipment FabricationGuidelines First Edition
Seismic Restraint ManualGuidelines for Mechanical Systems Second Edition
(Discontinued) PaintSpecification No. 1 Red Lead and Raw Linseed Oil Primer (Steel StructuresPainting
Manual, Ch 4 - Paint Specs.)
Surface PreparationSpecifications Surface Preparation Commentary (Steel Structures PaintingManual, Ch 2 Surface Preparation Specs.)
(Discontinued) PaintSpecification No. 2 Red Lead, Iron Oxide, Raw Linseed Oil and Alkyd Primer(Steel
Structures Painting Manual, Ch 4 - Paint Specs.)
(Discontinued) PaintSpecification No. 13 Red or Brown One-Coat Shop Paint (Steel StructuresPainting
Manual, Ch 4 - Paint Specs.)
Shop, Field, and MaintenancePainting (Steel Structures Painting Manual, Ch 5 - Paint Application Specs.)
Three-Coat Oil Base Zinc OxidePainting System (Without Lead or Chromate Pigment) (Steel Structures
PaintingManual, Ch 3 - Painting System Specs.)
Solvent Cleaning (SteelStructures Painting Manual, Ch 2 - Surface Preparation Specs.)
Visual Standard for AbrasiveBlast Cleaning Steel (Standard Reference Photographs) (Steel StructuresPainting
Manual, Ch 2 - Surface Preparation Specs.)
Measurement of Dry CoatingThickness with Magnetic Gages (Steel Structures Painting Manual, Ch 5 PaintApplication Specs.)
Hand Tool Cleaning (SteelStructures Painting Manual, Ch 2 - Surface Preparation Specs.)
Guide to Standard Method ofEvaluating Degree of Rusting on Painted Steel Surfaces (Steel StructuresPainting
Manual, Ch 2 - Surface Preparation Specs.)
Guide to Safety in PaintApplication (Steel Structures Painting Manual, Ch 5 - Paint ApplicationSpecs.)
Power Tool Cleaning (SteelStructures Painting Manual, Ch 2 - Surface Preparation Specs.)
Guide to MaintenanceRepainting with Oil Base or Alkyd Painting Systems (Steel Structures PaintingManual,
Ch 5 - Paint Application Specs.)
Painting System SpecificationNo. 4.01 Four-Coat Vinyl Painting System with Red Lead Primer (for Salt
Wateror Chemical Use) (Steel Structures Painting Manual, Ch 3 Four-Coat Vinyl PaintingSystem (For Fresh Water, Chemical, and Corrosive Atmospheres) (SteelStructures
Painting Manual, Ch 3 - Painting System Specs.)
Zinc Dust, Zinc Oxide, andPhenolic Varnish Paint (Steel Structures Painting Manual, Ch 4 - PaintSpecs.)
Joint Surface PreparationStandard White Metal Blast Cleaning NACE No. 1: 1999 (Steel StructuresPainting
Manual, Ch 2 - Surface Preparation Specs.)
Joint Surface PreparationStandard Commercial Blast Cleaning NACE No. 3: 1999 (Steel StructuresPainting
Manual, Ch 2 - Surface Preparation Specs.)

Joint Surface PreparationStandard Brush-Off Blast Cleaning NACE No. 4: 2000 (Steel Structures
PaintingManual, Ch 2 - Surface Preparation Specs.)
Aluminum Vinyl Paint (SteelStructures Painting Manual, Ch 4 - Paint Specs.)
Pickling (Steel StructuresPainting Manual, Ch 2 - Surface Preparation Specs.)
White (or Colored) Vinyl Paint(Steel Structures Painting Manual, Ch 4 - Paint Specs.)
Hot-Applied Coal Tar EnamelPainting System (Steel Structures Painting Manual, Ch 3 - Painting
SystemSpecs.)
Joint Surface PreparationStandard Near-White Metal Blast Cleaning NACE No. 2: 1999 (Steel
StructuresPainting Manual, Ch 2 - Surface Preparation Specs.)
Red Iron Oxide, Zinc Chromate,Raw Linseed Oil and Alkyd Primer (Steel Structures Painting Manual, Ch 4
-Paint Specs.)
Black (or Dark Red) Coal TarEpoxy-Polyamide Painting System (Steel Structures Painting Manual, Ch 3
-Painting System Specs.)
Power Tool Cleaning to BareMetal
One-Coat Zinc-Rich PaintingSystem (Steel Structures Painting Manual, Ch 3 - Painting System Specs.)
Epoxy-Polyamide PaintingSystem (Steel Structures Painting Manual, Ch 3 - Painting System Specs.)
Steel Joist Shop PaintingSystem (Steel Structures Painting Manual, Ch 3 - Painting System Specs.)
Steel Joist Shop Paint Type I,Red Oxide Paint Type II, Asphalt Coating (Steel Structures Painting Manual,Ch 4
- Paint Specs.)
Coal Tar Epoxy-Polyamide Black(or Dark Red) Paint (Steel Structures Painting Manual, Ch 4 - Paint Specs.)
Zinc-Rich Primers (Type I,"Inorganic," and Type II, "Organic") (Steel StructuresPainting Manual, Ch 4 - Paint
Specs.)
Epoxy-Polyamide Paints(Primer, Intermediate, and Topcoat) (Steel Structures Painting Manual, Ch 4 -Paint
Specs.)
Basic Zinc Chromate-VinylButyral Wash Primer (Steel Structures Painting Manual, Ch 4 - Paint Specs.)
Aluminum Alkyd Paint Leafing(Type I) and Non-Leafing (Type II) (Steel Structures Painting Manual, Ch 4
-Paint Specs.)
FOTP-35 Fiber Optic ComponentDust (Fine Sand) Test R(1999)
UL Standard for Safety SurfaceMetal Raceways and Fittings Twelfth Edition; Reprint with Revisions
Throughand Including October 2,2000
UL Standard for SafetyFlexible Metal Conduit Tenth Edition
UL Standard for Safety ManualSignaling Boxes for Fire Alarm Systems Seventh Edition; Reprint
withRevisions Through and Including June 12, 2001
UL Standard for SafetyThermoset-Insulated Wires and Cables Fifteenth Edition; Reprint withRevisions
Through and Including May 14, 2001; Announcement Bulletins Dated
UL Standard for SafetyFlexible Nonmetallic Tubing for Electric Wiring Tenth Edition

UL Standard for Safety ArmoredCable Fourteenth Edition; Reprint with Revisions Through and
Including12/14/2001; Bulletins Dated 12/22/1999 (55p), 08/16/2000 (2p)
UL Standard for Safety forPanelboards Eleventh Edition; Contains Revisions Through and IncludingJanuary
12,2000
UL Standard for Safety RigidMetal Conduit - Steel Twelfth Edition
UL Standard for SafetyThermoplastic-Insulated Wires and Cables Twelfth Edition; Reprint withRevisions
Through and Including 5/4/2001; Announcement Bulletins Dated 0
UL Standard for Safety Testfor Flammability of Plastic Materials for Parts in Devices and AppliancesFifth
Edition; Reprinted with Revisions Through and Including 05
UL Standard for Safety FireTests of Window Assemblies Seventh Edition; Reprint with Revisions Throughand
Including August 31, 2000
UL Standard for SafetyTin-Clad Fire Doors Twentieth Edition; Reprint with Revisions Through andIncluding
07/15/1998
UL Standard for Safety FireTests of Door Assemblies Ninth Edition
UL Standard for Safety TubeFittings for Flammable and Combustible Fluids, Refrigeration Service, andMarine
Use Sixth Edition; Reprint with Revisions Through and Inc
UL Standard for SafetyCompressed Gas Regulators Seventh Edition; Reprint with Revisions Through
andIncluding June 1, 2001
UL Standard for Safety Door,Drapery, Gate, Louver, and Window Operators and Systems Fourth
Edition;Reprint with Revisions Through and Including June 11, 2001
UL Standard for SlidingHardware for Standard, Horizontally Mounted Tin-Clad Fire Doors EighthEdition;
Reprint with Revisions Through and Including July 14, 2000
UL Standard for SafetySwinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and inPairs
Seventh Edition
UL Standard for Safety Wire Connectorsand Soldering Lugs for Use with Copper Conductors Ninth Edition;
Reprint withRevisions Through and Including May 23, 2001
UL Standard for Safety WireConnectors for Use with Aluminum Conductors Fourth Edition; Reprint
withRevisions Through and Including May 23, 2001
UL Standard for SafetyProtectors for Paired Conductor Communications Circuits Seventh Edition;Reprint with
Revisions Through and Including May 21, 2001
UL Standard for SafetyMetallic Outlet Boxes Ninth Edition; Reprint with Revisions Through andIncluding
June 4, 2001
UL Standard for SafetyNonmetallic Outlet Boxes, Flush- Device Boxes, and Covers Third Edition;Reprint with
Revisions Through and Including June 4, 2001
UL Standard for Safety LinedFire Hose and Hose Assemblies Eleventh Edition; May 23, 1996
UL Standard for SafetyPolymeric Materials - Short Term Property Evaluations Fifth Edition
UL Standard for SafetyPolymeric Materials - Long Term Property Evaluations Third Edition; Reprintwith
Revisions Through and Including 11/29/2000
UL Standard for SafetyPolymeric Materials - Use in Electrical Equipment Evaluations Fourth Edition;Reprint
with Revisions Through and Including 06/12/2001
UL Standard for SafetyPolymeric Materials - Fabricated Parts Sixth Edition; Reprint with RevisionsThrough
and Including 06/14/2000
UL Standard for SafetyPolymeric Materials - Industrial Laminates, Filament Wound Tubing, VulcanizedFibre,
and Materials Used in Printed-Wiring Boards Third Edition;

UL Standard for SafetyGeneral-Use Snap Switches Twelfth Edition; CSA-C22.2 No. 111 Third Edition
UL Standard for SafetyPrinted-Wiring Boards Eighth Edition; Reprint with Revisions Through andIncluding
02/27/2001
UL Standard for SafetyTemperature-Indicating and - Regulating Equipment Eleventh Edition; Reprintwith
Revisions Through and Including 5/4/2001
UL Standard for SafetyMicrowave Cooking Appliances Fourth Edition; Reprint with Revisions Throughand
Including 07/20/1998
UL Standard for SafetyEmergency Lighting and Power Equipment Eighth Edition; Reprint with
RevisionsThrough and Including 03/02/2001
UL Standard for SafetyFluorescent-Lamp Ballasts Tenth Edition
UL Standard for SafetyHousehold Electric Coffee Makers and Brewing-Type Appliances Fifth Edition;Reprint
with Revisions Through and Including May 4, 2001
UL Standard for SafetyIntermediate Metal Conduit Third Edition; Reprint with Revisions Through
andIncluding May 31, 2001
UL Standard for SafetyTransient Voltage Surge Suppressors Second Edition; Reprint with RevisionsThrough
and Including 06/06/2001
UL Standard for SafetyReference Standard for Electrical Wires, Cables, and Flexible Cords ThirdEdition;
Reprint with Revisions Through and Including 05/14/2001; Bul
UL Standard for Safety MetalWaste Cans Fifth Edition; Reprint with Revisions Through and
Including7/16/1999
UL Standard for Safety HeatResponsive Links for Fire- Protection Service Sixth Edition; Reprint
withRevisions Through and Including 9/2/1999
UL Standard for SafetyPortable Electric Tools Eighth Edition; Reprint with Revisions Through andIncluding
January 5, 2000 (National Fire Codes, vol. 2)
UL Standard for SafetyEnclosures for Electrical Equipment Eleventh Edition; Reprint with RevisionsThrough
and Including 11/19/1999
UL Standard for Safety SteelUnderground Tanks for Flammable and Combustible Liquids Ninth
Edition;Reprint with Revisions Through and Including 07/27/1998
UL Standard for SafetyFlexible Cord and Fixture Wire Sixteenth Edition; Reprint with RevisionsThrough and
Including 03/13/2001; Announcement Bulletin Dated 10/30/19
UL Standard for Safety forPanelboards Eleventh Edition; Contains Revisions Through and IncludingJanuary
12,2000; Bulletins Dated 03/17/2000 (8p), 09/20/2000 (12p),
UL Standard for Safety SepticTanks, Bituminous Coated Metal Sixth Edition; May 13, 1996
UL Standard for SafetyMotor-Operated Appliances Eighth Edition; Reprint with Revisions Through
andIncluding 11/09/1998
UL Standard for Safety SteelTanks for Oil-Burner Fuel Tenth Edition; This Standard Contains
RevisionsThrough and Including July 30, 1999
UL Standard for SafetyPower-Operated Dispensing Devices for Petroleum Products Tenth Edition;Reprint with
Revisions Through and Including 10/02/1998
UL Standard for Safety FireExtinguisher and Booster Hose Tenth Edition; Contains Reprint with
RevisionsThrough and Including 02/29/2000
UL Standard for SafetyLightning Protection Components Fourth Edition; Reprint with RevisionsThrough and
Including 01/06/2000

UL Standard for SafetyInstallation Requirements for Lightning Protection Systems Tenth Edition;Reprint with
Revisions Through and Including 07/08/1998
UL Standard for SafetyEnclosed and Dead-Front Switches Twelfth Edition; Reprint with RevisionsThrough
and Including 06/16/1998
UL Standard for SafetyFactory-Built Chimneys for Residential Type and Building Heating AppliancesNinth
Edition; Reprint with Revisions Through and Including 3/17/19
UL Standard for Safety forOxy-Fuel Gas Torches Tenth Edition
UL Standard for SafetyElectric Heating Pads Eleventh Edition; Reprint with Revisions Through andIncluding
06/19/2000
UL Standard for Safety SteelAboveground Tanks for Flammable and Combustible Liquids Seventh
Edition;Reprint with Revisions Through and Including 07/22/1998; Bulleti
UL Standard for SafetyHand-Held Torches for Fuel Gases Fifth Edition; Containa Revisions Throughand
Including 03/17/2000
UL Standard for SafetyPortable Electric Lamps Eleventh Edition; Reprint with Revisions Through
andIncluding 09/29/2000; Bulletins Dated 12/17/1999 (176p)
UL Standard for SafetyCarbon-Dioxide Fire Extinguishers Eighth Edition; Reprint with RevisionsThrough and
Including 03/30/2000
UL Standard for Safety forHousehold Electric Storage Tank Water Heaters Tenth Edition; Reprint
withRevisions Through and Including 10/06/1999
UL Standard for SafetyFactory-Made Air Ducts and Connectors Ninth Edition; Reprint with RevisionsThrough
and Including 12/14/1998
UL Standard for Safety ClosureSystems for Use with Flexible Air Ducts and Air Connectors First
Edition;Reprint with Revisions Through and Including May 18,2000
UL Standard for Safety X-RayEquipment Seventh Edition; Reprint with Revisions Through and
Including07/09/1999; Announcement Bulletins Located at the End of the Stan
UL Standard for SafetyCommercial Electric Cooking Appliances Eighth Edition; Reprint with
RevisionsThrough and Including 4/10/2000
UL Standard for SafetyHigh-Interrupting-Capacity Fuses, Current-Limiting Types Fifth Edition;Reprint with
Revisions Through and Including February 25, 1998
UL Standard for Safety Class RFuses Fourth Edition; Revision July 13, 1988
UL Standard for Safety Class TFuses Fourth Edition; November 9, 1993
UL Standard for SafetyRefrigerant-Containing Components and Accessories, Nonelectrical SixthEdition;
Reprint with Revisions Through and Including 10/29/1997
UL Standard for SafetyCellular Metal Floor Raceways and Fittings Eighth Edition
UL Standard for Safety Testsfor Flame-Propagation of Fabrics and Films Sixth Edition
UL Standard for Safety DoorClosers-Holders, with or without Integral Smoke Detectors Fourth Edition;Reprint
with Revision 01/21/1999 Included
UL Standard for SafetyHydrants for Fire-Protection Service Seventh Edition; Reprint with RevisionsThrough
and Including 12/15/1998
UL Standard for SafetyHousehold Refrigerators and Freezers Tenth Edition; CAN/CSA-C22.2 NO. 6393;Reprint with Revisions Through and Including 08/25/2000
UL Standard for Safety GateValves for Fire-Protection Service Seventh Edition; Reprint with
RevisionsThrough and Including 12/17/1998
UL Standard for Safety OilBurners Ninth Edition; Reprint with Revisions Through and Including09/08/1998

UL Standard for SafetyPortable Electric Hand Lamps Fourth Edition; Reprint with Revisions Throughand
Including 09/16/1998
UL Standard for Safety DryChemical Fire Extinguishers Ninth Edition; Reprint with Revisions Through
andIncluding 03/30/2000
UL Standard for Safety CheckValves for Fire- Protection Service Eighth Edition; September 9, 1996
UL Standard for Safety Hoseand Hose Assemblies for Dispensing Flammable Liquids Sixth Edition;
Reprintwith Revisions Through and Including 2/1/2000
UL Standard for Safety Pumpsfor Oil-Burning Appliances Eighth Edition; Reprint with Revisions Through
andIncluding 12/22/1999
UL Standard for Safety LimitControls Fifth Edition; Reprint with Revisions Through and Including04/30/2001
UL Standard for SafetyLiquid-Tight Flexible Steel Conduit Fourth Edition; Reprint with RevisionsThrough and
Including 10/17/1997
UL Standard for Safety PrimarySafety Controls for Gas- and Oil-Fired Appliances Fifth Edition; Reprint
withRevision Through and Including 09/01/2000; Bulletins Date
UL Standard for Safety DraftEquipment Third Edition; Reprint with Revisions Through and
Including05/22/1998
UL Standard for SafetyDrinking Water Coolers Sixth Edition; Reprint with Revisions Through andIncluding
12/01/1998
UL Standard for SafetyPortable Spray Hose Nozzles for Fire-Protection Service Third Edition;Reprint with
Revisions Through and Including 12/15/1998
UL Standard for Safety Gauges,Indicating Pressure, for Compressed Gas Service Sixth Edition;Reprint
withRevisions Through and Including 12/21/1999
UL Standard for SafetyRefrigeration Unit Coolers Third Edition; Reprint with Revisions Through andIncluding
11/10/1998
UL Standard for Safety MeterSockets Seventh Edition
UL Standard for SafetyRefrigerating Units Third Edition; Reprint with Revisions Through andIncluding
10/30/1998
UL Standard for SafetyElectrically Operated Valves Fifth Edition; Reprint with Revisions Throughand
Including 12/6/2000
UL Standard for Safety WasteDisposers Fifth Edition; Reprint with Revisions Through and Including3/29/2001
UL Standard for Safety KeyLocks Seventh Edition
UL Standard for Safety GasVents Ninth Edition; Reprint with Revisions Through and Including 12/30/1999
UL Standard for Safety Groundingand Bonding Equipment Seventh Edition; Reprint with Revisions Through
andIncluding 02/09/2001; Announcement Bulletins Dated 1/14/199
UL Standard for SafetyCommercial Refrigerators and Freezers Eighth Edition; Reprint with RevisionsThrough
and Including 04/27/1998
UL Standard for SafetyDehumidifiers Seventh Edition; Reprint with Revisions Through and
Including03/31/1998
UL Standard for Safety RoomAir Conditioners Seventh Edition; Reprint with Revisions Through and
Including2/24/1999
UL Standard for SafetySplicing Wire Connectors Fourth Edition

UL Standard for SafetyMolded-Case Circuit Breakers, Molded-Case Switches, and Circuit-BreakerEnclosures

Ninth Edition; Reprint with Revisions Through and Including
UL Standard for SafetyEdison-Base Lampholders Eleventh Edition; Reprint with Revisions Through
andIncluding 4/11/2000
UL Standard for SafetyProtectors for Data Communications and Fire Alarm Circuits Third Edition
UL Standard for SafetyAttachment Plugs and Receptacles Thirteenth Edition; Reprint with RevisionsThrough
and Including 01/21/1999
UL Standard for SafetyElectric Heating Appliances Twelfth Edition; Reprint with Revisions Throughand
Including 07/17/1998
UL Standard for SafetySpecialty Transformers Twelfth Edition
UL Standard for SafetyElectric Fans Ninth Edition
UL Standard for SafetyIndustrial Control Equipment Seventeenth Edition; Reprint with RevisionsThrough and
Including 01/22/2001
UL Standard for SafetyPolyvinyl Chloride, Polyethylene, and Rubber Insulating Tape Seventh Edition;Reprint
with Revisions Through and Including 04/01/1998
UL Standard for SafetyPorcelain Cleats, Knobs, and Tubes Sixth Edition; Reprint with Revision07/28/1998
Included
UL Standard for SafetyFuseholders Tenth Edition; Reprint with Revisions Through and Including3/18/1999
UL Standard for SafetyMetallic Outlet Boxes Ninth Edition; Reprint with Revisions Through andIncluding
12/20/1999
UL Standard for SafetyFittings for Cable and Conduit Fourth Edition; Reprint with Revisions Throughand
Including October 21,1998; Bulletins Dated 8/20/1999 (4p), 12
UL Standard for Safety HeatDetectors for Fire Protective Signaling Systems Seventh Edition
UL Standard for SafetyLampholders, Starters, and Starter Holders for Fluorescent Lamps EighthEdition
UL Standard for Safety Medicaland Dental Equipment Fourth Edition; Reprint with Revisions Through
andIncluding 7/9/1999; Announcement Bulletins Located at the End o
UL Standard for Safety FireDampers Sixth Edition; Reprint with Revisions Through and Including10/27/2000
UL Standard for Safety SmokeDampers Fourth Edition; Reprint with Revisions Through and
Including10/27/2000
UL Standard for SafetyIndustrial Trucks, Internal Combustion Engine-Powered Ninth Edition; Reprintwith
Revisions Through and Including 09/02/1998
UL Standard for Safety Floor-FinishingMachines Fifth Edition; Reprint with Revisions Through and
Including12/16/1998
UL Standard for SafetyElectric Oil Heaters Seventh Edition
UL Standard for Safety Testsfor Uplift Resistance of Roof Assemblies Fourth Edition; Reprint withRevisions
Through and Including 02/06/1998
UL Standard for SafetyHigh-Efficiency, Particulate, Air Filter Units Eighth Edition; Reprint withRevisions
Through and Including 8/2/1999
UL Standard for Safety IceCream Makers Fifth Edition; Revisions Through and Including March 27, 2000
UL Standard for SafetyConnectors and Switches for Use with Burglar-Alarm Systems Eighth Edition
UL Standard for Safety HoldupAlarm Units and Systems Tenth Edition;; Reprint with Revision Through
andIncluding 3/30/2001

UL Standard for SafetyIntrusion-Detection Units Seventh Edition; Reprint with Revisions Through
andIncluding 3/29/1999
UL Standard for SafetyContainer Assemblies for LP-Gas Eighth Edition
UL Standard for SafetySchedule 40 and 80 Rigid PVC Conduit Sixth Edition; Reprint with RevisionsThrough
and Including 10/16/1998
UL Standard for Safety Type EBand A Rigid PVC Conduit and HDPE Conduit Fourth Edition
UL Standard for SafetyCommercial Dry-Cleaning Machines (Type IV) Fourth Edition; Reprint withRevisions
Through and Including 03/11/1998
UL Standard for SafetyElectric Motors and Generators for Use in Division 1 Hazardous (Classified)Locations
Third Edition; Reprint with Revisions Through and Includi
UL Standard for SafetyInstallation and Classification of Burglar and Holdup Alarm SystemsThirteenth Edition;
Reprint with Revisions Through and Including 01/19/2001
UL Standard for Safety Burglary-ResistantSafes Thirteenth Edition
UL Standard for SafetyIndustrial Control Equipment for Use in Hazardous (Classified) LocationsTwelfth
Edition; Reprint with Revisions Through and Including 3/15/199
UL Standard for Safety PowerVentilators Fifth Edition; Reprint with Revisions Through and
Including02/08/1999
UL Standard for Safety ExhaustHoods for Commercial Cooking Equipment Fifth Edition; Reprint with
RevisionsThrough and Including 4/14/1999
UL Standard for Safety FireExtinguishers, Rating and Fire Testing of Fifth Edition; Reprint withRevisions
Through and Including 3/30/1999
UL Standard for SafetyNonmetallic-Sheathed Cables Tenth Edition; Reprint with Revisions Through
andIncluding 02/28/2001
UL Standard for Safety Testfor Surface Burning Characteristics of Building Materials Eighth Edition;Reprint
with Revision 12/24/1998 Included
UL Standard for SafetyOil-Fired Boiler Assemblies Seventh Edition; Reprint with Revisions Throughand
Including 01/26/2001
UL Standard for SafetyOil-Fired Central Furnaces Eighth Edition; Reprint with Revisions Through
andIncluding 01/18/1999
UL Standard for SafetyOil-Fired Unit Heaters Fifth Edition; Reprint with Revision 01/19/1999Included
UL Standard for SafetyOil-Fired Storage Tank Water Heaters Fifth Edition; Reprint with RevisionsThrough and
Including 01/19/1999
UL Standard for SafetyHousehold Dishwashers Seventh Edition; CSA C22.2 No. 167-97; Reprint
withRevisions Through and Including 2/22/1999
UL Standard for SafetyBullet-Resisting Equipment Tenth Edition
UL Standard for SafetyMotor-Operated Commercial Food Preparing Machines Third Edition
UL Standard for Safety CombinationLocks Seventh Edition
UL Standard for Safety Plug-InLocking Type Photocontrols for Use with Area Lighting Fourth Edition;
Reprintwith Revisions Through and Including 10/17/2000
UL Standard for Safety forNonindustrial Photoelectric Switches for Lighting Control Fourth Edition;Reprint
with Revisions Through and Including 10/14/1999
UL Standard for SafetyMotor-Operated Water Pumps Third Edition; Reprint with Revisions Through
andIncluding 09/28/2000
UL Standard for SafetyElectrically Conductive Floorings Seventh Edition; January 23, 1997

UL Standard for SafetyPortable Electric Lighting Units for Use in Hazardous (Classified) LocationsSixth
Edition; Reprint with Revisions Through and Including 3/15/1
UL Standard for SafetyElectric Flashlights and Lanterns for Use in Hazardous (Classified) LocationsFifth
Edition; This Standard Contains Revisions Through and Inclu
UL Standard for SafetyKey-Locked Safes (Class KL) Sixth Edition
UL Standard for SafetyIndicator Posts for Fire- Protection Service Ninth Edition; Includes Reprintwith
Revisiions Through and Including 03/01/2000
UL Standard for Safety Testsfor Fire Resistance of Roof Covering Materials Seventh Edition; Reprint
withRevisions Through and Including 07/24/1998
UL Standard for SafetyCommercial-Industrial Gas Heating Equipment Fifth Edition
UL Standard for SafetyElectrical Metallic Tubing Seventh Edition
UL Standard for Safety Cord Setsand Power-Supply Cords Eleventh Edition
UL Standard for Safety Valvesfor Flammable Fluids Eighth Edition; Reprint with Revisions Through
andIncluding 10/28/1999
UL Standard for SafetyElectric Lighting Fixtures for Use in Hazardous (Classified) LocationsEleventh Edition;
Reprint with Revisions Through and Including 3/16/1999
UL Standard for Safety MotorControl Centers Fourth Edition; Reprint with Revisions Through and
IncludingMay 17,2000
UL Standard for Safety Service-EntranceCables Tenth Edition; Reprint with Revisions Through and Including
04/17/2001
UL Standard for Safety BuswaysTwelfth Edition
UL Standard for SafetyHousehold Electric Ranges Fourteenth Edition; Reprint with Revisions Throughand
Including 4/28/2000
UL Standard for SafetyTime-Indicating and -Recording Appliances Seventh Edition; Reprint withRevisions
Through and Including December 14,2000
UL Standard for Safety ControlUnits for Fire- Protective Signaling Systems Eighth Edition; Reprint
withRevisions Through and Including 3/30/1999
UL Standard for SafetyElectrostatic Air Cleaners Fourth Edition
UL Standard for SafetyReference Standard for Service Equipment Third Edition
UL Standard for SafetyWireways, Auxiliary Gutters, and Associated Fittings Seventh Edition; Reprintwith
Revisions Through and Including 8/20/1999
UL Standard for SafetyUnderfloor Raceways and Fittings Tenth Edition
UL Standard for Safety OutletBoxes and Fittings for Use in Hazardous (Classified) Locations Tenth
Edition;Reprint with Revisions Through and Including 4/13/1999
UL Standard for SafetyDead-Front Switchboards Tenth Edition
UL Standard for SafetySwitches for Use in Hazardous (Classified) Locations Seventh Edition; Reprintwith
Revisions Through and Including 8/4/99
UL Standard for Safety AirFilter Units Sixth Edition; Reprint with Revisions Through and Including10/4/1999
UL Standard for Safety Testfor Flame-Propagation and Smoke-Density Values for Electrical andOptical-Fiber
Cables Used in Spaces Transporting Environmental Air Fifth
UL Standard for Safety EnergyManagement Equipment Third Edition; Announcement Bulletin Dated
03/06/1996Located at the End of the Standard

UL Standard for SafetyCommercial Electric Dishwashers Fifth Edition; Reprint with Revisions Throughand
Including 3/16/2000
UL Standard for SafetyGround-Fault Circuit- Interrupters Third Edition; Reprint with RevisionsThrough and
Including 09/18/2000
UL Standard for Safety FusedPower-Circuit Devices Fourth Edition; Reprint with Revisions Through
andIncluding 3/22/1999
UL Standard for SafetyHermetic Refrigerant Motor- Compressors Seventh Edition
UL Standard for SafetyStationary and Fixed Electric Tools Sixth Edition; Reprint with RevisionsThrough and
Including 09/14/2000
UL Standard for Safety WindResistance of Prepared Roof Covering Materials Fifth Edition; Reprint
withRevision Through and Including 07/22/1998
UL Standard for SafetyHumidifiers Third Edition; Bulletin June 14, 1994 (CSA-C22.2 No. 104-93)Third
Edition; CSA-C22.2 No. 104-93
UL Standard for SafetyElectric Motors Fifth Edition; Reprint with Revisions Through and Including02/07/2001
UL Standard for SafetyTransfer Switch Equipment Fifth Edition; Reprint with Revisions Through andIncluding
02/12/1999
UL Standard for SafetyReceptacle-Plug Combinations for Use in Hazardous (Classified) LocationsSixth
Edition; Reprint with Revisions Through and Including 3/16/1999
UL Standard for Safety PowerUnits Other Than Class 2 Sixth Edition; Reprint with Revisions Through
andIncluding May 24,2000
UL Standard for Safety VacuumCleaners, Blower Cleaners, and Household Floor Finishing Machines
FifthEdition; CAN/CSA C22.2 No. 243-M91; Reprint with Revisions Throu
UL Standard for SafetyHigh-Intensity-Discharge Lamp Ballasts Fifth Edition; Reprint with RevisionsThrough
and Including 02/07/2001
UL Standard for SafetySheathed Heating Elements Sixth Edition; Reprint with Revisions Through
andIncluding 10/12/2000
UL Standard for SafetyBurglary-Resistant Electric Locking Mechanisms Fifth Edition
UL Standard for SafetyElectric Baseboard Heating Equipment Fourth Edition; Reprint with RevisionsThrough
and Including 09/09/1998
UL Standard for SafetyGround-Fault Sensing and Relaying Equipment Sixth Edition
UL Standard for SafetyElectrically Conductive Equipment and Materials for Use in FlammableAnesthetizing
Locations Third Edition
UL Standard for SafetyProprietary Burglar Alarm Units and Systems Fifth Edition; Reprint withRevisions
Through and Including 02/01/1999
UL Standard for SafetySupplementary Protectors for Use in Electrical Equipment Fifth Edition
UL Standard for SafetyHousehold Trash Compactors Fourth Edition; Reprint with Revisions Through
andIncluding 12/1/1999
UL Standard for SafetyHalogenated Agent Fire Extinguishers Fifth Edition; Reprint with RevisionsThrough
and Including March 24, 2000
UL Standard for SafetyFloating Waterlights Third Edition
UL Standard for Safety ElectricCommercial Clothes- Washing Equipment Third Edition; Reprint with
RevisionsThrough and Including May 24, 2000

UL Standard for Safety BatteryChargers for Charging Engine-Starter Batteries Fifth Edition; Reprint
withRevisions Through and Including 3/31/99
UL Standard for SafetyElectrical and Electronic Measuring and Testing Equipment Fourth
Edition;Announcement Bulletins Dated 06/05/1996 and 03/06/1998 Located at the
UL Standard for SafetyLaboratory Equipment Third Edition; Reprint with Revisions Through andIncluding
03/15/2000
UL Standard for SafetyElectromagnetic Interference Filters Fourth Edition
UL Standard for SafetyGlass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum
Products,Alcohols, and Alcohol-Gasoline Mixtures Second Edition; April
UL Standard for SafetyAcross-the-Line, Antenna Coupling and Line-by-Pass Capacitors for RadioandTelevision- Type Appliances Sixth Edition; Both Fifth and Sixth Ed
UL Standard for SafetyAcross-the-Line, Antenna Coupling and Line-by-Pass Capacitors for RadioandTelevision- Type Appliances Fifth Edition; Reprint with Revision 0
UL Standard for SafetyElectrical Analog Instruments - Panel Board Types Third Edition
UL Standard for Safety FireTests of Through- Penetration Firestops Second Edition; Reprint withRevisions
Through and Including 08/24/2000
UL Standard for SafetyInsect-Control Equipment - Electrocution Type Third Edition
UL Standard for SafetyMetal-Clad Cables Third Edition; Reprint with Revisions Through and
Including4/12/2001
UL Standard for SafetyFluorescent Lighting Fixtures Fourth Edition; Reprint with Revisions Throughand
Including 11/23/1999
UL Standard for SafetyIncandescent Lighting Fixtures Fourth Edition; Reprint with Revisions Throughand
Including 11/23/1999; Bulletins Dated 07/28/2000 (9p)
UL Standard for Safety HighIntensity Discharge Lighting Fixtures Fourth Edition; Reprint with
RevisionsThrough and Including 11/24/1999
UL Standard for SafetyCentral-Station Burglar-Alarm Units Third Edition
UL Standard for Safety Testfor Flame Propagation Height of Electrical and Optical-Fiber Cables
InstalledVertically in Shafts Fourth Edition
UL Standard for SafetyHigh-Pressure Cleaning Machines Second Edition; Reprint with RevisionsThrough and
Including February 8, 2001
UL Standard for Safety Safetyof Information Technology Equipment, Including Electrical Business
EquipmentSecond Edition; Reprint with Revisions Through and Includin
UL Standard for Safety Heatingand Cooling Equipment Second Edition; CAN/CSA C22.2 NO. 236-95; Reprint
withRevisions Through and Including 08/31/1999
UL Standard for Safety Safetyon Information Technology Equipment Third Edition; CAN/CSA-C22.2
No.60950-00; Announcement Bulletin Dated 7/23/1999 is Located at the End
(Withdrawn) Minimum Performanceand Safety Requirements for Components and Systems of ContinuousFlowAnesthesia Machines for Human Use Includes Correction January-1
(Withdrawn) Humidifiers andNebulizers for Medical Use
(Withdrawn) Requirements forOxygen Analyzers for Monitoring Patient Breathing- Mixtures
(Withdrawn) Personnel Protection- Protective Headwear for Industrial Workers - Requirements Revised
toISEA/ANSI-1996
(Withdrawn) Emergency Eyewash andShower Equipment Revised to ISEA Z358.1-1998

(Withdrawn) Method of Measurementand Calibration of Upright Cylindrical Tanks ASTM D1220; ANSI
Z11.197;R(1992)
Method for the Calibration ofMicrophones R(1986)
(Withdrawn) Safety Requirementsfor Window Cleaning
(Withdrawn) Addenda to A39.1 -1995 Safety Requirements for Window Cleaning
(Withdrawn) Addenda to A39.1 -1995 Safety Requirements for Window Cleaning
(Withdrawn) Cast Copper AlloySolder Joint Fittings for Sovent Drainage Systems
(Withdrawn) Gauges - PressureIndicating Dial Type - Elastic Element Special Notice - 1992; Superseded
byB40.100-1998
(Withdrawn) Procedures forTesting Pallets Superseded by MH1-1997
(Withdrawn) DigitalRepresentation for Communication of Product Definition Data
Tapered and Reduced Cross SectionRetaining Rings (Inch Series) Incorporating ASME B18.27.1,
B18.27.2,B18.27.3, B18.27.4, and B18.27.5; Addenda A - 1999; Addenda B Standard Specification for Carbon Steel Tee Rails
Standard Specification for Steel Castings, Carbon, for GeneralApplication R(2000)
Standard Specification for Carbon Structural Steel
Standard Specification for Ferritic Malleable Iron Castings
Standard Specification for Gray Iron Castings E1-1998
Standard Specification for Steel Tie Plates, Low- Carbon andHigh-Carbon-Hot-Worked
Standard Specification for Steel Wire, Plain, for ConcreteReinforcement E1-2001; AASHTO No.: M 32
Standard Test Method for Weight [Mass] of Coating on Iron andSteel Articles with Zinc or Zinc-Alloy Coatings
Standard Specification for Carbon Steel Forgings for PipingApplications
Standard Specification for Seamless Carbon Steel Pipe forHigh-Temperature Service E1-1999
Standard Specification for Steel Bars, Carbon, Cold- Finished,Standard Quality
Standard Specification for Metallic-Coated, Steel- Woven WireFence Fabric
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings onIron and Steel Products
Standard Specification for Steel Springs, Helical, Heat-TreatedE1-1996
Standard Specification for Gray Iron Castings for Valves,Flanges, and Pipe Fittings R(2001)
Standard Specification for Pipe, Steel, Electric- Fusion(Arc)-Welded (Sizes NPS 16 and over)
Standard Specification for Electric-Fusion (Arc)- Welded SteelPipe (NPS 4 and Over)
Standard Practice for Safeguarding Against Embrittlement ofHot-Dip Galvanized Structural Steel Products and
Procedure for DetectingEmbrittlement R(1999)
Standard Specification for Zinc Coating (Hot-Dip) on Iron andSteel Hardware AASHTO No.: M232

Standard Specification for Automotive Gray Iron Castings R(2001)

Standard Specification for Stainless and Heat- ResistingChromium-Nickel Steel Plate, Sheet, and Strip
Standard Specification for Stainless and Heat- ResistingChromium Steel Plate, Sheet, and Strip
Standard Specification for Carbon Steel Forgings, forGeneral-Purpose Piping
Standard Specification for Forged or Rolled Alloy- Steel PipeFlanges, Forged Fittings, and Valves and Parts for
High-Temperature Service
Standard Specification for Carbon Steel Track Bolts and Nuts
Standard Specification for Steel Welded Wire Fabric, Plain, forConcrete Reinforcement
Standard Specification for Alloy-Steel and Stainless SteelBolting Materials for High-Temperature Service

Standard Specification for Carbon and Alloy Steel Nuts for Boltsfor High Pressure or High Temperature
Service, or Both
Standard Specification for Cupola Malleable Iron
Standard Specification for Pressure Vessel Plates, Alloy Steel,Nickel
Standard Specification for Pressure Vessel Plates, Alloy Steel,Molybdenum R(1999)
Standard Specification for Seamless Ferritic and AusteniticAlloy-Steel Boiler, Superheater, and HeatExchanger Tubes
Standard Specification for Electric-Resistance-Welded CarbonSteel Heat-Exchanger and Condenser Tubes
Standard Specification for Steel Castings, Carbon, Suitable forFusion Welding, for High-Temperature Service
R(1998)
Standard Specification for Steel Castings, Martensitic Stainlessand Alloy, for Pressure-Containing Parts,
Suitable for High-Temperature Service
Standard Specification for Pearlitic Malleable Iron
Standard Specification for Steel Wire, Cold-Drawn for MechanicalSprings
Standard Specification for Steel Wire, Music Spring Quality
Standard Specification for Steel Wire, Oil-Tempered Carbon ValveSpring Quality
Standard Specification for Chromium-Vanadium Alloy Steel SpringWire
Standard Specification for Chromium-Vanadium Alloy Steel ValveSpring Quality Wire
Standard Practice for Locating the Thinnest Spot in a Zinc(Galvanized) Coating on Iron or Steel Articles
R(1999)

Standard Specification for High-Strength Low-Alloy StructuralSteel AASHTO No.: M 161

Standard Test Method for Evaluating the Microstructure ofGraphite in Iron Castings R(1998)
Standard Specification for Welded Austenitic Steel Boiler,Superheater, Heat-Exchanger, and Condenser Tubes
Standard Specification for Welded and Seamless Steel Pipe PilesE1-2000
Standard Specification for Copper-Brazed Steel Tubing
Standard Practices for Detecting Susceptibility to IntergranularAttack in Austenitic Stainless Steels
Standard Specification for Nickel and Nickel-Base Alloy-CladSteel Plate R(1999)
Standard Specification for Seamless and Welded Ferritic andMartensitic Stainless Steel Tubing for General
Service
Standard Specification for Stainless Steel Bars and Shapes
Standard Specification for Low and Intermediate Tensile StrengthCarbon Steel Plates
Standard Specification for High-Carbon Anti-Friction Bearing Steel
Standard Specification for Pressure Vessel Plates, Alloy Steel,Manganese-Molybdenum and ManganeseMolybdenum-Nickel E1-1999
Standard Specification for Carbon Steel Bolts and Studs, 60 000psi Tensile Strength
Standard Specification for Steel Sheet, Terne (Lead- Tin Alloy)Coated by the Hot-Dip Process
Standard Test Method for Weight and Composition of Coating onTerne Sheet by the Triple-Spot Test
Standard Specification for Stainless Steel Spring Wire
Standard Specification for Stainless Steel Billets and Bars forForging
Standard Specification for Alloy/Steel Bolting Materials forLow-Temperature Service
Standard Specification for Steel Bars, Alloy, Standard GradesR(1996)
Standard Specification for Structural Bolts, Steel, HeatTreated, 120/105 ksi Minimum Tensile Strength
AASHTO No.: M 164
Standard Specification for High-Strength Bolts for StructuralSteel Joints (Metric)
Standard Test Methods for Impact Testing of Cast Irons R(1997)
Standard Specification for Steel Sheet Piling AASHTO No.: M 202
Standard Specification for Seamless and Welded Steel Pipe forLow-Temperature Service
Standard Specification for Seamless Ferritic Alloy- Steel Pipefor High-Temperature Service
Standard Specification for Alloy Steel Forgings for Pressure andHigh-Temperature Parts E1-2000
Standard Test Methods for Permeability of Feebly MagneticMaterials

Standard Specification for Castings, Austenitic,Austenitic-Ferritic (Duplex), for Pressure-Containing Parts

Used in USDOE-NEStandards
Standard Specification for Steel Castings, Ferritic andMartensitic, for Pressure-Containing Parts, Suitable for
Low-TemperatureService R(1998)
Standard Specification for Quenched and Tempered Alloy SteelBolts, Studs, and Other Externally Threaded
Fasteners
Standard Specification for Commercial Steel (CS) Sheet, Carbon,(0.15 Maximum Percent) Cold-Rolled E11998
Standard Practice for Cleaning, Descaling, and Passivation ofStainless Steel Parts, Equipment, and Systems E12000
Standard Practice for Providing High-Quality Zinc Coatings(Hot-Dip)
Standard Specification for Pressure Vessel Plates, Alloy Steel,Chromium-Molybdenum E1-2001
(Withdrawn) Airframe Ball, Rollerand Needle Roller Bearings Metric Design R(1994)
(Withdrawn) Airframe Ball, Rollerand Needle Roller Bearings Inch Design
Nut, Self-Locking, Plate, Fixed, One Lug, Steel, Reduced RivetSpacing, Low Height, CBore, 1100 MPa,
Metric, 235 Degrees C Revision 2; FSC5310
Nut, Self-Locking, Plate, Fixed, One Lug, Cres, Reduced RivetSpacing, Low Height, CBore, 900 MPa, Metric,
235 Deg C and 425 Deg C Revision2; FSC 5305
Nut, Self-Locking, Plate, Fixed, Two Lug, Steel, Reduced RivetSpacing, Low Height, CBore, 1100 MPa,
Metric, 235 Deg C Revision 2; FSC 5310
Nut, Self-Locking, Plate, Fixed, Two Lug, Cres, Reduced RivetSpacing, Low Height, CBore, 900 MPa, Metric,
235 Deg C, and 425 Deg CRevision 2; FSC 5310
Nut, Self-Locking, Plate, Fixed, Corner, Steel, Reduced RivetSpacing, Low Height, CBore, 1100 MPa, Metric,
235 Deg C Revision 2; FSC 5310
Nut, Self-Locking, Plate, Fixed, Corner, Cres, Reduced RivetSpacing, Low Height, CBore, 900 MPa, Metric
235 Deg C and 425 Deg C Revision2; FSC 5310
Nut, Self-Locking, Plate, Fixed, Side by Side, Steel, ReducedRivet Spacing, Low Height, CBore, 1100 MPa,
Metric 235 Deg C Revision 2; FSC5310
Nut, Self-Locking, Plate, Fixed, Side by Side, Cres ReducedRivet Spacing, Low Height, CBore, 900 MPa,
Metric 235 Deg C and 425 Deg CRevision 2; FSC 5310
Nut, Self-Locking, Plate, Corner, Steel, Low Height, CBore, 1100MPa, Metric, 235 Deg C, Revision 2; FSC
5310
Nut, Self-Locking, Plate, Corner, Cres, Low Height, CBore, 900MPa, Metric 235 Deg C and 425 Deg C
Revision 2; FSC 5310
(Cancelled) Flushness Gage and Stylus for 100 Degree CountersunkFlush Fasteners Cancelled After March
31,2001; Superseded by NAS 9800;Revision 4; FSC GP53 R(1992)
(Cancelled) Inspection Procedure for Flush Fasteners CancelledAfter March 31,2001; Superseded by NAS
9800; Revision 4 R(1992)
(Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive
for Design AfterDecember 31,1976. See NAS 1790 for Descri
(Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive
for Design AfterDecember 31,1976. See NAS 1790 for Descri

(Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive
for Design AfterDecember 31,1976. See NAS 1790 for Descri
(Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive
for Design AfterDecember 31,1976. See NAS 1790 for Descri
(Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive
for Design AfterDecember 31,1976. See NAS 1790 for Descri
(Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive
for Design AfterDecember 31,1976. See NAS 1790 for Descri
(Inactive for Design) Bolt, Flat Pan Head Full Thread Inactivefor Design After December 31,1976. See NAS
1100 and NAS 1216 for Descriptionof Status Notes See NAS 38
(Inactive for Design) Bolt, 100 Degree Flush Tension Head FullThread Inactive for Design After December
31,1976. See NAS 1102 and NAS 1219for Description of Status
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Bolt - Clevis FSC 5306
Stud, Self-Clinching General Specification for FSC 5307
Bolt - Clevis FSC 5306
(Cancelled) Ladders - PortableWood - Safety Requirements
Specifications for Mercury LampsSupplement C78.40a- 1998
(Withdrawn) Roadway LightingEquipment - Luminaire Attachments IEEE C136-1994;Revised and
Redesignated toDraft IEEE C136.3-1995

(Withdrawn) Roadway LightingEquipment - Locking-Type Photocontrol Devices and Mating Receptacles

-Physical and Electrical Interchangeability and Testing Revised and
(Withdrawn) Roadway Lighting -Metal Brackets for Wood Poles IEEE C136-1994
Photography (Optics) -Photographic Lenses - Measurement Method for Distribution of IlluminancePIMA;
Revision and Redesignation of ANSI PH3.22-1979 (R1992)
(Withdrawn) Photography (Films) -Films in Rolls for Recording Instruments and Miscellaneous Uses Dimensions
(Withdrawn) Photography (Film) -16mm, 35mm, 70mm, and 105mm Spools for Still-Picture Cameras Dimensions
(Withdrawn) Method for MeasuringTemperature of Photographic Equipment *NOT CURRENT DOCUMENT
R(1988)
(Withdrawn) Photography (Cameras)- Tripod Connections for American Cameras (1/4-Inch-20 Thread)
R(1987)
(Withdrawn) Focal Length Markingsof Lenses R(1986)
(Withdrawn) Photography(Processing) - Black-And-White Films, Plates, and Papers - Manual
ProcessingMethods R(1990)
(Withdrawn) Information Systems -Unrecorded Helical- Scan Digital Computer Tape Cartridge for
InformationInterchange - 3.81 mm (0.150 in)
Standard Specification for Steel Castings, Alloy, SpeciallyHeat-Treated, for Pressure-Containing Parts, Suitable
for High-TemperatureService R(1998)
Standard Specification for Ferritic Ductile Iron Pressure-RetainingCastings for Use at Elevated Temperatures
Standard Specification for Wrought Austenitic Stainless SteelPiping Fittings

Standard Specification for Zinc-Coated (Galvanized) Low-CarbonSteel Armor Wire

Standard Specification for Carbon Steel Chain
Standard Specification for Uncoated Stress-Relieved Steel Wirefor Prestressed Concrete AASHTO No.: M 204

Standard Specification for Steel, Sheet, for Porcelain Enameling

Standard Test Method for Weight (Mass) of Coating onAluminum-Coated Iron or Steel Articles
Standard Specification for Steel Bars, Alloy, Hot- Wrought orCold-Finished, Quenched and Tempered R(2000)
Standard Specification for Austenitic Gray Iron Castings E1-1997R(1997)
Standard Specification for Austenitic Ductile Iron CastingsR(1999)
Standard Specification for Quenched and Tempered Steel Bolts andStuds
Standard Specification for Steel Sheet, Aluminum- Coated, by theHot-Dip Process
Standard Specification for Zinc-Coated Steel Wire Strand
Standard Specification for Chromium-Nickel Stainless SteelWeaving and Knitting Wire

Standard Specification for Stainless Steel Bars and Shapes forUse in Boilers and Other Pressure Vessels
Standard Specification for General Requirements for Flat-RolledStainless and Heat-Resisting Steel Plate,
Sheet, and Strip
Standard Specification for General Requirements for StainlessSteel Bars, Billets, and Forgings
Standard Specification for High Hardenability AntifrictionBearing Steel
Standard Specification for Steel Castings Suitable for PressureService R(1998)
Standard Practice for Steel Castings, Welding, Qualifications ofProcedures and Personnel
Standard Specification for Carbon Steel Lifting Eyes
Standard Specification for Heat-Treated Steel Structural Bolts,150 ksi Minimum Tensile Strength AASHTO
No.: M 253
Standard Specification for Stainless Steel Wire and Wire Rodsfor Cold Heading and Cold Forging R(2000)
Standard Specification for Castings, Nickel and Nickel Alloy
Standard Specification for Steel Wire, Deformed, for ConcreteReinforcement E1-2001
Standard Specification for Steel Welded Wire Fabric, Deformed,for Concrete Reinforcement E1-2001
Standard Specification for Steel Bars and Shapes, Carbon Rolledfrom "T" Rails E1-1997 R(1997)
(Withdrawn) Standard Specification for Steel Structural RivetsAASHTO No.: M 228
Standard Specification for Alloy and Structural Alloy Steel,Sheet and Strip, Hot-Rolled and Cold-Rolled
Standard Specification for Quenched and Tempered Vacuum-TreatedCarbon and Alloy Steel Forgings for
Pressure Vessels R(1999)
Standard Specification for General Requirements for Wire Rodsand Coarse Round Wire, Carbon Steel
Standard Specification for General Requirements for Wire Rodsand Coarse Round Wire, Carbon Steel (Metric)
Standard Specification for Seamless Stainless Steel MechanicalTubing
Standard Specification for Cold-Drawn Buttweld Carbon SteelMechanical Tubing
Standard Specification for Electric-Resistance-Welded Carbon andAlloy Steel Mechanical Tubing
Standard Specification for High-Yield-Strength, Quenched andTempered Alloy Steel Plate, Suitable for
Welding AASHTO No.: M244
Standard Specification for Pressure Vessel Plates, Alloy Steel,High-Strength, Quenched and Tempered R(1999)
Standard Specification for Corrosion-Resistant High- SiliconIron Castings
Standard Specification for Seamless Carbon and Alloy SteelMechanical Tubing
(Withdrawn) Standard Specification for SupplementaryRequirements for Seamless and Electric-ResistanceWelded Carbon SteelTubular Products for High- Temperature Ser
Standard Specification for Abrasion-Resistant Cast Irons E1-1999R(1999)

Standard Specification for Pressure Vessel Plates, Alloy Steel,Quenched and Tempered, ManganeseMolybdenum and Manganese-Molybdenum-NickelR(1999)
Standard Specification for Carburizing Steels for Anti- FrictionBearings
(Withdrawn) Standard Specification for Special-Quality Ball andRoller Bearing Steel R(1992)
Standard Specification for Ductile Iron Castings E1- 1999R(1999)
Standard Specification for Pressure Vessel Plates, Heat-Treated,Carbon-Manganese-Silicon Steel R(2000)
Standard Specification for General Requirements for StainlessSteel Wire and Wire Rods
Standard Practice for Macroetch Testing of Tool Steel BarsR(1999)
Standard Specification for Carbon and Alloy Steel Nuts
Standard Specification for Carbon and Alloy Steel Nuts (Metric)
Standard Specification for Hot-Rolled and Cold- FinishedAge-Hardening Stainless Steel Bars and Shapes
Standard Specification for Martensitic Stainless Steel Bars,Forgings, and Forging Stock for High-Temperature
Service
Standard Specification for Steel, Sheet, Carbon, andHigh-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled,
General Requirementsfor
(Discontinued) Standard Specification for Steel, Carbon (0.15Maximum, Percent), Hot-Rolled Sheet and Strip
Commercial
Standard Specification for Structural Steel, Sheet and Strip,Carbon, Hot-Rolled
Standard Specification for Alloy Steel Socket-Head Cap Screws
Standard Specification for Steel Bars, Carbon, Merchant Quality,M-Grades
Standard Specification for Steel Bars, Carbon, Hot- Wrought,Special Quality R(2000)
Standard Specification for Straight-Beam Ultrasonic Examinationof Plain and Clad Steel Plates for Special
Applications R(2001)
Standard Specification for Stainless Steel Wire
Standard Specification for Free-Machining Stainless Steel Wireand Wire Rods R(2000)

Standard Specification for Zinc-Coated Parallel and HelicalSteel Wire Structural Strand and Zinc-Coated Wire
for Spun-In-PlaceStructural Strand
Standard Specification for Seamless and Welded Carbon SteelWater-Well Pipe
Standard Specification for Steel Sheet, ElectrolyticZinc-Coated, for Light Coating Weight (Mass) Applications
Standard Specification for Steel Tubes, Low-Carbon, Tapered forStructural Use
Standard Specification for Cast Tool Steel R(1999)
Standard Specification for Zinc-Coated Steel Structural WireRope

Standard Specification for Steel, Sheet and Strip,High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with
ImprovedAtmospheric Corrosion Resistance
Standard Specification for Structural Steel (SS), Sheet, Carbon,Cold-Rolled
Standard Specification for Drawing Steel (DS), Sheet, Carbon,Cold-Rolled
Standard Specification for Drawing Steel (DS), Sheet and Strip,Carbon, Hot-Rolled
Standard Specification for Tin Mill Products, GeneralRequirements
Standard Specification for Tin Mill Products, GeneralRequirements (Metric)
Standard Specification for Tin Mill Products, Electrolytic TinPlate, Single Reduced
Standard Specification for Tin Mill Products, Black Plate,Single-Reduced
Standard Specification for Tin Mill Products, Electrolytic TinPlate, Double Reduced
Standard Specification for Homogeneous Tool-Resisting Steel Barsfor Security Applications
Standard Test Methods for Determination of Tin Coating Weightsfor Electrolytic Tin Plate
Standard Specification for Normalized High-Strength Low-AlloyStructural Steel Plates

Standard Specification for Steel, Sheet and Strip,Heavy-Thickness Coils, Carbon, Hot-Rolled
Standard Specification for Zinc-Coated (Galvanized) Carbon SteelWire
Standard Terminology Relating to Iron Castings
Standard Specification for Commercial Steel (CS), Sheet andStrip, Carbon (0.16 Maximum to 0.25 Maximum
Percent), Hot-Rolled
Standard Specification for Steel Bars, Carbon, Merchant Quality,Mechanical Properties R(2000)
Standard Specification for Annealed or Cold-Worked AusteniticStainless Steel Sheet, Strip, Plate, and Flat Bar
Standard Specification for Steel Bars, Carbon, Hot- Wrought,Special Quality, Mechanical Properties R(2000)

Standard Specification for Tool Steels Alloy R(1999)

Standard Specification for Steel, Strip, High-Carbon,Cold-Rolled, General Requirements for
Standard Specification for Steel, Strip, High-Carbon,Cold-Rolled R(1998)
Standard Specification for Tool Steel, Carbon R(1999)
(Withdrawn) Standard Specification for High-Strength NonheadedSteel Bolts and Studs

Standard Specification for High-Strength Low-Alloy Steel H-Pilesand Sheet Piling for Use in Marine
Environments
Standard Specification for Precipitation-Hardening Stainless andHeat-Resisting Steel Plate, Sheet, and Strip
R(1999)
Standard Specification for Steel Bars, Carbon, Hot- Wrought,Special Quality, for Fluid Power Applications E11995 R(1995)
Standard Specification for Steel Bars, Carbon, Hot- Wrought orCold-Finished, Special Quality, for Pressure
Piping Components R(2000)
Standard Practices for Packaging, Marking, and Loading Methodsfor Steel Products for Domestic Shipment
E1- 2000
Standard Specification for Steel Castings, General Requirements,for Pressure-Containing Parts
Standard Specification for Steel Forging Stock E1-1997 R(1996)
Standard Specification for Steel Bars, Alloy, Hot- Wrought, forElevated Temperature or Pressure- Containing
Parts, or Both R(2000)
Standard Specification for Hardware Cloth (Woven or Welded GalvanizedSteel Wire Fabric)
Standard Specification for Steel Sheet, Metallic Coated andPolymer Precoated for Corrugated Steel Pipe
AASHTO No.: M 246/M 246M
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel,Corrosion Resistant, for General
Application E1-1999
Standard Specification for Castings, Iron-Chromium- Nickel,Corrosion Resistant, for Severe Service
Standard Specification for Ductile Iron Gravity Sewer Pipe
Standard Specification for Steel, Strip, Carbon andHigh-Strength, Low-Alloy, Hot-Rolled, General
Requirements for
Standard Test Methods, Practices, and Terminology for ChemicalAnalysis of Steel Products
Standard Specification for Steel Castings, Ferritic andMartensitic, for Pressure-Containing and Other
Applications, forLow-Temperature Service
Standard Specification for Corrugated Steel Pipe,Metallic-Coated for Sewers and Drains AASHTO No.: M
36/M 36M
Standard Specification for Corrugated Steel Pipe, PolymerPrecoated for Sewers and Drains AASHTO No.
M245/M245M
Standard Specification for Zinc-Coated (Galvanized) Steel Barsfor Concrete Reinforcement

Standard Specification for Vacuum-Treated 12 % Chromium AlloySteel Forgings for Turbine Rotors and Shafts
Standard Specification for Through-Thickness Tension Testing ofSteel Plates for Special Applications R(2001)
Standard Specification for Epoxy-Coated Steel Reinforcing Bars
Standard Practice for Repair of Damaged and Uncoated Areas ofHot-Dip Galvanized Coatings

Standard Specification for Steel Sheet, 55% Aluminum- ZincAlloy-Coated by the Hot-Dip Process
Standard Specification for Rolled Floor Plate, Stainless Steel
Standard Practice for Installing Factory-Made Corrugated SteelPipe for Sewers and Other Applications
Standard Specification for Aluminum-Coated (Aluminized) CarbonSteel Wire
Standard Specification for Coppered Carbon Steel Wire R(2001)
Standard Specification for Alloy Structural Steel Plates
Standard Specification for Post-Applied Coatings, Pavings, andLinings for Corrugated Steel Sewer and
Drainage Pipe
Standard Specification for Steel Wire, Carbon, for General UseR(1998)
Standard Specification for High-Silicon Iron Pipe and FittingsE1-1994
Standard Practice for Criteria for Use in Evaluation of TestingLaboratories and Organizations for Examination
and Inspection of Steel,Stainless Steel, and Related A
Standard Specification for Steel, Sheet and Strip, HeavyThickness Coils, Carbon, Hot-Rolled, Structural
Quality
Standard Specification for Stainless Steel Needle Tubing R(1998)
Standard Specification for Chemical Passivation Treatments forStainless Steel Parts E1-2000
Standard Specification for Electrodeposited Coatings of Zinc onIron and Steel E1-2001
Standard Specification for Medium-Hard-Drawn Copper Wire
Standard Specification for High Conductivity Tough- Pitch CopperRefinery Shapes
Standard Specification for Concentric-Lay-Stranded CopperConductors, Hard, Medium-Hard, or Soft
Standard Specification for Cartridge Brass Sheet, Strip, Plate,Bar, and Disks (Blanks)
Standard Specification for Bronze Castings for Bridges andTurntables
Standard Specification for Refined Lead R(1997)
Standard Specification for Tinned Soft or Annealed Copper Wirefor Electrical Purposes
Standard Specification for Seamless Red Brass Pipe, StandardSizes
Standard Specification for Copper Rod Drawing Stock forElectrical Purposes E2: October 2000
Standard Test Method for Resistivity of Metallically ConductingResistance and Contact Materials R(2001)
Standard Specification for Bronze Castings for Steam LocomotiveWearing Parts
Standard Specification for Car and Tender Journal Bearings,Lined
Standard Specification for Seamless Copper Tube
Standard Specification for Seamless Copper Tube (Metric)
Standard Specification for Magnesium-Alloy Sand Castings
Standard Specification for Aluminum-Alloy Die Castings
Standard Specification for Seamless Copper Water Tube (Metric)
Standard Specification for Magnesium-Alloy Sheet and Plate
Standard Specification for Magnesium-Alloy Forgings
Standard Specification for Copper-Silicon Alloy Plate, Sheet,Strip, and Rolled Bar for General Purposes and
Pressure Vessels

Standard Specification for Copper-Silicon Alloy Rod, Bar andShapes

Standard Specification for Lead-Coated Copper Sheet and Strip forBuilding Construction
Standard Specification for Magnesium-Alloy Extruded Bars, Rods,Shapes, Tubes, and Wire
Standard Practice for Operating Salt Spray (Fog) Apparatus
Standard Specification for Copper and Copper Alloy Forging Rod,Bar, and Shapes
Standard Specification for Brass Wire
Standard Method for Measurement of Stain Resistance of AnodicCoatings on Aluminum R(1998)
Standard Test Method for Measurement of Coating Mass per UnitArea on Anodically Coated Aluminum
R(2000)
Standard Specification for Manganese Bronze Rod, Bar and Shapes
Standard Specification for Aluminum Bronze Rod, Bar, and ShapesE2-1999
Standard Specification for Aluminum Bronze, Rod, Bar, and Shapes(Metric)
(Withdrawn) Standard Specification for Copper Sheet, Strip,Plate, and Rolled Bar (Metric) Replaced by B152
REV A
Standard Test Method for Expansion (Pin Test) of Copper andCopper-Alloy Pipe and Tubing E1-1996 R(1996)
Standard Test Method for Mercurous Nitrate Test for Copper andCopper Alloys
Standard Specification for Nickel Plate, Sheet, and Strip
Standard Specification for Seamless Nickel and Nickel AlloyCondenser and Heat-Exchanger Tubes
Standard Specification for Nickel-Copper Alloy Rod, Bar, andWire
Standard Specification for Oxygen-Free Electrolytic Copper - RefineryShapes
Standard Specification for Aluminum Alloys in Ingot and MoltenForms for Castings from All Casting
Processes
Standard Practice for Preparation of Low-Carbon Steel forElectroplating R(1997)
Standard Specification for Lead-Coated and Lead-Alloy- CoatedSoft Copper Wire for Electrical Purposes
Standard Test Method for Resistivity of Electrical ConductorMaterials
Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip,and Rolled Bar
Standard Specification for Magnesium-Alloy Permanent MoldCastings
Standard Specification for Electrodeposited Coatings of Lead andLead-Tin Alloys on Steel and Ferrous Alloys
R(1999)
Standard Specification for Copper-Nickel-Zinc (Nickel Silver)Wire and Copper-Nickel Alloy Wire
Standard Specification for Aluminum and Aluminum-Alloy Sheet andPlate
Standard Specification for Aluminum and Aluminum-Alloy Drawn SeamlessTubes
Standard Specification for Aluminum and Aluminum-Alloy DrawnSeamless Tubes (Metric)
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod,and Wire
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod,and Wire (Metric)

Standard Test Method for Apparent Density of Free- Flowing MetalPowders Using the Hall Flowmeter Funnel
R(1995)
Standard Test Method for Flow Rate of Metal Powders
Standard Test Method for Sieve Analysis of Granular MetalPowders
Standard Specification for Aluminum and Aluminum-Alloy ExtrudedBars, Rods, Wire, Profiles, and Tubes
Standard Specification for Aluminum and Aluminum-Alloy ExtrudedBars, Rods, Wire, Profiles, and Tubes
(Metric)
Standard Specification for Hard-Drawn Copper-Clad Steel Wire
Standard Specification for Concentric-Lay-Stranded Copper-CladSteel Conductors
Standard Specification for Aluminum 1350-H19 Wire for ElectricalPurposes
Standard Specification for Concentric-Lay-Stranded Aluminum 1350Conductors
Standard Specification for Aluminum Bars for Electrical Purposes(Bus Bars)
Standard Specification for Aluminum Bars for Electrical Purposes(Bus Bars) (Metric)
Standard Test Method for Measurement of Thickness of AnodicCoatings on Aluminum and of Other
Nonconductive Coatings on Nonmagnetic BasisMetals with Eddy-Current Ins
Standard Specification for Tinned Hard-Drawn andMedium-Hard-Drawn Copper Wire for Electrical Purposes
Standard Specification for Aluminum and Aluminum-Alloy DieForgings, Hand Forgings, and Rolled Ring
Forgings
Standard Specification for General Requirements for WroughtCopper Alloy Wire
Standard Specification for General Requirements for WroughtSeamless Copper and Copper-Alloy Tube
Standard Specification for General Requirements for WroughtSeamless Copper and Copper-Alloy Tube
(Metric)
Standard Guide for Preparation of Aluminum Alloys forElectroplating E1-1999 R(1999)
Standard Practice for Preparation of and Electroplating on StainlessSteel R(1998)
Standard Specification for Standard Nominal Diameters andCross-Sectional Areas of AWG Sizes of Solid
Round Wires Used as ElectricalConductors
Standard Specification for Titanium and Titanium Alloy Strip, Sheet,and Plate
Standard Practice for Codification of Certain Nonferrous Metalsand Alloys, Cast and Wrought
Standard Practice for Preparation of Copper and Copper- BaseAlloys for Electroplating and Conversion
Coatings R(1995)
Standard Specification for Copper and Copper-Alloy Die Forgings(Hot-Pressed)
Standard Specification for Silver-Coated Soft or Annealed CopperWire
Standard Specification for Free-Cutting Copper Rod, Bar, Wireand Shapes
Standard Specification for Threadless Copper Pipe, StandardSizes
Standard Specification for Copper Drainage Tube (DWV)
Standard Specification for Aluminum-Alloy 6061-T6 StandardStructural Profiles

Test Method for Density Determination for Powder Metallurgy(P/M) Materials Containing Less Than Two
Percent Porosity R(1997)
Standard Specification for Aluminum and Aluminum-Alloy RoundWelded Tubes
Standard Specification for Seamless Copper Alloy Pipe and Tube
Standard Specification for Aluminum and Aluminum-Alloy Rivet andCold-Heading Wire and Rods
Standard Specification for Aluminum-Alloy Extruded Bar, Rod,Tube, Pipe, and Structural Profiles for
Electrical Purposes (Bus Conductor)
Standard Guide for Cleaning Metals Prior to Electroplating
Standard Test Method for Apparent Density of Metal Powders andCompounds Using the Scott Volumeter
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet,and Strip
Standard Specification for Nickel-Molybdenum Alloy Rod
Standard Specification for Seamless and Welded Titanium andTitanium Alloy Tubes for Condensers and Heat
Exchangers
(Withdrawn) Standard Specification for Drawn or RolledNickel-Chromium and Nickel-Chromium-Iron Alloys
for Electrical HeatingElements
Standard Specification for Aluminum and Aluminum-Alloy SeamlessPipe and Seamless Extruded Tube for Gas
and Oil Transmission and DistributionPiping Systems
Standard Specification for Titanium and Titanium Alloy Bars andBillets
Standard Specification for Nickel-Coated Soft or Annealed CopperWire
Standard Specification for Copper and Copper-Alloy SeamlessCondenser and Heat Exchanger Tubes with
Integral Fins
Standard Specification for Factory-Made Wrought Aluminum andAluminum-Alloy Welding Fittings
Standard Specification for Titanium and Titanium Alloy CastingsR(1998)
Standard Method for Copper-Accelerated Acetic Acid- Salt Spray(Fog) Testing (CASS Test)
Standard Specification for Copper-Nickel Alloy Castings
Standard Specification for Copper Sheet and Strip for BuildingConstruction
Standard Specification for Copper-Zinc-Silicon Alloy Rod
Standard Specification for Aluminum Foil for Capacitors
Standard Specification for Concentric-Lay-StrandedAluminum-Alloy 5005-H19 Conductors R(1999)
Standard Specification for Magnesium-Alloy Investment Castings
Standard Specification for Copper-Nickel-Silicon Alloy Rod andBar
Standard Specification for Copper-Aluminum-Silicon- CobaltAlloy, Copper-Nickel-Silicon-Magnesium Alloy,
Copper-Nickel-Silicon Alloy,Copper-Nickel-Aluminum- Magnesiu
Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 andUNS N08221) Plate, Sheet, and Strip
Standard Specification for Gear Bronze Alloy Castings
Standard Specification for Aluminum-Alloy Extruded StructuralPipe and Tube
Standard Test Method for Particle Size Distribution ofRefractory Metal Powders and Related Compounds by
Turbidimetry
Standard Specification for Welded Copper Tube
Standard Specification for Chromates on Aluminum R(1998)

Standard Specification for Copper-Clad Steel Wire for ElectronicApplication E1-1998 R(1998)
Standard Specification for Electrodeposited Coatings of CopperPlus Nickel Plus Chromium and Nickel Plus
Chromium
Standard Specification for UNS N08020, UNS N08026, and UNSN08024 Alloy Plate, Sheet, and Strip
Standard Specification for Copper-Iron Alloy Plate, Sheet,Strip, and Rolled Bar
Standard Specification for UNS N06030, UNS N06022, UNS N06200,UNS N08020, UNS N08026, UNS
N08024, UNS N08926, UNS N08367, UNS N10276, UNSN10665, UNS N10675, and UNS
Standard Specification for General Requirements for WroughtPrecious Metal Electrical Contact Materials
Standard Specification for Aluminum and Aluminum-Alloy DrawnTubes for General Purpose Applications
Standard Test Method for Measurement of Metal and Oxide CoatingThickness by Microscopical Examination
of a Cross Section R(1997)
Standard Specification for Electrodeposited Coatings of Gold forEngineering Uses
Standard Specification for Aluminum and Aluminum-Alloy ExtrudedRound Tubes for General-Purpose
Applications
Standard Test Method for Measurement of Coating Thicknesses bythe Magnetic Method: Nonmagnetic
Coatings on Magnetic Basis Metals
Standard Specification for Silver-Coated, Copper-Clad Steel Wirefor Electronic Application
Standard Test Method for Measurement of Thickness of MetallicCoatings by the Coulometric Method R(1997)
Standard Specification for Copper Alloy Strip for Flexible MetalHose
Standard Specification for Tin-Coated, Copper-Clad Steel Wirefor Electronic Application E1-1998 R(1998)
Standard Specification for Gold-Silver-Platinum ElectricalContact Alloy
Standard Test Method for Measurement of Coating Thicknesses bythe Magnetic Method: Electrodeposited
Nickel Coatings on Magnetic andNonmagnetic Substrates
Standard Specification for Palladium Electrical Contact Alloy
Standard Specification for Gold Electrical Contact Alloy
(Withdrawn) Standard Specification for Welded Copper andCopper-Alloy Heat Exchanger Tube (Metric)
Standard Specification for Aluminum and Aluminum-Alloy Formedand Arc-Welded Round Tube
Standard Test Methods of Tension Testing Wrought and CastAluminum- and Magnesium-Alloy Products
Standard Specification for Palladium-Silver-Copper ElectricalContact Alloy
Standard Specification for Nickel Alloy Forgings
Standard Specification for Copper-Clad Aluminum Wire E1-1998R(1998)
Standard Test Method for Measurement of Coating Thickness by theBeta Backscatter Method
Standard Test Method for Measurement of Coating Thickness byX-Ray Spectrometry
Standard Test Method for Microhardness of Electroplated CoatingsR(1999)
Standard Specification for Electrodeposited Coatings of Tin-LeadAlloy (Solder Plate) R(1999)
Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-ChromiumMolybdenum, Low-CarbonNickel-Molybdenum-Chromium- Tantalum, Low-Carbon

Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-ChromiumMolybdenum, and Low-CarbonNickel-Chromium-Molybdenum- Copper, Low-Carb
Standard Specification for Anodic Oxide Coatings on AluminumR(2000)
Standard Specification for Copper Alloy Sand Castings forGeneral Applications
Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and
Rolled Bar
Standard Test Method for Bending Fatigue Testing forCopper-Alloy Spring Materials
Standard Specification for Gold-Copper Alloy Electrical ContactMaterial R(1999)
Standard Practice for Heat Treatment of Aluminum Alloys R(1998)
Standard Practice for Determining Offset Yield Strength inTension for Copper Alloys
Standard Specification for Aluminum 1350 Round Wire, Annealedand Intermediate Tempers, for Electrical
Purposes
Standard Specification for Coin Silver Electrical Contact Alloy
Standard Specification for High-Strength, High- ConductivityCopper-Alloy Wire for Electronic Application
Standard Specification for Silver-Copper Eutectic ElectricalContact Alloy
Standard Specification for Aluminum-Alloy Rolled Tread Plate
Standard Specification for Precipitation-Hardening Nickel AlloyBars, Forgings, and Forging Stock for HighTemperature Service
Standard Specification for Welded Copper Tube for AirConditioning and Refrigeration Service
Standard Specification for Copper-Beryllium Alloy Seamless Tube
Standard Practice for Plane-Strain Fracture Toughness Testing ofAluminum Alloys
Standard Practice for Fracture Toughness Testing of AluminumAlloys
Standard Specification for Electrodeposited Engineering ChromiumCoatings on Ferrous Substrates
(Withdrawn) Standard Guide for Autocatalytic (Electroless)Nickel-Phosphorus Deposition on Metals for
Engineering Use
Standard Practices for Packaging/Packing of Aluminum andMagnesium Products
Standard Practice for Heat Treatment of Magnesium Alloys
Standard Practice for Identification Marking of Aluminum andMagnesium Products
Standard Specification for Pure Palladium Electrical ContactMaterial
Standard Specification for Platinum-Iridium Electrical ContactMaterials
Standard Specification for Palladium-Copper Electrical ContactMaterial
Standard Specification for Brass, Copper, and Chromium- PlatedPipe Nipples
Standard Specification for Electroplated Engineering NickelCoatings
Standard Specification for Coatings of Cadmium MechanicallyDeposited
Standard Specification for 60% Palladium-40% Silver ElectricalContact Material
Standard Specification for Autocatalytic (Electroless) Nickel-PhosphorusCoatings on Metal
Standard Specification for Copper-Nickel-Tin Spinodal AlloyStrip
Standard Specification for Fine Silver Electrical ContactFabricated Material R(2000)
Standard Specification for Corrugated Aluminum Pipe for Sewersand Drains
Standard Specification for Copper Alloy Sand Castings for ValveApplication
Standard Specification for Electrodeposited Coatings of CadmiumR(1998)

Standard Specification for Copper-Cobalt-Beryllium Alloy andCopper-Nickel-Beryllium Alloy Strip and Sheet
Standard Practice for Installing Factory-Made CorrugatedAluminum Culverts and Storm Sewer Pipe
Standard Specification for General Requirements for Copper AlloyCastings
Standard Specification for Compression Joints for Vitrified ClayPipe and Fittings
Standard Specification for Clay Drain Tile and Perforated ClayDrain Tile
Standard Specification for Concrete Sewer, Storm Drain, andCulvert Pipe
Standard Classification of Fireclay and High-Alumina RefractoryBrick
Standard Specification for Gypsum Plasters
Standard Test Method for Bulk Density ("Unit Weight")and Voids in Aggregate AASHTO No.: T 19/T19M
Standard Practice for Making and Curing Concrete Test Specimensin the Field E1-2001
Standard Specification for Sewer and Manhole Brick (Made fromClay or Shale) AASHTO No.: M91-78; E11999 R(1999)
Standard Specification for Structural Clay Load- Bearing WallTile
Standard Specification for Inorganic Aggregates for Use inGypsum Plaster
Standard Specification for Gypsum Lath
Standard Test Method for Organic Impurities in Fine Aggregatesfor Concrete AASHTO No.: T21
Standard Test Method for Obtaining and Testing Drilled Cores andSawed Beams of Concrete AASHTO No.:
T24
Standard Specification for Gypsum Casting Plaster and GypsumMolding Plaster
Standard Specification for Gypsum Keene's Cement
Standard Specification for Gypsum Keene's Cement
Standard Test Methods for Sampling and Testing Brick andStructural Clay Tile AASHTO No.: T 32-70
Standard Specification for Calcium Silicate Brick (Sand-LimeBrick)
Standard Specification for Reinforced Concrete Culvert, StormDrain, and Sewer Pipe
Standard Specification for Reinforced Concrete Culvert, StormDrain, and Sewer Pipe (Metric)
Standard Specification for Treated Core and Nontreated CoreGypsum Sheathing Board
Standard Test Method for Effect of Organic Impurities in FineAggregate on Strength of Mortar E1-1995
R(1995)
Standard Test Method for Soundness of Aggregates by Use ofSodium Sulfate or Magnesium Sulfate
Standard Specification for Masonry Cement
Standard Specification for Ready-Mixed Concrete E1, E2- 2001
Standard Test Method for Modulus of Rupture of Dimension StoneR(2000)

Standard Test Method for Compressive Strength of HydraulicCement Mortars (Using 2-in. or (50-mm) Cube
Specimens)
Standard Test Method for Reheat Change of Refractory BrickR(1998)
(Withdrawn) Standard Test Method for Compressive Strength ofConcrete Using Portions of Beams Broken in
Flexure AASHTO No.: T140
Standard Test Method for Materials Finer Than 75- Micrometers(No. 200) Sieve in Mineral Aggregates by
Washing
Standard Terminology Relating to Dimension Stone
Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture,Modulus of Elasticity)
Standard Test Method for Water Absorption of Slate R(1999)
Standard Test Method for Lightweight Particles in AggregateAASHTO No.: T113
Standard Terminology Relating to Concrete and ConcreteAggregates E1-2001
Standard Specification for Ceramic Glazed Structural Clay FacingTile, Facing Brick, and Solid Masonry Units
Standard Test Methods for Cold Crushing Strength and Modulus ofRupture of Refractories
Standard Test Method for Sieve Analysis of Fine and CoarseAggregates
Standard Test Method for Density (Unit Weight), Yield, and AirContent (Gravimetric) of Concrete AASHTO
No.: T121
Standard Test Method for Clay Lumps and Friable Particles inAggregates AASHTO No.: T112
Standard Test Method for Slump of Hydraulic-Cement Concrete
Standard Specification for Aggregate for Masonry Mortar AASHTONo.: M45-70(1974)
Standard Test Methods for Polariscopic Examination of GlassContainers
Standard Test Method for Water Retention by Concrete CuringMaterials
Standard Test Method for Length Change of Hardened Hydraulic-CementMortar and Concrete
Standard Specification for Vitrified Clay Filter Blocks
Standard Terminology of Glass and Glass Products
Standard Test Methods for Thickness and Density of Blanket orBatt Thermal Insulations
Standard Test Method for Compressive Strength of Dimension StoneR(1999)
Standard Specification for Sheet Materials for Curing Concrete
Standard Practice for Sampling Freshly Mixed Concrete
Standard Test Method for Air Content of Freshly Mixed Concreteby the Volumetric Method
Standard Test Method for Measuring Thickness of ConcreteElements Using Drilled Concrete Cores AASHTO
No.: T 148
Standard Practice for Sampling and the Amount of Testing ofHydraulic Cement
Standard Test Method for Density of Hydraulic Cement AASHTO No.:T133
Standard Practice for Making and Curing Concrete Test Specimensin the Laboratory
Standard Specification for Expanded or Exfoliated VermiculiteThermal Insulating Cement

Standard Specification for Finishing Hydrated Lime R(1997)

Standard Test Methods for Cellulosic Fiber Insulating Board
Standard Test Method for Fundamental Transverse, Longitudinal,and Torsional Resonant Frequencies of
Concrete Specimens E1-1999
Standard Test Methods for Resistance of Glass Containers toChemical Attack R(1999)
Standard Test Method for Potential Alkali Reactivity ofCement-Aggregate Combinations (Mortar-Bar Method)
Standard Test Method for Steady-State Thermal Performance ofBuilding Assemblies by Means of a Guarded
Hot Box E1-1993 R(1993)
Standard Test Method for Abrasion Resistance of Stone Subjectedto Foot Traffic E1-1997 R(1997)
Standard Specification for Air-Entraining Admixtures forConcrete
Standard Test Methods for Chemical Resistance of Mortars,Grouts, and Monolithic Surfacings and Polymer
Concretes
Standard Specification for Mortar for Unit Masonry
Standard Test Method for Shear Properties of Sandwich CoreMaterials E1-2000
Standard Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test)
Standard Terminology Relating to Porcelain Enamel andCeramic-Metal Systems
Standard Test Method for Potential Alkali-Silica Reactivity ofAggregates (Chemical Method)
Standard Test Method for Flexural Strength of Concrete (UsingSimple Beam with Center-Point Loading)
Standard Descriptive Nomenclature for Constituents of ConcreteAggregates
Standard Test Method for Flatwise Tensile Strength of SandwichConstructions R(1999)
Standard Test Methods for Vitrified Clay Pipe
Standard Test Method for Density and Dimensions of PreformedPipe-Covering-Type Thermal Insulation
Standard Test Method for Dimensions and Density of PreformedBlock and Board - Type Thermal Insulation
Standard Test Method for Tensile Strength of Chemical- ResistantMortar, Grouts, and Monolithic Surfacings
Standard Specification for Liquid Membrane-Forming Compounds forCuring Concrete
Standard Specification for Clay Flue Linings
Standard Specification for Gypsum Concrete
Standard Specification for Gypsum Formboard
Standard Test Method for Bond Strength of Chemical- ResistantMortars
Standard Specification for Lightweight Aggregates for StructuralConcrete
Standard Specification for Lightweight Aggregates for InsulatingConcrete
Standard Test Method for Steady-State Heat Transfer Propertiesof Horizontal Pipe Insulation
Standard Test Method for Softening Point of Glass R(1998)
Standard Test Method for Linear Shrinkage of PreformedHigh-Temperature Thermal Insulation Subjected to
Soaking Heat E1-1992 R(1997)
Standard Specification for Reinforced Concrete Low- HeadPressure Pipe
Standard Test Method for Flatwise Compressive Properties ofSandwich Cores
Standard Test Methods for Measurement of Thickness of SandwichCores
Standard Criteria for Sampling and Acceptance of PreformedThermal Insulation Lots R(2000)
Standard Test Method for Flexural Properties of SandwichConstructions

Standard Specification for Chemical-Resistant Resin Mortars

Standard Test Method for Time of Setting of Concrete Mixtures byPenetration Resistance
Standard Test Method for Hot-Surface Performance ofHigh-Temperature Thermal Insulation
Standard Specification for Concrete Drain Tile
Standard Specification for Concrete Drain Tile (Metric)
Standard Test Method for Absorption of Chemical- ResistantMortars, Grouts, and Monolithic Surfacings, and
Polymer Concretes
Standard Test Method for Working, Setting, and Service StrengthSetting Times of Chemically Setting
Chemical- Resistant Silicate and SilicaMortars
Standard Test Method for Abrasion Resistance of Concrete bySandblasting
Standard Test Method for Linear Drying Shrinkage of ConcreteMasonry Units
Standard Specification for Joints for Circular Concrete Sewerand Culvert Pipe, Using Rubber Gaskets
Standard Specification for Joints for Circular Concrete Sewerand Culvert Pipe, Using Rubber Gaskets (Metric)
Standard Specification for Perforated Concrete Pipe (Metric)
Standard Specification for Molds for Forming Concrete TestCylinders Vertically
Standard Test Methods for Physical Testing of Gypsum, GypsumPlasters and Gypsum Concrete
Standard Specification for Precast Reinforced Concrete ManholeSections
Standard Specification for Precast Reinforced Concrete ManholeSections (Metric)
Standard Test Method for Laboratory Aging of SandwichConstructions
Standard Specification for Chemical Admixtures for ConcreteE1-2001

Standard Test Method for Compressive Strength of LightweightInsulating Concrete

Standard Test Method for Splitting Tensile Strength ofCylindrical Concrete Specimens
Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile(Metric)
Standard Test Method for Facial Dimensions and Thickness ofFlat, Rectangular Ceramic Wall and Floor Tile
R(1999)
Standard Specification for Reinforced Concrete Arch Culvert,Storm Drain, and Sewer Pipe
Standard Specification for Reinforced Concrete Arch Culvert,Storm Drain, and Sewer Pipe (Metric)
Standard Specification for Reinforced Concrete EllipticalCulvert, Storm Drain, and Sewer Pipe
Standard Specification for Elastomeric Cellular Preformed Gasketand Sealing Material
Standard Test Method for Obtaining and Testing Specimens ofHardened Lightweight Insulating Concrete for
Compressive Strength R(1995)
Standard Specification for Nails for the Application of GypsumBoard
Standard Specification for Vermiculite Loose Fill ThermalInsulation E1-1996 R(1996)

Standard Test Method for Steady-State Thermal TransmissionProperties by Means of the Heat Flow Meter
Apparatus
Standard Test Methods for Density of Granular Loose FillInsulations
Standard Specification for Preformed Flexible ElastomericCellular Thermal Insulation in Sheet and Tubular
Form
Standard Specification for Lock-Strip Gaskets R(1999)
Standard Specification for Perlite Loose Fill Insulation E1-1995R(1995)
Standard Test Method for Measuring Trueness and Squareness ofRigid Block and Board Thermal Insulation
Standard Specification for Cellular Glass Thermal Insulation
Standard Specification for Adhesives for Fastening GypsumWallboard to Wood Framing
Standard Test Method for Ash in a Graphite Sample R(2000)
Standard Test Method for Moisture in a Graphite Sample R(2000)
Standard Specification for Rubber Gaskets for Cast Iron SoilPipe and Fittings
Standard Test Method for Total Evaporable Moisture Content ofAggregate by Drying
Standard Test Method for Determining Density of StructuralLightweight Concrete
Standard Specification for Limestone Dimension Stone
Standard Specification for Oil- and Resin-Base Caulking Compoundfor Building Construction
Standard Test Method for Flexural Strength and Modulus ofElasticity of Chemical-Resistant Mortars, Grouts,
Monolithic Surfacings, andPolymer Concretes
Standard Practice for Determining Chemical Resistance ofThermosetting Resins Used in Glass-FiberReinforced Structures Intended forLiquid Service
Standard Specification for Contact-Molded ReinforcedThermosetting Plastic (RTP) Laminates for CorrosionResistant Equipment
Standard Test Method for Potential Alkali Reactivity ofCarbonate Rocks for Concrete Aggregates (Rock
Cylinder Method)
Standard Specification for Gypsum Veneer Plaster
Standard Specification for Gypsum Base for Veneer Plasters
Standard Specification for Unfaced Preformed Rigid CellularPolyisocyanurate Thermal Insulation
Standard Test Method for Pulse Velocity Through Concrete
Standard Specification for Molded Expanded Perlite Block andPipe Thermal Insulation
Standard Test Method for Constituent Content of CompositePrepreg by Soxhlet Extraction
Standard Specification for Quartz-Based Dimension Stone
Standard Practice for Capping Cylindrical Concrete Specimens
Standard Specification for Water-Resistant Gypsum Backing Board
Standard Test Method for Adhesion or Cohesive Strength ofThermal Spray Coatings
Standard Specification for the Manufacture, Performance, andTesting of Metal Suspension Systems for
Acoustical Tile and Lay-In PanelCeilings
Standard Practice for Installation of Metal Ceiling SuspensionSystems for Acoustical Tile and Lay-In Panels
Standard Specification for S Aggregates for Radiation- ShieldingConcrete
Standard Descriptive Nomenclature of Constituents of Aggregatesfor Radiation-Shielding Concrete R(1997)

Standard Test Method for Rheological (Flow) Properties ofElastomeric Sealants

Standard Test Method for Staining Materials in LightweightConcrete Aggregates E1
Standard Test Method for Flexural Strength of ManufacturedCarbon and Graphite Articles Using Four- Point
Loading at Room TemperatureR(2000)
Standard Specification for Porous Concrete Pipe (Metric)
Standard Specification for Reinforced Concrete D-Load Culvert,Storm Drain, and Sewer Pipe
Standard Specification for Reinforced Concrete D-Load Culvert,Storm Drain, and Sewer Pipe (Metric)
Standard Specification for Chemical-Resistant Resin Grouts forBrick or Tile
Standard Test Method for Indentation Hardness ofElastomeric-Type Sealants by Means of a Durometer
Standard Specification for Asbestos-Cement Storm Drain Pipe
Standard Specification for Mineral-Fiber Blanket ThermalInsulation for Light Frame Construction and
Manufactured Housing
Standard Test Method for Resistance of Concrete to RapidFreezing and Thawing
Standard Specification for Glazing Compounds for Back Beddingand Face Glazing of Metal Sash
Standard Practice for Preparing Precision and Bias Statementsfor Test Methods for Construction Materials
Standard Test Method for Tack-Free Time of Elastomeric SealantsE1-1997 R(1997)
Standard Test Method for Compressive Strength of Carbon andGraphite R(2000)
Standard Specification for Vitrified Clay Pipe, Extra Strength,Standard Strength, and Perforated
Standard Practice for Reducing Samples of Aggregate to TestingSize AASHTO T248
Standard Test Method for Average Particle Size of Alumina andSilica Powders by Air Permeability E1-1997
R(1997)
Standard Specification for Semidense Mineral Fiber SidingR(1998)
Standard Test Method for Aging Effects of Artificial Weatheringon Latex Sealants
Standard Specification for Cellulosic Fiber (Wood- Base)Loose-Fill Thermal Insulation
Standard Specification for Mineral Fiber Loose-Fill ThermalInsulation
Standard Specification for Standard Sand
Standard Test Method for Preconstruction and ConstructionEvaluation of Mortars for Plain and Reinforced
Unit Masonry
Standard Test Method for Effects of Heat Aging on Weight Loss,Cracking, and Chalking of Elastomeric
Sealants R(1998)
Standard Test Method for Effects of Accelerated Weathering onElastomeric Joint Sealants E1-1997 R(1997)
Standard Test Method for Adhesion-In-Peel of Elastomeric JointSealants
Standard Test Method for Foaming Agents for Use in ProducingCellular Concrete Using Preformed Foam
Standard Specification for Glass Fiber Blanket Insulation(Aircraft Type)
Standard Test Method for Rebound Number of Hardened Concrete
Standard Practice for Surface Preparation of Concrete forApplication of Chemical-Resistant Resin Monolithic
Surfacings
Standard Test Method for Sulfur in Graphite byCombustion-Iodometric Titration Method E1-1998 R(1998)
Standard Terminology Relating to Concrete Pipe and RelatedProducts E1-1999
Standard Practice for Examination and Sampling of HardenedConcrete in Constructions
Standard Specification for Application and Finishing of GypsumBoard

Standard Specification for Installation of Interior Lathing andFurring

Standard Specification for Application of Gypsum Veneer Plaster
Standard Specification for Application of Gypsum Base to ReceiveGypsum Veneer Plaster
Standard Specification for Metal Lath R(2000)
Standard Specification for Dense Elastomeric Compression SealGaskets, Setting Blocks, and Spacers
Standard Practice for Firing Refractory Concrete SpecimensR(1995)
Standard Test Method for Compressive Strength of ConcreteCylinders Cast in Place in Cylindrical Molds
(Withdrawn) Standard Test Method for Effective Shrinkage ofEpoxy-Resin Systems Used with Concrete
Withdrawn October 1997
Standard Test Method for Thermal Compatibility between Concreteand an Epoxy-Resin Overlay
Standard Specification for Precast Concrete Water and WastewaterStructures
Standard Specification for Adhesives for Duct Thermal InsulationE1-1996 R(1996)
Standard Practice for Determining the Properties of JacketingMaterials for Thermal Insulation R(1996)
Standard Specification for Resilient Connectors betweenReinforced Concrete Manhole Structures, Pipes, and
Laterals
Standard Classification of Potential Health and Safety ConcernsAssociated with Thermal Insulation Materials
and Accessories
Standard Specification for Exterior Gypsum Soffit Board
Standard Specification for Surface-Applied Bonding Compounds forExterior Plastering
Standard Specification for Grout Fluidifier forPreplaced-Aggregate Concrete
Standard Test Method for Flow of Grout for Preplaced- AggregateConcrete (Flow Cone Method)
Standard Test Method for Compressive Strength of Grouts forPreplaced-Aggregate Concrete in the Laboratory
Standard Specification for Steel Drill Screws for theApplication of Gypsum Panel Products or Metal Plaster
Bases to Steel StudsFrom 0.033 in. (0.84 mm) to 0.112 in.
Standard Guide for Lock-Strip Gasket Glazing R(1997)
Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
Standard Specification for Quicklime and Hydrated Lime for SoilStabilization
(Withdrawn) Standard Specification for Perlite Board and RigidCellular Polyisocyanurate Composite Roof
Insulation Replaced by C1289
Standard Specification for Ground Granulated Blast- Furnace Slagfor Use in Concrete and Mortars
Standard Test Method for Time of Flow of Fiber- ReinforcedConcrete Through Inverted Slump Cone
Standard Specification for Steel Self-Piercing Tapping Screwsfor the Application of Gypsum Panel Products or
Metal Plaster Bases to WoodStuds or Steel Studs
Standard Practice for Installation of Cellulosic and MineralFiber Loose-Fill Thermal Insulation
Standard Test Method for Flexural Toughness and First- CrackStrength of Fiber-Reinforced Concrete (Using
Beam with Third-Point Loading)
Standard Specification for Spray-Applied Rigid CellularPolyurethane Thermal Insulation
Standard Specification for Flat Glass R(1997)
Standard Specification for Accessories for Gypsum Wallboard andGypsum Veneer Base

Standard Specification for Heat-Treated Flat Glass - Kind HS,Kind FT Coated and Uncoated Glass
Standard Specification for Installation of Lathing and Furringto Receive Interior and Exterior Portland CementBased Plaster
Standard Test Method for Temperature of Freshly Mixed PortlandCement Concrete
(Withdrawn) Standard Specification for Butyl Rubber- BasedSolvent-Release Sealants Withdrawn December
1997 and Replaced by C1311; IHSNotified 11/1998; *NOT CURRENT
Standard Specification for Packaged Dry, Hydraulic- Cement Grout(Nonshrink)
Standard Specification for Fiber-Reinforced Concrete andShotcrete
Standard Specification for Faced Rigid Cellular PolyisocyanurateThermal Insulation Board
Standard Practices for Evaluating the Resistance of Plastics toChemical Reagents R(2001)
Standard Practice for Specifying Color by the Munsell System
Standard Test Method for Breaking Strength of Yarn in Skein FormR(2000)
Standard Test Method for Longitudinal Tensile Properties of"Fiberglass" (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe andTube
Standard Classification for Machine-Made "Fiberglass"(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
Standard Practice for Obtaining Hydrostatic or Pressure DesignBasis for "Fiberglass" (Glass-FiberReinforcedThermosetting-Resin) Pipe and Fittings
Standard Specification for Filament-Wound "Fiberglass"(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
Standard Specification for Centrifugally Cast"Fiberglass" (Glass-Fiber-Reinforced Thermosetting- Resin) Pipe
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
Standard Test Method for Bitumen Content R(1998)
Standard Test Method for Penetration of Bituminous Materials
Standard Test Method for Loss on Heating of Oil and AsphalticCompounds E1; AASHTO No.: T 47 R(2000)
Standard Specification for Raw Tung Oil R(1998)
Standard Specification for Spirits of Turpentine
Standard Terminology for Paint, Related Coatings, Materials, andApplications
Standard Test Method for Distillation of Road Tars
Standard Test Methods for Sampling and Testing Lac Resins
Standard Guide for Chemical Analysis of White Pigments R(1999)
Standard Test Method for Softening Point of Bitumen(Ring-and-Ball Apparatus) E1-2000 R(2000)
Standard Specification for Asphalt Primer Used in Roofing,Dampproofing,and Waterproofing E-1; AASHTO
No.: M116 R(2000)
Standard Specification for Coal Tar Primer Used in Roofing,Dampproofing,and Waterproofing 2AASHTO No.:
M121
Standard Test Methods for Chemical Analysis of Yellow, Orange,Red, and Brown Pigments Containing Iron
and Manganese R(1999)
Standard Test Method for Relative Density of Solid Pitch andAsphalt (Displacement Method) R(1999)
Standard Practice for Sampling Aggregates AASHTO No. T2
Standard Specification for Zinc Oxide Pigments AASHTO No.: M124R(1999)

Standard Test Method for Distillation of Petroleum Products atAtmospheric Pressure

Standard Test Method for Precipitation Number of LubricatingOils
Standard Test Method for Flash and Fire Points by Cleveland OpenCup IP Designation: 36/84 (89); AASHTO
No.: T48; DIN 51 376
Standard Test Methods for Flash-Point by Pensky- Martens ClosedCup Tester IP Designation: D34/99
Standard Test Method for Water in Petroleum Products andBituminous Materials by Distillation AASHTO No.
T55; API Designation: MPMSChapter 10.5; IP Designation: 74/8
Standard Test Method for Pour Point of Petroleum Products IPDesignation: 15/95
Standard Test Method for Ductility of Bituminous MaterialsAASHTO No.: T51
Standard Test Methods for Vitrified Ceramic Materials forElectrical Applications R(1999)
Standard Guide for Sampling, Test Methods, Specifications, andGuide for Electrical Insulating Oils of
Petroleum Origin
Standard Terminology Relating to Textiles
Standard Test Methods for Analysis of Yellow, Orange, and GreenPigments Containing Lead Chromate and
Chromium Oxide Green R(1997)
Standard Test Method for Drop Melting Point of Petroleum WaxIncluding Petrolatum IP Designation:
133/79(87); TAPPI T 634ts-64 R(1999)
Standard Test Methods for Analysis of Lubricating Grease
Standard Test Method for Sulfur in Petroleum Products (GeneralBomb Method) British Standard 4454; IP
Designation: 61/99
Standard Test Method for Detection of Copper Corrosion fromPetroleum Products by the Copper Strip Tarnish
Test IP Designation: 154/93;British Standard 4351; E1- 200
Standard Test Method for Dielectric Breakdown Voltage andDielectric Strength of Solid Electrical Insulating
Materials at CommercialPower Frequencies
Standard Test Methods for AC Loss Characteristics and Permittivity(Dielectric Constant) of Solid Electrical
Insulation
Standard Test Methods for Specific Gravity of Pigments E1-1996R(1996)
Standard Specification for Bitumen-Saturated Cotton Fabrics Usedin Roofing and Waterproofing
Standard Specification for Rubber Insulating Matting
Standard Test Methods for Coarse Particles in Pigments, Pastes,and Paints R(1999)
Standard Test Method for Burning Quality of Kerosine R(1999)
Standard Test Method for Conradson Carbon Residue of PetroleumProducts IP Designation: 13/94; British
Standard 4380
Standard Test Methods for Sewing Threads
Standard Specification for Lampblack Pigment E1-1996 R(1996)
Standard Test Methods for Cone Penetration of Lubricating GreaseIP Designation: 50/88
Standard Specification for Smooth-Surfaced Asphalt Roll Roofing(Organic Felt) R(1996)
Standard Specification for Asphalt Shingles (Organic Felt)Surfaced with Mineral Granules

Standard Specification for Coal-Tar-Saturated Organic Felt Usedin Roofing and Waterproofing
Standard Test Methods for Rigid Sheet and Plate Materials Usedfor Electrical Insulation
Standard Test Methods of Sampling and Testing Turpentine
Standard Specification for Asphalt Roll Roofing (Organic Felt)Surfaced with Mineral Granules R(1996)
Standard Specification for Boiled Linseed Oil E1-1995 R(1995)
Standard Specification for Iron Blue Pigment R(1999)
Standard Guide for Sampling and Testing Volatile Solvents andChemical Intermediates for Use in Paint and
Related Coatings and Material
Standard Test Methods for Identification of Fibers in Textiles
Standard Test Methods for Hygroscopic Moisture (and Other MatterVolatile under the Test Conditions) in
Pigments
Standard Test Method for Oil Absorption of Pigments by SpatulaRub-Out
Standard Test Method for Solvent-Extractable Material in BlackPigments R(1999)
Standard Specification for Asphalt Used in Roofing
Standard Test Method for Gasoline Diluent in Used Gasoline EngineOils by Distillation IP Designation: 23/83
(92)
Standard Specification for Acetone
Standard Specification for 2-Butoxyethanol R(1997)
Standard Specification for 2-Ethoxyethanol R(1999)
Standard Test Methods for Rigid Tubes Used for ElectricalInsulation
Standard Test Methods for Flexible Treated Sleeving Used forElectrical Insulation
Standard Classification for Natural Muscovite Block Mica andThins Based on Visual Quality
Standard Specification for Wood to Be Used as Panels inWeathering Tests of Coatings
Standard Test Method for Specific Gravity of Creosote Fractionsand Residue AASHTO No. T 74; E1-1995
R(1995)
Standard Specification for Asphalt Roll Roofing (Organic Felt)Surfaced with Mineral Granules; Wide Selvage
R(1996)
Standard Test Methods for Thickness of Solid ElectricalInsulation
Standard Test Methods for Rubber Hose R(2000)
Standard Test Method for Gum Content in Fuels by Jet EvaporationIP Designation: 131/99
Standard Test Method for Color and Strength of ChromaticPigments with a Mechanical Muller
Standard Specification for Coal-Tar Creosote for thePreservative Treatment of Piles, Poles, and Timbers for
Marine, Land, andFreshwater Use R(1999)
Standard Test Methods for Rubber Property - Compression Set
Standard Test Method for Grindability of Coal by theHardgrove-Machine Method E2-2000
Standard Test Methods for Vulcanized Rubber and ThermoplasticElastomers - Tension
Standard Test Methods for Rubber Property - Adhesion to FlexibleSubstrate
(Withdrawn) Standard Test Methods for Testing Pile Yarn FloorCovering Construction
Standard Test Method for Particle-Size Analysis of Soils R(1998)
Standard Test Methods for Rubber Deterioration - Dynamic FatigueR(2000)
Standard Test Methods for Chemical Analysis of Zinc YellowPigment (Zinc Chromate Yellow) R(1999)

Standard Specification for Asphalt Used in Dampproofing andWaterproofing E1 R(1999)

Standard Test Method for Tar Acids in Creosote-Coal TarSolutions E1-2000 R(2000)
Standard Test Method for Rubber Deterioration by Heat and AirPressure
Standard Specification for Caustic Soda (Anhydrous) R(1997)
Standard Test Methods for Sampling and Chemical Analysis ofSoaps and Soap Products R(1997)
Standard Test Methods for Felt
Standard Test Method for Sediment in Crude Oils and Fuel Oils bythe Extraction Method API Designation:
Chapter 10-1 (MPMS); BSI 4382; IPDesignation: 53/82; E1-1995;
Standard Classification for Dry Pigmentary Titanium DioxideProducts
Standard Test Method for Ash from Petroleum Products IPDesignation: 4/96; British Standard 4450
(Withdrawn) Standard Test Method for Acetone Extraction ofPhenolic Molded or Laminated Products
Withdrawn March 1998; IHS Notified08/1999; *NOT CURRENT DOCUMENT
(Withdrawn) Standard Specification for Chip Soap R(1995)
(Withdrawn) Standard Specification for Powdered Soap(Nonalkaline Soap Powder) R(1995)
Standard Test Methods for Calcium and Magnesium in Water R(1998)
Standard Test Methods for Chloride Ion in Water R(1999)
(Discontinued) Standard Test Methods for Phosphorus in WaterDiscontinued February 1997; IHS Notified
06/1999; *NOT CURRENT DOCUMENT
Standard Specification for Asphalt Plank
Standard Test Method for Rubber Deterioration - Surface Cracking
Standard Specification for Zinc Dust Pigment
Standard Test Methods for Mandrel Bend Test of Attached OrganicCoatings R(2001)
Standard Test Method for Specular Gloss R(1999)
Standard Test Method for Ramsbottom Carbon Residue of PetroleumProducts IP Designation: 14/94; British
Standard 4451
Standard Test Method for Enclosed Carbon-Arc Exposures ofBituminous Materials
(Discontinued) Standard Specification for Single Jute YarnE1-1988; Discontinued 1996; IHS Notified 12/1998
Standard Test Methods for Preformed Expansion Joint Fillers forConcrete Construction (Nonextruding and
Resilient Types)
Standard Test Method for Sieve Analysis of Mineral Filler forRoad and Paving Materials AASHTO No.: T 37;
E1-1999
Standard Guide for Testing Drying Oils R(1998)
Standard Test Methods for Wetting and Drying CompactedSoil-Cement Mixtures
Standard Test Method for Phthalic Anhydride Content of AlkydResins and Resin Solutions E1-1996 R(1996)
Standard Test Method for Carbonizable Substances in WhiteMineral Oil
Standard Test Method for Dropping Point of Lubricating Grease IPDesignation: 132/97
Standard Test Method for Rubber - Deterioration in an Air Oven
Standard Test Methods for Rubber Properties in CompressionR(2001)
Standard Specification for Glass Fiber Strands
Standard Specification for Greige Woven Glass Fabrics

Standard Specification for Tetrasodium Pyrophosphate (Anhydrous)R(1997)

Standard Specification for Wet Ground Mica Pigments R(1999)
Standard Practice for Preparation of Cold-Rolled Steel Panelsfor Testing Paint, Varnish, Conversion Coatings,
and Related Coating Products
Standard Test Method for Evaluating Degree of Rusting on PaintedSteel Surfaces SSPC-VIS-2
Standard Test Method for Carbonizable Substances in Paraffin WaxR(1999)
Standard Test Method for Punching Quality of Phenolic LaminatedSheets R(1998)
(Withdrawn) Standard Test Methods for Deformation of PlasticsUnder Load E1-1988; Discontinued 1994
R(1988)
Standard Test Methods for Rubber Hose for Automotive Air andVacuum Brake System
Standard Test Methods for Quantitative Analysis of Textiles
Standard Volume Correction Table for Road Tar
Standard Test Method for Rate of Burning and/or Extent and Timeof Burning of Plastics in a Horizontal
Position
(Withdrawn) Standard Test Method for Surface Irregularities ofFlat Transparent Plastic Sheets
Standard Test Method for Tensile Properties of Plastics (Metric)
Standard Test Method for Determining Compressive Resistance ofShipping Containers, Components, and Unit
Loads
Standard Test Method for Moisture Content of Paper andPaperboard by Oven Drying
Standard Test Method for Grammage of Paper and Paperboard (Massper Unit Area) TAPPI T 410 om-88
(Withdrawn) Standard Practice for Design of Molds for TestSpecimens of Plastic Molding Materials *NOT
CURRENT DOCUMENT
Standard Test Method for Rust-Preventing Characteristics ofInhibited Mineral Oil in the Presence of Water IP
Designation: 135/93
Standard Test Method for Flexural Fatigue of Plastics byConstant-Amplitude-Of-Force
(Discontinued) Standard Test Method for Mar Resistance ofPlastics E1-1995; Discontinued 1998; IHS Notified
08/1999; *NOT CURRENTDOCUMENT
Standard Practice for Conditioning Paper and Paper Products forTesting TAPPI T 402 R(1998)
Standard Test Method for Internal Tearing Resistance of Paper
Standard Specification for Coarse Aggregate for BituminousPaving Mixtures
Standard Specification for Crushed Aggregate for MacadamPavements
Standard Test Method for Compressive Properties of RigidPlastics
(Withdrawn) Standard Test Method for Compressive Properties ofRigid Plastics (Metric)
Standard Test Method for Coefficient of Linear Thermal Expansionof Plastics between -30 Degrees C and 30
Degrees C with Vitreous SilicaDilatometer
Standard Test Methods for Laboratory Compaction Characteristicsof Soil Using Standard Effort (12,400 ftlbf/ft3 (600 kN-m/m3))
Standard Specification for Melamine-Formaldehyde Molding Compounds
Standard Specification for Cellulose Acetate Molding andExtrusion Compounds
Standard Specification for Cellulose Acetate Butyrate Moldingand Extrusion Compounds
Standard Specification for Laminated Thermosetting Materials

Standard Specification for Vulcanized Fibre Sheets, Rods, andTubes Used for Electrical Insulation
Standard Test Method for No-Pick-Up Time of Traffic PaintR(1998)
Standard Test Method for Evaluating Degree of Blistering ofPaints R(2000)
Standard Test Method for Free-Swelling Index of Coal R(1999)
Standard Test Method for Surface Wettability of Paper(Angle-Of-Contact Method)
Standard Test Method for Resistance of Nonporous Paper toPassage of Air R(1999)
(Withdrawn) Standard Specification for Vinylidene ChlorideMolding Compounds
Standard Test Method for Shear Strength of Plastics by PunchTool
Standard Specification for Methyl Ethyl Ketone R(2001)
Standard Test Method for Brittleness Temperature of Plastics andElastomers by Impact
Standard Test Method for Apparent Bending Modulus of Plastics byMeans of a Cantilever Beam
Standard Test Methods for Coated Fabrics
(Discontinued) Standard Practice for Determination of Weight andShape Changes of Plastics under Accelerated
Service Conditions Discontinued1998; IHS Notified 08/199
Standard Test Method for Bursting Strength of Paper
Standard Test Method for Water Resistance of Paper, Paperboard,and Other Sheet Materials by the Dry
Indicator Method R(1998)
(Discontinued) Standard Test Method for Shipping Containers inRevolving Hexagonal Drum E1-1993 R(1993)
Standard Test Method for Rockwell Hardness of Plastics andElectrical Insulating Materials
Standard Classification System for Poly(Methyl Methacrylate)(PMMA) Molding and Extrusion Compounds
(Withdrawn) Standard Test Methods for Flexural Properties ofUnreinforced and Reinforced Plastics and
Electrical Insulating Materials(Metric)
(Withdrawn) Standard Test Methods for Rubber Property - Young'sModulus at Normal and Subnormal
Temperatures *NOT CURRENT DOCUMENT R(1989)
Standard Test Method for Chlorine in New and Used PetroleumProducts (Bomb Method)
Standard Practices for Producing Films of Uniform Thickness ofPaint, Varnish, and Related Products on Test
Panels R(2001)
Standard Test Method for Tensile Properties of Paper andPaperboard Using Constant-Rate-Of-Elongation
Apparatus
Standard Practice for Rubber Conditioning for Low- TemperatureTesting R(1997)
Standard Test Method for Hydrogen Sulfide and Sulfur DioxideContent (Qualitative) of Industrial Aromatic
Hydrocarbons R(2001)
Standard Test Methods for Specific Gravity of Soil Solids byWater Pycnometer
Standard Test Methods for Manganese in Water
Standard Test Method for Silica in Water
Standard Test Method for Rubber - Deterioration by Heating inAir (Test Tube Enclosure)
Standard Test Method for Evaluating Degree of Settling of PaintR(1998)
Standard Test Methods of Testing Cellulose Acetate
Standard Test Method for Oxidation Stability of Aviation Fuels(Potential Residue Method) IP Designation:
138/99; British Standard 4456
Standard Test Method for Sulfated Ash from Lubricating Oils andAdditives IP Designation: 163/96; British
Standards 4716

Standard Test Methods for Nonrigid Vinyl Chloride Polymer TubingUsed for Electrical Insulation
Standard Test Method for Inorganic Chlorides and Sulfates inInsulating Oils
Standard Terminology Relating to Plastics
Standard Test Methods for Dissolved Oxygen in Water R(1996)
Standard Test Methods for Specific Gravity, Apparent, of LiquidIndustrial Chemicals R(2000)
Standard Test Method for Insolubles in Used Lubricating Oils
(Discontinued) Standard Test Method for Water Vapor Permeabilityof Packages
Standard Test Method for Resistance of Adhesive Bonds toChemical Reagents
Standard Practice for Applied Weight per Unit Area of LiquidAdhesive
Standard Test Method for Strength Properties of Adhesive Bondsin Shear by Compression Loading
Standard Test Method for Strength Properties of Adhesives inPlywood Type Construction in Shear by Tension
Loading
Standard Test Method for Dissipation Factor (or Power Factor)and Relative Permittivity (Dielectric Constant)
of Electrical InsulatingLiquids E1-1999
Standard Test Method for Rubber Property - Plasticity andRecovery (Parallel Plate Method)
Standard Specification for Borax R(1997)
Standard Test Method for Congealing Point of Petroleum Waxes,Including Petrolatum IP Designation: 76/95;
British Standard 5088 R(1998)
Standard Test Method for Oxidation Stability of LubricatingGreases by the Oxygen Bomb Method IP
Designation: 142/85 (92); E1-1995R(1995)
Standard Test Method for Oxidation Characteristics of InhibitedMineral Oils British Standard 4388
Standard Test Methods for Rubber Properties in Compression orShear (Mechanical Oscillograph) R(1997)
Standard Specification for Penetration-Graded Asphalt Cement forUse in Pavement Construction R(1999)
Standard Test Method for Impact Strength of Adhesive Bonds
Standard Test Method for Water Resistance of Shipping Containersby Spray Method
Standard Test Method for Bearing Strength of Plastics
Standard Test Methods for Abrasion Resistance of OrganicCoatings by Falling Abrasive R(2001)
Standard Test Method for Laboratory Determination of Degree ofBleeding of Traffic Paint R(1998)
Standard Test Method for Interfacial Tension of Oil AgainstWater by the Ring Method
Standard Test Methods for Calculated Cetane Index of DistillateFuels IP Designation: 364/84; E1-2000
R(2000)
Standard Specification for Emulsified Asphalt
Standard Practice for Sampling Bituminous Paving Mixtures
Standard Test Method for Rubber Property - Volume Resistivity ofElectrically Conductive and Antistatic
Products E1-2000 R(2000)
Standard Specification for Mixing Plants for Hot- Mixed,Hot-Laid Bituminous Paving Mixtures
Standard Terminology of Packaging and Distribution Environments
Standard Test Method for Pressure-Sensitive Adhesive- CoatedTapes Used for Electrical and Electronic
Applications
Standard Test Method for Apparent Shear Strength ofSingle-Lap-Joint Adhesively Bonded Metal Specimens by
Tension Loading(Metal-To-Metal)

Standard Test Method for Haze and Luminous Transmittance ofTransparent Plastics
Standard Test Method for Initial Tear Resistance of Plastic Filmand Sheeting
Standard Test Method for Measurement of Dry-Film Thickness ofOrganic Coatings Using Micrometers
R(2001)
Standard Practice for Conducting Exterior Exposure Tests ofPaints on Wood
Standard Test Method for Determining Total Nitrogen in Resinsand Plastics R(1998)
Standard Practice for Conducting Exterior Exposure Tests ofPaints on Steel
Standard Test Method for Hydrogen in Petroleum Fractions
Standard Test Method for Fiber Analysis of Paper and PaperboardTAPPI T 401 om-88 R(1999)
Standard Test Method for Stiffness Properties of Plastics as aFunction of Temperature by Means of a Torsion
Test
Standard Test Method for Resistance of Transparent Plastics toSurface Abrasion
Standard Specification for Poly(Vinyl Chloride) Jacket for Wireand Cable
Standard Specification for Rubber Insulating Blankets
Standard Specification for Rubber Insulating Covers
Standard Specification for Rubber Insulating Line Hose R(1999)
Standard Test Method for Measuring Rubber Deterioration - CutGrowth Using Ross Flexing Apparatus E11999 R(1999)
Standard Test Methods for Rubber Property - Stiffening at LowTemperatures: Flexible Polymers and Coated
Fabrics R(1997)
Standard Test Method for Rubber Property - Resilience Using aRebound Pendulum R(2000)
Standard Specifications for Flexible Cellular Materials - LatexFoam
Standard Specification for Flexible Cellular Materials - Spongeor Expanded Rubber
Standard Test Method for Yarn Number Based on Short- LengthSpecimens
Standard Test Methods for Acidity or Alkalinity of Water R(1996)
Standard Test Methods for Iron in Water
Standard Specification for Rubber - Concentrated, AmmoniaPreserved, Creamed, and Centrifuged Natural
Latex
Standard Test Method for Distillation Range of Volatile OrganicLiquids IP Designation: 195/98
(Withdrawn) Standard Practice for Gaging Petroleum and PetroleumProducts API Std 2545; Available as
Separate Reprint Only R(1990)
Standard Test Methods for Evaluating Nonwoven Fabrics
Standard Test Method for Boiling Point of Engine CoolantsR(1998)
Standard Test Method for Reserve Alkalinity of Engine Coolantsand Antirusts
Standard Test Method for Density or Relative Density of EngineCoolant Concentrates and Engine Coolants by
the Hydrometer
Standard Test Methods for Water in Engine Coolant Concentrate bythe Karl Fischer Reagent Method
Standard Test Methods for Electrical Conductivity andResistivity of Water R(1999)
Standard Test Method for Hardness in Water
Standard Test Method for Kauri-Butanol Value of HydrocarbonSolvents R(2001)
Standard Test Methods for Chemical Analysis of Blue PigmentsR(1999)
Standard Specification for Aggregate for Single or MultipleBituminous Surface Treatments
Standard Test Methods for Amount of Material in Soils Finer Thanthe No. 200 (75-Micrometer) Sieve

Standard Test Method for Piles under Static Axial CompressiveLoad E1-1994 R(1994)
Standard Test Method for Blocking Point of Potentially AdhesiveLayers
Standard Practice for Effect of Moisture and Temperature onAdhesive Bonds
Standard Specification for Methyl Isobutyl Ketone R(1997)
Standard Test Method for Distillation of Petroleum Products atReduced Pressure
Standard Test Method for Specific Resistance (Resistivity) ofElectrical Insulating Liquids
Standard Test Method for Rubber Deterioration - Surface OzoneCracking Outdoors or Chamber (Triangular
Specimens)
Standard Guide for pH of Aqueous Solutions of Soaps andDetergents
Standard Practice for Sampling and Preparing Aqueous Solutionsof Engine Coolants or Antirusts for Testing
Purposes
Standard Test Methods for Fluoride Ion in Water
Standard Test Methods for Resistance of Adhesives to CyclicLaboratory Aging Conditions E1-1997
Standard Test Method for Flexural Strength of Adhesive BondedLaminated Assemblies
Standard Test Methods for Pallets and Related StructuresEmployed in Materials Handling and Shipping
Standard Test Method for Bulk Specific Gravity and Density ofCompacted Bituminous Mixtures Using Coated
Samples E1-1998
Standard Specification for Reagent Water
Standard Test Method for Bearing Capacity of Soil for StaticLoad and Spread Footings
Standard Specification for Calcium Carbonate Pigments R(1999)
Standard Test Method for Viscosity by Ford Viscosity Cup R(1999)
Standard Test Methods for Volatile Loss from Plastics UsingActivated Carbon Methods E1-1999 R(1999)
Standard Test Methods for Common Properties of Certain Pigments
Standard Test Method for Color of Clear Liquids (Platinum-CobaltScale)
Standard Test Method for Fineness of Dispersion ofPigment-Vehicle Systems by Hegman-Type Gage
Standard Test Method for Sieve Analysis of Glass Spheres E1-1994R(1994)
Standard Test Method for Density and Relative Density (SpecificGravity) of Liquids by Bingham Pycnometer
R(1998)
Standard Test Method for Refractive Index and RefractiveDispersion of Hydrocarbon Liquids
Standard Specification for Emulsified Asphalt Used as aProtective Coating for Roofing R(2000)
Standard Test Method for Rubber Property - Compression Set atLow Temperatures E1-1998 R(1997)
Standard Test Methods for Resistance of Plastic Materials toAbrasion
Standard Test Method for Bromide Ion in Water R(1999)
Standard Guide for Petroleum Measurement Tables API Standard:API MPMS Ch.11.1; IP Designation: 200/80
(90); BSI Handbook; E1-1997 R(1997)
Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors
Volume I Table 5A - GeneralizedCrude Oils Correction of Observ
Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors
Volume II Table 5B - GeneralizedProducts Correction of Observe
Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors
Volume IV Table 23A -Generalized Crude Oils Correction of Obse

Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors
Volume VI Table 24C - VolumeCorrection Factors for Individual
Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors
Volume VII Table 53A -Generalized Crude Oils Correction of Obs
Standard Test Methods for Chemical Oxygen Demand (DichromateOxygen Demand) of Water
Standard Test Methods for Nonvolatile Content of Resin SolutionsR(2001)
Standard Test Method for Leakage Tendencies of Automotive WheelBearing Greases R(1999)
Standard Test Method for Sulfur in Petroleum Products (LampMethod) IP Designation: 107/86
Standard Specification for Pentachlorophenol E1-1997 R(1997)
Standard Test Method for Corrosive Sulfur in ElectricalInsulating Oils IP Designation: 315/86
Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors
Volume VIII Table 53B -Generalized Products Correction of Obse
Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors
Volume IX Table 54C - VolumeCorrection Factors for Individual
Standard Guide for Petroleum Measurement Tables Manual ofPetroleum Measurement Standards Chapter 11.1
- Volume Correction FactorsVolume XIII Table 5D - Generalized
Standard Test Method for pH of Engine Coolants and AntirustsE1-1998 R(1997)
Standard Test Methods for pH of Water
Standard Test Method for Odor of Volatile Solvents and Diluents
Standard Test Method for Density, Relative Density (SpecificGravity), or API Gravity of Crude Petroleum and
Liquid Petroleum Products byHydrometer Method API Design
Standard Test Method for Phthalic Anhydride Content of AlkydResins and Esters Containing Other Dibasic
Acids (Gravimetric) E1-1996R(1996)
Standard Test Method for Effect of Household Chemicals on Clearand Pigmented Organic Finishes R(1998)
Standard Test Method for Flash Point and Fire Point of Liquidsby Tag Open-Cup Apparatus E1-1997 R(1997)
Standard Specification for Rubber Sheet Gaskets R(2000)
Standard Test Method for Tuft Bind of Pile Yarn Floor CoveringsDiscontinued November 1995 and Reinstated
Standard Test Methods for Moisture in Cellulose R(1998)
Standard Practice for Rubber - Standard Temperatures for Testing
Standard Test Method for Nonvolatile Matter in Volatile Solventsfor Use in Paint, Varnish, Lacquer, and
Related Products E1-2000 R(2000)
Standard Test Method for Water in Volatile Solvents (KarlFischer Reagent Titration Method) R(1999)
Standard Practice for Reporting Particle Size Characteristics ofPigments R(1997)
Standard Test Method for Acid Number (Empirical) of Syntheticand Natural Waxes
Standard Test Method for Stiffness of Fabrics E1-1999
Standard Test Methods for Chemical Analysis of White TitaniumPigments R(1999)
Standard Test Method for Unsaponifiable Matter in Alkyd Resinsand Resin Solutions R(1998)
Standard Test Method for Fatty Acid Content of Alkyd Resins andAlkyd Resin Solutions R(1998)
Standard Test Method for Rubber Property - InternationalHardness R(1999)
(Withdrawn) Standard Test Methods for Rubber from Synthetic Sources- Chemical Analysis Replaced by
D5667, D5668, D5775 and D5805 in July 1997

Standard Practice for Rubber and Rubber Latices - Nomenclature

Standard Test Method for Twist in Yarns by Direct- Counting
Standard Test Method for Tearing Strength of Fabrics byFalling-Pendulum Type (Elmendorf) Apparatus
Standard Test Methods for Ammonia Nitrogen in Water
Standard Practice for Outdoor Weathering of Plastics
Standard Test Method for Micronaire Reading of Cotton Fibers
Standard Test Method for Rubber Property - Elongation atSpecific Stress R(1996)
(Withdrawn) Standard Specification for Polytetrafluoroethylene(PTFE) Molding and Extrusion Materials
Replaced by D4894 and D4895
Standard Test Methods for Fully Cured Silicone Rubber- CoatedGlass Fabric and Tapes for Electrical Insulation
Standard Test Method for Volatile Matter in Tricresyl PhosphateR(2001)
Standard Test Methods for Indentation Hardness of OrganicCoatings
Standard Test Method for Density of Liquid Coatings, Inks, andRelated Products
Standard Test Method for Oil Absorption of Pigments byGardner-Coleman Method
Standard Test Method for Amylaceous Matter in Adhesives
Standard Test Method for Nonvolatile Content of AqueousAdhesives
Standard Test Method for Solidification Point of IndustrialOrganic Chemicals
Standard Test Method for Diffuse Light Transmission Factor ofReinforced Plastics Panels
Standard Practice for Filtered Open-Flame Carbon-Arc Exposuresof Plastics
Standard Test Method for ASTM Color of Petroleum Products (ASTMColor Scale) IP Designation: 196/97
Standard Test Method for Density of Plastics by theDensity-Gradient Technique
Standard Test Methods for Carbon Black - Ash Content
Standard Test Methods for Carbon Black - Heating Loss R(2000)
Standard Test Method for Carbon Black - Iodine Adsorption Number
Standard Test Methods for Carbon Black - pH Value R(2000)
Standard Test Method for Carbon Black, Pelleted - Pour DensityE1-1999
Standard Test Method for Width of Leather
Standard Test Method for Vicat Softening Temperature of Plastics
Standard Specification for Acrylonitrile-Butadiene- Styrene(ABS) Plastic Pipe, Schedules 40 and 80
(Discontinued) Standard Test Method for Qualitative Detection ofRosin in Varnishes E1-1993 R(1993)
Standard Test Method for Color of Transparent Liquids (GardnerColor Scale)
Standard Test Method for Viscosity of Transparent Liquids byBubble Time Method
(Withdrawn) Standard Specification For Extruded Acrylic PlasticSheet *NOT CURRENT DOCUMENT
(Withdrawn) Standard Test Method for Vanadium in Heavy Fuel OilE1-1993; Withdrawn April 1997; *NOT
CURRENT DOCUMENT
Standard Test Method for Calculation of Volume and Weight ofIndustrial Aromatic Hydrocarbons R(2000)
Standard Test Method for Density and Unit Weight of Soil inPlace by the Sand-Cone Method
(Withdrawn) Standard Test Method for Resistance to Plastic Flowof Bituminous Mixtures Using Marshall
Apparatus Withdrawn February 1998

(Discontinued) Standard Specification for Flexible CellularMaterials - Vinyl Chloride Polymers and
Copolymers (Open-Cell Foam)Discontinued 1998; IHS Notified 07/199
Standard Test Methods for Linear Density of Textile Fibers
Standard Test Method for Filler Content of Phenol, Resorcinol,and Melamine Adhesives
Standard Test Method for Penetration Test and Split- BarrelSampling of Soils
Standard Test Method for Dynamic Shock CushioningCharacteristics of Packaging Material
Standard Test Method for Time-To-Failure of Plastic Pipe underConstant Internal Pressure
Standard Test Method for Resistance to Short-Time HydraulicPressure of Plastic Pipe, Tubing, and Fittings
Standard Terminology for Abbreviated Terms Relating to Plastics
Standard Test Method for Carbon Black in Olefin Plastics
Standard Test Method for Nitrogen Dioxide Content of theAtmosphere (Griess-Saltzman Reaction) E1-2000
R(2000)
Standard Test Method for Oxides of Nitrogen in GaseousCombustion Products (Phenol-Disulfonic Acid
Procedures)
Standard Test Method for Corrosion Produced by Leather inContact with Metal
Standard Test Method for Acidity in Volatile Solvents andChemical Intermediates Used in Paint, Varnish,
Lacquer, and Related ProductsR(1999)
Standard Test Method for Alkalinity in Acetone R(1999)
Standard Test Method for Ester Value of Solvents and ThinnersR(2001)
Standard Test Methods for Carbon Black - Sulfur Content
Standard Test Method for Compressive Properties of RigidCellular Plastics
Standard Test Method for Tensile and Tensile Adhesion Propertiesof Rigid Cellular Plastics R(1995)
Standard Test Method for Rubber Property - Abrasion Resistance(Footwear Abrader) R(2000)
Standard Test Method for Water in Phenol and Related Materialsby the Iodine Reagent Method
Standard Practice for Making and Curing Soil-Cement Compressionand Flexure Test Specimens in the
Laboratory
Standard Test Methods for Compressive Strength of MoldedSoil-Cement Cylinders
Standard Test Methods for Drying, Curing, or Film Formation ofOrganic Coatings at Room Temperature
R(1999)
(Withdrawn) Standard Test Methods for Elasticity or Toughness ofVarnishes
Standard Test Methods for Resistance of Dried Films of Varnishesto Water and Alkali E1-1996 R(1996)
Standard Test Methods for Epoxy Content of Epoxy Resins
Standard Test Method for Evaluation of Painted or CoatedSpecimens Subjected to Corrosive Environments
R(2000)
Standard Specification for Flexible Cellular Materials - VinylChloride Polymers and Copolymers (Closed-Cell
Foam)
Standard Specification for Glass Fabrics (Woven and Treated) forRoofing and Waterproofing
Standard Test Methods for Polytetrafluoroethylene Tubing
Standard Test Methods for Copper in Water
(Discontinued) Standard Test Method for Determining the Amountof Particulate Matter in the Atmosphere by
Measurement of the LightAbsorbance of a Filtered Sample E1Standard Test Method for Tensile Properties of Plastics by Useof Microtensile Specimens
Standard Test Methods for Impact Resistance of Plastic Film bythe Free-Falling Dart Method

Standard Specification for Isobutyl Acetate (95% Grade)

Standard Specification for Isobutyl Alcohol R(1999)
Standard Test Method for Water Miscibility of Water- SolubleSolvents
Standard Test Methods for Hydrolyzable Chloride Content ofLiquid Epoxy Resins R(1996)
Standard Practice for Testing Water Resistance of Coatings UsingWater Fog Apparatus
Standard Test Method for Oil Separation from Lubricating GreaseDuring Storage E1-2000 R(2000)
(Withdrawn) Standard Test Method for Determination of Water inLiquid Petroleum Products by Karl Fischer
Reagent
Standard Test Method for Transparency of Plastic Sheeting
Standard Test Method for Refractive Index of Viscous Materials
Standard Specification for Preformed Expansion Joint Filler forConcrete Paving and Structural Construction
(Nonextruding and ResilientBituminous Types)
Standard Specification for Preformed Sponge Rubber and CorkExpansion Joint Fillers for Concrete Paving and
Structural ConstructionE1-1996 R(1996)
Standard Specification for Adhesive for Acoustical MaterialsDiscontinued 1993 and Reinstated
Standard Specification for Poly(Vinyl Chloride) (PVC) PlasticPipe, Schedules 40, 80, and 120
Standard Test Method for Water and Sediment in Fuel Oils by theCentrifuge Method (Laboratory Procedure) IP
Designation: MPMS Chapter 10.6;British Standard 2882
Standard Practice for Carbon Black - Sampling Packaged ShipmentsR(1997)
Standard Test Method for Measuring Thickness of Leather TestSpecimens
Standard Test Method for Apparent Viscosity of Plastisols andOrganosols at Low Shear Rates
Standard Test Method for Naphthalene Hydrocarbons in AviationTurbine Fuels by Ultraviolet
Spectrophotometry
Standard Test Methods for Chemical Analysis of StrontiumChromate Pigment R(1999)
Standard Test Method for Package Stability of Paint
Standard Specification for Jet-Fuel-Resistant Concrete JointSealer, Hot-Applied Elastic Type
Standard Specification for Mineral Aggregate Used on Built-UpRoofs R(2000)
Standard Test Method for Moisture in Mineral Aggregate Used onBuilt-Up Roofs E1 R(1999)
Standard Test Method for Detection and Measurement of PartialDischarge (Corona) Pulses in Evaluation of
Insulation Systems R(1998)
Standard Specification for Rubber Rings for Asbestos- CementPipe R(2000)
(Discontinued) Standard Practice for Elevated Temperature AgingUsing a Tubular Oven Discontinued 1998;
IHS Notified 08/1999; *NOT CURRENTDOCUMENT
Standard Test Method for Density of Adhesives in Fluid Form
Standard Test Method for Peel Resistance of Adhesives (T-PeelTest) E1-2001
Standard Test Method for Foaming Tendencies of Engine Coolantsin Glassware
Standard Test Method for CBR (California Bearing Ratio) ofLaboratory-Compacted Soils
Standard Test Method for Turbidity of Water
Standard Test Method for Static and Kinetic Coefficients ofFriction of Plastic Film and Sheeting
Standard Test Methods for Apparent Density, Bulk Factor, andPourability of Plastic Materials
(Discontinued) Standard Practice for Sampling of PlasticsDiscontinued 1998;IHS Notified 08/1999; *NOT
CURRENT DOCUMENT R(1989)
Standard Test Method for Linear Density of Yarn (Yarn Number) bythe Skein Method

Standard Test Methods for Rubber Property - Shrinkage of Raw andCompounded Hot-Polymerized StyreneButadiene Rubber (SBR)
Standard Test Methods for Particle Size (Sieve Analysis) ofPlastic Materials
Standard Test Method for Propagation Tear Resistance of PlasticFilm and Thin Sheeting by Pendulum Method
(Withdrawn) Standard Test Method for Yellowness Index ofPlastics E1-1988 R(1988)
(Discontinued) Standard Specification for Rigid Poly(VinylChloride) Plastic Sheet R(1988)
Standard Practice for Preparation of Compression- MoldedPolyethylene Test Sheets and Test Specimens
Standard Test Method for Alpha Particle Radioactivity of Water
(Withdrawn) Standard Test Method for Load-Carrying Capacity ofPetroleum Oil and Synthetic Fluid Gear
Lubricants E1-1994; Discontinued 1996
Standard Test Method for Acetone Tolerance of Heat- BodiedDrying Oils E1-1995 R(1995)
Standard Test Method for Ash in Drying Oils and Fatty AcidsE1-1995 R(1995)
Standard Test Method for Quantitative Determination of Break inDrying Oils E1-1995 R(1995)
Standard Test Method for Foots in Raw Linseed Oil (VolumetricMethod) E1-1995 R(1995)
Standard Test Method for Hydroxyl Value of Fatty Oils and AcidsE1-1995 R(1995)
Standard Test Method for Loss on Heating of Drying Oils E1-1995R(1995)
Standard Test Method for Saponification Value of Drying Oils,Fatty Acids, and Polymerized Fatty Acids
R(1995)
Standard Test Method for Tung Oil Quality E1-1995 R(1995)
Standard Test Method for Unsaponifiable Matter in Drying Oils,Fatty Acids, and Polymerized Fatty Acids
R(1998)
Standard Terminology Relating to Paper and Paper Products
Standard Practice for Methods of Closing, Sealing, andReinforcing Fiberboard Boxes
Standard Test Method for Acid Value of Fatty Acids andPolymerized Fatty Acids R(1998)
Standard Test Method for Fatty Acid Composition by Gas- LiquidChromatography of Methyl Esters E1-1995
R(1995)
Standard Classification System for Rubber Products in AutomotiveApplications SAE J200
Standard Test Methods for Evaluation of Total Sulfation Activityin the Atmosphere by the Lead Dioxide
Technique
Standard Practice for Preparing Coal Samples for AnalysisE1-2001
(Discontinued) Standard Test Method for Gross Calorific Value ofCoal and Coke by the Adiabatic Bomb
Calorimeter
Standard Test Methods of Sampling and Chemical Analysis ofChlorine-Containing Bleaches E1-1995 R(1995)
Standard Test Method for Cloud Point of Nonionic SurfactantsR(1997)
Standard Specification for Cutback Asphalt (Slow- Curing Type)
Standard Specification for Cutback Asphalt (Medium- Curing Type)
Standard Test Methods for Water Vapor Content of ElectricalInsulating Gases by Measurement of Dew Point
Standard Test Method for Theoretical Maximum Specific Gravityand Density of Bituminous Paving Mixtures
Standard Test Method for Solubility of Asphalt Materials inTrichloroethylene

Standard Test Methods for Measuring Zipper Dimensions

Standard Specification for Marine Fuels R(1998)
Standard Test Methods for Total, Primary, Secondary, andTertiary Amine Values of Fatty Amines,
Amidoamines, and Diamines by RefereePotentiometric Method E1-1998 R(1
Standard Test Method for Print Resistance of Lacquers
Standard Test Method for Dynamic Water Resistance of Shoe UpperLeather by the Maeser Water Penetration
Tester
Standard Specification for Polyethylene Film and Sheeting
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule40 E1-1999
Standard Test Methods for Nonvolatile Matter in HalogenatedOrganic Solvents and Their Admixtures R(2000)
Standard Test Methods for Specific Gravity of HalogenatedOrganic Solvents and Their Admixtures R(2000)
Standard Test Method for Oxidation Stability of InhibitedMineral Insulating Oil by Pressure Vessel
Standard Practice for Rock Core Drilling and Sampling of Rockfor Site Investigation
Standard Practice for Oven Heat Stability of Poly(VinylChloride) Compositions R(1997)
Standard Specification for FEP-Fluorocarbon Molding andExtrusion Materials
Standard Test Method for Determining Dimensions of ThermoplasticPipe and Fittings
Standard Test Method for Coated Fabrics - Low- Temperature BendTest R(1998)
Standard Test Methods for Rubber Property - Brittleness Point ofFlexible Polymers and Coated Fabrics
R(2000)
Standard Test Method for Adequacy of Fusion of ExtrudedPoly(Vinyl Chloride) (PVC) Pipe and Molded
Fittings by Acetone Immersion
Standard Test Method for Smoke Density in Flue Gases fromBurning Distillate Fuels R(1999)
Standard Practice for Conversion of Kinematic Viscosity toSaybolt Universal Viscosity or to Saybolt Furol
Viscosity E1, E2-2000 R(1999)
Standard Test Method for Basic Calibration of Master Viscometersand Viscosity Oil Standards
Standard Test Method for pH of Aqueous Extracts of Wool andSimilar Animal Fibers R(2000)
Standard Test Method for Density and Unit Weight of Soil inPlace by the Rubber Balloon Method
Standard Test Methods for Calibration of LaboratoryMechanical-Rammer Soil Compactors E1-1997 R(1996)
Standard Test Method for Kinematic Viscosity of Asphalts(Bitumens) IP Designation: 319/84 (89)
Standard Test Method for Viscosity of Asphalts by VacuumCapillary Viscometer IP Designation: 222/84 (89)
Standard Test Method for Folding Endurance of Paper by theM.I.T. Tester
Standard Test Method for Concentration of Formaldehyde Solutions
Standard Test Methods for Rheological Properties of Non-NewtonianMaterials by Rotational (Brookfield Type)
Viscometer
Standard Test Method for Adhesion of Organic Coatings by ScrapeAdhesion
Standard Test Method for Bursting Strength of Leather by theBall Method
Standard Test Method for Breaking Strength of Leather by theGrab Method
Standard Test Method for Tensile Strength of Leather
Standard Test Method for Grain Crack and Extension of Leather bythe Mullen Test
Standard Test Method for Slit Tear Resistance of Leather

Standard Test Method for Compressibility of Leather

Standard Practice for Wet Preparation of Soil Samples forParticle-Size Analysis and Determination of Soil
Constants R(1998)
Standard Test Method for Creep Properties of Package CushioningMaterials
(Withdrawn) Standard Practice for Rubber Properties in ForcedVibration Replaced by D5992
Standard Specification for Solvent Cement forAcrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
Standard Test Method for Freeze-Thaw Resistance of Water-BorneCoatings
Standard Test Method for Calculation of Color Differences fromInstrumentally Measured Color Coordinates
R(2000)
Standard Test Method for Identification of Oils and Oil Acids inSolvent-Reducible Paints R(1999)
Standard Practice for Testing Water Resistance of Coatings in100% Relative Humidity
Standard Practice for Detergent Resistance of Organic Finishes
Standard Test Method for Metal Corrosion by Halogenated OrganicSolvents and Their Admixtures R(2000)
Standard Test Method for Extractable Matter in Textiles
Standard Practice for Sampling Yarn for Testing
(Discontinued) Standard Test Method for Tearing Strength ofWoven Fabrics by the Tongue (Single Rip)
Method (Constant-Rate-Of-TraverseTensile Testing Machine) *NOT C
Standard Test Method for Wear Preventive Characteristics ofLubricating Grease (Four-Ball Method) R(1996)
Standard Test Method for Analysis of High-Purity n- Heptane andIsooctane by Capillary Gas Chromatography
R(1998)
Standard Practice for Calculating Viscosity Index from KinematicViscosity at 40 and 100 Degrees C IP
Designation: 226/91 (95); BritishStandard 4459 R(1998)
Standard Test Method for Oxidation Stability of Steam TurbineOils by Rotating Pressure Vessel
Standard Test Method for Trace Sediment in Lubricating Oils
Standard Test Method for Particulate Contaminant in AviationFuel by Line Sampling IP Designation: 216/97
Standard Specification for Acrylonitrile-Butadiene- Styrene(ABS) Plastic Pipe (SDR-PR)
Standard Test Method for Apparent Hoop Tensile Strength ofPlastic or Reinforced Plastic Pipe by Split Disk
Method
Standard Test Methods for Liquid-Contaminant, Inclined- PlaneTracking and Erosion of Insulating Materials
Standard Practice for Underground Installation of ThermoplasticPipe for Sewers and Other Gravity-Flow
Applications
Standard Test Method for Resistance of Shoe Upper Leather toArtificial Perspiration
Standard Test Method for Methylene Blue Active SubstancesE1-1995 R(1995)
Standard Test Method for Tensile Properties of Glass FiberStrands, Yarns, and Rovings Used in Reinforced
Plastics
Standard Test Method for Short-Beam Strength of Polymer MatrixComposite Materials and Their Laminates
E1-2000
Standard Test Method for Apparent Density of Leather
Standard Test Method for Antimony Oxide in White PigmentSeparated from Solvent-Reducible Paints R(1999)
Standard Test Method for Trace Impurities in Monocyclic AromaticHydrocarbons by Gas Chromatography

Standard Test Method for Volatile Content of Coatings E1-2001

Standard Test Method for Tensile Properties of Organic Coatings
Standard Test Method for Pigment Content of Solvent- ReduciblePaints R(1999)
Standard Practice for Separation of Vehicle from Solvent-ReduciblePaints R(1999)
Standard Test Method for Heat of Combustion of Hydrocarbon Fuelsby Bomb Calorimeter (High-Precision
Method)
Standard Test Method for Color of Dyed Aviation GasolinesE1-2001 R(2001)
(Withdrawn) Standard Test Method for Viscosity of Epoxy Resinsand Related Components
Standard Specification for Cationic Emulsified Asphalt
Standard Test Method for Determination of External LoadingCharacteristics of Plastic Pipe by Parallel- Plate
Loading
(Withdrawn) Standard Specification for Perforated,Laminated-Wall Bituminized Fiber Pipe for General
Drainage *NOT CURRENTDOCUMENT
Standard Test Method for Sand Equivalent Value of Soils and FineAggregate
Standard Test Method for Oxidation Stability of MineralInsulating Oil
Standard Test Method for Determination of the Impact Resistanceof Thermoplastic Pipe and Fittings by Means
of a Tup (Falling Weight)
Standard Specification for Polyethylene (PE) Plastic Pipe,Schedules 40 and 80, Based on Outside Diameter
Standard Test Method for Identification of Carboxylic Acids inAlkyd Resins E1-1996 R(1996)
Standard Test Method for Specular Gloss of Plastic Films andSolid Plastics
Standard Specification for Threaded Poly(Vinyl Chloride) (PVC)Plastic Pipe Fittings, Schedule 80
Standard Specification for Poly(Vinyl Chloride) (PVC) PlasticPipe Fittings, Schedule 40
Standard Specification for Poly(Vinyl Chloride) (PVC) PlasticPipe Fittings, Schedule 80
Standard Specification for Sulfur Hexafluoride
Standard Specification for Felt
Standard Test Method for Accelerated Evaluation of WoodPreservatives for Marine Services by Means of
Small-Size Specimens E1-1995R(1994)
Standard Test Method for Scrub Resistance of Wall Paints
Standard Practice for Description and Identification of Soils(Visual-Manual Procedure)
Standard Test Method for Forms of Sulfur in Coal R(1998)
Standard Test Method for Thermal Shock Sensitivity of Solid FilmLubricants E1-1998 R(1998)
Standard Test Method for Compatibility of Materials with LiquidOxygen (Impact Sensitivity Threshold and
Pass-Fail Techniques)
Standard Specification for Reinforced Epoxy Resin Gas PressurePipe and Fittings
Standard Test Methods for Complex Permittivity (DielectricConstant) of Solid Electrical Insulating Materials at
Microwave Frequenciesand Temperatures to 1650 Degree
Standard Test Method for Viscosity and Viscosity Change AfterStanding at Low Temperature of Aircraft
Turbine Lubricants R(1998)
Standard Test Method for Vapor-Liquid Ratio of Spark- IgnitionEngine Fuels
Standard Test Method for Apparent Viscosity of Adhesives HavingShear-Rate-Dependent Flow Properties
R(1997)
Standard Practice for Classifying Visual Defects inGlass-Reinforced Plastic Laminate Parts
Standard Practice for Xenon-Arc Exposure of Plastics Intendedfor Outdoor Applications
Standard Test Method for Isocyanate Groups in Urethane Materialsor Prepolymers

Standard Test Method for Field Vane Shear Test in Cohesive Soil
Standard Test Method for Total Organic Carbon in Water E1-1994
Standard Test Method for Phenols in Water by Gas- LiquidChromatography
Standard Test Method for Puncture-Propagation Tear Resistance ofPlastic Film and Thin Sheeting
Standard Test Method for Ignition Loss of Cured ReinforcedResins
(Withdrawn) Standard Test Method for Hydrostatic CompressiveStrength of Glass-Reinforced Plastic Cylinders
E1-1990; Discontinued 1996R(1990)
Standard Test Method for Evaporation Loss of Lubricating Greasesover Wide-Temperature Range
Standard Test Method for Measurement of Extreme- PressureProperties of Lubricating Grease (Four-Ball
Method)
Standard Specification for Plastic Insert Fittings forPolyethylene (PE) Plastic Pipe
Standard Test Method for Total Ash in Leather
Standard Test Method for Sulfur in Petroleum Products byWavelength Dispersive X-Ray Fluorescence
Spectrometry
Standard Test Method for Endurance (Wear) Life and Load-CarryingCapacity of Solid Film Lubricants (Falex
Pin and Vee Method) R(1998)
Standard Specification for Preformed Polychloroprene ElastomericJoint Seals for Concrete Pavements R(1998)
Standard Test Method for Rubber Property - Resilience byVertical Rebound
Standard Test Method for Corrosion Characteristics of Solid FilmLubricants E1-2000
Standard Guide for Preparation of Metal Surfaces for AdhesiveBonding R(1995)
(Withdrawn) Standard Test Methods for Moisture in Textiles
Standard Specification for Acrylonitrile-Butadiene- Styrene(ABS) Schedule 40 Plastic Drain, Waste, and Vent
Pipe and Fittings
Standard Specification for Polybutylene (PB) Plastic Pipe(SIDR-PR) Based on Controlled Inside Diameter
Standard Specification for Poly(Vinyl Chloride) (PVC) PlasticDrain, Waste, and Vent Pipe and Fittings
Standard Specification for Polybutylene (PB) Plastic Tubing
Standard Test Method for Measuring Wear Properties of FluidLubricants (Falex Pin and Vee Block Method)
R(1999)
Standard Test Methods for Heat-Shrinkable Tubing for ElectricalUse
Standard Specification for Joints for IPS PVC Pipe Using SolventCement
Standard Specification for Socket-Type Polyethylene Fittings forOutside Diameter-Controlled Polyethylene
Pipe and Tubing
Standard Test Method for Volume Nonvolatile Matter in Clear orPigmented Coatings R(1998)
Standard Test Method for Determination of the Pigment Content ofSolvent-Reducible Paints by High-Speed
Centrifuging R(1999)
Standard Practice for Rubber Chemicals - Determination ofInfrared Absorption Characteristics R(1998)
Standard Test Method for Water and Sediment in Middle DistillateFuels by Centrifuge E1-2001 R(2001)
Standard Test Method for Calibration and Operation of the FalexBlock-On-Ring Friction and Wear Testing
Machine R(1998)

Standard Test Methods for Bonded, Fused, and Laminated ApparelFabrics R(1995)
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipeand Fittings
Standard Test Methods for Void Content of Reinforced Plastics
Standard Specification for Polyethylene (PE) Plastic Tubing
(Withdrawn) Standard Specification for Poly(Vinyl Chloride)(PVC) Plastic Tubing *NOT CURRENT
DOCUMENT
(Withdrawn) Standard Methods for Chemical Analysis of TribasicLead Phosphosilicate *NOT CURRENT
DOCUMENT
Standard Specification for Acrylonitrile-Butadiene- Styrene(ABS) Sewer Pipe and Fittings Errata
Standard Practice for Underground Installation of ThermoplasticPressure Piping
Standard Test Method for Resistance of Organic Coatings to theEffects of Rapid Deformation (Impact) E11999 R(1999)
Standard Test Method for Preparation of Methyl Esters from Oilsfor Determination of Fatty Acid Composition
by Gas-Liquid ChromatographyR(1998)
Standard Specification for Ozone-Resistant Ethylene- AlkenePolymer Insulation for Wire and Cable
Standard Guide for Testing Filiform Corrosion Resistance ofOrganic Coatings on Metal
Standard Test Method for Purity of Methyl Ethyl Ketone by GasChromatography
Standard Test Method for Chromic Oxide in Leather (PerchloricAcid Oxidation) R(1998)
Standard Test Method for pH of Leather
Standard Practice for Sampling Leather for Physical and ChemicalTests American Leather Chemists Assn.
Standard Method J1-1956 R(1996)
Standard Test Method for Measuring the Relative Stiffness ofLeather by Means of a Torsional Wire Apparatus
Standard Specification for Asphalt Roof Cement E1-1997 R(1997)
Standard Specification for Aluminum-Pigmented Asphalt RoofCoatings, Non-Fibered, Asbestos Fibered, and
Fibered Without Asbestos
Standard Specification for Lubricant for Installation ofPreformed Compression Seals in Concrete Pavements
R(1998)
Standard Test Method for Obtaining Hydrostatic Design Basis forThermoplastic Pipe Materials
Standard Test Method for Water Absorption of Rigid CellularPlastics
Standard Test Method for Density of Smoke from the Burning orDecomposition of Plastics
Standard Specification for Chlorinated Poly(Vinyl Chloride)(CPVC) Plastic Hot- and Cold-Water Distribution
Systems
Standard Specification for Styrene-Rubber (SR) Plastic DrainPipe and Fittings
Standard Practice for Making Solvent-Cemented Joints withPoly(Vinyl Chloride) (PVC) Pipe and Fittings
Standard Test Method for Open-Cell Content of Rigid CellularPlastics by the Air Pycnometer R(1998)
Standard Test Method for Adhesion of Pressure- Sensitive Tape toFiberboard at 90 Degree Angle and Constant
Stress R(1999)
Standard Test Method for Measuring the Minimum OxygenConcentration to Support Candle-like Combustion
of Plastics (Oxygen Index)
Standard Test Methods for Moisture in Activated Carbon

Standard Test Method for Nitrogen Content (Kjeldahl) and HideSubstance Content of Leather
Standard Test Method for Research and Motor Method OctaneRatings Using On-Line Analyzers IP
Designation: 360/96 R(1999)
Standard Test Method for Boiling Range Distribution of PetroleumFractions by Gas Chromatography
Standard Test Method for Base Number of Petroleum Products byPotentiometric Perchloric Acid Titration IP
Designation: 276/95
Standard Test Methods for Sulfur Dioxide Content of theAtmosphere (West-Gaeke Method)
Standard Test Method for Determining Durability of AdhesiveJoints Stressed in Shear by Tension Loading
Standard Test Methods for Density of Soil and Soil- Aggregate inPlace by Nuclear Methods (Shallow Depth)
E1-1997
(Withdrawn) Standard Practice for Rubber Seals - Compatibilitywith Service Fluids *NOT CURRENT
DOCUMENT
Standard Test Method for Apparent Density of Industrial AromaticHydrocarbons R(2000)
Standard Test Methods for Emulsified Bitumens Used as ProtectiveCoatings
Standard Specification for Graded Aggregate Material for Basesor Subbases for Highways or Airports
Standard Test Method for Measuring Break Pattern of Leather(Break Scale)
Standard Test Method for Total Acid Acceptance of HalogenatedOrganic Solvents (Nonreflux Methods)
R(2000)
Standard Test Method for Density of Bituminous Concrete in Placeby Nuclear Methods R(1997)
Standard Test Method for Acidity-Alkalinity of HalogenatedOrganic Solvents and Their Admixtures
Standard Test Methods for Tensile, Compressive, and FlexuralCreep and Creep-Rupture of Plastics
Standard Practice for Determining Application Rate of BituminousDistributors
Standard Specification for Polybutylene (PB) Plastic Pipe(SDR-PR) Based on Outside Diameter E1-1999
Standard Test Method for Flame Height, Time of Burning, and Lossof Mass of Rigid Thermoset Cellular
Plastics in a Vertical Position
(Withdrawn) Standard Specification for Polyethylene and EthyleneCopolymer Plastic Sheeting for Pond, Canal,
and Reservoir Lining Discontinued1996
(Withdrawn) Standard Test Methods for Impact Resistance of Flat,Rigid Plastic Specimens by Means of a Tup
(Falling Weight)
Standard Test Methods for Hookup Wire Insulation
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC)Sewer Pipe and Fittings
(Withdrawn) Standard Test Methods for Carbon Black - SurfaceArea by Nitrogen Adsorption R(1997)
Standard Test Method for Tensile Properties of Polymer MatrixComposite Materials
Standard Practice for Heat Aging of Plastics without LoadR(1997)
Standard Guide for Three-Piece Steel and Tinplate Straight-Walland Necked-In Aerosol Cans E1-2000
Standard Terminology Relating to Aerosol Products
(Withdrawn) Standard Practice for Labeling Aerosol Packages
(Withdrawn) Standard Practice for Reporting Laboratory ResultsWhen Checking Aerosol Containers E1-1991
R(1991)
(Withdrawn) Standard Specification for Safe Fill of AerosolContainers E1-1991 R(1991)
Standard Test Method for Delivery Rate of Aerosol ProductsE1-1999 R(1999)
Standard Test Method of Rapid Pressure Determination ofPressurized Products

(Withdrawn) Standard Practice for Comparison of Spray Patternsof Aerosol Products E1-1991 R(1991)
Standard Test Method for Determination of Leaks in FlexiblePackaging by Bubble Emission
(Withdrawn) Standard Specification for Flexible Poly(VinylChloride) Plastic Sheeting for Pond, Canal, and
Reservoir Lining
Standard Practice for Safe Filling of Low-Pressure PressurizedProducts E1-1997 R(1997)
Standard Test Method for Particle-Size Distribution ofSpace-Insecticide Aerosol R(1993)
Standard Test Method for Aerosol Products for Delivered Mass
(Discontinued) Standard Test Method for Stretch Properties ofFabrics Woven from Stretch Yarns E1-1980
R(1980)
Standard Test Method for Trace Quantities of Sulfur in LightLiquid Petroleum Hydrocarbons by Oxidative
Microcoulometry
Standard Specification for Solvent Cements for Styrene- Rubber(SR) Plastic Pipe and Fittings
Standard Test Method for Rubber Property - Hydrolytic StabilityR(1994)
Standard Specification for Solvent Cements for Transition Jointsbetween Acrylonitrile-Butadiene- Styrene
(ABS) and Poly(Vinyl Chloride) (PVC)Non- Pressure Piping Co
Standard Specification for Joints for Plastic Pressure PipesUsing Flexible Elastomeric Seals
Standard Test Method for Carbon Monoxide in the Atmosphere(Continuous Measurement by Nondispersive
Infrared Spectrometry) E1-2000 R(2000)
Standard Test Method for Fatigue Properties of Adhesives inShear by Tension Loading (Metal/Metal)
Standard Practice for Qualitative Identification of Polymers inEmulsion Paints R(1999)
Standard Test Method for Constituent Content Composite Materials
Standard Test Method for Ash in the Analysis Sample of Coal andCoke from Coal
Standard Test Method for Volatile Matter in the Analysis Sampleof Coal and Coke
Standard Practice for Rubber - Preparation of Pieces for TestPurposes from Products R(1998)
Standard Specification for Joints for Drain and Sewer PlasticPipes Using Flexible Elastomeric Seals
Standard Specification for Unmodified Poly(Vinylidene Fluoride)(PVDF) Molding Extrusion and Coating
Materials
Standard Test Method for Thiol (Mercaptan) Sulfur in Gasoline,Kerosine, Aviation Turbine, and Distillate Fuels
(Potentiometric Method)
Standard Test Method for Total Nitrogen in Lubricating Oils andFuel Oils by Modified Kjeldahl Method
Standard Test Method for Salts in Crude Oil (ElectrometricMethod)
Standard Test Method for Phosphorus in Gasoline
Standard Test Method for Undissolved Water in Aviation TurbineFuels R(1996)
Standard Test Method for Acidity in Aviation Turbine Fuel IPDesignation: 354/81(87)
Standard Practice for General Ambient Air Analyzer ProceduresR(2000)
(Withdrawn) Standard Specification for Fabric- Reinforced,Vulcanized Rubber Sheeting for Pond, Canal, and
Reservoir Lining *NOT CURRENTDOCUMENT
Standard Test Methods for Aromatics in Mineral Spirits by GasChromatography
Standard Specification for Butt Heat Fusion Polyethylene (PE)Plastic Fittings for Polyethylene (PE) Plastic
Pipe and Tubing
Standard Test Method for Separation and Collection ofParticulate and Gaseous Fluorides in the Atmosphere
(SodiumBicarbonate-Coated Glass Tube and Particulate Filter
Standard Practice for Vacuum Distillation of Solvents fromSolvent-Reducible Paints for Analysis R(1998)

Standard Test Method for Evaluating Degree of SurfaceDisfigurement of Paint Films by Microbial (Fungal or
Algal) Growth or Soiland Dirt Accumulation
Standard Test Methods for Flash Point of Liquids by Small ScaleClosed-Cup Apparatus E1-1997
Standard Test Methods for Analysis of White Zinc PigmentsR(1999)
Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
E1-1999 R(1997)
(Withdrawn) Standard Test Method for Gross Calorific Value ofCoal and Coke by the Isoperibol Bomb
Calorimeter Replaced by D5865 Rev A:1999
(Discontinued) Standard Specification for PTFE Resin MoldedSheet Replaced by ASTM D3294-97 R(1996)
Standard Specification for PTFE Resin Skived Tape
Standard Specification for Polybutylene (PB) Plastic Hot- andCold-Water Distribution Systems
Standard Specification for Emulsified Coal-Tar Pitch (MineralColloid Type)
Standard Test Method for Purity of Methyl Isobutyl Ketone by GasChromatography
Standard Test Method for Peel Adhesion of Pressure- SensitiveTape
Standard Test Method for Low Concentrations of Lead, Cadmium,and Cobalt in Paint by Atomic Absorption
Spectroscopy R(1999)
Standard Test Method for Life of Lubricating Greases in BallBearings at Elevated Temperatures
Standard Test Method for Estimation of Hydrogen Content ofAviation Fuels R(2000)
Standard Test Method for Film Hardness by Pencil Test
Standard Specification for Polytetrafluoroethylene (PTFE) ResinCast Film
Standard Test Method for Vanadium in Water R(1998)
Standard Specification for Vinyl-Coated Glass Yarns
Standard Test Method for Tensile Strength and Young's Modulusfor High-Modulus Single-Filament Materials
E1- 1989 R(1989)
Standard Specification for Viscosity-Graded Asphalt Cement forUse in Pavement Construction R(1999)
Standard Test Method for Infiltration Rate of Soils in FieldUsing Double-Ring Infiltrometer
Standard Test Method for Coated Fabrics Abrasion Resistance(Rotary Platform, Double-Head Abrader)
R(1999)
Standard Specification for Liquid Sodium Silicates R(1997)
Standard Test Methods for Water in Halogenated Organic Solventsand Their Admixtures R(2001)
Standard Test Method for Compressive Properties of PolymerMatrix Composite Materials with Unsupported
Gage Section by Shear Loading
Standard Test Method for Enthalpies of Fusion andCrystallization of Polymers by Differential Scanning
Calorimetry (DSC)
Standard Test Method for Unreacted Toluene Diisocyanates inUrethane Prepolymers and Coating Solutions by
Gas Chromatography E1-1996R(1996)
Standard Test Method for Mechanical Cone Penetration Tests ofSoil
Standard Test Method for Chloride in Trichlorotrifluoroethane
(Withdrawn) Standard Test Method for Water Content ofTrichlorotrifluoroethane with Karl Fischer Reagent
*NOT CURRENT DOCUMENT
Standard Test Method for Purity of Halogenated Organic Solvents

Standard Practice for Rubber - Identification by Pyrolysis-GasChromatography R(1998)

Standard Specification for Asphalt Shingles Made from Glass Feltand Surfaced with Mineral Granules
Standard Test Method for Tension-Tension Fatigue of PolymerMatrix Composite Materials
Standard Test Method for Determining Electrolytic Corrosion ofCopper by Adhesives R(2000)
Standard Specification for Rubber Contraceptives (Male Condoms)
Standard Test Method for Hexane Extraction of Leather
Standard Test Methods for Structural Panels in Tension E1-1995R(1995)
Standard Test Method for In-Plane Shear Response of PolymerMatrix Composite Materials by Tensile Test of a
+/-45 Degree Laminate R(2001)
Standard Test Method for Matrix Solids Content of CompositePregreg
Standard Test Method for Volatiles Content of Composite MaterialPrepreg
Standard Test Method for Resin Flow of Carbon Fiber- EpoxyPrepreg
Standard Test Method for Gel Time of Carbon Fiber- Epoxy Prepreg
Standard Test Method for Alcohol Content and Purity of AcetateEsters by Gas Chromatography
Standard Practice for Laboratory Preparation of Soil- LimeMixtures Using a Mechanical Mixer E1-1997
R(1996)
Test Method for Tensile Properties of Fiber-Reinforced MetalMatrix Composites E1-2000
Standard Test Methods for Lead in Water
Standard Practice for Determining Dimensions of"Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin)
Pipe andFittings
Standard Test Methods for Flexible Cellular Materials - Slab,Bonded, and Molded Urethane Foams
Standard Specification for Polychlorotrifluoroethylene (PCTFE)Extruded Plastic Sheet and Film
Standard Practice for Accelerated Aging of Pressure- SensitiveTapes R(1998)
Standard Practice for Sampling and Analysis of New Built-Up RoofMembranes E1-1994 R(1994)
Standard Test Method for Testing Antifouling Panels in ShallowSubmergence R(1998)
Standard Test Method for Low Concentrations of Mercury in Paintby Atomic Absorption Spectroscopy R(1999)
Standard Test Method for Trace Chloride Ion in Engine Coolants
Standard Specification for Insect Screening and Louver ClothWoven from Vinyl-Coated Glass Yarns
Standard Performance Specification for Woven, Lace, and KnitHousehold Curtain and Drapery Fabrics
Standard Test Method for Hydrogen Content of Aviation TurbineFuels by Low Resolution Nuclear Magnetic
Resonance Spectrometry IP Designation:338/98
Standard Test Method for Peroxide Number of Aviation TurbineFuels
Standard Practice for Quality Assurance of Pressure- SensitiveTapes
Standard Test Method for Low Concentrations of Chromium in Paintby Atomic Absorption Spectroscopy
R(1999)
Standard Test Method for Semiquantitative Determination of FishOil in Drying Oils and Drying Oil Fatty Acids
by Gas-Liquid ChromatographyR(1998)

Standard Practice for Reporting Cure Times of Ultraviolet-CuredCoatings R(2001)

Standard Specification for High-Flash Aromatic Naphthas
Standard Specification for Rubber-Coated Cloth Hospital SheetingR(2000)
Standard Test Method for Tensile Strength and Elongation ofPressure-Sensitive Tapes E1-1997
Standard Test Method for Total Fluorine in Coal by the OxygenBomb Combustion/Ion Selective Electrode
Method
Standard Specification for Rubber Finger Cots
Standard Test Methods for Length of Woven Fabric E1- 1996R(1996)
Standard Test Methods for Width of Textile Fabric
Standard Test Method for Fabric Count of Woven Fabric
(Withdrawn) Standard Test Method for Hydraulic Bursting Strengthof Knitted Goods and Nonwoven Fabrics Diaphragm Bursting Strength TesterMethod
(Withdrawn) Standard Test Method for Bursting Strength ofKnitted Goods - Constant-Rate-Of-Traverse (CRT)
Ball Burst Test
Standard Test Method for Water Content of Coatings by DirectInjection into a Gas Chromatograph
Standard Test Method for Density of High-Modulus Fibers
Standard Test Method for Unwind Force of Pressure- SensitiveTapes R(2001)
Standard Test Method for Water Penetration Rate ofPressure-Sensitive Tapes R(2001)
Standard Test Method for Water Vapor Transmission ofPressure-Sensitive Tapes R(2001)
Standard Practice for Underground Installation of"Fiberglass" (Glass-Fiber-Reinforced Thermosetting- Resin)
Pipe
Standard Test Method for in-Plane Shear Strength of ReinforcedPlastics
Standard Specification for Tolerances for Knitted Fabrics
Standard Test Method for Adherence to Linerboard ofPressure-Sensitive Tape at Low Temperature R(2001)
Standard Practice for Packaging/Packing of Plastics R(1998)
(Withdrawn) Standard Specification for Toilet Tissue forIndustrial and Institutional Use Should Be Used
Instead of MIL-P-43988, WhichWas Cancelled on August 6, 1999
Standard Practices for Design, Testing, and Construction ofSlurry Seal
Standard Test Method for Tensile Properties of PultrudedGlass-Fiber-Reinforced Plastic Rod
Standard Specification for Polycarbonate (PC) Unfilled andReinforced Material
Standard Test Method for Flash Point by the Equilibrium Methodwith a Closed-Cup Apparatus E1-1996
R(1996)
Standard Test Method for Determining Water SeparationCharacteristics of Aviation Turbine Fuels by Portable
Separometer
Standard Specification for Strapping, Nonmetallic (and JoiningMethods)
Standard Specification for Strapping, Flat Steel and Seals
Standard Classification System for Specifying Plastic Materials
Standard Test Methods for Rubber - Determination of MetalContent by Flame Atomic Absorption (AAS)
Analysis R(1998)

Standard Test Method for Water in Crude Oil by Distillation APIDesignation: Chapter 10.2 (MPMS); IP
Designation: 358/97; E1-2000 R(2000)
Standard Test Methods for Properties of Continuous FilamentCarbon and Graphite Fiber Tows
Standard Test Method for Moisture in Plastics by CoulometricRegeneration of Phosphorus Pentoxide
Standard Specification for Coal Tar Roof Cement, AsbestosContaining E1 R(2000)
Standard Test Method for Phosphorus in Lubricating Oils andAdditives by Quinoline Phosphomolybdate
Method
Standard Test Method for Detection of Copper Corrosion fromLubricating Grease
Standard Test Method for Density and Relative Density of Liquidsby Digital Density Meter IP Designation:
365/84(86)
Standard Practice for Manual Sampling of Petroleum and PetroleumProducts IP Designation: IMPMS (Chapter
8.1) R(2000)
Standard Test Method for Abrasion Resistance of Organic Coatingsby the Taber Abraser
Standard Practice for Determining and Reporting DynamicMechanical Properties of Plastics
Standard Classification System for Nylon Injection and ExtrusionMaterials (PA)
Standard Specification for Reinforced and Filled PolyphenyleneSulfide (PPS) Injection Molding and Extrusion
Materials
Standard Test Methods for Compounding Materials - Flame AtomicAbsorption Technique - Determination of
Metals R(1997)
Standard Practice for Description of Frozen Soils (Visual-ManualProcedure) E2-1999 R(1994)
Standard Terminology Relating to Dynamic Mechanical Measurementson Plastics
(Discontinued) Standard Specification for Poly(Vinyl Chloride)(PVC) Prime Windows/Sliding Glass Doors
Standard Specification for Polypropylene Injection and ExtrusionMaterials
Standard Test Method for Thermal Oxidative Resistance of CarbonFibers R(1999)
Standard Specification for Vapor-Degreasing Grade and GeneralSolvent Grade 1,1,1-Trichloroethane
(Withdrawn) Standard Test Method for Abrasion Resistance ofTextile Fabrics (Oscillatory Cylinder Method)
Standard Practice for Performance Testing of Shipping Containersand Systems E1-2000
Standard Test Method for Wear Preventive Characteristics ofLubricating Fluid (Four-Ball Method) R(1999)
Standard Terminology Relating to Petroleum, Petroleum Products,and Lubricants E1: 2000
Standard Practice for Automatic Sampling of Petroleum andPetroleum Products IP Designation: MPMS
Chapter 8.2 R(2000)
Standard Classification for Acetal (POM) Molding and ExtrusionMaterials
Standard Specification for Styrene-Acrylonitrile (SAN) Injectionand Extrusion Materials
Standard Test Methods for Evaluating the Degree of Chalking ofExterior Paint Films
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) andRelated PVC and Chlorinated Poly(Vinyl
Chloride) (CPVC) Building ProductsCompounds
Standard Specification for Styrene-Butadiene Sheeting
Standard Test Methods for Sulfur in the Analysis Sample of Coaland Coke Using High-Temperature Tube
Furnace Combustion Methods
Standard Test Methods for Maximum Index Density and Unit Weightof Soils Using a Vibratory Table
Standard Test Methods for Minimum Index Density and Unit Weightof Soils and Calculation of Relative
Density

Standard Guide for Testing Inplane Shear Properties of CompositeLaminates E1-1994 R(1994)
Standard Test Method for Indicating Moisture in Concrete by thePlastic Sheet Method R(1999)
Standard Test Methods for Testing Fiber Ropes
Standard Test Method for Elastomer Compatibility of LubricatingGreases and Fluids
Standard Test Method for Sulfur in Petroleum Products byEnergy-Dispersive X-Ray Fluorescence
Spectrometry
Standard Test Methods for Ability of Adhesive Films to Supportor Resist the Growth of Fungi
Standard Specification for Polyvinyl Acetate-Based EmulsionAdhesives
Standard Test Methods for Liquid Limit, Plastic Limit, andPlasticity Index of Soils
Standard Test Methods for Nonmetallic Semi-Conducting andElectrically Insulating Rubber Tapes
Standard Test Method for Flexibility Determination of SupportedAdhesive Films by Mandrel Bend
Standard Test Method for Deterioration of Geotextiles fromExposure to Ultraviolet Light and Water (XenonArc Type Apparatus)
Standard Test Method for Water in Crude Oils by PotentiometricKarl Fischer Titration API Designation: MPMS
Chapter 10.7; IP Designation:356/93
Standard Test Method for Viscosity Determinations of UnfilledAsphalts Using the Brookfield Thermosel
Apparatus E1-2000 R(2000)
Standard Test Methods for Field Measurement of Surface Profileof Blast Cleaned Steel R(1999)
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
Standard Test Methods for Direct Moisture Content Measurement ofWood and Wood-Base Materials
Supersedes D2016 Along with D4444; E1-1997R(1997)
Standard Test Methods for Use and Calibration of Hand- HeldMoisture Meters E1-1998 R(1998)
Standard Practice for Measuring the Cure Behavior ofThermosetting Resins Using Dynamic Mechanical
Procedures
Standard Specification for Asphalt Roof Coatings - Asbestos-Free
Standard Test Method for Determining Grit, Lumps, or UndissolvedMatter in Water-Borne Adhesives
(Discontinued) Standard Specification for ThermoplasticPolyester (TPES) Materials Replaced by D5927
Standard Test Method for Determination of Carbon Residue (MicroMethod)
Standard Specification for n-Butyl Acetate (All Grades) R(2001)
Standard Specification for Phenolic Compounds (PF)
Standard Test Method for Measuring Apparent Viscosity byCapillary Viscometer at High-Temperature and
High- Shear Rates R(1998)
Standard Test Method for Analysis of Barium, Calcium, Magnesium,and Zinc in Unused Lubricating Oils by
Atomic Absorption Spectrometry
Standard Test Method for Trace Nitrogen in Liquid PetroleumHydrocarbons by Syringe/Inlet Oxidative
Combustion and ChemiluminescenceDetection IP Designation: 379/88
Standard Test Method for Grab Breaking Load and Elongation ofGeotextiles R(1996)
Standard Specification for Styrene-Maleic Anhydride Materials(S/MA)
Standard Test Method for Corrosiveness and Oxidation Stabilityof Hydraulic Oils, Aircraft Turbine Engine
Lubricants, and Other HighlyRefined Oils
Standard Specification for EPDM Sheet Used in Single- Ply RoofMembrane

Standard Test Method for Determination of Water (Moisture)Content of Soil by the Microwave Oven Method
Standard Test Method for Total Chlorides in Leather R(1998)
Standard Test Methods for Sulfates in Leather (Total, Neutral,and Combined Acid)
Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and
Extrusion Materials
Standard Guide for Selection and Use of Flat Strapping Materials
Standard Test Method for Measuring Viscosity at High Shear Rateand High Temperature by Tapered Bearing
Simulator
Standard Test Method for Determination of Yield Stress andApparent Viscosity of Engine Oils at Low
Temperature E1-2000
Standard Specification for Urea-Formaldehyde Resin Adhesives
Standard Specification for Technical Grade Methylene Chloride
Standard Test Method for Tearing Strength, Tongue Tear ofLeather
Standard Test Method for Stitch Tear Strength of Leather, DoubleHole
Standard Specification for Corrugated and Solid Fiberboard SheetStock (Container Grade) and Cut Shapes
Standard Test Method for Calculated Cetane Index by FourVariable Equation IP Designation: 380/94
Standard Specification for Filled Compounds ofPolytetrafluoroethylene (PTFE) Molding and Extrusion
Materials
Standard Test Method for Performing the Sieve Analysis of Coaland Designating Coal Size Replaces ASTM
D310- 88, D311-84, D410-84, D431-84;E1-1994 R(1994)
Standard Test Method for Determining Apparent Opening Size of aGeotextile
Standard Test Methods for Resistance of Adhesive Preparations inContainer to Attack by Bacteria, Yeast, and
Fungi
Standard Test Method for Flat Particles, Elongated Particles, orFlat and Elongated Particles in Coarse
Aggregate
Standard Specification for Poly(Methyl Methacrylate) AcrylicPlastic Sheet
Standard Test Method for Sediment in Crude Oil by MembraneFiltration API Designation: MPMS (Chapter
10.8) R(1999)
Standard Test Methods for Hydrogen Content of Light Distillates,Middle Distillates, Gas Oils, and Residua by
Low-Resolution Nuclear MagneticResonance Spectroscopy
Standard Specification for Automotive Spark-Ignition Engine Fuel
Standard Test Method for Determination of MTBE, ETBE, TAME,DIPE, tertiary-Amyl Alcohol and C1 to C4
Alcohols in Gasoline by GasChromatography
Standard Test Method for Index Puncture Resistance ofGeotextiles, Geomembranes, and Related Products
Standard Test Method for Determination of the Ability ofLubricants to Minimize Ring Sticking and Piston
Deposits in Two-Stroke-CycleGasoline Engines Other Than Outb
Standard Test Method for Determination of the Tendency ofLubricants to Promote Preignition in Two-StrokeCycle Gasoline Engines
Standard Specification for Lubricants for Two-Stroke- CycleSpark-Ignition Gasoline Engines-TC
Standard Test Method for Density of Solid Pitch (HeliumPycnometer Method) E1-1999 R(1999)

Standard Specification for Asphalt-Coated Glass-Fiber VentingBase Sheet Used in Roofing

Standard Test Method for Insoluble Contamination of HydraulicFluids by Gravimetric Analysis E1-2000
R(2000)
(Discontinued) Standard Test Method for Flexibility and Adhesionof Finish on Leather Discontinued 1997 and
Replaced by D6182; IHS Notified12/1998; *NOT CURRENT DOCU
Standard Test Methods for Elemental Analysis of Lubricant andAdditive Components - Barium, Calcium,
Phosphorus, Sulfur, and Zinc byWavelength-Dispersive X-Ray Fluor
Standard Test Methods for Water in Crude Oils by CoulometricKarl Fischer Titration API Designation: MPMS
Chapter 10.9; IP Designation:386/99
Standard Test Method for Determination of Additive Elements inLubricating Oils by Inductively Coupled
Plasma Atomic Emission Spectrometry
Standard Test Method for Qualitative Analysis for Active SulfurSpecies in Fuels and Solvents (Doctor Test)
Standard Specification for Low Silicate Ethylene Glycol BaseEngine Coolant for Heavy Duty Engines
Requiring a Pre-Charge of SupplementalCoolant Additive (SCA)
Standard Test Method for Measurement of Fuel System IcingInhibitors (Ether Type) in Aviation Fuels
Standard Test Method for Breaking Strength and Elongation ofTextile Fabrics (Grab Test)
Standard Test Method for Breaking Force and Elongation ofTextile Fabrics (Strip Method)
Standard Test Methods for Ash Content of Adhesives E1- 1997R(1997)
Standard Test Method for Permeability of Leather to Water Vapor
Standard Test Method for Colorfastness of Crocking of Leather
Standard Test Methods for Lead in Gasoline by X-Ray SpectroscopyIP Designation: 228/79; FSC 9130; Should
Be Used Instead of ASTM-D3229, WhichWas Cancelled on August
Standard Practice for Performing Accelerated Outdoor Weatheringof Pressure-Sensitive Tapes Using
Concentrated Natural Sunlight R(1999)
Standard Test Method for Detection of Holes in Medical Gloves
Standard Test Method for Determination of Additive Elements,Wear Metals, and Contaminants in Used
Lubricating Oils and Determination ofSelected Elements in Base Oil
Standard Test Method for Vapor Pressure of Petroleum Products(Mini Method)
Standard Classification System for Polyamide-Imide (PAI) Moldingand Extrusion Materials
Standard Classification System for Polyetherimide (PEI)Materials
Standard Specification for Polymeric Resin Film for ElectricalInsulation and Dielectric Applications
Standard Test Method for Moisture Absorption Properties andEquilibrium Conditioning of Polymer Matrix
Composite Materials E1 R(1998)
Standard Test Method for Measurement of Resin Content and OtherRelated Properties of Polymer Matrix
Thermoset Prepreg by Combined Mechanicaland Ultrasonic Methods
Standard Test Method for Assessing Distillate Fuel StorageStability by Oxygen Overpressure
Standard Specification for Cast Poly(Methyl Methacrylate)Plastic Rods, Tubes, and Shapes
Standard Practice for Pictorial Markings for Handling of Goods
Standard Test Method for Particulate Contamination in AviationFuels by Laboratory Filtration IP Designation:
423/97
Standard Specification for Pressure-Sensitive Tape forPackaging, Box Closure, and Sealing E1-2000

Standard Specification for Halon 1301, Bromotrifluoromethane(CF3Br) Replaces ES24-93

Standard Specification for Emulsified Refined Coal Tar (MineralColloid Type)
Standard Specification for Molding Compounds, ThermosettingE1-1996
Standard Test Method for Determination of Resistance of Leatherto Bleeding
Standard Test Method for Determination of Magnesium Sulfate(Epsom Salt) in Leather
Standard Practice for Calculation of (Non-Mineral) CombinedTanning Agents and Degree of Tannage
Standard Test Method for Shrinkage Temperature of Leather
Standard Specification for Stop-Leak Additive for EngineCoolants Used in Light Duty Service Should Be Used
Instead of MIL-C-51047B,which Was Cancelled on 11 Septemb
Standard Test Method for Tackiness of Finish on Leather
Standard Practice for Quality of Wood Members of Containers andPallets E1-1999
Standard Practice for Preparation of Metallographic Specimens
Standard Terminology Relating to Methods of Mechanical TestingE1-2000
Standard Terminology Relating to Metallography
Standard Test Methods for Rockwell Hardness and RockwellSuperficial Hardness of Metallic Materials
Standard Test Methods for Elevated Temperature Tension Tests ofMetallic Materials R(1998)
Standard Test Methods for Notched Bar Impact Testing of MetallicMaterials
Standard Test Methods for Softening Point of Resins Derived fromNaval Stores by Ring-and-Ball Apparatus
Standard Practice for Using Significant Digits in Test Data toDetermine Conformance with Specifications
R(1999)
(Withdrawn) Standard Test Methods for Chemical Analysis ofSteel, Cast Iron, Open-Hearth Iron, and Wrought
Iron
Standard Test Methods for Chemical Analysis of Aluminum andAluminum-Base Alloys R(1998)
Standard Test Methods for Determining the Inclusion Content ofSteel E1-1998; E2-1999
Standard Test Method for Determination of Copper in UnalloyedCopper by Gravimetry
(Withdrawn) Standard Practice for Sampling Steel and Iron forDetermination of Chemical Composition
Discontinued 1996; Replaced by E1806
Standard Test Methods for Chemical Analysis of Copper and CopperAlloys (Photometric Methods) R(1996)
Standard Test Method for pH of Aqueous Solutions with the GlassElectrode
Standard Test Methods for Chemical Analysis of Copper- Nickeland Copper-Nickel-Zinc Alloys R(1996)
Standard Test Method for Inspection and Verification ofThermometers
Standard Test Method for Surface Burning Characteristics ofBuilding Materials
Standard Practice for Sampling Nonferrous Metals and Alloys inCast Form for Determination of Chemical
Composition R(1996)
Standard Test Method for Laboratory Measurement of AirborneSound Transmission Loss of Building Partitions
and Elements
Standard Test Methods for Water Vapor Transmission of Materials
(Withdrawn) Standard Test Methods for Directional ReflectanceFactor, 45-Deg 0-Deg, of Opaque Specimens
by Broad-Band Filter Feflectometry*NOT CURRENT DOCUMENT R(198
Standard Specification for ASTM Hydrometers
Standard Test Method for Rapid Indentation Hardness Testing ofMetallic Materials E1-1996 R(1996)
Standard Test Methods for Fire Tests of Roof Coverings

Standard Test Method for Indentation Hardness of MetallicMaterials by Portable Hardness Testers E1- 1998;
E2-1999 R(1997)
Standard Practice for Ultrasonic Pulse-Echo Straight- BeamExamination by the Contact Method R(2001)
Standard Test Methods for Fire Tests of Building Constructionand Materials
Standard Test Methods for Chemical Analysis of Titanium andTitanium Alloys
Standard Practice for Fabricating and Checking Aluminum AlloyUltrasonic Standard Reference Blocks
Standard Test Method for Poisson's Ratio at Room Temperature
Standard Test Method for Behavior of Materials in a VerticalTube Furnace at 750 Degrees C E1-2000
Standard Test Methods for Conducting Creep, Creep- Rupture, andStress-Rupture Tests of Metallic Materials
(Discontinued) Standard Method for Controlling Quality ofRadiographic Testing Replaced by E94
Standard Specification for Gravity-Convection andForced-Ventilation Ovens E1-1995
(Discontinued) Standard Methods of Fire Tests of Door AssembliesE1-1984; E2-1993; Discontinued 1995;
Replaced by E2074
Standard Test Method for Surface Flammability of Materials Usinga Radiant Heat Energy Source E1-2001
Standard Practice for Goniophotometry of Objects and Materials
Standard Practices for General Techniques of InfraredQuantitative Analysis
Standard Specification for Standard Atmospheres for Conditioningand Testing Flexible Barrier Materials
R(1998)
Standard Terminology of Microscopy E1-2000 R(1999)
Standard Practice for Use of the Terms Precision and Bias inASTM Test Methods R(1996)
Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in.(51 to 114-mm)) Steel Castings
Standard Specification for Apparatus for Microdetermination ofCarbon and Hydrogen in Organic and OrganoMetallic Compounds E1-2000 R(1999)
Standard Specification for Laboratory Glass Micropipets R(1999)
Standard Test Methods for Analysis of Ethylene Glycols andPropylene Glycols
Standard Test Method for Water Using Volumetric Karl FischerTitration
Standard Practice for Immersed Ultrasonic Examination by theReflection Method Using Pulsed Longitudinal
Waves
Standard Test Method for Calibration of Thermocouples ByComparison Techniques E1-1996 R(1996)
Standard Test Methods for Analysis of Sulfuric Acid
Standard Test Methods for Analysis of Hydrochloric Acid
Standard Test Method for Optical Emission Spectrometric Analysisof Aluminum and Aluminum Alloys by the
Point-To-Plane Technique R(1996)
Standard Test Method for Linear Thermal Expansion of SolidMaterials with a Vitreous Silica Dilatometer
Standard Practice for Electromagnetic (Eddy-Current) Examinationof Copper and Copper-Alloy Tubes
Standard Test Method for Determination of Manganese in ManganeseOres by Pyrophosphate Complexed
Permanganate Potentiometric Titration
Standard Test Methods for Performance Characteristics ofMetallic Bonded Resistance Strain Gages R(1998)
Standard Test Method for Thickness of Thin Foil and Film byWeighing R(1999)
Standard Test Method for Chlorine in Organic Compounds by SodiumPeroxide Bomb Ignition

Standard Test Method for Sulfur in Organic Compounds by SodiumPeroxide Bomb Ignition
Standard Test Method for Measuring Fast-Neutron Reaction Ratesby Radioactivation of Iron
Standard Test Method for Measuring Fast-Neutron Reaction Ratesby Radioactivation of Nickel R(1996)
Standard Test Method for Measuring Reaction Rates andFast-Neutron Fluences by Radioactivation of Sulfur-32
(Withdrawn) Standard Definitions of Terms Relating to LiquidPenetrant Inspection
Standard Practice for Ultrasonic Examination of LongitudinalWelded Pipe and Tubing
Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in.(114 to 305-mm)) Steel Castings
Standard Test Method for Determining Rate of Air Leakage ThroughExterior Windows, Curtain Walls, and
Doors Under Specified PressureDifferences Across the Specimen R
Standard Test Methods for Bend Testing of Material for Ductility
Standard Test Methods for Chemical Analysis of Caustic Soda andCaustic Potash (Sodium Hydroxide and
Potassium Hydroxide)
(Withdrawn) Standard Practice for Sampling Industrial ChemicalsR(1996)
Standard Practice for Computing the Colors of Objects by Usingthe CIE System
Standard Practice for Eddy-Current Examination of Steel TubularProducts Using Magnetic Saturation
Standard Reference Radiographs for Tin Bronze Castings
(Withdrawn) Standard Test Method for Relative Initial and FinalMelting Points and the Melting Range of
Organic Chemicals
Standard Test Method for Structural Performance of ExteriorWindows, Curtain Walls, and Doors by Uniform
Static Air Pressure DifferenceE1-1998
Standard Test Method for Hydroxyl Groups by PyromelliticDianhydride Esterification
Standard Test Method for Measurement of Airborne SoundInsulation in Buildings
Standard Test Method of Sharp-Notch Tension Testing ofHigh-Strength Sheet Materials R(1997)
Standard Test Method for Macroetching Metals and Alloys
Standard Test Methods of Tension Testing of Metallic Foil R(1998)
Standard Test Method for Phosphorus in Organic Compounds bySodium Peroxide Bomb Ignition
(Withdrawn) Standard Test Methods for Analysis of PhosphoricAcid
Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
Standard Practice for Measuring Coating Thickness byMagnetic-Field or Eddy-Current (Electromagnetic) Test
Methods
Standard Test Method for Microindentation Hardness of Materials
Standard Reference Radiographs for Steel Fusion Welds
Standard Test Method for Plane-Strain Fracture Toughness ofMetallic Materials R(1997)
Standard Practice for Microetching Metals and Alloys
Classification for Rating Sound Insulation R(1999)
Standard Test Methods for Solar Energy Transmittance andReflectance (Terrestrial) of Sheet Materials E11993 R(1993)
Standard Practice for Fabrication and Control of Steel ReferenceBlocks Used in Ultrasonic Examination
(Withdrawn) Standard Specification for Industrial Wire Cloth andScreens (Square Opening Series) Replaced by
E2016: 1999 R(1997)
(Withdrawn) Standard Test Method for Sulfur in Organic Compoundsby Oxygen Flask Combustion

(Discontinued) Standard Test Methods for Compressive Strength ofLaboratory Constructed Masonry Prisms
Replaced by C1388
Standard Test Methods for Analysis of Calcium Chloride
Standard Terminology Relating to Quality and Statistics
Standard Test Method for Heat of Ablation E1-1996 R(1996)
(Discontinued) Standard Test Method for Odor and Taste Transferfrom Packaging Film R(1995)
Standard Test Methods for Chemical Analysis of Copper AlloysR(1996)
Standard Test Methods for Strength of Anchors in Concrete andMasonry Elements
Standard Test Methods for Leaks Using the Mass Spectrometer LeakDetector in the Inside-Out Testing Mode
Standard Test Methods for Leaks Using the Mass Spectrometer LeakDetector in the Detector Probe Mode
R(2000)
Standard Test Methods for Flexural Bond Strength of Masonry
Standard Practice for Agencies Performing Nondestructive Testing
Standard Test Method for Determining Image Quality in DirectThermal Neutron Radiographic Examination
Standard Test Method for Frost Point of Sealed Insulating GlassUnits E1-1999 R(1999)
Standard Guide for the Installation Operable Partitions
Standard Practice for Flux Leakage Examination of FerromagneticSteel Tubular Products
Standard Guide for Dimensional Coordination of RectilinearBuilding Parts and Systems R(1999)
Standard Practice for Application of Ceiling Suspension Systemsfor Acoustical Tile and Lay-In Panels in Areas
Requiring Seismic Restraint
Standard Test Method for Total Mass Loss and Collected VolatileCondensable Materials from Outgassing in a
Vacuum Environment R(1999)
Standard Test Method for Laboratory Measurement of NoiseReduction of Sound-Isolating Enclosures
Standard Test Method for Sharp-Notch Tension Testing withCylindrical Specimens R(1997)
Standard Test Method for Dynamic Tear Testing of MetallicMaterials R(1994)
Standard Test Method for Optical Emission Spectrometric Analysisof Aluminum and Aluminum Alloys by the
Point-To-Plane Technique, NitrogenAtmosphere R(1996)
Standard Practice for Evaluating Foreign Odors in PaperPackaging R(1995)
Standard Practice for Use of Metric (SI) Units in BuildingDesign and Construction (Committee E-6
Supplement to E380) E1-1999 R(1999)
Standard Test Method for Specific Optical Density of SmokeGenerated by Solid Materials
Standard Practice for Calculating Absorbed Dose from Gamma or XRadiation
Standard Specification for Mercury-In-Glass, MaximumSelf-Registering, Clinical Thermometers
Standard Specification for Maximum Permissible Thermal ResidualStress in Annealed Glass Laboratory
Apparatus
Standard Specification for Disposable Glass Micropipets E1-1996R(1996)
Standard Specification for Interchangeable Taper- GroundStopcocks and Stoppers R(1998)
Standard Practice for Conducting an Interlaboratory Study toDetermine the Precision of a Test Method
Standard Specification for Laboratory Glass Volumetric Apparatus
Standard Guide for Selection of Scales for Metric BuildingDrawings E1-1999 R(1999)

Standard Guide for Selection and Use of Neutron- ActivationFoils for Determining Neutron Spectra Employed
in Radiation-Hardness Testingof Electronics
Standard Guide for Determining Neutron Energy Spectra fromNeutron Sensors for Radiation-Hardness Testing
of Electronics
Standard Practice for Characterizing Neutron Energy FluenceSpectra in Terms of an Equivalent Monoenergetic
Neutron Fluence forRadiation-Hardness Testing of Electron
Standard Test Method for Cohesion/Adhesion of SprayedFire-Resistive Materials Applied to Structural
Members
(Withdrawn) Standard Practice for Installation of Storm Windows,Replacement Windows, Multi-Glazing,
Storm Doors, and Replacement Doors
Standard Test Method for Measuring Vibration-Damping Propertiesof Materials
Standard Specification for the Classification of the Durabilityof Sealed Insulating Glass Units
Standard Specification for Crucibles, Ignition, Laboratory,Metal E1-1997 R(1996)
Standard Specification for Disposable Glass Micro BloodCollection Pipets R(1996)
Standard Practices for Mounting Test Specimens During SoundAbsorption Tests
Standard Guide for Measurement of Gases Present or GeneratedDuring Fires
Standard Test Method for Crack Strength of Slow-Bend PrecrackedCharpy Specimens of High-Strength
Metallic Materials R(1997)
Standard Test Method for Fire Tests of Through- Penetration FireStops
Standard Practice for Determining Resistance of Solar CollectorCovers to Hail by Impact with Propelled Ice
Balls R(1996)
Standard Specification for Phase Change-Type Disposable FeverThermometer for Intermittent Determination of
Human Temperature
Standard Guide for Modular Coordination of Clay and ConcreteMasonary Units R(1999)
Standard Specification for Structural Film Adhesives forHoneycomb Sandwich Panels E1-2000
Standard Guide for Reflected-Light Photomicrography
Standard Test Methods for Estimating the Largest Grain Observedin a Metallographic Section (ALA Grain
Size)
Standard Specification for Serological Pipet, Disposable PlasticR(1998)
Standard Specification for Glass Volumetric (Transfer) PipetsR(1999)
Standard Practice for Detection and Evaluation ofDiscontinuities by the Immersed Pulse-Echo Ultrasonic
Method UsingLongitudinal Waves
Standard Classification for Acoustically Absorptive MaterialsApplied by Trowel or Spray E1-1997 R(1997)
Standard Test Methods for Estimating the Depth ofDecarburization of Steel Specimens E1-2001
Standard Specification for Pharmaceutical Glass Graduates
Standard Specification for Common Laboratory Glass Funnels
Standard Specification for Liquid Caustic Soda (Sodium HydroxideSolution) R(1997)
Standard Specification for Muriatic Acid (Technical GradeHydrochloric Acid)
Standard Specification for Sampling and Testing of Reusable LaboratoryGlassware R(1996)
Standard Test Method for Measurement of Surface Layer Thicknessby Radial Sectioning R(1998)
Standard Test Method for Thermal Conductivity of Solids by Meansof the Guarded-Comparative- Longitudinal
Heat Flow Technique
Standard Guide for Installing Bonded Resistance Strain GagesR(1998)

Standard Test Method for Optical Emission Spectrometric Analysisof Aluminum and Aluminum Alloys by the
Argon Atmosphere, Point-To-Plane,Unipolar Self- Initiating Ca
Standard Classification for Acoustical Ceiling Products
Standard Practice for Angle Resolved Optical ScatterMeasurements on Specular or Diffuse Surfaces
Standard Guide for Computed Tomography (CT) Imaging
Standard Specification for Caustic Potash; Solid (PotassiumHydroxide; Solid)
Standard Practice for Computed Tomographic (CT) Examination
Standard Guide for Including Government Procurement Requirementsin ASTM Documents R(1999)
Standard Practice for Radiographic Examination
Guide for Recommended Uses of Photoluminescent Safety MarkingsFSC 9390; Should Be Used Instead of
MIL-L- 3891B, Which Was Cancelled onOctober 16, 2000
Standard Test Method for Photopic Luminance of Photoluminescent(Phosphorescent) Markings FSC 9390;
Should Be Used Instead of MIL-L-3891B,Which Was Cancelled on Octo
Standard Test Method for Compressibility and Recovery of GasketMaterials
Standard Test Methods for Sealability of Gasket Materials
Standard Test Method for Rate of Grease Penetration of FlexibleBarrier Materials (Rapid Method) R(1998)
Standard Terminology Relating to Resilient Floor Coverings
Standard Test Method for Indentation of Resilient Floor Tiles(McBurney Test) E1-2000 R(2000)
Standard Test Method for Electrical Resistance of ConductiveResilient Flooring Reinstated
Standard Test Methods for Tension Testing of Nonmetallic GasketMaterials
(Discontinued) Standard Practice for Sampling Particulates fromMan-Accessible Storage Vessels for Aerospace
Fluids by Vacuum EntrainmentTechnique (General Method) R
Standard Test Method for Bird Impact Testing of AerospaceTransparent Enclosures R(1999)
Standard Test Method for Measuring Thickness of Resilient FloorCovering with Foam Layer
Standard Practice for Safe Handling of Solvent Cements, Primers,and Cleaners Used for Joining Thermoplastic
Pipe and Fittings R(1999)
Standard Specification for Corrugated Polyethylene (PE) Pipe andFittings
Standard Test Method for Wear Layer Thickness of Resilient FloorCoverings by Optical Measurement
Standard Terminology Relating to Plastic Piping Systems
Standard Specification for Hardened Steel Washers R(2000)
Standard Specification for Hardened Steel Washers (Metric)R(2000)
Standard Specification for Threaded Chlorinated Poly(VinylChloride) (CPVC) Plastic Pipe Fittings, Schedule
80
Standard Specification for Socket-Type Chlorinated Poly(VinylChloride) (CPVC) Plastic Pipe Fittings,
Schedule 40
Standard Specification for Chlorinated Poly (Vinyl Chloride)(CPVC) Plastic Pipe Fittings, Schedule 80
Standard Specification for Chlorinated Poly(Vinyl Chloride)(CPVC) Plastic Pipe, Schedules 40 and 80
Standard Specification for Chlorinated Poly(Vinyl Chloride)(CPVC) Plastic Pipe (SDR-PR)
Standard Practice for Nondestructive Pull Testing of Wire BondsR(2001)
Standard Test Methods for Measuring Pull Strength ofMicroelectronic Wire Bonds R(2001)
Standard Specification for Nonferrous Nuts for General Use

Standard Specification for Nonferrous Nuts for General Use(Metric)

Standard Specification for Nonferrous Bolts, Hex Cap Screws, andStuds for General Use
Standard Specification for Nonferrous Bolts, Hex Cap Screws, andStuds for General Use (Metric)
Standard Specification for Elastomeric Seals (Gaskets) forJoining Plastic Pipe
Standard Specification for Thermoplastic Well Casing Pipe andCouplings Made in Standard Dimension Ratios
(SDR), SCH 40 and SCH 80
Standard Test Method for Total Immersion Corrosion Test forAircraft Maintenance Chemicals
Standard Specification for Solvent Cements for ChlorinatedPoly(Vinyl Chloride) (CPVC) Plastic Pipe and
Fittings
Standard Test Method for Measuring Dose for Use in LinearAccelerator Pulsed Radiation Effects Tests
Standard Test Method for Size of Resilient Floor Tile by DialGage Method
Standard Specification for Alloy Steel Eyebolts
Standard Specification and Test Methods for Metallic MedicalBone Screws E1-2001
Standard Specification for Unalloyed Tantalum for SurgicalImplant Applications (UNS R05200, UNS R05400)
Standard Specification for Carbon and Alloy Steel ExternallyThreaded Metric Fasteners
Standard Specification for Carbon and Alloy Steel ExternallyThreaded Metric Fasteners
Standard Practice for Insertion of Flexible Polyethylene Pipeinto Existing Sewers R(2000)
Standard Specification for Stainless Steel Bolts, Hex CapScrews, and Studs
Standard Specification for Stainless Steel Nuts
Standard Test Methods for Determining the Mechanical Propertiesof Externally and Internally Threaded
Fasteners, Washers, and Rivets (Metric)
Standard Test Method for Adhesion of Gasket Materials to MetalSurfaces
Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L)Lube Oil Dispensing E1-1994 R(1994)
Standard Specification for Leather Protectors for RubberInsulating Gloves and Mittens
Standard Specification for Modular Gage Boards
Standard for Shipbuilders and Marine Paints and CoatingsProduct/Procedure Data Sheet
Standard Specification for Gage Piping Assemblies R(1998)
Standard Test Method for Sorbent Performance of Adsorbents
Standard Specification for Stainless Steel Metric Bolts, Screws,and Studs
Standard Specification for Smooth-Wall Poly (VinylChloride)(PVC) Plastic Underdrain Systems for Highway,
Airport, and SimilarDrainage R(2000)
Standard Specification for Wildcats, Ship Anchor Chain R(1998)
Standard Specification for Surface Discontinuities of Bolts,Screws, and Studs, Inch and Metric Series
Standard Test Method for Stress Crazing of Transparent Plastics
Standard Specification for Poly(Vinyl Chloride) (PVC) ProfileGravity Sewer Pipe and Fittings Based on
Controlled Inside Diameter
Standard Specification for Surface Discontinuities of Nuts, Inchand Metric Series

Standard Test Method for Specific Optical Density of SmokeGenerated by Solid Materials for Aerospace
Applications
Standard Specification for Alloy Steel Socket Button and FlatCountersunk Head Cap Screws
Standard Specification for Stainless Steel Metric Nuts
Standard Specification for Style 1 Stainless Steel Metric Nuts
Standard Specification for Thrusters, Tunnel, PermanentlyInstalled in Marine Vessels R(1998)
Standard Specification for Washers, Steel, Plain (Flat),Unhardened for General Use
Standard Practice for Mechanical Symbols, Shipboard - Heating,Ventilation, and Air Conditioning (HVAC)
Standard Specification for Hot Water Sanitizing CommercialDishwashing Machines, Single Tank, Conveyor
Rack Type
Standard Specification for Heat-Sanitizing CommercialDishwashing Machines, Multiple Tank, Conveyor Rack
Type
Standard Specification for Hot Water Sanitizing CommercialDishwashing Machines, Multiple Tank, Rackless
Conveyor Type
Standard Specification for Commercial Dishwashing Racks R(1998)
Standard Specification for Filter Units, Air Conditioning:Viscous-Impingement Type, Cleanable R(1990)
Standard Specification for Stainless Steel Socket Button andFlat Countersunk Head Cap Screws
Standard Specification for Stainless Steel Socket Button andFlat Countersunk Head Cap Screws (Metric)
Standard Specification for Stainless Steel Socket-Set Screws
Standard Specification for Stainless Steel Socket Set Screws(Metric)
Standard Test Method for Agar Diffusion Cell Culture Screeningfor Cytotoxicity E1-2001 R(2001)
Standard Specification for Stainless Steel Billet, Bar, and Wirefor Surgical Instruments
Standard Specification for Letters and Numerals for ShipsR(1998)
Standard Specification for Alloy Steel Socket Set Screws
Standard Specification for Alloy Steel Socket Set Screws(Metric)
Standard Specification for Commercial Food Waste DisposersR(1998)
Standard Specification for Noncarbonated MechanicallyRefrigerated, Beverage Dispenser (Visible Product)
Standard Specification for Minimum Performance and SafetyRequirements for Resuscitators Intended for Use
with Humans R(1999)
Standard Definitions of Terms Relating to Hemostatic ForcepsR(1996)
Standard Practice for Inspection of Marine Surface Preparationand Coating Application
Standard Specification for Mixing Machines, Food, Electric
Standard Specification for Gong, Sound Signaling R(1996)
Standard Specification for Compressible-Washer-Type DirectTension Indicators for Use with Structural
Fasteners [Metric]
Standard Specification for Medical and Surgical Suction and DrainageSystems R(2000)
Standard Specification for Rigid Laryngoscopes for TrachealIntubation - Hook-On Fittings for Laryngoscope
Handles and Blades with Lamps
Standard Specification for Feeders, Detergent, Rinse Agent, andSanitizing Agent for Commercial Dishwashing
and Glasswashing Machines

Standard Specification for Dispensers, Powdered Iced Tea

Standard Specification for General Workmanship and PerformanceMeasurements of Hemostatic Forceps
R(1996)
Standard Specification for Inserted and Noninserted SurgicalScissors R(1998)
Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated(Galvanized) Welded, for Fence Structures
Standard Specification for Non-Metallic Expansion Joints R(1998)
Standard Terminology Relating to Product Counterfeit ProtectionSystems
Standard Guide for the Measurement of Single Event Phenomena(SEP) Induced by Heavy Ion Irradiation of
Semiconductor Devices
Standard Specification for Cooker, Steam R(1997)
Standard Specification for Cuffed and Uncuffed Tracheal TubesE1-1997
Standard Specification for Metal, Expanded, Steel R(1997)
Standard Test Method for Performance of Griddles
Standard Specification for Brick, Insulating, High Temperature,Fire Clay R(1997)
Standard Practice for Use of SI (Metric) Units in MaritimeApplications (Committee F-25 Supplement to
IEEE/ASTM SI 10)
Standard Specification for Manually Operated Fueling Hose ReelsR(1996)
Standard Specification for Ovens, Microwave, Electric R(1999)
Standard Specification for Pressure-Reducing Valves for WaterSystems, Shipboard
Standard Guide for Selection of Security Technology forProtection Against Counterfeiting, Alteration,
Diversion, Duplication,Simulation, and Substitution (CADDSS) o
Standard Specification for Kettles, Steam-Jacketed, 20 to 200gal (75.7 to 757 L), Floor or Wall Mounted,
Direct Connected, Gas Fired andElectric Fired
Standard Specification for Solid Vinyl Floor Tile
Standard Guide for Performance of an Ice Rescuer - Level 11
Standard Specification for Automatic Shut-Off Valves (Also Knownas Excess Flow Valves, EFV) for Air or
Nitrogen Service
Standard Practice for Atmospheric Environmental Exposure Testingof Nonmetallic Materials
Standard Terminology Relating to Corrosion and Corrosion Testing
Standard Practice for Determining Resistance of SyntheticPolymeric Materials to Fungi
Standard Practice for Determining Resistance of Plastics to BacteriaR(1996)
(Withdrawn) Standard Practice for Operating Light- ExposureApparatus (Carbon-Arc Type) with and without
Water for Exposure ofNonmetallic Materials
(Withdrawn) Standard Practice for Operating Light- ExposureApparatus (Xenon-Arc Type) with and without
Water for Exposure of NonmetallicMaterials Replaced by G155:1
Standard Test Methods of Detecting Susceptibility toIntergranular Corrosion in Wrought, Nickel-Rich,
Chromium-Bearing Alloys
Standard Practice for Determining Algal Resistance of PlasticFilms
Standard Test Method for Exfoliation Corrosion Susceptibility in2XXX and 7XXX Series Aluminum Alloys
(EXCO Test)
Standard Test Method for Determining Susceptibility toStress-Corrosion Cracking of 2XXX and 7XXX
Aluminum Alloy Products
Standard Guide for Three Methods of Assessing Buried Steel Tanks

Standard for Use of the International System of Units (SI): theModern Metric System Revision and
Redesignation of ANSI/IEEE Std 268-1992 andASTM E380
(Active/Historical) NATO QualityAssurance Requirements for Software Development Edition 1 (03.93)
(SupersedesAQAP-13)
(Active/Historical) NATO Guidefor a Government Quality Assurance Programme Edition 1 (03.93)
(SupersedesAQAP-10)
TP-71b Solder Wicking (WaveSolder Technique) Test Procedure for Electrical Connectors and SocketsRevision
of EIA-364-71A; Errata July 13, 2001
Guideline on the Use andApplication of Cpk R(2001)
(Withdrawn) FOTP-170 Cable CutoffWavelength of Single- Mode Fiber by Transmitted Power
Diminishing Manufacturing Sourcesand Material Shortages (DMSMS) Management Practices
FOTP-46 Spectral AttenuationMeasurement for Long- Length, Graded-Index Optical Fibers Revision of EIA455-46
FOTP-51 Pulse DistortionMeasurement of Multimode Glass Optical Fiber Information TransmissionCapacity
Revision of EIA-455-51
FOTP-53 Attenuation by SubstitutionMeasurement for Multimode Graded-Index Optical Fibers or Fiber
AssembliesUsed in Long Length Communications Systems Revision of E
FOTP-173 Coating GeometryMeasurement for Optical Fiber Side-View Method
(Withdrawn) Test Procedure forAirborne Sound Measurements on Rotating Electric Machinery Correction 1973R(1986)
(Withdrawn) ReferenceDesignations for Electrical and Electronics Parts and Equipments ANSIY32.16-75;
Replaces CSA Z99.2-77 (ANSI/IEEE) R(1988)
(Withdrawn) Standard Definitionsof Terms Relating to Fiber Optics
(Withdrawn) General Requirementsfor Synchronous Machines (ANSI/IEEE)
(Withdrawn) Printed BoardDrawings in Digital Form R(1993)
(Withdrawn) Electronic DesignData Description for Printed Boards in Digital Form
Requirements for Electronic GradeSolder Alloys and Fluxed and Non-Fluxed Solid Solders for
ElectronicSoldering Applications
Fluorescent Lamps - Rapid-StartTypes - Dimensional and Electrical Characteristics Includes
SupplementsC78.1a-1992; C78.1c-1994; C78.1d-1995; C78.1e-1996: Replaces P
Fluorescent Lamps - Preheat-StartTypes - Dimensional and Electrical Characteristics Includes
SupplementsC78.2a-1991; C78.2b-1992; C78.2c-1993; C78.d-1994; C78.2e-19
Electrical Lamp Bases IncludesSupplements C81.61a- 1993; C81.61b-1994; C81.61c-1995; C81.61d1995;C81.61e-1996; C81.61f-1996; C81.61g-1996; C81.61h- 1996; C81.61j-1
Industrial Control and SystemsEnclosures R(2001)
(Withdrawn) Initial Attack FireApparatus; Tentative Interim Amendment - 1991 Incorporated into NFPA 1901
(Withdrawn) Mobile Water SupplyFire Apparatus; Tentative Interim Amendment - 1991 Incorporated into
NFPA1901
(Withdrawn) Aerial Ladder andElevating Platform Fire Apparatus; Errata - 1991, Tentative Interim
Amendment- 1991 Incorporated into NFPA 1901
Scientific and Technical Reports - Elements, Organization, andDesign

(Withdrawn) Descriptive Details for Food Service EquipmentStandards

(Cancelled) Standard Words for Test Paragraphs for Tube Fittingsand Tube Assemblies R(1991)
Deicing/Anti-Icing Fluid, Aircraft, SAE Type I
(Cancelled) Compound, Carbon Removing, Orthodichlorobenzene forEngine Parts
Steel Cleanliness, Premium Aircraft-Quality Magnetic ParticleInspection Procedure
Thread Compound, Anti-Seize, Graphite-Petrolatum
(Cancelled) Magnetic Particle Inspection (Cancelled April 1996,Superseded by ASTM E1444) R(1992)
Inspection Material, Penetrant Should Be Used Instead ofMIL-I-25135, Which Was Cancelled on 13 March
1998
(Noncurrent) Coating Material, Silicone Resin 205 Degrees C (400Degrees F) Cure
(Noncurrent) Silicone Rubber Extreme Low-Temperature Resistant45 - 55 Reaffirmed Noncurrent April 2001
R(1994)
(Noncurrent) Magnesium Alloy, Sheet and Plate 2.0Th - 0.78MnSolution Heat Treated, Cold Worked, and
Precipitation Heat Treated UNS M13210
(Noncurrent) Tin Bronze Castings Sand and Centrifugal 87.5Cu -10Sn - 2Zn as Cast
(Noncurrent) Titanium Alloy, Sheet and Strip 8Mn Annealed, 110ksi (758 MPa) Yield Strength UNS R56080
Steel Tubing, Seamless 0.15 Carbon, Maximum Annealed UNS G10100
Steel Tubing, Welded 0.13 Carbon, Maximum Annealed UNS G10100
(Noncurrent) Wire, Carbon Steel 0.60 - 0.75C Hardened andTempered
(Noncurrent) Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo(0.28 - 0.36C) (SAE 4330 Modified)
Annealed UNS J23260
Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni -0.28Cb - 3.2Cu Homogenization and Solution
Heat Treated or Homogenization,Solution, and Precipitation
Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni -0.22Cb - 2.8Cu Solution and Precipitation Heat
Treated (H1100) 130 ksi (896MPa) Tensile Strength UNS J
Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni -0.22Cb - 2.8Cu Solution Heat Treated,
Precipitation Hardenable UNS J92110
Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1AlCold-Drawn, Precipitation-Hardenable UNS S17700

(Noncurrent) Alloy Welding Wire, Corrosion and Heat Resistant75Ni - 15.5Cr - 8.0Fe
Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, andRings 44Fe - 18.5Cr - 35.5Ni - 1.1Si Solution Heat
Treated UNS N08330
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings,Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti 0.006B - 0.30V ConsumableElectrode Melted 1800 Degrees F
(Noncurrent) Welding Electrodes, Covered, Corrosion and HeatResistant Steel 16.5Cr - 4.5Ni - 2.9Mo - 0.10N
UNS W35010
Steel, Corrosion and Heat Resistant, Flat Wire 15Cr - 25.5Ni -1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 Degrees F
(982 Degrees C) SolutionTreated, Cold Drawn or Cold Roll
Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni -2.3Mo - 1.1Al Vacuum Melted UNS S13889
Nickel, Corrosion and Heat Resistant, Sheet and Strip ThoriaDispersion Strengthened 2.2Th02 UNS N03260
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, andRings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al
Consumable Electrode or VacuumInduction Melted Annealed UN
Nickel Alloy, Corrosion and Heat Resistant, Plate 54Ni - 22Cr -12.5Co - 9.0Mo - 1.2Al Annealed UNS N06617
Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni- 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable
Electrode or Vacuum InductionMelted Annealed UNS N06617
Nickel, Corrosion and Heat Resistant, Bars, Forgings, andExtrusions Thoria Dispersion Strengthened 2.2ThO2
Stress-Relieved UNS N03260
Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo- 0.08V (0.40 - 0.44C) Consumable Electrode
Vacuum Remelted Normalized andTempered
Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.13- 0.18C) (SAE 8615) UNS G86150
Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.15 -0.20C) (SAE 4617) UNS G46170
Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.17 -0.22C) (SAE 4620) UNS G46200
Steel, Bars and Forgings 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C)(4337) UNS G43370
(Noncurrent) Steel Bars and Forgings 0.50Cr (0.98 - 1.10C) (SAE50100) for Bearing Applications UNS
G50986
Steel, Sheet, Strip, and Plate 0.95Cr - 0.22V (0.48 - 0.53C)(SAE 6150) UNS G61500
(Noncurrent) Steel Bars and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38- 0.43C)
(Noncurrent) Steel Sheet, Strip, and Plate 1.0Cr - 7.5Ni - 4.5Co- 1.0Mo - 0.09V (0.29 - 0.34C) Consumable
Electrode Vacuum Melted, Annealed(UNS K91313)
(Cancelled) Rings, Sealing, Phosphonitrilic (FX) FluoroelastomerHigh-Temperature-Fluid Resistant 65-75
(Cancelled) Rings, Sealing, Phosphonitrilic (FX) FluoroelastomerHigh-Temperature-Fluid Resistant 75-85

(Cancelled) Rings, Sealing, Phosphonitrilic (FZ) FluoroelastomerHigh- Temperature-Fluid Resistant

(Cancelled) Rings, Sealing, Ethylene Propylene (EPM) RubberPhosphate Ester Hydraulic Fluid Resistant 75 85
(Noncurrent) Balls, Low-Chromium, High-Carbon Steel Hardened andTempered
Coating, Corrosion Preventative, Polyurethane for AircraftIntegral Fuel Tanks for Use to 250 Degrees F (121
Degrees C) FSC 8030
(R) Fitting, Tee, Standard and Reducer, Bulkhead and InternalPort on Run, Flareless FSC 4730
(Noncurrent) Sealing Compound, Polysulfide, AcceleratorRequired, for Aircraft Structures FSC 8030; Should
Be Used Instead ofMIL-S-7124B, Which Was Cancelled on 27 S
Sealing Compound, Polysulfide Type, Low Temperature Curing,Quick Repair, Integral Fuel Tanks and Fuel
Cell Cavities Should be usedinstead of MIL-S-83318, which was
(R) Fitting, Tee, Standard and Reducer, Bulkhead on Run,Flareless FSC 4730
(R) Fitting, Elbow, 90 Degree, Standard and Reducer, FlarelessFSC 4730
(R) Fitting, Tee, Standard and Reducer, Flareless FSC 4730
(R) Fitting, Cross, Standard and Reducer, Flareless FSC 4730
(R) Fitting, Union, Standard and Reducer, Bulkhead, FlarelessFSC 4730
(R) Fitting, Elbow, 90 Degree, Standard and Reducer, Bulkhead,Flareless FSC 4730
(R) Fitting, Tee, Standard and Reducer, Bulkhead on Side,Flareless FSC 4730
(R) Fitting, Elbow, 45 Degree, Standard and Reducer, FlarelessFSC 4730
(R) Fitting, Tee, Standard and Reducer, Flared FSC 4730
Gasket, Metal O-Ring Corrosion and Heat Resistant SteelProcurement Specification for FSC 5330
(Cancelled) Deicing System, Pneumatic Boot, Aircraft, GeneralSpecification for
(R) Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNSS32100 FSC 5330
(R) Gasket - Metal O-Ring, .062 Tube X .006 Wall, Cres - UNSS32100 FSC 5330
(R) Gasket - Metal O-Ring, .062 Tube X .010 Wall, Cres - UNSS31200 FSC 5330
(R) Gasket - Metal O-Ring, .094 Tube X .006 Wall, Cres - UNSS31200 FSC 5330

(R) Gasket - Metal O-Ring, .094 Tube x .010 Wall, Cres - UNSS31200 FSC 5330
(R) Gasket - Metal O-Ring, .125 Tube x .010 Wall, Cres - UNSS32100 FSC 5330
(R) Bolt, Machine - Steel, Diffused Nickel - Cadmium Plated,Double Hexagon Extended Washer Head, Drilled,
UNS K14675, 195 ksi min,.2500-28 UNJF-3A FSC 5306
(R) Nut, Plain, Hexagon, Check - UNS S66286, 130ksi min, SilverPlated FSC 5310; UNS S66286
(R) Nut, Slotted, Hexagon, Shear - UNS S66286, 130 ksi min FSC5310
(R) Nut, Slotted, Hexagon, Shear - Silver Plated, UNS S66286,130 ksi min FSC 5310
(R) Gasket - Metal O-Ring, .035 Tube X .006 Wall, Silver Plated,Cres - UNS S32100 FSC 5330
(R) Gasket - Metal O-Ring, .062 Tube X .006 Wall, Silver Plated,Cres - UNS S32100 FSC 5330
(R) Gasket - Metal O-Ring, .062 Tube X .010 Wall, Silver Plated,Cres - UNS S32100 FSC 5330
(R) Gasket - Metal O-Ring, .094 Tube X .010 Wall, Silver Plated,Cres - UNS S32100 FSC 5330
(R) Gasket - Metal O-Ring, .125 Tube X .010 Wall, Silver Plated,Cres - UNS S32100 FSC 5330
(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated,Hexagon Head, UNS K14675, 195 ksi min, .375024 UNJF-3A FSC 5306; UNS K14675
(Cancelled) Thermal Anti-Icing Equipment, Wing and Empennage
Bearing, Ball, Rod End, Double Row, Precision, Solid Shank,Self-Aligning, Airframe, Type I, -65 Degrees to
300 Degrees F FSC 3110
Bearing, Ball, Rod End, Double Row, Precision, External Thread,Self-Aligning, Airframe, Type II, -65 Degrees
to 300 Degrees F FSC 3110
Bearing, Ball, Rod End, Double Row, Precision, Hollow Shank,Self-Aligning, Airframe, Type III, -65 Degrees
to 300 Degrees F FSC 3110
Bearing, Ball, Rod End, Double Row, Precision, Internal Thread,Self-Aligning, Airframe, Type IV, -65 Degrees
to 300 Degrees F FSC 3110
Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect,Flared Fitting to Internal Thread Boss FSC
4730; Should Be Used Instead ofMS24333
Coupling Assembly, Hydraulic, Self-Sealing, Flareless Fitting toInternal Thread Boss FSC 4730; Should Be
Used Instead of MS24334
Strap, Tiedown, Electrical Components, Adjustable,Self-Clinching, Plastic, Type I, Class 1 FSC 5975; Should
Be Used for NewDesign Instead of MS3367, Which Was Inact
Duct Assembly, Ground, Conditioned Air, Insulated, Flexible
(Cancelled) Minimum Performance Criteria for Falling ObjectProtective Structure (FOPS) January 1981;
Cancellation Notice; Superseded byISO 3449
(Cancelled) Turn Signal Flashers April 1993; Cancellation Notice

(Cancelled) Small Spark Ignition Engine Test Code June 1984;Cancellation Notice; Superseded by J 1349
R(1988)
(Cancelled) Capacity Rating - Loader Bucket R(1985)
(Cancelled) (R) Vehicular Hazard Warning Flashers, Standard June1993; Cancellation Notice
(Cancelled) Labeling of ROPS and FOPS and OPS, Standard January1991; Cancellation Notice
Guide to Safety in Paint Application Editorial Changes July 1,1995 (Steel Structures Painting Manual, Ch 5 Paint Application Specs.)
UL Standard for Safety Ice Makers Seventh Edition; Reprint withRevisions Through and Including June 28,
2001
UL Standard for Safety Pipe Connectors for Petroleum Productsand LP-Gas Eighth Edition; Reprint with
Revisions Through and Including08/17/2001
(Withdrawn) UL Standard for Safety Electric Air Heaters SecondEdition; December 3, 1991, Bulletin April 18,
1990
UL Standard for Safety Diesel Engines for Driving CentrifugalFire Pumps Third Edition; Reprint with
Revisions Through and Including June20, 2001
UL Standard for Safety Fire Test of Roof Deck ConstructionsThird Edition; Reprint with Revisions Through
and Including 03/17/2000
UL Standard for Safety Tests for Sharpness of Edges on EquipmentFourth Edition
Relief Valves for Hot Water Supply Systems FirstEdition; CSA 4.4-M99; CSA 4.4A-2000

(Inactive)Insert, Molded-in, CSK Clearance Hole, Sandwich Panel, Al Alloy and CRES,Metric (Superseded October 1991 Use NA 0235 and NA 0236 for Description ofStat
(Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
StandardSpecification for Turnbuckles, Swaged, Welded, Forged R(2001)
StandardSpecification for Valve Locking Devices R(2001)
StandardSpecification for Gypsum Wallboard
Standard TestMethods for Evaluating Properties of Wood-Base Fiber and Particle PanelMaterials
Standard TestMethod for Foaming Characteristics of Lubricating Oils IP Designation:146/2000; British
Standard 5092
StandardSpecification for Brass Wire
Standard Guidefor Preparation of Zinc-Coated (Galvanized) Steel Surfaces for PaintingE1-2001 R(2001)
Gas Unit Heater and Gas-Fired Duct Furnaces FirstEdition; CGA 2.6-M96; Addenda Z83.8a-1998; Addenda
Z83.8b-2000; CorrectedReplacement June 04 2001
Knob, Control, Short Bar, Metal and Plastic FSC 5355
Knob Control, Bar, Metal and Plastic FSC 5355
Loop, Strap Fastener (Footman's Loop) FSC 5340

Knob-Round, Illuminated and Non-Illuminated, Small FSC5355

Knob - Pointer Illuminated and Non-Illuminated FSC5355
Knob - Round Illuminated and Non-Illuminated, SmallFSC 5355
(Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November
1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
Clevis, Rod End-Plain, Wide and Narrow Forks FSC 5340
Dial, Control, Multi-Turn Counters GeneralSpecification for FSC 5355
Buckle, Spring Action FSC 5340
Knobs, Control, Bar, Plastic FSC 5355
(Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994)
(Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November
1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
(Inactive)Screw-Machine, Non Magnetic High Temperature, Structural, 100 Degree FlushHead (Rev. 5)
(Inactive)Pin, Flat Head Hi-Shear Rivet, Close Tolerance, 1200 Degrees F (Rev. 1)
Knob, Control, Crank, Metal FSC 5355
Addenda to MH1-1997 Pallets, Slip Sheets, and OtherBases for Unit Loads
(Inactive)Pin, Hi-Shear Rivet, 1200 Degrees F (Rev. 2)
Addenda to ASME B30.16-1998 Overhead Hoists (Underhung)
(Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994)
(Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for
Description of Status Notes See NAS 380) (Rev. 13)
(Inactive) RodEnd, Threaded, Alloy Steel, Flash Welding Type (Rev. 7)
(Inactive)Bolt, Close Tolerance, Spline Drive, Alloy Steel, 1800 MPa, Metric (SeeNAS380 for Description of
Status Notes) (Rev. 2)
(Inactive)Nut, Cylinder Lock (Rev. 5)
(Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)

(Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994)
(Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994)
(Inactive)Bolt - Shear, Close Tolerance (Superseded - February 1989 Use NAS 6203 ThruNAS 6220) (Rev. 18)
(Inactive)Control Rod and Tube Assembly .3125-24UNF- 3A Thread (Superseded - August1954 for Definition
of Drawing Status Notes See NAS 380) (Rev. 3)
(Inactive)Collar, Hi-Shear Rivet, 1200 Degrees F (Rev. 1)
(Inactive)Collar (High Strength) High -- Shear Rivet (Rev. 6)
(Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November
1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
(Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for
Description of Status Notes See NAS 380) (Rev. 13)
(Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for
Description of Status Notes See NAS 380) (Rev. 13)
(Inactive)Bolt, Close Tolerance, Spline Drive, Alloy Steel, 1550 MPa, Metric (forDescription of Status Notes
See NAS380) (Rev. 2)
(Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994)
(Inactive)Pin, 100 Degree Csk. Head Hi-Shear Rivet, Close Tolerance, 1200 Degrees F(Rev. 1)
(Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for
Description of Status Notes See NAS 380) (Rev. 13)
(Inactive)Post, Electrical - Mechanical Equipment (See NAS 1831, for Description ofStatus Notes, See NAS
380) (Rev. 2)
(Inactive)Screw - Hex Head, Recessed, Full Thread Use NAS 1801. For Description ofStatus Notes See NAS
380; Rev. 7
(Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994)
(Inactive)Control Rod and Tube Assembly .3125-24UNF- 3A Thread (Superseded - August1954 for Definition
of Drawing Status Notes See NAS 380) (Rev. 3)
(Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994)
(Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994)
(Inactive)Control Rod and Tube Assembly .3125-24UNF- 3A Thread (Superseded - August1954 for Definition
of Drawing Status Notes See NAS 380) (Rev. 3)
(Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November
1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
(Inactive)Knob Control 3/4 Spherical (Use NAS 380) (Rev. 6)

(Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November
1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
(Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
(Inactive) Tee- Universal - Flareless (Rev. 2)
(Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994)
(Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
(Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994)
Addenda to B31.4-1998 Pipeline Transportation Systemsfor Liquid Hydrocarbons and Other Liquids
(Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
(Inactive)Nut, Self-Locking, Plate-One Lug, Low Height, C'Bore, Reduced Rivet Spacing(Rev. 10)
(Inactive)Tube Assembly - Control Steel, with Flash Welded and Threaded Rod-Ends (Rev.3)
(Inactive)Post, Electrical- Mechanical Equipment Swage Type, Metric (Rev. 2) (See NA0213)
(Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
(Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for
Description of Status Notes See NAS 380) (Rev. 13)
(Inactive)Tube Assembly - Control Steel with Flash Welded Clevis and Threaded Rod-Ends(Rev. 3)
(Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994)
(Inactive)Stylus-100 Degree Flat Head Gage (Rev. 1)
(Inactive)Connector, Receptacle, Electrical, Narrow Flange Mount, Bayonet Coupling,Conductive Finish
(Superseded - August 1979, Use MS3470) (Rev. 1)
(Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for
Description of Status Notes See NAS 380) (Rev. 13)
(Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)
(Inactive)Control Rod and Tube Assembly .3125-24UNF- 3A Thread (Superseded - August1954 for Definition
of Drawing Status Notes See NAS 380) (Rev. 3)
(Inactive)Insert, Molded-in, CSK Clearance Hole, Sandwich Panel, Al Alloy and CRES,Metric (Superseded October 1991 Use NA 0235 and NA 0236 for Description ofStat
(Inactive)Bolts - Internal Wrenching Use MIL-B-7838; Rev. 6

(Inactive) Bolt,100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990 Use NAS1580, for
Description of Status Notes See NAS 380) (Rev. 13)
(Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for
Description of Status Notes See NAS 380) (Rev. 13)
(Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994)
(Inactive)Elbow - Universal 90 Degree - Flareless (Rev. 1)
(Inactive) Cap- Protective, Flanged Fitting (Rev. 3)
Electric Lamps: Guidelines for Low Pressure Sodium Lamps
Rigid Steel Conduit - Zinc Coated (GRC)
StandardSpecification for Perforated-Plate Sieves for Testing Purposes R(2001)
StandardSpecification for Concrete Aggregates
StandardPractice for Surface Preparation of Aluminum Alloys to Be Adhesively Bondedin Honeycomb Shelter
Panels E1-2001
StandardPractice for Filtered Open-Flame Carbon-Arc Exposure Apparatus of Paint andRelated Coatings
StandardSpecification for Naval Brass Rod, Bar, and Shapes
StandardPractice for Selecting Bolting Lengths for Piping System Flanged JointsR(2001)
StandardSpecification for Brass Plate, Sheet, Strip, and Rolled Bar
StandardSpecification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire (Metric)
Standard TestMethod for Flash and Fire Points by Cleveland Open Cup IP Designation: 36/84(89); AASHTO
No.: T48; DIN 51 376
StandardSpecification for High-Strength Low-Alloy Structural Steel AASHTO No.: M 161
StandardSpecification for Diesel Fuel Oils
StandardPictorial Surface Preparation Standards for Painting Steel Surfaces SSPC-Vis3; E1-2001 R(2001)
StandardSpecification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and ShapesSupersedes ASTM
B453M-1996
Standard TestMethods for Aniline Point and Mixed Aniline Point of Petroleum Products andHydrocarbon
Solvents IP Designation: 2/98
ProvisionalStandard Specification for Fabricated Shapes and Finished Parts Fabricatedfrom Polyimide Resins
Should Be Used Instead of MIL-R-46198, Which WasCancelle
Standard TestMethod for Motor Octane Number of Spark- Ignition Engine Fuel IP Designation:236/87
Standard TestMethod for Hydrazine in Water
Standard TestMethod for Oxidation Stability of Gasoline (Induction Period Method) IPDesignation: 40/97;
British Standard 4347
StandardSpecification for General Requirements for Wrought Copper and Copper-AlloyPlate, Sheet, Strip, and
Rolled Bar
StandardPractice for Aviation Fuel Sample Containers for Tests Affected by TraceContamination

Standard TestMethod for Research Octane Number of Spark-Ignition Engine Fuel IPDesignation: 237/87
Standard TestMethods for Nondestructive Measurement of Dry Film Thickness of NonmagneticCoatings
Applied to a Ferrous Base
Standard TestMethod for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) IPDesignation: 388/97
StandardSpecification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (NickelSilver), and CopperNickel Alloy Plate, Sheet, Strip, and Rolled Bar
Standard TestMethod for Tensile Properties of Plastics
Standard TestMethods for Nonvolatile Content of Varnishes Reinstated
Standard TestMethod for Air-Entraining Admixtures for Concrete
Standard TestMethod for Distillation of Petroleum Products at Atmospheric Pressure
StandardPractice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, andArches for Storm and
Sanitary Sewers and Other Buried Applications
StandardSpecification for Predecorated Gypsum Board
Standard TestMethods for Sampling and Testing Concrete Masonry Units and Related UnitsE1-2001
StandardSpecification for Fine Aggregate for Bituminous Paving Mixtures
Standard TestMethod for Environmental Stress-Cracking of Ethylene Plastics
Standard TestMethods for Flexible Cellular Materials Made from Olefin Polymers E1-2001
StandardSpecification for Pressure Vessel Plates, Carbon Steel, for Moderate- andLower-Temperature Service
Standard Guidefor Computed Tomography (CT) System Selection E1-2001 R(2001)
StandardSpecification for Kerosine
StandardSpecification for Retroreflective Sheeting for Traffic Control
StandardSpecification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
Standard Practice for Sampling Wrought NonferrousMetals and Alloys for Determination of Chemical
Composition R(2001)
StandardSpecification for Aluminum-Alloy Permanent Mold Castings
Standard TestMethod for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
StandardSpecification for Phosphor Bronze Rod, Bar, and Shapes Supersedes ASTMB139M-1995
StandardPractice for Sampling Bituminous Materials
StandardSpecification for Carbon Structural Steel
StandardSpecification for Rubber Examination Gloves E1-2001
Standard TestMethod for Shear Strength of Adhesives Using Pin-and-Collar Specimen R(1990)
Standard TestMethod for Rubber Property - Vulcanization Using Oscillating Disk Cure Meter
StandardSpecification for Aviation Turbine Fuels
StandardSpecification for Agricultural Liming Materials R(2001)
Standard TestMethod for Chipping Resistance of Coatings

StandardSpecification for Copper-Beryllium Alloy Rod and Bar

StandardSpecification for Rolled Zinc E1-2001
StandardSpecification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.)and Greater E1-2001
R(2001)
StandardSpecification for Rubber Surgical Gloves E1- 2001
Standard Classificationfor Temper Designations for Copper and Copper Alloys - Wrought and Cast
Standard TestMethod for Tensile Properties of Thin Plastic Sheeting
StandardSpecification for High-Strength Low-Alloy Structural Steel with 50 ksi (345MPa) Minimum Yield
Point to 4-in. (100-mm) Thick AASHTO No.: M 222
StandardSpecification for General Requirements for Wrought Copper and Copper-AlloyPlate, Sheet, Strip, and
Rolled Bar (Metric)
Standard TestMethod for Determining Ignition Temperature of Plastics E1-2001 R(2001)
StandardSpecification for High-Temperature Bolting Materials, with ExpansionCoefficients Comparable to
Austenitic Stainless Steels E1-2001
StandardSpecification for Performance of Engine Oils
StandardPractice for Measuring Ultrasonic Velocity in Materials R(2001)
StandardSpecification for Doors, Furniture, Marine
Standard TestMethod for Rubber Property - Durometer Hardness
StandardSpecification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings,and Rolled Ring
Forgings (Metric)
Standard TestMethod for Critical Radiant Flux of Floor-Covering Systems Using a RadiantHeat Energy Source
StandardTerminology Relating to Chain Link Fencing
StandardSpecification for Nonrigid Vinyl Chloride Polymer Tubing
StandardSpecification for Perlite Thermal Insulation Board E1-2001
StandardConsumer Safety Specification for Grab Bars and Accessories Installed in theBathing Area R(1999)
StandardSpecification for Plates, Carbon Steel, for Forging and Similar Applications
StandardSpecification for Age-Hardening Low-CarbonNickel-Copper-Chromium-Molybdenum-Columbium
Alloy Structural Steel Plates
StandardSpecification for Seamless and Welded Unalloyed Titanium and Titanium AlloyWelding Fittings
StandardSpecification for Seamless Brass Tube
StandardSpecification for General Requirements for Wrought Copper and Copper-AlloyRod, Bar, Shapes and
Forgings
StandardSpecification for 3.25-in. Outside Diameter Poly(Vinyl Chloride)(PVC) PlasticDrain, Waste, and Vent
Pipe and Fittings
StandardSpecification for Steel Forgings, Carbon and Alloy, for General IndustrialUse AASHTO No.: M 102
R(2001)
Standard TestMethod for Determination of Lubricity of Two-Stroke-Cycle Gasoline EngineLubricants
Standard TestMethod for Plastic Strain Ratio r for Sheet Metal
StandardPractice for Conditioning and Testing Textiles E1-July 2000

StandardPractice for Controlling Quality of Radiological Examination of ElectronicDevices

Standard TestMethods for Determination of Amine Acid Acceptance (Alkalinity) ofHalogenated Organic
Solvents
Standard Specificationfor Stainless Steel Suture Needle Holders - General Workmanship Requirementsand
Corresponding Test Methods R(1996)
Standard TestMethod for Rubber Deterioration - Crack Growth R(2000)
Standard TestMethod for Resistance to Degradation of Large-Size Coarse Aggregate byAbrasion and Impact in
the Los Angeles Machine
Standard TestMethod for Resistance to Degradation of Small-Size Coarse Aggregate byAbrasion and Impact in
the Los Angeles Machine
StandardSpecification for Stainless Steel Socket Head Cap Screws (Metric)
StandardSpecification for Copper-Silicon Alloy Wire for General Applications
StandardSpecification for Fuel Oils
Standard TestMethod for Low-Pressure Air Test of Vitrified Clay Pipe Lines
StandardSpecification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-RolledE1-2000
Standard TestMethods for Leaks Using the Mass Spectrometer Leak Detector or Residual GasAnalyzer in the
Tracer Probe Mode R(2000)
StandardSpecification for Electric-Resistance-Welded Carbon Steel andCarbon-Manganese Steel Boiler and
Superheater Tubes R(2000)
Standard Specificationfor Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled InsideDiameter
StandardSpecification for Stainless Steel Metric Bolts, Screws, and Studs
Standard TestMethods for Phosphorus in Lubricating Oils and Additives
StandardSpecification for Copper Bar, Bus Bar, Rod, and Shapes E1-2001
StandardSpecification for Design, Fabrication, and Installation of Fences Constructedof Wood and Related
Materials
Standard TestMethod for Stitch Tear Strength, Single Hole
StandardSpecification for Stainless Steel Rope Wire R(2000)
StandardSpecification for General Requirements for Carbon, Ferritic Alloy, andAustenitic Alloy Steel Tubes
R(2001)
Standard TestMethod for Water Absorption (Static) of Vegetable Tanned Leather
StandardSpecification for Seamless and Electric- Welded Low-Alloy Steel Tubes R(2000)
Standard TestMethod for Cracking Resistance of Leather
Standard TestMethod for Colorfastness and Transfer of Color in the Washing of Leather
StandardSpecification for Gypsum Backing Board, Gypsum Coreboard, and GypsumShaftliner Board
StandardSpecification for Alloy Steel Socket Button and Flat Countersunk Head CapScrews (Metric)

StandardSpecification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

Standard TestMethod for Dynamic Water Resistance of Shoe Upper Leather by the Dow CorningLeather Tester
Standard Guidefor Magnetic Particle Examination
StandardSpecification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
StandardSpecification for Contact-Molded Glass-Fiber- Reinforced Thermoset ResinCorrosion-Resistant Tanks
Test Methodfor Sonic Shear Stability of Polymer- Containing Oils
Standard TestMethod for Bulk Specific Gravity and Density of Non-Absorptive CompactedBituminous
Mixtures
Standard TestMethods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as aMineral Admixture
in Portland-Cement Concrete
StandardSpecification for Structural Steel for Ships
StandardSpecification for Seamless and Welded Austenitic Stainless Steel Pipes
StandardSpecification for Copper and Copper-Alloy Seamless Condenser Tubes andFerrule Stock E1-2000
StandardSpecification for Aluminum and Aluminum-Alloy Seamless Pipe and SeamlessExtruded Tube
StandardSpecification for Photoluminescent (Phosphorescent) Safety Markings FSC 9390;Should Be Used
Instead of MIL-L-3891B, Which Was Cancelled on October 16,2000
StandardSpecification for Pressure Vessel Plates, Carbon Steel, Low- andIntermediate-Tensile Strength
StandardSpecification for Perfluoroalkoxy (PFA)- Fluorocarbon Resin Molding andExtrusion Materials
Standard TestMethod for Buckle Tear Strength of Leather
StandardSpecification for Rubber Floor Tile
Standard Test Methods for Rubber Cements R(2001)
Standard Specification for Cast and Wrought GalvanicZinc Anodes
Standard TestMethods for Shear Adhesion of Pressure- Sensitive Tapes E1: 2000
Standard TestMethods and Practices for Emulsified Asphalts AASHTO No.: T59
StandardSpecification for High-Strength Carbon- Manganese Steel of Structural Quality
StandardSpecification for Anodes, Sacrificial Zinc Alloy R(2001)
StandardSpecification for Coal-Tar Pitch Used in Roofing, Dampproofing, andWaterproofing E1-2000 R(2000)
StandardSpecification for Joint Compound and Joint Tape for Finishing Gypsum Board
StandardPractice for Installing Vitrified Clay Pipe Lines
StandardSpecification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form forFoundry and Die Castings
E1- 2001
StandardSpecification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
Standard TestMethod for Blocking

StandardSpecification for Reinforced Concrete Elliptical Culvert, Storm Drain, andSewer Pipe (Metric)
StandardSpecification for Gray Iron Castings for Pressure-Containing Parts forTemperatures Up to 650
Degrees F (350 Degrees C)
StandardSpecification for Aluminum Bronze Sheet, Strip, and Rolled Bar SupersedesASTM B169M-1996
Standard TestMethod for Luminometer Numbers of Aviation Turbine Fuels
Standard TestMethods for Acid Number of Naval Stores Products Including Tall Oil and OtherRelated Products
StandardSpecification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Useas a Mineral Admixture
in Concrete
StandardSpecification for Driven Fasteners: Nails, Spikes, and Staples
StandardSpecification for High Solids Content, Cold Liquid-Applied ElastomericWaterproofing Membrane for
Use with Separate Wearing Course
Standard TestMethod for Sound Absorption and Sound Absorption Coefficients by theReverberation Room
Method
StandardSpecification for Wrought 18 Chromium- 14 Nickel-2.5 Molybdenum StainlessSteel Bar and Wire for
Surgical Implants (UNS S31673)
StandardSpecification for Copper-Beryllium Alloy Wire
Standard TestMethod for Automated Separation and Collection of Particulate and AcidicGaseous Fluoride in
the Atmosphere (Double Paper Tape Sampler Method) E1-2000R
Standard TestMethod for Deflection Temperature of Plastics under Flexural Load in theEdgewise Position
Standard TestMethod for Change in Height at Early Ages of Cylindrical Specimens fromCementitious Mixtures
StandardSpecification for Pressure Vessel Plates, Carbon Steel, for Intermediate- andHigher-Temperature
Service
Standard TestMethod for Freezing Point of Aviation Fuels
Standard TestMethods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
Standard Methods for Mechanical Testing of Welds
(Withdrawn) Specification for Qualification of WeldingProcedures and Welders for Piping and Tubing
Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

Earned Value Management Systems

FOTP-35 Fiber Optic Component Dust (Fine Sand) TestR(1999)
Standard Test Method for Cetane Number of Diesel FuelOil IP Designation: 41/99
Handbook and Guide to Supplement J-STD-001 (IncludesJ- STD-001B to C Comparison) With Amendment 1
(Inactive for Design) Quality Systems - Model forQuality Assurance in Production, Installation and Servicing
Second Edition;(PNS 1002: 1994) (CAN/CSA- ISO 9002-94)

(Inactive for Design) Quality Systems - Model forQuality Assurance in Final Inspection and Test Second
Edition; (CEN EN ISO9003: 1994) (PNS 1003: 1994) (CAN/CSA-ISO
Fluorescent Lamps - Instant-Start and Cold-CathodeTypes - Dimensional and Electrical Characteristics
Includes SupplementsC78.3a-1995; C78.3d-1998 R(1996)
Steel, Barsand Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted,Annealed Heat
Treatable to 290 ksi (1999 MPa) Tensile Strength UNS K92580
Steel, Bars,Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) PremiumAircraft-Quality, Consumable
Electrode Vacuum Melted UNS G52986
Steel, Sheet,Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) UNSK33517
Nuts,Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 Degrees FProcurement
Specification FSC 5310
(Noncurrent)Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co -4.0Mo - 2.9Ti 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Pre
Stress-RuptureProperties of Castings
AluminumAlloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651,7075-T652) Solution
Heat Treated, Mechanically Stress Relieved, andPrecipitation He
SteelCleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels MagneticParticle Inspection
Procedure
Steel, Barsand Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted,Annealed Heat
Treatable to 280 ksi (1931 MPa) Tensile Strength UNS K92580
(Noncurrent)Forgings, Magnesium Alloy 2.0Th - 0.78Mn (HM21A - T5) Precipitation HeatTreated
(R) HoseAssembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, LowPressure, Up to 400 Degrees
F, Aircraft
Nickel-IronAlloy, Magnetic, Sheet and Strip 50Ni - 50Fe Annealed, Forming Grade UNSK95000
Steel, Sheet,Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) UNS T20811
BerylliumBars, Rods, Tubing, and Shapes 4.25BeO - 94Be High Micro-Yield Strength
Steel, Sheet,Strip, and Plate 0.95Cr - 0.20Mo (0.30 - 0.35C) UNS G41300
Standard Specification for Nickel-Chromium-Iron Alloys(UNS N06600, N06601, N06603, N06690, NO6693,
N06025, and N06045) andNickel-Chromium-Cobalt-Molybdenum Alloy (U
Nuts,Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal1200 Degrees F Use, UN
Thread Form FSC 5310
(Noncurrent)Steel, Sand, Castings, 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340)Normalized and
Tempered UNS J24060
Elbow, 90Degree, Pipe, Internal and External Thread FSC 4730
DetailedSpecification for Aircraft Pressure Refueling Nozzle
SteelCleanliness, Aircraft Quality Magnetic Particle Inspection Procedure

Alloy,Corrosion and Heat Resistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo -2.5W - 1.0Cb - 0.15N
Solution Heat Treated UNS R30155
BerylliumBars, Rods, Tubing, and Shapes Instrument Grade
Standard Test Methods for Resistance of AdhesivePreparations in Container to Attack by Bacteria, Yeast, and
Fungi
Steel,Corrosion and Heat Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti -2.0Cu Vacuum Induction
Plus Consumable Electrode Vacuum Melted Solution HeatTreate
Steel, Bars,Forgings, and Tubing 0.80Cr (0.90 - 1.03C) for Bearing Applications
Steel,Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (SAE 30304) Solution HeatTreated UNS S30400
(Noncurrent)Electroless Nickel Plating Low Phosphorus
Standard Specification for Concrete Brick
(Noncurrent)Steel Bars, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Cold Finished UNSK91456
Nickel Alloy,Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co- 3.2Mo - 3.2W 18.5Fe Solution Heat Treated UNS N06333
(Noncurrent)Steel Sheet and Strip, Aluminum Coated Low Carbon
Standard Specification for Zinc Coating (Hot-Dip) onIron and Steel Hardware AASHTO No.: M232

Steel, Barsand Forgings, Maraging 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) DoubleVacuum Melted,
Solution Heat Treated UNS K91970
(Noncurrent)Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340Modified) Annealed
UNS J24060
(Noncurrent)Bearings, Silver-Clad Steel Strip FSC 3120
Standard Test Method for Determination of the Abilityof Lubricants to Minimize Ring Sticking and Piston
Deposits in Two-Stroke-CycleGasoline Engines Other Than Outb
Standard Specification for Stainless Steel Socket-SetScrews
SteelCleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels MagneticParticle Inspection
Procedure Metric (SI) Measurement
(Noncurrent)Ceramic Moldings and Extrusions Dense, Ultra-High Alumina (99% A1203)
(Cancelled)Rings, Sealing, Phosphonitrilic (FX) Fluoroelastomer High-Temperature-FluidResistant 85-95
Standard Specification for Diesel Fuel Oils

Steel, Sheet,Strip, and Plate 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) UNS K11914
BerylliumBars, Rods, Tubing, and Shapes High Ductility Grade
Steel Tubing,Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved UNS G10250
Steel, Bars,Forgings, and Tubing 0.31 - 0.38C (SAE 1035) UNS G10350
Standard Specification for Asphalt Shingles (OrganicFelt) Surfaced with Mineral Granules
Iron-NickelAlloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6TiSolution Heat Treated,
Precipitation Hardenable Multiple Melted, HighTemperature, L
Steel,Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo -2.1Ti - 0.006B - 0.30V 1800
Degrees F (982 Degrees C) Solution Heat TreatedUNS S
Steel Tubing,Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress RelievedUNS
G41350
(Noncurrent)Flux, Aluminum Dip Brazing 1090 Degrees F (588 Degrees C) Fusion Point UseAMS 3415
Carburizingand Heat Treatment of Carburizing Grade Steel Parts
Carbon Steel,Wire and Springs 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn UNS G10800
Standard Specification for Loadbearing ConcreteMasonry Units
Steel,Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution HeatTreated and Cold Drawn 125
ksi (862 MPa) Tensile Strength UNS S30200
(R) Fitting,Elbow, 90 Degree, Flared to Pipe FSC 4730
(Noncurrent)Steel Sheet, Strip, and Plate, Maraging 19Ni - 3.0Mo - 1.4Ti - 0.10Al DoubleVacuum Melted,
Solution Heat Treated R(1992)
(Cancelled)Rings, Sealing, Ethylene Propylene (EPM) Rubber, Phosphate Ester HydraulicFluid Resistant 85 95
Standard Specification Nickel-Chromium-Iron Alloys(UNS N06600, N06601, N06603, N06690, NO6693,
N06025, and N06045) andNickel-Chromium-Cobalt-Molybdenum Alloy (UNS N
Standard Specification for Normalized High-StrengthLow-Alloy Structural Steel Plates
Steel Strip0.68 - 0.80C (SAE 1074) UNS G10740
Steel, Sheet,Strip, and Plate 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) ConsumableElectrode Melted
UNS G43400
Bolt, Tee Head- AMS 5708, Chamfered, .1900-32 UNJF-3A
BerylliumBars, Rods, Tubing, and Shapes Standard Grade

Steel,Maraging, Bars, Forgings, Tubing, and Rings, Maraging 19Ni - 3.0Mo - 1.4Ti - 0.10AlDouble Vacuum
Melted, Annealed
Nickel Alloy,Corrosion and Heat Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo -2.9Ti - 1.4Al 0.006B - 0.08Zr Consumable Electrode or Vacuum Induction Me
(Noncurrent)Braid, Flat, Nylon, Electrical Tying Synthetic Rubber Coated
Steel, Sheet,Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)Vacuum Consumable
Electrode Melted, Annealed UNS K33517
Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel IP Designation: 236/87
Standard Specification for Hollow Brick (HollowMasonry Units Made from Clay or Shale)
(Noncurrent)Cloth, Glass Style 7781, Chrome-Silane Finish
BerylliumBars, Rods, Tubing, and Shapes Optical Grade
Nuts,Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal1200 Degrees F Use, UNJ
Thread Form FSC 5310
(Noncurrent)Steel Bars, Forgings, and Tubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C)Consumable Electrode
Vacuum Melted UNS K18597
(Noncurrent)Cloth, Type "E" Glass, "B" Stage Epoxy-Resin-Impregnated, 7781 Style Fabric, Flame Resistant
R(1995)
Nickel Alloy,Corrosion and Heat Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co- 4.2Mo - 3.0Ti 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum In
Standard Specification for Steel, Sheet, Cold-Rolled,Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy withImproved Formability Supersedes A
Standard Test Method for Research Octane Number ofSpark-Ignition Engine Fuel IP Designation: 237/87
Nut,Self-Locking, UNS S66286, 1200 Degrees F, 160 000 psi, UNJ Thread FSC 5310
(R) Nut,Hexagon, Drilled, Boss Connection, Cres - UNS S30400 UNS S30400; FSC 5310
(Noncurrent)Crystallized Glass Ceramic
Standard Test Methods for Ability of Adhesive Films toSupport or Resist the Growth of Fungi
(Noncurrent)Steel, Maraging, Sheet, Strip, and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti -0.10Al Consumable
Electrode Melted, Solution Heat Treated UNS K92890
Cobalt Alloy,Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni -14.5W - 0.07La
Solution Heat Treated UNS R30188
(Noncurrent)Steel Wire, Corrosion Resistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti -2.0Cu Precipitation
Hardenable, Spring Temper UNS S45500
10/19/2001 (16p)

Standard Specification for Polypropylene Injection andExtrusion Materials

09/28/2000 (30p)
Standard Test Method for Oxidation Stability ofDistillate Fuel Oil (Accelerated Method) IP Designation:
388/97
Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement AASHTO No.: M
31
Standard Practice for Preparation, Standardization,and Storage of Standard and Reagent Solutions for Chemical
Analysis E(2001)R(2001)
Standard Test Method for Obtaining Hydrostatic DesignBasis for Thermoplastic Pipe Materials
Standard Specification for Style 1 Stainless SteelMetric Nuts
Standard Specification for Nonloadbearing ConcreteMasonry Units
Standard Specification for Castings, Nickel and NickelAlloy E(2001)

Standard Classification System for Nylon Injection andExtrusion Materials (PA)

Standard Test Method for Shear Modulus at RoomTemperature
Standard Specification for Nonferrous Nuts for GeneralUse
Standard Test Method for Sulfur in Petroleum Products(High-Temperature Method)
Standard Specification for Cold-Formed Welded andSeamless Carbon Steel Structural Tubing in Rounds and
Shapes
Standard Test Method for Acid and Base Number byColor- Indicator Titration IP Designation: 139/98; British
Standard 2634
Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

Standard Specification for Automotive Spark-IgnitionEngine Fuel

Standard Test Method for Tensile Properties ofAdhesive Bonds
Standard Test Method for Low-Temperature Viscosity ofLubricants Measured by Brookfield Viscometer
R(1993)
Standard Specification for Nonferrous Bolts, Hex CapScrews, and Studs for General Use (Metric)
Standard Specification for Rope-Lay-Stranded CopperConductors Having Concentric-Stranded Members, for
Electrical Conductors
Standard Specification for Corrugated Steel Pipe,Metallic-Coated for Sewers and Drains AASHTO No.: M
36/M 36M

Standard Test Method for Oxidation Stability ofInhibited Mineral Insulating Oil by Pressure Vessel
Standard Practice for Verification and Classificationof Extensometers System E(2001)
Standard Specification for Prefabricated MasonryPanels
Standard Specification for Nonferrous Nuts for GeneralUse (Metric)
Standard Specification for Rolled Zinc
Standard Terminology for Composite Materials
Standard Specification for Gray Iron Castings ReplacesASTM A 48M-94
Standard Specification for Stainless Steel Socket SetScrews (Metric)
Standard Test Method for Density, Relative Density(Specific Gravity), and Absorption of Coarse Aggregate
Standard Specification for Copper-Nickel-Silicon AlloyRod and Bar
Standard Test Method for Bromine Numbers of PetroleumDistillates and Commercial Aliphatic Olefins by
Electrometric Titration IPDesignation: 130/98
Standard Specification for Zinc (Hot-Dip Galvanized)Coatings on Iron and Steel Products

Standard Specification for Rubber Seals ContactingLiquids in Solar Energy Systems R(2001)
Standard Test Method for Volatile Matter (Moisture) ofLeather by Oven Drying R(2001)
Standard Specification for Nickel-Chromium-Iron Alloys(UNS N06600, N06601, N06603, N06690, NO6693,
N06025, and N06045) andNickel-Chromium-Cobalt-Molybdenum Alloy (U
Standard Specification for Piping Fittings of WroughtCarbon Steel and Alloy Steel for Moderate and High
Temperature Service
Standard Specification for Stainless Steel Socket HeadCap Screws
Standard Practice of Calibration of Force-MeasuringInstruments for Verifying the Force Indication of Testing
Machines
Standard Specification for Ultra-High-Molecular-WeightPolyethylene Molding and Extrusion Materials
Standard Test Method for Thermal Endurance of FlexibleElectrical Insulating Varnishes
Standard Practice for Rubber - Materials, Equipment,and Procedures for Mixing Standard Compounds and
Preparing StandardVulcanized Sheets R(1994)
Standard Specification for Poly(Vinyl Chloride)(PVC)Corrugated Sewer Pipe with a Smooth Interior and
Fittings
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite
Sewer Piping
Standard Specification for Flexible Cellular Materials- Urethane for Furniture and Automotive Cushioning,
Bedding, and SimilarApplications
Standard Specification for Superstrength Alloy SteelForgings
Standard Test Method for Thermal Oxidation Stabilityof Aviation Turbine Fuels (JFTOT Procedure) IP
Designation: 323/99 E(2001)
Standard Test Method for Roll Stability of LubricatingGrease E(2001)

Standard Specification for Nonrigid Vinyl ChloridePolymer and Copolymer Molding and Extrusion
Compounds R(2001)
Standard Test Method for Water Content of Soil andRock in Place by Nuclear Methods (Shallow Depth)
Standard Specification for Concrete Made by VolumetricBatching and Continuous Mixing
Standard Terminology Relating to Resilient FloorCoverings
Standard Specification for Concrete Masonry Units forConstruction of Catch Basins and Manholes
Standard Specification for Sampling Procedure forImpact Testing of Structural Steel AASHTO No.: T 243
Standard Specification for Weldless Chain
Standard Test Method for Water Absorption of CoreMaterials for Structural Sandwich Constructions
Standard Test Method for Determining the Presence ofLead Salts in Leather R(2001)
Standard Specification for Polyethylene (PE) PlasticPipe (DR-PR) Based on Controlled Outside Diameter
Standard Specification for Thermoplastic Gas PressurePipe, Tubing, and Fittings
Standard Specification for Steel Sheet, MetallicCoated by the Hot-Dip Process and Prepainted by the CoilCoating Process forExterior Exposed Building Products
Standard Test Method for Density, Relative Density(Specific Gravity), and Absorption of Fine Aggregate
Structural Welding Code - Steel
TP-10A Fluid Immersion Test Procedure for ElectricalConnectors and Sockets
TP-42B Impact Test Procedure for Electrical Connectors
TP-53B Nitric Acid Vapor Test, Gold Finish TestProcedure for Electrical Connectors and Sockets
TP-83 Shell-to-Shell and Shell-to-Bulkhead ResistanceTest Procedure for Electrical Connectors
TP-22B Simulated Life Test Procedure for ElectricalConnectors
TP-23B Low Level Contact Resistance Test Procedure forElectrical Connectors and Sockets
Electrical Performance Standards for High ResolutionMonochrome Closed Circuit Television Camera
TP-45A Firewall Flame Test Procedure for ElectricalConnectors
Requirements for Soldered Electrical and ElectronicAssemblies
Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni(SAE 30301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa)
Tensile Strength UNSS30100
Installation Procedures and Torques for FluidConnections

Steel, Corrosion and Heat Resistant, Bars, Wire, andForgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.200.25C) Hardened andTempered UNS S42200
Steel, Corrosion and Heat Resistant, Wire 18Cr -10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated UNS
S32100
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38- 0.43C) (SAE 4140) Annealed UNS G41400
Steel, Corrosion and Heat-Resistant, Bars, Wire,Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B 0.30VConsumable Electrode Melted 1650 Degrees F (899 D
Steel, Corrosion Resistant, Sheet, Strip, and Plate16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated,
Precipitation HardenableUNS S17400
Method-Pressure Drop Tests for Fuel System Components
Steel, Corrosion and Heat Resistant, Bars, Wire,Forgings, Tubing, and Rings 12.5Cr (SAE 51410) Annealed
UNS S41000
(R) Nut, Plain, Hexagon - Drilled, Silver Plated - UNSS66286, 130 ksi min FSC 5310; UNS S66286
Manufacturing and Inspection Standards for PreformedPackings (O-Rings)
Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30ZnHalf Hard (H02) UNS C26000
Steel, Corrosion and Heat Resistant, Sheet, Strip, andPlate, 12.5Cr (SAE 51410) Annealed UNS S41000
Steel, Maraging, Investment Castings 17Ni - 10Co -4.6Mo - 0.30Ti - 0.06Al Vacuum Melted, Homogenized,
Overaged, and SolutionHeat Treated UNS J93010
Plating, Cadmium Low Hydrogen Content Deposit
Steel, Corrosion and Heat-Resistant, Bars, Wire, andForgings 18Cr - 13Ni - 2.1Mo Free Machining Solution
Heat Treated UNS J92200
(Noncurrent) Nut, Plain Hex - UNS G87400, CadmiumPlate, MJ Thread, Metric Reaffirmed Noncurrent
November 2001; UNS G87400; FSC5310
Steel, Corrosion and Heat-Resistant, Welding Wire 27Cr- 21.5Ni UNS S31080
Steel, Corrosion and Heat Resistant, Welding Wire 15Cr- 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum
Induction Melted,Environment Controlled Packaging UNS S66286
Steel, Corrosion and Heat Resistant, Sheet, Strip, andPlate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed UNS
S42000
Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe
UNS N06002
Steel, Corrosion Resistant, Wire 19Cr - 9.5Ni (SAE30304) Solution Heat Treated UNS S30400
Steel, Corrosion Resistant, Seamless Tubing 19Cr -10Ni (SAE 30304) Solution Heat Treated UNS S30400
Steel, Welded Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C)(SAE 4130) UNS G41300

Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5SnAnnealed, 110 ksi (758 MPa) Yield Strength UNS R54520
Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr(7049-T73) Solution and Precipitation Heat Treated
UNS A97049
Steel, Corrosion and Heat-Resistant, Bars, Wire,Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti 0.006B - 0.30VConsumable Electrode Melted, 1800 Degrees
Steel, Corrosion and Heat Resistant, Sheet, Strip, andPlate 12Cr (SAE 51410 Modified) Ferrite Controlled,
Annealed UNS S41000
Nickel Alloy, Corrosion and Heat-Resistant, WeldingWire 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al UNS N06231
Nickel, Sheet and Strip Low (0.02 Max) Carbon AnnealedUNS N02201
(Noncurrent) Nut, Plain Hex - Thin, UNS G87400,Cadmium Plate, MJ Thread, Metric FSC 5310; UNS
G87400
Steel, Corrosion and Heat Resistant, Bars, Wire, andForgings 12Cr - 0.50Mo Annealed UNS S41025
(Noncurrent) Bolt-Machine, Hex Head, Drilled, PDShank, MJ Thread, AMS 6322, Cadmium Plate, Metric
Reaffirmed NoncurrentNovember 2001; FSC 5306
Nickel Alloy, Corrosion and Heat-Resistant, WeldingWire 72Ni - 3.0Mn - 20Cr - 2.5Cb UNS N06082
Aluminum Alloy Forgings and Rolled or Forged Rings6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6)
Solution and PrecipitationHeat Treated UNS A92219
Steel, Corrosion and Heat Resistant, Wire 18Cr -11.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated UNS
S34700
Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr -1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode
Vacuum RemeltedNormalized and Tempered
Steel, Corrosion and Heat-Resistant, Bars, Wire,Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B 0.30VConsumable Electrode Melted, 1650 Degrees F (899
Nickel-Iron Alloy, Corrosion and Heat Resistant,Welding Wire 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 35Fe
Steel, Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo- 0.12V (0.45 - 0.50C) Consumable Electrode Vacuum
Melted UNS K24728
Steel Tubing, Welded (0.22 - 0.28C) (SAE 1025)Normalized or Stress Relieved UNS G10250
Nut, Self Locking - Spline Drive, Extended Washer, UNSG87400, Cadmium Plate, MJ Thread, Metric FSC
5310; UNS G87400 R(2001)
Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 72Ni - 15.5Cr - 1.0Cb - 2.4Ti - 0.70Al - 7.0Fe UNS
N07069
Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe- 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta
0.30Al - 0.05Zr - 0.05La -0.20N UNS R30556
Cobalt Alloy, Corrosion and Heat Resistant, HardfacingRod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo UNS
R30021
(R) Fitting, Tee, Standard and Reducer, Bulkhead onRun, Internal Port on Side, Flareless FSC 4730

Coatings, Polyurethane, Rain Erosion Resistant forExterior Aircraft and Missile Plastic Parts FSC 8010
(R) Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
Bolt, Tee Head, Interface Surface, Dimensions for
Nickel Alloy, Corrosion and Heat-Resistant, Bars,Wire, Forgings, and Rings 61Ni - 20.5Cr - 8.5Mo - 3.4Cb 1.3Ti - 5.0FeConsumable Electrode or Vacuum Induction Mel
Hole Sizes, Recommended for Metric Fasteners onPropulsion Equipment
Steel Bars 1.0Cr - 0.20Mo - 0.045Se (0.39 - 0.48C)(4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield
Strength Free MachiningUNS K11542
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28- 0.33C) (SAE 4130) UNS G41300
Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al 0.006B Vacuum InductionMelted, Solution Heat Treated
Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 70Ni - 2.4Mn - 15.5Cr - 3.0Ti - 7.0Fe UNS N07092
Titanium Alloy Forgings 10V - 2Fe - 3Al ConsumableElectrode Melted, Solution Heat Treated and Aged 173
ksi (1193 MPa) TensileStrength
Steel, Corrosion and Heat Resistant, Welding Wire11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V UNS S41780
Nickel Alloy, Corrosion and Heat Resistant, Sheet,Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti 0.50Al - 18FeConsumable Electrode or Vacuum Induction Mel
Plating, Chromium Hard Deposit
Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni -0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified
98BV40) UNS K11940
(R) Nut, Plain, Castellated, Hexagon - UNS S66286, 130ksi min FSC 5310; UNS S66286
(R) Gasket - Metal O-Ring, .094 Tube X .006 Wall,Silver Plated, Cres - UNS S32100 FSC 5330
(Noncurrent) Bolt, Machine-Spline Extended Washer, PDShank, Long Thread, AMS6322, Cadmium Plated,
Metric Reaffirmed NoncurrentNovember 2001; FSC 5306
Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al 18Fe ConsumableElectrode or Vacuum Induction Melted UNS N0
Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, andForgings 50Ni - 50Fe UNS K95000
Balls, Steel, Corrosion-Resistant 17Cr Annealed UNSS44002, S44003, S44004
Steel, Corrosion-Resistant, Bars, Wire, and Forgings18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution
Heat Treated UNS S30360
Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni -4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for
Bearing ApplicationsDouble Vacuum Melted UNS K91231

Steel, Maraging, Investment Castings 18.5Ni - 9.0Co -5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized,
Overaged, and SolutionHeat Treated UNS J93150
Piloted Ring Seal Tube Swivel Connection Assembly
(R) Nut, Hexagon, Drilled, Boss Connection, Aluminum -UNS A92014 FSC 5310; UNS A92014
12/7/2001 (16p)
Guide to Formwork for Concrete
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate,
Sheet, and Strip
Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride)(PVC) Plastic Drain, Waste, and
Vent Pipe and Fittings
Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
Standard Specification for Rubber Surgical Gloves
Standard Specification for Rubber Examination Gloves
Standard Test Method for Thickness of Pressure- Sensitive Tapes