Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Jan & Feb Orals Question Chennai MMD

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 90

Internal: Chowdry

External: Mani
nau
Function3
1 What is TSMA or TSMI?
2 What is Tanker?
3 Tell full about chain?
4 Why are you going to drydock?
5 What and all checks you will carry out on the anchor while drydocking?
6 What are the six annexes?
7 Explain annex 4 ? What does your ship takes measure to control Annex 4?
8 What is the rate of discharge in Sewage?
9 What is green passport?
10 Annex 6 certificates?
11 Why during combustion NoX gets higher?
12 Reduction of air pollution in the cylinder?
13 What is SEEMP?
14 What is EEDI? Explain EEDI?
15 will all your ships in your company will have SEEMP?
16 Completely explain about Hypermist?
17 What is fitted on top of hypermist?
18 Tell hypermist manual and auto operation completely?
19 Co2 what are the checks and maintenace?
20 Semi balanced rudder visualise in front of you, and find out and all you find on it?
21 If you attach the rudder and propeller in front what will happen?
22 In steering gear, how linear motion converted to rotary motion?
23 Regulations of steering gear?
24 Why 30-35degree rudder movement in how many minutes?
25 Why 30-35 degree?
26 what is the annex other than six annexes?
27 Explain ballast water management in detail?
28 Explain about anti-fouling system, why it came into existence?
Function 3
1 Line plan
2 Shell expansion plan
3 Docking plan
4 MLC 2006
5 steering gear safety regulation
6 Stern frame
7 Ballast water management MARPOL?
8 shear stress
9 Purpose of bulkhead?
10 STCW95 to STCW2010 difference?
11 Your a third engineer, YOu have to do crosshead bearing survey,
What you will do?

1st attempt
third person
func all applied
battery safeties
steering gear safeties
e/r ovhd crane safeties
gravity disc selection methods
wat is interface, how it is maintained
motor overhaul
bunker procedure, prechecklist, bdn, formula
annex 6 documents
tappet clearance and procedure
cylinder head overhaul
compressor parts, procedure to start manually
centrifugal pump clearances
emergency battery supplies
and lots of cross questions for everything we say
29/01/2015,chowdry sir.....applied 4b,most awaited attempt.....1.why tappet clearance provided 2.wat s
rotocap?why rotocap?wat is bellievellie washer? 3.wat is compound guage?wer u hav seen in ur ship?
4.wat s sample cooler?why it s provided?wat type of cooler?speciality of cooler he asked me wen i hav
given my first attempt? 5.one unit exhaust temp rise reasons? 6.crankcase explosion how fire triangles
completed there?preventive measures?omd working and types? 7.why turbocharger?wat type of
superchargers u know?types of turbocharging?difference between both? 8.wat all the clearance and
checks in piston? 9.wat is meant by atomization of fuel?how it gets atomized?how pressure created in fuel
line?how fuel pump works?...wen i was telling abt fuel pump,he said ok..go and apply coc:-)i started (at
31.07.14) and ends wit mr.chowdry sir.....thanks to all group members...special thanks to abdul azeez,
kalanthar masthan ausrik,pazhani arul,sesh sai,arun sivam,dayal mukesh, rakesh parthasarathy and all my
batchmates whoever helped me a lot frm beginning:-)keep post ur questions all the best:-)
Like

Function 4b
1 What are the preparation and checks before you overhaul as fourth engineer?
2 Turbocharger grouping?
3 After removing piston, what and all checks you will do?
4 piston crown guauge, profile gauge
5 piston weight?
6 auxiliary engine trips?
7 Uniflow scavenging?
8 Air compressor how many?
9 If air compressor fails what you will do?
Function 5
1 Air circuit breaker safeties
( auxlilary conatactor, main contactor)
2 preferential trip?
3 Emergency generator how it starts?
4 What are the supplies from ESB?
5 motor overhauling?

Function 6
1 What are the pumps in your ship?
2 Where and all centrifugal pump is used?
3 Where and all reciprocating pump is used in ship?
4 In Westfalia purifier, how the oil recirculated arrangement?
Function 3
1 what is flare of the ship? what is the purpose of flare
according to layman's term?
2 annex 5, annex 6 discharge criteria?
3 IOPP equipments?
4 OWs working?
5 LBP? what is the use of LBP?
6 what is the use of STP?
7 what are the type of STP in your ship? (Biological)

gopi
no-external
start on 6.15 evening
random and fast furious question
what sox presently?
define sox unit (m/m)?
co2room room area calculation formula?
omdc machine?
air gap at alternator?
if less and high wht happen?
steering motor safeties?
indicator cock types?
gland packing material on central.pump?
lub oil prop.?
fun 3explain slop tank n its location
annex 1 cargo bilge discharge
electrical fire wht type of extinquisher.
hw to use co2 fire extin n precautions bfr using co2
ISPS
safetys near boiler fr fire fighting
fun 4b
Ur eng specification
one unit of ME showing high exh temp during watch keeping resons n cause
what r the parts ll affect due to burn n hw to measure
cylinder liner wear
explain AE lubrication system n whc r the parts r lubricated.
fun -5
lead acid batt chemical equ n hw thy balance
hw batt getting charge n draw trickle circuit diagram
if motor immersed in salt water ur actions
fun 6
cylinder wear check n wht all the measurement u ll tk
wht s tappet clearence? hw u ll tk?

y need to measure? whc vlv has more tappet?


thts it i can remeber guys..
smile emoticon gt one fun 6 MEP.
Attempt 2
28/1/15
Surveyor : shiva Narayanan (svce)
All functions
Function 3
1.Loa
2.Lbp , significance
3.Flare purpose
4.What all the fixed fire fighting in e/r
Explain diff btw sprinkler and hyper mist , hyper mist and co2
5.annex 5,6
6. Iopp equipments
7.foam type extinguisher in er
8.enclosed space permit
Function 4b
1. Engine specification
2.piston overhaul (clearance)
3.preparing for piston over haul
4.turbocharger grouping
5.scavenging types
6.draw uniflow scavanging
Function 5
1.Msb safety for generators
2.preferrential trip
3.motor overhaul
4.tests in motors
5.emg generators starting arrangements
6.battery room safety
7.supply from emg generators
8.crane safety
Function 6
1.types of pump on board
2.were all centrifugal pump used
3.reciprocating pump uses on board
4.ows working
5.STP wen both blowers fail wat u do
RESULT : 4b , 5
Function 4b
1 Surging of turbocharger,what you will do?
2 Refrigeration lub oil properties?
3 Engine reversing?
4 Various interlocks?
a Turning gear interlock
b running direction interlock
c blower should be in auto mode

d Spring air pressure


e complete reversing achieved
5 Maine engine trips, safeties?
6 Accumulation pressure test?
7 When will you do accumulation pressure test?
8 Refrigerant properties?
9 Boiler water test?
Why P- Alkalinity
Why M- Alklainity
Ph-value
10tapper clearance
Function 3
1 Angle of loll
2 Class A, class B, class C bulkhead
3 Standard fire test
529,625,718,825,829,950
4 fixed fire fighting system
5 Co2 regulation
6 Foam regulation
7 Annex 4-discharge criteria
8 Before discharge, what and all you will check in STP?
Internal GOPI SIR
Fun3
Emergency fire pump reg
Sox limit in eca
Stable unstable ship
Fun4
Aux engine saftey
Compression ratio
Flywheel
Fun5
Single phasing
Thermistor
Msb saftey
Reverse power trip
Types of fuse
Function of fuse
Fun 6
Main bearing clearance
Emergeny fire pump not giving presure wat u vl check?
Gravity disk how to select?
Got fun 5

Date: 30.01.2015
2nd person
Internal : choudry sir.

Which company, type of ship.


1. What is bilge keel.
2. Angle of loll.
3. Metacentri height, cross questions
4. Bitter end
5. Spurling pipe.
6. Howse pipe.
7.anchor dropping procedure.
8. Windlass safeties.
9. Marpol all annexures.
10. Annexure 1 explain.
11. Orb entries. Cross questions.
4b and 6.
1. Type of engine.
2.What is bore cooling.
3. Purifier working principle.
4.gravity disc.
5. Interface.
6. Purifier over flow reasons.
7. Bore cooling.
8.Purifier cross questions.
9. Hydrodynamic and hydrostatic lubrication difference.. where used..
Fn 5.
1.Msb safeties.
2.reverse power trip.
3.trickle charge.
4. Short circuit.
5. Clampmeter, cross questions.

Function 3
1 Aspect ratio
It is the ration of depth to width ratio
2 Torsion box
To avoid the racking effect caused by the shear stress on the vessel
3 Racking?
When a ship rolls, there is a tendency of ship to distort transversely, so the
entire picture frame may get collapsed.
4 Annex 6- how will you control NOx, SOx
NOx, SOx value
5 How NOx is formed?
6 Annex 1 discharge criteria
7 Angle of loll?
how will you rectify angle of loll?
8 NT, GT, NT and GT formula
9 Free surface effect?

10 LCF-Longitudinal centre of flotation?


11 Reserve buoyancy?
12 DCP extinguisher maintenance
13 CO2 bottle regulation
14 Co2 system regulation
15 Co2 room safeties?
a It should be insulated.
b Proper ventillation
c Height of Co2 room should be 2.3m
d Door should be open from outside of adjacent side of the compartment should be gas free.
Internal: Gopi sir
No external
Attempt 2
1.Type of ship sailed ?
2.Fixed fire fighting system used for deck?
3.How to find the co2 fully released to the cargo hold?
4.Aux engine trips ?
5.Difference between reverse power trip and reverse current trip ? is both reverse current and reverse
power are same ?
6. Sox at present emmission value ?
7.SECA emmission value?
8.ISPS
9.what is cavitation?
10.where you can find cavitation?
11.sea water piping material?
12 .MGPS fullform vollts and current ?
13.Enclosed space entry?
14. Bullbose bow why it is used?
15.Alternator side checks to be carried?
16.If air gap is more or less what all the consequences?
17. Shell and tube head ex changer end cover removing procedure ?
Lot of cross questions & these are the questions i remember guys
Got Fun 6
28/1/2015
Attempt #2
Surveyor: External Mr.Shiva Narayanan
Result: function 5
Function 3:
Type of ship.
What questions were asked last time?
Value of LOA & LBP. Not definition, numerical value. Significance of each.
Freeing ports.
Number of anchors and their weight.
Types of fire extinguishers in the accommodation.
How many thrusters?
Bow thruster - what does it do and how does it help? What is the arrangement and the direction of rotation
of the bow thruster with respect to the propeller?
IOPP equipment.

Number of fire main isolation valves and location.


Fixed fire fighting systems in the engine room.
Difference between water mist and hypermist.
Enclosed space entry permit and checklist items.
Function 5:
What can be seen when you look at MSB?
Conditions for paralleling of generators.
Earth fault indicator location. How will you rectify an earth fault?
Functions 4b and 6:
Main engine specification.
Number of relief valves on the main engine.
Oil mist detector working. What type did you have on your ship?
Preparation 48 hours prior to unit overhaul.
Number of generators, their power, voltage and amperage.
Did you have shaft generator?
Number of purifiers and manufacturer.
Is fuel oil heated before the purifier or after? If before, why?
How will you start an incinerator?
Types of pumps in the engine room.
What type of pump was the bilge pump?
What will happen to a reciprocating pump if it is started with the discharge valve closed?
5 examples of centrifugal pumps.
Checks and inspections on the crane and SWL.
Sewage treatment plant type.
STP blowers fail, what will you do?
29/1/2015
Internal: Gopikrishan
External: Mani
CHOWda
Function 4b
1 4 stroke engine
2 how reversing takes place
3 how cpp works
4 what is pitch
5 By changing the pitch, what happens?
6 Exhaust temperature of one unit is increasing, what are the reasons?
7 Scavenge temperature increases what are the reasons?
7 How fuel pump timing changing?
8 Cylinder lub oil properites?
9 Microbial degradation?
10 TBN
11 What does TBN do?
12 Power card?
13 How will you calculate power?
14 difference between power card and draw card?
29/1/2015
Internal: Chowdry(only)
THera
Function 5

1 EG supplies?
2 Does EG supplies to Fire pump?
3 Does EG suppies to Emergency bilge pump?
4 single phasing?
5 What are the voltage sections in your ship?
6 440 to 220 V, how?
7 where is step-up transformer used in ship?
8 Battery room entry, what is dangerous?
9 battery charging?
10 Trickly charging?
11 Does EG supplies to Emergency fire pump?
29/1/2015
Internal: Chowdry(only)
bara
Function 4b
1 how to maintain temperature in IG?
2 sample cooler?
3 fridge compressor high pressure, high temperature
4 Air starting line how to prevent explosion?
29/1/2015
Internal: Chowdry(only)
gyara
1 Your ship starts from kolkata river to chennai what will happen to your draft?
2 INDOS number
3 IG trips, Gas temperature, alarms?
Internal: Chowdry
External: Mani
das
Function3
1 Your duty engineer gives a call to you about oil traces around the ship when you are
on watch, what and all you will check as fourth engineer,?
2 As a cargo engineer you have to send 4 perosns inside cargo tank, what and all you will check?
3 Life boat checks- Tell about 5-way check?
4 free surface effect?
5 To reduce free surface effect using swash bulheads in a tank, what is the formula used?
6 IG, why it is used?
7 Does all you have cargo have the same flammable range?
8 IG gas temperature you maintain and how much alarm comes?
29/1/2015
Internal: Chowdry
External: Mani
aat
Function 3
1 certificates used on board?
2 inspect in carrier and tail shaft?
3 stability, metacentre?
4 low expansion foam, ration?
5 high expansion foam, ratio?
6 Annual survey fire fighting appliance, what and all you will check?

7 Rescue boat survey, what and all you will check?


8 In life boat survery, what and all you will check?
9 Document of compliance
10 angle of loll
11 ETA
12 ETA came into force?
13 Anchor chain, anchor explain in detail?
14 Procedure for emergency Towing appliance?
15 Types of bulkheads?
16 Those who don't know about bulkheads, how will you explain them?
17 Classes of bulkheads?
18 Emergency generator regulations?
19 Emergency generator starting?
20 IG when it is used? Why it is used?
21 what is plan range?
22 IF o2 content increases and decreases, what will happen in I.G?
23 In lifeboat, how will you navigate?
24 Purpose of SART?
25 SOLAS pack A, Solas Pack B?
29/1/2015
Internal: Chowdry
External: Mani
sath
Function 3
1 Annex 1 tell all complete regulations
2 What are all the annexes in your ship?
3 How the rudder in your ship?
4 Draw semi-balanced rudder?
5 Free fall lifeboat how will you launch?
6 How linear movement converted to rotary motion in rudder?
7 Fixed foam inspection?
8 Fixed Co2 inspection?
9 unknown person comes to your ship, what you will do?
10 Life boat-free fall in survery what and all you will check?
11 How revesing takes place in 4 stroke engine?
12 How do you do reversing in CPP? what is pitch?
13 Stern tube leak, what is your first action?
14 Stern tube tank level down, what you will do?
15 What is the use of bilge keel?
16 Why bilge keel is not used throughout the ship?
17 Centrifugal pump(fire pump) not taking suction?Why it is not taking?
18 Without opening centrifugal pump tell why it is not taking suction?
19 Oil water seaprator and purfier difference?
20 Why centrifugal pump is not used in OWS?
21 Oil mist detector alarm come, what and all you will do?
22 How check the Cpp propeller blade angle is correct? How will you check Practically?
23 Purfier cut section draw?
24 Ship cut-sectional view?
25 Life boat survery, what and all you will check?

29/1/2015
Internal: Chowdry
External: Mani
che
Function 3
1 What are the keys used in ship?
2 why propeller not fitted forward of ship?
3 Why rudder not fitted in forward of ship?
4 Annex 4 tell all the regulations?
5 Additional safety measures of bulk carriers?
6 Bulk carrier regulations?
7 Bulk carrier safeties?
8 Emergency generator regulations?
9 Fire pump regulations?
10 Co2 - weekly, monthly, yearly checks?
11 Co2 room entry checks?
Function 4b
1 Reversing of engine
2 Four stroke and two stroke differnece?
3 Exhaust temperature increases, what are the reasons?
4 What and all you will do in a watch as 4th engineer?
5 Chief engineer instructions for watch?
29/1/2015
Internal: Gopikrishnan
char
Function 4b
1 purifier desludging procedure?
2 Refrigerant lub oil properties?
3 Auxiliary engine trips?
4 Improved high lift safety valve diagram
29/1/2015
Internal: Gopikrishnan
Theen
Function 4b
1 PLAN full form
2 Indicator diagram formula
(area of the diagram/lenth of diagram)x (sensible scale N/m2)
3 Auxiliary engine trip
4 Types of indicator card?
5 Two stroke Start of injection-16 degree before TDC
End of injection - 20 degree after TDC
6 Two stroke valve timing diagram
7 Four stroke valve timing diagram
8 4 stroke
Injection begining-10degree before TDC
Injection Ending-12 degree after TDC
9 Cylinder lub oil properties?
TBN,high TBN value, should burn at high temperature, normal level

29/1/2015

Internal: Gopikrishnan
ak
Function 4b
1 Auxiliary engine trips
2 Viscosity index
3 Connecting rod ovality
Function 5
1 MSB safeties
2 Generator parallelling
3 Types of fues
4 Fuse construction
5 Reverse power trip
Function 3
1 Dcp fire extinguisher
2 Annex 1 discharge criteria
3 Safeties in IG System
4 Types of bulkhead?
5 Collision bulkhead?
6 Annex 1 criteria and downcomers?
7 Tell me about annex 1
28/1/2015
External:Siva Narayanan
Internal:Gopikrishnan
char
Function 4b
1 bOOster pump cross sectional view?
2 booster pump relief valve show in diagram? location?
3 Fuel oil system mixing column?
4 crane safe working load?
5 main engine how many relief valve is there?
6 how long will you take crank case inspection in your engine?
7 crankcase inspection regulation?
8 free board?
9 If you dont see freeboard in your ship, what does it mean?
10 piston weight
11 liner weight?
12 Anchor weight?
13 Why no spare anchor in your ship?
14 Fuel oil system diagram?
15 piston overhaul?
16 mixing column vent arrangement?
17 Fuel injector
18 Fuel injector pressure?
19 how will you releive the pressure in fuel injector?
Function 3
1 Navigational lighting significance?
2 crankcase regulation for crankcase inspection?
3 gangway checks?
4 gangway distance?

5 what is medical fitness certificate?


6 What is lenght overall elgible for?
7 when you will first lay of keel of the ship?
8 Expansion ratio of CO2 how will you find out?
9 hypermist and co2 difference?
10 how many extinguishers in your ship?
11 In engine room how many extinguishers are there?
12 latest regulation for entering the crankcase?
13 how to find whether 85% Co2 is released!
14 constructional difference in cylinder body of co2,foa,dcp. (no regulations,no shape,no Zn coating..only
about internal structure he wants to know
Function 5
1 main circuit breaker what and all you will check and you will carry out?
2 main switcb board diagram? where and all distribution will go?
3 MCb fault, how will find out?
4 Tube light - 220 or 110?
5 synchronising what and all you will do?
6 alternato checks what and all you will do?
7 Motor if there is some overload, how will you find out the overload?
safety
co2 maintenance
leading and trailing edge of propeller
factor on which frictional resistace of hull depends.
what LCF and its value
bilge keel arrangement
formula for TPC is it constant or change
External : Mani
Internal : choudry
fun 3
lnspection inside lifeboats
Ig system xplain
tailshaft inspection
fire fighting appliances inpection for surveys
metacentric height xplain
angle of loll
bulkhead purposes
class a,b,c Bulkhead
doc
certificates onboard
emerg.gen. Regulations
cleared fun 3
date: 23/1/2015
applied: 4B
surveyor.
internal: gopinath sir,
external: ganapathy sir

1,Type of ship and engine,


2,How long will take to remove ur cylinder head and how much weight,
3,Lifting tool of cylinder head and how will u select that,
4,Types of scavenging and which is most efficient,
5,How will find out that which is cylinder lube oil of ur engine,and property,
6,Controllable pitch propeller working and dis advantage,
7,What seal is used in your engine stern tube and how many tank of header tank and capacity,
8,Aux. Engine safety,
9,Over speed trip working mechanism,
10,How will you select exhaust valve,
11,Turbo charger lubrication,
12,Types of boiler safety valve,
13,Draw improved high lift valve and safety in that,
14,How is lubrication on your ship for cylinder liner,
15,Important spare inventory for your engine,
16, checks on cylinder head,
17,why two valves on cylinder head for inlet and exhaust,
18,If both valve open what is that,
19,purpose of rotocap, 20,What is your engine speed and Propeller speed,
21,How will reduce engine speed and Reduction gear ratio?
FUN4B:
MAIN ENGINE SPECIFICATION?
CYLINDER HEAD CHECKS WHILE RUNNING?
HOW RELIEF V/V IN MAIN ENGINE?
INJECTER PRESSURE HOW MUCH WHILE INJECTION?
AND SOME CROSS QUESTIONS
FUN 5:
ALTERNATOR SPECIFICATION ?
HOW U WILL PARALLEL U R GENERATOR?
NAME PLATE DETAILS IN ALTERNATOR?
BATTERY HOW U WILL CHARGE?
WHATS IS EMCY ESCAPE?CROSS QUS
HOW MANY SMOKE DETECTORS IN U R ENGINE ROOM?
MEGGER HOW U WILL CHECK ?
HOW U WIL CHECK INSULATION?
AND OHMS LAW?WITH CROSS QUESTION?
SOME BASIC QU28/1/2015
External:Siva Narayanan
Internal:Gopikrishnan
che
Function 4b
1 how many relief valves in your engine?
2 main engine specification
3 alternator specifciation?
4 cylinder head relief valve?
5 What is twin screw in engine?
6 What type of coolin in 4 stroke engine?

Function3
1 In emergency escape route, what and all will be there?
2 Dead weight of your ship?
Function 5
1 Type of emeregency supplies in your ship?
2 how many generators, specification and rating?
3 how will you charge the battery?
4 trickle charging?
5 Why you give trickle charging?
6 megger working?
7 how will you test the megger before starting?
8 Insulation resistance checking in motor?
9 ohm's law?
10 Where and all you will use Ohm's law??
11 Which and all circuit Ohm's law is applicable?
( in linear circuit it is applicable and in non-linear circuit it is not applicable
ESTIONS
28/1/2015
Internal:Gopikrishnan
du
Function 3
1 ISM
2 ISPS
3 Stability?
4 What is metacentre?
5 What are policies in you will follow in ISM?
6 Addtional safety measures of bulk carriers?
7 Single side skin?
8 double skin?
9 contents of DCP?
10 How foam system working in your ship? how it is working?
Function 5
1 Nickel cadmium battery specific gravity?
2 Where and all you will use Nickel cadmium batteries?
3 What is current tranformer?
4 What is wound motor?
5 what is squirrel cage motor?
6 preferential trip?
7 induction motor principle?
8 Difference between induction motor and synchronous motor?
Function 4b
1 Tie rod calculation?
2 How will you check the guide shoes of the crosshead?
3 How will you check the con rod ovality?
4 Maximum allowable value of a con rod?
5 crankcase inspection?
Function 6
1 Why do you adjust the height of the purfier?

2 What is operating water?


3 opening water in purifier?
4 why opening water pressure is more, how it is working and at what pressure?
5 what are the reasons for purfier vibration?
6 Heleshaw pump?

das
Function 3
1 scupper , how do they drain?
2 what is the purpose of scupper?
3 IOPP equipments?
4 Enclosed space entry procedure?
5 What are all enclosed spaces in your ship?
6 Freeing port?
7 Length overall value?
8 Length between perpendicular value?
9 How does the bow thruster works with respect to propeller?
Function 4b
1 Relief valve?
2 48 hours before reaching port your second engineer asks you for piston overhaul,
what and all you will do?
3 crane safeties?
4 SWL of crane?
28/1/2015
External:Siva Narayanan
Internal:Gopikrishnan
nau
Funtion 3
1 In liferaft, what and all you will see?
2 Enclosed space entry?
3 SWL of engine room crane?
4 hypermist and sprinkler difference?
Function 4b
1 Exhaust valve working?
2 number of relief valves in main engine?
3 fuel injector overhauling?
4 Types of lubrication? External:Siva Narayanan
Internal:Gopikrishnan
sath
Function 3
1 length overall value?
2 length between perpendicular value?
3 sprinkler and hypermist difference?
4 In deck what fire fighting sytem is used?
5 In deck, how will you fight fire?
6 freeboard? freeboard purpose?
7 IF you dont find any freeboard in a ship, what you will find out?

Fucntion 4b
1 types of condensers in your ship, which is efficient?
2 how IG generator workis?
3 Main generator amps, voltage?
4 emergency generator amps, volts?
5 What are all the relief valves present in main engine?
6 HP, HT?
7 HP fuel line protection?
8 how many air compressors?
9 air compressor safeties?
10 Boiler -EGB process?
11 while passing through EGB, exhaust gas temperature?

28/1/2015
External:Siva Narayanan
Internal:Gopikrishnan
nau
Funtion 3
1 In liferaft, what and all you will see?
2 Enclosed space entry?
3 SWL of engine room crane?
4 hypermist and sprinkler difference?
Function 4b
1 Exhaust valve working?
2 number of relief valves in main engine?
3 fuel injector overhauling?
4 Types of lubrication?
28/1/2015
External:Siva Narayanan
Internal:Gopikrishnan
sath
Function 3
1 length overall value?
2 length between perpendicular value?
3 sprinkler and hypermist difference?
4 In deck what fire fighting sytem is used?
5 In deck, how will you fight fire?
6 freeboard? freeboard purpose?
7 IF you dont find any freeboard in a ship, what you will find out?
Fucntion 4b
1 types of condensers in your ship, which is efficient?
2 how IG generator workis?
3 Main generator amps, voltage?
4 emergency generator amps, volts?
5 What are all the relief valves present in main engine?
6 HP, HT?
7 HP fuel line protection?

8 how many air compressors?


9 air compressor safeties?
10 Boiler -EGB process?
11 while passing through EGB, exhaust gas temperature?
28/1/2015
External:Siva Narayanan
Internal:Gopikrishnan
panch
Function 3
1 Engien room how much CO2 bottles you will have?
2 how much co2 bottle for cargo hold?
3 befor entering battery room, what and all safety you will follow?
4 Enclosed space entry procedure?
5 free board purpose?
6 how many quick closing valves in your ship?
Function 5
1 what is the use of transformer?
2 how many emergency generator on board?
3 IF battery fully charged, how to put trickle charging?
how much trickle charging volts?
Function 4b
1 Types of scavenging?
2 how many cranes in your ship?
3 how many turbochargers?
4 how does cooling happen in turbocharger bearing?
5 Fuel oil temperature?
6 Fuel oil line how much relief valve is there?
7 exhaust temperature?
8 Turboacharger inlet temperature, turbocharger cooling?
9 Uniflow scavenging diagram?
28/1/2015
Internal:Gopikrishnan
Theen
Function 3
1 Enclosed space entry procedure?
checklist, ventillation
2 how will you extinguish if fire in cargo hold?
3 ISPS?
4 how will you find out the co2 has flooded the cargo hold?
how will you find out the entire Co2 bottles is used? how will you find out?
Function 4b
1 Bearing load where and all it is acting?
2 MGPS how much volt at sea, at shore
3 shell and tube heat exchager end covers opening, prechecks befor opening, opening
procedure,

and what and all you will check inside?


4 Sea water pipe line material?
Function 5
1 Alternator safeties?
2 Reverse current trip?
3 Reverse power trips?
4 difference between reverse power trip and reverse current trip?
5 Alternator side , what and all maintenace you will do?
6 Trips in alternator?
7 Trips in MSB?
8 ESB, where and all power supply goes?
28/1/2015
Internal:Gopikrishnan
ak
Function 3
1 Additional safety measures of bulk carriers?
2 How the Co2 bottles have linked together mechanical linkage?
3 co2 2 year inspection?
4 Types of floors?
5 Sox emission rate outside special area, ECA area?
6
Function4b
1 Crankcase inspection
2 firing order?
3 auxiliary engine safeties?
4 Fuel pump types?
5 OMD where which type of engine it is used?
6 MCR
7 Your ship MCR?
8 What MCR do you run your ship?
9 Why you run at below MCR?
10 power calculation for your engine?
how will you calculate the area?
11 crankcase relief valve opening pressure?
12 BHP?
13 IHP?
Function 5
1 ESB supplies equipments?
2 RMS value?
3 Steering gear motor safeties?
4 Thyristor where it is used, why it is used?
Function 6
1 auxiliary engine safeties
2 auxiliary engien lubrication
3 Types of bearing in auxiliary engine?

4 axial play of connecting rod?


5 Gland packing materil?
6 carbon material- mechanical seal?
Hi friends, those who feel they dont want to reveal the identity to others and would like to help
your others friends, can email your questions to questionschennai@gmail.com, and I will post
your questions in Fb without your identity.Pleas dont forget your cross questions, it will be very
useful for everone of us, Thanks ind advance.
Date: 27/1/15
External: siva narayanan
Fn:3
Transam space
Sopep
How will u prevent sopep
Use of welden pump
Fn:4b&6
Air bottle safety
What r all over hauling made in ur ship
What type of gears used in purifier
Decarburising of cylinder head
How offen u will decarburise ur main engine cylinders
Fire on engine room wat will happen to air bottle
Types of stearring gear
27/01/2015
External: siva narayanan
Internal: Chowdry
theen
Function 3
1 What are all the annexes in you ship?
2 Aspect ration?
3 types of rudder?
4 annex 1, annex 6
5 plastic, what you will do in ship?
Function 5
1 Types of fuses?
2 Battery maintenacne?
3 paralleling method?
Function 4b
1 tappet clearance?
2 crankcase inspection?
3 PMS
4 decarb how many hours once?
5 Fuel pump zero, how will you identify?
How to find the co2 fully released to the cargo hold?
how will you find volume of cargo space?

23/1/2015
Internal: chowdry
External:
panch
Function 3
1 types of rudder
2 isps
3 chemical reaction of chemical foam reaction
4 draw sprinkler system complete diagram?
27/01/2015
External: siva narayanan
Internal: Chowdry
Function 3
Introduce your self
1 what is special areas?
2 Dock plan?
3 Line plan?
4 shell expansion plan?
5 Inclination experiment?
6 Difference between old and new STCW certificates?
7 How many bearing are there in rudder and location?
8 What is Breast hook and location?
27/01/2015
External: siva narayanan
Internal: Chowdry
char
Function 4b
1 MAN B&W full form
2 PMS
3 SMS
4 decarb maine engine
Function 5
1 MSB safeties?
2 preferential trip sequence?
3 Types of motor and uses?
4 Types of fuses?
Function 6
1 Tappet clearance?
2 crankcase inspection?
3 TOp overhauling?
4 Intercooler functions?
23/1/2015
Internal: Gopikrishnan
External: Ganapathy
sath

Function 3
1 length overall purpose
2 lenght between perpendicular purpose
3 cargo tank fitness certification for loading?
4 foam extinguisher refilling procedure?
5 types of extinguisher in engin room?
6 what are annexes
7 sewage treatment plant?
8 stp how much fans?
9 how many comressors?
10 gear pump where will be relief valve?
11 in air compressors, why intercooler and after cooler?
12 in boiler furnace temperature?
13 what is enclosed spaces in engine room?
14 what is encloased space?
Function 6
1 IG safeties?
2 types of coolers in engine room
3 types of fire
4 in engine room, what class of fire?
5 purifier types, how many?
6 incinerator starting procedure?
7 how to clean ows?
27/01/2015
External: siva narayanan
Internal: Chowdry
aat
Function 3
1 Aspect ration
2 Types of rudder?
3 Line plan?
4 shell expansion plan?
5 bulwark?
6 Freeing port?
7 MLC 2006
8 how to find out the list?
9 Special area?
10 marpol annexes?
11 NOx, Sox
23/1/2015
Internal: Chowdry
external: fer
thera
Function 4b
1 what and all overhaul done in your engine

2 how much turbocharger in v engine?


3 what is the engine speed?
4 cylinder head weight?
5 how many valve in one unit?
6 CPP?
7 lip seal?
8 no engine room crane? how change chain block?
9 for cylinder head how much chain block you use?
10 rotocap purpose?
11 cpp disadvantage?
12 how you choose exhaust in 4 stroke V type engine?
13 what are all the trips in you main engine?
14 how will you draw the crankcase lube oil for your main engine?
15 turbocharger cooling?
16 cylinder jacket cooling?
17 turbocharger lubrications?
18 stern tube header tank capacity?(60litres)
19 main engine inventory?
20 what is the important in inventory?
21 auxiliary engine trips?
22 accumulator pressure test for water tube?
23 overspeed trip mechanism?
24 types of safety valve?
25 draw improved high lift safety valve?
27/01/2015
External: siva narayanan
Internal: Chowdry
sath
Function 5
1 Circuit breaker safeties?
2 Reverse current trip not working,how will you rectify?
3 Motor where and all it will used?
4 Earth fault?
5 Types of wire?
Function 6
1 In centrifugal pump discharge valve closed, what will happen?
2 Principle of centrifugal pump?
3 Fuel injector overhauling
4 Reciprocating pump discharge valve closed, what will happen?
5 Types of heat exchager?
6 Types of fuel pump?
7 What type of fuel pump is used in your engine?
Function 3
1 TPC
2 TYpes of steering gear?

27/01/2015
External: siva narayanan
Internal: Chowdry
che
Function 3
1 Transom space
2 SOPEP?
3 Weldon pump?
Function 4b
1 Types of steering gear?
2 Piston rings calibrations
Function 6
1 Intercooler function
2 in purfier gear arrangement?
3 Air bottle safeties?
27/01/2015
External: siva narayanan
Internal: Chowdry
panch
4b
1 Top overhauling
2 tappet clearnace?
3 Function of intercooler?
4 De-carbonising?
5 PMS and SMS?
27/01/2015
External: siva narayanan
Internal: Chowdry
du
Function 6
1 Tappet clearance
2 maine engine crankcase inspection?
3 water leakage in lube oil, how will you find out when engine stopped?
4 propeller clearance?
5 types of rudder?
6 types of stress?
7 Define rudder?
Functon 3
1 weldon pump, where it is used?
2 Why weldon pump is used instead of normal pump?
3 weldon pump types?
4 SOPEP locker what and all there?
5 where and all weldon pump is used?
6 Weldon pump operation?
7 Aspect ration?

January 27 at 11:36pm

27/01/2015
External: siva narayanan
Internal: Chowdry
ak
Function 5
1 Types of motor used in ship?
2 What is transformer?
3 What are the transformer used on board?
4 What is current transformer, voltage transformer and autotransformer?
where it is used?
5 Suppose if fire in main swithcboard in one generator panel, how will you isolated that?
6 steering gear motor safeties?
7 Dol, star-deltage advantages difference?
8 parallelling of generator?
9 Types of methods of parallelling of generators?
10 Earth fault indicator? how will you find the earth fault?
11 Msb safeties?
Function 4b
1 Scavenge fire?
2 If scavenge fire in one unit what are the symptoms?
3 During main engine decarb, what are the readings you will take?
4 Turbocharger parts?
5 Turbocharger surging?
6 How will you cut off fuel for one unit?
Function 6
1 Decarb of auxiliary engine generator?
2 tappet clearance?
3 crankcase inspection?
4 butt clearance?
Reedy and Gopi sir
16/1/2015
Fun 3
Dead weight Plimsel marking y its named pilmsel
Light weight
Grt nrt
How to calculate nrt
Wat s ship earning capacity
Marpol annex
Sox value
Ship stability
Stress acting in ship
Transverse bulkhead use
Wat is list
Inclining experiment

How to know list?


Dynamic and static stress
Collision bulk head location
Types of rudder
4b
Started with engine specification
2 stroke 4 stroke difference
2 stroke piston parts
Wat is tbn
Allowable liner wear in 2 stroke engine
Wen will u change liner for ur engine
Tappet clearance
But clearance
Wer will be liner wear high and y?
Blow down
Gauge blow through
2 stroke engine piston part
Boiler water test
Gopi sir
Co2 weekly routines
January 27 at 11:34pm

23/1/2015
Internal: Chowdry
External: fer
chowda
Function 4b
1 purifier gravity disc and all procedure in details?
2 what is the use of friction clutch?why it is used in purifier?
3 where bowl is placed in purifier?
4 air compressor safeties?
5 Why bursting disc is used and purpose, where it is located?
6 Refer compressor safeties on compressor?
7 Explain about thermostatic expansion valve?
8 What is the action when HP cut out takes place?
9 What happens if the moisture contains in the refrigerant?
10 What is superheat?
11 In four stroke engine, how many piston rings are placed? what are the rings?
12 How lubrication takes place?
13 What is stuffing box?
14 what are all the things placed in stuffing box?
15 What are the rings in stuffing box and where it is placed,exact location?
16 What are all the checks you are doing in propeller?
17 Propeller drop how you will find?
18 What are all the checks in centrifugal pump?
19 How will you check the bering is proper or not in centrifugal pump?

20 How will you check the alignment of centrifugal pump shaft?


21 what are all the things you will check in gland packing?
22 Working of fresh water generator principle?
23 boiler mountings?
24 what are all the test in boiler?
25 cylinder lub oil analysis?
26 what are the tests in boiler?
27 If you dont do boiler test what will happen?
28 IF chloride content is high, what is the action?
29 what are mountings in cylinder head?
23/1/2015
Internal: Chowdry
external: fer
bara
Function 4b
1 oil water separator?
2 FWG how vacuum created?
3 FWG principle?
4 Ejector pump pressure?
5 how much amount of fresh water produce?
6 gudgeon pin lubrication?
7 Gudgeon pin where it is located and connected?
8 Fuel injector pressure?
9 oil water separator pump?
10 steam lines where and all it is process in OWS?
11 how many filters in Ows?
12 Cylinder head mountings?
13 fuel injector pressure?
14 Bursting disc where and all present in air starting system?
23/1/2015
Internal: Chowdry
external: fer
Gyara
Function 4b
1 RT-flex engine
2 common rail
3 how reversing done in RT-flex?
4 Cylinder head mounting?
5 Fuel oil pressure?
6 Fuel valve working pressure?
7 What is the use of gagging tool?
8 Boiler water test?
9 use of boiler water treatment?
10 fish room, meat room temperature?
11 back pressure valve uses in refer?

12 defrosting method?
13 defrosting
23/1/2015
Internal: Chowdry
external: fer
das
Function 3
1 In G system cam position?
2 Why inerting your tank?
3 pv valve? pv breaker?
4 deck seal purpolse?
5 why two deck seal or why two non-return valve is kept?
6 pump room safeties?
7 pump room entry?
8 slop tank where it is located?
9 shear purpose?
10 why it is called green sea?
11 Why the name came as green sea?
12 Double bottom or double hull in your ship?
13 Why double bottom and where is your ship built?
Function 4b
1 types of scavenging?
2 purifier and clarifier difference?
3 why gravity disc is used?
4 sulzer engine type
5 oil mist detector type?
6 crankcase relief valve door?
7 Omd alarm? what you will do?
8 fuel injector purpose, lifting procedure?
9 how many fuel injector in your cylinder? why two?
10 Emergency steering gear how to operate?
11 scavenging types?
12 why uniflow scavenging?
13 why crosshead is given?
14 Intermediate bearing material?
15 Intermediate bearing lub oil supply?how it is coming
16 Thrust block purpose?
Function 6
1 Tappet clearance?
2 before cylinder head overhaul, what are the checks?
3 After cylinder head overhaul, what are the checks?
4 how will you lap the valve and how will ensure valve is not leaking?
5 Dry dock purpose?
23/1/2015
Internal: Chowdry

External: Fre
nau
Function 3
1 certificates in ism
2 certificates in isps
3 why you do dry docking?
4 what is shear
5 what is flare?
6 propeller drop?
23/1/2015
Internal: Chowdry
External: Fre
aat
Function 6
1 engine model
2 ows operation
3 sewage treatment plant type?
4 why blower is there in STP?
5 how many blowers in STP?
6 Incinerator starting?
7 How many no. of air compressors?
8 types of air compressors?
9 intercooler, aftercooler?
10 pump types? types of pump used in engine room,where and all did you use?
11 type of purifier
12 ALCAP purifier, working priciple?
13 Draw water transducer line in purifier?
14 boiler safety valve easing gear purpose?
15 safety valve what it is releasing pressure, where is the pressure is going from the safety
valve?
16 why heat exchager are used?
17 what is heat exchager?
18 Is heat exchager a cooler?
Function 3
1 length overall?
2 lbp?
3 gangway checks?
4 what is enclosed space?
5 engine room what type of extinguisher used?
Function 5
1 purifer trip?
2 generator paralleling
3 emergency battery maintenance?
4 emergency supplies?
5 types of transformer used in ship?
6 difference between auto transformer and normal transformer?

23/1/2015
Internal: Gopikrishnan
External: Ganapathy
che
Function 4b
1 engine type
2 reversing of engine
3 how distributor reverses?
4 draw starting air system along with safeties
5 auxiliary engine safeties
6 starting air line safeties?
7 engine room crane,what and all you will test?
8 engine room crane wire greasing?what type of greasing in engine room crane?
9 what type of overhaul in main engine?
10 piston checks?
11 exhaust valve weight?
12 one unit weight of engine?
13 auxiliary engine safeties?
14 crane , how it is working?
15 annual inspection of engine room crane?
16 engine room crane safe working load?
17 why only 3 tonne safe working load?
18 in main engine what and all relief valve is there?
Function 5
1 transformer diagram and explain?
2 where you will connect voltmeter?
3 emergency supplies?
4 battery room checks?
5 battery room floor checks?
6 emergency generator starting?
7 main circuit breaker safeties?
8 preferential trip?
9 how transformer cooled?
(solas regulation: transformer air cooled only)
10 safe working load
maximum amount of load that can be lifted without any risk of accident.
11 if ballast tank is kept empty for a long time without painting, the hydrogen sulphide will convert
to sulphur oxide
23/1/2015
Internal: Gopikrishnan
External:
char
Function 3
1 types of fire
2 dcp maintenace
3 sprikler system

4 composition of dcp
5 electrical fire which type of extinguisher you will use?
6 how does pressure increases in Co2 bottle?
Function 4b
1 types of engine maker?
2 main engine lube oil flow diagram
3 starting air line explosion
4 what is reverse osmosis?
5 safeties of intercooler
6 air starting line safeties?
23/1/2015
Internal: chowdry
External:
theen
Function 4b
1 now cross head lubrication in sulzer engine?
2 safeties in bulk carrier?
3 draw fixed co2 system?
4 if your engine room is flooding with water, what is your action, water is going overboard or
inside?
5 air compressor safeties, trips?
6 water is not coming it will trip or not in air compressor?
7 cross head lubrication in main engine?
Function 3
1 hatch coaming
2 green sea
3 sealing in hatch cover and sealing in hatch coaming
23/1/2015
Internal: Chowdry
External:
Du
Function 3
1 coffer dam? significance and draw coffer dam from transverse side, front view?
2 portable fire extinguisher?
3 types of fire extinguisher?
4 difference between chemical foam and mechanical foam
5 fire in the table, what you will do?
answer: I will go back and make sure the distance is such that, it makes
a projectile action and reaches the surface of the fire gradually and covers the surface.
6 annex 5 garbage can be thrown overboard?
7 if You sailed in bulk carrier, what are the garbages which can be thrown overboard from bulk
carrier?
8 annex 6 so valve current outside special area 3.5%, eca area 0.1%

23/1/2015
Internal: Gopikrishan
External:
ak
Function 3
1 co2 room safeties
2 additional safeties of bulk carriers
3 types of floors
4 inclining experiment
5 solid floor
6 bracket floor
7 isps
8 ism
9 ism policy of your ship
Function 4b
1 auxiliary engine safeties
2 air compressor what compression cycle?
3 cylinder lub oil properties?
4 Demulsipity
5 emulsify
23-1-15
Internal - Gopi sir
External- ganapathy sir
Func 4b & 5
First Gopi took
1. Type of engine
2. MCC stands for??
3. How reversing takes place?
4. How air distributor s changing during reversing?
5. Draw starting air system?
6. A/e safeties?
Then external
1. Air starting safeties
2.purpose of drain vv in de air starting system?
3.how water s coming?
4. When relief vv lift in de tat system?
5. If relief vv doesn't lift wat happened?
6. ME single unit weight?
7.exhaust vv weight?
8. Cylinder head weight?
9. have u done any overhaul in ME?
10. Checks in piston overhauling?
11. Y v need clearance in piston grooves?
12. If clearance less wat happens?
13.where r de relief vv in main engine?

14. Wat & u ll inspect in overhead crane?


15. Swl of ur er crane?
16. How er crane working? Moving?
17.er crane annual inspection & certificates?
18.a/e safeties?
19. Hot filters cleaning procedures?
Fn5
1. Paralleling conditions?
2. Emergency supplies?
3. In de time of black out how do u reach de emergency exit
4.transformer diagram?
5. Types of transformer? Diagram
6. Auto transformer working? Diagram?
7. Main circuit breaker safeties?
8. Insulation resistance checking?
9.low insulation alarm came. How do u identify which machinery?
He s not accepting de switch each machinery shutting off & on.
10. How transformer cooled? Onboard which 1 u had?
11.battery room inspection
12.wat u inspect on battery room on floor?
13.ppe for battery room?
14. Types of starting of EGenerator?
At last Alhamdhuillah he gave me both functions
23.01.2015
Surveyor: Mr.Chowdry
Func 3:
1.What is Cofferdam
2.Where it is present in your ship?
3.Draw the Cofferdam...I have drawn in top view but he told to me draw in Transverse Direction .
4.What is the Significance of it
5.What is Bulbous bow?
6.What is the Significance of it and what is Wave Making Resistance.
7.Types of Portable Fire Extinguisher in your Ship
8. Difference between Chemical Foam and Mechanical foam
9.If there is a liquid fire on surface where no vertical bulkhead present nearby what is your
action?
10.What is Annex V
11.What are the Garbage you can throw overboard from Bulk Carrier?
12.What is Annex VI?
13.What is the Regulation on SOx?
28/1/2015
External:Siva Narayanan
Internal:Gopikrishnan
das
Function 3

1 scupper , how do they drain?


2 what is the purpose of scupper?
3 IOPP equipments?
4 Enclosed space entry procedure?
5 What are all enclosed spaces in your ship?
6 Freeing port?
7 Length overall value?
8 Length between perpendicular value?
9 How does the bow thruster works with respect to propeller?
Function 4b
1 Relief valve?
2 48 hours before reaching port your second engineer asks you for piston overhaul,
what and all you will do?
3 crane safeties?
4 SWL of crane? Attempt-3
Date-09/jan/2015
surveyor- Mr.Choudary
Fun- 4b.. (Coc Funtion)
Result- cleared Class 4.
which company you sailed, which type of vessel, written s all clear?
1. M/E Specification
2. why do we do shaft earthing, how is it done? what is spark erosion.
3.explain about start air line explosion, how is the fire triangle getting completed there.. How to identify that
air start valve is leaking ? tell any method how do cum to know weather the valve is leaking during your
watch ---tell me any method other than paint color change method,
& tell how do you avoid starting air line explosion ?
4.Type of Aux Engine , what is Jet Air system, explain about it.?
which type of controller used, from where is the air coming, and what is the pressure of it.
5.what is the TBN ?why is it required, what is the value of main engine cylinder oil and why?
what is the TBN value of M/E crankcase oil , Tbn value of 4 stroke engine crankcase oil ?
6.what is powercard diagram, draw and show power card diagram with indicating afterburning in it..
Choudary Sir Said, ok now you can go..
Me:- Siiiir ....
Choudary SIr:- Go go, you ve cleared your class four..
Me-- Thank you soo Much sir..
fun 4b:
Type of ship, Engine specification
How reversing takes place in your (B&W) engine? cross qns
Lubrication in your engine?
How cross head bearing builds up pressure for piston cooling?
Hydrodynamic lubrication?
Exhaust valve working?
Working of VIT?
Main engine safeties?
OMD working? If alarm comes what is ur action?
SFOC?
Boiler water treatment?

fun 6:
List of machineries you overhauled?
Overhauling of centrifugal pump?
Air compressor v/v parts for suction and discharge?
How will you differentiate suction and discharge valve?
How do you know relief valve lifted or not?
Lubrication in Air Compressor?
Tappet clearance?
Location of thrust bearing in A/E?
Purpose of paring disc in Purifier?
Got fun 4b.
19/01/2015 attempt 2 functions :4b n 6
External:Mr.Gopinath(HIMT) internal :Mr.gopi krishnan
1. What type of ship
2. What is ur main engine type, specification?
3.wat time is clo injected in ur cylinder in main engine and why?
4. Explain rtflex working in detail? Cross questions everywhere
5. Why ur common rail pressure is between 600-900 bar?
6. What is ur injection pr.... Is injection pr and fuel injector opening pr same... Define injection pr.. Cross
questions
7. Cross questions from ICU unit of rtflex.
8. Whats the TBN value of ur main engine clo and Wats de diff bet aux engine crankcase lub oil and me
crankcase lo??
9.how is crosshead lubricated.. Wats the purpose of higher pr.. Crosshead related cross questions
10. What do you mean by articulated pipe.
11. Types of bearing you know and it's application in your ships.
12. Where is thrust bearing located in your alternator n in wat way it is different from other bearings.
13. How thrust bearing functions in your auxiliary engine
14. In rtflex from where does the servo oil recieves oil.
15. What is antipolishing ring what's it's purpose?
16. Main engine alarms and auto shutdown trips
17. What is cloverleafing, reasons for it??
N few more questions
22/01/15
Internal : Choudry, External : Unnikrishnan
Fun 3,
Type of ship sailed,
why has separetion given for tanks,
Free Surface Effect,
PV Breaker,
Deck main pr. And unit
Fun 4b,
Type of engine
How reversing happened in engine,
Firing order for Ahead nd Astern
Hw fuel pump works,

Hw will u knw air starting V/v is leaking, If leaks wat happen and wat is ur action,
Air line safeties,
VIT, and its control the fuel
And cleared Fun 4b

Date: 22/1/15
Attempt 2
All functions
Internal: Gopi. No external.
Fn 3
What type of ship
What questions did you get in the previous attempt?
What are the classes of fire?
What extinguishers will you use for the above fires?
What are the types of floors?
Where are solid floors used?
What are the cert under isps?
Sox and nox regulations
Fn 4b,6
Purifier manual discharge
A/e alarms, safeties and trips
How do you test crankcase relief door?
What is the cycle in air compressor?
Air compr safeties
What is compression ratio wrt air compr?
Why interstage coolers are provided?
What is the advantage of having an interstage cooler in an air compr?
Fn 5
Msb safeties
Types of fuses
Types of transformers
What is an instrument transformer, where is it used. Safety in instrument transformer.
Generator safeties
Motor safeties
Draw star delta starter
He saw the circuit diagram and told me to explain it. Cross questions like why it is used, where it is used
What happens if motor continues to run in star.
Result: got function 5.
23/01/2014
Internal: chowdhary sir
Hatch coaming
What is sealings bw hatch and coaming
Green sea? How to prevent green sea?

Additional safety in bulk carrier? Wen u see cargo hold is flooded whar is your next step? How to pumping
out?
If engine room is flooded what system is there? Where will you dischare this flooded water?
Co2 system draw diagram and xplain all, ? how many c02 bottles ? frmula to count co2 bottles?
FN 4b
Engine specification
Difine bore and stroke, bore ratio
How many lubrication pump for ME? How crosshead is lubricated? After lubricated where oil is going?
Air compressor safeties? Trips? Cross questin
Result - frown emoticon

internal: chowdhary
1. tanversverse metacentre.
2. sprinkler system diagram wit explanation.
3.types of extinguiser
4. types of foam extinguiser.(meachanical & chemical)
5. wt is the difference between dem.
6. write the chemical equation.
7. isps complete.
8. annex 1
9. types of rudder n difference
10. draw dcp extinguiser.
21/1/2015
external: ganapathy
internal: gopikrishnan
2nd person
Function3
1 dynamic position, how do you achieve dynamic position?
2 difference between dp2, dp3,
3 bow thrusters?
4 auxiliary thrusters?
5 auxiliary engine for propelling how?
6 classes of fire extinguishers?
7 fixed fire fighting sytem on board?
8 accomodation, which type?
9 why cant hypermist?
10 enclosed spaces in engine room?
function 5
1 insulation in motor? how to test?
2 how to take insultion in circuit?(with diagram)
3 battery room inspection?
4 paralleling of generators outsided engine room?
5 what is the maximum load on engine

21/1/2015
external: ganapathy
internal: chidambaram
5th person
function 3
1 type of ship
2 high/low expanion foam
3 co2 fixed fire fighting system
4 hi fog vs co2 system
5 fire detectors
6 relief valve in fire line
7 relief valve in fire line where it is located?
8 how many relief valves are there in fire line?
function 6
1 emergency air compressor how to start
2 main air compressor safeties
3 reciprocating pump overhaul
4 centrifugal pump overhaul?

External only no internal


How anchor lowered?
Windlass safeties?
How anchor secured in ur ship.
Wt is bitter end? Hw to operate it?
Wt r the marking in ur cargohandling crane (my ship container ship)
ORB enteries part I lot of cross question
Annex 1 discharge criteria for engine room bilges
Reentry procedure in e/r after extinguishing fire

21/1/2015
external: ganapathy
internal: chidambaram
7th person
funtion 3
1 lbp
2 what all you will tests in dcp?
3 checks in dcp?
4 high fog system?
5 engine room fire fighting
FM200-fire fighting
6 chemical name of fire fighting of fme200?
answer heptafluropropane
7 six bottle in engine room, passenger ship how many life raft?
8 life boat checks?
9 life raft capacity in passenger ship?
10 dcp bottle corrode, what you will check?
11 co2 and high fog system difference?

12 enclosed space entry five points as it is in IMO?


(put answer friends)
function 5
1 emergency routines order wise?
2 lightning how?
3 auto transformer and lighting transformer difference?
4 how many number of batteries , how much voltage is producing?
5 paralling of generators?

21/1/2015
external: ganapathy
internal: chidambaram
8th person
Function3
1 how many anchors in your ship
2 do you have spare anchor?
3 what is the weight of the ancor?
4 scrubber usage?
5 what is fire fighting system on your ship?
6 low expansion foam
7 fixed fire fighting in your ship
8 what type of portable fire extinguishers used on board?
9 flare?
10 free board?
11 iopp oil spillage which tank you will store?
1 sludge tank
2 bilge tank
function 4b and 6
1 compressor safeties
2 maine engine how many relief valve is there
3 what type of purifier you have and what is the gravity disc number?
4 how many purifier is there
5 how will it reach interface
6 what type of boiler?
7 foam extinguisher?
8 sprinkler system?
9 oil water separator how will you start?
10 hydroclone force?
11 sewage treatment problem you will encounter?
12 vacuum type?
13 sludge holding, how much?
14 what type of pump in your vessel?
15 reciprocating pump relief valve it will be?
16 what is the use of chain locker?
17 Ig what and all gases are there?
function5
1 synchronising
2 emergency generator- where and all you will power supply?

3 emergency air compressor how will you start?


4 megger test?
5 before synchronising, how will you check?
21/1/2015
external: ganapathy
internal: chidambaram
student :Loganathan
6th person
function 3
1 enclosed space entry procedure?
2 free board?
3 length overall?
4 gangway safeties
5 fire in the engine control room door, you should not use co2 extinguisher?what you will do?
6 co2 alarm solas regulation?
7 enclosed space entry, in the space befor entry you will get 21%, what you will do and what you will
check?
4b
1 type of engine
2 cylinder head weight?answer check in manual, external told this answer
3 where and all relief valve fitted in main engine
4 crankcase safeties
5 one unit overhaul, how will you overhaul?
6 fuel injector testing procedure?
(first you should tell you should not harm or injury to other person)
7 air compressor manual starting procedure?
8 air compressor safeties/ trips?
9 procedure for cleaning cold filter in fuel oil system?
10 hfo specification in your ship
student told( 180-380cst, density-15degrees,991 kg/m3)
11 type of fuel used in your ship?
12 high pressure line leaking how will you know?
student told(1 leak of alarm, 2 rpm reduce, power reduce)
13 types of pumps
14 what is important significance in reciprocating pump?
15 starging procedure of recipocating pump?
16 why no relief valve in centrifugal pump?
function 6
1 stp? what type?
2 what is purpose of blower in stp?
3 if blower is not working in stp, what you will do?
4 ows type?
5 how many spare filter is there n ows?
6 starting procedure of incineartor?
7 enclosed space in machineries?
8 uptake fire, whatis your actiong?
Resut: cleared function 4b and 6
nternal: chidambaram
4th person

3
1 capacity of foam tank?
2 emergency generator capacity? rating?
how much section requirements
3 fixed fire fighting co2
4 fixed foam system
5 low expansion foam?
6 foam filling table?
7 extinguisher safeties?
8 what to wear while walking on deck on chemical tanker?
9 fire pump capacity?
10 emergency fire pump regulation?
4b
1 kind of engine
2 checks during scavenge fire?
3 scavenge fire extinguisher? co2 and steam
4 cylinder oil leakng, how will you know?
5 exhaust gas temperature?
6 a/e checks safeties? if how to find the hot spot in a crankcase?
5
1 in a circuit, where you will put voltmeter and ammeter?
2 why you take insulation test?
3 synchronising conditions?
4 what are the procedures we have to follow to do before testing insulation of a motor?
5 single phasing
function 6
1 types of pumps used in a ship?
2 overhauling of a reciprocating pump?
3 emergency air compressor starting methods?
4 air compressor safeties?
5 air intercooler purpose?
6 pressure and temperature before intercooler,after intercooler,
before after cooler, after aftercooler
7 sewage treatment plant is not working, what you will do?
8 types of heat exchagers? which is efficient?
9 boiler egb
21/1/2015
external: ganapathy
internal: gopikrishnan
3rd person
Function 4b
1 checks in mechanical foam?
2 main engine type?
3 fuel high pressure line?
4 sounding in e/r?
5 how to clean hot filter?
6 exhaust valve weights?
7 fuel injector pressure testing?
8 f/o density?

3
1 gangway safeties?
2 loa(purpose),
3 lbp
4 flare
5 freeing point?
6 scupper plug?
7 fixed fire fighting system?
8 mechanical foam
9 sprinkler
10 hypermist system
11 co2 room entry?
12 enclosed spaces in e/r?
13 sounding?
Like
9 people like this.

Write a comment...

Rakesh Parthasarathy
January 21 at 11:36pm

21/1/2015
external: ganapathy
internal: gopikrishnan
1st person
function 3
1 types of fire detector
2 types of nozzle
3 where you will use jet nozzle?
4 what are all extinguishers in engine room
5 fixed foam system?
6 what is air foam system?
7 how will you check the level?
8 what is low expansion foam?
9 how will you extinguish ratio of low expansion foam

10 gangway safeties?
11 flare?
12 free board
13 freeing point?
14 emergency fire pump pressure, inspection details?
4b
1 engine specification
2 waht is the weight of one unit of engine?
3 what is the weight of exhaust valve?
4 what is the safe working load of engine room crane and deck crane(cargo crane)?
5 boiler trips?
6 fuel pump type?
7 twin type fuel injector?
8 leak of for hight pressure fuel limits?
9 how is fuel controlled?
5
1 megger
2 type of transformer
3 difference between ordinary tranformer and auto transformer?
4 battery room safeties?
5 no of batteries
6 shore connection specifications?
12/1/2015
external: Chidambaram
Internal: Gopikrishnan
function3
1 Tpc
2 dcp maintenace and checks to be carried out
3 difference between sprikler and hypermist?
4 what is the capacity of breathing apparatus?
5 use of EEBD?
6 where is EEBD located?
7 is there any thing to refill the breathing apparatus on board?
8 fresh water allowance
9 what is gun wale?
10 a/e safeties?
11 rudder carrier bearing
12 how will you weigh the rudder?
13 rudder clearance?
14 what is free surface effect?
15 how will you reduce free surface effect?
Function 4b
1 how will you test wheather crankcase relief valve is opening at required pressure?
2 what are the types of revering an engine?
3 what is the use of stuffing box?

4 how will you check wheather stuffing box is working properly?


5 Where will the stuffing box drain oil go to which tank?
Result: Function 3 cleared

9th Jan
Attempt-2
Internal- gopi sir
Applied for 3, 4b & 6
Funct-3
1. difference between chemical tanker and oil tanker.
Only one question and jumped to nxt function.
Funct-4b
1. Working of starting air distributor.
2. Working of exhaust valve
3. Air starting valve leaking how to find.
4. Checks during starting ME if ur in cylinder head platform.
5. Safeties and trips of ME.
6. What is puncture valve.
7. How will you increase the speed of ME.
Funct-6
1. Location of gravity disk.
2. What happens if interface changes in purifier.
3. How will you charge the refrigerant in refrigeration system.
4. How will you find if there is leak in refer system.
5. What are the cutouts in refer system.
6. How will you maintain vegetable room temp. More and other spaces lower.
7. Centrifugal pump clearances.

14/1/2015
External: Reddy
Internal: Gopikrishan
8th person
3
1 annex1, annex 6 certificates and documents
2 bitter end
4b
1 engine slowdown reasons
2 air compressor relief valve testing
5
1 insulation test?
2 alternator synchronising
3 power balancing in generator
4 what and all cheks to carry out before starting generator?

6
1 piston checks?
13-01-2015
APPLIED FUNCTION: 6
EXTERNAL : REDDY SIR
INTERNAL : CHAUDHARY SIR
I AM THE SECOND PERSON ENTERED IN THE CABIN OF REDDY SIR(CABIN 8)
AS SOON AS I ENTERED INSIDE HE ASKED ME TO WRITE MY NAME AND SHIP'S NAME
THEN ASKED ME TO WRITE MAIN ENGINE PARTICULARS
THEN STARTS WITH QUESTIONS(ANGER AND CURIOSITY IN HIS FACE)
1) WHAT ALL OVERHAULS YOU HAVE DONE IN YOUR SHIP?
I TOLD PURIFIERS,FUEL INJECTORS,FUEL PUMPS ETC
2) DON'T U HAVE DONE ANY OVERHAUL OF PUMPS?
YES I HAVE DONE SIR. I HAVE DONE OVERHAUL OF CENTRIFUGAL PUMPS SIR.
3) OK TELL ME WHAT ARE THE PARTS OF CENTRIFUGAL PUMP?
4) WHAT IS WEAR RING?
5) WHAT IS THE CLEARANCE IN WEAR RING?
6) WHAT ALL YOU WILL DO WHEN YOUR PISTON IS TAKEN OUT FROM MAIN ENGINE?
BASICALLY HE IS ASKING FOR CLEARANCES AND CHECKS AND ALL CLEANING WORKS
8) WHAT IS THE NAME OF THE TEMPLATE FOR MEASURING THE CLEARANCE IN PISTON CROWN?
7) WHAT ARE THE CLEARANCES TAKEN IN PISTON RINGS?
8) WHAT IS THE USE OF BUTT CLEARANCE?IF LESS WHAT WILL HAPPEN,IF HIGH WHAT WILL
HAPPEN?
9) WHAT ALL LIFTING APPLIANCES IN ENGINE ROOM?
10) WHAT ARE THE SAFETIES IN ENGINE ROOM CRANE?
11) WHAT ALL YOU WILL CHECK IN CHAIN BLOCK?
12) HOW YOU WILL DECIDE WHICH CHAIN BLOCK YOU ARE GOING USE?AND WHERE IT IS
MENTIONED?
HE IS ASKING ABOUT SWL
13) HOW WILL YOU COME TO KNOW THAT THE CHAIN BLOCK IS GOING TO HOLD THE SPECIFIC
WEIGHT MENTIONED?
I TOLD BY CERTIFICATES WE ARE GETTING FROM THE TESTING DONE IN SHORE/DRYDOCKS. HE
TOLD WHAT IF IT IS AN OLD ONE AND DONT HAVE ANY CERTIFICATES?
14) WHAT ARE THE CHECKS YOU WILL DO BEFORE STARTING YOUR GENERATOR?
15) WHERE IS THE BATTERIES PRESENT IN SHIP?
16) WHAT ALL PRECAUTIONS YOU WILL TAKE BEFORE ENTERING BATTERY ROOM?
17) WHAT ALL CHECKS YOU WILL DO FOR BATTERY?
18) WHAT IS THE STANDARD SPECIFIC GRAVITY OF BATTERY?
19) WHAT IS THE VALVE TIMING DIAGRAM OF 2 STROKE ENGINE?
I DIDNT HEARED THE QUESTION SO I ASKED HIM AGAIN. HE TOLD OK WHAT IS THE INJECTION
TIME FOR 2 STROKE ENGINE AND 4 STROKE ENGINE?
20) WHAT ALL SAFETY DEVICES IN AUXILLIARY ENGINE?
EXTERNAL: OK GO OUTSIDE AND WAIT FOR THE RESULTS.

ORALS COMPLETED FOR ME AT 10.30HOURS AND WAITING FOR THE RESULTS UPTO EVENING. I
THOUGHT I AM GOING TO FAIL AS THE EXPRESSION ARE TERRIFIC.
EVENING CHAUDHARY SIR CAME AND CALLED EVERYONE.
CALLED MY NAME AND WHEN I ENTERED INSIDE BOTH REDDY SIR AND CHAUDHARY SIR THERE.
CHAUDHARY SIR: DID U COMPLETE YOUR WRITTENS?
YES SIR
ARE U APPLIED FOR FUNCT 6 ONLY?
YES SIR
DID U COMPLETED OTHER PAPERS?
YES SIR
OK GO.YOU PASS
FINALLY CLEARED CLASS IV EXAMS.THANKS FOR MY FRIENDS ,PARENTS AND RELATIVES FOR
ENCOURAGING ME AND SPECIAL THANKS TO THIS GROUP WHICH HELPED ME TO CLEAR MY
EXAM.
Date: 14.01.2015
functions applied : 3,4b.5
attempt :2
internal surveyor : mr .chouthry
external : dont know,but external only asked all questions
function: 3
*what type vessel you sailed,
* what is special area ? Why we calling those areas as special area ?
1.certificates under marpol annex 6
2.documents under annex 6
3.certificates under annex 1
4.documents under annex 1
5.bitter end diagram
6.in emergency situation how you operate bitter end ?
7.bunker plan
8.types of bulkhead
9.explain about class A bulkhead,class B bulkhead
function : 4b
1.what type of air compressor in your ship ?
2.starting procedure of air compressor
3 in your main engine safety alarms,,,parameters in normal load,,,,
4.boiler mountings
5.what is the purpose of air vent
6.main engine specifications
function : 5
1.msb safeties
2,preferential trip explain

3,essential load and non essential load


4.classification of insulation
5.factors affecting insulating resistance
6.how you will check insulation resistance in motor
7.deck machineries which class insulation ?
8.engine room motors which class insulation?
9.battery maintenance? what are all things you will check in battery
10.what is the specific gravity in fully charged battery?

20/2/15
internal chowtri
function 3
1 Isps code
2 chemical foam mechanical foam different
3 annex 1 to 6
4 annex 5 regulation
function 4b
1 valve timing diagram
2 specic fuel consumption
function 5
induction motor principle
2 transformer
3 step up transformer where its used in engine room
function 6
1 bumping clearance
2 tapper clearance
3 boiler blow down
4 boiler blow through method
5 boiler water treatement
6 boiler water test
result
function 6 pass

Feb 13 2015
Fresher
Internal: Chowdry
External:Venugopal(AMET)
Fun 3:
annex 1 special areas
Certificate and documents
SECA Areas
Annex 6 Documents
Nox technical file Wat r all contents ll be there

STP discharge criteria


Wat is stability
Wat is displacement
How ll u calculate
Fun 4b:
Wat type of engine
My engine RTA
Difference between RTA AND RND Series
Wat is the main advantages in ME Main bearing
Purifier interface
Why no of disc r provided in purifier
Wat is the main principle in between two discs
Fun 5
Wat is Power factor
Apparent power
How ll u increase the power factor
How ll u increase the true power
Battery room safeties
MSB safeties
Preferential trip
Reverse power trip
Simulation
If it is not there Wat ll happened
In steering gear y over load trip is not there
Fun 6:
AE cylinder head overhauling
Starting air valve where it is mounted
How the air is going inside
Cylinder relief valve where it is mounted
If bilge pump it is not taking suction how ll u identify. By visually
My engine yanmar 4 stroke
Got Function 5
Thank u 2 all fb and watsapp groups
Sorry 4 late posting

Date: 20-2-15
Fn applied: 3,4,6
Internal: Gopi
External: Unni Krishnan
Fn3:
Ships sailed?....container n tanker(VLCC)
Tell me the construction difference between them?
What is freeboard, why is less for tankers and use of it?
How many cargo tanks?

How many ballast tanks?


What are the ballast arrangements in tanker?
How cargo bilges pumped from ur tanker and container as well?
What is discharge criteria for Machinery space bilges?
What are the arrangements for securing containers?
Tell me abt IMDG? And reg to store IMDG cargo?
Fn4:
Engine spec in ur two ships? 9k98ME, 7RTA84T
Tell me abt control systems of ur ME engine?
How fuel pump works in ur ME engine?
What are the sensors in fuel pump in ME engine?
How much is pressure of servo oil in ME engine and what kind of valve is ur solenoid valve?
How was fuel pump in ur sulzer engine and what was difference?
What is fuel pump pressure and why?
What is diff between VIT and other fuel pumps?
Why VIT is used and advantages?
How chain is lubricated and what type of timing gear in ur ship?
What type of cam in ur engine?
How to calculate IHP, BHP, MEP?
Fn6:
Diff types of cooler?
Adv of plate type cooler?how ll u come to know cooler is leaking? How to find leaking plate?
Type of purifiers in ur ships? ALFA LAVAL and MITSUIBISHI
Which is efficient? I said both r same.
Why clarifier n y not purifier mode?
In ur ship, compressor how many stages?
What not compress in single stage?
Why intercooler is provided?
Compressor not starting, reasons?
Safety valve pressure? When do u operate easing gear?
How to remove A/E main bearing bottom half?
External was satisfied with all my answers, and he was ok with all function.
Decider ques:
INTERNAL: u r going to operate co2 fixed fire ext, what ll u do?
U r opening cooler and checks u make?
I said answers to all ques..
Finally gopi sir asked how many attempts, I said its my second attempt.
He said ok then, I ll give u Fn 3 and u apply 4&6 next time.
Bad luck today but happy getting fn3 which is biggest headache.
Keep posting ques, thank u guys...
20/02/15
Fn applied 4b & 6.

Intl surv mr gopi krishnan sir


Extrl surv mr unni krishnan sir
1. Ur ship spec & what of ship u sailed.
2. Cooling sys of ur ship engine, & what all the parts r cooled in ur engine,
3. Why expansion tk provided,
4. How to test fuel vv and what r all u check. And fuel injecting pr.
5. What if fuel dripping.
6. Wt type of fuel pp in ur engine and explain abt VIT and advantage of it,
7.how u calculate the power,
8. Reversing of ur ship,
9.checks before starting air compresor,
10. Y multistage comp r used and adv of it.
11. Diff betw clarifier and purifier,
12. Y gravity disc is used .
13. Visocity and its unit
14.how u select gravity disc
15.a/e safties
16. What is bursting disc and material and it is not used in other cooler.
And forgot few ques
spl thanks to all of u.
18 feb 2015
Internal: Balasubramanian
External: Gopikrishnan
8th person
Function 3
1 fire detector types?
2 fire detect working?
3 heat detector types>
4 heat detector working?
5 all annexes name?
6 annex 5 discharger criteria
7 fire line why relief valve?
8 emergency fire pump where it is located?
Why it is separately located?
9 fire detectors where and all it is located?
10 hypermist and sprinkler difference?
11 fire hose maintenace?
12 methods of rolling fire hose?
13 latest heat detector working?
14 free surface effect?
15 reserve buoyancy?
16 reserve buoyancy which spaces is accounted?
17 annex 6- latest 2015 sox nox values, ozone depleting substances?

18 sewage holding tank all reguations and new regulations?


19 in what speed you can dicharge sewage?
Function 6
1 liner calibration?
2 air compressor not developing pressure how will you identify the problem?
3 composite piston advantages?
4 filter chocked how will you come to know?
5 butt clearance, axial clearance?
6 antipolishing ring where it is located, why it is located?what it is doing?
7 hydraulic jack how it is working?
what happens in hydraulic jack? what it is doing on hydraulic nut?
8 centrifugal pump overhaul?
9 liner calibration tell from opeing the cylinder head?
10 steam trap purpose?
11 water hammering?
12 simple manouevring diagram?
attempt 2. mmd chennai. surveyor gopi.
20/2/2014.
fun3:
1.what material ship is made of? and carbon content in it?
2.type of floors?
solid and bracket floor.
3.in which type of ships solid and bracket floors are used.where its not used?
4.annex 4 ? when it came into force?
REGULATION FOR PREVENTION OF POLLUTION BY SEWAGE FROM
SHIPS Entry into force from 27th September, 2003.
5. when the annex 4 special area came to force?
baltic sea from 1 st jan 2013.
6.annex 4 discharge criteria?
Comminuted & disinfected system using approved by the administration, at a distance of >3
nautical miles..Not comminuted or disinfected at a distance of > 12 nautical miles.after i said the
above he said u r missing a very important point here.. i dont know what it is..
7.locations where emergency fire pump can be kept.?
fun 4 and 6:
1.boiler manual start
2.sea water cooler overhauls and checks?
3.generator daily routine maintenance?
4.auxiliary engine crankcase checks?
5.one cylinder unit exhaust temperature is high reasons?
6.hot corrosion?
fun5:
1.types of fuses?
catridge, enclosed,semi enclosed,diazed,neozed,nh,hrc,semi conductor.he accepted.

2. explain diazed and neozed fused? where it is used onboard?


i dont know where its used on board.
3.transformer safeties?
i said i dont know.
4.if i show u a transformer how u know its step up or step down.
i said i will say it based on the winding turn in each side and he accepted
5.synchronous motor methods of starting?
(i said:PRIME MOVER STARTING ( FROM D.C. SOURCE)and
SELF-STARTING or INDUCTION MOTOR STARTING
he said he never heard of the second method of starting from where did u study).
6.emergency switchboard equipment?
(i started saying equipment like circuit breaker,fuse.he interrupted and said i asked switchboard
equipment didnt u understand my question then i said supplies like steering gear emg air comp
but he again interupped and said i guess u didnt understand my question,i dont know what else
is the answer.)
7.steering gear safeties?
(Electrical motor overload alarm.
Power failure alarm.
High temp. Alarm.
Self starting after power failure.
Short-circuit trip.
Phase failure alarm.
200% insulation in motor). and he said then?
all the best.. keep posting questions.god bless.
18 feb 2015
Internal: Balasubramanian
External: Gopikrishnan
10th person
Function 3
1 Fire tetrahedrant?
2 Where and all DCP can be used?
3 MARPOL- annex 1 discharge criteria?
4 air pollution?
5 ORB?
6 ORB how many year to retain on board?
7 Bunker delivery not how many year to reatain on board?
8 Bunker survery?
9 metal- d class fire- what extinguisher?
10 soX REGULATION, no x regulation?
11 Hypermist system?
12 How hypermist extinguisher works?
13 fire detector failed, how to come to know other than routine maintenace?
Function 4b and 6
1 crankshaft deflection?

2 lub oil testing different methods?


3 microbial degrdation?
4 how will you cometo know about microbial degradation?
5 boiler cold starting?
6 Why vent is open at the starting?
7 Safety valve what tool is used?
8 4 stroke and 2 stroke valve timing diagram?
9 tappet clearance
18/02/20015
internal : CHOWDRI
External : REDDY (AMET)
FRESHER
ASKED ME TO WRITE DOWN SHIP NAME & ENGINE SPECIFICATION .
func 3
ANNEX 1 DOCUMENT (BDN, BUNKER MEETING RECORD )
ANNEX 6 DOCUMENT
TYPES OF FIRE DETECTOR USED IN E/R ? WHY DIFF DETECTOR USED IN E/R ?
HOW FLAME DETECTOR WORKS ?
FUNC 4B
WAT ALL SLOWDOWN ALARM OF M/E ?
AT WAT PRESSURE SLOW DOWN ALARM & WAT NORMAL PRESSURE ?
AT WAT TEMP JCW HIGH TEMP ALARM SET?
JCW INLET & OUTLET TEMP ?
FUNC 5
BATTERY MAINTENANCE ?
STEERING GEAR MOTOR REGULATION?
TYPES OF LIFTING EQUIPMENT IN SHIP ?
SAFTIES IN HOSE HANDLING CRANE ?
WAT U MEAN BY SWL ?
FUN 6
FWG WATER GENERATOR STARTING PROCEDURE & VACCUM NOT PRODUCING
REASON ?
WAT MAJOR OVERHAUL DID ON UR SHIP ?
A/E SCRAPER RING CHECKS WAT WILL U DO?
18 feb 2015
Internal: Reddy
External: Chowdri
3rd person
Function 3
1 annex 1 certificates and documents?
2 annex 6 certificates and documents?

3 what are the fire extinguishing sytem in your ship?


4 what are all the detectors in your ship?
Function 4b
1 Main engine slowdown alrams values?
main engine setting values?
2 Generator how will you take in load?
3 If voltage drop down what you will do?
Date:17-02-2015
choudhry & bala subramanian
fun 3
1.dcp action on fire
2.co2 fxed fire fighting weekly check,opeation procedure
3.diff b/w hyper mist & sprinkler
4.how to re fill foam extinguisher
5.hole on gap in foam exting. reason
6.discharge criteria annex 5
fun 4b & 6
1.mcr
2.sp.fuel consumption
3.gauge glass blow through
4.pistin ring clearance & draw
5.crancase inspection
6.how 2 u find scavenge fire when u r n watch
7.tappet clearance
8.when u r n watch what r all problems u call c/e.
Internal :gopi
No external
I said I had my first attempt with mathews.he asked me what are the questions last time I was
asked
Types of floors
Portable co2 inspection n maintenance
Precautions before releasing co2 in engine room
Auxiliary engine safeties and trips
Types of motors
Shell n tube type cooler opening n check
Commutator
Emerg. Switchboard supplies
Steering gear motor safties
Boiler starting manually
How to take tappet clearance( deciding qstion) gave fn 6

Fns applied 3,4,5,6 internal.gopikrishna sir. Fn 3.what is ism, what is ur company ism policy.isps
certificate,certificates in ism and where u can find these certificates. Purpose of inclining
experiment,gunwale,what is ur fixed fire fighting system.I said co2 n he asked what are all weekly
maintainance... Fn 4 n 6.how do u calculate power,clover leafing,if u find oil in hot well what is ur
action, purifier gravity disc selection method,types of safety valve,scavenge fire indications n
preventive measures,tappet clearance and also asked what is the cam angle while taking tappet
clearance.? Fn 5.power factor,what is leading n lagging circuit? What action do u take if circuit s
lagging? ESB supplies.? Steering gear motor safeties?... Thank u all fr sharing ur valid infos
here...
18 feb 2015
Internal: Balasubramanian
External: Gopikrishnan
12th person
Function 3
1 Fixed fire fighting system?
2 How will you mix foam in foam tank?
3 CO2 bottle pressure?
4 Types of floors?
5 Co2 entry checks?
6 how will you confirm there is no perosn in engine room before releasing co2?
7 when you are in engine room how will you come to know co2 is releasing?
Function 4b
1 Valve timing diagram -4 stroke and 2 stroke?
2 crankshaft types?
3 crankshaft material?
4 Why crankshaft deflection?
5 Cylinder line material?
6 scavenge fire what will happen?
7 TYpes of turbocharger?
8 Constant type turbocharger explain?
18 feb 2015
Internal: Reddy
External: Chowdri
5th person
Function 5
1 IF AVR does not work how will you maintain the voltage?
Function 3
1 annex 1 and annex 6 certificates and documents?
Function 4b and 6
1 how to manually start air compressors?
2 chain block fail safe arrangement diagram?
3 how to remove oil scarpper ring in pistons?
4 boiler alarms?

5 If suppose low low water level trip, what will happen?


what will you do?
6 Centrifugal pump wear ring purpose?
16 feb 2015
Internal : Gopikrihnan
External :Unnikrishnan
7th person
Function 3
1 annex 1 dischage criteria
2 torsion box
3 TEU
4 Oil filtering equipment
5 stern tube lubrication system
6 stern tube safeties
Function 5
1 short circuit and open circuit
2 multi meter and megger difference
3 where and all multimeter is used
4 how will you identify short and open circuit
Function 6
1 connecting rod checks
2 purifier gravity disc how will you select
3 upto how much temperature you will heat the oil before entering purifier
4 air compressor safeties
5 you first stage relief valve is lifting reasons?
6 how will you select a pipe?
7 how will you change a sea water pipeline?
a purpose of line
b connection between line parts
c flange size
d type of joint
e coupling
18 feb 2015
Internal: Balasubramanian
External: Gopikrishnan
11th person
Function 3
1 fire detector
2 Types of smoke detector?
3 types of heat detector?
4 Wheather still we are using bi-metallic strip type heat detector?
5 Bi-metallic strip materials?
6 fire hose- maintenace?

7 Cold countries-0degree celcius- fire hose maintenace?


8 After draring the fire hose lines what should you do befor rolling in cold countries?
Function 4b and 6
1 Tappet clearance?
2 crankcase inspection?
3 Types of turbocharger in your ship?
4 Scrapper ring checks after overhauling?
5 lub oil test?
6 air compressor not builing up pressure reasons?
7 steering gear relif valve one is for excess pressure releasing, what is another safety?
8 plate type heat exchanger overhauling?
9 centrifugal pump wear ring clearance?
10 hopper capacity in dredger vessel?
3000 m3
11 Centrifugal pump overhauling?
Function 5
1 MSB safeties?
2 Emergency generator regulations?
3 Emergency battery working hours?
48 hours if no emergency generator onboard
4 undervoltage trip?
how it is working?
5 preferential trip?
6 wheater during running condition under voltage will come or not?
7 reverse power trip?
18 feb 2015
Internal: Balasubramanian
External: Gopikrishnan
9th person
Function 3
1 emergency fire pump regulations
2 oil record book
3 special area
4 difference between heel and list?
5 crane lift load at the astern end of the ship where will centre of gravity will go?
6 crane keeps load at the centre of the ship where will the centre of gravity will go?
7 detectors used in your ship?
8 heat detector function?
9 how will you ensure heat detector is bimetallic or not?
10 how will you come to know by just looking wheather it is smoke detor or heat detector or flame
detector?
Fucntion 5
1 Intrinsically safet equipment? how will you ensure it is intrinsically safe?
2 what is intrinsically safe?
3 ac synchronous motor why it is not self start?

4 Thyristor function?
5 Tubelight diagram?
6 Explain each and everypart in tublight and its functiona and what it is doing?
7 Flourescent lamp?
8 Why capacitor and function?
9 Why resitor and fuction?
10 Why starter function?
11 Why ballast, what function?
18 feb 2015
Internal: Reddy
External: Gopikrishnan
7th person
Function 4b
1 main engine slowdown alarms?
2 auxiliary engine preparation starting?
3 air compressor manual starting?
Function 3
1 annex 1 certificates and documents?
2 co2 release precautions?
3 battery room safeties?
18 feb 2015
Internal: Reddy
External: Gopikrishnan
6th person
Function 3
1 annex 1 discharge criteria
2 annex 1 and annex6 ceritificates and documents?
3 special area
4 detectors?
5 how detectors are working?
6 heat detectors how it is working?
7 heat detector not working, how will you come to know?
8 c02 flooding system ?
9 why heat sensor in purifer and no smoke sensor?
10 co2 bottle tare weight?
11 abandon ship drill how will you carry out?
12 abanadon ship drill how many times once you will carry out?
18 feb 2015
Internal: Reddy
External: Chowdri
4th person
Function 3

1 annex 1 certificates and documents?


2 annex 6 certificates and documents?
Function 4b
1 FWG before starting no vacuum producing reasons?
2 maine engine slowdown alarms?
3 lub oil low pressure alarm what pressure alram comes?
4 JCW high temperature alarm what temperature?
5 Inlet outlet JCW temperature?
6 Steering gear motor safeties?
7 In piston scrapper what and all you will check?
8 What are all the detectors present in ship?
9 What types of flame detector?
10 What are all the lifting arrangement in your ship?
11 Safeties of engine room crane?
12 Battery checks, specific gravity?
13 What is SWL of your crane in your ship?
18 feb 2015
Internal: Reddy
External: Chowdri
2nd person
Function 3
1 annex 1 what and all certificates and documents?
2 Battery room regulations
3 steering gear safeties?
4 all certificates carried on board?
5 annex 6 certificates and documents?
Function 4b
1 fuel injector testing pressure
2 centrifugal parts
3 how much clearance should be there?
4 IF clearacne is more what will happen in centrifugal pump?
Function 5
1 motor safeties?
2 phase failure?
3 specific gravity of battery?
Internal: Reddy
External: Chowdri
1st person
Function 6
1 overhauing of globe valve
2 tappet clearnace
Fucntion 3
1 fire fighting system
2 annex1 and annex 6 certificates and documents?
3 ozone depleting substances?

categories? what and all mentioned over that?


4 all documents carried on your ship?
17 feb 2015
Internal: Chowdry
External: Balasubramanian(HIMT)
7th person
Function 3
1 Type of ship
Dreger ship
2 Oil filtering equipment working principle?
3 Oil filtering equpment how it is working?
4 Centre of gravity?
5 Stabilty of ship?
6 Fire fighting parties?
7 DCP how it smoothens?
8 ODME how it detects and how it stops?
Function 5
1 Insulation resistance testing
2 Earth fault?
3 3phase-3 wire system?
4 ESB supplies?
5 Photo cell produces voltage or current?
Function 4b
1 Main engine crankcase inspection?
2 Swell Compensator?
3 Jet pump uses?
4 Jet pump pressure?
Function 6
1 Have you done dredge pump overhauling?
17 feb 2015
Internal: Chowdry
External: Balasubramanian(HIMT)
6th person
Function 3
1 What is DCP doing on fire?
2 What is foam doing on fire?
3 What fixed fire fighting system onboard?
co2
4 sprinkler and hypermist difference?
5 how to refill foam extinguisher?
6 On top of foam extinguisher why small hole is present?
7 annex 5 discharge criteria?
8 What is comminuted?
9 What is special area?
10 what is outside special area

Functin 4b
1 YOu are on watch how will identify scavenge fire?
2 MCR?
3 SFOC?
4 You are on watch,When you notify chief engineer?
5 crankcase inspecton?
Function 6
1 Boiler gaugle glass blowdown procedure?
2 What are all the clearances in piston ring and draw?
17 feb 2015
Internal: Chowdry
External: Balasubramanian(HIMT)
5th person
Function 3
1 type of ship
chemical tanker
2 Fire control plan
what and all the things will be there
3 Types of fire
4 what and all extinguisher you will use for each type of fires?
5 dcp working principle
6 DCP working procedure?
7 You go to ship and find extinguisher without a label, and everbody
tell it is a foam extinguisher, as a 4th engineer what you will do?
8 annex 1 how many regulations are there?
9 explain annex 1?
10 what are all annexes in marpol?
11 bunker delivery note?
12 garbage record book how many year you will keep on board?
13 ORB how many year you will keep on board?
Function 4b and 6
1 Liner wear how will you find out?
2 cylinder bore how will you measure?
3 crank web deflection when you will take?
4 Tappet clearance?
5 crankcase inspection?
6 In OMD what you will check?
17 feb 2015
Internal: Chowdry
External: Balasubramanian(HIMT)
4th person
Function 3
1 Fire man's outfit?
2 fire control plan?
3 fire party?

4 Types of fire
5 C type fire
6 OIl discharge criteria
7 Classification of fire?
Function 4b
1 power card- indicator diagram
2 NPSH
3 piston ring clerance
4 cylinder head mountings?
5 relief valve function
6 air compressor- second stage cooling,
why we kept intercooler
Function 5
1 Emergency power supply?
2 Msb safeties
17 feb 2015
Internal: Chowdry
External: Balasubramanian(HIMT)
3rd person
Function 3
1 Quick closing valve- where and all it is used, purpose, how it is working?
2 Oil discharge criteria
3 Classification of fire
4 What and all fires, what extinguisher used?
5 ORB?
6 purpose of ORB?
7 why are you mainting ORB?
8 How long we are maintaing ORB?
Function 4b
1 Power card diagram?
2 Piston ring clearnace diagram
3 how to use hydraulic jack?
4 Liner ovality?
5 Where ovality is taking place?
6 Purpose of antipolishing ring?
7 tappet clearnace?
8 need of tappet clearance?
9 engine power?
how to calculate
10 Under what and all conditions you think that tappet clearance should be taken?
11 Microbial degradation?
17 feb 2015
Internal: Chowdry
External: Reddy

2nd person
Function 3
1 annex 1 certifiates and documents
2 annex 6 certificates and documents
3 bunkering
4 settling tank mountings
Function 4b
1 Generator starting
Flywheel freeness checking
2 Derration alarm
3 slowdown alarm relating to exhaust
Function 6
1 F.W.G staring procedure
2 No vacuum developing what you will do?
3 compressor starting procedure?
Like

7feb 2015
Internal: Chowdry
External: Reddy
1st person
Function 3
1 annex1 full explain?
2 annex1 documents which you carry out?
3 annex 6 certificates and documents?
4 anchor chain bitter diagram
5 windlass diagram
Function 4b
1 maine engine slowdown
2 Maine engine piston cooling lub oil standard pressure, slowdown pressure?
3 Thrust bearing high temperature and what temperature engine will slow down
4 air compressor manual starting
5 unloader mechanism explain
6 unloader working?
7 4 stroke valve timing diagram
Function 6
1 cylinder head mountings
2 fuel injector testing
3 atomisation
4 penetration
5 centrifugal pump parts
6 wear ring clearance between impeller and wear ring
7 air starting valve working

18/02/2015
internal-gopi sir
Fn3
fire plan?
Emcy fire pump reg?
Emcy fire p/p discharge rate?
Hypermist working fn & reg?
Fireman outfit?
Types of fire detector use in ur ship? How come u ensure this is bimetal strip type by just seen
without open that?
Orb regulation & entry?minimum Preserve time onboard
Diff b/w heel & list?
Free surface effect?
If weight added to the ship by crane wt will be the center of gravity position?
Fn 5
Under voltage trip?
Thyristor?
Y ac synchronous motor is not self start?
Fluroscent lamp diag & fn of ballast ,starter & resistor &capacitor?
Battery room regn
Got fn5.
16 feb 2015
Internal : Gopikrihnan
External : Unnikrishnan
6th person
Function 3
1 windlass type
2 checks in windlass
3 while lowering the anchor how will you stop and held in position
4 annex suitable in your ship
Container ship
1, 3,4,5,6
5 Sox, nox emissions values
Function 5
1 msb safeties
2 Steering gear motor safeties
3 how many types of trips
Function 4b
1 two stroke and 4 stroke
2 lubrication types in 4 stroke engine
Function 6
1 purifier vibration reasons
2 centrifugal pump and gear pump differences
3 when will you discard connecting rod bolts
4 gear pump principle

5 crankcase inspection
6 auxiliary engine safeties
7 pipeline specification for Sea water
8 in pipeline flange specifications
16 feb 2015
Internal : chowdri
5th person
4b & 6
1 type of ship
Oil tanker
2 copt discharge procedure
3 what is the purpose of vacuum condenser
4 composition of I. G
5 COPT starting procedure
6 in generator piston overhaul, what are all checks
7 what type of main engine
two stroke single acting direct reversible crosshead type
engine with exhaust gas turbocharged and air cooled engine
8 purpose of Turbocharger
9 turbocharger functions ( tell Mathew answers)
10 methods of supercharging (deven aranha)
11 how to take butt clearance
12 procedure for starting COPT AS 4TH ENGINEER?
16feb2015
Internal: Chowdri
4th person
Function 3
1 hull material
2 types of movements in ship
3 In dry dock as a cadet what you will do
4 hogging how it happens
5 sagging how it happens
6 ship Hull painting
7 displacement-what is in your ship?
8 what and all you know about displacement?
Function 4b
1 4 stroke valve timing diagram

2 tappet clearance
3 fuel oil bunkering how will you take
4 how will you change m3 to tonnes formula
5 rudder wear down
16feb2015
Internal: Gopikrihnan
External: Unnikrishnan
3rd person
Function 3
1 Inert gases
2 dead weight tonnes?
Function 4b
1 crosshead lubrication
2 crosshead clearance
3 main engine bearing clearance?
4 fuel pump operation and what is the pressure developed in fire pump?
opening pressure why 350 bar?
5 main engine safeties?
6 starting air leak how will you find out?
Function 5
1 where and all transformer is used? where it is located?
2 Transformer how it is cooled?
3 alternator aft end bearing how it is lubricated?
4 air gap?
5 why air gap?
6 where air gap will be there?
7 Excitation d.c supply to 100volts rotor?
8 Where excitation given in stator and rotor?
9 parts of centrifugal pump?
10 how will you seal the water in centrifugal pump?
11 how purifier works?
12 how will you change purifier disc?
Date : 18 Feb 2015
Fresher
Internal : Chaudhry
External : KNG Reddy
FUNCTION 3
1. Documents in Annex 6
2. SEEMP , EEDI , EEOI?
3. Documents in Annex 1
4. What are all the Bunker Related Documents?
FUNCTION 4B

1.Manual Starting Procedures for an Air Compressor?


2.Alarms and trips in Boiler
3. What action wil you take in case of an Low Water Level Alarm?
4. How wil you replace oil scraper ring in an A/E? Cross Qns
FUNCTION 5
1.What is Fuse?? Types of Fuse ? What type fuses are used on board?
2. Steering Gear Motor Safeties?
3. Paralleling of Generator
4.During paralleling , AVR fails. .. how wil you manually adjust the Voltage?
5.What is Insulation?
6.Multimeter and Clampmeter . Explain .
7.How is a Motor Rated? How is a Generator Rated ?
FUNCTION 6
1. Parts of Centrifugal Pump
2.Overhauling of Centrifugal Pump
3. Why Clearance provided between wear ring and impeller ?
4.Lifting Equipments on Board?
5.Draw chain Block with Brake arrangement.
RESULT : FUNCTION 5
Attempt : 2
Date : 18.02.2014
Internal : gopi sir
External : balasubramanian sir(not sure)
Function 3;
Type of ship(me trailing suction hopper dredger)
Hopper capacity?
Suction pipe diameter?
Types of fire detectors?
Explain each type of detectors ?
Bimetallic strip working in heat detectors?
Material using in bimetallic strip?
Maintenance fire hydrant?
If ship going to cold zone In deck at 0c what all the preventive maintance in fire hydrant line?
Emergency fire pump regulations?
Emergency generator and battery regulations?
Function 4b&6
Tappet clearance?
Centrifugal pump overhauling procedure?
Piston overhauling?
What u will noitce when fitting scaber ring,,?
Starting air compersor Not built pressure reasons?
Crankcase inspection?
Lub oil test?

Purpose of wear ring in centrifugal pump??


Types of turbocharger??
major difference b/w pulse and constant type turbocharger?
Steering gear purpose of relief value?
Function 5 ;
Esb supplies?
Msb safety ?
Working of reverse power relay?
Explain Under voltage Trip ?
How manually parallel generator without synchronoscope and sequence lamp?
Prefential trip?
What is Single phasing effect??
Attempt:2
17.02.2015
Internal: Chowdry
External: Balasubramaniyam(HIMT)
Function:3
1. Fire control plan
2. Types of fire
3. Fire tetrahedron
4. Extinguishers used for different type of fire
5. DCP - Hw it extinguishes fire?
6. Annex 1 explain in detail
7. Garbage record book and oil record book, how long wl be carried on board
8. Bunker Delivery Note
9. ISPS code
10. Discharge criteria for garbage ovbd
11. Centre of gravity
12. What is annex 2?
13. As a fourth engineer, u found a extinguisher with no details in it, but u were told that it is a
foam type. What will u do?
14. Difference between mechanical foam and chemical foam extinguisher
15. High fog system
Function 4b & 6
1. How will u measure bore dia of liner
2. Cylinder liner ovality
3. Anti polishing ring
4. Reason for taking crank shaft deflection
5. Crankcase inspection
6. What maintenance in OMD
7. Hydraphore pump running continuously, Reason ?
8. Reason for FWG salinity alarm
9. Why wear ring in centrifugal pump
Result: Got fun 3

9th February 2015


9th person
Internal: Chowdry
External: Chidambaram
Function 3
1 tank washing methods, arrangements?
2 fire extinguishing purpose of dip tube?
3 pump room entry?
4 Dcp powder compound?
5 NOx,SOx value?
6 how to reduce NOx and SOx?
7 Why NOx and SOx increases?
8 Difference between hypermist and sprikler?
Function 6
1 guide ring?
2 how will you fit the piston?
3 how will you fit bearing in shaft?
Function 4b
1 air compressor safeties?
2 crankcase relief valve opening pressure?
3 sea water pipeline got hole, how will you rectify temporarily?
16feb2015
Internal: Gokirhnan
1st person
Function 3
1 Co2 fire fighting portable - annual checks?
2 checks in connectimg rod?
3 purifier rpm?
4 enclosed space rescue drill?
how much day once, how will you carry out?
5 Garboard strake?
6 Purpose of garboard strake?
7 degrees of freedom in ship?
8 annex 1 machinery space outside and eca area differences?
9 what are the different special areas?
10 MAN overboard drill and timing?
Function 6
1 purifier rpm?
parts of purifier from top to bottom?
2 Central cooling system?
3 advantage of central cooling system?
4 boiler condensate tanks oil is filled, what are your actions?
from where oil is spilled?
5 central cooling system line diagram?

6 drain plug where and all it is located?


7 coffer dam where drain plug will be present?
16feb2015
Internal: Gokirhnan
2nd person
Function 3
1 GRT, GT, formula
2 advantage of semi-built rudder
3 CO2 extinguisher
4 CO2 bottle pressure
5 annual examination of co2 extinguisher?
6 fire plans- what are the details in the fire plan?
7 location of fire plan?
8 light displacement?
9 tare weight?
10 annex 1 dischage criteria?
Cleared class 4 yesterday.
Sorry for posting late..I don't have net pack .
Function 3
Surveyor:chitambaram(alone)
1.which ship u sailed?(car carrier)
2.what arrangement to avoid water entering in ramps.
3.explain fixed fire fighting in cargo hold & engine room.
4.working & how to test smoke & heat detectors.
5.explain dcp extinguisher. 6.if cars are not starting while discharging what u will do.
7.why freeboard is high.
Attempt 3
Surveyor reddy sir
Date 17.02.2014
Function 3
1.annexe 1 document (he needs more and more)
2.annexe 2 document
3.settling tank mountings..
Function 4 b
1.ae starting procedure
2.me slow down in relation to exhaust
3. Important points to see while putting oil scraper ring
4.fwg starting and low vaccum reasons.
Function 6
1.starting of air compressor
2.centrifugal pump over haul
3.parts fitted in pump shaft
4.parts fitted in pump casing
5.clearance affecting pump efficiency
Got function 6

13feb2015
2nd person
Internal: Chowdry
External: Venugopal
Function 3
1 What is stability?
2 Co2 fixed type fire fighting under what regulation in Solas?
Function 4b
1 Tell something about multistage compressor?
2 What is force?
3 what is efficience?
Function 5
1 What is purpose of Emergency Generator and where its use the emergency power supply?
2 HOw is current produced?
3 how to measure air gap?
4 what are the inspection carried out to emergency fire pump?
Fuction 6
1 What are the inspection carried out in centrifugal pump?
2 How to change the gland packing in centrifugal pump(step by step)?
Attempt:2
Date:16/2/2015
Inter:chowdry
Extn:unnikrishnan
Fun 3:
1.crane safety
2.purpose of limit switch
3.collusion bulkhead regulation
4.stiffners
5.frame arrangements in ship
6.fixed fire fighting system
7.co2 calculation, regulation
8.windlass safety and arrangement
9.haws pipe
10.break arrangement for windless
11.annex 1 oil bilge discharge certain.
Fun 4b:
1.2 and 4 stroke different.
2.lube oil arrangements and diagrams
3. Full pump and arrangement
4.exhaust valve getting hot...reasons.
5.crankcase explosions.
6.oil mist detector working
7. Safety in m/e

8.performance calculation in main engine


9.indicator cock and diagrams
Fun 5:
1.short circuit
2.reactive power ,apperent power,active power
3.relation b/with active and apperent power
4.power factor
5.type of starters
6.star-delta starter arrangement
7.if star connection not there what will happen
8.reverse current trip
9. Hw to check reverse current.........and to many cross questions
Got fun 5
13feb2015
5th person
Internal: Chowdry
External: Venugopal
Function 3
1 Co2 weekly inspection?
2 angle of loll?
3 life boat drill regulation?
4 CO2-dip tube purpose?
5 stability
6 If object is moved, how will be the stability?
7 angle of loll- how to bring it to upright position?
8 Co2 regulation?
9 How will you weigh the co2 bottles?
10 how will you find fire in cargo hold in container ship?
Function 4b
1 how much tie bolts in your engine?
2 Number of cylinder head bolts in your engine?
3 Multi stage compression in air compressor?
4 how much safety valves in your boiler?
5 Boiler back pressure manometer where there?
6 how the scavenge air enters the scavenge space?
Function 5
1 Types of voltage?
2 Galvanic corrosion?
3 Transformer welding voltage?
3 Types of system in your ship- earthed and neutral system, explain in detail along with
differences?
Function 6

1 mechanical seal, which is fixed part and which is rotating part?


2 accumulation pressure test?
3 how safety valve working in boiler?
4 how will you know safety valve is lifting?
13feb2015
6th person
Internal: Chowdry
External: Venugopal
Function 3
1 Who is authorised to issue certificates?
2 who is issuing the certificates?
3 co2 flooding system?
Function 4b
1 how will you cool the cylinder head in MAN B&W ,from where the water is entering and going
out?
2 Why 15 minutes of accumulation pressure test for tank boilers?
3 Why 7 minutes of accumulation pressure test for water tube boilers/
4 Purfier separation where it is taking place more?
5 cross head lubrication in MAN B&W befor high pressrue and now how we achieve in low
pressure system?
how hydrodyanamic lubrication is provided?
6 unloaded function?
7 unloader not working properly, how will you find out?
Function 5
1 MSB safeties?
2 AVR?
3 Synchoscope?
Function 6
1 Gear pump overhauling and checks?
2 how will you select gland packing?
3 how will you cut gland packing?
4 How will you select gland packing?
5 how will you remove the old gland packing?
6 Globe valve lapping full procedure?
7 how will you remove the valve stem from the spindle?
13feb2015
7th person
Internal: Chowdry
External: Venugopal
Function 3
1 How will you calculate the BHP?
2 Life boat releasing speed?

3 Types of lifeboat?
4 Life boat equipments?
5 Who is giving the certificates for safety?
6 Who is the authority?
7 welding safety precautions?
Function 4b
1 Relief valve releasing pressure?
2 While filter cleaning, how will you take the air out?
3 Cetre bolt purpose in filter?
4 purfier lub oil how will you change?
Function 5
1 How short Circuit happens?
2 how will you find the cicuit is shorted out?
9th February 2015
8th person
Internal: Gopikrishnan
External: Chidambaram
Function 3
1 panting
2 pounding
3 arrangement for panting and pounding?
4 types of floors?
5 floors definiton?
6 reserve buouyancy?
7 co2-full system?
8 orb entries
9 orb entries related to bunker, what are all entries to be do in ORB?
Function 5
1 MSB safeties?
2 how will you improve insulation?
3 excitation?
4 SC, OC?
5 generator motoring?
6 Reverse power happens, what will happen?
7 AVR full explain?
8 Prefernetial trip sequence?
9 Generator paralleling method?
13/02/2015
attempt 1
venu gopal sir (AMET)
Gopi sir
function 3
1 tpc,how it will change

2 loadline marking
3 how draft increases in fresh water
4 fixed co2 regulation
5 fixed co2 maintanance
6 how co2 lines are blow through,how u know line is blow through
7 doc full explain
8 smc
9 safety equipment certificate issue authority
fun 4
1 main eng cylinder cooling line
2 crosshead lubrication in man engine
man engine uses low pr system how it is able maintain full fluid film
3 purification in a purifier takes place at which point(not asking about interferene point,asked
about diff in velocity in purifier)
4 why purifier disc accumulates sludge if it seperates liquid
5 me reversing
6 interlock in man engine
7 accumulation pr test def, why water tube tesed 7 min and fire tube 15
fun 5
1 msb safety
2 what happens if field current in a alternator fails while it is in parallel
3 avr with diagram
fun 6
1 gland packing selection and chaning procedure
2 gear pump overhaul
3 globe valve lapping
4 how to remove valve from spindle
first question to every one was what subject u studied and questions were not asked related to
that
function 3 and fun 5 more questions were there
got fun 3
13feb2015
3rd person
Internal: Chowdry
External: Venugopal
Function 3
1 annex 1 dischare criteria
2 annex 6 seca area
3 documents in annex 6
4 NOx technical what and all particular will be mentioned?
5 How to find out the displacement?
6 STP discharge criteria?

Function 4b
1 Sulzer RT, RND difference?
2 Main bearing advantages in engine?
3 Purifier how separation takes place?
4 In between two purifier disc what is the principle carrier out?
Function 5
1 power factor?
2 Apparent power?
3 how to improve power factor?
4 how to improve true power?
5 preferential trip
6 MSB safeties?
7 Battery maintenace?
8 in steering gear overload trip?
9 reverse power trip simulation?
10 If reverse power trip is not there what will happen?
Function 6
1 Centrifugal pump overhaul?
2 In auxiliary engine decarb, the cylinder head decarbonization?
Date-12-02-14
External-Vishweswaran
Func4B
1. MAN B&W MC engine reversing
2. What type of cam? Purpose of negative cam?
3. Starting air valve pilot air pressure?
4. F.O HP pipe leaking, how will you come to know? During minor leakage from fuel pp, how this
alarm is not initiated?
5. Draw the F.O Leak off tank Diagram
6. Location of thrust block & how it is lubricated
7. Where is Bursting disc fitted to your engine? In case the bursting disc ruptures, can u run the
engine? What arrangement provided?
8. How to calculate the power of your engine?
9. Is there any other method of calculating power other than PMI & Engine indicator?
10. Define MEP
11. What type of stern tube lubrication? How is the stern tube cooled? If aft peak tank deballasted, how is the cooling achieved?
12. Why centrifugal pump discharge valve throttled?
13. What are all the checks you carry out before putting on UMS?
14. Centrifugal pump air extraction method?
15. In shell & tube heat exchanger, how tube leak is identified?
Func 5:
1.How is generator & motor rated?

2.RMS Value & its significance


3.ACB main components
Fun6 No Qns
Thank you all for sharing ur qns.
Date 12-2-15
Applied functions ?
Fun 3 int:gopi Ext:vishveswaran sir from amet
Ship u sailed
1.Sewage discharge regulation and , tests for the stp discharge ,cross questions
2.co2 weekly checks
3.emg gen ,reg and location of it.
4.he asked why igg used than igs he asked about what cargo u carried ,and after that he left ig
5.iopp ,tanks in machinery space
6.iapp,eiapp who issues
7. Present nox and Sox regulations
8.incinerator reg,incinerator ash and Wer entry
9.grb ,person incharge
10.which code the bunkering comes in orb1
11.orb wen entries are made
Fun 4b
1.erosion plug in pump
2 .he asked needle lift of pump and asked gopi wether we can ask this question to me but gopi
said avlo level ques lam venam
3.lube oil tests onboard
4.diff between cc lo and 4s lo ,tbn values
Fun 6
1.What is risk assessment ,why do u do
2.What u do before doing any work
3.charging of refer lube oil
4.critical equipment in ur ship
5.What happens wen control air is cut to exhaust valve ,will m/e slow down .
That's all I remember guys ,will post if I remember ,all the best
DATE:12.2.2015
INTERNAL:GOPI
eXTERNAL:VISHWESHVARAN
FUN 3
SHIP TYPE
SEWAGE TYPE
CAN SEWAGE BE DISCHARGE IN PORT
SEWAGE TEST DONE ON BOARD
VALUES FOR BOD COD TSS COLIFORM BACTERIA IN SEWAGE
SEWAGE REGULATION
NOX TECHNICAL FILE

IOPP TANKS
WHERE IOPP TANKS LISTED
IOPP ISSUED BY WHOM
FUN 4B & 6
HIGH PR PUMP LEAKING WAT WILL U DO WAT ALARMS
PRESSURE WITIHIN THE CRANKCASE
BREATHER PIPE
OMD ALARMS
UMS CHECKLIST
IF ONE FIRE DETECTOR IS DEFECTIVE CAN WE PUT THE E/R IN UMS
WHY PR IS PROVIDED IN THE FUEL LINE FOR HEAVY FUEL OIL
WILL IT CIRCULATE AND WHERE IT GOES
TYPE OF CARGO PUMP
FRAMO PUMP LINE DESCRIBE
WHAT PROVISION IS PROVIDED IN HYDRAULIC OIL LINE FOR VIBRATION
THEN SOME MORE QUESTON ABOUT FRAMO
FRESH WATER GEN LOW OUTPUT WAT TO DO
WAT WILL YOU DO IF EJECTOR PUMP IS NOT BUILDING PRESSURE
LUBE OIL TEST DONE ON BOARD
WAT WILL HAPPEN TO LUBE OIL IF WATER IS PRESENT
FUN 5
TYPE OF GENERATOR
INSULATION CLASS
MSB SAFTIES
EMERGENCY ROOM REGULATION
WAT WILL YOU DO FOR BEFORE CHECKING THE ALTERNATOR INSULATION
DOES STEERING GEAR HAVE OVERLOAD TRIP
Got fun 5
ALL THE BEST GUYS
13feb2015
8th person
Internal: Chowdry
Internal: GOpikrishnan
External: Venugopal
Function 3
1 Types of collison bulkhead?
2 parts on forward side of the vessel?
3 Where are anchors secured, precaution, where it is being loacated during sailing?
4 how it is maintained in hanging postion?
5 DCP equation, maintenance, chemical reacton inside it?
6 What is the use of magnesium sterate?
7 Fire plan where it is located?
8 What are all the annexes coming under car-carrier?
1,4, 5,6

9 Isps- security levels?


10 how does a ship float?
11 Steering gear regulation?
13feb2015
4th person
Internal: Chowdry
External: Venugopal
Function 3
1 Free board?
2 Free board in which regulation?
2 free surface effect?
4 what will happen free surface effect in your ship?
Function 4b
1 air compressor valve fitting procedure?
2 tYPES OF SCAVENGING?
3 from atmosphere how scavenge air is going to the engine?
4 cylinder head how many studs?
5 chain block working principle?
6 chain block raidus of gyration reled to what working priciple?
Function 5
1 How will you order a battery?
2 Types of battery?
3 how current is produced?
4 types of fuses?
Function 6
1 Globe valve overhauling ?
2 Main engine cylinder head how jacket cooling water is entering?
13 feb 2015
9th perosn
Internal: GOpikrishnan
External: Venugopal
Function 5
1 MSB safeties?
2 What are equipments connected to emergency generator?
3 what is the use of reverse power trip?
4 Working of induction motor?
Function 4b
1 Tie rod use?
2 connecting rod lubrication in mitsubishi?
3 crosshead lubricaton in mitsubishi?
Function 6

1 Checks in centrifugal pump?


2 how impeller is attached to the shaft?
3 In shaft seat what and all you will check?
4 purifier and clarifier difference?
5 Why gravity disc is not needed in clarifier?
6 Why two springs in Exhaust valve?
Function 3
1 If a load is removed from aft, how will the draft change?
13feb2015
1st person
Internal: Chowdry
External: Venugopal
Function 3
1 Safety cut out in boiler
2 High steam pressure alarm, how will you activate?
3 chain block what and all safeties you will follow?
4 engine parts- 4 stroke?
5 Co2 regulation?
6 Ball bearing how it will fit on the shaft?
7 life boat types?
8 life boat drill?
9 boiler water testing how will check the hardner added to the water?
10 what are the machineries coming under function 4b?
11 What are the tanks before collision bulkhead?
9th February 2015
5th person
Internal: Gopikrishnan
External: Chidambaram
Function 3
1 Annex 7 what it is?
2 how to do treatment and the methods used in annex 7?
3 camber?
4 If your generator cyliner head (exhaust gas) is leaking, how will you rectify it?
Function 4b
1 Lub oil line diagram of main engine?
2 FwG not working properly reasons?
3 maine engine JCW not giving sufficient temperature reasons? even after overhauling the
cooler?
Function 6
1 In plate type heat exchanger how will you do maintenace and overahauling?
2 generator is fully opened, and before taking the piston out, what precautions you should take?
3 How will you know exhaust valve is in good condition when you take out and see in hand?

4 in uniflow and loop scavenging how is exhaust manifold arranged?


5 centrifugal pump lying down and not working for a long time, what you will do to protect it?
Function 5
1 megger volatage
2 voltage of ICCP?
3 boiler electrode spark volatage?
4 where is 24volts coming apart from batteries?
rectifier
10-02-2015
2nd person
Internal: chowdry
Fn : 3
Draw longitudinally and transversally cofferdam.
Draw and show transverse metacenter.
Annex 4
How to prevent pollution from Annex 4
ISPS
Mechanical foam
Chemical foam
Fn : 4
Draw m/e lube oil diagram
Propeller Drop
Pokergauge
Parameters recorded for refrigeration air compressor
9th February 2015
2nd person
Internal: Gopikrishnan
Function 3
1 bleve and its significance?
2 types of LPG tanks>
3 MARVS & its signinificance?
4 Fire hose length and bearing?
Function 4b
1 Types of crankcase inspection?
Function 5
1 Types of encloasere?
2 intrinsic safeties?
3 Tranformer loss and prevention
4 MSB safeties?
Function 6
1 auxiliary engine main bearing renewal?
2 Types of coupling on ship?
3 Eramto joint draw?

Internal:Gopikrishna
External: don't knw his name
Date : 11:2:15
Fun applied : 3,5,6
Fun 3:
What all fun's u applied? He wants abbreviation for COSCOPOOL
Type of ship sailed?
Ism policy of ur company
Sopep
Free surface effect? Hw to reduce it
Camber?its significane
Tumble home ? It's significance
Fixed foam system maintenance
Steering gear motor safeties
What annexes applicable to ur ship in MARPOL
FUN 5:
Battery maintenance
Battery room safeties
Under voltage trip
Reverse power trip
What is zener diode ? Application of it on board
What s rms value in ac nd it's significance
FUN 6:
Purifier manual de sludging procedure
ME Decarb procedure..
Checks nd clearances to be taken during decarb
And few more this s Wat I remember
Result :fun 6
10.02.2015
Mr. Gopikrishnan.
Fn.3
1. Wt is passenger ship.
2. How often u do abandon ship drill 3. Ur duties and actions during drill. 4. How often u lower life
boat & X
5. Steering gear safeties.
6. Contents of ship safety plan.
7. Purpose of stabilograph exp and simple X ques.
8. Entries in ORB.
9. Types of floors
10. Envlosed space entry procedure.
11. Collision bulkhead
12. Dcp and Insp
13. Bulwark

14. Ssp.
And few more can't remb.
9th February 2015
16th person
Internal: Chowdry
External: Chidambaram
Function 3
1 Bunkering procedure safeties
2 air compressor safeties
3 ballast water management
4 Hypermist and sprinkler difference?
5 Types of hypermist?
6 sprinkler system where it is taking suction from?
7 hypermist system wehre it is taking suction from?
8 Free surface effect?
9 During bunkering oil spill happens, what you will do?
10 SOPEP equipments?
11 Steering gear safematic system?
Function 6
1 Selection of gravity disc
2 Call point
break glass and press
3 how much call points in your ship
4 how much call points in your engine room
5 Air compressor low pressure reasons
6 Turbocharger washing
7 Tappet clearnace adjusting procedure
8 cylinder head leaking, when you will change the exhaust valve?
9 Clearance in piston and how?
10 If density of oil increases in purifier,gravity disc size will increase or decrease?
9th February 2015
13th person
Internal: Gopikrishnan
Function 3
1 co2 room weekly inspection
2 what are the garbages in your ship?
3 EG swithcboard where and all load is connected?
4 What is the use of bulbous bow?
5 types of bulhead?
6 types of insulated bulkhead?

Function 5
1 What are parts of ACB?
2 Main swithc board safeties?
3 RMS value?
4 What is the significance of RMS value?
Why it is given
Function 6
1 when will discard the con rod bolts?
2 boiler manual starting procedure?
3 Which tool is used to fix the safety valve?
4 Fuel injector testing more than 5 points?
9th February 2015
7th person
Internal: Gopikrishnan
External: Chidambaram
Function 4b
1 Boiler Y-Jet burner
2 Auxiliary engine trips and alarms?
3 Main lub oil pump is not building up any pressure, what you will do?
4 exhaust valve actuator pump, what type?
5 central cooling system diagram, LT, HT cooler inlet and outlet temperature?
6 safematic system in steering gear?
10Th February 2015
1st person
Internal: Gopikrishnan
Function 3
1 safeties in main air compressor
2 Load line diagram
3 SOLAS chapter 9
4 Angle of loll
4 co2 maintenace?
5 annex 5?
Function 4b
1 clover leafing
2 lub oil properties?
3 Centrifugal pump overhaul and inspection
4 Auxiliary engine crankcase inspection
5 Boiler manual starting
Function 5
1 Types of fuses?
2 Emergency generator regulations?
3 Thyristor?

4 MSB?
5 IR/ HOw to take for a motor circuit diagram?
6 AVR?
7 Brushless alternator?
8 Battery room maintenace?
Result: Function 5
9th February 2015
15th person
Internal: Chowdry
External: Chidambaram
Function 4b
1 FWG efficiency down reasons?
2 auxiliary engine boiler safety valve opening pressure?
3 Piston how will you guide?
4 Turbocharger water washing?
5 Turbocharger turbing cleaing?
9th February 2015
14th person
Internal: Gopikrishnan
Function 4b
1 Intercooler is not there in air compressor?
what are the consequences?
2 Unloader why in air compressor?
starting and stopping unloader is needed to reduce the load in the motor while starting
3 unloader is not functioning how will you come to know?
no dischare pressure
There is no pressure gauge what you will do?
compressor will run for a long time
motor amps wll be low
4 how piston and liner is lubricated in air compressor?
9th February 2015
12th person
Internal: Chowdry
Function 3
1 Low expansion foam, how it works?
2 Foam monitor and foam application?
3 On deck in middle there is an oil fire where there is no bulkhead, how will you extinguish?
4 where is isolaton valve fitted in low expansion foam?
Low expansion foam tank room
5 how green sea is avoided?

a free board
b camber
c sheer
d freeing ports
e flare
f scupper
6 which cargo are you carrying?
crude oil
7 crude oil washing why done, and why there is more chance of explosion during crude oil
washing?
8 why positive pressure in crude oil washing?
Date . 9 .02 . 2015
Fun applied .3
External .; chidambaram
Internal; gopi sir.
1. Type of ship sailed . product tanker.
2. Fixed fire fightingin your ship . co2 . asked bottle regulation.why time delay.weekly checks.co2
room entering procedure.. Why dip tube provided, and weight of co2 cylinder, and
calculations.and how to blow through with compressed air.
3.fixed fire fighting in deck . expansion ratio of foam ,why low expansion foam used in deck.
4. Freeboard and why tankers have less freeboard?
5. Free surface effect and effects of it.
6.sounding pipe safeties .wi it has to be closed?.
7. Sopep ? Immediate action taken wen oil spill on port?
8. Annexure 7 ?
9.clearances taken in rudder?
Internal.
1 . diff between life boat and rescue boat . hoisting and lowering speed?
2. Types of bulkheads?
3. Wat is swash bulkhead? Were and wi it is used.
Result .; pass
09/02/14
external: Chidambaram sir
fn : 4b and 6
anti polishing ring-purpose and where fitted
safety valve lifting pressure..is pr same for both v/v?
A/E safeties and alarms
how will you insert a piston?
types of stp
accumulation pressure test-hw to do and value??(10%)
purifier-oil in water side-reasons
stuffing box details-wat if top ring fails,sealing ring fails,lower ring fails
shell and tube-leak test

fwg efficiency poor


t/c waterwashing in detail
types of defrosting in refrigeration
safematic steering gear
deciding questions
internal: Chowdry sir
intercooler absent-wat ll b the consequences
compressor liner lubrication
purpose of unloader
if unloader is nt working hw will u knw??
sorry for posting late guys.this group helps us a lot..so pls pls keep posting so that we can
see...many r using watsapp,but watsapp has limited no. of ppl in ur group..so pls post in fb also
so dat every1 can see.pls.thank u..
9th February 2015
6th person
Internal: Gopikrishnan
External: Chidambaram
Function 3
1 Type of ship
chemical tanker
2 chemical tanker criteria marpol
3 duct keel, bilge keel?
4 life boat and rescue boat difference?
5 life boat lowering and hoisting speed?
6 rescue boat lowering and hoisting speed?
7 ism
8 isps?
9 Double bottom tank diagram
10 framing space?
11 what is bulkhead?
12 what is swash plate bulkhead?
Function 4b
1 accumulator pressure test?
2 Types of lubrication in auxiliary engine?
3 FWG workign principle?
Function 5
1 ICCP diagram? what voltage?
2 Welding transformer voltage and when you touch any metal what is the voltage?
3 battery maintenace?
4 reverse power trip?
9th February 2015
4th person
Internal: Gopikrishnan

External: Chidambaram
Function 3
1 fixed fire system in your engine room and deck?
2 dip tube purpose?
3 time delay purpose?
4 SOPEP plan purpose?
5 free surface effect
6 In port ship collision what you will do?
Put booms
7 Co2 discharge in engine room?
85% in 2 minutes
8 tare weight of cylinder?
9 weekly checks co2
low expansion ration(deck)
10 purpose of sounding tube?
a to maintain integrity of the ship
b to avoid overflow
c it is self closing and oil vapours should not come on deck and then enter the engine room area
11 Which is carrying the weight of the rudder?
Rudder carrier bearing
12 how will you check rudder drop?
9th January 2015
3rd person
Internal: Gopikrishnan
Function 3
1 pv valve purpose , pv breaker purpose and differece between them?
2 how will you fight economizer fire?
3 Annex 5, types of garbage in your ship?
4 Ism policy of your ship?
a safety of life
b zero accident
c zero pollution
d zero environmental pollution
e zero cargo damage
f zero marine incidence
Function 4b
1 auxiliary engine safeties?
2 what is your main engine critical speed?
3 scavenge fire?
4 after scavenge fire what and all checks you will do?
5 starting air line explosion?
6 exhaust gas economizere fire, how will you fight fire?

7 high expansion foam?


8 why high expansion foam is not used in deck?
9th February 2015
Internal: Gopikrishnan
1st person
Function 3
1 ISPS
2 LPG Safeties?
3 Pressure test of hatch cover?
4 stable and unstable ship?
how will you find ship is stable and unstable?
5 angle of loll?
6 sulphur content percentage?
7 working of DCP?
8 bulk DCP working satisfactorily or not?
9 nitrogen bottles how much in your ship?
10 ISPS?
11 cargo manifold fire, how will you extinguish?
12 Throught the length of the ship, how much nozzles are there?
13 fire plan?
Function 4b
1 scavenge space inspection?
2 engine reversed, how will you come to know?
3 auxiliary alarms and trips?
4
Function 5
1 transforemer safeties?
2 Singnificance of RMS?
3 what is impedence?
4 Difference between impedence and resistance?
5 brushless alternator diagram?
Function 6
1 how will you pressure test shell and tube heat exchanger?
2 Manual cold firing of boiler?
09/02/2015
Int. Gopi sir
Fun applied. 3,5,6
Fun3.
1.Co2 room weekly inspection
2.uses of bulbous bow
3.under annex5 wat r called Garbages
4.Types of bulkhead
5.Types of insulation of bulkhead

Fun5.
6.Parts of circuit breaker
7.MSB safeties
8.Loads connected to ESB
9.What is RMS value and its significance
10.Types of fuses
11.Neozed fuse where it is used
12.Short circuit trip working
Fun6.
13.Boiler manual starting from cold condition procedure
14.Tool used to fix safety valve
15.Fuel injector testing
16.When you discard the con.rod bolts
Result: Fun.5
09/02/2015
Internal: Gopi krishna
function 3:
what do u mean by unstable and stable ship
how to calculate COG of a ship and procedure stabilograph experiment
what type of fix fire fighting onboard(served on lpg ship).. answered dcp
how to extinguish manifold fire using dcp and how many monitors located across the deck
how would u make sure the dcp contained in bulk for deck fire fighting is working satisfactorily
ISPS
How to test for water leaks in hatch
Annex VI SOx
Function 4b:
Scavenge space inspection in detail
alarms and trips of AE
ref lo properties
material of piston rings and why
Function 5
RMS
Safeties in transformer
sketch and explain working of brushless genetrator and advantages
Function 6
boiler cold start manually
heat exchanger pressure test procedure
Result:4b
remember these many question.. will update after i recall the other questions he asked

You might also like