Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 203 views

    5 8 2016 SAG Mill Inspection

    Uploaded by

    anjas
    The SAG mill inspection on 5/08/2016 found the following: the ball charge was 12.1%, the mill was last relined on 1/06/2016 after processing 279,273 metric tonnes, and the feed head outer lifters, shell lifters, and discharge head outer lifters and grates were all in good condition. Craig Curtis from Tega conducted a mill scan and manual measurement. The inspection also found the trommel panels and all flights to be in good condition. It was recommended to regularly conduct mill scan analyses to model wear rates and predict liner change-out dates.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    5 8 2016 SAG Mill Inspection

    Uploaded by

    anjas
    203 views5 pages
    The SAG mill inspection on 5/08/2016 found the following: the ball charge was 12.1%, the mill was last relined on 1/06/2016 after processing 279,273 metric tonnes, and the feed head outer lifters, shell lifters, and discharge head outer lifters and grates were all in good condition. Craig Curtis from Tega conducted a mill scan and manual measurement. The inspection also found the trommel panels and all flights to be in good condition. It was recommended to regularly conduct mill scan analyses to model wear rates and predict liner change-out dates.

    Original Description:

    reyreh

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The SAG mill inspection on 5/08/2016 found the following: the ball charge was 12.1%, the mill was last relined on 1/06/2016 after processing 279,273 metric tonnes, and the feed head outer lifters, shell lifters, and discharge head outer lifters and grates were all in good condition. Craig Curtis from Tega conducted a mill scan and manual measurement. The inspection also found the trommel panels and all flights to be in good condition. It was recommended to regularly conduct mill scan analyses to model wear rates and predict liner change-out dates.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    203 views5 pages

    5 8 2016 SAG Mill Inspection

    Uploaded by

    anjas
    The SAG mill inspection on 5/08/2016 found the following: the ball charge was 12.1%, the mill was last relined on 1/06/2016 after processing 279,273 metric tonnes, and the feed head outer lifters, shell lifters, and discharge head outer lifters and grates were all in good condition. Craig Curtis from Tega conducted a mill scan and manual measurement. The inspection also found the trommel panels and all flights to be in good condition. It was recommended to regularly conduct mill scan analyses to model wear rates and predict liner change-out dates.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 5

    SAG Mill Inspection 5/08/2016

    Mill Inspection

    Ball charge 12.1%


    Milled tonnes from last reline

    Feed Head Inner and Outer lifters - 279,273 WMT last relined
    01/06/2016
    o Shell
    - 279,273 WMT last relined
    01/06/2016
    o Discharge Grates
    - 279,273 WMT last relined
    01/06/2016
    o Discharge Head Outer Lifters
    - 279,273 WMT last relined
    01/06/2016
    Feed head outer lifters and plates are in good condition.
    Shell lifters are in good condition.
    Discharge head outer lifters and grates are in good condition.
    Craig Curtis from Tega conducted a mill scan and manual measurement.
    o

    Figure 1 Feed Head outer lifters condition

    on
    on
    on
    on

    Figure 2 Shell lifters and liners condition

    Figure 3 Discharge Head outer lifters condition

    Trommel panels are in good condition.


    All flights are intact.

    Recommendations
    Mill

    Conduct mill scan analysis regularly to model and predict SAG mill liners wear
    rate and change out date.

    You might also like