Spek Alat

MODEL
DTR 8500
ELECTRICAL
Ratio Range
Auto-Ranging, 0.8000 to 1500.0:1
Accuracy*
Ratio <10 to 1: 0.2% of Reading
Ratio 10 to 1000 to 1: 0.1% of Reading
Ratio >1000 to 1: 0.2% of Reading

Excitation Signal
PT/VT Mode: 44Vrms maximum
CT Mode: 0 to 1A Auto Level, 0.1 to 5Vrms

Excitation Current Display
Range: 0 to 1000mA; Accuracy: 2% of Reading 2mA
Excitation Frequency
70Hz
Display
LCD Character, 20 x 2, large format, LED backlight, day/night visible
Measurement Method
In accordance with ANSI/IEEE C57.12.90
Power Source
Dual operation; rechargeable NiCD battery & 115/230V, 50/60Hz line supply.
DTR may be changed from 115/230V by internal switch at any time. Units available with factory presetting of 115 or 230V.
Batteries
12V, 5 x 2 NiCD packs, 1300mAH, Panasonic P-130SCR or equivalent
Battery Life
Up to 10 hrs continuous operation. May be used while recharging. Low battery LCD indication.
Charging Time
14 hrs typical, C/10 rate
Line Fuse
115V: 1.0A, 5 x 20mm, slow acting
230V: 0.5A, 5 x 20mm, slow acting

Displayed Measurements
Turns ratio; RMS excitation current; polarity
Displayed Messages
Incorrect lead connections; H/X reversal (accidental step-up misconnection);
Short (excess excitation current); Open circuits; Circuit continuity & low battery
MECHANICAL
Connections
Cannon XLR connectors and large color-coded industrial clips
Leads
15 ft, H x X color-coded, in carrying bag
Display
Dual line alpha-numeric 3.875 x 0.875" with contrast adjustment and backlight
Operating Temperature
32 to 122F (0 to 50C), 0 to 90% RH (without condensation)
Case
Heavy duty structural polypropylene (yellow)
Dimensions
13 x 12 x 6" (330 x 305 x 152mm)
Weight
14 lb (6.4kg)
Model Number
OC60D-*
OC90D-*
System Output
0 - 60kV
0 - 90kV
Meter Accuracy
2% of full scale
Dimensions (W x H x D)
16 x 13 x 15 in
30 x 12 x 17 in
(41 x 33 x 38 cm)
(76 x 30 x 43 cm)
Shipping Dimensions
24 x 19 x 21 in
30 x 20 x 20 in
(W x H x D)
(61 x 48 x 53 cm)
(76 x 51 x 51 cm)
Weight
NET
69lbs (31kg)
122lbs (55kg)
SHIPPING
74lbs (33.5kg)
190lbs (86kg)
Input Voltage &

* In the model number, designate 'A' for
Frequency
120V/60Hz input or 'B' for 230V/50 Hz input
Harmonized Tariff Code
9030.33.0040
Included Accessories
Input Chord (7.5ft/2.3m), Calibration Certificate,
Operations Manual
LTCA-10 technical specifications
physical
Dimensions: 21W x 17H x 9 D (53.0 cm x 43.0 cm x 24.0 cm)
input
100-240 Vac, 50/60 Hz
specifications
Weight: 33 lbs. (15.4 Kg)
power
resistance
1 micro-ohm 500 ohms
test
1 A, 5 A, and 10 A
reading range
currents
accuracy
1 19,999 micro-ohms: 0.5% reading, 1 count
resistance
three resistance reading channels,
20 999 milliohms: 1% reading, 1 count
channels
one dynamic resistance channel
1 500 ohms: 1.5% reading, 1 count
display
back-lit LCD screen (128 x 64 pixels)
test
60 Vdc max
viewable in bright sunlight and low-light levels
voltage
printer
built-in 4K wide thermal printer
ac current
clamp-on current sensor, 1 20 A
input
Windows-based software is included with purchase price
pc
software
100
internal test
data storage
stores up to 128 static resistance test records (48 tests per record) and 11
010
record storage
dynamic resistance test records
110
external
stores up to 999 test records on a USB flash drive (drive not included)
temperature
Operating: -10C to +50C (+15F to +122F)
Storage: -30C to +70C (-22F to +158F)
options
shipping case
cables
one 50' (15.2m) current cable set, three 50' (15.2m) resistance cable sets,
computer
one RS-232C port, one USB port, one USB
ground cable, USB cable, RS-232C cable, LTC cable, power cord, cable bag
interface
humidity
flash drive port
90% RH @ 40C (104F)
load tap changer

designed to meet IEC 61010 (1995), UL
non-condensing
contact
61010-a, and CAS-C22.2 standards
altitude
2,000 m (6,562 ft)
safety
designed to meet UL 61010A-1 and CAN/
to full safety specifications
CSA C22.2 No. 1010.1-92 standards
warranty
one year on parts and labor
NOTE : the above specifications are valid at nominal voltage and ambient temperature of +25C (+77F). Specifications are subject to change without notice.
Specifications
Range
Insulation resistance
Voltage measurement
500V
1000V
2500V
5000V
AC/DC V
Measuring
0.099.9M
0.099.9M
0.099.9M
0.099.9M
30600V
range
100999M
100999M
100999M
100999M
AC/DC
1.001.99G
1.009.99G
1.009.99G
(50/60Hz)
10.099.9G
10.099.9G
1001000G(1T)
Accuracy
5rdg3dgt
5rdg3dgt
5rdg3dgt
5rdg3dgt
2rdg3dgt
20(100Gor more)
Short Circuit Current
1.3mA approx.
Rated test Current

1mA to1.2mA
1mA to1.2mA
1mA to1.2mA
1mA to1.2mA
@0.5Mload
@1Mload
@2.5Mload
@5Mload
Open circuit voltage

500VDC+30
1000VDC+20
2500VDC+20
5000VDC+20
-0
-0
-0
-0
630 Counts
Maximum display
999 Counts(1000 counts only at 1000G)
Current consumption
About 1000mA(During measurement)
25mA approx.
Withstand Voltage
5320V AC for 5 seconds
Safety standard
IEC 61010-1 CAT.3 600V, pollution Degree 2
Power supply
DC12V : R148 pcs
Dimensions
205(L) 152(W) 94(D)mm
Weight
approx. 1.8kg
Accessories
LINE PROBE 7165
ALKALINE BATTERY SIZE C(LR148PCS)EARTH CORD 7166INSTRUCTION MANUAL
GUARD CORD 7164

HARD CASE : MODEL 9124
PICKEL TYPE PROD 8019
Measuring range
Best accuracy
Resolution
Resolution
DCV
400m/4/40/400/600V
(0.7%+3)
0.1mV
DCV: 10M100M
ACV
4/40/400/600V
(1.6%+9)
0.001V
ACV: 10M11M
DCA
40m/400mA
(2.2%+5)
0.01mA
ACA
40m/400mA
(2.8%+5)
0.01mA
Resistance
400/4k/40k/400k/4M/40M
(1.5%+5)
0.1
Capacitance
50n/500n/5/50/100F
(5.0%+10)
0.01nF
Frequency
5Hz100kHz
(0.5%+3)
Duty cycle
20%80%
(0.5%+5)
Continuity
Buzzer sounds at between 10 and 120 Open voltage: approx. 0.4V
Diode test
Open voltage: approx. 1.5V
Measuring method
- method
Display
4000 count
Range selection
Auto and manual ranges
Over display
"O.L" is displayed(except AC/DC 600V ranges)
Polarity
Automatic selection(only " - " is displayed)
Battery low warning
Battery(
) mark lights when the internal battery's power is below
approx. 2.4V
2 times / sec
Sampling rate
Operating temperature / humidity
540 / 531, 80%RH(Max)
-1050, below 70%RH No condensation
Storage temperature / humidity
Environmental condition
Altitude 2000m or below, pollution degree II
Power consumption
7mW at DCV
Continuous use time
About 150 hours at DCV
40400Hz
Bandwidth
Fuse / Battery
0.5A/250V 1.5kA 5.2x20mm / R6P x 2
Size / Mass
H176 x W104 x D46mm / 340g
Standard accessories included
Hand strap, Instruction manual

Spek Alat

Uploaded by

Copyright:

Available Formats

Spek Alat

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Spek Alat

Uploaded by

Copyright:

Available Formats

MODEL

Ratio 10 to 1000 to 1: 0.1% of Reading

Ratio >1000 to 1: 0.2% of Reading

CT Mode: 0 to 1A Auto Level, 0.1 to 5Vrms

230V: 0.5A, 5 x 20mm, slow acting

Input Voltage &

LTCA-10 technical specifications

20 999 milliohms: 1% reading, 1 count

1 500 ohms: 1.5% reading, 1 count

viewable in bright sunlight and low-light levels

Windows-based software is included with purchase price

Storage: -30C to +70C (-22F to +158F)

flash drive port

90% RH @ 40C (104F)

load tap changer

CSA C22.2 No. 1010.1-92 standards

Short Circuit Current

Rated test Current

Open circuit voltage

999 Counts(1000 counts only at 1000G)

About 1000mA(During measurement)

5320V AC for 5 seconds

IEC 61010-1 CAT.3 600V, pollution Degree 2

DC12V : R148 pcs

205(L) 152(W) 94(D)mm

GUARD CORD 7164

Buzzer sounds at between 10 and 120 Open voltage: approx. 0.4V

Open voltage: approx. 1.5V

Auto and manual ranges

"O.L" is displayed(except AC/DC 600V ranges)

Automatic selection(only " - " is displayed)

Battery low warning

Operating temperature / humidity

540 / 531, 80%RH(Max)

-1050, below 70%RH No condensation

Storage temperature / humidity

Altitude 2000m or below, pollution degree II

Continuous use time

About 150 hours at DCV

0.5A/250V 1.5kA 5.2x20mm / R6P x 2

H176 x W104 x D46mm / 340g

Standard accessories included

Hand strap, Instruction manual

You might also like