Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

PHD Proposal (Shwan Omar Ismael)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

Hydrogeology and Hydrochemistry of Shaqlawa

Area, Erbil Governorate - Northern Iraq

PhD Research Proposal by


Shwan Omar Ismail
Assistant Lecturer at Department of Soil and Water
MSc in Geology Science (Hydrogeology)
Manager of GIS Unit - Salahaddin University/Erbil

Date of Birth: March 01, 1975


Iraqi Citizenship
Telephone: +964 750 4487884
Email: shwanom2003@yahoo.com
Address: Hamreen Qr. 415, Alley 19, House no. 2, Erbil, Iraq

Table of Contents
Table of Contents ........................................................................................... 2
Introduction .................................................................................................... 3
Objectives ....................................................................................................... 3
Location and Morphology............................................................................... 3
Hydrology ... 5
Geology .. 5
Methodology ................................................................................................... 7
Software Application ...................................................................................... 9
Bibliography .................................................................................................... 9
Timetable ......................................................................................................... 9

Introduction
The increase of inhabitance and the establishment of agricultural
and industrial projects, the groundwater utilization became more
important for Erbil plain. In addition, the drought climatic condition has
affected the amount of the recharged water to the aquifers of the basin,
which in term shows a risk in exploitation of groundwater by its present
quantities.
The largest available source of fresh water lies underground. The
main recharge source of groundwater is precipitation. A portion of rain
falling on the earth's surface infiltrates into ground, travels down and
when checked by impervious layer to travel further down, forms
groundwater.
The study of chemical characteristics of groundwater is very
important for municipal, commercial, industrial, agriculture, and
drinking water supplies. Development provides opportunities for
pollution of groundwater and consideration must be given to the
protection of quality.
The chemical composition of water is based primarily on the
minerals which have dissolved in it. In addition, the chemical
composition of water is modified by ion-exchange equilibrium. There are
some environmental conditions affecting on the water chemistry such as
type of rock, climate, relief, vegetation and time.

Objectives
The main aims of this PhD Thesis are to:
1- Determine the water surplus and water deficit of the sub-basin and
related parameters such as runoff, recharge and other parameters of
water balance.
2-

Studying

hydromorphometric

analysis

and

its

effect

on

hydrogeological conditions on the area.


3- Studying the groundwater fluctuation of some wells in the study area.
4- Evaluating the type, extent, and potentiality of the aquifers.
5- Studying groundwater quality of Shaqlawa area including physical
and chemical properties, water type, hypothetical salts, origin of
water and hydrochemical indicators.
6- Determine the optimum policy to develop and investment of
groundwater resources in the area.

Location and Geomorphology:


The area located about 60 km NE of Erbil and is bounded several
mountains. The elevation ranges from 700-1500 m above sea level.
Shaqlawa basin lies within the high folded zone according to Buday and
Jassim (1987), Safin anticline border the sites from south and Mirawa
anticline from north, Safin anticline is large asymmetrical, double
plunging anticline (Figure 1). Pliocene and Quaternary deposit iron flat
Questa-Hogback, ride, cliff and badland are the most dominant
geomorphological erosion features, which mainly control by structural
and lithological properties, parallel type of drainage pattern are very
common.

Figure1:TopographicMapoftheStudyarea

Figure2:SatelliteImageoftheStudyarea

Hydrology
The main hydrogeological characteristics are resembled by annual
precipitation range between 800-1000 mm/year, many springs are
flowing in studied area, these springs are flow from Aqra-Bekhe and Pila
Spi Formations. The main source for these springs are related to aquifers
fissured, fissured-karstified rocks.

Geology
The following formations are exposed in the studied area:
1- Aqra-Bekhme Formation (Campanian-Maastrichtian)
This formation exposed at the body of Safin anticline core, its
characterized by refal limestone, fore-reef, shoal limestone and
associated facies.
The formation consist mainly of limesone and dolomite beds at lower
part, the limestone are grey and grayish brown in color, hard to very
hard, well bedded to massive, the thickness of massive limestone exceed
30 m the mddle part of the formation, but the thickness of layer in well
bedded limestone are range from (0.5-1.5 m).
The dolomite is light yellowish brown and grayish brown color,
very hard, very fine grained and rarely medium to coarse grain. The
depositional environment of Aqra-Bekhme formation is shallow tropical
marine reefal and fore reef.
2- Shiranish Formation (Maastrichtian)
This formation exposed at the foot of the Safin mountain around
the area, the formation consist of two part, the lower is limestone
frequently marly or clayey, with gray color and well bedded. This
limestone is partly fossilifirous, while other are micritic. Some joints and
fractures are commonly seen, sometime filled by clayey or calcareous
materials.

The upper part is composed of blue, gray marl and shale of papery
structure. Their lithotypes are rather soft, thus the upper part shows
more weathering than the lower part.
The thickness of the formation is about 100 m, the lower contact with
Aqra-Bekhme Formation is conformable, at field the contact defined by
the firs appearance of white limestone of Shiranish Formation.
3-

Tanjero Formation (Late Maastrichtian)

The formation exposed at the trough of the syncline, the formation


consist of clastic which dominate dark yellowish green and olive green
colors. Lithologically the formation is composed of sandstone, claystone,
shale and conglomerate, the sandstone that the main constituent is either
in form of beds or large concretion ball within claystone and shale, the
grain size of the sandstone is medium to coarse.

Conglomerate are as lenses consist of fine to coarse pebbles of silica


carbonate. The contact of the formation with underlying formation is
gradual and conformable.
4- Kolosh Formation (Paleocene-Early Eocene)
This formation exposed at NW and northern part of Shaqlawa,
consist of clastic rocks which are dark gray to black in color, some rare
brown or violet horizons also may occur. Lithologically the formation is
composed of shale, claystone, sandstone and siltstone.

The shale and claystone are soft papery and fragmented, the
mainly thick black or gray clayey soil. The sandstone are dark in color
fairly hard to friable, medium to coarse grained. The contact with the
underlying formation is unconformable (angular unconformity).
5- Khurmala Formation (Paleocene-Early Eocene)
Khormala Formation consist of limestone and marly limestone, the
limestone in yellow colored, hard, partly dolomitized well bedded and
lower part in some place are bituminouse, which gives the dark color to
limestone, the thickness of individual bed ranges between (0.5-2 m)
because they are overlain and underlain by soft materials the always
form ridges, the thickness of the formation is about 25 m.

6- Gercus Formation (Middle Late Eocene)


The formation consist of red clastic rock, which are mainly of
claystone, siltstone and sandstone, with a different layer of conglomerate
at upper part. The main rock type of this formation is the claystone
which is ridish brown, brown in color, soft and fragmentede to small
chipses, occasionally the claystone is silty and very rarely sand grains
could be seen.

The sandstone are less aboundant than the claystone and occur at
thin beds. The thickness of the formation is varies along Shaqlawa area,
at Sork mountain is about 110 m.

7- Pila Spi Formation (Late Eocene)


The formation forms continuous high ridges with very common
flat iron morphology, the formation consist mainly of limestone, which
are crystalline, dolomitic and clayey or chalky, the color is white creamy,
light gray and yellowish white, well bedded, the thickness of the
individual bed ranges from less than 0.4 m to 1.5 m, hard to very hard
occasionally the limestone is fossiliferous. Fossils are mainly
Foraminifera and Gastropods. The thickness of the formation is about 90
m, the lower contact is unconformable with Gercus Formation.

Methodology

The study of natural and contaminated ground-water systems by

PHAST program (simulates multi-component, reactive solute transport


in three-dimensional saturated ground-water flow systems. PHAST is a
versatile ground-water flow and transport simulator with capabilities to
model a wide range of equilibrium and kinetic geochemical reactions),
and simulating chemical reactions and transport processes in natural or
polluted water by PHREEQC program (based on equilibrium chemistry
of aqueous solutions interacting with minerals, gases, solid solutions,

exchangers, and sorption surfaces, but also includes the capability to


model kinetic reactions with rate equations that are completely userspecified in the form of Basic statements).
Groundwater samples will be taken from drilled wells for detailed
chemical analysis in two periods, the minimum recharge period
(drought) and maximum recharge period. In some wells more than one
sample will be taken for determination of accuracy of the analyzed data.
Bartram and Balance (1996).
The temperature, electric conductivity, and pH of the water
samples will be record at the site by the pH meter, Ec meter, and
thermometer instruments. The coordination of the wells will be record
by GPS instrument.
Determination the Infiltration rate of different lithology in the
study area by using the double ring method. The boundaries between
the formations will be indicate in the study area by studying the
lithological properties and the sedimentary environments to find out the
geological setting of study area.

All data from field and laboratory processes to create tabular and
graphics data such as geological data, GPS data drawing map,
simulation laboratory data on graph, drawing relationships between
different parameter to determine the origin of water, hydrogeochemical
formula, statical analysis to determine accuracy of the chemical analysis.
Preparation the Hydrological data of the wells and projected on the map.
Employed some specialized software such as GIS (Arc GIS, Arc info, Arc
catalog), MapInfo, Aquifer Test, SPSS, Graph Ground water, AutoCAD,
Surfer and Grapher.

Software Application
1- GIS and Remote Sensing: in hydrogeological modeling (predicts
water levels in rivers/lakes, rain water runoff, ground water
availability and better manage water levels) by using high
resolution satellite images of the study area.
2- Modflow program
3- Aquifer Test program
4- AutoCAD program

Bibliography
- Bartram, J., and Balance, R., 1996. Water Quality Monitoring. UNEP
and WHOE and FN Spon. London, UK.371p.
-Buday, T. Jassim, S. Z., 1987. The Regional Geology of Iraq (Stratigraphy
and Paleogeography). Vol. 2, 352 P.

Timetable

The scheduled time for the proposed PhD research is 3 years.

You might also like