Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    Procedure For Preparation of Water Hose Reel Data Sheet: Quality Management System Document

    Uploaded by

    m
    This document outlines the procedure for developing data sheets for water hose reels. It provides instructions for engineers to fill out the data sheets, including referring to applicable documents like the design basis, vendor data, and firefighting drawings. The general requirements specify that all listed documents must be available and the lead engineer is responsible for obtaining them. The data sheet is then reviewed, approved, and issued. An attachment includes a sample water hose reel data sheet.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Procedure For Preparation of Water Hose Reel Data Sheet: Quality Management System Document

    Uploaded by

    m
    61 views6 pages
    This document outlines the procedure for developing data sheets for water hose reels. It provides instructions for engineers to fill out the data sheets, including referring to applicable documents like the design basis, vendor data, and firefighting drawings. The general requirements specify that all listed documents must be available and the lead engineer is responsible for obtaining them. The data sheet is then reviewed, approved, and issued. An attachment includes a sample water hose reel data sheet.

    Original Description:

    sa

    Original Title

    PCD-SF-187

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the procedure for developing data sheets for water hose reels. It provides instructions for engineers to fill out the data sheets, including referring to applicable documents like the design basis, vendor data, and firefighting drawings. The general requirements specify that all listed documents must be available and the lead engineer is responsible for obtaining them. The data sheet is then reviewed, approved, and issued. An attachment includes a sample water hose reel data sheet.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    61 views6 pages

    Procedure For Preparation of Water Hose Reel Data Sheet: Quality Management System Document

    Uploaded by

    m
    This document outlines the procedure for developing data sheets for water hose reels. It provides instructions for engineers to fill out the data sheets, including referring to applicable documents like the design basis, vendor data, and firefighting drawings. The general requirements specify that all listed documents must be available and the lead engineer is responsible for obtaining them. The data sheet is then reviewed, approved, and issued. An attachment includes a sample water hose reel data sheet.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 6

    Quality Management System

    Document

    Doc. No.: PCD-SF187


    Page: 1 of
    Rev.: 1
    11

    Procedure for
    Preparation of Water Hose Reel Data
    Sheet

    1
    0
    Rev
    .

    24 May
    14
    15 Mar
    07
    Date

    Change of Format
    Issued for implementation
    Description

    H.Hosseini

    I.Zamani

    A. Fallahi

    Prepared by

    Reviewed
    by

    A.Zamani
    E.
    Behbahani
    Approved
    by

    Sections changed in the last revision are identified by


    This document is the property of Tehran Raymand Consulting Engineers and should not be disclosed or reproduced without a
    prior written permission.

    Procedure For
    Preparation of Water Hose
    Reel Data Sheet

    Doc. No.: PCD-SF187


    Rev.: 1

    Page: 2 of
    11

    1. Preface
    The present document is intended to outline the procedure for
    Development of Data
    Sheets for Water Hose Reel.
    This document, as a part of the quality management system, is under
    control and its latest revision will be issued to Tehran Raymand and its
    relevant organizational units.
    2. Applicable Documents
    The following documents have to be obtained by the Project Lead
    Engineer and referred to by the Engineer, prior to filling the data sheets:
    Design Basis

    Relevant Appendices of the Contract (if applicable)

    Vendor Data

    Blank Data Sheet in Project Format

    Design Criteria for Fire Fighting System


    A sample copy of the Data Sheets is attached in Attachment of the
    present document.
    3. Definitions
    Project Lead Engineer is the Lead Engineer directly responsible for the
    performance of activities of the project, set forth by the Project Manager
    and/or Head of the department.
    Engineer is the engineer responsible to fill out the Data Sheets under the
    direct supervision of the Project Lead engineer.
    4. Overview
    In order to assist the engineer, a set of step-wise instructions for filling
    the appropriate data into the Data Sheets are pointed out in the table in
    clause 6 of the present document. This table shows the relevant
    documents, which shall be referred by Engineer to prepare the Data
    Sheet.
    The data sheet is enclosed in Attachment of the present document.
    5. General Requirements
    For filling the Data Sheet, all documents which are listed in item No. 2
    shall be available.

    Procedure For
    Preparation of Water Hose
    Reel Data Sheet

    Doc. No.: PCD-SF187


    Rev.: 1

    Page: 3 of
    11

    The project Lead Engineer is responsible to obtain and ensure that the
    latest revision/edition of the mentioned documents are used by the
    Engineer.
    After filling the Data Sheet by Engineer, the Project Lead Engineer is
    responsible to thoroughly check and confirm the Data Sheet. This Data
    Sheet has to be final approved by Project Manager and/or Head of
    Department. Then the Data Sheet will be issued to relevant department.
    In case of any change in the data, Data Sheet has to be revised and
    reissued to the concerned department with a change request.

    6. Procedure
    The following instructions shall be used to fill in the Data Sheets:
    For project name and client name refer to Design Basis.
    For Doc. No. refer to Doc. Numbering procedure.
    Item No.

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16

    Data & Reference Document


    Recessed / non recessed and with
    cabinet or not as designer
    selection
    By vendor
    MTO for fire fighting & drawings
    Fire fighting
    Auto / manual with designer
    selection
    Fire fighting equipment layout &
    drawings
    NFPA-14. BS or others code & Std.
    in contract
    Painting spec. or Mfrr std.
    NFPA, BS or applicable std. in
    contract
    ITP document
    Whereas there is no freezing the
    wet standpipe to be considered
    Refer to fire fighting equipment
    layout
    Hydraulic calculation for pumps &

    Procedure For
    Preparation of Water Hose
    Reel Data Sheet
    Item No.
    17
    18

    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45

    Doc. No.: PCD-SF187


    Rev.: 1

    Data & Reference Document


    piping
    NFPA-14, class I 2 , II 1, 1 ,
    III 2 & 1 , fire fighting
    design criteria & designer
    judgment
    F/F equipment layout drawing
    By vendor
    By vendor
    C/S or S/S regarding to ambient
    corrosion
    1.5 mm for C/S and 1 mm for S/S
    Swinging or fixed by designer
    judgment
    90 or 180 Deg. For swinging and
    zero for fixed type
    C/S or S/S regarding to ambient
    corrosion
    Equal or more then item 19
    Thread type
    Manufacturer std.
    Manual or motorized, designer
    selection on providing and cost
    Will be used for fixed hose reel
    Stand alone or wall mounted
    C/S, S/S, GRP regarding to
    atmosphere corrosion
    C/S, S/S, GRP regarding to
    atmosphere corrosion
    1.5 m for C/S and 1 mm for S/S
    Designer selection
    4 Stands, one column, wall bracket
    see item 37
    C/S, S/S or GRP
    Is applicable for hose reels with
    cabinet
    Designer selection
    Flexible or non collapsible depends

    Page: 4 of
    11

    Procedure For
    Preparation of Water Hose
    Reel Data Sheet
    Item No.
    46
    47
    48

    49

    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61

    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    72

    Doc. No.: PCD-SF187


    Rev.: 1

    Data & Reference Document


    on designer decision
    By vendor
    MTO for F/F equipment, F/F
    drawings
    Water
    Synthetic woven textile, internal
    lining & external coating for
    ambient contamination
    Usually 25 MT or based on owner
    regulations but not more than 30
    m
    1, 1 , 1 , 2 as item 19
    Shall be selected above Nor./Max.
    Pressure of fire water network
    By vendor
    By vendor
    Instantaneous BS-336, storz thread
    or as owner regulation
    Bronze alloy
    Water nozzle, constant/variable
    flow as designer decision
    By vendor
    One per each
    Water
    Depends on hose diameter, for 1
    App.200 LPM. 1 & 1
    App.450, 2 App.950 LPM
    Shall be above network pressure
    By vendor
    By vendor
    By vendor
    Alum., bronze, plastic & light alloy
    as designer selection
    Same & mate to item 56
    Yes unless be used for live Elec.
    Appliances
    Manual or motorized, designer
    selection on providing and cost
    Yes
    Yes, unless nozzle have separate

    Page: 5 of
    11

    Procedure For
    Preparation of Water Hose
    Reel Data Sheet
    Item No.

    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83
    84
    85
    86
    87
    88
    89
    90
    91
    92

    Rev.: 1

    Data & Reference Document


    isolating valve
    Is special provision with designer
    judgment
    By vendor
    By vendor
    Gate, globe or ball valve but
    usually globe to be used
    Matching to item 52
    Bronze alloy unless exist special
    requirement for corrosion
    Thread or flanged and size same as
    item 28
    Mate to item 56
    By vendor
    By vendor
    By vendor
    By vendor
    Special requirement shall be given
    Simple sketch including said
    components shall be given
    -

    7. Attachments

    Doc. No.: PCD-SF187

    Water Hose Reel Data Sheet

    Page: 6 of
    11

    You might also like