Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Design of Base Plate and Bolts Final

    Uploaded by

    Manoj Jaiswal
    This document provides the design calculations for a base plate connection between a steel column and concrete foundation. It includes: - Dimensions of the steel column and requirements for the base plate such as minimum edge distances. - Calculations to determine the required size of the base plate based on the loads from the column and permissible bearing stress of the concrete. - Determination of required plate thickness on the compression and tension sides including additional stiffeners. - Sizing and number of bolts required to resist tension and shear loads as well as calculating the necessary embedment length of the bolts into the concrete. - Summary of the final base plate size of 400mm x 300mm x 22mm

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Design of Base Plate and Bolts Final

    Uploaded by

    Manoj Jaiswal
    2K views4 pages
    This document provides the design calculations for a base plate connection between a steel column and concrete foundation. It includes: - Dimensions of the steel column and requirements for the base plate such as minimum edge distances. - Calculations to determine the required size of the base plate based on the loads from the column and permissible bearing stress of the concrete. - Determination of required plate thickness on the compression and tension sides including additional stiffeners. - Sizing and number of bolts required to resist tension and shear loads as well as calculating the necessary embedment length of the bolts into the concrete. - Summary of the final base plate size of 400mm x 300mm x 22mm

    Original Description:

    Base Plate Design

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the design calculations for a base plate connection between a steel column and concrete foundation. It includes: - Dimensions of the steel column and requirements for the base plate such as minimum edge distances. - Calculations to determine the required size of the base plate based on the loads from the column and permissible bearing stress of the concrete. - Determination of required plate thickness on the compression and tension sides including additional stiffeners. - Sizing and number of bolts required to resist tension and shear loads as well as calculating the necessary embedment length of the bolts into the concrete. - Summary of the final base plate size of 400mm x 300mm x 22mm

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views4 pages

    Design of Base Plate and Bolts Final

    Uploaded by

    Manoj Jaiswal
    This document provides the design calculations for a base plate connection between a steel column and concrete foundation. It includes: - Dimensions of the steel column and requirements for the base plate such as minimum edge distances. - Calculations to determine the required size of the base plate based on the loads from the column and permissible bearing stress of the concrete. - Determination of required plate thickness on the compression and tension sides including additional stiffeners. - Sizing and number of bolts required to resist tension and shear loads as well as calculating the necessary embedment length of the bolts into the concrete. - Summary of the final base plate size of 400mm x 300mm x 22mm

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    PROJECT

    PROJECT No.

    DESCRIPTION

    PAGE

    OF

    PREPARED BY

    DATE

    CHECKED BY

    DATE

    (RHS to Base Plate Connection)

    Design of base plate for Axial Load and Moment

    MULS =
    VULS =
    NULS =

    Ultimate Bending Moment


    Utimate shear load on plate
    Utimate axial load on plate
    Steel column: 250x150x9 RHS
    Width of 'RHS' column
    Depth of 'RHS' column
    minimum edge distance for bolts
    c/ c distance between bolts 'h'
    Length of Base plate
    Width of Base Plate

    bf
    d
    k
    h
    hp
    Bp

    45.724 kNm
    17.6 kN
    -0.39 kN

    =
    =
    =
    =
    =
    =

    fcu =

    Grade of concrete
    Permissible Bearing stress in concrete (0.6*fcu)

    150
    250
    37.5
    300
    400
    300

    mm
    mm
    mm
    mm
    mm
    mm

    32

    Mpa

    19.2

    Mpa

    With the trial plate dimensions chosen above and as per the
    Permissible bearing stress in concrete, the equilibrium eqation is:

    Bp

    Try x

    LHS
    45724000

    27.72
    =

    mm
    RHS
    45725873

    LHS equals RHS


    OKAY

    =
    =

    Compressive Force
    Tensile Force
    i)

    C = 0.6* Fcu*Bp*x
    T = C - NULS

    =
    =

    159.6672
    160.054

    kN
    kN

    Base Plate thickness for Compression Side Bending:


    sw
    sw

    =
    =

    weld size for column to base plate welding


    mm .say
    6

    e
    e

    =
    =

    L1- 0.8*sw
    70.2

    mc =
    =
    mc =

    mm

    moment per mm width applied to plate stress block


    0.6* fcu * x * (e - x/2)
    0.0299855 kNm
    fy =

    Grade of steel.

    250

    Mpa
    Pressure below the Base plt (Comp side)

    tp

    21.904 mm

    PROJECT

    PROJECT No.

    DESCRIPTION

    PAGE

    ii)

    OF

    PREPARED BY

    DATE

    CHECKED BY

    DATE

    Base Plate thickness for Tension Side Bending:


    sw
    sw

    =
    =

    weld size for column to base plate welding


    6
    mm .say

    =
    =
    =

    clear distance between wled and bolts


    L1 - k -( 0.8*sw)
    32.7
    mm

    mc =
    =
    mc =
    tp

    moment per mm width applied to plate stress block


    T*m
    5.23

    Provide

    kNm
    =

    22

    16.707 mm

    mm thick base plate.

    Required base plate dimensions as per design are :

    hp =
    400 mm
    Bp =
    300 mm
    tp =
    22 mm
    Thus, base plate size required is 400mm x300mm x22mm mini thickness w/o stiffners
    However providing maximum plate thickness = 16 mm, hence need to provide plate stiffners for reducing the
    effect of bending.
    STIFFNERS:
    Provide 8 mm thick stiffner plates, triangular in shape, around the RHS column. 2 stiffners at Long face 250 mm and 1
    stiffner at short face 150 mm, each side.
    Weld Design : Connect 8mm thick stiffner plate to RHS column and Base plate w/ 6mm fillet weld at each
    face.
    6mm Fillet
    Weld

    PROJECT

    PROJECT No.

    DESCRIPTION

    PAGE

    OF

    PREPARED BY

    DATE

    CHECKED BY

    DATE

    Design of Holding down bolts


    Calculation of number of bolts:
    Diameter of bolt
    =
    16 mmtry
    Grade of bolt to be used
    :
    8.8
    Capacity of bolt in Tension
    =
    104 kN.threads included
    Capacity of bolt in Shear
    =
    59.3 kN.threads included
    (Ref from Steel Designers Handbook)
    Total tensile force on tension side bolts
    Total shear force on tension side bolts
    No. of bolts reqd to resist Tension Force
    ##
    No. of bolts reqd to resist Shear Force

    Provide

    160.05 kN
    17.6 kN

    =
    =
    =

    1.5 no's

    4 no's

    4 bolts on either side of column for bending @ major axis.

    Actual tension in each bolt


    Actual shear in each bolts

    =
    =

    40.01 kN
    4.397 kN

    Combined check for Tension + Shear :


    Vactual

    Tactual
    +
    Tpermissible

    Provided number of bolts are OK


    =

    0.4589

    <

    Vpermissible

    Calculation of Embedment length 'L' of bolts:


    ^0.5
    Mpa Permissible Ultimate bond stress of concrete 0.33*(fcu)

    fbu =

    1.86676

    fbu =

    T
    *boltdia*L

    Thus,

    426.65 mm

    Minimum
    430.0
    mm embedment length in concrete is required.
    However a separate Hilti design calcs run is carried out and attached below with final recommendations for
    Anchor design

    PROJECT

    PROJECT No.

    DESCRIPTION

    PAGE

    OF

    PREPARED BY

    DATE

    CHECKED BY

    DATE

    You might also like