4-Channel: Professional Power Amplifiers

CX4-channel
Professional Power Amplifiers

CX254 | CX404 | CX204V
All models include an

integrated security cover for
tamper-proof installations
The 4-channel CX amplifiers give you four
Features
channels in only two rack spaces, without
Three models that range in power from 170 watts to 450 watts per channel
compromising on power. Choose from three
Compact size all models only 2 RU and 14" deep for reduced rack cost and floor space
models, a direct 70 volt model and two low-
Channels 1&2 and 3&4 bridgeable for maximum flexibility
impedance versions. Each model is equipped
Active Inrush Limiting eliminates AC inrush current, removing the need for expensive
power sequencers
with exclusive QSC PowerLight switching
HD15 DataPort connector for QSControl computer control
power supply technology to virtually eliminate
Custom integrated security cover for tamper-proof installations
noise and hum.
Variable speed fan for low noise
With high-output power,
versatile loading options, high-thermal capacity
1 dB detented gain controls for fast and accurate gain settings
and unmatched reliability, the CX Series is the
Detachable Euro-style input connectors
perfect solution to any permanently installed
DIP switch control for clip limiters, high-pass filters, bridge-mono and parallel operation
sound system.
Exclusive PowerLight switch-mode power supply technology for high performance and
compact size
S
electable high-pass filters protect speakers and prevent speaker transformer saturation
with minimal effect on program material (33 Hz or 75 Hz on CX254 and CX404, 50 Hz or
75 Hz on CX204V)
CX 4-channel Amplifiers
C
omprehensive front panel indicators including signal, clip, protect and QSCs exclusive
bridge-mono and parallel input LEDs

Model
70V
Watts per channel

8
4
CX254
170
250
450*
CX404
250
400**
C
omprehensive protection circuitry including DC, infrasonic, thermal overload and short
circuit protection
CX204V
200
High-performance Class AB+B complementary bipolar output circuitry
20 Hz 20 kHz, 0.05% THD

*1
kHz, 1% THD
**1 kHz, 0.1% THD
Barrier strip output connector
Lightweight all models only 21 pounds (9.5 kg) for easier racking and shipping
3-year warranty plus optional 3-year extended service contract
CX4-Channel

Stereo Mode (all channels driven)

8 / 20 Hz 20 kHz / 0.05% THD

4 / 20 Hz 20 kHz / 0.05% THD

2 / 1 kHZ / 1% THD

70V / 20 Hz 20 kHz / 0.05% THD

70V / 1 kHz / 0.05% THD

70V / 1 kHz / 1% THD
Bridge-Mono Mode

16 / 20 Hz 20 kHz / 0.1% THD

8 / 20 Hz 20 kHz / 0.1% THD

4 / 1 kHz / 1% THD

140V / 20 Hz 20 kHz / 0.1% THD

140V / 1 kHz / 0.05% THD

140V / 1 kHz / 1% THD
Noise (20 Hz - 20 kHz)
Input Sensitivity
Gain
Input Clipping
Output Circuitry
Distortion (SMPTE-IM)
Distortion (typical)

20 Hz 20 kHz: 10 dB below rated power

1.0 kHz and below: full rated power
Frequency Response
Damping Factor
Input Impedance
Cooling
Connectors

Controls

Indicators

Amplifier Protection
Load Protection
Dimensions (HWD)
Weight - Net / Shipping
Power Requirements
120V Current Consumption*
Idle

1/8 power pink noise
8
of program material at
(typical
4
maximum unclipped power)

2

70V

1/3 power pink noise
8
(typical of program material
4
with severe clipping)

2

70V
* Multiply currents by 0.5 for 230V units
Specifications
CX254
170 W
250 W
450 W

340 W
500 W
900 W

-106 dB
1.22 Vrms
29 dB at 8
10 Vrms (+22 dBu)
Class AB+B
< 0.01%
CX404
Continuous average output power per channel
250 W
400 W (0.1% THD, 1 kHz)

Bridge-mono mode operation
500 W
800 W (0.1% THD, 1 kHz)

-106 dB
1.22 Vrms
31 dB at 8
10 Vrms (+22 dBu)
Class AB+B
< 0.01%
CX204V
200 W
220 W
300 W
400 W
440 W
600 W
-105 dB
1.26 Vrms
35 db at 70.7V
10 Vrms (+22 dBu)
Class AB+B
< 0.02%
< 0.01% THD

< 0.01% THD
20 Hz - 20 kHz, 0.2 dB | 8 Hz - 50 kHz, + 0/-3 dB
> 500 (1 kHz and below)
6k ohms unbalanced, 12k ohms balanced
Variable-speed fan/rear-to-front air flow through tunnel heat sink
Input: 3 position Euro style detachable barrier block, CH 1, 2, 3 & 4 DataPort: HD-15 Connector, Ch 1+2, Ch 3+4
Output: Six-position barrier strip with dual channel and bridge mono connections, Ch 1+2, Ch 3+4
Front: AC swith, Ch 1, 2, 3 & 4 gain knobs
Rear: DIP switch for Ch 1, 2, 3 & 4, clip limiter on/off, LF filter on/off, LF filter freq select 33 Hz or 75 Hz
CX254 and CX 404: 50 Hz or 75 Hz CX204V: inputs parallel or stereo, bridge mode
Parallel Inputs: Yellow LED / Bridged: Yellow LED/ Power-on: Green LED
Clip-Prot: Red LED / Level -10dB: Green LED / Level -20dB: Green LED / Signal -35dB: Green LED (1 per channel)
Full short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads
On/off muting, DC-fault power supply shutdown
3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails
21 lb (9.5 kg) / 27 lb (12.3 kg)
100, 120, 230 VAC, 50 60 Hz (configured at factory)
0.7 A
0.7 A
0.8 A
5.8 A
8.1 A
9.2 A
12.4 A
14.3 A
NR

8.3 A
8.8 A
12.2 A
14.2 A
19.3 A
21.7 A
NR

12.7 A
Specifications subject to change without notice.

QSC, the QSC logo and PowerLight are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries.
All other trademarks are the property of their respective owners. Patents may apply or be pending.
1675 MacArthur Boulevard Costa Mesa, CA 92626 Ph: 800/854-4079 or 714/957-7100 Fax: 714/754-6174
CX 4-channel Spec Sheet - 06/04/08
qscaudio.com

4-Channel: Professional Power Amplifiers

Uploaded by

Copyright:

Available Formats

4-Channel: Professional Power Amplifiers

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4-Channel: Professional Power Amplifiers

Uploaded by

Copyright:

Available Formats

CX4-channel

Professional Power Amplifiers

All models include an

The 4-channel CX amplifiers give you four

channels in only two rack spaces, without

compromising on power. Choose from three

models, a direct 70 volt model and two low-

Channels 1&2 and 3&4 bridgeable for maximum flexibility

impedance versions. Each model is equipped

with exclusive QSC PowerLight switching

HD15 DataPort connector for QSControl computer control

power supply technology to virtually eliminate

Custom integrated security cover for tamper-proof installations

noise and hum.

Variable speed fan for low noise

With high-output power,

versatile loading options, high-thermal capacity

1 dB detented gain controls for fast and accurate gain settings

and unmatched reliability, the CX Series is the

Detachable Euro-style input connectors

perfect solution to any permanently installed

Watts per channel

High-performance Class AB+B complementary bipolar output circuitry

20 Hz 20 kHz, 0.05% THD

Barrier strip output connector

< 0.01% THD

Specifications subject to change without notice.

You might also like

Channels 1&2 and 3&4 bridgeable for maximum flexibility

High-performance Class AB+B complementary bipolar output circuitry