Corning Glass Catalog

LE
B R AT I N
G
CE
Corning Glassware and Equipment Catalog
PYREX
9
YEAR
Contents
O R D E R I N G I N F O R M AT I O N . . . . . . . . . . . . . . Back Cover
REUSABLE GLASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
DISPOSABLE GLASS . . . . . . . . . . . . . . . . . . . . . . . . . 67
E Q U I PM E N T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Corex, Corning, PYREX, PYREXPLUS, Pyroceram, and Rotaflo are registered trademarks of Corning Incorporated, Corning, NY.
Discovering Beyond Imagination, Flame of Discovery design, Lifetime Red, Steri-View, and Scholar are trademarks of
Corning Incorporated, Corning, NY.
Noryl is a registered trademark of General Electric Corporation, Schenectady, NY.
ProCulture and Shur-Loc are registered trademarks of Lab Glass, Inc., Vineland, NJ.
Tekmar is a registered trademark of Tekmar Company, Rosemount Analytical Inc., Cincinnati, OH.
Teflon and Viton are registered trademarks of E.I. Dupont DeNemours, Wilmington, DE.
Tygon is a registered trademark of Norton Co.
Corning Incorporated, One Riverfront Plaza, Corning, NY 14831-0001
REUSABLE GLASS
Reusable Glass
ADAPTERS
8821 PYREX Brand, Adapter
One end with a ground joint and the other end tooled to accommodate a thermometer. The
adapter is supplied complete with a rubber thermometer holder, Cat No. CLS7715.
Cat. No.
CLS882114
CLS882119
CLS882124
Joint Size
Approx. Length (mm)
14/20
19/22
24/40
Qty/Cs
60
57
80
1
1
1
*This tube is also a replacement part for all Corning organic chemistry kits Cat. Nos. CLS6949 through CLS6949K.
8930 PYREX Brand, Connecting, Distilling,
Joints
With full-length inner joints of same size. The connecting arm is approximately at a 75
angle from vertical and is 200 mm. long.
Cat. No.
CLS893024
Approx. O.D. (mm)
Inner Joint Size
22
Qty/Cs
24/40
8947 PYREX Brand, Vacuum, Connecting, 105 Angle,
Joints
With tubulation of 10 mm O.D. for attaching to a vacuum pump or to inner and outer
Includes a drip-tip on the inner tube.
Cat. No.
Inner and Outer Joint Size
CLS894719
joints.
Qty/Pk
QtyCs
19/22
*These tubes are also replacement parts for organic chemistry kits Cat. Nos. CLS6949E, CLS6949G2, and CLS6949K.
9000 PYREX Brand, Connecting, 75 Angle, Three-Way,
Joints
The sidearm is at an angle approximately 75 from the lower joint. The lower end and sidearm
are equipped with inner joints, and the upper end with an outer joint. All joints on each
tube are of the same size.
Cat. No.
CLS900014
CLS900019
Inner and Outer

Joint Size
14/20
19/22
Approx.
Length (mm)
Qty/Pk
QtyCs
105
105
1
1
*These tubes are also replacement parts for organic chemistry kits Cat. No. CLS6949E, CLS6949G2, and CLS6949K.
9040 PYREX Brand, Connecting, Claisen type, Three-Way,
Joints
With outer joints at the upper end and on the parallel sidearm. With inner
lower end. All joints on each tube are of the same size.
Cat. No.
CLS904024
Inner and Outer

Joint Size
24/40
Approx.
Length (mm)
joint at the
Qty/Cs
160
9050 PYREX Brand, Connecting, Claisen Type, Three-Way,
Joints
A three-way tube with two outer and one inner joint of the same size.
Cat. No.
CLS905019
Inner and Outer

Joint Size
19/22
Approx.
Length (mm)
Qty/Cs
123
*This tube is also a replacement part for organic chemistry kits Cat. Nos. CLS6949E, CLS6949G2, and CLS6949K.
Visit www.sigma-aldrich.com/equipment for additional product and technical information.
REUSABLE GLASS
BEADS
7268 PYREX Brand, Solid Glass
Useful as packing for distillation columns, mixing beads and boiling stones. Beads are packaged in
0.45 kg. (1 lb.) boxes, which have a packing volume of approximately 360 cm3 or 22 cubic inches.
Cat. No.
Approx.
Diam. (mm)
Avg.
Count (Lb)
Diam. Tolerance
( mm)
Qty/Pk
Qty/Cs
3
4
5
6
13,600
5,700
3,000
1,700
.75
.75
.75
.75
1
1
1
1
4
4
4
4
CLS72683
CLS72684
CLS72685
CLS72686
BEAKERS
1000 PYREX Brand, Griffin, Low Form, Double Scale, Graduated
Beaker, with spout, manufactured with uniform wall thickness, offers optimum balance between
thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL
beakers have a double graduated metric scale to indicate approximate content. All sizes have an
extra large marking spot. The 10 mL size is not graduated.
Capacity
(mL)
Cat. No.
CLS100010
CLS100020
CLS100030
CLS100050
CLS1000100
CLS1000150
CLS1000250
CLS1000400
CLS1000600
CLS1000800
CLS10001L
CLS10001XL
CLS10002L
CLS10003L
CLS10004L
CLS1000PACK*
Graduation
Range (mL)
10
20
5-15
30
5-25
50
10-40
100
20-80
150
20-140
250
25-200
400
25-325
600
50-500
800
50-750
1000
50-1000
1500
200-1400
2000
200-2000
3000
250-2500
4000
500-3500
Assortment Pack
Approx. O.D. x
Height (mm)
Graduation
Interval (mL) Qty/Pk
25 x 32
32 x 40
35 x 53
42 x 56
50 x 72
57 x 86
68 x 90
77 x 110
90 x 124
98 x 135
108 x 158
121 x 166
131 x 193
146 x 216
160 x 250
5
10
10
10
10
25
25
50
50
50
100
100
125
250
12
12
12
12
12
12
12
12
6
6
6
4
4
1
1
5
Qty/Cs
48
48
48
48
48
48
48
48
36
24
24
16
8
6
6
1 set
*A convenience pack containing one each of the most popular sizes of 1000 beaker. Designed for the low volume user, a case contains
one each of five sizes; 50 mL, 100 mL, 250 mL, 600 mL and 1L. Packaged in a partitioned carton for safe transit and storage.
Reference: ASTM E-960.
1003 PYREX Brand, Griffin, Heavy Duty, Graduated

Heavy duty beakers specifically designed to offer the best mechanical strength under harsh conditions, such as mechanized washing operations. For convenience, the 250 through 4000 mL beakers
have a double graduated metric scale to indicate their approximate content. All sizes have an extra
large marking spot.
Cat. No.
CLS1003150
CLS1003250
CLS1003400
CLS1003600
CLS10031L
CLS10032L
CLS10034L
Capacity
(mL)
Graduation
Range (mL)
Approx. O.D. x
Height (mm)
Graduation
Interval (mL)
Qty/Pk
Qty/Cs
150
250
400
600
1000
2000
4000
20-140
25-200
25-325
50-500
50-1000
200-1800
500-3500
57 x 86
68 x 90
77 x 110
90 x 124
108 x 156
131 x 180
160 x 250
20
25
25
50
50
200
250
12
12
12
6
6
4
1
48
48
48
36
24
8
4
REUSABLE GLASS
1005 PYREX Brand, Griffin, Low Form, Double Scale, Graduated, Student Grade
Student grade, economy beaker with spout, manufactured with uniform wall thickness. It offers
optimum balance between thermal shock resistance and mechanical strength. For convenience, the
250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content.
All sizes have a large triangular marking spot.
Cat. No.
CLS100550
CLS1005100
CLS1005150
CLS1005250
CLS1005400
CLS1005600
CLS1005800
CLS10051L
Capacity
(mL)
Grad.
Range (mL)
Grad.
Interval (mL)
Approx. O.D. x
Height (mm)
Qty/Cs
50
100
150
250
400
600
800
1000
10-40
20-80
20-140
25-200
25-325
50-500
50-750
50-1000
10
10
10
25
25
50
50
50
42 x 56
50 x 72
57 x 82
68 x 90
77 x 110
90 x 124
98 x 135
108 x 158
12
12
12
12
12
6
6
6
For beaker cover, See Cat. No. CLS9985.

1010 PYREX Brand, Handle

A sturdy, molded glass handle is secured to this beaker by a stainless steel strap which fits into a
recess in the beaker wall. Hot liquids can be handled easily and safely.
Cat. No.
Description
Capacity (mL)
Approx. O.D. x Height (mm)
Qty/Pk
Qty/Cs
CLS1010
CLS1010BO
Complete
Beaker Only
3000
3000
155 x 213
155 x 213
1
1
8
8
1060 PYREX Brand, Berzelius, Tall Form, with Spout, Graduated

A tall beaker with spout to facilitate pouring. For convenience, these beakers are graduated to
indicate their approximate content.
Cat. No.
CLS1060100
CLS1060200
CLS1060300
CLS1060400
CLS1060500
CLS1060600
CLS10601L
Capacity
(mL)
Grad.
Range (mL)
Approx. O.D. x
Height (mm)
Grad.
Interval (mL)
Qty/Pk
Qty/Cs
100
200
300
400
500
600
1000
20-80
25-150
25-250
25-325
50-450
50-550
50-950
50 x 79
56 x 102
64 x 118
69 x 127
75 x 136
79 x 152
89 x 187
10
25
25
25
50
50
50
12
12
12
6
6
6
6
48
48
48
36
30
24
18
For beaker cover, See Cat. No. CLS9985.

B OT TL E S
1220 PYREX Brand, Aspirator, Outlet for Tubing
A range of bottles featuring a tubular sidearm outlet to facilitate attachment of flexible tubing.
Useful as a delivery/storage container for solutions.
Cat. No.
CLS1220250
CLS1220500
CLS12201L
CLS12202L
CLS12204L
CLS12202X
CLS12203X
CLS12205
Capacity
(mL)
Rubber
Stopper No.
Approx. O.D.
of Outlet (mm)
Approx. Diam. x
Height (mm)
Qty/Pk
Qty/Cs
250
500
1000
2000
4000
9500
13250
19000
2
4
6
6
10
12
12
12
10
10
10
15
13
13
13
13
70 x 132
86 x 164
107 x 200
133 x 250
165x 298
187 x 476
238 x 445
292 x 508
6
6
1
1
1
18
12
6
6
4
1
1
1
REUSABLE GLASS
61220 PYREXPLUS Brand, Aspirator, Protective Coating,* Outlet for Tubing

Bottle has a protective PVC coating for longer product life and safety. Protective coating helps
prevent glass from shattering and reduces spills. Autoclavable (121C) and resistant to thermal
shock. Bottle features a tubular sidearm outlet for attachment of flexible tubing. The tubulation is
not coated to allow easy connection of standard size tubing.
Cat. No.
CLS612204L
Capacity
(mL)
Rubber
Stopper No.
Approx. O.D.
of Outlet (mm)
Approx. Diam. x
Height (mm)
Qty/Pk
Qty/Cs
4000
10
12.5
165 x 298
Do not place over direct heat or flame. Do not heat above 121C moist heat or 110; dry heat.
*Covered by U.S. Patent #4940613.
1260 PYREX Brand, Centrifuge, Heavy Wall

For use where relatively small amounts of solids are involved. These bottles have a small bottom
area, which permits concentration of sediment for decanting operations. Due to the heavy wall,
the actual capacity is approximately 85% of the capacity listed.
Cat. No.
CLS1260250
CLS1260500
Capacity
(mL)
Rubber
Stopper No.
Approx. Diam. x
Height (mm)
Qty/Pk
Qty/Cs
250
500
6
6
60 x 143
73 x 175
12
6
The 250 mL fits IEC #384, the 500 mL fits IEC #353.
1261 PYREX Brand, Centrifuge, Heavy Wall, Screw Cap

Particularly useful in handling sputum specimens. This bottle enables digestion, shaking, neutralizing and centrifuging to be performed in one container. The tight-fitting polypropylene screw cap
with Teflon liner reduces the possibility of aerosol escape.
Cat. No.
CLS1261200
CLS1261CO
Capacity
(mL)
Approx.
Diam. x Height (mm)
G.P.I.
Thread Finish
Qty/Pk
Qty/Cs
200
60 x 141
Cap Only, White
38 x 400
38 x 400
12
1
1285 PYREX Brand, Blake Culture, Rectangular

This bottle is convenient for growing mass cultures. Made with tool-finished neck for increased
strength and uniform stopper fit. Will withstand repeated sterilization (wet or dry).
Cat. No.
CLS12851L
Capacity
(mL)
Rubber
Stopper No.
Approx. Cross
Section (mm)
Approx.
Height (mm)
Qty/Cs
1000
64 x 95
271
1290 PYREX Brand, Roux Culture, Offset Neck

This bottle is designed so that when laid flat, it will hold approximately one-half of the stated
capacity of solution. Offset neck is tool-finished for increased strength and uniform stopper fit. It
is useful for growing mass cultures and single or monolayer cultures. Will withstand repeated
sterilization (wet or dry). Bottle stacks for easy storage.
Cat. No.
CLS12901L
Capacity
(mL)
Approx. Cross
Section (mm)
Approx.
Height (mm)
Qty/Cs
1000
57 x 122
269
18
1295 PYREX Brand, Povitsky, Diphtheria Toxin

These rectangular bottles are designed for general tissue culture work or preparation of diphtheria
toxin. Offset tooled neck has increased strength and uniform stopper fit. Will withstand repeated
sterilization (wet or dry). Designed by Dr. Olga R. Povitsky.
Cat. No.
CLS12952L
Capacity
(mL)
Rubber
Stopper No.
Approx. Cross
Section (mm)
Approx.
Height (mm)
Qty/Cs
2000
89 x 114
327
REUSABLE GLASS
1340 PYREX Brand, Dropping, Bulb and Pipet, Glass Stopper

Recommended for use where preventing contamination by solubility or pH change is important.
Stopper is not covered by specifications, but ground to an interchangeable 1:10 taper. Pipet
capacities are .25, .5, and 1.0 mL respectively.
Description
Capacity
(mL)
Approx. Diam. x
Height w Stopper (mm)
Qty/Cs
Complete
Complete
Pipet w/Bulb Only
30
125
.25
35 x 110
55 x 150
12
12
1
Cat. No.
CLS134030
CLS1340125
CLS134030PO
Reference: ASTM D-281.
1367 CORNING Brand, Milk Dilution, Screw Cap

Narrow mouth bottle for general storage of solutions and tissue culture work. Phenolic cap with
rubber liner will withstand sterilization (wet at 121C). Meets the requirements for milk dilution
bottles stated in the Standard Methods for the Examination of Dairy Products, published by the
American Public Health Association.
Cat. No.
CLS1367160
Capacity
(mL)
Approx. Cross
Section (mm)
Approx.
Height (mm)
Qty/Pk
Qty/Cs
160
44 x 44
150
12
48
For cap only, see Cat. No. CLS999928 size G.P.I. No. 28-400.
1368 CORNING Brand, Milk Dilution, Wide Mouth, Screw Cap

Wide mouth bottle (approximately 28 mm opening) to facilitate addition of dry solids or liquids.
Phenolic cap with rubber liner will withstand sterilization (wet at 121C). Meets the requirements
for milk dilution bottles stated in the Standard Methods for the Examination of Dairy Products,
published by the American Public Health Association.
Cat. No.
CLS1368160
Capacity
(mL)
Approx. Cross
Section (mm)
Approx.
Height (mm)
Qty/Pk
Qty/Cs
160
44 x 44
150
12
48
For cap only, see Cat. No. CLS999940, size G.P.I. No. 40-400.
1372 CORNING Brand, Milk Dilution, Screw Cap, Graduated

Narrow mouth bottle with a cut-line graduation mark at 99 1 mL. Phenolic cap with rubber liner
will withstand sterilization (wet at 121C). Meets the requirements for milk dilution bottles stated
in the Standard Methods for the Examination of Dairy Products, published by the American Public
Health Association.
Cat. No.
CLS1372160
Capacity
(mL)
Approx. Cross
Section (mm)
Approx.
Height (mm)
Qty/Pk
Qty/Cs
160
44 x 44
150
12
48
For cap only, See No. CLS999928, G.P.I. No. 28-400.
1373 CORNING Brand, Milk Dilution, Wide Mouth, Screw Cap, Graduated
Wide mouth bottle for easy measuring or filling. With cut-line graduation mark at 99 1 mL.
Phenolic cap with rubber liner will withstand sterilization (wet at 121C).
Cat. No.
CLS1373160
Capacity
(mL)
Approx. Cross
Section (mm)
Approx.
Height (mm)
Qty/Pk
Qty/Cs
160
44 x 44
150
12
48
For cap only, see Cat. No. CLS999940, G.P.I. No. 40-400.
REUSABLE GLASS
1395 PYREX Brand, Media, Storage, Screw Cap

Heavy duty bottle which can be used for storage as well as mixing and sampling. Includes linerless,
one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red
PBT caps and red ETFE pouring rings are available for dry heat sterilization (180C). Glass bead
indicates full capacity line on 100 mL through 2 liter size. Bottles have permanent white enamel
graduations and marking spots. Color-coded polypropylene caps in a choice of orange, green,
purple, red, and light gray are available.
Cat. No.
CLS139525
CLS139550
CLS1395100
CLS1395250
CLS1395500
CLS13951L
CLS13952L
CLS13955L
CLS139510L
CLS139532LTC
CLS139532LTR
CLS139545LTC
CLS139545LTR
CLS139545LTR
CLS139545HT
CLS139545HT
CLS139545LTC
CLS139545LTC
CLS139545LTC
CLS139545LTM
CLS139525HT
CLS139532HT
CLS139545HT
CLS139525TS
CLS139532TS
CLS139545TS
Description
Capacity
(mL)
Storage Bottle
25
Storage Bottle
50
Storage Bottle
100
Storage Bottle
250
Storage Bottle
500
Storage Bottle
1000
Storage Bottle
2000
Storage Bottle
5000
Storage Bottle
10000
Orange Cap
Clear Ring
Orange Cap
Clear Ring
Clear Ring
Red Cap
Red Ring
Purple Cap
Light Gray Cap
Green Cap
Gray Membrane Cap

Cap, Open Top,
PBT, High Temp
Cap, Open Top,

PBT, High Temp
Cap, Open Top,

PBT, High Temp
Septa, PTFE
Faced Silicone
Septa, PTFE
Faced Silicone
Septa, PTFE
Faced Silicone
Thread
Finish
Approx.
Diameter x
Height (mm)
Grad.
Range
(mL)
Grad.
Interval
(mL) Qty/Cs
GL25
GL32
GL45
GL45
GL45
GL45
GL45
GL45
GL45
GL32
GL32
GL45
GL45
GL45
GL45
GL45
GL45
GL45
GL45
GL45
36.5 x 70
46 x 88
56 x 100
70 x 138
86 x 176
101 x 225
136 x 262
186 x 335
234 x 410
10-25
20-50
40-80
50-200
100-400
100-900
400-1800
500-4500
2000-9000
5
10
20
50
100
100
200
500
1000
10
10
10
10
10
10
10
1
1
20
50
20
50
50
10
50
20
20
20
10
GL25
10
GL32
10
GL45
10
GL25
10
GL32
10
GL45
10
Caution: Bottles larger than 2L should NOT be used with bottle top filter units, or in other applications involving vacuum pressure,
as breakage may occur. DO NOT have caps tightened mmediately after autoclaving as the vacuum resulting from cooling can cause
breakage. A pouring ring is not included on 25 mL size. A vented cap is NOT recommended for use on the 5L and 10L CLS1395
bottle.
REUSABLE GLASS
51395 PYREX Brand, Low Actinic Bottle, Media, Storage, Graduated, Screw Cap
Heavy duty bottle of low actinic glass for use when storing/transporting light sensitive materials.
Includes a linerless, one-piece, autoclavable, orange polypropylene, plug-seal cap with drip-free
pouring rings. Glass bead indicates full capacity line. Permanent white enamel graduations and
marking spots.Thread size: GL45.Neck I.D.: 29 mm I.D.
Cat. No.
CLS51395100
CLS51395250
CLS51395500
CLS513951L
Capacity
(mL)
Diameter x
Height (mm)
Approx. Grad.
Range (mL)
Grad.
Interval (mL)
Qty/Cs
100
250
500
1000
56 x 100
70 x 138
86 x 176
101 x 225
40-80
50-200
100-400
100-900
20
50
100
100
4
4
4
4
Replacement caps and pouring rings are available under Cat. No. CLS1395 series.
1396 PYREX Brand, Media Storage, Screw Cap, Graduated, Square
NEW
Manufactured from PYREX borosilicate glass for chemical and thermal resistance. Square bottles
are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for
mixing, sampling and storage. Features include white enamel graduations, large marking spot and
a glass ridge molded into the bottle to indicate full capacity. Includes linerless, one-piece, autoclavable, orange, polypropylene plug seal cap with drip-free pouring ring. A wide range of optional
caps are available under the catalog series 1395.
Cat. No.
CLS1396100*
CLS1396250*
CLS1396500*
CLS13961L*
Description
Bottle, Square, Cap, Pour Ring

Approx.
Dimensions Grad. Grad.
Cap. Thread
O.D. x
Range Interval Qty/
(mL) Finish Hgt. (mm) (mL)
(mL) Cs
100
250
500
1000
GL32
GL45
GL45
GL45
50 x 105 40-80
64 x 138 50-200
78 x 176 100-400
94 x 217 100-900
20
50
100
100
10
10
10
10
*Do NOT have caps tightened immediately after autoclaving as the vacuum resulting from cooling can cause breakage. Not
applicable for vacuum use.
61626 PYREXPLUS Brand Bottles, Media, Storage, Screw Cap

Heavy duty bottle which can be used for storage as well as mixing and sampling. A protective PVC
coating* helps prevent glass from shattering and reduces spills. Autoclavable (121C) and resistant
to thermal shock. Bottle comes complete with autoclavable, one-piece, teal colored, polypropylene
plug seal cap with drip-free pouring ring. Glass bead indicates full capacity line. Teal enameled
graduations and marking spot. Thread size: GL45. Neck opening: 29 mm I.D.
Cat No
CLS61626100
CLS61626250
CLS61626500
CLS616261L
CLS616262L
Capacity
(mL)
Approx.
Diameter x
Height (mm)
Grad.
Range (mL)
Grad.
Interval (mL)
Qty/Cs
100
250
500
1000
2000
56 x 100
70 x 138
86 x 176
101 x 225
136 x 262
40-80
50-200
100-400
100-900
400-1800
20
50
100
100
200
4
4
4
4
4
REUSABLE GLASS
1500 PYREX Brand, Reagent, Narrow Mouth, PYREX

With neck ground and furnished with
Cat. No.
CLS1500125
CLS1500250
CLS1500500
CLS15001L
CLS15002L
Stopper
stopper.
Description
Capacity
(mL)
Stopper No.
Complete
Complete
Complete
Complete
Complete
125
250
500
1000
2000
19
19
24
29
29
Approx. Diam. x
Height (mm)
Qty/Pk
55 x 136
70 x 160
86 x 198
107 x 235
133 x 282
Qty/Cs
6
1
1
1
1
48
3
24
24
6
For stopper only, see Cat. No. 7575.
61500 PYREXPLUS Brand, Reagent, Narrow Mouth, Protective Coating*

PYREX Stopper
Features a protective PVC coating for longer product life and safety. Protective coating helps prevent glass from shattering and reduces spills. Autoclavable (121C) and resistant to thermal shock.
Bottle has a ground neck with a stopper.
Cat. No.
CLS61500125
CLS61500250
CLS61500500
CLS615001L
CLS615002L
Description
Capacity
(mL)
Stopper No.
Complete
Complete
Complete
Complete
Complete
125
250
500
1000
2000
19
19
24
29
29
Approx. Diam. x
Height (mm)
Qty/Pk
55 x 136
70 x 160
86 x 198
107 x 235
133 x 282
Qty/Cs
6
1
1
1
12
6
6
6
1
For stopper only, see Cat. No. CLS7575.

Do not place over direct heat or flame. Do not heat above 121C moist heat or 110C dry heat.
Not recommended for dry heat sterilization. Will melt.
1585 PYREX Brand, Serum

Designed especially for handling and storing sterile culture media and sera where stability of the
glass is of prime importance. Also suitable for storing distilled water and standard solutions. Will
withstand hot air (dry) or steam (wet) sterilization. Necks are tooled to increase mechanical
strength and for uniform stopper fit.
Cat. No.
CLS15854L
CLS15859L
Capacity
(mL)
Rubber
Stopper No.
Approx.
Diam. x Height (mm)
Qty/Cs
4000
9000
8
8
165 x 287
203 x 408
8
4
1595 PYREX Brand, Solution

These bottles are designed for storage of solutions and are ideal for media preparation. The 9.5
liter ( 1/2 gallon) and 13.25 liter (1/2 gallon) sizes are in a conventional bottle shape. The 19 liter
(5 gallon) and 45.5 liter (12 gallon) sizes are similar in design to a carboy. The 19 liter size is
weight controlled to 15 lbs. maximum for ease of handling. The necks are tooled to increase
mechanical strength and for uniform stopper fit.
Cat. No.
CLS15952X
CLS15953X
CLS15955
CLS159512
Capacity
(mL)
Rubber
Stopper No.
Approx.
Diam. x Height (mm)
Qty/Cs
9500
13250
19000
45500
12
12
12
12
187 x 470
238 x 445
292 x 508
406 x 584
4
4
1
1
REUSABLE GLASS
1596 PYREX Brand, Solution, Graduated, Carboy

With double scale (liters and gallons) black enamel graduations. Graduated in 500 mL increments.
Cat. No.
CLS15969L
CLS159613L
CLS159619L
Capacity
(mL)
Rubber
Stopper No.
Approx.
Diam. x Height (mm)
Qty/Cs
9500
13250
19000
12
12
12
187 x 476
238 x 438
292 x 508
4
4
1
61596 PYREXPLUS Brand, Solution, Protective Coating,* Graduated, Carboy

Bottle features a protective PVC coating for longer product life and safety. Protective coating
helps prevent glass from shattering and reduces spills. Autoclavable (121C) and resistant to thermal shock. Designed for storage of solutions, ideal for media preparation. The 9L and 13L sizes
are in conventional bottle shape. The 19L size is similar in design to a carboy. Necks are tooled to
increase mechanical strength and for uniform stopper fit. Graduated in 500 mL increments with
black enamel.
Cat. No.
CLS615969L
CLS6159613L
CLS6159619L
Capacity
(mL)
Rubber
Stopper No.
Approx.
Diam. x Height (mm)
Qty/Pk
Qty/Cs
9500
13250
19000
12
12
12
187 x 476
238 x 438
292 x 508
2
1
1
1620 PYREX Brand, Hubbard-Carmick, Specific Gravity

Use with viscous fluids, semi-solid bitumens and emulsions.
Cat. No.
CLS162025
Capacity
(mL)
Stopper
Size
Approx.
Diam. x Height (mm)
Qty/Cs
25
24/12
40 x 57
12
Reference: ASTM Test D-70, D-1429 and D-115.
1682 PYREX Brand, Weighing, Low Form, Short Length Joints

Low form bottle with a ST joint style opening that accepts a closed bottom hollow Pennyhead
style stopper.
1682
Cat. No.
CLS16825030
Approx.
Capacity (mL)
Approx.
Weight (g)
Joint
Approx. O.D.
x Length (mm)
Qty/Pk
Qty/Cs
35
53
50/12
50 x 30
1684 PYREX Brand, Weighing, PARR, Short Length External
Joints
Joints Designed for use in weighing small samples. The closure style cap fits over the externally
ground body.
1684
Cat. No.
CLS16842024
Approx.
Capacity (mL)
Approx.
Weight (g)
Joint
Approx. O.D.
x Length (mm)
Qty/Pk
Qty/Cs
12
24/12
20 x 24
12
REUSABLE GLASS
1688 PYREX Brand, Weighing, Low Form, Short Length External
Joints
Low form bottle like the 1682 bottles but with a closure that fits over the external ground body.
Cat. No.
1688
CLS16885030
Approx.
Capacity (mL)
Approx.
Weight (g)
Joint
Approx. O.D.
x Length (mm)
Qty/Pk
Qty/Cs
36
68
55/12
50 x 30
n/a
1700 CORNING Brand, Coliform Water Test Sample Container, Sterile* with Sodium
Thiosulfate Tablet.
Sterile container used in testing for the presence of coliform, a microbiological contaminant in
drinking water. Manufactured from pure polypropylene in a sterile environment. The one-piece
container has attached lid to reduce chance of contamination. Locking arrow assures sterility has
not been compromised. The EPA fill line of 100 mL 2.5% makes it easy to use. A sodium thiosulfate tablet has been added to each container thus saving lab prep time and expense. Leak tight
when sealed properly. An added benefit is the tie-down to protect from accidental opening and
also serves as a custody seal. Sample label and instructions for use are supplied with each. A low
cost, convenient product which meets EPA requirements.
Cat. No.
CLS1700100
Description
Capacity (mL)
Approx. Diam. x Height (mm)
Qty/Cs
Container w/tablet
100-120
65 x 120
100
*Sterile-by-process.
1705 CORNING Brand, Water Test Sample Container, Sterile,* without Sodium
Thiosulfate Tablet
Sterile container used in the testing of non-chlorinated drinking water. Manufactured from pure,
recyclable polypropylene. The one-piece container has attached lid to reduce chance of contamination. Locking arrow assures sterility has not been compromised. Leak tight when sealed properly.
An added benefit is the tie-down which protects against accidental opening.
Cat. No.
CLS1705100
Description
Capacity (mL)
Qty/Cs
Container w/o Tablet
100-120
65 x 120
100
*Sterile-by-process.
1730 CORNING Brand, Snap-Seal Plastic Sample Containers

Designed for a wide variety of applications, these containers provide a reliable leak-tight seal
when closed properly. The Snap-Seal locking device keeps the cap closed and secure. The specially
designed hinged cap stays in place in use, reducing the chance of sample contamination. The
containers are made of recyclable polypropylene, in a translucent style for normal usage. The containers are graduated in both milliliters and ounces, and the cap has a rough surface for marking.
Cat. No.
CLS17305X
CLS17302C
CLS17304H
CLS17304L
CLS17308
CLS173010
10
Capacity
Color
Qty/Cs
0.45 oz. (13 mL)

1.5 oz. (45mL)
4 oz. (120 mL)
4 oz. (120 mL)
8 oz. (240 mL)
10 oz. (300 mL)
Natural
Natural
Natural
Natural
Natural
Natural
16 x 94
30 x 84
45 x 91
68 x 52
80 x 75
63 x 112
500
400
200
200
100
100
REUSABLE GLASS
GA S WA S H I N G B OT TL E S
1760 PYREX Brand, Gas Washing, Tall Form,
Stopper
The stopper incorporates a plain tip tube as the distributor. These bottles have large hexagonal
bases for stability. Tubulations are 10 mm O.D.
Cat. No.
CLS1760125
CLS1760250
CLS1760500
Description
Capacity (mL)
Complete
Complete
Complete
125
250
500
Stopper Size Approx. Height (mm)
29/42
29/42
29/42
Qty/Cs
335
340
390
31770 PYREX Brand, Gas Washing, Tall Form, Fritted Cylinder,
1
1
1
Stopper
Stopper is equipped with a 12 mm diameter fritted cylinder instead of a disc as the distributor.
Cat. No.
CLS31770125EC
CLS31770125C
CLS31770250C
CLS31770500EC
CLS31770500C
Description
Capacity (mL)
and Porosity
Stopper
Size
Approx. O.D.
x Height
(mm)
Qty/Cs
Complete
Complete
Complete
Complete
Complete
125 EC
125 C
250 C
500 EC
500 C
29/42
29/42
29/42
29/42
29/42
38 x 298
38 x 298
51 x 290
63 x 340
63 x 340
1
1
1
1
1
BURETS
2094 PYREX Brand, Colored Scale, Dispensing, Straight Bore Teflon Stopcock Plug
Used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance,
accurate bore tubing with uniform walls, these burets have a permanently colored scale. Tips are
carefully drawn and ground to reduce chipping. Provided with a Teflon stopcock plug to reduce
freezing and eliminate lubricant contamination. The smooth micro-finish of the stopcock barrel
assures a precision fit and optimum leak-resistant performance.
Cat. No.
CLS2094250
CLS2094500
CLS20941L
Capacity
Grad.
(mL)
Interval (mL)
250
500
1000
1
5
10
Tol.
(mL)
Approx. O.D. x
Height (mm)
Stopcock
Bore (mm)
Qty/Cs
2.0
2.5
5.0
4
4
6
33 x 550
41 x 675
50 x 810
1
1
1
2103 PYREX Brand, Colored Scale, Class A,
Teflon Stopcock Plug
The capacity tolerance on these burets is established by ASTM E-287 and they are calibrated in
accordance with ASTM E-542. Tips are carefully drawn from accurate bore tubing to insure proper
drainage rates. This buret has colored markings, fine, sharp lines and large easy-to-read numbers.
The stopcock barrel has a smooth micro-finish to assure leak-resistant performance. Each buret is
supplied with a dust cover. All sizes are furnished with a 2 mm bore stopcock plug.
Cat. No.
CLS210310
CLS210325
CLS210350
CLS2103100
11
Capacity
(mL)
Grad.
Interval (mL)
Tol.
(mL)
Approx. O.D. x
Height (mm)
Qty/Cs
10
25
50
100
.05
.10
.10
.20
.02
.03
.05
.10
9 x 560
12 x 560
14 x 750
18 x 752
1
1
1
1
REUSABLE GLASS
2105 PYREX Brand, Serialized/Certified Class A, Colored Scale Teflon Stopcock Plug
Calibrated to Class A tolerances in accordance with ASTM D-511, E-542, and ASTM E-287.
Each buret is individually serialized and supplied with a Certificate of Identification and Capacity,
traceable to NIST standards. This buret has colored markings with fine, sharp lines and large
easy-to-read numbers. Each buret is supplied with a dust cover. All sizes are furnished with a 2 mm
bores stopcock plug.
Cat. No.
CLS210510
CLS210525
CLS210550
CLS2105100
Capacity
(mL)
Grad.
Interval (mL)
Tolerance
( mL)
Approx. O.D.
x Height (mm)
Qty/Cs
10
25
50
100
.05
.10
.10
.20
.02
.03
.05
.10
9 x 560
12 x 560
14 x 750
18 x 752
1
1
1
1
2110 PYREX Brand, Rotaflo, Dual Plug, White Enamel Markings, with Rotaflo Stopcock
Buret with automatic zero, Rotaflo dual stopcock. The dual stopcock helps eliminate titration errors.
Cat. No.
Capacity
(mL)
Grad.
Interval (mL)
Tol.
( mL)
Approx. O.D. x
Height (mm)
GP Plug
Qty/Cs
25
50
.10
.10
.06
.10
12 x 560
14 x 760
3
3
1
1
CLS211025
CLS211050
2116 PYREX Brand, Economy Grade, Teflon Locking Stopcock

An economical buret designed to reduce replacement costs by providing replaceable components.
These sturdy, durable burets have tooled tops and bottoms and white enamel graduations. The
screw thread locking Teflon stopcock with ground tip is compatible with Cat. No. CLS2116 existing buret bodies. Simply replace the stopcock assembly to benefit from the improved design.The
new replaceable stopcock assembly features a screw thread locking nut and collar which ensures that
the stopcock cannot fall out in use. The CLS2116GTO replaceable tip has a ground end which
provides a better grip and helps prevent the tip from falling out.
Capacity
Grad.
(mL)
Interval (mL)
Cat. No.
Description
CLS211625
CLS211650
CLS2116GTO
Complete
25
Complete
50
Tip Only with
Ground End
(for use with
CLS2116LSO only
Locking Stopcock
Only
CLS2116LSO
Tol. Approx. O.D. x

( mL) Height (mm)
Qty/
Pk
Qty/
Cs
.10
.10
.06
.10
14 x 450
14 x 740
2
2
6
6
12
2122A PYREX Brand, Colored Scale, Straight Bore Teflon Stopcock

Burets are suitable for use in school and institutional laboratories not requiring the accuracy of our
Class A models. Supplied with a Teflon stopcock plug. The microfinish of the barrel provides a
precision fit. The tips are carefully drawn for accuracy to insure proper drainage rate. Each buret
is supplied with a dust cover. All sizes furnished with a 2 mm bore stopcock plug. This buret has
durable colored markings.
Cat. No.
CLS2122A10
CLS2122A25
CLS2122A50
CLS2122A100
12
Description
Complete
Complete
Complete
Complete
Capacity
Grad.
Tol.
Approx. O.D. x
(mL)
Interval (mL) ( mL) Height (mm)
10
25
50
100
.05
.10
.10
.20
.04
.06
.10
.20
9 x 560
12 x 560
14 x 750
18 x 752
Stopcock
Qty/Cs
2
2
2
2
1
1
1
1
REUSABLE GLASS
2128 PYREX Brand, Micro, Precision Bore, Funnel Top, Class A, Straight
white enamel markings.
Stopcock,
These burets are designed for precise analytical methods in microchemistry. Precision bore tubing
throughout the body assures accuracy between any two points. Funnel top facilitates addition of
reagents by pouring, or by suction from below, through a rubber-stoppered tube. Tips are tapered
to assure smooth flow. Stopcocks turn freely, yet give positive control and are of 2 mm bore.The
capacity tolerance on these burets is established by ASTM E-1189 and are calibrated in accordance with ASTM E-542.
Cat. No.
Capacity
(mL)
Grad.
Interval (mL)
Tol.
( mL)
Stopcock
Bore (mm)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
.01
.01
7 x 735
CLS21285
COLUMN
2155 PYREX Brand, Distilling, Drip Tip,
Joints
This distilling column is simple in design and easy to use. It is useful for a wide range of applications in the lab, particularly in fractionation.
Cat. No.
CLS215519
Approx.
Length (mm)
Joint
Size
283
Approx. Jacket
O.D. x Length (mm)
Tublation
O.D. (mm)
Qty/Cs
28 x 190
10
19/22
*This column is also a replacement for organic chemistry kits Cat. Nos. CLS6949 through CLS6949K.
CONDENSERS
52300 PYREX Brand, Tube, Low Actinic, Drip Tip,
Joint
A simple air condenser, useful for condensation of materials with boiling points above 150C, with
an inner 24/40 drip tip. Low actinic glass protects light sensitive materials.
Cat. No.
Approx. O.D. x Length (mm)
CLS52300650
Inner Inner Joint Size
13 x 650
Qty/Cs
24/40
2400 PYREX Brand, Liebig, Drip Tip, Inner and Outer
Joints
A general purpose condenser that can be used for distillation and extraction. Suitable for use in
vacuum distillations. With the outer joint at the top and the inner joint at the bottom with a drip
tip. The tubulation O.D. is approximately 10 mm.
Cat. No.
Joint
Size
Inner
Joint
Size
Outer
Approx.
Jacket O.D. x
Length (mm)
Approx.
Height
(mm)
Qty/Pk
Qty/Cs
CLS2400200
CLS2400300
19/38
24/40
19/38
24/40
41 x 200
41 x 300
350
450
1
4
2480 PYREX Brand, Allihn, Drip Tip, Inner and Outer
Joints
A widely used condenser with greater surface area than the corresponding Liebig type. With the
outer joint at the top and the inner joint at the bottom with a drip tip. Suitable for use in vacuum
distillations. The tubulations have an O.D. of approximately 10 mm.
Cat. No.
CLS2480500
13
No. of
Bulbs
Joint
Size
Inner
Joint
Size
Outer
Approx.
Jacket O.D. x
Length (mm)
Approx.
Height
(mm)
Qty/Pk
Pk/Cs
24/40
24/40
41 x 500
650
REUSABLE GLASS
2700 PYREX Brand, West

This condenser is designed with a heavy-wall outer jacket to provide a sturdy, long-lasting unit,
while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same
side to reduce breakage and the adapter ends are all tooled for No. 3 rubber stopper fit. The tubulation O.D. is approximately 10 mm.
Cat. No.
Approx. Jacket O.D. x Length (mm)
Approx. Height (mm)
Qty/Cs
19 x 200
345
CLS2700200
2800 PYREX Brand, West, Drip Tip, Inner and Outer
Joint
This condenser is designed with a heavy-wall outer jacket to provide a sturdy, long-lasting unit,
while the inner tube has a thinner wall for efficient heat transfer. Tubulations are on the same side
to reduce breakage. With the outer joint at the top and the inner joint at the bottom with a
drip tip. The tubulation O.D. is approximately 10 mm.
Cat. No.
Inner
Joint Size
Outer
Joint Size
Jacket O.D. x
Approx. Length (mm)
Approx.
Height (mm)
24/40
24/40
18 x 300
450
CLS2800300
Qty/Pk Qty/Cs
CRUCI BLE AN D COVER

12940 VYCOR Brand, Crucible and Cover
The transparent body and lid are useful in analytical work, particularly where ashing of the sample
is required. Lids will be found useful for covering platinum or opaque crucibles. Note: Using
covers of dissimilar material can cause spalling.
Cat. No.
Description
Capacity
(mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
CLS1294030CO
CLS1294030BO
CLS1294050CO
CLS1294050BO
Cover Only
Bottom Only
Cover Only
Bottom Only
30
30
50
50
54 x 21
45 x 40
60 x 21
50 x 50
6
6
6
6
CYLINDERS
2962 PYREX Brand, Hydrometer Jar
Breakage is minimized by the heavy wall construction. The large hexagonal base, sealed to the
cylinder body, increases stability. Meets ASTM specifications D-287 and E-100.
Cat. No.
CLS2962100
CLS2962250
CLS2962300
CLS2962500
CLS29621L
14
Capacity (mL)
Qty/Pk
Qty/Cs
100
250
300
500
1000
29 x 254
39 x 340
39 x 381
50 x 390
64 x 465
1
1
1
1
1
18
18
12
12
1
REUSABLE GLASS
2982 PYREX Brand, Single Metric Scale, PYREX
Stopper, Graduated
Calibrated to contain. Useful as a mixing cylinder. Each features the PYREX stopper. Graduations
are in durable white enamel. See Cat. No. CLS3002 for the equivalent cylinder supplied with a
Corning test certificate.
Cat. No.
CLS298210
CLS298225
CLS298250
CLS2982100
CLS2982250
CLS2982500
CLS29821L
CLS29822L
Grad.
Capacity Interval
Description
(mL)
(mL)
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
10
25
50
100
250
500
1000
2000
0.1
0.2
1.0
1.0
2.0
5.0
10.0
20.0
ASTM
Tol.
( mL)
Approx.
O.D. x
Height (mm)
0.2
0.3
0.5
1.0
2.0
4.0
6.0
12.0
13 x 195
18 x 225
24 x 255
29 x 295
39 x 385
50 x 445
64 x 520
83 x 590
Stopper
No.
Qty/
Pk
Qty/
Cs
2
1
1
1
1
1
24
18
12
8
8
6
1
1
9
13
16
16
22
27
32
38
2984 PYREX Brand, Blue Single Metric Scale, Graduated

Calibrated "To Contain." Useful as a mixing cylinder. Graduations are in durable blue enamel.
Each features a PYREX stopper. Approx. height does not include stopper.
Cat. No.
CLS2984100
Capacity
(mL)
Grad.
Interval (mL)
Tol.
(mL)
Approx. O.D.
x Height (mm)
Stopper
No.
Qty/Pk
Qty/Cs
100
1.0
1.0
29 x 270
16
For stoppers only, see Cat. No. CLS7650.
3002 PYREX Brand, Serialized/Certified, Class A, Single Metric Scale, Graduated,

PYREX Stopper
Useful as a mixing cylinder. Calibrated to contain in accordance with ASTM E-1272 and
ASTM E-542. Each cylinder is individually serialized and supplied with a Corning Certificate
of Identification and Capacity, traceable to NIST standards. Each features the PYREX stopper.
Graduation markings are in durable white enamel.
Cat. No.
CLS300210
CLS300225
CLS300250
CLS3002100
CLS3002250
CLS3002500
CLS30021L
CLS30022L
Capacity
(mL)
Grad.
Interval (mL)
ASTM
Tol. ( mL)
Approx. O.D. x
Height (mm)
10
25
50
100
250
500
1000
2000
0.1
0.2
1.0
1.0
2.0
5.0
10.0
20.0
.10
.17
.25
.50
1.0
2.0
3.0
6.0
13 x 195
18 x 225
24 x 255
29 x 295
39 x 385
50 x 445
64 x 520
83 x 550
Stopper
No.
Qty/Cs
9
13
16
16
22
27
32
38
1
1
1
1
1
1
1
1
3012 PYREX Brand, Single Metric Scale, Outer
Joint, Graduated
Calibrated to contain. Equipped with a 24/40 outer joint, these cylinders are particularly useful as distilling receivers. Graduation markings are in durable white enamel. Supplied without
stoppers.
Cat. No.
CLS3012100
15
Capacity
(mL)
Grad.
Interval (mL)
ASTM Tol.
( mL)
Approx. O.D. x
Height (mm)
Qty/Cs
100
1.0
1.0
29 x 295
REUSABLE GLASS
3022 PYREX Brand, Single Metric Scale, Graduated

Calibrated to contain, with white enamel graduations. The 100 mL capacity is in accordance
with ASTM E-133 and E-1272 and is used in ASTM tests D-86, D-216 and D-447. The 10 mL
size has a funnel top. Bumper guards are supplied with 25mL thru 2000 mL sizes inclusive.
Cat. No.
CLS302210
CLS302225
CLS302250
CLS3022100
CLS3022250
CLS3022500
CLS30221L
CLS30222L
Capacity
(mL)
Grad.
Interval (mL)
ASTM
Tol. ( mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
10
25
50
100
250
500
1000
2000
0.1
0.2
1.0
1.0
2.0
5.0
10.0
20.0
0.2
0.3
0.5
1.0
2.0
4.0
6.0
12.0
13 x 178
18 x 192
24 x 225
29 x 254
39 x 340
50 x 392
64 x 465
83 x 520
2
1
1
1
1
1
1
1
24
18
18
12
12
8
1
1
3023 PYREX Brand, Cylinder, Double Metric Scale, Class A, Graduated

Cylinders are calibrated to deliver in accordance with ASTM E-1272 and ASTM E-542. The
double scale, numbered up and down, is in durable white enamel. Supplied with shock absorbing
polyethylene bumper guards.
Cat. No.
CLS302350
CLS3023100
CLS3023500
CLS30231L
CLS30232L
Capacity
(mL)
Grad.
Interval (mL)
ASTM
Tol. ( mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
50
100
500
1000
2000
1.0
1.0
5.0
10.0
20.0
.25
.50
2.0
3.0
6 .0
24 x 225
29 x 254
50 x 390
64 x 465
83 x 520
1
1
1
18
12
8
1
1
3024 PYREX Brand, Single Metric Scale, Graduated

Calibrated to deliver, with white enamel graduations. Bumper guards are supplied on 25 mL
through 4000 mL sizes.
Cat. No.
CLS30245*
CLS302410*
CLS302425
CLS302450
CLS3024100
CLS3024250
CLS3024500
CLS30241L
CLS30242L
CLS30244L
CLS3024PACK
Capacity
(mL)
Grad.
Interval (mL)
ASTM
Tol. (mL)
5
10
25
50
100
250
500
1000
2000
4000
0.1
0.1
0.2
1.0
1.0
2.0
5.0
10.0
20.0
50.0
0.1
0.2
0.3
0.5
1.0
2.0
4.0
6.0
12.0
29.0
Approx. O.D. x
Height (mm) Qty/Pk
12 x 117
13 x 177
18 x 192
24 x 225
29 x 254
39 x 340
50 x 390
64 x 465
83 x 520
110 x 585
*Funnel top.
16
Qty/Cs
2
12
2
24
1
18
1
18
1
12
1
12
1
8
1
1
1
1
1
Assortment Pack
REUSABLE GLASS
63024 PYREXPLUS Brand, Single Metric Scale, Protective Coating, Graduated,

Calibrated to Deliver
Cylinder features a protective polymer coating for longer product life and safety. Autoclavable
(121C) and resistant to thermal shock. The cylinder is calibrated to deliver. Bumper guards not
supplied.Covered by U.S. Patent #4940613.
Cat. No.
CLS63024100
CLS63024250
CLS63024500
CLS630241L
CLS630242L
Capacity
(mL)
Grad.
Interval (mL)
ASTM Tol.
( mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
100
250
500
1000
2000
1.0
2.0
5.0
10.0
20.0
1.0
2.0
4.0
6.0
12.0
29 x 254
39 x 340
50 x 390
64 x 460
83 x 520
1
1
1
1
1
4
4
4
4
2
3025 PYREX Brand, Double Metric Scale, Economy, Graduated

Calibrated to contain. A less costly cylinder, designed for those institutions performing many
general laboratory procedures. No bumper guards supplied.
Cat. No.
CLS302510
CLS302525
CLS302550
CLS3025100
CLS3025250
CLS3025500
CLS30251L
CLS30252L
Capacity
(mL)
Gradutation
Interval (mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
10
25
50
100
250
500
1000
2000
0.1
0.2
1.0
1.0
2.0
5.0
10.0
20.0
17 x 140
20 x 144
28 x 166
29 x 254
39 x 340
50 x 390
64 x 465
83 x 520
2
1
1
1
1
1
1
1
24
18
18
12
12
8
1
1
3026 PYREX Brand, Cylinder, Double Metric Scale, Class A, Graduated

Cylinders are calibrated to deliver in accordance with ASTM E-1272 and ASTM E-542. The
double scale, numbered up and down, is in a durable blue enamel. Supplied with shock absorbing
polyethylene bumper guards.
Cat. No.
CLS302650
CLS3026100
CLS3026250
CLS3026500
CLS30261L
CLS30262L
Capacity
(mL)
Grad.
Interval (mL)
ASTM
Tol. ( mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
50
100
250
500
1000
2000
1.0
1.0
2.0
5.0
10.0
20.0
.25
.50
1.0
2.0
3.0
6.0
24 x 225
28 x 254
39 x 340
50 x 390
64 x 465
83 x 520
1
1
1
1
18
12
12
8
1
1
3042 PYREX Brand, Lifetime Red, Single Metric Scale, Graduated

Calibrated to contain. The scale and figures are durable white enamel, which stand out clearly
against the red color-band on these Lifetime Red cylinders. The 10 mL size has a funnel top.
Bumper guards are supplied with 100 mL through 2000 mL inclusive. The 100 mL size is made
in accordance with ASTM E-133 and E-1272 and is used in ASTM tests D-86 and D-216.
Cat. No.
CLS304210
CLS3042100
CLS3042500
CLS30421L
CLS30422L
Capacity
(mL)
Grad.
Interval (mL)
ASTM
Tol. ( mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
10
100
500
1000
2000
0.1
1.0
5.0
10.0
20.0
0.2
1.0
4.0
6.0
12.0
13 x 178
29 x 254
50 x 390
64 x 465
83 x 520
1
1
1
1
1
24
12
8
1
1
For the same cylinder, but with a built-in glass bumper guard, see Cat. No. CLS3046.
17
REUSABLE GLASS
3044 PYREX Brand, Lifetime Red, Single Metric Scale, Double Pourout, Graduated
Calibrated to contain. The scale and figures are durable white enamel which stand out clearly
against the red color-band on these Lifetime Red cylinders. The cylinder is a Tuttle type of low
form for stability and features a double pourout for convenience.
Cat. No.
CLS304450
CLS3044100
Capacity
(mL)
Grad.
Interval (mL)
Tol.
( mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
50
100
1.0
2.0
0.5
1.0
29 x 148
39 x 157
1
1
12
12
3046 PYREX Brand, Lifetime Red, Single Metric Scale, Graduated

Calibrated to contain. A reinforced bead of glass near the top helps to reduce breakage, if the
cylinder upsets. The 100 mL cylinder is in accordance with ASTM E-133 and E-1272 and is used
in ASTM D-86, D-216, and D-447.
Cat. No.
CLS304610
CLS304625
CLS304650
CLS3046100
CLS3046250
Capacity
(mL)
Grad.
Interval (mL)
ASTM
Tol. ( mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
10
25
50
100
250
0.1
0.2
1.0
1.0
2.0
0.2
0.3
0.5
1.0
2.0
13 x 179
18 x 205
24 x 238
29 x 267
39 x 353
1
1
1
1
1
24
18
18
12
12
3062 PYREX Brand, Serialized/Certified, Class A, Single Metric Scale, Graduated

Calibrated to deliver in accordance with ASTM E-1272 and ASTM E-542. Each cylinder is
individually serialized and supplied with a Certificate of Identification and Capacity, traceable to
NIST standards. Permanent white graduations are easy to read. Bumper guards are supplied with
25 mL through 2000 mL inclusive. The 10 mL size has a funnel top.
Cat. No.
CLS306210
CLS306225
CLS306250
CLS3062100
CLS3062250
CLS3062500
CLS30621L
CLS30622L
Capacity
(mL)
Grad.
Interval (mL)
ASTM
Tol. ( mL)
Approx. O.D. x
Height (mm)
Pk/Cs
Qty/Cs
10
25
50
100
250
500
1000
2000
0.1
0.2
1.0
1.0
2.0
5.0
10.0
20.0
0.10
0.17
0.25
0.50
1.0
2.0
3.0
6.0
13 x 178
18 x 192
24 x 225
29 x 254
39 x 340
50 x 390
64 x 465
83 x 520
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3066 PYREX Brand, Bumper Guard

A polyethylene shock absorbing ring designed to reduce breakage of cylinders. For best results,
slide the ring toward the top to absorb shock should the cylinder be accidentally upset.
Cat. No.
CLS3066100
CLS3066250
18
Fits Cylinder Capacity (mL)
Qty/Cs
100
200, 250
1
1
REUSABLE GLASS
3075 PYREX Brand, Student, Plastic Hexagonal Base, Graduated

Calibrated to contain. These cylinders were initially designed for school laboratories. However,
low cost and design advantages have made them attractive to other users. They are supplied in two
parts a strong, accurate glass graduate and a detachable, sturdy plastic base which absorbs impacts
and reduces breakage. Tolerances 5% of total at any point.By removing the base, the graduate
can be conveniently stacked. Replacement graduates can be purchased separately. Bumper guards
are supplied with 25 mL through 100 mL inclusive. Graduation marks are in durable white enamel.
The 10 mL has a funnel top for careful pouring.
Cat. No.
CLS307510
CLS307525
CLS307550
CLS3075100
CLS307510CO
CLS307525CO
CLS307550CO
Description
Capacity
(mL)
Grad.
Interval (mL)
Approx. O.D. x
Height (mm)
Qty/Cs
Complete
Complete
Complete
Complete
Cylinder
Cylinder
Cylinder
10
25
50
100
10
25
50
0.1
0.2
1.0
1.0
0.1
0.2
1.0
13 x 160
19 x 188
23 x 218
30 x 248
12
12
12
12
1
1
1
CLONING CYLINDER
3166 PYREX Brand, Cloning Cylinder
Clone a single cell or group of cells by surrounding them with this glass cylinder. Dip the end of
the cylinder into a sterile silicone grease before pressing to the bottom of a culture flask to create
an isolated well.
Cat. No.
CLS31666
CLS31668
CLS316610
Description
Dimensions O.D. x Height (mm)
Qty/Cs
Cloning Cylinder
Cloning Cylinder
Cloning Cylinder
6x8
8x8
10 x 10
125
125
125
D E S I C C ATO R S
3078 PYREX Brand, Small Size, Knob Top
Designed for general analytical work. The large sturdy knob makes the cover easy to handle.
Approximate bowl volume is 2200 mL. Not for vacuum applications.
Cat. No.
Description
CLS3078160
CLS3078160CO
Complete
Cover Only
Approx. I.D.
Approx.
of Ground Total Height
Flange (mm)
(mm)
160
160
255
95
Approx.
Recom.
Chamber
Plate Diam.
Depth (mm)
(mm)
Qty/Cs
100
140
1
1
Warning: Do not heat or subject to pressure.
3080 PYREX Brand, Large Size, Knob Top

Approximate bowl volume is 3800 mL on the 200 mm size and 7500 mL on the 250 mm size. Not
for vacuum applications.
Cat. No.
Description
Approx. I.D.
of Ground
Flange (mm)
CLS3080200
CLS3080250
CLS3080200CO
CLS3080250CO
CLS3080200LO
CLS3080250LO
Complete
Complete
Cover Only
Cover Only
Lower Only
Lower Only
200
250
200
250
200
250
Approx.
Approx.
Recom.
Total Height
Chamber
Plate Diam.
(mm)
Depth (mm)
(mm)
Qty/Cs
315
325
112
117
202
210
125
130
125
130
19
190
230
190
230
1
1
1
1
1
1
REUSABLE GLASS
3118 PYREX Brand, Small Size, Sleeve

The rugged 40/35 external sleeve with tooled hose connection serves as the stopcock and is
designed so that its manipulation is not affected by the vacuum. The open position is indicated by
the molded arrow on the cap. A quarter turn from this position closes the desiccator. For ease in
use and improved performance, it is recommended that the sleeve be lubricated with a siliconebased vacuum grease.The tubulation O.D. is approximately 10 mm. Approximate bowl volume
capacity is 2200 mL. Rated 1-atmosphere vacuum.
Cat. No.
Description
CLS3118160
CLS3118160CO
CLS3118SO
CLS3118RO
Complete
Cover Only
Sleeve Only
Ring Only
Approx. I.D.
Approx.
Approx.
of Ground Total Height Chamber
Flange (mm)
(mm)
Depth (mm)
160
160
255
95
35
Recom.
Plate Diam.
(mm)
Qty/Cs
140
1
1
1
1
100
For lower part only, see Cat. No. CLS3078.

3120 PYREX Brand, Large Size,
Sleeve
The rugged 55/38 external sleeve with tooled hose connection serves as the stopcock and is
designed so that its manipulation is not affected by the vacuum. The open position is indicated by
the molded arrow on the cap. A quarter turn from this position closes the desiccator. For ease in
use and improved performance, it is recommended that the sleeve be lubricated with a siliconebased vacuum grease. The tubulation O.D. is approximately 10 mm. Bowl capacities 3800 mL
and 7500 mL respectively. Rated 1-atmosphere vacuum.
Cat. No.
Description
CLS3120200
CLS3120250
CLS3120200CO
CLS3120250CO
CLS3120SO
CLS3120RO
Complete
Complete
Cover Only
Cover Only
Sleeve Only
Ring Only
Approx. I.D.
Approx.
Approx.
Recom.
of Ground Total Height
Chamber
Plate Diam.
Flange (mm)
(mm)
Depth (mm)
(mm)
200
250
200
250
315
325
112
117
35
125
130
Qty/Cs
190
230
1
1
1
1
1
1
For lower part only, see Cat. No. CLS3080.

DISHES
3140 PYREX Brand, Crystallizing
The rims on these dishes are reinforced and fire polished to reduce chipping. Will withstand
repeated sterilization (wet or dry). Ideal for storage and crystallization.
Cat. No.
CLS314070
CLS314080
CLS314090
CLS3140100
CLS3140125
CLS3140150
CLS3140170
CLS3140190
20
Capacity
(mL)
Fl. Oz.
Approx.
Diam. x Height (mm)
Qty/Pk
Qty/Cs
180
180
270
325
740
1200
1770
2500
6
6
9
11
25
30
60
85
70 x 50
80 x 40
90 x 50
100 x 50
125 x 65
150 x 75
170 x 90
190 x 100
6
6
6
6
4
4
2
2
24
24
18
18
12
8
8
6
REUSABLE GLASS
3160 PYREX Brand, Culture, Petri

These flat, clear dishes will withstand repeated sterilization (wet or dry). The edges are beaded to
provide greater mechanical strength. The bead also provides a means to equally space the side
walls of the bottom and cover, thereby reducing the capillary action of condensed moisture on the
sides. They are not affected chemically or thermally by any of the methods commonly employed
in laboratories where sterilization is a major factor in routine or in specialized work. The covered
dish is not airtight. The tops are marked in blue enamel and the bottoms in white enamel to make
sorting easier. Bottoms also have a triangular, enamel reference point for serial dilutions.
Cat. No.
Description
Size (mm)
Approx.
Diam. x Height (mm)
Qty/Pk
Qty/Cs
CLS316060
CLS3160100
CLS3160101
CLS3160102
CLS3160150
CLS3160152
CLS316060CO
CLS3160100CO
CLS3160101CO
CLS3160102CO
CLS316060BO
CLS3160100BO
CLS3160101BO
CLS3160102BO
CLS3160150BO
CLS3160152BO
Complete
Complete
Complete
Complete
Complete
Complete
Cover Only
Cover Only
Cover Only
Cover Only
Bottom Only
Bottom Only
Bottom Only
Bottom Only
Bottom Only
Bottom Only
60 x 15
100 x 10
100 x 15
100 x 20
150 x 15
150 x 20
60 x 15
100 x 10
100 x 15
100 x 20
60 x 15
100 x 10
100 x 15
100 x 20
150 x 15
150 x 20
58 x 15
98 x 10
98 x 15
98 x 20
148 x 15
148 x 20
58 x 15
98 x 10
98 x 15
98 x 20
58 x 15
98 x 10
98 x 15
98 x 20
148 x 15
148 x 20
12
12
12
12
12
12
72
72
72
72
24
24
12
12
12
12
12
12
12
12
12
12
3170 PYREX Brand, Drying, Heavy Wall

This tray will withstand hot air or steam sterilization. Useful for gel work or paper chromatography.
Do not place over direct heat, for oven use only.
Cat. No.
CLS317012
Approx. Top
Width (mm)
Approx. Top
Length (mm)
Approx. Inside
Depth (mm)
Qty/Cs
305
457
72
3175 PYREX Brand, Drying

A range of trays designed for use as drying, staining or developing trays. They can be used with
paper or gel electrophoresis or paper chromatography. Trays will withstand autoclaving. Do not
place over direct heat, for oven use only.
Cat. No.
CLS31757
CLS31758
CLS31759
CLS317510
Approx. Size LxWxH (mm)
Approx. Capacity (mL)
Qty/Cs
272 x 180 x 50
201 x 201 x 55
330 x 217 x 70
349 x 249 x 60
1750
2000
3000
3500
4
4
4
4
3180 PYREX Brand, Evaporating, Flat Bottom

These dishes have rugged beaded rims and are of standard medium depth.
Cat. No.
CLS318080
CLS318090
CLS3180105
21
80 x 45
90 x 50
105 x 55
Approx. Volume (mL)
Qty/Pk
Qty/Cs
140
170
290
6
6
6
REUSABLE GLASS
13180 VYCOR Brand, Evaporating, Flat Bottom

Useful for ashing material, particularly in electric furnaces. Ashing of alkaline materials and some
metallic oxides can cause etching of VYCOR brand products. The degree of etching will depend
on alkalinity and ashing temperature. Made of Code No. 7913 glass (96% silica), which has high
thermal and chemical resistance and is stable with acids, water and steam.
Cat. No.
Capacity (mL)
Qty/Cs
70 x 28
100
12
90 x 42
CLS131804545
CLS13180100
D I S T I L L I N G A P PA R AT U S
3340 PYREX Brand, Kjeldahl, Nitrogen,
Joints
Used for determining nitrogen in organic compounds. This assembly includes a Kjeldahl flask
specifically developed for this process. Both the digestion and distillation stages can be performed
in this flask. The assembly shown is the distillation stage, where the amount of ammonia, and
hence, nitrogen, is established. The inlet tube allows the permanganate solution to be introduced
after distillation. Supplied with an outer 29/42 joint on the flask and an outer 19/38 joint on
the condenser. Total height is 410 mm; total width is 300 mm; maximum O.D. is 97 mm.
Cat. No.
Description
Capacity (mL)
Qty/Cs
CLS3340500
CLS3340FO
Complete
Flask Only
500
1
1
3440 PYREX Brand, Compact,
Joint
A compact distillation assembly, incorporating a specially designed Friedrichs condenser, with

a vapor tube rising to the top. Supplied with a joint between the Friedrichs condenser and
the flask. The 1000 mL Erlenmeyer flask is supplied with an outer 34/45 joint. Condenser
tubulations are 10 mm O.D.
Cat. No.
Description
Approx.
Height (mm)
Cond. Outlet O.D.

x Length (mm)
Qty/Cs
CLS3440
CLS3440FO
Complete
Flask Only
495
8 x 175
1
1
3602 PYREX Brand, Dean Stark,
Joints
The 10 mL receiver is graduated from 0 to 1 mL in 0.1 mL intervals, with a maximum scale error
of 0.05 mL. The graduation intervals from 1.0 to 10.0 mL are 0.2 mL, with a maximum scale
error of 0.1 mL.
Cat. No.
Capacity
(mL)
Inner and
Outer Joint Size
Approx.
Height (mm)
Qty/Pk
Qty/Cs
10
24/40
216
CLS360210
3611 PYREX Brand, Moisture Test,
Joints
For determining water by distillation. Receivers have a 24/40 ground joint on the sidearm. The
10 mL receiver is graduated, from 0 to 1 mL, in 0.1 mL intervals, with a maximum scale error
of 0.05 mL. Graduation intervals from 1.0 to 10.0 mL are 0.2 mL, with maximum scale error of
0.1 mL. The 25 mL receiver is graduated, from 0 to 1 mL, in 0.1 mL intervals, with a maximum
scale error of 0.05 mL. Graduation intervals from 1.0 to 25.0 mL are 0.2 mL, with a maximum
scale error of 0.1 mL.
Cat. No.
CLS361110
CLS361125
Capacity
(mL)
Inner and
Outer Joint Size
Approx.
Height (mm)
Qty/Cs
10
25
24/40
24/40
237
317
1
1
Reference: ASTM E-123, which covers apparatus used in ASTM method D-95, Test for Water in Petroleum Products and Other
Bituminous Products.
22
REUSABLE GLASS
3622 PYREX Brand, Barrett, Stopcock,
Joints
For determining water content in petroleum or bituminous products, graduated upwards from the
stopcock to 3 mL in 0.2 mL divisions, and from 3 mL to 20 mL in 0.5 mL divisions. Reference:
Barrett method B-2. Also can be used as Dean Stark distillation apparatus specified in British
Standard 756, but utilizes a common U.S. ground joint. It is also an optional setup for ASTM D-95.
Cat. No.
CLS362220
Capacity
(mL)
Inner and
Outer Joint Size
Approx.
Height (mm)
Stopcock
Plug No.
Qty/Pk
Qty/Cs
20
24/40
228
E X T R A C T I O N A P PA R AT U S
3740 PYREX Brand, Soxhlet,
Joints
Bulb in siphon tube near the top of tube facilitates cycling of the siphoning action. The siphon
tube is protected from accidental damage by the vapor tube. joints at the top and bottom.
Cat. No.
Capacity
Inner
to Top of
Joint
Siphon (mL) Size
CLS3740S
CLS3740M
CLS3740XL
50
85
500
24/40
24/40
29/42
Outer
Joint
Size
Approx.
Height
(mm)
Approx.
Siphon to
Plate (mm)
Chamber
I.D. x
Height (mm)
Qty/
Pk
Qty/
Cs
295
303
430
62
80
130
29 x 130
38 x 130
64 x 220
1
1
1
2
2
2
34/45
45/50
71/60
For glass extraction thimble with fritted disc only, See Cat. No. CLS33950.
3840 PYREX Brand,
Joints, Allihn Condenser
This apparatus consists of a Soxhlet extractor, an Allihn condenser and a flask, all equipped with
joints. The tubulation O.D. on the condenser is 10 mm.
Cat. No.
CLS3840S
CLS3840M
CLS3840L
CLS3840XL
CLS3840SCO
CLS3840MCO
CLS3840LCO
Description
Capacity
(mL)
I.D.
Body
Length
(mm)
Complete
Complete
Complete
Complete
Condenser Only
Condenser Only
Condenser Only
125
250
500
1000
27 x 192
37 x 250
46 x 305
64 x 319
Extractor
Joint Size
Inner
(Bottom)
24/40
24/40
24/40
29/42
Extractor
.
Joint Size Approx
Outer
Height
(Top)
(mm) Qty/Cs
34/45
45/50
55/50
71/60
655
711
803
880
1
1
1
1
1
1
1
For extractor only, see Cat. No. CLS3740.

For flask only on sizes 125 thru 500 mL, see Cat. No. CLS4100.
3900 PYREX Brand, Arsine Generator

Designed for arsenic determination by the silver diethyldithiocarbramate photometric method.
Meets A.P.H.A. Standard 104A, ACS/USP and EPA specifications. Fabricated from PYREX
borosilicate glass. Joint on 125 mL flask is 24/40 and ball and socket joint between absorber
and scrubber is 12/2. Complete unit includes clamp.
Cat. No.
CLS3900
CLS3900AO
23
Description
Qty/Pk
Qty/Cs
Arsine Generator, Complete

Absorber Only
1
4
REUSABLE GLASS
3920M PYREX Brand, Continuous Liquid/Liquid Extractor, Complete, Heavier Than

Water, One-Piece
PYREX brand continuous liquid/liquid extractor is designed to meet E.P.A. test method requirements outlined by SW-846, RCRA, and CLP. For use with solvents of heavier specific gravity
than sample liquid being extracted. The sidearm is sealed to the extractor body just below the
45/50 ground joint. The sidearm is sealed higher on the body to reduce the chance of water
spilling over while draining remaining solvent from extractor body at the end of the extraction.
Extraction can be performed outside the hood. Comes complete with PYREX brand Allihn condenser and 500 mL PYREX brand round bottom boiling flask. As dictated by safe laboratory
practices, we recommend that some type of ventilation system be used above or near the units
in case of a drop in condenser water temperature or loss of condenser cold water supply.
Cat. No.
Description
CLS3920M
CLS3840MCO
CLS3920MBO
Complete
Condenser Only
Components
Delivered
Extractor Extractor
Body
Body
Total
Approx.
Approx. Approx.
Capacity Height
Width
Height Qty/
(mL)
(mm)
(mm)
(mm)
Cs
1000
Extractor Body,
45/50 Top,
24/40 Bottom
CLS4320500 Components
355
214
710
1
1
1
12
9610 PYREX Brand, Weathering Test, Graduated

Graduated upward to 0.5 mL in divisions of 0.05 mL, from 0.5 mL to 3 mL in 0.1 mL divisions,
from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a
3 mm vent hole located 180 from the front of the tube.For testing propane, butane and isobutane
mixtures. Reference: California Natural Gasoline Association, Specifications TS441-3, ASTM
D-1837, D-2158.
Cat. No.
Capacity (mL)
Qty/Cs
100
37 x 200
CLS9610100
FIBER GLASS
3950 PYREX Brand, Code No. 3950-9989 Glass
This fiber glass is made from fine glass fibers with diameters controlled to approximately 0.008 mm.
This makes the glass pliable and easy to use. Manufactured from Code No. 9989 glass, this fiber
glass contains minimal heavy metals and is suitable for use as a filtering medium. Supplied in the
form of roving approximately 2 inches in diam. x 22 ft. long. Packaged in 0.23 kg. (0.5 lb.) bags.
Not sold in quantities of less than 0.46 kg. (1 lb.).
Cat. No.
CLS39509989
Pk/Cs
Qty/Cs
1 lb./2 bags
12 lb./24 bags
FILLING BELL
3965 PYREX Brand, Filling Bell, Aseptic
For aseptic filling of vessels. Rubber tubing is attached to the top of the tubulation while the
receiving vessel is placed inside the bell.
24
Cat. No.
For Use
with
Description
Tubulation
O.D. (mm)
Dimensions
O.D. x Height (mm)
Qty/Cs
CLS396520
CLS396550
CLS396570
CLS3965100
Tubes
Bottles
Bottles
Bottles
Filling Bell
Filling Bell
Filling Bell
Filling Bell
7.0
11.0
11.0
12.7
28 x 75
51 x 95
73 x 130
109 x 140
2
2
2
2
REUSABLE GLASS
FLASKS
4060 PYREX Brand, Florence, Boiling, Flat Bottom, Long Neck, Tooled Mouth
Cat. No.
Capacity
(mL)
Rubber
Stopper No.
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
50
125
250
500
1000
2000
6000
12000*
1
2
5
6
8
8
11
11
50 x 94
68 x 120
82 x 134
103 x 174
132 x 213
168 x 293
237 x 367
297 x 371
6
6
6
1
24
24
24
6
1
1
1
CLS406050
CLS4060125
CLS4060250
CLS4060500
CLS40601L
CLS40602L
CLS40606L
CLS406012L
*The 12000 mL size has a short neck.
4080 PYREX Brand, Florence, Boiling, Flat Bottom, Long Neck,

With full length outer
Cat. No.
Joint
joints.
Capacity
(mL)
Joint Size
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
250
500
24/40
24/40
82 x 154
103 x 195
6
6
12
12
Approx.
O.D. x Height (mm)
Qty/Pk
Qty/Cs
50 x 98
69 x 120
82 x 135
103 x 155
132 x 185
6
6
1
1
12
12
12
12
CLS4080250
CLS4080500
4100 PYREX Brand, Boiling, Flat Bottom, Short Neck,
Joint
With full length outer joints, but with shorter necks.

Cat. No.
CLS410050
CLS4100125
CLS4100250
CLS4100500
CLS41001L
Capacity
(mL)
50
125
250
500
1000
Joint
Size
24/40
24/40
24/40
24/40
24/40
4260 PYREX Brand, Boiling, Round Bottom, Short Ring Neck

Cat. No.
CLS4260500
CLS426012L
Capacity
(mL)
Rubber
Stopper No.
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
500
12000
6
11
102 x 160
295 x 378
1
1
4280 PYREX Brand, Boiling, Round Bottom, Long Neck, Tooled Mouth
Cat. No.
Capacity
(mL)
Rubber
Stopper No.
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
250
83 x 149
CLS4280250
4315 PYREX Brand, Flask, Pear-Shaped

These flasks are equipped with
Cat. No.
CLS43155
CLS431510
CLS431525
CLS431550
CLS4315100
25
Capacity
(mL)
5
10
25
50
100
14/20 outer joint.

Joint
Size
14/20
14/20
14/20
14/20
14/20
Approx.
O.D. x Height (mm)
Qty/Pk
Qty/Cs
25 x 50
31 x 58
40 x 78
46 x 87
60 x 115
2
2
2
1
12
12
12
1
REUSABLE GLASS
4320 PYREX Brand, Boiling, Round Bottom, Short Neck,
Joint
With full length joints, but with short necks.

Cat. No.
CLS432050
CLS4320100
CLS4320250
CLS4320500
CLS43201L
CLS43202L
Capacity
(mL)
50
100
250
500
1000
2000
Joint
Size
19/38
24/40
24/40
24/40
24/40
24/40
Approx.
O.D. x Height (mm)
Qty/Pk
Qty/Cs
49 x 98
65 x 120
83 x 140
102 x 160
127 x 189
162 x 220
2
2
2
2
1
1
12
12
12
12
12
6
The 100, 250, and 500 mL flasks are replacement parts for organic chemistry kits Cat. Nos. CLS6949 through CLS6949K.
4320A PYREX Brand, Boiling, Round Bottom, Short Neck,

Cat. No.
CLS4320A50
Joint
Capacity
(mL)
Joint
Size
Approx.
O.D. x Height (mm)
Qty/Cs
50
24/40
49 x 98
12
4320B PYREX Brand, Boiling, Round Bottom, Short Neck,

Cat. No.
CLS4320B25
CLS4320B50
CLS4320B100
CLS4320B250
CLS4320B500
Capacity
(mL)
25
50
100
250
500
Joint
Size
19/22
19/22
19/22
19/22
19/22
Joint
Approx.
O.D. x Height (mm)
Qty/Pk
Qty/Cs
42 x 72
49 x 81
65 x 95
83 x 120
102 x 139
1
1
12
1
1
These flasks are replacement parts for organic chemistry kits Cat. Nos. CLS6949 through CLS6949K.
4320C PYREX Brand, Boiling, Round Bottom, Short Neck, Heavy Wall,
Joint
PYREX heavy duty boiling flask provides increased mechanical strength. The flask features walls
which are 25-30% thicker than the standard version. O.D. dimensions have not been changed.
Cat. No.
CLS4320C50
CLS4320C250
CLS4320C500
Capacity
(mL)
50
250
500
Joint
Size
24/40
24/40
24/40
Approx.
O.D. x Height (mm)
Qty/Cs
49 x 61
83 x 140
102 x 160
1
1
1
4321 PYREX Brand, Boiling, Round Bottom, Short Neck,

Cat. No.
CLS4321100
CLS4321250
CLS4321500
CLS43211L
CLS43212L
26
Joint
Capacity
(mL)
T
S Joint
Size
Approx.
O.D. x Height (mm)
Qty/Cs
100
250
500
1000
2000
29/42
29/42
29/42
29/42
29/42
63 x 120
83 x 140
102 x 157
130 x 185
162 x 217
1
1
1
1
1
REUSABLE GLASS
4321A PYREX Brand, Boiling, Round Bottom, Short Neck,

Cat. No.
CLS4321A10
CLS4321A25
CLS4321A50
CLS4321A100
CLS4321A250
Capacity
(mL)
Joint
Size
10
25
50
100
250
Joint
Approx.
O.D. x Height (mm)
Qty/Pk
Qty/Cs
31 x 57
42 x 70
49 x 84
65 x 95
83 x 114
12
1
1
12
1
14/20
14/20
14/20
14/20
14/20
4420 PYREX Brand, Fernbach, Culture

This wide mouth flask is designed for culturing organisms requiring a large surface area to volume
ratio. It can also be used in serum production.
Cat. No.
CLS44202XL
Capacity
(mL)
Approx. Rubber
Stopper No.
Approx.
O.D. x Height (mm)
Qty/Cs
2800
13-14
205 x 230
Reference: Industrial and Engineering Chemistry, Vol. 21, No. 12, p. 1198. Note: Do not use this flask on a heat source smaller than the
base of the flask. Uneven heating of the flask could cause breakage.
4422 PYREX Brand, Culture, Low Form

This narrow mouth flask is designed for culturing organisms requiring a large surface area to volume ratio. The neck O.D. is 38 mm.
Cat. No.
CLS44222XL
Capacity
(mL)
Approx. Rubber
Stopper No.
Approx.
O.D. x Height (mm)
Qty/Cs
2500
6.5
254 x 197
Do not use this flask on a heat source smaller than the base of the flask. Uneven heating of the flask could cause breakage.
4423 PYREX Brand, Fernbach Culture Flask, Baffled, Beaded Neck

This wide-mouth flask is designed for culturing organisms requiring a large surface area to volume
ratio. Triple baffled on the bottom outside edges to achieve maximal oxygen transfer to culture
medium. Beaded neck is 63mm I.D. and accepts cotton plugs or rubber stoppers.
Cat. No.
CLS44232XL
Capacity
(mL)
Description
Rubber
Stopper No.
Dimensions
O.D. x Height (mm)
Qty/Cs
2800
Culture Flask
13
200 x 230
Do not place on a direct heat source.
4424 PYREX Brand, Fernbach Culture Flask, Baffled, Plain Neck

This triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple
baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture
medium. Closures are sold separately.
Cat. No.
CLS44242XL
Description
Capacity
(mL)
Neck
O.D.
(mm)
Dimensions
O.D. x
Height (mm)
Qty/Cs
Culture Flask with 38 mm O.D. Neck
2800
38
200 x 260
Caution: Do not place on a direct heat source.
4425 PYREX Brand, Fernback Culture Flask, Baffled, with Screw Cap
This wide mouth flask is designed for culturing organisms requiring a large surface area to volume
ratio. Triple baffled on the bottom outside edges to achieve maximal oxygen transfer to culture
medium. Supplied with GL45 orange polypropylene cap.
Cat. No.
CLS44252XL
Description
Capacity
(mL)
Dimensions
O.D. x Height (mm)
Qty/Cs
Culture
2800
200 x 230
Note: For replacement caps, see Cat. No. CLS139545LTC.

Caution: Do not place on a direct heat source.
27
REUSABLE GLASS
4442 PYREX Brand, Culture, Long Neck

The long neck culture flask is basically an Erlenmeyer flask to which a long straight, rimless neck of
heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching
the closure. It is ideal for shaker cultures.
Cat. No.
CLS444250
CLS4442125
CLS4442250
CLS44442500
CLS44421L
CLS44422L
CLS2679425*
CLS2679525*
CLS2679638**
CLS2679738**
Description
Approx. O.D. x
Height (mm)
Approx.
Neck O.D. (mm)
Qty/Pk
Qty/Cs
Flask 50 mL
Flask 125 mL
Flask 250 mL
Flask 500 mL
Flask 1000 mL
Flask 2000 mL
Closure, Orange
Closure, Natural
Closure, Orange
Closure, Natural
50 x 105
66 x 122
81 x 138
101 x 181
129 x 216
160 x 285
18
25
38
38
38
38
25
25
38
38
6
6
6
50
50
50
50
24
24
24
1
1
1
100
100
100
100
*Closure fits 125 mL size.

**Closure fits 250, 500, 1L, 2L.
4444 PYREX Brand, Baffled Shaker

Delong style, with three baffle indents designed to provide greater agitation of solutions to
improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck
reduces splashing and is designed for two-position polypropylene closures.
Cat. No.
CLS4444125
CLS4444250
CLS4444500
CLS44441L
CLS44442L
CLS44444L
CLS2679425
CLS2679525
CLS2679638
CLS2679738
Description
Neck O.D.
(mm)
Approx.
O.D. x Height (mm)
Qty/Pk
Qty/Cs
Flask
Flask
Flask
Flask, 1000 mL
Flask, 2000 mL
Flask, 4000 mL
Closure, Orange
Closure, Natural
Closure, Orange
Closure, Natural
25
38
38
38
38
38
25
25
38
38
70 x 140
85 x 155
100 x 200
130 x 240
160 x 282
210 x 350
50
50
50
50
6
6
6
6
1
1
100
100
100
100
4446 PYREX Brand, Shaker Flask, Extra-Deep Baffles

Delong style neck, with three extra-deep baffles, to enhance gas transfer when used with rotary or
reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene
closures. Closures are sold separately.
Cat. No.
CLS444650
CLS44462L
CLS44463L
CLS44464L
28
Description
Approx. O.D. x
Height (mm)
Approx. Neck
O.D. (mm)
Qty/Cs
Flask 50 mL
Flask 2000 mL
Flask 3000 mL
Flask 4000 mL
51 x 106
160 x 282
185 x 327
206 x 350
18
38
38
38
12
3
2
2
REUSABLE GLASS
4450 PYREX Brand, Erlenmeyer, Baffled

Heavy tooled rim for maximum durability. The same baffle design as found on our Delong flasks
promotes optimal and consistent solution agitation when used with flask shakers.
Cat. No.
CLS4450125
CLS4450250
CLS4450500
CLS44501L
Capacity
(mL)
Approx. O.D. x
Height. (mm)
Rubber
Stopper No.
Qty/Cs
125
250
500
1000
70 x 115
85 x 155
100 x 180
130 x 220
5
6
7
8.5
6
6
6
1
4460 PYREX Brand, Trypsinizing Flask, Beaded Neck, Baffled

Flasks are used for converting homogenous tissue samples into cell suspensions by digestion of
connective proteins. Heavy beaded neck accepts cotton plugs. Four extra-deep baffles enhance
vigorous agitation.
Cat. No.
CLS44602L
Description
Approx O.D.
x Height (mm)
Height of
Baffles (mm)
Qty/Cs
Flask, 1500 mL
160 x 290
125
4500 PYREX Brand, Glass Spinner Flask Complete, Baffled, Angled Sidearms
Baffled to enhance agitation of the contents of the flask. Dynamic Vortex impellers ensure high
performance stirring. Wide, angled sidearms permit easier entry of 25 mL and 50 mL pipets for
feeding and harvesting.
Cat. No.
CLS4500125
CLS4500250
CLS4500500
CLS45001L
CLS45003L
Description
Capacity
Center
Neck (mm)
Sidearm
Neck (mm)
Qty/Cs
Spinner
Spinner
Spinner
Spinner
Spinner
125 mL
250 mL
500 mL
1L
3L
70
70
100
100
100
32
32
45
45
45
1
1
1
1
1
4502 PYREX Brand, Glass Spinner Flask Complete, Baffled, Wide Mouth,
Angled Sidearms
performance stirring. Center neck is 120 mm for ease in setup and cleaning. The wide 45 mm
angled sidearms permit easier entry of 25 mL and 50 mL pipets for feeding and harvesting.
Cat. No.
CLS45023L
Description
Capacity
Center
Neck (mm)
Sidearm
Neck (mm)
Qty/Cs
Spinner
3L
120
45
4504 PYREX Brand, Glass Spinner Flask Complete, Baffled, Wide Mouth, Angled
Sidearms
performance stirring. Extra-wide center neck is 140 mm for ease in setup and cleaning. The wide
45 mm angled sidearms permit easier entry of 25 mL and 50 mL pipets for feeding and harvesting.
Unique Shur-Lok cap design on center neck has a compression gasket to ensure a tight seal of
the flask that can be visually confirmed after autoclaving.
Cat. No.
CLS45043L
29
Description
Capacity
Center
Neck (mm)
Sidearm
Neck (mm)
Qty/Cs
Spinner
3L
140
45
REUSABLE GLASS
4620 PYREX Brand, Distilling

The sidearm on all sizes, except 125 mL, is approximately 77 mm below the top of the neck at an
angle of 75. Adaptable for use with thermometers calibrated for 76 mm immersion. The sidearm
of the 125 mL flask is located approximately 137 mm from the bottom of the flask to meet the
requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Suitable
for microchemical applications.
Cat. No.
CLS4620125*
CLS4620250
CLS4620500
Capacity
(mL)
Rubber
Stopper No.
Approx. O.D. x
Height (mm)
Sidearm O.D. x
Length (mm)
Qty/Pk
Qty/Cs
125
250
500
2
3
4
69 x 214
86 x 250
102 x 268
7 x 100
9 x 130
9 x 130
6
4
24
24
1
*Heavy duty.
4720 PYREX Brand, Church, Distilling

For the distillation of bituminous materials suitable for road treatment. Also used in the Standard
Method of Test of the Distillation of Creosote Oil, American Wood Preservers Association,
method 11e, Barrett method C 9, American Association of State Highway Officials, methods
T 52 and T 62.
Cat. No.
CLS4720500
Capacity
(mL)
Rubber
Stopper No.
Approx. O.D. x
Height (mm)
Sidearm O.D. x
Length (mm)
Qty/Cs
500
102 x 135
13 x 220
4950 PYREX Brand, Distilling, Three Necks, Vertical Type,

The three necks are the same height. Each neck has a
Cat. No.
CLS4950500
CLS49501L
CLS49502L
Capacity
(mL)
500
1000
2000
Joint
Size
24/40 Joints
24/40 joint.
Approx.
O.D. x Height (mm)
Qty/Pk
Qty/Cs
102 x 160
130 x 185
162 x 215
1
1
1
4
4
4
24/40
24/40
24/40
4960 PYREX Brand, Distilling, Three Necks, Vertical Type,

With full length
Cat. No.
CLS4960250
CLS4960500
Joints
joints.
Capacity
(mL)
Center Neck
Joint
Side Neck
Joint
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
250
500
24/40
34/45
24/40
24/40
83 x 140
102 x 165
4
4
1
1
4960A PYREX Brand, Distilling, Three Necks, Vertical Type,
Joints
With full length joints.

Cat. No.
CLS4960A500
CLS4960A1L
CLS4960A2L
Capacity
(mL)
Center Neck
Joint
Side Neck
Joint
Approx. O.D. x
Height (mm)
Qty/Cs
500
1000
2000
29/42
29/42
29/42
24/40
24/40
24/40
102 x 160
130 x 185
162 x 217
1
1
1
4965 PYREX Brand, Distilling, Three Necks, Angle Type,

Cat. No.
CLS4965100
CLS4965250*
Joints
Capacity
(mL)
Center Neck
Joint
Side Neck
Joint
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
100
250
24/40
24/40
19/38
24/40
65 x 120
83 x 140
1
1
4
4
*The 250 mL flask is also a replacement part for organic chemistry kits Cat. Nos. CLS6949 through CLS6949K.
30
REUSABLE GLASS
4965A PYREX Brand, Distilling, Three Necks, Angle Type,

Cat. No.
Capacity
(mL)
CLS4965A500
CLS4965A1L
Joint
500
1000
Joints
Approx. O.D. x
Height (mm)
Qty/Cs
87 x 156
130 x 185
1
1
24/40
24/40
4980 PYREX Brand, Erlenmeyer, Narrow Mouth, Heavy Duty Rim, Graduated
Approximate graduations are in durable white enamel. An extra large marking space is also provided.
Heavy, durable top tooling.
Cat. No.
CLS498010
CLS498025
CLS498050
CLS4980125
CLS4980250
CLS4980300
CLS4980500
CLS49801L
CLS49801XL
CLS49802L
CLS49804L
CLS49806L
CLS4980PACK
Capacity
(mL)
Rubber
Stopper
No.
10
25
50
125
250
300
500
1000
1500
2000
4000
6000
Assortment Pack
00
0
1
5
6
6
7
9
9
10
10
10
Grad.
Range
(mL)
Grad.
Interval
(mL)
Approx.
O.D. x
Height (mm)
5-10
10-25
20-50
50-125
50-200
100-300
100-500
250-1000
400-1500
600-1800
1000-4000
1500-6000
5
5
10
25
25
25
50
50
100
200
500
500
31 x 50
41 x 65
51 x 78
67 x 114
82 x 132
89 x 144
101 x 176
129 x 216
149 x 244
160 x 268
206 x 360
241 x 410
Qty/Pk Qty/Cs
12
12
12
12
12
6
6
1
1
1
1
5
12
48
48
48
48
48
36
24
8
4
4
1
*A convenience pack containing one each of the most popular sizes of Cat. No. 4980 flask. Designed for the low volume user, a case
contains one each of five sizes; 50 mL, 125 mL, 250 mL, 500 mL, and 1L. Packaged in a partitioned carton for safe transit and storage.
4985 PYREX Brand, Erlenmeyer, Screw Cap, Graduated

These Erlenmeyer flasks with phenolic screw caps are ideal for culturing, mixing and storing
media. Impact resistant caps are equipped with cemented-in, inert white rubber liners which are
resistant to steam sterilization. Flasks are graduated and include marking space.
Cat. No.
CLS498550
CLS4985125
CLS4985250
CLS4985500
CLS49851L
Capacity
G.P.I.
Grad.
Grad.
Approx. O.D. x
(mL) Thread Finish Range (mL) Interval (mL) Height (mm) Qty/Pk Qty/Cs
50
125
250
500
1000
24-410
24-410
38-430M
38-430M
38-430M
20-50
50-125
50-200
100-500
250-1000
10
25
25
50
50
50 x 78
68 x 105
81 x 135
102 x 186
128 x 218
12
12
6
6
6
24
24
24
24
12
For cap only, see Cat. No. CLS9999.
4990 PYREX Brand, Erlenmeyer, Narrow Mouth, Graduated, Student Grade

Student grade, economy flask. Uniform wall thickness provides proper balance between mechanical
strength and thermal shock resistance. Approximate graduations are in durable enamel. All sizes
have a large triangular marking spot.
Cat. No.
CLS4990125
CLS4990250
CLS4990500
CLS49901L
31
Capacity
(mL)
Rubber
Stopper No.
Grad.
Range (mL)
Grad.
Interval (mL)
Approx. O.D. x
Height (mm)
Qty/Cs
125
250
500
1000
5
7
8
9
50-125
50-200
100-500
250-1000
25
25
50
50
67 x 119
82 x 137
101 x 183
129 x 221
12
12
6
6
REUSABLE GLASS
4995 PYREX Brand, Erlenmeyer, Wide-Mouth, Screw Cap, Graduated

Features a convenient single size plug-seal cap. Wide, 29mm neck opening makes it easy to use
larger volume serological pipets. Ideal product for all media prep and storage needs. Can be used
as vented culture flask when optional membrane cap is used.
Description
Approx. O.D. x
Height (mm)
Qty/Cs
Flask
Flask
Flask, 1000 mL
Flask, 2000 mL
Flask, 4000 mL
Flask, 6000 mL
81 x 140
102 x 185
128 x 225
160 x 268
206 x 335
235 x 395
6
6
6
1
1
1
Cat. No.
CLS4995250
CLS4995500
CLS49951L
CLS49952L
CLS49954L
CLS49956L
For replacement caps, O-Rings or Vented Membrane Cap, see Cat. No. CLS1395.
5000 PYREX Brand, Erlenmeyer, Narrow Mouth, Joint, Graduated

A range of Erlenmeyer flasks with joints. For convenience, these flasks are graduated to show
approximate capacity.
Cat. No.
Capacity
(mL)
Joint
Approx.
O.D. x Height (mm)
Qty/Pk
Qty/Cs
50
125
250
500
1000
19/38
24/40
24/40
24/40
24/40
48x98
67 x 120
81 x 161
101 x 198
129 x 233
6
6
6
1
1
12
12
12
12
CLS500050
CLS5000125
CLS5000250
CLS5000500*
CLS50001L
*Reference ASTM E-123.
5020 PYREX Brand, Erlenmeyer, Narrow Mouth, PYREX
Stopper, Graduated
For convenience, these flasks are graduated to show approximate capacity. The 25, 50 and 125 mL
flasks are satisfactory for use as a weighing bottle.
Cat. No.
CLS502025
CLS502050
CLS5020125
CLS5020250
CLS5020500
CLS50201L
Description
Capacity
(mL)
Approx. O.D. x
Height (mm)
Stopper
No.
Qty/Pk
Qty/Cs
Complete
Complete
Complete
Complete
Complete
Complete
25
50
125
250
500
1000
40 x 92
48 x 101
68 x 136
81 x 171
101 x 215
129 x 241
16
19
22
27
32
32
6
6
1
1
12
12
12
12
8
6
55020 PYREX Brand, Low Actinic, Erlenmeyer, Narrow Mouth, PYREX
Stopper
Low actinic stained glass provides protection for materials sensitive to light. The protective color
is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX Brand labware.
Cat. No.
CLS55020250
32
Description
Capacity (mL)
Complete
250
Stopper No.
27
Qty/Cs
REUSABLE GLASS
5100 PYREX Brand, Erlenmeyer, Heavy Duty Rim, Wide mouth, Graduated
A wide mouth flask especially recommended for use as a titration flask. For convenience, these
flasks are graduated to show the approximate capacity and have an extra large marking spot.
Cat. No.
CLS5100125
CLS5100250
CLS5100500
CLS51001L
CLS51002L
Capacity
(mL)
Rubber
Stopper No.
Grad.
Range (mL)
Grad.
Interval (mL)
Qty/Pk
Qty/Cs
125
250
500
1000
2000
6
8
10
11
13
50-125
50-200
100-500
250-1000
400-1800
25
25
50
50
100
12
12
6
6
1
48
48
36
24
8
5320 PYREX Brand, Filtering, Heavy Wall, Graduated

These flasks, without tubulation, are blown in special molds, in shapes designed to give maximum
mechanical strength. These flasks are graduated to show their approximate capacity. Marked
Filter Flask to avoid confusion with similar sizes of Erlenmeyer flasks. All flasks have permanent
white enamel graduations and marking spots.
Cat. No.
CLS5320250
CLS5320500
CLS53201L
CLS53202L
CLS53204L
Capacity
Grad.
(mL) Range (mL)
250
500
1000
2000
4000
75-250
150-500
300-1000
600-2000
1500-4000
Grad.
Rubber
Approx. O.D. x
Interval (mL) Stopper No. Height (mm)
25
50
50
200
500
6
7
8
9
12
Qty/Pk Qty/Cs
84 x 146
106 x 184
137 x 238
168 x 292
198 x 372
6
6
6
1
1
18
18
12
12
6
5340 PYREX Brand, Filtering, Heavy Wall, Tubulation, Graduated

These flasks, with tubulation, are blown in special molds, in shapes designed to give maximum
mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The
neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. on sizes up to 1000 mL is
10mm. Tubulation O.D. for 2000 mL and 4000 mL is 12.5 mm.
Cat. No.
CLS5340250
CLS5340500
CLS53401L
CLS53402L
CLS53404L
Capacity
(mL)
Grad.
Range
(mL)
Grad.
Interval
(mL)
Rubber
Stopper
No.
Approx.
O.D. x
Height (mm)
Qty/Pk
Qty/Cs
250
500
1000
2000
4000
75-250
150-500
300-1000
600-2000
1500-4000
25
50
50
200
500
6
7
8
9
12
84 x 146
106 x 184
137 x 238
168 x 292
198 x 356
6
6
6
1
1
18
18
12
12
6
65340 PYREXPLUS Brand, Filtering, Heavy Wall, Protective Coating,* Tubulation,

Graduated
Flask features a protective PVC coating for longer product life and safety. Protective coating helps
shock. For convenience, the flasks are graduated to show approximate capacity. Tubulation O.D.
is 10mm on sizes up thru 1000 mL. Tubulation O.D. is 12.5 mm on 2000 and 4000 mL sizes. The
tubulation is not coated to allow easy connection of standard size tubing.
Cat. No.
CLS65340250
CLS65340500
CLS653401L
CLS653402L
CLS653404L
Capacity
(mL)
Grad.
Range
(mL)
Grad.
Interval
(mL)
Rubber
Stopper
No.
Approx.
O.D. x
Height (mm)
Qty/
Pk
Qty/
Cs
250
500
1000
2000
4000
75-250
150-500
300-1000
600-2000
1500-4000
25
50
50
200
500
6
7
8
9
12
84 x 146
106 x 184
137 x 238
168 x 292
198 x 356
1
1
6
6
6
4
2
33
REUSABLE GLASS
5341 PYREX Brand, Filtering, Heavy Wall, Replaceable Tubulations

This filtering flask is a standard PYREX Brand heavy wall filtering flask into which is seated a bent,
poly tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber.All
flasks have permanent white enamel graduations and marking spots. The tubulation O.D. is 12.5 mm.
Description
Capacity
(mL)
Complete
Complete
Complete
Complete
Complete
Poly Tubulation with Grommet
250
500
1000
2000
4000
Cat. No.
CLS5341250
CLS5341500
CLS53411L
CLS53412L
CLS53414L
CLS5341PTO
Rubber
Approx.
Stopper
O.D. x
No.
Height (mm)
6
7
8
9
12
84 x 146
106 x 184
137 x 238
168 x 292
198 x 356
Qty/
Pk
Qty/
Cs
6
1
4
1
1
12
6
1
6
5360 PYREX Brand, Filtering, Micro, Tubulation

These small filtering flasks are recommended for microchemical use. All flasks have permanent
white enamel marking spots.
Cat. No.
CLS536025
CLS536050
CLS5360125
Capacity
(mL)
Tubl.
O.D. (mm)
Rubber
Stopper No.
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
25
50
125
8
8
10
3
4
5
40 x 75
51 x 85
70 x 110
6
6
6
18
18
18
5400 PYREX Brand, Iodine Determination, Pyrex
Stopper
PYREX brand iodine determination flasks are blown in specially designed molds, thereby insuring
uniformity and proper contour. The stopper projects above the liquid seal trough to facilitate
removal.
Cat. No.
Capacity
(mL)
CLS5400125
CLS5400250
CLS5400500
125
250
500
Stopper
No.
22
22
22
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
66 x 146
81 x 184
101 x 220
6
1
12
8
6
Reference: ASTM D-29 and D-555. See Cat. No. CLS7640N for stopper only.
5420 PYREX Brand, Kjeldahl, Round Bottom, Long Neck

Of all the common laboratory test methods, the Kjeldahl method for determining nitrogen subjects
the boiling flask to the most severe thermal and chemical abuse. These Kjeldahl flasks, specially
styled, have tooled finished necks for extra strength and uniform stopper fit. Wall thickness is
controlled to offer the optimum balance between thermal shock and chemical resistance. Can be
used in ASTM E-258 procedure. Care must be taken to ensure the bottoms of the flasks do not
come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring
supports for this purpose.
Cat. No.
Capacity
(mL)
Rubber
Stopper No.
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
100
800
2
7
55 x 210
117 x 365
6
6
24
18
CLS5420100
CLS5420800
34
REUSABLE GLASS
5580 PYREX Brand, Volumetric, Class A, Snap-Cap

The strength of these flasks has been increased appreciably through machine-blown bodies to
which are sealed heavy-beaded, heavy-tubing necks, tooled for snap-cap fit. The graduation line is
sharp and permanent and large white block letters make the inscription easy to read. The 1mL and
2mL sizes are test tube shaped. The 10 mL through 2000 mL sizes are supplied with snap-caps.
Cat. No.
CLS55801*
CLS55802*
CLS558010
CLS558025
CLS558050
CLS5580100
CLS5580200
CLS5580250
CLS5580500
CLS55801L
CLS55802L
Capacity
(mL)
Tol.
( mL)
Approx. O.D. x
Height (mm)
Snap-Cap
No.
Qty/Pk
Qty/Cs
1
2
10
25
50
100
200
250
500
1000
2000
0.01
0.015
0.02
0.03
0.05
0.08
0.10
0.12
0.20
0.30
0.50
10 x 55
9 x 85
28 x 78
40 x 100
51 x 130
60 x 160
74 x 198
78 x 225
100 x 259
125 x 310
158 x 357
10
25
50
100
200
250
500
1000
2000
6
6
6
6
6
6
6
6
1
1
12
12
12
12
12
12
12
12
12
6
4
*No snap-cap supplied. See Cat. No. CLS7666 for snap cap.
5581 PYREX Brand, Volumetric, Student Grade, Snap-Cap

These student grade, economy flasks are designed for use in schools that do not require the precision accuracy of our Class A capacity flasks. The shape, body and wall are the same as regular
flasks but display the large triangular marking spot and designation Student Flask unique to
the student line. Capacity tolerances are twice those specified for Class A volumetric ware. The
graduation line is sharp and permanent; large white block letters make inscriptions easy to read.
Snap-caps are supplied with all sizes.
Cat. No.
CLS558110
CLS558150
CLS5581100
CLS5581250
CLS5581500
CLS55811L
Capacity
(mL)
Tolerance
( mL)
Approx. O.D. x
Height (mm)
Snap Cap
No.
Qty/Pk
Qty/Cs
10
50
100
250
500
1000
0.04
0.10
0.16
0.24
0.40
0.60
28 x 78
51 x 130
60 x 160
78 x 225
100 x 259
125 x 310
10
50
100
250
500
1000
6
6
6
6
1
12
12
12
12
12
6
*No snap-cap supplied. See Cat. No. CLS7666 for snap cap.
65640 PYREXPLUS Brand, Volumetric, Class A, Protective Coating*,

PYREX Stopper
Flask features a protective PVC coating for longer product life and safety. Protective coating helps
shock. The graduation mark is easy to read. Supplied with PYREX stopper.
Cat. No.
CLS65640100
CLS65640200
CLS65640500
CLS656401L
CLS656402L
Description
Capacity
(mL)
Complete
Complete
Complete
Complete
Complete
100
200
500
1000
2000
Tol.
Approx. O.D. x
( mL) Height (mm)
0.08
0.10
0.20
0.30
0.50
60 x 181
74 x 214
100 x 287
125 x 342
158 x 388
Stopper
No.
Qty/Pk
13
13
19
22
27
6
6
6
1
1
Qty/Cs
12
12
12
4
2
For stopper only, see Cat. No. CLS7650. Do not place over direct heat or flame. Do not heat above 121C moist heat or 110C dry heat.
35
REUSABLE GLASS
55635 PYREX Brand, Low Actinic, Volumetric, Class A, Wide Mouth, Heavy Duty,
PYREX Stopper
Low actinic stained glass provides protection for materials sensitive to light. The protective
color is an integral part of the flask, which retains the mechanical strength, chemical stability and
thermal resistance of the PYREX brand labware. The heavy duty, wide mouth accommodates pipet
filling and mixing. Easy to read graduation line is sharp and permanent. Designed for microchemical work and calibrated to Class A Tolerance. Each flask features a PYREX stopper.
Cat. No.
Capacity
(mL)
Approx. O.D.
x Height (mm)
Stopper
No.
Qty/Cs
25
50
40 x 100
51 x 130
13
13
6
6
CLS5563525
CLS5563550
55640 PYREX Brand, Low Actinic, Volumetric, Class A, PYREX
Stopper
Low actinic stained glass provides protection for materials sensitive to light. The protective color is
an integral part of the flask, which retains the mechanical strength, chemical stability and thermal
resistance of PYREX Brand labware.
Cat. No.
CLS5564010
CLS5564025
CLS5564050
CLS55640100
CLS55640500
CLS556401L
Capacity
(mL)
Tol.
(mL)
Approx. O.D. x
Height (mm)
10
25
50
100
500
1000
0.02
0.03
0.05
0.08
0.20
0.30
28 x 99
40 x 121
51 x 151
60 x 181
100 x 287
125 x 342
Stopper
No.
Qty/Pk
Qty/Cs
6
6
6
12
12
12
12
1
1
9
9
9
13
19
22
5600 PYREX Brand, Lifetime Red, Volumetric, Class A, Snap-Cap, Graduated,

Calibrated To Contain
The capacity mark is a fine line etched through a narrow red band into clear glass, making a filler
unnecessary and giving high legibility, accuracy, and permanence. Snap-caps supplied with all sizes.
Cat. No.
CLS560025
CLS560050
CLS5600100
CLS5600200
CLS5600250
CLS5600500
CLS56001L
CLS56002L
Capacity
(mL)
Tol.
( mL)
Approx. O.D. x
Height (mm)
Snap-Cap
No.
Qty/Pk
Qty/Cs
25
50
100
200
250
500
1000
2000
0.03
0.05
0.08
0.10
0.12
0.20
0.30
0.50
40 x 100
51 x 130
60 x 160
74 x 198
78 x 225
100 x 259
125 x 310
158 x 357
25
50
100
200
250
500
1000
2000
6
6
6
6
6
6
1
1
12
12
12
12
12
12
6
4
See Cat. No. CLS7666 for snap cap.
36
REUSABLE GLASS
5630 PYREX Brand, Volumetric, Class A, Micro, Hexagonal Base, PYREX
Stopper
Volumetric flasks for microchemical work, sizes 1 through 5 mL, are designed in accordance with
the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the
A.C.S. To improve the stability of this small flask, a hexagonal base, similar to those on all cylinders, has been added. The graduation line is sharp and permanent. The white markings are easy
to read.
Cat. No.
CLS56301
CLS56302
CLS56305
CLS563010
CLS563025
Capacity
(mL)
Tol.
( mL)
Approx. O.D. x
Height (mm)
1
2
5
10
25
0.01
0.015
0.02
0.02
0.03
8 x 68
12 x 71
17 x 80
20 x 105
29 x 132
Stopper
No.
Qty/Pk
Qty/Cs
12
12
12
12
12
8
8
8
9
9

5631 PYREX Brand, Volumetric, Class A, Corning Certified and Serialized, Micro,
PYREX Stopper
Calibrated to Class A Tolerance and individually serialized and supplied with a Certificate of
Identification and Capacity. To improve the stability of this flask, a hexagonal base has been added.
The graduation line is sharp and permanent and the white markings are easy to read. Each flask
features a PYREX stopper.
Cat. No.
CLS56312
CLS563110
CLS563125
Capacity
(mL)
Tol.
( mL)
Approx. O.D
x Height (mm)
Stopper
No.
Qty/Cs
2
10
25
.015
0.02
0.03
12 x 71
20 x 105
29 x 132
8
9
9
6
6
6
5635 PYREX Brand, Flask, Volumetric, Class A, Wide Mouth, Heavy Duty,
PYREX Stopper
Designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Easy
to read graduation line is sharp and permanent. Supplied with interchangeable standard taper
ground glass stoppers.
Cat. No.
CLS563510
CLS563525
CLS563550
CLS5635100
CLS5635200
CLS5635250
Capacity )
(mL
Approx. O.D. x
Height (mm)
Standard Taper
Stopper No.
Qty/Cs
10
25
50
100
200
250
48 x 135
40 x 100
51 x 130
66 x 160
72 x 170
87 x 180
13
13
13
16
19
19
6
6
6
6
6
6
For replacement stopper only, see Cat. No. CLS765013.
37
REUSABLE GLASS
5640 PYREX Brand, Volumetric, Class A, PYREX
Stopper
which are sealed heavy-tubing necks tooled for glass stoppers. The graduation line is sharp and
permanent and large white block letters make the inscription easy to read. The 1 mL and 2 mL
sizes are test tube shaped. Sizes 3L thru 6L have pennyhead stoppers.
Cat. No.
CLS56401
CLS56402
CLS56405
CLS564010
CLS564025
CLS564050
CLS5640100
CLS5640200
CLS5640250
CLS5640500
CLS56401L
CLS56402L
CLS56403L
CLS56404L
CLS56405L
CLS56406L
CLS564050FO
CLS5640200FO
Capacity
Description
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Flask only
Flask only
Tol. Approx. O.D. x

Stopper
( mL)
(mL)
Height (mm)
1
2
5
10
25
50
100
200
250
500
1000
2000
3000
4000
5000
6000
50
200
0.01
0.015
0.02
0.02
0.03
0.05
0.08
0.10
0.12
0.20
0.30
0.50
1.0
1.0
1.5
2.0
9 x 79
9 x 114
26 x 91
28 x 99
40 x 121
51 x 151
60 x 181
74 x 214
78 x 252
100 x 287
125 x 342
158 x 388
180 x 440
205 x 480
225 x 510
230 x 550
No.
Qty/Pk Qty/Cs
8
8
8
9
9
9
13
13
16
19
22
27
32
38
38
38
6
6
6
6
6
6
1
1
12
12
12
12
12
12
12
12
12
12
6
4
1
1
1
1
1
1
For stopper only on sizes 1 mL thru 2L, see Cat. No. CLS7650; for sizes 3L thru 6L, see Cat. No. CLS7660.
5641 PYREX Brand, Volumetric, PYREX
Stopper
Economy flasks designed for those that do not require the precision accuracy of our Class A capacity flasks. Capacity tolerances are twice those specified for Class A volumetric ware. The graduation line is sharp and permanent; large white block letters make inscriptions easy to read. Supplied
with interchangeable ground glass stoppers.
Cat. No.
CLS564110
CLS564125
CLS564150
CLS5641100
CLS5641200
CLS5641250
CLS5641500
CLS56411L
CLS56412L
Capacity
(mL)
Tol.
( mL)
Approx.
O.D. x Height (mm)
10
25
50
100
200
250
500
1000
2000
0.04
0.06
0.10
0.16
0.20
0.24
0.40
0.60
1.0
28 x 99
40 x 121
51 x 151
60 x 181
74 x 214
78 x 252
100 x 287
125 x 342
158 x 388
Stopper
No.
Qty/Pk
Qty/Cs
6
6
6
6
6
6
1
1
12
12
12
12
12
12
12
6
4
9
9
9
13
13
16
19
22
27
38
REUSABLE GLASS
5642 PYREX Brand, Volumetric, Class A, Polyethylene Stopper

which are sealed heavy-beaded, heavy-tubing necks, tooled for polyethylene stopper. The stopper
is made with a closed bottom and is of linear high density polyethylene to conform to stopper
dimensions. The graduation line is sharp and permanent and large white block letters make the
inscription easy to read. The 2 mL size is test tube shaped.
Cat. No.
CLS56425
CLS564210
CLS564225
CLS564250
CLS5642100
CLS5642200
CLS5642250
CLS5642500
CLS56421L
CLS56422L
Capacity
(mL)
Tol.
( mL)
Approx.
O.D. x Height (mm)
5
10
25
50
100
200
250
500
1000
2000
0.02
0.02
0.03
0.05
0.08
0.10
0.12
0.20
0.30
0.50
26 x 91
28 x 99
40 x 121
51 x 151
60 x 181
74 x 214
78 x 252
100 x 287
125 x 342
158 x 388
Stopper
No.
Qty/Pk
Qty/Cs
6
6
6
6
6
6
1
1
1
12
12
12
12
12
12
12
6
4
8
9
9
9
13
13
16
19
22
27
5644 PYREX Brand, Volumetric, Class A, PTFE Stopper

The strength of the flasks have been significantly increased through machine-blown bodies, which
are sealed to heavy-tubing necks. The graduation line is sharp and permanent. Large white block
letters make the inscription easy to read. Supplied with PTFE color-coded, keyhole stoppers.
Cat. No.
CLS56445
CLS564410
CLS564425
CLS564450
CLS5644100
CLS5644200
CLS5644250
CLS5644500
CLS56441L
Capacity
(mL)
Tol.
( mL)
Approx. O.D.
x Height (mm)
Stopper
No.
Qty/Pk
Qty/Cs
5
10
25
50
100
200
250
500
1000
0.02
0.02
0.03
0.05
0.08
0.10
0.12
0.20
0.30
26 x 91
28 x 99
40 x 121
51 x 151
59 x 181
74 x 219
78 x 252
100 x 287
125 x 342
8
9
9
9
13
13
16
19
22
6
6
6
6
6
6
1
12
12
12
12
12
12
12
12
6
5660 PYREX Brand, Lifetime Red, Volumetric, Class A, PYREX
Stopper
The capacity mark is a fine line etched through a narrow red band into clear glass, making a filler
unnecessary and giving high legibility, accuracy and permanence. With stopper. Calibrated to
contain.
Cat. No.
CLS566025
CLS566050
CLS5660100
CLS5660200
CLS5660250
CLS5660500
CLS56601L
CLS56602L
Description
Capacity
(mL)
Tol.
( mL)
Approx. O.D. x
Height (mm)
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
25
50
100
200
250
500
1000
2000
0.03
0.05
0.08
0.10
0.12
0.20
0.30
0.50
40 x 122
51 x 152
60 x 182
74 x 214
78 x 253
100 x 289
125 x 344
158 x 309
Stopper
No.
Qty/Pk
9
9
13
13
16
19
22
27
39
6
6
6
6
6
6
1
1
Qty/Cs
12
12
12
12
12
12
6
4
REUSABLE GLASS
5670 PYREX Brand, Volumetric, Class A, Square, PTFE Stopper

The square design flasks have a width less than the widest diameter of the usual round flasks.
Square flasks are easier to handle, require less space (15 to 20%) on the shelf and are ideal for
sampling and storage. The graduation line is sharp and permanent and calibrated to contain.
Large white block letters make the inscription easy to read. Each flask features a PTFE stopper.
s
T16
0.10
mL
200mL No. 5670
TC
20C
PYREX
Cat. No.
CLS5670500
Capacity
(mL)
Tol.
( mL)
Approx. O.D.
x Height (mm)
Stopper
No.
Qty/Cs
500
0.20
72 x 300
19
For stopper only, see No. 7630
5671 PYREX Brand, Volumetric, Class A, TC/TD, Square, PTFE Stopper

Like the 5670 flask but Calibrated to contain and To Deliver. The graduation lines are sharp
and permanent with large white block letters make the inscription easy to read. Flask is supplied
with a PTFE stopper.
Cat. No.
s
T16
A
TC
20C
0.10
mL
200mL No. 5670
PYREX
CLS5671900
Capacity
(mL)
Tol.
( mL)
Approx. O.D.
x Height (mm)
Stopper
No.
Qty/Cs
900
0.30
86 x 330
22
5680 PYREX Brand, Volumetric, Class A, Corning Certified and Serialized,

PYREX Stopper
Calibrated to Class A tolerances in accordance with ASTM E-542 and E-288. Each flask is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST
standards. The graduation line is sharp and permanent and large white block letters make the
inscription easy to read. Supplied with a stopper.
Cat. No.
CLS568010
CLS568025
CLS568050
CLS5680100
CLS5680200
CLS5680250
CLS5680500
CLS56801L
CLS56802L
Description
Capacity
(mL)
Tolerance
( mL)
Approx. O.D. x
Height (mm)
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Complete
10
25
50
100
200
250
500
1000
2000
0.02
0.03
0.05
0.08
0.10
0.12
0.20
0.30
0.50
28 x 99
40 x 122
51 x 152
60 x 182
74 x 214
78 x 253
100 x 288
125 x 344
158 x 390
Stopper
No.
Qty/Cs
9
9
9
13
13
16
19
22
27
1
1
1
1
1
1
1
1
1
5780 PYREX Brand, Kohlrausch, Volumetric, Class A

With an enlarged neck, 200-mL size conforms to ASTM D-1665 requirements.
Cat. No.
CLS5780100
CLS5780200
40
Capacity
(mL)
Tol.
( mL)
Approx. O.D.
x Height (mm)
Qty/Cs
100
200
0.08
0.10
59 x 160
74 x 200
1
1
REUSABLE GLASS
5820 PYREX Brand, Class A, Mixing Volumetric Flask

The upper bulb, located between the stopper and the capacity graduation is approximately onetenth the flask rated capacity. The 2L size upper bulb is only one-twentieth capacity. The additional bulb assists in the mixing of liquids or powders when shaken.
Cat. No.
CLS582050
CLS5820100
CLS5820250
CLS5820500
CLS58202L
Capacity
(mL)
Tol.
(mL)
Approx. O.D. x
Height (mm)
50
100
250
500
2000
0.05
0.08
0.12
0.20
0.50
48 x 155
60 x 185
78 x 256
100 x 322
158 x 397
Stopper
No.
Qty/Pk
Qty/Cs
1
12
1
1
1
9
13
16
19
27
5840 PYREX Brand, Volumetric, Phosphoric Acid, Wide Neck

For use in determining phosphoric acid in mixed fertilizer. Of heavy construction throughout and
with a wide neck.
Cat. No.
CLS5840200
CLS5840250
Capacity
(mL)
Tol.
( mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
200
250
0.18
0.18
74 x 152
78 x 170
6
6
12
12
F U N N E L S , S E PA R ATO R Y
6060 PYREX Brand, Buchner, Perforated Plate
These funnels are suitable for vacuum filtration; however, the translucent plate should not be
subjected to a pressure differential in excess of 1 atmosphere. The clear glass bodies afford
visual examination during use and cleaning. The size number indicates filter paper diameters in
millimeters. 10 mm stem O.D.
Cat. No.
CLS606090
41
Approx.
Size (mm)
Approx.
Height Above
Plate (mm)
Approx.
Total
Height (mm)
Stem O.D. x
Height (mm)
Qty/Pk
Qty/Cs
90.0
90
240
20 x 100
REUSABLE GLASS
36060 PYREX Brand, Buchner, with Fritted Disc

These funnels are especially useful where filter paper would be attacked by the material being filtered.
The disc should not be subjected to pressure differential in excess of 1 atmosphere. The top edge
is beaded.
Cat. No.
CLS360602C
CLS360602M
CLS3606015C
CLS3606015F
CLS3606015M
CLS3606030C
CLS3606030F
CLS3606030M
CLS3606060C
CLS3606060F
CLS3606060M
CLS36060150C
CLS36060150F
CLS36060150M
CLS36060350C
CLS36060350F
CLS36060350M
CLS36060600C
CLS36060600F
CLS36060600M
CLS360602LC
CLS360602LM
CLS360603LC
CLS360603LM
Capacity (mL) Diam.

and
of Disc
Porosity
(mm)
2C
2M
15C
15F
15M
30C
30F
30M
60C
60F
60M
150C
150F
150M
350C
350F
350M
600C
600F
600M
2000C
2000M
3000C
3000M
Approx.
Height
Above
Disc (mm)
Approx.
Stem
Length x
O.D. mm
30
30
47
47
47
47
47
47
58
58
58
50
50
50
75
75
75
90
90
90
165
165
175
175
31 x 7
31 x 7
75 x 8
75 x 8
75 x 8
75 x 8
75 x 8
75 x 8
75 x 10
75 x 10
75 x 10
75 x 15
75 x 15
75 x 15
75 x 20
75 x 20
75 x 20
100 x 20
100 x 20
100 x 20
110 x 25
110 x 25
110 x 25
110 x 25
10
10
20
20
20
30
30
30
40
40
40
60
60
60
80
80
80
90
90
90
127
127
152
152
Approx.
Total
Height (mm) Qty/Pk Qty/Cs
70
70
136
136
136
139
139
139
160
160
160
154
154
154
180
180
180
229
229
229
330
330
355
355
1
1
9
9
6
6
6
6
6
6
6
6
6
4
4
4
3
3
3
3
1
3
2
2
1
1
6100 PYREX Brand, Plain 60 Angle, Long Stem, Large Size

Stems are approximately 15 mm O.D. by 150 mm (6") long.
Cat. No.
CLS61005
CLS61006
Approx. Top Inside Dia. (mm)
Approx. Length (mm)
Qty/Pk
Qty/Cs
122
147
250
272
6
6
12
12
6120 PYREX Brand, Plain 60 Angle, Short Stem, Large Size

Stems are approximately 15 mm O.D. by 100 mm (4") long.
Cat. No.
CLS61205
CLS61206
42
Approx. Top
Inside Diam. (mm)
Approx.
Length (mm)
Qty/Pk
Qty/Cs
122
147
199
228
6
6
12
12
REUSABLE GLASS
6140 PYREX Brand, Plain 60 Angle, Long Stem

These funnels have a beaded edge for strength. They are fabricated from blanks formed to a 60
angle, which permits accurate fitting of the filter paper, thus reducing filtering time. The stems are
made of heavy wall tubing approximately 150 mm (6") long.
Cat. No.
Approx. Top
Inside Diam. (mm)
Approx. Stem
O.D. (mm)
Approx. Overall
Length (mm)
Qty/Cs
50
65
75
100
8
8
8
9
193
206
214
236
12
12
12
6
CLS614050
CLS614065
CLS614075
CLS6140100
6160 PYREX Brand, Fluted, 60 Angle, Long Stem

Have a strong beaded edge. These funnels are fabricated from blanks formed to a 60 angle. In
addition, they have depressed inside flutings which further decrease filtering time.
Cat. No.
Approx. Top
Approx. Stem
Inside Diam. (mm) Length x O.D. (mm)
CLS616065
CLS616075
65
75
Approx. Overall
Length (mm)
Qty/Pk
Qty/Cs
206
214
12
12
150 x 8
150 x 8
6180 PYREX Brand, Fluted, 60 Angle, Short Stem

Supplied with short stems. Depressed inside flutings further decreases filtering time.
Cat. No.
CLS618050
CLS618065
CLS618075
CLS6180100
Approx. Top
Inside Diam. (mm)
Approx. Stem
Length x O.D. (mm)
Approx. Overall
Length (mm)
Qty/Pk
Qty/Cs
50
65
75
100
65 x 8
65 x 8
75 x 8
100 x 9
108
121
139
190
12
12
12
6
48
48
48
24
36210 PYREX Brand, Hirsch Type, Fritted Disc

This type is very useful in preparation work, or in making separations where it is necessary to wash
the precipitate and redissolve with chemicals which would attack filter paper. The angle of the funnel body facilitates the removal of precipitates.
Cat. No.
CLS3621050M
Approx. Top
Approx. Dia of Approx. Stem O.D.
Approx.
Dia. (mm) Porosity
Disc (mm)
x Length (mm) Length (mm) Qty/Cs
50M
50M
20
8 x 75
118
6220 PYREX Brand, Plain Filling, Powder

With a short stem. For use in transferring powders or filling bottles.
Cat. No.
CLS622065
CLS622075
CLS6220100
CLS6220125
CLS6220150
43
Approx.
I.D. (mm)
Approx. Stem
Length x O.D. (mm)
Total
Length (mm)
Qty/Pk
Qty/Cs
65
75
100
125
150
25 x 15
30 x 17
30 x 20
35 x 25
35 x 30
83
94
120
132
157
12
12
6
6
6
24
24
24
12
12
REUSABLE GLASS
6240 PYREX Brand, Plain Stemless

Of molded construction with bottom ground flat; for use in the sugar industries. All have 6 mm
opening.
Cat. No.
Approx. I.D. (mm)
Approx. Length (mm)
Qty/Pk
Qty/Cs
75
100
60
82
12
48
1
CLS624075
CLS6240100
6302 PYREX Brand, Squibb, Separatory, PYREX Stopper, Rotaflo Stopcock

Features the Rotaflo stopcock and the strong, PYREX hollow stopper. A poly stopper is also
included for your convenience. Stem O.D. is 10 mm.
Cat. No.
CLS6302500
Size (mL)
Body Diam.
(mm)
Total Length
(mm)
Stopper No.
Rotaflo
Plug
Qty/Cs
500
98
385
27
GP-6
For glass stopper only, see Cat. No. CLS7650. For poly stopper only, see Cat. No. CLS7624.
6400 PYREX Brand, Squibb, Separatory, Pear-Shaped, PYREX
Cat. No.
CLS640030
CLS6400125
CLS6400250
CLS6400500
CLS64001L
CLS64002L
CLS64004L
Capacity Stopper Stopcock

(mL)
No.
Plug Size
30
125
250
500
1000
2000
4000
9
22
22
27
27
38
38
2
2
2
4
4
6
8
Stopper,
Stopcock
Body
O.D.
(mm)
Approx. O.D. x
Length of
Stem Below
Stopcock
Approx.
Total
Length
(mm)
Qty/Pk
Qty/Cs
40
60
77
98
119
152
206
10 x 65
10 x 65
10 x 65
10 x 65
10 x 65
12 x 65
14 x 65
216
279
311
354
392
496
629
1
1
1
1
6
4
4
1
1
1

For returning clip only, see Cat. No. CLS7280.
6402 PYREX Brand, Squibb, Separatory, Pear-Shaped, PYREX

Stopcock
Stopper,
Teflon
The Teflon plug fits into the micro-finish barrel. The plug also reduces freezing problems and
grease contamination.
Approx.
O.D. x
Stopcock
Cat. No.
CLS640260
CLS6402125
CLS6402250
CLS6402500
CLS64021L
CLS64022L
Approx.
Length of Total
Description
Complete
Complete
Complete
Complete
Complete
Complete
Capacity Stopper
(mL)
No.
60
125
250
500
1000
2000
16
22
22
27
27
38
Plug
Size
Stem Below
Stopcock (mm)
2
2
4
4
4
6
10 x 65
10 x 65
10 x 65
10 x 65
10 x 65
12 x 65
44
Length Qty/ Qty/

(mm)
Pk
Cs
225
280
311
355
392
496
1
1
1
1
4
4
4
4
1
1
REUSABLE GLASS
66402 PYREXPLUS Brand, Squibb, Separatory, Pear-Shaped, Protective Coating*,

PYREX Stopper, Teflon Stopcock
Features a protective PVC coating for longer product life and safety. Protective coating helps
shock. It features a Teflon stopcock which reduces freezing problems and grease contamination.*
Approx.
O.D. x
Stopcock
Cat. No.
CLS66402125
CLS66402250
CLS66402500
CLS664021L
CLS664022L
Total
Capacity Stopper
Description (mL)
No.
Approx.
Length of
Complete
Complete
Complete
Complete
Complete
125
250
500
1000
2000
Plug
Size
22
22
27
27
38
Stem Below
Length
Stopcock (mm) (mm)
2
4
4
4
6
10 x 65
10 x 65
10 x 65
10 x 65
12 x 65
Qty/
Pk
Qty/
Cs
1
1
1
4
4
4
1
1
280
311
355
392
496
For stopper only, see Cat. No. CLS7650. Do not place over direct heat or flame.
Do not heat above 121C moist heat or 110C dry heat.
Covered by U.S. Patent #4940613.
6404 PYREX Brand, Squibb, Separatory, Pear-Shaped, Polyethylene Stopper,

Stopcock
Teflon
The stopper is made with a closed bottom and is of linear high density polyethylene to conform
to stopper dimensions.
Stopcock
Cat. No.
CLS640460
CLS6404125
CLS6404250
CLS6404500
CLS64041L
CLS64042L
Total
Capacity Stopper
Description (mL)
No.
Approx.
O.D. x
Approx.
Plug
Size
Stem Below
Stopcock (mm)
Length
(mm)
2
2
4
4
4
6
10 x 65
10 x 65
10 x 65
10 x 65
10 x 65
12 x 65
244
289
311
354
392
486
Length of
Complete
Complete
Complete
Complete
Complete
Complete
60
125
250
500
1000
2000
16
22
22
27
27
38
Qty/Pk Qty/Cs
1
1
1
1
4
4
4
4
1
1
6413 PYREX Brand, Squibb, Separatory,

Cat. No.
CLS6413125
45
Teflon Stopcock
Description
Capacity
(mL)
Stopcock
Plug Size
Joint Size
Inner/Outer
Approx.
Height (mm)
Complete
125
19/22
238
Qty/Pk Qty/Cs
REUSABLE GLASS
H E AT E R S
16790 VYCOR Brand, Immersion
VYCOR brand immersion heaters are ideal for heating acids and plating solutions and for general
laboratory heating purposes. They heat quickly and efficiently by infrared radiation, as well as by
conduction and convection, and continuously heat at maximum temperature as long as plugged in.
Only the glass portion should be immersed. The electrical heating element is enclosed in a red
sheath made of 96% silica glass which completely shields the heating section. The unit is equipped
with a cord and is ready to plug in. The corrosion resistance of the VYCOR brand jacket, even at
elevated temperatures, assures freedom from chemical contamination. The upper portion (unheated
length) of the unit can be rested against the side of the beakers, water baths or other glass vessels.
The heater cord is approximately 1.5 m long. To ensure long life, scale build-up should be removed
periodically. Usage warnings and cleaning instructions are packed with each unit.
Cat. No.
Watts
Volts
CLS16790250
CLS16790500
CLS167901L
250
500
1000
120
120
120
Approx.
Approx.
O.D.
Heated
(mm)
Length (mm)
9
17
19
Approx.
Total
Length (mm)
Approx.
Surface
Temp. (C)
Qty/Cs
356
457
455
330
330
430
1
1
1
140
175
187
JARS
6884 PYREX Brand, Display
Used to display exhibits, particularly in museums and medical schools. Designed with uniform
walls and a heavy flared base that does not exceed the jar diameter. Each jar features a cork.
Cat. No.
CLS68842
CLS68844
Capacity
(Oz)
Capacity
(mL)
Approx. O.D.
x Height (mm)
Qty/Cs
2
4
59
118
35 x 105
50 x 115
12
12
6885 PYREX Brand, Bell, with Knob

PYREX brand bell jars are made from specially selected mold-blown blanks. The bottom flange
has a finely ground finish to assure tight sealing with ground glass plates.Rated 1-Atmosphere
Vacuum. Do not use with heat or pressure applications.
Cat. No.
CLS6885222
Approx. O.D. x
Height (mm)
Approx.
I.D. (mm)
Qty/Pk
Qty/Cs
222 x 425
213
6902 PYREX Brand, Cloud and Pour Point, Graduated

Single line encircles the jar at a point approximately 51 mm above the bottom to assist in
measuring the sample.Reference: ASTM D-97, D-1500, D-2500.
46
Cat. No.
Qty/Pk
Qty/Cs
CLS6902
35 x 121
12
36
REUSABLE GLASS
6941 PYREX Brand, Animal

Recommended for use as animal jars or for other purposes where resistance to hot air and steam
sterilization is of importance. These jars are blown with walls approximately 4.5 mm (3/16") thick.
The open ends are finished with a fire-polished bead to increase mechanical strength. Jars listed
under Cat. No. 6942 can also be used as animal jars. Do not use with heat, pressure or vacuum
applications.
Cat. No.
CLS69413L
Approx. O.D. x
Height (mm)
Approx. O.D. x
Height (Inches)
Approx.
Capacity (Liters)
Qty/Cs
152 x 203
6x8
2.8
Not intended for vacuum applications.
6942 PYREX Brand, Cylindrical, Plain

These jars are mold-blown with substantial walls for mechanical strength. The open end of the
152 mm diameter jars is fire-polished, while all other sizes have the open end ground. These jars
can also be used as animal jars. Do not use with heat, pressure, or vacuum applications.
Cat. No.
CLS69427L
CLS69429L
CLS694217L
CLS694227L
CLS694232L
Approx. O.D. x
Height (mm)
Approx. O.D. x
Height (Inches)
Capacity
(Liters)
Qty/Pk
Qty/Cs
222 x 254
257 x 254
305 x 305
305 x 457
406 x 305
8 3/4 x 10
10
12 x 12
12 x 18
16 x 12
7.5
9.5
17.0
26.5
32.0
4
1
1
1
1
6944 PYREX Brand, Rectangular, Chromatography

Ground to the close tolerances needed for tight cover fit. Jar edges are ground flat within 0.25 mm.
Covers are not supplied. Do not use with heat, pressure or vacuum applications.
Cat. No.
CLS69444L
CLS694411L
Approx.
LxWxD (mm)
Approx.
LxWxD (Inches)
Capacity
(Liters)
Qty/Cs
137 x 162 x 267

181 x 238 x 324
5 3/8 x 6 3/8 x 10 1/2

9 3/8 x 7 1/8 x 12 3/4
3.8
11.4
6
1
KETTLES
6947 PYREX Brand, Resin Reaction
The 500 and 1000 mL kettles have interchangeable covers with four openings to accommodate
24/40 joints. Kettles of 2000, 3000, and 4000 mL capacity have interchangeable covers and have
openings to accommodate three 24/40 joints and one 34/45 joint. Interchangeable joints
allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are
finely ground for a tight seal. For use with heating mantle only.
Cat. No.
Description
Capacity
(mL)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
CLS6947500
CLS69471L
CLS69472L
CLS69474L
CLS6947500BO
CLS69472LBO
CLS69472LCO*
Complete
Complete
Complete
Complete
Bottom only
Bottom only
Cover only
500
1000
2000
4000
500
2000
95 x 207
108 x 220
140 x 239
140 x 395
95 x 152
140 x 184
168 x 55
1
1
1
1
1
1
4
4
2
*Fits 2L, 3L, and 4L.

**Fits 500 and 1000 mL.
47
REUSABLE GLASS
C H EMISTRY KITS
6949 CORNING Brand,
24/40 Components
This basic kit is supplied complete with drawer-size polyethylene case in which components are
mounted in foam. The kits versatility enables many standard laboratory operations to be performed,
such as: distillation, reaction with gas evolution, preparation or recovery, simple reflux, reflux with
addition, fractional distillation and vacuum distillation.The case is approximately 130 mm x 256 mm
x 343 mm. For more detail on individual components of the kit and available parts, refer to the
specific catalog numbers.
Cat. No.
Description
CLS6949
CLS4320100
CLS4320250
CLS4320500
CLS7570N24
CLS7715
CLS882124
Complete Kit
Round Bottom Boiling Flask, 100 mL
PYREX Stopper
Thermometer Holder, Rubber
Tube, Adapter Outlet
6949E CORNING Brand,
Qty/Pk
Qty/Cs
2
2
2
1
12
12
12
6
1
1
19/22 Components
Similar to Cat. No. 6949, as many of the same standard laboratory experiments can be performed
with this kit. It includes a distillation column and bleed tube for steam distillation or gas flow
reactions. The components of the kit are held in foam within a polyethylene case. The overall
case size is approximately 130 mm x 256 mm x 343 mm. For more detail on individual components
of the kit and available parts, refer to the specific catalog numbers.
48
Cat. No.
Description
CLS6949
CLS215519
CLS270519
CLS4320B25
CLS4320B50
CLS4320B100
CLS4320B250
CLS4320B500
CLS6413125
CLS6949EBO
CLS6949EIO
CLS757519
CLS7715
CLS781519
CLS882119
CLS894719
CLS900019
CLS905019
Complete Kit
Distilling Column, 190 mm
Condenser, West, 190 mm
Funnel, Separatory, Addition, Pear-Shaped, 125 mL, Teflon Stopcock
Polyethylene Kit Box Only
Foam Insert Only
PYREX Stopper
Thermometer Holder, Rubber
Tube, Bleed
Tube, Adapter, Straight, w/Thermometer Opening
Tube, Connecting, Vacuum
Tube, Connecting, 3-Way
Tube, Connecting, Claisen
Qty/
Pk
Qty/
Cs
1
1
4
1
1
12
1
1
4
1
1
6
1
1
1
6
1
1
REUSABLE GLASS
6949G2 CORNING Brand,
19/22 Components, Two PYREX Stoppers
Provides equipment for most common organic laboratory experiments described under 6949A.
Note in particular the inclusion of a 250 mL flask with side tubulation, which is useful when performing steam distillations or experiments requiring an air bleed. This kit contains a three neck
boiling flask to enable distillation while stirring and adding other compounds. The components of
the kit are held in foam within a polyethylene case. The overall size of the case is approximately
130 mm x 256 mm x 343 mm. For more detail on individual components of the kit and available
parts, refer to the specific Cat. Nos.
Cat. No.
Description
CLS6949G2
Complete Kit
6949M1 PYREX Brand, Deluxe Version,
Qty/Pk
Qty/Cs
7/10-14/10 Components
The deluxe micro-organic kit is supplied with all the necessary components needed to perform
experiments covered in the Mayo, Pike, Butcher text, Microscale Organic Laboratory.* Components
come in 7/10 and 14/10 joint sizes. A selection of conical reaction vials from 0.1 mL to 5.0 mL
capacity is included. All components are mounted in foam within a polyethylene case for easy storage.
Cat. No.
Description
Qty/Pk
Qty/Cs
CLS6949M1
Kit Deluxe
*Published by John F. Wiley.
6949M4 PYREX Brand, Deluxe Version, 14/10

Threaded ComponentsThe deluxe micro-organic kit is supplied with all the necessary components
needed to perform experiments covered in the Mayo, Pike, Butcher text, Microscale Organic
Laboratory.* Components come in 14/10 threaded joint sizes. A selection of conical reaction vials
from 0.1 mL to 5.0 mL capacity is included. The Craig Recrystallization tube has a Teflon plug
which eliminates breakage normally associated with glass plugs. All components are mounted in
foam within a polyethylene case for easy storage.
Cat. No.
Description
CLS6949M4
Kit Deluxe Threaded
Qty/Pk
Qty/Cs
*Published by John F. Wiley.
49
REUSABLE GLASS
PIPETS
7065 PYREX Brand, Reusable Glass, Measuring, Color-Coded, with Colored Markings
These pipets are color-coded by size for easy identification and sorting. Colored graduations are
enameled onto the glass. The top end of 5 to 25 mL sizes is constricted (Mohr type). They are
calibrated to deliver their total capacity without blow-out.
Cat. No.
CLS70651
CLS70651C
CLS70652
CLS70655
CLS706510
CLS706525
Capacity
(mL)
Tol.
( mL)
Grad.
Interval (mL)
Approx. O.D. x
Length (mm)
Qty/Pk
Qty/Cs
1.0
1.0
2.0
5.0
10.0
25.0
.02
.02
.02
.04
.06
.1
.1
.01
.1
.1
.1
.1
7 x 325
7 x 350
7 x 350
8 x 350
10 x 380
14 x 440
6
6
6
6
6
12
12
12
12
12
12
Do not pipet by mouth. We suggest using a mechanical pipetting device.

7070 PYREX Brand, Reusable Glass, Serialized/Certified, Class A, Colored Markings,

Measuring, Color-Coded
Calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-1293. Each pipet
is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to
NIST standards. Calibrated to deliver their total capacity without blow-out. Color-coded by size
for easy identification. Colored graduations are enameled onto the glass. The top end of 5 to 25 mL
sizes is constricted (Mohr type).
Cat. No.
CLS70701
CLS70702
CLS70705
CLS707010
CLS707025
Capacity
Grad.
(mL) Interval (mL)
1.0
2.0
5.0
10.0
25.0
.1
.1
.1
.1
.1
Tol.
( mL)
Approx. O.D. x
Length (mm)
Qty/Pk
Qty/Cs
.01
.01
.02
.03
.05
7 x 325
7 x 350
8 x 350
10 x 380
14 x 440
2
2
2
2
2
6
6
6
6
6
7085 PYREX Brand, Reusable Glass Serological, Color-Coded, Colored Markings

These pipets are color coded by size for easy identification and sorting. Colored graduations are
enameled onto the glass. These to deliver pipets must be blown out to obtain total rated capacity.
Cat. No.
CLS70851X
CLS70852X
CLS70851
CLS70851C
CLS70852
CLS70852C
CLS70855
CLS708510
Capacity Tolerance
(mL)
( mL)
0.1
0.2
1.0
1.0
2.0
2.0
5.0
10.0
.005
.008
.02
.02
.02
.02
.04
.06
Grad.
Interval (mL)
Approx. O.D. x
Length (mm)
Qty/Pk
Qty/Cs
.01
.01
.1
.01
.1
.01
.1
.1
7 x 300
7 x 300
7 x 350
7 x 350
7 x 350
7 x 350
8 x 350
10 x 350
6
6
6
6
6
6
6
12
12
12
12
12
12
12
12

50
REUSABLE GLASS
7086 PYREX Brand, Reusable Glass Serological, Color-Coded, Color Markings

These pipets are designed for cotton plugging. The uniform top-end openings permit performing
of plugs and allow precise control of liquid column. Color-coded by size for easy identification and
sorting. Colored graduations are enameled onto the glass. The two rings indicate the pipet is calibrated To Deliver its total capacity when the last drop is blown out. Reference: ASTM E-1044.
Cat. No.
Capacity
(mL)
Tol.
( mL)
Grad.
Interval (mL)
Approx. O.D.
x Height mm
Qty/Pk
Qty/Cs
1
5
10
0.02
0.04
0.06
0.1
0.1
0.1
7 x 350
8 x 350
10 x 350
6
6
6
12
12
12
CLS70861
CLS70865
CLS708610
7087 PYREX Brand, Reusable Glass Serological, Large Tip Opening, Color-Coded,
Colored Markings
Made with a large tip opening to allow more rapid intake and delivery of suspensions and viscous
materials. Color coded by size for easy identification and sorting. Colored graduations are enameled
onto the glass. The two narrow bands or one wide band at the top indicate the pipet is calibrated
to deliver its total capacity when the last drop is blown out.
Cat. No.
Capacity
Grad.
(mL)
Range (mL)
CLS70871
CLS70872
CLS70875
CLS708710
CLS708725
1.0
2.0
5.0
10.0
25.0
Tolerance
Grad.
Approx. O.D. x
( mL)
Interval (mL) Length (mm)
0-0.9
0-1.9
0-4.9
0-9.5
0-24
.05
.05
.1
.1
.2
.1
.1
.1
.1
.1
7 x 350
7 x 350
8 x 350
10 x 350
14 x 440
Qty/
Pk
Qty/
Cs
6
6
6
12
12
12
12
12
7095B CORNING Brand, Bulk Pack, Non-Sterile, Non-Plugged

CORNING disposable glass Pasteur pipets are available in convenient Packages. One-time use
eliminates the danger of cross-contamination of valuable specimens or laboratory reagents. These
pipets feature a constriction one inch below the top to facilitate plugging. They are ideal for rapid
non-volumetric transfer work in bacteriology, immunology, hematology and serology studies, as
well as blood bank and clinical chemistry procedures.
Cat. No.
CLS7095B5X
CLS7095B9
CLS7095BNMR
51
Size (Inches)
Qty/Pk
Qty/Cs
5.75
9
Long Tip
5
5
1000
1000
100
REUSABLE GLASS
7100 PYREX Brand, Reusable Glass Volumetric, Class A, Color-Coded, Colored

Markings
These pipets are manufactured to Class A capacity tolerances as indicated by ASTM E-969.The
rugged construction, Colored enamel graduations and markings provide a pipet which will give
good life and service. Sizes 1 mL through 25 mL are color-coded.
Cat. No.
CLS71001
CLS71002
CLS71003
CLS71004
CLS71005
CLS710010
CLS710015
CLS710020
CLS710025
CLS710050*
CLS7100100
Color Code
Capacity (mL)
Tolerance
( mL)
Approx.
Length (mm)
Qty/Cs
Blue
Orange
Black
Red
White
Red
Green
Yellow
Blue
1.0
2.0
3.0
4.0
5.0
10.0
15.0
20.0
25.0
50.0
100.0
.006
.006
.01
.01
.01
.02
.03
.03
.03
.05
.08
313
333
356
370
392
429
400
460
460
516
565
12
12
12
12
12
12
12
12
12
12
12
*New design allows more complete and efficient drainage. Do not pipet by mouth. We suggest using a mechanical pipetting device.
7101 PYREX Brand, Serialized/Certified, Class A, Volumetric, Color-Coded, Colored

Graduations
Calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-969. Each pipet
is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to
NIST standards. Sizes 1mL through 25mL are color-coded with colored graduations enameled
onto the glass.
Cat. No.
CLS71011
CLS71012
CLS71013
CLS71015
CLS710110
CLS710120
CLS710125
CLS710150
CLS7101100
Color
Code
Capacity
(mL)
Tol.
(mL)
Approx.
Length (mm)
Qty/Pk
Qty/Cs
Blue
Orange
Black
White
Red
Yellow
Blue
1.0
2.0
3.0
5.0
10.0
20.0
25.0
50.0
100.0
.006
.006
.01
.01
.02
.03
.03
.05
.08
313
333
356
392
429
516
521
516
565
2
2
2
2
2
2
2
2
2
6
6
6
6
6
6
6
6
6
52
REUSABLE GLASS
7102 PYREX Brand, Reusable Glass Volumetric, Color-Coded

These pipets were designed primarily for schools and laboratories where the Class A tolerance of
Cat. No. 7100 is not required. They are constructed to the same wall thickness and length as our
Cat. No. 7100, but have larger tip openings for faster delivery. It is primarily due to this faster
delivery that accuracy tolerances are twice those specified for Class A volumetric ware. Sizes 0.5 mL
through 25mL are color-coded.
Cat. No.
CLS71021X
CLS71021
CLS71022
CLS71025
CLS710210
CLS710220
CLS710225
CLS7102100
Color
Code
Capacity
(mL)
Tol.
(mL)
Approx.
Length (mm)
Qty/Pk
Qty/Cs
Black (2)
Blue
Orange
White
Red
Yellow
Blue
.5
1.0
2.0
5.0
10.0
20.0
25.0
100.0
.012
.012
.012
.02
.04
.06
.06
.16
318
313
333
392
429
460
460
565
6
6
6
6
6
6
6
6
12
12
12
12
12
12
12
12

*New design allows more complete and efficient drainage.
7103 PYREX Brand, Reusable Glass, Volumetric, To Contain, To Deliver, Class A

These precision pipets are manufactured and calibrated to contain (bottom line) and To
Deliver (top line) to specifications for Class A volumetric ware.
Cat. No.
CLS71031
CLS71032
CLS71033
CLS71034
CLS71035
CLS71036
CLS71037
CLS71038
CLS71039
CLS710310
CLS710315
CLS710320
CLS710325
Capacity
(mL)
Tol.
( mL)
Approx.
Length (mm)
Color
Code
Qty/Cs
1
2
3
4
5
6
7
8
9
10
15
20
25
0.006
0.006
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
313
333
356
370
392
420
420
425
425
429
445
516
521
Blue
Orange
Black
Red
White
Orange
Green
Blue
Black
Red
Green
Yellow
Blue
6
6
6
6
6
6
6
6
6
6
6
6
6
7105 PYREX Brand, Reusable Glass Blood Chemistry (Ostwald-Folin), Class A,

Color-Coded, Colored Markings
These precision pipets meet or exceed specifications for Class A volumetric ware as indicated by
ASTM E-969. Shorter, and more compact than our Class A No. 7100 types, these pipets originally
were suggested by Folin for use in determining total nitrogen, urea and ammonia in urine, and
they are generally used for blood serum tests. They are calibrated to deliver by blowing out the
last drop. Colored graduations are enameled onto the glass.
Cat. No.
CLS71052
53
Color
Code
Capacity
(mL)
Tol.
( mL)
Approx.
Length (mm)
Qty/Pk
Qty/Cs
Orange
2.0
.006
275
12
REUSABLE GLASS
P L AT E S
7220 PYREX Brand, Nine Depression Spot Plates
These pressed plates have concave depressions which are useful for soil chemistry, color reactions,
microchemical applications and microscopic observations. Nine concave depressions 22 mm O.D.
x 7 mm deep.
Cat. No.
Approx. Size (mm)
CLS72208
Qty/Pk
Qty/Cs
18
85 x 100
STO PCO C K
7470 PYREX Brand Body, Rotaflo PTFE High Performance Plug, Two-Way, In-Line,
Plain Bore
Cat. No.
Bore (mm)
Approx.
Length (mm)
Approx. O.D.
of Sidearms (mm)
Qty/Cs
0-3
210
CLS74703
7473 PYREX Brand Body, Rotaflo PTFE High Performance Plug, Two-Way,
90 Angle, Plain Bore
Cat. No.
CLS74736
Bore
(mm)
Approx.
Height (mm)
Approx. Sidearm
Length (mm)
Approx. O.D.
of Sidearms (mm)
Qty/Cs
0-6
160
102
10
7681 PYREX Brand, Plug Assembly, Straight Bore,

Cat. No.
Teflon
Approx. Plug Bore (mm)
O-Ring Size
Qty/Cs
2
4
6
A
B
B
1
1
1
CLS76812
CLS76814
CLS76816
STO P P E R S, CA PS, A N D C LO S U R E S
7575 PYREX Brand, Combination Reagent Bottle/Ground Joint, Hollow
Cat. No.
CLS757514*
CLS757519**
CLS757524
Ground
Joint
Bottle Size
14
19
24
Height Above
Ground Joint (mm)
Qty/Cs
28
32
41
6
6
6
14/20
19/22
24/30
*The CLS757514 is a replacement part for organic chemistry kit Cat. No. CLS6949K.
**The CLS757519 is a replacement part for organic chemistry kits Cat. Nos. CLS6949E, CLS6949F, and CLS6949G2.
7570N PYREX Brand, Ground Joint

Hollow, full length stopper closed at the bottom. Interchangeable with standard taper joints.
Cat. No.
CLS7570N24
54
Ground
Joint Size
Height Above
Ground Joint (mm)
Qty/Pk
Qty/Cs
24/40
40
REUSABLE GLASS
7624 PYREX Brand, HDPE Polyethylene, Improved Form

These blue and white stoppers are made with closed bottoms, of linear high-density polyethylene
to conform to stopper dimensions. The three unit rings on the base provide an efficient seal.
The improved design fully protects the neck in the event of accidental tipping.These stoppers may
be used in place of the conventional flask stoppers.
Cat. No.
Stopper No.
CLS76248
CLS76249
CLS762413
CLS762416
CLS762419
CLS762422
CLS762427
CLS762438
Qty/Cs
8
9
13
16
19
22
27
38
6
6
6
6
6
6
6
6
7630 PYREX Brand, PTFE, , Key-Hole, Color-Coded

These stoppers are made to conform to stopper dimensions. The color-coded keys make sorting
and selecting the correct size much faster and easier. These stoppers may be used in place of the
conventional flask stopper.
Cat. No.
CLS76308
CLS76309
CLS763013
CLS763016
CLS763019
CLS763022
Stopper No.
8
9
13
16
19
22
Color
Qty/Pk
Qty/Cs
Gray
Black
Orange
Blue
Green
Yellow
2
2
2
2
2
2
6
6
6
6
6
6
7650 PYREX Brand, , Hollow

The hollow PYREX stopper is light in weight, yet very strong to reduce chipping and breakage,
thus minimizing replacement costs. A barrel-shaped head means it is easy to clean and even easier
to rotate in or out. Grooves in the sides help prevent slippage. The flat top allows the stopper to
stand on its head, which frees the users hand and minimizes potential contamination. This PYREX
stopper is interchangeable with other common flask stoppers and fits all standard labware of
comparable size.
Cat. No.
CLS76508
CLS76509
CLS765016
CLS765019
CLS765022
Stopper No.
Approx. Length of
Ground Zone (mm)
Height Above
Ground Joint (mm)
Qty/Cs
8
9
16
19
22
10
14
15
17
20.5
25
25
31
32
38
6
6
6
6
6
7660 PYREX Brand, Solid, Pennyhead

Pennyhead
Cat. No.
CLS76609
CLS766013
CLS766016
CLS766019
CLS766022
CLS766027
55
stoppers are generally used in flasks and separatory funnels.

Stopper No.
Approx. Length of
Ground Zone (mm)
Height Above
Ground Joint (mm)
Qty/Cs
9
13
16
19
22
27
14
14
15
17
20.5
21.5
20
25
25
27
30
37
6
6
6
6
6
6
REUSABLE GLASS
7666 PYREX Brand, LDPE Polyethylene, Snap Cap

These blue caps provide an economical closure for certain volumetric flasks. Refer to volumetric
flask listings to determine sizes and whether the flask is designed to take such a cap.
Cat. No.
Snap Cap No.
Qty/Cs
25
50
100
250
500
1000
2000
6
6
6
6
6
6
6
CLS766625
CLS766650
CLS7666100
CLS7666250
CLS7666500
CLS76661L
CLS76662L
9998 CORNING Brand, Phenolic, Teflon Liner

This cap is fabricated of a resin specially formulated to resist the effects of temperature and steam
in autoclaving. Caps are provided with a glued-in rubber liner over which is firmly bonded a
Teflon interface which provides a highly inert sealing face.
Cat. No.
G.P.I. Thread Finish
Approx. Outside
Height (mm)
Qty/Cs
24-410
13-415
15-415
18-415
18.5
13.5
16.0
17.5
144
288
288
192
CLS9998241
CLS999813
CLS999815
CLS999818
9999 CORNING Brand, Phenolic, Rubber Liner

These caps are fabricated of a resin specially formulated to resist the effects of temperature and
steam in autoclaving. Caps have a glued-in, white rubber liner.
Cat. No.
CLS999924
CLS999928
CLS999940
CLS9999241
CLS9999152
CLS9999381M
G.P.I.
Thread Finish
Approx. Outside
Height (mm)
Qty/Pk
Qty/Cs
24-400
28-400
40-400
24-410
15-415
38-430 Deeper Threads
12.5
12.5
12.5
18.5
16.0
27.0
36
12
12
144
72
144
288
72
THERMOMETER
7715 CORNING Brand, Rubber
Cat. No.
Approx. O.D. x I.D. (mm)
Qty/Cs
CLS7715
17 x 13
TISSUE GRINDER
7722 PYREX Brand, Tissue Grinder, Dounce, 2 Glass Pestles
Supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage
to cell nuclei. Use the large clearance pestle for initial reduction of soft tissue. Complete the
homogenization with the small clearance pestle. Particularly useful in enzyme studies where heat
build-up must be avoided.
Cat. No.
CLS77227
56
Description
Approx.
Capacity (mL)
Body O.D. x
Height (mm)
Qty/Cs
Tissue Grinder
15 x 117
REUSABLE GLASS
TUBES
6980 PYREX Brand, NMR Tubes, 5 mm Diameter
Precision NMR tubes made from quality PYREX borosilicate glass for compatibility with ground
joints, valves, and vacuum racks. Made using precision bore tubing manufacturing techniques
proven most reliable in NMR applications. Complete selection of tubes for all types of NMR
spectrometers, from 60 to 600 MHz. All 5 mm NMR sample tubes have O.D. = 4.97 +0.000-0.013
mm I.D. of all except basic tubes are 4.20 +0.013-0.000 mm.
Cat. No.
CLS6980A7
CLS6980B7
CLS6980B8
CLS6980D8
CLS6980F7
Description
Length For NMR

(Inches)
MHz
Superior Plus
Superior
Superior
Deluxe
Regular
7
7
8
8
7
400-750
300-500
300-500
200-400
60-100
Concentricity
Camber
TIR* (Inches) TIR* (Inches) Qty/Pk Qty/Cs
0.0005
0.0005
0.0005
0.002
0.002
0.00025
0.0005
0.0006
0.0006
0.0020
5
5
5
5
10
*TIR = Total Indicator Reading
7732 PYREX Brand, Bomb, Gum Stability

For the determination of gum stability of gasoline. The cover prevents condensed vapors in bomb
stem from contaminating the sample, but does not interfere with free flow of oxygen. Made in
accordance with ASTM D-525.
Cat. No.
Description
Qty/Cs
CLS773201
CLS7732CO
Complete
Cover Only
50 x 105
1
1
7735 PYREX Brand, Ramsbottom, Bulb, Carbon Residue

Used in determining carbon residue in petroleum products.Reference: ASTM D-524.
Cat. No.
Approx. O.D. x Body Length (mm)
Stem O.D. (mm)
Qty/Pk
Qty/Cs
24 x 57
12
24
CLS773524
7900 PYREX Brand, Digestion, Folin-Wu

Fabricated from specially selected tubing for product durability. Engraved white-filled graduations
at 25 and 50 mL.
Cat. No.
CLS790025
Capacity (mL)
Tol.( mL)
Qty/Cs
50.0
0.4
25 x 200
7952 PYREX Brand, Lifetime Red, Taylor, Universal, Graduated

This tube is for general hospital laboratory work. It was designed by Dr. F.N.L. Taylor, Boston
City Hospital, for determinations involving multiple calibrations and for carrying out digestions.
Graduated at 12.5, 25, 35, and 50 mL, and supplied with a durable, white enamel marking spot.
Cat. No.
CLS795225
57
Capacity (mL)
Tol. ( mL)
Qty/Cs
50.0
0.4
25 x 200
REUSABLE GLASS
7995 PYREX Brand, Hybridization, Screw Cap, Graduated

35mm I.D. tubes available in three standard lengths for use in hybridization incubators with
rotators. A more convenient method requiring smaller probe solution volumes. Comes with
Corning standard GL 45 orange plug-seal cap incorporating a silicone O-ring to ensure a leakresistant seal. The optional Corning vented membrane cap is available for low temperature assays.
Description
Approx. I.D.
x Length (mm)
Qty/Cs
Tube, Cap,O-Ring, 150 mm L

Tube, Cap, O-Ring, 300 mm L
O-Ring, Silicone for 7995 Tube
35 x 150
35 x 300
2
2
20
Cat. No.
CLS7995150
CLS7995300
CLS139545LTC
For replacement caps or vented membrane cap, see Cat. No. CLS1395.
8060 PYREX Brand, Centrifuge, Conical, Beaded Rim

Uniform glass distribution in the wall, taper and bottom provides improved mechanical strength,
prevents the formation of failure-causing stress regions during centrifuging and insures the highest
degree of accuracy.
Cat. No.
CLS80605
CLS806015
Capacity
(mL)
Approx.
O.D. x Length (mm)
Qty/Pk
Qty/Cs
5.0
15.0
13 x 101
17 x 120
2
2
12
12
8080 PYREX Brand, Centrifuge, Conical, Beaded Rim, Graduated

These tubes have white enamel graduations. The 10 and 15 mL sizes are graduated upward from
tip in 0.1 mL divisions. The 50 mL size is graduated upward from tip to 10 mL in 0.5 mL divisions,
and from 10 to 50 mL in 1 mL divisions.
Cat. No.
CLS808015
CLS808050
Capacity
(mL)
Approx.
O.D. x Length (mm)
Qty/Pk
Qty/Cs
15.0
50.0
17 x 119
28 x 135
12
12
8061 PYREX Brand, Centrifuge, Conical, Pennyhead Stopper

Uniform glass distribution in the wall, taper and bottom provides improved mechanical strength
and prevents the formation of failure-causing stress during centrifuging and insures the highest
degree of accuracy. This microcentrifuge tube conforms to ASTM E-237. Tubes are fitted with a
No. 9 Pennyhead stopper.
Cat. No.
CLS80613
Capacity
(mL)
Approx. O.D. x
Length (mm)
Stopper
No.
Qty/Cs
11 x 90
For replacement stoppers, see Cat. No. CLS7660.
8082 PYREX Brand, Centrifuge, Conical, Screw Cap, Graduated

These tubes have white enamel graduations. The 15 mL size is graduated upward from the tip in
0.1 mL divisions. the 50 mL size is graduated upward from tip to 10 mL in 0.5 mL divisions, and
from 10 to 50 mL in 1 mL divisions. The phenolic screw cap is fabricated of a resin which is specially
formulated to resist the effects of temperature and steam. Caps have a glued-in, white rubber liner.
Cat. No.
CLS808215
CLS808250
Capacity
(mL)
Approx.
O.D. x
Length (mm)
G.P.I.
Thread
Finish
Qty/Cs
15.0
50.0
17 x 134
28 x 150
15-415
24-410
12
12
For phenolic caps, see Cat. No. CLS9999.
58
REUSABLE GLASS
8084 PYREX Brand, Centrifuge, Conical, Pennyhead
Stopper, Graduated
These tubes have white enamel graduations. The 5 and 15 mL sizes are graduated upward from
the tip in 0.1 mL divisions. The 50 mL size is graduated upward from tip to 10 mL in 0.5 mL
divisions, and from 10 to 50 in 1 mL divisions. The pennyhead stopper is solid.
Cat. No.
CLS80845
CLS808415
CLS808450
Capacity
(mL)
Stopper
No.
Approx. O.D. x
Length (mm)
(Exclusive of Stopper)
Qty/Pk
Qty/Cs
5.0
15.0
50.0
9
13
16
13 x 120
17 x 139
28 x 151
12
12
12
8101 PYREX Brand, Centrifuge, Conical, Beaded Rim, Colored Graduations

These tubes have sharp, colored enamel graduations and markings. The tubes are the same size
and shape as our Cat. Nos. 8060 and 8080. They have precision formed tips and uniform walls
throughout for a high degree of accuracy and mechanical strength.
Cat. No.
Capacity
(mL)
Approx. O.D. x
Length (mm)
Qty/Cs
15.0
50.0
17 x 120
28 x 135
12
1
CLS810115
CLS810150
8120 PYREX Brand, Centrifuge, Conical, Heavy Duty, Beaded Rim

Made to the same O.D. and length specifications as No. 8060, but of increased wall thickness
for greater mechanical strength. In order to conform with outside diameter and overall length
limitations imposed by shields, it has been necessary to reduce the capacity of all heavy duty tubes.
Cat. No.
Capacity
(mL)
Approx.
O.D. x Length (mm)
Qty/Cs
12.0
17 x 120
12
CLS812012
8140 PYREX Brand, Centrifuge, Conical, Heavy Duty, Beaded Rim, Graduated
Of heavy wall construction, for greater mechanical strength, with durable, white enamel graduations.
The 12 mL size is graduated upward from tip in 0.1 mL divisions. The 40 mL size is graduated in
0.5 mL divisions to 10 mL, and from 10 to 40 mL in 1 mL divisions.
Cat. No.
Capacity
(mL)
Approx. O.D. x
Length (mm)
Qty/Pk
Qty/Cs
12.0
40.0
17 x 120
28 x 135
12
12
CLS814012
CLS814040
8142 PYREX Brand, Centrifuge, Conical, Heavy Duty, Screw Cap, Graduated
Constructed of heavy wall glass for greater mechanical strength. Graduations are with durable
white enamel. The 10 mL size is graduated upward from tip in 0.1 mL divisions. The 40 mL size
is graduated in 0.5 mL divisions to 10 mL, and from 10 to 40 in 1 mL divisions. Tubes are fitted
with a phenolic screw cap.
Cat. No.
CLS814210
CLS814240
Capacity
(mL)
Approx. O.D.
x Length (mm)
GPI Thread
Finish
Qty/Cs
10
40
17 x 118
28 x 147
15-415
24-400
1
1
For phenolic cap, see Cat. No. CLS9999.
59
REUSABLE GLASS
8160 PYREX Brand, Centrifuge, Oil, Graduted

In accordance with standard methods of testing for water and sediment in petroleum products.
White graduations upward to 0.5 mL in divisions of 0.05 mL; from 0.5 mL to 2 mL in divisions
of 0.1 mL; from 2 mL to 3 mL in divisions of 0.2 mL; from 3 mL to 5 mL in divisions of 0.5 mL;
from 5 mL to 10 mL in divisions of 1 mL; from 10 mL to 25 mL in divisions of 5 mL and at 50,
75, and 100 mL.
Cat. No.
Capacity (mL)
Qty/Cs
100.0
38 x 200
12
CLS8160100
Reference: ASTM D-96, D-91, D-893 and D-1796.
8180 PYREX Brand, Lifetime Red, Centrifuge, Oil, Graduated

White graduations against a permanent red panel. Graduated upward to 0.5mL in divisions of
0.05 mL; from 0.5 mL to 2 mL in divisions of 0.1 mL; from 2 mL to 3 mL in divisions of 0.2 mL;
from 3 mL to 5 mL in divisions of 0.5 mL; from 5 mL to 10 mL in divisions of 1 mL; from 10 mL
to 25 mL in divisions of 5mL and at 50, 75, and 100 mL.
Cat. No.
Capacity (mL)
Qty/Cs
100.0
38 x 200
12
CLS8180100
Reference: ASTM D-96, D-91, D-893, and D-1796.
8190 PYREX Brand, Centrifuge, Oil, Graduated

With white graduations as listed. Tube is calibrated to contain and the subdivisions and capacity
tolerances are indicated.
Capacity
Cat. No.
CLS8190100
(mL)
Range
(mL)
Grad.
Interval
(mL)
100.0
0.0-0.5
0.05
From-To
Tolerance
( mL)
Approx.
O.D. x
Length (mm)
Qty/
Pk
Qty/
Cs
0.0-0.1
0.02
45 x 165
12
Reference: ASTM D-96.
8200 PYREX Brand, Centrifuge, Oil, Pear-Shaped, Graduated

For determination of water and sediment in petroleum products. Fabricated from mold-blown
blanks to insure uniform shape and greater mechanical strength. The stem has white graduations
from 0 to 1.5 mL in 0.1 mL divisions. The body is graduated from 1.5 mL to 5 mL in 0.5mL
divisions; from 5 mL to 10 mL in 1 mL divisions; and at 15, 20, 25, 50, and 100 mL.
Cat. No.
CLS8200100
Capacity
(mL)
Qty/Cs
100.0
58 x 158
12
Reference: ASTM D-96 and D-1966.
8220 PYREX Brand, Centrifuge, Goetz, Pear-Shaped, Graduated

The lower stem is graduated upward to 1 mL in 0.05 mL divisions. The body is graduated from
1 mL to 5 mL in 1 mL divisions; from 5 mL to 50 mL in 5 mL divisions; and from 50 mL to
100 mL in 10 mL divisions.
Cat. No.
CLS8220100
60
Capacity
(mL)
Qty/Cs
100.0
58 x 159
12
REUSABLE GLASS
8240 PYREX Brand, Centrifuge, Round Bottom, Pourout

Round bottom tube with pourout spout for easy decanting.
Cat. No.
CLS824050
CLS8240100
Capacity (mL)
Qty/Pk
Qty/Cs
50.0
100.0
29 x 116
33 x 158
12
12
8300 PYREX Brand, Centrifuge, Short Conical Bottom, Pourout, Graduated

The durable, white enamel scale is graduated from 0 to 10 mL in 0.5 mL divisions, and from 10 mL
to 50 mL in 1 mL divisions.
Cat. No.
Capacity (mL)
Approx.
O.D. x Length (mm)
Qty/Cs
50.0
29 x 118
12
CLS830050
8320 PYREX Brand, Centrifuge, Heavy Duty, Short Conical Bottom, Pourout
A heavy-walled, short conical bottom tube. With pourout spout for easy decanting.
Cat. No.
Capacity (mL)
Approx.
O.D. x Length (mm)
Qty/Cs
40.0
29 x 116
12
CLS832040
8340 PYREX Brand, Centrifuge, Heavy Duty, Short Conical Bottom, Pourout,
Graduated
Heavy wall construction. Graduated to 10 mL in 0.5 mL divisions, and from 10 to 40 mL in 1 mL
divisions. Graduations are in durable white enamel.
Cat. No.
CLS834040
Capacity
(mL)
Approx.
O.D. x Length (mm)
Qty/Pk
Qty/Cs
40.0
29 x 118
12
8422 PYREX Brand, Centrifuge, Heavy Duty, Round Bottom, Screw Cap
These tubes are useful for the handling of sputum specimens. Digestion, shaking, neutralizing and
centrifuging can be performed in one container. They are also useful for other clinical and microbiological tests. Screw caps resist the effects of temperature and steam. The 50 mL tube has a
black phenolic cap with a glued-in, white rubber liner. The 100mL tube has a white polypropylene
cap with a Teflon liner.
Cat. No.
CLS842250
CLS8422100
Approx.
Capacity (mL)
Approx. O.D. x
Length (mm)
G.P.I.
Thread Finish
Qty/Cs
50.0
100.0
29 x 122
43 x 139
24-410
38-400
12
1
For phenolic cap for 50 mL tube, see Cat. No. CLS9999.
9480 PYREX Brand, Filter

The constricted lower end is 8 mm O.D. by 75 mm. long on all sizes. For use with PYREX brand
crucibles with fritted discs listed under Cat. Nos. 32940 and 32960. Also for use with Gooch crucibles or directly with porcelain plates.
Cat. No.
CLS948036
CLS948042
61
Approx. I.D. x Length (mm)
Qty/Cs
36 x 160
44 x 160
1
1
REUSABLE GLASS
9540 PYREX Brand, Thiele, Melting Point

For melting point determination tests.
Cat. No.
Qty/Pk
Qty/Cs
25 x 150
12
CLS954025
9800 PYREX Brand, Test, Beaded Rim

These tubes are made from special tubing to give the optimum wall thickness. They are well annealed,
resistant to heat and chemically stable. Rims are fire-polished. The 25 mm tube does not have a
marking spot.
Cat. No.
CLS980010
CLS980012
CLS980013
CLS980015
CLS980016
CLS980018
CLS980020
CLS980025
CLS980025X
Capacity
(mL)
Approx. O.D. x
Length (mm)
Qty/Pk
Qty/Cs
3
5
9
14
20
27
34
55
70
10 x 75
12 x 75
13 x 100
15 x 125
16 x 150
18 x 150
20 x 150
25 x 150
25 x 200
72
72
72
72
72
72
72
72
48
720
720
720
720
576
576
576
288
192
9820 PYREX Brand, Culture, Rimless

Rimless for greater convenience in plugging and rack storage. Walls and bottoms are of uniform
thickness. Ends are fire-polished. The 6, 22, and 25 mm O.D. tubes do not have marking spots.
Cat. No.
CLS98206
CLS982010
CLS982012*
CLS982013**
CLS982016
CLS982016X
CLS982016XX
CLS982018
CLS982020
CLS982022
CLS982025
CLS982025X
Capacity (mL)
Approx. O.D. x
Length (mm)
Qty/Pk
Qty/Cs
0.5
3.0
5.0
9.0
11.0
15.0
20.0
27.0
34.0
50.0
55.0
70.0
6 x 50
10 x 75
12 x 75
13 x 100
16 x 100
16 x 125
16 x 150
18 x 150
20 x 150
22 x 175
25 x 150
25 x 200
72
72
72
72
72
72
72
72
72
72
72
48
720
720
720
720
576
576
576
576
576
432
288
192
*Kahn tubes.
** Wasserman tube.
62
REUSABLE GLASS
9825 PYREX Brand, Culture, Screw Cap

Furnished with deep-form phenolic caps to facilitate handling and sealing after autoclaving.
Caps are fabricated from a special formula resistant to the effects of temperature and steam in
autoclaving. Caps are provided with a glued-in, white rubber liner. The white enamel marking
spot gives an excellent surface for pencil notations. Pencil marks are easily erased.
Cat. No.
CLS982513
CLS982516
CLS982516X
CLS982516XX
CLS982520
CLS982520X
CLS982525
CLS982525X
CLS982538
Approx.
Capacity (mL)
Approx. O.D. x
Length (mm)
G.P.I.
Thread Finish
Qty/Pk
Qty/Cs
9.0
11.0
15.0
20.0
25.0
34.0
55.0
70.0
170.0
13 x 100
16 x 100
16x125
16 x 150
20 x 125
20 x 150
25 x 150
25 x 200
38 x 200
13-415
15-415
15-415
15-415
18-415
18-415
24-410
24-410
38-430M
144
144
144
144
96
96
48
48
12
288
288
288
288
192
192
144
144
48
69825 PYREXPLUS Brand, Culture, Screw Cap, Protective Coating*

Tube features a protective polymer coating for longer product life and safety. Protective coating
helps prevent glass from shattering and reduces spills. Autoclavable (121C) and resistant to thermal
shock. Furnished with deep-form phenolic caps to facilitate handling and sealing. Caps are resistant
to autoclaving and feature glued-in, white rubber liners.
Cat. No.
CLS6982513
CLS6982516X
CLS6982520X
CLS6982525
Approx.
Capacity (mL)
Approx. O.D. x
Length (mm)
G.P.I.
Thread Finish
Qty/Pk
Qty/Cs
9.0
15.0
34.0
55.0
13 x 100
16 x 125
20 x 150
25 x 150
13-415
15-415
18-415
24-410
72
72
32
24
144
144
96
48
For phenolic cap only, see Cat. No. CLS9999.

*Covered by U.S. Patent #4940613
9826 PYREX Brand, Culture, Screw Cap with Teflon Liner

Similar to No. 9825, but phenolic cap has a PTFE interface firmly bonded to the glued-in rubber
liner, providing a sure and highly inert sealing face.
Cat. No.
CLS982613
CLS982616
CLS982616X
CLS982616X X
CLS982620
CLS982620X
CLS982625
CLS982625X
Approx. O.D. x
Length (mm)
Approx.
Capacity (mL)
G.P.I.
Thread Finish
Qty/Pk
Qty/Cs
13 x 100
16 x 100
16 x 125
16 x 150
20 x 125
20 x 150
25 x 150
25 x 200
9.0
11.0
15.0
20.0
25.0
34.0
55.0
70.0
13-415
15-415
15-415
15-415
18-415
18-415
24-410
24-410
144
144
144
144
96
96
48
48
288
288
288
288
192
192
144
144
63
REUSABLE GLASS
9850 PYREX Brand, Culture, Flat Bottom, Rimless

These new culture tubes with flat bottoms are ideal for plant tissue culture and general culture
work. The flat bottom facilitates use with agar slants. Walls and bottoms are of uniform thickness.
The tubes are rimless for greater convenience in plugging and rack storage. Optional polypropylene two position closure. Position closure open for gas exchange or closed for humidified environment. Internal drip ring minimizes contamination.
Cat. No.
CLS2679638
CLS2679738
CLS985025
CLS985025X
CLS985025XX
CLS985040
CLS2679425
CLS2679525
Description
Approx.
Capacity (mL)
Approx. Diam. x
Length (mm)
Qty/Pk
Qty/Cs
Closure*
Closure
Tube
Tube
Tube
Tube
Closure*
Closure
39.0
47.0
59.0
130.0
38
38
25 x 100
25 x 120
25 x 150
40 x 130
25
25
50
50
50
50
50
50
36
36
100
100
100
100
100
100
72
72
*Orange closure.
9860 PYREX Brand, Ignition, Heavy Wall, Rimless

These ignition tubes are made of Code No. 7740 glass and are satisfactory for most applications
encountered in school work where temperatures above 600C are not required. These tubes
perform well when continually used at temperatures up to 500C, or for short periods to 600C.
Cat. No.
Qty/Pk
Qty/Cs
16 x 125
18 x 150
72
72
288
144
CLS986016
CLS986018
99445 PYREX Brand, Culture, Disposable, Rimless, Dispenser Pack and Bulk Pack
These one-use culture tubes are packaged for your convenience in easy-to-open, easy-to-use packs.
The three small sizes come in a dispenser arrangement, and the larger sizes are bulk-packed. Made
of borosilicate glass to reduce pH changes and contaminants potentially leached from soda-lime glass.
Cat. No.
Approx.
Volume (mL)
O.D. x
Length (mm)
Pk/Cs
Qty/Cs
4.0
6.0
10.0
11.0
15.0
19.0
23.0
28.5
36.0
10 x 75
12 x 75
13 x 100
15 x 85
16 x 100
16 x 125
16 x 150
18 x 150
20 x 150
4
4
4
4
4
4
4
2
2
1000
1000
1000
1000
1000
1000
1000
500
500
CLS9944510
CLS9944512
CLS9944513
CLS9944515
CLS9944516
CLS9944516X
CLS9944516XX
CLS9944518
CLS9944520
99447 PYREX Brand, Culture, Disposable, Round Bottom, White Marking Spot,
Screw Cap Style, Bulk Pack
Designed for both tissue culture and general bacteriological work. Tubes are made of borosilicate
glass and are sold without caps.
Cat. No.
Approx.
Volume (mL)
O.D. x
Length (mm)
G.P.I.
Thread Finish
Pk/Cs
Qty/Cs
7.5
15.5
19.0
13 x 100
16 x 125
16 x 150
13-415
15-415
15-415
4
4
4
1000
1000
1000
CLS9944713
CLS9944716
CLS9944716X
For caps, see Cat. No. CLS99999.
64
REUSABLE GLASS
99448 PYREX Brand, Culture, Disposable, Flat Bottom, Screw Cap Style, Bulk Pack
Tube has flat bottom and comes without marking spot. Tubes are made of borosilicate glass and
are sold without caps.
Cat. No.
Approx.
Volume (mL)
O.D. x
Length (mm)
G.P.I.
Thread Finish
Pk/Cs
Qty/Cs
17.0
29.5
16 x 125
19.5 x 145
15-415
18-415
4
2
1000
500
CLS9944816
CLS9944819
99449 PYREX Brand, Culture, Disposable, Round Bottom, Screw Cap Style, Bulk Pack
A round bottom tube without marking spot. Tubes are made of borosilicate glass and are sold
without caps.
Cat. No.
Approx.
Volume (mL)
O.D. x
Length (mm)
G.P.I.
Thread Finish
Pk/Cs
Qty/Cs
7.5
11.5
15.0
19.0
24.0
30.0
13 x 100
16 x 100
16 x 125
16x150
20 x 125
20 x 150
13-415
15-415
15-415
15-415
18-415
18-415
4
4
4
4
2
2
1000
1000
1000
1000
500
500
CLS9944913
CLS9944916
CLS9944916X
CLS9944916X X
CLS9944920
CLS9944920X
99999 CORNING Brand, Phenolic, Disposable, Bulk Pack

Made of a phenolic compound. These caps have a white rubber liner.
Cat. No.
G.P.I. Thread Finish
Outside Height
Qty/Cs
13-415
15-415
18-415
13.5
16.0
17.5
1000
1000
1000
CLS9999913
CLS9999915
CLS9999918
F R I T TE D WA R E
32940 PYREX Brand, Gooch Type, High Form, Fritted Disc
Particularly adapted to analytical work where precipitates are dried to constant weight at 110C.
Also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace.
Crucibles should not be subject to sudden temperature changes. In order to avoid strain, they
should not be removed from the furnace until the temperature has dropped to 250C. For low
form, see Cat. No. 32960.
Cat. No.
CLS3294030C
CLS3294030M
CLS3294050C
CLS3294050M
CLS3294050F
Capacity (mL) and

Porosity
Diam. of
Disc (mm)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
30C
30M
50C
50M
50F
30
30
40
40
40
35 x 60
35 x 60
45 x 60
45 x 60
45 x 60
12
12
9
9
1
For filter tube only, see Cat. No. CLS9480.
65
REUSABLE GLASS
32960 PYREX Brand, Gooch Type, Low Form, Fritted Disc

Particularly adapted to analytical work where precipitates are dried to constant weight at 110C.
Also suitable for higher temperatures, in which case it is advisable to heat in an electric furnace.
Crucibles should not be subjected to sudden temperature changes. In order to avoid strain, they
should not be removed from the furnace until the temperature has dropped to 250C. For high
form, see Cat. No. CLS32940.
Cat. No.
CLS3296015M
CLS3296030C
CLS3296030M
Capacity (mL)
and Porosity
Diam. of
Disc (mm)
Approx. O.D. x
Height (mm)
Qty/Pk
Qty/Cs
15M
30C
30M
20
30
30
30 x 44
41 x 50
41 x 50
1
12
12
For filter tube only, see Cat. No. CLS9480.
33950 PYREX Brand, Fritted Disc

Designed for use in PYREX brand extractors, where it is desirable to weigh the material extracted
or where paper thimbles may be attacked by the chemicals used. For PYREX brand extractors and
extraction apparatus, see Cat. Nos. 3740 through 3880.
Cat. No.
CLS33950SC
CLS33950MEC
CLS33950MC
CLS33950LEC
CLS33950LC
Approx. Body
Diam. (mm)
Approx. Overall
Height (mm)
Qty/Pk
Qty/Cs
25
35
35
45
45
85
90
90
130
130
9
1
6
1
6
39525 PYREX Brand, Gas Dispersion, Fritted Disc

These tubes, with a fritted disc at an angle of 90, are used to disperse or scrub gas in liquids. The
size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer
porosity discs give smaller bubbles; however, greater gas pressure is required. The approximate
overall dimension across the disc and stem is 35 mm for a 20 mm disc and 45 mm for a 30 mm disc.
Cat. No.
Diam. of Disc (mm) and Porosity
Approx. Length (mm)
Qty/Cs
30 C
250
CLS3952530C
39530 PYREX Brand, Gas Dispersion, Vertical Type, Fritted Disc

Tube has a fritted disc at an angle of approximately 15. This permits the small gas bubbles to rise
from the disc surface without excessive formation of large bubbles. Its performance is comparable
to that of a horizontal disc. These tubes can be used in test tubes or flasks since a large opening is
not required.
Cat. No.
CLS3953020C
Diam. of Disc (mm)

and Porosity
Approx.
Length (mm)
Dia. of
Stem (mm)
Qty/Cs
20 C
250
39533 PYREX Brand, Gas Dispersion, Fritted Cylinder

Tube is used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity
of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however
greater gas pressure is required. The 12 mm. O.D. fritted cylinder permits insertion through
small openings.
Cat. No.
CLS3953312C
CLS3953312EC
66
Diam. of Disc (mm)

and Porosity
Approx.
Length (mm)
Dia. of
Stem (mm)
Qty/Cs
12 C
12 EC
250
250
8
8
6
6
Disposable Glass
PIPETS
7077 PYREX Brand, Disposable Glass Serological, Individually Wrapped, Sterile,
Plugged
These pipets, calibrated to deliver with blow-out, offer long, slender, tapered tips to make
pipetting go faster and easier. All pipets have negative graduations and fire-polished tips for
burr-free, even flow rates. Easy-open Steri-View wrappers (one side paper, one side plastic) have
color-coded sizes printed directly on the paper for easy identification by size. Colors conform to
I.S.O. standards. Reference: ASTM E-714.
Cat. No.
CLS70771N
CLS70772N
CLS70775N
CLS707710N
Capacity
(mL)
Negative
Grad. (mL)
Grad.
Interval (mL)
Pieces/Pk
Pk/Cs
Approx.
Qty/Cs
1.0
2.0
5.0
10.0
0.2
0.2
1.0
2.0
.01
.01
.1
.1
200
180
120
100
4
4
6
6
800
720
720
600
7077B PYREX Brand, Disposable Glass Serological, Shorty, Individually Wrapped,

Sterile, Plugged
These shorty pipets, calibrated to deliver with blow-out, are ideal for use in confined areas.
The 5, 10, and 25 mL sizes have tooled tops and the 50 mL has a polypropylene top end. Negative
graduations on each pipet make it applicable for both serological and measuring procedures. I.S.O.
color coding is printed directly on the Steri-View wrapper.
Cat. No.
CLS7077B1
CLS7077B5
CLS7077B10
CLS7077B25
CLS7077B50*
Capacity Neg. Grad.

(mL)
(mL)
1.0
5.0
10.0
25.0
50.0
0.5
3.0
4.0
5.0
3.0
Grad.
Interval (mL)
Total
Length
Pieces/Pk
Pk/Cs
Qty/Cs
.01
.1
.2
.2
.5
215
215
215
300
358
250
200
200
100
25
2
2
2
4
2
500
400
400
400
50

*50 mL size features negative and reverse graduations.
7078 PYREX Brand, Disposable Glass Serological, Multi-Pack, Sterile, Plugged

Designed for the larger-volume user, these pipets are calibrated to deliver with blow-out, and
are packed to permit easy access to several pipets at a time without contaminating the entire case.
Similar to Cat. No. 7077, except multi-packed in plastic bags. New I.S.O. color-coding is printed
directly on the tear strip for easy identification by size. Reference: ASTM E-714.
Cat. No.
CLS70785X
CLS70781N
CLS70781CN
CLS70782N
CLS70785N
CLS707810N
Capacity Negative
Grad.
(mL) Grad. (mL) Interval (mL)
0.5
1.0
1.0
2.0
5.0
10.0
0.2
0.2
0.2
0.2
1.0
2.0
.01
.1
.01
.01
.1
.1
Pieces/Pk
Bags/Pk
Pk/Cs
Approx.
Qty/Cs
25
50
50
35
30
20
10
5
5
5
8
6
2
4
4
4
4
6
500
1000
1000
700
960
720
67
DISPOSABLE GLASS
7078B PYREX Brand, Disposable Glass Serological, Shorty, Multi-Pack, Sterile,

Plugged
These shorty pipets, calibrated to deliver with blow-out, are ideal for use in confined areas.
The 5, 10, and 25 mL sizes have tooled tops and the 50 mL has a polypropylene top end. Negative
graduations on each pipet make it applicable for both serological and measuring procedures.
Packaged in plastic bags so several can be removed without contaminating the entire pack.
I.S.O. color-coding is printed directly on the tear strip.
Cat. No.
CLS7078B1
CLS7078B10
CLS7078B25
CLS7078B50*
Capacity Negative
(mL)
Grad. (mL)
1.0
10.0
25.0
50.0
0.5
4.0
5.0
3.0
Grad.
Interval
(mL)
Total
Pieces/
Bag
Length
(mm)
Qty/
Bags
Pk/Cs
Qty/Cs
.01
.2
.2
.5
215
215
300
358
10
10
5
5
25
20
20
2
2
4
10
500
400
400
50

*50 mL size features negative and reverse graduations.
WATC H G L A S S
9985 PYREX Brand, Watch Glass
These watch glasses possess high chemical durability, thus preventing contamination of solutions.
They are molded to the same radius of curvature for convenient stacking. The heavy wall and
uniform fire-polished edge provide mechanical strength. The outside diameter cannot be
controlled within close limits and a slight degree of out-of-round can be expected to occur.
Cat. No.
CLS998565
CLS998575
CLS998590
CLS9985100
CLS9985125
CLS9985150
Diam. Size (mm)
Fits Beaker Size (mL)
Qty/Cs
Qty/Cs
65
75
90
100
125
150
150
250
400
600
1000
2000
12
12
12
12
12
12
144
72
72
144
144
144
9990 PYREX Brand, Ribbed Watch Glass/Beaker Cover

Designed for use as a beaker cover. Ribs are molded into the glass so that they cant pop off as they
do when cane is sealed to standard watch glasses. Permits reflux of digestate and escape of excess
vapor. Eliminates risk of contamination from dropped hooks or props. Meets EPA requirements
for methods 3005, 3010, and 3020.
Cat. No.
CLS999075
CLS9990100
CLS9990125
68
Description
Fits Beaker Size (mL)
Dia. (mm)
Qty/Cs
Ribbed
Ribbed
Ribbed
250
600
1000
75
100
125
12
12
12
Equipment
H OT P L AT E S
PC-200 Hot Plate
Cornings exclusive glass-ceramic Pyroceram top is standard on all hot plates except the
Scholar 170. All Pyroceram units come with a two year warranty. Micro-chemistry size.
Cat. No.
Model
Power
Top Size
Temp.
Weight
Dimensions
(H x W x D)
CLS6795200
PC-200
4" x 5"
4.4" x 5.8" x 7.3"
PC-200
77-1022F
(25-550C)
77-1022F
(25-550C)
4 lbs. (1.8 kg.)
CLS6796200
120V/60Hz/
253W/2.1A
230V/50Hz/
253W/1.1A
4 lbs. (1.8 kg.)
4.4" x 5.8" x 7.3"
4" x 5"
Note: 230 volt CLS6796 hot plates come with UK plug.
PC-400 Hot Plate

Includes socket for optional external accessory. Hot top indicator light.
Cat. No.
Model
Power
Top Size
Temp.
Weight
Dimensions
(H x W x D)
CLS6795400
PC-400
5" x 7"
4.4" x 7.8" x 9.6"
PC-400
77-1022F
(25-550C)
77-1022F
(25-550C)
6 lbs. (2.7 kg.)
CLS6796400
120V/60Hz/
628W/5.3A
230V/50Hz/
628W/2.7A
6 lbs. (2.7 kg.)
4.4" x 7.8" x 9.6"
5" x 7"
PC-600 Hot Plate

Includes socket for optional external accessory. Hot top indicator light.
Cat. No.
Model
Power
Top Size
CLS6795600
PC-600
CLS6796600
PC-600
120V/60Hz/
1043W/8.7A
230V/50Hz/
1043W/4.5A
Temp.
Dimensions
(H x W x D)
Weight
10" x 10" 77-1022F 10 lbs. (4.5 kg.) 4.8" x 10.5" x 14.4"

(25-550C)
10" x 10" 77-1022F 10 lbs. (4.5 kg.) 4.8" x 10.5" x 14.4"
(25-550C)
Scholar 170 Hot Plate

An economically priced hot plate that has a white enameled steel top plate that provides heat
transfer up to 360C. Dual heat shields dissipate heat and keep the case cool to the touch.
Compact 5" x 5" size saves on bench space. UL/CUL approved, one year warranty.
Cat. No.
Model
Power
Top Size
Temp.
Weight
Dimensions
(H x W x D)
CLS6795170
PC-170
120V/60Hz/
250W/2.1A
5" x 5"
77-672F
(25-360C)
3 lbs. (1.3 kg.)
4" x 5" x 5"
PC-200/400/600 Hot Plate Accessories

Cat. No.
CLS400188*
Description
Use with Model
Temperature Controller B
PC-400/600
*Use Temperature Controller B with prefix 20 or higher.

**Use wireless remote control with hot plate serial number prefix 30 or higher.
69
EQUIPMENT
H OT P L AT E S / S T I R R E R S
PC-220 Hot Plate/Stirrer
Hot plate/stirrer units come with Cornings exclusive Pyroceram top and have a two year warranty.
Cat. No.
Model
CLS6795220
PC-220 120V/60Hz/
283W/2.4A
PC-220 230V/50Hz/
288W/1.3A
CLS6796220
Power
Top
Size
Stir
Range
4" x 5" 60-1100

RPM
4" x 5" 60-1100
RPM
Temp.
Weight
Dimensions
(L x W x D)
77-1022F
(25-550C)
77-1022F
(25-550C)
5.0 lbs.
4.4" x 5.8" x 7.3"
5.0 lbs.
4.4" x 5.8" x 7.3"
Temp.
Weight
Dimensions
(L x W x D)
77-1022F
(25-550C)
77-1022F
(25-550C)
7.0 lbs.
4.4" x 7.8" x 9.6"
7.0 lbs.
4.4" x 7.8" x 9.6"
Weight
Dimensions
(L x W x D)
Note: 230 volt CLS6796 hot plate/stirrer comes with UK plug.

Includes socket for optional external accessory. Hot top indicator.
Cat. No.
Model
CLS6795420
PC-420 120V/60Hz/
698W/5.9A
PC-420 230V/50Hz/
698W/3.1A
CLS6796420
Power
Top
Size
Stir
Range
5" x 7" 60-1100

RPM
5" x 7" 60-1100
RPM

Includes socket for optional external accessory. Hot top indicator.
Cat. No.
Model
CLS6795620
PC-620
CLS6796620
PC-620
Power
Top
Size
Stir
Range
Temp.
120V/60Hz/ 10" x 10" 60-1100 77-1022F 11.5 lbs. 4.8" x 10.5"x 14.4"
1113W/9.3A
RPM (25-550C)
230V/50Hz/ 10" x 10" 60-1100 77-1022F 11.5 lbs.
4.8H x 10.5
1113W/4.9A
RPM
(25-550C)
STI R R ERS
PC-210 Stirrers
Micro-chemistry size.
Cat. No.
Model
Power
CLS6795210
PC-210
CLS6796210
PC-210
120V/60Hz/
33W/0.3A
230V/50Hz/
38W/0.17A
Top
Size
Top Style
Temp.
Weight
Dimensions
(L x W x D)
4" x 5"
Pyroceram
4.5 lbs.
4.4" x 5.8" x 7.3"
4" x 5"
Pyroceram
60-1100
RPM
60-1100
RPM
4.5 lbs.
4.4" x 5.8" x 7.3"
Note: 230 volt CLS6796 stirrers come with UK plug.
PC-410 Stirrers
Includes socket for optional external accessory.
Cat. No.
Model
Power
CLS6795410
PC-410
CLS6796410
PC-410
120V/60Hz/
73W/0.7A
230V/50Hz/
73W/0.4A
Top
Size
Top Style
Temp.
5" x 7"
Pyroceram
5" x 7"
Pyroceram
60-1100
RPM
60-1100
RPM
Weight
6.5 lbs. 4.4" x 5.8" x 9.6"

6.5 lbs. 4.4" x 5.8" x 9.6"
70
Dimensions
(L x W x D)
EQUIPMENT
PC-610 Stirrers
Includes socket for optional external accessory
Cat. No.
Model
CLS6795610
PC-610
CLS6796610
PC-610
Top
Size
Power
Top Style
Temp.
Weight
120V/60Hz/ 10" x 10" Pyroceram 60-1100 10 lbs.

73W/0.7A
RPM
(4.5 kg.)
230V/50Hz/ 10" x 10" Pyroceram 60-1100 10 lbs.
73W/0.4A
RPM
(4.5 kg.)
Dimensions
(L x W x D)
4.8" x 10.5" x 14.4"

4.8" x 10.5" x 14.4"
PC-611 Stirrers
The PC-611 is designed to stir large volumes of liquid with ease. The stirrer is designed for 5 gallon
vessels (19L), but can stir up to 10 gallons. This powerful stirring is achieved with a very compact
design that conserves bench space. The stirrer uses a magnet that is constructed out of rare earth
metals for exceptional coupling strength. The magnets strength also centers the stir bar quickly inside
the vessel. Heavy duty motor and rugged plastic (ABS) top will provide years of reliable service.
UL/CUL approved, one year warranty. 230V version is CE approved. Special Features: The
PC611 achieves vigorous stirring with a more compact unit at a lower cost than competitive units.
The high volume stirrer can handle many applications that previously required an overhead stirrer.
Power
Top
Size
Top
Style
Stir
Range
Weight
Dimensions
(L x W x D)
Cat. No.
Model
CLS6795611
PC-611 120V/50-60Hz/ 11" x 11" Plastic 100-1500 11.0 lbs. 4.8" x 12.0" x 14.4"
144W/1.2A
RPM
(5 kg.)
PC-131/141 Stirrers
The plastic top PC-131 is designed for laboratories that need only occasional use from their stirrers.
These models are lightweight and economically priced. Carries a one year warranty.
Cat. No.
Model
Power
CLS440742
PC-131 115V/50-60Hz/
4W/.03A
Top
Size
Top
Style
Stir
Range
Weight
Dimensions
5"x 5"
Plastic
<100-1000
RPM
1.8 lbs.
(.8 kg.)
2.0" x 5.0" x 5"
*Comes with Continental European plug and are CE approved.
Scholar 171 Stirrer

The Scholar 171 Stirrer provides compact design, vigorous stirring with alternating current motor
for longer life and rugged construction. UL/CUL approved, one year warranty.
Cat. No.
CLS6795171
71
Model
Power
Top Size Top Style Stir Range
PC-171 120V/60Hz/ 5"x 5"

29W/.24A
Plastic
Weight
Dimensions
100-1600 4 lbs. 3.2" x 5.0" x 5.0"

RPM
(1.8 kg.)
EQUIPMENT
SS4I Stirrers
Four position slow speed stirrer with integral control to accommodate up to four 1L vessels.
Multiple positions allow the user to duplicate stirring conditions in up to four vessels.
Cat. No.
Nom.
Stir
Speed
Vol.
Speed Range No. per
Descr. Control (RPM) Pos. Pos.
CLS440814
4 x 1L Integral 10-150
1L
130
CLS440821
4 x 1L Integral 10-150
1L
130
Max.
Vessel
Dim.
(Diam) LxWxH
(mm)
(mm)
Plat. Wgt. Motor

Mat. (kg) Type Model Power
260 x Glass
260 x 70 Filled
Resin
260 x Glass
260 x 70 Filled
Resin
DC, SS4I 120V/

Stepper
60Hz
DC, SS4I 230V/

Stepper
50Hz
SS4R Stirrers
Four position slow speed stirrer with remote control to accommodate up to four 1L vessels.
Remote control units allow operation from outside an incubator.
72
Cat. No.
System
Descr.
Nom.
Stir
Speed
Vol.
Speed
Range No. per
Control (RPM) Pos. Pos.
CLS440816
4 X 1L
Remote 10-150
1L
Max.
Vessel Dimen.
(Diam) LxWxH
(mm) (mm)
130
Plat. Wgt. Motor

Mat. (kg) Type
260 x Glass
260 x 70 Filled
Resin
DC,
Stepper
Power
120V/
60Hz
Introducing the New Sigma-Aldrich

Interactive Virtual Stockroom
Where products and information are literally at your fingertips!
Looking for information on solvents, LabBasics,
EquipBasics, or general chemistry products?
Interested in learning more about our E-commerce
and on-site stocking options? The Virtual Stockroom
has easily navigated screens that provide you with
all your product and information needs.
Navigate the Virtual Stockroom just as you would a real stockroom.

Along with finding solvents in the flammables cabinet and
reference materials on the bookshelf, youll also find the following:
Products:
Solvents arranged by grade and container type
LabBasics products (commonly used chemical reagents)
Aldrich custom glassware
EquipBasics (commonly used laboratory equipment)
Technical Information:
Aldrichimica Acta current and back issues
Aldrich technical bulletins
Programs and Services:
Chemical structure search
Creating and maintaining a list of favorite products
Current Promotions
Supplier product cross-matching
On-site stocking and inventory management options
Quick Quote
E-commerce solutions
New Lab Start-up Program
View the Virtual Stockroom at:

sigma-aldrich.com/virtualstockroom
Bookmark this page and allow us to become your personal stockroom!
Web site Help Desk

877-856-5586
Web site Customer Support 800-286-2635
EDI & Business
Integration Projects
800-325-4940
Technical Service
To discuss product-specific questions:
Telephone
800-231-8327
Internet
sigma-aldrich.com/techinfo
To Make a Payment
Payers east of the Mississippi remit to:
P.O. Box 932594
Atlanta, GA 31193-2594
Bid Requests/Quotation
Fax
800-554-6541
Payers west of the Mississippi remit to:

P.O. Box 951524
Dallas, TX 75395-1524
LEADERSHIP IN LIFE SCIENCE, HIGH TECHNOLOGY AND SERVICE

ALDRICH BOX 355 MILWAUKEE WISCONSIN USA
HWX
01936-40541
0024
CLS-CAT-SIAL-001
Electronic Commerce Inquiries
800-325-3010 or 414-438-3850
sigma-aldrich.com/order
800-325-5052
Printed in USA 2/05
Telephone
Internet
FAX
2005 Corning Incorporated
To Place an Order

Corning Glass Catalog

Uploaded by

Copyright:

Available Formats

Corning Glass Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Corning Glass Catalog

Uploaded by

Copyright:

Available Formats

LE

Corning Glassware and Equipment Catalog

Approx. Length (mm)

8930 PYREX Brand, Connecting, Distilling,

Approx. O.D. (mm)

Inner Joint Size

8947 PYREX Brand, Vacuum, Connecting, 105 Angle,

Inner and Outer Joint Size

9000 PYREX Brand, Connecting, 75 Angle, Three-Way,

Inner and Outer

9040 PYREX Brand, Connecting, Claisen type, Three-Way,

Inner and Outer

9050 PYREX Brand, Connecting, Claisen Type, Three-Way,

Inner and Outer

Visit www.sigma-aldrich.com/equipment for additional product and technical information.

1003 PYREX Brand, Griffin, Heavy Duty, Graduated

Reference: ASTM E-960.

Visit www.sigma-aldrich.com/equipment for additional product and technical information.

For beaker cover, See Cat. No. CLS9985.

1010 PYREX Brand, Handle

Approx. O.D. x Height (mm)

1060 PYREX Brand, Berzelius, Tall Form, with Spout, Graduated

For beaker cover, See Cat. No. CLS9985.

Visit www.sigma-aldrich.com/equipment for additional product and technical information.

61220 PYREXPLUS Brand, Aspirator, Protective Coating,* Outlet for Tubing

1260 PYREX Brand, Centrifuge, Heavy Wall

1261 PYREX Brand, Centrifuge, Heavy Wall, Screw Cap

1285 PYREX Brand, Blake Culture, Rectangular

1290 PYREX Brand, Roux Culture, Offset Neck

1295 PYREX Brand, Povitsky, Diphtheria Toxin

Visit www.sigma-aldrich.com/equipment for additional product and technical information.

1340 PYREX Brand, Dropping, Bulb and Pipet, Glass Stopper

1367 CORNING Brand, Milk Dilution, Screw Cap

1368 CORNING Brand, Milk Dilution, Wide Mouth, Screw Cap

1372 CORNING Brand, Milk Dilution, Screw Cap, Graduated

For cap only, See No. CLS999928, G.P.I. No. 28-400.

Visit www.sigma-aldrich.com/equipment for additional product and technical information.

1395 PYREX Brand, Media, Storage, Screw Cap

Light Gray Cap

Gray Membrane Cap

Cap, Open Top,

Cap, Open Top,

Visit www.sigma-aldrich.com/equipment for additional product and technical information.

1396 PYREX Brand, Media Storage, Screw Cap, Graduated, Square

Bottle, Square, Cap, Pour Ring

61626 PYREXPLUS Brand Bottles, Media, Storage, Screw Cap

*Covered by U.S. Patent #4940613.

Visit www.sigma-aldrich.com/equipment for additional product and technical information.

1500 PYREX Brand, Reagent, Narrow Mouth, PYREX

For stopper only, see Cat. No. 7575.

61500 PYREXPLUS Brand, Reagent, Narrow Mouth, Protective Coating*

For stopper only, see Cat. No. CLS7575.

1585 PYREX Brand, Serum

1595 PYREX Brand, Solution

Visit www.sigma-aldrich.com/equipment for additional product and technical information.

1596 PYREX Brand, Solution, Graduated, Carboy

61596 PYREXPLUS Brand, Solution, Protective Coating,* Graduated, Carboy

1620 PYREX Brand, Hubbard-Carmick, Specific Gravity

Reference: ASTM Test D-70, D-1429 and D-115.

1682 PYREX Brand, Weighing, Low Form, Short Length Joints