Model 2100b

Bellows Sealed Globe Valve Model 2100B
Bellows protected from the flow
Model 2100B is designed for critical applications

involving hazardous media.
Member of
2013 APPROVAL
according to
NEW GEST 06/318
THE CHLORINE INSTITUTE
descote is known worldwide by the

chemical industry as THE VALVE
SPECIALIST for HAZARDOUS MEDIA. This
expertise is recognized by our EuroChlor
valve approvals and recommendations by
the Chlorine Institute.
General applications
Model 2100B is designed for dangerous,
corrosive, inflammable, pyrophoric media
such as chlorine , fluorine, hydrogen
chloride, hydrogen fluoride, phosgene,
chlorosilanes, nitrogen trifluoride (NF3) etc.
and all category M fluids as per ASME
B31.3.
Model 2100B
is EuroChlor GEST 06/318
approved under certificate n13/03
for size 1" to 6"" (DN25 to DN150)
Model 2100B is particularly recommended
for applications where the bellows has to
be protected from the flow: liquefied gas,
erosion, flashing, high velocity, etc.
It is commonly used on the following
processes and production units:
Chlor-alkali, PCA (polycarbonate), TDI,
MDI, and HDI (Isocyanates), bleaching,
AHF Alkylation (P.P. and UOP, alkylation
and LAB processes), ECH (Epichlorhydrin),
VCM, pesticides, insecticides, CFCs, HFA,
HFC, PTFE, etc.
And on many other processes using

dry chlorine (Cl2), phosgene (COCl2), dry
hydrogen chloride (A. HCl), anhydrous
fluorhydric acid (A. HF), etc.
In addition, descote proposes a wide range

of technical solutions such as double
containment, central monitoring, zero ppm,
etc.
descote also manufactures gland type

globe valve Model 1500B and bellows
sealed globe valves Model 2500 and 2020
for the above applications (see
documentation).
Selection of the most appropriate valve
design depends upon many factors
including local and international standards
and regulations. It should also include
service conditions, maintenance, safety
and emissions monitoring requirements.
descote valve specialists are there to help

you with your choice.
Quality Assurance
Design and manufacturing is ISO 9001
approved. Our manufacturing processes
are also approved by the TV.
www.descote.com
descote reserves the right to change the contents without notice
DEFNB-0002-EN-1304

technical data
Features
Ease of operation
Large diameter, long lasting heavy duty handwheel
Yoke bushing with needle bearings and lubrication fittings
Position indicator, torsion limiter
One-piece, non rotating stem is cold rolled for concentricity
and polished to ensure packing integrity and smooth operation
Zero emissions
Stem sealed by multi wall hydroformed bellows
Long bellows fully housed in an extended bonnet for protection against erosion
For added safety, dual sealing to the atmosphere is ensured, by means of
- additional stuffing box along the stem
- metallic gasket and sealweld on the bonnet
Fully entrapped body/bonnet gasket ensures joint integrity
Zero seat leakage
Hard faced, knife edge seating to cut through process impurities
High quality level 2 castings, as per ASTM E446
Bellows to eliminate fugitive emissions

Metal bellows welded to the stem and bonnet provide a continuous metallic barrier between the
process fluid and the atmosphere to achieve zero emissions.
For added security there is also a stuffing box for secondary sealing.
The bellows are multi walled, hydroformed and guaranteed for 10 000 full cycles at the maximum
design pressure for the valve. All bellows can be equipped with a leak detection port for continuous
monitoring.
Manufacturing range
We classify our manufacturing range as follows:
Class A our most standard products finished valves, raw materials and semi-finished components always available.
Class B made to order products these are class A products adapted to meet specific customer requirements, they may use alternative materials,
have accessories fitted (e.g. limit switches), have minor design changes (e.g. special flange drilling) or have special tests and controls.
Dimensions
Rating
Temperature
Standard range - Class A Products
Additional - Class B Products
DN 10 to 300 - 3/8 to 12
PN25/40/64/100 - ANSI Class 150/300/600
-101C to +400C / -150F to +750F
Up to PN420 - ANSI Class 2500

-196C to +800C / -320F to +1500F
Applicable construction standards

ANSI B16.34, ANSI B31.3 (cat. M), ASME III, ASME VIII
BS 1873
EN 13709 / EN12569 / TRD 100 / TRD 110 / AD A4 / AD W0 / HP 0 / TRB 801 Nr.45
JIS B, GOST, HG and other standards
EN 13709 / CODAP / RCC.M
NACE, Fire security, etc.
The standard of construction is always adapted to the customer and the country of utilization.
End connections
1.
2.
3.
4.
End type
BW
Threaded
SW
Flanges
DN
10 to 300 (3/8" to 12")
10 to 50 (3/8" to 2")
10 to 50 (3/8" to 2")
10 to 300 (3/8" to 12")
PN
PN20 to PN420
PN20 to PN420
PN20 to PN420
PN20 to PN420
ANSI Class
Class 150 to 2500
Class 150 to 2500
Class 150 to 2500
Class 150 to 2500 available in RF, Male and Female, Tongue & Groove, RTJ, etc.

technical data
Face to face dimensions
Valves are manufactured according to international dimensional standards: ISO 5752 - ANSI B16.10 - NF EN 558 - BS 2080 - JIS B2002 - HG GOST
Class A Products
Forged
Cast
mm
15
20
25
40
50
80
100
150
200
250
300
Standard
inch
1/2"
3/4"
1"
1"1/2
2"
3"
4"
6"
8"
10"
12"
PN16/25/40
Cl 150
PN20
PN50 GVF Cl 300 GVF
PN50 BVF Cl 300 BVF
JIS 20K serie 24
JIS 20K Special
L
L
L (1)
L (2)
L
L (3)
H
V
L
L
H
V
130
152
152
140
152
140
288
150
165
210
289
225
150
178
178
152
178
160
322
175
190
230
289
225
160
127
203
165
203
180
322
175
216
230
289
225
200
165
229
190
229
240
420
225
241
260
434
275
230
203
267
216
267
300
435
225
292
300
434
275
310
241
318
283
318
310
523
350
356
380
541
500
350
292
356
305
356
350
548
350
432
430
612
750
480
406
444
403
444
400/440
782
750
559
550
792
750
600
495
559
_
559
540
782
750
660
650
808
750
730
622
622
_
622
_
850
698
711
_
970
750
787
775
910
750
1100
1000
838
900
1100
1000
Cl 600
PN110
PN64/100
711
_
APPROVAL GEST 06/318

(1) GVF Face to Face standard is interchangeable with globe valves
(2) BVF Face to Face standard is interchangeable with gate, plug and ball valves - ISO PN50/ ANSI Class 300 lbs/ ANSI Class 600 lbs
(3) Valves are interchangeable with some Japanese manufacturers special dimensions
Materials selection
We manufacture valves in a wide range of materials, from carbon steels to special alloys. Materials are selected according the actual service
conditions (fluid, temperature, pressure, etc.) and environmental circumstances (tropical location) to ensure optimum life of the valve:
our standard manufacturing range is based upon the most widely used materials, Class A Bill of Materials (BoM)
in addition, descote offers a Class B materials selection to fulfill customers specific needs.
(ASTM standards)
body & bonnet
disc
bellows
stem
seating
gasket*
packing*
bolts & nuts
type 22
A350 LF2 or A352 LCC
Duplex S.S.
Hastelloy C276
Stainless Steel
Stellite 21
PTFE
PTFE
L7M/7M
Class A BoM
type 25
A350 LF2 or A352 LCC
Duplex S.S.
Hastelloy C276
Hastelloy C276
Stellite 21
PTFE
PTFE
L7M/7M
Class B materials selection

type 26
A350LF2 or A352 LCC
Hastelloy C276
Hastelloy C276
Hastelloy C276
Stellite 21
PTFE
PTFE
L7M/7M
A105 / A216 WCC, A350 LF3 / A352 LC3

A182 Gr 304, 304L, 316, 316L, 316H
A351 CF8, CF3, CF8M, CF3M
Alloy 20, Duplex, MONEL400, MonelK500
Soft seatings,
Inconel, Hastelloy
For other materials, please consult descote
* Graphite available acc. to temperature limits
Inspection and quality control

descote production specifications have very strict non destructive testing and examination requirements. These are based upon:
National and international standards (API 600, ASME B31.3.)
+ industrial standards (EuroChlor, Chlorine Institute)
+ customers specific requirements
+ our own industrial experience
These requirements are systematically used and include the following examinations:
X-ray, U.S., magnetic particle, dye-pen on welds and machined parts, wall thickness, dimensions, surface finish and hardness.
descote provides this high level of inspection and quality control to complement customer specifications.
Tests
All valves are tested according to international standards.
In addition, we systematically perform:
100% HP gas seat test with an acceptance criteria of 0 bubble 2 minutes duration minimum.
This testing ensures zero seat leakage on every valve delivered.
Certificates and traceability

descote applies the ISO 9001 standard to the complete production process. This procedure systematically includes:
an individual identification number
a 3.1 certificate for traceability of materials, tests, examinations and controls.
The valve identification number provides complete traceability for the lifetime of the valve.

range extension
Model 2100B can be delivered with

pneumatic, electrical or hydraulic actuators.
Gland packed globe valve Model 1500B.
Bellows sealed globe valve Model 2500.

Bellows exposed to the flow.
Model 2100B can be assembled with special

leak detection for emission monitoring.
Liquefied gas storage valves Model 2200.
Model 2020 bellows sealed instrumentation

globe valves.
descote s.a.s
9 avenue Jean Jaurs
69320 Feyzin - France
Phone: +33 4 72 89 25 00
Fax: +33 4 72 89 25 25
E-mail : info@descote.com
Web : www.descote.com
descote valves are available in angle pattern or 3 way valve for use with dual safety relief valves.

Model 2100b

Uploaded by

Copyright:

Available Formats

Model 2100b

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Model 2100b

Uploaded by

Copyright:

Available Formats

Bellows Sealed Globe Valve Model 2100B

Bellows protected from the flow

Model 2100B is designed for critical applications

THE CHLORINE INSTITUTE

descote is known worldwide by the

And on many other processes using

In addition, descote proposes a wide range

descote also manufactures gland type

descote valve specialists are there to help

descote reserves the right to change the contents without notice

Bellows Sealed Globe Valve Model 2100B

Bellows to eliminate fugitive emissions

Standard range - Class A Products

Additional - Class B Products

Up to PN420 - ANSI Class 2500

Applicable construction standards

descote reserves the right to change the contents without notice

Bellows Sealed Globe Valve Model 2100B

APPROVAL GEST 06/318

Class B materials selection

A105 / A216 WCC, A350 LF3 / A352 LC3

* Graphite available acc. to temperature limits

Inspection and quality control

Certificates and traceability

descote reserves the right to change the contents without notice

Bellows Sealed Globe Valve Model 2100B

Model 2100B can be delivered with

Gland packed globe valve Model 1500B.

Bellows sealed globe valve Model 2500.

Model 2100B can be assembled with special

Liquefied gas storage valves Model 2200.

Model 2020 bellows sealed instrumentation

descote reserves the right to change the contents without notice

You might also like