VALVE BODY MATERIALS

Australian Pipeline Valves are manufactured in a wide range of materials as follows:

Material Common Casting Spec. DIN W.
Material Type Forging Spec UNS DIN Application
Group Name Equivalent No
General non-corrosive service from
Carbon Steel CS C-Mn-Fe A105N K03504 A216-WCB C22.8 DIN 17243 1.0460
-20ºF (-29ºC) to 800ºF (427ºC)
A352-LC1 General non-corrosive service from
Low Temperature
LTCS C-Mn-Fe A350-LF2 K03011 A352-LCB TSTE 355 DIN 18103 1.0566 -50ºF (-46ºC) to 650ºF (340ºC), LF2 to
Carbon Steel
A352-LCC 800ºF (427ºC)

Low Temperature
Nickel Steel 3.1/2Ni A350-LF3 K32025 A352-LC3 10Ni14 1.5637 -150ºF (-101ºC) to 650ºF (340ºC)
Alloy Steel
Moly Steel C-1/2Mo A182-F1 K12822 A217-WC1 15Mo3 1.5415 Up to 875ºF (468ºC)
Low Alloy Steel

1.1/4Cr-1/2Mo A182-F11 cl2 K11572 A217-WC6 13CrMo44 1.7335 Up to 1100ºF (593ºC)

Chrome Moly

2.1/4Cr-1Mo A182-F22 cl3 K21590 A217-WC9 10CrMo910 1.7380 Up to 1100ºF (593ºC), HP steam
Alloy Steel

5Cr-1/2Mo A182-F5a K41545 A217-C5 12CrMo195 1.7362 High temp. refinery service
9Cr-1Mo A182-F9 K90941 A217-C12 X 12 CrMo 9 1 1.7386 High temp. erosive refinery service
9Cr-1Mo-V A182-F91 A217-C12A X 10 CrMoVNb 9 1 1.4903 High pressure steam
0.04% min. carbon for temp. >1000ºF
304 : 18Cr-8Ni A182-F304 S30400 A351-CF8 DIN X5CrNi 18 9 1.4301
(538ºC)
304L : 18Cr-8Ni A182-F304L S30403 A351-CF3 X 2 CrNi 19 11 1.4306 Up to 800ºF (427ºC)
304H : A182-F304H S30409 A351-CF10 n/a n/a
0.04% min. carbon for temp. >1000ºF
316 : 16Cr-12Ni-2Mo A182-F316 S31600 A351-CF8M DIN X5CrNiMo 18 10 1.4401
(538ºC)
300 series S.Steel
Austentic S.Steel

316L : 16Cr-12Ni-2Mo A182-F316L S31603 A351-CF3M X 5 CrNiMo 17 12 2 1.4404 Up to 800ºF (427ºC)

316H : A182-F316H S31609 A351-CF10M n/a n/a
316Ti : A182-F316 Ti S31635 X 6 CrNiMoTi 17 12 2 1.4571 Special grade
321 : 18Cr-10Ni-Ti A182-F321 S32100 X 6 CrNiTi 18 10 1.4541 0.04%min. carbon (grade F321H) and
heat treat at 2000ºF (1100ºC) for service
321H A182-F321H S32109 n/a n/a
Stainless Steel

temps. >1000ºF (538ºC)

347 : 18Cr-10Ni-Cb(Nb) A182-F347 S34700 A351-CF8C DIN 8556 1.4550 0.04%min. carbon (grade F347H) and
heat treat at 200ºF (1100ºC) for service
347H A182-F347H S34709 n/a n/a temps. >1000ºF (538ºC)
317L A182-F317L S31703 A351-CG3M* X2CrNiMo18-16-4 1.4438
Alloy 20 28Ni-19Cr-Cu-Mo A182-F20* N08020 A351-CN7M† DIN 1.4500 2.4660 Service to 600ºF (316ºC)*

A182-F51 S31803 A351-CD3MN X2CrNiMoN22-5-3 Service to 600ºF (316ºC) - The original

S31803 UNS designation has been
Duplex 2205 22Cr-5Ni-3Mo-N 1.4462
supplemented by S32205 which has
S32205 A890-J92205* DIN 10088-1 (95) higher minimum N,CR, and Mo

Super Duplex A351-CD4MCu* X2CrNiMoN27-7-4

25Cr-7Ni-4Mo-N A182-F53 S32750 1.4501 Service to 600ºF (316ºC)
2507 A890 5A* DIN 10088-1 (95)
Super Duplex
25Cr-7Ni-3.5Mo-N-Cu-W A182-F55 S32760 A995-CD3MWCuN Service to 600ºF (316ºC)
F55
Super Austenitic X1CrNiMoCuN20-18-7
20Cr-18Ni-6Mo A182-F44 S31254 A351-CK3MCuN 1.4547 Service to 600ºF (316ºC)
6Mo DIN 10088-1 (95)
Incoloy 800 33Ni-42Fe-21Cr B564-N08800 N08800 X10NiCrAlTi32-20 1.4876 Service to 1000ºF (538ºC)
Nickel-Iron Alloy Service to 600ºF (316ºC) for N02200,
Incoloy 825 42Ni-21.5Cr-3Mo-2.3Cu B564-N08825* N08825 A494-CU5MCuC* DIN 17744 2.4858
1200ºF (648ºC) for N02201
B160-N02200
Nickel Nickel 99/95Ni N02200 A494-CZ-100* NW2200 1.7740
(bar)
Monel 400 67Ni-30Cu B564-N04400 N04400 A494-M35-1 DIN 17730 2.4360
Nickel-Copper
Monel 500 B564-N05500* N05500 2.4375
Nickel-Alloy 904L 904L* N08904 n/a Z2 NCDU 25-20 1.4539
Inconel 600 72Ni-15Cr-8Fe B564-N06600 N06600 A494-CY40* DIN 17742 2.4816
Nickel
Superalloys Inconel 625 60Ni-22Cr-9Mo-3.5Cb B564-N06625 N06625 A494-CW-6MC* 2.4856
Hastelloy C-276 54Ni-15Cr-16Mo B564-N10276 N10276 A494-CW-2M* NiMo 16 Cr 15 W 2.4819
Titanium Titanium 98Ti B381-Gr2 R50400 B367-C2* Ti 2 3.7035 Special grade

† Cast CN7M only rated to 150ºC, however ‘New Alloy 20’ grade CN3MCu is available which is to be rated to at least 316ºC.
* Now discontinued in ANSI B16.34 - 2009.

Disclaimer: These charts are for reference only, Australian Pipeline Valve cannot be held liable for any damages incurred due to the use of these
tables. Temperatures shown must be analysed in conjunction with ASTM P/T charts and manufacturers recommendations for each valve type.

For technical references and ASTM/ASME cross reference information on stainless, duplex, chrome-moly and alloy steel used in valves
& piping systems in the petrochemical and refining go to our website: http://www.australianpipelinevalve.com.au

9-15 Boolcunda Avenue Salisbury Plain, South Australia 5109

www.australianpipelinevalve.com.au Telephone +61 (0)8 8285 0033 Fax +61 (0)8 8285 0044
admin@australianpipelinevalve.com.au
 MAJOR VALVE MATERIAL GROUPS
FORGED CAST
CARBON STEEL
ASTM A105N ASTM A216 WCB/WCC
ASTM A350 LF2 ASTM A352 LCB/LCC
ALLOY STEEL
ASTM A350 LF3 ASTM A352 LC3
ASTM A182 F5a ASTM A217 C5
ASTM A182 F9 ASTM A217 C12
ASTM A182 F11 ASTM A217 WC6
ASTM A182 F22 ASTM A217 WC9
ASTM A182 F91 ASTM A217 C12A
AUSTENITIC STAINLESS STEEL
ASTM A182 F304/F304L ASTM A351 CF8/CF3
ASTM A182 F316/F316L ASTM A351 CF8M/CF3M
ASTM A182 F321
ASTM A182 F347 ASTM A351 CF8C
ASTM A182 F44 (6MO) ASTM CK3MCuN
ASTM A182 F20* (ALLOY 20) A351 CN7M
FERRITIC-AUSTENITIC STAINLESS STEEL
ASTM A182 F51 - UNS S31803† (DUPLEX S.S.) A890 GR.4A*/ A351 CD3MN
ASTM A182 F53 - UNS S32750 (SUPER DUPLEX S.S.) A890 GR.5A*/ A351 CE8MN
ASTM A182 F55 - UNS S32760 (SUPER DUPLEX S.S.) A995 CD3MWCuN/6A
NICKEL ALLOY
INCONEL 825 - UNS N08825 ASTM B564 - N08825 A484 CU5MCuC*
INCONEL 600 - UNS N06600 ASTM B564 - N06600 A494 CY40*
INCONEL 625 - UNS N06625 ASTM B564 - N06625 A494 CW6MC*
MONEL 400 - UNS N04400 ASTM B564 - N04400 A494 M35-1
TITANIUM
ASTM B381 GR.F2 ASTM B367 GR.C2
ASTM B381 GR.F3 ASTM B367 GR.C3

† Grade UNS31803 now supplemented by UNS32205. UNS32205 which dual conforms and is now often specified.
* No longer referenced in ANSI B16.34 - 2009.

APV can manufacture exotic grades such as Nickel, Super-Duplex F55 and Monel (ASTM A494-M35-1), Cd4M-Cu, Hastelloy C
(ASTM A-494 CW12MW), 317 (C8G8M) in short lead-time.

For other ANSI, ASME, ISO, API, BS, API valve related technical cross reference charts and tables relating to standards, codes,
pressure, temperature, application, suitability, equivalents, body & trim materials, valve manufacturing & test standards, etc., go to the
technical section of our website: http://www.australianpipelinevalve.com.au

We manufacture valves in API600, API602, API6D, API603, BS1868, API6A and numerous other standards including Butterfly, Ball,
Check, Globe, Gate, Plug and Needle valves.

www.australianpipelinevalve.com.au
 VALVE TRIM MATERIALS
The following tables detail standard trim material available at Australian Pipeline Valve (APV). Special trims are available upon request.

APV TRIM CONFIGURATIONS

API Trim Min. Hardness
Nonimal Trim Trim code Stem Disc/Wedge Seat
No (Brinell)
1 F6 F6 410 (13Cr) F6 (13Cr) 410 (13Cr) 250
2 304 304 304 (18Cr-8Ni) 304 (18Cr-8Ni) 304 (18Cr-8Ni) not specified
3 310 310 (25Cr-20Ni) 310 (25Cr-20Ni) 310 (25Cr-20Ni) not specified
4 Hard 410 F6-H 410 (13Cr) F6 (13Cr) F6 (13Cr) 275
5 410 Full Hard faced F6-HF 410 (13Cr) F6+St Gr6 (CoCr Alloy) 410+St Gr6 (CoCr Alloy) 350
5A 410 Full Hard faced F6-HF 410 (13Cr) F6+Hardf. NiCr Alloy 410+Hardf. NiCr Alloy 350
6 410 and Ni-Cu F6-HFS 410 (13Cr) F6 (13Cr) Monel 400 ® (NiCu Alloy) 250/175
7 410 and Full Hard 410 410 (13Cr) F6 (13Cr) F6 (13Cr) (750 HB) 250/750
8 410 and Hard faced F6-HFS 410 (13Cr) F6 (13Cr) 410+St Gr6 (CoCr Alloy) 250/350
8A 410 and Hard faced F6-HFS 410 (13Cr) F6 (13Cr) 410+Hardf. NiCr Alloy 250/350
9 Monel Monel Monel® (NiCu Alloy) Monel® (NiCu Alloy) Monel 400 ® (NiCu Alloy) not specified
10 316 316 316 (18Cr-Ni-Mo) 316 (18Cr-8Ni-Mo) 316 (18Cr-8Ni-Mo) not specified
11 Monel and Hard faced Monel-HFS Monel® (NiCu Alloy) Monel® (NiCu Alloy) Monel 400 ® St Gr6 350
11A Monel and Hard faced Monel-HFS Monel® (NiCu Alloy) Monel® (NiCu Alloy) Monel 400 ® Hardf. NiCrA 350
12 316 and Hard faced 316-HFS 316 (18Cr-Ni-Mo) 316 (18Cr-8Ni-Mo) 316+St Gr6 350
12A 316 and Hard faced 316-HFS 316 (18Cr-Ni-Mo) 316 (18Cr-8Ni-Mo) 316 Hardf. NiCr Alloy 350
13 Alloy 20 Alloy 20 Alloy 20 (19Cr-29Ni) Alloy 20 (19Cr-29Ni) Alloy 20 (19Cr-29Ni) not specified
14 Alloy 20 & Hard faced Alloy 20-HFS Alloy 20 (19Cr-29Ni) Alloy 20 (19Cr-29Ni) Alloy 20 St Gr6 350
14A Alloy 20 & Hard faced Alloy 20-HFS Alloy 20 (19Cr-29Ni) Alloy 20 (19Cr-29Ni) Alloy 20 hardf. NiCr Alloy 350
15 304 Full Hard faced 304-HF 304 (18Cr-8Ni-Mo) 304+St Gr6 304+St Gr6 350
16 316 Full Hard faced 316-HF 316 HF (18Cr-8Ni-Mo) 316+St Gr6 316+St Gr6 350
17 347 Full Hard faced 347-HF 347 HF (18Cr-10Ni-Cb) 347+St Gr6 347+St Gr6 350
18 Alloy 20 Full Hard faced Alloy-HF Alloy 20 (19Cr-29Ni) Alloy 20+St Gr6 Alloy 20+St Gr6 350
n/a Alloy 625 Alloy 625 Alloy 625 Alloy 625 Alloy 625

TRIM MATERIAL EQUIVALENT GRADES

DIN W
TRIM UNS TYPE Grade (forged) ASTM wrought DIN
NO.
F6 UNS S41000 13Cr ASTM A182 F6a A276-410 DIN X12Cr13 1.4006
304 UNS S30400 18-8 Cr-Ni ASTM A182 F304 A276-304 DIN X5CrNi 18 10 1.4301
316 UNS S31600 18-8 Cr-Ni (18-10-2) ASTM A182 F316 A276-316 DIN X5CrNiMo 18 10 1.4401
321 UNS S32100 18 Cr-10 Ni-Ti ASTM A182 F321 A276-321 DIN X6CrNiTi 18 10 1.4541
347 UNS S34700 18 Cr-10 Ni-Cb ASTM A182 F347 A276-347 DIN X6CrNiNb18 10 1.4550
MONEL® UNS N04400 67Ni-30Cu ASTM B564-N04400 B164-N04400 BDIN 17743 2.4360
ALLOY 20 UNS N08020 28Ni-19Cr-Cu-Mo ASTM A182-F20* ASTM B473 DIN 14500 2.4660
ALLOY 625 UNS N06625 60Ni-22Cr-9Mo-3.5Cb ASTM B564-N06625 ASTM B564-N06625 DIN 17361 2.4865
C276 UNS N10276 54Ni-15Cr-16Mo ASTM B564-N10276 ASTM B574-N10276 DIN NiMo 16 Cr 15 W 2.4819
17/4PH UNS S17400 0Cr17Ni4Cu4Nb ASTM A705 UNS S17400 ASTM A564 UNS S17400 X5CrNiCuNb17-4-4 1.4548
St. Gr6† UNS R30006 Co Cr-A AMS 5894 Stellite(R) Gr6
† Hard facing weld overlay
* No longer referenced in ANSI B16.34 - 2009.
Australian Pipeline Valve are short lead time valve manufacturers. Tell your purchasing staff, engineers and plant managers about us!

www.australianpipelinevalve.com.au

Valve Material Types Equivalent R2 - AA

www.australianpipelinevalve.com.au